Rapid and reliable thickness measurement for metalworking quality control
Thickness measurement ensures precise control of sheet and component dimensions in metalworking by providing immediate, process-integrated feedback that reduces scrap and rework. Handheld instruments such as the micrometer, caliper and fine‑needle thickness gauge serve distinct roles: the micrometer with its ratchet delivers a consistent contact pressure, the caliper offers versatility for general measurements, and the fine‑needle gauge provides reproducible results on elastic or very thin materials thanks to its defined spring force. Proper use demands attention to external influences like thermal expansion from body heat and regular calibration with reference gauges at room temperature to maintain accuracy. Employing these tools correctly enables rapid detection of deviations and supports corrective action directly at the workstation.
25mm Thickness Gauge Digital With 0.11284mm Plate, 10±0.1N Measuring Force, ISO 5084-A2, 30s Timer - Microtech Metrology
Take advantage of precise thickness measurement, a controlled measuring force and ISO‑aligned traceability for reliable quality checks on soft materials; order or request advice via Metav Werkzeuge for European delivery and technical guidance. Thickness Gauge — Digital instrument with Ø112.84 mm measuring plate (Microtech Metrology) A thickness gauge for accurate determination of soft materials, offering a digital readout and standard‑compliant measurement suitable for textile testing and laboratory sampling. Digital display resolution 0.0001 mm ISO 5084‑A2 compliant testing standard Controlled measuring force 10 ±0.1 N Measuring plate Ø112.84 mm 30 s hold/timer for stable readings Precision tailored to soft materials The instrument delivers repeatable thickness readings for compressible substrates by combining a high‑resolution display with a defined contact force. With a declared accuracy range of 0.01–0.025 mm, the device supports routine quality control and material characterisation where small variations matter. The fine display increment of 0.0001 mm helps to detect minute trends during serial measurements, turning raw values into actionable quality data for production decisions. Stable contact and consistent repeatability A calibrated measuring force of 10 ±0.1 N reduces operator influence and improves comparability between readings. The circular measuring plate, Ø112.84 mm, spreads contact over a broad area to average local compression effects on textiles and soft foams, which benefits reproducibility. The integrated 30‑second hold/timer enables the operator to wait for material relaxation before locking the value, simplifying batch testing and reducing rework caused by inconsistent manual timing. Built for testing, compliant with standards The device is designed around the ISO 5084‑A2 test principle for thickness measurement of textiles and similar soft materials, ensuring that results are comparable across laboratories and suppliers. With a measuring range of 0–25 mm, the instrument covers common specimen thicknesses in textile, non‑wovens and padding sectors. The digital readout and norm conformity support traceable documentation of inspection results as part of quality management routines. Practical use in the workshop and the lab Compact and straightforward to operate, the digital instrument suits production lines, incoming inspection and R&D benches where repeatable, standardised thickness values are required. The combination of high resolution, controlled force and timer support efficient measurement cycles and faster decision making at the control stage. For procurement, choosing a measurement device with explicit standard conformity reduces validation time and eases integration into existing inspection protocols. For precise textile thickness control and reliable ISO‑aligned measurement, contact Metav Werkzeuge to source the Microtech Metrology thickness gauge and receive expert guidance from our European quality team. Technical Data Article number: 137331272 GTIN: 4061905451751 Manufacturer: Microtech Metrology Category: Measuring instruments — Dial gauges / Thickness gauges Facts Measuring range: 0–25 mm Display resolution: 0.0001 mm Accuracy: 0.01–0.025 mm Measuring force: 10 ±0.1 N Measuring plate diameter: Ø112.84 mm Standard: ISO 5084‑A2 Digital: yes Special features 30 s hold / timer function Suitable for textiles and soft materials Compact laboratory instrument Designed for repeatable, standardised tests FAQ How wide a thickness range does the instrument cover? The Microtech Metrology thickness gauge covers a measuring range of 0–25 mm, suitable for textiles, foams and similar soft materials. Is the measuring force defined and reproducible? Yes. The instrument applies a controlled measuring force of 10 ±0.1 N to ensure reproducible contact pressure and consistent readings. Which standard does this device follow for textile thickness? Measurements conform to ISO 5084‑A2, so results from the device align with the standard procedure for thickness testing of textiles and related materials. What resolution and accuracy can be expected during tests? The digital display shows increments of 0.0001 mm and the specified accuracy range is 0.01–0.025 mm, supporting fine distinction between specimens. Is the instrument suitable for laboratory and production environments? Yes. The combination of digital readout, defined force and timer makes it appropriate for both laboratory sampling and routine production checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital With 0.1µm Readout, 10s Timer, ISO 9073-2 - Microtech Metrology
Take advantage of a compact, high‑resolution instrument that combines a 0–25 mm measuring range with a 0.025 mm stated accuracy and large Ø56.42 mm measuring faces for reliable readings on soft textiles; order directly via Metav Werkzeuge or consult our specialists for application advice. Microtech digital thickness gauge – 0–25 mm range, ISO 9073‑2 compliant The Microtech Metrology thickness gauge is a digital instrument for precise thickness measurement of soft materials and nonwovens, supplied with a stable stand for repeatable laboratory or workshop use. Digital display with 0.0001 mm resolution Measurement range 0–25 mm Compliant with ISO 9073‑2 Ø56.42 mm measuring faces Consistent textile quality control with measurable benefits The compact gauge addresses textile and nonwoven inspection by offering a 0–25 mm range that sits in the micro class for fine mechanical tasks, where reach and rigidity are balanced. The large measuring faces (Ø56.42 mm) distribute contact pressure and reduce imprinting on soft samples, which improves repeatability and lowers scrap rates. Compliance with ISO 9073‑2 ensures results are meaningful in comparative quality checks and acceptance testing. High‑resolution readout reduces uncertainty and speeds decisions A fine display resolution of 0.0001 mm combined with a stated accuracy of 0.025 mm gives a clear numerical basis for pass/fail decisions in incoming inspection and production control. The digital readout removes subjective reading errors common to analogue instruments and accelerates data capture; this rational performance advantage shortens inspection cycles and supports efficient batch decisions without sacrificing traceability. Controlled contact force for delicate materials The instrument offers selectable measuring forces (0.25 / 1.25 N), enabling measurement of thin, compressible textiles without distortion, or firmer contact for denser samples. This measured approach to contact force limits operator‑induced variance and improves comparative testing between operators and shifts, which is particularly valuable in laboratories and small production lines. Practical features that support everyday use A built‑in 10 s timer simplifies timed measurement protocols and helps standardise operator behaviour during test routines. The digital instrument is mounted on a stable stand for hands‑free operation and reproducible positioning, which supports rapid sampling and reduces ergonomic strain during repetitive checks. The unit’s specification and mechanical design make it a pragmatic choice for textile labs and quality departments that require straightforward, dependable instrumentation. For tailored guidance on integrating this Microtech Metrology thickness gauge into textile inspection workflows, contact Metav Werkzeuge for local advice and fast dispatch from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 137331273 GTIN: 4061905451522 Eclass: 21170535 Manufacturer: Microtech Metrology Standard: ISO 9073‑2 Core measurements Measurement range: 0–25 mm Resolution (display): 0.0001 mm Accuracy: 0.025 mm Measuring faces diameter: Ø56.42 mm Measuring force: 0.25 / 1.25 N Digital: yes Special features Timer: 10 s Supplied with stand for reproducible positioning Intended for textiles and nonwoven fabrics Classified as micro range instrument (10–100 mm class) FAQ How suitable is this gauge for textile thickness testing? The Microtech Metrology thickness gauge is designed for textiles and normal nonwoven fabrics; its Ø56.42 mm measuring faces and selectable measuring forces make it well suited to soft materials. What measurement range and resolution are provided? This instrument covers 0–25 mm with a display resolution of 0.0001 mm, and a stated accuracy of 0.025 mm, providing fine detail for quality control tasks. Is the device compliant with industry standards? Yes, the thickness gauge conforms to ISO 9073‑2, making it appropriate for standardised textile thickness assessments. Can the measuring force be adjusted for delicate samples? The gauge offers two measuring forces (0.25 N and 1.25 N) so operators can reduce compression on delicate materials or increase force for firmer samples. What accessories or mounting does the instrument include? The unit is supplied with a stable stand to ensure reproducible positioning during tests and repeatable results. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital With 0.1µm Resolution, 20±0.5N Force, ISO 3034, For Soft Materials - Microtech Metrology
Take advantage of the combination of precise 0–25 mm measurement range, ±0.02 mm accuracy and robust 35.7 mm measuring face for reliable thickness inspection of soft and corrugated materials; order via Metav Werkzeuge or contact our consultants for bespoke integration advice. Dicken‑Messgerät – Digital Thickness Gauge by Microtech Metrology (0–25 mm, ISO 3034) The Dicken‑Messgerät is a compact digital thickness gauge designed for fast, repeatable measurement of soft materials and corrugated fibreboards in production and quality inspection. Digital readout with very fine resolution Measurement range 0–25 mm Ø35.7 mm hardened measuring face Precise measurement where repeatability matters This digital gauging instrument delivers consistent results through a combination of a 0–25 mm measuring range and an accuracy of ±0.02 mm. The device separates display resolution (0.0001 mm readout) from practical accuracy to clarify that fine readout does not replace stated tolerance; this means operators benefit from a crisp numeric display while process capability is governed by the instrument’s accuracy. Compliance with ISO 3034 underlines suitability for standardised inspection procedures, and the substantial measuring face ensures contact stability when assessing sheets and corrugated substrates. Gentle but controlled contact for soft materials A measurement force of 20 ±0.5 N provides a predictable contact pressure that prevents deformation of delicate specimens during gauging. For materials such as corrugated fibreboard and other soft substrates, even contact force is essential to avoid erroneous low readings caused by compression. The larger Ø35.7 mm measuring face spreads the load and improves repeatability across textured surfaces, making this unit practical for incoming goods inspection and inline quality checks where sample handling must be kept simple and reproducible. Workflow benefits and operator ergonomics Designed as a tabletop instrument with an easy‑to‑read digital display, the gauge speeds up routine inspections without sacrificing control. The clear numeric readout and straightforward functions reduce operator training time and minimise interpretation errors in busy inspection stations. The absence of a timer function keeps the user interface uncluttered, focusing attention on measurement quality rather than non‑essential features. Integrated into production, the instrument supports faster decision cycles and fewer product holds, contributing directly to improved throughput. Built for production realities, supported by Metav’s quality filter The instrument’s configuration focuses on practical industrial use: robust measuring face, defined measuring force and clear conformity to ISO 3034. These characteristics make it suitable for quality control environments that require traceable, repeatable thickness data for soft materials. Metav’s presence in Emmerich adds a layer of supply reliability and procurement certainty, turning a technically solid instrument into a dependable part of the inspection chain. Contact Metav Werkzeuge to discuss how the Microtech digital thickness gauge with ISO 3034 conformity and a controlled 20 ±0.5 N measuring force can be integrated into your inspection workflow Technical data Article number: 137331268 GTIN: 4061905451713 Category: Measuring instruments – dial gauges Manufacturer: Microtech Metrology Numbers / Core technical data Measurement range: 0–25 mm Accuracy: ±0.02 mm Readout resolution: 0.0001 mm Measuring face diameter: Ø35.7 mm Measuring force: 20 ±0.5 N Standard: ISO 3034 Special features Digital instrument Suitable for corrugated fibreboards No timer function ECLASS: 21170535 FAQ What measurement range does the gauge cover? The thickness gauge covers a 0–25 mm measurement range suitable for sheet materials and corrugated fibreboards. What accuracy and resolution can be expected? The device provides an accuracy of ±0.02 mm with a display resolution of 0.0001 mm, distinguishing practical measurement tolerance from numeric readout detail. Is the instrument suitable for soft or corrugated materials? Yes, the device is explicitly suitable for corrugated fibreboards and similar soft substrates thanks to its Ø35.7 mm measuring face and controlled measuring force. Does the gauge comply with any standards? The instrument is specified with conformity to ISO 3034, aligning it to common inspection routines. What is the article number for ordering or reference? Refer to article number 137331268 (GTIN 4061905451713) when querying stock or ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital With 0.633N Force, 0.0001mm Readout, ASTM D5199-01-B, Timer 5sec. - Microtech Metrology
