Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M14×0.5 Thread Plug Gauge Right-Hand ISO Fine Pitch DIN 13, Hardened Gauge Steel, 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 (6g) conformity, hardened gauge steel construction and precise M14×0.5 sizing for reliable thread inspection and fewer production rejects; order the thread gauge ring directly via Metav Werkzeuge or consult our advisers for application support. Thread Gauge Ring M14×0.5 — Limit Gauge for Metric ISO Fine Threads (Metav IndustryLine) The Thread Gauge Ring M14×0.5 is a hardened limit gauge designed for quick verification of right‑hand metric ISO fine threads in production and incoming inspection environments. Hardened gauge steel construction Conforms to DIN 13 tolerance 6g For metric ISO fine thread M14×0.5 Right‑hand limit gauge for go/no‑go checks Reduce rework with standardised thread verification Consistent thread inspection removes uncertainty from assembly and machining. The M14×0.5 ring, produced to DIN 13, 6g, gives a clear pass/fail result for metric ISO fine threads, enabling rapid decisions on batches without time‑consuming measurements. Using a dedicated limit gauge reduces subjective assessment and limits the risk of assemblies failing due to undersized or incorrectly formed threads, which in turn lowers scrap rates and rework costs. Durable design for repeatable checks Made from hardened gauge steel, this ring is engineered for frequent use on the shop floor. The hardened material resists wear and preserves the reference form over many inspection cycles, so calibrations remain valid for longer and results stay repeatable. A compact, solid design ensures handling is straightforward during rapid inspections and minimises deformation that could otherwise affect accuracy. Integrates into production and QA routines As a simple go/no‑go device, the ring fits seamlessly into production lines, quality stations and incoming goods checks. Its right‑hand configuration suits standard threaded components and speeds up routine checks without the need for specialised measuring equipment. The clear acceptance criterion provided by a limit gauge supports efficient process control and shortens inspection times. Why Metav IndustryLine supplies matter Sourcing from Metav IndustryLine adds a layer of supply‑chain reliability: components are selected for workshop use and backed by a European distribution hub that acts as a quality filter. This provenance supports traceability and dependable replenishment, particularly important for high‑volume or regulated production environments where consistent gauge performance is essential. Contact Metav Werkzeuge today to obtain the Metav IndustryLine Thread Gauge Ring M14×0.5 for dependable metric ISO fine thread inspection; technical advisers at Metav Werkzeuge can confirm suitability for the application — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.214.2 GTIN: 4054469125749 Manufacturer: Metav IndustryLine Thread: M14×0.5 Pitch: 0.5 mm Tolerance: 6g Weight: 0.08 kg Tariff number: 90173000 Material: hardened gauge steel Standard: DIN 13 Thread direction: right‑hand Application: metric ISO fine threads FAQ What thread size does this gauge check? The thread gauge ring checks M14×0.5 metric ISO fine threads and is intended for right‑hand threaded parts. To which tolerance does the ring conform? This limit gauge is manufactured to DIN 13 with a 6g tolerance class for reliable go/no‑go verification. What material is the gauge made from? The ring is produced from hardened gauge steel, chosen for wear resistance and long service life in inspection roles. Is the ring suitable for production line checks? Yes. The ring is designed as a limit gauge for quick pass/fail inspection of metric ISO fine threads in production and incoming inspection. How is traceability ensured for this item? The product is supplied by Metav IndustryLine and is identified by article number M315.214.2 and GTIN 4054469125749 for inventory and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M14×1 Limit Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Handed, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of precise thread verification and durable construction: the hardened gauge steel body and conformity to DIN 13 (tolerance 6H) ensure reliable acceptance testing for metric fine threads. Order the gauge directly via Metav Werkzeuge or consult the technical team for application advice. Limit thread plug gauge M14 x 1 mm — metric ISO fine thread, right-hand (Metav IndustryLine) The Limit thread plug gauge M14 x 1 mm is a right‑hand limit gauge designed for fast, repeatable inspection of metric ISO fine threads in production and incoming‑inspection environments. M14 x 1 metric ISO fine thread Right-hand limit plug gauge, tolerance 6H Hardened gauge steel for long service life Ensure correct thread form and tolerance quickly This limit plug gauge gives an objective go/no‑go check for metric ISO fine threads, referenced to DIN 13 with tolerance class 6H. The construction serves as a rapid acceptance test: one side confirms conformity within the specified tolerance, while the opposite side checks the upper limit. The hardened gauge steel body preserves the thread profile and ensures repeatable results across numerous cycles, reducing uncertainty in routine inspections and supporting process stability on the shop floor. Durable design that reduces downtime Manufactured from hardened gauge steel, the gauge resists wear and maintains its form under regular handling, which lowers the need for frequent replacement. The compact, single‑piece design is suited to series testing and manual inspection stations where speed and robustness matter. By using a purpose‑made limit gauge rather than improvised measurement methods, inspection throughput is increased and scrap caused by undetected thread faults is reduced — an efficiency advantage for machining and assembly operations. Clear traceability and standards alignment The tool is specified for M14 x 1 mm threads and marked to indicate its tolerance class 6H, facilitating documentation and audit trails in quality systems. The use of a standardised limit gauge streamlines conformity checks against drawing requirements and simplifies communication between production, quality and purchasing departments. For organisations that maintain formal inspection records, the gauge provides an unambiguous pass/fail outcome that integrates easily with routine quality control procedures. Contact Metav Werkzeuge today for stock information and application guidance on the Metav IndustryLine limit thread plug gauge and to discuss suitability for specific production tasks. Technical data Article number: M315.014.4 GTIN: 4054469122434 Tariff number: 90173000 Eclass: 21170235 Facts Thread size: M14 x 1 mm Tolerance class: 6H Thread hand: Right‑hand Special features Material: gauge steel, hardened Type: Limit thread plug gauge Condition: Good Category: Gauges / Thread gauges FAQ What does the tolerance designation 6H mean for thread inspection? The tolerance class 6H indicates the internal thread tolerance applicable to metric ISO threads; the limit thread plug gauge is manufactured to that class so it checks conformity to the specified internal thread limits. Is the gauge suitable for production use on fine threads? Yes. The limit thread plug gauge M14 x 1 mm from Metav IndustryLine is intended for fast acceptance testing of metric fine threads in production and inspection settings. How is wear managed and how often should the gauge be checked? Wear is minimised by the hardened gauge steel construction; periodic verification against a master standard is recommended to maintain confidence in measurement results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M14×2 Thread Limit Plug Right-Hand For Metric ISO Thread, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of precise thread verification, hardened gauge‑steel durability and straightforward integration into inspection routines for consistent production quality. Order the M14 x 2 limit thread plug gauge via Metav Werkzeuge or consult the Metav team for application advice. Limit thread plug gauge M14 x 2 (ISO metric, right-hand) — Metav IndustryLine The Limit thread plug gauge M14 x 2 is a compact inspection tool for rapid verification of right‑hand ISO metric threads in production and quality control. Hardened gauge steel construction DIN 13, tolerance 6H compliance For M14 x 2 ISO metric right‑hand threads Reliable thread verification that protects production quality The M14 x 2 limit thread plug gauge provides a clear, objective assessment of thread conformity to the ISO metric profile defined in DIN 13. As a limit gauge, it is intended for quick pass/fail checks that confirm whether a manufactured internal or mating external thread meets the specified tolerance band (tolerance 6H). This simplifies decision‑making on the shop floor: only parts that engage with the gauge within the accepted limits proceed to the next production step, which reduces rework and rejects. The gauge’s role is measurement assurance rather than dimensional reporting; it verifies fit reliably and repeatedly. Hardened construction for long service life and minimal maintenance Manufactured from hardened gauge steel, the plug gauge is designed to withstand routine contact with mating threads