Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
1.61mm Gauge Pin Length 50mm ±0.001 mm, Workshop Version - Metav IndustryLine
Achieve reproducible reference measurements with the combination of micron-level tolerance, compact 50 mm length and durable special steel construction. Benefit from secure transport storage and workshop-ready design. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.161 — single precision gauge pin, 1.61 mm, ±0.001 mm (Metav IndustryLine) The Gauge pin M323.161 is a single, high-precision test pin designed for reference measurements and bore inspection in workshop metrology. *±0.001 mm tolerance for reference checks *Special steel core for long-term stability *Supplied in transport case for secure storage Consistent, micrometre-level reference for inspection The M323.161 gauge pin provides a ±0.001 mm tolerance, equivalent to 1 µm, making it suitable for demanding reference and inspection tasks where repeatability is essential. With a nominal diameter of 1.61 mm and a length of 50 mm, the pin serves as a reliable datum for small-bore verification, plug-gauge comparison and assembly clearance checks. The extremely small diameter and tight tolerance minimise fit variation, enabling precise verification of end measures and guaranteeing consistent pass/fail decisions in quality control. Robust workshop design that protects accuracy Manufactured from special steel, this test pin balances hardness and dimensional stability to withstand routine handling in a production environment. The compact mass (approx. 0.004 kg) reduces inertia during handling and lowers the risk of accidental deformation. Delivery in a protective transport case ensures the pin arrives free from nicks or contamination, preserving calibration and surface integrity. The workshop specification reflects practical durability without compromising the minute dimensional accuracy required for precision metrology. Integrates into inspection workflows and tooling sets As a single gauge pin, the component is intended for use in gauge sets, checking fixtures and direct bore inspection. It is especially useful for end-measure verification and final inspection steps where a stable, traceable reference is required. Its form and finish support smooth insertion into small bores and tight fits, while the compact geometry fits into existing plug-gauge routines or bespoke test assemblies. The combination of micron tolerance and workshop-ready protection streamlines quality processes and reduces rework from ambiguous measurements. For micron-accurate reference checks and workshop integration, contact Metav Werkzeuge to obtain the Metav IndustryLine M323.161 or request tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.161 GTIN: 4061905055300 Manufacturer: Metav IndustryLine Facts Diameter: 1.61 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop version Material: Special steel Supplied in transport case Single gauge pin for bore and fit checks FAQ What tolerance does the gauge pin offer? The M323.161 gauge pin is specified to ±0.001 mm, providing micrometre-level precision for reference and inspection tasks. Is the pin suitable for small-bore verification? Yes; the 1.61 mm diameter and 50 mm length make the pin appropriate for checking small bores, plug-gauge comparisons and fit verifications. How is the pin protected during transport? The test pin is supplied in a protective transport case to prevent damage and contamination during storage and transit. What material is the gauge pin made from? The pin is manufactured from special steel, chosen for dimensional stability and resistance to routine workshop wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.62mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of a compact precision tool that combines 1.62 mm diameter, ±0.001 mm accuracy and a robust 50 mm length for consistent end‑dimension checks; the workshop version and protective transport case ensure repeatable results on the shop floor. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.162 Gauge pin — single precision test pin, 1.62 mm ±0.001 mm, 50 mm length (Metav IndustryLine) A M323.162 gauge pin designed for high‑precision fit and end‑dimension checks in workshop metrology applications Workshop version for rugged use Precision diameter 1.62 mm ±0.001 mm Durable special steel construction Supplied in protective transport case Accurate small‑diameter inspection for fine components The compact design delivers repeatable results when measuring small bores and mating parts. With a 1.62 mm nominal diameter and a tight ±0.001 mm tolerance, this test pin sits in the micro class of gauge tools where minimal dimensional deviation is critical. The short, 50 mm length keeps the pin stiff and easy to handle, reducing the influence of bending or misalignment during manual checks. Constructed from special steel, the pin resists wear in frequent use, supporting consistent go/no‑go assessments and first‑pass quality control. Streamlined workshop use and reduced rework Optimised for everyday inspection tasks, the tool's workshop execution balances durability with handling ease. The gauge pin is suitable for checking bores, verifying assembly fits and confirming end‑dimensions on small components, which helps keep production flow smooth and rework to a minimum. Supplied in a protective transport case, the pin remains protected between uses, preserving the critical surface finish that underpins the stated tolerance and prolonging service life in a busy shop environment. Practical handling, integration and measurement context At 0.004 kg and 50 mm long, the pin is light enough for quick manual checks yet long enough to reach slightly recessed features. The ±0.001 mm specification positions the instrument for high‑precision manual gauging tasks; this level of deviation is routinely relied on in fine mechanical assembly and precision inspection. For integration into existing routines, the pin functions as a stable reference for go/no‑go comparisons and complements bench gauges or optical systems where a compact, high‑accuracy probe is required. For reliable small‑bore verification and workshop resilience, order the M323.162 gauge pin from Metav Werkzeuge — contact our specialists in Emmerich for specific application advice and availability. Technical data Article number: M323.162 GTIN: 4061905055317 Label: Gauge pin, single, 1.62 mm, ±0.001 mm, length 50 mm Material: Special steel Version: Workshop execution Core measurements Diameter: 1.62 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Supplied in protective transport case Designed for end‑dimension checks Robust finish for frequent workshop use FAQ What tolerance does the M323.162 offer? The M323.162 gauge pin is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision fit checks. Which materials is the M323.162 suitable for inspecting? The M323.162 gauge pin, produced in special steel, is intended for use on common metallic workpieces and for checking bore diameters and mating features in metal components. How is the M323.162 packaged for transport? The M323.162 is supplied in a protective transport case, ensuring the pin retains its surface condition and dimensional integrity during storage and transport. What length and weight does the M323.162 have? The M323.162 has a length of 50 mm and a mass of 0.004 kg, offering a balance between reach and rigidity for manual inspection. Which brand manufactures the M323.162 gauge pin? The M323.162 is part of the Metav IndustryLine range and is identified by SKU M323.162 for straightforward ordering and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.63mm Gauge Pin Precision ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
The compact design and ±0.001 mm repeatability make this inspection pin ideal for precise end‑measure checks and repeatable locating tasks; combined with special steel for durable contact surfaces, it supports reliable series inspection. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.163 — single 1.63 mm inspection pin, ±0.001 mm, 50 mm The gauge pin M323.163 is a workshop‑grade inspection pin intended for end‑measure verification and fixture locating in metalworking and assembly environments. Workshop-grade precision variant Diameter 1.63 mm tolerance ±0.001 mm Length 50 mm for end-measure checks Special steel for wear resistance Reliable precision for repeatable inspections A narrow diameter with a tolerance of ±0.001 mm provides the high level of accuracy required for go/no‑go verification and reference measurements in small components. The 1.63 mm nominal size is suitable where compact locating elements are needed; the tight tolerance reduces measurement scatter and increases repeatability when used in series checks or mating with hardened bushings. For quality assurance routines, the predictable geometric behaviour of the pin minimises rework and supports consistent pass/fail decisions. Robust workshop construction that reduces maintenance Manufactured in special steel and finished for contact durability, this workshop‑version inspection pin withstands frequent insertion and contact without rapid surface degradation. The material choice balances hardness and resistance to wear, so locating accuracy is retained over many cycles and tool changes. The design focus on solidity rather than delicate laboratory finishes makes the component suitable for daily use in production jigs, gauges and simple test fixtures where downtime must be kept to a minimum. Compact format for versatile fixturing and end‑measure tasks With a length of 50 mm, the pin provides sufficient engagement for end‑measure tasks and positioning while remaining easy to handle within tight assemblies. Its modest mass and slim profile suit confined fixture layouts and allow close packing in multi‑pin arrangements. The pin performs well as a reference element for small parts, alignment aids or temporary locating, and integrates seamlessly into existing inspection stations without the need for specialised adaptors. Choose the Metav IndustryLine gauge pin for dependable micro‑locating performance — contact Metav Werkzeuge GmbH in Emmerich for procurement or technical advice. Technical data SKU: M323.163 GTIN: 4061905055324 Product: Single gauge pin, workshop version Dimensions & accuracy Diameter: 1.63 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Materials & features Material: Special steel Workshop-grade execution Suitable for end-measure and locating applications FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.001 mm, ensuring tight dimensional control for fine inspection tasks. Is this pin suitable for repeated fixture use? Yes; the special steel construction and workshop execution make the pin suitable for repeated insertion and locating duties in production fixtures. Which applications is the pin intended for? Typical uses include end‑measure verification, positioning in jigs and simple go/no‑go checks for small components. How is the product identified for ordering? Order reference is SKU M323.163 and GTIN 4061905055324 for clear identification in procurement and stock systems. Can the pin be used alongside hardened bushings and gauges? The compact 1.63 mm diameter and durable finish make it compatible with common locating bushings and fixture arrangements for small parts. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.64mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Precision for end-dimension checks is delivered through the combination of a tight ±0.001 mm tolerance and a special steel construction in a compact 50 mm format; this ensures reproducible results and robust workshop handling. Order the gauge pin directly via Metav Werkzeuge or consult our advisers for guidance on integration into inspection routines. Gauge pin, single — 1.64 mm, ±0.001 mm (50 mm length) | Metav IndustryLine The Gauge pin, single, 1.64 mm ±0.001 mm, 50 mm length is a workshop-grade precision test pin designed for end-dimension verification and fine-component measurement. Workshop-grade construction Diameter 1.64 mm ±0.001 mm tolerance 50 mm length with protective transport case Accuracy that secures repeatable results The gauge pin offers a ±0.001 mm dimensional tolerance, a specification that positions it for tasks where micrometre-level consistency matters. Such tolerance reduces measurement uncertainty when verifying end dimensions and ensures repeatability across multiple checks. For production and inspection environments this translates into fewer rejects, clearer go/no‑go decisions and faster validation cycles; the verified tolerance supports documented quality control without elaborate auxiliary equipment. Compact format for fine mechanical and assembly work With a diameter of 1.64 mm and a 50 mm overall length, this test pin belongs to the micro range of measuring tools and is optimised for fine mechanical assemblies and delicate components. The small form factor allows precise placement in narrow bores or against small faces while remaining easy to guide by hand or with simple fixtures. The compact design therefore combines accessibility with stiffness, making it suitable for watchmaking, miniature tooling and end‑dimension sampling where space and control are limiting factors. Robust material and workshop suitability Constructed from special steel, the pin balances wear resistance with dimensional stability under normal workshop conditions. The workshop-grade finish resists minor knocks and routine handling, which helps retain the tight tolerance over time. Delivery includes a protective transport case, preserving the measuring surface during storage and transit and reducing the risk of nicks that would compromise accuracy. The low mass and compact geometry also permit quick manual checks without adding measurement instability. Practical use in inspection and production workflows The pin functions as a straightforward reference for end‑dimension verification and can be used alongside gauge blocks, optical comparators or simple fixture checks. Its small profile suits spot checks, first‑piece inspections and periodic sampling to confirm machining accuracy. By choosing a dedicated measuring pin with the stated tolerance, inspection routines gain clarity: fewer ambiguous results, faster pass/fail decisions and improved traceability for documented quality checks. Integration into existing workflows is simple and yields measurable process reliability. For workshop-ready, high-precision end-dimension verification request the Metav IndustryLine gauge pin through Metav Werkzeuge GmbH in Emmerich for tailored advice and reliable supply Technical data Article number: M323.164 GTIN: 4061905055782 Manufacturer: Metav IndustryLine Core specifications Diameter: 1.64 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Maximum measuring range: 1.64 mm Special features Material: special steel Workshop execution (workshop-grade) Protective transport case included Intended use: end-dimension verification Category: Gauge pins FAQ What tolerance does this gauge pin provide? The gauge pin M323.164 is specified with a tolerance of ±0.001 mm, suitable for micrometre‑level end-dimension checks. Is the pin suitable for fine mechanical work such as watchmaking? Yes, the compact diameter and 50 mm length place this pin in the micro range, making it well suited to watchmaking and other fine‑component applications. Which material is used for the test pin? The pin is manufactured from special steel, selected for dimensional stability and resistance to routine workshop wear. Is a protective case supplied with the pin? Delivery includes a protective transport case to preserve the measuring surface during transport and storage. How is the pin typically employed in inspection routines? The pin is used for end-dimension verification and spot checks, often together with gauge blocks or simple fixtures to confirm component tolerances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.65mm Gauge Pin Length 50mm ±0.001mm Workshop Version, Special Steel IP20 - Metav IndustryLine
The compact combination of high repeatability and minimal form factor makes this gauge pin a reliable choice for pinpoint end‑measure checks; its ±0.001 mm tolerance and 1.65 mm diameter ensure consistent inspection results. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge Pin M323.165 – 1.65 mm, ±0.001 mm (50 mm length) by Metav IndustryLine The Gauge Pin M323.165 is a precision inspection pin designed for fine gauging and end‑measure verification in workshop and small‑parts quality control. ±0.001 mm tolerance for high precision 1.65 mm diameter for fine gauging 50 mm length for secure handling Workshop‑grade construction Precision that secures measurement decisions The core advantage of this inspection pin is its ±0.001 mm declared accuracy, which translates into reproducible checks for critical fits and end dimensions. Specified tolerance values indicate the maximum deviation allowed during production and inspection, so using such a gauge pin reduces uncertainty when validating bores, pin fits or mating features. The 1.65 mm diameter is suited to fine detail work where larger pins would disturb the datum; the small cross‑section supports accurate seating without altering the part geometry. Robust form and straightforward handling for workshop use Manufactured from special steel, the pin balances stiffness and wear resistance for repetitive use in an industrial setting. The 50 mm overall length provides a comfortable gripping area while keeping the functional section clear for measurement tasks. As a workshop‑grade item, this pin is intended for regular inspection cycles and production sampling, delivering the mechanical stability needed for frequent contact‑based checks without excessive handling complexity. Typical applications and procurement guidance This inspection pin is primarily used for end‑measure verification, pin‑gauge checks and fine assembly control in metalworking and precision engineering. For traceable quality processes, reference to the declared tolerance and material ensures compatibility with standard inspection routines. If clarification is required about fit classes or integration into a gauging set, the Gauge Pin M323.165 from Metav IndustryLine can be specified as a component in fixture lists or incoming inspection kits — Metav consultants are available to advise on selection and set composition. Choose Metav IndustryLine gauge pins for consistent micro‑gauging accuracy and contact Metav Werkzeuge for tailored advice and procurement: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M323.165 GTIN: 4061905055799 Manufacturer: Metav IndustryLine Core specifications Diameter: 1.65 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Materials & features Material: special steel Version: workshop execution Category: gauge pin Intended use: end‑measure verification FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.165 is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision inspection tasks in workshop and production environments. Which materials is the pin suitable for checking? As a dimensional inspection tool, the M323.165 gauge pin is used to verify geometries of components made from metals and other rigid materials where a 1.65 mm reference is required. Is the pin part of a calibrated set? Calibration status is not implied by the product data; calibration options and certificates can be arranged separately on request for the M323.165 to meet specific quality‑assurance requirements. How does the 50 mm length affect handling? The 50 mm overall length gives sufficient grip for manual use while keeping the measuring section accessible, improving handling during repetitive inspection routines. Can the M323.165 be used in assembly fixtures? Yes, the compact diameter and precise tolerance of this gauge pin make it suitable as a reference element in assembly jigs and verification fixtures for small components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.66mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Order a combination of workshop-grade robustness and sub-micron accuracy: the probe pin delivers ±0.001 mm tolerance on a 1.66 mm nominal diameter with a 50 mm usable length, ensuring consistent end‑dimension checks. Secure procurement directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Pin M323.166 — single probe pin, 1.66 mm, ±0.001 mm (50 mm) The Gauge Pin M323.166 is a workshop-grade precision probe intended for end‑dimension verification and repeatable checking tasks in quality control and inspection. ±0.001 mm tolerance 1.66 mm nominal diameter 50 mm usable length Workshop-grade special steel Precision that reduces rework and inspection uncertainty This probe pin is engineered for tight dimensional control: with a ±0.001 mm positional tolerance on a 1.66 mm nominal diameter and a 50 mm shaft length, the component supports reliable end‑dimension checks where small deviations matter. The high mechanical stability of the shaft reduces bending and measurement scatter, translating into fewer false rejects and less rework. The special steel construction maintains form under repeated contact, extending service life and lowering the total cost of inspection per measurement. Stable handling for repetitive QC routines A workshop-focused design keeps handling straightforward while preserving measurement integrity. At just 0.004 kg, the pin is easy to manoeuvre in fixture systems and gauges, but remains stiff enough for repeatable contact. The result is high repeatability between measurements and operators, which is essential for statistical process control and batch acceptance testing. This stability supports faster inspection cycles and a clearer view of process capability without complex fixturing. Simple integration into gauge sets and test fixtures The single‑unit supply is suited to retrofitting existing gauge plates or building dedicated probe assemblies. The compact geometry of the shaft and the standardised diameter enable compatibility with common gauge housings and receiving holes, simplifying procurement and logistics. Documentation-friendly identification (SKU and GTIN) eases inventory management and traceability within inspection systems, helping to maintain auditable measurement records for production runs. Confidence through brand and quality filtering Sourced under the Metav IndustryLine, this probe pin benefits from Metav’s role as a quality filter for the European market. The supplier’s emphasis on accessible precision means dependable stock levels and consistent product standards for industrial and workshop customers. Where traceability and supplier reliability affect production planning, a proven supply partner reduces procurement risk and supports continuous measurement quality across the shop floor. Contact Metav Werkzeuge to reserve the Metav IndustryLine M323.166 for precise end‑dimension verification or to request tailored application guidance from our consultants Technical data SKU: M323.166 GTIN: 4061905055805 Article description: Gauge pin, single, 1.66 mm, ±0.001 mm, length 50 mm Core specifications Nominal diameter: 1.66 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Materials & features Material: special steel Workshop execution Single unit supply Application: end‑dimension checks FAQ What is the intended application for this probe pin? The probe pin M323.166 is intended for end‑dimension checks and repeatable verification tasks within inspection fixtures and gauge sets. How precise is the gauge pin and what does that mean for production control? With a tolerance of ±0.001 mm, the pin provides