Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
1.3mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
The combination of high repeatability, ultra‑fine ±0.001 mm tolerance and a compact 50 mm length ensures dependable end‑measurements; order the gauge pin directly via Metav Werkzeuge or contact our advisers for application support. M323.130 Gauge pin, 1.30 mm diameter, ±0.001 mm tolerance — Metav IndustryLine A M323.130 gauge pin designed for precision end‑measurements, inspection gauges and jig alignment in workshop and production settings. Workshop‑grade construction Diameter 1.30 mm, tolerance ±0.001 mm Length 50 mm for deeper features Made from special steel, hardened finish Precision where small differences decide outcomes This inspection pin delivers high precision for end‑measurement tasks thanks to its tight ±0.001 mm tolerance and nominal 1.30 mm diameter. For applications in quality control and gauge setting, this degree of accuracy reduces measurement uncertainty and rejects fewer parts at final inspection. The compact geometry supports repeatable contact conditions, which is essential when consistency across multiple measurement points is required. Robust design for everyday workshop use Manufactured in a workshop‑grade execution, the pin combines a 50 mm shank length with a surface finish that resists ordinary wear. The balanced length-to‑diameter ratio keeps the pin stable during insertion and avoids excessive bending in typical jigs and fixtures. As a result, throughput improves because fewer rechecks are necessary and fitting operations remain reliable during routine production. Streamlining inspection and tooling workflows As a single test pin for end‑measurements, this component integrates easily into existing gauge blocks, masters and fixture plates. The gauge pin format simplifies replacement and calibration tasks, reducing downtime in maintenance cycles. Where traceable repeatability is part of the inspection plan, using a dedicated pin of known tolerance minimises operator variation and shortens the time needed to validate a measurement setup. Material selection and service life considerations Made from special steel with a hardened finish, the pin is tailored for long service life under regular contact stresses in jigs and inspection tools. The choice of material supports dimensional stability and resistance to surface damage that would otherwise affect measurement reliability. For environments requiring documented calibration history, specify calibration options through Metav Werkzeuge to maintain quality records. Contact Metav Werkzeuge today to discuss Metav IndustryLine gauge pins and arrange supply or technical advice — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.130 GTIN: 4061905055652 Manufacturer: Metav IndustryLine Facts Diameter: 1.30 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Measurement range: 1.3 mm Special features Material: Special steel Workshop execution Single test pin for end‑measurements Suitable for inspection, jigging and calibration FAQ What applications is this gauge pin suitable for? The M323.130 gauge pin is suitable for end‑measurements, fixture alignment and inspection gauge setups in production and workshop environments. How tight is the tolerance and what does it mean for measurement reliability? With a tolerance of ±0.001 mm, the M323.130 provides very fine repeatability, reducing measurement uncertainty in critical end‑measurement tasks. What material is used and how does it affect durability? The pin is made from special steel with a hardened finish; this material combination improves wear resistance and maintains dimensional stability over repeated use. Can this pin be used as a replacement in existing gauge sets? Yes. The single test pin format and standard diameter make the M323.130 compatible with common gauge holders and fixture designs for easy replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.41mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
The combination of exceptional dimensional accuracy, robust special-steel construction and workshop-ready packaging ensures reliable in-process checks and repeatable go/no-go assessments; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.141 — Metav IndustryLine, diameter 1.41 mm, tolerance ±0.001 mm Gauge pin M323.141 is a single, hardened test pin for precise end-diameter checks in workshop and inspection environments Diameter 1.41 mm with ±0.001 mm tolerance 50 mm length, workshop version Special steel construction for durability Supplied individually in transport box Precise measurement for reliable production decisions This workshop-grade gauge pin delivers a tight ±0.001 mm tolerance on a 1.41 mm diameter, enabling decisive go/no-go assessments where small deviations matter. The fine tolerance reduces measurement uncertainty and supports faster acceptance or rejection of parts during batch inspections. By converting numerical accuracy into clear pass/fail results, the instrument shortens inspection cycles and lowers scrap rates, making it especially valuable in serial production and quality-control stations. Built for the workshop — toughness and handling Crafted from special steel and finished for everyday use, the pin’s 50 mm length balances reach with stiffness for repeated insertions and removals. The workshop version construction emphasises resistance to wear and deformation under typical shop handling. Supplied individually in a transport box, the item remains protected between uses and during transit, which preserves the calibrated geometry and extends service life while simplifying storage and organisation at the workbench. Practical applications and compatibility with inspection workflows As an end-measure reference, this pin is suitable for verifying drilled holes, bores and fixture openings where a precise reference diameter is required. The compact single-pin format suits manual gauges, fixture checks and bench-top inspection routines. When used alongside other plug or ring gauges, the device helps establish a clear measurement chain, improving reproducibility across operators and machines and reducing rework caused by ambiguous inspection outcomes. Confidence through traceable identification and Metav quality The part is identified as M323.141 and carries the GTIN 4061905057168 for traceability within procurement and inventory systems. Supplied under the Metav IndustryLine umbrella, the item benefits from Metav’s quality filtering and logistics from Emmerich, which supports consistent availability and dependable handling. The combination of traceable identification and robust construction promotes auditability and long-term consistency in routine inspection tasks. For workshop checks that require sub-micrometre certainty, request the Metav IndustryLine gauge pin M323.141 from Metav Werkzeuge — Metav’s specialists can advise on integration into existing inspection routines and supply matching reference sets Technical data Article number: M323.141 GTIN: 4061905057168 Material: Special steel Diameter: 1.41 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Category: Gauge pins / Messstifte Brand: Metav IndustryLine Workshop design Supplied in transport box Facts Diameter (numerical): 1.41 mm Tolerance (numerical): ±0.001 mm Length (numerical): 50 mm Weight (numerical): 0.003 kg Special features Single-piece delivery Robust finish for shop use GTIN for traceability Workshop execution designation FAQ What is the intended use of this gauge pin? The gauge pin M323.141 from Metav IndustryLine is intended for end-diameter checks, verification of drilled holes and go/no-go assessments in workshop and inspection environments. Is the diameter specification suitable for precision inspection work? Yes, the 1.41 mm diameter with a ±0.001 mm tolerance makes this pin suitable for precise dimensional checks and reliable pass/fail decisions in standard production control. How is the product supplied and protected in transit? The pin is supplied individually and protected in a transport box to preserve the measuring geometry and ensure safe handling between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.42mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Compact, workshop-grade precision with a guaranteed micro tolerance and robust stainless-feel finish: the combination of ±0.001 mm tolerance, 1.42 mm nominal diameter and a 50 mm length ensures reliable end‑measurement checks in serial inspection and setup tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.142 by Metav IndustryLine — 1.42 mm diameter, ±0.001 mm tolerance The Gauge pin M323.142 is a single test pin designed for precise end‑measurement tasks and reference fitting in workshop and inspection environments. Tolerance ±0.001 mm Diameter 1.42 mm Length 50 mm Special‑steel construction Precision where it counts for repeatable inspection results The gauge pin delivers a manufacturable micro tolerance of ±0.001 mm, which translates directly into measurable improvements in first‑off verification and in‑process spot checks. Such a fine tolerance reduces uncertainty when establishing reference fits or checking end dimensions, enabling higher confidence in pass/fail decisions. Thanks to the compact 1.42 mm diameter and the slim 50 mm shaft, the component is especially suited to small bores, dowel seats and dimensional references where space is limited but repeatability is crucial. Workshop durability and handling that supports busy production Made from special steel, this workshop‑grade pin resists wear during repeated seating and extraction, preserving the critical diameter tolerance over time. The modest mass and straight shank geometry simplify handling during assembly and inspection, while the 50 mm length provides reach for recessed features without sacrificing stiffness. Built as a single test pin for quick interchange in pin sets or fixture pockets, the component combines low handling effort with robust metrological properties to keep throughput steady. Integrating the pin into quality control workflows Traceability and procurement are straightforward: the part is available under SKU M323.142 with GTIN for order and inventory management. Use the pin as a reference in gauging fixtures, as a go/no‑go seating reference, or as a datum when setting up small assemblies; its geometry makes it compatible with standard pin guides and hardened locating bores. The compact form factor supports tight tolerances in serial production and helps reduce rework by improving the clarity of inspection tolerances at the operator level. Metav IndustryLine's catalogue position ensures consistent availability for routine replacement and set replenishment. For application guidance or to secure workshop‑grade M323.142 pins from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for fast procurement and technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.142 GTIN: 4061905057502 Manufacturer: Metav IndustryLine Facts Nominal diameter: 1.42 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg eClass: 21170231 Special features Material: special steel Workshop execution Story trigger: end measurements FAQ What is the achievable measurement tolerance with this gauge pin? The gauge pin offers a tolerance of ±0.001 mm, making it suitable for micro‑precision end‑measurements and reference seating. Is the pin suitable for use in small bore gauging and dowel checks? Yes, the 1.42 mm diameter and 50 mm length make the test pin ideal for small bore inspection, dowel seat checks and tight‑fit references. Which