Precise thickness measurement for reliable quality control
Thickness gauges provide accurate measurement of material and coating thicknesses to ensure component integrity and process compliance. They are used to assess wall thickness in pipes and vessels as well as coating thickness on components, delivering essential data for maintenance and quality assurance in sectors such as metalworking, automotive and petrochemical engineering; common variants include wall thickness gauges, coating thickness gauges and ultrasonic thickness gauges. These instruments enable non-destructive inspection of hard-to-reach areas and support predictive maintenance by detecting thinning or coating wear early. Robust construction and straightforward operation make thickness gauges a practical choice for production and inspection environments.
0-10mm Digitales Dicken-Messgerät mit 0,001mm Ablesung, Mit Timer 5sec., Messkraft 5±0,05N, ASTM D5199-01-A - Microtech Metrology
Das Microtech Dicken-Messgerät überzeugt durch Genauigkeit 0,02 mm und Ablesung 0,001 mm, was schnelle, zuverlässige Dickenmessungen bei weichen Materialien ermöglicht; kombiniert mit der ASTM‑Norm bietet das Gerät reproduzierbare Messergebnisse für Labor und Feld. Für Verfügbarkeit und technische Beratung direkt über Metav Werkzeuge anfragen. Dicken-Messgerät von Microtech Metrology Dicken-Messgerät für präzise Dickenmessung weicher Werkstoffe gemäß ASTM und für Qualitätskontrolle in Laboren und im Feld Kompakte Bauform für feine Messaufgaben Digitale Ablesung 0,001 mm für sichere Protokolle Genauigkeit 0,02 mm entspricht Industriestandards Messflächen Ø56,4 mm für gleichmäßige Auflage Timer 5sec. für Messung an weichen Materialien Präzision, die Prozessen Verlässlichkeit gibt Das Dicken-Messgerät liefert eine Genauigkeit von 0,02 mm bei einer Auflösung von 0,001 mm, wodurch Messunsicherheiten minimiert werden. Diese Kombination aus feiner Ablesung und konstanter Messkraft sorgt für reproduzierbare Daten in der Serienprüfung. Anwender profitieren von klaren Messwerten, die direkt in Prüfprotokolle übernommen werden können. Speziell abgestimmt auf weiche und geotechnische Materialien Dank der großen Messflächen mit Ø56,4 mm und der vorgegebenen Messkraft von 5±0,05 N werden Proben aus Geotextilien und ähnlichen Verbundstoffen schonend und gleichmäßig geprüft. Der integrierte Timer (5 sec.) ermöglicht eine standardisierte Messdauer und reduziert so Einflüsse durch Materialverformung bei weichen Proben. Praktische Handhabung für Prüflabor und Werkstatt Das digitale Display bietet eine schnelle Ablesbarkeit und erleichtert die Dokumentation bei wiederkehrenden Prüfungen. Die kompakte Bauform macht das Gerät transportfähig für Feldmessungen, während die robuste Ausführung den Einsatz in Laborumgebungen ermöglicht. Probenaufbau und Messablauf werden dadurch effizienter. Zielgruppe und Einsatzbereiche Entwickelt für Qualitätsverantwortliche in der Forschung, Prüfstellen und Produktion, eignet sich das Gerät besonders für Hersteller von Geotextilien, Prüflabore und Baustoffprüfstellen. Kleine Laborgruppen profitieren von der schnellen Messung und der einfachen Protokollierung ohne aufwendige Vorbereitung. Empfehlung: Das Microtech Dicken-Messgerät für präzise Dickenmessungen direkt bei Metav Werkzeuge anfragen; Verfügbarkeit und technische Details per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 klären. Produktmerkmale Artikelnummer: 137331232 Marke: Microtech Metrology Bezeichnung: Dicken-Messgerät GTIN: 4061905451966 Fakten Ablesung: 0,001 mm Genauigkeit: 0,02 mm Messbereich: 0-10 mm Messkraft: 5±0,05 N Messflächen: Ø56,4 mm Besonderheiten Digitales Messgerät Timer 5sec. für weiche Materialien Norm: ASTM D5199-01-A Geeignet für: Geotextilien, -netze oder -gemischmaterialien zur Entwässerung Storytrigger: messuhr FAQ Wie genau ist die Messung mit dem Dicken-Messgerät? Die Messung erreicht eine Genauigkeit von 0,02 mm bei einer Ablesung von 0,001 mm, sodass das Microtech Dicken-Messgerät für präzise Prüfaufgaben eingesetzt werden kann. Für welche Materialien ist das Gerät besonders geeignet? Das Microtech Dicken-Messgerät ist ausgelegt für weiche Materialien wie Geotextilien und Verbundstoffe; die Messflächen und die definierte Messkraft gewährleisten schonende und reproduzierbare Messergebnisse. Welcher Messbereich ist abgedeckt? Der Messbereich des Microtech Dicken-Messgerät reicht von 0 bis 10 mm, womit es zur Kategorie Mikro zählt und sich für feine Messaufgaben in Labor und Werkstatt eignet. Welche Norm wird bei der Messung berücksichtigt? Das Gerät entspricht der Norm ASTM D5199-01-A, was eine standardisierte Vorgehensweise für Dickenmessungen an Geotextilien sicherstellt. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
0.75-400mm Angled Ultrasonic Thickness Probe 90° 5MHz Ø10mm Cable ~1m - Metav IndustryLine
Take advantage of a compact Ø 10 mm active face and a broad measurement range of 0.75–400 mm to inspect thin and thick materials with the same transducer; the 5 MHz frequency balances penetration and resolution for general-purpose thickness testing. Order the probe directly via Metav Werkzeuge or ask our consultants if needed. Probe for Ultrasonic Thickness Gauge M502.412 – 90° angled, 5 MHz, Ø 10 mm (Metav IndustryLine) A Probe for Ultrasonic Thickness Gauge M502.412 engineered for accurate thickness measurement from 0.75 to 400 mm, offering an angled transducer for inspections in confined or offset positions Measurement range 0.75–400 mm 5 MHz for balanced penetration and resolution 90° angled transducer for confined access Ø 10 mm active face, compact footprint Reliable readings across a wide range of materials The angled transducer delivers consistent results across a large thickness span by combining a 5 MHz centre frequency with a compact Ø 10 mm contact face. This frequency provides a practical compromise between signal penetration and resolution, making the instrument suitable for typical workshop and inspection tasks where both thin-sheet and moderate-thickness measurements are required. The specified measurement range 0.75–400 mm enables a single transducer to replace multiple probes, reducing setup time and inventory complexity while maintaining reproducible readings when paired with a compatible ultrasonic thickness meter. Designed for inspections in restricted or angled positions The 90° orientation of the active face facilitates access to edges, recesses and areas where a straight probe cannot be aligned. The compact contact diameter supports focused coupling on small features and weld toes, and the approx. 1 m cable gives flexible reach without excess bulk. Mechanical robustness and a small transducer footprint simplify handling during repeated checks: less repositioning is required, which shortens inspection cycles and lowers the risk of operator-induced variability. This configuration is particularly helpful in fabrication, maintenance and quality control environments where space is limited. Practical compatibility and straightforward operation Calibrated instruments paired with this transducer yield efficient inspection workflows, since the probe’s specification matches common ultrasonic gauges used in industry. The transducer’s geometry and electrical connection are compatible with standard measurement setups, supporting rapid exchange and minimal downtime. Clear, reproducible contact and a compact active face reduce coupling fluid usage on small surfaces. For specialised geometries a note is provided regarding the minimum test-piece geometry >Ø20×3, which should be observed to ensure valid readings on strongly curved or thin sections. Choose the Metav IndustryLine 5 MHz 90° angled probe M502.412 for versatile thickness checks from 0.75–400 mm and contact Metav Werkzeuge in Emmerich for expert advice and reliable supply. Technical data Article number: M502.412 GTIN: 4054469162577 Category: Ultrasonic thickness gauge probe Manufacturer: Metav IndustryLine Facts Measurement range: 0.75–400 mm Frequency: 5 MHz Active diameter: Ø 10 mm Cable length: approx. 1 m Connector: 13 Weight: 2.0 kg Tariff number: 90179000 Special features 90° angled transducer Compact active face for confined access Suitable for thin and moderate-thickness measurements Minimum test-piece geometry >Ø20×3 Cable length approx. 1 m FAQ What thickness range can be measured with this probe? The probe supports thickness measurements between 0.75 mm and 400 mm; the M502.412 is optimised for that full span when used with a compatible ultrasonic thickness gauge. Why is a 5 MHz frequency specified and what does it mean in practice? A 5 MHz centre frequency offers a balance between penetration and resolution; the M502.412 uses this frequency to provide reliable returns on a variety of materials without sacrificing measurement clarity. Is the angled design suitable for weld or edge measurements? Yes, the 90° angled transducer on the M502.412 is intended for access to edges, weld toes and recessed areas where a straight probe would be difficult to position. What is the active contact size and why does it matter? The active face is Ø 10 mm; a smaller contact concentrates the ultrasound for localised checks and helps when measuring small features or when limited coupling area is available. Are there any minimum geometry requirements for valid readings? Measurements on strongly curved or narrow parts should observe the stated minimum test-piece geometry (>Ø20×3) to ensure accurate coupling and repeatable results with the M502.412. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.75-400mm Ultrasonic Thickness Gauge Adjustable Sound Velocity 1,000–9,999m/s, USB Bluetooth, Case - Metav IndustryLine
Take advantage of the combination of adjustable sound velocity, a broad measuring range of 0.75–400 mm and reliable USB + Bluetooth data transfer for faster inspection cycles and fewer reworks; order the instrument directly via Metav Werkzeuge or consult the team for specification advice. M502.420 Ultrasonic Thickness Gauge — adjustable sound velocity, 0.75–400 mm measuring range (Metav IndustryLine) The M502.420 Ultrasonic Thickness Gauge is a handheld instrument for non‑destructive thickness measurement of coated and uncoated components across a wide range of materials and geometries Adjustable sound velocity 1,000–9,999 m/s with automatic correction Measuring range 0.75–400 mm for plates and pipes USB + Bluetooth for data export and storage External Ø10 mm probe, 5 MHz, supplied with storage case High‑accuracy readings for quality control The instrument delivers reliable thickness data thanks to its accuracy of ±(0.5%H + 0.01 mm) and dual reading resolution of 0.01 mm for measurements below 100 mm and 0.1 mm from 100 mm upwards. This combination reduces measurement uncertainty for thin sections and thicker components alike, supporting faster acceptance or repair decisions on production lines. The built‑in automatic zero‑point adjustment and programmable sound velocity remove common sources of error when working with coated surfaces or materials of varying acoustic properties. Broad material compatibility for diverse inspection tasks Designed for practical workshop and site use, the gauge is suitable for plates from 0.75 mm and pipes from Ø20 mm × 3 mm, and supports measurement on metals, plastics, ceramics, glass and fibreglass. The selectable Pulse‑echo and Echo‑echo modes extend applicability to layered or corroded structures, enabling meaningful results where single‑mode devices fail. By matching the probe frequency and sound velocity to the component material, the instrument produces repeatable values that integrate well into quality documentation. Efficient data handling and process integration Equipped with USB + Bluetooth data output and onboard data memory, the device simplifies transfer of measured values into inspection reports and digital workflows. The external Ø10 mm, 5 MHz probe provides a focused contact area for small features while the memory function and wireless export reduce transcription errors and speed up batch inspections. Automatic correction of sound velocity and the option to store measurement sets support traceable, auditable quality control procedures. Robust design for workshop use and transport The unit is powered by 3×AA batteries, keeping operation simple and serviceable across sites. With a compact probe design and total weight around 2 kg, the instrument is easy to handle during long inspection sessions. The package includes accessories and a storage case for secure transport and organised storage between shifts. The adjustable sound velocity control (1,000–9,999 m/s) with automatic compensation is particularly useful when switching between metals and non‑metals, ensuring measurement confidence without time‑consuming setup. Contact Metav Werkzeuge for a tailored quotation and advice on integrating the M502.420 into existing inspection routines, available from stock in Emmerich. Technical Data SKU: M502.420 GTIN: 4054469162553 Category: Ultrasonic thickness gauge Weight: 2 kg Delivery includes accessories and storage case Probe: external Ø10 mm, 5 MHz Display: with data memory and automatic zero‑point adjustment Power: 3×AA batteries Data output: USB + Bluetooth Facts Measuring range: 0.75–400 mm Accuracy: ±(0.5%H + 0.01 mm) Resolution: 0.01 mm (< 100 mm) / 0.1 mm (≥ 100 mm) Sound velocity range: 1,000–9,999 m/s (adjustable) Measuring modes: Pulse‑echo and Echo‑echo Tariff code: 90178000 Special features Suitable for plates from 0.75 mm and pipes from Ø20 mm × 3 mm Suitable for metal, plastic, ceramic, glass and fibreglass Automatic correction of sound velocity Onboard data storage and wireless/USB export Delivered with external probe and storage case FAQ What thickness range does the M502.420 cover? The M502.420 ultrasonic thickness gauge measures from 0.75 mm up to 400 mm, covering thin sheets and substantial wall thicknesses for pipes and structural components. Can the gauge measure coated materials reliably? Yes. The instrument is specified for use on coated materials, and its adjustable sound velocity plus automatic correction improve accuracy when coatings would otherwise alter time‑of‑flight readings. What level of accuracy and resolution is provided? Accuracy is ±(0.5%H + 0.01 mm); resolution is 0.01 mm for measurements under 100 mm and 0.1 mm for longer ranges, giving a suitable balance between precision and robustness for industrial inspection. How are measured values exported from the device? The device supports USB and Bluetooth data output and includes onboard data memory, enabling direct transfer of measurement logs into reporting systems or PC software. Which probe is supplied and what is its application? The standard delivery includes an external Ø10 mm probe (5 MHz) that is ideal for focused inspections on small features, thin sections and pipe walls where a compact acoustic footprint is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.75-400mm Ultrasonic Thickness Gauge With Adjustable Sound Velocity, Data Logger, Case - Metav IndustryLine
