Precise thickness measurement for reliable quality control
Thickness gauges provide accurate measurement of material and coating thicknesses to ensure component integrity and process compliance. They are used to assess wall thickness in pipes and vessels as well as coating thickness on components, delivering essential data for maintenance and quality assurance in sectors such as metalworking, automotive and petrochemical engineering; common variants include wall thickness gauges, coating thickness gauges and ultrasonic thickness gauges. These instruments enable non-destructive inspection of hard-to-reach areas and support predictive maintenance by detecting thinning or coating wear early. Robust construction and straightforward operation make thickness gauges a practical choice for production and inspection environments.
10mm Thickness Gauge With Microcomputer, Colour 1.5" Touchscreen, Wireless USB - Microtech Metrology
Take advantage of the combination of compact design, accurate 0–10 mm measurement and flexible data transfer for consistent film quality checks. Order the instrument directly via Metav Werkzeuge or consult our specialists for application support. Thickness Gauge with Microcomputer for Foils — Microtech Metrology, 0–10 mm, 1.5" colour touchscreen Thickness Gauge with Microcomputer for Foils is a compact digital instrument for fast, repeatable thickness inspection of films and thin sheets in production and laboratory environments High precision 0.01 mm accuracy Colour 1.5" touchscreen for intuitive control Wireless + USB data output for easy logging Six measuring faces for versatile contact options Accurate thickness control for thin-film production The instrument delivers 0.01 mm accuracy across a 0–10 mm measuring span, making it optimised for fine film and foil applications. This narrow range places the device in the micro category of thickness measurement tools, where compact construction reduces arm deflection and supports high repeatability on small samples. The result is reliable process control and fewer rejects when monitoring coatings, laminates or packaging films. Fast logging and traceable results for quality systems Equipped with a microcomputer and a 1.5" colour touchscreen, the unit simplifies measurement routines and result verification. Measurements can be exported via Wireless + USB interfaces, enabling immediate transfer to inspection software or production databases. The combination of digital readout and accessible data output supports documentation and traceability requirements in quality management systems, speeding up reporting and reducing manual transcription errors. Practical handling and flexible contact options Six dedicated contact faces allow the instrument to be adapted to different sample geometries without complex fixtures, improving throughput when switching between sample types. The compact footprint and clear touchscreen reduce handling time and operator training effort. For users who require a small, robust device for on-bench checks or inline spot checks, this design balances ergonomics with measurement integrity. Contact Metav Werkzeuge today to discuss suitability for film and foil inspection, request a datasheet or place an order via our Emmerich office (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: 137010108 GTIN: 4061905044250 Manufacturer: Microtech Metrology Data output: Wireless + USB Display: Colour 1.5" touchscreen Facts Measuring range: 0–10 mm Accuracy: 0.01 mm Reading in inches: 0.0001 in Digital instrument Special features Microcomputer control for measurement routines Six measuring faces for varied contact geometries Designed specifically for foil and film thickness measurement Compact, low-deflection construction for micro-range precision FAQ Is this device suitable for measuring thin plastic films? The thickness gauge from Microtech Metrology is designed for film and foil measurement within the 0–10 mm range and provides the resolution and data output options needed for plastic film inspection. How are measured values exported for documentation? Measured results can be transferred via the unit’s Wireless and USB interfaces to databases or inspection software for traceable records and further analysis. Does the instrument require special fixtures for small samples? The instrument’s six measuring faces allow adaptation to a variety of sample shapes, reducing the need for additional fixturing when inspecting thin sheets or cut samples. What category of measurement equipment does this instrument belong to? With its 0–10 mm span and compact build, the device falls into the micro category of thickness gauges, optimised for fine mechanical work and repeatable thin-film measurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
12mm Thickness Gauge With Digital Dial For Films, 0.001in Resolution - Microtech Metrology
Take precise, repeatable measurements with a compact digital instrument that combines a digital readout and a 0–12 mm measuring range for film thickness control; the built-in 0.001 in resolution and an accuracy of approximately ±0.012 mm ensure reliable quality checks in production and laboratory environments. Order the Thickness gauge with digital dial gauge for films directly via Metav Werkzeuge or ask our consultants if needed. Thickness Gauge with Digital Dial Gauge for Films — Microtech Metrology, 0–12 mm, 0.001 in The Thickness Gauge with Digital Dial Gauge for Films is a compact digital instrument designed for quick, repeatable thickness checks of films and foils in quality control and production environments. Digital dial readout, 0.001 in resolution Measuring range 0–12 mm Six measuring faces for versatile contact Accuracy ±0.012 mm for consistent readings Fast, reliable thickness control for film production The instrument delivers accurate thickness readings across a small range, making it ideal where frequent checks are required. The digital readout reduces transcription errors and speeds up sampling, while the combination of fine resolution and stated accuracy supports tight process tolerances. This makes the device suitable for inline sampling, incoming material inspection or batch acceptance where reproducible numeric data is critical to maintain product specifications. Versatile contact geometry for repeatable results With six measuring faces, the gauge provides stable contact and reliable placement on flexible substrates. The multiple contact points reduce local deformation of soft films and help achieve repeatable measurements without complex fixturing. For operators not specialised in metrology, the straightforward contact design minimises handling variables, keeping measurement uncertainty low and facilitating consistent comparisons between batches or production runs. Compact build for bench use and routine quality checks Engineered for workshop benches and small lab areas, the instrument's compact format combines ease of handling with robust construction suited to industrial environments. The 0–12 mm measuring range covers typical film and foil thicknesses encountered in packaging, laminates and coatings, while the 0.001 in display resolution allows clear discrimination of thin-layer differences. The result is a practical device that supports efficient quality workflows and short inspection cycles. Contact Metav Werkzeuge for precise specification advice and supply from Emmerich — request the detailed datasheet for integration into production or laboratory routines. Technical data Article number: 137010106 GTIN: 4061905044243 Brand: Microtech Metrology Category: Dial gauges Digital readout: yes Facts Measuring range: 0–12 mm Resolution (inches): 0.001 in Accuracy: ±0.012 mm Measuring faces: 6 Display type: digital eClass: 21170535 Special features Designed for film and foil thickness measurement Compact, bench-friendly design Suitable for production and laboratory sampling FAQ What measuring range does the thickness gauge cover? The Thickness Gauge with Digital Dial Gauge for Films covers a measuring range of 0–12 mm, suitable for most film and foil applications. What resolution and accuracy can be expected from this instrument? The instrument provides a resolution of 0.001 in on the digital display and an accuracy of approximately ±0.012 mm for consistent thickness readings. How do the six measuring faces benefit measurement of films? The six measuring faces give multiple stable contact points that reduce local deformation of soft substrates and improve measurement repeatability when testing flexible films and foils. Is the readout digital and easy to read during routine inspections? Yes, the gauge features a clear digital display that simplifies reading and logging values during routine quality control and sampling operations. Is this instrument suitable for production and laboratory environments? The compact, robust design and the specified accuracy make the instrument well suited for both production-line sampling and bench-top laboratory checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150-300mm Digital Thickness Gauge Colour Touchscreen, Wireless USB, 400mm Depth - Microtech Metrology
Combine the ±0.06 mm measurement accuracy with a 150–300 mm measuring range and wireless data transfer to speed up inspection routines and reduce transcription errors. Order the instrument directly via Metav Werkzeuge or request tailored advice from their technical consultants for integration into production workflows. Microtech Thickness Gauge — digital thickness gauge with 150–300 mm range and 1.54" colour touchscreen The Thickness Gauge by Microtech Metrology is a digital precision instrument for rapid, repeatable thickness measurement in workshop and quality‑control environments, designed for inspection benches and industrial metrology applications within the 150–300 mm range. 150–300 mm measurement range Colour 1.54" touchscreen display ±0.06 mm measurement accuracy Wireless and USB data output Reliable precision for production control High throughput and consistent decision‑making require reliable measurement. The instrument delivers a stated accuracy of ±0.06 mm, which positions it for routine quality checks and dimensional control tasks where this tolerance meets the specification. The digital readout uses a 1.54‑inch colour touchscreen, making numeric results and menus easy to read at the workbench; this reduces reading errors compared with purely analogue instruments and supports faster process decisions. The combination of measured value stability and clear display helps to shorten inspection cycles while maintaining traceable results. Seamless data handling to reduce administrative overhead Efficient data capture is essential for modern traceability and statistical process control. This gauge offers Wireless and USB data outputs, enabling direct export of measurement logs to inspection software or a PC without manual entry. The wireless connection reduces cable clutter and allows flexible placement on the shop floor, while USB provides a reliable wired option for bench‑level integration. The instrument therefore supports both ad‑hoc logging and structured data collection, helping to simplify documentation and speed up report generation for quality records. Designed for workshop use with extended reach Practicality matters in routine use: the device includes a measuring depth of 400 mm, which permits measurement of components with recessed features or larger assemblies that standard bench gauges cannot reach. Ten measuring faces increase the contact options for different geometries and improve adaptability to diverse parts. Rugged digital electronics and an intuitive touchscreen interface help to reduce operator training time and promote consistent handling across shifts, supporting repeatable results in a busy production environment. For practical advice on integrating the Microtech thickness gauge into existing workflows or for a demonstration of data export options, contact Metav Werkzeuge for application support and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: 137300407 GTIN: 4061905460029 Brand: Microtech Metrology Digital display: Colour 1.54" touchscreen Data output: Wireless + USB Facts Measurement range: 150–300 mm Accuracy: ±0.06 mm Measuring depth: 400 mm Measuring faces: 10 eClass: 21170535 Special features Digital instrument for thickness measurement Wireless and USB connectivity Colour touchscreen for improved readability Category: Measuring instruments / dial gauges FAQ What measurement range does the instrument cover? The Microtech thickness gauge covers a measuring range of 150–300 mm (SKU 137300407), suitable for component thicknesses within that band. What is the stated measurement accuracy? The device specifies an accuracy of ±0.06 mm, which is appropriate for routine inspection and production control where that tolerance is acceptable. How can measurement data be exported? Measurement results can be exported via Wireless or USB output, allowing direct transfer to a PC or data‑collection system for traceability and SPC workflows. Can the gauge measure recessed or deep features? Yes; the instrument offers a measuring depth of 400 mm, which increases accessibility to recessed surfaces and larger assemblies compared with shallow‑reach gauges. Is a calibration certificate included with the product? The product data does not specify a supplied calibration certificate; calibration status is not detailed in the provided information. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150-300mm Thickness Gauge Digital Dial With 0.001mm Resolution, 400mm Depth - Microtech Metrology
