Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
1/2" x 28 UNEF Thread Go Gauge, Right-Hand, Hardened Gauge Steel, ANSI/ASME B1.1 2B - Metav IndustryLine
Take advantage of precise go/no-go verification, conformity to ANSI/ASME B1.1, and durable hardened gauge steel for reliable in‑line inspection and acceptance testing. Order the gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread plug gauge UNEF, 1/2" x 28 (ANSI/ASME B1.1) — 2B tolerance A Thread plug gauge UNEF, 1/2" x 28 (2B) designed for fast verification of internal thread conformity in production, quality control and inspection workflows ANSI/ASME B1.1 compliant Hardened gauge steel construction Right-hand thread, 2B tolerance Conformity checks that keep production moving The plug gauge is engineered for straightforward, repeatable inspection of internal threads according to ANSI/ASME B1.1, providing a clear accept/reject result that reduces time-consuming rework. The 1/2" x 28 TPI geometry with 2B tolerance corresponds to standard UNC/UNEF internal thread practice, making the gauge suitable for batch testing and incoming inspection. By giving immediate verification, the tool supports efficient process control and helps maintain throughput on assembly lines. Durability and dimensional stability for frequent use Manufactured from hardened gauge steel, the gauge resists wear from repeated engagement and preserves dimensional stability over many cycles. The right-hand thread geometry and robust finishing mean surface integrity is maintained, reducing the need for frequent replacement. The compact, well-balanced form allows quick handling on the shop floor and accurate tactile feedback during go/no-go checks, so inspection teams can work with confidence and minimal downtime. Practical fit for workshops and quality labs Built for everyday use in machine shops, inspection benches and tool rooms, this plug gauge combines clear standard compliance with pragmatic workshop resilience. As part of the Metav IndustryLine, the item benefits from a supply chain and quality filter based in Emmerich that serves over 48,000 customers and a broad portfolio of precision products. The result is accessible precision: a reliable gauge for both small repair shops and larger production facilities that need consistent thread verification without compromise. For a tailored recommendation from Metav IndustryLine and to place an order, contact Metav Werkzeuge for technical advice and procurement at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.924.EF GTIN: 4054469179629 Manufacturer: Metav IndustryLine Core specifications Thread size: 1/2" x 28 TPI Pitch: 28 TPI Tolerance class: 2B Weight: 0.2 kg Features / Standards Right-hand thread Material: hardened gauge steel Standard: ANSI/ASME B1.1/B1.2 Customs tariff number: 90173000 FAQ What thread form and size does this gauge check? The gauge checks a UNEF internal thread sized 1/2" x 28 TPI, manufactured to the 2B tolerance class in accordance with ANSI/ASME B1.1. Is the gauge suitable for production line testing? Yes, the Thread plug gauge UNEF, 1/2" x 28 (2B) from Metav IndustryLine is intended for fast go/no-go checks in production and quality control environments. What material is the gauge made from? The gauge is made of hardened gauge steel, chosen for wear resistance and long-term dimensional stability during repeated inspections. Does the gauge indicate handedness or thread direction? The tool is supplied with a right-hand thread configuration, appropriate for standard right-hand internal threads. How is conformity to standards ensured? Conformity is provided by design and manufacture to ANSI/ASME B1.1/B1.2, ensuring the gauge matches commonly accepted thread forms and tolerances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/4" 20 TPI Thread Go Ring Gauge UNC ANSI B1.1 2A Hardened Gauge Steel - Metav IndustryLine
Taking advantage of ANSI/ASME B1.1 conformity, hardened gauge steel construction and a defined 2A GO tolerance ensures reliable acceptance testing of UNC threads; order this ring gauge directly via Metav Werkzeuge or consult our specialists for specification support. Thread ring gauge UNC GO, 1/4‑20 2A — GO ring gauge for UNC thread inspection (Metav IndustryLine) The Thread ring gauge UNC GO, 1/4 x 20 ANSI B1.1 / 2A is a precision acceptance gauge designed for fast, repeatable verification of 1/4‑20 UNC external threads in production and incoming‑goods inspection. ANSI/ASME B1.1 compliant GO gauge Tolerance class 2A for acceptance testing Hardened gauge steel for wear resistance Ensured conformity for production control A GO thread ring gauge in 1/4‑20 UNC provides a fast, unequivocal pass/fail check that fits directly into statistical process control and shop‑floor inspection routines. Built to ANSI/ASME B1.1, the gauge defines the maximum material condition for acceptable external threads; the 2A tolerance class means the thread is checked against the specified allowance and pitch form for the UNC series. Using a dedicated ring gauge reduces measurement interpretation, accelerates sample throughput and lowers scrap rates by ensuring only parts within the defined envelope proceed to assembly. Durable construction for repetitive use Manufactured from hardened gauge steel, the ring resists wear from repeated engagement and maintains its functional limits over long inspection runs. The compact design and low mass make handling straightforward while retaining the stiffness necessary for repeatable seating on the thread. Material selection and hardening are decisive for lifetime cost; a rugged gauge reduces rework and replacement cycles, improving overall process efficiency. The lightweight profile (approximately 0.1 kg) supports ergonomic inspection workflows without compromising stability. Practical use and integration into quality systems The gauge is intended for use in routine acceptance checks, manual go/no‑go inspection stations and portable inspection kits. Its compliance with ANSI/ASME B1.1/B1.2 allows direct comparison with specification sheets and drawing notes, simplifying documentation for quality records. Where formal traceability is required, the ring can be referenced in inspection reports as the functional test instrument for the 1/4‑20 UNC thread. For workshops and manufacturing lines seeking clear, rapid decisions on thread conformity, this GO ring offers a straightforward, standards‑based solution. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine GO ring gauge can be integrated into existing inspection plans or to request further specification details and availability. Technical Data Article number: M315.950 GTIN: 4054469180151 Label: Gewinde-Lehrring UNC GO, 1/4 x 20 ANSI B1.1 / 2A Mass / size: 1/4" Thread pitch: 20 Tolerance class: 2A Material: Lehrenstahl, hardened Standard: ANSI/ASME B1.1/B1.2 Weight: 0.1 kg Facts Thread series: UNC Function: GO (acceptance) ring gauge Application: Production inspection, incoming goods Category: Gauges / Thread inspection Special features Hardened gauge steel construction Metav IndustryLine product Suitable for assembly acceptance testing Compact, ergonomic form factor FAQ What does the 2A tolerance class indicate for this gauge? The 2A tolerance class denotes the specified allowance and pitch form for external UNC threads; this gauge checks conformance to that class for 1/4‑20 UNC parts. Is this gauge suitable for production testing of 1/4‑20 UNC fasteners? Yes, the Thread ring gauge UNC GO, 1/4 x 20 ANSI B1.1 / 2A is intended for rapid production acceptance testing of 1/4‑20 UNC external threads. Which standard does the ring gauge follow? The gauge is manufactured to ANSI/ASME B1.1/B1.2, enabling direct use against ANSI UNC thread specifications. What material is used and why is it important? The ring is made from hardened gauge steel, chosen to resist wear from repeated engagement and preserve functional limits over many inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/4" 20 TPI UNC Nogo Thread Gauge, Hardened Steel, ANSI/ASME B1.1/B1.2 - Metav IndustryLine
Take advantage of precise, standards‑compliant thread inspection with a hardened gauge‑steel NOGO ring and verified ANSI/ASME conformity; this compact control tool minimises false acceptance and supports repeatable quality control at the production line. Order the gauge directly via Metav Werkzeuge or contact their specialists for application advice. Gewinde-Lehrring UNC NOGO, 1/4 x 20 ANSI B1.1 / 2A — NOGO thread ring, hardened gauge steel, ANSI/ASME compliant The Gewinde-Lehrring UNC NOGO, 1/4 x 20 ANSI B1.1 / 2A is a dedicated NOGO thread ring intended for fast pass/fail inspection of 1/4‑20 UNC external threads in mechanical production and assembly processes ANSI/ASME B1.1/B1.2 compliance Hardened gauge steel construction NOGO ring for quick pass/fail inspection Rapid, reliable thread control for consistent production quality The NOGO ring serves as a simple, time‑efficient inspection device that determines whether an external thread falls outside permitted limits. By confirming rejection of out‑of‑tolerance threads without micrometres or visual interpretation, the gauge reduces cycle time at incoming inspection and on the shop floor. Constructed for repetitive use, the tool supports a lean quality workflow, enabling operators to focus on corrective action rather than measurement debate. Conformity and tolerance explained for traceable inspections Built to ANSI/ASME B1.1/B1.2, the ring enforces the dimensional limits associated with UNC 1/4‑20 thread geometry; the 2A tolerance denotes the external thread class and defines the acceptance envelope for major, minor and pitch diameters. Using a NOGO ring complements dimensional sampling by providing unequivocal Go/No‑Go evidence: if the ring does not screw on, the thread is within acceptable maximum material condition limits and can proceed to the next operation. This approach simplifies decision‑making in production and audit situations. Durable construction for long service life and low maintenance Made from hardened gauge steel, the ring resists wear and maintains form accuracy under frequent use, which prolongs service life and reduces the need for replacement gauges. The compact, robust design is suitable for inspection benches and portable control sets alike; its small mass and form factor enable quick handling during assembly checks. When stored and handled correctly, the gauge delivers consistent, repeatable results that protect against assembly failures and downstream rework. For assured thread inspection and application guidance for the Metav IndustryLine NOGO ring, contact Metav Werkzeuge in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability and delivery options Technical data SKU: M315.980 GTIN: 4054469180793 Label: Gewinde-Lehrring UNC NOGO, 1/4 x 20 ANSI B1.1 / 2A Facts Weight: 0.1 kg Thread size: 1/4" Pitch: 20 tpi Tolerance class: 2A Special features Material: hardened gauge steel Standard: ANSI/ASME B1.1/B1.2 Type: NOGO thread ring Category: Gauges / Lehren Manufacturer brand: Metav IndustryLine FAQ What is the primary purpose of this NOGO ring? The Gewinde-Lehrring UNC NOGO, 1/4 x 20 ANSI B1.1 / 2A is designed for fast pass/fail checks of 1/4‑20 UNC external threads to prevent out‑of‑tolerance parts entering assembly. What does the 2A tolerance class indicate? The 2A designation describes the external thread tolerance class under the ANSI/ASME system and defines the acceptable dimensional envelope for external UNC threads when using this gauge. Which standard governs the thread form for this gauge? This gauge is manufactured to the ANSI/ASME B1.1/B1.2 standard, matching the geometry and limits used for UNC 1/4‑20 threads. How durable is the gauge in regular production use? Constructed from hardened gauge steel, the ring offers high wear resistance and maintains dimensional stability under frequent use, supporting reliable pass/fail inspection over time. Can this NOGO ring be used for final assembly checks? Yes, the ring is suitable for shop‑floor and assembly‑line control to ensure external threads do not exceed permitted material conditions prior to mating operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/4" 20 UNC Thread Plug Gauge ANSI B1.1 2B, Hardened Gauge Steel - Metav IndustryLine
