Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M120x6 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combine hardened construction, DIN 13 tolerance class and an included calibration certificate to secure reproducible quality checks in production; this no‑go plug gauge reduces the risk of non‑conforming internal threads reaching assembly. Order the gauge via Metav Werkzeuge or consult our specialists for application-specific advice. No-go thread plug gauge M120 x 6 (right-hand) — Metav IndustryLine No‑go thread plug gauge M120 x 6 for verification of metric ISO fine internal threads in workshop and production quality control. Hardened gauge steel construction For metric ISO fine thread M120 x 6 Conforms to DIN 13, tolerance 6H Supplied with calibration certificate Robust gauging for dependable thread inspection Built as a no‑go plug gauge, this inspection mandrel is designed to control internal metric fine threads with repeatable results. The M120 x 6 designation specifies a 120 mm nominal diameter with a 6 mm pitch, and the tool is manufactured in hardened gauge steel to resist wear and maintain form over repeated use. Conformity to DIN 13 with a 6H tolerance class ensures the member reflects standard engineering limits; using a dedicated no‑go member in a Go/No‑Go set prevents parts that exceed allowable tolerances from passing inspection, thereby reducing rework and assembly failures. Traceable calibration and consistent measurement practice The gauge is supplied with a calibration certificate, documenting inspection at delivery and providing traceability for quality systems and audits. Where traceable results are required for internal quality assurance or supplier control, the calibration paperwork supports consistent acceptance criteria and audit trails. The construction and documentation together serve the rational need for reliable, verifiable measurement in production control and incoming inspection. Efficient integration into routine inspection workflows As a right‑hand-thread no‑go member, the plug gauge is suitable for direct, tactile verification in fast inspection cycles; it requires no special fixturing beyond standard handling and can be incorporated into bench checks, assembly line stations or final inspection steps. The robust material and standardised thread form keep operating life high and maintenance low, making the tool a pragmatic choice for repeat checks where quality control and throughput must be balanced. Contact Metav Werkzeuge for availability and tailored advice on Metav IndustryLine thread gauges supplied with calibration certificates and production-ready documentation Technical data Article number: M315.620.A GTIN: 4054469155623 Size: M120 x 6 Manufacturer: Metav IndustryLine Material: hardened gauge steel Standard: DIN 13, 6H Type: no‑go plug gauge, right‑hand Note: supplied with calibration certificate Numbers / Core technical data Nominal diameter: 120 mm Thread pitch: 6.0 mm Weight: 2.5 kg Tariff number: 90173000 Special features / Design details Hardened gauge steel construction Metric ISO fine thread form Right‑hand thread orientation No‑go member for Go/No‑Go testing Supplied with calibration certificate FAQ What is the intended use of this plug gauge? This no‑go plug gauge is intended for tactile inspection of internal metric ISO fine threads — specifically M120 x 6 — to prevent parts outside the tolerance class from being accepted. Does the gauge come with documentation for quality records? Yes, the tool is supplied with a calibration certificate, which documents inspection at delivery and supports traceability in quality systems. What does the designation 6H mean for inspections? The 6H tolerance class refers to the standard internal thread tolerance according to DIN 13; the gauge represents the no‑go limit against which parts are checked for compliance. Can this gauge be used for both left‑ and right‑hand threads? This particular member is manufactured for right‑hand threads; left‑hand threads require a gauge made with the corresponding helix orientation. Is the material suitable for industrial use? The gauge is produced from hardened gauge steel, which offers high wear resistance and dimensional stability under routine inspection conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x6 Thread Go Plug Gauge, Metric ISO Fine Thread Right-Hand, Calibrated Certificate, DIN 13 6H - Metav IndustryLine
Take advantage of precise, hardened construction and traceable calibration to keep thread inspections reliable and reproducible; combine DIN‑compliant tolerances with durable gauge steel for consistent pass/fail decisions. Order the gauge via Metav Werkzeuge or consult Metav's technical advisers for application guidance. Thread plug gauge GO M120 x 6.0 — Metric ISO fine thread gauge, DIN 13 (6H), hardened gauge steel (Metav IndustryLine) The Thread plug gauge GO M120 x 6.0 is a right‑hand, precision checking gauge for metric ISO fine threads, designed for acceptance testing and routine inspection in production and quality control environments Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, tolerance 6H For metric ISO fine threads, right‑hand Reliable acceptance testing with defined tolerances The gauge is manufactured to DIN 13, tolerance 6H, so it provides an objective pass/fail assessment of internal threads. Using a dedicated GO plug eliminates subjective judgement: if the plug enters smoothly, the thread meets the specified tolerance band; if it does not, the component can be segregated for rework. This reduces scrap and avoids ambiguous measurements, improving throughput in serial production. Built for longevity and repeatability Made from hardened gauge steel, the design prioritises wear resistance and dimensional stability under repeated use. The robust construction maintains thread geometry and minimises measurement drift, which means fewer replacements and lower lifetime costs. The compact, single‑piece form simplifies handling on the shop floor and supports consistent inspection routines without specialised fixtures. Supplied calibrated for immediate use Delivered with a calibration certificate, the gauge is ready for documented inspection right away. Traceable calibration ensures the measuring standard can be referenced in quality records and audits; the certificate documents the measured dimensions and acceptance status at delivery. This formal documentation supports quality systems and provides peace of mind when integrating the gauge into existing inspection plans. Practical application and handling notes Intended for right‑hand metric ISO fine threads (M120 × 6), the gauge suits workshop, toolroom and production checkpoints where a rapid, unambiguous check is required. The unit functions as a go/no‑go decision tool for internal threads and is particularly useful during final inspection or first‑article checks. Careful storage and periodic recalibration preserve accuracy and ensure continued conformity to inspection protocols. Contact Metav Werkzeuge in Emmerich for tailored advice on integration and calibration intervals, or request a technical datasheet to confirm suitability for specific thread series and production environments. Technical Data Article number: M315.520.A GTIN: 4054469155494 Manufacturer: Metav IndustryLine Size: M120 x 6 Weight: 3 kg Material: gauge steel, hardened Standard: DIN 13, 6H Delivery: supplied with calibration certificate Core technical figures Thread: M120 x 6 Tolerance class: 6H Weight: 3 kg Customs tariff number: 90173000 Features and applications Right‑hand metric ISO fine thread GO plug gauge For inspection and acceptance testing of internal threads Hardened gauge steel for wear resistance Supplied calibrated with certificate Category: gauges, plug gauges Suitable for workshop and production checks FAQ What does the GO designation mean for this plug gauge? The GO label indicates a plug gauge for acceptance checks; the Thread plug gauge GO M120 x 6.0 verifies that internal threads meet the lower limit of the specified tolerance band. Is the gauge ready to use on receipt? Yes, the gauge is supplied calibrated and includes a calibration certificate, so it can be used immediately for documented inspections. Which standard does the gauge comply with? Manufactured and checked to DIN 13, tolerance 6H, the gauge is suitable for standard metric ISO fine thread inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x6 Thread Go/No-Go Ring Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a precision-tested combination of a No‑go ring for M120 x 6 threads, hardened gauge steel construction and an included calibration certificate for reliable pass/fail decisions on external metric ISO fine threads; order the gauge directly via Metav Werkzeuge or consult the Metav team for specification support. Thread Ring Gauge No‑Go M120 x 6.0 — right‑hand metric ISO fine‑thread verification, hardened gauge steel The Thread Ring Gauge No‑Go M120 x 6.0 is designed for quick go/no‑go assessment of external metric ISO fine threads, right‑hand orientation, and compliance with DIN 13, 6g tolerances. No‑go ring for M120 x 6 Hardened gauge steel construction Compliant with DIN 13, 6g Delivered with calibration certificate Reduce rejects by preventing oversized threads A dedicated No‑go gauge provides an immediate, unambiguous check for external threads and stops oversized parts from proceeding through assembly. By verifying the critical M120 x 6 dimension against the DIN 13, 6g tolerance, the device shortens inspection cycles and removes subjective judgement from routine checks. The direct, mechanical pass/fail result reduces downstream rework, increases throughput in production lines and supports consistent quality assurance procedures. Built for repeatability and workshop resilience Constructed from hardened gauge steel, the ring offers long service life and dimensional stability under frequent handling. The right‑hand thread geometry mirrors typical production parts for direct comparison, while the substantial mass contributes to a stable feel during verification. This robust build reduces the need for frequent replacement and keeps calibration intervals predictable, helping maintenance planners and quality engineers allocate resources more efficiently. Traceable measurements for audit‑ready documentation The gauge is supplied with a calibration certificate, ensuring measurement traceability and documented conformity for quality records. This certificate supports internal audits and supplier controls, allowing inspection results obtained with the ring to be linked to recognised calibration events. For regulated manufacturing and controlled supply chains, the included documentation demonstrates a commitment to traceable quality control without additional calibration steps before first use. For reliable thread verification from the Metav IndustryLine range and tailored advice on integration into existing quality processes, contact Metav Werkzeuge for direct ordering and specification consultation from Emmerich. Technical Data Article number: M315.820.A GTIN: 4054469155883 Label: Thread ring gauge No‑Go M120 x 6.0, right‑hand Facts Thread size: M120 x 6 Weight: 2.5 kg Standard: DIN 13, 6g Special features Material: Gauge steel, hardened Type: No‑go (Ausschuss) ring gauge, right‑hand thread Calibration: Delivered with calibration certificate FAQ What does a No‑go ring gauge check? The No‑go ring gauge is used to check external threads; if the thread does not fit the ring, the part is rejected. The Thread Ring Gauge No‑Go M120 x 6.0 is intended to prevent oversized external threads from passing inspection. Is the gauge ready for use on delivery? Yes, the ring is supplied with a calibration certificate, so the Thread Ring Gauge No‑Go M120 x 6.0 can be integrated into quality control routines immediately with documented traceability. Which standard does this gauge comply with? The gauge is manufactured for verification to DIN 13, 6g tolerances and is suitable for metric ISO fine threads specified as M120 x 6. Can this gauge be used on left‑hand threads? This specific ring is a right‑hand thread gauge; left‑hand thread verification requires the corresponding left‑hand gauge version. How should the gauge be stored to maintain accuracy? Store the ring in a dry, stable environment and protect it from mechanical shocks; regular handling with care and periodic recalibration as per internal schedules will maintain the measurement integrity of the Thread Ring Gauge No‑Go M120 x 6.0. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120x6 Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of rapid pass/fail inspection, hardened gauge steel durability and conformity to DIN 13 (6g) for consistent thread quality control on metric fine threads; order this gauge directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Go/No-Go Thread Ring Gauge GUT M120 x 6.0 — Hardened Gauge Steel, DIN 13 (6g) — Metav IndustryLine The Go/No-Go thread ring gauge GUT M120 x 6.0 is a right‑hand inspection gauge designed for immediate verification of metric ISO fine threads in production and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Rapid, unambiguous thread inspection for production control The primary advantage of a Go/No-Go ring gauge is immediate, objective evaluation of threaded parts: the "Go" side confirms correct form and pitch while the "No‑Go" side reveals oversize or out‑of‑tolerance threads. This method reduces inspection time and decision latency on the shop floor, improving throughput and lowering the risk of assembly failures. The M120 x 6.0 designation identifies the metric fine thread size, making the gauge suitable for large‑format fastenings where repeatability is critical. Clear pass/fail checks support statistical process control and help maintain consistent production quality. Durable construction that sustains measurement integrity Manufactured from gauge steel, hardened, the gauge is built to withstand regular engagement with mating threads while maintaining calibrated limits. Conformity to DIN 13 and tolerance class 6g provides a recognised reference for interchangeability and inspection procedure documentation. The robust material choice minimises wear and dimensional drift, so fewer replacements are needed and downtime is reduced. The right‑hand orientation is standard for most metric applications; the solid construction and precise machining ensure that the inspection tool keeps providing reliable results across many cycles. Simple integration into quality assurance workflows Delivery includes a calibration certificate, enabling traceability in quality records and facilitating acceptance during audits. The gauge is supplied as a ready‑to‑use inspection tool compatible with routine incoming checks, in‑process control and final inspection stations. Markings such as the GTIN and the manufacturer SKU M315.720.A allow easy inventory tracking and documentation. As part of a calibrated inspection regime, the ring gauge speeds up decision making and supports conformity statements required by customers and standards bodies, while the compact inspection method helps shops maintain a practical, space‑efficient metrology setup. Contact Metav Werkzeuge in Emmerich for availability, technical advice or application matching for this Metav IndustryLine thread ring gauge Technical Data SKU: M315.720.A GTIN: 4054469155753 Weight: 3 kg Material: Gauge steel, hardened Thread size: M120 x 6.0, right‑hand Standard: DIN 13, 6g Tariff number: 90173000 Facts Mass/size: M120 x 6.0 Accuracy/tolerance class: 6g Weight (kg): 3 Special features GUT designation for pass (Go) checking Supplied with calibration certificate Designed for metric ISO fine threads Category: Gauges / Inspection rings FAQ What is the intended use of this ring gauge? The ring gauge is intended for pass/fail thread inspection of metric ISO fine threads; the Metav IndustryLine Go/No‑Go gauge M315.720.A verifies conformity to the DIN 13, 6g specification. Does the gauge come calibrated? Yes; the product is supplied with a calibration certificate, enabling traceability and integration into quality documentation for inspection routines. Which thread standard does this gauge follow? The gauge conforms to DIN 13 with tolerance class 6g, making it suitable for standard metric ISO fine thread verification. Can this gauge be used for left‑hand threads? This particular version is manufactured as a right‑hand thread ring gauge; left‑hand requirements would need a corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120×1.5 Thread Go Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Taking advantage of hardened gauge steel, DIN compliance and a supplied calibration certificate ensures reproducible thread inspection and lower scrap rates; order the gauge directly via Metav Werkzeuge or consult the team for application advice. Thread Plug Gauge M120 x 1.5 — No‑Go, right‑hand (Metav IndustryLine) A Thread Plug Gauge M120 x 1.5 No‑Go, right‑hand for checking metric ISO fine threads to DIN 13, 6H; built for workshop and shop‑floor inspection of large‑diameter internal threads. Hardened gauge steel construction For M120 x 1.5 metric fine threads Supplied with calibration certificate Consistent pass/fail control for fine metric threads The no‑go thread plug offers a direct, reliable method to verify whether an internal thread remains within the reject limit defined by DIN 13, 6H. Designed for routine in‑process checks, this inspection master reduces the need for time‑consuming measurements by providing an immediate pass/fail result. The combination of a large nominal diameter and a clearly defined 1.5 mm pitch makes the tool particularly effective for components where thread integrity directly affects assembly safety and sealing performance. Supplied ready for use, the gauge supports faster quality decisions and fewer downstream rejects. Traceable calibration that supports quality systems Delivered with a calibration certificate, the gauge documents measurement status for audits and internal quality records. The included evidence of calibration provides traceability across production batches and assists in meeting customer or ISO‑aligned documentation requirements. The reject‑limit function is especially useful where statistical process control or batch release depends on a clearly documented acceptance criterion. Retaining calibrated inspection tools on the shop floor helps to maintain consistent production parameters and supports continuous improvement activities. Robust construction for repetitive workshop use Manufactured from hardened gauge steel, the plug gauge is engineered for longevity and resistance to wear under high‑use conditions. The right‑hand thread form and solid design ensure stable engagement during inspection cycles, while the substantial mass contributes to a controlled feel and ease of handling. Compliance with the relevant metric thread standard guarantees compatibility with standardised mating parts and reduces uncertainty when integrating new components. Together, durability and standard conformity protect measurement accuracy over many inspection cycles and lower total cost of ownership. For dependable thread inspection using the Metav IndustryLine no‑go plug, contact Metav Werkzeuge for product guidance and procurement assistance — the team in Emmerich will advise on suitability and delivery. Technical data Article number: M315.620.6 GTIN: 4054469152301 Material: Gauge steel, hardened Thread: M120 x 1.5 Direction: Right‑hand Standard: DIN 13, 6H Weight: 2.2 kg Facts Nominal diameter: 120 mm Pitch: 1.5 mm Tariff number: 90173000 Special features No‑Go (reject) gauge function Supplied with calibration certificate Category: Gauges / Thread inspection Suitable for metric ISO fine threads FAQ What does the No‑Go function check? The No‑Go function verifies that an internal thread exceeds the permitted reject limit; the Thread Plug Gauge M120 x 1.5 No‑Go, right‑hand (Metav IndustryLine, SKU M315.620.6) indicates immediate rejection if the instrument does not seat. Is the gauge delivered calibrated? Yes, the plug gauge is supplied with a calibration certificate, confirming the calibration status of the Metav IndustryLine thread plug and supporting traceability for quality records. Which standard does this gauge conform to? The gauge conforms to DIN 13, 6H for metric ISO fine internal threads; this ensures compatibility with standardised mating parts and accepted inspection criteria. Can this gauge be used for left‑hand threads? This specific item is a right‑hand No‑Go plug gauge; left‑hand applications require the corresponding left‑hand version rather than the Metav IndustryLine right‑hand model M315.620.6. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M120×3 Thread Go Plug Gauge Metric ISO Fine Thread Right-Hand DIN 13 6H With Calibration Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and conformity to DIN 13, 6H for reliable thread verification; the included calibration certificate ensures traceable results and immediate use in quality control. Order the gauge directly via Metav Werkzeuge or consult the Metav team for technical advice. Thread plug gauge GO M120 x 3.0 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread plug gauge GO M120 x 3.0 is a hardened plug gauge designed for fast verification of metric ISO fine internal threads in right‑hand format for production and inspection environments GO plug gauge M120 x 3.0 Hardened gauge steel construction Conforms to DIN 13, 6H Includes calibration certificate Reliable thread inspection for process control The GO plug design provides a fast binary check of internal thread conformity, confirming thread form and minor diameter without elaborate measurement steps. Built to the DIN 13 tolerance system with 6H fit, this gauge serves as a pragmatic quality gate in production lines where speed and repeatability are essential. Its simple pass/fail function reduces decision latency on the shop floor and integrates smoothly into routine inspection cycles, translating directly into fewer non‑conforming assemblies and less rework. Durable construction for continuous workshop use Manufactured from hardened gauge steel, the gauge resists wear from repeated engagement and preserves the reference condition required for reliable inspections. The solid build and balanced mass support stable handling during rapid checks; the nominal mass is 2.2 kg, which aids controlled insertion and reduces wobble. As a right‑hand metric tool, it is ideally matched to assemblies using M120 x 3.0 fine threads and is suitable for repetitive use in machine shops, assembly lines and incoming goods inspection where robustness and low downtime are priorities. Traceable calibration and quality assurance Delivered with a calibration certificate, the plug gauge is ready for inclusion in documented quality systems and helps fulfil internal traceability requirements. The presence of a certificate confirms that the reference dimensions were verified at delivery, supporting audits and production records. Where a documented inspection chain is required, this GO plug gauge from Metav IndustryLine provides a verifiable control instrument that can be recorded in quality databases and used immediately in routine acceptance tests. For reliable and traceable thread verification, contact Metav Werkzeuge in Emmerich to request the Metav IndustryLine GO plug gauge (M315.520.8) or to obtain tailored technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.520.8 GTIN: 4054469154022 Label: Gewinde‑Lehrdorn GUT M 120 X 3,0 für metrisches ISO‑Feingewinde, rechts Material: Gauge steel, hardened Norm: DIN 13, 6H Weight: 2.2 kg Facts Thread size: M120 x 3.0 Tariff number: 90173000 Special features GO plug gauge (GUT marking) Right‑hand metric ISO fine thread Includes calibration certificate Category: Gauge / Plug gauge (Lehren, Messstifte) FAQ What application is this plug gauge intended for? This plug gauge is intended for rapid verification of internal metric ISO fine threads, specifically M120 x 3.0 in a right‑hand form, as supplied