sub‑micron positional control that reduces uncertainty in critical dimension inspections and supports tighter process control. Is the material suitable for frequent contact use? Yes, the pin is manufactured from special steel designed for workshop use, offering durability under repeated contact and stable dimensional performance. Can this pin be used with existing gauge housings? The standardised 1.66 mm nominal diameter and compact geometry make the pin compatible with common receiving holes and gauge housings for straightforward integration. Which identifiers support traceability and ordering? Order and inventory control can use the SKU M323.166 and GTIN 4061905055805 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.67mm Test Pin Single ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, 1.67 mm nominal diameter and a compact 50 mm length to ensure reproducible end‑size checks in workshop environments; supplied as a single workshop‑grade gauge pin and delivered in a protective case, order via Metav Werkzeuge or consult our advisors for specification support. M323.167 gauge pin — 1.67 mm diameter, ±0.001 mm precision (Metav IndustryLine) The M323.167 gauge pin is a workshop‑grade precision test pin designed for reliable end‑size checking, plug‑gauge tasks and small‑bore inspection in machining and quality control. Workshop version for industrial use Tight tolerance ±0.001 mm Diameter 1.67 mm, length 50 mm Delivered in protective case Precise measurement where repeatability matters A compact gauge pin with a ±0.001 mm tolerance provides the dimensional certainty required for end‑size verification and go/no‑go plug testing. The small nominal diameter of 1.67 mm and a rigid 50 mm shank reduce flex and improve repeatability in confined bores or small assemblies. Constructed from special steel, the pin resists wear under frequent probing and maintains its form for consistent contact geometry. For production routines and incoming inspection, the combination of tight tolerance and robust material minimises rework and inspection variance, improving throughput in repetitive checks. Robust workshop design for dependable handling Designed as a workshop execution part, this single test pin suits bench inspection and fixture‑based checks. The hardened working surface and slim profile enable access to narrow features without compromising stiffness. Supplied individually and protected in a transport case, the pin is ready for storage and safe transport between workstations. The straightforward geometry makes the component compatible with manual gauges, fixture seats and simple plug‑gage assemblies, reducing setup time and lowering the risk of measurement error during routine quality procedures. Practical benefits for inspection workflows Integrating a high‑precision pin such as this into inspection routines streamlines decision‑making: clear pass/fail outcomes are delivered by mechanical fits or tactile gauges rather than subjective visual checks. The M323.167 from the Metav IndustryLine supports rapid verification of bore sizes and component ends, helping to avoid production bottlenecks. Its narrow diameter and precise tolerance are particularly useful for small‑part suppliers, toolrooms and maintenance teams who require compact, repeatable measurement tools that fit into existing control processes without complex fixtures. Contact Metav Werkzeuge for specification advice and local supply of the Metav IndustryLine M323.167 gauge pin, available from our Emmerich warehouse and ready for immediate dispatch or technical consultation Technical data SKU: M323.167 GTIN: 4061905055812 Weight: 0.004 kg Material: Special steel Type: Single gauge pin Facts Diameter: 1.67 mm Length: 50 mm Tolerance: ±0.001 mm Special features Workshop version Delivered in protective case Intended for end‑size checking Single item delivery FAQ What nominal diameter does the gauge pin have? The gauge pin has a nominal diameter of 1.67 mm and is supplied as the single item SKU M323.167 for targeted inspections. How tight is the tolerance on the pin? The pin is manufactured to a tolerance of ±0.001 mm, providing high repeatability for go/no‑go and end‑size checks. What material is used for the pin? The pin is made from special steel, chosen for wear resistance and dimensional stability in workshop conditions. Is the pin suitable for small‑bore inspections? Yes, the compact 1.67 mm diameter and 50 mm length make it ideal for narrow bores and confined geometries in routine inspection. How is the pin delivered and stored? The gauge pin is supplied individually and packed in a protective transport case to preserve the working surface during storage and transfer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.68mm Gauge Pin, ±0.001mm Accuracy, Length 50mm, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of razor‑sharp repeatability and compact handling: the gauge pin delivers 1.68 mm diameter accuracy with a tight ±0.001 mm tolerance and a robust 50 mm length for reliable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or consult the technical team for application support. Gauge Pin M323.168 — Single 1.68 mm Ø, ±0.001 mm, 50 mm (Metav IndustryLine) The Gauge Pin M323.168 is a workshop‑grade test pin designed for precise end‑measurement, alignment and go/no‑go verification in inspection and assembly workflows. Diameter 1.68 mm precision ground Tolerance ±0.001 mm for high repeatability Length 50 mm workshop specification Supplied in transport case for protection Precision where it makes the difference The gauge pin is manufactured for high‑precision inspection tasks and provides a repeatable reference thanks to its ±0.001 mm specification. A tolerance at this level allows for consistent end‑dimension verification in small‑part production and quality control, reducing rework and inspection time. The hardened, ground diameter of 1.68 mm ensures stable contact with gauge bores and fixtures, supporting quicker decisions on part conformity and enabling tighter process control. Built for workshop durability and easy handling Designed as a workshop version, the test pin combines compact geometry with a corrosion‑resistant special steel finish, giving a balance of wear resistance and dimensional stability during regular use. The 50 mm length offers sufficient reach for many fixture and assembly checks while remaining easy to manoeuvre by hand or in test rigs. Each pin is supplied in a protective transport case, limiting the risk of damage in storage and transit and helping maintain the reference condition between uses. Seamless integration into inspection routines As a single gauge pin for end‑measure and alignment tasks, this test pin suits applications such as bore checking, pin‑fit verification and fixture calibration where small diameters are critical. The product supports quick manual checks and can be incorporated into bench gages or automated fixtures where compact, high‑accuracy references are required. For practical queries on using the gauge pin in specific measurement chains or for compatibility with existing jigs, Metav’s technical advisers can provide targeted recommendations via info@metav-werkzeuge.com or by telephone at +49 2822 7131930. For dependable small‑diameter references choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for tailored guidance and fast supply from Emmerich Technical data Article number: M323.168 GTIN: 4061905055829 ECLASS: 21170231 Data Diameter: 1.68 mm Length: 50 mm Tolerance/Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Workshop version Supplied in transport case Category: Gauge pins (Messstifte) FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.168 is specified with an accuracy of ±0.001 mm, making it suitable for fine inspection and tight tolerance checks. Which material is used for the pin and what does that mean for durability? The test pin is made from special steel, chosen for dimensional stability and wear resistance in workshop environments. Is the pin delivered protected for transport and storage? Yes, the gauge pin is supplied in a protective transport case to reduce the risk of damage and help preserve its reference condition. Can this pin be used for bore and pin‑fit verification in fixtures? The 1.68 mm diameter and 50 mm length make the pin appropriate for bore checks, pin‑fit tests and fixture alignment in small‑part assemblies. How can measurement teams get advice on integrating this pin into existing procedures? Metav’s technical team can advise on application and setup; contact via info@metav-werkzeuge.com or call +49 2822 7131930 for detailed guidance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.69mm Testing Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high-precision tolerance (±0.001 mm), robust special-steel construction and a compact 50 mm length to ensure reliable end-measurements in inspection stations and gauges; order the test pin directly via Metav Werkzeuge or consult the specialists for application advice. Test pin M323.169 — 1.69 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) A Test pin M323.169 for precision inspection and gauge use in metrology and quality control environments. High-precision diameter ±0.001 mm Hardened special-steel construction 50 mm overall length for deep measurements Precision where dimensional certainty is required The probe offers a diameter of 1.69 mm with a verified tolerance of ±0.001 mm, positioning it in the high-precision class for small-diameter inspection pins. Such accuracy reduces measurement uncertainty when checking end dimensions or reference fits in gauges and fixtures. The tight tolerance is particularly valuable in final inspection, where repeatable results and traceable pass/fail decisions are required. This precision supports efficient quality control and reduces rework rates. Built to withstand workshop conditions Manufactured from special steel, the pin combines wear resistance with dimensional stability for repetitive use in workshop and production environments. The 50 mm length gives access into deeper holes and recessed features while remaining rigid enough to avoid deflection in typical inspection setups. The item is supplied as a single unit and is delivered in a protective transport case, which safeguards the pin during storage and transit and keeps handling effects to a minimum. Practical integration into inspection workflows Designed for gauge, fixture and hand-held inspection applications, the probe pin suits both serial inspection and sample checks. Its compact form makes it straightforward to install in custom fixtures or to use with bench-mounted measuring assemblies. The construction supports consistent contact with measured surfaces, ensuring reliable end-measurements and simplifying the interpretation of results during production control and incoming inspection. Contact Metav Werkzeuge for application guidance, availability details and to discuss integration of the M323.169 into existing inspection equipment Technical data Article number: M323.169 GTIN: 4061905055836 SKU: M323.169 Category: Test pins Workshop version: yes Diameter: 1.69 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.004 kg Material: special steel Supplied in protective plastic or wooden transport case Single-piece supply Intended use: end measurement, inspection, gauge applications Feature: workshop execution FAQ What level of accuracy can be expected from this test pin? The test pin is manufactured to an accuracy of ±0.001 mm, making the M323.169 suitable for high-precision inspection tasks and tight-tolerance checks. Is the pin suitable for use in gauge fixtures and press-in inserts? Yes, the probe pin’s special-steel construction and 50 mm length make it appropriate for installation in gauge fixtures and similar inspection assemblies. How is the