Take advantage of precise thickness measurement across a wide range and an adjustable sound‑velocity setting for reliable, reproducible inspection results; the gauge is supplied complete with accessories and a protective storage case. Order the Ultrasonic Thickness Gauge M502.410 directly via Metav Werkzeuge or consult our specialists for application advice. Ultrasonic Thickness Gauge M502.410 — 0.75–400 mm range, adjustable sound velocity (Metav IndustryLine) The Ultrasonic Thickness Gauge M502.410 is a portable instrument for fast, non‑destructive thickness measurement in maintenance, production control and incoming inspection across metals, plastics and ceramics Precision ±(0.5%H+0.01 mm) for reliable readings Wide range 0.75–400 mm for diverse materials Adjustable sound velocity 1,000–9,999 m/s Supplied in protective storage case High‑accuracy thickness measurement for mixed production environments The M502.410 implements the pulse‑echo ultrasonic principle to measure wall thickness where access is limited to one side. The instrument covers a broad measurement range of 0.75–400 mm, which makes it suitable for thin sheets and medium‑thickness components alike. The specified accuracy of ±(0.5%H+0.01 mm) describes a combined proportional and fixed error term and delivers predictable tolerances for routine quality checks. This combination of range and repeatability reduces the need for multiple gauges on a single production line and speeds up decision making during inspections. Faster inspections with traceable data and a workshop‑ready design Designed for efficient workflow, the device offers data storage and an automatic zero‑point adjustment, enabling repeatable records and simpler post‑inspection logging. The display resolution is 0.01 mm for measurements below 100 mm and 0.1 mm at or above 100 mm, providing the granularity required in standard mechanical quality control. Powered by 4×AAA batteries and weighing approximately 2 kg, the unit balances endurance and portability. Supplied accessories and the protective storage case ensure that the instrument reaches the workshop ready for immediate use and safe transport between sites. Adaptable acoustic settings and broad material compatibility A key practical benefit is the adjustable sound velocity (1,000–9,999 m/s) with automatic correction, which adapts the instrument to different materials and acoustic conditions without complex recalibration. The gauge is specified as suitable for plates from 0.75 mm and pipes from Ø20 mm×3 mm, and it handles a wide variety of materials including metals, plastics, ceramics, glass and glass fibre. Together with the pulse‑echo mode, this flexibility allows the device to be used for corrosion monitoring, wall‑thickness control and routine maintenance checks in diverse industrial contexts. Contact Metav Werkzeuge in Emmerich for tailored technical advice on the M502.410 ultrasonic thickness gauge and to arrange supply and delivery from our European stock Technical Data Article number: M502.410 GTIN: 4054469162539 ECLASS: 21170347 Customs tariff number: 90178000 Facts Measurement range: 0.75–400 mm Resolution: 0.01 mm (< 100 mm), 0.1 mm (≥ 100 mm) Accuracy: ±(0.5%H+0.01 mm) Weight: 2 kg Battery: 4×AAA Operating sound velocity: 1,000–9,999 m/s Measurement mode: Pulse‑echo Measuring principle: Ultrasonic thickness measurement Special features Data storage and automatic zero‑point adjustment Adjustable sound velocity with automatic correction Suitable for plates ≥0.75 mm and pipes Ø20 mm×3 mm Supplied with accessories and protective storage case Measurement for metal, plastic, ceramic, glass and glass fibre FAQ How accurate is the measurement for typical workshop inspections? The stated accuracy of the M502.410 is ±(0.5%H+0.01 mm); this gives predictable measurement uncertainty across the full 0.75–400 mm range and is suitable for routine production and maintenance checks. Which materials can be measured with this gauge? The instrument is designed for a wide range of materials: metals, plastics, ceramics, glass and glass fibre are explicitly supported by the M502.410 when the correct sound velocity setting is applied. Is the device practical for field use and frequent transport? Yes. The gauge runs on 4×AAA batteries, weighs around 2 kg and is supplied with accessories in a protective storage case for safe transport between jobsites. What measurement principle does the instrument use? The M502.410 uses the pulse‑echo ultrasonic principle, where a transmitted sound pulse reflects from the far surface; the travel time is converted to thickness using the set sound velocity. Can the instrument be adapted to measure different component shapes? Yes. The adjustable sound velocity and pulse‑echo mode allow adaptation to plates and common pipe geometries (suitable from Ø20 mm×3 mm), so the same unit can be used across varied component types. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.75–400mm Straight Ultrasonic Thickness Gauge Probe 5 MHz, Ø10mm, Cable ~1m - Metav IndustryLine
Take advantage of wide measurement capability and a 5 MHz transducer for reliable readings across thin and thick materials, combined with a compact 10 mm probe tip and an approx. 1 m cable for easy access in confined areas; order the probe directly via Metav Werkzeuge or ask our consultants if needed. Probe for ultrasonic thickness gauge 0.75–400 mm, straight (5 MHz, Ø10 mm) — Metav IndustryLine A probe for ultrasonic thickness gauges 0.75–400 mm designed as a straight transducer for general-purpose thickness inspection in workshops and production lines. 5 MHz centre frequency Measurement range 0.75–400 mm Ø10 mm probe diameter Cable length approx. 1 m Broad measurement range that balances penetration and resolution The transducer covers a 0.75–400 mm thickness window, allowing measurements from thin coatings and sheet metal up to substantial plate thicknesses without frequent probe changes. The 5 MHz frequency offers a practical compromise between penetration depth and axial resolution: it improves detection on thicker or corroded components while still resolving interfaces in thinner materials. For engineers and quality technicians, this balance reduces the need for multiple probes and streamlines inspection routines, saving setup time and lowering complexity in routine thickness control. Compact, straight design for confined and standard access points A Ø10 mm tip and a straight design make the sensor ideal where access is limited or where small radii require a slim contact area. The approximately 1 m cable provides freedom of movement at the inspection site while keeping the transducer close to measurement equipment. The robust construction suits workshop environments and frequent handling; the small probe face also helps avoid excessive dead‑zone effects on thin samples, enhancing repeatability when measuring small parts or recessed surfaces. Ease of integration and dependable identification for inventory control The probe is supplied with clear identifiers (SKU M502.411, GTIN 4054469162546) to simplify stock management and traceability. Weight and mechanical dimensions support predictable handling and fixture mounting. As a Metav IndustryLine component, the sensor benefits from the distributor’s emphasis on accessibility and dependable supply: straightforward part identification and consistent availability assist procurement and maintenance planning in production environments. These factors contribute to reduced downtime and more predictable inspection workflows. Contact Metav Werkzeuge for a tailored compatibility check and delivery information for the Metav IndustryLine probe M502.411 — expert advice and stock proximity from Emmerich reduce lead times and ensure correct instrument matching Technical data Article number: M502.411 GTIN: 4054469162546 Tariff number: 90179000 Core technical data Measurement range: 0.75–400 mm Frequency: 5 MHz Probe diameter: 10 mm Cable length: approx. 1 m Weight: 2 kg Features and compatibility Straight transducer design Connector: 13 Type: straight Category: Ultrasonic thickness gauge probe FAQ What thickness range can be measured with this probe? The Metav IndustryLine probe M502.411 measures thicknesses from 0.75 mm up to 400 mm, covering both thin sheets and thicker plates. What operating frequency does the transducer use? The probe operates at 5 MHz, a frequency selected to balance penetration on thicker materials with adequate resolution on thinner samples. Is the probe suitable for confined or recessed measurement points? Yes, the Ø10 mm probe tip and straight form factor are designed to access small or recessed areas where larger faces would not fit. How is the probe identified for inventory and ordering? Identification is via SKU M502.411 and GTIN 4054469162546 to simplify ordering and stock control. Can the probe be mounted or used with standard ultrasonic thickness gauges? The transducer is intended for use with ultrasonic thickness gauges; the connector specification (13) should be checked against instrument compatibility before integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Thickness Gauge Digital With 0.0001mm Resolution, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of laboratory-grade accuracy, fast digital data transfer and ISO 17025 traceability for reliable thickness testing across production and research environments. Order the instrument directly via Metav Werkzeuge or consult their specialists for specification advice and rapid delivery from Emmerich. Thickness Gauge (Dicken-Messgerät) — digital thickness gauge with 0.003 mm accuracy, Wireless + USB, Microtech Metrology A Thickness Gauge that delivers high-resolution thickness measurement in laboratory and production settings, equipped with wireless and USB data output for seamless documentation and traceable results. Digital readout with 0.003 mm accuracy Wireless and USB data output ISO 17025 calibrated with certificate 25 mm measuring depth for small parts Traceable accuracy for quality control The instrument provides a repeatable measurement basis thanks to a stated 0.003 mm accuracy, which supports strict tolerance checks and component acceptance procedures. Calibration to ISO 17025 accompanies the delivery, so every result can be traced back to an accredited standard — an essential requirement for audit-ready quality systems. This combination of precision and formal calibration reduces rework and inspection variability, making the gauge suitable for both laboratory testing and inline quality control. Fast data capture and integration into workflows Equipped with Wireless and USB data outputs and a fine display resolution, the device simplifies data logging and statistical process control. The wireless interface allows untethered transfer to collection software, while USB ensures reliable wired communication for line-side stations. With structured digital output, measurement data can be exported for SPC analysis or archived alongside batch records, shortening the time from measurement to decision and supporting lean inspection processes. Compact design tailored to small components The measuring faces measure 6.35 mm and the instrument offers a 25 mm measuring depth, which suits thin or intricate parts where access is limited. The compact construction maintains stiffness where it matters, producing consistent readings on small geometries. Built as a purpose-designed metrology tool, it combines a readable digital display with a form factor that eases handling and repeatability during series checks or laboratory tasks. Practical benefits for procurement and production planning As a calibrated, ready-to-use instrument with accredited documentation, the gauge reduces start-up overhead for incoming inspection routines. The digital interfaces cut manual transcription errors and support automated documentation. For purchasers and quality engineers, the measurable advantages are fewer rejects, faster acceptance cycles and clearly documented conformity — outcomes that benefit production throughput and supplier control. Contact Metav Werkzeuge for tailored integration advice, delivery options from Emmerich and information on calibration traceability and software compatibility Technical Data Article number: 137001027 GTIN: 4061905044274 Manufacturer: Microtech Metrology Digital instrument: yes Data output: Wireless and USB Facts Measurement range: 0–1 mm Accuracy: 0.003 mm Display resolution: 0.0001 Measuring faces: 6.35 mm Measuring depth: 25 mm SKU: 137001027 Special features ISO 17025 calibration certificate included Category: Thickness gauge / dial instrument Suitable for laboratory and production metrology Wireless data transfer for integration with SPC systems FAQ Is the instrument delivered with a calibration certificate? Yes. The Dicken-Messgerät from Microtech Metrology (thickness gauge, SKU 137001027) is supplied fully calibrated with an ISO 17025 calibration certificate. What data interfaces are available for logging measurements? The device supports both wireless transfer and USB output, enabling connection to data acquisition systems, SPC software or simple file export workflows. What level of accuracy and resolution can be expected? The thickness gauge provides an accuracy of 0.003 mm with a fine display resolution, making it appropriate for tight tolerance inspections in production and laboratory environments. For which parts and applications is this thickness instrument best suited? With 6.35 mm measuring faces and a 25 mm measuring depth, the gauge is optimised for thin, small or hard-to-access components typically inspected in research, precision engineering and series quality checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1.25 mm Coating Thickness Gauge With Dual External Probes, Data Log 500, USB, In Carry Case - Metav IndustryLine