Take advantage of precise, repeatable thickness measurement and a compact bench-mounted design for consistent quality checks of soft materials; order directly via Metav Werkzeuge or consult our specialists for application advice. Thickness Gauge – Digital thickness gauge, 0–25 mm range, built-in 5 s timer (Microtech Metrology) A thickness gauge for soft materials, combining a digital display with a stable stand and ASTM-compliant measurement for laboratory and production spot checks Measuring range 0–25 mm Accuracy 0.012 mm Built-in 5 s timer Stable stand for soft materials Consistent precision for soft-material inspection The digital instrument delivers a 0–25 mm measuring range with an accuracy of 0.012 mm, making it suitable for routine quality control where small thickness differences matter. Compliance with ASTM D5199-01-B confirms that the measuring procedure meets an established industrial benchmark for specimen handling and test set-up. The compact bench form factor keeps the sensor axis aligned, so readings remain repeatable even during frequent checks. Bold numeric values provide a clear, comparable specification for procurement and process documentation. Reproducible handling reduces operator influence Designed with a fixed stand and a defined measuring force of 0.633 N, the instrument limits variation caused by manual pressure — a common source of scatter when checking soft materials. The Ø6.35 mm measuring faces concentrate contact on a small, defined area, while the 5 s timer enforces a consistent dwell time before reading, improving repeatability in batch testing. This combination of controlled force, contact geometry and timed measurement helps maintain traceable results across different operators and shifts. Practical integration into inspection workflows The digital readout simplifies data capture during incoming inspection, R&D sample testing or production-spot checks; the format is suited to bench-top use and fast decision cycles. The gauge supports straightforward verification tasks in material labs and workshops where soft films, sheets and membranes require careful thickness control. Its compact design and numeric clarity help technicians and engineers document compliance without extensive additional fixtures. For specialised measurement requirements, the technical specification supplies clear comparators for selecting complementary instruments. Contact Metav Werkzeuge for personalised specification support on Microtech Metrology digital thickness gauges and to discuss suitability for specific soft-material applications — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical clarification and ordering assistance Technical data Article number: 137331258 GTIN: 4061905451621 Manufacturer: Microtech Metrology Category: Thickness gauge / Digital Numbers / Core technical data Measuring range: 0–25 mm Accuracy: 0.012 mm Measuring force: 0.633 ±0.006 N Measuring faces: Ø6.35 mm Readout resolution: 0.0001 Designs / Special features Digital display Built-in 5 s timer Bench-mounted stand Suitable for soft materials Norm: ASTM D5199-01-B FAQ What is the intended application for this gauge? The Microtech digital thickness gauge (SKU 137331258) is intended for measuring the thickness of soft materials such as films, membranes and thin sheets where controlled contact and timed readings are required. How does the 5 s timer improve measurement quality? A fixed 5 s dwell time ensures the specimen and measuring faces settle before recording the value, reducing variability caused by transient deformation and operator habit when using the gauge. Is the measuring force critical for soft samples? Yes; the defined measuring force of 0.633 N minimises compression artefacts in soft materials and supports reproducible thickness readings with the gauge. Does the instrument meet recognised standards? The device is specified to follow ASTM D5199-01-B measurement practice, so test setups and results align with that standard for thickness testing of similar materials. What are the key dimensions of the contact faces? The gauge uses Ø6.35 mm measuring faces to provide a precise and localised contact area appropriate for films and membranes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital With 5s Timer, Ø56.4mm Anvils, 5±0.05N Force, ISO 9863-1-ABC - Microtech Metrology
Compact design with precise 0–25 mm range and stable 5±0.05 N measuring force ensures reliable thickness readings for soft geosynthetic covers; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Thickness Gauge — Digital, 0–25 mm range A Microtech Thickness Gauge for rapid, repeatable measurement of soft polymeric and bituminous geosynthetic coverings in workshop and site testing. Digital instrument with 0–25 mm range Accuracy 0.01–0.015 mm for consistent results Ø56.4 mm measuring faces optimised for soft materials Integrated 5 s timer for stable measurements Precision tailored to delicate materials The compact instrument is engineered for accurate thickness control within a 0–25 mm measurement span, placing it in the micro class suitable for fine, short‑reach tasks. The combination of Ø56.4 mm measuring faces and a measured 5±0.05 N application force reduces local deformation on soft substrates, so readings on polymeric and bituminous geosynthetic coverings are representative rather than skewed by probe pressure. The specified accuracy 0.01–0.015 mm supports quality control routines where small deviations matter, and the digital readout delivers clear numeric data for immediate decision making. Repeatability and standards for trustworthy results Built to the ISO 9863-1-ABC reference, the device helps maintain measurement traceability across production batches. The unit includes an automatic hold via a 5 s timer that stabilises the display before capture, reducing operator variability and improving reproducibility in routine checks. Numeric resolution and the stated accuracy make the instrument well suited for workshop quality assurance and process control, minimising rework by revealing systematic thickness deviations early in the workflow. Practical benefits for workshop efficiency Compact form factor and a clear digital display speed up inspection cycles and support frequent spot checks without lengthy setup. The gauge’s hardware and contact geometry are matched to soft coverings, enabling faster throughput while protecting samples from damage. As a measuring instrument it integrates easily into inspection routines, supports documented sampling and helps technicians maintain compliance with material specifications through concise, reliable measurements. Consult Metav Werkzeuge for application guidance or to request the calibrated Microtech thickness gauge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 137331276 GTIN: 4061905451553 Manufacturer: Microtech Metrology Digital instrument: yes Standard: ISO 9863-1-ABC Facts Measurement range: 0–25 mm Measuring faces: Ø56.4 mm Measuring force: 5±0.05 N Reading: 0.0001 Accuracy: 0.01–0.015 mm Special features Timer 5 s Suitable for polymeric and bituminous geosynthetic coverings Category: Dial gauges Designed for soft material measurement FAQ How accurate is the thickness measurement? The device delivers an accuracy of 0.01–0.015 mm with a reading resolution of 0.0001 and is intended for precise thickness control across the 0–25 mm range. Is this instrument suitable for soft geosynthetic coverings? Yes, the Microtech Thickness Gauge features Ø56.4 mm measuring faces and a controlled 5±0.05 N contact force that minimise material deformation on polymeric and bituminous coverings. Does the device meet recognised standards? The gauge is specified to ISO 9863-1-ABC, supporting standardised procedures and traceable measurement practice. Does the instrument offer features to improve repeatability? An integrated 5 s timer stabilises the reading before capture, reducing operator influence and improving repeatability for routine inspections (SKU 137331276). Can this gauge be used for workshop quality control? The compact digital design and clear numeric output make it suitable for spot checks and serial inspections, helping to detect thickness deviations early and maintain production quality. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital With 5sec Timer, Ø56.4mm Measuring Face, 5±0.05N, ASTM D5199-01-A - Microtech Metrology
Combine precise thickness control, a compact digital readout and a controlled 5 N measuring force for reproducible results on soft materials; order the thickness gauge directly via Metav Werkzeuge or consult our specialists if required. Thickness Gauge, digital (0–25 mm) — Microtech Metrology A Thickness Gauge designed for rapid, standardised measurement of soft materials such as geotextiles, nets and drainage composite fabrics in quality control and incoming inspection. Digital display for fast readings Measuring range 0–25 mm Ø56.4 mm measuring surface Constant measuring force 5±0.05 N Compliant with ASTM D5199-01-A Fast, standardised measurements for production control The instrument delivers a 0–25 mm measuring range with an accuracy of 0.012 mm, providing a reliable basis for acceptance testing and batch control. The digital readout accelerates measurement routines and reduces transcription errors, while the controlled measuring force (5±0.05 N) ensures consistent contact pressure across repeated checks. Compliance with ASTM D5199-01-A underlines the device’s suitability for standardised thickness determination, helping to prevent costly rework by detecting deviations early in the workflow. Repeatable results through larger contact area and timing A Ø56.4 mm measuring surface spreads contact over a sufficient area to represent bulk material thickness for fabrics and composite mats, lowering sensitivity to local surface irregularities. The built-in timer (5 s) automates dwell time for each measurement, improving reproducibility between operators and shifts. For materials such as geotextiles and drainage layers, the combination of surface diameter and timed measurement reduces scatter and supports meaningful statistical control in production environments. Practical handling that speeds up quality checks The compact bench design and clear numeric display enable fast throughput during quality inspections. The device’s simple controls and immediate readout shorten cycle times and support lean inspection processes, making it suitable for both laboratory benches and workshop measuring stations. Robust measuring surfaces and a defined contact force reduce operator influence on results, increasing confidence in batch acceptance and supplier comparisons while keeping documentation effort to a minimum. For expert advice on integrating the Microtech Metrology thickness gauge into inspection routines or to arrange delivery via Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 137331257 GTIN: 4061905451614 Manufacturer: Microtech Metrology Norm: ASTM D5199-01-A Facts Measuring range: 0–25 mm Maximum range: 25 mm Accuracy: 0.012 mm Reading increment: 0.0001 Measuring surface diameter: Ø56.4 mm Measuring force: 5±0.05 N Special features Digital instrument Timer 5 s Suitable for geotextiles, nets and mixed drainage materials Category: Measuring instruments → Gauges FAQ What materials can be measured with this thickness gauge? The thickness gauge from Microtech Metrology is specified for soft materials and is suitable for geotextiles, nets and drainage composite materials, where representative thickness readings over a larger contact area are required. How reproducible are the measurements with this instrument? Reproducibility is supported by the controlled measuring force (5±0.05 N) and the 5 s timer, which together reduce operator variation and improve repeatability for batch testing. Does the device meet any recognised standards? Yes, the instrument is supplied to the standard ASTM D5199-01-A, making it appropriate for standardised thickness testing procedures. What is the declared accuracy and how does it affect inspection limits? The declared accuracy is 0.012 mm, which provides a dependable basis for setting acceptance criteria and reduces the likelihood of unnecessary rejects or undetected non-conformities. Is the instrument appropriate for a high-throughput inspection area? The digital readout, compact bench form and timed measurement function make it well suited to fast inspection loops in production and incoming goods departments. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital Without Timer, 1.66N Measuring Force, ASTM D1777-2 - Microtech Metrology
