Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M118x2 Thread Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combine precise GO verification for M118 x 2.0 metric fine threads with a hardened gauge steel construction and clear conformity to DIN 13, 6H; delivered with a traceable calibration certificate for documented quality control. Order the gauge directly via Metav Werkzeuge or consult our specialists if application advice is required. Thread plug gauge GO M118 x 2.0 — Plug gauge for metric ISO fine right‑hand threads (Metav IndustryLine) A thread plug gauge GO M118 x 2.0 designed to verify metric ISO fine right‑hand internal threads in production and inspection environments. Includes calibration certificate Hardened gauge steel for long service life Built to DIN 13 tolerance class 6H Ensure correct fit on first pass A GO plug gauge is a straightforward, reliable method to confirm that an internal thread falls within the permitted acceptance envelope. The gauge is manufactured for M118 x 2.0 pitch threads and produced to DIN 13 with tolerance class 6H, which defines the allowable variation in thread dimensions. Using a dedicated plug gauge reduces interpretation errors compared with visual checks and supports rapid in‑process decision making, so conformity can be proven quickly and reproducibly without complex instrumentation. Robust construction that reduces rework Made from hardened gauge steel, the instrument is engineered for wear resistance and dimensional stability under regular shop‑floor use. The solid mass and balance of the gauge contribute to steady handling, minimizing the risk of damage during checking and therefore lowering downtime for replacements. Long service life of the gauge translates directly into fewer repeat inspections and a more consistent production flow, preserving both throughput and component quality. Traceable calibration for audit readiness Delivered with a calibration certificate, the gauge provides documented traceability for quality systems and inspection records. Calibration assures that the go/accept limit corresponds to the specified tolerance band, so measurement outcomes can be recorded with confidence during audits. Clear traceability supports conformity assessments and helps maintain process stability across batches, reducing the incidence of scrap and the need for costly rework. For reliable thread verification and tailored advice on application, contact Metav Werkzeuge and request information quoting SKU M315.518.7 for the Metav IndustryLine plug gauge Technical data Article number: M315.518.7 GTIN: 4054469153018 Tariff number: 90173000 ECLASS: 21170228 Facts Thread size: M118 x 2.0 Tolerance class: 6H (DIN 13) Weight: 2 kg Right‑hand thread Special features Material: Gauge steel, hardened Type: GO plug gauge Includes: Calibration certificate Manufacturer brand: Metav IndustryLine FAQ What is this gauge used for? The plug gauge is intended for verification of internal metric ISO fine threads of size M118 x 2.0; the Metav IndustryLine GO plug gauge checks whether a thread meets the defined acceptance criteria. Does the gauge arrive calibrated? Yes, the gauge is supplied with a calibration certificate, providing documented traceability for inspection records and quality systems. Which tolerance and standard does the gauge follow? Manufactured to DIN 13 and tolerance class 6H, the gauge corresponds to the standardised limits for metric ISO threads. Can this gauge be used on left‑hand threads? No, this instrument is produced as a right‑hand GO plug gauge and is not suitable for left‑hand thread verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x2 Thread Go/No-Go Ring Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of reliable pass/fail inspection and durable construction: the hardened gauge steel body and conformity to DIN 13, 6g ensure consistent assessment of metric fine threads, while the delivery with a calibration certificate provides traceability for quality records. Order or request advice via Metav Werkzeuge for seamless integration into inspection routines. Thread ring gauge (no-go) M118 x 2.0 — metric ISO fine thread, right-hand | Metav IndustryLine The thread ring gauge (no-go) M118 x 2.0 is a right-hand, metric ISO fine-thread reject gauge designed for quick pass/fail checks in production and incoming inspection. No-go ring gauge M118 x 2.0 Hardened gauge steel construction DIN 13, 6g tolerance conformity Delivered with calibration certificate Faster, fail-safe thread inspection for production quality A dedicated no-go gauge offers an immediate, objective check whether a threaded part exceeds maximum material limits. The M118 x 2.0 reject ring is intended for pass/fail decisions in repetitive inspection tasks: if the no-go enters the thread, the component fails and is segregated. This method reduces subjective judgement and accelerates control loops on the shop floor, helping to cut scrap rates and avoid downstream assembly issues. Compliance with DIN 13, 6g means that acceptance criteria are aligned with common industrial standards, supporting consistent batch acceptance across suppliers. Durable design that keeps throughput high Constructed from hardened gauge steel, the gauge resists wear under frequent use and maintains dimensional stability over time, which supports repeatable measurements and fewer replacements. The compact, purpose-made ring geometry ensures uniform contact and minimises the influence of handling on results. Robust materials and a solid manufacturing process reduce the frequency of recalibration, so inspection stations remain productive. The physical build also simplifies storage and handling during shift changes, preserving the tool’s service life and lowering total cost of ownership through longevity. Traceable results and streamlined quality documentation Delivered complete with a calibration certificate, this reject ring supports traceability in quality systems and audit trails. The enclosed documentation records the gauge condition at delivery and can be filed with inspection records to demonstrate conformity during supplier audits or internal reviews. Integration into quality routines is straightforward: the gauge acts as a dedicated control instrument for specific thread forms and sizes, enabling clear go/no‑go criteria at point of inspection and improving overall process reliability. Choose the Metav IndustryLine no-go thread ring gauge M118 x 2.0 for dependable pass/fail control and documented traceability — contact Metav Werkzeuge in Emmerich for technical advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.818.7 GTIN: 4054469153810 Description: Thread ring gauge (no-go) M118 x 2.0, right-hand Brand: Metav IndustryLine Facts Size: M118 x 2.0 Weight: 2 kg Tariff number: 90173000 Norm: DIN 13, 6g Special features No-go (reject) ring gauge for pass/fail control Material: hardened gauge steel Right-hand metric ISO fine thread Delivered with calibration certificate FAQ What is the primary function of this gauge? The thread ring gauge (no-go) M118 x 2.0 is used for quick pass/fail checks to identify threads that exceed permissible limits; a fit indicates rejection. Does the gauge conform to a recognised standard? Yes, the gauge is manufactured to match the requirements of DIN 13, 6g, ensuring compatibility with standard metric ISO fine-thread specifications. Is a calibration certificate supplied with the gauge? A calibration certificate is included with delivery, providing documented traceability for inspection records and audits. What material is the ring gauge made from? The ring is made from hardened gauge steel, selected for wear resistance and long-term dimensional stability during repeated inspections. Which product identifier should be used when ordering? Refer to SKU/Article number M315.818.7 and the description “thread ring gauge (no-go) M118 x 2.0” to ensure correct specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x2 Thread Master Go/No-Go Plug Gauge Metric ISO Fine Thread Right, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Precise DIN 13 6H conformity, a hardened gauge steel construction and an included calibration certificate provide reliable, repeatable pass/fail verification for internal metric fine threads; order directly via Metav Werkzeuge or consult our specialists for batch or tolerance advice. Thread Plug Gauge M118 x 2.0 (Right‑hand) — Metav IndustryLine, hardened gauge steel, DIN 13 6H A Thread Plug Gauge M118 x 2.0 for right‑hand metric ISO fine threads, engineered for fast pass/fail checks in production, inspection and maintenance environments. Hardened gauge steel construction Conforms to DIN 13 tolerance 6H Includes calibration certificate Right‑hand metric fine thread M118x2 Fast, repeatable thread inspection for production lines The plug gauge offers a straightforward, time‑efficient method to verify internal threads without complex measuring equipment. Built to check conformity to DIN 13 with a 6H tolerance class, the gauge enables immediate go/no‑go decisions on the shop floor, reducing cycle times in quality control. As a simple transfer standard, it streamlines routines and lowers the risk of downstream rejects by catching out‑of‑tolerance threads before assembly. Durable design that reduces replacement and downtime Manufactured from hardened gauge steel, the inspection mandrel maintains dimensional stability under frequent use and resists wear in abrasive environments. The robust material and finish mean fewer replacements and consistent performance across production batches, which translates into lower lifecycle costs and less unscheduled downtime. The compact, single‑piece design also supports rapid handling and integration into manual inspection stations. Traceability and compliance to support quality systems Supplied with a calibration certificate, this plug gauge documents traceability for internal audits and customer requirements; the certificate confirms the measurement status at delivery. Conformity to the DIN standard is explicit in the gauge geometry, supporting documentation needs for quality management systems. The gauge is therefore suitable for production control, incoming inspection and routine maintenance checks where documented proof of compliance is required. For batch orders, tolerance clarifications or a specification review, contact Metav Werkzeuge to discuss how this M118 x 2.0 plug gauge can be integrated into existing inspection processes Technical data Article number: M315.618.7 GTIN: 4054469153223 Material: hardened gauge steel Size: M118x2 Standard: DIN 13 Facts Nominal thread: M118 Pitch: 2.0 mm Tolerance class: 6H Weight: 2 kg Special features Right‑hand metric ISO fine thread Supplied with calibration certificate Customs tariff number: 90173000 FAQ What does this gauge check? The thread plug gauge M118 x 2.0 checks internal metric ISO fine threads for conformity to the DIN 13 geometry and 6H tolerance class, giving a clear go/no‑go result. Is the gauge delivered with calibration documentation? Yes, the M118 x 2.0 plug gauge from Metav IndustryLine is supplied with a calibration certificate documenting the measurement status at delivery. Which material is used for the gauge and why does it matter? The gauge is made from hardened gauge steel; this material provides wear resistance and dimensional stability, ensuring consistent inspection results over many cycles. Can the gauge be used in routine shop‑floor inspection? Yes, the plug gauge is designed for rapid pass/fail checks in production and inspection environments and can be integrated into manual inspection stations or fixtures as a quick verification tool. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x3 Thread Go Plug Gauge Metric ISO Fine Pitch Right, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened, gauge‑steel design and exact DIN 13 tolerance to ensure repeatable thread acceptance. The included calibration certificate supports traceable inspection and smooth production release; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go plug gauge M118 × 3.0 – Go plug gauge for metric ISO fine thread, right‑hand (Metav IndustryLine) The Go plug gauge M118 × 3.0 is a hardened, right‑hand plug gauge for fast go/no‑go verification of metric ISO fine threads to DIN 13, tolerance 6H. Hardened gauge steel construction Delivered with calibration certificate Conforms to DIN 13, tolerance 6H For metric ISO fine thread M118×3, right‑hand Faster acceptance checks with traceable results A dedicated go plug gauge accelerates routine thread inspections while reducing interpretation errors from visual checks or manual measuring. The hardened gauge steel body keeps the inspection geometry stable under frequent use, so acceptance decisions are reproducible and quick. Conformity with DIN 13, 6H ensures that the gauge matches industry thread tolerances; the clear pass condition offered by a plug gauge saves tactile comparison time and reduces rework rates. For suppliers and production control, this means fewer bottlenecks at final inspection and a direct improvement in throughput. Durable build that supports everyday workshop use Designed for shop‑floor environments, the solid construction provides resistance to wear and handling; the robust design maintains form over repeated cycles and supports reliable service life. The slender, precision ground thread form and hardened material reduce the need for frequent replacement, lowering long‑term tooling interruptions. With a compact mass of 2 kg and a straightforward go‑fit check, the gauge integrates into incoming inspection routines, assembly verification and first‑off inspections without additional fixturing. Traceable calibration to back quality claims The delivery includes a calibration certificate, enabling documented traceability for internal quality records or customer audits. This certificate records the inspection status at the point of delivery and facilitates inclusion of the gauge in controlled measurement systems. The availability of a formal calibration document supports ISO‑based quality systems, strengthens audit trails and helps maintain supplier confidence when used for acceptance testing of metric ISO fine threads. Practical advantages for procurement and QA planning As a straightforward inspection tool, the plug gauge cuts the cognitive load for operators and creates a binary, easily recorded outcome for production logs. The thread designation M118×3 and right‑hand form make the gauge suitable for large‑diameter fine‑pitch assemblies often found in mechanical engineering and heavy‑duty component production. Where regulatory or contractual specifications require documented conformity, the included calibration paperwork removes ambiguity and streamlines supplier certification. For reliable, traceable thread acceptance choose the Metav IndustryLine Go plug gauge M118×3; contact Metav Werkzeuge for purchase and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.518.8 GTIN: 4054469154015 Tariff code: 90173000 Net weight: 2 kg Core figures Thread size: M118×3 Pitch: 3.0 mm Tolerance class: 6H Conformity: DIN 13 Design & features Material: hardened gauge steel Right‑hand thread form Go plug gauge (pass gauge) Supplied with calibration certificate Category: gauges / gauge pins FAQ What is the primary application of this plug gauge? The go plug gauge M118 × 3.0 is intended for go/no‑go acceptance testing of metric ISO fine threads, providing a fast pass result for inspection of production parts. Does the gauge come with proof of calibration? Yes, the product is delivered with a calibration certificate that documents its inspection status at supply and supports quality records. Which standard does this gauge comply with? The gauge is manufactured to match the requirements of DIN 13 with tolerance class 6H, suitable for metric ISO fine threads. Is the gauge suitable for everyday shop‑floor use? The hardened gauge‑steel construction provides wear resistance for regular inspection cycles, making it appropriate for routine production and incoming checks. What is the manufacturer article number for ordering? The article number for ordering is M315.518.8 and the gauge is listed under Metav IndustryLine as a go plug gauge for M118×3 threads. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x3 Thread Go Ring Metric ISO Fine Pitch Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Precision inspection of external metric fine threads is ensured by the combination of hardened gauge steel construction and conformity to DIN 13, tolerance class 6g; a traceable calibration certificate is supplied for process documentation. Order the thread ring gauge directly via Metav Werkzeug e or consult our specialists for application guidance. Thread ring gauge REJECT M118 x 3.0 — metric ISO fine thread ring, right‑hand; hardened gauge steel, DIN 13 (6g) Thread ring gauge REJECT M118 x 3.0 is a purpose‑built ring gauge for the verification of large‑diameter external metric ISO fine threads in production and incoming inspection environments Hardened gauge steel construction DIN 13 tolerance class 6g Size M118 x 3.0, right‑hand thread Supplied with calibration certificate Reliable inspection for production‑grade threads A robust inspection routine begins with a gauge that resists wear and delivers repeatable results. The hardened gauge steel body provides long service life under repeated use, while the M118 x 3.0 geometry matches the nominal profile for metric ISO fine threads. Conformity with DIN 13 and the 6g tolerance class gives a clear, standards‑based pass/fail criterion for external threads, so dimensional conformity can be assessed rapidly on the shop floor or at the goods‑in station. This reduces downstream rework and supports efficient assembly processes. Traceability and quality assurance made simple Process control is supported by the included calibration certificate, which documents the gauge condition at delivery and allows immediate incorporation into quality records. For audits and batch traceability the certificate provides evidence of inspection capability without additional delays. The combination of a hardened gauge and certificate means the tool is ready for routine use in inspection plans or as a reference standard within the workshop’s quality system. Practical fit for inspection benches and toolrooms Designed for handheld or fixture checks, the ring gauge is straightforward to use and integrates with existing measurement routines. The right‑hand thread orientation and nominal pitch of 3.0 mm align with common fine‑thread components found in heavy machinery and specialised assemblies. The construction and finish support reliable tactile feedback during 'go/no‑go' checks, enabling fast decisions in production environments while maintaining reproducibility between operators. Choose Metav IndustryLine gauges for reliable pass/fail inspection and contact Metav Werkzeuge for delivery and technical advice on integrating this threaded ring gauge into existing quality workflows Technical data Article number: M315.818.8 GTIN: 4054469154589 Size: M118 x 3.0 Thread type: Metric ISO fine, right‑hand Standard: DIN 13, 6g Material: Gauge steel, hardened Weight: 2 kg Facts Tariff number: 90173000 Category: Gauges / Measuring pins SKU: M315.818.8 Special features Supplied with calibration certificate Label designation: AUSSCHUSS (reject) Intended use: Verification of external threads FAQ What is the nominal size and pitch of this ring gauge? The ring gauge is specified as M118 x 3.0, suitable for metric ISO fine threads with a 3.0 mm pitch. Is the gauge delivered ready for use in quality documentation? Yes, the product from Metav IndustryLine is supplied with a calibration certificate that can be included in inspection records. Which standard and tolerance class does the gauge follow? The gauge conforms to DIN 13 and is manufactured to tolerance class 6g, offering a standards‑based pass/fail reference for external threads. What material is the gauge made from and how durable is it? Made from hardened gauge steel, the ring gauge is designed for durability under repeated inspection cycles and stable dimensional behaviour. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x3 Thread Go/No-Go Plug Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction, conformity to DIN 13, 6H, and an included calibration certificate for reliable thread inspection; order certified gauges directly via Metav Werkzeuge or consult our specialists for integration into inspection routines. Thread No-Go Plug Gauge M118×3 — metric ISO fine thread, right‑hand, Metav IndustryLine A Thread No‑Go Plug Gauge M118×3 designed for pass/fail verification of metric ISO fine external threads in production and quality control environments Hardened gauge steel construction Conforms to DIN 13, 6H tolerance Metric fine thread M118×3, right‑hand Supplied with calibration certificate Certified verification for metric fine threads The mandrel is engineered for unambiguous verification of M118×3 metric fine threads and adheres to DIN 13 with 6H tolerance, which ensures compatibility with standard external thread gauges. Supplied with a calibration certificate, the gauge supports traceable acceptance criteria and reduces ambiguity in inspection reports. The hardened gauge steel body maintains form under repeated use, translating into consistent limit checks and fewer measurement-related disputes in incoming inspection and final control. Fast, repeatable in‑line inspection As a no‑go plug gauge, the device provides a quick binary assessment during routine checks: the go/no‑go principle separates conforming parts from rejects without extensive measurement setups. This approach reduces cycle time on the shop floor and lowers the risk of incorrect acceptance. The right‑hand thread form and dimensional setting allow immediate comparators in assembly or inspection stations, enabling operators to make repeatable decisions and maintain production flow with minimal interruption. Robust construction and traceable delivery for quality assurance Built from hardened gauge steel, the plug gauge withstands shop‑floor handling while preserving the functional thread profile. Traceability is supported by the unique GTIN and tariff identifiers, simplifying inventory and quality documentation. Delivered with a formal calibration certificate, the gauge is ready for inclusion in quality systems and audit trails. The combination of durable materials and certified delivery helps to extend service intervals and supports a predictable inspection routine. Contact Metav Werkzeuge today to secure calibrated Metav IndustryLine thread gauges and receive expert advice on integrating this M118×3 no‑go plug gauge into existing quality processes Technical data Article number: M315.618.8 GTIN: 4054469154206 Tariff number: 90173000 Facts Thread: M118×3 Tolerance: DIN 13, 6H Weight: 2 kg Right‑hand thread Special features Material: gauge steel, hardened Supplied with calibration certificate Category: thread plug gauge / gauges Label: AUSSCHUSS (no‑go) FAQ What is the intended use of this plug gauge? The Thread No‑Go Plug Gauge M118×3 from Metav IndustryLine is intended for pass/fail verification of metric ISO fine external threads in production and inspection workflows. Does the gauge come with evidence of calibration? Yes, the gauge is supplied with a calibration certificate that documents traceable verification results for the Metav IndustryLine M118×3 plug gauge. Which standard does the gauge conform to? The gauge is manufactured to meet DIN 13 requirements with a 6H tolerance band appropriate for metric ISO fine threads. What material is the gauge made from and why does it matter? Constructed from hardened gauge steel, the M118×3 plug gauge resists wear and retains the functional thread profile, ensuring repeatable limit checks over extended service life. Can the gauge be used for right‑hand and left‑hand threads? This specific plug gauge is manufactured for a right‑hand metric fine thread (M118×3); left‑hand threads require a dedicated left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M118x3 Thread Ring Gauge Go Metric ISO Fine Thread Right Hand, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and conformity to DIN 13, 6g for reliable thread verification; the included calibration certificate ensures measurement traceability. Order the gauge directly via Metav Werkzeuge or consult our advisors for application guidance. Thread go gauge M118 x 3.0 — Go ring gauge for metric ISO fine thread, right‑hand The Thread go gauge M118 x 3.0 is a precision control ring for verifying right‑hand metric ISO fine threads to DIN 13, 6g in production and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, 6g Supplied with calibration certificate Ensure compliant threads with a robust go gauge A dedicated go gauge provides a fast, unequivocal check