Benefit from a robust combination of hardened gauging steel and strict ANSI/ASME B1.1 compliance for repeatable internal thread verification; ideal for in‑line inspection and final acceptance tests. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge UNC 1/4-20 — ANSI/ASME B1.1, tolerance 2B (Metav IndustryLine) Thread plug gauge UNC 1/4-20 for quick verification of internal UNC threads, designed for workshop and production inspection tasks Hardened gauging steel construction Complies with ANSI/ASME B1.1 standard Thread size 1/4-20 UNC, 20 tpi Reliable verification for internal UNC threads The Thread plug gauge UNC 1/4-20 from Metav IndustryLine is engineered for consistent thread verification of internal UNC threads in production and quality control. Manufactured to the ANSI/ASME B1.1/B1.2 profile and delivered in tolerance class 2B, the gauge provides a clear go/no-go decision basis when used as part of acceptance testing. The compact design simplifies handling on the shop floor while ensuring that inspections are traceable and repeatable, supporting efficient process control in assembly and incoming inspection. Durable construction reduces downtime Made from hardened gauging steel, the gauge offers high wear resistance and long service life under frequent use. The robust material and precision machining preserve thread form and dimensional fidelity, translating into fewer replacements and less rework. A low mass and compact form factor make the tool easy to store and to integrate into inspection stations, while the material choice minimises corrosion and surface damage during routine handling, promoting reliable measurement performance over time. Fits into quality workflows and traceability systems This plug gauge is optimised for routine inspection tasks within production environments, incoming goods control and final inspection steps. The clear specification—1/4‑20 UNC, 20 tpi, 2B tolerance—simplifies documentation and procurement, and the SKU and GTIN support inventory and traceability procedures. When incorporated into an inspection plan, the gauge helps enforce part conformity to international thread standards, reducing assembly rejects and improving overall product quality. Request technical clarification or order supply from Metav Werkzeuge for Metav IndustryLine gauges — contact info@metav-werkzeuge.com or call +49 2822 7131930 for delivery and availability details Technical Data Article number: M315.920 GTIN: 4054469179513 Material: Gauging steel, hardened Standard: ANSI/ASME B1.1/B1.2 Thread size: 1/4" UNC Tolerance class: 2B Facts Weight: 0.1 kg Thread pitch: 20 tpi ECLASS: 21170214 Special features Category: Thread plug gauge (internal thread verification) Application: Inspection and acceptance testing of UNC threads Durable surface and wear resistance FAQ What is the primary purpose of this plug gauge? The plug gauge is intended for verification of internal UNC threads, providing a quick and reliable acceptance test for parts manufactured to ANSI/ASME B1.1 standards. Which thread specification does the gauge check? It checks 1/4-20 UNC threads with a pitch of 20 tpi and is manufactured to a 2B tolerance class for standard internal thread acceptance. What material is used and how does it affect durability? Constructed from hardened gauging steel, the gauge resists wear and maintains form under repeated use, ensuring long service life and stable inspection results. Can this gauge be used in incoming inspection and final assembly checks? Yes, the gauge is suitable for incoming goods inspection, in‑process checks and final assembly verification where adherence to ANSI/ASME B1.1/B1.2 is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/4" 28 TPI UNF Thread Go Plug Gauge Right-Hand ANSI B1.1 2B - Metav IndustryLine
Ensure consistent thread quality with a hardened gauge‑steel thread plug gauge for UNF 1/4 x 28 (ANSI/ASME B1.1), right‑hand and tolerance class 2B — robust construction and standards compliance for reliable production checks. Order the thread plug gauge directly via Metav Werkzeuge or consult the advisers for application matching. Thread plug gauge UNF 1/4 x 28 (ANSI/ASME B1.1) — hardened gauge steel, 2B A thread plug gauge UNF 1/4 x 28 (2B) designed for pass/fail verification of internal UNF threads to ANSI/ASME B1.1 in production, inspection and quality‑control environments. Hardened gauge steel construction ANSI/ASME B1.1 thread profile compliance Tolerance class 2B for internal threads Right‑hand UNF 1/4‑28 profile Secure, standards‑based verification for production lines Built to the ANSI/ASME B1.1 thread form, this plug gauge provides a straightforward method for pass/fail inspection of internal UNF threads. The hardened gauge steel body resists wear during repeated engagement, maintaining the reference profile so that thread checks remain consistent over time. By using a dedicated thread gauge with a defined tolerance class 2B, manufacturers reduce subjective judgement in assembly and inspection processes, which helps to lower rework rates and supports reproducible production outcomes. Durable handling and predictable performance The compact, lightweight construction (approx. 0.1 kg) makes the gauge easy to handle at the inspection bench while the hardened material sustains dimensional stability under everyday workshop use. The right‑hand UNF 1/4 x 28 profile is commonly used in mechanical assemblies and fastener systems, and the gauge is intended for rapid go/no‑go verification when high throughput is required. The clear physical design simplifies operator training and enables quick, repeatable checks without additional measurement equipment. Clear fit specification for quality assurance Tolerance class 2B denotes the standard internal‑thread fit under ANSI practice and is widely accepted for general engineering applications. Using a purpose‑made plug gauge reduces ambiguity when assessing whether a threaded bore meets the required functional fit. The combination of an industry‑recognised standard, hardened gauge material and the specified pitch (28 tpi) lends confidence to quality documentation and audit trails, supporting both in‑house control procedures and external conformity checks. For reliable, standards‑based thread inspection, request the Metav IndustryLine UNF 1/4 x 28 thread plug gauge through Metav Werkzeuge — our advisers in Emmerich will assist with technical matching and delivery. Technical Data Article number: M315.920.F GTIN: 4054469179537 Material: Gauge steel, hardened Mass: 0.1 kg Standard: ANSI/ASME B1.1/B1.2 Thread size: 1/4" x 28 UNF Pitch: 28 tpi Tolerance class: 2B Right‑hand thread Facts Weight: 0.1 kg Pitch: 28 threads per inch Thread form: UNF 1/4 x 28 Tolerance: 2B Special features Hardened gauge‑steel construction Designed for pass/fail inspection of internal threads Conforms to ANSI/ASME B1.1/B1.2 Right‑hand thread profile Category: Thread gauges / Plug gauges FAQ What is the intended use of this thread plug gauge? The thread plug gauge UNF 1/4 x 28 is intended for pass/fail verification of internal UNF threads in production and inspection routines, ensuring compliance with ANSI/ASME B1.1 and the 2B internal‑thread tolerance. Is the gauge suitable for everyday workshop inspection? Yes. The Metav IndustryLine plug gauge, made from hardened gauge steel, is built for repetitive use on the shop floor and provides a durable reference for routine thread checks. What does tolerance class 2B mean for this gauge? Tolerance class 2B specifies the internal‑thread fit under ANSI practice; the plug gauge verifies whether the threaded bore meets the standard internal fit expected for general engineering assemblies. Can this gauge be used for both right‑hand and left‑hand threads? This particular gauge is manufactured with a right‑hand UNF 1/4 x 28 profile; left‑hand threads require a dedicated left‑hand gauge. Which standards does the product follow? The product conforms to ANSI/ASME B1.1/B1.2 for UNF thread form and pitch, providing compatibility with common engineering and inspection protocols. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/4" 28 TPI UNF Thread Go/No-Go Ring Gauge Right-Hand Hardened Gauge Steel ANSI/ASME B1.1 2A - Metav IndustryLine
The hardened gauge steel construction and strict ANSI/ASME B1.1 conformity ensure reliable acceptance testing of 1/4‑28 UNF threads; combined with the 2A tolerance class this ring supports consistent quality control and fewer production rejects. Order the thread gauge ring directly via Metav Werkzeuge or ask our consultants if needed. Thread gauge ring UNF NOGO — 1/4‑28 tpi, ANSI/ASME B1.1 / 2A (Metav IndustryLine) The Thread gauge ring UNF NOGO, 1/4 x 28 ANSI/ASME B1.1 / 2A is a go/no‑go ring gauge designed for fast verification of 1/4‑28 UNF right‑hand external threads in production and inspection environments. NOGO ring for 1/4‑28 UNF Hardened gauge steel construction Conforms to ANSI/ASME B1.1 standard Tolerance class 2A for external threads Fast, unambiguous pass/fail checks for production lines This NOGO ring performs immediate go/no‑go verification so non‑conforming parts are recognised at the first control point. By using a dedicated 1/4‑28 UNF NOGO ring, cycle times are shortened and manual gauging ambiguity is removed; the clear mechanical decision reduces rework and improves throughput on the shop floor. The result is a measurable improvement in process reliability during threaded part production. Built for repeatable precision and long service life Manufactured from hardened gauge steel, the ring offers strong wear resistance and dimensional stability under regular use. The 2A tolerance class defines the acceptance limit for external threads and, together with the robust material, supports repeatable inspection over many batches. For quality teams this means fewer replacements, predictable maintenance intervals and consistent inspection results across shifts. Conformity to standards for traceable inspection Compliance with ANSI/ASME B1.1/B1.2 ensures compatibility with established UNF thread definitions and facilitates communication across procurement and inspection departments. The ring's right‑hand thread form and 28 tpi pitch match industry specifications, enabling its integration into documented quality plans and acceptance procedures. Using standardised gauges aids certification processes and supports contractual quality requirements. Practical use cases and workshop advantages Designed as a dedicated external thread gauge, this ring is suitable for inline sample checks, incoming goods inspection and final part acceptance. The compact ring format simplifies handling on the control bench and reduces the risk of misalignment during checks. Calibration intervals can be scheduled according to in‑house quality policy to maintain measurement confidence and to document conformity during audits. Contact Metav Werkzeuge to arrange supply, request calibration details and secure the M315.980.F thread ring for your inspection workflow Technical Data Article number: M315.980.F GTIN: 4054469180816 Label: Gewinde‑Lehrring UNF NOGO , 1/4 x 28 ANSI B1.1 / 2A Material: Lehrenstahl, gehärtet Standard: ANSI/ASME B1.1/B1.2 Facts Size: 1/4" Pitch: 28 tpi Tolerance class: 2A Weight: 0.1 kg Special features Type: Thread ring gauge (NOGO) Thread direction: Right‑hand thread Application: External thread inspection Usage: Go/No‑Go acceptance testing FAQ What does NOGO mean for this ring gauge? The NOGO designation indicates the ring is intended as the limit gauge that must not pass a correctly made part; the Thread gauge ring UNF NOGO, 1/4 x 28 verifies that external threads do not exceed the maximum material condition. Is the ring suitable for production control of UNF threads? Yes, the ring is specified for 1/4‑28 UNF external threads and, by conforming to ANSI/ASME B1.1, is suitable for routine production and incoming inspection tasks. Which material is used for the gauge and why? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure sustained accuracy during repeated use. What does tolerance class 2A signify for inspectors? Tolerance class 2A defines the acceptance limits for external threads; inspectors use this class to judge whether a manufactured thread meets standard external thread fit requirements. Can this ring be used for left‑hand threads? No, this specific ring is manufactured with a right‑hand thread and is intended for right‑hand 1/4‑28 UNF checks only. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/4" 32 TPI UNEF Thread Go Gauge Right-Hand Hardened Gauge Steel ANSI/ASME B1.1 2B - Metav IndustryLine
