Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M115x1.5 Thread Go Plug Right-Hand For Metric ISO Fine Threads With Calibration Certificate, DIN 13 6H - Metav IndustryLine
Precise thread verification coupled with hardened gauging steel and an included calibration certificate provides reliable, repeatable acceptance checks for fine metric threads — order the plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M115 x 1.5 — Go gauge, DIN 13 (6H) by Metav IndustryLine The thread plug gauge GUT M115 x 1.5 is a right‑hand Go gauge designed for rapid verification of metric ISO fine threads in production, inspection and quality control settings Gauge for M115 × 1.5 fine thread Hardened gauging steel construction Delivered with calibration certificate Conforms to DIN 13, tolerance 6H Ensure correct threads at first inspection A dedicated Go gauge accelerates pass/fail checks and reduces downstream rework by confirming that internal threads meet the specified envelope. The M115 x 1.5 nominal and 1.5 mm pitch are checked directly by the control mandrel, eliminating guesswork during sampling. Constructed from hardened gauging steel, the mandrel resists wear and preserves dimensional integrity over repeated use; this longevity translates into fewer replacements and lower total cost of ownership. The inclusion of a calibration certificate documents traceability and helps maintain audit readiness for internal quality processes. Consistent results for production and the workshop Repeatable gauging minimizes variation across operators and shifts. The right‑hand Go configuration is optimised for quick insertion and visual or tactile confirmation of fit, allowing inspectors to determine conformity within seconds. Meeting DIN 13 and the 6H tolerance class means the gauge aligns with established thread acceptance rules, simplifying supplier control and in‑house checks. Robust construction and an ergonomic length support regular, hands‑on use in busy inspection benches or machine tool quality stations while preserving measurement reliability. Where this gauge adds value and how it integrates Ideal for machine shops, quality labs and production lines dealing with metric fine threads, this plug gauge supports routine inspection tasks and incoming part verification. As a Go control instrument it is intended to confirm that threads are within the maximum material condition; rejected parts are then referred for rework or further measurement. The gauge’s traceable calibration ensures documentation for quality management systems and supplier audits. For application queries or tailored inspection strategies, Metav IndustryLine experts can provide guidance on implementing the gauge within existing quality workflows. Contact Metav Werkzeuge for technical advice or to secure calibrated gauges from stock — Metav Werkzeuge, Emmerich: +49 2822 7131930 · info@metav-werkzeuge.com Technical data SKU: M315.515.6 GTIN: 4054469152042 Weight: 2 kg Material: hardened gauging steel Size: M115 x 1.5 Type: Go gauge (GUT) Calibration: calibration certificate included Standard: DIN 13, 6H Facts Nominal diameter: M115 Thread pitch: 1.5 mm Tolerance class: 6H Weight: 2 kg Customs tariff number: 90173000 Special features Right‑hand metric ISO fine thread Hardened gauging steel construction Delivered with calibration certificate Category: thread plug gauge Brand: Metav IndustryLine FAQ What does the Go designation mean for this plug gauge? The Go designation indicates the control mandrel verifies that internal threads are within the acceptable maximum material envelope; the thread plug gauge GUT M115 x 1.5 by Metav IndustryLine confirms that a component’s thread will assemble without interference. Is a calibration certificate included with the gauge? Yes, the gauge is delivered with a calibration certificate; the supplied documentation records the verification results for the Metav IndustryLine plug gauge (SKU M315.515.6) and supports traceability for quality systems. For which applications is this gauge most suitable? This plug gauge is suited to machine shops, inspection benches and production quality control where M115 x 1.5 metric ISO fine threads require rapid acceptance testing and documented proof of conformity. How does conformity to DIN 13 and 6H benefit inspection routines? Conformance to DIN 13 and tolerance class 6H aligns the gauge with standardised thread acceptance rules, simplifying supplier checks, incoming inspection and internal audits for parts with metric fine threads. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x1.5 Thread Ring Gauge Go For ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and a supplied calibration certificate to ensure reproducible thread checks and fewer production interruptions. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge GUT M115 x 1.5 — metric ISO fine thread verification, right‑hand (Metav IndustryLine) The Thread Ring Gauge GUT M115 x 1.5 is a hardened thread gauge for verifying right‑hand metric ISO fine threads in production, incoming inspection and quality assurance. Calibration certificate included Hardened gauge steel construction Complies with DIN 13, tolerance 6g For M115 x 1.5 metric fine threads Consistent conformity checks that cut rework and downtime The ring is engineered for fast, repeatable verification of metric fine threads, reducing the need for rework and supporting continuous production. Built to the DIN 13 standard with a 6g tolerance, this gauge provides an objective pass/fail reference that streamlines routine inspections and eases decision‑making on the shop floor. By replacing subjective assessments with a calibrated physical standard, inspection cycles become more efficient and traceable. Robust material and long service life for industrial use Manufactured from hardened gauge steel, the component resists wear and maintains dimensional stability under frequent use. The material choice delivers predictable performance over time, which lowers total cost of ownership through extended intervals between replacements. A sturdy construction also improves handling during repetitive checks, so quality teams can keep throughput high without compromising measurement reliability. Clear suitability and practical handling for workshops Designed specifically for M115 x 1.5 right‑hand metric fine threads, the gauge is suitable for production control, mounting inspection and supplier incoming checks across metalworking environments. Its geometry matches the ISO fine‑thread form, enabling quick assessment of pitch and thread profile conformity. The compact, straightforward design allows rapid application on production lines and in test benches, helping inspection staff maintain output without lengthy setup. Traceable calibration for audits and quality systems Supplied with a calibration certificate, the gauge supports quality systems and audit requirements by documenting measurement traceability. The certificate confirms that the instrument was measured against recognised references, so inspection records remain defensible during quality assessments. When traceability and demonstrable control are required, the calibrated ring gauge helps satisfy internal and external compliance obligations while underpinning confident release decisions. Select the Metav IndustryLine ring gauge for dependable thread verification and contact Metav Werkzeuge in Emmerich for ordering or technical advice by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: M315.715.6 GTIN: 4054469152523 Weight: 2 kg Facts Thread size: M115 x 1.5 Standard: DIN 13, 6g Customs tariff number: 90173000 Special features Material: Gauge steel, hardened Calibration certificate included Right‑hand metric fine thread Category: Gauges / Thread ring FAQ What thread type does this gauge check? The ring gauge checks right‑hand metric ISO fine threads with the specific size M115 x 1.5 and is manufactured for conformity testing to DIN 13. Is a calibration certificate provided with the gauge? Yes, a calibration certificate is included with the Thread Ring Gauge GUT M115 x 1.5 to ensure traceability and to support quality audits. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which ensures wear resistance and dimensional stability during frequent inspection cycles. Can this gauge be used for production control and incoming inspection? Yes, the ring gauge from Metav IndustryLine is suited to both production control and incoming inspection for verifying thread form and pitch conformity. Which standard and tolerance does the gauge comply with? The instrument complies with DIN 13 and is manufactured to a 6g tolerance suitable for metric ISO fine‑thread verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x1.5 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand — Metav IndustryLine
The hardened no‑go ring for M115×1.5 threads, manufactured to DIN 13 (6g) and made from robust gauge steel, provides consistent rejection control and long service life. Supplied with a calibration certificate for traceable inspection, the gauge supports reliable quality assurance and reduces rework. Order directly via Metav Werkzeuge or consult the in‑house specialists for application advice. Thread Ring Gauge (No‑Go) M115 × 1.5 — Metric ISO fine thread, right‑hand (Metav IndustryLine) Thread Ring Gauge (No‑Go) M115 × 1.5 is a dedicated rejection gauge for checking metric ISO fine threads in right‑hand form, intended for inline or incoming inspection of large‑diameter components No‑go thread ring for M115×1.5 right‑hand Manufactured to DIN 13, tolerance 6g Hardened gauge steel for high durability Supplied with calibration certificate Consistent rejection control reduces assembly risk The no‑go ring is designed exclusively to identify threads that exceed permitted form or size limits; if the ring does not fit, the thread is outside tolerance. Built for M115×1.5 metric fine threads and made from hardened gauge steel, the tool resists wear under repeated use, ensuring dimensional stability over time. By preventing out‑of‑tolerance parts from entering assembly, the gauge lowers the risk of thread failure and costly rework while supporting efficient quality workflows. Traceable verification with an included calibration certificate Delivered together with a calibration certificate, the gauge enables documented, traceable inspection records suitable for production control and audit routines. The supplied certificate confirms the ring’s conformity at the time of calibration and simplifies integration into quality systems. For shops requiring documented measurement evidence, the calibration adds a practical layer of assurance without extra processing—ideal for incoming inspection or final quality sign‑off. Robust construction for workshop and production environments Constructed from gauge steel, hardened, the ring offers the mechanical strength needed for frequent handling in workshop and production settings. The specification DIN 13, 6g defines the thread tolerance class applied during manufacture, matching common engineering practice for fine metric threads. Its right‑hand orientation suits standard thread forms; the durable design supports repetitive checks with minimal maintenance, contributing to predictable throughput and reduced inspection downtime. For a dependable thread inspection solution, request the M115×1.5 no‑go ring from Metav Werkzeuge or speak with our specialists in Emmerich for tailored application guidance Technical data SKU: M315.815.6 GTIN: 4054469152769 Mass / Size: M115×1,5 Material: Gauge steel, hardened Standard: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Type: No‑go (AUSSCHUSS) Thread direction: Right‑hand Supplied with: Calibration certificate Facts Thread size: M115 × 1.5 Tolerance class: 6g (per DIN 13) Weight (approx.): 2 kg GTIN: 4054469152769 Materials & features Material: Gauge steel, hardened Feature: No‑go rejection ring for thread control Documentation: Calibration certificate included Intended use: Inline inspection, incoming goods, final checks FAQ What is the purpose of a no‑go thread ring? A no‑go ring prevents acceptance of threads that exceed permissible dimensions; the M115×1.5 no‑go ring from Metav IndustryLine is used to identify out‑of‑tolerance threads so non‑conforming parts are rejected before assembly. Is a calibration certificate included with the gauge? Yes, the thread ring is supplied with a calibration certificate, providing traceable measurement documentation for quality records. Which tolerance and standard does the ring follow? The ring is manufactured to DIN 13 with a 6g tolerance class for metric fine threads, matching standard engineering requirements for such thread forms. Can this gauge be used for left‑hand threads? No, this particular ring is produced for right‑hand threads only; left‑hand variants must be ordered separately. What materials is the ring made from