Take advantage of a compact 0–1.25 mm measuring range combined with dual external probes and integrated data storage for reliable quality control; order the gauge directly via Metav Werkzeuge or consult our experts for integration advice. M502.430 Coating Thickness Gauge – 0–1.25 mm, Dual Probes (Metav IndustryLine) The M502.430 is a handheld coating thickness gauge for non‑destructive inspection of coatings on ferrous and non‑ferrous substrates, designed for workshop and production‑line quality assurance. Measuring range 0–1.25 mm Dual external probes F1 and N1 500‑value data memory USB data output for transfer Precise measurement performance to reduce rework and downtime The instrument delivers a measuring range of 0–1.25 mm with a two‑step resolution specification: 0.1 µm up to 99.9 µm and 1 µm from 100 µm, which supports fine control of thin coatings and routine industrial layers alike. The internal data memory for 500 readings together with USB export ensures traceable measurement records that feed directly into quality documentation, reducing manual logging and the risk of transcription errors. The one‑ or two‑point calibration method allows rapid adjustment to reference plates, keeping measurement uncertainty low and compliance procedures efficient. Flexible probe options and accessory set for varied surfaces Equipped with two external probes (F1 and N1), the device adapts to both magnetic and non‑magnetic substrate measurements, making it suitable for coatings such as zinc, aluminium, chrome, copper, rubber, paint, plastic and anodising. The supplied accessory set—control plates plus aluminium and iron reference plates—enables quick on‑site checks and repeatable calibration. Measurement may be taken in single or serial mode to suit spot checks or batch inspections, so the gauge fits inspection benches, maintenance rounds and incoming goods checks without additional tooling. Data handling and practical operation for consistent inspection workflows Designed for everyday use, the gauge runs on 3×AA batteries and weighs approximately 2 kg, offering a balance between robustness and portability. The built‑in datastore and USB output expedite data transfer to spreadsheets or inspection software, supporting traceability in production and simplifying statistical process control. Clear numeric readout and straightforward calibration reduce operator dependency and contribute to reproducible results, while the compact form factor makes integration with existing metrology stations straightforward. Discuss suitability for your production environment with Metav Werkzeuge in Emmerich — request detailed specifications or a datasheet via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M502.430 GTIN: 4054469162560 Manufacturer: Metav IndustryLine Facts Measuring range: 0–1.25 mm Resolution: 0.1 µm (up to 99.9 µm); 1 µm (from 100 µm) Data memory: 500 values Data output: USB Power: 3×AA Weight: 2 kg Customs tariff number: 90178000 Special features Dual external probes: F1, N1 Accessories included: 1× F1 probe, 1× N1 probe, 4× control plates, 1× aluminium plate, 1× iron plate Measurement modes: single, serial Calibration: one‑point or two‑point method Suitable for coatings on zinc, aluminium, chrome, copper, rubber, paint, plastic, anodising FAQ What is the measuring range of the gauge? The M502.430 measures coatings from 0 to 1.25 mm, suitable for thin films up to substantial industrial layers. How accurate is the device for thin coatings? Resolution is 0.1 µm up to 99.9 µm and 1 µm from 100 µm; this combination supports precise control of thin and medium thickness coatings. Which substrates can be measured? The instrument supports coatings on ferrous and non‑ferrous substrates including zinc, aluminium, chrome, copper, rubber, paint, plastic and anodised surfaces. Are the probes interchangeable for different measurement tasks? Yes; the gauge includes F1 and N1 external probes that adapt to magnetic and eddy‑current measurement principles for different substrate types. How is measurement data exported for QA records? Stored readings (up to 500 values) can be exported via the USB data output for transfer into inspection software or spreadsheets. What calibration options are available? Calibration is performed using a one‑point or two‑point method with the supplied control plates to ensure repeatability and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.25 mm Coating Thickness Gauge With USB And Wi‑Fi, Two External Probes, Data Log 500 Values, Case - Metav IndustryLine
Take advantage of precise, repeatable thickness measurement combined with modern data transfer and a robust transport case to speed up inspection routines and reduce paperwork. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Coating Thickness Gauge 0–1.25 mm, USB+Wi‑Fi incl. two probes — Metav IndustryLine Coating Thickness Gauge 0–1.25 mm, USB+Wi‑Fi incl. two probes is a compact portable instrument for non‑destructive thickness measurement of metallic and non‑metallic coatings, designed for workshop inspection and quality control tasks Wide measurement range 0–1.25 mm USB and Wi‑Fi data output 500-value internal data memory Includes two external probes F1 and N1 Precise measurement for consistent quality assurance The Coating Thickness Gauge 0–1.25 mm, USB+Wi‑Fi incl. two probes delivers a broad measuring span that covers thin films up to heavy coatings, making it suitable for repeatable quality checks. The instrument reads with a fine resolution (0.1 µm up to 99.9 µm, then 1 µm from 100 µm), which allows reliable discrimination of thin layers while remaining practical for thicker finishes. Built‑in calibration via one‑ or two‑point procedures and the supplied control plates make traceable measurements straightforward; this supports routine quality control and helps document conformity without lengthy setup. Faster workflows through integrated data transfer and storage Data handling is simplified by USB and Wi‑Fi output plus an internal store for 500 readings, enabling fast transfer to inspection software or a central database. The device supports both single measurement mode for spot checks and serial mode for continuous logging during panel scans, reducing manual entry and accelerating reporting. Powered by standard 3×AA cells and weighing about 2 kg, the unit balances portability with endurance: battery replacement is immediate on the shop floor and the low‑weight design eases handheld operation during extended inspections. Built for the workshop — rugged transport and versatile probes The gauge is supplied with two external probes F1 and N1, a set of four control plates, an aluminium plate and an iron plate, and is delivered in a protective storage case suitable for transport and on‑site use. This accessory package supports rapid verification and switching between ferrous and non‑ferrous applications, helping to avoid downtime. The robust housing and practical carrying case reduce the risk of damage in daily workshop conditions and make routine checks feel more efficient and secure. Where this tester proves its value This measuring instrument is ideal for paintshops, metal finishing lines and maintenance inspections where coatings such as zinc, aluminium, chrome, copper, rubber, paint, plastic and anodising must be monitored. The combination of a wide measuring range, accurate resolution and fast data export supports both spot checks on finished parts and regular batch control. Simple calibration routines and included reference plates mean the device can be commissioned quickly in production environments and integrated into existing quality processes. Contact Metav Werkzeuge for tailored application advice and secure a Metav IndustryLine coating thickness gauge with USB and Wi‑Fi for immediate integration into your inspection routine. Technical data SKU: M502.433 GTIN: 4054469182735 Measurement range: 0–1.25 mm Resolution: 0.1 µm (to 99.9 µm), 1 µm (from 100 µm) Data output: USB+Wi‑Fi Memory: 500 measurements Power supply: 3×AA batteries Weight: 2 kg Measuring modes: single, serial Calibration: one‑point or two‑point method Accessories included: Probe F1, Probe N1, 4× control plates, 1× aluminium plate, 1× iron plate Delivery: transport/storage case Core figures Measurement range (numeric): 0–1.25 mm Memory capacity: 500 values Weight (numeric): 2 kg Power: 3×AA Number of probes: 2 Special features Two external probes F1 and N1 USB and Wi‑Fi data transfer Internal data storage for 500 measurements Control plates and metal reference plates included Transport/storage case supplied Single and serial measurement modes One‑ or two‑point calibration procedure FAQ What materials can be measured with this gauge? The gauge measures coating thickness on a wide range of finishes; typical applications include zinc, aluminium, chrome, copper, rubber, paint, plastic and anodising, as supplied in the product description. How is data exported from the instrument? Data can be exported via USB or Wi‑Fi from the device; the built‑in memory for 500 readings enables batch transfer or incremental uploads to inspection software. Are reference standards included for calibration? Yes. The delivery contains four control plates plus an aluminium plate and an iron plate to perform on‑site one‑ or two‑point calibration routines. What are the measuring modes and when should they be used? Both single and serial measurement modes are supported. Use single mode for individual spot checks and serial mode for continuous logging during panel scans or repetitive inspections. What power source does the instrument use and how portable is it? The unit runs on standard 3×AA batteries and weighs approximately 2 kg, combining portability with practical operating time for routine checks. Which probes are supplied and what is their purpose? Two external probes, F1 and N1, are included to cover different substrate types and application scenarios; they facilitate rapid switching between ferrous and non‑ferrous measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5-200mm Sensor Probe For Surface Roughness Measurement - Filetta
Combine reliable signal integrity with broad compatibility for roughness and thickness testing to raise measurement confidence on the shop floor. The Filetta measuring transducer offers industrial-grade construction and precise signal capture for repeatable quality control; order the unit directly via Metav Werkzeuge or consult our specialists for system integration. Measurement Transducer (Messwertaufnehmer) – Filetta transducer for roughness and ultrasonic thickness gauges Measurement Transducer (Messwertaufnehmer) is a precision sensor designed for integration with roughness metres and ultrasonic thickness testing equipment in industrial metrology and quality-control workflows. Precision signal capture for surface tests Compatible with roughness and ultrasonic systems Industrial-grade construction, SKU MS910.483 Improved measurement accuracy where it matters A dedicated measuring transducer converts mechanical surface or thickness interactions into clean electrical signals, reducing variation caused by interface inconsistencies. By prioritising signal integrity and a stable sensing element, the device supports higher repeatability in production checks and incoming inspection. The resulting data is more reliable for statistical process control and reduces costly rework by helping to detect deviations earlier in the process. Simple integration and durable design for workshop use The unit is designed for straightforward integration into existing metrology setups, enabling connection to standard instruments used in roughness and thickness measurement chains. The construction emphasises robust mechanics and stable mounting to limit measurement artefacts from handling. As a result, commissioning time is minimised and instrument uptime is increased, which supports leaner production cycles and better throughput. Application breadth and supply reliability Suited to both surface texture assessment and ultrasonic thickness verification, this sensor bridges the gap between tactile roughness gauges and ultrasonic instruments in mixed inspection environments. Supplied under the Filetta designation with SKU MS910.483, the transducer benefits from Metav's position as a precision partner: a European quality filter and logistics hub that keeps precision tools accessible to workshops of every size. Trust in consistent availability and technical advice to match the transducer to specific measurement tasks. Contact Metav Werkzeuge for application advice and integration details for the Filetta measuring transducer MS910.483 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: MS910.483 Product: Measurement transducer (Messwertaufnehmer) Brand: Filetta Category: Ultrasonic thickness gauge / roughness gauge Core data No numeric specifications provided in the dataset Special features Application: Roughness measurement; ultrasonic thickness measurement Category path: Measuring instruments > Roughness gauge > Ultrasonic thickness gauge Story trigger: rauheitsmessgerät FAQ What applications is this transducer suitable for? The Filetta measuring transducer (MS910.483) is intended for integration into inspection setups that perform roughness measurement and ultrasonic thickness checks, supporting surface and wall-thickness verification workflows. Can the transducer be connected to existing instruments? Connection depends on the host instrument; the Filetta transducer is built for straightforward integration with common metrology systems — consult the instrument manufacturer or Metav Werkzeuge for interface compatibility. Does the transducer require special handling or mounting? Stable mounting improves repeatability; the transducer should be secured according to the host system’s mechanical interface to preserve signal integrity during measurement. Is the Filetta unit appropriate for production-line quality control? Yes. The transducer’s focus on consistent signal capture and robust construction makes it suitable for routine production checks and incoming inspection tasks in industrial environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1.5-60mm Probe For Surface Measurement, Ultrasonic Compatibility - Filetta