and resist wear over repeated use. The material choice delivers stable form retention and reduces the frequency of replacement, which lowers total operating cost and downtime in inspection stations. Where process stability is critical, the robust construction ensures that the tool remains a dependable reference for many inspection cycles, supporting continuous production without frequent tool changes. Simple integration into inspection workflows and traceability The plug gauge is compact, easy to store and straightforward to use during batch checks or spot inspections. Its defined thread diameter and pitch characteristics (14 mm diameter, 2 mm pitch) make it directly applicable to ISO metric M14 x 2 components used across mechanical assemblies. The clear standard reference (DIN 13, 6H) eases documentation in quality records and audit trails. When paired with a structured inspection plan from Metav, the gauge supports consistent acceptance criteria and contributes to a traceable quality system. For procurement and tailored advice on implementing the M14 x 2 limit thread plug gauge within existing inspection routines, contact Metav Werkzeuge in Emmerich for reliable supply and expert guidance. Technical data SKU: M315.014 GTIN: 4054469122403 eClass: 21170235 Tariff number: 90173000 Facts Thread diameter: 14 mm Thread pitch: 2 mm Tolerance class: 6H Standard: DIN 13 Special features Right‑hand ISO metric thread Material: hardened gauge steel Category: Gauges, Thread gauges Intended use: Verification of ISO metric threads FAQ What thread standard does the gauge verify? The M14 x 2 limit thread plug gauge verifies ISO metric threads in accordance with DIN 13 and the 6H tolerance class, ensuring compatibility with standard metric fittings. Is the gauge suitable for routine workshop inspection? Yes, the plug gauge from Metav IndustryLine is made of hardened gauge steel and is designed for repeated use in production and inspection environments. Which part does the gauge check on assemblies? This limit thread plug gauge checks the internal acceptance condition for mating threads specified as M14 x 2; the tool confirms whether the mating external thread falls within acceptable form and pitch limits. How is the gauge identified for inventory and traceability? The tool is listed under SKU M315.014 and GTIN 4054469122403, which can be used for stock control and traceability in quality documentation. Can the gauge be used as a reference in inspection plans? Yes, the M14 x 2 plug gauge is suitable for inclusion in inspection plans where quick go/no‑go verification of ISO metric threads is required, supporting consistent acceptance criteria. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M15 x 1.5 Thread Go Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
The hardened construction, DIN 13 tolerance and precise M15 x 1.5 mm sizing deliver consistent pass/fail verification for metric ISO fine threads; this No‑Go ring gauge reduces rework and secures production quality. Order directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M15 x 1.5 mm (No‑Go) — hardened gauge steel, DIN 13 — Metav IndustryLine A Thread ring gauge M15 x 1.5 mm (No‑Go) for reliable pass/fail inspection of metric ISO fine threads in production and incoming inspection Hardened gauge steel construction DIN 13 tolerance class 6g Sized for M15 x 1.5 mm metric fine threads Right‑hand thread verification Fast, standards‑based pass/fail inspection for busy production The No‑Go thread ring gauge is designed for rapid go/no‑go checks on threaded components, delivering a clear accept/reject decision in a single handling step. Built to DIN 13 with tolerance class 6g, the gauge provides a measurable and repeatable reference that fits into shop‑floor quality routines and reduces subjective judgement. Using a dedicated No‑Go gauge for the M15 x 1.5 mm pitch means thread checks are completed faster than with measurement by micrometre or profile equipment, improving throughput without compromising conformity to established standards. Robust build for long service life and consistent results Manufactured from hardened gauge steel, the ring withstands repetitive use and resists wear that would otherwise alter the inspection margin. The material choice and heat treatment ensure dimensional stability and long term durability, so the reference limit remains trustworthy over many cycles. The compact, single‑feature design avoids adjustment errors and supports operators in maintaining consistent test force and orientation, which in turn reduces false rejects and process interruptions. Integrates cleanly into quality workflows and traceability systems As a purpose‑made thread gauge, this unit simplifies documentation of routine inspections: the measured characteristic (M15 x 1.5 mm, right‑hand thread, tolerance 6g) is explicit and aligns with inspection plans and control charts. For batch acceptance and audit trails, the compact nature of the gauge makes it easy to store alongside inspection records and sample parts; it can be used at receiving, in‑process checks, or final inspection. Where automatic traceability is required, the simple pass/fail result can be combined with existing workflow checklists to support continuous improvement efforts. Choose Metav IndustryLine gauges for dependable thread control — contact Metav Werkzeuge in Emmerich for procurement and application guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.215.6 GTIN: 4054469125817 Weight: 0.1 kg Thread size: M15 x 1.5 mm Facts Tolerance class: 6g Standard: DIN 13 Right‑hand thread Harmonised system: 90173000 Special features Material: hardened gauge steel Type: No‑Go thread ring gauge Category: Gauges / Thread gauges Manufacturer: Metav IndustryLine FAQ What is the purpose of this thread ring gauge? The thread ring gauge M15 x 1.5 mm (No‑Go) is intended for pass/fail verification of metric ISO fine threads; it confirms whether a threaded part exceeds the allowed tolerance. How does the No‑Go gauge indicate a reject? If the M15 x 1.5 mm No‑Go ring gauge enters the thread, the part does not meet the tolerance and is classified as reject; the gauge provides a binary, repeatable decision. Which standard does the gauge comply with? The gauge is manufactured to DIN 13 with a 6g tolerance class, matching common specifications for metric fine threads. Is the gauge suitable for right‑hand threads only? Yes, this Metav IndustryLine unit is produced specifically for right‑hand metric ISO fine threads of M15 x 1.5 mm. Can this gauge be used in production and incoming inspection? The gauge is suitable for both incoming inspection and in‑process checks; its hardened construction is optimised for frequent shop‑floor use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M15x0.75 Limit Thread Plug Gauge Right-Hand ISO Metric Thread DIN 13, 6H Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and strict conformity to DIN 13, tolerance 6H to ensure fast, reproducible thread acceptance decisions on the shop floor; purchase the limit gauge directly from Metav Werkzeuge or contact our consultants for assistance. Limit thread plug gauge M15 x 0.75 (right‑hand) — hardened gauge steel, DIN 13 (Metav IndustryLine) The Limit thread plug gauge M15 x 0.75 serves as a compact inspection gauge for verifying metric ISO fine threads in production and quality control, designed for right‑hand threads and routine shop use Hardened gauge steel construction Conforms to DIN 13, tolerance class 6H Metric M15 x 0.75 right‑hand thread Compact 0.12 kg for easy handling Fast pass/fail decisions that protect throughput A limit thread plug gauge delivers immediate, objective verification of threaded parts, avoiding time‑consuming measuring sequences. The combination of M15 x 0.75 nominal size and 6H tolerance class matches standard metric ISO fine‑thread specifications, so parts can be quickly accepted or rejected at the machine or inspection bench. Using a dedicated inspection plug reduces downstream rework and supports consistent process control, helping to keep production flow steady and measurable. Built for long service in everyday inspection The gauge is manufactured from hardened gauge steel, which resists wear and preserves critical thread profiles under repeated engagement. The compact mass of 0.12 kg makes the tool easy to handle during batch checks and minimizes operator fatigue during repetitive use. The robust construction and standardised geometry support repeatable results over many inspection cycles, so maintenance intervals are predictable and tool replacement is straightforward. Traceability and simple integration into inspection routines Each unit is supplied with a clear identifier to support traceability and stock control: SKU M315.015.3 and GTIN 4054469122465 are referenced for ordering and inventory. The gauge’s conformity to DIN 13 ensures compatibility with common thread specifications across suppliers, simplifying vendor checks and incoming inspection. Lightweight and compact, the plug gauge is suitable for workshop benches and portable inspection kits, making it easy to standardise acceptance criteria across multiple stations For reliable thread inspection with Metav IndustryLine quality, contact Metav Werkzeuge for local delivery and expert advice from Emmerich: info@metav-werkzeuge.com — Tel +49 2822 7131930 Technical Data Article