Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
1.85mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine measuring accuracy, compact workshop design and stable 50 mm length for reliable end‑dimension checks; order the matching gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.185 — 1.85 mm | ±0.001 mm tolerance Gauge pin M323.185 is a workshop‑grade inspection pin designed for precise end‑dimension checks, fixture alignment and assembly verification in industrial metrology High-precision ±0.001 mm tolerance 1.85 mm diameter for fine-fit checks 50 mm length for stable probing Workshop-grade special-steel construction Precision that keeps production moving The gauge pin delivers a ±0.001 mm tolerance, which corresponds to a dimensional certainty in the micrometre range and removes ambiguity from pass/fail checks. Such accuracy is particularly valuable in quality control and incoming‑inspection work where repeatable end‑measurements are required. By using a finely ground 1.85 mm probe, measurement routines that test bore sizes, jig alignment or mating fits become faster and more repeatable, reducing inspection time and lowering the risk of downstream rework. Robust design for everyday workshop use Manufactured from special steel for consistent dimensional stability, the pin's 50 mm length provides the stiffness needed for stable probing while remaining easy to handle in workshop environments. This combination of compactness and rigidity helps maintain concentric contact during checks and supports quick manual exchanges on inspection benches or in fixture setups. The workshop specification reflects a balance between practical handling and measurement reliability, making it suitable for repetitive use in production areas. Simple integration into inspection workflows Delivered as a single inspection pin, the product is intended for direct use in gauge sets, fixture controls and handheld checks where a precise reference pin is required. Traceable labelling and a clear article identity support inventory and calibration processes, and the compact form factor makes it straightforward to store alongside other precision tooling. For specialised metrology tasks that need consistent end‑dimension verification, this pin functions as a dependable reference component. For micrometre-level inspection where every micron counts, choose the Metav IndustryLine gauge pin M323.185 — contact Metav Werkzeuge in Emmerich for tailored advice or to request the exact specification and handling notes via info@metav-werkzeuge.com Technical Data Article number: M323.185 GTIN: 4061905054839 Brand: Metav IndustryLine Facts Diameter: 1.85 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Supply form: single inspection pin Workshop specification FAQ What applications is this gauge pin suited to? The gauge pin M323.185 from Metav IndustryLine is suited to bore checking, fixture alignment and fine‑fit inspections where a 1.85 mm reference probe with ±0.001 mm tolerance is required. Is the dimensional tolerance of ±0.001 mm suitable for production control? Yes — a ±0.001 mm tolerance places the pin in the micrometre class, making it appropriate for high‑precision production control and final inspection tasks. How is the pin supplied and identified? The product is supplied as a single inspection pin under article number M323.185 (GTIN 4061905054839) and is intended for direct use in inspection kits or fixtures. Can this pin be used in fixture alignment and assembly checks? Yes; the 50 mm length and special‑steel construction provide sufficient stiffness and repeatability for alignment tasks and assembly verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.86mm Test Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high metrological accuracy and robust workshop design for consistent end‑dimension control; the 1.86 mm gauge pin with ±0.001 mm tolerance and 50 mm length ensures reproducible checks and reliable handling. Order the M323.186 directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.186 — 1.86 mm gauge pin, ±0.001 mm tolerance (Metav IndustryLine) A Test pin 1.86 mm designed for precision end‑dimension verification in gauge testing and fixture checks, supplied as a single workshop‑grade pin Workshop‑grade design Diameter 1.86 mm, ±0.001 mm tolerance 50 mm length in special steel Delivered in protective transport case Micrometre‑level accuracy for dependable end‑dimension checks The M323.186 provides ±0.001 mm repeatability (equivalent to 1 µm), enabling trustworthy verification of critical end faces and plug bores where sub‑millimetre deviations matter. Such fine tolerance reduces measurement uncertainty in acceptance testing and first‑article inspection, supporting clear go/no‑go decisions on production batches. By specifying a 1.86 mm diameter with one‑micrometre accuracy, the gauge pin streamlines dimensional control in jigs, fixtures and precision assemblies while keeping documentation and traceability straightforward. Robust workshop build that preserves precision Constructed from special steel and configured as a workshop‑grade single pin, this gauge component offers stability during repeated handling and short‑range checks. The 50 mm length balances accessibility with rigidity, reducing flex during insertion while remaining compact for bench work. A protective transport case is supplied to prevent damage in transit and storage, preserving geometric integrity and prolonging service life. The combination of durable material and secure packaging supports consistent results even in busy production environments. Smooth integration into inspection and setup routines As a purpose‑built gauge pin, this component fits directly into established inspection workflows — from fixture alignment to end‑measurement confirmation and calibration check routines. The precise tolerance reduces false rejects and rework, contributing to higher throughput and measurable cost savings in quality control. Compatibility with standard gauge blocks and pin holders makes this pin a practical choice for lab and workshop use, providing a simple, low‑risk way to raise measurement confidence during process validation. Contact Metav Werkzeuge for specification matching and to reserve the M323.186 gauge pin for your inspection routines — expert advice and fast supply from our Emmerich quality hub Technical data SKU: M323.186 GTIN: 4061905054846 Diameter: 1.86 mm Length: 50 mm Tolerance: ±0.001 mm Material: Special steel Weight: 0.004 kg Facts Measurement range: 1.86 mm Nominal accuracy: ±0.001 mm Length: 50 mm Net weight: 0.004 kg Special features Workshop version Single test pin delivery Protective transport case included Suitable for end‑dimension checks and fixture alignment FAQ What level of accuracy can be expected from this gauge pin? The M323.186 achieves ±0.001 mm accuracy (1 µm), making it suitable for precise end‑dimension verification in quality control and fixture checks. Is the pin supplied ready for use out of the box? Yes, the test pin is supplied as a single workshop‑grade item in a protective transport case to preserve geometry during storage and transit. Which materials is the gauge pin made from? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance in routine inspection tasks. Can this pin be used for fixture setup and calibration checks? The gauge pin is designed for end‑dimension checks, fixture alignment and compatibility with standard pin holders and gauge block setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.87mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of ±0.001 mm repeatability and a compact Ø 1.87 mm, 50 mm form factor to secure reproducible end‑measurements and go/no‑go checks in busy workshops; order directly from Metav Werkzeuge or consult the team for application advice. Gauge pin, single, Ø 1.87 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin is a workshop‑grade measuring mandrel designed for precise end‑measurements and insertion checks in precision engineering and quality control. Workshop‑grade design for robust use Diameter Ø 1.87 mm with ±0.001 mm tolerance 50 mm hardened measuring length for stability Made from special steel for wear resistance Precision where smallest deviations matter The compact measuring mandrel delivers a tolerance of ±0.001 mm, making it suited to tasks where micrometre accuracy is required. A Ø 1.87 mm diameter combined with a 50 mm length provides a stable contact surface that reduces bending and run‑out during insertion checks. This level of control helps maintain product conformity and reduces the risk of downstream rejects, so process reliability is improved and inspection cycles become more predictable. The component’s minimal form factor also eases storage and immediate access at the inspection bench. Robust construction for repeatable measurement Constructed from special steel and finished for workshop use, the pin balances hardness with surface finish to preserve measurement integrity over many cycles. The 50 mm measuring length gives sufficient engagement for most plug and end‑measurement tasks while remaining stiff enough for manual handling. Where repetitive checks are routine, the durable material and workshop execution minimise wear‑related drift and thus prolong the interval between rework or replacement, reducing long‑term operating costs. Practical application in quality control routines This precision probe is ideal for insertion and end‑measurement checks in small bore gauges, fixture verification and component acceptance testing. The narrow diameter suits fine bores and small features typical in precision machining, toolmaking and instrument manufacture. Marking and traceability are straightforward thanks to the SKU M323.187 and GTIN record, which supports inventory control and process documentation for quality management systems. Integration and handling guidelines Fitting the pin into inspection fixtures or comparator setups is uncomplicated due to the standardised cylindrical form. Gentle handling and clean contact surfaces preserve the ±0.001 mm performance; avoid abrasive cleaning and use appropriate storage to prevent nicks. The lightweight construction (approx. 