Take advantage of a compact inspection tool that combines ANSI/ASME compliance, hardened gauge steel and a clear 2B tolerance for reliable internal-thread verification; order this thread plug gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Thread Plug Gauge UNEF 1/4-32 (2B) — hardened gauge steel, ANSI/ASME B1.1 compliant The Thread Plug Gauge UNEF 1/4-32 (2B) provides a fast, standardised method for verifying internal UNEF threads to ANSI/ASME B1.1 in workshop and production settings. Hardened gauge steel construction Conforms to ANSI/ASME B1.1 / B1.2 standards Right-hand thread for standard assemblies Tolerance class 2B for internal threads Speedy, standards-based thread inspection for production The gauge is engineered for immediate verification of internal threads in production and assembly processes. By matching ANSI/ASME B1.1 tolerances and the 2B tolerance class, the tool enables concise go/no-go decisions that reduce rework and keep throughput steady. The UNEF 1/4-32 form with 32 tpi is presented in a compact format that fits inspection benches and handheld checks, supporting fast in-process control without complex measurement setups. This rational approach lowers cycle times and helps maintain consistent quality across batches. Robust material and geometry for repeatable results Manufactured from hardened gauge steel, the plug delivers durability under frequent use while protecting the critical thread form against wear. The right-hand thread geometry aligns with common assembly practices, so repetitive checks remain representative of actual mating conditions. Thanks to its solid construction, the inspection tool provides repeatable feedback on thread condition and machining accuracy, helping to identify tool wear or process drift early and to preserve dimensional integrity in series production. Practical integration into workshop quality routines As an inspection gauge for internal threads, the instrument complements visual checks and thread measurement systems, acting as a reliable reference in the workshop. The compact design and clear specification make the gauge suitable for assembly control, incoming inspection and final checks prior to dispatch. For technical planning, the tool’s traceable identifiers (SKU and GTIN available) enable straightforward inventory and quality documentation. For any clarification on application or compatibility with specific assemblies, Metav’s sales engineers can advise on selection and process integration. Contact Metav Werkzeuge for ordering or technical consultation on the Metav IndustryLine thread plug gauge — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M315.920.EF GTIN: 4054469179520 Weight: 0.1 kg Size: 1/4" Threads per inch: 32 tpi Facts Tolerance class: 2B Standard: ANSI/ASME B1.1 / B1.2 Special features Material: hardened gauge steel Thread direction: right-hand thread Product type: Thread plug gauge / inspection gauge FAQ Which standard is the gauge manufactured to? The Thread Plug Gauge UNEF 1/4-32 (2B) is produced to meet ANSI/ASME B1.1 / B1.2 thread specifications for UNEF forms. Is this gauge suitable for routine shop‑floor checks? Yes, the hardened construction and compact form make the plug gauge suitable for routine production and assembly checks where repeatable verification of internal threads is required. What does the tolerance class 2B indicate? Tolerance class 2B designates the standard internal thread tolerance for a normal fit according to ANSI/ASME, appropriate for most general engineering and assembly tasks. How is the thread handedness specified? This inspection tool uses a right-hand thread, the common direction for standard fastened assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/4" 32 TPI UNEF Thread Ring Gauge GO Right-Hand Hardened Gauge Steel ANSI/ASME B1.1/B1.2 - Metav IndustryLine
Take the assurance of a purpose-made GO ring gauge constructed from hardened gauge steel, combined with ANSI conformity and a compact 1/4‑32 UNEF form, to streamline thread acceptance checks in production. Order the gauge directly via Metav Werkzeuge or consult our specialists for integration into existing inspection routines. Thread ring gauge UNEF GO, 1/4‑32 ANSI B1.1 / 2A — Metav IndustryLine; hardened gauge steel, tolerance class 2A A Thread ring gauge UNEF GO, 1/4‑32 ANSI B1.1 / 2A designed for rapid verification of external thread form and dimensional acceptance in manufacturing and inspection environments Hardened gauge steel construction ANSI B1.1 compliant thread form Tolerance class 2A GO gauge Compact 1/4‑32 UNEF size Consistent pass/fail verification for production control A GO ring gauge provides an immediate, objective check for external threads: the part either enters the gauge (pass) or it does not (fail). Built to the ANSI B1.1 profile and finished to tolerance class 2A, this gauge reduces interpretation variance and speeds up quality decisions on the shop floor. The simple physical check complements dimensional measuring equipment by offering a fast, reproducible acceptance criterion that fits inline inspection points or final checks before assembly. Durable construction for long service life and repeatability Manufactured from hardened gauge steel, the ring resists wear and maintains profile integrity over extended use, preserving high repeatability of go/no‑go results. Heat treatment and finishing reduce the risk of profile distortion, so calibration intervals can be extended compared with untreated tools. Where traceability is required, periodic verification with a competent calibration service ensures continued conformity to the specified tolerance class and maintains process confidence. Practical integration into inspection workflows Sized for common fine threads, the 1/4‑32 UNEF ring is compact and straightforward to handle for production inspectors and incoming goods teams. The right‑hand thread form suits standard fasteners and turned components; the gauge is primarily for external thread checks and complements full metrological inspection when a dimensional record is required. Use the ring for rapid sorting of batches, first‑off checks or final acceptance steps to reduce rework and keep assembly lines moving. Contact Metav Werkzeuge for ordering, calibration options or advice on integrating this Metav IndustryLine GO ring gauge into existing test plans — Metav Werkzeuge can advise on suitable calibration intervals and delivery to the workshop. Technical data Article number: M315.950.EF GTIN: 4054469180168 Weight: 0.1 kg Material: gauge steel, hardened Thread: 1/4" x 32 UNEF Tolerance class: 2A Type: GO ring gauge Standard: ANSI/ASME B1.1/B1.2 Special feature: Right‑hand thread Facts Pitch: 32 TPI Size: 1/4" Weight numeric: 0.1 kg Tariff number: 90173000 eClass: 21170214 Special features Hardened gauge steel construction ANSI/ASME B1.1/B1.2 conformity Tolerance class 2A GO gauge Right‑hand thread Compact design for quick checks FAQ What is the purpose of this GO ring gauge? The ring gauge is used to perform quick pass/fail verification of external threads against the 1/4‑32 UNEF profile and tolerance class 2A, ensuring components meet the ANSI thread form before assembly or dispatch. Is the gauge compliant with recognised standards? Yes, the product conforms to ANSI/ASME B1.1/B1.2 and is supplied as a GO ring gauge for the 1/4‑32 UNEF thread form (SKU M315.950.EF, Metav IndustryLine). Which components can be inspected with this gauge? External threaded components such as turned parts, fasteners and machined studs that use the 1/4‑32 UNEF thread form can be checked for acceptance with this GO ring gauge. How should the gauge be maintained to preserve accuracy? Clean after use, protect from impact, and store in a dry environment; schedule periodic verification by a calibration provider to confirm continued conformity to tolerance class 2A. What is included with delivery? Delivery comprises the GO ring gauge as specified (1/4‑32 UNEF, tolerance class 2A); for calibration certificates or additional documentation, please consult Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/4" 32 UNF NOGO Thread Go/No-Go Ring, Right-Hand, Hardened Gauge Steel, ANSI/ASME B1.1/B1.2 - Metav IndustryLine
Take advantage of standards‑compliant thread verification with a hardened gauge‑steel ring and precise 2A tolerance to reduce rework and speed up inspection cycles; order the gauge directly via Metav Werkzeuge or consult the technical team for application advice. UNEF NOGO Thread Ring Gauge 1/4" x 32, ANSI/ASME B1.1 / 2A — Metav IndustryLine hardened gauge steel A UNEF NOGO thread ring gauge 1/4" x 32 for quick verification of external fine threads to ANSI/ASME B1.1 standards in production and inspection environments Hardened gauge steel construction Conforms to ANSI/ASME B1.1 tolerance NOGO function for rapid reject assessment Compact, shop-ready at approx. 0.1 kg Rapid, standards-based thread control that reduces downtime The UNEF NOGO thread ring gauge provides a clear, binary check for external threads, confirming whether a threaded part falls outside the permissible form and size defined by ANSI/ASME B1.1. The NOGO condition signals parts that must be reworked or rejected, simplifying decision-making on the shop floor and lowering downstream failure risk. Using a dedicated ring gauge speeds inspection compared with dimensional measurement alone, enabling faster throughput and more consistent lot acceptance. Durable construction for repeated shop use Manufactured from hardened gauge steel, the ring is designed to withstand regular engagement with threaded workpieces while retaining accuracy. The material choice and heat treatment extend service life and reduce wear‑related drift, which in turn lowers the frequency of replacement. The compact mass of approximately 0.1 kg makes the tool easy to handle and store on inspection benches without sacrificing robustness, while the right‑hand thread configuration suits standard assembly orientations. Clear integration into quality workflows and traceability Marked to the applicable standard and supplied with an article identity (SKU and GTIN), the gauge supports traceable inspection records and quality audits. The simple pass/fail nature of a NOGO ring streamlines acceptance routines, reducing operator interpretation and training time. For manufacturers who require consistent conformity to 2A tolerance limits on fine UNEF threads, this ring gauge becomes a practical control point that helps prevent costly assembly issues and warranty claims. Practical advantages for inspection and maintenance planning Because the ring is dedicated to a specific nominal size and pitch — 1/4" x 32 tpi in this case — calibration intervals and wear checks can be scheduled