number: M315.015.3 GTIN: 4054469122465 Weight: 0.12 kg Facts Thread nominal: M15 x 0.75 Tolerance class: 6H Tariff number: 90173000 Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Conforms to DIN 13 Category: Lehren / Messstifte Brand: Metav IndustryLine FAQ What size and pitch does this gauge verify? The gauge verifies metric ISO fine threads with the nominal size M15 x 0.75, suitable for right‑hand thread checks. Which tolerance class is covered by the gauge? The tool is manufactured to match tolerance class 6H in accordance with DIN 13, enabling standardised acceptance testing. Is the gauge suitable for frequent shop‑floor use? Yes, the hardened gauge steel construction and compact mass of 0.12 kg make the gauge durable and easy to handle for repeated inspections. How is the product identified for ordering and stock control? Use the SKU M315.015.3 or GTIN 4054469122465 for ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M15x0.75 Thread Ring Gauge Metric ISO Fine Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a compact inspection solution that combines metric ISO fine-thread checking, conformity to DIN 13 / 6g and a hardened gauge-steel construction for dependable in-process control; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M15 x 0.75 mm (DIN 13, 6g) – Metav IndustryLine Thread ring gauge M15 x 0.75 mm is a right-hand metric ISO fine-thread inspection tool designed for routine production checks and incoming goods control in precision engineering environments Metric ISO fine thread M15 x 0.75 Tolerance to DIN 13 / 6g Hardened gauge steel construction Suitable for right-hand thread checks Consistent verification for fine threads A compact inspection ring optimised for fine-pitch applications, the M15 x 0.75 mm ring provides a clear pass/fail criterion against the DIN 13 tolerance class 6g. Using a dedicated ring for this nominal and pitch ensures fast verification of external threads during serial production or quality control, reducing measurement ambiguity. The hardened construction maintains the thread form and minimises wear, which supports repeatable results and lowers the need for frequent replacement. Durable material and dimensional stability Manufactured from hardened gauge steel, the check ring resists deformation under normal handling and keeps the threaded profile intact over many engagements. The material choice and heat treatment help preserve the gauge geometry so that the tolerance class 6g remains meaningful throughout its service life. The light mass of approximately 0.1 kg makes the tool easy to handle on the inspection bench while retaining sufficient stiffness for reliable tactile checks. Integrating the gauge into quality workflows The ring is intended for direct use in production and inspection routines where metric ISO fine threads must be confirmed quickly and unambiguously. As a simple go/no-go control, the instrument streamlines decision-making and supports traceable processes when paired with documented inspection plans. Where traceability or higher-level reporting is required, the gauge complements measurement equipment and documented sampling procedures to maintain consistent part acceptance criteria. For precision thread inspection of fine metric threads, contact Metav Werkzeuge for tailored advice or to order the Metav IndustryLine thread ring gauge M15 x 0.75 mm (SKU M315.215.3) Technical data Article number: M315.215.3 GTIN: 4054469125794 Thread size: M15 Pitch: 0.75 mm Weight: 0.1 kg Standard: DIN 13 Tolerance class: 6g Facts Zolltarifnummer: 90173000 ECLASS: 21170214 Special features Material: hardened gauge steel Thread direction: right-hand Category: Gauges / Lehren Suitable for: metric ISO fine threads FAQ What is the intended use of this ring gauge? The thread ring gauge M15 x 0.75 mm by Metav IndustryLine is intended for rapid inspection of external metric ISO fine threads to DIN 13, tolerance class 6g, providing a clear pass/fail check in production and incoming inspection. Can this gauge be used for left-hand threads? No, this particular gauge is manufactured for right-hand threads; left-hand checks require the corresponding left-hand ring gauge. How does the material affect performance? Hardened gauge steel maintains the thread form and resists wear; this preserves the gauge geometry so that inspections against DIN 13 / 6g remain reliable over extended use. Is the gauge suitable for serial production checks? Yes, the compact construction and clear tolerance conformity make the ring suitable for routine serial inspections and quick acceptance decisions on the shop floor. What identification is associated with the product? The Metav IndustryLine ring gauge is supplied as SKU M315.215.3 and GTIN 4054469125794 for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M15x1 Limit Thread Plug Gauge, Right-Hand, DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Reliable verification of metric fine threads is achieved through a compact, hardened limit plug gauge that combines conformity to DIN 13 (6H) with robust gauge steel construction; ideal for inline checks and recurring inspections. Benefit from fast Go/No‑Go assessments, consistent wear resistance and straightforward handling — order the limit thread plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit thread plug gauge M15 x 1 — metric ISO fine thread, DIN 13 (6H) | Metav IndustryLine The Limit thread plug gauge M15 x 1 is a hardened male gauge for rapid verification of metric ISO fine threads in production and inspection environments. Limit plug gauge M15 x 1, metric fine thread Conforms to DIN 13 tolerance 6H Hardened gauge steel for wear resistance Compact weight 0.12 kg for easy handling Fast, standards‑based thread verification for production A compact plug gauge such as this enables immediate, binary acceptance checks on threaded components: the Go/No‑Go principle verifies functional conformity without elaborate measurement set‑ups. Conformance to DIN 13 with a 6H tolerance band ensures that threads are assessed against the recognised metric ISO fine‑thread standard, providing traceable criteria for quality control and batch release in machining and assembly operations. Durable build for repeatable inspection cycles Manufactured from hardened gauge steel, the gauge resists wear and preserves its inspection edge over extended use, which reduces the frequency of replacements and helps maintain process capability. The lightweight design (approx. 0.12 kg) supports quick transfer between bench and machine, while the robust material choice contributes to consistent repeatability and minimal dimensional drift during routine checks. Clear handling and workplace integration As a right‑hand limit plug gauge for M15 x 1 threads, the component is suited to inline checks, incoming inspection and final assembly controls. Its simple male profile requires no auxiliary fixturing for most tests, allowing technicians to perform rapid conformity checks at the point of work. Where documented evidence is required, the gauge provides an efficient first‑level control before committing parts to full metrological inspection. Request the Metav IndustryLine limit thread plug gauge M15 x 1 from Metav Werkzeuge or contact our specialists for tailored advice on integrating this gauge into existing inspection routines Technical data Article number: M315.015.4 GTIN: 4054469122472 Weight: 0.12 kg Material: Gauge steel, hardened Thread: M15 x 1 Tolerance/fit: 6H Hand: Right‑hand Standard: DIN 13 Core measurements Thread size: M15 x 1 Tolerance class: 6H Mass: 0.12 kg Special features Limit plug gauge for metric ISO fine threads Hardened gauge steel for wear resistance Right‑hand thread design Category: Limit gauge / plug gauge FAQ What is the purpose of this limit plug gauge? The limit thread plug gauge M15 x 1 (Metav IndustryLine, SKU M315.015.4) is used for quick Go/No‑Go checks to confirm whether a metric ISO fine thread meets the required tolerance. Which standard does the gauge comply with? This plug gauge complies with DIN 13 and is manufactured to the 6H tolerance class for metric fine threads. Can this gauge be used in production environments? Yes, the hardened construction and compact mass make the gauge suitable for shop‑floor use, inline checks and incoming inspection routines. What materials is the gauge made from? The gauge is made from hardened gauge steel to ensure wear resistance and long service life during repeated inspections. Is the gauge right‑hand or left‑hand? The tool is a right‑hand limit plug gauge designed for right‑hand threads with an M15 x 1 pitch. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M15x1 Thread Go Plug Gauge For Metric ISO Fine Thread Right-Handed Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of a compact, standards-compliant inspection tool that combines hardened gauge steel construction with precise conformity to DIN 13 (6g) for dependable go/no‑go assessment; order directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M15 x 1 mm (no‑go) — ring gauge, DIN 13, 6g (Metav IndustryLine) Thread ring gauge M15 x 1 mm (no‑go) is a hardened ring gauge intended for repeatable inspection of metric ISO fine external threads in production and quality control environments. Hardened gauge steel, precision ground For metric ISO fine thread M15 x 1 Conforms to DIN 13 tolerance 6g No‑go ring for right‑hand threads Built for reliable thread inspection The thread ring gauge is engineered to give rapid, objective decisions on external thread conformity. Machined from hardened gauge steel, the ring maintains its form under repeated use, reducing drift and rework. Conformity to DIN 13 and the 6g tolerance class means the gauge is matched to common engineering practice for metric ISO threads; this provides a measurable basis for quality control and helps to avoid ambiguous judgements on the shop floor. The no‑go function permits immediate rejection of out‑of‑tolerance parts, so inspection time is shortened and throughput is increased. Precision that reduces uncertainty in production Designed for metric ISO fine threads, the gauge size M15 x 1 and its no‑go characteristic enable clear pass/fail checks without intermediate interpretation. The ring’s tolerance relationship to parts ensures that rejected items are consistently identified, lowering the risk of assembly failures and costly recalls. Using a dedicated ring gauge in-process supports efficient statistical process control and improves first‑pass yield, delivering measurable time and cost benefits in series production environments that demand traceable inspection methods. Practical handling and workshop integration At roughly 0.1 kg, the ring is compact and simple to handle during rapid inspections or on a measuring bench. The right‑hand thread design suits standard threaded components and fixtures; its compact footprint helps integration into existing inspection routines without elaborate fixturing. The robust construction allows straightforward storage in tool cabinets and easy transport between workstations while maintaining its measuring function, promoting consistent results across shifts and operators. Confidence from a specialist supplier Sourcing from Metav IndustryLine provides the additional assurance of a European quality filter: consistent stock, clear product data and supply reliability from Emmerich. The ring gauge supports established inspection protocols and complements a broader metrology toolkit that Metav supplies to workshops and production facilities. Investing in a standards‑matched gauge ring fosters trustworthy quality routines and supports transparent documentation of inspection outcomes. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine ring gauge into production inspection and to confirm delivery options from Emmerich. Technical Data Article number: M315.215.4 GTIN: 4054469125800 Brand: Metav IndustryLine Material: Gauge steel, hardened Standard: DIN 13, 6g Facts Thread size: M15 x 1 mm Thread pitch: 1 mm Tolerance class: 6g Weight: 0.1 kg Tariff number: 90173000 Special features No‑go (reject) ring function Right‑hand thread Precision ground finish For metric ISO fine thread inspection FAQ What thread size and pitch does this gauge check? The thread ring gauge M15 x 1 mm (no‑go) checks external threads with size M15 and a 1 mm pitch in accordance with metric ISO specifications. Does the ring correspond to a specific tolerance class? Yes, the ring is manufactured to match the DIN 13 requirements for tolerance class 6g, providing a standardised reference for external thread acceptance. Is this a go or a no‑go instrument? The product is specified as a no‑go ring, designed to identify threads that exceed allowable limits for external threads and therefore should be rejected. What material is the gauge made from? The gauge is produced from hardened gauge steel, chosen for wear resistance and long‑term stability under repeated inspection cycles. Can this ring be used for left‑hand threads? This particular ring is specified for right‑hand threads; left‑hand applications require a correspondingly produced ring for correct engagement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M15x1 Thread Ring Gauge Metric ISO Fine Right-Hand DIN 13, Hardened Gauge Steel 6g - Metav IndustryLine
Robust hardened gauge steel, DIN 13 conformity and an exact M15 x 1 mm go tolerance ensure repeatable thread acceptance decisions on the shop floor; order the Go thread ring gauge M15 x 1 mm directly via Metav Werkzeuge or ask our consultants if needed Go thread ring gauge M15 x 1 mm — DIN 13 go ring gauge for metric ISO fine threads (right-hand) — Metav IndustryLine The Go thread ring gauge M15 x 1 mm is a hardened inspection ring for quick verification of metric ISO fine threads (right-hand), designed for use in production testing and quality control Hardened gauge steel construction DIN 13, tolerance class 6g For M15 x 1 mm metric fine threads Reliable conformity for pass/fail inspection The ring is manufactured to DIN 13 with tolerance class 6g, providing a clear, standards-based decision for threaded parts. As a designated go ring gauge, it confirms that external threads comply with the specified maximum material limits; an item that fully engages the ring is accepted, while failure to engage indicates a non-conforming thread. This approach simplifies inline sampling and reduces interpretation time during inspection, delivering a measurable improvement in throughput and fewer false rejections. Durable construction for long service life Made from hardened gauge steel, the gauge resists wear and maintains its profile through repetitive use. Heat-treated finishing ensures dimensional stability and low maintenance requirements in industrial environments. The material choice and hardening process reduce profile deformation under typical use, which translates into a longer calibration interval and predictable replacement cycles—factors that contribute to lower operating cost and fewer production interruptions. Practical use in production and incoming inspection Compact and unambiguous in function, the ring enables rapid go/no-go checks at assembly stations and inspection benches. The M15 x 1 mm sizing and right-hand thread orientation match many fine-thread applications in mechanical assemblies, fittings and precision components. Because the gauge offers an immediate binary result, measuring routines become faster and less dependent on skilled personnel, supporting consistent quality control across multiple shifts and operators. Traceability and workshop integration Marked identification and the supplied article data facilitate traceability in quality records and part master files. The modest mass and robust profile make the ring easy to store in inspection trays or mounting fixtures without risk of damage. Integration into existing inspection workflows is straightforward: keep the gauge clean, perform visual checks for wear, and record usage according to the facility’s sampling plan to maintain consistent acceptance criteria. How the gauge supports a dependable quality culture By standardising the acceptance criterion for a given thread form, the gauge helps align production, procurement and inspection teams around a single measurable benchmark. Utilised alongside procedural controls and supplier checks, the ring contributes to fewer assembly issues and improved first-pass yields, reinforcing confidence in delivered components while supporting traceable quality processes. For application advice or to request delivery details for the Metav IndustryLine M15 go ring gauge, contact Metav Werkzeuge for tailored support and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.115.4 GTIN: 4054469124148 Weight: 0.16 kg Manufacturer: Metav IndustryLine Facts Thread size: M15 x 1 mm Tolerance class: 6g Standard: DIN 13 Thread direction: Right-handed Special features Material: Hardened gauge steel Type: Go ring gauge for metric ISO fine threads Application: Inspection / production control FAQ What does the go ring verify? The Go ring verifies that an external thread meets the maximum material limit for the specified M15 x 1 mm metric ISO fine thread; engagement indicates conformity. Is this gauge suitable for production checks? Yes, the Metav IndustryLine Go thread ring gauge M15 x 1 mm is designed for rapid production and incoming inspection use, offering a clear go/no-go decision. What standard does the gauge conform to? The gauge is manufactured to DIN 13 with a tolerance class of 6g, ensuring standardised acceptance criteria. How is the gauge marked for traceability? The ring carries the article identification and can be recorded against inspection lot numbers to maintain traceability in quality documentation. Can the gauge be used for left-hand threads? This particular ring is made for right-hand metric ISO fine threads; left-hand versions must be ordered separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M15x1.5 Thread Limit Plug Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H Hardened Gauge Steel - Metav IndustryLine
Conflicting product data detected: the fields "ausschuss" and "gut" are both set, which is contradictory. This inconsistency in the source data creates a situation where a reliable product description cannot be generated. Accurate and consistent data is essential for ensuring the integrity of the product information and avoiding errors in processing. To proceed, it is necessary to resolve this conflict by correcting the product information. Once the data has been updated to eliminate the contradiction, the product description can be generated successfully. Please review the source data carefully, make the required adjustments, and resubmit for processing.