Take advantage of a compact, digital instrument that delivers reproducible thickness readings for soft and narrow materials; the combination of a 0–25 mm measurement range, ±0.012 mm accuracy and ASTM conformity ensures reliable quality control. Order the gauge directly via Metav Werkzeuge or consult our specialists for application-specific advice. Thickness Gauge 0–25 mm — digital instrument with ±0.012 mm accuracy (Microtech Metrology) The Thickness Gauge 0–25 mm from Microtech Metrology is a digital instrument designed for precise thickness measurement of soft and narrow materials, ideal for textile labs, incoming inspection and production control. Digital readout with ±0.012 mm accuracy Measurement force 1.66±0.05 N for reproducibility Complies with ASTM D1777-2 Suitable for coated fabrics and webbing Consistent, standard-compliant measurement outcomes The digital design and the conformity to ASTM D1777-2 make this instrument suitable where reproducibility and traceable procedures matter. The combination of a fine reading increment (0.0001 mm) and a stated accuracy of ±0.012 mm reduces uncertainty in routine checks, so deviations are detected reliably before downstream processing. This rational performance profile supports faster decision-making in quality control and reduces waste caused by undetected material variance. Purpose-built for soft, narrow and flexible materials Measurement faces with a diameter of Ø9.5 mm and a controlled measurement force of 1.66±0.05 N ensure repeatable contact with delicate surfaces. The construction is optimised for coated fabrics, narrow textiles, webbing and braided ropes, where large, blunt anvils would distort the sample. By limiting deformation during the test, the device provides representative thickness values that reflect actual product behaviour in use. Practical handling that speeds up inspection workflows The instrument’s digital display simplifies reading and logging, reducing interpretation errors that occur with analogue scales. Compact dimensions and a focused measurement range make the tool easy to integrate on a benchtop or in a test station. Clear numerical readouts accelerate batch inspections, while the absence of extraneous functions keeps operation straightforward for technicians who require rapid, repeatable checks without lengthy set-up. Low-maintenance instrument for everyday quality assurance The gauge is engineered for routine use without complex upkeep. The digital electronics and robust measuring faces require only basic cleaning to maintain accuracy; periodic verification against a certified standard is recommended for formal quality systems. Its straightforward feature set supports dependable performance in production environments, making it a practical choice for laboratories and workshops that prioritise stable measurement procedures. Contact Metav Werkzeuge in Emmerich for a quotation, delivery options and practical guidance on integrating Microtech Metrology thickness gauges into the workflow — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 137331252 GTIN: 4061905451560 Brand: Microtech Metrology Standard: ASTM D1777-2 Digital: yes Facts Measurement range: 0–25 mm Accuracy: ±0.012 mm Measurement force: 1.66±0.05 N Reading increment: 0.0001 mm Measuring face diameter: Ø9.5 mm Special features Suitable for coated fabrics Suitable for narrow textiles, webbing and braided ropes No timer Digital readout Category: Thickness gauge FAQ What measurement range does the gauge cover? The Microtech Metrology thickness gauge covers a 0–25 mm range, suitable for thin to medium soft-material samples. Which materials can be measured reliably? The instrument is specified for coated fabrics, narrow textiles, webbing and braided ropes, where controlled contact pressure and small measuring faces are required. What accuracy and repeatability can be expected? Typical performance is ±0.012 mm accuracy with a fine reading increment of 0.0001 mm, which supports consistent in‑line or laboratory inspections. Does the gauge comply with recognised test standards? Yes — the device is specified in accordance with ASTM D1777-2, making it suitable for workflows that reference this standard. Is there an integrated timer or data output function? The product specification indicates no timer; data-output capabilities are not specified in the available product data. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital, 0.0001mm Resolution, Ø10mm Measuring Faces, 3.93N, DIN 53370‑F, No Timer - Microtech Metrology
Take advantage of high-resolution digital readout and repeatable measuring force for reliable thickness control of soft materials, combined with a compact 0–25 mm range that keeps inspection fast and precise. Order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Thickness Gauge — digital precision for soft materials, 0–25 mm range The Thickness Gauge is a digital instrument designed for accurate thickness measurement of soft and flexible materials in laboratory and production environments. Digital display; 0.0001 mm reading Measuring range 0–25 mm Ø10 mm measuring faces, 3.93 N measuring force Conforms to DIN 53370-F High-resolution measurement that supports quality decisions The instrument delivers a clear digital display with a reading step of 0.0001 mm, enabling fine differentiation within the stated accuracy band of 0.0002–0.012 mm. This level of resolution turns routine checks into quantifiable quality data, making it easier to detect small deviations during process control or incoming inspections. The compact measuring span of 0–25 mm combines sufficient reach for most thin materials with a form factor that minimises handling time and allows fast throughput on the shop-floor or in the metrology lab. Controlled contact for consistent, repeatable results Designed with Ø10 mm measuring faces and a nominal measuring force of 3.93 N, the device stabilises contact conditions so measurements remain comparable across operators and batches. The specified force reduces the risk of material compression for delicate substrates such as plastic films, while the face geometry distributes pressure to avoid local indentation. Compliance with DIN 53370-F gives a recognised reference for testing flexible materials, which supports traceable results in production control and supplier qualification. Practical operation for fast inspection and documentation A digital readout simplifies logging and reduces transcription errors compared with analogue alternatives; the compact instrument is therefore well suited to repetitive tasks and small-batch quality checks. The absence of timer functions keeps the user interface straightforward, while the device’s construction prioritises repeatability over extraneous features. Supplied by a specialist metrology partner, the gauge integrates into existing test routines and supports reliable decisions for manufacturers and quality engineers who require consistent thickness data from fragile or compliant materials. For precise thickness control of soft materials, choose the Microtech Metrology thickness gauge supplied via Metav Werkzeuge — contact Metav Werkzeuge for product details or application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 137331262 GTIN: 4061905451652 Manufacturer: Microtech Metrology Display: digital Core data Measuring range: 0–25 mm Resolution (reading): 0.0001 mm Stated accuracy range: 0.0002–0.012 mm Measuring force: 3.93 N Measuring faces: Ø10 mm Special features Suitable for plastic films Conforms to DIN 53370-F No timer FAQ What thicknesses can be measured with this instrument? The thickness gauge from Microtech Metrology measures from 0 to 25 mm, making it suitable for thin foils and flexible sheets. What reading resolution and accuracy does the instrument offer? The device provides a 0.0001 mm reading resolution; the stated accuracy range is 0.0002–0.012 mm, depending on measurement conditions. Is the instrument suitable for measuring plastic films? Yes, the gauge is specifically suitable for plastic films and other soft materials thanks to its Ø10 mm measuring faces and controlled measuring force. Does the instrument include a timer or automatic timing function? No, this model is supplied without a timer to keep operation straightforward and focused on repeatable manual measurement. Which standard does the device comply with for thickness testing? Measurements are carried out in accordance with DIN 53370-F, a recognised standard for testing flexible materials. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital, 0.01mm Resolution, 10mm Measuring Faces, ASTM D3767-03-A1, Without Timer - Microtech Metrology
Take advantage of digital precision and a gentle measuring force to inspect soft materials reliably; the combination of ASTM conformity, a compact bench stand and 0.01 mm resolution keeps quality control efficient and reproducible. Order the Thickness Gauge directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Thickness Gauge – Digital 0–25 mm with Stand The Thickness Gauge is a digital bench instrument for accurate thickness measurement of soft materials up to 25 mm, supplied with a stable stand for repeatable positioning. Digital display 0.01 mm resolution Conforms to ASTM D3767 Stable bench stand included Gentle 0.8±0.1 N measuring force Precise control for delicate materials This digital bench instrument delivers 0.01 mm resolution, which is well suited to routine quality checks of rubber, elastomers and other soft substrates. The comparatively low measuring force (0.8±0.1 N) prevents indentation and sample damage, so results reflect true part thickness rather than deformation. Conformity with ASTM D3767-03-A1 provides a recognised test framework, helping to standardise measurements across production and inspection steps. The instrument’s Ø10 mm measuring anvils concentrate contact area where repeatable surface engagement is required. Stability and workflow efficiency in the workshop Fitted to a compact bench stand, the unit improves ergonomics and repeatability by keeping the probe axis vertical and the specimen held flat during measurement. The digital readout reduces transcription errors and accelerates the inspection routine compared with purely mechanical instruments, supporting a faster throughput without sacrificing traceable results. With a measuring range of 0–25 mm, this format sits in the compact measurement class used for fine mechanical and laboratory tasks, combining reach with rigidity for everyday shop‑floor use. Easy interpretation and integration into inspection routines Clear numerical output and a straightforward setup make this instrument a practical choice for in‑line checks and laboratory sampling alike. The displayed 0.01 mm steps allow quick pass/fail decisions when tolerances are tight, while the compact footprint keeps the instrument accessible on crowded benches. Where documentation is required, the unit’s standardised measurement method under ASTM D3767-03-A1 simplifies the preparation of inspection records and helps align results with supplier or customer agreements. Built for consistent production quality The device is designed for repetitive use in production and R&D environments where soft materials are common. The controlled probe geometry and gentle measuring force considerably reduce operator‑induced variation, improving reproducibility across shifts and operators. Combined with Metav’s supply and quality filter in Emmerich, the instrument supports confident sourcing: precision measuring tools made accessible for workshops and laboratories seeking dependable, standards‑based inspection equipment. Contact Metav Werkzeuge today to discuss the Microtech Metrology Thickness Gauge and secure a standards‑compliant measuring solution optimised for soft materials and repeatable results. Technical data Article number: 137331255 GTIN: 4061905451591 Manufacturer: Microtech Metrology Facts Measuring range: 0–25 mm Resolution / accuracy: 0.01 mm Measuring force: 0.8±0.1 N Measuring anvils: Ø10 mm Display: Digital Special features Conforms to ASTM D3767-03-A1 Intended for soft materials (e.g. rubber) Supplied with bench stand No timer included Digital instrument FAQ What materials can be measured with this instrument? The Thickness Gauge (Microtech Metrology, SKU 137331255) is designed for soft materials such as rubber and elastomers and provides repeatable readings without indenting the specimen. How accurate and fine are the measurements? The device features a digital readout with 0.01 mm resolution and an accuracy suitable for standard quality control tasks under ASTM D3767-03-A1. Does the unit include a stand and how does that help? The supplied bench stand keeps the probe aligned and the specimen stable, improving repeatability and simplifying routine inspection on the workshop bench. Is the instrument suitable for laboratory and production use? Yes; the combination of a compact measuring range, controlled probe force and ASTM conformity makes it suitable for both lab sampling and production line checks. Which standard does the instrument follow? Measurements are performed in accordance with ASTM D3767-03-A1, ensuring a recognised test method for thickness assessment. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital, 0.01mm Resolution, Ø10mm Measuring Faces, 1.57±0.785N Force, DIN EN 1849-2 - Microtech Metrology