predictably, improving maintenance planning. The compact design allows it to be kept close to production lines for spot checks, while hardened surfaces reduce the need for frequent replacement. For traceability, include the SKU and GTIN in inspection logs to link rejections to specific batches and tooling conditions. Choose Metav IndustryLine’s hardened UNEF NOGO gauges for dependable thread control — contact Metav Werkzeuge in Emmerich for specification guidance and order handling at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.980.EF GTIN: 4054469180809 Size: 1/4" x 32 tpi Tolerance class: 2A Material: hardened gauge steel Standard: ANSI/ASME B1.1/B1.2 Weight: 0.1 kg Customs tariff number: 90173000 Facts Thread pitch: 32 tpi Nominal diameter: 1/4" Tolerance reference: 2A Applicable standard: ANSI/ASME B1.1/B1.2 Mass: 0.1 kg Special features NOGO ring gauge for external threads Right‑hand thread configuration Hardened gauge‑steel construction Category: Thread gauges / inspection tools FAQ What does NOGO mean for this gauge? The NOGO designation indicates the ring is used to verify whether an external thread exceeds the maximum material condition; the UNEF NOGO thread ring gauge 1/4" x 32 marks threads that must be rejected. Which standard does the gauge check against? Threads are assessed to ANSI/ASME B1.1 (and related B1.2) requirements; the ring is manufactured to meet the dimensional limits for a 2A external thread class. Is the material suitable for frequent use in production? Yes, the ring is produced from hardened gauge steel, giving the gauge the durability required for repeated engagement in a shop environment. How does this gauge assist in quality control workflows? A NOGO ring offers an immediate pass/fail result, enabling quick decisions during incoming inspection or in‑process checks and reducing time spent on detailed metrology for obvious failures. What exactly is measured with the 1/4" x 32 designation? The specification denotes a nominal diameter of 1/4 inch with 32 threads per inch (tpi) in the UNEF fine series; the ring is matched to that nominal size and the 2A tolerance band. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/4"×28 Thread Go Ring Gauge UNF, Right-Hand, Hardened Gauge Steel, ANSI B1.1 2A - Metav IndustryLine
Take advantage of a compact, standards-compliant verification tool that combines 1/4‑28 UNF thread checking with durable, hardened gauge steel construction; order directly via Metav Werkzeuge or consult our specialists for application advice. Thread Gauge Ring UNF GO, 1/4‑28 2A — Metav IndustryLine, hardened gauge steel The Thread Gauge Ring UNF GO, 1/4‑28 2A is a precision Go ring gauge for rapid verification of external UNF threads in production and inspection environments. Precision Go ring for 1/4-28 UNF threads Hardened gauge steel construction Conforms to ANSI/ASME B1.1/B1.2 Tolerance class 2A for external threads Right-hand thread configuration Reliable verification that keeps production moving A Go ring gauge provides a quick, repeatable check that an external thread meets assembly requirements. The 1/4‑28 UNF designation denotes the nominal size and the 28 tpi (threads per inch) pitch; verification against the ANSI/ASME B1.1/B1.2 standard ensures compatibility with corresponding internal threads manufactured to the same reference. In practice, this results in fewer assembly failures and a measurable reduction in rework and scrap — a clear efficiency gain for inspection routines on the shop floor. Robust construction for long service life Manufactured from hardened gauge steel, this ring gauge is engineered to withstand frequent use in a workshop environment. The material choice and heat treatment give wear resistance that conserves tolerance integrity over many inspection cycles, extending the interval between recalibrations. The designation tolerance class 2A identifies the external thread tolerance band and aligns the gauge with common engineering expectations for fit and function, so measurement outcomes are both meaningful and actionable. Simple integration into quality workflows Compact and lightweight, the ring is easy to handle at inspection benches and during incoming goods checks. As a Go gauge it confirms that a threaded part will assemble within the intended tolerance; acceptance is immediate when the ring fits correctly. The right-hand thread configuration matches the vast majority of standard fastenings, making this an intuitive tool for production technicians and quality engineers who require rapid, unambiguous results without elaborate setup. Choose Metav IndustryLine thread gauges for dependable, standards-compliant verification; contact Metav Werkzeuge in Emmerich for specification guidance and supply from the European quality hub. Technical data Article number: M315.950.F GTIN: 4054469180175 Description: Thread gauge ring UNF GO, 1/4 x 28 ANSI B1.1 / 2A Facts Nominal size: 1/4 in Threads per inch: 28 tpi Mass: 0.1 kg Tolerance class: 2A Special features Right-hand thread Hardened gauge steel Conforms to ANSI/ASME B1.1/B1.2 Go ring gauge (acceptance check) FAQ What is the primary use of this ring gauge? The Thread Gauge Ring UNF GO, 1/4‑28 2A is used to verify that external UNF threads meet the acceptance criteria for assembly and conformity with the ANSI/ASME standard. Does this gauge check right- or left-hand threads? This ring gauge is supplied as a right-hand thread configuration and is suitable for standard right-hand UNF external threads. Which standard does the gauge comply with? Compliance is to ANSI/ASME B1.1/B1.2, ensuring dimensional compatibility with internal threads produced to the same standard. What does tolerance class 2A mean for inspection? Tolerance class 2A denotes the external thread tolerance band; use of this Go gauge confirms the part falls within that specified external tolerance for reliable mating. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so inspection results remain consistent over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10 mm Ceramic Gauge Ball Si3N4 0.003 mm Accuracy, HV1400–1700 Hardness - Metav IndustryLine
Take advantage of the combination of wear‑resistant Si3N4 material, sub‑micrometre accuracy and a compact 10 mm form factor for reliable inspection and gauge applications; order directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic Measuring Ball (Si3N4), 10 mm — 0.003 mm accuracy | Metav IndustryLine The Ceramic Measuring Ball (Si3N4) is a precision gauge sphere intended for dimensional checking, calibration and fixture validation where repeatable contact geometry is required. Si3N4 ceramic for high wear resistance 10 mm diameter with 0.003 mm accuracy Hardness HV1400–1700 for long service life Surface roughness 0.00001 mm for precise contact Repeatable precision that speeds inspection cycles The sphere delivers a guaranteed 0.003 mm (3 µm) accuracy, which represents a measurable improvement in repeatability for short‑range checking tasks. Such accuracy reduces scatter when comparing mating gauge faces or contact‑type sensors, so inspection loops close faster and rework is cut. Thanks to the tight diameter tolerance of 0.00008 mm, contact points remain consistent between setups, enabling efficient statistical process control and fewer calibration iterations. Durable ceramic construction that lowers lifecycle costs Manufactured from Si3N4 ceramic, the gauge ball combines high hardness and low wear to extend service life under repeated contact conditions. The specified hardness HV1400–1700 and the very fine surface roughness of 0.00001 mm (≈10 nm) minimise material transfer and abrasion on mating parts; this keeps measurement surfaces stable and reduces the need for part replacement. For applications where non‑magnetic behaviour and chemical stability matter, the ceramic body maintains performance where steel spheres might suffer corrosion or magnetic interference. Compact format for versatile use and simple handling With a 10 mm diameter and a listed mass of 0.08 kg, the sphere suits compact fixtures, plug gauges and precision jigs where a small contact radius is required. The geometry supports consistent single‑point contact for comparative gauges and tactile probes, while the fine surface finish preserves probe tips and reduces wear. The ball form is particularly useful in modular gauging systems and can serve as a reference element in bench‑level inspection or portable test rigs. Contact Metav Werkzeuge today for tailored advice on integrating Metav IndustryLine gauge spheres into existing inspection routines; phone +49 2822 7131930 or email info@metav-werkzeuge.com for prompt technical support and procurement assistance Technical data SKU: M318.440 GTIN: 4054469184401 Material: Ceramic (Si3N4) Diameter: 10 mm Accuracy: 0.003 mm Mass: 0.08 kg Hardness: HV1400–1700 Surface roughness: 0.00001 mm Diameter tolerance: 0.00008 mm Facts Diameter (numeric): 10 mm Accuracy (numeric): 0.003 mm Mass (numeric): 0.08 kg Hardness (numeric): HV1400–1700 Surface roughness (numeric): 0.00001 mm Diameter tolerance (numeric): 0.00008 mm Special features Material: Ceramic (Si3N4) Category: Lehren (gauges) GTIN and SKU included Compact gauge sphere for contact measurement FAQ What is the declared accuracy of this gauge sphere? The stated accuracy for the Ceramic Measuring Ball (Si3N4) is 0.003 mm, which equates to 3 micrometres and is intended for high‑repeatability contact checks. Can this ceramic ball be used where magnetic interference is a concern? Yes, the Si3N4 composition is non‑magnetic and suitable for environments where magnetic materials could disturb measurement processes. How does the surface finish influence measurement reliability? The extremely fine surface roughness of 0.00001 mm minimises variation at the contact point, preserving probe tips and ensuring more reproducible results with the Ceramic Measuring Ball (Si3N4). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10 mm Ceramic Setting Ring 0.001 mm Accuracy, Wear‑Resistant Antimagnetic Zirconia - Metav IndustryLine
Take advantage of zirconia ceramic construction and ±0.001 mm accuracy for dependable, repeatable gauging in demanding workshop environments; the high HV 1250 hardness and antimagnetic, rust‑free finish ensure long service life and low wear. Order supply or request specification details via Metav Werkzeuge for a reliable addition to calibration and setting routines. Ceramic setting ring 10 mm 0.001 mm (38x10) — Metav IndustryLine, workshop-grade precision Ceramic setting ring 10 mm 0.001 mm (38x10) is a workshop-grade zirconia ceramic gauge designed for high-precision setting and calibration tasks in toolrooms and inspection benches *Zirconia ceramic, extremely wear-resistant *Hardness HV 1250 for long service life *Accuracy ±0.001 mm for submicron setting *Workshop version, antimagnetic and rust-free Precision that removes doubt and reduces rework The Ceramic setting ring 10 mm 0.001 mm (38x10) provides an ±0.001 mm tolerance that supports fine adjustment and repeatable reference measurements; this level of precision converts to measurable reductions in setup time and scrap when used as a gauge reference or master for tool presetting. The submicron capability is presented here as a practical advantage: tighter tolerances mean fewer test cycles and consistent fitment on subsequent operations. The ring’s role as a reference item is emphasised by its stable geometry, which is less prone to dimensional drift than softer materials under normal workshop handling. Built for long service in real workshop conditions Constructed from zirconia ceramic, the component combines exceptional hardness (HV 1250) with low wear characteristics, so face‑wear and edge rounding are minimised during repetitive contact-based use. The material choice delivers a rust‑free and antimagnetic finish, making the ring suitable