M15x1.5 Thread Ring Gauge Good 6g Metric ISO Fine Right-Hand, Hardened Gauge Steel DIN 13 - Metav IndustryLine
Combine fast go/no-go verification with hardened construction and DIN‑specified tolerances for reliable thread control in production. Benefit from consistent pass/fail checks and robust handling; order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M15 x 1.5 (go) — DIN 13, 6g — Metav IndustryLine A thread ring gauge M15 x 1.5 (go) for quick verification of metric ISO fine threads in production and quality assurance. DIN 13 standard, 6g tolerance Hardened gauge steel construction Go gauge for M15 x 1.5 metric fine thread Right-hand thread, ready for inspection Faster go/no‑go checks for consistent production quality The primary advantage of this gauge is clear: rapid acceptance testing reduces inspection time and limits production interruptions. As a go gauge manufactured to DIN 13 with a 6g tolerance, it provides an unambiguous pass result for M15 x 1.5 threads, enabling quick decisions at the assembly line. The simple go/no‑go principle removes ambiguity from manual gauging and supports higher throughput without sacrificing measurement certainty. This direct approach to verification helps maintain process reliability and lowers the risk of rejected assemblies. Durable construction that maintains accuracy over time Made from hardened gauge steel, the ring resists wear and preserves dimensional stability under routine use. The robust material choice and precise manufacturing ensure high repeatability, so acceptance limits remain trustworthy even after many cycles. With a compact mass of 0.16 kg and a solid geometry intended for production environments, the gauge withstands handling in workshop and shop‑floor contexts while keeping measurement uncertainty low. This durability translates into fewer replacements and reduced downtime for calibration or tool change. Simple integration into quality workflows and traceability The ring is designed for straightforward inclusion in inspection benches, fixture checks and incoming goods control, supporting lean quality procedures and clear documentation. Marking and traceable identification allow registration in inspection plans and traceability systems, aiding conformity audits and batch records. For operations requiring routine, unequivocal thread checks on metric ISO fine threads, the combination of standard compliance, hardened material and clear go/no‑go feedback simplifies training and reduces operator variability while supporting consistent end‑product quality. Contact Metav Werkzeuge today for application advice or to secure the Metav IndustryLine thread ring gauge M15 x 1.5 (go) for immediate dispatch — phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M315.115.6 GTIN: 4054469124155 Manufacturer: Metav IndustryLine Net weight: 0.16 kg Facts Nominal thread: M15 x 1.5 Tolerance: 6g Standard: DIN 13 Tariff number: 90173000 Special features Go gauge (acceptance ring) Right‑hand metric fine thread Hardened gauge steel For production inspection and quality control FAQ What is the primary use of this ring gauge? The thread ring gauge M15 x 1.5 (go) by Metav IndustryLine is used for go/no‑go verification of metric ISO fine threads to confirm that threads meet the DIN 13 6g acceptance criteria. Which thread specification does the gauge check? This gauge checks M15 x 1.5 nominal threads with tolerance class 6g, suitable for standard metric ISO fine‑thread controls. Is the gauge suitable for left‑hand threads? No. The ring is manufactured for right‑hand metric threads and must not be used for left‑hand thread inspection. What material is the gauge made from and why does it matter? Constructed from hardened gauge steel, the material ensures wear resistance and dimensional stability, which preserves the acceptance limits over repeated inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M15×0.75 Thread Go Ring Gauge Metric ISO Fine Right-Hand DIN 13 6g Hardened Gage Steel - Metav IndustryLine
The high-precision M15 x 0.75 Go ring gauge combines conformity to DIN 13 (6g) with a hardened gauge-steel body to ensure reproducible thread acceptance criteria and long service life; order directly via Metav Werkzeuge or consult our specialists for application guidance. Thread ring gauge M15 x 0.75 (Go) — right-hand » Metav IndustryLine The Thread ring gauge M15 x 0.75 (Go) is a compact inspection ring designed for rapid verification of metric ISO fine external threads in production and incoming inspection. Go ring gauge for M15 x 0.75 Hardened gauge steel construction DIN 13 tolerance class 6g Precision that keeps inspection reliable and fast A dedicated Go ring gauge for the metric fine thread M15 x 0.75 delivers an immediate pass criterion for external threads, simplifying acceptance decisions at the production line. Conformance with DIN 13 and tolerance class 6g provides a clear, industry‑recognised tolerance band, which reduces subjective interpretation during checks. The gauge functions as a deterministic control: a correct fit indicates the thread meets the specified limits, enabling faster throughput and fewer hold‑ups in assembly and quality control. Robust construction for repetitive use and traceability Manufactured from hardened gauge steel, the inspection ring resists wear under frequent use and retains its measuring edges for extended periods, lowering total lifecycle costs. The compact mass of the ring makes handling straightforward while maintaining stability during tactile checks; the solid construction supports repeatable outcomes across many cycles. Supplied as a single Go ring for right‑hand threads, the instrument complements existing inspection fixtures and supports traceability through SKU and GTIN labelling. Integrating the gauge into standard quality workflows The ring is intended for verification of metric ISO fine threads in production, incoming goods and final inspection processes. Its straightforward application—fit the ring onto the external thread and assess the pass condition—supports rapid inline checks without complex fixturing. Identification via SKU M315.115.3 and GTIN 4054469124131 allows straightforward inventory and traceability within digital quality systems, while the durable material and standard conformity facilitate harmonised sampling plans and acceptance routines. Contact Metav Werkzeuge today to discuss the Metav IndustryLine M15 Go ring gauge and ensure the right inspection strategy for fine metric threads; experts are available by phone or e‑mail from Emmerich. Technical data Article number: M315.115.3 GTIN: 4054469124131 Weight: 0.16 kg Brand: Metav IndustryLine Facts Thread size: M15 x 0.75 Tolerance/class: DIN 13, 6g Thread direction: Right‑hand Tariff code: 90173000 Special features Material: hardened gauge steel Type: Go ring gauge Application: Metric ISO fine external threads Categories: Gauging pins; Gauges FAQ What is the primary use of this ring gauge? The ring gauge is used to check external metric ISO fine threads — the Thread ring gauge M15 x 0.75 (Go) by Metav IndustryLine confirms whether a thread meets the pass criteria defined by DIN 13, 6g. Does this gauge check left‑hand threads? No, this specific ring is manufactured for right‑hand threads only; left‑hand threads require the corresponding left‑hand gauge. How is conformity ensured when using the gauge? Conformity is ensured by the ring’s match to DIN 13 specifications and its hardened construction, which maintains the acceptance contour over repeated inspections; identification via SKU M315.115.3 aids process traceability. Can this gauge be used in production sampling plans? Yes, the compact Go ring gauge is suitable for inline and incoming inspections and can be incorporated into sampling plans for quick accept/reject decisions. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16 x 0.75 Thread Gauge Ring Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of DIN 13 compliance, hardened gauge steel and a compact, lightweight design to ensure fast and repeatable thread inspection. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for integration into existing inspection routines. Thread ring gauge M16 x 0.75 mm — hardened gauge steel, DIN 13 6g (right-hand) A Thread ring gauge M16 x 0.75 mm designed for quick verification of metric ISO fine threads in production and laboratory inspection, suitable for routine go/no-go checks on right-hand threads Thread size M16 x 0.75 mm, DIN 13 6g Hardened gauge steel for long life Right-hand metric ISO fine thread Lightweight: 0.13 kg for easy handling Reliable verification that speeds up inspection The ring gauge is engineered for efficient thread verification and process control. Compliant with DIN 13 and manufactured to the 6g tolerance class, it provides a clear acceptance criterion for metric fine threads, specifically M16 x 0.75. Using a dedicated ring gauge in the inspection loop minimises subjective assessment and reduces measurement time compared with variable measuring methods. The result is a measurable improvement in throughput and fewer ambiguous rejects during quality checks. Durability and stable form for sustained accuracy Constructed from hardened gauge steel, the tool resists wear and preserves its profile under repeated engagement, which keeps measurement uncertainty low over time. The compact mass of 0.13 kg makes handling straightforward on the shop floor, while the robust material and heat treatment maintain the thread form even under frequent use. For production environments where repeatability matters, this stability translates into lower rework rates and predictable maintenance intervals. Fits seamlessly