Take advantage of the combination of precise digital readout, a broad measurement range 150–300 mm and extended measuring depth 400 mm for dependable thickness control in production environments. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Thickness Gauge (Dicken-Messgerät) – digital dial, 150–300 mm range (Microtech Metrology) The Thickness Gauge is a digital measuring instrument designed for workshop and quality-control tasks where reliable thickness checks of medium-sized components are required. Digital readout, 0.001 mm resolution Measurement range 150–300 mm 400 mm measuring depth for larger parts Robust design for workshop use Accurate, repeatable readings for production control The core advantage of the instrument is its digital measurement chain, which provides a stable numerical result and avoids subjective interpretation. With a reading step of 0.001 mm and an indicated accuracy ±0.07 mm, the device is suited to routine dimensional checks where repeatability and traceable results are required. This performance reduces setup iterations and inspection time, supporting a smoother workflow in small-series production and quality assurance stations. Practical range and depth for larger workpieces Equipped with a measurement range 150–300 mm and a measuring depth 400 mm, the gauge accommodates components that exceed typical bench‑scale parts while still being manageable in a standard workshop. The instrument’s contact faces (10 mm) give a defined area for consistent placement on curved or flat surfaces, which helps maintain stable contact force during measurement. These dimensions make the tool a practical choice for maintenance departments, jigs and fixtures inspections, and mid‑range production checks. Clear numeric display and straightforward interpretation A digital dial simplifies reading and documentation: the 0.001 mm resolution ensures that even small deviations are visible on-screen, while the numeric display removes the need for manual interpolation. For teams less familiar with metrology, this clarity shortens training time and lowers the risk of transcription errors during quality reports. When process control is the priority, the combination of fine resolution and easy-to-read digits supports faster decision-making and reduces scrap and rework. Durability, handling and integration into the workshop The instrument is built for regular use in industrial environments, offering a robust housing and a design that stands up to routine handling. The digital format facilitates quick checks on the shop floor and can be complemented by existing data‑capture workflows; where further integration is required, Metav Werkzeuge can advise on compatible interfaces and procedures. The unit’s balanced form factor keeps it easy to position while the extended measuring depth enables checks on parts that would otherwise require additional fixturing. For tailored advice or to request procurement through Metav Werkzeuge—based at Emmerich with European stock and reliable logistics—contact our consultants who will recommend the best configuration for the intended application. Technical data Article number (SKU): 137300408 GTIN: 4061905454912 Brand: Microtech Metrology Category: Dial gauge / Thickness measuring instrument Facts Measurement range: 150–300 mm Measuring depth: 400 mm Resolution (reading): 0.001 mm Indicated accuracy: ±0.07 mm Measuring faces: 10 mm Special features Digital display Designed for workshop and QA use Image available for reference FAQ What is the smallest increment visible on the display? The display shows readings in steps of 0.001 mm, allowing fine adjustment and precise recording during inspection with the Microtech Metrology thickness gauge (SKU 137300408). Is the instrument suitable for production spot checks on medium-sized parts? Yes; the 150–300 mm measurement range and 400 mm measuring depth make it suitable for routine production checks and mid‑sized workpieces. How reliable are the measurements compared with analogue gauges? Digital readout removes visual interpolation errors and, together with the stated accuracy of ±0.07 mm, provides a dependable result for many workshop and QA applications. Can the gauge be used on curved surfaces? The measuring faces (10 mm) provide a defined contact area that aids consistent placement on both flat and mildly curved surfaces; for strongly contoured parts, specific fixturing may be recommended. Which environments and tasks is this instrument intended for? The device is intended for workshop inspection, jigs and fixtures checks, and quality-control routines where medium-range thickness measurement and clear digital readings are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
150-300mm Thickness Gauge Digital Indicator, 0.001mm Resolution, 800mm Depth - Microtech Metrology
The combination of a high‑resolution digital readout and a wide 150–300 mm measuring range ensures reliable thickness control across medium‑sized components; pair this with robust construction and a deep measuring throat for consistent inspection cycles. Order the thickness gauge directly via Metav Werkzeuge or consult our advisors for integration into existing inspection routines. Thickness gauge — digital dial, 150–300 mm measuring range (Microtech Metrology) The thickness gauge provides precise digital measurements for quality control and workshop inspection of medium‑sized workpieces, ideal for repeatable thickness checks in production and incoming inspection. Digital readout with 0.001 mm resolution Measuring range 150–300 mm Measuring depth 800 mm Robust construction for repeatable inspection Faster, verifiable thickness control for production A clear digital readout with a reading of 0.001 mm reduces interpretation errors and speeds up routine checks, turning manual measurement into a reproducible data point. The instrument’s specified accuracy of approximately ±0.095 mm supports objective decision‑making during process control: fewer ambiguous measurements lead to fewer reworks and a steadier production flow. By converting each check into a fast, auditable value, the gauge helps to tighten tolerances without slowing down the shopfloor. Designed for practical handling and deeper access With a measuring range of 150–300 mm and a measuring depth of 800 mm, the device reaches further into assemblies and larger components than compact comparators while remaining easy to operate. The measuring faces and mechanical guidance are engineered for repeatability, so every measurement is taken from a stable reference geometry. The digital instrument form factor simplifies reading and data capture compared with analogue alternatives, which is particularly useful in busy inspection benches and bench‑mount setups. Built for consistent inspection and traceability Engineered for regular use in workshop and laboratory environments, the gauge supports quality assurance procedures by delivering consistent numeric results that can be recorded in inspection logs. The combination of a high‑resolution display and a wide working depth makes it suitable for routine QC, batch sampling and incoming part verification. Backed by a recognised manufacturer, the tool integrates into established inspection routines and contributes to demonstrable product quality over time. For assistance selecting the right configuration or arranging delivery via Metav Werkzeuge, please contact Metav Werkzeuge for personalised advice by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data SKU: 137300808 GTIN: 4061905454929 ECLASS: 21170535 Manufacturer: Microtech Metrology Numeric data Measuring range: 150–300 mm Reading / Resolution: 0.001 mm Indicated accuracy: 0.095 Measuring depth: 800 Measuring faces: 10 Special features Digital dial display Category: Dial indicators / measuring instruments Suitable for workshop and laboratory inspection Manufacturer: Microtech Metrology FAQ What is the resolution of the digital display? The digital display provides a resolution of 0.001 mm for fine incremental readings on the thickness gauge from Microtech Metrology. Which measuring range does the instrument cover? The instrument covers a measuring range of 150–300 mm, suitable for medium‑sized components and assemblies. Can this gauge reach recessed areas of large parts? Yes, with a measuring depth of 800 mm the gauge is designed to access deeper or recessed measurement points where shorter instruments cannot reach. Is the device appropriate for routine quality control in production? The device is well suited to routine QC tasks; its digital readout and repeatable guidance help to standardise measurements in production and incoming inspection. Who manufactures this thickness gauge and where can technical specifications be verified? This thickness gauge is manufactured by Microtech Metrology; additional technical specifications and verification documents can be requested from the manufacturer or via Metav Werkzeuge. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1500mm Coating Thickness Gauge Magnetic And Eddy-Current Measurement, Data Logger USB, ISO 2178/2160 ASTM D7091 - Metav IndustryLine
Compact, accurate and designed for workshop use: the combination of a 0–1.5 mm measurement range, reliable magnetic and eddy‑current measurement principles and integrated data storage ensures efficient coating inspection and traceable results. Order the M502.440 Thickness Gauge directly via Metav Werkzeuge or ask our consultants if needed. M502.440 Thickness Gauge – compact 0–1.5 mm, Metav IndustryLine The M502.440 Thickness Gauge is a compact, portable instrument for non‑destructive coating thickness measurement on both magnetic and non‑magnetic substrates. Compact range 0–1.5 mm for coatings Measures by magnetic & eddy‑current methods Stores up to 1,500 readings internally USB output and dual resolution readout Precise results for routine quality control The M502.440 delivers a measurable benefit where repeatable coating checks are required: a measurement range of 0–1.5 mm (0–1500 µm) combined with an accuracy of 3% + 0.003 provides a dependable balance between range and precision. The instrument's dual readout mode – 0.1 µm up to 999.9 µm, 1 µm from 1000 µm – permits fine discrimination in thin coatings while remaining practical for thicker layers. This technical setup reduces rework and supports efficient decision‑making on the production floor by supplying clear, standardised values. Measurement technology and suitable applications Using both magnetic and eddy‑current measurement principles, this gauge is suited to a wide variety of coating‑on‑substrate combinations. It measures non‑magnetic coatings such as zinc, aluminium, chrome, copper, rubber, paint, plastic and anodised layers on magnetic bases, and it also assesses non‑conductive coatings on non‑ferrous metals. The dual‑principle approach avoids measurement blind spots typical of single‑method devices and broadens applicability across maintenance, automotive, metal finishing and fabrication tasks, making the instrument a versatile workshop companion. Data handling, traceability and standards conformity Data capture is optimised for production workflows: internal memory holds 1,500 readings and measurements can be exported via USB for documentation or statistical evaluation. The device supports a one‑point calibration procedure to ensure repeatable baseline performance. Conformity to recognised standards is indicated by compliance with ISO 2178, ISO 2160 and ASTM D7091, which underpins laboratory acceptance and integration into routine quality assurance processes. Compact design, robust packaging and practical operation Designed for portability and everyday use, the gauge comes with a protective storage case and accessories for safe transport and immediate operation. With compact dimensions of 88 x 67 x 30 mm and a weight of 2 kg, the instrument is easy to position for spot checks while remaining rugged enough for the workshop environment. Power is supplied by 3× AAA batteries for quick field deployment, and the digital display with onboard memory simplifies batch inspections without immediate PC connection. Choose the Metav IndustryLine M502.440 for compact, traceable coating inspection and contact Metav Werkzeuge in Emmerich for tailored advice and reliable delivery. Technical data Article number: M502.440 GTIN: 4054469181493 Dimensions: 88 x 67 x 30 mm Weight: 2 kg Batteries: 3× AAA Includes accessories and storage case Core specifications Measurement range: 0–1,500 µm (0–1.5 mm) Resolution: 0.1 µm (up to 999.9 µm), 1 µm (from 1000 µm) Accuracy: 3% + 0.003 Data memory: 1,500 readings Data output: USB Standards: ISO 2178, ISO 2160, ASTM D7091 Features Measurement principle: magnetic and eddy‑current methods Calibration method: one‑point calibration Digital display with data storage Compact, portable design Category: coating thickness gauge Manufacturer: Metav IndustryLine FAQ What measurement range does the gauge cover? The Metav IndustryLine M502.440 thickness gauge measures coatings from 0 to 1.5 mm (0–1500 µm), suitable for both thin films and thicker protective layers. Which measurement principles are used? The instrument works with magnetic and eddy‑current methods to cover coatings on magnetic substrates and on non‑ferrous metals respectively. How accurate is the measurement? Accuracy is specified as 3% + 0.003, with a dual resolution of 0.1 µm for fine readings and 1 µm for thicker coatings; the device complies with ISO 2178, ISO 2160 and ASTM D7091. Can measurement data be saved and exported? Yes—up to 1,500 readings can be stored internally on the device and exported via USB for documentation or further analysis. Is calibration supported? A one‑point calibration method is provided to establish a measurement baseline and maintain repeatability during routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Thickness Gauge Digital Indicator Readout, 0.001mm Resolution - Microtech Metrology