Benefit from a robust measuring transducer with a 1.5–60 mm detection range and proven Filetta engineering for dependable ultrasonic thickness checks; order the unit directly via Metav Werkzeuge or consult our specialist advisors for application matching. Measuring transducer MS910.481 – Ultrasonic probe with 1.5–60 mm range (Filetta) A compact measuring transducer designed for ultrasonic thickness measurement and surface roughness testing, offering straightforward integration into inspection workflows and durable performance for workshop and industrial environments. Wide 1.5–60 mm measuring range Compatible with ultrasonic thickness gauges Filetta industrial-grade construction Consistent thickness readings where it matters most The measuring transducer MS910.481 delivers a measured detection span of 1.5–60 mm, which covers a wide range of thin to medium-thickness components. This range makes the unit suitable for corrosion monitoring, spot checks on welded parts and quality control of machined components. The result is a practical combination of reach and sensitivity that supports efficient non-destructive testing and faster decision-making on production lines. Easy integration reduces inspection complexity Designed for compatibility with standard ultrasonic thickness gauges, the probe simplifies system set-up and maintenance. Clear signal coupling and stable acoustic response translate into fewer repeated measurements and less downtime. The compact probe geometry aids handling in confined spaces, while its predictable response supports repeatable results—helping to streamline inspection routines and maintain throughput in high-volume operations. Practical applications in roughness and thickness control This probe is suitable for both ultrasonic thickness measurement and surface roughness-related inspections in metalworking and fabrication contexts. Typical uses include in-service corrosion checks, incoming material spot checks and quality control of welded assemblies. By pairing MS910.481 with the appropriate gauge, inspection tasks become more reliable and documentation of part condition more straightforward, supporting traceable quality control procedures. Built for durability and trustworthy supply Manufactured by Filetta and offered through Metav’s distribution, the probe benefits from industrial-grade build quality aimed at regular workshop use. The focus on robust materials and consistent manufacture helps maintain repeatability across measurement cycles. Metav’s presence in Emmerich further ensures a dependable supply chain and a quality‑focused selection for professional metrology needs, reinforcing long-term operational reliability. For specification matching or to order the Filetta measuring transducer MS910.481 for integration into an existing ultrasonic measurement setup, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 — our advisors can assist with technical alignment and delivery options Technical Data Article number: MS910.481 Name: Measuring transducer Brand: Filetta Category: Ultrasonic thickness gauge (Ultraschall-Dickenmessgerät) Facts Measuring range: 1.5–60 mm SKU: MS910.481 UID: MS910.481 Special features Application: Roughness measuring device / ultrasonic thickness measurement Industrial-grade construction Compact probe design for confined spaces FAQ What thickness range does the probe cover? The Filetta measuring transducer MS910.481 covers a thickness range from 1.5 to 60 mm and is intended for ultrasonic thickness measurement tasks. Is the probe suitable for corrosion monitoring on pipelines and tanks? Yes, the probe is suitable for spot checks and corrosion monitoring within its 1.5–60 mm detection range when used with a compatible ultrasonic thickness gauge. Can the transducer be used for surface roughness inspections? The transducer is specified for use in contexts that include roughness measuring device workflows, complementing thickness checks where surface condition is relevant. Which devices is MS910.481 compatible with? MS910.481 is compatible with standard ultrasonic thickness gauges; compatibility depends on the gauge’s probe input and software, so verification against the gauge specifications is recommended. How does the probe support repeatable measurements? The probe’s industrial-grade design and stable acoustic response contribute to consistent readings and repeatability across routine inspection cycles. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
100mm Thickness Gauge Digital Indicator, 0.001mm Resolution, ISO 17025 Calibrated - Microtech Metrology
Compact traceability meets workshop practicality: a digital thickness gauge with a 0–100 mm measuring range, 0.001 mm display resolution and an ISO 17025 calibration certificate delivers reproducible readings and audit-ready documentation. Combine reliable precision, clear readout and accredited calibration for smoother quality control — order directly via Metav Werkzeuge or consult our specialists for application advice. Thickness Gauge 'Dicken-Messgerät' — digital readout, ISO 17025 calibrated (Microtech Metrology) Thickness Gauge "Dicken-Messgerät" provides compact, traceable thickness measurement for workshops and laboratories with fine‑mechanical requirements Digital display with 0.001 mm resolution ISO 17025 calibration certificate included 0–100 mm compact measuring range Consistent, traceable precision for quality control The instrument offers high repeatability thanks to its fine display increment and factory calibration. With a display resolution of 0.001 mm and an indicated accuracy of ±0.055 mm, the device suits routine checks where documented results are required. The included ISO 17025 calibration certificate guarantees traceability and simplifies acceptance in internal audits or supplier qualification procedures. This combination of measurable performance and accredited calibration reduces uncertainty and supports a reliable inspection routine. Compact range that favours fine mechanical work With a measuring span from 0 to 100 mm, the unit falls into the micro‑range category for compact precision instruments, making it particularly suitable for small components and assemblies where short measuring faces limit torsion and improve handling. The compact format preserves stiffness and allows straightforward placement on fine parts, resulting in stable readings even during frequent measurements. For workshops focused on small batches, instrument size and range translate directly into faster set‑up and less handling time. Clear results and efficient workshop integration A digital readout accelerates decision cycles by eliminating manual interpolation: readings are immediate and legible, which shortens inspection times and reduces transcription errors. The robust mechanical design and concise interface enable operators to perform rapid thickness checks while maintaining measurement integrity. Accredited calibration and a precise digital display together deliver both efficiency and confidence — fewer repeat measurements, quicker go/no‑go decisions and improved process reliability across production and incoming‑goods inspection. For audit‑ready measurement solutions and tailored advice on Microtech instruments, contact Metav Werkzeuge in Emmerich — our consultants provide practical selection support and delivery solutions. Technical Data Article number: 137100808 GTIN: 4061905045219 Brand: Microtech Metrology Measuring range: 0–100 mm Display resolution: 0.001 mm Indicated accuracy: ±0.055 mm Measuring faces diameter: 10 mm Digital instrument with clear readout ISO 17025 calibration certificate included Category: Micro‑range precision instrument FAQ What accuracy can be expected from this thickness gauge? The thickness gauge from Microtech Metrology delivers an indicated accuracy of ±0.055 mm, with a display resolution of 0.001 mm; the device is supplied calibrated to ISO 17025 standards for documented traceability. Is a calibration certificate supplied with the instrument? Yes, the instrument is delivered with an ISO 17025 calibration certificate, confirming laboratory calibration and traceability of results for quality systems. What is the suitable application area for the 0–100 mm range? A 0–100 mm measuring range places this gauge in the micro class, ideal for small components, fine mechanical parts and workshops that require compact, torsion‑resistant measuring setups. Which brand and SKU identify this product for ordering? This product is supplied by Microtech Metrology and is listed under SKU 137100808 for ordering and reference. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Thickness Gauge Digital Wireless USB, 0.0001mm Resolution, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise measurement, seamless data transfer and certified traceability for reliable quality control and efficient documentation. Order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Thickness Gauge — digital thickness gauge with Wireless + USB and ISO 17025 certification The Thickness Gauge is a compact digital instrument for high‑resolution thickness measurement across workshop and laboratory environments, designed for precise inspection of small components and production samples. Wireless + USB data output ISO 17025 calibration certificate included Measuring range 0–100 mm High resolution 0.0001 mm display Certified precision for dependable quality assurance The instrument delivers a documented measurement standard thanks to its ISO 17025 calibration, supplied with a calibration certificate that supports traceability and audit requirements. With an accuracy of ±0.027 mm and a display resolution of 0.0001 mm, the device reduces uncertainty in routine inspections and short-run production checks. This level of performance helps lower rejects and rework by making measurement discrepancies immediately visible and actionable within established quality procedures. Effortless data capture for process control and documentation Equipped with Wireless transmission and a USB interface, the gauge allows direct data logging into analysis software and quality management systems. Electronic output accelerates documentation and eliminates manual transcription errors, enabling faster feedback loops between inspection and production. The instrument’s measuring faces (Ø 10 mm) and a measuring depth of 400 mm support stable contact and repeatable readings, making the unit well suited to serial checks and statistical process control. Compact design tailored to fine mechanical and laboratory tasks With a measuring range of 0–100 mm, this device belongs to the compact class intended for fine mechanical work where reach and rigidity must be balanced. The form factor supports single‑handed handling while maintaining measurement stability for small parts, gauges and assemblies. Built for workshop and laboratory use, the tool combines ease of use with traceable results, supporting both incoming inspection and in‑process checks without adding complexity to daily routines. Contact Metav Werkzeuge to discuss the Microtech Metrology Thickness Gauge with integrated wireless and USB data output and to arrange delivery of the ISO 17025 calibration certificate; reach us at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 137100407 GTIN: 4061905043901 Manufacturer: Microtech Metrology Digital: yes Data output: Wireless + USB Measuring range: 0–100 mm Facts Accuracy: ±0.027 mm Resolution: 0.0001 mm Measuring depth: 400 mm Measuring face diameter: 10 mm Display: digital Special features ISO 17025 calibration certificate included Wireless data transmission USB interface for direct logging Suited for fine mechanical and laboratory use FAQ Is the device delivered calibrated and traceable? The Thickness Gauge from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability. What measurement range does the instrument cover? The instrument measures from 0–100 mm, making it suitable for compact and fine mechanical components. How precise and repeatable are the readings? Typical performance is an accuracy of ±0.027 mm with a display resolution of 0.0001 mm, which supports reliable repeatability for standard quality checks. How is measurement data exported for analysis? Data can be exported wirelessly or via USB directly from the gauge for integration into SPC software or inspection reports. Which applications benefit most from this gauge? The instrument is aimed at workshops, laboratories and quality departments performing precise thickness checks on small parts, fixtures and assemblies. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Thickness Gauge Digital Wireless/USB, 0.1µm Readout, ISO 17025 Calibrated Certificate Included - Microtech Metrology