for threaded components: the ring must pass over the part to confirm acceptable major diameter and pitch form. Built from hardened gauge steel, this ring resists wear and keeps its dimensional stability over repeated use, reducing the need for frequent replacement. Specified as M118 x 3.0, the gauge is tailored to right‑hand metric ISO fine thread geometry and supports standardised inspection workflows in machine shops and quality departments. Traceable calibration for consistent quality control Delivered with a calibration certificate, the instrument arrives ready for traceable use in quality assurance. The certificate documents measurement references and establishes traceability, simplifying audit preparation and conformity records. Using a calibrated master gauge minimises uncertainty in routine acceptance testing and contributes directly to reduced rework and fewer production interruptions—clear efficiency gains for serial manufacturing and maintenance operations. Fast, practical checks that protect production throughput Designed for simple go/no‑go inspection, the ring enables quick acceptance decisions at the shop floor or at goods‑in inspection. Its compact form and durable material allow comfortable handling during repetitive checks while maintaining repeatability. The tool supports scalable quality control: integrate it into process control cards or use it as a portable master for spot checks on large assemblies. By combining a straightforward inspection method with durable construction, the gauge helps protect component interchangeability and assembly reliability. Discuss suitability with Metav Werkzeuge in Emmerich or request a specialist appraisal to ensure the gauge meets specific production requirements Technical data Article number: M315.718.8 GTIN: 4054469154398 Size: M118 x 3.0 Material: hardened gauge steel Type: go gauge (GUT) Thread direction: right‑hand Facts Nominal diameter: 118 mm Pitch: 3.0 mm Weight: 2 kg Classification: eCl@ss 21170214 Tariff number: 90173000 Special features Conforms to DIN 13, 6g Supplied with calibration certificate Intended for metric ISO fine thread inspection Durable, wear‑resistant gauge steel construction Clear go/no‑go verification FAQ What does "go gauge" mean for this thread ring? A go gauge indicates a pass condition; the Thread go gauge M118 x 3.0 by Metav IndustryLine (SKU M315.718.8) is a go ring that must fit the tested external thread to confirm conformity with the nominal form. Is a calibration certificate included with the gauge? Yes — the M118 x 3.0 go gauge is supplied with a calibration certificate that documents traceability and initial measurement references for quality records. Which standard does this gauge comply with? The gauge is manufactured to match DIN 13, 6g, making it suitable for verifying right‑hand metric ISO fine threads in accordance with that standard. For which applications is this gauge suitable? This go ring is intended for production and incoming inspection in machine shops, tool and mould making, and assembly plants where M118 x 3.0 right‑hand metric ISO fine threads require quick, repeatable verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M11x1.5 Thread Ring Gauge Three-Point Go Thread Right-Hand DIN 13, 6g - Metav IndustryLine
Reliable thread verification with DIN 13 tolerance class and hardened gauge steel provides consistent pass/fail control at the inspection station. The compact M11 x 1.5 ring delivers repeatable right‑hand thread checks for workshop and production use. Order supply or request application advice through Metav Werkzeuge for rapid integration into quality routines. Thread ring gauge M11 x 1.5 (No‑go) — Hardened gauge steel, DIN 13 — Metav IndustryLine A thread ring gauge M11 x 1.5 mm (no‑go) designed for quick verification of right‑hand ISO metric threads according to DIN 13 in workshop and production environments M11 x 1.5 metric thread to DIN 13 Hardened gauge steel for long life Right‑hand ISO metric thread verification Compact ring for rapid pass/fail checks Precise inspection for ISO metric threads that reduces uncertainty The ring serves as a straightforward, reliable control: manufactured for M11 x 1.5 threads and produced to DIN 13 with tolerance class 6g, it acts as a no‑go verification tool for right‑hand metric ISO threads. In practical terms, a no‑go ring either enters a correct thread (indicating oversize or defect) or it does not, so the inspection decision is immediate. This reduces interpretation error and standardises acceptance criteria across shifts, supporting efficient quality control on repetitive production tasks. Built to withstand workshop use while preserving measurement integrity Constructed from hardened gauge steel, the ring is chosen for wear resistance and dimensional stability under frequent handling. The robust material ensures repeated engagement with production parts without rapid degradation, which maintains traceability of measurements over time. The compact geometry and single‑function design simplify storage on the inspection bench and support fast routine checks, helping to keep cycle times short while sustaining repeatable results. Streamlined pass/fail control for assembly and incoming inspection Integrating this ring into inspection routines delivers an immediate pass/fail signal that aligns with lean workflows: faults are detected early, rework is reduced and downstream assembly quality is preserved. The Metav IndustryLine ring gauge M11 x 1.5 is suitable for production lines, manual inspection stations and quality gates where fast, unambiguous verification of right‑hand ISO metric threads is required. Clear results from a simple mechanical gauge complement instrumented metrology systems and help enforce consistent process limits. Choose the Metav IndustryLine thread ring gauge for dependable, repeatable thread verification and contact Metav Werkzeuge for application guidance and supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.211 GTIN: 4054469125633 Nominal thread: M11 x 1.5 Material: hardened gauge steel Tolerance class: DIN 13, 6g Right‑hand thread: yes Numbers eCl@ss: 21170214 Tariff code: 90173000 SKU: M315.211 Special features No‑go ring (ausschuss) Compliance: DIN 13 Category: Gauges / Thread ring Intended use: verification of right‑hand ISO metric threads FAQ What is the primary purpose of this ring gauge? The thread ring gauge M11 x 1.5 is used for go/no‑go style verification of right‑hand ISO metric threads, providing an immediate assessment against DIN 13, tolerance class 6g. Which tolerance class and standard are represented by the gauge? The ring is produced to DIN 13 with tolerance class 6g, intended to check conformity of M11 x 1.5 metric threads. Can the Metav IndustryLine ring be used on a production line? Yes — the hardened gauge steel construction and compact form factor make the Metav IndustryLine thread ring M11 x 1.5 (SKU M315.211) well suited for rapid pass/fail checks at the shop floor or inspection station. Does the thread direction matter when using this gauge? Yes — this ring is manufactured specifically for right‑hand metric ISO threads; using it on a left‑hand thread will not provide valid results. How does this ring support quality management processes? By supplying a simple, repeatable pass/fail indication, the gauge helps to prevent faulty parts entering assembly, reduces rework and supports documentation of inspection routines. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M11×1.5 mm Go Thread Plug Gauge Metric ISO 6H, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a compact, rugged inspection tool that combines M11 x 1.5 thread verification, hardened gauge steel construction and conformity with DIN 13, 6H for consistent Go/No‑Go decisions on the shop floor; order directly via Metav Werkzeuge or consult our specialists for application guidance. Limit thread plug gauge M11 x 1.5 (ISO metric, right-hand) – Metav IndustryLine A Limit thread plug gauge M11 x 1.5 designed for fast Go/No‑Go checks of ISO metric threads in production control and incoming inspection M11 x 1.5 ISO metric thread Right-hand, DIN 13 tolerance 6H Hardened gauge steel for durability Compact weight 0.09 kg for ease of handling Reliable verification for routine inspection The limit plug gauge is tailored to deliver precision where repeatable thread checks are required. Manufactured from hardened gauge steel, the piece resists wear and maintains dimensional stability through repeated engagement, which supports consistent Go/No‑Go assessment in production or receiving departments. Conformance to DIN 13 and the 6H tolerance class provides a clearly defined acceptance criterion for ISO metric threads and helps reduce subjective judgement during manual inspection. Faster process control and fewer rejects Using a dedicated thread gauge shortens inspection time and increases throughput: the compact design and low mass enable quick handling and swift insertion into threaded parts, making batch sampling and spot checks more efficient. This benefit is particularly relevant in assembly and quality assurance, where rapid decisions reduce line stoppages and limit the spread of non‑conforming parts. The robust gauge construction translates into long service life and a lower total cost of ownership compared with disposable or improvised checking methods. Clear technical basis for traceable decisions The tool’s specification—M11 x 1.5, right‑hand thread, produced in gauge steel and hardened to industrial standards—gives a transparent technical basis for inspection records. The simple physical pass/fail nature of the gauge supports straightforward traceability in quality documentation and audit routines. For workshops and production sites seeking dependable tactile verification, this gauge supplies an unambiguous acceptance boundary that complements measurement equipment and enhances overall quality assurance. Choose Metav IndustryLine for dependable thread testing and contact Metav Werkzeuge in Emmerich for procurement advice and rapid supply coordination Technical Data Article number: M315.011 GTIN: 4054469122304 Material: Gauge steel, hardened Thread size: M11 x 1.5 Tolerance / Standard: DIN 13, 6H Weight: 0.09 kg Tariff number: 90173000 ECLASS: 21170235 Facts Thread designation: M11 x 1.5 Hand: Right-hand Weight (kg): 0.09 GTIN numeric: 4054469122304 Tariff number numeric: 90173000 Special features Limit plug gauge for Go/No‑Go checks Hardened construction for wear resistance Conforms to DIN 13 tolerance class 6H Category: Gauges / Measuring pins Condition: Good FAQ What thread size does this gauge verify? The limit plug gauge verifies M11 x 1.5 ISO metric threads and is specified for right‑hand threads. Is the tool suitable for production line checks? Yes, the limit plug gauge M11 x 1.5 from Metav IndustryLine is intended for routine production and incoming inspection checks to provide fast Go/No‑Go decisions. What material is the gauge made from? The gauge is manufactured from hardened gauge steel, chosen for durability and dimensional stability under repeated use. Which standard and tolerance class apply to this gauge? This product is made to DIN 13 and the 6H tolerance class, providing a clear acceptance limit for ISO metric threads. What is the article number or SKU for ordering? The article number is M315.011, which can be used when requesting procurement or technical information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M11×1.5 Thread Go Ring Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Benefit from precise conformity testing, hardened gauge‑steel durability and compact handling for efficient inspection — order the Thread Gauge Ring M11 x 1.5 directly via Metav Werkzeuge or ask our consultants if needed Thread Gauge Ring M11 x 1.5 — Hardened gauge steel, DIN 13 (6g) — Metav IndustryLine The Thread Gauge Ring M11 x 1.5 is a hardened go ring designed for quick verification of metric ISO threads according to DIN 13, 6g, suitable for right‑hand external threads in production and inspection environments DIN 13, tolerance class 6g Hardened gauge steel construction For metric ISO thread M11 x 1.5, right‑hand Lightweight 0.07 kg for convenient handling Ensure conformity with reproducible pass/fail checks Manufactured to DIN 13 and rated at 6g, the ring offers a direct, objective check of external metric threads. As a Go ring, it confirms that a shaft or bolt meets the required major, pitch