by Metav IndustryLine. Is the gauge delivered calibrated? Yes — the device is supplied with a calibration certificate, confirming that the plug gauge has been checked and documented at delivery. Which standard does the gauge conform to? The gauge conforms to DIN 13 with a tolerance class of 6H, making it suitable for standardised inspection procedures. Can this gauge be used for external thread inspection? No — this is a GO plug gauge for internal threads. External thread checks require a corresponding ring gauge or complementary measurement method. How durable is the material for frequent use? Made from hardened gauge steel, the plug gauge is designed for repeated engagement in production environments and maintains reference dimensions under normal use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x0.5 Thread Go Gauge For ISO Fine Thread Right-Handed Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Hardened gauge steel construction combined with the DIN 13 tolerance class 6g and the precise M12 x 0.5 thread form ensures repeatable thread assessment and long service life; order directly via Metav Werkzeuge or consult our technical advisors for application advice. Thread ring gauge M12 x 0.5 – DIN 13, 6g (Metav IndustryLine) A Thread ring gauge M12 x 0.5 designed for reliable inspection of metric ISO fine threads in industrial production and quality control environments. Hardened gauge steel construction For M12 x 0.5 metric fine thread DIN 13 tolerance class 6g Right-hand thread configuration Ensure consistent thread acceptance across production The ring is engineered for standardised acceptance testing of metric fine threads, providing a clear, reproducible criterion for pass/fail decisions. Made to DIN 13 and tolerance class 6g, the gauge supports efficient quality routines and reduces uncertainty in inspection steps. Using a hardened verification tool like this speeds up throughput by eliminating subjective judgements and enables tighter process control, which translates into fewer scrapped parts and lower rework rates. Robust material and compact handling for everyday use Constructed from hardened gauge steel, the component sustains repeated use in workshop and shop‑floor settings with minimal wear. The compact mass of 0.08 kg allows easy manual handling and rapid placement on the spindle or sample fastener; the material choice preserves the thread form over long inspection runs and keeps maintenance intervals low. The right‑hand metric configuration matches common production threads for straightforward alignment with existing test benches. Traceable identification and fast integration into QC systems Marked and identifiable for inventory and traceability, the ring arrives ready to be recorded in inspection logs and process documentation. The SKU M315.212.2 and GTIN ensure unambiguous ordering and stock control, easing integration into a calibrated tool set. As a precision metrology instrument the gauge fits into documented inspection workflows, helping maintain consistent output quality while aligning with shop procedures and audit requirements. Speak with Metav Werkzeuge for a specification review and order of the Metav IndustryLine M12 x 0.5 thread ring gauge (SKU M315.212.2); technical consultants in Emmerich will advise on application and supply options Technical data Article number: M315.212.2 GTIN: 4054469125657 Weight: 0.08 kg Facts Thread size: M12 x 0.5 Standard: DIN 13 Tolerance: 6g Special features Material: hardened gauge steel Right-hand metric ISO fine thread Category: Thread ring gauge FAQ What is this gauge used for? This ring gauge is intended for inspection of metric ISO fine threads and validates M12 x 0.5 threads against the DIN 13 6g acceptance criterion. Which standard and tolerance does it follow? The tool conforms to DIN 13 with a tolerance classification of 6g, suitable for standard quality control tasks on fine metric threads. What material is the gauge made from and why does that matter? Manufactured from hardened gauge steel, the ring resists wear and preserves the thread profile over repeated use, ensuring consistent measurement results. How can this gauge be recorded in inventory and quality systems? Use the SKU M315.212.2 and GTIN 4054469125657 for unambiguous stock keeping and to document the item in inspection records. Is the gauge suitable for shop‑floor production checks? Yes; its compact weight and robust construction make it suitable for regular shop‑floor acceptance testing and routine quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x0.5 Thread Go/No-Go Plug Gauge Right-Hand Metric ISO Fine Thread, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a compact, standards‑compliant inspection tool that combines hardened gauge steel and the accuracy of DIN 13, tolerance class 6H to secure repeatable thread checks. Order the limit thread plug gauge directly via Metav Werkzeuge or contact our consultants for application advice. Limit thread plug gauge M12 x 0.5 (right‑hand) — Metav IndustryLine Limit thread plug gauge M12 x 0.5 for fast verification of metric ISO fine threads in production and quality control Metric fine thread M12 x 0.5 check gauge Hardened gauge steel for long service life Manufactured to DIN 13, tolerance class 6H Right‑hand limit plug gauge, compact 0.09 kg Reliable verification for production accuracy A limit plug gauge is a straightforward physical control that confirms whether an internal thread falls within specified limits. The M12 x 0.5 size and DIN 13 (6H) tolerance class address common metric fine‑thread applications, enabling quick pass/fail decisions at the machine or inspection bench. Because the check is tactile and immediate, cycle times for part inspection are reduced, and non‑conforming batches are identified before further processing, which supports higher first‑time quality and fewer costly reworks. Simple interpretation and seamless process integration The design of this right‑hand plug gauge emphasises ergonomic handling and uncomplicated use: insert the gauge to verify conformity, withdraw it to confirm acceptance or rejection. At a nominal mass of 0.09 kg the tool is easy to manoeuvre during repetitive checks and can be fitted into existing inspection routines without additional equipment. The firm construction limits measurement variation from handling, which contributes to consistent results across different operators and shifts, improving overall process reliability. Durable construction and traceable standard compliance Manufactured from hardened gauge steel, the gauge is built for repeated contact with threaded holes while resisting wear that would otherwise compromise accuracy. Conformity to DIN 13, 6H provides a clear technical basis for acceptance criteria in audits and quality documentation. The compact form factor and robust material mean the gauge maintains geometric integrity over time, making it a dependable element of a traceable quality system and a practical alternative to time‑consuming dimensional checks during routine inspection. Contact Metav Werkzeuge today to confirm suitability for specific thread series, request procurement support or arrange technical clarification directly from our specialists at Metav Werkzeuge GmbH in Emmerich. Technical Data SKU: M315.012.2 GTIN: 4054469122328 Manufacturer: Metav IndustryLine Core specifications Thread size: M12 x 0.5 Weight: 0.09 kg Tariff number: 90173000 Standard: DIN 13, tolerance class 6H Materials & features Material: gauge steel, hardened Right‑hand thread design Intended for metric ISO fine threads Category: limit thread plug gauge FAQ What does the limit thread plug gauge check? The limit thread plug gauge M12 x 0.5 checks whether an internal metric ISO fine thread meets the dimensional and tolerance requirements defined by DIN 13 (6H) by providing a direct pass/fail verification. Can this gauge be used at the production machine? Yes, the compact construction and modest mass of the Metav IndustryLine plug gauge allow it to be used both at the machine and on the inspection bench for rapid conformity checks. How durable is the gauge for repetitive inspection tasks? Constructed from hardened gauge steel, the gauge is designed for repeated use with minimal wear, helping to preserve measurement integrity across many inspection cycles. Is the gauge suitable for fine‑thread applications only? This specific item is a fine‑thread gauge for M12 x 0.5 metric threads; use other sizes or classes for coarse threads or different tolerances. Which standards apply to this plug gauge? The tool is produced to meet the requirements of DIN 13, tolerance class 6H, providing a recognised benchmark for acceptance testing of metric internal threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x0.5 Thread Ring Gauge For Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Hardened gauge steel construction and DIN 13 tolerance class 6g ensure dependable verification of M12 x 0.5 fine threads; order the thread gauge ring directly via Metav Werkzeuge or consult our specialists for tailored advice. Thread gauge ring M12 x 0.5 (go) – hardened gauge steel, DIN 13 (Metav IndustryLine) The Thread gauge ring M12 x 0.5 is a right‑hand metric go ring for fast verification of external fine threads to DIN 13, designed for production and workshop use. M12 x 0.5 metric fine thread check DIN 13 tolerance class 6g Hardened gauge steel construction Right‑hand, go gauge ring Ensure production conformity with a compact go ring The go ring is a simple, reliable tool for immediate pass/fail verification of external threads. Manufactured from hardened gauge steel, the ring provides durable contact surfaces that resist wear and maintain the required profile over long inspection cycles. Matched to DIN 13 and the 6g tolerance class, this ring verifies that an M12 x 0.5 thread meets the nominal form and size; acceptance is immediate when the part enters the ring without binding. This direct measurement method reduces downtime compared with full dimensional inspection and supports efficient inline quality control in assembly and machining environments. Faster inspection, fewer reworks — measurable shopfloor benefits Using a dedicated thread gauge ring accelerates quality checks and removes ambiguity from go/no‑go decisions. The mechanical pass/fail result is rapid and requires minimal operator training, which translates to higher throughput and reduced scrap rates in series production. Built to withstand repeated use, the gauge’s hardened surfaces maintain dimensional integrity, supporting reproducible inspections and consistent assembly quality. For workshops requiring straightforward verification of metric fine threads, this gauge is a practical investment that streamlines routine controls and supports traceable production processes. Robust handling and long service life for everyday shop use With a compact footprint and a low mass of approximately 0.07 kg, the ring is easy to handle and store without occupying critical bench space. The right‑hand design aligns with standard threaded parts, and the go configuration provides a definitive acceptance criterion for external threads. Routine care — a light oil film and clean storage — prolongs service life and preserves measurement confidence. Confidence in the inspection tool supports operator assurance and helps maintain product reputation through consistently checked thread fits. Contact Metav Werkzeuge for availability and technical matching of gauges to production needs; Metav Werkzeuge offers rapid advice from Emmerich and tailored delivery options Technical Data Article number: M315.112.2 GTIN: 4054469123998 Size: M12 x 0.5 Mass: 0.07 kg Standard: DIN 13, 6g Numbers / Core technical data Tolerance class: 6g Direction: right‑hand Type: go ring Special features / Materials Material: gauge steel, hardened Application: verification of external metric ISO fine threads Category: thread gauge ring FAQ What is the purpose of this ring gauge? The thread gauge ring M12 x 0.5 is used for quick pass/fail verification of external