and how does that affect longevity? The ring is made from hardened gauge steel, which offers high wear resistance and stable dimensions under frequent inspection cycles Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x2 Thread Go Gauge, Metric Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge construction and an included calibration certificate to secure fast, repeatable acceptance checks for fine-pitch metric threads; order through Metav Werkzeuge or consult our specialists for compatibility advice. Thread plug gauge M115 x 2.0 — plug gauge for metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug gauge M115 x 2.0 is a precision control tool for verifying internal threads in accordance with DIN 13, 6H and is intended for right-hand metric fine threads Hardened gauge steel construction Calibration certificate included DIN 13, tolerance 6H Right-hand metric fine thread Reliable inspection where dimensional conformity matters The plug gauge is engineered for consistent pass/fail checks of internal threads and is especially suitable where a clear go/no-go decision is required. With a hardened gauge steel body and dimensional compliance to DIN 13, 6H, the device reduces uncertainty during acceptance testing and inline inspections. The simple, unambiguous result from a plug gauge speeds up inspection cycles and supports productivity gains by avoiding lengthy instrumental measurements where a binary assessment suffices. Robust material and design for workshop use Constructed from hardened gauge steel, the gauge resists wear under routine use and preserves the functional measuring surface over many cycles. The robust build minimises the need for frequent reworking of the tool and supports reproducible checks on components produced in small batches or series manufacture. The relatively compact mass and familiar gauge geometry ensure quick handling by shop staff and maintain practical ergonomics during repetitive checking tasks. Application scope and compatibility with metric ISO threads Designed for M115 × 2.0 metric fine threads with right-hand direction, the gauge serves inspections in mechanical engineering, component assembly and quality control where ISO metric thread standards apply. The tolerance class 6H identifies the internal thread acceptance range and aligns with widely used machine-thread specifications, enabling straightforward integration into existing inspection routines without additional conversion or interpretation effort. Assured traceability through calibration Delivered with a calibration certificate, the gauge provides traceability suitable for quality management processes and documented inspections. The certificate documents the measured dimensions at the time of delivery and supports internal quality records; this is particularly important for regulated production environments or where purchase documentation must demonstrate initial conformity. Regular re-calibration intervals can be planned from the supplied baseline to keep control limits current. Practical benefits for production and inspection planning Using a dedicated plug gauge for go/no-go verification simplifies shop-floor decisions, shortens inspection throughput times and reduces operator interpretation. The combination of standard conformity, durable material and a supplied calibration document supports demonstrable process reliability and helps maintain the flow of parts from machining to assembly or shipment without unnecessary holds. Contact Metav Werkzeuge for availability, delivery options and application advice on Metav IndustryLine thread gauges; technical enquiries may be sent to info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: M315.615.7 GTIN: 4054469153216 Mass: M115×2 Material: hardened gauge steel Norm: DIN 13, 6H Weight: 2 kg Tariff number: 90173000 Special feature: calibration certificate included Facts Thread size: M115 × 2.0 Thread direction: right-hand Tolerance class: 6H Category: plug gauge / thread gauge SKU: M315.615.7 Special features For metric ISO fine threads Hardened gauge steel construction Marked as Ausschuss (reject) item Delivered with calibration certificate Intended for pass/fail internal thread checks FAQ Is this plug gauge suitable for internal threads on ISO metric fine-threaded parts? Yes. The thread plug gauge M115 × 2.0 is specified for metric ISO fine threads and is manufactured to the DIN 13, 6H tolerance class for internal-thread acceptance. Does the gauge come with calibration documentation? Yes. The item is supplied with a calibration certificate that records the measured values at delivery, supporting traceability for quality records. What material and durability can be expected from this gauge? The gauge is made from hardened gauge steel, offering wear resistance appropriate for routine go/no-go inspections in a workshop environment. How is the thread orientation specified? This gauge is produced for right-hand threads; the technical data and markings on the tool identify the orientation. What does the designation "AUSSCHUSS" indicate for this product? The designation in the product label indicates that the item is marked as Ausschuss; the technical data and delivery condition should be reviewed prior to use in critical applications Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x2 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise go/no‑go control, hardened gauge‑steel durability and an included calibration certificate for reproducible thread inspection. The combination of DIN 13 tolerance class, traceable calibration and robust construction supports efficient quality checks and reduces rework. Order the Go Thread Plug Gauge directly via Metav Werkzeuge or consult our specialists for integration into production workflows. Go Thread Plug Gauge M115 x 2.0 — Metric ISO fine thread, DIN 13 6H (Metav IndustryLine) The Go Thread Plug Gauge M115 x 2.0 is a precision inspection gauge for verifying internal metric ISO fine threads in right‑hand components, designed for repeatable pass/fail decisions in production and quality control environments. Hardened gauge steel for long service life Supplied with calibration certificate DIN 13 tolerance class 6H compliance Right‑hand thread M115 x 2.0 Fast, reliable go/no‑go inspection that speeds throughput A dedicated go plug gauge such as this is engineered to provide instant, unambiguous pass/fail results on internal threads. The M115 x 2.0 size matches metric ISO fine‑threaded components commonly found in heavy machinery and large assemblies, allowing quick verification at incoming inspection or directly on the shop floor. Using a purpose‑made gauge minimises measurement time and reduces downstream scrap by catching out‑of‑tolerance parts before assembly. Calibrated and traceable: quality documentation included Delivered with a calibration certificate, the gauge supports documented quality processes and traceability for audits. The supplied certificate confirms the inspection condition at delivery and enables consistent acceptance criteria across shifts and sites. This traceable documentation simplifies compliance with internal quality plans and external customer requirements while providing a clear record for calibration intervals. Durable construction for repetitive workshop use Manufactured from hardened gauge steel, the tool resists wear in continuous use and maintains its functional dimensions for extended intervals. Compliance with DIN 13 and tolerance class 6H ensures the dimensional fit corresponds to established standards for internal threads, so the gauge remains a dependable reference during routine checks. Robust material choice and finish reduce the need for frequent replacement and support predictable maintenance planning. Integrates into workshop and inspection routines The gauge is tailored for metric ISO fine thread applications and is supplied as a right‑hand go gauge for direct compatibility with standard threaded components. It suits machine shops, assembly lines and quality control benches where quick verification prevents assembly errors. Where gauge sets are used, the tool pairs effectively with complementary no‑go gauges or optical inspection to create a layered inspection strategy without complicating operator procedures. For inspection routines that demand clarity and traceability, contact Metav Werkzeuge (Metav IndustryLine) in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss technical suitability and delivery options. Technical data Article number: M315.515.7 GTIN: 4054469153001 Category: Lehren (gauges) Facts Thread: M115 x 2.0 Weight: 2 kg Tariff code: 90173000 Standard: DIN 13, 6H Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Supplied with calibration certificate Marked as Go (GUT) plug gauge Manufacturer: Metav IndustryLine FAQ What does a Go thread plug gauge check? A Go thread plug gauge checks whether the internal thread meets the maximum material limits; the supplied Go gauge M115 x 2.0 verifies that the thread allows the intended mating part to assemble without interference. Is a calibration certificate included with the gauge? Yes, the Go Thread Plug Gauge M115 x 2.0 is supplied with a calibration certificate confirming the inspection condition at delivery. Which standard does the gauge conform to? The gauge is manufactured to DIN 13 and set to tolerance class 6H, matching common specifications for metric internal threads. Can the gauge be used in a production environment? Yes, the gauge’s hardened construction and clear go/no‑go function make it suitable for routine verification on the shop floor and at incoming inspection. How should the gauge be cared for to maintain accuracy? Keep the gauge clean and dry, avoid drops or abuse, and store it in a protective case after use; periodic recalibration should be scheduled according to the calibration certificate or internal quality plan. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x2 Thread Go Ring Metric ISO Fine Thread Right-Handed With Calibration Certificate, DIN 13 6g - Metav IndustryLine
Ensures reliable rejection of out‑of‑tolerance metric ISO fine threads by combining a no‑go ring function with hardened gauge‑steel construction and DIN 13, tolerance class 6g accuracy; supplied with a calibration certificate for immediate use. Order the gauge from Metav Werkzeuge or contact our consultants for application guidance and selection support. Thread Ring Gauge (No‑go) M115×2 — Metric ISO Fine Thread, Right‑hand (Metav IndustryLine) A Thread Ring Gauge (No‑go) M115×2 designed for production and incoming inspection to identify and reject threads that fall outside the permitted tolerance for metric ISO fine threads. No‑go ring for M115×2 metric fine threads Hardened gauge‑steel construction Manufactured to DIN 13, tolerance class 6g Delivered with calibration certificate Consistent rejection where process control matters The primary purpose of this no‑go ring is to provide a fast, unequivocal check during routine inspection and process control. The no‑go ring function prevents acceptance of undersize or improperly formed threads, supporting a lean quality workflow and reducing rework rates. Built around the thread specification for M115×2, this gauge converts technical tolerances into a simple go/no‑go decision at the production line, eliminating ambiguity and speeding up quality decisions. Materials and standards that support traceable results Constructed from hardened gauge steel, the ring maintains dimensional stability in workshop conditions and resists wear over repeated use, which preserves measurement integrity. The gauge is produced to DIN 13 with tolerance class 6g, ensuring compatibility with standard ISO metric fine‑thread production. Because the tool is supplied with a calibration certificate, it can be integrated into traceable inspection routines immediately, providing documented evidence of conformity for audits and supplier control. Practical handling, integration and benefits for inspection routines The compact ring shape and clear designation as a no‑go instrument make handling straightforward for shopfloor inspection teams: insert the threaded part into the ring to check conformity quickly, or employ the gauge in receiving inspection to block non‑conforming batches. The robust material and defined tolerance class minimise maintenance needs and extend service intervals, while the calibration documentation supports planned verification cycles. Together, these features reduce downtime, speed up acceptance processes and bolster overall production reliability. For quoting, delivery options and technical application advice, contact Metav Werkzeuge to discuss how this hardened no‑go thread ring gauge can be integrated into existing inspection plans. Technical data SKU: M315.815.7 GTIN: 4054469153803 Type: No‑go (reject) ring gauge Thread size: M115×2 Hand: Right‑hand Material: Gauge steel, hardened Standard: DIN 13, 6g Net weight: 2 kg Customs tariff number: 90173000 Delivered with calibration certificate Facts Thread nominal diameter: 115 mm Pitch: 2.0 mm Weight: 2 kg Customs tariff number: 90173000 Special features No‑go (reject) ring gauge Hardened gauge‑steel construction Conforms to DIN 13, tolerance class 6g Right‑hand metric ISO fine thread Calibration certificate included FAQ What is the intended use of this no‑go thread ring gauge? The no‑go ring gauge M315.815.7 is intended for quick verification and rejection of metric ISO fine threads (M115×2) in production and incoming inspection to ensure non‑conforming parts are not accepted. Does the gauge come with traceable calibration? Yes, the Metav IndustryLine thread ring gauge is supplied with a calibration certificate, enabling immediate inclusion in documented inspection routines. Which standard and tolerance class does the gauge follow? The instrument is manufactured to DIN 13 with tolerance class 6g, matching common ISO metric fine‑thread specifications for reliable compatibility. What material is the gauge made from and why does it matter? The ring is made from hardened gauge steel, which provides wear resistance and dimensional stability so the ring remains accurate under regular shopfloor use. Can this gauge be used for left‑hand threads? This specific gauge is manufactured for right‑hand metric ISO fine threads (M115×2); left‑hand applications require the corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x2 Thread Ring Gauge, Right-Handed Metric ISO Fine Thread, Hardened Gauge Steel, DIN 13 6g, Calib. Certificate - Metav IndustryLine