and effective diameters without elaborate measuring setups. This simple mechanical verification reduces inspection time, lowers the risk of downstream rejects and supports efficient in‑line quality control. The use of an application‑specific gauge removes ambiguity from pass/fail decisions and supports traceable sampling plans in serial production. Robust material and finish for long service life Produced from hardened gauge steel, the component resists wear and preserves the reference profile over extended use. The material choice ensures dimensional stability under normal workshop conditions and maintains the check‑fit characteristics that a reliable gauge must provide. At a weight of 0.07 kg, the ring is easy to handle and position, while the hardened surface reduces the need for frequent replacement, delivering low life‑cycle costs and consistent measurement behaviour across batches. Practical role on the shop floor and in inspection labs The ring is intended for straightforward go/no‑go inspection of metric ISO threads and fits procedures where rapid decisions are required. Use of the ring in routine process checks shortens inspection cycles and supports machine operator acceptance testing as well as final QC sign‑off. The marked right‑hand orientation and the clear designation of M11 x 1.5 simplify inventory and procedural documentation, while the compact format suits tool trolleys or inspection benches where fast access to calibrated gauges is essential. For assured thread conformity and straightforward integration into quality routines, request the Metav IndustryLine Thread Gauge Ring M11 x 1.5 through Metav Werkzeuge — our Emmerich‑based advisors will assist with selection and delivery. Technical data SKU: M315.111 GTIN: 4054469123974 Weight: 0.07 kg Manufacturer: Metav IndustryLine Key measurements Thread nominal: M11 x 1.5 Tolerance class: 6g Standard: DIN 13 Customs tariff number: 90173000 Materials & features Material: Gauge steel, hardened Function: Go (good) ring for external metric ISO threads Handedness: Right‑hand thread compatibility Category: Gauge ring / thread gauge FAQ What is the purpose of this thread gauge ring? The Thread Gauge Ring M11 x 1.5 from Metav IndustryLine provides a rapid go/no‑go check to verify that external metric ISO threads meet the dimensional limits specified by DIN 13 in tolerance class 6g. Can the ring be used in production sampling? Yes, the ring is intended for routine process checks and sampling inspections where a clear pass/fail decision is required, helping to reduce rework and maintain production flow. What material is the gauge made from and why does it matter? The ring is made of hardened gauge steel, which preserves the profile under regular use and extends service life, ensuring repeatable inspection results. Is the gauge suitable for left‑hand threads? This particular ring is designed for right‑hand metric ISO threads; left‑hand applications require a specifically designated left‑hand gauge. Which standard does this gauge comply with? The ring is manufactured to the DIN 13 specification and applies to threads in tolerance class 6g, as stated in the product designation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x1.5 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a workshop-ready solution that combines reliable thread verification, hardened gauge‑steel construction and traceable calibration for consistent inspection results. Order the gauge directly through Metav Werkzeuge or consult the Metav team for application advice. Thread plug gauge GUT M120 x 1.5 — right‑hand, DIN 13 (6H) by Metav IndustryLine Thread plug gauge GUT M120 x 1.5 — a calibrated go gauge for metric fine threads, right‑hand Calibrated with certificate included Hardened gauge steel construction Conforms to DIN 13, 6H standard For M120 x 1.5 fine metric thread Accurate pass/fail control for fine metric threads This thread plug gauge is engineered to provide dependable verification for fine‑pitch metric threads. Manufactured as a GO gauge, it confirms that internal threads meet the required fit and tolerance for an M120 x 1.5 specification and right‑hand orientation. The tool’s conformity to DIN 13 with a 6H tolerance class makes it suitable for standardised quality routines in production and incoming inspection. Delivered with a calibration certificate, the gauge supports traceability and audit requirements while reducing the time spent on manual verification. Robust construction that preserves measurement integrity Constructed from hardened gauge steel, the gauge resists wear and maintains its form under repeated engagement with internal threads. This material choice combines surface hardness with dimensional stability, so pass/fail checks remain consistent over many cycles. The solid build and clear marking facilitate rapid identification on the shop floor, improving inspection throughput and lowering the risk of false rejections. As a GO‑only plug, it is intended to confirm acceptability rather than provide a measurement value, which streamlines process checks where quick decisions are essential. Traceability and workshop integration for quality assurance The supplied calibration certificate documents the gauge’s conformity at the time of delivery and supports quality systems that require documented evidence of tool status. Integration into a calibrated tool inventory ensures that thread inspections are reproducible and that corrective actions can be traced back to instrument condition. The design is optimised for routine use in machine shops, toolrooms and quality departments where standardised gauges are preferred for efficient, repeatable assessment of internal metric threads. For traceable, production‑grade thread verification, request the Metav IndustryLine GO plug gauge M315.520.6 via Metav Werkzeuge — the Metav consultants in Emmerich will advise on suitability and delivery options. Technical Data Article number: M315.520.6 GTIN: 4054469152066 Label: Gewinde‑Lehrdorn GUT M 120 X 1,5 für metrisches ISO‑Feingewinde, rechts Brand: Metav IndustryLine Facts Size: M120 x 1.5 Weight: 2.2 kg Tariff code: 90173000 Special features GO gauge (GUT) Right‑hand thread Hardened gauge steel Conforms to DIN 13, 6H Delivered with calibration certificate FAQ What does GUT mean for the thread plug gauge? GUT denotes a GO plug gauge: the Metav IndustryLine thread plug gauge M120 x 1.5 is intended to confirm that internal threads meet the pass criteria for the specified tolerance class. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate documenting its status at delivery and enabling traceability in quality systems. Which standard does the gauge comply with? The plug gauge is manufactured to conform with DIN 13 and the 6H tolerance class, ensuring compatibility with commonly used metric thread specifications. Can this gauge be used for left‑hand threads? This particular item is a right‑hand GO plug designed for M120 x 1.5 metric fine threads; left‑hand versions require a separate specification. What material is the plug gauge made from? The gauge is made from hardened gauge steel, chosen for durability and dimensional stability under repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x1.5 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and an included calibration certificate to secure repeatable thread checks to DIN 13, 6g; the GO ring design for M120 × 1.5 right‑hand threads supports fast in‑line inspection and reliable pass/no‑go decisions. Order the gauge via Metav Werkzeuge or consult the Metav team for application advice. Go thread ring gauge M120 × 1.5 — Metric ISO fine thread gauge, right‑hand (Metav IndustryLine) Go thread ring gauge M120 × 1.5 for production and inspection tasks; checks conformity to DIN 13 (6g) for right‑hand metric fine threads Hardened gauge steel construction Calibrated with certificate included Conforms to DIN 13, 6g tolerance Right‑hand M120 × 1.5 fine thread Reliable pass/no‑go assessment for production control The GO ring gauge is designed as a simple, robust check for thread conformity: the GO profile must enter the part if the thread meets specification. Constructed from hardened gauge steel, the tool resists wear and preserves gauge form over repeated cycles, which reduces retesting and downtime. The clear GO/NO‑GO philosophy accelerates in‑process inspection, enabling quality engineers to identify deviations without complex measuring setups. Traceable calibration for quality assurance Delivered with a calibration certificate, the ring comes ready for use in quality systems that require documented traceability. The certificate confirms the gauge performance against reference standards and supports audit requirements. Because the gauge is supplied calibrated, process planners can integrate it directly into inspection procedures, shortening the lead time between receipt and productive use while maintaining documented evidence for compliance. Practical design that suits workshop and shop‑floor use The ring’s geometry and materials are selected for repeatable handling and long service life. The right‑hand M120 × 1.5 pitch is specified for fine‑threaded components commonly found in mechanical assemblies; the GO ring simplifies the verification of internal and external mating parts. The compact handling and clear GO check reduce operator uncertainty and improve throughput in both small batch and serial production environments. Built to standards, designed for confidence Conformance to DIN 13, 6g ensures the gauge applies industry‑recognised tolerances for metric fine threads, offering confidence when certifying threaded components for assembly. The hardened construction maintains dimensional stability, supporting consistent results even under frequent shop‑floor use. For operations that rely on dependable inspection tools, this gauge delivers a pragmatic combination of precision and durability. Contact Metav Werkzeuge for application guidance and secure this Metav IndustryLine Go ring gauge with calibration certificate to bolster thread inspection routines at your facility Technical Data SKU: M315.720.6 GTIN: 4054469152547 Weight: 2.2 kg Manufacturer: Metav IndustryLine Facts Diameter: 120 mm Pitch: 1.5 mm Tariff code: 90173000 Tolerance class: 6g Special features Go ring gauge for metric ISO fine thread Right‑hand thread Calibrated; calibration certificate included Material: hardened gauge steel Conforms to DIN 13, 6g FAQ What is the intended use of this ring gauge? The ring gauge is intended for quick pass/no‑go checks of right‑hand M120 × 1.5 metric fine threads and is used in production and inspection to confirm conformity to DIN 13, 6g. Is the gauge supplied with calibration documentation? Yes, the Metav IndustryLine Go ring gauge is delivered with a calibration certificate, providing traceability and documentation for quality systems. What material is the gauge made from and why? The gauge is manufactured from hardened gauge steel to ensure wear resistance and long‑term dimensional stability under frequent use. Can this gauge be used for audit purposes? Yes, with the supplied calibration certificate and conformity to DIN 13, 6g, the gauge supports audit requirements and documented quality assurance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x1.5 Thread Ring Gauge, Go/No-Go, DIN 13 6g, Hardened Gauge Steel, Calibrated Certificate - Metav IndustryLine