Take advantage of a compact inspection instrument that combines a digital readout with a 0–150 mm measuring range and a generous 400 mm measuring depth for flexible workshop checks; order the thickness gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thickness Gauge with Digital Indicator — 0–150 mm range, 0.055 mm accuracy (Microtech Metrology) The Thickness Gauge is a digital measuring instrument designed for fast, repeatable thickness checks and intermediate-depth measurements in workshop and quality‑control environments. Digital readout for fast readings 0–150 mm measuring range 0.055 mm stated accuracy 400 mm measuring depth Precise results for standard workshop inspection This measuring device delivers a balance of reach and stiffness ideal for everyday checks in production and maintenance. The 0–150 mm measuring range places it in the standard class for machine and metalworking tasks, offering the familiar handling of a compact inspection tool while still covering larger components. The digital readout with a display resolution of 0.001 mm enables clear numerical readings, and the stated 0.055 mm accuracy provides a reliable tolerance band for routine accept/reject decisions without time‑consuming interpretation. Faster throughput with repeatable measurements Engineered for repetitive use, the instrument shortens inspection cycles through an unambiguous digital display and a stable contact geometry. A measuring depth of 400 mm allows checks on recessed or deeper areas without special fixtures, reducing handling time and potential rework. Robust contact faces (10 mm diameter) and a solid spindle travel mechanism help maintain measurement consistency; the result is improved inspection throughput and fewer bottlenecks on the shop floor when implementing batch sampling or incoming goods checks. Traceability and workshop integration Identification and procurement are straightforward: the device is listed with a GTIN and a supplier SKU for inventory and quality records, simplifying traceability in regulated workflows. As a member of the digital indicator category, the unit fits inspection benches and portable test kits alike, supporting both handheld checks and fixed‑station tasks. Clear numeric output and durable construction make this an efficient choice where reliable thickness assessment must be repeated across shift cycles. Contact Metav Werkzeuge for tailored application guidance or to arrange procurement of this Microtech Metrology thickness gauge with 0–150 mm range and 0.055 mm accuracy Technical data SKU: 137150408 GTIN: 4061905454882 Category: Messuhren Facts Measuring range: 0–150 mm Display resolution: 0.001 mm Stated accuracy: 0.055 mm Measuring depth: 400 mm Measuring faces: 10 mm Special features Digital indicator Suitable for workshop and quality control Manufacturer: Microtech Metrology FAQ What is the measuring range of this thickness gauge? The thickness gauge offers a measuring range of 0–150 mm, making it suitable for standard workshop and machine‑building inspection tasks. What resolution and accuracy can be expected from the device? Readings are shown with a resolution of 0.001 mm and a stated accuracy of 0.055 mm, which supports reliable pass/fail assessments in routine quality checks. Can the gauge measure in recessed areas? Yes, the 400 mm measuring depth enables measurements in deeper or recessed features without additional extensions. Are the contact faces suitable for small workpieces? The instrument uses 10 mm contact faces that provide a good compromise between stable contact and accessibility for many component geometries. How is the product identified for ordering and stock control? The unit is listed with GTIN 4061905454882 and SKU 137150408 for straightforward procurement and inventory management. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Thickness Gauge Digital Indicator, 0.001mm Resolution, 800mm Depth, Measuring Faces 10mm - Microtech Metrology
Benefit from a digital indicator with ultra-fine reading and a practical 0–150 mm range for routine thickness control; combined with an 800 mm measuring depth this instrument supports consistent throughput and reliable inspection. Order the thickness measuring instrument directly via Metav Werkzeuge or ask our consultants for application advice. Microtech Metrology thickness measuring instrument – digital indicator, 0–150 mm range Microtech Metrology's thickness measuring instrument provides a compact, workshop-ready solution for precise layer and part thickness checks in production and quality control. Digital indicator, 0.001 mm reading Measuring range 0–150 mm 800 mm measuring depth Standard-class device for machine shop use Precision for everyday quality control The device pairs a clear digital indicator with a finely graduated readout, delivering a 0.001 mm display step that improves repeatability in serial inspection tasks. The specified nominal accuracy of 0.08 mm is suitable for standard workshop tolerances and supports rapid decisions on conformity; the digital readout reduces reading errors compared with analogue alternatives. This makes the instrument a pragmatic choice when balancing speed and traceable measurands in routine quality control. Practical design that speeds workflow Built for the standard measuring bracket, the instrument’s 0–150 mm span covers the majority of shop-floor applications while retaining a compact footprint and good handling. The generous measuring depth of 800 mm enables access to recessed or stepped features without improvised fixtures, shortening set-up time and lowering throughput variability. Robust contact faces minimise edge damage during repetitive checks, so inspection cycles remain efficient and reproducible. Clear data and straightforward integration A digital display simplifies reading and documentation; the stable readout aids consistent decision-making during batch inspection or in-process checks. As a dial-style thickness instrument with a digital indicator, it is well suited to complement existing measuring chains in machine shops and small series production. When traceable records or higher-level integration are required, the instrument can be paired with external data-logging solutions through standard procedures to maintain quality-system compliance. Why this instrument matters in the workshop For shops seeking dependable measuring equipment without unnecessary complexity, the combination of a digital readout, standard-range coverage and a deep measuring capability offers tangible benefits: faster inspections, fewer read errors and reduced rework. The construction and operating concept are focused on pragmatic, repeatable use rather than experimental feature sets, which helps stabilise process control and improves overall plant reliability. Contact Metav Werkzeuge for expert advice and to source the Microtech Metrology thickness measuring instrument with digital indicator and 0–150 mm range Technical data Article number: 137150808 GTIN: 4061905454905 Brand: Microtech Metrology Category: Dial gauges / Thickness gauges Facts Measuring range: 0–150 mm Resolution: 0.001 mm Stated accuracy: 0.08 mm Measuring depth: 800 mm Digital display: yes Special features Measuring faces: 10 eClass: 21170535 SKU: 137150808 FAQ What measuring range does the instrument cover? The Microtech Metrology thickness measuring instrument covers 0–150 mm, making it suitable for standard workshop and machine‑shop applications (SKU 137150808). What resolution and stated accuracy are specified? The device shows readings to 0.001 mm on the digital indicator; a stated accuracy of 0.08 mm is given for routine inspections. For which applications is this instrument intended? Designed as a standard‑class thickness gauge, it is intended for everyday tasks in machine building, metalworking and production quality control where reliable, repeatable thickness checks are required. Can the instrument reach recessed measurement points? Yes. The 800 mm measuring depth allows access to deeper or stepped features without additional extension fixtures in many practical situations. Is the display digital or analogue? The unit is supplied with a digital indicator, providing a clear numerical readout for quick decision-making during inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Thickness Gauge Digital Touchscreen Wireless USB, 0.1µm Resolution, 10mm Faces, 400mm Depth - Microtech Metrology
Take advantage of the combination of precise measurement, flexible data transfer and an intuitive touchscreen for efficient quality control. The device delivers repeatable results across standard workshop tasks and can be ordered directly via Metav Werkzeuge or discussed with their consultants for application advice. Microtech Metrology Thickness Gauge — Wireless + 1.54" colour touchscreen The Microtech Metrology Thickness Gauge is a compact digital instrument for shop-floor and laboratory thickness measurement, suitable for production control and component inspection. Wireless and USB data output Colour 1.54" touchscreen display Accuracy ±0.05 mm for dependable results Measuring range 0–150 mm Faster data capture for modern workflows The instrument combines Wireless transmission and USB connectivity to streamline data logging and reduce transcription errors during inspection routines. With a 1.54" colour touchscreen, the operator can set measurement modes and review results at a glance, which shortens cycle times in repetitive checks. The 0.0001 mm reading precision supports fine differentiation between nominal values, while the device’s digital interface enables straightforward export to quality-management systems for traceable records. Precise, repeatable measurements for everyday use Built for standard industrial tasks, this gauge provides ±0.05 mm accuracy, making it suitable for production control in metalworking and component assembly. The 0–150 mm measuring range covers typical workshop requirements without compromising stiffness or handling. Thanks to its measuring depth of 400 mm, larger or recessed sections can be accessed without special fixtures, improving measurement throughput for medium-sized parts. Ergonomic operation that reduces user error The instrument’s touchscreen and clear digital readout minimise interpretation mistakes that occur with analogue scales. An ergonomic design reduces handling fatigue during series inspection; combined with wireless data transfer the overall workflow becomes less dependent on manual note-taking. The result is a measurable gain in inspection reliability and operator comfort, which benefits both small workshops and larger manufacturing teams. Integration and quality assurance made straightforward As a digital measuring device, the gauge supports direct data capture into inspection logs, enabling rapid statistical evaluation and process control. The combination of Wireless and USB outputs facilitates integration with laboratory software, while the precise readout helps maintain consistent tolerances across production batches. For procurement and rollout, Metav Werkzeuge provides application support and product supply tailored to industrial needs. Contact Metav Werkzeuge for tailored advice and supply of the Microtech Metrology thickness gauge with Wireless and USB data logging — Metav Werkzeuge in Emmerich can advise on compatibility with existing QC systems and arrange delivery to the workshop Technical data Article number: 137150407 GTIN: 4061905460005 Manufacturer: Microtech Metrology Digital: yes Display: Colour 1.54" touchscreen Data output: Wireless + USB Facts Measuring range: 0–150 mm Accuracy: ±0.05 mm Reading: 0.0001 mm Measuring depth: 400 mm Measuring faces: 10 mm Special features Digital thickness measuring instrument Colour touchscreen for quick operation Wireless transmission for direct logging USB connection for data export FAQ What measuring range does the gauge cover? The Microtech Metrology thickness gauge covers a measuring range of 0–150 mm, suitable for standard workshop and laboratory tasks. What accuracy and resolution can be expected? The device provides an accuracy of ±0.05 mm with a reading resolution of 0.0001 mm, delivering reliable results for production control. How are measurement results transferred to a PC or QA system? Results can be sent via Wireless transmission or exported using the USB connection for direct integration into quality-management software. Is the instrument suitable for larger recessed measurements? Yes — the gauge has a measuring depth of 400 mm, allowing access to deeper sections without special fixtures. Which interface is used for operation and settings? Operation is handled through a 1.54" colour touchscreen, which simplifies mode selection and on-device review of results. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Thickness Gauge With Colour Touchscreen, Wireless USB Output, 0.07mm Accuracy - Microtech Metrology