product packaged for transport? The item is supplied as a single pin and delivered in a protective transport case (plastic or wooden as appropriate) to prevent damage during transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.6mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometre-level accuracy (±0.001 mm), a compact 1.60 mm diameter, and a robust 50 mm length for repeatable inspection results; order directly via Metav Werkzeuge or consult our specialists for application advice. M323.160 Gauge pin — 1.60 mm Ø, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.160 gauge pin is a precision inspection pin designed for fine metrology tasks and end‑measurement checks in workshop and laboratory quality control. Diameter 1.60 mm ±0.001 mm tolerance 50 mm hardened length for stable contact Special steel for wear resistance Workshop version for everyday use Precise tolerances that speed up quality checks The extremely fine ±0.001 mm tolerance of this inspection pin delivers a measurable advantage when precision is critical. Such accuracy reduces ambiguity in go/no‑go assessments and aids consistent pass/fail decisions during incoming inspection and shop‑floor checks. The small 1.60 mm diameter suits fine bores and small features where larger gauges would be impractical. By using a dedicated inspection pin with defined tolerance, measurement variability is minimised and traceability of results is improved, which supports faster decision‑making in production and incoming goods control. Durable workshop design for repeatable contact Built as a workshop version, the pin combines practical robustness with dimensional integrity. The shaft is made from special steel, providing resistance to wear and ensuring a stable contact surface over many cycles. The 50 mm length offers sufficient reach for recessed features while maintaining rigidity during handling. This balance of length and material choice helps keep deformation low and repeatability high, so routine checks remain reliable without unnecessary rework or adjustments to fixtures. Simple integration into measurement routines The compact geometry of the pin allows easy use with bench indicators, height gauges and dedicated gauge holders; it also fits into small inspection fixtures where precise end‑measures are required. Readings obtained with this inspection pin integrate smoothly into standard quality documentation and control plans. Clear, verifiable specifications such as diameter, length and tolerance make it straightforward to include the pin in measurement protocols and calibration schedules, supporting consistent quality outcomes across shifts. For reliable micron‑level inspection choose the Metav IndustryLine M323.160 gauge pin — contact Metav Werkzeuge for order and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.160 GTIN: 4061905055294 Weight: 0.004 kg Length: 50 mm Diameter: 1.60 mm Accuracy: ±0.001 mm Facts Category: Gauge pin / inspection pin Brand: Metav IndustryLine Version: Workshop execution Label: Single gauge pin, 1.60 mm Special features Material: Special steel Intended use: End‑measure inspection and fine bore testing Application: Precision metrology and workshop quality control Packaging: Single item FAQ What measurement tolerance does this gauge pin offer? The M323.160 gauge pin is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision inspection tasks. Can the pin be used for small bore inspection? Yes, the 1.60 mm diameter is ideal for checking small bores, tight features and precision components where larger gauges cannot be applied. Which applications are best suited to this inspection pin? The pin is intended for workshop and laboratory quality control, end‑dimension checks and integration into inspection fixtures for go/no‑go assessments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.71mm Test Pin Single ±0.001mm Accuracy Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of submicron accuracy, robust workshop design and reliable material stability for repeatable end‑measure checks; order via Metav Werkzeuge or consult the technical team for application advice. Test pin M323.171 — precision test pin, Ø 1.71 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A test pin M323.171 engineered for high‑precision end‑measure checks and gauge setting in workshop and inspection environments. Diameter 1.71 mm, tolerance ±0.001 mm Length 50 mm, workshop grade construction Special steel for dimensional stability Repeatable accuracy for gauge and fixture validation The probe provides a diameter of 1.71 mm with a verified positional tolerance of ±0.001 mm, enabling reliable reference points in measuring rigs and plug gauges. Specified accuracy supports traceable assembly and calibration tasks where small deviations propagate into functional faults; the precise tolerance reduces measurement uncertainty and simplifies statistical process control. Compatibility with common fixture bores and standard gauge blocks ensures the component integrates cleanly into existing inspection chains. Robust material and form for workshop use Produced from special steel, the pin combines hardness with corrosion resistance to preserve contact geometry under repeated handling. The 50 mm length offers sufficient reach for end‑face and alignment checks while remaining stiff enough to avoid buckling in typical probe applications. The workshop execution is aimed at routine metrology tasks and jigs; surface finish and roundness are controlled to maintain consistent contact points during comparative measurements and during use with holding fixtures. Practical integration into quality workflows Marked by a compact design and a low mass, the component is suited for rapid inspection cycles and repeat measurements. The precise tolerance enables quicker Go/No‑Go assessments and reduces rework by catching deviations early in production. As a calibrated reference element it supports measurement reproducibility in production sampling plans and can be used alongside micrometres, dial indicators and height gauges to establish or check end‑measure standards. Traceability and identification for shopfloor control Unique identifiers such as the SKU and GTIN link the item to inspection records and inventory systems, aiding auditability and change control. Lightweight construction minimises accidental loading on delicate fixtures, while the controlled geometry lowers the risk of accumulative error when used as a reference pin. The workshop orientation of the product reflects a balance between everyday robustness and metrological performance required in small‑batch and serial production environments. Contact Metav Werkzeuge for procurement and application guidance on the M323.171 precision test pin — technical consultants are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to advise on integration into existing gauge systems Technical Data Article number: M323.171 GTIN: 4061905056604 Manufacturer: Metav IndustryLine Facts Diameter: 1.71 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Workshop execution Single test pin Category: Test pins / Messstifte FAQ What accuracy can be expected from this test pin? The M323.171 test pin is specified with a tolerance of ±0.001 mm, making it suitable for fine end‑measure checks and reference applications in inspection equipment. Which materials is the pin made from and how does that affect use? Manufactured from special steel, the pin offers dimensional stability and surface durability, supporting repeated contact without rapid degradation of the contact geometry. Is this test pin suitable for use with plug gauges and alignment fixtures? Yes; the dimensional specification and 50 mm length make the M323.171 appropriate for plug gauge checks, fixture alignment and related end‑measure tasks in workshop environments. How is the product identified for traceability and inventory purposes? The item is listed as SKU M323.171 with GTIN 4061905056604 to support traceability in quality systems and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.72mm Test Pin, ±0.001 mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied In Case - Metav IndustryLine
Take advantage of the pin's 1 µm accuracy, compact 50 mm length and workshop-grade construction for reliable end‑measurement routines; order directly via Metav Werkzeuge or consult our specialists if further advice is required. Test pin M323.172 — single precision gauge pin, 1.72 mm diameter, ±0.001 mm Test pin M323.172 designed for precise end measurements in inspection benches and fixture checks. Diameter 1.72 mm with ±0.001 mm accuracy 50 mm length, workshop execution Delivered in protective transport box Consistent accuracy for process control The pin provides a tolerance of ±0.001 mm, equivalent to 1 micrometre, which stabilises gauging routines and reduces measurement scatter in serial inspection. Such small form‑error limits are particularly beneficial when calibrating plug gauges, verifying end masses or checking positional features on delicate components. The narrow diameter of 1.72 mm paired with the stated tolerance supports high repeatability and makes the pin suitable for integration into measurement jigs or tactile probe checks where reproducible contact geometry is essential. Compact format for fine mechanical inspection With a 50 mm usable length in a compact workshop design, this pin fits tight fixtures and small assemblies without compromising rigidity. Classified as a micro‑sized test pin for fine mechanical work, it is optimised for applications such as micro‑machined parts, precision connectors and small bore verification. The transport‑safe packaging ensures the measuring face remains free of transport damage, preserving the pin’s calibrated geometry and extending service intervals—this is practical for quality departments that require ready‑to‑use, traceable inspection items. Robust material and traceability for daily use Manufactured from special steel in a workshop execution, the pin balances hardness and wear resistance for routine contact measurements while remaining light at approximately 0.004 kg. The concise design reduces handling errors during frequent use and supports quick changeover in bench fixtures. Identifiers such as SKU M323.172 and GTIN 4061905056611 aid inventory and documentation workflows, simplifying traceability in quality records and part lists. The product is intended for end‑measurement tasks and workshop inspection; handling and storage in the supplied transport box maintain surface integrity between uses. Choose Metav IndustryLine's Test pin M323.172 for dependable micro‑measurement tasks and contact Metav Werkzeuge in Emmerich for delivery details or purchasing guidance. Technical data Article number: M323.172 GTIN: 4061905056611 Material: Special steel Diameter: 1.72 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Version: Workshop execution Core data Diameter: 1.72 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg SKU: M323.172 Special features Delivered in protective transport box Designed for end measurements Compact format for small fixtures Category: Gauge/test pin FAQ What level of precision does the test pin offer? The test pin M323.172 achieves a tolerance of ±0.001 mm, delivering micrometre‑level precision suitable for high‑repeatability inspection tasks. Is the pin suitable for small bore or connector checks? Yes, the 1.72 mm diameter and 50 mm length make the pin appropriate for small bore verification and fine connector inspections in workshop environments. What material is used and how does that affect durability? Made from special steel, the pin balances hardness and wear resistance for frequent contact measurements while remaining light for easy handling. How is the product supplied to protect measurement faces? The pin is supplied in a protective transport box to prevent surface damage and to maintain the integrity of the measuring face during storage and transport. Can the pin be used in automated fixtures or probe testing? Its compact and rigid design allows integration into measurement jigs or probe checks where a consistent contact geometry is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.73mm Test Pin Length 50mm ±0.001 mm, Workshop Version, Special Steel in Case - Metav IndustryLine