Benefit from hardened gauge steel and the supplied calibration certificate for fast, repeatable thread inspection; the ring matches DIN 13 tolerance class 6g for M115 × 2.0 right‑hand metric fine threads. Order the thread ring gauge GUT M115 x 2.0 directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge GUT M115 x 2.0 — Metric ISO fine thread, right‑hand, hardened gauge steel (Metav IndustryLine) The thread ring gauge GUT M115 x 2.0 is a right‑hand go gauge designed for quick verification of metric ISO fine threads in production control and incoming‑goods inspection. Calibrated certificate included Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Nominal size M115 x 2.0, right‑hand thread Reliable inspection with traceable calibration A calibrated gauge removes uncertainty from routine checks: the supplied calibration certificate documents traceability and supports quality records in audits. For incoming goods or final inspection, the GUT‑marked ring provides an immediate Go/No‑Go decision, which shortens inspection cycles and reduces the risk of accepting non‑conforming parts. The conformity to DIN 13 and the clear marking of the nominal size help integrate the tool into documented quality procedures without additional verification steps. Robust construction for repeatable measurements Manufactured from hardened gauge steel, the ring resists wear under frequent engagement and preserves the acceptance limit over many cycles. The heat‑treated material and precise machining ensure repeatable measurements and stable gauge geometry, which is essential for parts with tight assembly tolerances. Its nominal M115 × 2.0 geometry and the tolerance class 6g are suited to fine‑pitch applications where consistent thread form and pitch are critical for reliable assembly and function. Practical integration into production control The ring is intended for rapid thread verification on the production floor and at goods receiving: simply check the part against the marked Go side to confirm compliance with the specified metric ISO fine thread. The compact, single‑piece design simplifies handling and storage; labelling with the nominal size and standard supports fast identification during sampling plans. For bespoke measurement plans or batch‑traceability, the documented calibration assists in fulfilling internal and external inspection requirements, while the ring’s clarity of marking reduces operator error. For traceable, high‑throughput thread inspection, select the Metav IndustryLine GUT M115 x 2.0 and contact Metav Werkzeuge in Emmerich for specification support and procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M315.715.7 GTIN: 4054469153599 Tariff number: 90173000 Weight: 2 kg Material: gauge steel, hardened Size: M115 x 2.0 Standard: DIN 13, 6g Manufacturer: Metav IndustryLine Calibration certificate: included Numbers / Core technical data Nominal thread: M115 × 2.0 Tolerance class: 6g Weight (kg): 2 GTIN: 4054469153599 Tariff number: 90173000 Special features / Versions GUT‑marked thread ring Right‑hand metric ISO fine thread Supplied with calibration certificate Hardened gauge steel for wear resistance Intended for production and incoming‑goods inspection FAQ What tolerance class does the gauge conform to? The ring conforms to DIN 13 with tolerance class 6g, suitable for metric ISO fine threads and documented on the calibration certificate supplied with the thread ring gauge GUT M115 x 2.0. Is a calibration certificate included with the gauge? Yes, the product is supplied with a calibration certificate that documents traceability and supports quality‑assurance records for the Metav IndustryLine thread ring gauge GUT M115 x 2.0. Can the gauge be used for left‑hand threads? This specific item is a right‑hand ring for M115 × 2.0; left‑hand gauges require the corresponding left‑hand version. What material is the ring made from? The ring is manufactured from hardened gauge steel, providing wear resistance and stable geometry for repeatable measurements. How is the gauge applied in a production environment? Use the GUT‑marked side for a Go check during sampling or incoming‑goods inspection; the clear nominal marking speeds identification and reduces operator handling time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x3 Thread Plug Gauge For Metric ISO Fine Thread, Right-Hand Calibrated Certificate, DIN 13 6H - Metav IndustryLine
Take advantage of a right‑hand No‑Go thread plug gauge for M115 x 3.0 that is made from hardened gauge steel and supplied with a calibration certificate; this combination secures repeatable inspections and prevents oversized threads entering assembly. Order directly via Metav Werkzeuge or contact our consultants for application advice and rapid supply. Thread plug gauge (No‑Go) M115 x 3.0 — Right‑hand, DIN 13, 6H (Metav IndustryLine) A Thread plug gauge (No‑Go) M115 x 3.0 intended for quick verification of metric ISO fine threads in production and incoming inspection environments. Calibrated delivery with certificate For M115 x 3.0 ISO fine thread Hardened gauge steel construction Right‑hand thread, DIN 13 6H Prevent rejects before assembly with a dedicated No‑Go check A dedicated No‑Go plug removes doubt during final thread inspection by proving that a threaded hole does not exceed the maximum material condition. The M115 x 3.0 dimension, specified to DIN 13, 6H, matches common ISO fine-thread applications and therefore reduces the risk of assembly failures or rework. Constructed from hardened gauge steel, the gauge resists wear in routine use and maintains its profile between calibrations, while the included calibration certificate documents traceability for quality records. Robust design for shopfloor throughput and reliable handling This reject thread plug is built for repetitive checks in workshop and inspection stations where speed and repeatability matter. The solid steel construction gives the plug the rigidity required for consistent contact, and its right‑hand orientation corresponds to standard mating parts. Supplied ready for use with documentation, the gauge shortens decision times during incoming inspections and helps to keep production moving by preventing faulty components progressing downstream. Traceability and quality integration for production control Integrating the gauge into control plans provides clear pass/fail criteria that are easy to audit: a correct assembly tolerance is verified without interpretation, saving time on measurement reports. The supplied calibration certificate ensures the check tool can be linked to routine calibration intervals and management systems, supporting product traceability and compliance objectives. Use in routine sampling or 100% inspection where a simple go/no‑go decision accelerates throughput and reduces process variability. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M115 x 3.0 No‑Go thread plug gauge into inspection routines — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance and fast supply Technical Data Article number: M315.615.8 GTIN: 4054469154190 Thread: M115 x 3.0 Label: Thread plug gauge No‑Go M115 x 3.0 Facts Nominal thread: M115 Pitch: 3.0 mm Weight: 2 kg Tariff number: 90173000 Special features Material: Gauge steel, hardened Standard: DIN 13, 6H Orientation: Right‑hand thread Supplied with calibration certificate Type: No‑Go (reject) thread plug gauge Category: Gauge pins; Gauges FAQ What does No‑Go mean for thread inspection? A No‑Go gauge checks that a threaded hole does not exceed the upper tolerance; the Metav IndustryLine No‑Go thread plug gauge M115 x 3.0 must not enter a threaded hole that meets the maximum acceptable dimensions. Is the gauge supplied calibrated? Yes — the Metav IndustryLine thread plug gauge (No‑Go) M115 x 3.0 is delivered with a calibration certificate to document its inspection status. Which standard does this plug gauge follow? The plug is specified to DIN 13, 6H, which defines the tolerance class for metric ISO threads and aligns the gauge with standard fine-thread inspection criteria. What is the gauge made from and why does that matter? The gauge is manufactured from hardened gauge steel, providing wear resistance and dimensional stability that preserve the checking profile during repeated use. How should the plug gauge be stored between uses? Keep the gauge clean and dry, protect it from shock and abrasives, and store it in a safe location to avoid damage; regular calibration checks preserve traceability and accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x3 Thread Ring Gauge For ISO Fine Thread Right-Hand, Scrapped, With Calibration Certificate - Metav IndustryLine
Reliable pass/fail control for metric fine threads through hardened construction and DIN‑compliant tolerances; supplied with a traceable calibration certificate for documented inspections. Order the thread ring gauge (No‑go M115 x 3.0) directly via Metav Werkzeuge or ask our consultants if needed. No‑go thread ring gauge M115 x 3.0 — Metric ISO fine thread, right‑hand (Metav IndustryLine) A No‑go thread ring gauge M115 x 3.0 designed for fast, repeatable assessment of metric ISO fine threads in production and inspection environments Hardened gauge steel construction DIN 13 tolerance 6g conformity Calibration certificate included Right‑hand metric fine thread Secure, repeatable go/no‑go decisions on metric fine threads The no‑go thread ring gauge is engineered to provide a clear accept/reject verdict for components with metric ISO fine threads. Manufactured from hardened gauge steel, the ring maintains its form under repeated use, ensuring reproducible results across inspection cycles. Compliance with DIN 13 and the 6g tolerance band gives a measurable reference that fits established engineering standards; this makes the tool suitable for quality control stations where consistent criteria and documented traceability are mandatory. The robust design reduces uncertainty in routine checks and contributes to stable process capability. Traceable calibration for production control Supplied with a calibration certificate, the gauge arrives ready for integration into the inspection routine. The certificate documents the measurement condition at shipment, enabling auditors and production engineers to verify conformity and incorporate the tool into their traceability chain. For manufacturing lines that require documented evidence of measurement equipment status, this feature reduces administrative effort and supports ISO‑aligned quality systems. The inclusion of a calibration certificate also simplifies the scheduling of future recalibrations and helps maintain documented measurement integrity. Practical efficiency in the workshop and inspection bench Marked for no‑go (reject) checking, the gauge allows quick decision‑making: if the no‑go side enters the thread, the part is out of tolerance and requires rework or rejection, streamlining sorting workflows and reducing downstream defects. The right‑hand configuration matches common metric fastener orientations, so the tool integrates seamlessly into standard inspection jigs and test benches. With a nominal dimension of M115 x 3.0, the ring is ideal for medium‑large threaded components typical in heavy machinery, housings