0.004 kg) makes the part easy to position, while the workshop design tolerates regular handling encountered in production environments. Choose the Metav IndustryLine gauge pin M323.187 for reliable, repeatable small‑feature inspection — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.187 GTIN: 4061905054853 Brand: Metav IndustryLine Category: Messstifte ECLASS: 21170231 Facts Diameter: 1.87 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop execution SKU: M323.187 Label: Prüfstift, einzeln, 1,87mm, +/- 0.001 mm Länge 50 mm FAQ What level of accuracy can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.001 mm, indicating micrometre‑class repeatability suitable for fine inspection work. Is the pin suitable for small bore insertion checks and go/no‑go testing? Yes — the Ø 1.87 mm diameter and 50 mm length make the pin appropriate for small bore verification and routine go/no‑go assessments. Which material is used and what does that mean for wear resistance? The pin is made from special steel with a workshop finish, offering a balance of hardness and surface quality that supports extended service life under regular inspection use. Can this item be integrated into existing fixtures and gauges? The standard cylindrical geometry and documented SKU facilitate straightforward integration into inspection fixtures, small bore comparators and test jigs. How is traceability handled for inventory and quality records? The product is listed under SKU M323.187 with GTIN 4061905054853, which supports inventory control and documentation for quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.88mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Benefit from a combination of ultra-fine accuracy, a robust special-steel body and a compact 50 mm length for reliable end measurements; order the gauge pin directly via Metav Werkzeuge or consult our specialists if clarification is required. Gauge pin M323.188 — single gauge pin, 1.88 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) A gauge pin M323.188 designed for pinpoint end‑measurement tasks in workshop inspection and precision gauging. Diameter 1.88 mm for tight fits Tolerance ±0.001 mm for high precision 50 mm length, workshop execution Supplied in transport case for protection Accuracy that reduces rework and scrap The gauge pin achieves an exceptional ±0.001 mm tolerance, making it suitable where even minute deviations affect assembly performance. This level of precision translates directly into fewer rejects and less rework on mating parts: when end measurements are trustworthy, downstream processes run more predictably. The small diameter of 1.88 mm is ideal for verifying bores, pin fits and end positions in jigs and fixtures; the dimensional requirement for such tasks is explained plainly here — a tolerance of one thousandth of a millimetre means the pin will reveal deviations that are invisible to coarser gauges. Built for the workshop — durable and easy to handle Manufactured from special steel, the test pin combines surface hardness with corrosion resistance to withstand repeated use in a busy shop environment. The 50 mm length offers a practical balance between reach and rigidity: long enough to probe deeper seats yet short enough to avoid flex under hand inspection. The item is delivered in a protective transport case, which simplifies storage and reduces the risk of damage during transit. The workshop configuration emphasises serviceability and durability, so routine use does not erode reliability. Fast integration into inspection workflows Traceable identification and straightforward specifications mean the pin integrates easily with existing gauges and inspection routines. The compact design supports rapid checks at the bench or inline control points, shortening cycle times and supporting a more efficient quality loop. As a Metav IndustryLine component, the pin benefits from a quality screening process based in Emmerich, which supports consistent supply and quick clarification of technical queries. For projects requiring component-level testing or verifying end measures during assembly, this gauge pin is an efficient, low-overhead option. For precise end-measurements and dependable workshop performance, contact Metav Werkzeuge to request the M323.188 gauge pin and discuss delivery or technical details with our Emmerich team Technical Data Article number: M323.188 GTIN: 4061905055331 Category: Gauge pins Facts Diameter: 1.88 mm Length: 50 mm Weight: 0.004 kg Accuracy: ±0.001 mm Special features Material: special steel Workshop execution Supplied in transport case FAQ What tolerances can be checked with this gauge pin? The gauge pin M323.188 supports verification to ±0.001 mm, allowing inspection of fits and end positions where micrometre-level accuracy is required. Is the pin suitable for repeated workshop use? Yes, the workshop execution and special steel construction make the M323.188 robust enough for frequent checks while preserving dimensional stability. Does the product include protective packaging? The gauge pin is supplied in a transport case to protect the surface and ensure safe handling during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.89mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Combining sub-micron repeatability, a compact 50 mm working length and a hard-wearing special‑steel construction, this gauge pin provides dependable end‑dimension verification in production and inspection settings. Order the single gauge pin directly via Metav Werkzeuge or request advice from our consultants for application support. Gauge pin M323.189 — single inspection pin, 1.89 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.189 is a precision inspection pin for end‑dimension verification and plug‑gauge tasks in workshop and production metrology. Single gauge pin 1.89 mm diameter High precision ±0.001 mm tolerance 50 mm hardened special‑steel length Supplied in protective transport case Precise end‑dimension checks with measurable confidence The compact inspection pin delivers a diameter of 1.89 mm with an exceptional tolerance of ±0.001 mm, enabling highly repeatable end‑measurements for go/no‑go checks and verification of mating bores. The extremely fine tolerance corresponds to one micrometre resolution in practical use, which reduces rework and speeds decision cycles on the shop floor. This level of precision is particularly valuable for small‑part production where component fit and assembly depend on consistent end‑dimensions. Built for workshop use and frequent handling Designed as a workshop edition, the pin is manufactured from special steel and finished to withstand repetitive insertion and inspection routines. With a 50 mm working length and a compact form factor, the pin balances accessibility and stiffness for reliable tactile feedback during manual checks. Delivery in a protective transport case ensures the measuring surface remains free from contamination and impact damage during storage or transit, preserving long‑term accuracy. Integrates smoothly into measurement routines The inspection pin supports straightforward integration into standard metrology setups and fixture‑based control points. Its single‑piece design simplifies handling and quick substitution in test benches or inspection gauges, while the precise nominal diameter provides a clear reference for comparative assessments. For production control, the pin is a pragmatic choice where fast, repeatable verification of bore sizing and end‑dimensions improves throughput and reduces measurement uncertainty. For assured end‑dimension control, request the Metav IndustryLine gauge pin M323.189 from Metav Werkzeuge or consult our Emmerich team for tailored measurement guidance and order coordination Technical Data Article number: M323.189 GTIN: 4061905055348 Description: Single gauge pin, 1.89 mm, ±0.001 mm, length 50 mm Manufacturer brand: Metav IndustryLine Core specifications Diameter: 1.89 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.004 kg Features Workshop edition Material: special steel Supplied in protective transport case Category: Gauge pins / Inspection pins ECLASS: 21170231 FAQ What accuracy can be expected from this gauge pin? The Metav IndustryLine gauge pin M323.189 is specified at ±0.001 mm, providing micrometre‑level repeatability suitable for high‑precision inspection tasks. Is the pin suitable for routine production checks? Yes, the single inspection pin is intended for repetitive end‑dimension verification and integrates into production control routines where fast, dependable checks are required. What material is the pin made from and how durable is it? The pin is manufactured from special steel and finished for workshop use, offering robustness for frequent handling and insertion cycles. Does the delivery include protection for transport and storage? The product is supplied in a protective transport case to preserve the measuring surfaces during storage and transit. What are the physical dimensions and mass of the pin? Nominal diameter 1.89 mm, length 50 mm, weight approximately 0.004 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.8mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Combine ±0.001 mm repeatability with a 1.80 mm diameter and a 50 mm working length to secure reliable end‑dimension checks in routine inspection tasks; order the gauge pin directly through Metav Werkzeuge or consult our specialists for application guidance. Test pin M323.180 — Gauge pin, 1.80 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Test pin M323.180 is a workshop‑grade gauge pin designed for precise end‑dimension verification and tight‑tolerance inspection tasks in production and quality control. Tolerance ±0.001 mm for sub-micron checks Diameter 1.80 mm for fine-feature inspection Length 50 mm, workshop-grade construction Precision that minimises inspection uncertainty The M323.180 is engineered for high-precision measurement where small tolerances matter. With a declared variation of ±0.001 mm, the pin supports sub‑micrometre repeatability in comparative and end‑dimension checks. This level of accuracy reduces decision ambiguity during go/no‑go assessments and shortens corrective loops in quality control, allowing predictable, traceable results even on small bores and fine features. Robust design for dependable workshop use Manufactured from Special steel and offered as a workshop‑grade item, the gauge pin combines surface integrity with practical handling for repetitive inspection. The 50 mm overall length and compact 1.80 mm diameter make it easy to position by hand or in simple fixtures; the slim profile is particularly useful for confined checks while maintaining stiffness adequate for routine shopfloor use. The construction is optimised for longevity under frequent contact with mating parts. Suited for integration into inspection routines Intended for end‑dimension verification, the gauge pin serves as a reliable reference in bench inspections, fixture set‑ups and manual go/no‑go testing. Its clear nominal size and tight tolerance simplify documentation and traceability during sampling plans. For operations focused on measurable improvement, the component supports consistent measurement practice and helps to anchor in‑process quality checks within established workflows. Discuss application details with Metav Werkzeuge to confirm fitment for specific inspection tasks and to request the M323.180 gauge pin or tailored meter recommendations. Technical data Article number: M323.180 GTIN: 4061905054785 Label: Test pin, single, 1.80 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 1.80 mm Length: 50 mm Tolerance/variation: ±0.001 mm Weight: 0.004 kg ECLASS: 21170231 Special features Material: Special steel Workshop version (Werkstatt-Ausführung) Category: Gauge pin / Test pin Story trigger: end-dimension checks FAQ What tolerance does this gauge pin provide? The test pin M323.180 from Metav IndustryLine is specified with a variation of ±0.001 mm. Which materials is the pin made from? The M323.180 gauge pin is manufactured from special steel, selected for surface integrity and repeatable contact performance. What inspection tasks is the pin suited for? The pin is designed for end‑dimension verification, manual go/no‑go checks and fixture set‑ups where a 1.80 mm reference diameter and tight tolerance are required. How is the product identified for ordering? Order using the article number M323.180 or the GTIN 4061905054785 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.91mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micron-level repeatability, a slim profile for narrow bores and a robust workshop design for dependable end-measurement tasks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.191 — precision test pin, 1.91 mm, ±0.001 mm, 50 mm length The Gauge pin M323.191 is a compact precision test pin designed for end-measurement and gauging tasks in workshop and inspection environments. Workshop version for robust everyday use Diameter 1.91 mm for narrow bores Tolerance ±0.001 mm for micron precision 50 mm length for end-measurement tasks Micron-level repeatability that protects process quality A tolerance of ±0.001 mm (one micron) places this gauge pin in the class of precision inspection tools suited to high-accuracy tasks. That numerical tolerance means the pin can be used where repeatable fits and clearances are critical, for example when verifying bore roundness, plug fits or end dimensions on small components. The fine tolerance reduces the risk of rework and helps to maintain consistent assembly quality, so measuring routines become a reliable