Take advantage of a NO‑GO thread ring that combines hardened gauge steel construction with traceable calibration — ideal for definitive go/no‑go decisions on metric fine threads. The gauge’s conformity to DIN 13, 6g and its M120 x 1.5 sizing make it suitable for robust quality control processes; order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge NO‑GO M120 x 1.5 — Right‑hand, DIN 13 (6g) — Metav IndustryLine A thread ring gauge NO‑GO M120 x 1.5 engineered for right‑hand metric ISO fine threads, intended for decisive pass/fail inspection in production and incoming goods. Calibrated with certificate Hardened gauge steel construction DIN 13, 6g tolerance class Right‑hand metric fine thread inspection Assured pass/fail inspection for production control A dedicated NO‑GO ring simplifies the final check in a go/no‑go sequence: where a GO gauge confirms acceptance, the NO‑GO component verifies that thread form and pitch do not exceed tolerance limits. Constructed from hardened gauge steel, this ring provides a rigid contact surface that resists wear and ensures consistent results over repeated use. Conformity with DIN 13, 6g defines the tolerance band for metric fine threads and supports objective decisions in quality control, reducing subjective judgements and rework. Durable design for repeatable measurements The geometry and heat treatment of the ring are selected to maintain form under workshop conditions, so measurements remain reproducible even after intensive use. The robust build and the relatively high mass ensure stable handling and minimise the risk of accidental distortion during inspection. As a result, the gauge contributes to fewer false rejects and steadier production flow when integrated into routine checks on fasteners, housings and turned components. Traceable calibration to support quality systems Delivered with a calibration certificate, the gauge can be incorporated into controlled inspection chains and traceability records. The supplied certificate documents the measured conformity of the thread profile and supports evidence-based audits and supplier acceptance procedures. Traceability and documented calibration help align measurement activities with internal quality plans and external standards, reinforcing confidence in inspection outcomes. Practical application and workflow benefits In practice, the ring is used at incoming goods, final inspection and sample checks on the shopfloor. Its clear GO/NO‑GO function speeds decision‑making and reduces measurement time compared with full-form measurement methods. The gauge is particularly useful in repetitive production environments where quick, unambiguous checks prevent downstream assembly issues. Integration into a standard inspection routine reduces downtime and supports consistent product quality across batches. Contact Metav Werkzeuge for detailed delivery options and to discuss how this NO‑GO thread ring fits existing inspection routines — direct dispatch from Emmerich and expert advice available from our consultants Technical data Article number: M315.820.6 GTIN: 4054469152783 SKU: M315.820.6 Core specifications Size: M120 x 1.5 Weight: 2.2 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Thread standard: DIN 13, 6g Right‑hand thread NO‑GO (ausschuss) ring Delivered with calibration certificate (mit Kalibrierschein) FAQ What is the intended use of this ring gauge? The ring is intended as a NO‑GO inspection gauge for right‑hand M120 x 1.5 metric ISO fine threads to support go/no‑go quality control in production and incoming inspection. Does the gauge come with calibration documentation? Yes, the ring is supplied with a calibration certificate, documenting measured conformity for traceability and audit purposes. Which standard does the gauge comply with? The gauge is manufactured to the DIN 13, 6g tolerance class specified for metric fine threads. What material and treatment are used for the ring? The ring is made from hardened gauge steel, chosen for wear resistance and dimensional stability under repeated inspection cycles. Is this a GO or NO‑GO gauge? This specific item is a NO‑GO (ausschuss) ring intended to identify threads that exceed the permissible tolerance. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x2 Thread Gauge Go/No-Go Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Combine robust, hardened construction with traceable calibration to ensure reliable rejection control on threaded parts; the DIN 13 (6g) tolerance and supplied calibration certificate support reproducible inspection decisions. Order the No‑Go thread ring gauge directly via Metav Werkzeuge or consult our measurement specialists for application advice. No‑Go thread ring gauge M120 x 2.0 — right‑hand, DIN 13 (6g) by Metav IndustryLine The No‑Go thread ring gauge M120 x 2.0 is a right‑hand metric ISO fine‑thread inspection gauge designed for production quality control and pass/reject verification of external threads. Hardened gauge steel construction DIN 13, tolerance class 6g Calibration certificate included M120 x 2.0 right‑hand thread Consistent reject detection for threaded production A dedicated No‑Go ring gauge delivers an unambiguous inspection result: if the ring does not pass, the external thread exceeds allowable dimensions and must be rejected or reworked. Made from hardened gauge steel, the device maintains form stability across repeated use, reducing measurement drift and the need for frequent replacement. Compliance with DIN 13 and 6g tolerance class ensures the gauge matches the common acceptance criteria for metric fine threads in mechanical engineering, creating a reliable gatekeeper in the production line. Durable build and traceable measurement assurance The hardened material and conservative design prioritise longevity and repeatable outcomes. The supplied calibration certificate documents the gauge status at delivery, enabling traceability for quality audits and internal inspection records. Using a calibrated reference ring minimises cross‑operator variance in go/no‑go testing and supports faster decision cycles on the shop floor, improving throughput while safeguarding thread quality. Practical workflow integration and inspection benefits Integration into a control routine is straightforward: the ring gauge is used as a binary control for external threads — pass (Go) and fail (No‑Go) criteria are quick to apply, so inspection time per part is kept to a minimum. The robust construction and standardised interface suit repetitive, high‑volume checks typical in component manufacturing and assembly operations. For occasional documentation or audit requirements, the calibration paperwork supplied with the gauge provides immediate proof of conformity at the time of dispatch. Contact Metav Werkzeuge in Emmerich for tailored advice on adopting the No‑Go thread ring gauge M120 x 2.0 into existing inspection routines or to arrange procurement through our European distribution centre Technical data Article number: M315.820.7 GTIN: 4054469153827 Designation: No‑Go thread ring gauge M120 x 2.0 Material: gauge steel, hardened Standard: DIN 13, 6g Weight: 2.2 kg Facts Thread size: M120 x 2.0 Tariff number: 90173000 Right‑hand thread Special features No‑Go (reject) function for external threads Supplied with calibration certificate Hardened gauge steel construction FAQ What is the primary use of this ring gauge? The No‑Go thread ring gauge M120 x 2.0 is intended for quick pass/fail inspection of external metric ISO fine threads to identify parts that must be rejected or reworked. Does the gauge arrive calibrated? Yes, the ring gauge is supplied with a calibration certificate confirming its measured condition at delivery. Which standard does this gauge follow? The gauge conforms to DIN 13 with tolerance class 6g, matching common acceptance criteria for metric fine threads. Is this a Go or No‑Go gauge? This specific item is a No‑Go (reject) ring gauge for M120 x 2.0 right‑hand threads; it is used to verify that external threads do not exceed the upper limit. Who supplies and distributes this product? The product is offered by Metav IndustryLine; the SKU is M315.820.7 and distribution is handled via Metav Werkzeuge for European customers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x2 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Reliable thread inspection and clear go/no-go decisions backed by hardened gauge steel and the DIN 13, 6H specification; supplied with a calibration certificate for immediate traceability. Benefit from a durable metric fine-thread master that reduces rework and speeds up quality checks — order directly via Metav Werkzeuge or contact our consultants for tailored advice. Go thread plug gauge M120×2.0 — Metric ISO fine thread, right-hand (Metav IndustryLine) The Go thread plug gauge M120×2.0 is designed for rapid inspection of internal metric fine threads in production and quality control environments Supplied with calibration certificate DIN 13 tolerance class 6H Hardened gauge steel construction Right-hand metric fine thread M120×2.0 Quick and reliable go/no-go control for threaded bores A dedicated Go plug gauge provides an immediate binary check for internal threads: acceptance or rejection. The M120×2.0 size conforms to DIN 13, 6H, so the gauge assesses compliance with the official metric fine-thread tolerances used across mechanical engineering and component manufacture. Supplied with a calibration certificate, the gauge offers documented accuracy and traceability, enabling production lines and inspection stations to make fast decisions that cut down on measurement time and downstream rework. Durable materials and measurable repeatability Manufactured from hardened gauge steel, the inspection mandrel resists wear and preserves its measuring edges under frequent use, extending service life and reducing total cost of ownership. The robust construction ensures geometric stability during repeated engagement with threaded bores, which improves repeatability of go/no-go checks. Combined with the traceable calibration, the result is a tool that supports consistent process capability assessments and reliable acceptance criteria in serial production. Easy integration into quality workflows The plug gauge is a compact, operation‑ready instrument that fits inspection benches and final testing rigs. As a simple tactile gauge it requires minimal training to operate while delivering clear, reproducible results that feed into quality data logs or visual acceptance routines. For audits and internal documentation the accompanying calibration certificate demonstrates conformity and aids in supplier control and incoming inspection procedures, supporting both daily shop‑floor needs and formal quality systems. For procurement or technical clarification regarding the Metav IndustryLine M120×2.0 Go plug gauge, please contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com — our team will advise on availability and calibration options. Technical data Article number: M315.520.7 GTIN: 4054469153025 ECLASS: 21170228 Facts Weight: 2.2 kg Thread size: M120×2.0 Thread direction: right-hand Customs tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, 6H Supplied with calibration certificate FAQ What is the primary purpose of this gauge? The gauge is a Go plug gauge for quick go/no-go verification of internal metric fine threads; the Metav IndustryLine Go thread plug gauge M120×2.0 (SKU M315.520.7) confirms whether an internal thread meets DIN 13, 6H acceptance limits. Is a calibration certificate included? Yes, the gauge is supplied with a calibration certificate that documents its measured conformity and traceability, enabling straightforward integration into quality records. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the plug gauge is wear-resistant and designed for repeated use in production and inspection environments. Can this gauge be used for left-hand threads? No, this particular mandrel is manufactured for right-hand threads only; it is specified for right-hand metric fine threads M120×2.0. How should inspection results be interpreted with this plug gauge? If the Go gauge enters the internal thread without force, the thread meets the Go acceptance criterion; if it does not enter, the part requires rejection or rework according to the applicable inspection plan. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x2 Thread Go/No-Go Plug Gauge, ISO Metric Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, conformity to DIN 13 (6H) and the included calibration certificate to ensure repeatable rejection testing and reduced scrap rates on metric fine threads. Order the gauge directly via Metav Werkzeuge or consult the team for application-specific advice. Thread plug gauge M120 x 2.0 — No‑Go gauge, DIN 13 (6H) — Metav IndustryLine The thread plug gauge M 120 x 2.0 is a right‑hand no‑go (reject) gauge for verification of metric ISO fine threads in production and incoming inspection, designed for fast go/no‑go checks on large threaded components Hardened gauge steel construction Conforms to DIN 13, tolerance grade 6H Supplied with calibration certificate Fast, reliable rejection control to protect assembly quality The no‑go plug serves as a simple, highly reliable control point in production lines and inspection benches. Built to check the upper limit of acceptable thread size, the gauge identifies oversize or damaged threads instantly, helping to prevent assembly failures and reduce rework. Because the item is a dedicated no‑go gauge made from hardened gauge steel, tactile inspection is immediate and reproducible, making it suitable for repetitive checks on large parts where speed and certainty are vital. Robust construction engineered for workshop environments Manufactured in hardened gauge steel and finished to workshop tolerances, the gauge withstands frequent handling and the mechanical stresses of busy inspection routines. The right‑hand configuration and the M120 x 2.0 thread form match standard metric ISO fine threads, ensuring compatibility with common component programmes. The physical robustness reduces the need for frequent replacement, while the compact design minimises handling time during checks on bearings, housings or large fastened assemblies. Traceable calibration that supports quality systems Delivered with a calibration certificate, the gauge provides documented traceability for quality management and audit trails. The certificate confirms the inspection status at delivery and supports routine quality assurance procedures; this simplifies integration into ISO‑based workflows or internal inspection protocols. Calibrated test gauges like this directly aid in maintaining process capability and demonstrating control during supplier or production audits. For technical advice, ordering information or application support for the Metav IndustryLine thread plug gauge, contact Metav Werkzeuge in Emmerich for tailored guidance and reliable delivery. Technical data Article number: M315.620.7 GTIN: 4054469153230 Thread: M120 x 2.0 Material: Gauge steel, hardened Standard: DIN 13, 6H Weight: 2.2 kg Tariff number: 90173000 Facts Thread size: M120 × 2.0 Tolerance class: 6H Weight: 2.2 kg Special features No‑go (reject) thread plug gauge Right‑hand thread Supplied with calibration certificate Suitable for metric ISO fine threads Robust workshop design FAQ What is the intended purpose of this gauge? The thread plug gauge is a dedicated no‑go plug intended to verify that metric ISO fine threads (M120 × 2.0) do not exceed acceptable limits; the tool identifies oversized or damaged threads that should be rejected. Is the gauge supplied calibrated? Yes, the gauge is supplied with a calibration certificate confirming its inspection status at delivery and enabling immediate use within documented quality processes. Which standard does the gauge comply with? The gauge is manufactured to DIN 13, tolerance class 6H, matching standard metric ISO fine thread specifications for measurement and acceptance checks. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the plug gauge is designed for durable use in workshop and inspection environments, with mechanical resistance to frequent handling. How should the no‑go gauge be applied in inspection routines? Use the no‑go plug to attempt engagement with the component thread; inability to fully screw‑in indicates acceptable size, while full engagement signals an oversize or faulty thread requiring rejection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x2 Thread Ring Gauge Metric ISO Fine Right-Handed Hardened Gauge DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and conformity to DIN 13, 6g for reliable thread acceptance testing; the unit is delivered with a calibration certificate for traceable quality control. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for technical advice. Thread ring gauge M120 × 2.0 — GO gauge for metric ISO fine threads (right-hand) The thread ring gauge M120 × 2.0 is a precision go ring gauge for right‑hand metric ISO fine threads, designed for routine pass‑fail inspection in production and quality control environments Calibrated with traceable certificate Hardened gauge steel for lasting accuracy Conforms to DIN 13, tolerance 6g For M120 × 2.0 metric fine thread, right-hand Reliable inspection results that speed up quality control The ring gauge provides a clear, objective pass result for external threads, reducing subjective interpretation on the shop floor. By matching the DIN 13, 6g tolerance class, the gauge supports standardised acceptance criteria for metric ISO fine threads, so compliant parts are identified rapidly. Delivered with a calibration certificate, the tool ensures documented traceability for audits and quality records, which helps to maintain process stability and simplifies conformity checks during incoming inspection and pre‑shipment control. Built for repeatability and low maintenance Constructed from hardened gauge steel, the gauge resists wear and keeps its profile under frequent use, which extends service life and reduces replacement costs. The robust geometry of the ring maintains dimensional fidelity even under shop‑floor handling, so repeatability of inspection remains high across shifts. With a compact, single‑purpose design, this gauge integrates into standard inspection jigs and works efficiently alongside visual checks and process control routines, delivering dependable results with minimal maintenance down time. Practical guidance for everyday thread verification Use the ring gauge as a quick go/no‑go check: the go gauge (this item) must assemble smoothly onto the external thread without excessive force, confirming conformity to the M120 × 2.0 specification for right‑hand metric fine threads. For systematic quality programmes, record the calibration data supplied with the instrument and include the gauge in regular verification intervals to uphold measurement integrity. Its straightforward operation makes it suitable for production operators and quality technicians who require a fast, repeatable method for thread acceptance. For assured thread control and documented accuracy, request the Metav IndustryLine go ring gauge M120 × 2.0 (Article No. M315.720.7) from Metav Werkzeuge — our Emmerich team can advise on suitability and delivery. Technical data Article number: M315.720.7 GTIN: 4054469153612 Designation: Thread ring gauge M120 × 2.0, right-hand Weight: 2.2 kg Manufacturer: Metav IndustryLine Facts Size: M120 × 2.0 Standard: DIN 13, 6g Type: Go ring gauge (GUT) Material: Hardened gauge steel Category: Gauges / Thread inspection Special features Delivered with calibration certificate Right‑hand metric ISO fine thread Suitable for routine inspection and quality control Durable, wear‑resistant construction FAQ What does "GUT" indicate on this gauge? "GUT" corresponds to the "go" function: the ring gauge verifies that an external thread meets the acceptance limit. The thread ring gauge M120 × 2.0 (Metav IndustryLine, Article No. M315.720.7) is a go gauge for quick pass checks. Is a calibration certificate included with the gauge? Yes. The unit is supplied with a calibration certificate to document the verification status and to support traceability in quality systems. Which tolerance class does this gauge check against? The instrument checks threads to the DIN 13, 6g tolerance class for metric ISO fine threads, suitable for standard production control. Can this gauge be used on left‑hand threads? No. This ring gauge is intended for right‑hand metric ISO fine threads only; left‑hand threads require the corresponding left‑hand gauge. How should the gauge be used to avoid damage? Fit the gauge onto the external thread with steady, light pressure; avoid hammering or forced assembly. Keep the tool clean and store it protected after use, and follow the calibration interval recorded on the supplied certificate. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x3 Thread Go Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of the combination of traceable calibration, hardened gauge‑steel durability and DIN‑compliant tolerancing for reliable thread inspection in production. Order the gauge directly via Metav Werkzeuge or consult our specialists for integration advice. Thread plug gauge M120 x 3.0 — plug gauge for metric ISO fine thread, DIN 13, right‑hand (Metav IndustryLine) The thread plug gauge M120 x 3.0 is a hardened plug gauge designed to verify metric ISO fine external threads (right‑hand) to DIN 13 tolerance class 6H, supplied with a traceable calibration certificate for immediate use in quality control. Hardened gauge steel construction DIN 13 tolerance class 6H Includes calibration certificate Metric M120 x 3.0, right‑hand thread Precise verification that fits production control A dedicated plug gauge provides an unequivocal go/no‑go decision for threaded parts. Manufactured from hardened gauge steel, this gauge holds shape under repeated use, so inspection results remain consistent. The DIN 13 specification with tolerance 6H defines the acceptance envelope, enabling straightforward comparison against the drawing specification. Supplied with a calibration certificate, the gauge supports traceability and documentation in audit processes. Faster inspection, less rework Integrating a calibrated thread master into routine checks reduces uncertainty at the machine and on the inspection bench. The compact, robust design of this gauge shortens handling time during sampling and speeds up acceptance cycles, helping to lower throughput delays and reduce scrap rates. The right‑hand, fine‑pitch profile M120 x 3.0 is tailored for medium‑large assemblies where accurate thread control prevents assembly failures and improves overall process efficiency. Durable tool life and straightforward care Constructed from hardened gauge steel and finished for repeatable contact, the gauge resists wear and maintains its measuring edge across many inspection cycles. Weight and balance provide stable handling during manual checking; regular cleaning and storage in a dry environment prolong service life. For traceable measurement records, retain the enclosed calibration certificate with the quality documentation. For calibrated, production‑ready gauges from Metav IndustryLine, contact Metav Werkzeuge to discuss supply and specification matching or to order the thread plug gauge M120 x 3.0 with certificate. Technical data Article number: M315.620.8 GTIN: 4054469154213 Weight: 2.2 kg Material: Hardened gauge steel Thread size: M120 x 3.0 Standard: DIN 13, 6H Tariff code: 90173000 Facts Mass / thread: M120x3 Weight in kg: 2.2 eClass: 21170228 SKU: M315.620.8 Special features Includes calibration certificate Right‑hand metric ISO fine thread Role in acceptance/rejection checks indicated by "AUSSCHUSS" Category: Gauges / Thread gauges FAQ What is this gauge used for? The thread plug gauge M120 x 3.0 by Metav IndustryLine is intended for functional inspection of metric ISO fine external threads, providing a clear go/no‑go result for production quality checks. Which standard and tolerance does the gauge conform to? The gauge conforms to DIN 13 with tolerance class 6H, enabling comparison to standard metric ISO fine‑thread specifications. Is calibration included with delivery? Yes, the gauge is supplied with a calibration certificate, allowing immediate use in documented inspection routines and supporting traceability. What material is the gauge made from and how durable is it? Manufactured from hardened gauge steel, the gauge is designed for durability and repeatable contact over many inspection cycles. Can this gauge be used for left‑hand threads? No, this specific item is a right‑hand thread plug gauge; left‑hand variants must be selected separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x3 Thread Go Ring Gauge Metric ISO Fine Right-Handed Hardened Gauge, DIN 13 6g, Calibrated - Metav IndustryLine