Benefit from a compact, workshop-ready thickness gauge that combines 0.01 mm accuracy with a 0–25 mm measuring range for reliable thickness checks on soft materials; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Thickness Gauge — Digital 0–25 mm, 0.01 mm accuracy (Microtech Metrology) A thickness gauge for precise bench and production measurements of soft materials, designed for repeatable thickness checks in workshop and quality‑control environments Digital display with 0.01 mm accuracy Measuring range 0–25 mm Ø10 mm measuring faces for soft materials Compliant with DIN EN 1849-2 Precise measurement where small differences matter The instrument delivers 0.01 mm accuracy across a compact 0–25 mm range, supported by a high-contrast digital display. The specification also lists a fine display increment of 0.0001 mm, which improves readability for fine adjustments while the declared accuracy governs the true measurement uncertainty. This distinction helps production engineers and lab technicians understand that the readout can resolve small steps, while the measurement tolerance determines compliance with inspection limits. The result is a dependable tool for routine thickness control and acceptance testing. Gentle contact for soft materials and consistent readings Equipped with Ø10 mm measuring faces and a standardised measuring force 1.57±0.785 N, the instrument minimises surface deformation when testing compressible substrates. The moderate contact force reduces indentation and yields more reproducible results on foils, soft plastics and laminated sheets. Conformity with DIN EN 1849-2 ensures the instrument’s performance is aligned with recognised measurement practices, supporting documentation and traceable processes in manufacturing and incoming inspection. Compact workflow benefits and practical application The digital format and compact design make this instrument suitable for bench inspection, small-series production and quality-control stations where space is limited but repeatability is required. Absence of auxiliary functions such as a timer keeps operation straightforward and reduces training overhead. For customers seeking integration into their routine, the compact readout and controlled contact characteristics simplify sampling plans and help maintain throughput without sacrificing measurement confidence. For technical clarification on fit or process integration, Metav Werkzeuge’s consultants are available to advise. Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology thickness gauge into existing inspection processes or to request further technical documentation from our Emmerich‑based team. Technical Data Article number: 137331260 GTIN: 4061905451638 Brand: Microtech Metrology eCl@ss: 21170535 Core technical data Measuring range: 0–25 mm Accuracy: 0.01 mm Display resolution: 0.0001 mm Measuring faces: Ø10 mm Measuring force: 1.57±0.785 N Digital instrument: yes Special features Compliant with DIN EN 1849-2 Intended for soft materials and thickness checks Simple operation without timer FAQ What is the declared accuracy of the instrument? The instrument from Microtech Metrology is specified with an accuracy of 0.01 mm for routine thickness checks (SKU 137331260). Can this gauge be used on soft plastics and foils? Yes. The gauge’s Ø10 mm measuring faces and a controlled measuring force of 1.57±0.785 N make the Microtech Metrology thickness gauge suitable for soft materials, reducing risk of indentation during measurement. Does the display resolution mean measurements are that precise? The digital readout shows increments of 0.0001 mm, which improves visibility of small changes; however, the operative accuracy for conformity and tolerance checks is 0.01 mm for the Microtech Metrology gauge. Is the gauge compliant with any standard? The product states compliance with DIN EN 1849-2, which aligns the device with recognised measurement practice for thickness gauges. Is calibration included with the device? Calibration is not specified in the provided product data. For calibration options or certificates relating to the Microtech Metrology thickness gauge (SKU 137331260) please contact Metav Werkzeuge. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge Digital, Ø57.15mm Anvil, 48.48N Measuring Force, ASTM D1777-4, Without Timer - Microtech Metrology
Take advantage of the combination of digital readout with fine resolution, repeatable measuring force and ASTM D1777-4 compliance for dependable thickness control of soft materials. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Thickness Gauge — digital thickness gauge, 0–25 mm, Microtech Metrology The Thickness Gauge is a compact, bench-mounted digital instrument for rapid, repeatable thickness measurement of soft and non-rigid materials up to 25 mm, suitable for incoming inspection and production spot checks. Digital display, 0.0001 mm resolution Measurement accuracy ±0.02 mm Ø57.15 mm measuring face for broad contact ASTM D1777-4 compliant Stable, repeatable thickness readings for quality control The instrument delivers consistent, traceable measurements, combining a digital display with a finely controlled contact force to reduce operator-induced variance. The specified measuring force of 48.48±1.8 N ensures the same pressure is applied on every test, which is especially valuable for soft substrates where contact pressure affects the result. With an accuracy of ±0.02 mm and a resolution reported at 0.0001 mm, this gauge bridges workshop requirements and laboratory expectations by making high-quality data available at production pace. Broad contact area minimises local deformation A large measuring face of Ø57.15 mm distributes pressure across a wider surface area, reducing the risk of local indentation on compressible samples such as fibre mats or foam. This design choice improves representativeness of the measurement and simplifies fixturing for irregular samples. Compliance with ASTM D1777-4 provides a recognised procedural basis for results, supporting internal quality procedures and acceptance criteria in procurement or supplier control. Designed for efficient workshop use and straightforward integration Engineered as a bench-mounted, digital instrument, the gauge balances robustness with ease of use: readings are immediate on the digital display and the compact footprint fits inspection benches and small labs. The digital operation speeds up sampling routines and reduces transcription errors compared with manual gauges, supporting faster decision cycles on the shop floor. The construction and interface target routine process-control tasks rather than research-only applications, making it a practical choice for production environments. Order the Microtech Metrology Thickness Gauge via Metav Werkzeuge for reliable production checks, or contact Metav Werkzeuge for tailored advice and integration support. Technical data Article number: 137331254 GTIN: 4061905451584 Manufacturer: Microtech Metrology Facts Measuring range: 0–25 mm Accuracy: ±0.02 mm Resolution: 0.0001 mm Measuring face diameter: Ø57.15 mm Measuring force: 48.48±1.8 N Standard: ASTM D1777-4 Special features Digital operation Suitable for fibre glass mat Without timer Category: Dial gauges (Messuhren) FAQ What measurement range does the gauge cover? The Microtech Metrology Thickness Gauge covers a measuring range of 0–25 mm and is suitable for routine thickness checks. How precise are the readings from this instrument? Readings are specified with an accuracy of ±0.02 mm and a resolution of 0.0001 mm on the digital display for fine differentiation. Is the gauge suitable for soft and compressible materials? Yes, the gauge is engineered for soft materials; the Ø57.15 mm measuring face and the controlled measuring force make it suitable for materials such as fibre glass mat. Which standard does the instrument conform to? The device is compliant with ASTM D1777-4, providing a standardised basis for thickness measurement procedures. What is the significance of the measuring force specification? The stated measuring force of 48.48±1.8 N ensures repeatable contact pressure, which reduces operator-related variation and yields more reproducible thickness values for soft substrates. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge For Soft Materials With 5s Timer, 0.6N Measuring Force, ISO 9863-1-D - Microtech Metrology
Take advantage of precise, repeatable thickness measurement with a digital instrument that combines high resolution, reliable accuracy and practical timing for consistent readings; order through Metav Werkzeuge or consult our technicians for application advice. Thickness Gauge — Digital thickness gauge, 0–25 mm (Microtech Metrology) A compact digital thickness gauge designed for soft and non-uniform polymeric and bituminous geosynthetic materials, suited for laboratory checks and routine quality control Digital readout with 0.0001 mm resolution Measurement range 0–25 mm Accuracy 0.003–0.01 mm 5 s timer for stable readings Precision that supports traceable quality control The instrument delivers high resolution and a narrow accuracy band (0.003–0.01 mm), providing measurement certainty for fine tolerances. Compliance with ISO 9863-1-D documents the measuring principle and ensures results are interpretable against an established standard. A controlled measuring force (0.6 ±0.1 N) reduces variation caused by inconsistent contact pressure, so readings remain repeatable even in routine production checks. These technical attributes make the device a reliable tool for process-oriented inspection and incoming material control. Tailored for soft, non-uniform materials Designed specifically for polymeric and bituminous geosynthetic materials without uniform thickness, the gauge addresses the common problem of local thickness variation. The small R1 mm measuring faces concentrate contact on a defined area, giving meaningful local values while the instrument’s dynamic behaviour compensates for softer surfaces. With a 0–25 mm measurement range in a compact form factor, the unit fits micro-range inspection tasks where both sensitivity and limited travel are required, supporting meaningful decisions in product qualification and material acceptance. Practical handling that speeds measurement routines A clear digital display with fine resolution accelerates data capture and reduces transcription errors compared with analogue alternatives. The integrated 5 s timer helps to stabilise the reading on soft samples, avoiding fluctuations caused by transient material rebound; this converts a potentially subjective single snapshot into a reproducible result. The combination of quick visual feedback and timing control improves throughput during repetitive checks and supports objective documentation in standard operating procedures. Compact design for bench and workshop use The device’s compact size and focused measuring range position it in the micro class of inspection tools, ideal where space is limited but precision is essential. Its construction and feature set facilitate fast integration into existing quality routines: short set-up times, clear results, and repeatable behaviour deliver operational benefits across laboratory and workshop environments. Supplied by an experienced metrology partner, the instrument fits teams that require dependable thickness readings without complex system changes. Speak to Metav Werkzeuge about the Microtech Metrology thickness gauge for reliable 0–25 mm measurements — expert advice and rapid dispatch from Emmerich are available Technical data SKU: 137331275 GTIN: 4061905451546 Manufacturer: Microtech Metrology Digital: true Norm: ISO 9863-1-D Special feature: Timer 5sec. Facts Measurement range: 0–25 mm Resolution (reading): 0.0001 mm Accuracy variation: 0.003–0.01 mm Measuring force: 0.6 ±0.1 N Measuring faces: R1 mm Special features Suitable for polymeric and bituminous geosynthetic materials without uniform thickness Category: Dial gauges / thickness measuring device Story trigger: messuhr Brand: Microtech Metrology FAQ What materials can be measured reliably with this gauge? The thickness gauge from Microtech Metrology is intended for polymeric and bituminous geosynthetic materials and provides reliable local thickness values even when the material lacks uniformity. How precise are the readings and what resolution is available? Readings are provided with a resolution of 0.0001 mm and an accuracy range of 0.003–0.01 mm, making the instrument suitable for fine tolerance checks in quality control. Does the device follow any recognised standard? Yes, the instrument operates in accordance with ISO 9863-1-D, which defines the relevant measurement principles for this class of thickness measurement. How does the timer function improve measurement quality? The integrated 5 s timer stabilises readings on soft materials by allowing transient surface effects to settle, resulting in more reproducible values when using the Microtech Metrology thickness gauge. What does the measuring force specification mean for daily use? A controlled measuring force of 0.6 ±0.1 N reduces variability from operator pressure, so measurements are more consistent across different users and shifts. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge With 30sec Timer Digital 0.01mm Resolution EN 964-1 - Microtech Metrology