Compact, workshop-ready precision for reliable end‑measure checks: the combination of 1.73 mm diameter, ±0.001 mm tolerance and a 50 mm working length ensures repeatable results and fewer rejects. Order via Metav Werkzeuge or consult our specialists for any technical questions. Pin gauge M323.173 — single inspection pin, 1.73 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Pin gauge M323.173 is a single, workshop‑grade inspection pin designed for precise end‑measure verification and reference checks in small‑part metrology. Workshop-grade precision pin Diameter 1.73 mm Tolerance ±0.001 mm Length 50 mm, special steel Consistent measurement confidence through tight tolerance A tolerance of ±0.001 mm places this tool in the high‑precision class for pin gauges, making it suitable where repeatability and minimal measurement uncertainty are critical. The very small 1.73 mm diameter, combined with the 50 mm shank, permits reliable end‑measurement and reference probing of bores, holes and mating features. By reducing dimensional dispersion at the inspection stage, the gauge contributes directly to lower scrap rates and fewer downstream corrections, which is a clear operational advantage in production and quality control processes. Robust workshop execution for everyday handling Built in a workshop execution and manufactured from special steel, the pin is dimensionally stable and resists wear under normal metrology handling. The compact form factor suits benchwork and jig checks, while the solid construction supports repeated insertions without rapid degradation of the measuring surface. This combination of durability and precise geometry preserves the gauge’s functional life, helping maintain repeatability across batches and shifts and ensuring trustworthy reference values for go/no‑go comparisons. Easy integration into inspection routines and fixtures The single‑piece configuration makes the gauge straightforward to use as a reference pin in fixture set‑up, end‑measurement benches or slot and hole verification routines. The M323.173 is particularly useful for end‑measure applications where compact diameters and tight tolerances define acceptance criteria. When documented inspection data are required, the stable dimension of this pin helps form a reproducible baseline for comparative checks and process validation, supporting traceability and quality audits. For dependable end‑measurement checks and workshop reliability, request the Metav IndustryLine pin gauge via Metav Werkzeuge in Emmerich or ask our specialists for a tailored recommendation. Technical Data Article number: M323.173 GTIN: 4061905056628 Description: Single pin gauge, diameter 1.73 mm, tolerance ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Core data Diameter: 1.73 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop execution Material: special steel Category: gauge pins Application trigger: end measurements FAQ What applications suit this gauge pin best? The pin gauge is intended for end‑measure verification, hole and bore checks and as a reference probe in fixture set‑ups; the M323.173 is optimised for small‑diameter checks where ±0.001 mm accuracy is required. Is the material suitable for regular workshop use? Yes, the special steel construction and workshop execution provide good wear resistance for routine inspection tasks and repeated insertions. How does the tolerance affect inspection outcomes? A ±0.001 mm tolerance reduces measurement uncertainty and improves repeatability, supporting stringent quality controls and lowering the risk of false rejects. Can this pin be used in fixture alignment or as a reference standard? The single, stable geometry of the gauge pin makes it appropriate for use as a reference pin in fixtures and alignment procedures, offering a reproducible datum for comparative measurements. What identification is available for procurement and traceability? This item is listed as M323.173 with GTIN 4061905056628 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.74mm Test Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
With a nominal diameter of 1.74 mm, a tight tolerance of ±0.001 mm and a 50 mm length in special steel, this workshop-grade test pin supplies a stable reference for repeatable end-measurements and fixture checks. Combine high accuracy, robust material and compact form to reduce setup time and minimise inspection variability. Order the M323.174 directly via Metav Werkzeuge or ask our consultants for application advice. Test pin M323.174 — precision gauge pin, 1.74 mm, ±0.001 mm (Metav IndustryLine) The Test pin M323.174 is a single-piece precision gauge pin intended for end-measurements, go/no-go checks and fixture alignment in workshop and inspection settings. 1.74 mm nominal diameter, ±0.001 mm tolerance 50 mm length for reliable fixture access Workshop version with robust special steel Compact reference for precision inspection Consistent accuracy for critical inspection points The pin’s defining characteristic is its ±0.001 mm tolerance on a 1.74 mm diameter, which delivers repeatable reference points for dimensional checks. Specified accuracy minimises measurement scatter and reduces the likelihood of downstream rework, making the component suitable as a reference in short-run quality checks and fixture validation. As a precision reference, the pin supports faster decision-making in inspection routines by providing a reliable datum for comparative gauging and setup verification. Built to withstand everyday workshop handling Manufactured from special steel and supplied as a workshop-grade component with a 50 mm length, the pin balances wear resistance and handling ease. The material choice improves resistance to abrasion during repeated seating in holders and jigs, while the compact form factor ensures straightforward placement in tight fixtures. Robust construction translates to longer service life under normal workshop use, helping maintain measurement consistency between inspection cycles. Easy integration into measurement and fixture workflows Designed as a single-piece gauge pin, this reference component fits standard holders and test benches used for end-measurements and alignment tasks. Its compact dimensions and precise tolerances reduce setup complexity and enable quicker reference checks, decreasing machine idle time and contributing to a more efficient inspection process. The combination of accuracy and handling benefits makes the pin a practical addition to routine quality-control tool sets in general mechanical and metrology environments. Contact Metav Werkzeuge for specification matching and to request the Metav IndustryLine M323.174 test pin as a reliable reference for inspection and fixture setup Technical data Article number: M323.174 GTIN: 4061905056635 Manufacturer: Metav IndustryLine Facts Diameter: 1.74 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Special features Material: Special steel Workshop version Single-piece supply Category: Gauge pin (Messstifte) FAQ What tolerance is achieved with this gauge pin? The M323.174 test pin is specified with a tolerance of ±0.001 mm, suitable for applications that require high repeatability. What are the physical dimensions of the pin? The pin has a nominal diameter of 1.74 mm and a length of 50 mm. Which material is used for the pin? This gauge pin is made from special steel chosen for mechanical resilience in workshop use. Is the pin supplied as a single item or in sets? The M323.174 is supplied as a single-piece test pin for individual use in fixture and reference tasks. For which applications is this pin intended? The pin serves as a reference for end-measurements, go/no-go checks and fixture alignment in inspection and workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.75mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, ±0.001 mm tolerance and a compact 50 mm length for reproducible end‑measure checks; order the item from Metav Werkzeuge or consult our specialists for application guidance. Gauge pin M323.175 – single test pin, 1.75 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The Gauge pin M323.175 is a workshop‑grade single test pin intended for precise end‑measurement and reference checks in machining and assembly environments. Workshop‑grade construction Tolerance ±0.001 mm Diameter 1.75 mm Length 50 mm Micrometre precision for inspection and gauging Manufactured for tasks that demand high repeatability, this gauge pin delivers a nominal tolerance of ±0.001 mm (1 µm), which places it in the realm of fine verification and end‑dimension control. The tight tolerance reduces ambiguity in pass/fail assessments on small bores and precision fittings, enabling quicker decisions on in‑process checks. Where measurements must be both reliable and traceable, the narrow tolerance provides a clear, objective basis for quality documentation. Compact design that suits workshop workflows With a diameter of 1.75 mm and a length of 50 mm, the component is designed for easy handling and quick insertion into small assemblies or gauges. The item is specified as a workshop version, offering a pragmatic balance between precision and everyday robustness. Constructed from special steel, the pin maintains dimensional stability under regular use and resists surface wear common in busy inspection benches, which supports consistent measurement results over repeated cycles. Practical integration into quality routines The slim form factor and fine accuracy make this test pin ideal as a reference element in fixture set‑ups, end‑measure controls and comparative checks during production runs. Lightweight and compact, it is straightforward to store in tool cabinets or measurement sets and to incorporate into existing inspection jigs. Supplied as a single unit, the pin suits operations that require selective replacement or the addition of targeted reference points without overhauling established metrology equipment. Contact Metav Werkzeuge for application advice on the M323.175 gauge pin and to arrange fast supply from Emmerich — our consultants help match the right precision element to each inspection task Technical data Article number: M323.175 GTIN: 4061905054730 Brand: Metav IndustryLine Facts Diameter: 1.75 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Version: Workshop‑grade Single test pin for end‑measure checks FAQ What level of precision does this test pin provide? The gauge pin M323.175 from Metav IndustryLine delivers a tolerance of ±0.001 mm, offering micrometre‑level precision suitable for fine inspection work. For which applications is the M323.175 recommended? This single test pin is intended for end‑measurement and reference checks in machining, assembly and small‑bore verification tasks where tight dimensional control is required. What is the material of the pin and why does it matter? The component is made from special steel, chosen for its dimensional stability and wear characteristics that support repeated inspection use. Is the M323.175 supplied as a set or individually? The product is supplied as a single test pin (individual item) to enable selective use within existing inspection kits or fixtures. Can this pin be used in fixture setups and jigs? Yes, the compact diameter and 50 mm length make it well suited for incorporation into precision fixtures, gauge assemblies and comparative measurement