material is the gauge pin made from and what does that mean for wear resistance? The pin is manufactured from special steel, selected to balance hardness and resistance to wear under frequent seating and extraction in workshop conditions. How is the product identified for ordering and inventory? Order using SKU M323.142 or GTIN 4061905057502; the part is listed under Metav IndustryLine for consistent procurement. Can the pin be used as a datum in fixture set‑ups? Yes, the pin’s straight shank and precision tolerance make it suitable as a datum or reference for fixture alignment and small‑part assembly checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.43mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of the combination of micro‑tolerance accuracy, compact design and robust special steel construction for reliable reference measurements and stable fixture alignment; order the item directly via Metav Werkzeuge or request specialist advice from our consultants. Test pin M323.143 — Single gauge pin, 1.43 mm diameter, ±0.001 mm accuracy The Test pin M323.143 is a single, high-precision gauge pin intended for end-measure checking and reference probing in workshop metrology applications. ±0.001 mm tolerance for reference measurements 1.43 mm diameter for fine bore verification 50 mm length for deep-pocket access Workshop version with robust special steel construction Consistent, repeatable reference measurements The core advantage of this gauge pin is its ±0.001 mm tolerance, which delivers consistent reference values for assembly jigs, go/no-go checks and micro‑inspection tasks. With such a fine tolerance the pin serves as a reliable master for dimensional verification, reducing measurement scatter and rework. The compact diameter and calibrated length make it suitable for small bores and precision fit checks where a stable datum is required. Durable construction for everyday workshop use Manufactured from special steel, the pin combines contact durability with dimensional stability under normal workshop conditions. The 50 mm shaft provides sufficient engagement for many fixture designs while remaining manageable for handling and storage. The workshop specification ensures the part resists wear from repeated contact, maintaining the 1.43 mm reference dimension through routine use in production and quality assurance processes. Integration into inspection and tooling workflows As a single precision gauge pin, this component is straightforward to integrate into existing gaging sets, plug gauges or fixture assemblies. The small form factor supports access into tight bores and cavities, simplifying pass/fail checks and alignment operations. Used as a reference dowel in inspection sequences, the pin helps to reduce cycle time and improve throughput by providing an immediate, traceable measurement point. For precise reference measurements choose the Metav IndustryLine Test pin M323.143; contact Metav Werkzeuge in Emmerich for ordering and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.143 GTIN: 4061905057519 Brand: Metav IndustryLine Facts Diameter: 1.43 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop version Single gauge pin for end-measure applications Material: special steel FAQ What is the dimensional tolerance of this gauge pin? The Test pin M323.143 features a tolerance of ±0.001 mm, suitable for high‑precision reference measurements. Which materials is the pin made from? This item is produced from special steel, selected for contact durability and dimensional stability in workshop environments. For which applications is the gauge pin intended? The gauge pin is intended for end‑measure checks, fixture alignment and fine bore verification where a compact, high‑accuracy reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.44mm Gauge Pin, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of ±0.001 mm repeatability, a compact 1.44 mm diameter and a robust 50 mm length to streamline precision checks in production and inspection. The workshop‑grade construction and protective transport case keep the gauge pin ready for daily use. Order this gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Gauge Pin — 1.44 mm, ±0.001 mm tolerance The Metav IndustryLine gauge pin 1.44 mm is a workshop‑grade precision cylindrical gauge designed for fast end‑measurement and fit verification in inspection, assembly and toolrooms. High‑precision ±0.001 mm tolerance Diameter 1.44 mm for tight fits 50 mm overall length for handling convenience Special‑steel construction with transport case Reduce inspection time with measurable accuracy A compact cylindrical gauge that delivers ±0.001 mm nominal tolerance improves process control by limiting uncertainty at the smallest scales. As a plain‑language equivalent: the diameter variation is better than one thousandth of a millimetre, which is sufficient for most precision fits, go/no‑go checks and press‑fit verifications. Using such a high‑accuracy pin reduces the number of secondary checks and helps avoid rework, because the measurement outcome is directly comparable and repeatable under workshop conditions. Built for repeatable handling and long‑term use The pin is made from special steel and finished for workshop applications, giving a balance between wear resistance and dimensional stability. The 50 mm shaft provides enough length for secure gripping while keeping the gauge compact for toolboxes and bench use. Supplied as a workshop‑grade item, the component benefits from familiar handling characteristics: it seats easily in jigs, enters tight bores without wobble and resists distortion during routine use. Practical application and inspection advice This cylindrical gauge is primarily intended for quick verification of hole diameters, locating pins and fitted components where a nominal 1.44 mm size is required. For accurate results, measure with gentle seating and avoid lateral forces; if repeatable traceability is required, integrate the pin into a routine that logs measurement outcomes. The protective transport case included with delivery safeguards the pin from knocks and contamination between uses, preserving its dimensional integrity over time. Choose the Metav IndustryLine gauge pin for dependable micro‑inspection and contact Metav Werkzeuge for supply and tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.144 GTIN: 4061905057526 Manufacturer: Metav IndustryLine Facts Diameter: 1.44 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Workshop‑grade execution Material: Special steel Supplied in protective transport case Single item supply (individual gauge pin) FAQ What is this gauge pin used for? This gauge pin is used for end‑measurement and fit checks of small bores and locating holes; the Metav IndustryLine gauge pin 1.44 mm is suited to quick inspection tasks in workshops and assembly stations. How precise is the diameter of the pin? The nominal diameter is 1.44 mm with a tolerance of ±0.001 mm, which permits reliable go/no‑go assessments and dimensional checks at micrometre scale. What material is the pin made from and how durable is it? The pin is manufactured from special steel in a workshop‑grade finish, offering good wear resistance for regular inspection use while maintaining dimensional stability. Is the pin delivered with protective packaging? Yes—the gauge pin is supplied in a protective transport case to prevent damage during storage and transit. Which article number should be ordered? Order using SKU M323.144 (GTIN 4061905057526) to ensure the correct gauge pin is supplied. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.45mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade accuracy combined with a compact 1.45 mm diameter and a durable special steel construction for reproducible end‑measure checks. Order the pin directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Gauge pin M323.145 — single precision test pin, 1.45 mm diameter, ±0.001 mm (Metav IndustryLine) The gauge pin M323.145 is a single, high-precision test pin designed for fine end‑measure verification and fit checks in workshop inspection routines. Workshop-grade precision pin ±0.001 mm Diameter 1.45 mm, length 50 mm Made from special steel for durability Supplied in a protective transport case Reliable accuracy for critical fits The pin delivers a declared tolerance of ±0.001 mm, making it suitable where close dimensional control is essential. This level of precision supports repeatable checks of bores, plugs and mating parts in small‑feature components and helps to identify infinitesimal deviations that would otherwise affect assembly quality. The compact 1.45 mm diameter is particularly useful for narrow holes and precision gauges, providing a stable reference for go/no‑go assessments and end‑measurement tasks. The precise geometry reduces measurement uncertainty and improves consistency in routine quality control. Durable design for everyday workshop use Constructed from special steel, the pin combines wear resistance with dimensional stability under normal handling. The 50 mm nominal length offers convenient handling and reach for most small to medium test tasks while remaining easy to store and position in fixtures. As a workshop version, it withstands frequent use and is supplied in a protective transport case, which preserves the measuring surface during storage and transport. These characteristics reduce the need for frequent replacement and support a dependable inspection flow on the shop floor. Smooth integration into inspection workflows The pin is supplied as a single item with clear identification (SKU and GTIN) for traceable inventory management and straightforward procurement. Its compact form factor and clear specification simplify the selection process for calibration, fixture mounting or insertion into inspection jigs. For bespoke metrology setups or repeated comparative checks, the pin acts as a stable datum that complements calipers and micrometres in quality control stations. The straightforward specification enables rapid comparison against technical drawings and measurement logs. For precise, repeatable end‑measure verification choose the Metav IndustryLine gauge pin M323.145 — contact Metav Werkzeuge for tailored advice and procurement at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: M323.145 GTIN: 4061905054587 Manufacturer: Metav IndustryLine Description: single gauge pin, 1.45 mm, ±0.001 mm, length 50 mm Facts Diameter: 1.45 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Workshop version Supplied in a protective transport case Category: Gauge pins FAQ What tolerance does the pin offer? The declared tolerance of the gauge pin is ±0.001 mm, providing high‑precision control for fine fits. Is the pin suitable for measuring small bore diameters? Yes, the 1.45 mm diameter and stable geometry make the pin suitable for checking narrow bores and precision fit examinations. What material is the pin made from? The pin is manufactured from special steel, designed for durability and dimensional stability in workshop use. Is the pin supplied with a protective case? Yes, the item is supplied in a protective transport case to preserve the measuring surface during storage and handling. Can the pin be supplied calibrated? Calibration is not specified in the product data; for calibration options and certificates, please contact Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.46mm Test Pin ±0.001mm Length 50mm Workshop Version Plastic Case - Metav IndustryLine