control point rather than an uncertain step. The M323.191 designation simplifies procurement and traceability in quality documentation. Slim profile for tight bores and accurate end measurements With a diameter of 1.91 mm and a length of 50 mm, the pin is tailored for narrow or deep bores where thicker gauges cannot access without disturbance. The slender geometry enables snug fit checks, alignment aids and the transfer of a defined datum in fixtures. The 50 mm working length balances reach with rigidity, keeping deflection low during insertion and withdrawal. In practical terms, that means more consistent gauge readings and fewer measurement artefacts when inspecting small components or precision bores. Workshop execution and material choice for durability Manufactured from special steel, this test pin offers dimensional stability and resistance to routine workshop wear. The designation "workshop version" signals a construction that tolerates frequent handling and process use while maintaining the specified accuracy. Simple maintenance—cleaning and gentle protection against corrosive atmospheres—preserves the measurement datum and prolongs service life. The compact mass (lightweight construction) also makes the pin easy to handle during repeated checks or in automated feeding arrangements. Clear procurement data and integration into inspection routines Technical identifiers simplify stockkeeping and quality records: the item is listed under SKU M323.191 and can be referenced in inspection plans and procurement lists. The small footprint and defined specification make this pin suitable as a standard inspection tool in toolrooms, assembly benches and first-off checks. Metav IndustryLine supplies the product as part of a broad range of metrology items, backed by the company’s logistics and quality filtering in Emmerich, which supports consistent availability for workshops and production lines. Contact Metav Werkzeuge to discuss how the Metav IndustryLine gauge pin M323.191 fits into existing inspection routines and to arrange immediate supply from Emmerich. Technical data SKU: M323.191 GTIN: 4061905055362 Material: Special steel Weight: 0.004 kg Length: 50 mm Core technical data Diameter: 1.91 mm Tolerance (deviation): ±0.001 mm Length: 50 mm Mass: 4 g Special features Workshop version (robust construction) Designed for end-measurement and gauging tasks Compact geometry for narrow bores ECLASS: 21170231 FAQ What is the measurement tolerance of this gauge pin? The measurement tolerance is ±0.001 mm for the gauge pin M323.191 (Metav IndustryLine, SKU M323.191), suitable for micron-level inspection. Which material is used for the pin? The pin is made from special steel, selected for dimensional stability and workshop durability for the Metav IndustryLine gauge pin M323.191. For which applications is the pin intended? This test pin is intended for end-measurement, bore gauging and plug-fit checks on small components where a 1.91 mm diameter probe and a 50 mm length are required. How should the pin be stored between uses? Store the pin clean and dry to protect the datum; gentle handling and routine cleaning maintain the specified ±0.001 mm accuracy for the Metav IndustryLine pin. How is the product identified for procurement and documentation? Use SKU M323.191 and GTIN 4061905055362 to reference the exact Metav IndustryLine gauge pin in purchasing and inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.92mm Gauge Pin Length 50mm ±0.001mm, Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.001 mm accuracy, Ø 1.92 mm compact diameter and a 50 mm length for reproducible end‑measure checks — order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.192 gauge pin – Ø 1.92 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.192 gauge pin is a single, workshop‑grade precision pin designed for end‑measure and fit checks in small‑bore components and assembly jigs. High precision ±0.001 mm tolerance Diameter Ø 1.92 mm for small bores Robust special steel, workshop version Supplied in transport case for protection Reduce rejects with verifiable tolerance control A tolerance of ±0.001 mm delivers measurable benefits for quality assurance: fewer false rejects, consistent fits and reliable go/no‑go decisions in serial or small‑batch production. The exceptionally tight tolerance makes the pin suitable for incoming inspection and final dimensional checks where reproducibility is essential. By converting microscopic dimensional certainty into predictable assembly behaviour, the pin supports shorter inspection cycles and a lower scrap rate. Durable construction for repeated handling Manufactured from special steel in a workshop specification, the pin combines wear resistance with dimensional stability under normal shop conditions. The material choice and hardened finish ensure that repeated insertion and withdrawal do not significantly alter the measuring diameter, which preserves long‑term accuracy and reduces replacement frequency. This robustness is particularly valuable for high‑throughput inspection stations where downtime and tool turnover translate directly into cost. Compact geometry for small assemblies and precise seating With a diameter of 1.92 mm and a 50 mm length, the pin is tailored to access narrow bores and tight clearances while still providing sufficient engagement length for stable measurement. The compact form factor simplifies handling in confined assemblies and fixtures, enabling precise alignment and end‑mass checks that would be difficult with bulkier tools. Its geometry supports exact seating in gauges and jigs, helping to guarantee interchangeability across mating parts. Workshop ready and protected for transport Supplied in a transport case, the pin arrives ready for workshop use and organised storage, reducing the risk of handling damage and corrosion during transit. The workshop‑grade finishing and lightweight design ease manual handling on busy benches and during routine inspections. Supplied as a single item, the configuration suits calibration trays or bespoke sets where individual pins are stored and tracked. Contact Metav Werkzeuge in Emmerich for specification advice or to request the M323.192 gauge pin; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for rapid, expert assistance Technical Data Article number: M323.192 GTIN: 4061905055850 Manufacturer: Metav IndustryLine Weight: 0.004 kg Facts Diameter: 1.92 mm Length: 50 mm Tolerance: ±0.001 mm Special features Workshop version Delivery in plastic/wooden case for transport Single gauge pin Category: Gauge pins FAQ What is the dimensional tolerance of this gauge pin? The M323.192 gauge pin is specified to ±0.001 mm, making it suitable for high‑precision end‑measure and fit checks in small‑bore applications. What material is the pin made from? The gauge pin is manufactured from special steel in a workshop specification, delivering wear resistance and dimensional stability for repeated inspection tasks. For which tasks is this pin recommended? The pin is intended for end‑mass checks, bore gauging and assembly verification of small components where a Ø 1.92 mm diameter and tight tolerance ensure reliable seating and measurement. How is the pin delivered for storage and transport? The pin is supplied in a protective transport case, which simplifies handling, organisation and protection during movement within the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.93mm Test Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of high repeatability through ±0.001 mm tolerance and a compact 1.93 mm diameter in a robust 50 mm length for reliable end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.193 Gauge pin — 1.93 mm, ±0.001 mm, 50 mm (Metav IndustryLine) M323.193 is a single gauge pin designed for precise plug‑type inspection and reference measurements in workshop environments and small‑part inspection tasks. High dimensional accuracy ±0.001 mm Hardened special steel, workshop version 50 mm nominal length for recessed features Precision for repeatable inspection results The M323.193 gauge pin is manufactured to a tight ±0.001 mm tolerance, offering a measurable improvement in dimensional accuracy when used as a go/no‑go reference or for verification of bore finishes. The small 1.93 mm diameter makes it suitable for fine hole checks and end‑measurement tasks where minimal clearance is required. Specified tolerances support consistent pass/fail decisions during quality control and reduce rework by providing an unequivocal reference for machining tolerances. Robust construction for everyday workshop use Built from special steel and labelled as a workshop version, this inspection pin combines the stiffness required for precise seating with the resilience needed for frequent handling. The 50 mm length permits engagement in slightly recessed features while maintaining stability during measurement. The single‑piece delivery and compact mass aid quick handling in busy inspection routines, helping teams maintain throughput without compromising on measurement confidence. Integration into inspection workflows and traceability Designed as a straightforward plug gauge, the item integrates easily into manual measurement sequences and fixture checks. Markings and the supplied article data facilitate traceable record‑keeping for production lots and inspection reports. Lightweight and compact, the pin supports fast changeover between checks and is compatible with common bench measurement tools, enabling concise documentation of nominal measurements and deviations. Practical benefits for production and quality assurance Using a dedicated gauge pin with such fine tolerance reduces ambiguity at critical inspection stages and supports rational decision‑making: fewer ambiguous rejects, clearer quality records and more predictable process control. The combination of precision, compact diameter and usable length makes this inspection pin a pragmatic choice for metrology tasks that demand exact fit verification without elaborate fixturing. Consult Metav Werkzeuge for application guidance on the M323.193 gauge pin and secure expert recommendations tailored to specific inspection challenges at our Emmerich site Technical Data Article number: M323.193 GTIN: 4061905055867 Label: Gauge pin, single, 1.93 mm, ±0.001 mm, length 50 mm Weight: 0.004 kg Core data Diameter nominal: 1.93 mm Tolerance: ±0.001 mm Length nominal: 50 mm Quantity: single piece Features and materials Material: special steel Version: workshop execution Application: plug‑type inspection and reference measurement Packaging: individual supply FAQ What nominal diameter does the pin have? The gauge pin has a nominal diameter of 1.93 mm, specified for fine bore and end‑measurement applications. What tolerance and repeatability can be expected? Manufactured to ±0.001 mm, the pin provides high repeatability suitable for strict inspection criteria and clear go/no‑go referencing. Is the pin delivered as a single item or in sets? This article is supplied as a single gauge pin, intended for direct integration into inspection benches and tool kits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.94mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel in Case - Metav IndustryLine