for environments where ferromagnetic influence or corrosion would compromise steel masters. The workshop specification denotes a robust design intended for daily handling and mounting in tool‑setting fixtures; longevity of the gauge translates into longer calibration intervals and lower total cost of ownership. Seamless quality integration and traceable measurement confidence As a compact setting gauge, the ring is straightforward to incorporate into calibration stacks, tool presetters and inspection jigs where a compact master is required. The wear‑resistant surface maintains reference dimensions over many cycles, supporting stable process control and reliable go/no‑go decisions. For operations seeking to standardise procedures, the ring serves as a reproducible datum that improves first‑pass yield and reduces machine downtime. Backed by Metav IndustryLine’s quality filter, the component complements a workshop’s quality assurance measures and supports documented measurement routines. Choose the Metav IndustryLine ceramic setting ring for submicron reference accuracy and durable workshop performance — contact Metav Werkzeuge in Emmerich for specification details and supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M313.K10 Label: Keramik-Einstellring 10 mm 0.001 mm (38x10) Manufacturer: Metav IndustryLine Facts Accuracy: ±0.001 mm Hardness: HV 1250 Dimensions: 38 x 10 mm Special features Material: zirconia ceramic Antimagnetic Rust-free Wear-resistant Workshop version FAQ What accuracy can be expected from this setting gauge? The ring delivers ±0.001 mm accuracy as stated for the Ceramic setting ring 10 mm 0.001 mm (38x10), suitable for precise tool presetting and fine calibration tasks. Which material is used for the ring and what are the benefits? The gauge is made of zirconia ceramic, providing high hardness (HV 1250), excellent wear resistance and a rust‑free, antimagnetic surface ideal for workshop use. Is the ring suitable as a reference master in a toolroom? Yes; the Metav IndustryLine ceramic setting ring is specified as a workshop-grade reference, intended for repeatable setting and integration into inspection jigs and presetting fixtures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10 mm Gauge Ball Pair Hardened Chrome Steel 0.003 mm Accuracy, 0.00008 mm Diameter Tolerance - Metav IndustryLine
Combining the 10 mm diameter with a 0.003 mm accuracy and a hardened chrome steel finish, this gauge ball pair provides a stable, wear‑resistant reference for gauges and fixture alignment; order the gauge ball pair directly via Metav Werkzeuge or consult our specialists for application advice. Gauge ball pair M318.420 — 10 mm, 0.003 mm accuracy (Metav IndustryLine) The gauge ball pair offers precision reference spheres in hardened chrome steel for gauge work, dimensional checks and fixture setup across toolrooms and inspection benches. *10 mm hardened chrome steel balls *Precision tolerance 0.003 mm *Supplied as a pair Repeatable reference surfaces for inspection and setup High‑precision measurement spheres serve as reproducible contact points in a range of inspection workflows. With a nominal diameter of 10 mm and an indicated accuracy of 0.003 mm, the spheres reduce variability when used as reference elements in comparative measurements, fixture alignment or master gauge assemblies. The exceptional diameter tolerance (0.00008 mm) and very low surface roughness (0.00001) minimise local form errors and ensure consistent kinematic contacts, which in turn lowers measurement uncertainty and speeds up setup routines. Hardened material for durability and long service life Manufactured from hardened chrome steel with a hardness above HRC 62, the spheres resist wear and maintain roundness under repeated contact. This material choice supports longevity in workshop environments and preserves the integrity of the reference surface during routine handling and gauging cycles. The robust finish allows the spheres to withstand the mechanical stresses typical of gauge fixtures, ensuring reliable performance over time and fewer replacements—an efficiency gain for production and quality departments. Practical delivery and compatibility with gauge systems Delivered as a pair, the spheres are ready for integration into gauges, plug gauges, test stands or as tuning elements for measurement jigs. The low mass and compact form make them straightforward to mount or seat in locator pockets, while the precise tolerance and roughness data enable their use where tight control of contact geometry is required. For workshop planners and quality engineers, the combination of repeatability and material resilience offers a cost‑effective way to upgrade reference standards without complicated installation or calibration procedures. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine gauge ball pair M318.420 into inspection fixtures and gauge assemblies, or to request ordering and delivery details from our Emmerich distribution centre Technical Data SKU: M318.420 GTIN: 4054469184081 Article name: Gauge ball pair, chrome steel, 10 mm, 0.003 mm accuracy Facts Diameter: 10 mm Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness: 0.00001 Hardness: > HRC 62 Weight: 0.05 kg Special features Material: chrome steel, hardened Supplied as: set of 2 pieces Category: Gauges (Lehren) FAQ What diameter do the gauge balls have? The gauge ball pair is manufactured with a nominal diameter of 10 mm, suitable for fine reference and fixture work. What accuracy and tolerance are specified? Accuracy is specified as 0.003 mm, with a diameter tolerance of 0.00008 mm, ensuring precise repeatability for gauging tasks. Which material and hardness are used for the spheres? The spheres are made of hardened chrome steel with a hardness greater than HRC 62, designed for wear resistance and long service life. How are the spheres supplied and how many are included? The product is supplied as a pair (set of two), intended for use as matched reference points in gauges and fixtures. Can these spheres be used as reference elements in master gauges? Yes, the dimensional consistency and low surface roughness make the spheres suitable as reference elements in master gauges and precision fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10 mm Limit Go/No-Go Plug Gauge Wear Allowance, DIN 7162 - Filetta
Take advantage of the proven combination of hardened steel construction, DIN 7162 conformity and a clear 10 mm diameter for reliable pass/fail inspection in series production. Order the limit gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Limit Gauge Pin MS911.214 — hardened steel, 10 mm, DIN 7162 A Limit Gauge Pin MS911.214 for fast, repeatable go/no-go checks in workshop and production quality control. Hardened steel construction DIN 7162 compliant 10 mm diameter precision Wear allowance on the go side Consistent pass/fail decisions through standardised geometry The MS911.214 delivers decisive, repeatable results for quick acceptance checks thanks to its precisely ground 10 mm diameter and adherence to DIN 7162. The standardised geometry removes ambiguity in go/no-go inspection and shortens cycle times in quality control routines. As a hardened pin gauge, it is optimised for frequent handling and simple visual verification, so inspection processes become more efficient without added complexity. Robust material and defined wear allowance extend service life Manufactured from hardened steel, the pin resists surface deformation and maintains dimensional stability under continuous use. The specified wear allowance on the go side provides a clearly defined margin for maintenance planning: when the allowable wear is reached, replacement is recommended to preserve measurement integrity. This predictable wear behaviour supports inventory planning and minimises unplanned downtime on the production floor. Practical benefits for workshop and metrology benches Designed for compact and repetitive checks, this limit pin reduces setup time and supports fast inline verification. The simple construction means no electronics or adjustment are required, while the conformity to established standards facilitates integration into existing inspection procedures. For medium- to high-volume verification tasks, the pin contributes to stable quality indicators and easier compliance documentation. For reliable availability and expert advice on Filetta limit gauge pins, contact Metav Werkzeuge in Emmerich — our team can advise on stocking, batch inspection strategies and alternatives for specific applications Technical data Article number: MS911.214 Name: Limit Gauge Pin (Grenzlehrdorne) Manufacturer: Filetta Facts Diameter: 10 mm Material: hardened steel Standard: DIN 7162 Special features Wear allowance on the go side Category: Gauges, Pin gauges Intended use: Pass/fail inspection FAQ What is the primary use of this limit pin? The Limit Gauge Pin MS911.214 is intended for quick go/no-go checks and simple pass/fail inspections of hole diameters and similar features in production and workshop environments. Which standard does the pin conform to? Conformity to DIN 7162 ensures the pin's geometry and tolerances meet recognised metrology requirements for pin gauges. What material is used for the pin and why does it matter? The pin is made of hardened steel, which provides wear resistance and stable dimensions during repeated use, helping to maintain inspection reliability. How does the wear allowance affect maintenance? The specified wear allowance on the go side defines when the pin should be replaced to ensure continued measurement integrity and to avoid accepting out-of-tolerance parts. Is this pin suitable for automated inspection stations? Yes. The simple, robust design and standardised dimensions of the MS911.214 enable integration into automated fixtures or manual verification processes where a fixed go/no-go criterion is required. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
10 mm Limit Plug Gauge Go/No-Go Wear Measure, Hardened Steel, DIN 7162 - Filetta
Limit gauge pins in hardened steel with DIN 7162 conformity and a defined wear allowance ensure reliable go/no-go checking for serial inspection; their compact 10 mm size and robust finish support repeatable measurements across production batches. Order these gauges directly via Metav Werkzeuge or consult our specialists for matching sets and delivery options. Limit gauge pins — hardened steel, DIN 7162 (Filetta) Limit gauge pins for quick go/no-go checking in machining and quality control, designed for repetitive use in workshop and production environments Hardened steel construction DIN 7162 compliant gauging Wear allowance on go side Compact 10 mm diameter Faster, standard-compliant checking for routine quality control The compact gauge pins are engineered for efficient tactile inspection in production. Made from hardened steel, the pins provide a hard-wearing contact surface that resists deformation during repeated use, which reduces rework and inspection downtime. Conformity with DIN 7162 gives a clear normative basis for acceptance testing, so batch checks and go/no-go decisions can be performed with confidence and traceability. The 10 mm dimension ensures compatibility with common bore sizes and gauge holders. Built for longevity with a wear-compensating design A defined wear allowance on the go side extends service life by allowing controlled material loss before replacement is required. This practical design reduces the frequency of recalibration cycles and keeps inspection throughput steady. Precision-ground tips maintain small contact radii for consistent engagement, while the hardened core resists flattening under repeated contact. The result is lower total cost of ownership and predictable maintenance planning. Practical handling and system integration in the workshop The pins are suited to bench