Benefit from the combination of ultra-fine tolerance (±0.001 mm) and workshop-grade construction for dependable end-measure inspections. Order the gauge pin M323.146 directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.146 — 1.46 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) A gauge pin M323.146 designed for exact end-measure checks and precision locating tasks in workshop environments Ultra-fine tolerance ±0,001 mm 1.46 mm diameter, 50 mm length Workshop-grade special steel construction Supplied in a protective transport case Consistent results for tight tolerances This precision pin delivers repeatable measurement accuracy thanks to its ±0.001 mm specification. For production processes where small deviations lead to rework, the fine tolerance reduces uncertainty and supports consistent quality control. The compact geometry and stable material properties make the component suitable for series inspections and dimensional verification where reliable end-measure and plug checks are required. Durable workshop design that eases handling Manufactured in special steel and labelled as a workshop edition, the pin withstands everyday handling and the demands of a metalworking environment. The 50 mm length provides secure engagement in fixtures and test benches while the slender 1.46 mm diameter allows access to narrow bores and pockets. Supplied in a protective transport case, the item is ready for safe storage and routine use on the shop floor. Clear application logic and measurement benefit Engineered for end-measure checks, the pin acts as a precise reference probe for gauging and locating operations. Its geometry minimises bending and ensures stable contact during measurement cycles, which lowers measurement scatter and supports faster inspection throughput. Where interchangeability and traceable checks are required, this pin integrates into established inspection routines with minimal setup time. For procurement or advice on integrating Metav IndustryLine gauge pins into production workflows, contact Metav Werkzeuge for local supply and technical guidance. Technical data Article number: M323.146 GTIN: 4061905054594 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 1,46mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 1.46 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Workshop version Supplied in a protective transport case eClass: 21170231 Story trigger: end measures (endmasse) FAQ What level of accuracy does this gauge pin provide? The gauge pin M323.146 offers an accuracy of ±0.001 mm, intended for fine inspection and precise end-measure checks. Is the pin suitable for use in a production workshop? Yes, the workshop-grade construction and special steel make the pin appropriate for regular use on the shop floor. Does the item arrive ready for storage and transport? The pin is supplied in a protective transport case to facilitate safe handling and storage. Which measurements is the pin primarily used for? The pin is designed for end-measure and locating tasks, particularly for small bores, plug checks and fixture alignment. Can the pin be used as a reference in inspection fixtures? Yes, the dimensional stability and fine tolerance of this gauge pin make it suitable as a reference element in inspection fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.47mm Test Pin Single, ±0.001mm, Length 50mm, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high‑precision tolerance, workshop-grade construction and stable probing length for reliable end‑gauge and dimensional inspections. Order genuine Metav IndustryLine test pins directly via Metav Werkzeuge or consult the specialists for application advice. Test pin M323.147 — single gauge pin, 1.47 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A Test pin M323.147 designed for precise end‑gauge checks and dimensional control in workshop and inspection routines. Workshop-grade special steel construction Diameter 1.47 mm with ±0.001 mm tolerance Length 50 mm for stable probing Supplied individually for flexible use Precision that reduces measurement uncertainty The pin offers an ultra‑tight tolerance of ±0.001 mm, equivalent to 1 µm, which significantly reduces measurement uncertainty when used for end‑gauge or reference checks. Such a specification places the component in the realm of high‑precision inspection tools, suitable for fine quality control tasks where reproducibility matters. The 1.47 mm diameter is manufactured to exacting limits so that fits, clearances and calibrated plug gauges can be verified reliably. Explaining the benefit: a smaller stated tolerance means fewer rejected parts due to measurement error and a clearer signal when process adjustments are required. Workshop design for repeatable handling and durability Constructed from special steel and supplied as a single unit, this test pin combines corrosion resistance with a form factor optimised for handheld and fixture use. The 50 mm length provides a stable bearing surface during probing, which helps maintain repeatability across multiple measurements and operators. The workshop specification emphasises robustness under everyday use: components are finished to avoid burrs and ensure smooth seating in gauge holders. As a consequence, downtime for handling‑related issues is minimised and calibration intervals remain predictable. Practical integration into inspection workflows The product is intended for straightforward incorporation into existing inspection jigs, plug gauges and comparator setups; traceable inspection routines benefit from the pin’s consistent geometry. When recorded as a reference element in quality documentation, the ±0.001 mm tolerance supports tighter process capability assessments and clearer go/no‑go decisions. For shops aiming to raise inspection confidence without complex retrofits, this single test pin can serve as a compact, dependable reference in measuring benches or mobile inspection kits. For custom fixturing or batch supplies, Metav IndustryLine options and support can be consulted. Secure workshop accuracy with Metav IndustryLine precision pins — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for specification guidance and reliable supply. Technical data Article number: M323.147 GTIN: 4061905054600 Label: Prüfstift, einzeln, 1,47mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 1.47 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Workshop version Single delivery unit Application: end‑gauge and dimensional inspection FAQ What level of accuracy can be expected from this test pin? The test pin delivers an accuracy of ±0.001 mm (1 µm); this allows clear differentiation of small dimensional deviations during end‑gauge and plug‑gauge checks. Is the pin suitable for use in standard gauge holders and fixtures? Yes. The pin’s geometry and 50 mm length are compatible with common inspection jigs and comparator setups used in workshop environments. What material is used and how does it affect durability? Manufactured from special steel, the pin is designed for daily workshop use with a focus on wear resistance and stable seating, which supports repeatable measurements. Can this item be used as a reference in quality documentation? Yes. With a defined tolerance of ±0.001 mm, the component is appropriate as a reference element for documented inspection routines and process capability checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.48mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of submicrometre accuracy, robust special steel construction and a compact 50 mm length for consistent end‑dimension checks in the workshop; order the part directly from Metav Werkzeuge or contact the consultants for specification advice. M323.148 Gauge Pin (Metav IndustryLine) — 1.48 mm, ±0.001 mm The M323.148 is a workshop‑grade gauge pin designed for precise end‑dimension inspection and fixture alignment in metalworking and quality control applications. Diameter 1.48 mm with ±0.001 mm tolerance 50 mm working length for compact components Special steel, workshop execution for durability Supplied in a transport case for safe handling Reliable checks with measurable tolerance and repeatability The inspection pin offers a diameter of 1.48 mm with a tolerance of ±0.001 mm, making it suitable for demanding go/no‑go and end‑dimension verifications where repeatability is essential. The tight tolerance reduces ambiguity in acceptance criteria and helps shorten inspection cycles, which supports efficient production throughput. The compact design yields rapid handling during batch checks and fixture set‑up, enabling objective pass/fail decisions without elaborate measurement routines. Designed for workshop conditions and long service life Constructed from special steel and specified as a workshop execution, the pin resists wear under routine use and maintains dimensional stability over extended inspection runs. The moderate 50 mm length provides sufficient contact area while remaining easy to manipulate in confined assemblies or jigs. The robust finish ensures reliable seating in bores and repeatable alignment, so fewer re‑measurements are needed—contributing to lower rework rates and steadier process capability. Practical integration into inspection and assembly workflows Supplied in a protective transport case, the component is immediately ready for use at the bench or in the calibration lab and remains organised between shifts. The small mass and compact footprint make it suitable for portable inspection kits and fixture‑setting tasks. Where traceability is required, the clear labelling and the manufacturer‑grade SKU facilitate inventory control and replacement planning, supporting quality management processes without unnecessary complexity. For specification guidance, batch availability or to order the Metav IndustryLine M323.148 gauge pin with assured delivery from Emmerich, contact Metav Werkzeuge for expert assistance and fast dispatch. Technical data Article number: M323.148 GTIN: 4061905054617 Brand: Metav IndustryLine Numbers Diameter: 1.48 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Delivery: Transport case included Label: Prüfstift, einzeln, 1,48mm, +/- 0.001 mm Länge 50 mm FAQ What is the nominal diameter and tolerance of the pin? The pin has a nominal diameter of 1.48 mm and a declared tolerance of ±0.001 mm (SKU M323.148), suitable for high‑precision end‑dimension checks. Is the pin suitable for fixture alignment and go/no‑go testing? Yes, the compact 50 mm length and tight tolerance make the pin well suited to fixture alignment and rapid go/no‑go inspections in workshop environments. What material is used and how does it affect durability? The pin is manufactured from special steel in a workshop execution, which provides enhanced wear resistance and dimensional stability for routine inspection tasks. How is the product delivered and stored between uses? The gauge pin is supplied in a transport case to protect the measuring surface and to simplify storage and handling between shifts. Can the product be tracked or reordered using a unique identifier? Yes, the part is identifiable by SKU M323.148 and GTIN 4061905054617 for inventory control and straightforward reordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.49mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of workshop-grade robustness and micrometre-level accuracy for reproducible end‑measure checks; this single gauge pin combines a Ø 1.49 mm diameter with ±0.001 mm tolerance and a 50 mm length for consistent inspection results. Order directly via Metav Werkzeuge or contact the consultants for