M12 × 0.5 metric fine threads to DIN 13, ensuring threaded parts meet the required profile and tolerance. Can this gauge be used for left‑hand threads? No, this particular ring is a right‑hand go gauge; left‑hand thread inspection requires a ring made specifically for left‑hand threads. How durable is the material of the gauge? Constructed from hardened gauge steel, the ring gauge is designed for repeated shopfloor use with high wear resistance and long service life under normal inspection routines. Is this tool suitable for production line sampling? Yes, the mechanical go/no‑go principle of the thread gauge ring M12 x 0.5 supports rapid sampling and inline checks, reducing inspection time compared with full dimensional measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x0.75 Thread Ring Gauge Go Metric ISO Fine Right Handed, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of a hardened gauge‑steel design and DIN 13 / 6g tolerancing for fast, reliable thread inspection; the compact, right‑hand M12×0.75 Go ring gauge delivers repeatable pass/fail checks and long service life. Order the gauge directly via Metav Werkzeuge or consult the team for application advice. Thread ring gauge M12 x 0.75 (Go) — Metric ISO fine thread, DIN 13 — Metav IndustryLine Thread ring gauge M12 x 0.75 (Go) is a hardened, right‑hand inspection ring for production and incoming quality control of metric ISO fine threads. Hardened gauge steel construction For metric ISO fine thread M12×0.75 Manufactured to DIN 13, tolerance 6g Go gauge for quick pass/fail checks Fast, standards‑based thread inspection for production lines The thread ring gauge is engineered for efficient in‑process and incoming inspection of fine metric threads. With the M12×0.75 size and conformity to DIN 13 at 6g tolerance, the device provides a clear go/no‑go criterion that reduces subjective judgement during checks. This standardised approach shortens inspection times and supports consistent assembly fit, helping to avoid rework and line stoppages. The compact form factor and light weight make it suitable for use both at the bench and at production cells. Durable construction for repeatability and reduced downtime Manufactured from hardened gauge steel, the ring resists wear and maintains its profile over many engagement cycles, which preserves measurement integrity and extends replacement intervals. The robust finishing and material choice ensure the gauge keeps reliable contact geometry under typical shop‑floor handling. As a Go ring, it is intended to pass acceptable threads while blocking undersized or out‑form parts, enabling quick throughput checks without compromising traceability or repeatability in quality control routines. Practical integration into quality workflows The design supports rapid visual and tactile checks that integrate smoothly into pick‑and‑place inspection steps, first‑article inspection or sampling plans. Identification via SKU and GTIN simplifies inventory management and traceability. Supplied as a single, ready‑to‑use gauge, it complements calibrated master sets or portable measuring rigs. For customers seeking secure supply and consistent stock, distribution is handled from Metav’s European hub in Emmerich, which combines broad product availability with industry expertise for small and large orders alike. Select the Metav IndustryLine M12×0.75 Go thread ring gauge for robust, DIN‑compliant inspection — contact Metav Werkzeuge in Emmerich for ordering and detailed technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.112.3 SKU: M315.112.3 GTIN: 4054469124001 Label: Gewinde‑Lehrring M12 x 0,75 mm gut DIN 13, f. metr. ISO‑Feingewinde, rechts Core specifications Thread size: M12 × 0.75 mm Pitch: 0.75 mm Tolerance class: 6g (DIN 13) Weight: 0.07 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Thread direction: right‑hand Type: Go (pass) ring gauge Category: inspection gauges / ring gauges Brand: Metav IndustryLine FAQ What is the intended use of this ring gauge? The Metav IndustryLine thread ring gauge M12×0.75 (Go) is intended for pass/fail inspection of M12×0.75 metric ISO fine threads in production and incoming quality control. Does the gauge conform to a recognised standard? Yes, the gauge is manufactured to DIN 13 with a 6g tolerance class for metric threads. What material is the gauge made from and why does it matter? The ring is made from hardened gauge steel, which ensures wear resistance and dimensional stability during repetitive engagement cycles. Can this gauge verify left‑hand threads? This specific item is a right‑hand Go gauge; left‑hand versions must be ordered separately if required for a particular application. How is the product identified for inventory and traceability? Identification is available via SKU M315.112.3 and GTIN 4054469124001, which support procurement and inventory control in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of precise, standardised inspection with a compact limit thread plug gauge for metric fine threads; built to DIN 13 (6H) and manufactured from hardened gauge steel, this right‑hand gauge supports reliable pass/fail checks and repeatable production control. Order directly via Metav Werkzeuge or consult the team for application guidance. Limit thread plug gauge M12 x 1 — right‑hand, DIN 13 (6H) — Metav IndustryLine A limit thread plug gauge M12 x 1 designed to check metric ISO fine threads (right‑hand) in workshop and inspection environments. Hardened gauge steel construction Tolerance class DIN 13 (6H) Metric M12 x 1 fine‑pitch thread Compact, lightweight inspection tool Consistent thread verification for production control A compact limit gauge offers a fast, objective method for verifying that threaded parts meet the required specification. Manufactured from hardened gauge steel, the gauge is dimensionally stable and resists wear, which keeps the inspection result consistent over a long service life. The designation M12 x 1 identifies the metric nominal size and fine pitch; combining this with the DIN 13 (6H) tolerance class means the device checks both form and size within the internationally recognised limits for metric ISO threads. The result is fewer ambiguous measurements and a clearer go/no‑go decision in serial inspection. How the gauge secures conformity and reduces rework The primary advantage of a limit thread plug gauge is its simplicity: a tactile pass/fail check that replaces repeated measurement and calculation. The gauge verifies the thread profile and the functional pitch diameter against DIN 13 (6H) limits so that parts accepted on the gauge are assured to assemble correctly with mating components. Built as a right‑hand tool, it directly matches the handedness of typical threaded components. Using a dedicated inspection gauge in the control loop reduces scrap and rework, improving throughput and lowering the overall cost per part without compromising quality. Practical handling and storage for reliable results The compact format and low mass make this gauge easy to handle at the inspection bench or on the shop floor. Periodic visual checks for wear and light lubrication on storage will preserve the hardened gauge steel surface and maintain dimensional reliability. For traceable quality control, retain inspection records that reference the gauge's SKU and batch; this supports process audits and lot traceability. The lightweight design minimises operator fatigue during frequent checks while maintaining the stiffness required for accurate pass/fail assessment. Integration into quality workflows and procurement confidence Choosing a standardised limit gauge streamlines incoming inspection, in‑process checks and final inspection routines. The clearly defined compliance to DIN 13 (6H) aids communication with suppliers and customers, removing ambiguity over thread acceptance criteria. When combined with Metav IndustryLine's distribution and quality filtering in Emmerich, the gauge becomes part of a dependable supply chain: consistent product quality, comprehensive catalogue coverage and practical delivery options support uninterrupted production. Contact Metav Werkzeuge for procurement details or application advice on the Metav IndustryLine limit thread plug gauge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M315.012.4 GTIN: 4054469122342 Weight: 0.09 kg Numbers / Core Technical Data Thread size: M12 x 1 Tolerance class: DIN 13 (6H) Tariff code: 90173000 Special features / Material Material: hardened gauge steel Handedness: right‑hand thread Category: limit thread plug gauge (metric ISO fine thread) FAQ What is the primary use of this gauge? The limit thread plug gauge M12 x 1 is used to perform rapid go/no‑go checks on metric ISO fine threads, ensuring parts meet the DIN 13 (6H) limits. Does the gauge indicate handedness of the thread? Yes, this tool is manufactured as a right‑hand gauge and is intended for right‑hand metric threads such as M12 x 1. Which material is the gauge made from and why? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability during repeated inspections. How does compliance to DIN 13 (6H) benefit quality control? Adherence to DIN 13 (6H) provides a clear, standardised acceptance criterion for thread form and size, simplifying supplier communication and in‑house inspection rules. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1 Thread Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of hardened gauge steel construction and DIN 13, tolerance class 6g for fast, repeatable thread verification in production and incoming inspection. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M12 x 1 mm – DIN 13, 6g, hardened gauge steel (Metav IndustryLine) The Thread ring gauge M12 x 1 mm is a hardened inspection gauge designed for rapid verification of M12×1 metric ISO fine external threads in production, inspection and maintenance environments. Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g For metric ISO fine thread M12×1 right-hand Fast, reliable in-line thread inspection for production A compact, robust ring gauge based on DIN 13 and tolerance class 6g ensures swift go/no-go checks on external threads without complex setup. The hardened construction provides durability and preserves the gauge geometry under repeated use, which translates into consistent pass/fail decisions at the shop floor. Because the tool is intentionally simple to operate, inspection cycles are shortened and throughput is increased while maintaining traceable conformity to the established thread standard. Clear technical fit for quality assurance and incoming inspection Built from hardened gauge steel, the device resists wear and keeps a stable measuring form over time, reducing the need for frequent replacement. The design matches the M12×1 metric ISO fine thread form and the right-hand helix common in fasteners and fittings, making it suitable for batch sampling, first-article inspection and routine incoming checks. Using a certified, standard-based gauge helps to demonstrate that threaded components meet specified tolerances and supports internal quality documentation. Practical operation and reproducible results The ring gauge is intended for manual verification: the threaded part is engaged with the gauge until a defined tactile fit is reached, enabling an immediate go/no-go verdict. This simplicity reduces operator training overhead and minimises measurement uncertainty caused by complex instruments. When combined with a routine of clean threads and visual checks, the gauge yields repeatable results that support continuous production control and reduce the risk of assembly failures. For dependable thread verification with Metav IndustryLine quality, order the Metav IndustryLine thread ring gauge from Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com / +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: M315.212.4 GTIN: 4054469125671 Customs tariff number: 90173000 Facts Thread size: M12 x 1 mm Weight: 0.08 kg Tolerance class: 6g Standard: DIN 13 Special features Material: hardened gauge steel For metric ISO fine threads, right-hand Category: Gauges / Thread ring gauge FAQ What is this gauge used for? The thread ring gauge M12 x 1 mm is used to check external M12×1 metric ISO fine threads for compliance with DIN 13 tolerance class 6g. Which thread direction does the gauge support? This ring gauge is manufactured for right-hand threads and is suitable for standard right-hand M12×1 fittings and fasteners. How durable is the material? Made from hardened gauge steel, the gauge is designed for prolonged use in inspection routines while maintaining its measuring geometry. Can this gauge be used for production line checks? Yes, the compact form and simple operation make the gauge well suited to rapid in-line go/no-go inspections during production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1.25 Thread Go Gauge Right-Hand Metric ISO Fine Pitch DIN 13, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 tolerance class 6g and compact handling for fast, reliable pass/fail decisions on production lines. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M12 x 1.25 mm — Metav IndustryLine, DIN 13, 6g The thread ring gauge M12 x 1.25 mm is a hardened pass/fail ring for inspection of external metric ISO fine threads in production and quality control. Hardened gauge steel construction DIN 13 tolerance class 6g Right-hand metric fine thread fit Compact 0.08 kg for easy handling Ensure fast, unequivocal go/no-go decisions on the shop floor A hardened ring gauge provides a decisive, repeatable check for external threads; the M12 x 1.25 mm size and tolerance class 6g are specified for metric ISO fine threads to confirm conformity or identify rejects immediately. The robust construction in hardened gauge steel resists wear and maintains the inspection limit, which reduces measurement uncertainty and helps to avoid costly rework. The light mass of 0.08 kg also makes the gauge simple to handle during serial checks, enabling efficient throughput without sacrificing accuracy. Built for traceability and compliant inspection routines The gauge is manufactured to DIN 13 and marked for right-hand threads, so it integrates seamlessly into documented quality processes and inspection plans. The simple pass/fail nature supports quick visual decisions and can be recorded in quality logs as part of a statistical process control regime. The metal construction ensures dimensional stability, which improves repeatability across repetitive checks and supports decision-making in both production and incoming inspection. Practical durability and what it means for daily use Made from hardened gauge steel, the ring gauge withstands normal workshop wear and preserves the inspection limit over many cycles, meaning fewer tool replacements and consistent results. The adherence to DIN standards and a defined tolerance class simplifies communication with suppliers and inspectors and avoids ambiguity about acceptance criteria. For applications that demand clear go/no-go verification of metric fine threads, this gauge offers a straightforward and low‑effort solution that focuses on reliable outcomes rather than complex measurement procedures. For reliable thread control using the Metav IndustryLine gauge, contact Metav Werkzeuge for tailored application guidance quoting SKU M315.212.5 Technical Data Article number: M315.212.5 GTIN: 4054469125688 Customs tariff number: 90173000 Facts Thread size: M12 x 1.25 mm Pitch: 1.25 mm Tolerance class: 6g Weight: 0.08 kg Special features Material: hardened gauge steel Standard: DIN 13 Thread hand: right-hand Application: external metric ISO fine threads FAQ What is the intended use of this ring gauge? This ring gauge is designed for go/no-go inspection of external metric ISO fine threads, specifically M12 x 1.25 mm, to confirm conformity with DIN 13 and tolerance class 6g. How does the tolerance class 6g affect acceptance criteria? Tolerance class 6g defines the dimensional limits for an external thread; the ring gauge is manufactured to that class so a pass indicates the thread is within the specified acceptance range. Is the gauge suitable for serial production checks? Yes, the hardened gauge steel construction and compact weight make it appropriate for frequent pass/fail checks in serial production and incoming inspection. What maintenance is required to keep the gauge reliable? Routine cleaning and protection from abrasive contamination will preserve the gauge. Periodic verification against a master or calibration standard is recommended to ensure ongoing conformance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1.5 Limit Thread Plug Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Reliable limit inspection for metric ISO fine threads combines hardened gauge steel construction and DIN 13, 6H tolerance for consistent pass/fail checks; the compact, lightweight 0.09 kg design speeds handling on the shop floor. Order the limit thread plug gauge directly via Metav Werkzeuge or consult our advisors if required. Limit thread plug gauge M12 x 1.5 (right-hand) — Metric ISO fine thread, hardened gauge steel (Metav IndustryLine) Limit thread plug gauge M12 x 1.5 (right-hand) is a precision inspection tool for fast go/no-go testing of metric ISO fine threads in production and incoming inspection. Limit gauge M12 x 1.5, right-hand Hardened gauge steel, DIN 13 6H Lightweight 0.09 kg for easy handling Fast, reliable inspection that keeps production moving The limit thread plug gauge offers immediate, objective verification of thread form with a clear go/no-go result, reducing downtime for measurement and rework. Built to the DIN 13, 6H specification, this gauge is suitable for metric ISO fine threads and supports quick conformity checks at process control points. The go/no-go principle simplifies decision-making on the line: a pass confirms compliance at the nominal class, a fail indicates corrective action is required. This direct approach improves throughput and cuts sorting time without complex set‑ups. Compact form that improves shop-floor ergonomics A compact inspection tool with a 0.09 kg mass, the plug gauge is easy to position and manoeuvre even in confined assemblies or on rotating fixtures. The slim profile and modest weight reduce operator fatigue and allow rapid sequential checks, supporting shorter cycle times and steadier production rates. Its simplicity supports both manual bench inspection and quick checks at machines, making robust thread control accessible where speed and repeatability matter. Hardened construction for consistent, repeatable results Manufactured from hardened gauge steel, the gauge retains thread form under routine use and preserves measuring integrity over many inspection cycles. Conformity to DIN 13 and the 6H tolerance class ensures the thread profile matches the expected fit for mating parts, helping to avoid assembly issues. As a shop-floor tool for final checks, the device complements laboratory measurement equipment by providing fast, reproducible pass/fail control that prevents defective components from progressing through the process. Contact Metav Werkzeuge to discuss the Metav IndustryLine limit thread plug gauge or to request application advice; call +49 2822 7131930 or email info@metav-werkzeuge.com for prompt assistance. Technical data SKU: M315.012.6 GTIN: 4054469122366 Tariff number: 90173000 Weight: 0.09 kg Thread size: M12 x 1.5 Handedness: right-hand Standard: DIN 13, 6H Core specifications Nominal thread: M12 x 1.5 Tolerance class: 6H (DIN 13) Mass: 0.09 kg Category: Gauges / Thread plugs Materials and features Hardened gauge steel Metric ISO fine thread Suitable for go/no-go pass/fail inspection Category paths: Messstifte; Lehren FAQ What is the primary use of this plug gauge? The limit thread plug gauge is designed for go/no-go verification of M12 x 1.5 metric ISO fine threads to confirm conformity with DIN 13, 6H during production and incoming inspection. Is the gauge suitable for right-hand threads only? Yes, this specific plug gauge is manufactured for right-hand metric threads; for left-hand checks a corresponding left-hand gauge is required. What material is the gauge made from and why does that matter? The device is made from hardened gauge steel, which maintains thread form and dimensional stability during repetitive use, ensuring consistent inspection results. How does the gauge help reduce inspection time on the shop floor? By providing an immediate pass/fail result for the thread form, the gauge removes the need for time-consuming dimensional analysis, speeding up decision-making and reducing handling time. Can this gauge be used for final assembly checks? Yes; as a go/no-go instrument the gauge is appropriate for final checks to ensure mating parts will assemble correctly when the thread passes the established tolerance class. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1.5 Thread Ring Gauge Go, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
Take advantage of precise, standards‑compliant thread inspection combined with durable, hardened construction for reliable production release. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go thread ring gauge M12 x 1.5 mm — thread verification gauge, DIN 13, Metav IndustryLine The Go thread ring gauge M12 x 1.5 mm is intended for fast verification of M12 metric ISO fine threads (right‑hand), suitable for workshop inspection and production quality control DIN 13 compliance for metric ISO fine threads Hardened gauge steel for extended wear resistance Right‑hand M12 × 1.5 go gauge Compact 0.11 kg design for straightforward handling Proven accuracy for inline thread verification The ring acts as a direct, binary check for thread acceptability: the Go variant confirms that a thread meets the minimum major and pitch diameter requirements specified in DIN 13 with tolerance class 6g. Constructed from hardened gauge steel, the component resists wear and maintains dimensional stability during repetitive use, which reduces reject rates and supports consistent assembly processes. Using a physical limit gauge simplifies inspection decisions in series production and shortens cycle times compared with purely visual checks. Built for workshop efficiency and traceable stock control With a compact mass of 0.11 kg and the simple pass/fail principle, the gauge integrates easily into inspection stations and gauging benches. The right‑hand orientation and M12 x 1.5 sizing match common metric fine‑thread applications in machine building and maintenance. Traceability is supported by the visible SKU and GTIN, facilitating stock rotation and audit trails; the robust design minimises downtime from gauge replacement and keeps throughput steady on the shop floor. Reliable material and normative alignment for quality assurance Made from gauge steel, hardened, the ring provides dimensional endurance in production environments. Conformity to DIN 13, 6g ensures that acceptance criteria align with international metric ISO thread standards, supporting interchangeability and assembly reliability in supplied parts. The simple functional principle requires no electronics or adjustment, offering an economical, low‑maintenance solution for final checks and go/no‑go assessments in quality control workflows. For dependable thread verification choose the Metav IndustryLine Go ring gauge M12 x 1.5; contact Metav Werkzeuge in Emmerich for technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.112.6 GTIN: 4054469124032 Weight: 0.11 kg Material: gauge steel, hardened Standard: DIN 13, 6g Thread: M12 x 1.5 mm, right‑hand Facts Customs tariff number: 90173000 eCl@ss: 21170214 Special features Go gauge for metric ISO fine threads Right‑hand orientation Compact, low‑mass design for easy handling Manufacturer: Metav IndustryLine FAQ What does a "Go" ring gauge check? The Go ring gauge verifies that an M12 x 1.5 thread falls within the minimum material limits defined by the standard; the Metav IndustryLine Go ring gauge M12 x 1.5 (SKU M315.112.6) must pass smoothly over the thread to indicate acceptance. Can this gauge be used in serial production? Yes, the hardened construction and straightforward pass/fail operation make this ring suitable for repetitive use in production inspection workflows and final checks. Which standard does this gauge comply with? This ring gauge is manufactured to DIN 13 with tolerance class 6g, matching metric ISO fine‑thread specifications for interchangeability. How should the gauge be stored to maintain accuracy? Store the gauge dry and protected from mechanical damage; the hardened steel resists wear but benefits from clean, controlled storage to preserve the calibrated form. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1.75 Thread Gauge Ring Right-Hand Metric ISO Pitch DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and strict DIN 13 (6g) tolerance to ensure consistent thread conformity for M12 x 1.75 metric ISO threads; for reliable quality control and quick decision-making, order directly via Metav Werkzeuge or consult our specialists for application advice. M315.212 Thread Ring Gauge M12 x 1.75 — Hardened gauge steel, DIN 13 (6g) — Metav IndustryLine M315.212 is a compact thread ring gauge for verifying conformity of external metric ISO threads in production and incoming inspection, specified for right‑hand threads. Hardened gauge steel construction DIN 13 tolerance class 6g For M12 x 1.75 metric ISO threads Right‑hand thread verification Ensure interchangeability and conformance in production The M315.212 ring gauge checks manufactured external threads against the DIN 13 standard and the 6g tolerance class, providing fast verification of dimensional conformity. Using a purpose‑made gauge eliminates costly rework by identifying out‑of‑tolerance parts at the point of manufacture. The clear standard reference simplifies communication between workshop, quality assurance and procurement, so part acceptance or rejection follows established industrial norms without ambiguity. Durable design for repetitive inspection tasks Constructed from hardened gauge steel, the ring has been finished to offer stable measuring edges and long service life under frequent use. Hardened materials resist wear from repetitive contact with threaded parts, keeping the control limits predictable over many cycles. The compact, single‑piece design minimises play and supports repeatable checks during short production runs or batch sampling, reducing measurement variation caused by instrument instability. Seamless integration into quality workflows The gauge is intended for routine quality control and is suitable for production floors, toolrooms and metrology benches where quick verification is required. Clear identification (size M12 x 1.75) and the conformity marking to DIN 13 (6g) make the part straightforward to document in inspection reports and process control charts. Lightweight and simple to use, the device complements statistical sampling procedures and supports consistent traceability across manufacturing steps. Select the Metav IndustryLine M315.212 for dependable DIN 13 checks — contact Metav Werkzeuge in Emmerich for tailored technical advice from our quality team Technical data Article number: M315.212 GTIN: 4054469125640 Name/Label: Gewinde‑Lehrring M12 x 1,75 mm (thread ring gauge) Facts Size: M12 x 1.75 Weight: 0.1 kg Tariff number: 90173000 Standard: DIN 13, 6g Special features Material: hardened gauge steel For metric ISO standard threads Right‑hand thread configuration Category: Gauges / Ring gauges (inspection) FAQ What thread size does this gauge check? The M315.212 thread ring gauge is specified for M12 x 1.75 metric ISO external threads. Which tolerance class and standard are used for verification? Checks are made to DIN 13 with tolerance class 6g, as stated for the M315.212 ring gauge. What material is the gauge made from? The M315.212 is manufactured from hardened gauge steel, chosen for wear resistance and stable control edges. Is this gauge suitable for right‑hand threads only? Yes, the M315.212 is produced for right‑hand metric ISO threads as indicated in the product specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1.75 Thread Go Gauge For Metric ISO Regular Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a hardened gauge-steel design and strict conformity to DIN 13 (6H) for reliable in-process thread checks; the compact M12 × 1.75 limit plug gauge speeds up inspection and lowers reject rates. Order the limit plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug gauge M12 × 1.75 — Metav IndustryLine A limit thread plug gauge M12 × 1.75 for checking right-hand metric ISO threads in production, incoming inspection and assembly control. Hardened gauge steel construction For M12 × 1.75 metric ISO threads Conforms to DIN 13, tolerance 6H Compact weight 0.09 kg for easy handling Consistent pass/fail decisions for threaded parts A precision-made limit plug gauge provides immediate, unambiguous verification at the production line: the GO fit confirms acceptable internal threads while the NO‑GO catches out‑of‑tolerance conditions. Built to DIN 13 with tolerance class 6H, this gauge translates the abstract standard into a concrete check that prevents faulty assemblies and reduces rework. The design principle is simple yet effective for quality assurance and process control — a tactile, binary test that integrates seamlessly into routine inspection sequences. Faster checks through ergonomic handling The balance of minimal mass and solid construction makes repetitive gauging straightforward. At 0.09 kg the tool is easy to position and manoeuvre, shortening cycle times during batch inspections and speeding up line-side sampling. The hardened gauge steel body resists wear under regular use, so inspection intervals stay stable and the gauge retains its limit dimensions longer. For inspection teams this means fewer interruptions, steadier output and a measurable improvement in throughput. Robust design for workshop and laboratory use Manufactured for right-hand metric ISO threads, the plug gauge offers durable service in both workshop and inspection-laboratory environments. The right-hand thread geometry and clear limit form ensure consistent engagement with test components, supporting traceable quality records when paired with standard inspection procedures. Designed as a practical production aid rather than a precision-measuring instrument, it complements measuring equipment by providing quick go/no-go assessment before more detailed metrology is applied. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine limit plug gauge M12 × 1.75 can be integrated into your inspection workflow; our Emmerich‑based advisers will recommend the right setup for consistent thread control. Technical Data Article number: M315.012 GTIN: 4054469122311 Weight: 0.09 kg Facts Thread size: M12 × 1.75 Tariff number: 90173000 Standard: DIN 13, 6H Special features Material: hardened gauge steel Right-hand metric ISO thread Category: Limit thread plug gauge FAQ How is this gauge used in production inspections? This limit plug gauge is used as a tactile GO/NO‑GO check: the GO condition verifies acceptable internal threads while the NO‑GO indicates rejection; the M12 × 1.75 Metav IndustryLine plug gauge provides fast, on‑the‑spot results. Which standard and tolerance does the gauge follow? The tool conforms to DIN 13 with tolerance class 6H, which defines the acceptable internal thread limits for standard metric ISO threads. Is the M12 × 1.75 plug gauge suitable for workshop use? Yes, the Metav IndustryLine limit plug gauge is robustly made from hardened gauge steel and designed for frequent use in workshop and inspection environments. What are the identifying details for ordering and traceability? Article number M315.012 and GTIN 4054469122311 identify the Metav IndustryLine limit plug gauge; weight is 0.09 kg for handling and shipping considerations. Does the gauge check left‑hand or right‑hand threads? This version checks right‑hand metric ISO threads with a nominal size of M12 × 1.75. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1.75 Thread Ring Gauge Go Right-Hand ISO Metric DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Benefit from a compact inspection tool that combines hardened gauge steel, precise DIN 13 / 6g tolerancing and a lightweight 0.13 kg design for fast, repeatable thread acceptance checks. Order the thread go ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Go Ring Gauge M12 x 1.75 mm — Go, DIN 13, 6g (Metav IndustryLine) A Thread Go Ring Gauge M12 x 1.75 mm designed for right‑hand metric ISO threads, ideal for rapid acceptance testing and inline quality checks in production environments Go ring gauge M12 x 1.75 mm Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Faster acceptance testing with traceable conformity The compact go ring gauge delivers a clear go/no‑go decision in seconds, supporting efficient throughput on the shop floor. Manufactured to DIN 13 with a 6g tolerance, the gauge provides objective evidence of thread conformity so process checks become quicker and less subjective. Using a dedicated ring for the nominal M12 x 1.75 mm size reduces setup time for repetitive inspections and helps maintain production rhythm with minimal operator training. Long service life through hardened construction Constructed from hardened gauge steel, the ring is built to resist wear and preserve the thread form over many cycles, which reduces the frequency of replacements and helps control long‑term inspection costs. The low mass of 0.13 kg makes handling straightforward during routine checks and minimises operator fatigue during extended use. Robust material choice and accurate machining ensure stable performance even under continuous shop‑floor conditions. Simple integration into quality workflows The ring gauge is supplied as a single, purpose‑built inspection tool that can be used on benches, in fixtures or as part of an incoming goods routine. Marked and traceable by SKU M315.112, it supports standardised routines and audit trails. For workshops aiming to harmonise their inspection methods, the gauge provides a reproducible reference for thread acceptance that complements torque, hardness and visual controls without adding complexity to the workflow. Contact Metav Werkzeuge to arrange supply of Metav IndustryLine inspection tools or to discuss suitability of this ring gauge for specific production or incoming‑inspection procedures Technical Data Article number: M315.112 GTIN: 4054469123981 Label: Thread Go Ring Gauge M12 x 1.75 mm (go) Core specifications Nominal size: M12 x 1.75 mm Tolerance: 6g Weight: 0.13 kg Tariff code: 90173000 Special features Type: Go ring gauge, right‑hand metric ISO thread Material: hardened gauge steel Standard: DIN 13 Category: Gauges / Inspection tools FAQ What does the "go" designation indicate for this gauge? The go designation means the ring is used to verify that a thread meets the minimum material and form requirements; the Thread Go Ring Gauge M12 x 1.75 mm passes acceptable parts and flags those that fail the acceptance dimension. Which standard and tolerance does the gauge follow? The ring conforms to DIN 13 with a tolerance class of 6g, ensuring compatibility with standard metric ISO thread production and inspection practices. Is the gauge suitable for heavy shop use? Yes. Made from hardened gauge steel, the gauge is designed for repeated use on the shop floor with good wear resistance and stable performance over many inspection cycles. How is the gauge identified for inventory and audit purposes? The item is identified by SKU M315.112 and GTIN 4054469123981, making it straightforward to track within quality systems and calibration records. Can this ring gauge be used for incoming inspection and in‑process checks? Absolutely; the compact design and clear pass/fail function make the ring suitable for both incoming goods inspection and inline checks during production, supporting consistent quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12×0.75 mm Limit Thread