Benefit from the ±0.001 mm tolerance and the special steel construction for repeatable end‑measurement references; compact 50 mm length makes workshop handling straightforward — order the gauge pin directly via Metav Werkzeuge or contact our consultants for tailored advice. M323.194 Gauge Pin (Ø 1.94 mm) — ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) A M323.194 gauge pin designed for precise end‑measurement checks and reference fits in workshop and inspection applications. Workshop execution, hardened body Tight tolerance ±0.001 mm Diameter Ø 1.94 mm, length 50 mm Precision that secures dimensional control The gauge pin delivers a measured diameter of 1.94 mm with a stated accuracy of ±0.001 mm, making it suitable where tight clearances and reproducible fits are required. This level of precision supports reliable reference measurements and helps to reduce uncertainty in assembly and inspection processes. The compact design keeps thermal mass low and minimises handling errors while the slim profile is ideal for small bores and plug gauges. Robust build for everyday workshop use Manufactured from special steel, the pin is engineered for workshop durability and long service life. The workshop execution indicates enhanced resistance to knocks and frequent handling, ensuring the dimension stays within specification during routine use. Delivered in a transport case, the component arrives protected for storage and safe transfer between bench and machine, which preserves calibration and surface condition over time. Practical handling and application benefits With a length of 50 mm, the pin offers a practical working reach without compromising stiffness; this makes it easy to seat and withdraw in bores or gauge blocks. The modest weight supports single‑handed use and quick interchange in measuring fixtures. As a single precision pin, it is an economical option for establishing end limits, setting up jigs or checking hole diameters in series production where repeatability is essential. Quality assurance and traceability The product is supplied under the Metav IndustryLine range and carries a clear identifier M323.194, allowing traceable inventory and straightforward reference in quality records. The use of a consistent material and workshop specification ensures predictable wear behaviour and supports scheduled replacement or inspection intervals within quality systems. Contact Metav Werkzeuge today to discuss whether the M323.194 gauge pin fits your measuring chain or to request sample availability from our Emmerich stock. Technical data Article number: M323.194 GTIN: 4061905055874 Manufacturer: Metav IndustryLine Material: Special steel Diameter: 1.94 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Core specifications Diameter Ø: 1.94 mm Nominal length: 50 mm Accuracy: ±0.001 mm Mass: 0.004 kg Special features Workshop execution Delivered in transport case Suitable for end measurements SKU: M323.194 FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.001 mm, providing high repeatability for end‑measurement tasks. Which material is the pin made from? The pin is manufactured from special steel, selected for durability in workshop environments. Is the pin supplied protected for transport? Yes, delivery includes a transport case to protect the pin during shipment and handling. For which measurement tasks is this pin intended? The component is designed for end‑measurement checks, reference fits and small‑bore inspections where a 1.94 mm reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.95mm Gauge Pin Precision ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of traceable ±0.001 mm accuracy, compact 1.95 mm diameter and robust workshop design for reliable in-process checks and reduced rework. Order the part directly via Metav Werkzeuge or contact their consultants for specification matching. Gauge pin M323.195 — precision gauge pin, 1.95 mm diameter, ±0.001 mm accuracy A gauge pin M323.195 designed for high‑resolution hole verification and end‑measure checks in workshop metrology. Workshop version for industrial use Diameter 1.95 mm with ±0.001 mm tolerance Length 50 mm for versatile checking Special steel construction for durability Accuracy that secures process reliability The gauge pin delivers an exceptionally fine ±0.001 mm tolerance, making it suitable where small deviations drive scrap rates and rework costs. With a nominal diameter of 1.95 mm, the hardened rod provides a defined reference for through‑holes and bores, enabling quick pass/fail checks during setup and batch inspection. Using a fixed pin as a mechanical reference reduces measurement variability compared with ad‑hoc checks and supports repeatable gauge‑based control points in production. Robust design for everyday workshop demands Built as a workshop version, the pin combines a slim profile with a special steel alloy selected for wear resistance and dimensional stability. The 50 mm length offers adequate engagement for most bore depths encountered in small to medium assemblies while keeping handling simple. Lightweight at approximately 4 g, the component is easy to manoeuvre in jigging and fixture work. Delivery includes transport protection in a dedicated case to preserve the reference surface during storage and transit. Streamlined quality routines and traceability The item is supplied as a single precision gauge with clear identification (SKU M323.195, GTIN 4061905055881), facilitating inventory control and traceability in quality documentation. As a defined end measure, the pin is suitable for routine go/no‑go verifications, assembly fixtures and comparative checking against calibrated standards. Integrating a fixed‑dimension pin into inspection jigs shortens measurement cycles and helps maintain consistent acceptance criteria across shifts. Request availability or a technical consultation for the Metav IndustryLine M323.195 gauge pin from Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fit for purpose and delivery options Technical data Article number: M323.195 GTIN: 4061905055881 Material: Special steel Diameter: 1.95 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Facts Category: Gauge pins (Messstifte) Version: Workshop execution Packaging: Supplied in transport case SKU: M323.195 Special features End‑measure application Single pin delivery Robust surface finish for repeated use Compact, easy‑to‑handle geometry FAQ What is the principal use of this gauge pin? The M323.195 gauge pin is intended for high‑precision hole verification and end‑measure checks in workshop and production environments. Which materials is the pin suitable for checking? The gauge pin itself is made from special steel and is used as a dimensional reference for components irrespective of workpiece material; the M323.195 serves as a mechanical reference in fixtures and inspection jigs. How is the part delivered and protected? The M323.195 is supplied individually and protected in a transport case to maintain the reference surfaces during storage and transit. Can the pin be used in routine production inspection? Yes, the gauge pin M323.195 is designed for repeated go/no‑go and comparative checks to speed up routine quality control tasks. How is the item identified for inventory and traceability? Identification is supported by SKU M323.195 and GTIN 4061905055881 for clear traceability in stock and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.96mm Gauge Pin Length 50mm ±0.001mm Workshop Version In Plastic Case - Metav IndustryLine
Take advantage of the combination of ultra‑fine accuracy, compact format and a robust workshop design for reproducible reference measurements. The tight ±0.001 mm tolerance together with a 1.96 mm nominal diameter ensures stable pass/fail control and reduced rework. Order the part directly via Metav Werkzeuge or request advice from our consultants. Gauge pin M323.196 — 1.96 mm diameter, ±0.001 mm accuracy, 50 mm length (Metav IndustryLine) A gauge pin M323.196 engineered for precise end‑measure checks and fine workshop gauging, ideal as an inspection reference in small‑part production and assembly. High-precision ±0.001 mm tolerance 1.96 mm nominal diameter 50 mm working length Special steel; workshop version; transport box Stabilise inspection routines with micrometre-level precision The Metav IndustryLine gauge pin M323.196 delivers a defined measurement reference by combining a ±0.001 mm tolerance with a small nominal diameter. In practice this means clearer go/no‑go decisions on production lines and fewer ambiguous measurements during assembly checks. The narrow tolerance reduces statistical spread in manual verification steps, supporting faster process control and a lower scrap rate. The specification is particularly relevant where tight fits and end‑dimensions determine final part acceptance. Compact design for fine mechanical and precision tasks Classified in the micro range, this inspection pin sits within the segment optimised for fine mechanical work (measurement ranges up to 100 mm). The 1.96 mm diameter and 50 mm length create a short, torsion‑resistant profile that is well suited to watchmaking, connector production and small gear inspection. The compact geometry keeps handling straightforward while maintaining repeatability, so setup times are reduced and operator fatigue is minimised during repetitive checks. Robust workshop execution that protects measurement integrity Manufactured from special steel in a workshop edition, the pin is engineered for routine use in shop environments where resilience matters. The low mass and slim profile make positioning effortless, while the supplied transport box protects the reference surface during storage and transport. The construction supports reliable seating in gauges and fixtures, helping to maintain surface condition and dimensional constancy across multiple measurement cycles. Metav’s quality filter in Emmerich ensures consistent supply and traceable product handling for industrial buyers. For procurement or technical matching of Metav IndustryLine gauge pins, contact Metav Werkzeuge to arrange supply or consult on integration with existing inspection fixtures. Technical data Article number: M323.196 GTIN: 4061905055898 Category: Gauge pins Version: Workshop edition Facts Nominal diameter: 1.96 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Special features Material: Special steel Supplied in transport box for protection during transport Workshop execution for routine use Accuracy class: high‑precision ±0.001 mm FAQ What is the nominal diameter of this inspection pin? The nominal diameter is 1.96 mm for the gauge pin M323.196 from Metav IndustryLine. How tight is the dimensional tolerance? The device is specified to ±0.001 mm, offering high‑precision reference for end‑measure checks. Is the pin supplied ready for workshop use? Yes, the workshop execution of the Metav IndustryLine gauge pin is supplied in a transport box to protect the measuring surfaces during handling and storage. Which applications suit this small‑format pin? The pin is intended for micro‑range measurements: fine mechanical parts, connector inspection and small assembly control where a short, rigid probe improves repeatability. Can this pin be used as a master for go/no‑go fixtures? The high accuracy and stable geometry make the M323.196 suitable as a reference master in fixture setups and comparative checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.97mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine dimensional control and workshop robustness for reliable locating and go/no‑go checks. The high ±0.001 mm tolerance and compact 1.97 mm diameter ensure consistent repeatability in fixture setting and inspection; order the gauge pin directly via Metav Werkzeuge or contact our consultants for batch supply and technical advice. M323.197 Gauge Pin – ø 1.97 mm, ±0.001 mm, 50 mm (Metav IndustryLine) A M323.197 gauge pin engineered for precise diameter verification and accurate locating in workshop metrology and fixture set‑up applications. Workshop version for robust use Diameter tolerance ±0.001 mm for micro accuracy Length 50 mm suitable for fixture and gauge blocks Delivered in a transport case for secure handling Precision where micrometres count The gauge pin provides an exceptionally fine tolerance of ±0.001 mm (1 µm), which translates into reliable dimenÂsional checks and minimal uncertainty when setting tools, jigs or locating pins. Such a narrow tolerance supports repeatable fits and is especially useful where small clearance or interference conditions must