and assemblies where reliable thread control prevents assembly failures and costly rework. Durable handling and trusted supply chain At approximately 2 kg, the gauge balances stability and handling for bench use or controlled inspection stations; its hardened construction minimises wear and preserves the measuring edge over time. Sourcing through Metav IndustryLine gives access to a European quality filter and established logistics: Metav combines a broad product range with a track record of consistent supply and technical advice. For production planners and quality engineers, the combination of DIN conformity, robust material choice and accompanying calibration documentation supports a measurable improvement in inspection reliability. Secure this Metav IndustryLine calibrated no‑go thread ring gauge M115 x 3.0 from Metav Werkzeuge to standardise thread acceptance and retain full measurement traceability for production and audit purposes. Technical data Article number: M315.815.8 GTIN: 4054469154572 Thread: M115 x 3.0 Handedness: right‑hand Material: hardened gauge steel Norm: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Facts Nominal size: M115 Pitch: 3.0 mm Weight: 2 kg Tariff code: 90173000 Special features Calibration certificate included No‑go (reject) designation for quick sorting Right‑hand metric ISO fine thread Hardened gauge steel for long service life FAQ How is a no‑go thread ring gauge used in inspection? A no‑go thread ring gauge is inserted into the thread; if it enters cleanly the part is deemed non‑conforming. The No‑go thread ring gauge M115 x 3.0 (Metav IndustryLine, SKU M315.815.8) is intended for decisive reject checks on metric ISO fine threads. Is a calibration document supplied with the gauge? Yes. The product is supplied with a calibration certificate that documents the measurement condition at delivery and supports traceability in quality systems. Which standard and tolerance class does this gauge comply with? The gauge conforms to DIN 13 with tolerance class 6g, matching the specified acceptance criteria for metric ISO fine threads. Is this gauge suitable for right‑hand threads only? Yes. The tool is manufactured for right‑hand metric threads and is intended for applications where that orientation is required. What does the 'no‑go' designation mean for process control? The no‑go function provides an immediate reject indication, enabling rapid sorting and reducing the chance of non‑conforming parts reaching assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x3 Thread Ring Gauge Go Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 tolerance 6g and an included calibration certificate to ensure reliable thread inspection and consistent acceptance decisions; order directly via Metav Werkzeuge or consult the specialists if technical advice is required. Go ring gauge M115×3 (metric ISO fine thread, right‑hand) — Metav IndustryLine The Go ring gauge M115×3 is a right‑hand ring gauge for rapid verification of metric ISO fine threads in incoming inspection and production control, designed for repeatable acceptance testing and traceable quality records. Included calibration certificate Hardened gauge steel construction Metric ISO fine thread M115×3 Tolerance 6g to DIN 13 Assured conformity for production control A Go ring gauge serves as a direct, physical proof that a threaded part meets a defined acceptance limit. The M115×3 Go ring gauge, compliant with DIN 13 at 6g, provides a straightforward pass/fail check that eliminates ambiguity in acceptance testing. By using a dedicated ring gauge for the fine thread series, inspectors gain a fast, reliable method to confirm interchangeability and reduce downstream rework. The discrete acceptance criterion shortens inspection cycles and supports consistent quality metrics across batches. Durable construction for long service life Built from hardened gauge steel, the ring resists wear and delivers stable contact geometry over repeated use. The material choice minimises dimensional drift and maintains the functional envelope of the thread seat, so calibration intervals can be optimised without compromising confidence. For workshops and inspection benches where throughput and robustness matter, this construction reduces total cost of ownership by lowering the frequency of replacements while preserving measurement integrity. Traceable calibration to support quality systems A delivered calibration certificate accompanies the gauge, enabling immediate traceability in quality documentation and audit trails. The certificate documents the acceptance condition at delivery and supports internal control plans and supplier quality agreements. For regulated environments and certified quality systems, this paperwork simplifies record keeping and helps to demonstrate that inspection tools were verified prior to use. Practical handling and typical applications Designed as a right‑hand Go ring for metric ISO fine threads, the gauge is intended for use in incoming inspection, first-article checks and random sampling across production. Its compact, robust form is suitable for routine bench checks and integration into go/no‑go testing stations. The simple functional principle—if the part threads onto the Go ring without excessive force, the thread is acceptable—makes it accessible to shopfloor staff while still delivering a technically sound verdict. Contact Metav Werkzeuge today to discuss acquiring the Metav IndustryLine Go ring gauge M115×3 with calibration certificate or to request tailored advice for integration into inspection workflows. Technical data Article number: M315.715.8 GTIN: 4054469154381 Size: M115×3 Material: hardened gauge steel Standard: DIN 13, 6g Weight: 2 kg Tariff code: 90173000 Type: Go ring gauge, right‑hand Calibration: calibration certificate included Facts Thread pitch: 3.0 mm Tolerance class: 6g Mass: 2 kg GTIN numeric: 4054469154381 Tariff number: 90173000 Special features Hardened gauge steel for wear resistance Metric ISO fine thread application Supplied with calibration certificate for traceability Intended for production and incoming inspection use FAQ What does a Go ring gauge check? A Go ring gauge checks whether an external thread fits within the allowed maximum material condition; the Go ring gauge M115×3 (Metav IndustryLine, SKU M315.715.8) confirms acceptance for the specified metric ISO fine thread. Is a calibration certificate supplied with the gauge? Yes, the gauge is supplied with a calibration certificate that documents the inspection condition at delivery and supports traceability in quality records. Which standard and tolerance does this gauge follow? The ring gauge conforms to DIN 13 with tolerance class 6g for metric ISO fine threads, ensuring compatibility with common engineering acceptance criteria. Can this gauge be used for left‑hand threads? This particular item is a right‑hand Go ring gauge; left‑hand thread checks require the corresponding left‑hand gauge or a dedicated left‑hand set. What maintenance is recommended to preserve accuracy? Regular cleaning and careful handling are advised; the hardened gauge steel resists wear, and the included calibration certificate gives a baseline for establishing appropriate recalibration intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x4 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and precise DIN 13 (6g) tolerance for repeatable pass/fail inspection; the ring is supplied with a calibration certificate to support traceable quality control. Order the gauge via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge GUT M115 x 4.0 — GO gauge for metric ISO fine threads, right-hand — Metav IndustryLine The Thread ring gauge GUT M115 x 4.0 is a GO-type inspection gauge for right-hand metric ISO fine threads, intended for workshop and inspection use Includes calibration certificate Hardened gauge steel DIN 13 tolerance 6g GO ring for M115 x 4 threads Consistent pass/fail checks to reduce rework A GO ring gauge provides a rapid, unambiguous check that internal threads conform to the specified profile. The GO gauge verifies that threads meet the DIN 13 (6g) tolerance band so that correctly manufactured components can continue through assembly without delay. Built from hardened gauge steel, the device resists wear and keeps the gauge profile stable over repeated use, which reduces the need for frequent replacements and helps maintain production throughput. Traceable calibration for reliable quality control Supplied with a calibration certificate, this gauge supports documented quality procedures and internal audits. The certificate documents the gauge condition at delivery, enabling labs and workshops to incorporate the tool into their inspection plans with traceability. For manufacturers and QA departments, calibrated gauges simplify conformity checks and provide a defensible record for acceptance testing and supplier control. Robust handling and clear application scope Sized for large-diameter fine threads (nominal 115 mm diameter with 4.0 mm pitch) and finished for right-hand metric ISO applications, the gauge suits inspection points where swift go/no-go decisions are required. The compact, single-piece ring design eases handling despite the significant diameter, and the mass of approximately 2 kg gives the tool a solid feel while remaining portable for shop-floor use. As a GO-type ring it confirms acceptability; NOGO control should be used where full verification is required. Contact Metav Werkzeuge today to secure this Metav IndustryLine GO thread ring gauge and request further technical details or assistance with application matching, with reliable supply from our Emmerich facility Technical data Article number: M315.715.9 GTIN: 4054469155128 Size: M115 x 4 Weight: 2 kg Specifications Norm: DIN 13, 6g Material: Gauge steel, hardened Thread direction: Right-hand Type: GO gauge Customs tariff number: 90173000 Special features Includes calibration certificate Suitable for metric ISO fine threads Category: Gauges / Thread gauges Manufacturer: Metav IndustryLine FAQ What does a GO gauge check for? A GO ring gauge confirms that an internal thread accepts the correct mating profile; the Thread ring gauge GUT M115 x 4.0 (Metav IndustryLine, SKU M315.715.9) indicates that the thread is within acceptable limits for assembly. Is the gauge delivered calibrated? Yes, the product is delivered with a calibration certificate, documenting its condition at the time of dispatch for integration into quality systems. Can this gauge be used for left-hand threads? No, this ring is manufactured for right-hand metric threads; left-hand applications require a corresponding left-hand gauge. How does DIN 13 (6g) affect inspection? The DIN 13 (6g) designation defines the tolerance class for external threads; using the matching GO ring ensures the thread profile complies with that tolerance band for reliable mating. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x4 Thread Go/No-Go Plug Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Take accurate, fast go/no‑go checks without compromise: the hardened gauge‑steel construction and compliance with DIN 13, 6H ensure reproducible thread assessment for metric fine threads, while the supplied calibration certificate documents measurement traceability. Order the item directly via Metav Werkzeuge or contact our consultants for application advice. M115 x 4.0 No‑go thread plug gauge — hardened gauge steel, metric ISO fine thread, right‑hand (Metav IndustryLine) The M115 x 4.0 No‑go thread plug gauge is a right‑hand control gauge for quick pass/fail inspection of metric ISO fine threads in production and quality control environments Hardened gauge steel construction For metric ISO fine threads M115 x 4 Supplied with calibration certificate Rapid, reliable pass/fail inspection for metric fine threads The no‑go plug serves as a concise, objective check against oversize or out‑of‑tolerance threads: when the no‑go does not enter, the thread meets the maximum‑material condition; if it does, the component is rejected. This binary assessment saves time compared with dimensional measurement and reduces operator interpretation. The instrument is dedicated to M115 x 4.0 metric ISO fine threads and is optimised for repetitive use in workshop and shop‑floor settings, delivering consistent results with minimal training. Robust construction and standard compliance for traceable checks Manufactured from hardened gauge steel, the gauge resists wear and preserves functional limits over many cycles. It is produced to DIN 13, 6H, a recognised tolerance class for metric threads, which ensures compatibility with standardised thread production and inspection procedures. Delivery includes a calibration certificate, documenting the inspection status and providing traceability for quality records — an essential element for