Plug Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Combine hardened gauge steel construction, DIN 13 tolerance 6H and the compact M12 x 0.75 format for fast, repeatable go/no-go thread checks; order the gauge directly via Metav Werkzeuge or contact their consultants for specific batch or inspection requirements. Limit thread plug gauge M12 x 0.75 mm — right-hand — Metav IndustryLine The Limit thread plug gauge M12 x 0.75 mm is a precision go/no-go instrument designed for rapid verification of metric ISO fine threads in production and quality inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H M12 x 0.75 metric fine thread Right-hand thread verification Compact format for workshop use Fast, unambiguous thread verification for production lines A limit thread plug gauge offers a straightforward binary result that removes ambiguity from routine checks: the calibrated "go" end confirms correct internal thread form and size, while the "no-go" end detects oversize or out-of-tolerance threads. Built around the M12 x 0.75 dimension and the DIN 13 specification with 6H tolerance, this instrument streamlines in-process inspections and reduces rework. The go/no-go principle minimises interpretation time, enabling quicker decisions on acceptance or corrective action and directly supporting lean production goals. Durable construction that preserves accuracy under shop conditions Manufactured from hardened gauge steel, the limit gauge resists wear from frequent use, so measurement certainty is maintained over many inspection cycles. Hardened surfaces and careful finishing reduce the risk of damage to the workpiece while ensuring stable fit between gauge and thread. The right-hand configuration matches standard thread direction in most assemblies, and the compact design keeps handling simple on the shop floor. Together, these attributes deliver consistent performance and lower total inspection cost through extended service life. Compliance and traceability for quality systems The limit thread plug gauge is produced to meet recognised standards, referenced as DIN 13 with a 6H tolerance class, ensuring compatibility with metric ISO fine-threaded components. Using a standardised gauge facilitates consistent acceptance criteria across suppliers and production stages and supports traceability in quality documentation. Where formal records are required, the gauge's SKU and GTIN can be logged alongside inspection results to maintain an auditable verification trail that aligns with internal quality procedures and external audits. For assured thread verification and procurement support, contact Metav Werkzeuge — Metav IndustryLine gauges and technical advisors are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data SKU: M315.012.3 GTIN: 4054469122335 Material: gauge steel, hardened Standard: DIN 13, tolerance 6H Thread: M12 x 0.75 mm Hand: right-hand thread Category: thread gauges / limit plug gauge Core dimensions & tolerances Thread size: M12 x 0.75 mm Pitch: 0.75 mm Tolerance class: 6H (DIN 13) Tariff number: 90173000 Special features Go/no-go (limit) verification principle Wear-resistant hardened construction Designed for metric ISO fine threads Compact, workshop-friendly format FAQ How does the limit thread plug gauge indicate pass or fail? The limit thread plug gauge M12 x 0.75 mm (Metav IndustryLine, SKU M315.012.3) uses a go end that must enter the threaded part and a no-go end that must not; this simple pass/fail result removes ambiguity during inspection. Is this gauge suitable for production-line sampling of fine threads? Yes, the M12 x 0.75 limit plug gauge is intended for rapid verification of metric ISO fine threads and is well suited to routine production sampling and first-article inspection. What standard does the gauge comply with and why does it matter? The gauge conforms to DIN 13 with tolerance class 6H; using a standardised gauge like this ensures compatibility with metric ISO thread requirements and supports consistent acceptance criteria across suppliers. Will frequent use wear the gauge and affect measurements? The limit thread plug gauge is made from hardened gauge steel to improve wear resistance; regular inspection and proper handling preserve accuracy and extend service life. Can the instrument be documented for traceability in quality records? Yes, the M12 x 0.75 limit gauge (Metav IndustryLine, SKU M315.012.3) can be referenced by its SKU and GTIN in inspection records to maintain traceability within quality management systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12×0.75 Thread Ring Gauge Right-Hand ISO Metric Fine Pitch DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise thread verification with M12 x 0.75 geometry and hardened gauge steel for reliable production control; order the inspection ring directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M12 x 0.75 — Right‑hand metric ISO fine thread, DIN 13 (Metav IndustryLine) The Thread ring gauge M12 x 0.75 is a hardened inspection ring designed for checking right‑hand metric ISO fine threads to DIN 13 standards in industrial quality control. M12 x 0.75 metric fine thread DIN 13 tolerance 6g Hardened gauge steel construction Compact 0.08 kg inspection ring Precise verification that integrates with production workflows The inspection ring serves as a concise, objective check for fine‑pitch threads, delivering repeatable results that support in‑process quality control. Manufactured from hardened gauge steel, the ring maintains its form under regular use, which preserves dimensional accuracy and minimises rework. Compliance with DIN 13 and the specified 6g tolerance provides a clear pass/fail criterion for threaded parts, simplifying acceptance checks on the shop floor and in the metrology laboratory. Clear benefits for inspection and documentation Used in incoming inspection or during production sampling, the ring gauge reduces ambiguity in assessment and accelerates throughput by avoiding subjective measurement methods. The compact mass of 0.08 kg and simple ring form factor make it easy to handle and integrate into inspection jigs or fixtures. When recorded in quality logs, measurements obtained with this gauge contribute to traceable documentation and consistent production decisions, supporting efficient defect management and faster corrective actions. Durable design for routine workshop conditions Constructed from hardened gauge steel and intended for right‑hand M12 fine threads, the ring gauge resists wear while providing stable geometry over many cycles. The small footprint and modest weight support ergonomic handling and storage, while robust material selection reduces the need for frequent replacement. As part of the Metav IndustryLine range, the ring complements a broader set of inspection tools that together help maintain process reliability and product conformity. For robust thread inspection backed by Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for advice, availability or delivery details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.212.3 SKU: M315.212.3 GTIN: 4054469125664 Weight: 0.08 kg Thread size: M12 x 0.75 Material: Gauge steel, hardened Standard: DIN 13, 6g Tariff number: 90173000 ECLASS: 21170214 Facts Intended use: Inspection of metric ISO fine threads Thread direction: Right‑hand Category: Gauges / Inspection tools Label: Gewinde‑Lehrring M12 x 0,75 mm Aussch. DIN 13, f. metr. ISO‑Feingewinde, rechts Special features Hardened gauge steel construction Compact and lightweight format Suitable for fine‑pitch M12 threads Packaged weight indication 0.08 kg Manufacturer range: Metav IndustryLine FAQ What thread size does this ring gauge check? The ring gauge checks M12 x 0.75 right‑hand metric ISO fine threads and is designed to conform to DIN 13 tolerances. Which standard and tolerance class apply to the gauge? The tool is specified to DIN 13 with a 6g tolerance class for metric ISO fine threads. What material is the gauge made from? The ring gauge is manufactured from hardened gauge steel, chosen for wear resistance and long‑term stability. How heavy is the inspection ring? The inspection ring has a mass of 0.08 kg, making it compact and easy to handle in inspection routines. What type of applications suit this ring gauge? This ring gauge is intended for shop‑floor and laboratory checks of fine‑pitch threaded components, providing a rapid, repeatable pass/fail reference for production inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12×1 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13, 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise, standard‑compliant thread inspection and robust material selection to reduce rework and speed up quality checks; order the gauge directly via Metav Werkzeuge or consult their specialists for application advice. Thread ring gauge M12 x 1 — Go gauge, DIN 13, 6g (Metav IndustryLine) The Thread ring gauge M12 x 1 is a right‑hand go gauge for fast verification of metric ISO fine external threads to DIN 13 with tolerance 6g. Go gauge for M12 x 1 ISO fine thread Conforms to DIN 13, tolerance 6g Right‑hand thread checking Hardened gauge steel for long life Ensure conformity with a single pass This go gauge provides an immediate, binary check that external threads fall within the permitted maximum material limits defined by DIN 13. Used in production and incoming inspection, the device gives a clear pass result when the threaded part assembles without interference; parts that do not fit the gauge require rework or rejection. The concise inspection method reduces cycle time and simplifies operator training while maintaining measurable quality control. Speed up throughput with reliable acceptance testing Designed for routine use on the shop floor, the ring gauge converts dimensional criteria into a quick go/no‑go decision, avoiding time‑consuming measurements when the requirement is only conformity. The gauge is specified for metric ISO fine thread size M12 x 1, right‑hand, and the tolerance class 6g aligns with common production tolerances in mechanical engineering. This direct approach supports faster throughput and fewer stoppages on assembly lines. Built for durability and repeatability Manufactured from hardened gauge steel, the ring resists wear and preserves its geometry under repeated contact with external threads. The material choice prolongs service life and keeps inspection results reproducible over many cycles, reducing the need for frequent replacement. The compact, low‑mass construction (approx. 