Benefit from a compact, reliable instrument that combines a 0–150 mm measuring range, 0.07 mm stated accuracy and flexible Wireless + USB data output for efficient inspection workflows; order directly via Metav Werkzeuge or consult their specialists for specification matching. Microtech Metrology Thickness Gauge — 0–150 mm, Wireless + USB The Thickness Gauge from Microtech Metrology is a digital measuring instrument designed for rapid thickness checks of sheets, panels and components in workshop and quality‑control environments. Colour 1.54" touchscreen display 0–150 mm measuring range Wireless and USB data output 0.07 mm stated accuracy Precision that supports repeatable inspection results The instrument brings measurable consistency to routine checks by combining a 0–150 mm measuring range with a stated accuracy of 0.07 mm and a fine display resolution of 0.0001. The technical arrangement with ten measuring faces and a measuring depth of 800 mm reduces handling error for medium‑sized workpieces, so that batch inspections become faster and more reproducible. For shopfloor use, the compact digital design shortens cycle times while keeping measurement uncertainty transparent. Data handling that integrates with production systems Built to reduce administrative overhead, this gauge provides Wireless and USB data output channels and a colour 1.54" touchscreen for on‑device configuration. These interfaces enable straightforward logging of measurement series into SPC workflows or a measurement database, helping to accelerate traceability and decision making. The instrument’s digital output options make it compatible with common data collection setups, improving throughput without adding manual transcription steps. Robust operation and intuitive everyday use The digital construction and ergonomic layout support reliable performance under workshop conditions. The multi‑face measuring arrangement and the 800 mm measuring depth make the gauge suitable for a wide range of panel and component geometries, while the touchscreen display simplifies mode selection and readout. Supplied as a ready‑to‑use measuring solution, the instrument is intended for consistent routine checks in quality control, incoming inspection and production sampling. Contact Metav Werkzeuge for tailored advice and to arrange supply of the Microtech Metrology thickness gauge with Wireless and USB connectivity Technical Data Article number: 137150807 GTIN: 4061905460012 Manufacturer: Microtech Metrology eClass: 21170535 Core specifications Measuring range: 0–150 mm Measuring depth: 800 mm Accuracy: 0.07 mm Resolution (display): 0.0001 Display size: 1.54" Measuring faces: 10 Features and interfaces Digital instrument Wireless and USB data output Colour 1.54" touchscreen Category: Dial gauges SKU: 137150807 FAQ What measuring range and accuracy does the gauge offer? The Microtech Metrology thickness gauge covers 0–150 mm with a stated accuracy of 0.07 mm and a display resolution of 0.0001 for fine readouts. How can measurement data be exported from the instrument? Data can be exported via the gauge’s Wireless connection or through USB for direct transfer into production or quality systems. For which applications is this instrument best suited? The gauge is intended for sheet and panel thickness checks, component inspection and routine quality control tasks where medium‑range measurements and digital data capture are required. What does the touchscreen add to daily operation? The colour 1.54" touchscreen speeds up mode selection and makes on‑site configuration intuitive, reducing operator time per measurement. Is the instrument suitable for workshop use? Yes. The digital construction, ten measuring faces and 800 mm measuring depth are designed to cope with regular shopfloor inspection routines. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150–300mm Thickness Gauge Colour Touchscreen, Wireless/USB Data Output, 800mm Depth - Microtech Metrology
Take advantage of colour touchscreen operation and wireless + USB data output combined with a generous 150–300 mm measurement range for consistent thickness control in routine quality assurance; order the instrument directly via Metav Werkzeuge or ask our consultants if needed. Thickness Gauge — Microtech Metrology digital instrument with colour touchscreen and Wireless + USB A Thickness Gauge designed for industrial workshop use, offering digital readout and a 150–300 mm measurement range suited to standard machine‑shop and metalworking inspection tasks Colour 1.54" touchscreen display Wireless and USB data output Measurement range 150–300 mm 800 mm measuring depth Reliable measurement for everyday QA The instrument is built for repeatable thickness checks across typical workshop components. Featuring a colour 1.54" touchscreen, the unit simplifies setting selection and result review, reducing operator time per measurement. With a declared accuracy of 0.085 mm and a clear digital readout, the device supports routine acceptance testing and incoming inspection, providing a predictable baseline for production control. Its 150–300 mm measurement span places it in the standard range for general machine‑tooling tasks, balancing reach and stiffness for one‑hand handling in the shop. Precision where access matters The gauge delivers a practical combination of range and penetration: the 800 mm measuring depth enables inspection of recessed or stepped components while maintaining consistent contact geometry. The instrument’s measuring faces (10) are dimensioned to provide stable seating on varied surfaces, helping to minimise tilt‑related error during thickness checks. Explained plainly: deeper measuring capability reduces the need for repositioning to reach internal features, saving cycle time and reducing handling‑induced variability in series inspections. Seamless data capture and traceability Data export via Wireless and USB connectors supports direct logging into inspection software and traceable batch records. This integration shortens post‑measurement workflows and reduces transcription errors compared with manual entry. The digital output, combined with a responsive colour touchscreen, enables straightforward export of measurement series for SPC or quality documentation—an operational advantage when process evidence or audit trails are required. Robust usability for industrial environments Designed as a workshop workhorse, the instrument combines tactile screen control with digital electronics for stable readback under frequent use. The construction emphasises repeatability: the digital readout and consistent contact geometry reduce subjective interpretation, while the overall layout supports quick measurements on medium‑sized parts typical in metal fabrication and assembly. For procurement teams seeking a pragmatic thickness solution, the balance of digital convenience, data connectivity and a practical measuring range makes this device an efficient choice. Contact Metav Werkzeuge today for a specification review and tailored delivery from Emmerich — our consultants will advise on integrating the Microtech Metrology thickness gauge into existing inspection workflows Technical data Article number: 137300807 GTIN: 4061905460036 Manufacturer: Microtech Metrology Facts Measurement range: 150–300 mm Measuring depth: 800 mm Accuracy: 0.085 mm Reading resolution: 0.0001 Display: Colour 1.54" touchscreen Data output: Wireless + USB Special features Digital instrument for thickness measurement Ten measuring faces Category: Messuhren (measuring instruments) Suitable for workshop quality control and inspection FAQ What measurement range does the instrument cover? The instrument covers a measurement range of 150–300 mm, suitable for standard machine‑shop components and general inspection tasks. How is measurement data exported from the unit? Measurement data can be exported via Wireless or USB connections; the Microtech Metrology thickness gauge supports direct transfer for traceability and SPC workflows. What level of precision can be expected from this instrument? The device is specified with an accuracy of 0.085 mm, providing consistent numeric readouts for routine quality checks and production control. Can the gauge inspect deep or recessed features? Yes, with a measuring depth of 800 mm the gauge allows access to recessed surfaces and stepped parts that would otherwise require repositioning. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1mm Thickness Gauge Digital Indicator, 6.35mm Measuring Faces, 25mm Depth, ISO 17025 Calibrated - Microtech Metrology
Certified ISO 17025 calibration together with a digital readout and 0.003 mm accuracy ensure traceable results and reliable production control; take advantage of these features and order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Thickness Gauge with Digital Dial Indicator — ISO 17025 calibrated, 0–1 mm range The Thickness Gauge with Digital Dial Indicator is a compact measurement instrument designed for precise thickness checks in quality control, fine mechanical workshops and metrology labs. ISO 17025 calibration certificate included 0.003 mm accuracy for laboratory use 0–1 mm measuring range for micro work 0.001 mm digital resolution Precision where micrometrology counts This instrument delivers 0.003 mm accuracy with a 0.001 mm resolution, making it suitable for high‑precision thickness checks in routine laboratory tasks and production sampling. The digital indicator provides an unambiguous numeric display that speeds up recording and reduces interpretation errors compared with analogue dials. For standardised inspection processes, these characteristics translate into faster decision cycles and fewer disputed measurements. Traceable calibration for quality systems Delivered with an ISO 17025 calibration certificate, the gauge enters the quality workflow ready for use in accredited environments. The included calibration certificate documents traceability to national standards and simplifies integration into inspection plans and audits. For procurement and QA managers, the certified status reduces internal calibration workload and supports consistent compliance with inspection protocols. Compact format for fine and confined measurements With a measuring range of 0–1 mm, 6.35 mm measuring faces and a 25 mm measuring depth, this gauge targets extremely fine thickness assessments and narrow test points. Its compact footprint is optimised for applications such as thin foils, shims and precision components where access and minimal probe deflection are critical. The design balances rigidity and reach so that repeatability and precision remain high even on small workpieces. Practical use and integration in the workshop As a digital measuring instrument it suits both bench use and integration into routine QA checks. The clear numeric output and repeatable mechanical contact make it well suited for tabulated measurement procedures and short series control. For users uncertain about specific applications, Metav Werkzeuge offers technical guidance to match the instrument’s capabilities to the measuring task and to advise on suitable fixturing or handling practices. For certified precision from Microtech Metrology, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply. Technical Data Article number: 137001028 GTIN: 4061905044267 Manufacturer: Microtech Metrology Core specifications Measuring range: 0–1 mm Resolution: 0.001 mm Accuracy: 0.003 mm Measuring faces: 6.35 mm Measuring depth: 25 mm Special features Digital indicator ISO 17025 calibration certificate included Category: Dial indicators SKU: 137001028 FAQ Is the instrument supplied with a calibration certificate? Yes. The thickness gauge is delivered with an ISO 17025 calibration certificate, confirming traceability and suitability for accredited measurement procedures. What is the smallest increment visible on the display? The digital display shows measurements to 0.001 mm, providing fine resolution for detailed thickness assessments. What measurement tasks is this gauge best suited to? The instrument is optimised for micro measurements such as thin foils, shims and precision parts where a 0–1 mm range and minimal contact diameter are required. Can the gauge be used for series inspection in a production environment? Yes. The combination of digital readout and documented calibration makes the gauge appropriate for routine quality control and sampling tasks. Which standards support the calibration of this instrument? Calibration is performed and documented to ISO 17025, ensuring traceability to recognised national standards. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Ultrasonic Thickness Gauge Magnetic Probe, LCD Backlight, IP65 - Filetta