application advice and stock information. Gauge pin M323.149 — Single test pin, Ø 1.49 mm, ±0.001 mm, 50 mm A gauge pin M323.149 designed for precise end‑measure inspections and workshop checking of small components. High accuracy ±0.001 mm Compact Ø 1.49 mm diameter Robust workshop edition Delivered in transport case Precision that supports repeatable quality control The instrument's ±0.001 mm specification offers micrometre‑class repeatability, making it suitable for tight tolerance checks during final inspection or when setting up gauges and fixtures. The small Ø 1.49 mm working diameter allows access to narrow bores and fine features, while the 50 mm length provides reach without compromising stability. This combination reduces measurement uncertainty and helps maintain process control across batch runs, translating directly into fewer rejections and less rework. Durable design for the workshop environment Built as a workshop edition, the pin is manufactured from special steel for wear resistance under frequent handling. The compact mass and balanced geometry minimise bending moments during insertion, maintaining dimensional integrity over repeated cycles. Delivery in a dedicated transport case ensures safe storage and portability between inspection stations or job sites, preserving the gauge surface and supporting reliable use in everyday production routines. Practical integration into inspection workflows The single test pin is intended for end‑measure and go/no‑go checks where a clear, unambiguous result is required. Its straightforward form factor facilitates quick deployment within existing jigs and comparison sets; traceable identification (GTIN included in technical data) simplifies inventory management and quality documentation. For workshop teams seeking a low‑effort component that delivers high precision, this test pin is an efficient addition to control plans and first‑article inspections. For dependable, ready‑to‑use measuring components choose Metav IndustryLine’s gauge pin M323.149 — contact Metav Werkzeuge for availability, delivery options and specialist advice. Technical Data Article number: M323.149 GTIN: 4061905054624 Manufacturer: Metav IndustryLine Category: Gauge pins / Test pins Numeric data Diameter: 1.49 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.003 kg EClass: 21170231 Features & application Workshop edition Material: Special steel Delivered in transport case Suitable for end‑measure checks and small bores Story trigger: endmasse FAQ Is this pin supplied individually or in sets? The gauge pin is supplied as a single test pin; the product is listed as a single item under the designation M323.149 from Metav IndustryLine. Can the pin be used for bore gauging and end‑measure checks? Yes, the Ø 1.49 mm diameter and 50 mm length make the pin suitable for bore gauging and end‑measure inspections where micrometre accuracy is required. What material is used and how does it affect durability? The test pin is made from special steel, chosen for wear resistance in workshop conditions to ensure sustained dimensional reliability during frequent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.4mm Gauge Pin Length 50mm ±0.001 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm repeatability, a compact 1.40 mm diameter and a 50 mm working length for reliable end‑measurement in workshop inspections. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin, single, 1.40 mm, ±0.001 mm, length 50 mm (Metav IndustryLine) Test pin, single, 1.40 mm, ±0.001 mm, length 50 mm is a precision inspection pin designed for fine end‑measurement tasks and everyday workshop use Workshop version for robust everyday use Diameter 1.40 mm with ±0.001 mm tolerance Length 50 mm for confined inspection tasks Made from special steel for wear resistance Accuracy designed for traceable inspection results The compact inspection pin delivers a tolerance of ±0.001 mm, which translates into reproducible end‑measurements where small deviations matter. Thanks to the fine diameter and tightly controlled geometry, this precision component supports consistent compliance checks on small bores, seats and mating faces. The high level of dimensional control reduces uncertainty in quality reports and simplifies pass/fail decisions during serial inspection, making it a rational choice where measurement certainty is priority. Robust workshop configuration for daily routines Built as a workshop version, the pin balances dimensional exactness with mechanical resilience. The use of special steel increases resistance to surface wear and handling marks that commonly occur in production environments. The 50 mm length is practical for access into assemblies without sacrificing stiffness, while the compact 1.40 mm profile suits confined features and thin walls. These characteristics combine to support efficient throughput and lower rework rates in routine inspection workflows. Integration into metrology workflows and traceability As a small-format gauge element, the component integrates readily into handheld and bench inspection sequences, complementing dial test indicators, height gauges and gauge blocks. The pin's consistent geometry aids in repeatable seating and alignment during comparative checks and gauging templates. Where process documentation is required, the component provides a clear, measurable reference value that supports quality records and audit trails in production and workshop environments. For reliable workshop inspections with high repeatability, request the Metav IndustryLine test pin (M323.140) from Metav Werkzeuge — experts are available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on suitable inspection setups Technical data Article number: M323.140 GTIN: 4061905056444 Brand: Metav IndustryLine Facts Diameter: 1.40 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Configuration: workshop version Application: end‑measurement Category: test pins FAQ What is the main application of this inspection pin? The inspection pin M323.140 is intended for precise end‑measurement tasks such as checking small bores, seats and mating faces in workshop and production inspections. How tight is the dimensional tolerance of the pin? This Metav IndustryLine test pin is specified with a tolerance of ±0.001 mm, providing high repeatability for comparative gauging and critical fit checks. Which materials is the pin suitable for measuring against? The pin itself is made from special steel and functions as a reference element; contact surfaces measured are application dependent, while the pin resists common workshop wear. Can the pin be used in confined or hard‑to‑reach features? Yes, the compact 1.40 mm diameter and 50 mm length make the pin suitable for confined inspection tasks where accessibility is limited. Is this component suitable for routine workshop use? The workshop configuration and durable special steel construction make the M323.140 fitting for daily inspection routines and repeated handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5 mm Limit Gauge Pin Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Take advantage of hardened steel construction, DIN 7162 conformity and a defined good-side wear allowance for reliable go/no-go checks. Order the limit plug gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Filetta Limit Plug Gauge Pin MS911.201 — 1.5 mm, hardened steel, DIN 7162 The Filetta Limit Plug Gauge Pin MS911.201 is a precision gauge pin designed for rapid inspection of bore limits and tolerance checks in accordance with DIN 7162 Hardened steel for durable wear resistance Conforms to DIN 7162 for standardised inspection 1.5 mm diameter for fine bore verification Good-side wear allowance for reproducible results Consistent go/no-go checks that speed up inspection A limit plug gauge pin provides an immediate pass/fail result for internal diameters, eliminating time‑consuming measurement routines where a simple acceptance decision is sufficient. The MS911.201, made from hardened steel, offers stable geometry that minimises elastic deformation during insertion; this ensures that the 1.5 mm diameter remains true across repeated cycles. Conformity with DIN 7162 means the gauge pin fits established inspection protocols and simplifies documentation in quality processes, supporting faster throughput without compromising traceability. Long service life and predictable wear behaviour The design includes a defined good-side wear allowance, which protects the functional limit from premature rejection and allows planned replacement intervals. That wear allowance is documented so that measurement uncertainty remains low over the tool life, leading to fewer unexpected downtimes. The hardened material resists abrasion and preserves the calibrated gauge profile, translating into lower lifetime costs and fewer interruptions to production—an efficiency gain for shop floors and inspection benches alike. Simple integration into workshop and metrology routines These gauge pins are compact, easy to handle and suited to routine checks on small bores in assembly, machining and inspection environments. As a dedicated limit gauge, the item reduces operator decision time compared with micrometre or bore gauge measurements when an acceptance verdict is required. The compact format also facilitates storage in inspection kits and combination sets, supporting organised quality stations and quicker audit preparation. For repeatable bore inspections and standardised acceptance testing, request the Filetta limit plug gauge pin via Metav Werkzeuge’s specialists in Emmerich for tailored advice and reliable supply. Technical data Article number: MS911.201 Manufacturer: Filetta Material: hardened steel Size: 1.5 mm Standard: DIN 7162 Facts Product type: limit plug gauge pin Purpose: go/no-go bore inspection Category: gauge pins / measuring pins SKU: MS911.201 Special features Good-side wear allowance Suitable for routine inspection use Compact, single-diameter gauge pin FAQ What inspection tasks is this gauge pin suitable for? The Filetta limit plug gauge pin MS911.201 is intended for go/no-go checks of internal diameters where rapid acceptance decisions are required, for example in machining and assembly quality control. Does the gauge conform to a recognised standard? Yes, the gauge pin is manufactured to DIN 7162, ensuring compatibility with standardised inspection procedures and easier integration into documented quality systems. What material is the gauge pin made from and why does it matter? The pin is made from hardened steel, which maintains geometry under repeated use and offers good wear resistance, reducing measurement drift and extending service life. How does the good-side wear allowance affect usage? The specified wear allowance protects the functional surface used for the go decision, allowing predictable wear management and planned replacement before measurements become unreliable. Can the gauge pin be used for very small bores? With a 1.5 mm diameter, this gauge pin is intended for fine-bore verification and is suitable for small internal diameters typically encountered in precision engineering components. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1.5 mm Limit Go Gauge Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Combining hardened steel construction, conformity to DIN 7162 and a deliberate wear allowance on the go side, this limit plug gauge delivers reproducible go/no‑go checks and extended service life in routine inspection tasks. Order the gauge directly via Metav Werkzeuge or contact our consultants for application guidance. Limit plug gauge — 1.5 mm, hardened steel (Filetta) A precision limit plug gauge intended for fast go/no‑go inspection of bore tolerances in workshop and production quality control. Hardened steel construction Conforms to DIN 7162 Wear allowance on the go side Precision Ø 1.5 mm Dependable go/no‑go inspection for production The Filetta limit plug gauge is built to provide consistent go/no‑go verification, enabling quick decisions on part conformity during serial production. Manufactured from hardened steel, the mandrel maintains contact geometry under repeated use, which supports reproducible results and reduces rework. Conformity with DIN 7162 ensures the gauge fits established tolerance schemes and can be integrated into existing inspection plans. Using a dedicated gauge pin for marker checks reduces measurement time compared with micrometre setups and simplifies operator training. Designed to resist wear and maintain accuracy A defining attribute is the wear allowance on the go side, which compensates for material loss during service and preserves the functional limit for a longer interval. This design choice delays the need for replacement while keeping the no‑go boundary stable, so inspection reliability is retained across production runs. The compact Ø 1.5 mm size is suitable for small bores and tight tolerances where a stiff, well‑finished pin is required. The result is lower total cost of ownership through extended service life and fewer unscheduled gauge changes. Quick integration into metrology workflows As a standardised gauge pin, this tool fits easily into bench inspection, go/no‑go fixtures and fixture verification routines. The simple geometry makes it suitable for use in pneumatic or manual checking stations and for rapid operator checks on the shop floor. Documentation and process planning benefit from the DIN 7162 reference, enabling clear pass/fail criteria in quality records. For workshops seeking a robust, compact checking instrument, the gauge pin accelerates inspection without sacrificing traceability or repeatability. Specify Filetta limit plug gauges through Metav Werkzeuge to standardise go/no‑go testing; contact our technical advisors at Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical Data SKU: MS911.159 Brand: Filetta Article: Limit plug gauge Facts Diameter: 1.5 mm Material: Hardened steel Standard: DIN 7162 Special features Wear allowance on the go side Category: Gauge pins / limit gauges Application: Go/no‑go inspection FAQ What is the primary use of this gauge? The limit plug gauge MS911.159 (Filetta limit plug gauge) is intended for rapid go/no‑go checks of bore tolerances in production and workshop quality control. What does the wear allowance on the go side mean? The wear allowance provides a designed margin on the go face so the functional acceptance limit remains reliable over prolonged use, extending the service life of the gauge pin. Which standard does the gauge comply with? This gauge conforms to DIN 7162, which defines the geometry and tolerance relationships for plug gauges used in bore inspection. What material is the gauge made from and why? The mandrel is manufactured from hardened steel to ensure durability, stiffness and stable contact geometry under repeated inspection cycles. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1.51mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Combining workshop-grade construction, a tight tolerance of ±0.001 mm and a 50 mm engagement length, this single gauge pin ensures reliable end‑measurement and repeatable fit checks; order directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin M323.151 – 1.51 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.151 is a workshop‑grade precision test pin for end‑measurement and fit verification in inspection benches and jigs. Workshop-grade precision, ±0.001 mm accuracy Diameter 1.51 mm, ground to tight tolerance 50 mm length for consistent engagement Supplied in protective transport case Precise tolerances for confident quality control The principal advantage of this test pin is its ±0.001 mm tolerance, which translates into measurable reduction of fitting errors and rework in production. Ground from special steel, the pin delivers stable dimensional performance under repeated use, making it suitable for validating bore sizes and mating parts where tight clearances are required. For inspection processes that demand consistent pass/fail criteria, the fine tolerance offers a defensible, reproducible reference that integrates seamlessly into existing gauging routines. Geometry and handling that improve repeatability A length of 50 mm provides sufficient engagement to reduce measurement scatter while remaining compact for bench‑mounted fixtures. The 1.51 mm diameter is finished for accurate seating in pin blocks or custom fixtures, enabling repeatable positioning during end‑measurement tasks. The workshop designation reflects robust finishing and handling characteristics that resist deformation under normal use, so routine gauging yields consistent results and lower measurement uncertainty across batches. Practical integration into inspection workflows Designed as a single test pin for targeted checks, this component fits into both manual and semi‑automated inspection setups. Its compact form factor allows rapid exchange and grouping in pin sets when multi‑size verification is needed. Where traceable documentation or batch control is required, the clear marking and consistent dimensions support traceability and straightforward inventory management, assisting quality teams in maintaining compliance with internal inspection standards. Reliability from a trusted precision partner Produced for workshop use and supplied ready for transport in a protective case, this gauge pin benefits from Metav IndustryLine’s approach to accessible precision. The combination of durable material selection and exacting machining offers a cost‑effective reference tool that supports reliable assembly and verification processes. For operations seeking to standardise routine gauging without adopting complex instrumentation, this test pin is a pragmatic choice that balances accuracy and usability. For tailored advice on integrating Metav IndustryLine gauge pins into inspection setups or to secure reliable supply from Metav Werkzeuge in Emmerich, please contact our sales team via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M323.151 GTIN: 4061905054648 Label: Prüfstift, einzeln, 1,51mm, +/- 0.001 mm Länge 50 mm Weight: 0.004 kg Material: Special steel Facts Diameter: 1.51 mm Length: 50 mm Tolerance: ±0.001 mm Special features Workshop execution Single gauge pin for end‑measurement Supplied in protective transport case FAQ What is the dimensional tolerance of this test pin? The M323.151 gauge pin from Metav IndustryLine is manufactured to a tolerance of ±0.001 mm, suitable for precise fit and end‑measurement checks. Which material is used for the pin and why is it relevant? The pin is made of special steel, a choice that provides the necessary hardness and wear resistance for repeated gauging without rapid dimensional change. Can this pin be used in pin blocks or custom fixtures? Yes; the 1.51 mm diameter and ground finish make the pin compatible with standard pin blocks and bespoke fixture designs intended for bore and fit verification. Is the M323.151 suitable for routine production inspection? Its workshop execution and 50 mm engagement length make the pin well suited for routine inspection tasks where repeatability and compact handling are priorities. How should the pin be stored to preserve accuracy? Store in its protective transport case and avoid corrosive environments; periodic visual checks and cleaning with a lint‑free cloth maintain reliable performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.52mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
The combination of micrometre-level accuracy (±0.001 mm), a 1.52 mm diameter and a 50 mm length delivers repeatable end‑dimension checks and robust handling in workshop environments; order directly via Metav Werkzeuge or request advice from our consultants for integration into inspection routines. Gauge pin M323.152 — 1.52 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) A Gauge pin M323.152 designed for precise end‑dimension checks and routine workshop inspection tasks, supplied as a single test pin in a protective transport case. Workshop-grade construction Diameter 1.52 mm with ±0.001 mm tolerance 50 mm overall length for stable handling Supplied in protective transport case Repeatable micro‑diameter control for critical fits The 1.52 mm diameter combined with a tolerance of ±0.001 mm (one micron) provides a level of precision typically required for tight fits and critical end‑measurements in production and QA contexts. This level of accuracy reduces uncertainty in pass/fail assessments and supports consistent assembly processes. The dimensional stability of the pin makes it a reliable reference for short‑range verification tasks where sub‑micrometre deviations can affect part function. Robust design that suits everyday workshop demands Built as a workshop‑grade component from special steel, the test pin balances hardness and toughness to withstand frequent seating, insertion and removal cycles. The 50 mm overall length offers convenient handling and helps ensure secure seating in gauges or fixtures, improving repeatability during batch checks. The construction supports sustained use without rapid wear, contributing to predictable maintenance intervals and fewer measurement interruptions. Streamlined inspection workflows and fixture compatibility As a single test pin, the component integrates easily into gauge sets, plug gauges and inspection benches used for end‑dimension assessments. The compact 50 mm form factor and consistent diameter simplify positioning in fixtures and reduce setup time, enabling faster throughput in routine quality control. The included protective transport case preserves the pin’s condition during storage and transit, maintaining measurement integrity across shifts. Trusted sourcing and pragmatic supply for production environments Supplied under the Metav IndustryLine, the pin benefits from a supplier network that emphasises consistent quality and dependable fulfilment from Emmerich. The product aligns with Metav’s goal of making high‑precision tools accessible for workshops and industry alike, backed by a broad product range and established logistics. This reliability supports stable inspection capacity and reduces the risk of downtime due to missing reference components. For workshop teams requiring dependable micro‑gauge control, contact Metav Werkzeuge to source the Metav IndustryLine gauge pin M323.152 and arrange delivery from our Emmerich facility — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M323.152 GTIN: 4061905054655 Manufacturer: Metav IndustryLine Facts Diameter: 1.52 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop‑grade execution Material: Special steel Single test pin, supplied in protective transport case Category: Gauge pins FAQ What tolerance does this gauge pin provide? The gauge pin M323.152 provides a tolerance of ±0.001 mm, suitable for micrometre‑level end‑dimension checks. Which applications is the pin best suited for? Ideal for end‑dimension verifications, plug‑gauge checks and short‑range fit tests in workshop and production inspection routines. What material is used for the pin? The test pin is manufactured from special steel, chosen for wear resistance and dimensional stability under routine use. Is the pin delivered ready for storage and transport? The M323.152 is supplied as a single test pin in a protective transport case to preserve condition during storage and transit; no specific calibration certificate is listed in the product data. How does the 50 mm length affect handling and fixture use? The 50 mm overall length improves handling and seating stability in fixtures, aiding repeatable placement and faster routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.53mm Test Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop-ready robustness and micrometre-level accuracy to secure reliable end‑measurement results. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for integration into inspection routines. M323.153 gauge pin — Gauge Pin 1.53 mm, ±0.001 mm (Metav IndustryLine) M323.153 is a single gauge pin designed for precise end‑measurement and inspection tasks in workshop environments Precision diameter 1.53 mm ±0.001 mm accuracy 50 mm hardened length for repeatable seating Made from special steel, workshop-grade finish Supplied in protective transport box Precision where measurement tolerance matters The M323.153 gauge pin provides micrometre-level control thanks to its declared ±0.001 mm tolerance. Such fine accuracy makes this inspection pin suitable for high‑precision end‑measurements, checking bore sizes and verifying small assembly fits where a tight tolerance band is required. The specified diameter of 1.53 mm is produced and checked to ensure consistent contact geometry; this reduces measurement uncertainty caused by pin deformation or variable seating. In practical terms, the tight tolerance shortens verification time by minimising rework and doubt during quality checks, supporting efficient and documented inspection procedures. Built for repeatability in active workshop use With a hardened length of 50 mm, the pin offers reliable engagement depth while remaining easy to handle on the shop floor. The component is manufactured from special steel and finished as a workshop‑grade item, giving a balance of wear resistance and economical service life in routine inspection tasks. Supplied individually and protected in a transport box, the pin arrives ready for immediate use and safe storage during transit. These delivery and build features support repeatable seating and consistent contact points, which are critical when pins are used as reference end‑measures in fixtures or during incoming inspection. Practical applications and easy integration This inspection pin is designed primarily for end measurement tasks: assessing bore diameters, validating jig seating and setting up precision fixturing. As a single‑piece gauge, it complements go/no‑go sets and can be used alongside calipers and micrometres to cross‑check results and establish traceable references. The simple geometry reduces the need for complex handling procedures, and the compact format suits bench checks and assembly verification. For workshops seeking a pragmatic, high‑accuracy pin, the component simplifies process control and feeds reliable dimensional data into quality records. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for personalised advice and order assistance — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.153 GTIN: 4061905054662 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 1,53mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 1.53 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Version: Workshop execution Delivery: Single item in transport box Intended use: End measurement / inspection FAQ What is the declared tolerance for this gauge pin? The declared tolerance for the M323.153 gauge pin is ±0.001 mm, ensuring micrometre‑level repeatability for end measurements. Can the gauge pin be used for bore inspection and fixture set‑up? Yes. The inspection pin from Metav IndustryLine is suitable for bore checks, fixture seating and quick verification tasks on the shop floor. How is the M323.153 delivered and stored? The gauge pin is supplied as a single item and comes protected in a transport box to prevent damage during shipment and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.54mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of a reproducible reference with ±0.001 mm accuracy and a compact 1.54 mm nominal diameter in a 50 mm length for reliable alignment and inspection tasks; combine precision, workshop robustness and straightforward procurement — order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.154 — single gauge pin, 1.54 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The Gauge pin M323.154 is a single high-precision inspection and alignment pin designed for tight-tolerance checks and fixture referencing in precision engineering and toolmaking. High precision ±0.001 mm tolerance 1.54 mm nominal diameter for tight fits 50 mm special-steel length for secure seating Workshop-grade finish for repeated use Reproducible accuracy for inspection and alignment A compact gauge pin with ±0.001 mm tolerance (±1 µm) provides a stable reference for pass/fail checks, fixture alignment and micro-assembly control. The extremely narrow allowance means that positional variance is reduced when used as a plug or locating element in inspection jigs; this supports a consistent quality flow and fewer downstream adjustments. Such dimensional certainty is particularly valuable where cumulative tolerances determine final acceptance. Durable material and workshop-grade execution Manufactured from special steel, the pin is specified at 50 mm overall length and finished for workshop use, which balances wear resistance with handling convenience. The combination of material choice and workshop execution reduces surface degradation in repeated seating operations, extending service life in everyday metrology tasks. This makes the item suitable as a durable reference in production test rigs or as a reliable datum when setting up small-batch fixtures. Micro-category precision for fine components With a nominal size of 1.54 mm, the product falls into the micro measurement category — compact items intended for fine-mechanical and small-part work. Such a designation indicates suitability for micro parts, delicate assemblies and toolmaking applications where short overall length improves stiffness and reduces bending-related error. The single-pin format simplifies insertion and removal during sequential checks while maintaining the pinpoint accuracy expected in high-precision shops. For workshop-ready precision and technical advice based on Metav IndustryLine standards, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange procurement or discuss integration into existing inspection fixtures. Technical data SKU: M323.154 GTIN: 4061905054679 Manufacturer: Metav IndustryLine Facts Nominal diameter: 1.54 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.004 kg Special features Material: special steel Workshop version Single gauge pin ECLASS: 21170231 FAQ What level of accuracy does the gauge pin provide? The gauge pin M323.154 delivers an accuracy of ±0.001 mm (±1 µm), making it suitable for very fine tolerance checks in precision engineering. For which applications is this pin intended? This Metav IndustryLine gauge pin is intended for inspection, fixture alignment and micro-assembly tasks where compact, repeatable reference points are required. Is the pin suitable for repeated seating in production jigs? Yes; the workshop-grade execution and special-steel construction of the M323.154 are designed for repeated use in production and inspection environments. How does the 50 mm length affect measurement stability? A 50 mm length provides a balance between reach and stiffness; it permits secure seating in fixtures while limiting bending, which supports repeatable outcomes for small-component checks. Does the pin come as a single item or in sets? The product is supplied as a single gauge pin under SKU M323.154; set availability is not indicated in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.55mm Test Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of ±0.001 mm repeatability together with a compact 1.55 mm diameter and 50 mm reach for reliable end‑measure checks and probe calibration in workshop inspection routines. Order the M323.155 gauge pin directly via Metav Werkzeuge or consult our specialists for process integration. M323.155 gauge pin — 1.55 mm diameter, ±0.001 mm workshop grade (Metav IndustryLine) A M323.155 gauge pin designed for high‑precision end‑measure verification and tight‑tolerance probing in workshop and inspection fixtures. ±0.001 mm tolerance for fine measurement control 1.55 mm diameter for small‑bore and probe tasks 50 mm length for deeper access in assemblies Workshop‑grade special steel construction Precision that supports clear go/no‑go decisions The compact design delivers a defined contact surface with a ±0.001 mm tolerance, making the gauge pin suitable for high‑resolution verification during in‑process checks and fixture set‑up. The controlled diameter of 1.55 mm minimises play in small bores and test jigs, while the 50 mm length allows access to recessed features. Such dimensional certainty reduces cycle‑time wasted on ambiguous results and supports consistent pass/fail decisions in routine quality control. Built for robust workshop handling and repeatability Manufactured in workshop‑grade special steel, the pin resists wear from repeated seating and contact against hardened test surfaces. The single‑piece design ensures minimal deformation under normal probe pressures, so measurement drift between cycles is reduced. Where repeatable tactile probing and end‑measure assessment are required, the mechanical stability of this gauge pin improves process reliability and lowers rework rates. Material choice and maintenance explained The selected special steel balances hardness and toughness to extend service life without becoming brittle. Regular inspection and light lubrication of contact areas preserve surface integrity; if optical inspection or calibration routines are in place, the pin’s consistent geometry supports traceable checks. For calibration and documentation purposes, the compact geometry simplifies handling and makes the pin suitable for integration into existing inspection protocols and probe qualification sequences. Practical applications and compatibility with inspection equipment This gauge pin is ideal for small‑bore gauging, probe tip verification, fixture alignment and end‑measure checks in machining and assembly environments. The form factor suits manual and automated probing systems as well as comparator fixtures where precise reference diameters are required. The combination of 1.55 mm diameter and tight tolerance supports use in precision mechanical workshops, toolrooms and metrology benches where small‑feature control matters most. For workshop calibration and fixture planning, contact Metav Werkzeuge in Emmerich to request technical details or to discuss the M323.155 gauge pin for specific inspection tasks Technical data Article number: M323.155 GTIN: 4061905054686 Category: Gauge pin (test pin) Facts Diameter: 1.55 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Version: Workshop execution Single‑piece gauge pin for end‑measure checks FAQ What is the intended use of this gauge pin? The M323.155 gauge pin is intended for small‑bore gauging, probe verification and end‑measure checks in workshop inspection setups. How precise is the M323.155 gauge pin? This Metav IndustryLine gauge pin is specified to ±0.001 mm, providing high repeatability for fine measurement control. Which materials is the pin compatible with during inspection? The M323.155 is a reference artefact and is used to verify measurement systems; it is made from special steel and is compatible with standard probe and fixture interfaces. Can the pin be used in automated probing systems? Yes, the compact 1.55 mm diameter and 50 mm length make the pin suitable for integration into manual and automated probing and fixture systems. Is the M323.155 supplied as a single unit or in sets? The listed item is supplied as a single gauge pin; consult Metav Werkzeuge for set configurations or matched sizes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.56mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