0.07 kg) facilitates handling and storage on a busy workshop bench while maintaining the stiffness necessary for reliable checking. Traceability and stock identification made simple Each unit is supplied with clear identification for inventory and traceability: SKU M315.112.4 and GTIN 4054469124018 allow straightforward ordering and record keeping. Compliance with the DIN 13 standard and the specified tolerance class 6g supports process documentation and audit trails, helping to demonstrate that thread acceptance criteria were consistently applied. Contact Metav Werkzeuge to discuss supply of the M12 x 1 go gauge from Metav IndustryLine and to arrange prompt delivery from Emmerich. Technical data SKU: M315.112.4 GTIN: 4054469124018 Weight: 0.07 kg Material: Gauge steel, hardened Designation: Thread ring gauge M12 x 1 mm go, DIN 13, metric ISO fine thread, right‑hand Facts Size: M12 x 1 Tolerance class: 6g Thread direction: Right‑hand eClass: 21170214 Customs tariff number: 90173000 Special features Go (acceptance) ring gauge For metric ISO fine threads Complies with DIN 13 Robust, hardened construction Category: Gauges / Ring gauges FAQ What does the go ring gauge check? The go ring gauge verifies that an external thread fits within the maximum material condition specified for that thread; the Thread ring gauge M12 x 1 confirms whether a part meets the acceptance limit for an M12 x 1 metric ISO fine thread. Is this suitable for left‑hand threads? No, this particular item is a right‑hand gauge; for left‑hand threads a purpose‑made left‑hand ring gauge would be required rather than the M12 x 1 right‑hand version. Which standard and tolerance does the gauge follow? The gauge is manufactured to DIN 13 and inspects threads to tolerance class 6g, which corresponds to common production tolerances for metric ISO fine threads. What material is used and how does that help? Made from hardened gauge steel, the ring retains form under frequent use and offers extended service life compared with softer materials; the M12 x 1 ring remains accurate for many inspection cycles. How is the gauge identified for stock and procurement? The product is listed with SKU M315.112.4 and GTIN 4054469124018, enabling precise ordering and inventory control for the ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12×1.25 Thread Go Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of precise thread acceptance through the combination of DIN 13 (6g) tolerance and hardened gauge steel, together with a compact, easy‑to‑handle design. Order the thread gauge directly via Metav Werkzeuge or consult our specialists for application guidance. Thread Gauge Ring M12 x 1.25 mm — Go ring for metric ISO fine external threads, DIN 13 6g, Metav IndustryLine A Thread Gauge Ring M12 x 1.25 mm intended for rapid verification of metric ISO fine external threads in production environments and quality control. DIN 13, tolerance 6g for metric ISO threads Hardened gauge steel for long service life Compact 0.11 kg for easy handling Precision Go ring for thread acceptance Consistent acceptance testing for every batch The ring functions as a Go ring for external threads and confirms that an M12 x 1.25 mm thread meets the DIN 13 acceptance class 6g. Using a dedicated gauge eliminates subjective judgements and ensures repeatable, measurable decisions on pass or fail, which reduces rework and scrap. Compatibility with the metric ISO fine thread system means inspection results are comparable across suppliers and production stages, supporting reliable process control. Built to resist wear and retain accuracy Manufactured from hardened gauge steel, the gauge offers high resistance to abrasion and maintains its contact geometry through repeated cycles. The low mass (0.11 kg) and compact form factor make it straightforward to handle on the shop floor or at an incoming inspection station, while the robust material preserves the Go condition required for acceptance testing. This combination of durability and ergonomics contributes to steady throughput and fewer interruptions for replacement. Easy integration into quality workflows Designed for routine inline checks and batch sampling, the ring supports quick decision‑making without complex setup. The standardised acceptance class (6g) and the clear designation as a Go ring enable seamless use in production, incoming inspection and final control plans. Traceable item identification (GTIN) and conformity with recognised thread standards help maintain documentation and audit trails common to modern quality systems, while the manufacturer’s European supply base provides a pragmatic logistics advantage. For dependable routine thread verification choose the Metav IndustryLine ring — contact Metav Werkzeuge for tailored technical advice and prompt supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data SKU: M315.112.5 GTIN: 4054469124025 Weight: 0.11 kg Thread size: M12 x 1.25 mm Standard: DIN 13, 6g Material: hardened gauge steel Right-hand thread Tariff number: 90173000 Facts Weight: 0.11 kg Pitch: 1.25 mm Tolerance class: 6g GTIN: 4054469124025 Special features Go ring for external metric ISO fine threads Hardened gauge steel for wear resistance DIN 13 compatible acceptance class 6g Compact handling weight for production lines FAQ What does the Go ring check on an M12 x 1.25 thread? The Go ring verifies that the external thread meets the dimensional limits of the metric ISO fine thread and the DIN 13 acceptance class 6g for pass/fail decisions. Is the ring suitable for use in high-volume inspection? Yes, the hardened gauge steel construction and compact mass of the ring support repetitive handling and rapid acceptance checks in production environments. Does the gauge include a calibration certificate? No calibration certificate is included by default; any calibration status would be specified in the product listing or supplied separately. Which materials can the gauge be used to inspect? The gauge inspects thread geometry on external threads produced in metals commonly used for M12 x 1.25 components, including stainless and alloy steels, where dimensional verification is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12×1.25 Thread Go/No-Go Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Benefit from fast, unambiguous thread acceptance for M12×1.25 metric ISO fine threads, produced to DIN 13, 6H and made from hardened gauge steel for consistent shop‑floor results; order directly via Metav Werkzeuge or contact our consultants for application advice. Limit Thread Plug Gauge M12×1.25 — Go/No‑Go plug gauge for metric ISO fine threads, hardened gauge steel (Metav IndustryLine) The Limit Thread Plug Gauge M12×1.25 is a right‑hand Go/No‑Go gauge designed for rapid verification of M12×1.25 metric ISO fine threads in production and inspection environments. Go/No‑Go design for fast inspection For metric ISO fine thread M12×1.25 Hardened gauge steel construction Manufactured to DIN 13, 6H tolerance Rapid, unequivocal thread acceptance for production control The Go/No‑Go design delivers immediate pass/fail results, reducing inspection time and limiting subjective judgement during thread checks. Built to DIN 13 with a 6H tolerance, this plug gauge provides a standardised reference for thread quality that integrates directly into incoming inspection and in‑process checks. The clear acceptance criteria from the Go/No‑Go concept minimise rework and help maintain consistent assembly performance across batches. Robust construction for lasting shop use Manufactured from hardened gauge steel, the gauge resists wear and retains form accuracy under frequent handling, ensuring stable measurements over prolonged service life. The compact, right‑hand configuration suits congested workstations and hand inspections; light weight (approx. 0.09 kg) reduces operator fatigue during repetitive checks. The material choice supports repeatability, so trend shifts in production can be identified earlier rather than later. Simple integration into quality procedures and documentation The gauge serves as a practical control element within a documented quality workflow: use it for final acceptance, production sampling or routine machine set‑up checks. Traceability is supported by clear identifiers, enabling straightforward recording in inspection logs and quality management systems. As a standardised plug gauge for metric ISO fine thread verification, it complements calibration schedules and helps demonstrate adherence to defined tolerances in audit situations. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine Limit Thread Plug Gauge M12×1.25 can be integrated into existing inspection routines and to arrange shipment from our Emmerich quality hub. Technical Data Article number: M315.012.5 GTIN: 4054469122359 Weight: 0.09 kg Facts Thread: M12 x 1.25 Direction: Right‑hand Standard: DIN 13, 6H Material: hardened gauge steel Special features Go/No‑Go plug gauge Category: Gauges / Plug gauges Tariff number: 90173000 FAQ What tolerance standard does this plug gauge follow? The Limit Thread Plug Gauge M12×1.25 is manufactured to DIN 13 with a 6H tolerance class, providing a recognised reference for metric ISO fine threads. Is the gauge suitable for routine shop‑floor checks? Yes. The hardened gauge steel construction and compact design make the Metav IndustryLine plug gauge suitable for frequent in‑process and incoming inspection tasks. How is the gauge marked for traceability? The gauge is identifiable by SKU M315.012.5 and GTIN 4054469122359 to support traceable documentation within quality records. Can this gauge detect minor form deviations in internal threads? The Go/No‑Go format verifies acceptance to the specified tolerance band; significant form errors that affect fit will result in a No‑Go indication and should be followed up with detailed measurement equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12×1.5 Thread Ring Gauge Go, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise thread verification and durable construction for reliable quality control. With a hardened gauge-steel body and conformity to DIN 13 (6g), the gauge provides fast, repeatable acceptance checks for metric fine internal threads. Order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M12 x 1.5 mm — hardened gauge steel, DIN 13 (6g) — Metav IndustryLine A thread ring gauge M12 x 1.5 mm designed for quick, accurate checking of metric ISO fine internal threads in production and inspection environments Hardened gauge-steel construction Conforms to DIN 13, tolerance class 6g For metric ISO fine threads M12 x 1.5 Precision where it matters: consistent acceptance testing The ring is manufactured from hardened gauge steel, which maintains dimensional stability under repeated handling and resists wear during serial checks. That material choice, combined with manufacturing to DIN 13 and a 6g tolerance class, ensures the component functions as a reliable go gauge for metric ISO fine threads. For production lines, this translates into fewer false rejects and faster cycle times in the inspection stage, because measurements are standardised and immediately comparable across shifts and machines. Practical benefits for the workshop and production floor As a dedicated verification tool, the gauge removes ambiguity from pass/fail decisions: a precise fit confirms thread conformity, while the inability to engage signals non-conformance. The compact, single-piece design reduces handling complexity and shortens inspection routines; typical applications include first-article inspection, incoming goods checks and batch sampling. The robust construction delivers long service life, lowering the total cost of ownership compared with ad hoc measurement methods and frequent replacements. Traceability and integration into quality workflows Although primarily a tactile verification device, the ring gauge supports traceable quality procedures by supplying repeatable, standards-based checks that can be recorded in inspection reports. The simple go/no-go principle accelerates operator training and reduces interpretation errors. Where documented proof is required, the gauge’s compliance with established thread standards provides a clear audit trail for audits and supplier control, supporting consistent output and customer confidence. For production-proven thread inspection, request the Metav IndustryLine M12 thread ring gauge from Metav Werkzeuge — contact our Emmerich-based specialists for tailored advice and fast delivery Technical data Article number: M315.212.6 SKU: M315.212.6 GTIN: 4054469125695 Tariff number: 90173000 Facts Thread size: M12 x 1.5 Tolerance/class: 6g Weight: 0.08 kg Special features Material: gauge steel, hardened Standard: DIN 13 Thread direction: right-hand Category: thread ring gauge for metric ISO fine thread inspection FAQ Is this ring gauge suitable for fine metric threads only? The ring gauge is designed specifically for metric ISO fine threads with the M12 x 1.5 specification and is manufactured to match that application. What does the 6g specification mean for inspection? The 6g designation refers to the tolerance class according to the thread standard; it defines the acceptable clearance and ensures the gauge represents the intended fit for the internal thread being tested. How should the gauge be used during routine checks? Use the ring gauge as a go/no-go acceptance tool: the gauge should assemble smoothly onto the workpiece if the internal thread meets the specified limit; resistance or jamming indicates non-conformance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com