audited production lines and incoming inspection routines. Practical benefits in the inspection workflow As a dedicated no‑go plug gauge, the instrument enables immediate decisions at control stations: faster throughput, fewer measuring steps and a clear rejection criterion. The right‑hand thread configuration matches standard component orientations. The compact, solid design balances handling and durability, making it suitable for in‑process checks as well as final inspection. Recurrent use reduces reliance on complex measuring devices for routine checks, preserving lab resources for critical dimensional analysis. Why trust this gauge for everyday production control Built for industrial use and supplied with documented calibration, the gauge supports a dependable quality regime. Integration into a go/no‑go procedure reduces ambiguity and helps maintain consistent output quality. Metav IndustryLine products are backed by the distributor’s European quality filter, providing a local point of supply and a predictable channel for replacements or additional gauges. Contact Metav Werkzeuge to confirm suitability of the Metav IndustryLine M115 x 4.0 no‑go thread plug gauge for specific components or to request detailed measurement documentation from our consultants Technical data Article number: M315.615.9 GTIN: 4054469154947 Label: Gewinde‑Lehrdorn AUSSCHUSS M 115 X 4,0 für metrisches ISO‑Feingewinde, rechts Material: Lehrenstahl, gehärtet Standard: DIN 13, 6H Facts Major diameter: 115 mm Pitch: 4.0 mm Weight: 2 kg Tariff number: 90173000 Special features Product type: No‑go thread plug gauge Thread direction: Right‑hand Supplied with calibration certificate Category: Gauges / Thread inspection FAQ What is the purpose of a no‑go thread plug gauge? A no‑go thread plug gauge provides a binary check for internal thread acceptance; with the M115 x 4.0 no‑go thread plug gauge (M315.615.9) a thread that accepts the no‑go is considered out of tolerance and should be rejected. Does the gauge come with calibration documentation? Yes, the gauge is supplied with a calibration certificate, which documents the inspection and allows the Metav IndustryLine gauge to be integrated into traceable quality systems. Which standard does this gauge correspond to? The instrument is manufactured to DIN 13, 6H, matching common metric ISO fine‑thread tolerances for reliable comparison with production threads. Can this gauge be used on left‑hand threads or other sizes? This specific item is a right‑hand M115 x 4.0 no‑go plug gauge; for left‑hand or different thread sizes, corresponding gauges from the same product range should be selected. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x4 Thread Ring Gauge, Right-Hand, ISO Fine Thread 6g, Hardened Gauge Steel, Calibrated Certificate - Metav IndustryLine
Take advantage of precise, repeatable thread inspection combined with robust, hardened construction and traceable calibration documentation; this ring gauge ensures consistent quality control for metric ISO fine threads and supports efficient go/no‑go checks on the shop floor. Order directly via Metav Werkzeuge or consult the team for specification matching. Thread ring gauge (no‑go) M115×4 — metric ISO fine thread, right‑hand (Metav IndustryLine) A Thread Ring Gauge M115×4 designed for rapid verification of metric ISO fine threads in production and inspection environments Hardened gauge steel construction Calibrated with certificate included Conforms to DIN 13, tolerance 6g For right‑hand metric fine thread M115×4 Faster inspection, fewer rejects on the production line The ring serves as a dedicated no‑go verification tool for metric fine threads, enabling quick acceptance checks that prevent out‑of‑tolerance parts from progressing through assembly. With a clear reference to DIN 13 and tolerance 6g, the gauge converts technical limits into immediate pass/fail decisions, reducing cycle time at inspection points and lowering overall scrap rates. The compact, positive‑fit design simplifies handling in busy quality departments while keeping throughput consistent. Traceable measurements and quality assurance for audits Delivered with a calibration certificate, the gauge supports traceability and audit requirements expected in industrial production. The included documentation records the measurement baseline for internal quality systems and external inspections, so measurement results can be reliably compared over time. From first‑article inspection to routine batch checks, the certified status helps maintain conformity and strengthens supplier confidence in documented processes. Durable build for repetitive shop‑floor use Manufactured from hardened gauge steel, the component withstands repeated use and maintains dimensional stability under normal handling. The robust material choice and precise machining preserve the thread profile needed for consistent engagement with the inspected threads, while the right‑hand orientation and M115×4 size are tailored for larger fine‑thread applications. The solid construction supports frequent go/no‑go cycles with low maintenance demands, contributing to long service life and dependable performance. Contact Metav Werkzeuge today for specification matching and to obtain the Metav IndustryLine ring gauge with calibration certificate—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M315.815.9 GTIN: 4054469155302 Tariff number: 90173000 Weight: 2 kg Thread: M115×4 Material: hardened gauge steel Standard: DIN 13, tolerance 6g Facts Type: no‑go (reject) ring gauge Thread size: M115×4 Tolerance class: 6g Hand: right‑hand Special features Calibrated — calibration certificate included Suitable for metric ISO fine threads Robust, hardened construction for repeated checks Category: gauges / measuring devices FAQ How is the gauge delivered with regard to calibration? The ring gauge is supplied calibrated and includes a calibration certificate that documents the measurement baseline for the Metav IndustryLine thread ring gauge M115×4. Can this gauge be used for acceptance and production checks? Yes, the M115×4 no‑go ring gauge is intended for rapid go/no‑go verification in both incoming inspection and on‑line production control. What standard and tolerance does the gauge comply with? The ring gauge conforms to DIN 13 with a 6g tolerance class specified for the device. Is the gauge suitable for right‑hand and left‑hand threads? This specific item is manufactured for right‑hand metric fine threads only; left‑hand variants require a different specification. What material is the gauge made from and why is it advantageous? Constructed from hardened gauge steel, the Metav IndustryLine gauge offers dimensional stability and wear resistance for repeated inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x6 Thread Gauge Go/No-Go For ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 tolerance class 6g and the included calibration certificate for reliable pass/fail inspection of metric fine threads; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge AUSSCHUSS M115×6.0 — right-hand metric ISO fine thread (Metav IndustryLine) A thread ring gauge AUSSCHUSS M115×6.0 for quick verification of right‑hand metric ISO fine threads; designed for workshop inspection and routine quality control. Hardened gauge steel construction Calibrated on delivery with certificate For metric ISO fine thread M115×6.0 Right‑hand thread verification Fast pass/fail control for fine-thread inspection The AUSSCHUSS marking denotes a reject‑type ring intended for clear pass/fail checks of external threads. As a thread ring gauge, it allows a rapid decision whether a manufactured thread meets the specified limits of DIN 13 with tolerance class 6g. Using a dedicated reject ring reduces inspection time compared with detailed measuring instruments, because the gauge confirms conformity by fitment rather than by dimensional readout. This saves production time and lowers the risk of shipping non-conforming parts, supporting more consistent throughput in repetitive thread manufacturing. Durable construction for consistent results on the shop floor Manufactured from hardened gauge steel, the gauge offers wear resistance that preserves the functional limits over many inspection cycles. Robust material choice and precise hardening reduce dimensional drift, so repeatability remains high even under frequent use; the unit weight of 2 kg provides a stable handling feel during manual checks. This combination of stiffness and stability translates into fewer verification errors and longer intervals between re‑calibration, which is particularly valuable in busy machining or assembly environments where reliable gauges must withstand daily handling. Traceable calibration for documented quality assurance The product is delivered with a calibration certificate, ensuring traceability of results for quality records and audits. The supplied certificate documents the condition of the gauge at delivery and supports internal quality systems and customer inspections. For organisations that require documented evidence of measurement capability, the calibrated ring gauge simplifies acceptance processes and provides a defensible inspection record. The gauge’s specification and factory calibration reinforce confidence in routine checks of metric ISO fine threads. Practical integration into inspection workflows Intended for verification of M115×6.0 right‑hand metric fine threads, the gauge integrates smoothly into in‑process or final inspection routines. Compliance with DIN 13, 6g means the tool matches common thread production standards, so it can be used to quickly screen batches before full dimensional analysis. The concise functional design supports efficient handling and a low training threshold for shop personnel. When paired with clear inspection instructions and the delivered calibration documentation, the gauge becomes a straightforward element in a robust quality assurance chain. Contact Metav Werkzeuge to secure this calibrated Metav IndustryLine reject ring gauge and receive tailored advice on integrating it into existing inspection procedures. Technical data Article number: M315.815.A GTIN: 4054469155876 Brand: Metav IndustryLine Thread designation: M115×6.0 Material: Gauge steel, hardened Standard: DIN 13, 6g Weight: 2 kg Tariff code: 90173000 Facts Thread size: M115 × 6.0 Tolerance class: 6g Handedness: Right‑hand thread Calibration: Certificate included Special features Marking: AUSSCHUSS (reject gauge) Application: Verification of metric ISO fine threads Delivery condition: Calibrated with certificate Category: Thread ring gauge FAQ What does AUSSCHUSS mean on this gauge? AUSSCHUSS indicates a reject‑type ring gauge used for pass/fail control; the thread ring gauge AUSSCHUSS M115×6.0 is intended to identify non‑conforming external threads. Which thread standard does the gauge check? The gauge verifies right‑hand threads produced to metric ISO specification and is matched to DIN 13 with tolerance class 6g. Is the gauge supplied calibrated? Yes — the gauge is supplied with a calibration certificate, documenting its condition at delivery and supporting quality records. What material is the gauge made from? The ring is made from hardened gauge steel, selected for wear resistance and long‑term stability in inspection use. Can this gauge be used in production inspection? Yes — the robust construction and clear pass/fail function make it suitable for in‑process screening and final checks of M115×6.0 threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x6 Thread Go Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel, Calibrated Certificate - Metav IndustryLine