High-precision end‑measure control is achieved by combining ±0.001 mm accuracy with a slim 1.56 mm diameter and a 50 mm effective length, providing reproducible fit checks and inspection readings; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.156 gauge pin — Ø 1.56 mm, ±0.001 mm, 50 mm The M323.156 is a workshop-grade gauge pin for precision end‑measure checks and fit control in inspection, jig setting and tool alignment. Workshop-grade special-steel construction High precision: ±0.001 mm accuracy Supplied in a protective transport case Accurate end‑measure checks with industrial precision The compact pin delivers exceptionally tight tolerances, specified at ±0.001 mm, which supports repeatable dimensional control where minimal clearance or interference fits are critical. The combination of a 1.56 mm diameter and a 50 mm length keeps bending effects low while offering sufficient engagement for reliable readings. Where process stability and traceable measurements matter, this measuring pin reduces rework and shortens inspection cycles by making tolerance checks straightforward and verifiable. Engineered for workshop use and simple handling Built as a workshop‑grade tool from special steel, the pin balances hardness with corrosion resistance to withstand regular use in a production environment. The lightweight, compact design eases manual handling and fast positioning in small bores or jigs; the included protective case simplifies transport between bench and machine. For operators, this means quicker setup times and less handling-induced variation compared with bulkier measuring items. Ideal for fine mechanical tasks and fit verification Classified within the micro‑range, the pin is tailored to fine mechanical and precision‑engineering applications such as gauge setting, end‑measurement verification and fit testing of small diameters. It functions as a direct reference for pass/fail checks and as a master gauge in inspection routines, supporting consistent quality control at the component level and integration into established measuring procedures. Check availability and specify technical requirements with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and delivery options Technical data SKU: M323.156 GTIN: 4061905054693 Category: Gauge pins (pin gauges) Facts Diameter: 1.56 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Workshop-grade configuration Supplied in a protective transport case Intended use: End-measure and fit control FAQ What tolerance does the M323.156 gauge pin offer? The M323.156 gauge pin is specified to ±0.001 mm, enabling very fine tolerance checks for small-diameter fits. Which material is used for this measuring pin? This measuring pin is made from special steel, selected for its wear resistance and dimensional stability in workshop conditions. Is the pin supplied with any protection for transport? Yes, the M323.156 is supplied in a protective transport case to prevent damage during storage and movement. For which measurement range is this pin intended? The pin is a micro‑range measuring tool, designed for precision work around the 1.56 mm diameter class, ideal for fine mechanical and inspection tasks. Can the gauge pin be used for jig setting and inspection masters? Yes, the M323.156 is suitable as a master reference in jig setting and as a go/no‑go reference for small-bore inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.57mm Test Pin Length 50mm ±0.001mm Workshop Version in Case - Metav IndustryLine
Take advantage of the combination of exact repeatability, compact dimensions and workshop‑hardened construction for reliable end‑measurement tasks; order the M323.157 test pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.157 test pin — precision gauge pin (1.57 mm, ±0.001 mm) by Metav IndustryLine The M323.157 test pin is a workshop‑grade gauge pin designed for precise end‑measurements and fitting checks in small‑part inspection and toolmaking. Precision tolerance ±0.001 mm Diameter 1.57 mm ground to size Length 50 mm workshop grade Special steel for wear resistance Ensure repeatable fits with sub‑micrometre control A tolerance of ±0.001 mm makes this pin suitable where tight clearances determine part acceptance. The nominal diameter of 1.57 mm is produced to gauge standards so that mating bores and plug gauges can be verified reliably; this reduces scrap and rework by providing a consistent, objectively measurable reference. The compact form is particularly advantageous for end‑measurement and assembly checks where space is limited and repeatability is essential. Durable workshop construction for frequent handling Built as a workshop grade instrument from special steel, the pin tolerates regular handling and inspection routines without rapid wear. The 50 mm active length offers a practical balance between reach and rigidity for small components and fixtures. Where multiple insertions are required during production runs, the robust material and precision finish maintain dimensional stability, extending service intervals and preserving measurement integrity. Easy procurement and straightforward kit integration Traceability is supported by the clear identifier M323.157 and the product GTIN, simplifying stock management and reordering. The pin integrates directly into existing pin trays, gauge sets and inspection fixtures, enabling efficient calibration workflows and reduced setup time. As an element of a calibrated inspection routine, the component provides a concise reference point that streamlines go/no‑go decisions and supports consistent quality control. For procurement, stock enquiries or compatibility guidance on the M323.157 test pin, contact Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com, +49 2822 7131930) for personalised technical support and delivery options. Technical data Article number: M323.157 GTIN: 4061905054709 Manufacturer: Metav IndustryLine Material: Special steel Special version: Workshop execution Numbers / Core technical data Diameter: 1.57 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg Designs / Special features Single test pin Workshop grade Ground to gauge dimension Intended for end‑measurement tasks FAQ What tolerance does the test pin offer? The M323.157 test pin is specified with a tolerance of ±0.001 mm, suitable for high‑precision go/no‑go and fit checks. Which material is the pin made from? The pin is manufactured from special steel and supplied in a workshop‑grade finish to resist wear during repeated use. Is the pin suitable for small‑bore inspection and assembly checks? Yes, the 1.57 mm diameter and 50 mm length make the pin appropriate for small‑bore verification and component assembly control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.58mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine sub‑micrometre accuracy, workshop‑grade construction and compact handling for consistent end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 1.58 mm – ±0.001 mm accuracy, 50 mm length (Metav IndustryLine) A gauge pin, single, 1.58 mm, designed for precise end‑dimension inspection and robust workshop measurement tasks. ±0.001 mm dimensional accuracy Workshop‑grade special steel construction Supplied in protective transport case Accurate measurement for reliable end‑dimension checks The combination of ±0.001 mm tolerance and a slender 1.58 mm diameter makes this pin ideal where tight end‑dimension control matters. As a hardened inspection pin it provides a measurable, repeatable reference for go/no‑go testing, pin gauges and ending measurements in small‑part production. The described tolerance means deviations are kept within one micrometre, giving a clear rational advantage for quality assurance and process stability. Robust design tailored to workshop conditions Built as a workshop version from special steel, the component balances hardness and wear resistance to withstand frequent insertion cycles. The compact 50 mm length maintains rigidity while remaining easy to handle, and the small mass supports quick positioning without disturbing delicate assemblies. This construction reduces downtime for replacements and supports continuous, efficient inspection routines in the workshop environment. Practical handling and traceable logistics At just 4 g, the pin is lightweight and simple to integrate into existing gauge sets or fixtures. Delivery in a protective transport case preserves the measuring face during storage and transit, cutting the risk of accidental damage that would affect measurement certainty. The concise form factor eases manual handling and minimises the impact on measuring jigs where space is limited. Typical applications and compatibility Engineered for end‑dimension measurement, the pin is suitable for verification of drilled holes, alignment checks and small‑component control in precision engineering and toolmaking. Its workshop rating and material choice make it compatible with regular inspection workflows and pin‑based measurement systems, providing a dependable reference for repeatable checks and process documentation. Contact Metav Werkzeuge for delivery options, technical matching and supply of the M323.158 gauge pin for workshop measurement tasks Technical data Article number: M323.158 GTIN: 4061905054716 Material: Special steel Length: 50 mm Diameter: 1.58 mm Tolerance: ±0.001 mm Weight: 0.004 kg Facts Length: 50 mm Diameter: 1.58 mm Tolerance: ±0.001 mm Weight: 0.004 kg Special features Workshop version Supplied in protective transport case Intended for end‑dimension checks Category: Gauge pin FAQ What is the dimensional tolerance of this gauge pin? The gauge pin M323.158 from Metav IndustryLine is manufactured to a tolerance of ±0.001 mm for high‑precision inspection work. Which material is used for the pin and is it suitable for regular workshop use? This Metav IndustryLine gauge pin is made from special steel and is specified as a workshop‑grade version, making it suitable for frequent use in production inspection. How long is the pin and how does that influence handling? The inspection pin measures 50 mm in length; this compact dimension keeps the pin rigid and easy to handle in confined measuring setups. Is the product supplied with protective packaging? Yes, the M323.158 gauge pin is supplied in a protective transport case to preserve measurement faces during storage and transport. For which inspection tasks is this pin typically used? The pin is intended for end‑dimension and hole‑verification tasks, including go/no‑go checks and alignment inspections in precision engineering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.59mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micron repeatability, compact form factor and industrial special steel for dependable end‑measurements and repeatable inspection flows. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.159 Gauge pin — 1.59 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The M323.159 is a single gauge pin engineered for precision end‑measurements and inspection tasks in workshop and metrology environments. High-precision tolerance ±0.001 mm Nominal diameter 1.59 mm Length 50 mm for stable probing Hardened special steel construction Workshop-grade single gauge pin Reliable dimensional control with sub‑micron tolerance A compact precision pin with a confirmed tolerance of ±0.001 mm provides a clear rational advantage where tight fits and small clearances are critical. The numeric specification translates into reduced rework and fewer measurement-related stoppages because the pin delivers consistent reference points for gauges, fixtures and manual checks. Where repeatability matters, the 1.59 mm nominal diameter and tight tolerance allow precise verification of bores, pins and mating features without the ambiguity that looser gauges can introduce. Space-saving probe for fine mechanics and inspection benches The short 50 mm length balances handling stability with the compactness needed on crowded inspection benches or in fine‑mechanical assembly jigs. This design reduces bending moment during probing, improving positional stability and measurement reliability compared with longer probes used in ad‑hoc checks. The small footprint also makes the component suitable for nested fixture layouts and micro‑assembly stations where every millimetre of clearance matters. Durable material and workshop‑ready handling Manufactured from special steel and finished for workshop use, the pin withstands repeated seating and withdrawal in inspection routines. The material choice enhances wear resistance, keeping the diameter consistent over many cycles and extending the service interval before replacement is necessary. As a single gauge element, it is straightforward to integrate into existing plug gauges, verification fixtures or manual inspection sequences, providing a durable datum that supports efficient quality control. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine gauge pin into inspection fixtures; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.159 GTIN: 4061905054723 Description: Gauge pin, single, 1.59 mm, ±0.001 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 1.59 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.004 kg eClass: 21170231 Special features Material: Special steel Version: Workshop execution Single-piece gauge pin Intended use: End measurements and inspection tasks FAQ What level of accuracy can be expected from this gauge pin? The M323.159 gauge pin delivers a stated tolerance of ±0.001 mm, making it suitable for high‑precision verification and tight‑fit assessments in inspection workflows. Is the pin suitable for use in small‑bore verification fixtures? Yes; with a nominal diameter of 1.59 mm and compact length, this single gauge pin is intended for small‑bore checks and can be mounted in verification fixtures or plug gauges. How does the material affect long‑term measurement stability? Constructed from special steel, the pin resists wear and maintains diameter integrity over many cycles, supporting stable reference measurements in workshop environments. Can the gauge pin be integrated into existing manual inspection rigs? The single‑piece design of the M323.159 allows straightforward integration into manual rigs, plug gauges and jigs where a precise datum or end‑stop is required. What inspection tasks is this product optimised for? This workshop‑grade gauge pin is optimised for end‑measurements, go/no‑go checks and positional verification of small mechanical components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the high measurement precision (±0.001 mm) combined with a compact 1.50 mm diameter and a 50 mm overall length for reliable end‑dimension checks; the workshop‑grade design and transport case protect the pin in daily use. Order the inspection pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.150 – 1.50 mm diameter, ±0.001 mm accuracy The Test pin M323.150 is a single precision inspection pin designed for end‑dimension checks and gauging tasks in workshop metrology. Precision tolerance ±0.001 mm 1.50 mm diameter, special steel 50 mm length for end‑dimension checks Workshop version supplied in transport case Consistent results through defined accuracy A tolerance of ±0.001 mm provides a measurable advantage where repeatability matters: production checks remain comparable shift to shift, and sampling routines catch deviations early. The fine tolerance reduces uncertainty in pass/fail decisions and supports inline quality control, so fewer components require rework. By specifying a narrow error band, testing routines become a reliable part of process control rather than a source of doubt. Durable materials and workshop readiness Manufactured from special steel and offered as a workshop version, the inspection pin is built to withstand frequent handling without rapid wear. The 50 mm overall length gives secure engagement in fixture plates and gauge blocks while keeping the probe compact for tight assemblies. Supplied in a protective transport case, the pin arrives ready for storage or immediate deployment on the shop floor, minimising the risk of damage during transit and maintaining the defined geometry that underpins measurement confidence. Practical applications and integration into workflows The inspection pin is ideal for end‑dimension verification, fixture alignment and repeatable gauging operations in metalworking and precision assembly. Its compact 1.50 mm diameter permits access into narrow bores and fine features, making it suitable for both prototyping and production checks. When paired with stable fixturing and calibrated reference standards, the pin supports fast go/no‑go assessments and simplifies integration into existing inspection jigs. Metav’s focus on accessible precision ensures that this pin complements a broader toolkit for effective quality assurance. For production‑critical gauging, choose the Metav IndustryLine M323.150 inspection pin for its proven accuracy and robust workshop design; contact Metav Werkzeuge in Emmerich to confirm stock and logistical details. Technical data Article number: M323.150 GTIN: 4061905054631 Label: Test pin, single, 1.50 mm, ±0.001 mm, length 50 mm Core figures Diameter: 1.50 mm Measuring range: 1.5 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.004 kg Special features Material: Special steel Workshop version Packaging: transport case Eclass: 21170231 Category: Measuring pins FAQ What tolerance does the inspection pin offer? The M323.150 inspection pin is manufactured to a tolerance of ±0.001 mm, suitable for high‑precision end‑dimension checks. Which materials is the pin suitable for? The M323.150 is made from special steel and is intended for mechanical gauging tasks; compatibility with specific workpiece materials depends on the intended measurement setup and mating components. Is the pin delivered ready for workshop use? Yes, the item is supplied as a workshop version and delivered in a protective transport case to reduce handling damage and keep the pin geometry intact. Can the pin be used for fixture alignment and gauging? The slim 1.50 mm diameter and 50 mm length make the pin appropriate for fixture alignment, go/no‑go checks and repeatable gauging in production environments. How should the inspection pin be maintained? Keep the pin clean and dry, protect from mechanical shock, and store it in its case when not in use; periodic inspection for wear will help maintain measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5–3.0mm Nozzle Gauge Set 16 Pieces Steel Pins ±0.005mm Accuracy - Metav IndustryLine
Take advantage of a compact, workshop-ready gauge set that combines fine incremental sizes (1.5–3.0 mm) with a verified accuracy of 0.005 mm, ensuring reliable nozzle checks and repeatable inspection results; order the set directly via Metav Werkzeuge or contact a consultant for application advice. Nozzle Gauge Set M318.024 — 16-piece, 1.5–3.0 mm, 0.005 mm accuracy (Metav IndustryLine) The Nozzle Gauge Set M318.024 is a precision inspection tool for checking small-diameter bores and orifices in production, maintenance and incoming‑goods control 16 gauges covering 1.5–3.0 mm Accuracy 0.005 mm for reliable verification Compact set, suitable for workshop inspection Precision for tight tolerances The gauge set was conceived for inspections where repeatability matters. With an accuracy of 0.005 mm, the set enables controlled verification of small bores and nozzle diameters without resorting to time‑consuming measuring instruments. The finely graded range of 1.5–3.0 mm in 0.1 mm steps provides a clear pass/fail decision for production control and sorting; this reduces rework and speeds up quality checks by turning a measurement task into a rapid verification process. Designed for routine workshop use A practical inspection kit must be easy to handle and integrate into daily workflows. The compact composition of the set keeps handling simple while maintaining measuring integrity during repeated checks. Each gauge functions as a tactile reference for go/no‑go testing, making the set suitable for use at machine benches, assembly stations and quality posts. The lightweight design supports frequent use without operator fatigue, increasing throughput during inspection routines. Clear benefits for procurement and quality teams For purchasing and quality assurance, the set offers a focused solution: predictable inspection criteria, straightforward inventory of sizes and immediate applicability across small‑diameter components. The set supports standardised inspection procedures and documentation, allowing quality teams to enforce consistent acceptance limits. Where quick decisions are required on nozzle conformity, this gauge set provides an efficient, low‑complexity method to protect process quality. For precise small‑diameter verification and advice tailored to specific applications, contact Metav Werkzeuge – Metav IndustryLine consultants can advise on using the Nozzle Gauge Set M318.024 and its suitability for inspection tasks; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M318.024 GTIN: 4054469127736 Tariff code: 90173000 Measurements Measuring range: 1.5–3.0 mm Step sizes: 0.1 mm Accuracy: 0.005 mm Weight: 0.04 kg Set contents and classification Set composition: 16 gauges Suitability: nozzle diameter verification, inspection gauges Packaging: supplied as a set FAQ What sizes are included in the set? The set contains gauges spanning 1.5–3.0 mm in 0.1 mm increments for systematic small‑diameter checks. How accurate are the gauges? The gauges provide an accuracy of 0.005 mm, enabling reliable go/no‑go verification for fine tolerances. Is the set suitable for workshop and production use? Yes, the Nozzle Gauge Set M318.024 is designed for workshop inspection and routine production checks where quick, repeatable decisions are required. How should the gauges be used for inspection? Use each gauge as a tactile reference for pass/fail testing of nozzle or bore diameters; the discrete steps simplify acceptance sampling and sorting. Does the set come ready to use? The set is supplied complete with 16 gauges and is ready for immediate integration into inspection routines. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com