Take advantage of a compact, micro‑range instrument with ISO 17025 traceable calibration and both Wireless+USB data output for fast, reliable measurement workflows — order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Thickness gauge — Digital thickness gauge with Wireless + USB, Microtech Metrology Thickness gauge for precision workshop and laboratory use; digital instrument for micro‑range thickness and depth checks with traceable calibration. Digital readout with 0.0001 mm resolution Wireless+USB data output for direct logging ISO 17025 calibration with certificate included Measuring range 0–100 mm (Micro range) Traceable precision that shortens inspection cycles The instrument provides ISO 17025 traceable calibration and is supplied with a calibration certificate, ensuring measurements are auditable and accepted in quality control procedures. With a stated accuracy 0.048 mm, the device supports routine checks where repeatability and documented traceability reduce rework and inspection uncertainty. This calibrated status means the tool can be integrated directly into formal QC routines without additional on‑site calibration steps, saving time during incoming inspection and process control. Streamlined data capture to eliminate transcription errors Equipped with Wireless+USB outputs and a clear digital readout, the gauge transfers measured values electronically, avoiding manual transcription and speeding up reports. The high readout increment of 0.0001 mm facilitates fine adjustments and comparative studies, while direct data export enables seamless connection to SPC systems and spreadsheets. Reduced data handling time and fewer input errors lead to a more efficient inspection workflow and quicker decision making on the shop floor. Micro‑range design for fine mechanical components Classified as Micro range (0–100 mm), this instrument is optimised for compact, high‑precision work such as fine mechanical assemblies and watch components; the shorter measuring geometry keeps the jaws low in torsion and easy to handle in restricted spaces. The small measuring faces 10 mm improve contact stability on small parts, and the extended measuring depth 800 mm allows access to recessed features and stepped measurements not always achievable with standard calipers. The digital format combines convenience with the repeatability required in laboratory and production settings. Contact Metav Werkzeuge today to request a personalised quote for the Microtech Metrology digital thickness gauge, calibrated to ISO 17025, and to receive expert advice from our specialists at the Emmerich quality centre. Technical data Article number: 137100807 GTIN: 4061905045226 Manufacturer: Microtech Metrology Facts Measuring range: 0–100 mm Accuracy: 0.048 mm Resolution (readout): 0.0001 mm Measuring faces: 10 mm Measuring depth: 800 mm Digital: yes Data output: Wireless + USB Special features ISO 17025 calibrated — calibration certificate included Wireless + USB data output for electronic logging Category: Thickness gauge / dial gauge Micro range classification for fine mechanical work FAQ Is the instrument delivered calibrated? Yes. The thickness gauge from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes a calibration certificate with the delivery. What interfaces are available for data transfer? Data transfer is provided via Wireless+USB, enabling direct logging to PCs and SPC systems without manual entry. Is this gauge suitable for watchmaking and micro components? The instrument’s Micro range (0–100 mm) design and small measuring faces 10 mm make it well suited to watchmaking and other fine mechanical applications. What level of precision can be expected in routine use? The device specification lists an accuracy of 0.048 mm and a readout increment of 0.0001 mm, offering repeatable results for standard workshop and laboratory inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Pipe Wall Thickness Gauge Digital Readout, 0.001mm Resolution, 6 Measuring Faces - Microtech Metrology
Take advantage of compact measurement capability (0–10 mm) combined with a high-resolution digital dial and reliable repeatability for fast, traceable pipe wall inspections. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice and rapid dispatch. Microtech Metrology Pipe Wall Thickness Gauge — Digital Dial, 0–10 mm Range The Microtech Metrology Pipe Wall Thickness Gauge is a compact digital measuring instrument designed for rapid and reliable wall-thickness checks on tubes and small-diameter pipes in workshop and quality‑control environments. Compact 0–10 mm measuring range Digital dial with 0.001 mm readout High accuracy 0.012 mm repeatability Six contact faces for versatile measurement Precision where thin walls matter For inspections of tubing and small pipes the decisive factors are repeatability and readable resolution. This digital gauge delivers a measuring range of 0–10 mm with a reading increment of 0.001 mm and a declared accuracy of 0.012 mm, which places it in the compact precision category used for fine mechanical and workshop tasks. The combination of fine resolution and stable contact geometry reduces measurement scatter and supports objective acceptance decisions during corrosion checks or post‑machining verification. Faster inspection cycles and fewer re-measures The instrument’s digital dial shortens reading time and lowers interpretation errors compared with analogue indications. With multiple contact points and a compact form factor the device is optimised for quick repositioning on curved surfaces, helping to accelerate batch inspections and in‑process checks. In practical terms, improved throughput means fewer interruptions to production and a clearer record of measurement outcomes for quality documentation. Built for portable use and shop-floor robustness Engineered for regular workshop handling, the gauge combines a small footprint with a design that keeps the measuring faces aligned on curved workpieces. The compact size suited to the micro measuring class eases single‑handed operation on benches and in fixtures. Durable materials and straightforward mechanics ensure reliable service life in everyday industrial environments, providing a pragmatic balance between precision and usability for inspection teams. For precise pipe wall assessment, request the Microtech Metrology gauge from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and prompt dispatch Technical data SKU: 137011106 GTIN: 4061905044984 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 0–10 mm Resolution (reading increment): 0.001 mm Accuracy: 0.012 mm Number of measuring faces: 6 Special features / Design Digital dial indicator Category: dial gauges (messuhren) eClass: 27200302 UID: 137011106 FAQ What measurement range does the gauge cover? The gauge measures wall thicknesses from 0 to 10 mm; this range is ideal for small tubes and thin‑walled components with repeatable contact geometry. What accuracy and resolution can be expected during routine checks? The instrument provides a resolution of 0.001 mm and a stated accuracy of 0.012 mm, offering fine discrimination for workshop and inspection tasks. Is the device suitable for curved or small‑diameter pipes? Yes — the compact construction and multiple contact faces make the gauge appropriate for small diameters and curved surfaces encountered in tube inspection. Which readout is used for results and documentation? Readings are taken from the digital dial display for fast, unambiguous values that simplify logging and quality records. Who manufactures this instrument and where is it from? The gauge is produced by Microtech Metrology and supplied under that brand and specification (SKU 137011106) for precision inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Pipe Wall Thickness Gauge With Microcomputer Colour 1.5" Touchscreen Wireless USB - Microtech Metrology
Take advantage of a compact instrument that combines 0–10 mm measurement range, 0.01 mm accuracy and modern data transfer for efficient pipe wall inspections; order the gauge directly via Metav Werkzeuge or contact our consultants for tailored integration into existing measurement workflows. Thickness gauge — digital pipe wall measurement, 0–10 mm range, 0.01 mm accuracy A thickness gauge for rapid, portable assessment of pipe and tube wall thickness in workshop and inspection routines, featuring a clear colour display and wired or wireless data output. High precision: 0.01 mm accuracy Compact 0–10 mm measurement range Colour 1.5" touchscreen display Wireless and USB data transfer Precision where thin walls matter The instrument delivers 0.01 mm accuracy across a 0–10 mm range, making it suited to thin-walled pipe inspection and corrosion monitoring where small changes are critical. The unit combines a fine display resolution of 0.0001 mm with a repeatable measuring interface, allowing objective pass/fail decisions in production or maintenance workflows. With six measuring faces, the device adapts to different contact geometries so readings on curved or irregular sections remain consistent. The factual specification supports traceable quality checks and helps maintain documented trends for condition-based maintenance. Integrated data workflow for efficient documentation Equipped with Wireless + USB output and a Colour 1.5" touchscreen, the device simplifies capture and transfer of measurement data to statistical process control or asset-management systems. Wireless transfer speeds up batch inspections; USB connectivity supports local downloads and archival. Clear numeric readout and straightforward menu navigation reduce interpretation time and the potential for manual transcription errors. The combination of digital output and compact interface accelerates data collection cycles and supports reproducible reporting for quality assurance. Built for workshop use and regular inspection cycles Designed for frequent handling, the instrument offers a compact footprint that supports mobile inspection rounds and bench checks alike. The robust digital electronics and straightforward controls mean rapid measurements without elaborate set-up, while the measurable specifications make the device a reliable tool for routine checks in fabrication, repair or inspection shops. Sourcing via an established supplier in Europe adds logistical reliability and ensures availability of spare parts and calibration options when required. Contact Metav Werkzeuge for specialist advice on this thickness gauge and secure fast supply and technical guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 137011107 GTIN: 4061905045424 ECLASS: 27200302 Display: Colour 1.5" touchscreen Data output: Wireless + USB Digital: yes Data Measurement range: 0–10 mm Resolution (display): 0.0001 mm Accuracy: 0.01 mm Measuring faces: 6 SKU: 137011107 Special features Portable digital thickness gauge Colour touchscreen readout Wireless data transfer for quick logging USB connection for local export Suitable for pipe and tube wall checks FAQ What is the measurement range of the instrument? The instrument measures from 0 to 10 mm and is therefore intended for thin-walled pipe and tube applications; the thickness gauge (Microtech Metrology, SKU 137011107) covers this span with stable performance. How precise are the readings produced by the device? Readings are specified with an accuracy of 0.01 mm and a display resolution of 0.0001 mm, enabling the thickness gauge (Microtech Metrology, SKU 137011107) to detect small variations relevant for corrosion monitoring and quality control. Which data transfer options are available for documentation? The device provides Wireless and USB outputs for integration into data-logging workflows; wireless transfer accelerates batch inspections while USB allows direct export and archival from the gauge. Is the instrument suitable for field use in workshops? Yes; the compact format, clear 1.5" colour touchscreen and robust digital interface make this thickness gauge appropriate for routine workshop inspections and mobile measurement rounds. Can measurement results be integrated into quality records? Measurement data from the gauge (Microtech Metrology, SKU 137011107) can be transferred via USB or wirelessly to quality systems, supporting traceable documentation and trend analysis. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital Indicator, ISO 17025 Calibrated, 0.001mm Resolution - Microtech Metrology