gauges, nested holders and manual gauge sets commonly used in metalworking and tool shops. Their compact format and standardised dimensions permit quick swapping and straightforward storage in standard test sets. Where a go/no-go decision is required on an assembly line, these gauge pins accelerate the process and reduce operator uncertainty, supporting both throughput and quality assurance procedures. What to expect from specification and suppliers Manufactured by Filetta, the pins are supplied according to the stated standard and are suitable for routine inspection tasks where a robust, standardised check is required. The product designation and item number simplify reordering: reference MS911.172 for consistent procurement. For those seeking gauge sets or matched pairs, speak with our advisors to confirm tolerances and any special surface finish requirements. Contact Metav Werkzeuge for tailored set configuration or immediate dispatch from Emmerich — our specialists will advise on matching gauges and delivery options Technical data Article number: MS911.172 Product: Limit gauge pins Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Facts Diameter: 10 mm SKU: MS911.172 Special features Wear allowance on go side Precision-ground tip Category: Measuring gauges — gauge pins Suitable for repetitive go/no-go checking FAQ What material are the pins made from? The pins are manufactured in hardened steel, providing a durable contact surface for repeated gauging. Which standard applies to these gauge pins? These gauge pins conform to DIN 7162, ensuring standardised dimensions and acceptance criteria for go/no-go checks. What does the wear allowance on the go side mean? The wear allowance provides controlled material allowance on the go side so the pin remains within acceptance limits for a defined period before replacement is necessary. Can these pins be used for common bore checks? Yes — the compact 10 mm diameter is intended for typical bore and hole checks and integrates with standard holders and sets. How should the pins be referenced when reordering? Use the item number MS911.172 and the manufacturer name Filetta to ensure identical replacement parts are supplied. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
10 mm Limit Plug Gauge H7 DIN 2245 Hardened Gauge Steel, 0.2 kg - Metav IndustryLine
Take advantage of the combination of DIN 2245 H7 tolerance and hardened gauge steel to ensure rapid, repeatable pass/fail checks of internal diameters; the compact 10.00 mm limit plug reduces inspection time and keeps production flowing. Order the limit plug gauge directly via Metav Werkzeuge or consult our advisers for specification matching. Limit plug gauge M314.010 — 10.00 mm H7, hardened gauge steel (Metav IndustryLine) The limit plug gauge M314.010 is a hardened plug gauge to DIN 2245 H7 designed for efficient go/no-go checking of internal diameters in production and quality assurance DIN 2245 H7 tolerance for repeatable checks Hardened gauge steel for long-term wear resistance Compact plug for fast go/no-go inspection Faster inspections through standardised tolerances The combination of DIN 2245 conformity and H7 tolerance means the gauge provides a clear, objective decision at the control point. By defining a concrete acceptance limit at 10.00 mm, the tool removes ambiguity from routine checks and cuts the number of follow-up measurements. This leads to measurable time savings on the shop floor, fewer stoppages for rework and a more consistent production rhythm; operators benefit from a simple pass/fail outcome that integrates easily with existing inspection routines. Robust construction for reliable repeatability Manufactured from hardened gauge steel, the plug offers high wear resistance and dimensional stability under frequent handling. The material choice reduces the need for frequent replacement and keeps calibration intervals predictable, which in turn supports stable measurement uncertainty over time. Because the gauge is built to withstand industrial use, batch sampling and spot checks remain representative, helping maintain compliance with internal quality plans without adding complexity to daily inspections. Practical application in production and quality control The compact design suits inline inspection stations and bench testing alike: the plug performs rapid internal-diameter verification where quick decisions are required. Traceable identification is available via the SKU M314.010, enabling straightforward inventory assignment and record keeping. For production engineers and quality technicians, the limit plug simplifies control plans by offering a dedicated control point for bore acceptance that complements dimensional measurement tools and statistical process control systems. For reliable, DIN‑compliant gauge tooling from Metav IndustryLine, contact Metav Werkzeuge to discuss how the M314.010 fits into existing inspection workflows and to request technical documentation. Technical data Article number: M314.010 GTIN: 4054469121390 Standard: DIN 2245 Diameter: 10 mm Tariff code: 90173000 Material: gauge steel, hardened Category: Gauge pins; Gauges Brand: Metav IndustryLine FAQ What tolerance class does this plug gauge use? The limit plug gauge M314.010 is manufactured to DIN 2245 with an H7 tolerance, providing a defined acceptance limit for internal diameter checks. What material is the gauge made from? The M314.010 is made from hardened gauge steel, selected for its wear resistance and dimensional stability under repeated inspection cycles. How is the plug gauge used in quality control? This plug serves as a go/no-go control: it verifies whether a bore meets the acceptance limit defined by DIN 2245 H7, enabling fast inline or bench checks without detailed measurement reporting. Is the M314.010 suitable for production sampling? Yes, the compact design and standardised tolerance make the M314.010 well suited to production sampling and routine acceptance checks where quick, repeatable decisions are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10 mm Setting Ring, Hardened Gauge Steel, Form C, DIN 2250 / DIN 286 JS3 - Metav IndustryLine
Take advantage of a compact, standards‑matched setting solution that combines hardened and lapped gauge steel, a precise JS3 tolerance and robust Form C seating for dependable repeatability in the workshop; order the gauge ring directly via Metav Werkzeuge or consult our advisors for specification support. Gauge ring 10 mm M313.010 — hardened, lapped setting ring (Metav IndustryLine) A gauge ring 10 mm for setting and verifying bore gauges, master rings and go/no‑go fixtures in inspection and tool‑setting workflows. Gauge ring 10 mm diameter, DIN 2250 Hardened and lapped gauge steel Tolerance JS3 per DIN 286 Form C geometry for secure seating Accuracy and conformity that make measurement decisions reliable This setting ring is manufactured from gauge steel, subsequently hardened and lapped to deliver stable contact surfaces that resist wear and preserve form over repeated use. Conforming to DIN 2250 and DIN 286 with a JS3 tolerance class ensures the ring can be used as a reference standard for setting instruments and verifying master gauges. The defined tolerance band reduces uncertainty at the control point and supports traceable acceptance criteria in routine quality checks. Designed for repeatable fixturing and tool presetting The 10 mm diameter and the Form C geometry provide secure seating in common holders and gauge fixtures, reducing lateral play during setup. This mechanical stability converts into repeatable measurements and fewer rework cycles on the shop floor. Where small bores and precise datum references are required, the ring serves as a compact, low‑complexity solution that shortens setup time and streamlines measurement routines without complex readjustment. Material finish and longevity for serviceable performance A combination of heat treatment and fine lapping produces surfaces with high flatness and excellent wear resistance, which prolongs service intervals and maintains conformity to specification. The selected steel grade and finishing process are particularly effective in environments where frequent contact and handling occur; this attention to material treatment helps protect the reference geometry and sustains performance in long production runs. Practical integration into inspection and process control As a dedicated setting device, the ring suits calibration benches, incoming inspection and tool‑presetting stations alike. The compact format eases storage and handling while providing a stable master for bore verification. Identification details such as SKU M313.010 and GTIN 4054469120485 simplify inventory management and ordering for maintenance and quality teams. Metav’s distribution from Emmerich acts as a quality filter for European customers, ensuring consistent availability and straightforward replenishment. Choose Metav Werkzeuge to specify and obtain this hardened, lapped gauge ring (SKU M313.010) for precise, repeatable set‑up and inspection tasks — Metav Werkzeuge provides expert advice and direct supply from Emmerich. Technical Data Article number: M313.010 GTIN: 4054469120485 Category: Lehren / Gauges Standards: DIN 2250, DIN 286, JS3 Facts Diameter: 10 mm Customs tariff number: 90173000 Material: hardened, lapped gauge steel Special features Form C geometry Finished surfaces for reduced wear Intended use: setting and verification of bore gauges and masters FAQ What accuracy can be expected from this setting ring? The gauge ring M313.010 is produced to DIN 2250 / DIN 286 with a JS3 tolerance, delivering conformity suitable for precision setting and verification tasks where a defined tolerance band is required. Can the ring be used for tool presetting on a toolmaker’s bench? Yes, the hardened and lapped surfaces of this gauge ring make it suitable for tool presetting and as a compact reference master in workshop inspection and presetting stations. How does Form C benefit fixture mounting? Form C geometry provides a secure seating form that reduces lateral movement and improves stability during mounting, which supports more consistent measurement and less rework. Is this ring suitable for regular shop‑floor use? The combination of hardening and lapping increases wear resistance, making the ring appropriate for regular handling and repeated use in a production environment. Which identifiers should be quoted when ordering replacements? Please quote SKU M313.010 and GTIN 4054469120485 to ensure correct identification and prompt fulfilment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.01mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop-hardened construction and very fine tolerance for reliable end-dimension checks; order directly via Metav Werkzeuge or contact our consultants for a tailored delivery. Gauge pin, single, Ø 10.01 mm × 50 mm — Metav IndustryLine workshop gauge, ±0.002 mm accuracy The Gauge pin, single, Ø 10.01 mm × 50 mm is a workshop-grade precision pin for end-size verification and fast pass/fail checks in assembly and inspection processes. ±0.002 mm accuracy for tight tolerances Special steel for long service life 50 mm length for end-dimension checks Workshop design for everyday use Accuracy that reduces rework and speeds inspection The gauge pin delivers a measured tolerance of ±0.002 mm, a level of precision that supports tight quality limits and repeatable go/no-go checks. Such fine accuracy minimises false rejects and reduces rework cycles by providing a clear, objective reference for end-dimension inspection. In practice, a consistent reference pin streamlines first-article inspections and routine control steps, helping production maintain process capability and reduce downtime. Robust design made for everyday workshop use Constructed from special steel and specified as a workshop