Benefit from precise measurement control, stable repeatability and a practical 30‑second hold function — ideal for routine checks on soft materials. The combination of a fine accuracy band (0.01–0.015 mm), defined measuring force of 5±0.04 N and a clear digital display supports consistent QC results. Order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Microtech Thickness Gauge — Digital 0–25 mm, 30 s timer The Thickness Gauge is a digital instrument for rapid thickness checks on soft materials up to 25 mm, designed for quality control tasks such as geotextile inspection and material sampling. Digital readout with 0.0001 mm resolution High accuracy 0.01–0.015 mm Measuring force 5±0.04 N for repeatability 30 s timer for consistent hold time Precise measurement tailored to soft materials The instrument delivers repeatable readings through a controlled measuring force of 5±0.04 N: this reduces operator‑introduced variation when testing compressible substrates. With an accuracy range of 0.01–0.015 mm and measuring faces of Ø56.42 mm, the design balances contact area and local deformation, which is important when assessing textiles, foams or other soft laminates. Compliance with EN 964-1 underlines conformity to established gauge standards and helps meet documented inspection requirements. Consistent test routines with a clear digital readout A high‑resolution digital readout (0.0001 mm) together with an integrated 30 s timer supports standardised measurement sequences: the timer enforces a fixed hold time so comparisons between samples become more reliable. The instrument’s 0–25 mm range is optimised for small to medium thicknesses commonly encountered in laboratory and production checks. For users unfamiliar with readout resolution, 0.0001 mm indicates the display steps — smaller steps help detect subtle changes, while the stated accuracy defines the trustworthy tolerance of the result. Compact inspection tool that fits bench workflows Classified in the micro measurement band for short‑range thickness checks, this gauge is suited to benches where space and ergonomics matter. Its contact geometry and finite measuring area minimise sample distortion, so routine checks are faster and require less specimen preparation. The practical layout supports serial testing in production and QC environments, reducing throughput time while maintaining controlled conditions for each measurement. Documentation and integration for quality systems Traceability is supported by clear identifiers and standards referenced on technical documentation, allowing straightforward inclusion in inspection reports. The instrument’s measurable characteristics simplify data capture and cross‑checking against specifications. For procurement and system planning, the GTIN and SKU are available in the technical data below to aid catalogue management and inventory processes. Contact Metav Werkzeuge for tailored advice, request a technical datasheet or discuss how the Microtech digital thickness gauge can be integrated into the existing inspection routine Technical Data Article number: 137331264 GTIN: 4061905451676 Manufacturer: Microtech Metrology Category: Messuhren / thickness gauges Digital: yes Measuring range: 0–25 mm Readout: 0.0001 mm Accuracy: 0.01–0.015 mm Measuring faces: Ø56.42 mm Measuring force: 5±0.04 N Standard: EN 964-1 Facts Measuring range max: 25 mm Measuring range min: 0 mm Resolution: 0.0001 mm Accuracy range: 0.01–0.015 mm Measuring force: 5±0.04 N SKU: 137331264 GTIN: 4061905451676 Special features Timer 30 sec Suitable for geotextiles Digital display for repeatable readings Designed for short‑range thickness inspection FAQ How accurate are the readings from this instrument? The thickness gauge provides an accuracy range of 0.01–0.015 mm; Microtech Metrology specifies this tolerance for routine quality control work under EN 964-1 (SKU 137331264). Which materials can be measured reliably with this instrument? The device is intended for soft materials such as geotextiles, foams and pliable plastics; its measuring faces and measuring force of 5±0.04 N are selected to limit compression effects while ensuring repeatable contact. What is the measuring range and resolution? Measuring range is 0–25 mm with a display resolution of 0.0001 mm, making the gauge suitable for micro‑range thickness inspections common in textiles and small‑format components. Does the instrument support standardised hold times? Yes — the integrated 30 s timer enforces a consistent hold time to reduce operator variability and improve comparability between measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge With 30sec Timer, Ø10mm Measuring Faces, ISO 2286-3 - Microtech Metrology
The compact digital thickness gauge combines a wide 0–25 mm measuring range with reliable 0.01 mm accuracy and an integrated 30 s hold function for repeatable results; order the instrument directly via Metav Werkzeuge or consult our specialists for application support. Thickness gauge — digital precision for soft materials (0–25 mm, 0.01 mm) A digital thickness gauge designed for quick, repeatable thickness checks on soft substrates such as rubber and plastic‑coated fabrics, offering clear readings and standardised measurement according to ISO 2286‑3. Digital display with 0.01 mm resolution Measuring range 0–25 mm Ø10 mm hardened measuring faces Integrated 30 s hold timer Suitable for rubber and coated fabrics Accurate readings that speed up quality checks The instrument delivers a 0.01 mm accuracy across a 0–25 mm span, read on a clear digital display that reduces transcription errors and speeds up inspection routines. The combination of fine resolution and a stable readout reduces rework and supports consistent process control, making the device an efficient choice where throughput and documentation matter. Gentle, adjustable contact for delicate materials Three selectable measuring force settings (0.393 ±0.039 N, 0.785 ±0.079 N, 1.88 ±0.19 N) allow measurements to be adapted to the compressibility of the specimen, preventing artificial thinning of soft laminates. The Ø10 mm measuring faces distribute pressure evenly, so readings on rubber and plastic‑coated fabrics remain reproducible. This measured approach ensures the gauge is suitable for both lab checks and incoming goods inspection. Built for consistent workflow in production and inspection An integrated 30 s hold timer stabilises the display after contact, providing time to record values without rushing the operator and improving data reliability during batch testing. The digital readout and compact form factor permit rapid cycling between samples, supporting lean inspection processes and minimising operator influence on the result. Suitable applications and practical advantages Designed for textile converters, component suppliers and quality teams, the instrument supports thickness checks required by ISO 2286‑3 for coated fabrics and similar standards. Robust electronics and straightforward operation make the tool useful at the inspection bench and on the production floor, while the concise feature set keeps training time short and documentation consistent. For standardised, reproducible thickness measurements choose the Microtech Metrology digital thickness gauge and discuss delivery or technical details with Metav Werkzeuge in Emmerich — our consultants are available to advise on the right specification for each application Technical data Article number: 137331266 GTIN: 4061905451690 Manufacturer: Microtech Metrology Facts Measuring range: 0–25 mm Readout increment: 0.0001 Accuracy: 0.01 mm Measuring faces: Ø10 mm Measuring forces: 0.393 ±0.039 N / 0.785 ±0.079 N / 1.88 ±0.19 N Special features Integrated 30 s hold timer Digital display for direct readings Norm: ISO 2286‑3 Application: rubber, plastic‑coated fabrics FAQ What measuring range does the thickness gauge cover? The thickness gauge covers a measuring range of 0–25 mm (SKU 137331266), suitable for thin to medium‑thickness soft materials. What resolution and accuracy are provided? The instrument offers a display increment of 0.0001 and a declared accuracy of 0.01 mm, ensuring fine discrimination for production and quality checks. Which materials can be measured with this instrument? This digital thickness gauge is intended for rubber and plastic‑coated fabrics, and similar soft substrates that fall under the scope of ISO 2286‑3. How do the different measuring forces influence results? Selectable measuring forces (0.393, 0.785 and 1.88 N) allow adaptation to material compressibility; lower forces reduce compression on soft samples while higher forces suit firmer laminates, improving comparability of readings. Is the device suitable for production and laboratory use? Yes; the combination of a clear digital readout, selectable measuring force and the 30 s hold timer makes the gauge well suited for both routine production checks and controlled laboratory inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thickness Gauge With 50.5mm Anvils, 2±0.02N Measuring Force, Digital 0.0001mm Readout, ISO 5084-0, Timer 30sec. - Microtech Metrology
The combination of reliable repeatability, a compact 0–25 mm measuring range and fine resolution makes this instrument ideal for demanding textile inspection and workshop quality checks. Built for consistent use, it delivers readings with an accuracy of 0.01–0.02 mm and incorporates a stabilising 30 s timer for repeatable results. Order the Digital Thickness Gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital Thickness Gauge for Soft Materials, 0–25 mm (Microtech Metrology) The Digital Thickness Gauge is a bench-mounted instrument for fast, repeatable thickness measurements of soft materials, primarily designed for textile inspection and material QA. Digital display, 0.01–0.02 mm accuracy 0–25 mm measuring range Ø50.5 mm measuring anvil 30 s auto-timer for stabilised readings Precise results that support production decisions The instrument delivers repeatable measurements across its 0–25 mm range with a stated accuracy of 0.01–0.02 mm, making it suitable for standardised quality control. The specified measurement force 2±0.02 N is maintained by the mechanism to reduce operator-induced variation; this controlled force is important because different contact pressures change readings on soft substrates. Compliance with ISO 5084-0 confirms that the device is designed around recognised test procedures for material thickness, providing a reliable basis for documentation and production decisions. Repeatability through stable fixturing and timed readings Large anvils reduce local deformation on soft samples: the Ø50.5 mm measuring anvil distributes contact pressure and improves repeatability when testing textiles and foams. A dedicated 30 s timer holds the measuring head in position long enough for sample relaxation and for the digital electronics to stabilise, which reduces scatter in serial measurements. The digital display provides clear numerical output for rapid logging; the combination of substantial anvil area and timed measurement supports consistent batch inspection routines. Compact design for workshop benches and lab tables With a compact footprint and a bench stand, this gauge suits both production floors and test rooms where space is at a premium. The instrument is optimised for textiles and other soft materials, where a larger anvil and controlled contact force lower measurement uncertainty. Integration into routine inspection is straightforward: readings are immediate and easy to record, and the sturdy construction is intended for daily use in quality assurance workflows. The device supports efficient decision-making by delivering comparable values that can be referenced against process limits. Choose Microtech Metrology's digital thickness gauge for consistent textile inspection — contact Metav Werkzeuge for an expert consultation and to arrange supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 137331271 GTIN: 4061905451744 eClass: 21170535 Manufacturer: Microtech Metrology Facts Measuring range: 0–25 mm Resolution (display): 0.0001 Accuracy: 0.01–0.02 mm Measuring anvil diameter: Ø50.5 mm Measuring force: 2 ±0.02 N Digital instrument Special features 30 s timer for stabilised readings Designed for soft materials and textiles Complies with ISO 5084-0 Bench-mounted with stand FAQ How accurate are the thickness readings? The Digital Thickness Gauge from Microtech Metrology provides readings with an accuracy of 0.01–0.02 mm, suitable for routine quality control and comparative measurements in textile applications. What measuring range does the instrument cover? The device measures from 0 to 25 mm, a range that covers most soft-material samples used in lab and production checks. Why is the measuring force important and what is it for this gauge? Consistent contact pressure prevents variation on compressible samples; this gauge applies a controlled measuring force of 2 ±0.02 N, which reduces operator influence on results. Does the gauge include a timer or other aids for repeatability? Yes, the instrument features a 30 s timer to ensure the measurement is taken once the sample and electronics have stabilised, improving repeatability between measurements. Is the device suited specifically for textiles? Yes—the gauge is designed for textiles and other soft materials, with a Ø50.5 mm anvil that minimises local compression and yields more representative thickness values. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Thickness Caliper With Microcomputer, Colour 1.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of fast data export and assured traceability through an ISO 17025-calibrated workflow combined with a 1.5" colour touchscreen and Wireless + USB connectivity for uninterrupted production measurement. Order the thickness caliper directly via Metav Werkzeuge or ask our consultants if needed. Thickness Caliper by Microtech Metrology — Digital caliper with 1.5" colour touchscreen and Wireless + USB Thickness Caliper is a digitally equipped measuring tool for precise 2D thickness and profile checks across workshop and quality‑control processes, designed for standard workshop ranges up to 300 mm. ISO 17025-calibrated with certificate 1.5" colour touchscreen for clear readouts Wireless and USB data transfer options 0.03 mm accuracy for reliable repeatability Accurate measurement that fits the workshop routine The digital thickness gauge combines mechanical robustness with an integrated microcomputer to deliver repeatable thickness and 2D measurements across its X/Z range of 0–300 / 0–150 mm. The device’s rated accuracy of ±0.03 mm makes it suitable for general machine‑shop QC tasks where dependable tolerances are required. As a Standard class caliper, it balances reach and stiffness — the 300 mm maximum range covers the most common workshop needs while preserving good handling and one‑hand operation. The 1.5" colour touchscreen provides immediate numeric and graphical feedback, reducing interpretation errors and accelerating routine inspection cycles. Modern data flow for faster process control Connectivity is configured for contemporary production environments: Wireless transmission and USB output enable direct logging into SPC systems or temporary data capture without interrupting measurement throughput. The integrated microcomputer supports 2D measurement modes, so dimensional checks and thickness profiles can be recorded and exported with minimal manual transcription. This practical data handling reduces administrative time and supports faster decision‑making on the shopfloor, improving overall process efficiency and traceability. Calibrated readiness and documented traceability Delivered