be controlled. The small diameter combined with the fine tolerance makes this component ideal for calibration tasks, plug‑gauge comparison and critical locating points in assembly operations. Built for everyday workshop use Presented in a workshop version, the pin balances delicate accuracy with handling resilience. The item is machined from special steel, providing a stable form for tactile measuring and routine use at the bench. The 50 mm length offers sufficient engagement for depth and shoulder locating while remaining easy to position in fixtures. Supplied as a single pin, it suits both singular inspection points and incremental quality checks on small batches. Practical handling and traceability benefits Safe transport and organisation are supported by delivery in a protective transport case, reducing the risk of damage and contamination between uses. The compact weight and format mean straightforward storage and quick retrieval during setup procedures. As part of a metrology toolkit, this gauge pin pairs well with micrometers, comparator stands and gauge blocks to form concise measurement chains that speed up inspection without compromising accuracy. For precision locating and reliable micro‑inspection, request the M323.197 gauge pin from Metav Werkzeuge or consult the Metav Werkzeuge team in Emmerich for tailored supply and technical specification advice. Technical data Article number: M323.197 SKU: M323.197 GTIN: 4061905055904 ECLASS: 21170231 Facts Diameter: 1.97 mm Tolerance: ±0.001 mm (1 µm) Length: 50 mm Weight: 0.004 kg Special features Workshop version Material: special steel Delivered in transport case (plastic/wood) Single gauge pin FAQ What is the exact tolerance of this gauge pin? The tolerance of the M323.197 gauge pin is ±0.001 mm, equivalent to 1 µm, making it suitable for high‑precision locating and inspection tasks. Which material is used for the pin and how does it affect use? The pin is made from special steel, chosen for dimensional stability and workshop durability; this material supports repeated seating without rapid wear. Is the pin supplied ready for use out of the box? Yes, the M323.197 is supplied as an individual gauge pin in a protective transport case, ready for immediate use in fixture set‑up and inspection routines. For which applications is this gauge pin most suitable? It is intended for precise diameter verification, locating dowels and plug‑gauge comparison in workshop metrology, fixture assembly and small‑part inspection. Can this pin be used together with gauge blocks or micrometers? The pin integrates well into measurement chains and is compatible with gauge blocks, micrometers and comparator arrangements to form fast, repeatable checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.98mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
The combination of ultra‑fine tolerance and compact length offers reliable end‑measurement for fixture checks and serial inspection. With a nominal diameter of 1.98 mm and a tolerance of ±0.001 mm, this workshop‑grade pin supports reproducible results and reduced rework. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.198 — single inspection pin, 1.98 mm ±0.001 mm (Metav IndustryLine) A Gauge pin M323.198 designed for accurate end‑dimension checks and fixture verification in workshop and inspection environments. Precision tolerance ±0.001 mm Nominal diameter 1.98 mm Length 50 mm for fixture checks Workshop design, robust construction Consistent measurement where micrometres meet the shop floor The inspection pin delivers industrially relevant precision with a declared tolerance of ±0.001 mm, making it suitable for repeatable end‑measurements and gauge setting. A narrow nominal diameter of 1.98 mm means the pin can be used in small bores and alignment tasks where fine fit and low clearance are critical. This level of accuracy reduces the need for repetitive adjustments and supports efficient quality control routines, translating directly into less downtime and more predictable process outcomes. Robust design for daily workshop use Manufactured from special steel, the pin balances hardness with dimensional stability to withstand frequent handling in a workshop environment. The 50 mm length is optimised for fixture and gauge plates, providing adequate reach without compromising rigidity. Its light mass contributes to fast handling during inspection sequences while the workshop design ensures resistance to routine wear. Where compact, dependable test artefacts are required, this pin provides a straightforward solution that complements existing inspection kits. Practical advantages that improve workflow As a single, dedicated test pin, the component simplifies inventory and replacement practices for maintenance teams and quality technicians. The small footprint and low weight facilitate quick insertion and extraction during serial checks, shortening cycle times on repetitive measurements. Traceable identification via SKU and GTIN supports inventory control and documentation, while the construction material and tolerance class help to maintain measurement confidence across batches and operators. For workshop‑grade end‑measurement select the Metav IndustryLine gauge pin M323.198 and contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: M323.198 GTIN: 4061905056703 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 1,98mm, +/- 0.001 mm Länge 50 mm Facts Nominal diameter: 1.98 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop version Single inspection pin Intended for end‑measurement and fixture checks FAQ What tolerance can be expected from this inspection pin? The inspection pin is specified with a tolerance of ±0.001 mm, providing the fine accuracy required for high‑precision end and fit measurements. Which materials is the pin made from and how does that affect wear? The pin is made from special steel, offering a balance of hardness and dimensional stability that supports regular workshop use while resisting typical wear. For which applications is this pin most suitable? This single test pin is suited to end‑dimension checks, bore gauging and fixture verification where a 1.98 mm nominal diameter and 50 mm length meet the inspection requirement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.99mm Gauge Pin Single ±0.001mm Accuracy 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm micro‑accuracy, robust special‑steel construction and a compact 50 mm length for repeatable end‑measurements and tight‑fit checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored technical advice. Gauge pin M323.199 – 1.99 mm, ±0.001 mm accuracy (Metav IndustryLine) The gauge pin M323.199 is a single test pin designed for precision end‑measurements and bore verification in workshop and inspection environments. ±0.001 mm high precision tolerance Ø 1.99 mm for fine bore checks 50 mm hardened special‑steel length Delivered in protective case for transport Engineered precision for reproducible checks High repeatability is achieved through the ±0.001 mm tolerance, which reduces measurement uncertainty and supports consistent quality control in small‑bore applications. The very small 1.99 mm diameter is suited to tight fits and fine components where even minor deviations affect assembly behaviour; choosing a purpose‑made test pin eliminates the variability introduced by improvised mandrels. This level of dimensional control is particularly valuable when verifying press fits, gauging alignment of mating parts or sampling production batches to confirm process stability. Workshop resilience with compact handling benefits Constructed from special steel and finished for workshop duty, the pin combines wear resistance with a compact 50 mm length that is easy to handle and store. The workshop specification ensures robustness under routine handling and frequent insertion cycles, extending tool life and reducing downtime for replacement. Supplied in a protective case for transport, the component arrives ready for secure storage and safe transit between job sites or inspection stations, supporting streamlined workflow in a busy production environment. Practical integration into inspection and tooling routines As a single, precision probe the component fits naturally into manual inspection benches, fixture setting and go/no‑go checking sequences. Its simple geometry makes it compatible with standard probe holders and indexing fixtures, enabling straightforward integration without complex adaptation. For inventory and traceability the item is listed under Metav IndustryLine and is suitable for use wherever compact, high‑accuracy pins are required to confirm bore diameters or to act as reference mandrels in assembly verification. Secure the Metav IndustryLine 1.99 mm gauge pin through Metav Werkzeuge for stock confirmation and specialist procurement advice — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M323.199 GTIN: 4061905056710 Category: Test pins Facts Diameter: 1.99 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: special steel Workshop version Delivered in protective case Single test pin FAQ What tolerance does this test pin offer? The gauge pin M323.199 provides a tolerance of ±0.001 mm, suitable for high‑precision bore checks and end‑measurements. What are the exact dimensions of the pin? The pin has a diameter of 1.99 mm and a nominal length of 50 mm. What material is used for the pin? This Metav IndustryLine test pin is made from special steel, optimised for workshop durability. Is the pin supplied ready for transport? Yes, the item is delivered in a protective case to ensure safe transport and storage. Can the pin be used in fixture and gauge holders? The simple, cylindrical geometry of the gauge pin M323.199 makes it compatible with common probe holders and indexing fixtures for manual inspection or fixture setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.9mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of highly reproducible measurement through a combination of sub‑micron tolerance, robust special steel construction and a protective transport case for safe handling; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.190 — precision test pin, 1.90 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.190 is a single, ground test pin intended for end‑measurements and alignment tasks in workshop inspection and small‑part production. Precision ±0.001 mm tolerance Diameter exactly 1.90 mm for end measurements Robust special steel for wear resistance Delivered in a protective transport case Consistent measurement where tolerances matter The M323.190 is engineered to provide repeatable results in verification and end‑of‑line checks. With a stated tolerance of ±0.001 mm, the test pin supports measurement tasks that require sub‑micron consistency; this precision reduces uncertainty in go/no‑go checks and plug‑gauge procedures. The fine tolerance is achieved through controlled grinding and finishing; for users less familiar with metrology, this level of accuracy means fewer reworks and clearer pass/fail decisions during inspection. Durable construction for routine workshop use Manufactured from special steel, the pin balances hardness and toughness to resist wear during repeated insertions and contacts. The 50 mm length provides a stable engagement depth for many alignment and verification tasks, while the small diameter of 1.90 mm suits tiny bores and pin gauges used in tooling, fixture setting and small assembly jigs. The workshop version is designed for everyday handling, combining a hardened measuring tip with a shank that resists bending under normal use, thereby extending service life. Practical handling and transport safety Delivered in a protective transport case, the pin is protected against impact and contamination in transit or on the shop bench. The case aids organised storage and reduces the risk of damage that would otherwise compromise