Take advantage of hardened gauge steel, proven DIN 13 tolerances and an included calibration certificate for reliable pass/fail inspection on fine metric threads; order the ring gauge directly via Metav Werkzeuge or consult our specialists for integration into inspection routines. Go ring gauge M120 x 3.0 — Metric ISO fine thread, right-hand, Metav IndustryLine A precision Go ring gauge for verifying external threads to metric ISO fine-thread dimensions, suitable for production control and incoming inspection of right-hand threads Go ring gauge for M120 x 3.0 metric threads Hardened gauge steel for long-term stability Manufactured to DIN 13, tolerance class 6g Delivered with calibration certificate Assured conformity for production and inspection The Go ring gauge M120 x 3.0 is designed to provide a fast, unambiguous acceptance check for external threads. Manufactured from hardened gauge steel, the gauge delivers consistent dimensional stability under repeated use, which reduces measurement scatter and protects assembly processes from non-conforming parts. Conformity with DIN 13 and tolerance class 6g ensures compatibility with common ISO thread specifications; this makes the gauge a straightforward tool for quality gates where throughput and traceability are equally important. The inclusion of a calibration certificate documents initial accuracy and supports quality records during audits. Durable construction that lowers maintenance effort Robust material selection and heat treatment contribute to wear resistance and sustained functional life. The hardened gauge steel body resists profile wear and maintains the critical thread form, so replacement intervals are extended and maintenance costs fall. A solid mass contributes to stable handling during gauging operations, while precisely machined thread flanks preserve the fit that defines a true “Go” condition. Using a dedicated ring gauge for go/no-go decisions simplifies operator tasks and minimises subjective judgement in routine checks, which helps to keep production moving without unnecessary stoppages. Practical application and traceable quality assurance This ring gauge is suitable for use in incoming inspection, in-process checks and final acceptance where M120 x 3.0 fine threads are specified. In practice, a part that screws freely onto the gauge under hand force meets the defined maximum-material requirements and is accepted; parts that do not engage indicate an out-of-tolerance condition requiring corrective action. Documentation supplied with the gauge — including the calibration paperwork — supports traceability in quality management systems and provides evidence of measurement capability during supplier or customer audits. The compact, dedicated design makes the gauge easy to integrate into test benches or manual inspection stations. Contact Metav Werkzeuge to discuss the integration of this M120 x 3.0 Go ring gauge into existing inspection routines and to secure a calibrated unit with traceable documentation. Technical Data Article number: M315.720.8 GTIN: 4054469154404 Weight: 2.2 kg Thread size: M120 x 3.0 Material: gauge steel, hardened Standard: DIN 13, 6g Facts Tariff number: 90173000 Right-hand thread Special features Go ring gauge (GUT) for metric ISO fine thread Delivered with calibration certificate Suitable for production and incoming inspection Solid, wear-resistant construction FAQ What does a Go ring gauge check? A Go ring gauge verifies that an external thread meets the maximum-material condition for fit and can be easily engaged; the Go ring gauge M120 x 3.0 confirms whether a threaded part is within the allowable limits for assembly. Is a calibration certificate included with the gauge? Yes, the ring gauge is delivered with a calibration certificate, which documents the initial verification of dimensions and supports quality system traceability. To which standard is the gauge manufactured? The gauge is manufactured to DIN 13 and follows the 6g tolerance class as specified for metric ISO threads. Can this gauge be used on production lines? The M120 x 3.0 Go ring gauge is designed for in-process and incoming inspection; its robust construction and clear go/no-go function make it suitable for manual inspection stations and integration into production quality checkpoints. How should the gauge be stored to preserve accuracy? Store the gauge clean, dry and protected from impacts; keep the calibration paperwork with the gauge and avoid exposure to corrosive environments to maintain dimensional stability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x3 Thread Plug Gauge Go/No-Go For ISO Metric Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g, With Calibration Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel construction, DIN 13 tolerance 6g and a supplied calibration certificate for reproducible rejection testing; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge AUSSCHUSS M120 × 3.0 — Metric ISO fine thread, right-hand (Metav IndustryLine) Thread ring gauge AUSSCHUSS M120 × 3.0 is a hardened inspection gauge for verifying metric ISO fine threads (right-hand) used in workshop and production quality control. Hardened gauge steel construction Conforms to DIN 13, 6g tolerance For metric ISO fine thread M120×3, right-hand Delivered with calibration certificate Ensure rejects are detected reliably on the production line The AUSSCHUSS designation identifies this item as a no‑go (reject) ring, designed to catch parts that exceed allowable thread limits before they reach assembly. By using a dedicated reject gauge for M120×3 metric fine threads the inspection step becomes an objective, fast decision point: parts that pass the go gauge and fail the no‑go gauge remain within specification, while any entry into the no‑go ring is instantly flagged for rework or scrapping. This reduces downstream rework, limits production downtime and tightens overall process control. Traceability and standards that support quality systems Manufactured from hardened gauge steel and produced to DIN 13 with the 6g tolerance class, the ring comes with a calibration certificate, providing documented traceability for internal audits and supplier qualification. The supplied certificate confirms the measured dimensions and the inspection status at delivery, supporting quality records and enabling straightforward integration into inspection routines without additional immediate recalibration. The combination of recognised standard compliance and a formal calibration document strengthens acceptance in regulated manufacturing environments. Robust construction for repeated use in workshop and inspection The ring gauge’s material and heat treatment ensure dimensional stability and abrasion resistance under regular handling. For larger diameters such as M120×3, a substantial construction prevents distortion during use, maintaining repeatability over many cycles and supporting consistent measurement outcomes. Where thread interfaces are critical, this durable design contributes directly to fewer false rejects and a longer service life of the gauge, which in turn reduces total cost of ownership in production and inspection tasks. For specification confirmation or to arrange supply of the Metav IndustryLine thread ring gauge, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss availability and delivery options Technical data SKU: M315.820.8 GTIN: 4054469154596 Designation: Thread ring gauge AUSSCHUSS M120 × 3.0 (right‑hand) Facts Thread size: M120 × 3 Tolerance class: 6g (DIN 13) Weight: 2.2 kg Tariff number: 90173000 Special features Material: hardened gauge steel Right‑hand metric ISO fine thread application Delivered with calibration certificate AUSSCHUSS = no‑go / reject ring for production control FAQ What does AUSSCHUSS mean for this ring gauge? AUSSCHUSS denotes a no‑go or reject ring; the Thread ring gauge AUSSCHUSS M120 × 3.0 is intended to detect threads that exceed permissible limits and therefore should be rejected. Is the gauge ready for immediate use in a quality system? Yes, the ring gauge is supplied with a calibration certificate, allowing the gauge to be incorporated into inspection plans and quality records on delivery. Which standard and tolerance does the gauge follow? The gauge is manufactured to DIN 13 and specified for the 6g tolerance class, suitable for metric ISO fine thread verification of M120 × 3. Can this gauge be used on left‑hand threads? No, this specific ring is a right‑hand thread gauge; left‑hand thread inspection requires the corresponding left‑hand gauge. How does the material affect performance in daily use? Made from hardened gauge steel, the ring offers high wear resistance and dimensional stability, supporting reproducible inspection results across many cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x4 Go/No-Go Thread Ring Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g, With Calibration Certificate - Metav IndustryLine
Hardened gauge steel, DIN 13 (6g) tolerance and a traceable calibration certificate combine to provide a robust verification solution for M120 × 4 metric fine threads; ideal where documented measurement evidence is required. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for guidance. Thread ring gauge (scrap) M120 x 4 for metric ISO fine thread, right-hand — Metav IndustryLine The Thread ring gauge M120 x 4 is a hardened verification tool for external metric ISO fine threads, intended for right‑hand parts and workshop inspection tasks. M120 x 4 metric ISO fine thread Hardened gauge steel construction Right-hand thread verification Includes traceable calibration certificate Measured reliability for metric fine threads A ring gauge of this size offers a straightforward method to verify external threads against the DIN 13 (6g) tolerance band. Machined from hardened gauge steel, the item provides wear resistance and a stable reference surface for pass/fail checks on turned or rolled threads. The nominal size M120 x 4 designates a fine‑pitch metric thread where dimensional control of pitch and major diameter is essential; using a calibrated ring gauge minimises ambiguous judgements during inspection and speeds up throughput in series production. Practical inspection use and handling benefits As a right‑hand thread verifier, the ring gauge serves as a tactile, no-electronics inspection device suitable for the shop floor and incoming goods control. The simple go/no‑go principle enables rapid decisions without extensive setup, reducing cycle time in quality control routines. The hardened material and precise manufacturing deliver repeatable results over many cycles, lowering the need for frequent replacement and supporting consistent production quality. Traceability, documentation and procurement confidence Delivery includes a calibration certificate, ensuring traceability of the measurement to recognised standards and allowing documentation to be filed with quality records. The item is classified as scrap in the listing, which should be taken into account when specifying critical inspection tools; nonetheless, the supplied documentation maintains the traceable chain of custody required for audit purposes. Metav IndustryLine’s presence in Emmerich underpins reliable stock management and an industrially experienced distribution channel for precision tools. Contact Metav Werkzeuge in Emmerich to confirm suitability and availability of the hardened M120 x 4 thread ring gauge (SKU M315.820.9) and to request the included calibration certificate Technical data SKU: M315.820.9 GTIN: 4054469155319 Size: M120 x 4 Thread type: Metric ISO fine, right-hand Material: hardened gauge steel Standard: DIN 13 (6g) Calibration: calibration certificate included Weight: 2.2 kg Tariff number: 90173000 Status: classified as scrap Measurements / Weight Mass / nominal size: M120 x 4 Weight: 2.2 kg Features / Applications Hardened gauge steel construction Verification tool for external threads Supplied with calibration certificate for traceability Compliance reference: DIN 13 (6g) Category: gauges / thread verification FAQ What does the designation 'scrap' mean for this ring gauge? The designation indicates the item is listed as scrap; the ring gauge M120 x 4 remains a functional verification tool but the classification should be considered when selecting precision equipment for critical acceptance criteria. Can this ring gauge be used for inspecting external threads on production parts? Yes, the Metav IndustryLine thread ring gauge M120 x 4 is intended for verification of external metric ISO fine threads and supports rapid go/no‑go checks in production and incoming inspection. Is a calibration certificate provided with delivery? Yes, the M120 x 4 ring gauge is supplied with a calibration certificate, ensuring traceability of the measurement results for documentation and audit purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x4 Thread Gauge Plug For Metric ISO Fine Thread, Right-Handed, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise metric thread verification with a hardened gauge that meets DIN tolerance class and arrives with a calibration certificate; minimise rework and secure assembly conformity by ordering directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M120 x 4.0 – Metric ISO fine thread, right-hand (DIN 13, 6H) — Metav IndustryLine A thread plug gauge GUT M120 x 4.0 for straightforward Go/No‑Go checks of metric ISO fine threads in production and inspection environments. Hardened gauge steel construction DIN 13 tolerance class 6H Included calibration certificate Designed for M120 x 4.0 fine threads Reliable Go/No‑Go verification for production A dedicated thread plug gauge provides a fast, objective check of internal threads without time‑consuming measurements. The M120 x 4.0 geometry, manufactured to DIN 13 and class 6H, ensures compatibility with standard metric fine‑thread specifications. Used as a Go/No‑Go tool, the gauge confirms functional fit and thread form rapidly; this reduces the need for destructive inspection and lowers the risk of assembly failures, thereby supporting uninterrupted production flow. Engineered for measurement stability and traceability Manufactured from hardened gauge steel, the plug gauge resists wear and preserves critical thread profiles over extended cycles. Delivery includes a calibration certificate, providing documented traceability for quality records and incoming inspection protocols. These attributes combine to offer consistent pass/fail decisions, minimise measurement drift and support audit requirements. The robust construction and clear conformity to standards help maintain production tolerances and reduce scrap rates. Application scenarios and handling benefits The gauge suits workshop and quality departments tasked with verifying fine internal threads on components, housings and fastened assemblies. As a right‑hand plug gauge, it is intended for verification of right‑hand metric threads and is especially useful where rapid Go/No‑Go assessment is preferred to time‑consuming dimensional checks. The solid build (approx. 