into modern inspection workflows Integration is straightforward: the gauge serves as an immediate go/no-go reference on workbenches and in inspection fixtures, supporting sectioning of parts by conformity without complex measurement setups. Traceable identifiers such as the SKU and GTIN allow easy documentation and part tracking in quality records, helping to close audit trails and streamline ISO-aligned processes. The compact form factor and adherence to established standards ensure compatibility with existing quality-control procedures and fixture layouts. Contact Metav Werkzeuge for precise specification sheets and to discuss how this Metav IndustryLine thread ring gauge can be aligned with current inspection plans Technical Data Article number: M315.216.3 GTIN: 4054469125831 Material: hardened gauge steel Standard: DIN 13, 6g Thread: M16 x 0.75 Direction: right-hand Weight: 0.13 kg Tariff number: 90173000 Core dimensions / Numbers Nominal diameter: M16 Pitch: 0.75 mm Tolerance class: 6g Mass: 0.13 kg Features / Applications For metric ISO fine threads Right-hand thread verification Hardened for wear resistance Category: thread gauges / lehr rings Intended use: production and inspection FAQ What is this gauge used for? This ring gauge is used to verify metric ISO fine threads — specifically M16 x 0.75 — as a quick go/no-go reference during production inspection. Which tolerance and standard does it follow? The gauge is manufactured to DIN 13 and the 6g tolerance class, providing a standardised acceptance criterion for fine metric threads. What material is the gauge made from and how durable is it? Made from hardened gauge steel, the ring gauge is wear-resistant and maintains its thread form under repeated use, ensuring sustained accuracy. Is the thread gauge right- or left-hand? This item is a right-hand thread ring gauge suitable for standard metric ISO fine thread checks. How is this gauge recorded for traceability? The product is listed with SKU M315.216.3 and GTIN 4054469125831 to support traceable documentation in quality systems Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16x0.75 Limit Thread Plug Gauge Right-Hand Metric ISO Fine Pitch, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The combination of a DIN 13 tolerance class and hardened gauge steel ensures consistent go/no-go results for fine-pitch threads; rapid pass/fail checks support efficient production control. Order the limit thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug gauge M16 x 0.75 (ISO fine thread, DIN 13 6H) — Metav IndustryLine The Limit thread plug gauge M16 x 0.75 provides fast go/no-go verification for right‑hand ISO fine threads in component inspection and production control. Hardened gauge steel for long-term stability Conforms to DIN 13 tolerance class 6H Right-hand M16 x 0.75 fine-thread inspection Fast, standards-based verification for fine threads A limit thread plug gauge delivers an immediate binary result: accept or reject. By matching the DIN 13 specification and the 6H tolerance class, this device removes ambiguity from routine checks and accelerates throughput in machining and assembly areas. The gauge acts as a simple functional test that replaces time-consuming measurement cycles where only conformity to thread limits is required. For workstations handling series production of fasteners, housings or precision fittings, this method reduces inspection time while maintaining traceable conformity to recognised standards. Durable construction for repeatable usage Manufactured from hardened gauge steel, the gauge is built to resist wear from continual engagement with mating threads, preserving the defined limits over a long service life. The compact form factor and right‑hand thread geometry make it straightforward to handle on the shop floor; the tool provides reliable tactile feedback when a thread meets the limit condition. Robust material selection and controlled hardening ensure that periodic replacement intervals are minimised, lowering total cost of ownership and keeping shop‑floor downtime to a minimum. Integrates into production and quality routines The limit plug is ideal for inline quality stations, assembly checks and first-off inspections where quick, repeatable decisions are required. Its use supports a rational inspection strategy: critical dimensions are verified immediately rather than deferred to laboratory measurement, which helps prevent batch rework and reduces scrap. As part of an organised inspection routine, the gauge contributes to consistent product quality, supports supplier acceptance tests and complements dimensional measurement systems without duplicating effort. Contact Metav Werkzeuge for availability and technical advice on Metav IndustryLine thread gauges in Emmerich; our consultants provide practical guidance for workshop integration. Technical data SKU: M315.016.3 GTIN: 4054469122502 ECLASS: 21170235 Customs tariff number: 90173000 Facts Thread size: M16 x 0.75 Tolerance class: DIN 13, 6H Weight: 0.14 kg Special features Material: gauge steel, hardened Type: limit (go/no-go) plug gauge Thread direction: right-hand Application: ISO fine-thread inspection Category: Gauges / Plug gauges FAQ What does a limit thread plug gauge check? A limit thread plug gauge performs a go/no‑go check of internal threads to confirm whether they meet the designed limits; the Limit thread plug gauge M16 x 0.75 verifies conformity to M16×0.75 ISO fine-thread criteria. Which tolerance standard applies to this gauge? The gauge is produced to DIN 13 with a 6H tolerance class, ensuring compatibility with common ISO metric fine-thread specifications. Is this gauge suitable for production use? Yes, the hardened construction and limit design make it suitable for frequent shop‑floor checks and inline inspections where rapid pass/fail decisions are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16x0.75 Thread Ring Gauge, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Combining hardened gauge steel, compliance with DIN 13 (6g) and a compact 0.19 kg mass, this Go ring gauge gives reliable, repeatable thread verification for fine‑pitch metric work and helps to reduce rejects and rework. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M16 x 0.75 — Go ring for metric ISO fine threads, hardened gauge steel (Metav IndustryLine) The Thread ring gauge M16 x 0.75 is a Go (acceptance) ring intended for quick verification of right‑hand metric ISO fine threads; it fulfils DIN 13 with a 6g tolerance and is designed for workshop and production use Go ring gauge for M16 x 0.75 metric ISO Manufactured from hardened gauge steel Tolerance to DIN 13, 6g specification Compact weight 0.19 kg for bench use Dependable conformity that keeps production flowing A Go ring offers a fast, unambiguous pass/fail check: if the threaded part enters the gauge, it meets the specified acceptance limit. Manufactured from hardened gauge steel, this ring provides a stable measuring surface that resists wear and preserves the reference dimension over many cycles, supporting consistent quality control. Conformity to DIN 13 (6g) ensures compatibility with standardised tolerances for metric ISO fine threads, enabling straightforward integration into existing inspection routines and reducing the need for subjective judgement during go/no‑go checks. Robust design for everyday workshop handling The compact construction and a mass of 0.19 kg make the gauge simple to handle at the bench without compromising stiffness; the hardened steel body keeps the gauge dimensionally stable under normal workshop use. This robustness translates into fewer replacement intervals and lower lifetime cost for the inspection setup. The ring is intended for metric ISO fine thread verification on right‑hand threads, offering a pragmatic balance between longevity and ease of use for maintenance teams and production inspectors. Quick integration into quality processes and traceability As a standardised gauge, the ring fits directly into established quality workflows: it is suitable for inline checks, final inspection stations and sampling plans that rely on simple, repeatable acceptance tests. The clear specification — M16 x 0.75, 6g, DIN 13 — simplifies documentation and reduces ambiguity in inspection protocols. For buyers seeking dependable supply, Metav’s logistics and specialist advice help to ensure the gauge arrives ready for immediate use and is recorded correctly in quality documentation. Contact Metav Werkzeuge for availability and expert guidance on selecting the right M16 ring gauge for production or inspection tasks Technical data Article number: M315.116.3 GTIN: 4054469124179 Weight: 0.19 kg Material: hardened gauge steel Thread size: M16 x 0.75 Norm: DIN 13, 6g Commodity code: 90173000 Key measurements Thread designation: M16 x 0.75 Tolerance class: 6g Function: Go (acceptance) ring Special features Go ring for metric ISO fine threads Right‑hand thread orientation Durable, wear‑resistant construction Designed for workshop and production inspection FAQ What does the Go ring check for? The Go ring verifies that a threaded part does not exceed the maximum material limit; the thread will pass when it fully enters the Go ring, as specified for the M16 x 0.75 gauge. Is the ring compatible with standard ISO metric threads? Yes, the gauge is produced to DIN 13 for metric ISO fine threads and is specified as 6g for compatibility with common production tolerances. What material is used for the gauge? The ring is made from hardened gauge steel, chosen for dimensional stability and resistance to wear in routine inspection tasks. Can this gauge be used for left‑hand threads? This particular item is intended for right‑hand threads; left‑hand versions must be specified separately. How should the gauge be stored to maintain accuracy? Store the ring in a clean, dry place and avoid impacts; routine visual checks for wear are recommended and replacement should follow the inspection plan if wear is detected. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16x1 Limit Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Combining DIN 13 conformity, a 6H tolerance class and hardened gauge steel delivers dependable thread verification and fewer production stoppages. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge M16 x 1 mm — metric ISO fine thread, right-hand (Metav IndustryLine) The Limit plug gauge M16 x 1 mm is a compact go/no-go inspection gauge for rapid verification of metric ISO fine threads in production and quality control. Metric ISO fine thread M16 x 1 mm DIN 13 conformity, tolerance class 6H Hardened gauge steel for long service Right-hand go/no-go design for quick checks Ensure conformity and reduce rework with precise thread control The limit plug gauge is designed to provide fast, objective decisions on threaded parts: either the go side enters within tolerance or the no-go side prevents acceptance. Built to DIN 13 with tolerance class 6H, this gauge supports reproducible inspections that reduce scrap and rework while speeding throughput on the shop floor. The gauge’s metric designation M16 x 1 and right-hand thread match common fine-thread specifications, making it a practical choice for repetitive quality checks where traceable, standard-compliant results are required. Robust construction for consistent performance and low maintenance Manufactured from hardened gauge steel, the tool resists wear and maintains dimensional stability over many inspection cycles, which lowers lifecycle cost and reduces the need for frequent replacement. The compact geometry and modest weight allow straightforward handling during batch control or final inspection operations. The go/no-go format eliminates subjective judgement: accept/reject is immediate, aiding efficient process control and minimising downtime in both manual and semi-automated inspection routines. Fast integration into production and quality workflows As a limit gauge it is directly applicable at incoming inspection, in-process control and final acceptance tests. The simple pass/fail principle makes it suitable for operators with minimal training while supporting documented quality procedures. The gauge is especially useful where a verified thread form is critical for assembly integrity and sealing performance. For procurement or when specifying inspection equipment for a production line, the Limit plug gauge M16 x 1 mm from Metav IndustryLine offers a compact, standards-based instrument that supports consistent manufacturing outcomes. Contact Metav Werkzeuge for availability and technical consultation regarding the Metav IndustryLine limit plug gauge M16 x 1 mm Technical data Article number: M315.016.4 GTIN: 4054469122519 Manufacturer: Metav IndustryLine Weight: 0.14 kg Material: gauge steel, hardened Standard: DIN 13, 6H Thread: M16 x 1 Direction: right-hand Facts Nominal diameter: 16 mm Pitch: 1 mm Tolerance class: 6H Weight: 0.14 kg Tariff number: 90173000 Special features Hardened gauge steel Metric ISO fine thread Right-hand go/no-go design Category: thread gauges / limit gauges Intended for production and inspection use FAQ What standard does this gauge comply with? The gauge is manufactured to DIN 13 and specified for tolerance class 6H, ensuring compatibility with standard metric ISO fine-thread requirements. How is the gauge used in inspection? The limit plug gauge operates as a go/no-go tool: the go side must assemble into the thread, while the no-go side must not, providing an immediate accept/reject decision for threaded parts. What material is the gauge made from and why does it matter? Made from hardened gauge steel, the gauge offers enhanced wear resistance and dimensional stability for repeated use in production environments. Can this gauge be used for left-hand threads? This particular item is produced with a right-hand thread. For left-hand thread requirements, a corresponding left-hand gauge would be required. What are the SKU and GTIN for ordering? SKU: M315.016.4 GTIN: 4054469122519 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16x1 Thread Ring Gauge Go DIN 13 6g, Hardened Gauge Steel, Right-Hand - Metav IndustryLine
Take advantage of a precision-checked Go ring for M16 x 1 mm metric fine threads, manufactured in hardened gauge steel to DIN 13 with tolerance class 6g, for consistent thread verification in production and inspection. Order the gauge directly via Metav Werkzeuge or consult the technical advisors if additional specifications are required. Thread gauge ring M16 x 1 mm (Go) – Metric ISO fine thread, DIN 13 The Thread gauge ring M16 x 1 mm (Go) is a hardened inspection ring for right‑hand metric ISO fine threads, designed to verify thread conformity quickly and reliably in workshop and production environments Go ring for M16 x 1 mm metric fine thread Hardened gauge steel construction Manufactured to DIN 13, tolerance class 6g Compact weight 0.09 kg for easy handling Accurate thread checks for reliable production The M16 x 1 mm go ring delivers a straightforward, tactile verification method that eliminates guesswork at the control station. Designed as a dedicated Go ring, the instrument confirms that internal threads meet the lower limit of the allowed tolerance band so assemblies can be accepted without time‑consuming measuring routines. Using a gauge built to DIN 13 (6g) ensures compatibility with common engineering specifications and facilitates consistent acceptance criteria across suppliers and production lines. Robust construction that reduces rework Made from hardened gauge steel, the ring resists wear during repeated use and preserves its reference profile over time, which reduces the frequency of replacements and the risk of false rejects. The compact mass of 0.09 kg makes handling straightforward on the shop floor while the right‑hand configuration matches standard thread directions. The mechanical simplicity of a go ring minimises user training and speeds up operator throughput compared with more complex measuring devices. Standards and traceability for quality systems Compliance with DIN 13 and the stated tolerance class 6g simplifies documentation for quality audits and incoming inspection. The ring’s clear specification supports traceable acceptance procedures and helps maintain reproducible production runs. For organisations that integrate gauges into certified processes, the unambiguous profile of this inspection ring assists in maintaining sampling plans and maintaining supplier quality agreements. Practical integration into workshop routines The ring is suitable for quick checks at machining centres, assembly benches and incoming goods inspections where thread conformity must be verified rapidly. Its compact footprint and robust material mean it fits into standard tool sets or inspection kits without adding complexity. The instrument is an effective complement to measuring equipment where dimensional reports are required, enabling a rapid go/no‑go decision that keeps lines moving and reduces throughput delays. For guaranteed thread control, trust the Metav IndustryLine Go ring for M16 x 1 mm — order via Metav Werkzeuge for swift delivery and contact the Metav technical team at info@metav-werkzeuge.com or +49 2822 7131930 for application guidance Technical data Article number: M315.116.4 GTIN: 4054469124186 Weight: 0.09 kg Thread size: M16 x 1 mm Facts Standard: DIN 13, 6g Direction: right‑hand Category: Gauges / Thread inspection ring Tariff number: 90173000 Special features Material: hardened gauge steel Type: Go ring (acceptance gauge) Brand: Metav IndustryLine FAQ What does the Go ring check on an internal thread? The Go ring verifies that an internal thread is within the allowable lower limits for an M16 x 1 mm metric ISO fine thread; the ring should engage smoothly if the thread is acceptable. Is this gauge suitable for right‑hand threads only? Yes, the inspection ring is supplied for right‑hand metric ISO fine threads and is intended for use with M16 x 1 mm internal threads. Which standard does the ring comply with? The ring is manufactured to DIN 13 with tolerance class 6g, matching common engineering specifications for metric ISO threads. How does the material affect service life? Constructed from hardened gauge steel, the ring resists wear under repeated checks, preserving the reference profile and reducing the need for frequent replacement. Can the ring be used in production sampling? The compact Go ring is designed for rapid acceptance checks and is suitable for production sampling and incoming inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16x1.5 Thread Limit Go Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Data inconsistency detected: the product record is flagged both as rejected and as acceptable, which is contradictory. This issue prevents the generation of a clear and accurate description for the product. To resolve this, it is essential to review the source data thoroughly and identify the cause of the conflicting statuses. Once identified, please correct the source data to ensure that the product status is consistent and accurately reflects its intended classification. Providing a clear and unambiguous status will enable the generation of a complete and reliable product description, avoiding further complications or delays in processing.