Taking advantage of precision calibration and very fine display resolution, this instrument combines traceable measurement confidence with compact handling for micro‑range tasks. Order the instrument directly via Metav Werkzeuge or contact their consultants for specification matching and delivery. Thickness gauge — digital measuring instrument with ISO 17025 calibration (Microtech Metrology) A Thickness gauge designed for high‑precision, small‑range thickness checks in fine mechanical workshops and laboratory quality control. ISO 17025 calibration included Resolution 0.001 mm for fine detail Measuring range 0–10 mm for micro work Measuring depth 120 mm for recessed parts Precise readings that support reliable process control For tasks where repeatable results matter, the instrument delivers a combination of high resolution and documented accuracy. With a display resolution of 0.001 mm and an indicated accuracy of ±0.012 mm, the digital readout lets operators detect and record small deviations that affect fit and function. These technical figures translate directly into fewer reworks and more consistent quality checks on components such as shims, thin sheets and precision turned parts. The clear numerical display reduces interpretation error and speeds up inspection routines, supporting efficient production control and quality assurance. Compact design with reach for practical workshop use Designed within the micro measuring class, the instrument’s 0–10 mm measuring range offers a compact footprint while still covering the essential thickness band used in fine mechanics. The measuring depth of 120 mm increases flexibility: measurements can be taken on small workpieces and recessed features without the need for additional fixtures. A modest measuring face diameter (10 mm) maintains contact stability on small parts, reducing rocking and improving repeatability. The compact construction and digital display make the gauge a suitable choice where bench space is limited and frequent spot checks are required. Traceable calibration and integration into quality systems Delivered fully calibrated to ISO 17025, the instrument includes a formal calibration certificate which documents traceability and measurement uncertainty for audit and compliance purposes. That certificate supports internal quality processes and external reporting, making the gauge a dependable tool for incoming inspection, final acceptance and routine process checks. Sourcing via Metav adds an extra layer of confidence: Metav’s quality filtering for the European market ensures consistent supply and documented conformity, helping workshops democratise precision without compromising traceability. Contact Metav Werkzeuge today for tailored technical advice and to arrange supply of this Microtech Metrology thickness gauge; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 137010128 GTIN: 4061905044687 Manufacturer: Microtech Metrology Core figures Measuring range: 0–10 mm Resolution: 0.001 mm Accuracy: ±0.012 mm Measuring depth: 120 mm Measuring faces: 10 mm Features Digital display Calibration certificate included (ISO 17025) Range class: Micro (0–10 mm) Category: Dial/digital thickness gauge FAQ Is the instrument supplied calibrated and traceable? Yes. The thickness gauge from Microtech Metrology is delivered fully calibrated to ISO 17025, and a calibration certificate is supplied with the instrument (SKU 137010128). What accuracy and resolution can be expected? The instrument provides a display resolution of 0.001 mm and an indicated accuracy of ±0.012 mm, suitable for detailed workshop and laboratory checks. For which applications is this gauge suitable? Typical uses include fine mechanical work, component thickness checks, incoming inspection and laboratory quality control where micro‑range precision is required. How does the measuring depth affect use? A measuring depth of 120 mm enables assessment of recessed features and measurements where a greater reach is necessary, improving flexibility without additional fixtures. What is included in the delivery? Delivery includes the calibrated instrument and the ISO 17025 calibration certificate; additional accessories are not specified in the product data. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital Wireless/USB, 0.1µm Resolution, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high measurement resolution, certified traceability and wireless data transfer for efficient quality control; order the instrument via Metav Werkzeuge or consult our specialists for application advice. Thickness gauge by Microtech Metrology — Wireless + USB, ISO 17025 calibrated the Thickness gauge is a compact digital instrument for precise thickness measurement up to 0–10 mm, designed for laboratory use and fine mechanical quality control. Wireless + USB data output Measurement range 0–10 mm Accuracy 0.011 mm Delivered calibrated to ISO 17025 Minimise rejects with measurable precision The instrument delivers consistent results through a combination of fine reading and proven accuracy: a declared accuracy of 0.011 mm paired with a display resolution of 0.0001 mm provides clear, reproducible measurements. The difference between resolution (the smallest increment shown on the display) and accuracy (the maximum deviation from the true value) is explained to aid correct interpretation of results — the high resolution helps detect minute changes, while the stated accuracy defines the instrument’s measurement certainty for quality control protocols. This balance reduces rework and speeds up inspection cycles in production. Traceable data capture for quality management Connectivity is purpose-built for modern workflows: Wireless + USB data output enables direct logging into SPC systems or laboratory software, improving documentation and auditability. Supplied fully calibrated to ISO 17025, the gauge includes a calibration certificate that supports traceability requirements and simplifies incoming inspection routines. The combination of certified calibration and digital data export supports compliance checks and reduces time spent on manual entry. Compact format for fine mechanical and laboratory tasks Classified in the Micro range (measurement range up to 10 mm), this gauge suits fine mechanical work where compact size and stiffness matter. A measuring depth of 120 mm offers flexibility for small to medium setups while remaining easy to handle on benches and in jig-based inspections. The compact housing and precise measuring faces make the instrument appropriate for laboratories, tooling shops and component manufacturers who require repeatable thickness readings without the bulk of larger devices. For traceable thickness measurement with ISO 17025 calibration, request the Microtech Metrology thickness gauge (SKU 137010127) via Metav Werkzeuge or consult our Emmerich-based specialists for tailored advice. Technical Data Article number: 137010127 GTIN: 4061905045080 Manufacturer: Microtech Metrology Digital: true Facts Measurement range: 0–10 mm Maximum range mm: 10 Display resolution: 0.0001 mm Declared accuracy: 0.011 mm Measuring depth: 120 mm Special features Data output: Wireless + USB Delivered calibrated to ISO 17025 with certificate Compact design for laboratory and fine mechanics FAQ Is the instrument delivered calibrated? The Thickness gauge from Microtech Metrology is supplied fully calibrated to ISO 17025 and comes with the corresponding calibration certificate for traceable documentation. What accuracy and resolution can be expected? Declared accuracy is 0.011 mm while the display provides a 0.0001 mm resolution, enabling fine readings with an established measurement uncertainty. How is measurement data exported? Data transfer is supported via Wireless + USB, allowing direct logging into statistical process control systems or laboratory databases for immediate documentation. Which applications is this gauge suited for? The instrument (SKU 137010127) is aimed at laboratory inspections and fine mechanical quality control, especially where compact size and traceable calibration are required. What does the measuring depth indicate in practice? A measuring depth of 120 mm defines the reach into small assemblies and fixtures, making the gauge flexible for a range of bench and jig measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 30s Timer, Ø10mm Anvils, 1.88N Measuring Force, ISO 2286-3 - Microtech Metrology
The combination of precise 0–10 mm measurement, a 0.02 mm accuracy, and a built‑in 30 s timer supports faster, more reproducible thickness checks for soft materials; order the instrument directly via Metav Werkzeuge or contact the consultants for application advice. Thickness gauge - digital micro range with 30 s timer (Microtech Metrology) The Thickness gauge is a compact digital instrument for fast, repeatable thickness checks on soft and coated materials in workshops and quality control. Digital readout with 0.001 mm resolution Micro range 0–10 mm for precision work Measuring faces Ø10 mm for soft materials Built‑in 30 s timer for repeatable readings Consistent precision for soft and coated materials The instrument is designed for measurements in the micro range (0–10 mm), making it suitable where short, rigid jaws and minimal bending are required. The Ø10 mm measuring faces concentrate the measuring pressure on a small area, which improves contact on compressible surfaces such as rubber and plastic‑coated fabrics. Compliance with ISO 2286‑3 ensures the measurement method matches recognised procedures for flexible coated textiles, giving a verifiable basis for material acceptance and incoming inspection. Reproducible readings that save time A digital display with 0.001 mm resolution combined with a stated accuracy of 0.02 mm provides clear numerical results and reduces interpretation errors common to analogue instruments. The incorporated 30 second timer stabilises the reading interval, so measurements are taken after a consistent dwell time — this reduces variability caused by material relaxation or operator technique. The specified measuring force (1.88 ± 1.9 N) is listed so users can understand how contact pressure affects compressible samples and can reproduce measuring conditions in routine testing. Compact design optimised for the bench or lab With a short measuring range and small footprint, the instrument is easy to position on small test specimens and in confined workspaces. The compact construction supports quick workflows during serial checks or spot tests in production, while the digital readout speeds data capture. Robust measuring faces and a straightforward user interface mean the device integrates naturally into existing quality routines, from R&D labs to production lines, supporting consistent decision-making and fewer retests. Contact Metav Werkzeuge in Emmerich for product selection advice, sample‑application checks or to arrange procurement by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: 137331233 GTIN: 4061905451973 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Resolution: 0.001 mm Accuracy: ±0.02 mm Measuring faces: Ø10 mm Measuring force: 1.88 ± 1.9 N Standard: ISO 2286-3 Special features Digital device 30 s timer for stabilised readouts Suitable for rubber and plastic‑coated fabrics Category: thickness gauges FAQ Is this instrument suitable for very thin films and foils? Yes. The thickness gauge has a micro measurement range of 0–10 mm and Ø10 mm measuring faces that make it appropriate for thin films and compressible foils; repeatable results are aided by the built‑in 30 s timer. What reading accuracy can be expected during routine checks? Routine measurements are displayed to 0.001 mm resolution with an accuracy of ±0.02 mm, providing the balance of precision and robustness expected in workshop and incoming inspection tasks. How does the timer improve measurement quality? The 30 second timer standardises the dwell time between contact and reading, reducing variability from material relaxation and operator technique and improving reproducibility across multiple measurements. Can this gauge be used for textiles and coated fabrics? Yes. The instrument aligns with ISO 2286‑3 methodology for thickness testing of flexible coated textiles and is explicitly indicated for rubber and plastic‑coated fabrics. What is the effect of the measuring force on soft specimens? The specified measuring force (1.88 ± 1.9 N) indicates the contact pressure applied; knowing this value helps to reproduce measuring conditions and to interpret results on compressible materials where force influences apparent thickness. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 30s Timer, Ø50.5mm Anvil, 2±0.02N Force, ISO 5084-0 - Microtech Metrology
Take advantage of precise, repeatable thickness measurement with a compact micro-range instrument that combines 0–10 mm capacity, 0.01–0.02 mm accuracy and a 30-second timer for consistent results — order directly via Metav Werkzeuge or contact our consultants for application advice. Dicken-Messgerät — Digital thickness gauge (0–10 mm, 30 s timer) by Microtech Metrology The Dicken-Messgerät is a compact digital thickness gauge for testing soft materials in quality control and production, offering micro-range measurement and a timed dwell function for reproducible readings. Compact micro range 0–10 mm High accuracy 0.01–0.02 mm 30 s timer and Ø50.5 mm measuring plate Engineered accuracy for repeatable thickness checks This compact measuring instrument is optimised for micro-range tasks: with a measuring range of 0–10 mm it falls into the very small-category instruments suited to delicate materials. The combination of a stated accuracy of 0.01–0.02 mm and a display resolution of 0.001 mm ensures that small dimensional variations are visible and verifiable. A defined measuring force 2±0.02 N minimises operator-induced scatter by applying a consistent contact pressure, which is particularly important when checking compressible samples. Compliance with ISO 5084-0 provides a recognised reference framework for textile thickness measurement and supports audit-ready procedures. Faster decisions through standardised handling and timed measurement Repeatability in production depends on consistent procedure. The instrument’s 30 s timer standardises the dwell time for soft specimens, reducing variability caused by differing manual hold times and helping to speed up batch testing. The Ø50.5 mm measuring plate offers a stable support area that spreads contact across a representative sample spot, lowering local deformation. As a digital device with high readout resolution, the gauge shortens the time from measurement to decision, supporting efficiency in inspection loops and rapid acceptance or corrective action. Built for integration into quality workflows and routine inspection The gauge is tailored for routine quality assurance of soft and flexible materials such as textiles, where small thickness changes can affect fit, performance or material yield. Clear numeric results and the instrument’s compact footprint make it well suited for bench-top laboratories and production-line sampling alike. Traceable measurement practices are supported by adherence to recognised standards, and the instrument’s robustness and repeatability reduce scrap and rework. For specialised enquiries on how this gauge fits a specific test plan, Metav’s consultants can advise on sampling frequency and comparative measurement techniques. For a detailed consultation about the Microtech Metrology thickness gauge and its suitability for textile or soft‑material inspection, contact Metav Werkzeuge — local advice and fast supply from Emmerich are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 137331235 GTIN: 4061905451997 Manufacturer: Microtech Metrology Digital instrument: yes Norm: ISO 5084-0 Facts Measuring range: 0–10 mm Resolution/readout: 0.001 mm Accuracy: 0.01–0.02 mm Measuring surfaces diameter: Ø50.5 mm Measuring force: 2±0.02 N Special features Timer 30 sec. Suitable for textiles eClass: 21170535 SKU: 137331235 FAQ What materials is this gauge intended for? This gauge from Microtech Metrology is specified for soft materials and is particularly suitable for textiles; the instrument’s plate diameter and controlled measuring force make it appropriate for fabric thickness checks. How precise are the measurements? The instrument provides a display resolution of 0.001 mm and an application accuracy in the range of 0.01–0.02 mm, which supports reliable distinction of small thickness differences in quality control. Why is the 30-second timer useful? A timed dwell promotes consistency when measuring compressible samples; using the 30 s timer reduces variability from differing manual hold times and improves repeatability across operators. Can the gauge be used on production benches? Yes — the gauge’s compact micro-range design and digital readout make it suitable for bench-top inspection stations and routine sampling in production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 30s Timer, Ø50.5mm Measuring Face, 5±0.05N, ISO 5084-A3 - Microtech Metrology