2.2 kg) provides tactile stability during use; when stored and handled correctly the gauge maintains its accuracy and service life, contributing to reliable batch acceptance and fewer downstream defects. Specify the Metav IndustryLine GUT M120 x 4.0 (SKU M315.520.9) when placing orders with Metav Werkzeuge to ensure consistent metric thread verification; for tailored advice or application support contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.520.9 GTIN: 4054469154770 Weight: 2.2 kg Facts Thread size: M120 x 4.0 Tolerance / Norm: DIN 13, 6H Direction: Right-hand Special features Material: hardened gauge steel Calibration: included certificate Tariff number: 90173000 FAQ Is the thread plug gauge delivered calibrated? Yes. The thread plug gauge GUT M120 x 4.0 is supplied with a calibration certificate that documents the inspection and supports traceability. To which standard does this gauge conform? The gauge is manufactured to DIN 13 with tolerance class 6H, matching common metric ISO fine‑thread specifications. What is the intended use of this type of plug gauge? This plug gauge serves as a Go/No‑Go verification tool for internal threads, enabling quick pass/fail assessment in production and incoming inspection. Which material is used for the gauge and why does it matter? Made from hardened gauge steel, the gauge resists wear and retains thread form, ensuring repeatable checks over many cycles. What is the SKU for ordering reference? Order reference: M315.520.9, which identifies the Metav IndustryLine GUT M120 x 4.0 plug gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x4 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take immediate control of thread quality with a hardened, calibrated no‑go plug that verifies compliance with DIN 13, 6H tolerances; its M120×4 right‑hand geometry and robust gauge steel construction minimise wear and ensure repeatable rejection decisions. Order directly via Metav Werkzeuge or consult the Metav team for configuration and supply. Reject (No‑go) thread plug gauge M120×4 — right‑hand, hardened gauge steel (Metav IndustryLine) Reject (No‑go) thread plug gauge M120×4 designed for swift verification of metric ISO fine internal threads in production and inspection environments No‑go verification for M120×4 metric fine threads Hardened gauge steel for durable service life Supplied with calibration certificate Compliant with DIN 13, tolerance class 6H Ensure only conforming threads reach assembly A dedicated no‑go plug provides an unequivocal pass/fail decision during incoming inspection and in‑process checks. By failing threads that exceed the maximum material condition, the gauge prevents assembly faults and downstream rework. The combination of clearly defined geometry and the DIN 13, 6H tolerance basis delivers objective, repeatable results that fit documented quality procedures and reduce costly ambiguity in acceptance criteria. Built to resist wear and keep tolerances Manufactured from hardened gauge steel, the plug is dimensionally stable under repeated use and resists the abrasion typical in high‑volume inspection loops. The substantial mass (approx. 2.2 kg) reflects a robust design that helps preserve thread form and gauge integrity over long inspection runs. The right‑hand M120×4 profile is machined to provide a decisive seating condition: if the plug cannot be fully engaged, the thread exceeds the allowable size and is marked for rejection, preserving product reliability. Traceable calibration for audit readiness The tool is supplied with a calibration certificate, confirming measurement traceability and supporting quality audits and production records. This documentation simplifies integration into ISO‑aligned inspection plans and enables traceable monitoring of gauge condition over time. The gauge’s clear, single‑function design streamlines operator instructions and reduces the potential for misinterpretation during routine checks. Practical use and workshop integration The plug is intended for systematic checks of metric ISO fine internal threads in machining, fabrication and quality control environments. It functions as part of a straightforward acceptance workflow: a correct seat indicates conformance within the specified tolerance band, while a firm refusal to engage signifies an out‑of‑tolerance condition requiring corrective action. The gauge’s hardened construction and standardised form make it suitable for repeated cyclic use in production lines and inspection benches. For reliable reject verification of M120×4 metric fine threads, contact Metav Werkzeuge for procurement and expert advice on integrating this no‑go plug into existing inspection routines. Technical data SKU: M315.620.9 GTIN: 4054469154954 Weight: 2.2 kg Thread size: M120×4 Direction: right‑hand Standard: DIN 13, 6H Customs tariff number: 90173000 Core technical figures Material: gauge steel, hardened Type: no‑go (reject) plug gauge Supplied with: calibration certificate Category: plug gauge / gauge pin (inspection tool) Intended use: verification of metric ISO fine internal threads Special features and notes Suitable for production and incoming inspection Robust design for repeatable measurements Clear go/no‑go decision without measurement interpretation Care: store in dry conditions to avoid corrosion FAQ What does "no‑go" or "reject" mean for this plug gauge? The no‑go (reject) plug gauge is intended to detect threads that are oversize or otherwise out of the allowed tolerance band; if the plug does not fully engage, the part is rejected. The Reject (No‑go) thread plug gauge M120×4 provides this clear binary check for metric ISO fine internal threads. Is a calibration certificate included with the gauge? Yes, the plug gauge is supplied with a calibration certificate that documents traceability and measurement conformity, supporting audit requirements and quality records for the Metav IndustryLine Reject (No‑go) thread plug gauge M120×4. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for its wear resistance and dimensional stability; these properties preserve the plug’s geometry under repeated use and maintain consistent rejection thresholds. For which standard and tolerance class is this gauge suitable? The tool is manufactured to the DIN 13 specification and corresponds to tolerance class 6H, making it suitable for verifying metric ISO fine internal threads produced to that standard. Can this plug be used on left‑hand threads? This specific item is produced for right‑hand threads in the M120×4 form; left‑hand applications require a corresponding left‑hand gauge produced to the same dimensions and tolerance class. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x4 Thread Ring Gauge, Go, Metric ISO Fine Pitch, Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Robust hardened gauge steel construction and clear conformity to DIN 13, tolerance 6g enable reliable go/no‑go thread checks; supplied with a traceable calibration certificate for immediate use on the shop floor. Order the GO thread ring directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Thread ring gauge GO M120 x 4.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread ring gauge GO M120 x 4.0 is a precision right‑hand ring gauge for fast verification of external metric ISO fine threads in production and incoming‑goods inspection. Includes calibration certificate Hardened gauge steel construction For metric ISO fine thread M120 x 4.0 Conforms to DIN 13, tolerance 6g Reliable acceptance checks to keep production flowing The GO ring is designed for repeatable, tactile acceptance tests during series production. As a GO gauge, it verifies that external threads meet the lower limit of the tolerance band; if the ring fits onto a thread, the part passes the acceptance check. Made of hardened gauge steel, the ring resists wear and preserves dimensional stability over many cycles, which reduces scrap rates and minimises downtime. This direct pass/fail method is simple to integrate into assembly stations and quality control benches. Traceable calibration for documented quality assurance Delivered with a calibration certificate, the gauge is ready for use where documented traceability is required. The supplied certificate supports internal quality records and supplier audits, enabling straightforward proof of conformity for audits and incoming inspection. The presence of a calibration document increases confidence in repetitive checks and helps fulfil customer or regulatory requirements without delay. Practical design and conformity for fine‑thread applications The gauge follows DIN 13 with tolerance class 6g, matching the standard specification for metric fine threads and ensuring compatibility with common engineering practice. The right‑hand geometry is optimised for standard external thread forms, and the nominal designation M120 x 4.0 identifies the thread diameter and pitch clearly. With a mass of approximately 2.2 kg, the ring provides robust feel in handling and resists inadvertent distortion during normal shop use, supporting consistent measurements across production shifts. For tailored advice or to secure a supply of GO thread rings from Metav Werkzeuge — direct from Emmerich with expert support by phone or email — contact our sales team for application recommendations and delivery options Technical data Article number: M315.720.9 GTIN: 4054469155135 Size: M120 x 4.0 Material: Gauge steel, hardened Standard: DIN 13, 6g Weight: 2.2 kg Tariff number: 90173000 Includes calibration certificate Facts Nominal thread: M120 x 4.0 Tolerance class: 6g Mass: 2.2 kg Special features Go gauge (GUT) Right‑hand thread Hardened gauge steel Delivered with calibration certificate FAQ What does the GO designation mean for this thread gauge? The GO designation indicates the ring is a pass gauge for external threads; the Thread ring gauge GO M120 x 4.0 must fit onto a part for that part to pass the acceptance check. Is a calibration certificate supplied with the gauge? Yes — this ring gauge is supplied with a calibration certificate, enabling documented traceability for quality records and inspections. Which standard and tolerance does the gauge follow? The gauge conforms to DIN 13 with tolerance class 6g, matching common specifications for metric ISO fine threads. For which applications is this ring gauge appropriate? The gauge is intended for production and incoming‑goods inspection of external metric fine threads such as M120 x 4.0, where quick go/no‑go verification is required. What material is the gauge made from and how does that benefit use? Constructed from hardened gauge steel, the ring offers high wear resistance and dimensional stability, ensuring long service life and repeatable checks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com