version, this pin combines durability with practical handling. The 50 mm shaft length provides a reliable grip and contact surface for end-face checks, while the compact Ø 10.01 mm size suits a wide range of components and fixtures. At approximately 0.1 kg the gauge is easy to position but substantive enough to resist accidental distortion, supporting high-repeatability measurements during frequent use. Simple integration into quality workflows and traceability The single-pin format supports rapid comparison checks and can be incorporated into inspection jigs or manual gauge sets for batch control. The product is identifiable by SKU M323.A01 and GTIN 4061905063190, which aids stock management and traceability in purchasing and quality records. For businesses seeking pragmatic metrology tools, the pin offers a reliable reference that integrates with standard workshop practices while supporting consistent measurement outcomes. For precision end-dimension checks request the Metav IndustryLine gauge pin (SKU M323.A01) via Metav Werkzeuge for a customised delivery and technical advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.A01 GTIN: 4061905063190 ECLASS: 21170231 Facts Diameter: 10.01 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Application: End-dimension checks / inspection pins Category: Gauge pins (Messstifte) Version: Workshop edition FAQ What tolerance can be expected from this pin? The Gauge pin, single, Ø 10.01 mm × 50 mm is specified with an accuracy of ±0.002 mm, suitable for tight workshop inspection tolerances. Which material is used for this gauge pin? This Metav IndustryLine inspection pin is made of special steel, chosen for wear resistance and stable contact surfaces during repetitive use. Can the pin be used for pass/fail checks on shafts and bores? Yes — the Ø 10.01 mm diameter and 50 mm length make the pin appropriate for quick pass/fail and end-dimension checks on shafts, bores and mating parts. How is the product identified for ordering and traceability? The item is listed under SKU M323.A01 with GTIN 4061905063190, enabling direct procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.02mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from workshop-grade construction, a 10.02 mm nominal diameter and an accuracy of ±0.002 mm for repeatable reference measurements; robust special steel and a transport-safe box support reliable handling on the shop floor. Order the gauge pin directly via Metav Werkzeuge or consult our technical team for application support. Gauge pin, single — 10.02 mm diameter | 50 mm length (Metav IndustryLine) The Gauge pin, single — 10.02 mm, 50 mm is a workshop-grade reference pin designed for quick dimensional checks, fixture alignment and end‑measure comparisons in production and maintenance Workshop version for robust use Diameter precisely 10.02 mm Tolerance ±0.002 mm Supplied in transport box Precision that secures process control The compact reference element delivers a nominal 10.02 mm diameter with a stated ±0.002 mm tolerance, making it suitable where small deviations can affect assembly or fit. As a hardened reference, the pin reduces measurement uncertainty when used as a master gauge for go/no‑go checks, plug‑fit trials or repeatable set‑ups. The declared tolerance corresponds to micrometric control and supports consistent quality documentation across batches. Built for workshop handling and longevity With a 50 mm overall length and manufacture from special steel, this reference pin balances rigidity and manageable handling for bench or machine‑side use. The workshop version specification prioritises robustness over delicate lab finishes, so routine loading and storage is less likely to leave the reference compromised. Delivery in a transport box protects the pin during transit and simplifies organisation on the shop floor. Fast integration into inspection and set‑up routines Identified as M323.A02, this gauge pin fits inspection jigs, fixture seats and manual checking stations where a short, reliable reference is required. As a single‑piece reference it is particularly useful for end‑measure validation and repeat checks during maintenance intervals. Traceable identification via GTIN supports inventory control and batch tracking when integrated into quality workflows. Contact Metav Werkzeuge for guidance on fixture compatibility or to request detailed dimensional drawings and stock information — Metav Werkzeuge provides quick, expert advice from Emmerich to support production decisions Technical data Article number: M323.A02 GTIN: 4061905063206 Brand: Metav IndustryLine Label: Gauge pin, single, 10.02 mm length 50 mm Measured values Diameter: 10.02 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Features & materials Material: Special steel Version: Workshop version Delivery: Transport box for safe transport Category: Gauge pins (Messstifte) FAQ What is the stated tolerance of this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, enabling micrometric repeatability for reference checks with the M323.A02. For which tasks is this reference pin intended? This workshop‑grade pin is intended for dimensional checks, fixture alignment and end‑measure comparisons in production and maintenance environments. Is the pin protected for transport? Yes, the item is supplied in a transport box to protect the reference during shipping and handling. What material is used for this gauge pin? The pin is manufactured from special steel, chosen for dimensional stability and resistance to wear under routine use. How can the product be identified in stock systems? Identification is by article number M323.A02 and GTIN 4061905063206 for inventory and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.03mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high precision and a compact form factor — the 10.03 mm diameter with ±0.002 mm tolerance and a 50 mm length ensure repeatable end‑size checks and stable fixture locating; order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.A03 — 10.03 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.A03 is a precision ground test pin designed for end‑size verification and fixture locating in workshop environments. Precision diameter 10.03 mm, tolerance ±0.002 Special steel for long service life 50 mm length for secure fixture engagement Workshop execution for routine measuring tasks Repeatable end‑size verification for production control The gauge pin offers a defined measuring diameter of 10.03 mm and a declared positional accuracy of ±0.002 mm, which enables consistent go/no‑go checks and reliable reference fits on small to medium assemblies. Such a tight tolerance reduces measurement variation between operators and across batches, supporting quality control procedures and minimising rework. The compact, single‑piece design simplifies insertion into bores or locating holes and is particularly suitable where a stable reference for alignment or end‑size verification is required. Built for workshop use with durable construction Manufactured from special steel, the test pin is intended for frequent handling in production and maintenance settings. The workshop version designation highlights pragmatic choices in material and finishing that favour wear resistance and straightforward use in jigs and fixtures. The modest mass (approx. 0.1 kg) and the 50 mm overall length make the pin easy to position while retaining enough engagement depth for secure seating in through‑holes and blind bores. This balance between reach and handling supports efficient process flows on the shop floor. Practical handling and typical applications As a single test pin, this product is ideal for precise locating, end‑size checks and fixture setup during assembly and inspection tasks. The compact geometry suits applications such as checking bore diameters at final size, aligning mating parts during assembly, or serving as a master plug for in‑process verification. The simple geometry also makes the item easy to clean and inspect visually, which helps maintain measurement integrity and minimise downtime between checks. Choose Metav IndustryLine gauge pins for reliable, repeatable end‑size control — contact Metav Werkzeuge for tailored advice or to order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.A03 GTIN: 4061905063213 Manufacturer: Metav IndustryLine Core dimensions Diameter: 10.03 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Single gauge pin for end‑size verification Material: special steel Workshop execution Intended for fixture locating and alignment FAQ What tolerance does the gauge pin offer? The Gauge pin M323.A03 is manufactured to a tolerance of ±0.002 mm, suitable for close dimensional control. What material is used for this test pin? This test pin is made from special steel, specified for robustness in workshop use and frequent handling. What are the main applications for this gauge pin? Typical uses for the gauge pin include end‑size checks, fixture locating and alignment tasks during assembly and inspection. What are the exact dimensions of the pin? The Gauge pin M323.A03 has a diameter of 10.03 mm and an overall length of 50 mm. Is the pin supplied as a single item or in sets? The product is supplied as a single gauge pin; the SKU for ordering is M323.A03 and it belongs to the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.04mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Taking advantage of high repeatability (±0.002 mm) and a robust special‑steel construction, this gauge pin provides reliable end‑dimension checks with minimal handling time; supplied ready for safe transport in a protective case. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.A04 — single 10.04 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.A04 is a precision test pin designed for end‑dimension verification in workshop and metrology environments, ideal for inline checks and bench inspection tasks. ±0.002 mm accuracy for exact dimensioning 10.04 mm nominal diameter, length 50 mm Special steel construction for workshop use Reliable repeatability for end‑dimension verification The gauge pin is engineered to deliver consistent inspection results, with a declared tolerance of ±0.002 mm that supports tight end‑dimension control. Its 10.04 mm nominal diameter and 50 mm length place it in the micro measurement range, making it suitable for fine mechanical parts where short, stiff measuring members reduce bending and handling error. The compact design speeds up repetitive checks and reduces downtime: fewer adjustments are required to confirm conformity of end masses and mating bores. Workshop durability without sacrificing precision Built as a workshop‑grade test pin from special steel, the component resists wear while preserving measurement integrity over many cycles. The unit’s modest 0.1 kg mass and balanced geometry simplify handling during assembly‑line or bench inspections, and the supplied protective transport case keeps the pin safe between uses. The combination of robust material choice and concise dimensions means the instrument withstands the everyday demands of a busy shop floor while still delivering metrology‑grade results. Simple integration into inspection routines for faster throughput As a standard nominal size within common inspection sets, the pin fits established gauges and fixtures, supporting straightforward interchange and storage. The compact form factor reduces manipulation time and increases repeatability across operators. Backed by Metav’s distribution and advice, the component can be incorporated into quality‑control plans to reduce false rejects and accelerate decision making during production runs. For precise end‑dimension control and workshop reliability, contact Metav Werkzeuge to discuss the Metav IndustryLine gauge pin M323.A04 and how it can be integrated into existing inspection routines; Metav’s team in Emmerich is available by e‑mail or phone Technical data SKU: M323.A04 GTIN: 4061905064135 Brand: Metav IndustryLine Facts Nominal diameter: 10.04 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution (Werkstatt‑Ausführung) Supplied in a protective transport case Suitable for end‑dimension (endmasse) checks FAQ What tolerance does the gauge pin provide? The gauge pin offers a tolerance of ±0.002 mm, enabling precise end‑dimension verification for small components. What is the exact size and length of the pin? This test pin has a nominal diameter of 10.04 mm and a length of 50 mm, supplied under the SKU M323.A04. Is the pin suitable for daily workshop use? Yes, the Metav IndustryLine workshop execution and special‑steel construction make the pin durable enough for regular inspection duties. How is the item delivered for transport and storage? The gauge pin is supplied in a protective transport case to keep the measuring surface secure between uses. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.05 mm Gauge Pin Length 50 mm Workshop Version, Special Steel - Metav IndustryLine