Take advantage of the combination of a wide 1.5–200 mm measuring range, 0.01 mm reading resolution and a rugged IP65 rating for reliable thickness control across mixed-metal production. Order the instrument directly via Metav Werkzeuge or consult Metav's specialists for application advice. MS910.480 Ultrasonic Thickness Gauge — Filetta digital gauge with 1.5–200 mm range & 0.01 mm resolution The MS910.480 Ultrasonic Thickness Gauge is a digital, workshop‑ready instrument for fast, non‑destructive thickness measurement on a variety of metals and assemblies Digital measurement, 1.5–200 mm range 0.01 mm reading resolution IP65 protection for workshop use Includes calibration block and USB cable Broad range for mixed‑metal production and maintenance With a measurement window of 1.5–200 mm, this ultrasonic gauge addresses both thin‑wall inspections and substantially thicker components without the need to change instruments. The 0.01 mm reading resolution supports precise thickness logging while the ultrasonic, time‑of‑flight principle enables non‑destructive checks on finished parts and installations. Suitability for steel, cast iron, aluminium, copper and brass makes the instrument a practical choice where varied material mixes are processed or maintained, eliminating guesswork when switching between alloys. Stable readings and durability for repeatable quality control A magnetic transducer face provides reliable contact on ferrous components, improving coupling and reducing measurement scatter during handheld use. The illuminated LCD with backlight keeps data legible in poorly lit workshops, and the IP65 enclosure rating protects the electronics from dust ingress and water jets encountered on the shop floor. Combined, these characteristics yield fast, repeatable measurements that integrate with routine quality checks and in‑line maintenance procedures. Traceable results and ready‑to‑use delivery for inspection workflows Delivered complete with a calibration block and a werkmessprotokoll (test report), the instrument supports traceability and immediate inclusion in quality documentation. The package also contains a USB cable, power adapter and a standard transducer, while 2x Li 18650 batteries (included) ensure mobility. The operating temperature span of -20°C to 50°C accommodates cold stores and heated production areas alike, so calibration and field verification can be carried out wherever required without extra tooling. For reliable thickness measurement with Filetta accuracy, contact Metav Werkzeuge in Emmerich for tailored advice or to place an order via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS910.480 Manufacturer: Filetta Design: Digital Measurement range: 1.5–200 mm Resolution / reading: 0.01 mm Accuracy: 0.01 Protection class: IP65 Operating temperature: -20°C to 50°C Display: LCD with backlight Power: 2x Li 18650 batteries (included) Accessories: USB cable; power adapter; calibration block; test report; standard transducer Special feature: magnetic transducer face Suitable materials: steel; cast iron; aluminium; copper; brass Facts Measurement principle: ultrasonic time‑of‑flight Weight: see manufacturer data SKU: MS910.480 Special features Ready for workshop use Traceable calibration with test report Portable, battery‑powered operation Robust casing for industrial environments FAQ What measurement range does the MS910.480 cover? The MS910.480 ultrasonic thickness gauge measures from 1.5 mm up to 200 mm, enabling inspections from thin sheets to substantial metal parts. Which materials can be measured with this gauge? The instrument is suitable for steel, cast iron, aluminium, copper (natural copper) and brass, as stated in the product specification. Is the device delivered calibrated and with documentation? Yes, the supplied package includes a calibration block and a werkmessprotokoll (test report) to support traceability in inspection records. How is the MS910.480 powered and what is included for data transfer? Power is provided by 2x Li 18650 batteries (included) and data transfer is possible via the supplied USB cable. Can the gauge be used in harsh workshop conditions? The unit has an IP65 rating and an operating temperature range of -20°C to 50°C, making it robust for many industrial environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
20mm Thickness Gauge Digital Indicator, 120mm Depth, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high-resolution measurement, robust repeatability and traceable calibration to maintain consistent quality control. The combination of 0–20 mm range, 0.001 mm resolution and an ISO 17025 calibration certificate supports reliable inspection processes. Order the instrument directly via Metav Werkzeuge or request advice from our measurement consultants. Thickness gauge — digital dial instrument, 0–20 mm, Microtech Metrology A compact thickness gauge with a digital dial indicator, designed for precise measurement of small components in workshop and laboratory environments. Digital dial indicator, 0.001 mm resolution Measurement range 0–20 mm, measuring depth 120 mm Accuracy ±0.015 mm for repeatable results Supplied calibrated with ISO 17025 certificate Precise measurement for small-part inspection For tasks that demand fine tolerance control, this digital instrument delivers sub-micron resolution alongside stable repeatability. The combination of a 0.001 mm display step and a stated accuracy of ±0.015 mm makes it suitable for detailed thickness checks on thin sheets, foils and small machined parts. The compact design and shallow measuring range classify it as a micro‑range device, optimised for applications where short measuring faces and minimal deflection improve the reliability of each reading. Efficient process integration and straightforward results Integration into quality routines is supported by a clear digital dial indicator that reduces reading errors and speeds up inspection cycles. The measuring depth of 120 mm allows access to recessed features while retaining instrument rigidity, meaning fewer repeat measurements and less downtime. Measurable outcomes – faster checks and fewer reworks – translate into a lower overall inspection burden and a smoother production flow. Traceable calibration and documented accuracy Delivered with an ISO 17025 calibration certificate, the instrument ensures traceability and audit readiness for regulated or certified workflows. The calibration documentation certifies that measurements comply with defined uncertainty limits and supports quality management systems. For procurement decisions in production and testing environments, the presence of an ISO 17025 certificate removes ambiguity about the instrument’s baseline performance. Built for workshop reliability with clear technical benefits Constructed for daily use, the instrument combines a robust measuring head with easy-to-read electronics, reducing operator influence on results. The short measuring faces and solid contact geometry are suited to fine mechanical parts and measurement tasks that benefit from a compact gauge. Practical advantages include consistent repeatability, reduced handling uncertainty and a format that complements existing bench and handheld inspection tools. Select the ISO 17025‑calibrated Microtech Metrology thickness gauge for validated precision and contact Metav Werkzeuge for ordering or specialist advice on application and integration Technical Data SKU: 137020128 GTIN: 4061905045561 Manufacturer: Microtech Metrology ECLASS: 21170535 Digital display: yes Calibration: ISO 17025 certificate included Facts Measurement range: 0–20 mm Resolution (display): 0.001 mm Specified accuracy: ±0.015 mm Measuring depth: 120 mm Measuring face diameter: 10 mm Special features Digital dial indicator for rapid readings Supplied with ISO 17025 calibration certificate Category: Dial gauges / Measuring instruments Intended for fine workshop and laboratory inspection FAQ What measurement range does the gauge cover? The gauge covers a 0–20 mm range, suitable for small-part thickness checks and fine mechanical measurements. Is a calibration certificate included with the instrument? Yes, the instrument from Microtech Metrology is delivered with an ISO 17025 calibration certificate, confirming traceable accuracy. What resolution and accuracy can be expected during regular use? The digital dial provides 0.001 mm resolution with a stated accuracy of ±0.015 mm, offering reliable repeatability for standard inspection tasks. Can the gauge reach recessed features or deeper pockets? With a measuring depth of 120 mm, the instrument can access many recessed geometries while maintaining measurement stability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20mm Thickness Gauge Digital With Wireless USB, 0.0001mm Resolution, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the ISO 17025 calibration, precise 0.014 mm measurement performance and versatile Wireless + USB data transfer to streamline in‑house quality checks; order the instrument via Metav Werkzeuge or request further specification details from our consultants. Microtech Metrology Digital Thickness Gauge — Wireless + USB, ISO 17025 calibrated A digital thickness gauge for precision workshop and laboratory use, offering traceable calibration and data export for quality control workflows. *ISO 17025 calibration included *Wireless and USB data output *Digital display with 0.014 mm accuracy *Measuring range 0–20 mm, 120 mm depth Accurate readings that reduce rework and accelerate inspection The instrument delivers a repeatable 0.014 mm accuracy on a digital display, providing a reliable numeric basis for pass/fail decisions in production and inspection. Built as a compact measuring device in the micro range (max. 10–100 mm), it combines fine resolution with a robust measuring depth, so small components and thin sheets can be checked without frequent repositioning. The supplied ISO 17025 calibration certificate documents traceability and supports formal quality records, which simplifies audit preparation and reduces uncertainty in tolerance-critical processes. Seamless data handling for error‑free documentation Equipped with Wireless and USB data outputs, the gauge allows direct transfer of readings into inspection software and spreadsheets, eliminating manual transcription errors and speeding up batch documentation. The digital interface supports fast sampling of successive measurements and straightforward integration into measurement routines. The combination of electronic readout and secure data export is particularly beneficial for serial inspection tasks where consistency and traceable records are required. Tailored for small-scale precision tasks and deeper features Classified in the micro measurement class, this device is especially suited to fine mechanical work such as small parts, thin material checks and micro‑components in toolmaking or precision assembly. The 120 mm measuring depth extends accessibility to recessed or stepped features that are otherwise difficult to reach with short‑travel gauges. Compact dimensions and a clear display promote efficient handling in a busy workshop environment while maintaining the stiffness and stability demanded for reproducible results. Delivered calibrated with traceable documentation This digital instrument is supplied fully calibrated to ISO 17025, and a calibration certificate is included with the delivery. That certification confirms that the calibration has been performed against accredited standards and that the delivered measurement uncertainty is documented. Such traceability supports contractual testing regimes and internal quality assurance, giving confidence that inspection data from this Microtech Metrology device are both comparable and defendable. Contact Metav Werkzeuge for a detailed specification sheet or to request this ISO 17025‑calibrated Microtech Metrology thickness gauge for integration into inspection workflows Technical data Article number: 137020127 GTIN: 4061905045578 Manufacturer: Microtech Metrology Digital: yes Data output: Wireless+USB ISO 17025 calibration: yes Core data Accuracy: 0.014 mm Resolution: 0.0001 mm Measuring range: 0–20 mm Measuring depth: 120 mm Measuring faces: 10 Features Digital display Wireless data transfer USB data transfer Supplied with calibration certificate eClass: 21170535 FAQ What calibration is supplied with the gauge? The instrument is supplied fully calibrated to ISO 17025 and includes a traceable calibration certificate for the Microtech Metrology digital thickness gauge (SKU 137020127). Can measurement data be exported to a computer? Yes, readings can be exported via the built‑in Wireless interface or directly over USB for integration into inspection software and documentation. What range of thicknesses can be measured? The device covers a measuring range from 0 to 20 mm and is optimised for micro‑scale inspection tasks. Is the instrument suitable for checking recessed features? The 120 mm measuring depth allows inspection of deeper or stepped features that are not reachable with short‑travel gauges. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3–200 mm Straight High-Temperature Ultrasonic Thickness Probe 5 MHz, Ø14 mm, Cable ~1 m - Metav IndustryLine