fully ISO 17025 calibrated, the instrument comes with a traceable calibration certificate, meeting the documentation requirements of quality departments and audits. This calibrated status removes the initial calibration step from procurement to operation, enabling immediate use in inspection routines and guaranteeing a known uncertainty that can be entered directly into quality records. The combination of certified calibration and digital data output simplifies compliance and supports reliable measurement history for batch reports. Designed for everyday robustness and usability Built as a digital caliper for routine industrial use, the construction favours durability and repeatable operation. The measurement system is optimised for thickness and profile inspection, and the touchscreen interface reduces menu complexity for repeat tasks. Wireless and USB options offer flexibility: local logging during benchwork, or networked transfer for centralised quality control. Combined, these features cut cycle time and increase measured parts throughput while maintaining consistent results. For procurement or technical advice on Microtech Metrology’s calibrated thickness caliper, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and integration into existing inspection routines Technical data Article number: 149020307 GTIN: 4061905045462 Manufacturer: Microtech Metrology Core specifications Measurement range X: 0–300 mm; Z: 0–150 mm Maximum range: 300 mm Accuracy: ±0.03 mm Display: 1.5" colour touchscreen Data output: Wireless, USB Digital: yes Special features Digital caliper with integrated microcomputer for 2D measurements ISO 17025 calibration with certificate included Wireless and USB connectivity Suitable for standard workshop and machine‑shop QC FAQ What measurement range does the caliper cover? The instrument’s measurement range is specified as X: 0–300 mm and Z: 0–150 mm, providing the standard workshop reach for most component thickness checks. Is the caliper supplied calibrated? Yes — the caliper is delivered fully calibrated according to ISO 17025 and includes a calibration certificate for immediate use in documented quality procedures. How is measurement data exported from the device? Measurement values can be transferred via Wireless connection or USB, enabling integration with statistical process control or simple data logging workflows. What accuracy can be expected in routine use? The device is specified with an accuracy of ±0.03 mm, suitable for general machine‑shop quality control tasks within the standard caliper category. Which applications suit this instrument best? The caliper is optimised for thickness and 2D profile measurements in manufacturing and inspection areas where the 300 mm range and 0.03 mm accuracy meet production tolerances. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30mm Digital Test Indicator With 8mm Shank, Spring-Loaded, 0.01mm Readout, In Case - Metav IndustryLine
Take advantage of precise, repeatable readings and a compact design to speed up inspection routines; the combination of 0.01 mm display resolution, ±0.03 mm accuracy and a spring‑loaded probe ensures consistent results for small‑scale metrology tasks. Order the digital test indicator directly via Metav Werkzeuge or ask the consultants for tailored advice. Digital test indicator 30 mm with 8 mm shank — compact spring‑loaded digital test indicator for workshop and inspection use (Metav IndustryLine) The Digital test indicator 30 mm with 8 mm shank is a compact, spring‑actuated measuring instrument designed for precise comparative and run‑out checks in small assemblies and bench inspection tasks. Digital display with mm/inch conversion 0.01 mm resolution, clear numeric readout 8 mm shank for standard holders Spring‑loaded probe for consistent force Reliable precision for small‑part inspection Equipped with a 0.01 mm display resolution and a stated accuracy of ±0.03 mm, this instrument provides the measurable certainty required for routine quality control in toolrooms and small‑batch production. Classified within the micro measuring range (maximum 10–100 mm), it is optimised for fine mechanical components where short probe travel and rigid geometry reduce measurement uncertainty. The digital display with dedicated ON/OFF, mm/inch and zero functions simplifies value transfer and reduces transcription errors, supporting a faster inspection workflow. Consistent contact and easy handling on the shop floor The spring‑actuated probe (spring‑loaded) and a nominal measuring force of <2.2 N deliver repeatable contact behaviour, which minimises operator‑induced variation during comparative checks. The 8 mm shank fits common holders and stands, enabling stable mounting for run‑out and alignment tests. At approximately 0.23 kg and with a compact body length, the indicator is light enough for handheld adjustments yet substantial enough to remain vibration‑resilient when fitted to a stand. Clear outcomes and practical application guidance Use the device for concentricity checks, small‑part run‑out measurements, datum comparisons and setup verification on fixtures. The numerical readout reduces interpretation time compared with analogue dials and the inch conversion supports cross‑border documentation. The instrument’s repeatability characteristics make it well suited to inspection benches, maintenance workshops and assembly lines where quick, reliable pass/fail decisions are needed without sacrificing traceability. For workshop‑grade inspection and dependable integration into existing test rigs, contact Metav Werkzeuge for purchase and application advice — Metav Werkzeuge in Emmerich can assist with delivery and technical guidance. Technical Data Article number: M240.127 GTIN: 4054469181295 Tariff number: 90173000 Category: Messuhren Facts Measuring range: 0–30 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.03 mm Measuring force: <2.2 N Weight: 0.23 kg Length: 118 mm Special features Digital display with ON/OFF, mm/inch and zero functions Spring‑loaded (spring‑actuated) probe 8 mm shank for standard holders Compact form for micro‑range inspection FAQ What measuring range does the indicator cover? The indicator covers a measuring range of 0–30 mm, placing it in the micro‑range suitable for fine mechanical and small‑part inspection. How precise is the device for routine quality control? The device provides a display resolution of 0.01 mm with an overall accuracy of ±0.03 mm, offering reliable repeatability for bench and workshop checks. Which mounting options are supported? The instrument features an 8 mm shank for use with common indicator holders and stands, enabling stable mounting for run‑out and alignment tasks. Is the probe force controlled to reduce operator influence? Yes; the spring‑loaded probe and a nominal measuring force below 2.2 N help to maintain consistent contact pressure and reduce measurement variation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40-100mm Digital Probe With Self-Opening Measuring Tips, 0.005mm Resolution, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of a compact, high-resolution measuring probe that combines 0.005 mm readout precision with a hardened stainless-steel construction for reliable repeatability in fine internal checks; order the device directly via Metav Werkzeuge or contact our consultants for integration advice. Digital measuring probe M240.078 — 40–100 mm range, 0.005 mm resolution (Metav IndustryLine) The Digital measuring probe M240.078 is a precision probe designed for use with calipers and inspection fixtures, providing accurate internal, step and groove measurements across a compact 40–100 mm span. 0.005 mm readout resolution Hardened stainless-steel construction Self-opening measuring jaws Digital mm/inch and ABS functions Precision where small details determine quality The probe delivers a 40–100 mm measuring span while prioritising fine-detail accuracy through a 0.005 mm digital readout and an industrial error limit of ±0.02 mm. This combination means reliable detection of small deviations without overcomplicating measurement routines. For applications such as slot widths, bore checks and groove depths, the compact geometry and the self-opening jaws reduce operator-induced variation and increase throughput. The limited measuring range classifies the product in the micro category, making it particularly suitable for watchmaking, precision fittings and components where short, stiff jaws are essential. Built to withstand workshop demands and remain consistent Manufactured from hardened stainless steel, the probe resists corrosion and maintains dimensional stability under regular use. The Ø 5 mm mounting shank enables straightforward integration into existing caliper slides or fixture holders, while the half‑kilogram overall mass contributes to a stable feel during manual checks. These material and design choices reduce setup time and support reproducible results, lowering the risk of rework in serial inspection tasks. The rugged construction therefore supports continuous operation in production and inspection environments. Clear digital output and simple process integration Equipped with a digital display featuring ON/OFF, mm/inch conversion and ABS/zero functions, the probe simplifies data capture and reduces conversion errors in mixed-unit workflows. The higher-than-standard resolution streamlines comparison against tolerance bands and shortens decision cycles in quality control—fewer intermediate calculations, faster go/no-go assessments. Compatibility with common caliper mounts and a compact form factor allow quick retrofitting into measuring stations or portable inspection kits, improving measurement ergonomics without significant fixture changes. Contact Metav Werkzeuge in Emmerich for delivery details or integration support on the M240.078 and discover how this compact high-resolution probe can be introduced into existing inspection processes. Technical data SKU: M240.078 GTIN: 4054469151939 ECLASS: 27144044 ETIM: EC000029 Brand: Metav IndustryLine Numbers / Core technical data Measuring range: 40–100 mm Readout / resolution: 0.005 mm (0.0002 in) Accuracy: ±0.02 mm Weight: 0.5 kg Mounting shank: Ø 5 mm Special features Material: hardened stainless steel Self-opening measuring jaws Digital display with ON/OFF, mm/inch and ABS/zero Suitable for internal measurements (slots, grooves, diameters) Suitable for caliper integration FAQ What measuring tasks is this probe best suited for? The M240.078 probe from Metav IndustryLine is optimised for internal, step and groove measurements within the 40–100 mm range where compact, stiff jaws and high readout resolution are required. How accurate is the digital output compared with standard calipers? The device provides a 0.005 mm readout with an industrial accuracy limit of ±0.02 mm, offering finer resolution than many standard digital calipers and aiding tighter quality control. Can the probe be mounted in existing caliper slides or fixtures? Yes. The probe features a Ø 5 mm mounting shank for straightforward integration into compatible caliper slides and inspection fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Thickness Caliper With Colour 1.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from high-resolution readout and factory traceability: the calliper combines a 0.001 mm reading resolution with a stated accuracy of 0.05 mm and wired/wireless data transfer to support efficient quality checks. Order the Thickness calliper directly via Metav Werkzeuge or ask our consultants if needed. Thickness calliper – Microtech Metrology; 500 mm medium-range with touchscreen The Thickness calliper is a digital measuring instrument for thickness and profile checks, designed for medium-range workshop and toolroom applications with clear touchscreen readout and flexible data export. Colour 1.5" touchscreen display Wireless and USB data output ISO 17025 calibration certificate included 500 mm medium-range for workshop use High-resolution readout that boosts throughput and confidence The instrument offers a 0.001 mm reading resolution combined with a specified accuracy of 0.05 mm, which allows for reliable pass/fail decisions during routine inspections. This combination delivers practical precision: the fine display resolution supports exact positioning and repeatable readings, while the declared accuracy defines the measurement uncertainty to be used in reports. For production control, the result is fewer re-measures and faster cycle times—thanks to the precise digital readout and stable mechanical guidance. The calibration status and traceability reduce uncertainty in acceptance criteria and support documented quality routines. Medium-range design for workshop versatility With a maximum measuring length of 500 mm, the device sits in the medium-range class that balances reach and stiffness for general machine‑shop tasks. This dimension is ideal for components such as housings, fixtures and medium-sized assemblies where single-hand operation and rigidity are required. The stroke layout X:0–500 and Z:0–150 mm enables direct thickness checks and limited profile measurements without switching instruments, reducing handling and the risk of measurement error. The instrument’s construction keeps deflection low across the working span, ensuring consistent results across the full measuring range. Modern display and flexible data transfer for smoother workflows The 1.5" touchscreen presents readings and menus clearly, while the combined Wireless and USB data outputs allow direct logging into inspection software or portable data collectors. This removes manual transcription, shortens reporting time and lowers the likelihood of clerical mistakes. The touchscreen simplifies unit selection and zeroing operations, which speeds up repeated measurement tasks on the shop floor. Where traceable records are required, wireless transfer or a USB export streamlines integration with statistical