A compact combination of high repeatability and robust workshop design delivers reliable locating and end‑measurement for small components; benefit from the ±0.002 mm tolerance and durable special steel, and order directly via Metav Werkzeuge or consult our specialists for fitment advice. Gauging pin M323.A05 — 10.05 mm diameter, 50 mm length (Metav IndustryLine) A gauging pin designed for precise end measurements and fixture setting in workshop metrology. Single gauge pin 10.05 mm diameter 50 mm working length for compact fixtures Tolerance ±0.002 mm for tight fits Workshop version in special steel Consistent precision for tight fits and repeatable locating The 10.05 mm diameter with a declared ±0.002 mm tolerance provides a reliable reference for end‑measurements and locating tasks where small clearances matter. The narrow tolerance class ensures that the pin functions as a repeatable datum for assembly and inspection processes, reducing rework and setup variance. Specified accuracy like this makes the component suitable for gauge blocks, fixture bores and precision checking where dimensional conformity is essential. Durable workshop design that eases day‑to‑day use Built as a workshop version from special steel, the pin balances wear resistance and handling practicality. The 50 mm length gives sufficient engagement for secure positioning without becoming awkward in compact jigs, while the individual supply format supports selective replacement or dedicated tooling fits. The robust execution is intended to tolerate frequent insertion and removal in a production environment, helping to maintain measurement stability over repeated cycles. Small‑format metrology with broad application scope Classified within the micro measuring range, this gauge pin targets fine mechanical tasks and small assemblies where precise end stops and gauge references are required. Its compact footprint and stable geometry aid quick fixturing and fast interchange in inspection benches, while the modest mass contributes to easy manual handling and minimal influence on delicate set‑ups. The combination of size, tolerance and construction supports consistent results in laboratory checks and workshop quality control alike. Contact Metav Werkzeuge for a tailored quote or technical clarification on the Metav IndustryLine M323.A05 gauging pin and ensure the right fit for workshop metrology and fixture use Technical data Article number: M323.A05 GTIN: 4061905064142 SKU: M323.A05 Label: Gauging pin, single, 10.05 mm, length 50 mm Facts Diameter: 10.05 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Supply: single item Category: gauge pins FAQ What tolerance class does this pin meet? The M323.A05 gauging pin (Metav IndustryLine) is specified with a tolerance of ±0.002 mm, suitable for tight fits and repeatable locating operations in precision fixtures. For which applications is this gauge pin intended? This precision pin is intended for end‑measurements, fixture alignment and small‑component locating in workshop metrology; the M323.A05 is well suited to inspection benches and jig set‑ups. Is the item supplied individually or as part of a set? The product is supplied as a single gauging pin; the designation indicates individual supply rather than a matched set. What is the material and construction of the pin? The M323.A05 is made from special steel and delivered in a workshop execution designed for frequent use and stable dimensional behaviour. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.06mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Reliable workshop-grade gauge that pairs ±0.002 mm tolerance with a 10.06 mm nominal diameter and a 50 mm length for repeatable end‑measure checks. Supplied as a single, robust test pin made from special steel for stable seating and consistent results; order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test Pin M323.A06 — Single Gauge Pin, Ø 10.06 mm, 50 mm Length (Metav IndustryLine) A Test Pin M323.A06 designed for precise end‑measure verification and reference checks in workshop inspection and assembly tasks. Workshop‑grade design Diameter 10.06 mm Length 50 mm Tolerance ±0.002 mm Consistent measurement performance for inspection tasks The core benefit of this gauge is measurement reliability: with a specified tolerance of ±0.002 mm, the pin provides a stable reference for end‑measure verification and dimensional spot checks. Classified in the micro range (10–100 mm), this size is ideal where compact gauges are required and where short seating lengths reduce bending and handling error. The precise tolerance supports quality control routines and helps reduce scrap by tightening pass/fail decisions on small components. Durable construction that supports repeat use Manufactured from special steel, the pin combines dimensional stability with wear resistance appropriate for repeated seating in jigs and gauges. The 50 mm length gives sufficient engagement for many end‑measure and fixture applications while remaining easy to handle in bench and jig environments. Supplied as a single unit, the device fits inspection benches, measurement fixtures and assembly gauges where a single, high‑precision reference pin is required. Practical application and workshop integration This gauge pin suits machinists, toolmakers and inspection staff who require a reliable reference for final dimensional checks, fixture alignment and end‑stop calibration. The compact design makes it straightforward to integrate into existing setups, and the single‑piece supply simplifies inventory for small runs and repairs. For technical queries about fitting the pin into dedicated fixtures or for compatibility with measurement systems, technical advice is available from Metav Werkzeuge. For precision end‑measure tasks and ordering advice, contact Metav Werkzeuge for direct ordering or technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.A06 GTIN: 4061905064159 Manufacturer: Metav IndustryLine Facts Diameter: 10.06 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Single item supply Workshop execution FAQ What is the declared accuracy of this test pin? The declared tolerance for the M323.A06 test pin is ±0.002 mm, suitable for repeatable end‑measure and reference checks. Is the gauge pin delivered with an ISO 17025 certificate? The item is not indicated as being supplied with an ISO 17025 calibration certificate; no specific calibration certificate is described in the product data. What material is used for the pin? The gauge pin is machined from special steel, selected for dimensional stability and wear resistance in workshop use. Which applications are suitable for this gauge pin? Typical uses include end‑measure verification, fixture alignment, reference stops and small‑part inspection in machining and toolroom environments. How is the product supplied and identified? The pin is supplied as a single item and is listed under SKU M323.A06 by Metav IndustryLine Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.07mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, ±0.002mm Accuracy - Metav IndustryLine
Take advantage of the combination of workshop-grade durability, tight dimensional tolerance and compact length for reliable end‑dimension checks; order the inspection item directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A07 — 10.07 mm diameter, 50 mm length (Metav IndustryLine) A precision gauge pin M323.A07 designed for accurate end‑dimension checks and routine inspection tasks in workshop environments. Workshop version for robust daily use Diameter 10.07 mm with ±0.002 mm tolerance Compact 50 mm length for confined fixtures Made from special steel for long service life Stable reference for critical dimensional control The gauge pin provides a compact, repeatable reference for end‑dimension verification and go/no‑go inspections. With a nominal diameter of 10.07 mm and a verified positional tolerance of ±0.002 mm, the pin serves as a dependable element in assembly checks and final‑size inspections. Tight tolerance values like ±0.002 mm correspond to micrometre‑level control and are especially valuable where interchangeability and repeatability are required. This level of precision minimises rework and supports consistent quality control across batch runs. Workshop‑grade construction reduces recalibration frequency Manufactured as a workshop version from special steel, the inspection pin resists deformation under regular usage and maintains its dimensional integrity during repetitive seating and extraction. The 50 mm length keeps the instrument easy to handle and to fit into compact fixtures, while the chosen material contributes to wear resistance and dimensional stability. Such characteristics reduce the need for frequent replacement and help maintain throughput in high‑turnover production environments. Integrates smoothly into inspection workflows and inventory Designed for straightforward integration, the pin is suitable for insertion into fixture bores, reference plates and simple plug‑gage arrangements for end‑dimension assessment. Clear identification simplifies stock control — GTIN 4061905064166 and SKU M323.A07 make procurement and traceability effortless within tool cabinets and inspection logs. The single‑piece format supports focused checks where a precise, known diameter is required for validating mating components or verifying end‑measurements. For dependable workshop inspection, opt for the Metav IndustryLine M323.A07 gauge pin and rely on Metav Werkzeuge’s expertise — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and supply coordination Technical Data SKU: M323.A07 GTIN: 4061905064166 ECLASS: 21170231 Facts Diameter: 10.07 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pin (single piece) Label: Prüfstift, einzeln, 10,07 mm Länge 50 mm FAQ What is the nominal diameter and tolerance of the pin? The pin has a nominal diameter of 10.07 mm with a dimensional tolerance of ±0.002 mm for fine end‑dimension verification. Is this gauge pin suitable for fixture and assembly checks? Yes, the M323.A07 gauge pin is intended for fixture seating, end‑dimension checks and routine workshop inspections where a compact, stable reference is required. What material is used for the inspection pin? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance in workshop environments. How is the product identified for stock and procurement? Identification is provided via GTIN 4061905064166 and SKU M323.A07, facilitating traceability and inventory management. Can the pin be used for go/no‑go testing? The single‑piece gauge format is suitable as a reference element in simple go/no‑go checks when combined with appropriate fixtures or mating gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com