the tight ±0.001 mm tolerance. For manufacturing environments where traceability and tool condition are essential, keeping measurement tools in a dedicated case supports quality routines and helps maintain calibration intervals. Application focus and compatibility As a purpose‑made gauge pin, this item is suited to end‑dimension checks, plug‑gauge tasks and minor alignment duties in precision engineering and small‑component manufacturing. The single‑piece format is ideal for integration into fixture checks or for use as a reference pin during assembly. Because the design is straightforward, the pin is compatible with common bench test set‑ups and inspection jigs used across mechanical workshops and small production lines. For traceable, workshop‑grade precision choose Metav IndustryLine gauge pins — order via Metav Werkzeuge and request application guidance from our Emmerich‑based specialists. Technical Data Article number: M323.190 GTIN: 4061905055355 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 1,90mm, +/- 0.001 mm Länge 50 mm SKU: M323.190 Facts Diameter: 1.90 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop version (Werkstatt‑Ausführung) Delivered in protective transport case for safe handling Material: special steel Intended for end‑measurement / end masses (endmasse) FAQ What level of precision does this gauge pin provide? The M323.190 gauge pin offers a tolerance of ±0.001 mm, making it suitable for tasks that demand sub‑micron repeatability in end‑measurements. Which materials is the pin made from and how does that affect wear? The pin is made from special steel; this material provides an optimised balance of hardness and toughness to resist wear during repeated use. Is the pin suitable for measuring very small bores? Yes — with a diameter of 1.90 mm the pin is intended for small bores and precise plug‑gauge checks commonly found in fixture and tool set‑ups. How is the item supplied for storage and transport? The gauge pin is delivered in a protective transport case to prevent damage and contamination, supporting consistent measurement performance. Can the pin be used as a reference in assembly jigs? The single, ground format makes it appropriate for reference and alignment duties in assembly and inspection jigs where a fixed diameter reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2" 13 TPI UNC Go Thread Ring Gauge ANSI/ASME B1.1 2A - Metav IndustryLine
Take advantage of hardened gauge steel, ANSI/ASME B1.1/B1.2 conformity and tolerance class 2A for fast, reproducible verification of external UNC threads; order the gauge directly via Metav Werkzeuge or consult the technical team for selection support. Go thread ring gauge UNC GO, 1/2 x 13 ANSI/ASME B1.1 – 2A (Metav IndustryLine) a Go thread ring gauge UNC GO, 1/2 x 13 ANSI/ASME B1.1 – 2A designed for quick go/no-go inspection of external UNC threads in production and incoming inspection Hardened gauge steel construction Conforms to ANSI/ASME B1.1/B1.2 Tolerance class 2A, UNC 1/2-13 Reliable thread verification for production control The Go thread ring gauge UNC GO, 1/2 x 13 ANSI/ASME B1.1 2A serves as a direct, unambiguous check for external UNC threads: a simple go/no-go outcome removes interpretation from routine inspections and speeds up throughput. As a plain-limit gauge, it provides a rapid acceptance criterion that is compliant with the referenced standard, supporting consistent quality control and reduced rework. The directness of a ring gauge helps maintain production rhythm while safeguarding assembly fit. Durable construction for repeatable measurements Manufactured from hardened gauge steel, the ring offers wear resistance and a long service life under regular workshop use. The tolerance class 2A corresponds to the established external thread limits for UNC threads, ensuring that parts passing the gauge will meet typical assembly and interchangeability demands. The compact mass (approx. 0.2 kg) and robust material keep handling straightforward while preserving the gauge geometry necessary for repeatable results across many cycles. Integration into inspection routines and supplier control Designed for practical metrology workflows, this GO ring is ideal for incoming inspection, final checks and in-process sampling where quick decision-making is essential. The item is traded as M315.954 and carries the international identifier GTIN 4054469180250, easing traceability in procurement and inventory systems. Backed by Metav’s position as a precision partner in Emmerich, the gauge complements a broader quality strategy that emphasises accessibility of accurate tools for industry and specialist trades. For reliable thread verification, request the Metav IndustryLine GO ring (M315.954) via Metav Werkzeuge—technical advisors are available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with specification and procurement. Technical data Article number: M315.954 GTIN: 4054469180250 Weight: 0.2 kg Material: Hardened gauge steel Label: Go thread ring gauge UNC GO, 1/2 x 13 ANSI B1.1 / 2A Numbers / Core technical data Size: 1/2" Thread pitch: 13 tpi Tolerance class: 2A Tariff number: 90173000 Special features / Versions Standard: ANSI/ASME B1.1/B1.2 Type: GO ring gauge for external threads Condition: good Category: Gauges / Thread gauges FAQ What does "GO" mean on a ring gauge? The GO designation indicates a limit gauge that must fit the part; for this UNC GO ring the GO condition confirms the external thread is within the allowable acceptance limits defined by ANSI/ASME B1.1. Which standard does this thread gauge follow? This ring gauge complies with ANSI/ASME B1.1/B1.2, ensuring the measurement limits and thread form meet the recognised UNC specifications for external threads. What is the meaning of tolerance class 2A? Tolerance class 2A denotes the external thread tolerance band for UNC threads under ANSI/ASME rules; parts that pass a 2A GO gauge are expected to assemble properly with corresponding internal threads. Is the gauge suitable for workshop use or only for laboratory inspection? The gauge is manufactured in hardened gauge steel and is intended for routine workshop and production inspection, offering practical durability for frequent go/no-go checks. How is the product identified for ordering and traceability? This item is listed as M315.954 with GTIN 4054469180250, facilitating straightforward ordering and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2" 20 TPI Thread Ring Gauge UNF Go, Right-Hand, Hardened Gauge Steel, ANSI/ASME B1.1 2A - Metav IndustryLine
Precise pass/fail inspection for UNF threads, achieved through a hardened gauge steel GO ring built to ANSI/ASME B1.1 standards; use this tool to reduce rework and ensure interchangeability on right-hand threads. Order the thread gauge directly via Metav Werkzeuge or consult their specialists for application advice. Thread ring gauge UNF GO, 1/2 x 20 (ANSI/ASME B1.1 / 2A) — Metav IndustryLine A Thread ring gauge UNF GO, 1/2 x 20 (ANSI/ASME B1.1 / 2A) for fast verification of right-hand UNF threads in production and quality-control environments ANSI/ASME B1.1/B1.2 compliant Hardened gauge steel construction UNF GO ring for 1/2 x 20 threads Tolerance class 2A for precision fit Consistent pass/fail checks that save production time A GO ring offers a rapid, unambiguous assessment of whether a threaded part meets the required major-diameter and pitch form limits. Fitted as a GO ring, the device confirms acceptance to 1/2 x 20 UNF specification without the need for time-consuming measurements; accepted parts can pass straight to assembly, rejected parts are identified immediately. The clear GO/NO‑GO principle reduces inspection time and lowers downstream rework rates, improving throughput in repetitive inspection tasks. Built for repeatability on the shop floor Manufactured from hardened gauge steel, this gauge resists wear and maintains geometry over extended use, which preserves measurement reliability across batches. Robust construction minimises the need for frequent replacement and supports consistent fit checks throughout production runs. The combination of a wear-resistant material and straightforward GO-design translates into dependable, low-maintenance inspection tooling for both small series and continuous manufacturing. Conforms to established standards for interchangeability Designed to the ANSI/ASME B1.1/B1.2 thread standards and specified as tolerance class 2A, the ring supports consistent acceptance criteria across suppliers and production stages. Compliance with these recognised norms ensures that parts verified with this gauge will mate reliably with corresponding internal threads made to the same standard. Traceable, standardised inspection practice simplifies supplier audits and helps uphold assembly quality across mixed-source components. Simple integration into existing quality routines The gauge’s single-purpose geometry makes it straightforward to include in production lines, inspection benches or incoming‑goods checks. The right-hand thread configuration and GO-only design keep the inspection step focused and repeatable: pass if it fits, otherwise stop and inspect. This simplicity benefits both experienced quality engineers and workshop staff, enabling quick decision-making and a clearer separation between conforming and non-conforming parts. For assured thread verification from Metav IndustryLine, request application guidance or place an order through Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.954.F Name: Thread ring gauge UNF GO, 1/2 x 20 ANSI B1.1 / 2A GTIN: 4054469180274 Nominal size: 1/2" Threads per inch: 20 Weight: 0.2 kg Tolerance class: 2A Material: gauge steel, hardened Thread direction: right-hand thread Standard: ANSI/ASME B1.1/B1.2 Type: GO ring gauge FAQ What does "GO" signify for this ring gauge? The GO designation means the ring gauge verifies that the external thread falls within the maximum material limits for acceptance; the Thread ring gauge UNF GO, 1/2 x 20 (ANSI/ASME B1.1 / 2A) accepts parts that meet the nominal tolerance for assembly. Is this gauge suitable for production inspection of fine UNF threads? Yes. The gauge is specified for 1/2 x 20 UNF threads and, as a GO ring in tolerance class 2A, is intended for rapid production‑level acceptance checks and incoming inspection. How does the material affect long-term use? Constructed from hardened gauge steel, the ring is designed for wear resistance and dimensional stability, which supports repeatable inspections over many cycles. What does tolerance class 2A mean in practice? Tolerance class 2A denotes the external thread tolerance band defined by ANSI/ASME for general commercial use; the GO ring confirms that the external thread fits within this specified band for interchangeability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2" 20 TPI UNF Go/No-Go Thread Ring Gauge Right-Hand, Hardened Gauge Steel, ANSI/ASME B1.1/B1.2 - Metav IndustryLine
Product data contains contradictory or unclear entries that prevent a reliable product description from being generated. Specifically, the thread designation lists "1/2 x 20" while the supplied thread pitch value conflicts with this (the pitch field does not match the 20 tpi designation), and pricing fields appear inconsistent (a large retail price alongside an unrelated net price). In addition, flags such as the rejection/quality marker are present but not clearly explained in context. These discrepancies affect essential technical and commercial information (thread form and pitch, conformity to standards, and saleability), so any generated specification or conformity statement could be incorrect. Please provide corrected and consistent values for the thread pitch/designation and reconcile the pricing and quality-status fields. Once the data has been clarified, a full, standards-compliant product description and technical sheet can be produced.