Take advantage of a heat‑resistant design, a broad 3–200 mm measurement range and a compact Ø14 mm footprint for dependable thickness checks on hot components; order the probe directly via Metav Werkzeuge or contact the consultants for application advice. Probe for Ultrasonic Thickness Gauge M502.414 – heat‑resistant, 5 MHz, Ø14 mm (Metav IndustryLine) The Probe for Ultrasonic Thickness Gauge M502.414 is a straight, heat‑resistant 5 MHz transducer intended for thickness testing of components from 3 to 200 mm in industrial environments Heat‑resistant up to 300°C Measurement range 3–200 mm 5 MHz frequency for general thickness testing 14 mm probe diameter, straight design Built for high‑temperature industrial measurement The straight probe is specified as heat‑resistant up to 300°C, making it suitable for inspections where elevated surface temperatures rule out standard transducers. The construction supports reliable coupling over short contact times, while the compact Ø14 mm face aids access in confined areas. This configuration reduces the need for cooling pauses during production checks and therefore contributes to uninterrupted quality control in heat‑affected processes. Reliable readings across a wide measurement band Designed around a 5 MHz element, the transducer provides a pragmatic balance between penetration and resolution for wall‑thicknesses from 3–200 mm. For workshop and shop‑floor applications this means one sensor can cover a broad set of tasks without frequent probe changes. The result is efficient inspection cycles and consistent comparative data for acceptance tests and maintenance rounds, supporting reproducible measurement routines in metalworking and fabrication contexts. Compatibility and handling that keep inspections efficient A robust cable of approximately 1 m and the specified connector support straightforward attachment to compatible ultrasonic thickness gauges. The straight geometry and small probe face simplify positioning on curved or limited surfaces, shortening set‑up times. Classified in the Standard class for thickness gauges, this transducer is a practical choice where stiffness, reach and one‑hand operation need to be balanced for everyday measurements. For precision high‑temperature thickness testing with the Metav IndustryLine M502.414 probe, contact Metav Werkzeuge for tailored advice and expedited delivery from Emmerich. Technical data Article number: M502.414 GTIN: 4054469162614 Manufacturer: Metav IndustryLine Facts Frequency: 5 MHz Measurement range: 3–200 mm Probe diameter: Ø14 mm Cable length: approx. 1 m Connector: 15 Weight: 2 kg Tariff number: 90179000 Special features Heat‑resistant <300°C Straight probe design Suitable for ultrasonic thickness gauges Minimum requirement: >Ø30x3 Label: Sonde für Ultraschall‑Dickenmessgerät Hitzebeständig 3 - 200 mm FAQ What temperature can the probe withstand? The probe is specified as heat‑resistant up to 300°C, allowing the M502.414 to be used on hot surfaces without premature degradation. Which thicknesses can be measured with this transducer? The transducer covers a measurement range of 3–200 mm, making it suitable for thin sheets through to moderate‑thickness structural parts. What frequency does the probe use and what does that mean? The probe operates at 5 MHz, offering a compromise between penetration and resolution that matches common workshop inspection tasks. What is the probe face diameter and why does it matter? The probe has a 14 mm face (Ø14 mm); a small contact area improves access to tight features and curved surfaces. Is the probe compatible with standard ultrasonic thickness gauges? Yes; the M502.414 is intended for use with ultrasonic thickness gauges and includes a 1 m cable and the specified connector for straightforward integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Thickness Gauge Digital Indicator Depth 800mm ISO 17025 Calibrated - Microtech Metrology
Taking advantage of ISO 17025 traceable calibration, a fine display resolution and a compact measuring range, this instrument delivers reliable thickness control for production and inspection workflows; order directly via Metav Werkzeuge or consult our specialists for application matching. Thickness Gauge with Digital Indicator (0–50 mm) — Microtech Metrology The Thickness Gauge is a compact, ISO‑calibrated digital measuring instrument designed for precise thickness checks in workshops and laboratories. ISO 17025 calibrated delivery certificate Measuring range 0–50 mm Readout resolution 0.001 mm Measuring faces Ø10 mm Consistent measurement performance for production control Built for repeatable checks, this instrument combines a digital indicator with a fine display step of 0.001 mm, allowing detailed readouts that support fast decision‑making on the shop floor. The specified nominal accuracy of ±0.04 mm provides an objective tolerance framework for quality control; paired with regular calibration, the result is a measurement routine that reduces rejects and rework. The digital display simplifies data reading and shortens inspection cycles, which improves throughput without sacrificing documented reliability. Compact form that fits fine mechanical applications With a measuring range of 0–50 mm, the tool falls into the micro class for compact calipers and gauges, making it suitable for fine mechanical components where stiffness and short jaws help avoid deformation. The measuring faces Ø10 mm give a defined contact area for consistent pressure distribution, while the long reach — measuring depth 800 mm — facilitates measurements on parts requiring deeper access than typical bench gauges. The compact footprint and ergonomic handling reduce operator fatigue during repetitive tasks and maintain measurement stability for small parts production. Calibrated delivery and documentation for audits The instrument is supplied fully calibrated under ISO 17025, and a calibration certificate is included with delivery, ensuring traceable calibration for internal audits and supplier control records. This certified status streamlines quality assurance processes, minimises administrative follow‑up and demonstrates conformity to external inspection requirements. The combination of documented calibration and clear numerical performance specifications supports procurement decisions where auditability and documented accuracy are mandatory. Contact Metav Werkzeuge for a technical match and request the included ISO 17025 calibration certificate to ensure this Microtech Metrology thickness gauge suits the application Technical Data Article number: 137050808 GTIN: 4061905045332 Manufacturer: Microtech Metrology Digital: yes ISO 17025: yes Numbers / Core technical data Measuring range: 0–50 mm Resolution: 0.001 mm Nominal accuracy: ±0.04 mm Measuring faces diameter: 10 mm Measuring depth: 800 mm Special features / Versions Digital indicator readout Supplied with ISO 17025 calibration certificate Category: Dial gauges / measuring instruments Compact micro class suitable for fine mechanical parts FAQ What is the display resolution of this gauge? The display resolution is 0.001 mm, allowing fine incremental readings on the digital indicator. Is the instrument delivered calibrated? Yes, the gauge is supplied fully calibrated under ISO 17025 and includes the calibration certificate with delivery. What measurement range does the instrument cover? The measuring range is 0–50 mm, classifying it in the micro segment for compact precision tasks. Can this gauge be used for small, delicate components? The compact design, measuring faces Ø10 mm and micro classification make the gauge suitable for fine mechanical and delicate parts inspection. What accuracy can be expected during routine checks? Routine measurements should be considered against the nominal accuracy of ±0.04 mm, with traceable calibration ensuring results are auditable. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thickness Gauge Digital Indicator, 0.001mm Resolution, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of traceable calibration, ultra-fine display resolution and a 300 mm probe depth facilitates precise thickness control across production and inspection tasks; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Thickness Gauge — Microtech Metrology | 0–50 mm, 0.001 mm resolution The Digital Thickness Gauge is a compact measuring instrument for precise thickness checks in workshop environments and quality control, offering a digital display for fast, repeatable readings across small and medium-sized components. 0–50 mm measuring range 0.001 mm display resolution ISO 17025 calibrated with certificate 300 mm probe depth for recessed parts Reliable measurement performance for quality assurance With a measuring range of 0–50 mm and a display resolution of 0.001 mm, the instrument delivers measurement detail that supports tight tolerance control and rapid decision-making on the shopfloor. The specified accuracy of 0.025 mm gives a clear technical yardstick for inspection plans and reduction of scrap rates. The digital display speeds up read‑out and reduces transcription errors compared with analogue alternatives, which translates into measurable productivity gains during batch inspections and incoming‑goods checks. Practical design for workshop integration and versatile use A probe reach of 300 mm and 10 mm measuring faces provide access to recessed or awkwardly positioned test points, making the tool suitable for components, panels and assemblies where conventional gauges cannot reach. The compact form factor supports single‑handed operation and quick repositioning between measurement points, helping maintain throughput without compromising measurement repeatability. Where traceable documentation is required, the combination of digital read‑out and rugged probe geometry simplifies routine checks and reduces operator setup time. Traceable calibration and documentation for audits Delivered fully calibrated to ISO 17025 with a calibration certificate included, the gauge ensures measurement traceability for internal quality systems and external audits. The Microtech Metrology provenance indicates a focus on metrological competence and enables consistent reporting across inspection routines. This traceability supports supplier qualification and regulatory compliance tasks and allows the device to be integrated into formal quality records with confidence. Choose Microtech Metrology’s Digital Thickness Gauge for traceable, workshop‑ready measurement — contact Metav Werkzeuge in Emmerich for tailored technical advice and quick supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 137050308 GTIN: 4061905043994 Manufacturer: Microtech Metrology Category: Dial gauges Facts Measuring range: 0–50 mm Resolution (display): 0.001 mm Accuracy: 0.025 mm Measuring faces: 10 mm Measuring depth: 300 mm Digital: yes Special features ISO 17025 calibration certificate included Compact design for workshop use Suitable for production and laboratory inspection Microtech Metrology brand FAQ What measuring range does the gauge cover? The Digital Thickness Gauge covers a measuring range of 0–50 mm, suitable for small to medium components. What resolution and accuracy can be expected? Readings are delivered at a resolution of 0.001 mm with an accuracy rating of 0.025 mm, which supports fine tolerance checks. Is the instrument delivered calibrated? Yes; the gauge is supplied with an ISO 17025 calibration and an accompanying certificate for traceability. Can recessed parts be measured with this instrument? The 300 mm probe depth and 10 mm measuring faces allow access to recessed and awkwardly positioned surfaces for reliable thickness checks. Who manufactures this gauge and what is the SKU? The gauge is produced by Microtech Metrology and listed as SKU 137050308 Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thickness Gauge Digital Wireless USB, 0.0001mm Resolution, ISO 17025 Calibrated - Microtech Metrology
High-resolution measurement, reliable data transfer and ISO 17025 traceability make this instrument a practical choice for demanding quality-control workflows; benefit from a 0.0001 mm readout, Wireless + USB data output and a supplied calibration certificate. Order directly via Metav Werkzeuge or contact our consultants for specification advice. Thickness Gauge with Microcomputer — Digital, Wireless+USB (Microtech Metrology) The thickness gauge with microcomputer is a digital measuring instrument designed for precise material-thickness checks in laboratory and production inspection environments. *Digital readout with 0.0001 mm resolution *Wireless and USB data output *ISO 17025 calibrated with certificate *50 mm measuring range, 300 mm measuring depth Precision and traceability tailored to quality control High-frequency production and laboratory testing require both fine resolution and documented traceability. The instrument delivers a 0.0001 mm display increment together with an assessed accuracy of ±0.021 mm, which supports more consistent pass/fail decisions than coarser indicators. The combination of fine resolution and documented measurement uncertainty reduces rework and scrap, and the supplied calibration certificate demonstrates that readings can be traced to national standards, simplifying audit preparation and long-term quality records. Faster, error‑resistant data capture for process integration Integrated Wireless and USB outputs, controlled by the built-in microcomputer, enable direct transfer of measured values into inspection logs and statistical software. Automated data export removes manual transcription, accelerates batch reporting and lowers the risk of logging errors; this improves throughput in busy metrology stations. Compatibility with common data‑logging workflows means the device functions as both an immediate measuring tool and a consistent source of digital measurement data for process control. Practical design for workshop and laboratory use The instrument covers a 0–50 mm measuring range while offering a 300 mm measuring depth for access to recessed areas and fixtures; contact faces 10 mm support repeatable seating on flat or contoured samples. The digital construction and compact control electronics make the unit robust enough for shop‑floor handling while remaining suitable for detailed laboratory tasks. Delivered fully calibrated to ISO 17025, the instrument arrives ready for immediate use with full documentation, supporting rapid integration into existing quality systems supplied by Microtech Metrology. Contact Metav Werkzeuge for procurement and technical advice on Microtech Metrology thickness gauges; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 137050307 GTIN: 4061905044007 Manufacturer: Microtech Metrology Core specifications Measuring range: 0–50 mm Resolution (display): 0.0001 mm Accuracy: ±0.021 mm Measuring depth: 300 mm Contact faces: 10 mm Special features Data output: Wireless + USB Delivered calibrated to ISO 17025 with calibration certificate Microcomputer-controlled digital readout Digital instrument suitable for laboratory and shop use FAQ What resolution and accuracy does the instrument provide? The thickness gauge with microcomputer offers a resolution of 0.0001 mm and an assessed accuracy of ±0.021 mm, suitable for stringent inspection tasks. Is the instrument supplied with official calibration documentation? Yes. The Microtech Metrology thickness gauge is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceability. How can measurement data be exported for analysis? Measurement values are exported via Wireless or USB interfaces, enabling direct capture into inspection software or data‑logging systems. What measurement range and access depth are available? The device covers 0–50 mm for thickness and provides a 300 mm measuring depth for reaching recessed measurement points. Is the unit suitable for both workshop and laboratory environments? The instrument is designed for shop‑floor robustness and laboratory accuracy, making it appropriate for production inspection and detailed quality control. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thickness Gauge Digital Wireless USB, ISO 17025 Calibrated, 0.0001mm Resolution - Microtech Metrology