Take advantage of a rugged, standards‑compliant inspection tool built from hardened gauge steel and supplied with a traceable calibration certificate; the precise DIN 13 / 6H tolerance ensures reliable pass/fail decisions at the control station. Order the calibrated gauge directly via Metav Werkzeuge or consult the team for application advice. Thread plug gauge M115 x 6.0 (metric ISO fine thread), right‑hand — Metav IndustryLine The Thread plug gauge M115 x 6.0 is a right‑hand, metric ISO fine‑thread male gauge intended for fast pass/fail inspection of internal threads to DIN 13 with tolerance 6H. Hardened gauge steel construction Calibrated with certificate included DIN 13 thread tolerance 6H For metric ISO fine thread M115×6, right‑hand Faster, repeatable thread inspection on the production line A compact male plug gauge such as this reduces inspection time by providing an unmistakable go/no‑go result for internal threads. The M115 x 6.0 size and 6H tolerance match common metric ISO fine‑thread specifications, enabling immediate conformity checks without complex measuring setup. In busy production runs, the gauge converts subjective gauging into a clear binary decision, lowering cycle time and reducing reliance on time‑consuming optical or tactile measurements. Built to last for continuous shop‑floor use Manufactured from hardened gauge steel, the mandrel resists wear and maintains dimensional stability under repeated use. The robust construction helps preserve the reference profile over many inspection cycles, which reduces the frequency of replacements and calibrations. A mass of 2.5 kg contributes to a balanced feel that supports steady handling during manual gauging tasks and improves repeatability when checking medium‑sized components. Traceability and conformity that support quality systems This gauge is supplied with a calibration certificate, providing documented traceability suitable for many quality management systems. The conformity to DIN 13 and the clearly defined 6H tolerance class simplify audit evidence and process documentation. The inclusion of a calibration record reduces administrative follow‑up and gives confidence that inspection results are consistent and verifiable across production batches. Contact Metav Werkzeuge for expert guidance on integrating the calibrated M115 x 6.0 plug gauge into inspection routines—Metav Werkzeuge in Emmerich can advise on specifications, availability and delivery; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.615.A GTIN: 4054469155616 Customs tariff number: 90173000 Weight: 2.5 kg Dimensions & core data Thread size: M115 × 6.0 Tolerance class: 6H Thread direction: right‑hand Standard: DIN 13 Special features Material: gauge steel, hardened Supplied with calibration certificate Intended for metric ISO fine threads Category: plug gauge / thread inspection mandrel Condition: AUSSCHUSS FAQ What is the primary use of this plug gauge? The Thread plug gauge M115 x 6.0 is intended for quick pass/fail inspection of internal metric ISO fine threads to DIN 13, ensuring components meet the 6H tolerance class. Does the gauge come with calibration documentation? Yes, the Thread plug gauge M115 x 6.0 is supplied with a calibration certificate that documents traceability and supports quality management requirements. What material is used for the gauge and why does it matter? The Thread plug gauge M115 x 6.0 is made from hardened gauge steel, chosen for wear resistance and dimensional stability to maintain reliable inspection results over time. Can this gauge be used for left‑hand threads? No, the Thread plug gauge M115 x 6.0 is a right‑hand mandrel designed specifically for right‑hand internal threads; left‑hand applications require the corresponding left‑hand gauge. How does DIN 13 / 6H relate to my inspection limits? DIN 13 with tolerance class 6H defines the thread geometry and acceptable limits; the Thread plug gauge M115 x 6.0 is manufactured to that specification to provide meaningful go/no‑go checks against those limits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x6 Thread Go Ring Gauge Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a durable, standards-compliant inspection tool: hardened gauge steel construction, DIN 13 tolerance 6g, and a supplied calibration certificate ensure fast, reproducible thread checks and fewer production interruptions. Order the gauge directly via Metav Werkzeuge or consult our specialists for application support. Thread ring gauge GO M115 x 6.0 (metric ISO fine thread, right-hand) — Metav IndustryLine The Thread ring gauge GO M115 x 6.0 is a hardened inspection gauge for rapid verification of right‑hand metric ISO fine threads in production and quality assurance environments Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Minimise downtime with instantaneous go/no‑go verification A dedicated Go ring gauge for M115 x 6 threads provides immediate, unambiguous pass/fail results on the shop floor, speeding up quality gates and reducing rework. The clear conformity to DIN 13 and the 6g tolerance class simplifies decision making in incoming inspection or final checks: a simple insertion test verifies whether a threaded part is within specified limits, allowing production to continue without time‑consuming measurements when the ring passes. Robust, wear‑resistant design for continuous use Manufactured from hardened gauge steel, the ring resists abrasion and maintains reference geometry during repetitive checks, extending intervals between recalibrations. The solid feel and substantial mass support stable handling, which keeps measurement routine consistent and less prone to operator variation. For busy workshops and quality labs, this means dependable results day after day and lower total cost of ownership through increased gauge longevity. Traceable calibration for documented quality control The gauge is supplied with a calibration certificate, providing documented traceability for internal records and audits. This certificate supports quality management systems by demonstrating that reference tools were verified prior to use, helping to meet customer or regulatory requirements. The presence of traceable calibration evidence simplifies documentation in inspection procedures and supports continuous quality improvement. Easy integration into standard inspection workflows Designed as a practical control tool, the ring gauge fits seamlessly into existing inspection routines and works alongside other measuring instruments used for thread control. The right‑hand metric ISO fine thread designation and standardised tolerance class ensure compatibility with engineering drawings and procurement specifications, making this gauge a straightforward addition to production, maintenance and quality assurance toolsets. For traceable, workshop‑ready thread inspection, contact Metav Werkzeuge to arrange supply of the Metav IndustryLine M115 x 6 Go ring gauge and receive the calibration certificate with delivery. Technical data SKU: M315.715.A GTIN: 4054469155746 Designation: Thread ring gauge GO M115 x 6.0 (right-hand) Core data Thread size: M115 x 6 Tolerance/class: DIN 13, 6g Weight: 3 kg Tariff code: 90173000 Materials & special features Material: Gauge steel, hardened Supplied with calibration certificate Type: Go (GUT) ring gauge Application: Verification of metric ISO fine threads FAQ What does the M115 x 6 marking indicate? The marking denotes a metric ISO fine thread with a nominal diameter of M115 and a pitch of 6 mm; the Metav IndustryLine M115 x 6 Go ring gauge checks conformity to that thread specification. Is the gauge suitable for production use on the shop floor? Yes, the hardened gauge steel construction of this ring gauge is designed for repetitive shop‑floor checks and long service life under normal workshop conditions. Does the delivery include calibration documentation? A calibration certificate is supplied with the gauge, providing traceable verification suitable for quality records and audits. What tolerance class is this gauge manufactured to? The ring gauge is produced to DIN 13, tolerance class 6g, which is specified in the technical data for consistent inspection criteria. Can this gauge be used for left‑hand threads? No, this specific item is a right‑hand thread gauge; left‑hand threads require the corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x6 Thread Plug Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
This GO thread plug gauge combines hardened gauge steel, compliance with DIN 13 (6H) and a delivered calibration certificate to secure repeatable thread inspection; order the gauge directly via Metav Werkzeuge or contact the consultants for application advice. Thread plug gauge GO M115 x 6 — Metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug gauge GO M115 x 6 is a hardened inspection plug designed for verifying right‑hand metric ISO fine threads to DIN 13 with 6H tolerance, ideal for production control and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Delivered with calibration certificate Right‑hand metric fine thread M115 x 6 Consistent inspection for threaded production The main benefit of a precision inspection plug lies in its ability to deliver quick, objective results during routine checks. Manufactured from hardened gauge steel, this inspection plug resists wear and preserves the M115 x 6 profile over many cycles, which reduces recalibration frequency and keeps throughput steady. Using a dedicated GO gauge for acceptance checks shortens control times and avoids ambiguous judgements that slow down assembly and rework processes. Engineered for repeatability and traceability Designed in accordance with DIN 13 and specified for the 6H tolerance class, the gauge provides a clear pass condition for internal threads, enabling consistent quality decisions at the control station. The combination of robust material and standardised tolerancing means that the inspection plug supports process stability: measurements and accept/reject outcomes are repeatable and can be recorded as part of quality documentation, simplifying audits and production reports. Calibrated delivery for immediate use and compliance Supplied with a calibration certificate, the gauge arrives ready for use in formal inspection routines and integration into quality systems. The certificate documents the inspection status at delivery, providing traceability for first‑article inspection and supplier records. Traceable calibration reduces administrative effort when proving conformance and supports a streamlined workflow between workshop, quality and procurement departments. Order the Metav IndustryLine thread plug gauge via Metav Werkzeuge for robust, traceable thread inspection — phone +49 2822 7131930 or email info@metav-werkzeuge.com for application support and procurement assistance Technical data Article number: M315.515.A SKU: M315.515.A GTIN: 4054469155487 Category: Lehren / Messstifte Numbers / Core technical data Thread size: M115 x 6 Weight: 3 kg Tariff number: 90173000 Standard: DIN 13, 6H Special features / Versions Material: hardened gauge steel Thread direction: right‑hand Gauge type: GO (accept) gauge Supplied with calibration certificate FAQ What does the GO designation mean for this gauge? The GO marking indicates this is the acceptance (GO) plug; the Thread plug gauge GO M115 x 6 confirms whether an internal thread meets the specified profile and tolerance class. Is the gauge ready for use on arrival? Yes, the gauge is supplied with a calibration certificate, so the Thread plug gauge GO M115 x 6 can be used immediately in inspection routines with documented traceability. Which standard and tolerance does the gauge follow? The inspection plug is manufactured to DIN 13 and specified for the 6H tolerance class, matching standard metric ISO fine thread requirements. What material is the gauge made from and why does it matter? Constructed from hardened gauge steel, the plug offers high wear resistance and dimensional stability, ensuring sustained accuracy across repeated inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115×3 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combine precise thread checking with robust, hardened construction and an included calibration certificate for immediate use in quality control. Order the Go plug gauge M115 x 3.0 directly via Metav Werkzeuge or ask our consultants if needed. Go plug gauge M115 x 3.0 — Plug gauge for metric ISO fine threads (right-hand, hardened steel) The Go plug gauge M115 x 3.0 is a right-hand plug gauge for verifying metric ISO fine threads, designed for fast go/no‑go inspection in workshop and production settings Hardened gauge steel construction For metric ISO fine thread M115×3 DIN 13, tolerance class 6H compliance Supplied with calibration certificate Fast, reliable go/no‑go checks for production control A dedicated Go plug gauge simplifies thread acceptance with an immediate pass/fail result, reducing inspection time and keeping assembly flow steady. The gauge is specified for M115 × 3 metric fine threads to the DIN 13, 6H profile, which ensures compatibility with standardised components. Using a purpose‑made plug for the right‑hand thread eliminates guesswork during incoming inspection and inline checks, delivering reproducible decisions that support efficient quality control. Durable design for long service life and repeatability Manufactured from hardened gauge steel, the gauge combines wear resistance with dimensional stability, so tolerances remain consistent across repeated cycles. The robust material choice limits profile wear and reduces recalibration frequency, which lowers lifecycle costs and downtime. Its compact, single‑piece form is optimised for tactile handling during manual checks and for integration into fixture‑based inspection routines, offering a balance of durability and ergonomic use in routine metrology tasks. Traceable calibration for documented measurement confidence The tool is supplied with a calibration certificate, making it immediately suitable for documented quality systems and audits. Calibration provides traceability of the measured dimension and confirms conformity to the specified thread standard, supporting process validation and supplier control measures. For environments that require documented assurance, the included certificate streamlines record keeping and underpins measurement reliability across production and inspection workflows. Choose the Metav IndustryLine Go plug gauge for consistent thread assessment and contact Metav Werkzeuge for application advice or to place an order; expert consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.515.8 GTIN: 4054469154008 Thread size: M115 x 3 Material: hardened gauge steel Standard: DIN 13, 6H Weight: 2 kg Facts Thread pitch: 3.0 mm Tolerance class: 6H Tariff number: 90173000 Special features Go plug gauge for right‑hand metric ISO fine thread Supplied with calibration certificate Robust, single‑piece construction Suitable for production and incoming inspection FAQ Is this gauge suitable for metric ISO fine threads? Yes. The Go plug gauge M115 x 3.0 is designed specifically for metric ISO fine threads and conforms to DIN 13 with tolerance class 6H. Does the gauge come with calibration documentation? Yes. The plug gauge is supplied with a calibration certificate, providing traceability and documentation for quality systems. Can the gauge be used for pass/fail testing on the shop floor? Yes. The Go plug gauge offers immediate pass/fail verification for production and incoming inspection tasks. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel; this ensures wear resistance and dimensional stability for repeatable measurements. Is this a right‑hand or left‑hand gauge? This is a right‑hand plug gauge specified for right‑hand metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115×4 Thread Go Plug Gauge For Metric ISO Fine Thread, Right Hand, Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combining hardened gauge‑steel construction, DIN 13 tolerance class 6H and an included calibration certificate, this plug gauge delivers repeatable verification for M115×4 metric fine threads while reducing inspection uncertainty. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M115 × 4.0 — Metric ISO fine thread, right‑hand (Metav IndustryLine) A Thread plug gauge GUT M115 × 4.0 for fast verification of metric ISO fine threads in production and incoming inspection, right‑hand, to DIN 13 (6H) Hardened gauge steel construction DIN 13 specification, tolerance 6H Calibrated with certificate included Suitable for M115 × 4 metric fine thread Reliable conformity for inspection routines The plug gauge is designed for straightforward go verification of fine metric threads and supports consistent quality control in repetitive inspection tasks. Built to DIN 13 with a 6H tolerance class, the tool verifies whether internal threads meet the nominal profile and pitch requirements; this reduces downstream rework by detecting deviations before assembly. The solid, repeatable checking procedure shortens inspection cycles and improves throughput in production environments. Robust design for workshop use Made from hardened gauge steel, the gauge resists wear under regular use and maintains dimensional stability over many cycles. The right‑hand, fine‑pitch geometry M115 × 4 is machined to preserve contact geometry and minimise measurement scatter, so checks remain reliable even in demanding shopfloor conditions. The compact, single‑purpose construction facilitates quick handling and rapid go/no‑go assessments without complex setup, supporting lean inspection workflows. Traceability and documented accuracy Delivery includes a calibration certificate, confirming the gauge has been checked and documented for conformity; this supports internal quality records and audit trails. The presence of a formal certificate ensures traceability of the verification step within a quality management system and assists acceptance in supplier audits. For customers requiring systematic measurement control, the documented calibration provides evidence of compliance with inspection routines. For assured thread verification with Metav IndustryLine quality, contact Metav Werkzeuge for supply and expert advice — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M315.515.9 GTIN: 4054469154763 Tariff number: 90173000 Facts Thread size: M115 × 4 Weight: 2 kg Standard: DIN 13, 6H Special features Material: gauge steel, hardened Type: GUT (Go) plug gauge, right‑hand Calibration: certificate included Manufacturer: Metav IndustryLine FAQ What thread size and pitch does this gauge check? The gauge checks a metric fine thread of M115 × 4; the SKU for this item is M315.515.9 and it is intended for right‑hand threads. Which standard and tolerance class apply to this plug gauge? This plug gauge is manufactured to DIN 13 and conforms to the 6H tolerance class for metric ISO threads. Is the gauge supplied with traceable calibration? Yes — the gauge is supplied with a calibration certificate, confirming its inspection status and assisting documentation requirements. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the plug gauge is designed for prolonged use with good wear resistance and dimensional stability. Is this a go or no‑go gauge? The designation indicates a GUT (Go) plug gauge suitable for go checks of internal threads to the specified nominal size. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x1.5 Thread Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H With Calibration Certificate - Metav IndustryLine
Take advantage of the combination of precision, conformity to DIN standards and a supplied calibration certificate for dependable in‑process checks. Order the gauge directly via Metav Werkzeuge or consult the team for procurement and calibration details. Go Thread Plug Gauge GUT M118 x 1.5 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Go Thread Plug Gauge GUT M118 x 1.5 is a hardened plug gauge designed for rapid verification of M118 x 1.5 metric ISO fine internal threads to DIN 13, tolerance 6H, suitable for production control and incoming inspection. Hardened gauge steel construction DIN 13, 6H compliance Supplied with calibration certificate Right‑hand metric ISO fine thread Repeatable precision for routine inspection The Go gauge delivers a straightforward, repeatable means to confirm whether an internal thread meets the specified acceptance dimension. Manufactured from hardened gauge steel, the plug maintains form stability under frequent use, reducing wear‑related dimensional drift. Conformity with DIN 13, 6H ensures that the gauge matches established thread form and tolerance definitions, so inspection results are directly comparable with drawing requirements. A single‑feature check such as this supports rapid pass/no‑go decisions in production without the need for complex measurement setups. Fast throughput on the shop floor with clear pass criteria Using a dedicated Go thread plug gauge reduces cycle time for thread checks: the operator inserts the gauge and a positive fit indicates conformity, saving time versus full-profile measurement. The simple mechanical nature of the tool minimises readout interpretation and avoids calibration‑heavy instruments for routine checks. The gauge is lightweight and compact yet robust (weight approx. 2 kg), which helps when multiple checks are required across a batch. The clear mechanical feedback supports process flow and reduces stoppages caused by ambiguous inspection results. Traceable quality assured by calibration This gauge is supplied with a calibration certificate, providing documented traceability for quality systems and audits. Delivered in a condition ready for use, the certificate evidences conformity to the stated inspection basis and creates a verifiable link to measurement standards. The material choice (gauge steel, hardened) and the factory calibration support longevity and repeatability, while the designation as a Go gauge (GUT) clarifies its use as the acceptance check within a go/no‑go scheme. For procurement records the SKU M315.518.6 is available for ordering and traceability. For reliable thread acceptance checks and documented calibration from the Metav IndustryLine range, contact Metav Werkzeuge to arrange supply and to confirm delivery options for the required batch sizes Technical Data SKU: M315.518.6 GTIN: 4054469152059 Tariff number: 90173000 Facts Thread: M118 x 1.5 Tolerance / standard: DIN 13, 6H Weight: 2 kg Material: Gauge steel, hardened Special features Go gauge for right‑hand metric ISO fine threads Supplied with calibration certificate Categories: Measuring pins; Gauges FAQ What does the Go designation indicate for this plug gauge? The Go designation means the plug gauge checks that internal threads accept the gauge when within the permissible lower and upper limits; the Go thread plug gauge GUT M118 x 1.5 (SKU M315.518.6) is therefore intended for acceptance checks rather than profile measurement. Is the gauge compliant with recognised standards? Yes, the gauge is manufactured to the thread form and tolerancing of DIN 13, 6H and is intended for checks against metric ISO fine threads of the specified size. Does the delivery include calibration documentation? The product is supplied with a calibration certificate, which documents the gauge condition at delivery and supports traceability for quality systems and audits. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel; this material choice provides wear resistance and dimensional stability, preserving the gauge geometry during repetitive use. Can this gauge be used for left‑hand threads? This specific item is for right‑hand metric ISO fine threads; left‑hand thread gauges require a corresponding left‑hand variant. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x1.5 Thread Go Ring For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a robust combination of wear-resistant, hardened gauge steel and a DIN 13, 6g conformity to secure consistent rejection of non‑conforming threads in production. Delivered with a traceable calibration certificate, the gauge supports reliable quality control — order via Metav Werkzeuge or consult Metav's specialists for application advice. M315.818.6 — No‑go Thread Ring Gauge M118 x 1.5 (Metric ISO Fine Thread, Right‑hand) — Metav IndustryLine M315.818.6 is a no‑go thread ring gauge designed to check metric ISO fine threads in right‑hand form, providing a quick go/no‑go decision for inline and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, 6g Delivered with calibration certificate Suitable for metric ISO fine threads Ensure only conforming threads pass inspection A dedicated no‑go gauge like this removes doubt in acceptance sampling: the M118 x 1.5 profile is manufactured to the tolerances of DIN 13, 6g, enabling immediate detection of oversize or improperly cut threads. By providing a binary physical check (accept or reject), the gauge reduces interpretation errors compared with visual inspection and supports reproducible decisions on the shop floor. The result is a measurable reduction in downstream rework and a clear audit trail for quality records. Built to withstand repetitive workshop use Constructed from hardened gauge steel, the ring gauge resists wear and maintains dimensional stability over repeated cycles. Hardening and precise finishing preserve the thread form so the tool remains reliable under regular use; this translates into longer service intervals and lower replacement frequency. The compact, robust design suits bench and fixture use alike, giving workshop staff a durable tool for routine process checks. Traceable calibration for documented inspection The gauge is supplied with a calibration certificate, providing traceability and documented conformity at the time of delivery. Calibration evidence supports internal quality systems and simplifies acceptance for incoming inspection. Because a certificate accompanies the gauge, audit preparations are eased and measurement data retain credibility with customers and regulatory bodies. Practical applications and process benefits This no‑go ring gauge is particularly suited to production control, incoming part inspection and final acceptance of metric ISO fine thread components in mechanical assemblies. Used as part of a go/no‑go regime, it helps maintain process capability by quickly identifying non‑conforming items before assembly. The combination of standard conformity and calibration promotes consistent quality decisions and supports efficient shop workflows. Contact Metav Werkzeuge for specification advice and to secure the M315.818.6 no‑go thread ring gauge with calibration certificate from Metav IndustryLine Technical data Article number: M315.818.6 GTIN: 4054469152776 Thread size: M118 x 1.5 Material: Hardened gauge steel Norm: DIN 13, 6g Data Weight: 2 kg Tariff number: 90173000 Special features No‑go (reject) thread ring gauge For metric ISO fine threads, right‑hand Delivered with calibration certificate FAQ What is the purpose of a no‑go thread ring gauge? A no‑go ring gauge provides a physical check for oversize or out‑of‑tolerance threads; the M315.818.6 confirms whether a component fails the specified M118 x 1.5 metric ISO fine thread tolerance. Is the gauge ready for use on arrival? Yes, the M315.818.6 is supplied with a calibration certificate, allowing immediate use in documented inspection routines. Which standard does this gauge follow? The gauge is manufactured to DIN 13, 6g, ensuring compatibility with the relevant metric ISO fine thread specifications. Can this gauge be used on both left‑ and right‑hand threads? This specific item is configured for right‑hand metric ISO fine threads; a left‑hand variant would be required for left‑hand profiles. How does hardened gauge steel benefit routine inspection? Hardened gauge steel increases wear resistance and dimensional stability, preserving the gauge profile over many inspection cycles and reducing the need for frequent replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x1.5 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, Calibrated Certificate Included - Metav IndustryLine