1/2" 20 UNF Thread Plug Gauge Right-Hand Hardened Gauge Steel ANSI B1.1/B1.2, 2B - Metav IndustryLine
Take advantage of a robust inspection tool that combines ANSI/ASME conformity, a hardened gauge steel body and a precise tolerance class 2B specification to secure reliable thread verification and fewer reworks in production. Order the gauge directly via Metav Werkzeuge or ask the consultants for application guidance. Thread plug gauge UNF 1/2 x 20 ANSI/ASME B1.1 — 2B (Metav IndustryLine) The thread plug gauge UNF 1/2 x 20 is a right‑hand verification gauge for internal UNF threads, engineered for workshop and quality‑control use in accordance with ANSI/ASME B1.1 standards Hardened gauge steel construction UNF 1/2 x 20 to ANSI/ASME B1.1 Tolerance class 2B verification Right‑hand thread Consistent acceptance testing to reduce rejects The primary advantage of this plug gauge lies in its ability to deliver reproducible acceptance results for UNF internal threads. Built to the ANSI/ASME B1.1 profile and specified as tolerance class 2B, the tool provides a clear go/no‑go criterion so that inspection stations and incoming‑goods checks run faster and with fewer disputes. Using a dedicated gauge for thread verification minimises interpretation variance in visual or dimensional checks and supports a tighter production control loop. Durable materials for long service life Manufactured from hardened gauge steel, the gauge resists wear across repeated engagement cycles, preserving the thread profile for extended usage. The solid construction sustains dimensional stability under typical workshop handling and reduces the frequency of replacement tools. For production environments where consistent mechanical fit is critical, the robust design translates into lower lifetime cost through fewer adjustments and less downtime. Simple integration into inspection workflows Designed as a compact verification device, the plug gauge eases bench checks and pass/fail stations without special fixtures. The right‑hand thread and standard UNF format permit immediate comparability with mating parts and technical drawings; this simplicity helps quality teams maintain traceability and quick decision making during batch inspections. The gauge is also lightweight and easy to store alongside other measuring instruments, streamlining the inspection process. Suited to workshop and quality departments The gauge is well suited to machine shops, assembly lines and quality laboratories that require a fast, standards‑based check for internal threads. As a straightforward, standards‑compliant tool, it supports compliance verification across supply chains and reduces uncertainty during acceptance. Maintenance teams and quality engineers gain a practical instrument that complements calipers and optical checks with definitive go/no‑go results. Contact Metav Werkzeuge today for application advice and to secure this Metav IndustryLine thread plug gauge, with dependable supply from Emmerich to your workshop. Technical data Article number: M315.924.F GTIN: 4054469179636 Name: Thread plug gauge UNF 1/2 x 20 Standard: ANSI/ASME B1.1/B1.2 Tolerance class: 2B Thread hand: Right‑hand Material: Hardened gauge steel Weight: 0.2 kg Core measurements Size: 1/2" Thread: 20 TPI Weight: 0.2 kg Tariff number: 90173000 Features and applications Verification of internal UNF threads Hardened gauge steel construction Compliance with ANSI/ASME B1.1 Category: Measuring pins; Gauges FAQ What does tolerance class 2B indicate for internal threads? Tolerance class 2B designates the standard internal thread tolerance for general engineering applications under the ANSI/ASME B1.1 system; the thread plug gauge confirms whether a component falls within that acceptance band. Can this gauge be used for incoming inspection on production parts? Yes. The plug gauge is intended for incoming‑goods and production inspection to verify that internal UNF 1/2 x 20 threads conform to the ANSI/ASME B1.1 profile and meet tolerance class 2B requirements. What material is the gauge made from and how does that affect wear? The gauge is manufactured from hardened gauge steel, which provides increased resistance to wear and maintains the thread profile over numerous inspection cycles, extending service life. Is this a right‑hand or left‑hand thread gauge? The tool is specified as a right‑hand thread gauge for standard UNF applications and is intended to check matching internal threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2" 28 TPI UNEF Thread Go/No-Go Ring NOGO, Right-Hand, Hardened Gauge Steel, ANSI/ASME B1.1/B1.2 - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and ANSI/ASME conformity to maintain reliable thread quality control; the combination of precise 2A tolerance and a 28 tpi UNEF form reduces the risk of oversized threads and downstream rework. Order the gauge directly via Metav Werkzeuge or contact our consultants for specification advice and rapid fulfilment. Gewinde-Lehrring UNEF NOGO, 1/2 x 28 ANSI B1.1 / 2A — NOGO thread ring gauge, hardened gauge steel (Metav IndustryLine) The Gewinde-Lehrring UNEF NOGO, 1/2 x 28 ANSI B1.1 / 2A is a NOGO thread ring gauge designed for quick pass/fail inspection of UNEF 1/2‑28 right‑hand threads in production and incoming inspection, compliant with ANSI/ASME standards NOGO-only control for UNEF 1/2‑28 threads Hardened gauge steel for long service life Conforms to ANSI/ASME B1.1/B1.2 standards Tolerance class 2A for industrial thread limits Rapid assurance of thread conformity for production lines A dedicated NOGO ring provides the fastest, most reliable check against oversized or out‑of‑limit threads. Manufactured from hardened gauge steel, this ring is engineered to preserve measuring edges and resist wear in a workshop environment, ensuring consistent thread inspection over many cycles. Conformity to ANSI/ASME B1.1 and B1.2 and the specified 2A tolerance class supplies a verifiable reference for limit testing, allowing process engineers to separate usable parts from rejects without time‑consuming measurements. The simple pass/fail principle supports rapid in‑line checks and reduces the throughput bottlenecks that otherwise lead to extended cycle times and additional machining. How the gauge integrates into quality workflows The ring is intended for a clear pass/fail application: the thread passes if the NOGO does not engage and fails if the NOGO screws in. Designed for routine use on the shop floor, the compact nominal size of UNEF 1/2‑28 and a mass of approximately 0.2 kg make the gauge easy to handle and store on inspection benches. The right‑hand thread construction and 28 tpi pitch match common UNEF components, simplifying operator training and standard operating procedures. Because the gauge directly enforces the maximum material condition, it prevents acceptance of oversized threads that can cause assembly issues, leaks or premature failure — a practical contribution to overall equipment efficiency. Proven standardisation and traceable identification for inspection records Compliance with recognised standards and a robust build provide confidence for auditors and quality departments alike. The gauge carries a unique SKU and GTIN for inventory and traceability, facilitating document control and procurement. Where documentation is required for internal audits, procurement or supplier contracts, the adherence to ANSI/ASME thread limits and the defined 2A tolerance class serve as objective references. Combined with Metav’s role as a precision partner, this component contributes to a predictable supply chain: reliable stock, transparent order processing and the ability to integrate the gauge into a wider inspection regime that supports consistent product quality. For assured thread conformity and specification guidance, contact Metav Werkzeuge (info@metav-werkzeuge.com, +49 2822 7131930) to request the NOGO UNEF 1/2‑28 ring and advice on integrating it into production inspection routines Technical data Article number: M315.984.EF GTIN: 4054469180908 Description: Gewinde-Lehrring UNEF NOGO, 1/2 x 28 ANSI B1.1 / 2A Material: Gauge steel, hardened Standard: ANSI/ASME B1.1/B1.2 Thread direction: Right-hand Core specifications Weight: 0.2 kg Thread pitch: 28 tpi Nominal size: 1/2" Tolerance class: 2A Tariff number: 90173000 Special features NOGO ring for UNEF thread form Hardened gauge steel construction Conforms to ANSI/ASME for thread limit gauges Right-hand thread SKU: M315.984.EF FAQ What is the purpose of a NOGO ring? A NOGO ring is used for quick verification of maximum material limits; the NOGO ring must not engage if the thread is within tolerance, and the NOGO ring will engage on oversized threads indicating rejection. The Gewinde‑Lehrring UNEF NOGO, 1/2 x 28 ANSI B1.1 / 2A fulfils this role for UNEF 1/2‑28 threads. Which standard does this thread gauge follow? The ring is manufactured to the ANSI/ASME B1.1/B1.2 thread limits and uses the 2A tolerance class specified for external threads, ensuring compatibility with US standard UNEF components. Can this gauge be used for left‑hand threads? No, this NOGO ring is designed for right‑hand threads only; its geometry and helix direction match standard right‑hand UNEF threads. How should a failed check be interpreted on the shop floor? If the NOGO ring screws in or seats fully, the thread exceeds the permitted maximum material condition and the part should be rejected or reworked according to the quality procedure; the Gewinde‑Lehrring UNEF NOGO, 1/2 x 28 ANSI B1.1 / 2A provides a clear physical limit for this decision. Is the gauge suitable for use in production and incoming inspection? Yes, the hardened construction and standard conformity make it suitable for both production in‑process checks and incoming inspection of threaded components. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2" 28 TPI UNEF Thread Ring Gauge Go Right-Hand Hardened Gauge Steel ANSI B1.1/B1.2 - Metav IndustryLine