process control and quality documentation systems. Calibrated delivery and supplier reliability for audit-ready use The instrument is supplied fully calibrated to ISO 17025, and a calibration certificate is included with delivery to document traceability and conformity. Such factory calibration supports internal audits and simplifies initial deployment into inspection procedures. The product is manufactured by Microtech Metrology and is distributed through Metav Werkzeuge’s European supply network, which provides consistent availability and a practical quality filter at the Emmerich site. This combination of traceable calibration and dependable distribution minimises downtime and supports continuous quality assurance in production. Contact Metav Werkzeuge for tailored advice and to arrange purchase of the Microtech Metrology Thickness calliper calibrated to ISO 17025 and ready for immediate dispatch from Emmerich Technical data Article number: 149020507 GTIN: 4061905045875 Manufacturer: Microtech Metrology Digital: yes Display: Colour 1.5" touchscreen Data output: Wireless + USB Accuracy: 0.05 mm Reading resolution: 0.001 mm Measuring range: X: 0–500 mm / Z: 0–150 mm Calibration: ISO 17025 certificate included Numbers Accuracy: 0.05 mm Resolution: 0.001 mm Display size: 1.5 inches Measuring range (max): 500 mm Special features Medium-range calliper construction for reduced deflection 2D-capable thickness and profile checks Dual data interface: wireless and USB Supplied calibrated with certificate for traceability Manufacturer: Microtech Metrology FAQ What calibration documentation is supplied with the instrument? The Thickness calliper from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes a calibration certificate documenting traceability. Which measurement range is covered by this calliper? The device covers a measuring range up to 500 mm (X: 0–500 mm; Z: 0–150 mm), making it suitable for medium-range workshop and toolroom tasks. How precise are the readings and what is the stated accuracy? Readings are displayed to 0.001 mm resolution, with a stated accuracy of 0.05 mm; use the accuracy value when assessing measurement uncertainty for quality documentation. How can measurement data be exported from the instrument? Data can be transferred either wirelessly or via USB, enabling direct logging to inspection software or portable data collectors without manual entry. Is this instrument suitable for integration into production quality control? Yes; the combination of precise readout, dual data output and ISO 17025 calibration makes the calliper appropriate for routine production control and traceable documentation (SKU 149020507). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Digital Precision Caliper for Sheet Thickness Measurement, 10mm Round Jaws, Self-Closing, Metal Body, Kit - Metav IndustryLine
Take advantage of a compact measuring tool that combines reliable repeatability, a clear digital readout and robust stainless‑steel construction for consistent sheet‑metal thickness checks; order directly via Metav Werkzeuge or contact our consultants for assistance. M240.076 Digital caliper for sheet‑metal thickness (0–50 mm) — Metav IndustryLine M240.076 is a compact digital caliper optimised for rapid and accurate sheet‑metal thickness measurement in workshop and production environments Digital display with mm/inch and zero function Hardened stainless‑steel construction Self‑closing spring mechanism Supplied in protective case Precise measurement where space and speed matter The compact design of this digital caliper delivers repeatable thickness checks for thin materials thanks to its 0–50 mm measuring range and fine resolution (0.01 mm). With a declared accuracy of ±0.05 mm, the instrument meets common workshop tolerances for quality control and production sampling. The round measuring faces reduce local deformation on thin sheets and, combined with the hardened stainless‑steel build, ensure measurements remain consistent even under frequent use. This results in fewer rechecks and smoother process control in sheet‑metal workflows. Faster checks and one‑hand operation to raise throughput A concise set of functions—on/off, mm/inch and zero—speeds up routine tasks and avoids unnecessary menu navigation. The self‑closing spring enables single‑handed operation for quick, repeatable readings, reducing cycle times on the shop floor. Supplied in a protective case, the caliper arrives ready for immediate use and safe transport between workstations. Classified as a Micro caliper (measuring range up to 100 mm), it is especially suited to precision trades and fine mechanical assemblies where compactness, ergonomics and fast handling are priorities. Built for reliable shop‑floor quality processes Constructed with a metal housing and hardened measuring surfaces, the tool withstands daily industrial use and provides a stable measuring reference. The clear digital readout mitigates reading errors associated with analogue scales, supporting traceable recording of thickness values in inspection routines. The modest weight aids handling without sacrificing stiffness, so measurements stay reproducible across multiple operators. For manufacturers and workshops requiring dependable thickness checks, this caliper integrates easily into standard quality workflows and inspection stations. Contact Metav Werkzeuge for order placement or technical advice on the Metav IndustryLine M240.076 and to confirm suitability for specific sheet‑metal applications via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.076 GTIN: 4054469112770 Manufacturer: Metav IndustryLine Facts Measuring range: 0–50 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Accuracy: ±0.05 mm Weight: 0.4 kg Special features Material: hardened stainless steel, metal housing Display: digital with on/off, mm/inch and zero functions Self‑closing spring mechanism Supplied in protective case Measuring faces: round Suited to sheet‑metal thickness measurement FAQ What measuring range does this caliper cover? The digital caliper covers a measuring range of 0–50 mm and is intended for sheet‑metal thickness checks. How accurate is the instrument for routine inspections? Accuracy is specified as ±0.05 mm, which is suitable for standard workshop quality control and production sampling. Is the caliper supplied ready for use and how is it protected? The caliper is supplied in a protective case for transport and immediate use on the shop floor. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Test Indicator With 8mm Shank, Spring Plunger, 0.01mm Resolution, Supplied In Case - Metav IndustryLine
Take advantage of the combination of precise 0.01 mm resolution, a compact 0–50 mm measurement range and a spring‑loaded probe tip for reliable comparative checks; order the Digital probe 50 mm with 8 mm shank directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Digital probe 50 mm with 8 mm shank – 0.01 mm resolution, digital display Digital probe 50 mm with 8 mm shank provides a compact, shop‑ready solution for comparative measurements and small‑part inspection across machine shops and inspection benches 0.01 mm digital resolution 0–50 mm measurement range Spring‑loaded probe tip Protective transport case included Precise results for routine quality checks The digital display and fine resolution of 0.01 mm make this measuring gauge suitable for routine dimensional checks and comparative inspection where reproducibility matters. With a stated accuracy of ±0.03 mm, the probe delivers repeatable readings that align with standard workshop tolerances; this level of performance supports entry‑level quality control, first article checks and setup verifications without the complexity of laboratory instruments. The numeric display with mm/inch switching and a zero function simplifies data reading and transfer to downstream documentation. Compact design that integrates easily into fixtures A robust 8 mm shank enables secure mounting in common holders and test stands while the spring‑loaded probe tip ensures controlled contact force during measurements. The limited measurement force (<2.5 N) reduces the risk of part deformation when checking delicate components, and the modest mass (0.23 kg) plus overall length (148 mm) keeps the device manoeuvrable for use at the bench or on portable inspection rigs. These features permit straightforward integration into existing measurement jigs and comparator setups, improving workflow efficiency. Practical operation and protected transport Operation is straightforward: the instrument offers an On/Off control, zeroing and quick mm/inch toggling on the display to support mixed workflows. Supplied in a protective case, the unit is configured for secure storage and transport between workshop and inspection areas. The compact format and clear readout reduce operator handling time during repetitive tasks, helping to keep inspection throughput steady while maintaining consistent results. For application advice or to discuss integration of the Metav IndustryLine digital probe into existing inspection processes, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical Data Article number: M240.128 GTIN: 4054469181301 Category: Messuhren Tariff number: 90173000 Facts Measurement range: 0–50 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.03 mm Shank diameter: 8 mm Length: 148 mm Weight: 0.23 kg Measurement force: <2.5 N Special features Digital display with On/Off, mm/inch and zero Spring‑loaded probe tip Protective transport case included Compact format for bench and portable inspection FAQ What resolution and accuracy does the Digital probe 50 mm with 8 mm shank provide? The Digital probe 50 mm with 8 mm shank has a resolution of 0.01 mm and an accuracy of ±0.03 mm, suitable for common workshop inspection tasks. Can the probe be mounted in standard holders or test stands? Yes, the device features an 8 mm shank for secure mounting in standard holders and comparator fixtures. Is the probe suitable for delicate parts? The probe's spring‑loaded tip and measurement force below 2.5 N reduce the chance of deforming sensitive components during contact checks. Does the delivery include a case for transport? A protective transport case is included with the product to facilitate safe storage and movement between workstations. Which display functions are available for quick measurements? The unit offers an On/Off switch, a zeroing function and mm/inch conversion on the digital display for rapid, unambiguous readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Test Indicator With Self‑Closing Measuring Jaws, 0.005mm Resolution, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the 0–50 mm measuring range, the 0.005 mm display resolution and the robust stainless construction to achieve repeatable external measurements on small components; order the probe directly via Metav Werkzeuge or ask our consultants if needed. Digital measuring probe M240.077 — 0–50 mm range, 0.005 mm resolution (Metav IndustryLine) A Digital measuring probe M240.077 designed for precise external measurements on calipers and compact workshop components. 0–50 mm measuring range 0.005 mm display resolution Stainless hardened construction Self-closing measuring jaws Precision built for small-part inspection The module delivers industrial-grade precision across its 0–50 mm range, combining a fine 0.005 mm display step with a rated accuracy of ±0.02 mm. Classified in the micro segment for calipers, this format is tailored to fine mechanical tasks where minimal jaw length and low torsion matter. The compact footprint preserves repeatability when checking thicknesses, grooves or thread profiles, providing a measurable improvement in quality-control throughput for workshops and small-series production. Durable design that simplifies handling Constructed from stainless steel that has been hardened for wear resistance, the probe withstands repeated workshop use while remaining straightforward to handle. The self-closing measuring jaws reduce setup time and improve contact consistency during external measurements, and the standard Ø 5 mm mount makes attachment to caliper fixtures fast and reliable. Supplied in a protective transport case, the unit balances robustness with portability so inspection routines remain efficient without sacrificing component protection. Clear readout and workflow compatibility The integrated digital display provides practical functions — ON/OFF/ORIG, mm/inch switching and ZERO/ABS — that support mixed workflows and quick zeroing on datum faces. With a lightweight construction of about 0.5 kg and a concise set of functions, the probe integrates smoothly into existing caliper-based setups and bench inspection stations. Designed for external measurement tasks such as thickness checks, groove and thread inspection, the ensemble reduces operator-induced variance and helps standardise inspecting procedures across small-part production lines. For precise caliper measurements choose the Metav IndustryLine solution—contact Metav Werkzeuge for technical guidance and reliable supply from Emmerich. Technical data Article number: M240.077 GTIN: 4054469151922 Tariff number: 90173000 Brand: Metav IndustryLine Facts Measuring range: 0–50 mm Resolution: 0.005 mm Accuracy: ±0.02 mm Weight: 0.5 kg Mount diameter: Ø 5 mm Special features Material: stainless steel, hardened Digital display functions: ON/OFF/ORIG, mm/inch, ZERO/ABS Intended use: external measurements (thickness, grooves, threads) Self-closing measuring jaws Supplied in a protective transport case FAQ What measuring range does the probe cover? The probe covers a measuring range of 0–50 mm; the Digital measuring probe M240.077 from Metav IndustryLine (SKU M240.077) is intended for fine external inspections within that span. What resolution and accuracy can be expected? The device shows readings in 0.005 mm steps with a stated accuracy of approximately ±0.02 mm, suitable for workshop quality control and small-part inspection. Can the probe be mounted on standard calipers? Yes, the probe uses a Ø 5 mm mount and is compatible with common caliper fixtures for external measurements such as thicknesses, grooves and threads. What material is the probe made from and how durable is it? The instrument is manufactured from hardened stainless steel, designed for repeated use; it is supplied in a protective transport case to reduce the risk of damage during storage and transit. Which display functions are available? The digital readout includes ON/OFF/ORIG control, mm/inch switching and ZERO/ABS functionality for quick datum setting and flexible measurement workflows with the Digital measuring probe M240.077. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Thickness Caliper With 10mm Anvil, Self-Closing Spring, Stainless Steel, ISO Calibrated - Metav IndustryLine