set‑ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.76mm Gauge Pin, ±0.001mm Precision, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of a 1.76 mm diameter with an ultra‑tight ±0.001 mm tolerance and a 50 mm overall length for repeatable end‑measure checks; the workshop‑grade construction and delivery in a protective case protect the pin during transport and storage. Order the M323.176 directly via Metav Werkzeuge or contact the consultants for application advice. M323.176 gauge pin, 1.76 mm ±0.001 mm, 50 mm (Metav IndustryLine) The M323.176 gauge pin is a workshop‑grade inspection pin designed for precise end‑measure and locating checks in compact metrology routines. Precision diameter 1.76 mm Tight tolerance ±0.001 mm Length 50 mm workshop version Special steel with protective case Consistent measurement precision for repeatable checks The gauge pin delivers an exceptionally tight tolerance of ±0.001 mm, providing the dimensional certainty required in high‑accuracy inspection tasks. This level of precision reduces retesting and rejects by ensuring that a go/no‑go or reference measurement is stable across repeated operations. The small diameter and rigid construction make the pin especially suitable for tight bores, small locating holes and precision fixture alignment. By translating the pin's dimensional stability into fewer downstream corrections, production flow benefits from predictable quality control results. Compact design tailored to micro metrology applications Classified in the micro range (measurement range up to 10–100 mm), this inspection pin is engineered for finework where space and stiffness matter. The combination of a 50 mm shaft and a nominal diameter of 1.76 mm means the component is easy to manoeuvre into confined features while retaining the straightness needed for accurate end‑gauging. The special steel construction balances wear resistance with manufacturing tolerances, so the element remains serviceable for routine shop use. Delivery in a protective case helps prevent contamination and mechanical damage during storage and transport. Integrates into inspection and gauge setups with minimal effort As a single, workshop‑grade gauge pin, the component is intended for straightforward integration into existing gauge blocks, pin jigs and fixture sets. Its compact form factor simplifies handling and rapid substitution during inspection cycles, supporting efficient quality control without complex adaptation. For tasks that require exact reference lengths or pinpoint locating, the pin functions as a stable datum that shortens set‑up time and increases throughput. Clear, reproducible reference points contribute directly to reduced cycle time and improved process capability. For workshop inspection needs, contact Metav Werkzeuge for technical guidance and ordering of the M323.176 gauge pin — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.176 GTIN: 4061905054747 Weight: 0.004 kg Material: Special steel Length: 50 mm Facts Diameter: 1.76 mm Accuracy: ±0.001 mm Category: Gauge pins / Test pins Special features Workshop version Delivered in protective case Suitable for compact bore and locating checks FAQ What diameter and tolerance does this gauge pin offer? The M323.176 gauge pin is specified with a diameter of 1.76 mm and an accuracy of ±0.001 mm. Is the pin suitable for fine bore inspection and fixture locating? Yes; its small diameter and rigid 50 mm length make the pin ideal for compact bore gauging and precise locating tasks in workshop environments. What material is the pin made from and how does that affect wear? The pin is manufactured from special steel, chosen to provide a balance of hardness and wear resistance appropriate for routine inspection use. Does the delivery include protective transport packaging? The pin is supplied in a protective case to safeguard the component during transport and storage. Can this gauge pin be used with standard pin jig and gauge block systems? Yes; the pin’s dimensions and workshop specification allow straightforward integration with common gauge block and pin jig setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.77mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
High-precision workshop gauge pin with ±0.001 mm tolerance and a compact 1.77 mm diameter for reliable end-measure checks; the 50 mm length provides secure seating and reach in confined assemblies. Robust special steel construction supports repeatable inspections and stable handling. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single 1.77 mm — ±0.001 mm accuracy (Metav IndustryLine) The gauge pin is a workshop-grade test pin intended for precise dimensional checks and end-measure applications in assembly and inspection tasks Workshop-grade construction Tolerance ±0.001 mm Diameter 1.77 mm Length 50 mm for deep access Achieve repeatable results with micron-level tolerance The compact test pin delivers a certified ±0.001 mm tolerance, offering inspection accuracy at the micron scale for small bores, fit checks and reference tooling. This level of control reduces measurement scatter and supports traceable process checks in production and QA environments. By combining tight specification with a simple single-pin design, the component facilitates fast go/no-go and comparative checks while preserving measurement integrity and repeatability. Built for workshop conditions and secure handling Designed as a workshop-grade tool, the pin uses special steel to balance toughness and dimensional stability during routine use. The 50 mm length allows access to recessed seats and provides a convenient grip for manual handling or fixture mounting. At a slender 1.77 mm diameter the pin is ideal where space is limited but reliable seating is required; its form factor makes it suitable for insertion gauges, pin arrays and alignment jigs where consistent contact geometry matters. Integrates into inspection workflows and end-measure applications As a single precision test pin intended for end measures, the component fits naturally into established inspection routines — for example, insertion into bore gauges, use as a reference master or in fixture set-up. Labelling and traceability are supported by the supplied SKU and GTIN, enabling inventory control and clear documentation within quality systems. The simple geometry minimises interpretation effort during inspections and allows quick comparison against tolerance thresholds. Practical advantages for production and maintenance The minimal design reduces maintenance overhead: when storage and handling are controlled, the pin retains its performance over long service intervals. Its compact mass and standard dimensions simplify integration into existing tool kits and make replacement straightforward. The workshop specification emphasises robustness without sacrificing precision, helping to ensure consistent component checks across shifts and operators. Choose Metav IndustryLine gauge pins for dependable inspection performance and contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.177 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 1,77mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 1.77 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Special features Workshop version Material: Special steel Single test/gauge pin GTIN: 4061905054754 FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.177 is specified to ±0.001 mm, providing micron-level control for precise inspection tasks. Is this pin suitable for end-measure applications? Yes, the pin is intended for end-measure (endmasse) checks and is practical for insertion into small bores or seating in fixtures. What material is the pin made from? The pin is manufactured from special steel, selected to combine dimensional stability with workshop durability. Can this pin be used in assembly fixtures and jigs? The compact geometry and 50 mm length make the pin suitable for fixture mounting, alignment jigs and pin arrays used in production setups. How is the product identified for ordering and traceability? The SKU M323.177 and GTIN 4061905054754 identify this single gauge pin for procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.78mm Gauge Pin ±0.001 mm Length 50 mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of ±0.001 mm dimensional accuracy, a compact 1.78 mm diameter and a durable 50 mm length for repeatable end‑measurement and alignment tasks; delivered ready for transport in a protective case. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.178 — 1.78 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.178 is a workshop‑grade inspection pin designed for precise end‑measurements, fit checks and alignment tasks in assembly and quality control environments. Diameter 1.78 mm, tolerance ±0.001 mm Length 50 mm for deep bores Special‑steel construction Delivered in protective case Reduce rework with micrometric repeatability The exceptionally tight ±0.001 mm tolerance (1 µm) of this inspection pin ensures measurable reductions in dimensional uncertainty during routine checks. Accuracy at this level converts directly into fewer rejected parts and less rework, because a reliably calibrated reference pin gives a clear go/no‑go condition for small bore diameters. The compact diameter is ideal where space is limited yet precision remains essential; the hardened shaft maintains roundness under repeated insertion, supporting consistent results across inspection cycles. Bold, verifiable tolerances make specification and documentation straightforward for quality records. Built for workshop handling and durability Constructed from special steel, this workshop‑grade test pin balances wear resistance with the dimensionally stable finish necessary for repeated gauging. The 50 mm shank provides sufficient engagement in moderate‑depth bores while keeping the tool easy to manoeuvre by hand or with light fixtures. Supplied in a protective case, the pin is protected from transport damage and contamination, preserving the measuring surface and minimising downtime for cleaning or dressing. The simple geometry of the pin also facilitates fast visual inspection for wear before use, helping to maintain inspection integrity over time. Practical use in inspection and assembly workflows This small‑diameter gauge is intended for end‑measurement, alignment verification and fit checks in component assembly and precision cleaning processes. The smooth, calibrated shaft functions as a reliable reference for gauging internal diameters, for locating features during assembly and for checking concentricity in small parts. Lightweight and compact, the pin integrates easily into quality control benches and fixture setups; traceable identification (SKU M323.178) simplifies inventory and audit processes. For operations that prioritise stable short‑range measurements, this inspection pin provides a pragmatic balance of precision and handling efficiency. For procurement or technical application support related to the Metav IndustryLine gauge pin, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for purchase and specification guidance. Technical data Article number: M323.178 (SKU) GTIN: 4061905054761 Brand: Metav IndustryLine Material: Special steel Tolerance: ±0.001 mm Diameter: 1.78 mm Length: 50 mm Weight: 0.004 kg Facts Tolerance in micrometres: 1 µm Length in millimetres: 50 mm Diameter in millimetres: 1.78 mm Weight in kilograms: 0.004 kg Special features Workshop version Supplied in protective case for transport Compact diameter for confined bores Smooth, hardened measuring surface FAQ What tolerances does the gauge pin meet and how precise is it? The gauge pin M323.178 is specified to ±0.001 mm (1 µm), providing micrometric accuracy suitable for precise end‑measurement and fit verification. Which materials is the pin made from and how