Take advantage of precise, textile‑optimised thickness measurement with a digital instrument that combines a 0–10 mm measuring range, a Ø50.5 mm contact face and a controlled 5 ±0.05 N measuring force for repeatable results. Order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Microtech Thickness Gauge (0–10 mm) — digital textile thickness gauge with Ø50.5 mm anvil A Microtech Thickness Gauge for standardised, repeatable thickness checks of soft materials and textiles in laboratory and production environments. Digital readout with 0.001 mm resolution 0–10 mm range for micro measurements Ø50.5 mm measurement face for soft materials Integrated 30 s timer for standardised pressing Consistent results for delicate and soft materials The instrument is tailored to textiles and comparable soft substrates, classified in the micro measurement category (0–10 mm). The relatively large Ø50.5 mm measurement face distributes load evenly across samples, reducing localised compression and improving representativity when testing fabrics, foams or laminates. Combined with a precisely controlled measuring force of 5 ±0.05 N, the setup supports comparable readings across operators and batches, which is essential for quality control and incoming material inspection. High-resolution digital readout accelerates inspection A digital readout with 0.001 mm display resolution allows fine visual discrimination during manual checks, while the practical measurement accuracy of 0.01–0.02 mm reflects the instrument’s application class for workshop and production QC. The distinction between display resolution and measurement uncertainty is important: the display shows fine increments, but reproducible results depend on correct technique, contact geometry and the specified uncertainty range, so the instrument is ideal for process control where small thickness variations must be detected reliably. Built-in timer for standardised measuring routines The integrated 30 s timer supports a standardised dwell time for compression‑sensitive materials, reducing variability introduced by differing operator timing. This simple automation step increases comparability and efficiency in repeated testing sequences and helps align measurement routines with standards such as ISO 5084‑A3, which the instrument is specified to follow for soft material thickness measurement. Practical integration into laboratory and production workflows Designed as a digital thickness gauge suitable for textile labs and small QC benches, the device provides clear numeric output and a compact footprint for benchtop use. The combination of a controlled measuring force, defined contact geometry and digital indication simplifies operator training and lowers the risk of inconsistent results. For routine quality assurance, the gauge supports quick decision‑making and traceable inspection processes without imposing complex software or heavy installation work. Contact Metav Werkzeuge today to discuss delivery, optional calibration and how the Microtech thickness gauge can be integrated into existing inspection routines from our Emmerich facility. Technical data Article number: 137331236 GTIN: 4061905452000 Manufacturer: Microtech Metrology ECLASS: 21170535 Facts Measuring range: 0–10 mm Measurement face: Ø50.5 mm Measuring force: 5 ±0.05 N Resolution: 0.001 mm Accuracy: 0.01–0.02 mm Standard: ISO 5084-A3 Special features Digital display Integrated 30 s timer Suitable for textiles Micro measurement category FAQ What materials is the gauge suitable for? The Microtech thickness gauge is specified for textiles and similar soft materials; the Ø50.5 mm anvil and defined measuring force make it ideal for fabrics, foams and laminated materials. What measurement range and precision can be expected? The device covers 0–10 mm, with a display resolution of 0.001 mm and a practical measurement uncertainty in the range 0.01–0.02 mm, suitable for routine quality control tasks. How does the measuring force influence results? A stable measuring force of 5 ±0.05 N minimises variability from operator pressure; consistent force ensures better comparability between measurements and across operators. Why is the 30 s timer useful for testing? The integrated 30 s timer standardises dwell time during compression of soft samples, improving repeatability and aligning measurement practice with standardised methods. Which standard does the instrument follow? The instrument is specified with ISO 5084‑A3, a recognised procedure for thickness measurement of textiles and related materials. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 5s Timer, 0.001mm Resolution, ISO 2589 - Microtech Metrology
Take advantage of compact digital thickness measurement with 0–10 mm range, 0.001 mm resolution and a 5 s timer for repeatable readings; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Thickness Gauge by Microtech Metrology – Digital, 0–10 mm, 0.001 mm The Thickness Gauge by Microtech Metrology is a compact digital instrument for fast, repeatable measurement of soft materials in workshops and quality‑control environments. Digital readout 0.001 mm resolution 0–10 mm measurement range 5 s hold timer for stable readings Measuring force 3.85 N for repeatability High precision where small dimensions matter Designed for the micro measurement class, this digital instrument covers a 0–10 mm range and is optimised for delicate materials such as leather. The combination of a small measuring span and Ø10 mm contact faces reduces leverage and bending effects, which benefits measurements on thin or flexible samples. With a controlled measuring force of 3.85 N (±0.1 N), the instrument promotes consistent contact pressure, minimising operator‑induced variation and supporting reproducible thickness values. This yields reliable comparative data across batches and short inspection cycles. Digital repeatability and clear traceability The gauge provides a fine 0.001 mm display step and a stated accuracy of ±0.015 mm, enabling precise differentiation of thin materials during incoming inspection or production monitoring. The integrated 5 s timer holds the reading long enough to note values without haste, reducing transcription errors and speeding up inspection routines. Compliance with ISO 2589 offers an objective reference point for quality processes, while the clear digital display shortens decision times in the workshop or at the inspection bench. Such objective metrics support efficiency gains in routine quality control. Practicality for workshop measurement tasks Compact dimensions and an intuitive digital interface allow fast adoption into existing workflows. The instrument’s construction and measurement parameters suit bench‑level quality tasks where space and handling are constrained. By providing consistent, repeatable readings with minimal set‑up, the gauge helps reduce rework and improves process confidence—advantages that translate into measurable time savings in serial control tasks. The device is a pragmatic choice for small‑part suppliers, leather workshops and maintenance departments that require accurate thickness checks without complex integration. For measured, repeatable thickness control from Microtech Metrology, contact Metav Werkzeuge for individual advice and reliable supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 137331234 GTIN: 4061905451980 Manufacturer: Microtech Metrology Facts Measurement range: 0–10 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Measuring force: 3.85 ±0.1 N Measuring faces: Ø10 mm Special features Standard: ISO 2589 Timer: 5 s hold Suitable for: leather Digital instrument with clear display Eclass: 21170535 FAQ What materials can be measured with this instrument? The instrument is designed for soft materials and is explicitly suitable for leather, while remaining useful for other thin, flexible substrates where controlled thickness measurement is required. What are the measurement range and resolution? The gauge measures from 0–10 mm with a display resolution of 0.001 mm, enabling fine incremental readings within the micro measurement class. How repeatable are the readings? Repeatability is supported by the controlled measuring force of 3.85 N (±0.1 N) and the 5 s hold timer; stated accuracy is ±0.015 mm, which helps maintain consistent inspection results. Does the instrument meet any standards? Yes—the device is specified to the ISO 2589 standard, providing a recognised benchmark for thickness measurement of relevant materials. Who is the manufacturer of this gauge? The gauge is produced by Microtech Metrology; the product is supplied with the documented technical specifications above and is intended for workshop and QC use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 5s Timer, 0.6N Contact Force, ISO 9863-1 - Microtech Metrology
Compact digital precision, resolution 0.001 mm and accuracy ±0.015 mm deliver repeatable readings for soft geosynthetics; the built‑in 5 s timer and controlled measuring force further ensure consistency. Order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Thickness gauge — digital 0–10 mm, ISO 9863-1 compliant The Thickness gauge is a compact digital instrument for fast, repeatable measurement of soft and polymeric geosynthetic materials in the 0–10 mm range. Digital display, 0.001 mm resolution Accuracy ±0.015 mm Timer 5 s for consistent readings ISO 9863-1 compliant standard Precision where material softness matters For measurements on delicate, non‑uniform sheets the instrument combines a resolution of 0.001 mm with an accuracy of ±0.015 mm, which translates into reliable numeric control and fewer outliers in quality reports. The fine resolution makes small thickness changes visible, while the stated accuracy defines the realistic tolerance band for process control. These numerical specs support rational decision‑making: acceptance criteria, statistical process control and pass/fail limits are easier to define and defend in documentation. Stable contact for soft and uneven surfaces A controlled measuring force of 0.6±0.1 N and R1 mm measuring faces are tailored to minimise indentation and local deformation on soft or bituminous layers. The integrated 5 s timer holds the measuring head in place long enough for viscoelastic materials to relax, producing consistent, repeatable readings rather than momentary peaks. Conformity with ISO 9863-1 means that results are comparable across labs and suppliers, reducing disputes and improving traceability. Streamlined workflow in testing and production The digital readout and compact form factor speed up routine checks: readings are immediate and easy to record, reducing cycle time for batch inspections. The compact design suits bench testing, on‑site roll inspections or incoming goods control; measurements that once required several attempts can now be taken consistently in fewer steps, improving throughput without sacrificing accuracy. The instrument is explicitly intended for polymeric and bituminous geosynthetic materials, so it integrates well into geotextile quality routines and contractor checks. Who benefits and how it pays back Laboratories, production QA teams and site inspectors gain a dependable tool for small‑range thickness control. The combination of controlled force, rounded measuring faces and a stabilising timer reduces measurement scatter and the need for rework. Backed by a recognised metrology brand, the device supports better process documentation and faster acceptance decisions, aligning technical performance with procurement and quality goals. Contact Metav Werkzeuge for tailored advice on the Microtech thickness gauge and to request purchasing information — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 137331238 GTIN: 4061905452024 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Measuring force: 0.6±0.1 N Display type: Digital Special features Standard: ISO 9863-1 Measuring faces: R1 mm Timer: 5 s Suitable for: polymeric and bituminous geosynthetic materials ECLASS: 21170535 FAQ What measuring range does the thickness gauge cover? The thickness gauge measures from 0 to 10 mm, making it suitable for very thin geosynthetic and polymeric layers. How precise and repeatable are the readings? The instrument offers a resolution of 0.001 mm and an accuracy of ±0.015 mm, so the Microtech thickness gauge (SKU 137331238) provides fine detail and reliable repeatability for quality control. Is the gauge suitable for soft or bituminous geosynthetics? Yes — controlled measuring force of 0.6±0.1 N and R1 mm measuring faces minimise deformation, making it appropriate for polymeric and bituminous materials without uniform thickness. Does the instrument meet an accepted standard? Measurement and procedure conform to ISO 9863-1, ensuring that results are comparable and acceptable in laboratory and commercial settings. What is the purpose of the 5 s timer? The 5 s timer stabilises the reading on viscoelastic or soft materials, allowing transient deformation to settle and improving measurement reproducibility. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge Digital With 5sec Timer, ISO 9863-1-C - Microtech Metrology