Take advantage of reliable thread inspection through a hardened construction and factory calibration: the combination of gauge‑steel durability, DIN 13 (6H) conformity and an included calibration certificate reduces rework and secures assembly integrity. Order directly via Metav Werkzeuge or consult the team for application advice. Gewinde‑Lehrdorn AUSSCHUSS M118 × 1,5 — no‑go thread plug gauge, hardened gauge steel (Metav IndustryLine) The Gewinde‑Lehrdorn AUSSCHUSS M118 × 1,5 is a no‑go thread plug designed for rapid identification of rejected metric ISO fine threads (right‑hand), supporting quality control in production and inspection workflows Hardened gauge steel construction For M118 × 1.5 metric fine threads Conforms to DIN 13, tolerance 6H Supplied with calibration certificate Prevent faulty assemblies with decisive no‑go gauging A dedicated no‑go plug gauge provides an immediate binary check that separates acceptable parts from rejects, cutting down on time‑consuming measurement cycles. The plug is tailored for M118 × 1.5 metric fine threads and, used within a structured inspection routine, helps to reduce scrap rates and downstream assembly failures. By limiting checks to a fast pass/fail test, inspection throughput increases while process control becomes more consistent. Certified traceability for reproducible results Delivered with a factory calibration certificate, the gauge ensures documented traceability and repeatable conformance checks. Its compliance with DIN 13 and the 6H tolerance band gives a clear normative basis for decisions in incoming inspection and final quality control. The calibration paperwork supports audit requirements and quality records, making this plug gauge suitable where formal verification of thread quality is required. Robust design for reliable workshop use Manufactured from hardened gauge steel, the plug resists wear and maintains gauge form across many inspection cycles, giving long service life even in demanding shop environments. The right‑hand fine‑thread geometry is realised with precise flank form to resist false acceptance. Robust construction plus clear conformity to standards gives confidence at the machine centre and on the inspection bench, reducing rework and promoting consistent component assembly. For secure thread control and certified supply, contact Metav Werkzeuge in Emmerich for application guidance and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.618.6 GTIN: 4054469152295 Label: Gewinde‑Lehrdorn AUSSCHUSS M 118 X 1,5, right‑hand Facts Weight: 2 kg Tariff number: 90173000 Thread size: M118 × 1.5 Special features Material: Gauge steel, hardened Standard: DIN 13 (6H) Function: No‑go (reject) thread plug gauge for metric ISO fine threads, right‑hand Supplied with calibration certificate FAQ What is the intended use of this plug gauge? The plug gauge checks metric ISO fine threads by providing a clear no‑go test; the Gewinde‑Lehrdorn AUSSCHUSS M118 × 1,5 by Metav IndustryLine is intended to identify rejected threads quickly during inspection. Does the gauge come with documentation? Yes — the gauge is supplied with a calibration certificate for traceability and audit purposes. To which standard does the gauge conform? The gauge is manufactured to DIN 13 with a 6H tolerance class, suitable for standard metric fine‑thread inspection. Is this gauge suitable for left‑hand threads? This item is a right‑hand plug gauge for M118 × 1.5 threads; left‑hand versions must be ordered separately. What material and durability can be expected? Made from hardened gauge steel, the gauge offers wear resistance and long‑term dimensional stability under normal inspection use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x1.5 Thread Ring Gauge, ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Reliable conformity checks and long-term dimensional stability are combined in a hardened gauge-steel ring for right‑hand metric ISO fine threads. Supplied with a calibration certificate and manufactured to DIN 13, 6g, this tool supports reproducible thread inspection and helps reduce process scrap. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge GUT M118 x1.5 — Metric ISO fine thread ring for inspection, hardened gauge steel (Metav IndustryLine) The Thread ring gauge GUT M118 x1.5 is a hardened gauge‑steel ring designed to verify right‑hand metric ISO fine threads to DIN 13, 6g, providing a robust solution for incoming inspection and production control. Hardened gauge steel construction Calibration certificate included DIN 13, 6g tolerance class Assured conformity for production and quality control A dedicated thread ring gauge brings fast, repeatable Go/No‑Go checks directly to the inspection bench, and the M118 x 1.5 nominal size is tailored to fine‑thread components. Conformance to DIN 13, 6g means the tool aligns with recognised thread tolerances, enabling clear go/no‑go decisions that speed up acceptance testing and reduce ambiguous measurement calls. The measurable outcome is fewer reworks and a more consistent downstream process. Durable design for frequent workshop use Constructed from hardened gauge steel, the ring offers high wear resistance and dimensional stability under regular handling. The robust build reduces the rate of change in fit over time, which lowers the frequency of interim adjustments and conservations. A compact, precisely finished ring simplifies handling on the shop floor and minimises the risk of accidental damage during routine checks, contributing to a reliable inspection routine. Traceability delivered with every gauge Supplied with a calibration certificate, the ring arrives ready for documented quality systems and traceable records. The included certificate documents the delivered condition and supports audit trails and incoming inspection records. Technical consultation is available from Metav Werkzeuge for specification matching and integration into existing quality processes, ensuring the gauge can be fitted into measurement routines with documented traceability. Arrange supply through Metav Werkzeuge for traceable thread inspection with the Metav IndustryLine M118 x1.5 ring gauge and request any further specification details or delivery options. Technical Data Article number: M315.718.6 GTIN: 4054469152530 Nominal size: M118 x 1.5 Weight: 2 kg Material: gauge steel, hardened Facts Standard: DIN 13, 6g Thread pitch: 1.5 mm Thread direction: right‑hand Tariff number: 90173000 Special features Calibrated with certificate included GUT designation for Go checking Intended for metric ISO fine threads Robust, hardened construction for workshop use FAQ What does the GUT marking mean on this ring gauge? The GUT marking denotes the Go‑side designation; the Thread ring gauge GUT M118 x1.5 is intended for Go checking of the nominal thread size in accordance with its DIN tolerance. Is a calibration certificate included with delivery? Yes, the ring is supplied with a calibration certificate documenting the delivered condition and suitable for inclusion in inspection records. Which standard does the ring gauge comply with? The ring gauge is manufactured to DIN 13, 6g, matching the tolerance class for metric ISO fine threads. Can the ring gauge be used for left‑hand threads? No, this ring is specified for right‑hand metric ISO fine threads; left‑hand variants require a corresponding left‑hand gauge. What is the article number for ordering or reference? The article number for this Metav IndustryLine item is M315.718.6 and the nominal size is M118 x 1.5. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x2 Thread Go Gauge Metric ISO Fine Thread Right-Hand Hardened Plug Gauge DIN 13 6g With Calibration Certificate - Metav IndustryLine
Ensure reliable thread inspection with a hardened gauge steel body, DIN 13 tolerance class 6g and an included calibration certificate for traceable acceptance testing. Order the Thread ring gauge GUT M118 x 2.0 directly via Metav Werkzeuge or consult our specialists for integration into production control. Thread ring gauge GUT M118 x 2.0 — Metric ISO fine thread, right-hand (Metav IndustryLine) The Thread ring gauge GUT M118 x 2.0 is a hardened gauge-steel master for fast, repeatable verification of metric ISO fine threads in inspection and production environments. Hardened gauge steel construction Calibrated delivery with certificate DIN 13, tolerance 6g compliance Suitable for metric ISO fine threads M118x2 Precision that safeguards production quality The ring offers dependable precision for go/no-go checks, designed to reduce costly rework and avoid downtime. Manufactured to DIN 13 with tolerance class 6g, the gauge provides a clear acceptance criterion for machined threads. The dimensional band defined by the standard ensures that threaded parts meet established fit and interchangeability requirements, so inspection results feed directly into quality control decisions and SPC routines. Robust construction for long service life Constructed from hardened gauge steel, the master ring combines wear resistance with dimensional stability, maintaining its form over extended use on the shop floor. This robustness supports frequent handling in production and inspection stations and preserves the calibration interval. The device is a genuine Go (GUT) ring, intended to confirm acceptable thread dimensions on M118 x 2.0 right‑hand metric fine threads, enabling rapid in-line checks without elaborate setup. Traceability and inspection confidence Delivered with a calibration certificate, the gauge secures measurement traceability for internal audits and supplier control. The certificate documents the acceptance state at delivery and supports laboratory records or incoming inspection protocols. For customers who require documented proof of conformity, the included paperwork simplifies audit trails and helps to demonstrate due diligence in component acceptance. For reliable thread acceptance control, order the GUT M118 x 2.0 from Metav IndustryLine via Metav Werkzeuge and request the calibration certificate at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.718.7 GTIN: 4054469153605 Label: Thread ring gauge GUT M118 x 2,0 for metric ISO fine thread, right-hand Categories: Messstifte; Lehren Facts Thread: M118 x 2.0 Tolerance class: 6g (DIN 13) Material: hardened gauge steel Weight: 2 kg Customs tariff number: 90173000 Special features Go (GUT) ring gauge for acceptance testing Calibrated delivery with calibration certificate Right‑hand thread orientation Conforms to DIN 13 standard FAQ What thread size and pitch does this gauge check? The ring checks M118 x 2.0 metric ISO fine threads and is intended for right‑hand threads as specified in the product label. Is a calibration certificate included with the gauge? Yes, the Thread ring gauge GUT M118 x 2.0 is supplied with a calibration certificate that documents the measured acceptance at delivery. What does the 6g tolerance class mean for inspection? Tolerance class 6g refers to the dimensional tolerance band defined under DIN 13 for metric threads; the gauge applies this standard to verify whether a manufactured thread meets the specified acceptance limits. Can this ring be used for routine production checks? The hardened construction and Go‑type design make the gauge suitable for frequent production and incoming‑inspection checks to confirm conformity of threaded parts. Which material is the gauge made from and how does that affect durability? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to extend the usable life under regular inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com