does that affect wear? The pin is manufactured from special steel, offering a hard, wear‑resistant surface that maintains dimensional stability under repeated use. Is the pin delivered ready for transport and storage? Yes, the inspection pin is supplied in a protective case, which protects the measuring surface during transport and storage. For which tasks is this small‑diameter pin particularly suitable? This compact gauge is ideal for end‑measurement, bore checks, alignment and fit verification in small components and assembly processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.79mm Test Pin ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Benefit from micron‑level repeatability, workshop‑grade construction and compact geometry for reliable end‑measurements in inspection and set‑up tasks. The combination of 1.79 mm nominal diameter, ±0.001 mm accuracy and a 50 mm length supports consistent results and efficient quality checks; order the gauge pin directly via Metav Werkzeuge or request specialist advice from our consultants. Gauge pin M323.179 — 1.79 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.179 designed for precision end‑measurements and workshop inspection, ideal for small‑bore checks and reference measurements 1.79 mm nominal diameter ±0.001 mm tolerance 50 mm hardened workshop length Special‑steel construction for wear resistance Supplied in protective transport case High‑precision measurement for dependable process control The gauge pin delivers ±0.001 mm tolerance, equating to a 1‑micrometre resolution that significantly reduces uncertainty in go/no‑go checks and reference comparisons. This level of accuracy supports reproducible set‑ups and shortens inspection cycles, which in turn improves throughput and reduces scrap rates. The metric nominal size of 1.79 mm is well suited to fine‑bore verification and end‑measure references in precision workshops. Durable workshop design for frequent handling Manufactured in special steel and offered in a workshop version, the pin resists everyday wear while keeping true to its nominal dimension. The 50 mm length provides a practical balance between reach and rigidity, making the component stable in measuring stands or handheld checks. Supplied in a protective transport case, the pin arrives ready for immediate use and is protected against impact and contamination during storage and transport. Practical benefits and application clarity Compact geometry and tight tolerance make the pin appropriate as a master reference for small diameters, for setting gauges or verifying bore sizes on jigs and fixtures. The low mass and short length reduce the risk of deflection, ensuring repeatability in serial checks. The robust finish facilitates easy cleaning and maintenance, extending service life and maintaining measurement integrity over many cycles. Choose the Metav IndustryLine M323.179 for precise end‑measurement tasks and contact Metav Werkzeuge for delivery from Emmerich or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.179 GTIN: 4061905054778 Manufacturer: Metav IndustryLine Material: Spezial‑Stahl Nominal diameter: 1.79 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.004 kg Facts Diameter: 1.79 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Workshop version Supplied in protective transport case Application: end measurements FAQ What is the intended application for this gauge pin? The gauge pin M323.179 from Metav IndustryLine is intended for precision end‑measurements, small‑bore verification and use as a reference pin in workshop inspection and set‑up tasks. How tight is the tolerance and what does it mean for inspections? With a tolerance of ±0.001 mm, the M323.179 provides micrometre‑level repeatability, enabling reliable go/no‑go checks and reference comparisons in quality control. Is the pin suitable for frequent workshop use? Yes. The workshop version is made from special steel and designed for wear resistance and regular handling during serial inspection tasks. Does the product arrive ready for storage and transport? The gauge pin is supplied in a protective transport case to shield the component from impact and contamination during handling and storage. Can this pin be used as a master reference for gauge setting? The dimensional stability and 1‑micrometre tolerance make the M323.179 appropriate as a master reference for setting small‑diameter gauges and verifying fixture bores. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.7mm Test Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometric accuracy, a robust workshop design, and compact dimensions for clear end‑measurement decisions in production and inspection. Benefit from a precisely manufactured gauge pin with a 1.70 mm diameter, ±0.001 mm tolerance and 50 mm length—order directly via Metav Werkzeuge or consult our specialists for integration advice. M323.170 test pin — gauge pin, 1.70 mm Ø, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.170 test pin is a single, workshop‑grade gauge pin designed for precise end‑measure checks and fine inspection tasks in toolmaking and series production. ±0.001 mm micrometre tolerance Ø 1.70 mm hardened special steel 50 mm overall length for accessible checks Micrometric accuracy for decisive end‑measurement The ±0.001 mm tolerance positions this gauge pin in the high‑precision range suitable for critical go/no‑go checks and dimensional verification of small features. Such a fine tolerance reduces ambiguity in pass/fail decisions during incoming inspection or final quality control, improving throughput by cutting retesting and rework. The diameter of 1.70 mm and the single‑piece configuration provide a stable reference for bore checks and plug‑gauge applications; the result is repeatable measurements that feed reliable data into process control procedures. Robust, workshop‑ready construction that lasts Produced in special steel and labelled as a workshop edition, the pin is engineered to withstand routine handling and the contact stresses typical of shop environments. The 50 mm overall length gives access into deeper features without sacrificing axial stiffness, while the compact diameter supports measurements in narrow bores and delicate fixtures. The combination of material choice and workshop specification ensures wear resistance and dimensional stability across many cycles, which preserves calibration intervals and supports long‑term reproducibility. Designed to integrate with inspection workflows As a compact gauge pin, this item fits into standard test benches, fixture blocks and comparator setups where precise end‑measure dimensions are required. Marked and traceable via the provided identifiers, the component simplifies inventory control and replacement planning. The product is appropriate for metrology labs, jigs and fixture maintenance, and quality gates on the production line; it serves well where a definitive, high‑resolution reference is needed for small feature assessment. For reliable, workshop‑grade micron verification choose the Metav IndustryLine M323.170 from Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for specific integration guidance. Technical data Article number: M323.170 GTIN: 4061905055843 Manufacturer: Metav IndustryLine SKU: M323.170 Facts Diameter: 1.70 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Accuracy specification: ±0.001 Special features Material: special steel Version: workshop edition Category: gauge pin / test pin Intended use: end‑measurement / plug‑gauge applications FAQ What applications suit this gauge pin best? This test pin is intended for end‑measurement tasks such as bore checks, plug‑gauge checks and fixture verifications; the M323.170 from Metav IndustryLine is particularly suited to small‑feature inspections. Is the dimensional tolerance of ±0.001 mm achievable in routine shop use? When used in a stable fixture and handled consistently, the ±0.001 mm tolerance of the M323.170 delivers reproducible results that support reliable pass/fail decisions. Which materials can be inspected with this pin? The gauge pin itself is made of special steel and is suitable as a reference for inspecting components of common engineering materials; selection of mating materials should follow standard practice to avoid undue wear. Can the pin be used in automated measurement rigs? Yes, the compact form and defined geometry of the M323.170 make it compatible with automatic fixtures and test benches for inline or near‑line verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.81mm Gauge Pin, ±0.001mm Tolerance, 50mm Length, Workshop Version In Plastic Case - Metav IndustryLine
Benefit from the combination of workshop‑grade robustness, sub‑micron accuracy (±0.001 mm) and a compact 50 mm length for reliable end‑measurements; order the pin directly via Metav Werkzeuge or contact our consultants for technical advice. Test pin M323.181 – single 1.81 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A Test pin for precise end‑measurement and inspection in workshop metrology, designed as a resilient workshop version for routine gauging tasks Workshop‑grade design for daily use Diameter 1.81 mm with ±0.001 mm accuracy 50 mm hardened special steel shaft Supplied in transport box for safe handling Reduce rework through measurable precision The M323.181 provides ±0.001 mm tolerance (equivalent to 1 μm) on a slender 1.81 mm diameter shaft, reducing measurement uncertainty in tight fits and fine bores. Such sub‑micron accuracy turns subjective checks into objective results, which speeds up root‑cause analysis and cuts reject rates. The narrow diameter and short 50 mm overall length support repeatable contact with minimal deflection, making the pin suitable for end‑of‑line verification and precision gauging in small assemblies. Designed for busy workshop conditions Built as a workshop‑grade tool, the pin balances hardness and toughness by using special steel, offering resistance to wear during frequent use. The robust finish and compact form factor make handling straightforward on the shop floor while preserving the measured tolerance. Supplied in a transport box, the component arrives protected for transfer between workstations or storage, reducing the risk of nicks that would affect accuracy. Practical integration into inspection workflows The pin suits use as a reference probe for fixture checks, pin‑gauge complements and end‑measurement routines where a defined cylindrical datum is required. Lightweight at approximately 0.004 kg, the test pin is easy to mount in holders or gauge sets without imposing additional inertia. Clear identification with the M323.181 code and GTIN ensures traceability in tool cabinets and inspection reports, supporting organised quality documentation and batch tracking. Choose the Metav IndustryLine M323.181 test pin for reliable sub‑micron inspection and contact Metav Werkzeuge in Emmerich for ordering and application guidance Technical data Article number: M323.181 GTIN: 4061905054792 Label: Test pin, single, 1.81 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 1.81 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Materials & special features Material: Special steel Version: Workshop execution Packaging: Supplied in transport box SKU: M323.181 FAQ What is the dimensional tolerance of this test pin? The M323.181 test pin offers a tolerance of ±0.001 mm (1 μm), suitable for high‑precision gauging and fine bore verification. Which material is used for the pin and what does that mean for wear? The pin is made from special steel; this provides a balance of hardness and toughness for durable performance in workshop environments. How is the test pin supplied for transport and storage? The pin is supplied in a transport box to protect the shaft during handling and transfer between workstations. Can this pin be used in fixture checks and gauging sets? Yes; the compact 50 mm length and precise diameter make it suitable for fixture alignment, pin‑gauge complements and end‑measurement applications. How is the product identified for inventory and traceability? Identification is via the SKU M323.181 and GTIN 4061905054792, which supports clear traceability in inspection records and stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.82mm Gauge Pin ±0.001mm Length 50mm Workshop Version in Special Steel - Metav IndustryLine