Take advantage of precise, repeatable thickness measurements and controlled contact conditions—the digital instrument combines 0–10 mm range, ±0.02 mm accuracy and a controlled measurement force 50±0.5N to deliver consistent results on soft coverings; order the thickness gauge directly via Metav Werkzeuge or ask our consultants if needed. Thickness gauge — Digital, 0–10 mm (Microtech Metrology) A thickness gauge designed for precise checks of polymeric and bituminous geosynthetic coverings, offering a compact micro-range instrument for laboratory and field quality control. Digital instrument with 0.001 mm reading Measurement range 0–10 mm Accuracy ±0.02 mm per ISO Integrated 5 s timer for soft materials Accurate thickness control where it matters The digital construction delivers a 0–10 mm measuring window with a fine reading resolution of 0.001 mm and an accuracy of ±0.02 mm, providing clear numerical results that simplify decision-making in quality control. In practical terms, the high resolution reduces interpretation errors and speeds up inspection routines, while the quantified accuracy offers a verifiable basis for acceptance criteria and process adjustments. This combination supports faster throughput in testing without sacrificing measured precision, which benefits both production lines and laboratory workflows. Consistent compression for soft materials and geosynthetics Repeatable contact conditions are ensured by the specified measurement force 50±0.5N and the built-in 5 s timer, which together standardise the compression of soft or uneven samples. For polymers and bituminous geosynthetics, where thickness readings vary with applied load and settlement time, the timed contact reduces operator-dependent scatter and improves comparability between tests. Compliance with ISO 9863-1-C gives a recognised procedural framework that aids certification and supplier communication, making measurements more defensible during audits and product acceptance. Practical construction for workshop and on-site verification The instrument’s measurement surfaces Ø56.4 mm and compact format reflect a micro-range approach that prioritises handling and stability over long travel, which is ideal for small-area samples and material coupons. The digital readout reduces reading errors associated with analogue scales and simplifies data logging during inspection runs. Ruggedised components and a clear numerical display support both bench-top laboratory use and mobile checks on site, enabling consistent results across different environments without elaborate set-up or extensive training. Confidence in results and process integration By combining measured accuracy, a controlled measuring force and a short timed contact, this gauge promotes reproducible results and straightforward integration into inspection protocols. The instrument supports manufacturers and test labs in maintaining tight tolerances during material qualification and in-process verification. Where contractual specifications demand documented thickness values for geosynthetics, the digital output and standard-conformant method reduce ambiguity and strengthen the evidential value of test records. Contact Metav Werkzeuge today for a technical datasheet or application consultation on this Microtech Metrology thickness gauge; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering guidance. Technical data Article number: 137331237 GTIN: 4061905452017 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Accuracy: ±0.02 mm Reading resolution: 0.001 mm Measuring force: 50±0.5 N Measuring surfaces: Ø56.4 mm Special features Digital instrument Integrated 5 s timer Standard: ISO 9863-1-C Suitable for polymeric and bituminous geosynthetic coverings SKU: 137331237 FAQ What is the measuring range and resolution of the gauge? The gauge measures from 0–10 mm with a reading resolution of 0.001 mm and an accuracy of ±0.02 mm as specified for this Microtech Metrology thickness gauge (SKU 137331237). How does the 5 s timer affect measurements on soft materials? The integrated 5 s timer standardises the contact time before reading, ensuring consistent settlement of soft layers such as bituminous coverings and improving comparability of results obtained with the gauge. Is the measuring force controlled and relevant for repeatability? Yes, the instrument applies a measurement force of 50±0.5N, which limits operator influence and delivers repeatable compression conditions for reliable thickness data. Which standards does the gauge comply with? Measurements are carried out in accordance with ISO 9863-1-C, providing a recognised method for thickness determination on relevant coverings. Can this instrument be used for other materials beyond geosynthetics? While optimised for polymeric and bituminous geosynthetic coverings, the digital format and controlled force make the gauge suitable for a range of soft to semi-rigid materials where the 0–10 mm range and surface geometry are appropriate. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
10mm Thickness Gauge With 5s Timer For Soft Materials, ASTM D5199-01-B - Microtech Metrology
Take advantage of high-resolution digital readings and a controlled measuring force to protect soft samples while ensuring repeatable results; the integrated timer adds process consistency for film and geomembrane testing. Order the device through Metav Werkzeuge or consult their specialists for specification advice and fast delivery. Thickness Gauge by Microtech Metrology — digital device with timer for soft materials The Thickness Gauge is a compact digital measuring instrument designed for quick, repeatable thickness checks on delicate films and geomembranes, offering fine resolution and a low, defined measuring force for minimal sample deformation. 0.001 mm reading resolution Timer function for soft materials ASTM D5199-01-B compliant Suitable for geomembranes Reliable, high-resolution readings for delicate materials The instrument delivers a 0.001 mm display resolution combined with a stated accuracy of 0.02 mm, enabling confident thickness assessment where small deviations matter. The low and stable measuring force (0.633 ±0.006 N) reduces compression of soft samples, so measurements reflect the true material thickness rather than artefacts introduced by the operator. Conformity with ASTM D5199-01-B provides an objective standard reference for laboratory and production monitoring, supporting documentation and traceability in quality control processes. Compact format tuned to fine‑mechanical and film testing tasks With a measuring range limited to 0–10 mm, the instrument belongs to the compact “micro” class of callipers and gauges: ideal where minimal jaw length and high manoeuvrability are required. The small Ø6.35 mm measuring faces and lightweight form factor make the tool especially suited to inspection of geomembranes, packaging films and other soft laminates, where short, stiff jaws reduce bending and improve repeatability. The integrated timer (options for 5 s and 30 s) ensures that readings are taken after a consistent contact time, improving comparability across operators and batches. Process reliability and straightforward integration into inspection routines As a digital measuring device with precise numerical output, the gauge supports rapid data capture and decision-making on the shop floor. The combination of fine resolution, standardised measuring force and an automatic timing feature reduces operator variance and speeds up routine checks, delivering measurable efficiency gains in incoming‑inspection and production sampling. The device’s specification makes it suitable for application-driven test plans and for integration into documented quality systems where reproducibility and compliance are required. For procurement or technical advice about Microtech Metrology’s digital thickness gauge with timer, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and delivery options Technical data Article number: 137331231 GTIN: 4061905451959 Manufacturer: Microtech Metrology Facts Measuring range: 0–10 mm Maximum measuring range: 10 mm Resolution: 0.001 mm Accuracy: 0.02 mm Measuring force: 0.633 ±0.006 N Measuring faces: Ø6.35 mm Special features Digital device Timer: 5 s and 30 s Norm: ASTM D5199-01-B Suitable for geomembranes FAQ How precise are the readings from this thickness gauge? The device provides a display resolution of 0.001 mm and a declared accuracy of 0.02 mm, making the thickness gauge suitable for fine film and membrane measurements. Is the measuring force appropriate for soft materials like geomembranes? Yes; the instrument applies a defined measuring force of 0.633 ±0.006 N to minimise compression of soft samples during measurement. Which standards does the instrument comply with? Measurement and test routines are aligned with ASTM D5199-01-B as indicated in the product specification for the Microtech Metrology thickness gauge (SKU 137331231). Can the gauge help to reduce operator variability during routine checks? The digital readout, fixed measuring force and integrated timer (5 s and 30 s) work together to improve repeatability and reduce operator-induced variation when testing films and membranes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Ensure material integrity with a precise thickness gauge
Thickness gauges, also referred to as thickness meters or thickness testers, are indispensable tools across industries such as metalworking, automotive and chemical processing. These instruments include specialised variants like wall thickness gauges, coating thickness gauges and ultrasonic thickness gauges, each designed to deliver reliable measurements that inform maintenance, quality control and safety decisions.
How the different thickness gauges work in practice
Wall thickness gauges are used to determine the remaining wall thickness of pipes, tanks and boilers and are often employed for corrosion monitoring in petrochemical and food production environments. Coating thickness gauges measure the thickness of paints, lacquers and polymer coatings to ensure compliance with specifications and adequate protection. Ultrasonic thickness gauges operate by sending an ultrasonic pulse through the material and measuring the travel time; from that time and the known sound velocity in the material, the exact thickness is calculated. This method enables contactless measurement where access is limited and where surface coatings should not be penetrated.
Measurable benefits for workshop and production environments
- Improved asset life: accurate thickness readings help plan maintenance and prevent unexpected failures.
- Faster inspections: non-contact ultrasonic measurement reduces inspection time for hard-to-reach areas.
- Compliance assurance: consistent measurement of coating thickness ensures products meet technical specifications.
- Reduced downtime: regular monitoring with a reliable thickness meter enables early detection of wear and corrosion.
- Versatile use: suitable for a wide range of materials, including metals, plastics and composites.
Why choose Metav's range for thickness measurement needs
Metav combines decades of technical expertise with a wide assortment of precision tools, making its selection of thickness gauges a pragmatic choice for industry professionals. With over 48,000 customers and more than 250,000 products available from a centralised stock in Emmerich, Metav supplies consistent quality and dependable delivery for workshops and production sites across Europe. The Metav range is curated to offer practical, field-ready instruments that support both routine inspection and specialised measurement tasks.
Summary
A well-chosen thickness gauge—whether a wall thickness gauge, a coating thickness gauge or an ultrasonic thickness gauge—provides the objective data needed to protect assets, ensure quality and optimise maintenance cycles.
FAQ
What is the difference between a wall thickness gauge and a coating thickness gauge?
A wall thickness gauge measures the material thickness of pipes and vessels to assess structural integrity, while a coating thickness gauge quantifies the thickness of surface layers such as paint or polymer coatings to verify protective performance and adherence to specifications.
Can ultrasonic thickness gauges measure through coatings?
Yes. Ultrasonic thickness gauges calculate thickness from the travel time of an ultrasonic pulse and can measure base material thickness even when a non-intrusive coating is present, making them suitable for coated components that must not be altered.
Which thickness tester is best for corrosion monitoring on pipes?
For corrosion monitoring, a wall thickness gauge or an ultrasonic thickness meter is typically recommended because these instruments reliably detect reduced wall thickness and can be used for periodic inspections on in-service pipes and tanks.
Are thickness meters suitable for non-metal materials?
Many thickness meters, especially ultrasonic models, are suitable for a range of materials including plastics and composites; selection should be based on the material’s acoustic properties and the instrument’s specifications.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com