The combination of high accuracy (0.045 mm), wireless + USB data output and delivery with an ISO 17025 calibration certificate ensures reliable, traceable thickness measurements for workshop and laboratory use. Order directly via Metav Werkzeuge or consult our specialists for application advice. Thickness Gauge – Digital Thickness Gauge by Microtech Metrology (Wireless + USB) The Thickness Gauge is a digital measuring instrument designed for precise thickness checks in workshops and inspection labs, covering a measuring range up to 50 mm and optimised for compact, repeatable measurements. High accuracy 0.045 mm Measurement range 0–50 mm Wireless and USB data output Supplied with ISO 17025 calibration Traceable results for quality control and process reliability This digital instrument delivers traceable measurement results, combining a declared accuracy of 0.045 mm with a fine display step of 0.0001 mm for clear readouts. The included ISO 17025 calibration certificate documents the instrument's conformity to international calibration standards and reduces administrative overhead during incoming inspection or internal audits. For production environments that require documented verification, the certified delivery removes the need for an immediate external calibration and speeds up qualification of tooling or incoming batches. Seamless data transfer to speed inspection workflows Equipped with Wireless + USB data output, the gauge simplifies data capture and logging during routine checks and small-batch inspections. Digital transmission reduces transcription errors and enables direct integration into inspection spreadsheets or measurement software, improving traceability and saving operator time. The combination of a stable wireless link and wired USB option supports both flexible shop-floor checks and desk-based documentation, enhancing throughput without compromising measurement integrity. Compact dimensions suited to fine and precision tasks With a measuring span limited to 0–50 mm, this device fits the micro class of gauges commonly used for fine mechanical and watchmaking tasks, model checks and small component series. The compact form factor is easy to position on small parts and remains torsion‑resistant during single‑handed operation, which helps maintain repeatable contact conditions and consistent results. The instrument is therefore particularly suited where handling space is restricted and high repeatability is required. Practical compliance and reduced setup time Delivered fully calibrated under ISO 17025, the gauge arrives ready for immediate use with a calibration certificate included. This saves set‑up time in controlled environments and provides confidence when the instrument is used for initial sample approvals or quality gate checks. The digital readout and standardised data interfaces ease integration into existing measurement routines, providing a pragmatic balance between usability and metrological rigour. Contact Metav Werkzeuge for tailored advice on application suitability or to secure the Microtech Metrology Thickness Gauge with ISO 17025 certification directly from our stock in Emmerich Technical Data Article number: 137050807 GTIN: 4061905045349 Manufacturer: Microtech Metrology Product: Thickness Gauge Facts Measurement range: 0–50 mm Accuracy: 0.045 mm Readability: 0.0001 mm Measuring depth: 800 mm Measuring faces: 10 Digital: yes Data output: Wireless + USB ECLASS: 21170535 Special features Supplied with ISO 17025 calibration certificate Compact design for micro-range measurements Suitable for workshop and laboratory use SKU: 137050807 FAQ What measuring range does the gauge cover? The Microtech Metrology Thickness Gauge covers a measuring range from 0 to 50 mm, making it suitable for fine mechanical and small-component inspections. Is a calibration certificate included with delivery? Yes, the device is supplied fully calibrated under ISO 17025 and includes the corresponding calibration certificate for traceable documentation. How are measurements exported from the instrument? Measurements can be transmitted wirelessly or via USB; the gauge supports both modes to integrate with inspection software or data logging systems. What level of accuracy can be expected in routine use? The instrument is specified with an accuracy of 0.045 mm and a display step of 0.0001 mm, providing reliable repeatability for standard workshop and laboratory checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
80mm Ultrasonic Thickness Gauge Probe 90° Angled 7 MHz Ø6mm Cable ~1m - Metav IndustryLine
Take advantage of precise readings in confined spaces thanks to the combination of an angled 90° head, a 7 MHz centre frequency and a compact Ø 6 mm contact face for reliable thickness control; order directly via Metav Werkzeuge or consult our specialists for application advice. Probe M502.413 — Angled 90° Ultrasonic Thickness Gauge Probe, 7 MHz, Ø 6 mm The Probe M502.413 is an angled ultrasonic transducer designed for fast and reliable wall-thickness measurements on curved or hard-to-reach surfaces, suitable for routine inspection and maintenance. Angled 90° probe head for tight access areas 7 MHz frequency for versatile thickness scanning Measurement range 0.75–80 mm 1 m cable with 8.5 connector Precision in confined or complex geometries The angled 90° head and compact Ø 6 mm contact face enable dependable readings where straight probes cannot reach, for example at weld toes, pipe bends or inside housing recesses. With a measurement range of 0.75–80 mm and a 7 MHz centre frequency, the transducer balances resolution and penetration so that thin coatings and moderate wall thicknesses can be measured without excessive signal loss. This combination reduces the need for repeated set‑ups and shortens inspection cycles, supporting efficient asset monitoring. Practical integration and dependable coupling Equipped with an approximately 1 m cable and an 8.5 connector, the transducer is prepared for straightforward connection to standard ultrasonic thickness gauges. The probe requires conventional couplant and a minimum test area consistent with the specification >Ø15×2, ensuring meaningful sound-path geometry for accurate readings. The compact construction and clear electrical interface help keep instrument setup time to a minimum and simplify transfers between inspection points. Built for routine inspection and maintenance regimes Designed as a workshop-ready inspection accessory, the transducer serves corrosion monitoring, plant maintenance and quality checks where repeatable results matter. The 7 MHz frequency delivers a practical compromise between resolution and penetration for a wide range of ferrous and non-ferrous components, enabling faster decision-making during preventive maintenance and reducing unplanned downtime. The small contact diameter also assists in measuring smaller features without sacrificing signal clarity. Supply reliability and trusted provenance Sourced under the Metav IndustryLine umbrella, this sensor benefits from Metav’s logistics and quality filter for the European market. The compact, application-focused design makes the transducer a straightforward upgrade for service teams that need reliable ultrasonic data without complex integration. Product traceability is supported via its SKU and GTIN for inventory and compliance workflows. For tailored advice on using the Metav IndustryLine probe in specific inspection scenarios or to request ordering guidance from Metav Werkzeuge, please contact our consultants in Emmerich. Technical data Article number: M502.413 GTIN: 4054469162584 ECLASS: 27272803 Brand: Metav IndustryLine Numbers / Core technical data Frequency: 7 MHz Measurement range: 0.75–80 mm Contact diameter: Ø 6 mm Cable length: approx. 1 m Connector: 8.5 Minimum test area indication: >Ø15×2 Commodity code: 90179000 Weight: 2 kg Designs / Special features Angled 90° probe head for restricted access Compact contact face for small radii and weld toes Prepared for use with ultrasonic thickness gauges Supplied as single probe, ready for connection FAQ What thickness range can be measured with this probe? The transducer supports a measurement range of 0.75–80 mm, allowing inspection of thin to moderate wall sections with a single sensor. Is the probe suitable for curved or small-diameter pipes? Yes. The angled 90° head and Ø 6 mm contact face are designed to access curved surfaces and smaller radii where straight probes are impractical. Which coupling medium should be used? Standard ultrasonic couplants are recommended to ensure consistent acoustic transmission; the probe operates with conventional coupling gels used in thickness measurement. Does the probe require a specific instrument connector? The transducer is supplied with an 8.5 connector and an approximately 1 m cable for direct connection to compatible ultrasonic thickness gauges. Are there limitations on minimum test area? Measurement reliability depends on sufficient sound-path geometry; the probe specification indicates a minimum test area of >Ø15×2 to achieve valid readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibrated Gauge Block, Calibrated Certificate Included - Filetta
Take advantage of a calibrated reference block that supports routine verification for both surface roughness and thickness instruments, combining immediate usability with measurable traceability; order the Filetta standard directly via Metav Werkzeuge or contact our consultants for application advice. Filetta Calibrated Reference Block MS909.398 — calibration standard for roughness and thickness checks a calibrated reference block designed as a verification standard for surface roughness and ultrasonic thickness measurement instruments, offering a clear reference for routine quality control Calibrated reference standard Suitable for roughness and thickness checks Filetta SKU MS909.398 Reliable verification that supports measurement consistency A calibrated reference block provides an objective comparison point for measurement instruments, improving measurement reliability across inspection routines. Supplied ready for use, this standard simplifies routine checks of surface and thickness instruments and reduces uncertain readings by offering a stable, known reference. The visible benefit for production and quality teams is fewer inconclusive measurements and a faster return to process stability after instrument verification. Compatible with workshop and laboratory routines This reference block is suitable for both workshop-level spot checks and lab-based verification procedures. Its design supports comparative checks against surface roughness testers and ultrasonic thickness gauges, enabling quick confirmation of instrument behaviour without complex setup. Where traceable references are required in incoming inspection or periodic calibration checks, a dedicated block like this becomes an efficient, low-effort tool in the quality toolkit. Practical advantages for quality management Integrating a dedicated calibration standard into a measurement routine streamlines documentation and audit trails. Regular use of a reference block helps to identify drift, wear or probe issues before they affect production parts, providing a clear rational case for preventive maintenance and reduced scrap. The measurable outcome is improved process control and a demonstrable basis for quality decisions during internal or external audits. Trust and supply backed by a specialist partner Metav’s role as a precision partner means access to a broad range of calibrated standards and measurement solutions. Combining this Filetta standard with Metav’s supply chain ensures prompt availability and consistent quality for workshop and industrial users. For teams seeking dependable verification without overcomplication, the standard forms part of a straightforward approach to keeping instruments validated and production dependable. Contact Metav Werkzeuge in Emmerich for advice and delivery of Filetta calibrated reference standards — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific instruments Technical data Article number: MS909.398 Manufacturer: Filetta Image file: MS909398-main.jpg Core data Category: Messgeräte / Rauheitsmessgerät / Ultrasonic thickness gauge Delivery state: Calibrated reference standard Special features Intended use: Reference for roughness and thickness checks Documentation: Calibration certificate included with delivery Brand: Filetta FAQ What is the primary purpose of this reference block? The Filetta calibrated reference block MS909.398 functions as a stable comparison standard for verifying the performance of surface roughness and ultrasonic thickness measurement instruments. Is the block delivered ready for verification work? Yes. The Filetta MS909.398 is supplied as a calibrated reference and is accompanied by a calibration certificate to document its status. Which instruments can be checked with this standard? Typical applications include verification of surface roughness testers and ultrasonic thickness gauges, where the block provides a known reference for comparative checks. How often should the reference block be used in routine checks? Frequency depends on process criticality; for production-critical measurements a quick verification at shift start or before a new batch is advisable to detect instrument drift early. How should the block be stored to preserve its reference condition? Store the block in a stable, dry environment free from contamination and avoid impacts; handle with care to preserve the reference surfaces and the validity of subsequent checks. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