Take advantage of the combination of extreme measurement accuracy, compact dimensions and a workshop-grade design for reliable end-measure verification; order the test pin directly via Metav Werkzeuge or ask the consultants if needed. M323.182 Test Pin — 1.82 mm diameter, ±0.001 mm accuracy (50 mm length, Metav IndustryLine) The M323.182 Test Pin is a workshop-grade inspection pin intended for precise end-measure verification and fixture checking in gauges and control equipment. Workshop-grade construction Accuracy ±0.001 mm Diameter 1.82 mm for fine inspection Length 50 mm, special steel Precision engineered for repeatable measurement The M323.182 test pin is specified for an accuracy of ±0.001 mm, a tolerance class that supports high-precision comparison tasks and tight go/no-go verifications. The 1.82 mm nominal diameter and 50 mm overall length make this probe suitable for confined inspection points and for use as an end measure in small gauges. In practical terms, the sub-millimetre tolerance reduces measurement uncertainty when used as a reference element in comparative checks, enabling consistent pass/fail decisions in small-part production and quality control. Robust workshop build for frequent handling Manufactured in special steel, the probe offers a balance of wear resistance and dimensional stability appropriate for everyday shop use. The component’s low mass (approx. 4 g) contributes to easy handling and fast fixture changes without compromising stiffness for short-span measurements. The workshop-grade execution emphasises practical durability and repeatability under regular contact inspection routines, making the pin a dependable element for production metrology and fixture-based controls. Designed for seamless integration into inspection setups The slim profile and tight tolerance of this inspection pin simplify incorporation into plug gauges, pin gauges and bespoke checking fixtures where accurate end dimensions are required. As a single-pin item, the component can serve as a calibrated reference in comparative arrangements or as a replacement element in modular gauge systems. The clear technical specification—±0.001 mm, 1.82 mm diameter, 50 mm length—permits straightforward planning for traceable workflows and supports quality protocols that depend on repeatable mechanical references. For tailored advice, availability and to arrange procurement through Metav Werkzeuge, please reach out to our specialists at Metav Werkzeuge for precise ordering and application guidance. Technical Data Article number: M323.182 GTIN: 4061905054808 Brand: Metav IndustryLine Facts Diameter: 1.82 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Version: workshop-grade execution Category: Test pins FAQ What tolerance does this test pin offer? The M323.182 test pin is specified with an accuracy of ±0.001 mm, suitable for high-precision comparative checks and tight inspection limits. For which inspection tasks is this probe suitable? Its 1.82 mm diameter and 50 mm length make the probe suitable for end-measure verification, plug-gauge inserts and confined measurement points in small-part production. Is the supply status regarding calibration stated for this item? The product listing for the M323.182 test pin does not specify whether a calibration certificate is supplied with the standard item. What material is used for the probe? This inspection pin is made from special steel, selected for its balance of wear resistance and dimensional stability in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.83mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of laboratory-level tolerance and workshop-hardened construction for reliable gauge work and repeatable inspections. The built-in accuracy of ±0.001 mm together with a 1.83 mm diameter shaft and a 50 mm length ensures consistent end‑measure performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.183 — Precision test pin, 1.83 mm, ±0.001 mm (Metav IndustryLine) The Test pin M323.183 is a workshop-grade precision probe designed for end‑master measurement, gauge inspection and fixture checking in manufacturing and inspection environments. Precision tolerance ±0.001 mm Diameter 1.83 mm for fine probing 50 mm hardened special-steel shaft Supplied in protective transport case Repeatable, measurable precision for routine inspection The probe is engineered for repeatability in routine gauging tasks: with a verified tolerance of ±0.001 mm, the pin delivers measurement stability that bridges handheld checks and bench inspection. The small 1.83 mm shaft is ideal for narrow bore verification and contact points where minimal intrusion is required. Because the manufacturing tolerance is specified to the micrometre level, the pin serves as a reliable reference in serial checks and gauge sets, reducing rework and supporting consistent quality control procedures. Built for the workshop — durability meets fine accuracy Combining a special steel shaft with a workshop specification, this test pin stands up to the mechanical demands of daily use. The 50 mm length provides sufficient reach for many fixturing scenarios while keeping the probe stiff to avoid bending errors. A protective transport case is supplied to safeguard the probe between uses, preserving the ground tip and the calibrated geometry. The result is a tool that balances robustness and precision, suitable for inspectors and machinists who require dependable performance on the shop floor. Simple integration into inspection routines The slender form factor and standard dimensions make the pin straightforward to incorporate into existing plug gauges, inspection jigs and pin assemblies. As a single, calibrated probe it can be used as a substitute for worn elements in gauge blocks or as a repeatable touchpoint in comparative testing rigs. Traceability is supported through clear labelling and part identification, facilitating record keeping in quality systems and production logs. Practical benefits and operational confidence Using a high‑tolerance probe reduces measurement uncertainty at critical contact locations and shortens diagnostic cycles when troubleshooting tooling or assembly fit. The workshop version construction means less downtime due to wear, and the transport case reduces handling damage during storage or transit. For operations that value consistent pass/fail decisions, this pin offers a compelling mix of accuracy and operational resilience. For precise gauge work choose the Metav IndustryLine test pin and contact Metav Werkzeuge in Emmerich for availability and application guidance — reliable stock and expert advice from Metav Werkzeuge are ready to assist. Technical data Article number: M323.183 SKU: M323.183 GTIN: 4061905054815 Label: Test pin, single, 1.83 mm, ±0.001 mm, length 50 mm Core specifications Diameter: 1.83 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Version: Workshop version Delivery: Supplied in transport case Category: Measuring pins Accuracy class: ±0.001 FAQ What is the intended use for this test pin? The test pin M323.183 (Metav IndustryLine) is intended for end‑measure checks, gauge inspection and fixture contact points where a slim, high‑accuracy probe is required. Is the pin suitable for repeated workshop use? Yes, the workshop version is manufactured from special steel and is supplied in a protective transport case to withstand regular handling and preserve geometry. What tolerance can be expected from the probe? The probe is specified to an accuracy of ±0.001 mm, making it suitable for high‑precision inspection tasks and repeatable shop measurements. Can the pin be used in plug gauges and jigs? The 1.83 mm diameter and 50 mm length are compatible with common pin holders and inspection jigs; the pin is suitable for direct integration into such fixtures. Which SKU identifies this product for ordering? Order reference: M323.183 (Test pin, Metav IndustryLine) Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.84mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Ensure reproducible reference measurements with a compact, high‑accuracy gauge pin: 1.84 mm diameter with a tolerance of ±0.001 mm and a 50 mm shank for stable end‑measurement. Order this precision gauge pin directly via Metav Werkzeuge or ask the consultants for specification support. Precision Gauge Pin M323.184 — single test pin, 1.84 mm diameter, ±0.001 mm (Metav IndustryLine) the Precision Gauge Pin M323.184 is a workshop‑grade reference pin designed for high‑precision bore and end‑measurement tasks in small components and inspection fixtures Workshop‑grade precision tolerance ±0.001 mm Diameter 1.84 mm for fine bore checks 50 mm hardened special‑steel shank Compact single‑pin format for reference checks Stable reference for tight tolerance checks The compact round gauge offers a reproducible reference with ±0.001 mm tolerance, making it suitable where low measurement uncertainty is essential. With a nominal diameter of 1.84 mm, the pin functions as a reliable go/no‑go reference in comparative checks and fixture set‑up. The combination of small diameter and minimal form deviation reduces the influence of seating errors, which stabilises process control and shortens inspection cycles. Durable build for everyday workshop use Manufactured from special steel and finished for workshop conditions, the shaft provides a wear‑resistant contact surface across repeated measurements. The 50 mm length balances handling convenience and engagement depth in small bores, so the pin can be used as a reference in both manual gauges and fixture‑mounted checks. Robust construction and careful finishing extend service life, lowering replacement frequency and supporting continuous production. Seamless integration into inspection routines As a single‑unit reference pin, the component simplifies calibration tasks and spot checks within existing metrology setups. The compact design eases handling in confined assemblies and complements sets of precision pins for incremental sizing or limit checks. Supplied with traceable identifiers, the item supports organised inventory management and direct ordering through Metav IndustryLine for reliable re‑supply. Contact Metav Werkzeuge for tailored advice and fast supply of the Metav IndustryLine precision gauge pin M323.184 Technical data SKU: M323.184 GTIN: 4061905054822 Description: Test pin, single, 1.84 mm, ±0.001 mm, length 50 mm Weight: 0.004 kg Facts Diameter: 1.84 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop version Category: Gauge pins Eclass: 21170231 FAQ What tolerance does this gauge pin offer? The Metav IndustryLine gauge pin M323.184 is manufactured to a tolerance of ±0.001 mm, suitable for precision comparative and end‑measurement tasks. What are the pin's dimensions and form? The pin has a nominal diameter of 1.84 mm and a usable shank length of 50 mm, supplied as a single precision reference pin. Which material is used for the pin? The pin is made from special steel, selected for wear resistance and stable contact behaviour in routine workshop inspections. How is the pin typically used in inspection processes? This precision pin is used as a reference for bore verification, fixture set‑up and comparative checks where small‑diameter control is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com