Take advantage of a hardened gauge-steel construction combined with ANSI conformity and a 2A tolerance class to ensure dependable GO checks of external UNEF threads. Request delivery and expert advice directly via Metav Werkzeuge for seamless integration into production control. Thread ring gauge UNEF GO, 1/2 x 28 ANSI B1.1 / 2A (Metav IndustryLine) The Thread ring gauge UNEF GO, 1/2 x 28 ANSI B1.1 / 2A is a precision check gauge for fast verification of external UNEF threads in production and inspection settings Hardened gauge steel construction UNEF 1/2" x 28, ANSI B1.1 compliant Tolerance class 2A for GO verification Right-hand thread for standard fittings Consistent GO verification to reduce rejects A GO ring gauge provides a binary, fast check whether an external thread meets the maximum material condition. This ring gauge is manufactured from hardened gauge steel, which preserves the nominal diameter and thread form under repetitive use and resists wear that would otherwise erode inspection accuracy. Conformity with ANSI B1.1/B1.2 ensures that thread form and pitch are compatible with standard production threads; the specified 1/2" x 28 UNEF geometry and 2A tolerance class match the expected allowance for external threads, so acceptance or rejection follows a reproducible, standards-based rule rather than subjective judgement Easy workflow integration and traceable handling Inspection routines benefit from instruments that are simple to handle and document. The light, compact design and clear designation make the ring suitable for inline checks at turning, thread-rolling or assembly stations. Marking such as SKU M315.954.EF and the GTIN allow traceable inventory management and quality records; the gauge’s straightforward GO principle shortens cycle times and reduces operator training effort. Because the gauge is intended for verification only, it fits naturally into statistical process control loops where quick pass/fail steps feed into corrective measures Robust construction for long-term reliability Durable materials and standard-compliant thread form lower the total cost of inspection by extending service intervals and reducing spurious rework. The right-hand thread configuration aligns with common fittings, preventing misapplication, while the hardened steel body maintains thread accuracy under mechanical stress. Choosing a standards-based GO gauge supports consistent assembly outcomes and helps protect component fit and function across batches, contributing to less downtime and improved production efficiency For fast supply and technical advice on the Metav IndustryLine thread ring gauge, contact Metav Werkzeuge GmbH for order and application assistance via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M315.954.EF GTIN: 4054469180267 Description: Thread ring gauge UNEF GO, 1/2 x 28 ANSI B1.1 / 2A Size: 1/2" Material: hardened gauge steel Weight: 0.2 kg Standard: ANSI/ASME B1.1/B1.2 Tolerance class: 2A Pitch: 28 tpi Special feature: right-hand thread Facts Thread form: UNEF 1/2" x 28 Tolerance: 2A (GO) Weight: 0.2 kg GTIN: 4054469180267 SKU: M315.954.EF Special features Right-hand thread Hardened gauge-steel construction Compliance with ANSI/ASME B1.1/B1.2 Category: Gauge for external thread verification Suitable for production and inspection environments FAQ What is the primary use of this ring gauge? The ring gauge is designed for GO verification of external UNEF threads; the Thread ring gauge UNEF GO, 1/2 x 28 ANSI B1.1 / 2A (Metav IndustryLine, SKU M315.954.EF) confirms whether thread form and diameter meet the acceptance criteria Which standard does the gauge comply with? Compliance is with ANSI/ASME B1.1/B1.2, so the gauge aligns with common UN thread specifications and industrial inspection practices for UNEF threads How does tolerance class 2A affect inspection? Tolerance class 2A defines the acceptable external thread limits for the GO check; using this class ensures consistent acceptance criteria for the external thread under test What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which sustains dimensional stability and wear resistance during repetitive production inspections, preserving measurement reliability Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2" Thread Go Gauge UNC 13 TPI, ANSI/ASME B1.1 2A - Metav IndustryLine
Take advantage of a hardened gauge steel construction together with ANSI/ASME B1.1 conformity to secure repeatable thread checks and minimise production rejects; the No‑go function and 2A tolerance ensure fast go/no‑go decisions on UNC 1/2‑13 threads. Order the thread gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread Ring Gauge UNC No‑Go, 1/2‑13, ANSI B1.1 / 2A by Metav IndustryLine A precision No‑Go thread ring gauge for verifying 1/2‑13 UNC external threads to ANSI/ASME B1.1 standards, built for shop‑floor and quality‑control use Hardened gauge steel construction Conforms to ANSI/ASME B1.1 threading standard No‑go function for 1/2‑13 UNC threads Tolerance class 2A for repeatable assessment Fast, standards‑based thread verification for production control The ring is designed as a No‑Go inspection tool for UNC threads and provides a rapid binary check that supports throughput in assembly and machining processes. Manufactured from hardened gauge steel, the design resists wear and preserves the measuring profile over many cycles, which reduces the need for frequent replacement and the risk of false acceptance. Compliance with ANSI/ASME B1.1 ensures measurements are traceable to the industry reference, allowing integration into documented quality procedures and minimising ambiguity in acceptance criteria. Clear enforcement of thread tolerances to reduce rework Using a No‑Go ring with 2A tolerance offers a deterministic way to detect oversize or out‑of‑tolerance external threads before parts reach assembly. The simple pass/fail principle shortens inspection times and concentrates attention on corrective action for production feeds that exceed acceptable limits. This approach contributes directly to cost control: fewer assemblies rejected downstream, faster fault isolation and less time spent on subjective gauging. The measurable nature of the check supports statistical process control and clear non‑conformity reporting. Practical features for workshop and quality labs The gauge is configured for the common UNC size 1/2‑13, with the No‑Go function tailored to external threads. The compact, robust construction suits both the shop floor and bench inspection; the material selection and finish prioritise surface integrity of the thread profile. Lightweight handling and unambiguous use make the tool accessible to operators with varying experience, while the conformity to recognised standards supports auditability and supplier communication. For parts subject to batch testing, the ring enables quick sorting without elaborate setup or measuring fixtures. For reliable thread inspection specify Metav IndustryLine and contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich Technical data Article number: M315.984 GTIN: 4054469180892 Customs tariff: 90173000 Data Size: 1/2" Pitch: 13 threads per inch Tolerance class: 2A Weight: 0.2 kg Special features Material: hardened gauge steel Type: No‑Go ring gauge for external threads Standard: ANSI/ASME B1.1/B1.2 Category: Gauges / Thread inspection FAQ What is the gauge used for? The No‑Go ring gauge is used to check external 1/2‑13 UNC threads; the Metav IndustryLine No‑Go ring provides a fast pass/fail verdict to confirm whether threads exceed the allowable limit. Does this ring conform to recognised standards? Yes; the gauge is manufactured to meet ANSI/ASME B1.1 threading standards and is intended for use where standardised acceptance criteria are required. Which tolerance does the ring represent? The tool follows 2A tolerance for external threads, designed to detect oversize conditions in UNC 1/2‑13 threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2" x 13 UNC Thread Plug Gauge, ANSI/ASME B1.1 2B, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise, standards‑compliant gauging with a hardened gauge steel construction and tolerance class 2B for reliable verification of UNC internal threads; order directly via Metav Werkzeuge or ask our consultants for technical clarification. Thread plug gauge UNC, 1/2 x 13 ANSI B1.1 / 2B — plug gauge for internal UNC threads, hardened gauge steel, ANSI/ASME compliant (Metav IndustryLine) A Thread plug gauge UNC, 1/2 x 13 ANSI B1.1 / 2B for rapid verification of internal thread form and fit according to ANSI/ASME standards in production and inspection environments ANSI/ASME B1.1/B1.2 compliance Hardened gauge steel construction Tolerance class 2B for internal threads For UNC 1/2‑13 thread inspection Consistent conformity for production and quality control The thread plug gauge provides a fast, objective check of internal threads, giving operators and inspectors a reliable go/no‑go verdict at the point of production. Built to ANSI/ASME B1.1/B1.2, the gauge ensures conformity with widely recognised thread geometry standards, helping to reduce rework and scrap by catching deviations early. The hardened construction maintains form stability under repeated use, supporting consistent pass/fail decisions that speed up inspection cycles and support lean manufacturing routines. Robust construction that keeps measurements repeatable Manufactured from hardened gauge steel, this plug gauge resists wear and preserves the critical thread profile over long service life, which translates into lower total cost of ownership and fewer calibration cycles. The tolerance class 2B indicates the internal thread quality it verifies, making the gauge suitable for typical machine‑shop and assembly applications where reproducible internal thread fit is required. The compact, tool‑grade design supports quick handling and secure seating in threaded bores, contributing to reproducible tactile feedback during inspection. Practical integration into workshop and inspection workflows The gauge’s 1/2‑13 UNC specification and clear pass/fail function simplify its use across production lines, assembly benches and quality control stations. Its straightforward operation reduces training time for operators while its standards conformity facilitates communication with suppliers and customers about thread acceptance criteria. In combination with documented inspection procedures, the gauge supports traceable quality records and helps maintain assembly reliability where threaded joints are critical. Contact Metav Werkzeuge today for tailored advice on using Metav IndustryLine thread plug gauges in production and to request a specification sheet or stock availability — Metav Werkzeuge is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: M315.924 GTIN: 4054469179612 Category: Gauges / Thread plug gauge Label: Thread plug gauge UNC, 1/2 x 13 ANSI B1.1 / 2B Manufacturer: Metav IndustryLine Core data Size: 1/2" Threads per inch: 13 TPI Tolerance class: 2B Material: hardened gauge steel Standard: ANSI/ASME B1.1/B1.2 Weight: 0.1 kg Customs tariff number: 90173000 Special features Plug type gauge for internal threads Go/no‑go verification capability Suitable for production and inspection use Durable hardened material for extended life FAQ What is the intended use of this plug gauge? The plug gauge is designed for go/no‑go verification of internal 1/2‑13 UNC threads and confirms compliance with the specified thread form and fit. Which standards does the gauge comply with? The gauge is manufactured to ANSI/ASME B1.1/B1.2 thread geometry requirements to ensure compatibility with common UNC thread specifications. What material is the gauge made from and how does that help? Made from hardened gauge steel, the gauge resists wear and preserves thread profile accuracy during repetitive inspections. What does tolerance class 2B indicate for internal threads? Tolerance class 2B denotes the standard internal thread tolerance band for general‑purpose UNC threads, applicable in typical machine‑shop and assembly contexts. Is the gauge suitable for production use on an inspection bench? Yes, the plug gauge is intended for routine production and quality‑control use, providing rapid and repeatable go/no‑go checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com