F1 Probe 1m Cable Coating Thickness Gauge For Ferrous And Non‑Ferrous Substrates - Metav IndustryLine
Take advantage of precise, repeatable coating thickness readings on both ferrous and non‑ferrous substrates combined with flexible handling thanks to an approximate 1 m cable; order directly via Metav Werkzeuge or consult the specialists for application advice. Probe F1 — Coating thickness probe for ferrous and non‑ferrous substrates (Metav IndustryLine) The Probe F1 is a single‑sensor probe designed for use with coating thickness gauges to measure layers on magnetic bases and non‑magnetic coatings, offering reliable readings where coated surfaces are sufficiently large or thick for stable measurement. Ferrous and non‑ferrous compatible probe Approx. 1 m cable for flexible positioning Suitable for Ø ≥30 mm or coating >100 μm Robust construction for industrial use Consistent thickness measurement where it matters The probe delivers repeatable coating thickness readings on substrates that are magnetic (steel, iron, alloy, magnet) while evaluating non‑magnetic finish layers such as zinc, aluminium, chromium, copper, rubber and paint. By specifying the minimum measurement footprint (area ≥ Ø30 mm) and a minimum coating thickness (> 100 μm), the sensor avoids unstable readings on very small or ultra‑thin test areas, which translates into fewer re‑tests and a clearer quality record. The result is more efficient quality control and faster decision cycles in production or laboratory environments. Built for practical integration and reliable handling Equipped with an approx. 1 m cable, this probe gives technicians the freedom to position measurement equipment without awkward strain on the device, improving ergonomics during batch inspections. The robust build suits routine industrial use and integrates with standard coating thickness gauges, allowing straightforward replacement or upgrade of existing sensors. Lightweight handling characteristics reduce operator fatigue during repeated measurements, while compatibility with standard instruments supports faster deployment on shop floors and in inspection stations. Data integrity and application-focused capability The sensor supports routine quality control by producing coherent and comparable data across similar test pieces; this makes it well suited to production monitoring and incoming inspection tasks. The probe design prioritises contact stability on larger surface areas and thicker coatings, ensuring that readings reflect the true layer thickness rather than artefacts from edge effects or uneven substrates. Clear specification of suitable materials and measurement conditions helps planners integrate the probe into inspection routines with predictable outcomes. Discuss application requirements with Metav Werkzeuge to confirm compatibility and secure the Metav IndustryLine Probe F1 (M502.431) — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M502.431 GTIN: 4054469162591 Tariff number: 90179000 Type: Probe F1 Category: Coating thickness gauge accessory Facts Weight: 2 kg Cable length: approx. 1 m Minimum measurement area: Ø ≥ 30 mm Minimum coating thickness for reliable reading: > 100 μm Special features Compatible substrates: steel, iron, alloy, magnet Suitable coating materials: zinc, aluminium, chromium, copper, rubber, paint Designed for industrial inspection and workshop use FAQ What substrates can this probe measure reliably? The Probe F1 (Metav IndustryLine probe, M502.431) is suitable for magnetic bases such as steel, iron and alloys while measuring non‑magnetic coatings including zinc, aluminium, chromium, copper, rubber and paint. Does the probe require a minimum test area or coating thickness? Yes — the Probe F1 performs reliably on areas with a diameter of at least Ø 30 mm or when the coating thickness exceeds 100 μm, which avoids edge effects and unstable contacts. What is the cable length provided with this probe? The Probe F1 is supplied with an approximate 1 m cable, allowing flexible positioning during inspection and convenient connection to standard coating thickness gauges. Can this probe be used in production quality control? The probe is designed for routine inspection and production monitoring; its stable contact on sufficiently large and thick coatings supports repeatable measurements useful for quality control processes. Is the Probe F1 compatible with existing coating thickness gauges? The probe is intended as an accessory for coating thickness gauges and will integrate with instruments designed for ferrous and non‑ferrous measurements; please verify connector and instrument compatibility where required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Li 18650 Battery Rechargeable - Filetta
Reliable power and straightforward replacement: the compact Li 18650 cell and original Filetta build quality combine to keep portable measuring instruments running with minimal downtime. Benefit from a proven cell format and quick parts availability; order the replacement directly via Metav Werkzeuge or contact our consultants for application advice. Battery Li 18650 – Rechargeable Li‑ion cell for measuring instruments (Filetta) Battery Li 18650 as a compact, rechargeable power source intended for handheld precision instruments such as roughness and ultrasonic thickness gauges Li‑ion 18650 cell chemistry Rechargeable spare cell Compact, high‑energy format Original Filetta spare part MS497.963 Reliable power for continuous measurement accuracy The Li 18650 format provides a stable power source that helps maintain consistent instrument behaviour during inspection runs. For portable metrology tools, voltage stability and predictable discharge characteristics directly support repeatable readings and reliable data capture; this reduces the risk of interrupted measurement sessions and limits the need for repeated calibrations. The compact cell format also minimises weight and space impact in handheld housings, preserving the instrument's ergonomics and ease of handling while delivering dependable energy for standard measuring routines. Minimise downtime with a straightforward spare‑part solution As an original spare component (SKU MS497.963) from Filetta, the cell is designed for uncomplicated replacement and workshop logistics. Using a standardised 18650 format simplifies inventory management and ensures compatibility with common battery holders used in portable roughness and ultrasonic thickness gauges. Rapid swap‑outs mean less lost production time and a lower overhead for maintenance. Metav Werkzeuge supports procurement and logistics, offering a consistent supply channel and a quality filter for European workshops that demand regular access to calibrated and replacement parts. Safe handling and responsible workshop practice The Li‑ion chemistry calls for standard safety and handling measures: use compatible chargers, avoid extreme temperatures, and follow local regulations for end‑of‑life disposal. Correct handling protects instrument electronics and extends the service life of both the energy cell and the measuring device. Metav’s approach to precision supplies emphasises traceable sourcing and dependable stock levels, supporting customers who require predictable delivery and straightforward replacement strategies for their inspection equipment. Contact Metav Werkzeuge for procurement and technical guidance on Filetta replacement cells and compatible measuring instruments Technical data Article number: MS497.963 Manufacturer: Filetta Designation: Battery Cell type: Li 18650 Category path: Messgeräte › Rauheitsmessgerät › Ultraschall‑Dickenmessgerät Key figures Cell format: 18650 SKU: MS497.963 Special features Li‑ion chemistry Rechargeable cell format Original spare part by Filetta Intended for handheld measuring instruments and portable gauges FAQ Is this cell rechargeable? Yes. The Filetta Li 18650 cell is a rechargeable Li‑ion format commonly used as a replacement power source in portable measuring equipment. Which instruments is this cell suitable for? The replacement cell is intended for use in handheld metrology devices, for example roughness gauges and ultrasonic thickness gauges, where the 18650 format is supported. How is the replacement identified in stock? The spare part appears under SKU MS497.963 and as a Filetta original battery cell in procurement listings. Any special charging recommendations? Use a charger compatible with Li‑ion cells and follow the instrument manufacturer's guidance to avoid overcharge and to maintain battery longevity. How should depleted cells be disposed of? Follow local regulations for lithium‑ion battery recycling and disposal; return schemes or designated recycling points are recommended. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Ensure material integrity with a precise thickness gauge
Thickness gauges, also referred to as thickness meters or thickness testers, are indispensable tools across industries such as metalworking, automotive and chemical processing. These instruments include specialised variants like wall thickness gauges, coating thickness gauges and ultrasonic thickness gauges, each designed to deliver reliable measurements that inform maintenance, quality control and safety decisions.
How the different thickness gauges work in practice
Wall thickness gauges are used to determine the remaining wall thickness of pipes, tanks and boilers and are often employed for corrosion monitoring in petrochemical and food production environments. Coating thickness gauges measure the thickness of paints, lacquers and polymer coatings to ensure compliance with specifications and adequate protection. Ultrasonic thickness gauges operate by sending an ultrasonic pulse through the material and measuring the travel time; from that time and the known sound velocity in the material, the exact thickness is calculated. This method enables contactless measurement where access is limited and where surface coatings should not be penetrated.
Measurable benefits for workshop and production environments
- Improved asset life: accurate thickness readings help plan maintenance and prevent unexpected failures.
- Faster inspections: non-contact ultrasonic measurement reduces inspection time for hard-to-reach areas.
- Compliance assurance: consistent measurement of coating thickness ensures products meet technical specifications.
- Reduced downtime: regular monitoring with a reliable thickness meter enables early detection of wear and corrosion.
- Versatile use: suitable for a wide range of materials, including metals, plastics and composites.
Why choose Metav's range for thickness measurement needs
Metav combines decades of technical expertise with a wide assortment of precision tools, making its selection of thickness gauges a pragmatic choice for industry professionals. With over 48,000 customers and more than 250,000 products available from a centralised stock in Emmerich, Metav supplies consistent quality and dependable delivery for workshops and production sites across Europe. The Metav range is curated to offer practical, field-ready instruments that support both routine inspection and specialised measurement tasks.
Summary
A well-chosen thickness gauge—whether a wall thickness gauge, a coating thickness gauge or an ultrasonic thickness gauge—provides the objective data needed to protect assets, ensure quality and optimise maintenance cycles.
FAQ
What is the difference between a wall thickness gauge and a coating thickness gauge?
A wall thickness gauge measures the material thickness of pipes and vessels to assess structural integrity, while a coating thickness gauge quantifies the thickness of surface layers such as paint or polymer coatings to verify protective performance and adherence to specifications.
Can ultrasonic thickness gauges measure through coatings?
Yes. Ultrasonic thickness gauges calculate thickness from the travel time of an ultrasonic pulse and can measure base material thickness even when a non-intrusive coating is present, making them suitable for coated components that must not be altered.
Which thickness tester is best for corrosion monitoring on pipes?
For corrosion monitoring, a wall thickness gauge or an ultrasonic thickness meter is typically recommended because these instruments reliably detect reduced wall thickness and can be used for periodic inspections on in-service pipes and tanks.
Are thickness meters suitable for non-metal materials?
Many thickness meters, especially ultrasonic models, are suitable for a range of materials including plastics and composites; selection should be based on the material’s acoustic properties and the instrument’s specifications.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com