Take advantage of accurate, repeatable sheet-thickness checks with a compact instrument that combines a 0–50 mm measuring range, a hardened stainless steel frame and a quick-reading digital display. The self-closing spring and included transport case protect the jaws and improve handling during repetitive measurement tasks. Order the unit directly via Metav Werkzeuge or ask the consultants for tailored advice. Digital Caliper M240.075 — 0–50 mm sheet-thickness caliper with hardened stainless-steel frame and digital display The Digital Caliper M240.075 is a compact, purpose-built caliper for precise sheet-metal thickness measurement in workshop and production environments, providing repeatable readings where fast decisions are required Compact sheet-thickness caliper 0–50 mm Hardened stainless-steel frame, metal housing Digital display with mm/inch and zero functions Self-closing spring for safe, repeatable measuring Accurate checks for sheet-metal production Thanks to a measuring range of 0–50 mm and a display resolution of 0.01 mm, this instrument delivers the fine gradation needed for routine quality control. The stated accuracy of ±0.05 mm suits typical inspection tasks in metalworking and fabrication, making it straightforward to identify material thickness outside specified tolerances. Classified in the micro caliper segment, the design prioritises low deflection and one-handed operation so that small components and thin sheets can be measured reliably without complex setups. Robust build reduces downtime and rework A hardened stainless steel construction with metal housing offers mechanical resilience in daily shop use; the self-closing spring protects the measuring faces during handling and helps maintain consistent contact pressure. The jaws feature round measuring faces and a 10 mm anvil suited to sheet-metal contact, while the supplied transport case ensures safe storage and reduces the risk of transport damage. These features combine to reduce maintenance interruptions and lower the probability of measurement-related rework on the production line. Faster decisions with clear digital operation The digital display provides straightforward unit selection between mm/inch and a convenient zero function for comparative checks or step measurements. The ON/OFF and zero buttons make repetitive controls intuitive, shortening inspection cycles and improving throughput. With a compact, lightweight design, the instrument makes fast acceptance checks possible directly at the machine or bench, removing the need to move components to a separate measuring station and thereby saving time. Practical fit for workshops and inspection benches Designed for sheet-metal applications and general workshop metrology, this caliper supports efficient inspection workflows and steady documentation of batch checks. The combination of repeatable mechanical design and a clear digital interface makes it suitable for production control, incoming goods inspection and rapid in-process checks. Supplied by Metav IndustryLine, the instrument benefits from a manufacturer network that emphasises dependable supply and tailored metrology solutions for industrial customers. For reliable, workshop-ready sheet-thickness inspection, contact Metav Werkzeuge to request a quotation for the Metav IndustryLine digital caliper M240.075 or to speak with a consultant at +49 2822 7131930 Technical data SKU: M240.075 GTIN: 4054469112763 ECLASS: 21170344 Tariff number: 90173000 Range: 0–50 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.05 mm Weight: 0.4 kg Facts Measuring range max: 50 mm Anvil diameter: 10 mm Display units: mm / inch Reading increment: 0.01 mm Housing: metal Special features Hardened stainless-steel construction Metal housing Digital display with ON/OFF, mm/inch and zero Self-closing spring Delivered in transport case Measuring faces: round Manufacturer: Metav IndustryLine FAQ What measuring range does this caliper cover? The instrument measures from 0 to 50 mm, making it suitable for thin sheet and small-part thickness checks with the compact range required in metalworking. What resolution and accuracy can be expected? The caliper offers a resolution of 0.01 mm and an accuracy of ±0.05 mm, which supports reliable thickness assessment for routine inspection tasks. Is the tool designed specifically for sheet-metal thickness measurement? Yes, the geometry and a 10 mm anvil are tailored for sheet-metal contact, and the device is described as a sheet-thickness caliper for straightforward thickness verification. How are readings displayed and switched between units? Readings appear on a digital display with selectable mm/inch units and a zero function for comparative measurements. Does the instrument come with protection for transport? The caliper is supplied with a transport case to protect the measuring faces and electronics during storage and movement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Thickness Dial Gauge 0.01mm Resolution 800mm Depth ISO 17025 Calibrated - Microtech Metrology
For repeatable thickness measurement in workshop and production settings, rely on a compact analogue instrument with 0.01 mm dial divisions, an accuracy of ±0.09 mm and an extended 800 mm measuring depth; the unit is supplied fully calibrated with an ISO 17025 calibration certificate. Order the thickness gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thickness gauge with dial indicator — Microtech Metrology, 0–50 mm range, 0.01 mm resolution Thickness gauge with dial indicator is an analogue instrument for precise material-thickness checks and quality control tasks in machine shops and inspection benches, covering a measuring range of 0–50 mm with an 800 mm reach. Dial display with 0.01 mm resolution ISO 17025 calibrated with certificate Large 800 mm measuring depth Precision that reduces rework and inspection time The instrument combines an analogue dial indicator with fine graduations (0.01 mm) and a well-defined accuracy of ±0.09 mm, making it suitable where rapid, verifiable thickness checks are required. The clear dial and simple mechanics allow quick readings without the delay of power-up routines, which supports faster in-line or batch inspections. The difference between resolution and accuracy is explained at the point of use: while the dial shows increments of 0.01 mm, the stated accuracy specifies the permissible deviation, enabling planners to assess measurement uncertainty for process control. Robust design optimised for repetitive workshop use Built for repetitive handling, the gauge features a compact measuring head and a long measuring depth of 800 mm, permitting checks on large components or deep profiles without improvised fixturing. The analogue mechanism minimises sensitivity to electronic interference and is easy to operate with gloved hands, which improves throughput on the shop floor. The mechanical construction emphasises repeatability and low-maintenance operation, reducing downtime for routine checks and supporting a stable production rhythm. Calibrated traceability that fits quality systems Delivered with an ISO 17025 calibration certificate, this thickness gauge provides traceable measurement results suitable for documented quality procedures and audit trails. The supplied certificate confirms that the instrument was calibrated under an accredited laboratory regime and can be entered directly into a quality management system. For suppliers and inspection departments that must demonstrate metrological rigour, the included calibration reduces administrative steps and supports conformity with internal and external inspection requirements. Discuss application-specific setups or request the ISO 17025 calibration certificate through Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance. Technical data Article number: 137050801 GTIN: 4061905045325 Manufacturer: Microtech Metrology Facts Measuring range: 0–50 mm Resolution (dial divisions): 0.01 mm Stated accuracy: ±0.09 mm Measuring depth: 800 mm Display type: Analogue dial Calibration: ISO 17025 certificate included Special features Category: Dial gauge / thickness gauge Messtiefe 800 mm for deep-reach measurements Suitable for workshop and inspection bench use FAQ What is the smallest increment visible on the dial? The dial shows 0.01 mm divisions, enabling fine readback on each measurement with the analogue display. Is the instrument supplied with a calibration certificate? Yes, the thickness gauge from Microtech Metrology is delivered fully calibrated and includes an ISO 17025 calibration certificate. Which measuring range does the gauge cover? The instrument covers a measuring range of 0–50 mm, suitable for thin to moderate-thickness components. Can the gauge reach into deep or recessed parts? The design provides an 800 mm measuring depth, allowing measurement of recessed features and larger workpieces without additional fixtures. Is this an electronic instrument? No, it is an analogue dial instrument, chosen for quick mechanical readout and simple, robust operation. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Reliable thickness measurement at the workbench
Thickness measurement, also referred to as thickness gauging or thickness testing, is a core quality assurance routine in metalworking and workshop environments. It covers fast, flexible checks at the workbench and ensures that dimensional tolerances are monitored during production.
How the common hand tools work and where to use them
The most frequently used instrument for thickness measurement is the outside micrometer with ratchet, which ensures a constant measuring pressure and thus reduces subjective operator influence. For universal tasks, the caliper remains indispensable; however, because a caliper lacks a defined contact pressure it is more susceptible to pivoting errors, particularly on softer materials. When measuring elastic or very thin workpieces, dial thickness gauges with a defined spring force are often used because they keep the contact force independent of the operator and deliver high reproducibility. External influences must be considered for all hand tools: thermal expansion caused by body heat can affect readings, so instruments should not be held for long periods and must be checked against reference gauge blocks at room temperature.
Practical benefits that improve shop-floor performance
- Reduced operator influence through constant measuring pressure provided by the outside micrometer with ratchet.
- Higher reproducibility when using dial thickness gauges with defined spring force.
- Faster in-process control, enabling immediate corrective action when tolerances deviate.
- Versatility across measurement tasks thanks to the combination of calipers for general checks and micrometres or thickness gauges for precision points.
- Lower rework rates by catching deviations early in the process.
Metav: a dependable precision partner for everyday precision
Metav democratises precision: from its site in Emmerich on the Rhine the company acts as a quality filter for the European market, making high-accuracy measurement accessible to workshops and industry alike. With more than 48,000 customers and a catalogue exceeding 250,000 products, Metav combines decades of technical expertise with a comprehensive range for industry, trades and distributors. For advice on selecting the right thickness measurement tools or on calibration practices, Metav’s specialists can provide tailored guidance to match specific workshop conditions.
Summary
Accurate thickness measurement is the basis for process-related quality control: using the right mix of outside micrometers, calipers and dial thickness gauges minimises operator error, improves reproducibility and allows immediate intervention in the manufacturing process.
FAQ
Which instrument gives the most reproducible thickness reading for thin, elastic materials?
For thin or elastic parts, a dial thickness gauge with a defined spring force typically provides the most reproducible results; within thickness measurement practice, an outside micrometer with ratchet is preferred for general high-precision readings.
How can thermal influence be minimised during hand measurement?
Thermal influence is reduced by avoiding prolonged handling of the instrument, allowing tools to equilibrate at room temperature and routinely checking them against reference gauge blocks as part of thickness measurement procedures.
When is a caliper still appropriate despite its lack of defined contact pressure?
A caliper is appropriate for universal and quick checks, larger features or when speed is required; for critical tolerances within thickness measurement, complementing the caliper with a micrometer or thickness gauge is recommended.
What routine checks maintain accuracy of hand measuring tools?
Regular zero checks, calibration against reference gauge blocks and inspection of the micrometer ratchet or the spring force of thickness gauges are standard procedures to ensure reliable thickness measurement.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com