M16x1.5 Thread Plain Gauge For Metric ISO Fine Thread Right Hand, DIN 13 6g - Metav IndustryLine
The combination of a DIN 13 tolerance class 6g and hardened gauge steel delivers dependable Go/No‑Go verification for metric fine threads; rapid acceptance checks reduce rework and keep production moving. Order the gauge directly via Metav Werkzeuge or consult our advisers for application guidance. Thread Ring Gauge M16 x 1.5 — DIN 13, 6g, Hardened Gauge Steel (Right-hand) The Thread Ring Gauge M16 x 1.5 is a precision Go/No‑Go ring designed for fast verification of metric ISO fine threads in production and inspection environments. DIN 13 tolerance class 6g Hardened gauge steel construction For M16 × 1.5 metric fine threads Go/No‑Go acceptance gauge Fast, reproducible thread acceptance that saves production time A Go/No‑Go ring offers immediate, binary results that remove ambiguity from thread inspection. By using a dedicated acceptance gauge the inspection process becomes vastly quicker than dimensional measurement methods, enabling quality checks at the machine or assembly station without specialist equipment. The M16 × 1.5 size covers common fine-thread applications and the DIN 13 tolerance designation ensures compatibility with established engineering standards, so component interchangeability and batch conformity are preserved while throughput is increased. Durable construction for long service life and low maintenance Constructed from hardened gauge steel, this ring gauge resists wear under frequent use and maintains its mating geometry longer than untreated alternatives. The heat-treated surface reduces the risk of profile degradation and preserves the precise limit planes required for reliable Go/No‑Go control. The robust material choice translates directly into fewer replacements and lower lifetime costs, while the compact mass supports easy handling and rapid utilisation on the shop floor. Clear specification for metric ISO fine threads and right‑hand use The thread designation indicates the nominal diameter and pitch: M16 x 1.5 describes a 16 mm major diameter with a 1.5 mm pitch, the common metric fine thread. The ring is manufactured for right-hand threads and conforms to DIN 13 with a 6g tolerance class, making it suitable for standard engineering and assembly tasks where fine-thread fittings are specified. For mixed-thread environments, matching gauges for left-hand or alternate pitches should be selected to avoid mischecks. Easy integration into quality routines and traceable identification This ring gauge is compact and straightforward to deploy at point-of-use, from in-process checks to final inspection benches. Markings and the SKU allow clear identification and inventory control, easing traceability in documented quality systems. Use the ring as a quick acceptance control to reduce reliance on time-consuming gaging equipment while still meeting inspection criteria; the clear Go/No‑Go outcome supports consistent decisions across operators and shifts. Choose the Metav IndustryLine thread ring gauge for dependable, fast thread control — contact Metav Werkzeuge in Emmerich for technical advice and prompt supply of SKU M315.216.6 Technical data SKU: M315.216.6 GTIN: 4054469125855 Weight: 0.13 kg Manufacturer: Metav IndustryLine Facts Thread size: M16 × 1.5 Tolerance class: 6g Standard: DIN 13 Customs tariff number: 90173000 Special features Material: gauge steel, hardened Right‑hand thread Go/No‑Go ring gauge Category: Gauges / Ring gauge FAQ What tolerance class does this ring gauge check? The ring checks threads to DIN 13 with a 6g tolerance class; the Thread Ring Gauge M16 x 1.5 is produced to these limits for consistent interchangeability. Is this gauge suitable for heavy‑duty workshop use? Yes — the hardened gauge steel construction provides abrasion resistance suitable for regular shop‑floor checks and repetitive Go/No‑Go acceptance. Can this ring gauge be used for left‑hand threads? No — this particular ring is manufactured for right‑hand threads; left‑hand versions must be ordered separately. How is the gauge identified in stock and documentation? Identification is by SKU M315.216.6 and GTIN 4054469125855, which should be recorded in inventory and quality documentation for traceability. Does the ring confirm pitch as well as diameter? The Go/No‑Go geometry verifies the mating profile and thread pitch/fit as defined by M16 × 1.5 and DIN 13, providing a practical acceptance check without detailed dimensional measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16x2 Limit Thread Go/No-Go Pin Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of DIN 13, 6H compliance, hardened gauge steel construction and compact handling for dependable thread inspection; order directly via Metav Werkzeuge or consult the Metav team for application advice. Go/No-Go Thread Plug Gauge M16 x 2 mm (metric ISO), right-hand — Metav IndustryLine Go/No-Go Thread Plug Gauge M16 x 2 mm (metric ISO), right-hand for rapid acceptance testing of production threads and incoming parts, designed to check conformity with DIN 13 tolerance 6H. Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6H Suitable for M16 x 2 metric ISO threads Compact, lightweight 0.14 kg design Ensure conformity with a single, reliable check The Go/No-Go thread plug gauge offers a straightforward, error‑resistant method for validating threaded parts by providing immediate go/no-go feedback at the point of inspection. Constructed from hardened gauge steel, the gauge resists wear and keeps thread profiles within tolerance over repeated use, reducing the need for frequent replacement. Compliance with DIN 13, 6H means the instrument verifies both pitch and form against the commonly applied metric ISO standard, making it suitable for general production control and incoming‑goods inspection in mechanical workshops and assembly lines. Faster inspection, fewer stoppages on the shop floor A compact, lightweight tool simplifies handling during repetitive checks: the gauge’s 0.14 kg mass and concise form factor enable quick engagement with threaded components and minimal operator fatigue. Using a dedicated plug gauge eliminates measuring ambiguity—tests are binary and immediate—so process throughput improves and non‑conforming parts are identified without complex measurement steps. The robust construction supports a consistent tactile feel, which aids operatives in rapid decisions and contributes to measurable gains in inspection efficiency. Traceability and workshop integration for quality systems This limit gauge carries a clear article identity and can be integrated into standard inspection routines, supporting traceable quality documentation. The plug gauge’s specification (thread M16 x 2, right‑hand) and adherence to DIN 13, 6H align with typical acceptance criteria used in machine building and component supply chains. The product entry includes SKU and GTIN identifiers for inventory control and ordering; if additional certification or specific traceability is required, Metav Werkzeuge can advise on calibration or documentary options to match internal quality management needs. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine Go/No-Go plug gauge M16 x 2 mm can be integrated into existing inspection routines or to request procurement advice tailored to production requirements Technical Data Article number: M315.016 GTIN: 4054469122496 Mass: M16 x 2 mm Material: gauge steel, hardened Weight: 0.14 kg Facts Thread: M16 x 2 mm Standard: DIN 13, 6H Tariff number: 90173000 eClass: 21170235 Special features Right-hand metric ISO standard thread Category: Gauges / Measuring pins Compact, shop-floor friendly form factor Durable hardened construction for extended service life FAQ What thread standard does this gauge check to? The Go/No-Go thread plug gauge checks threads to DIN 13, 6H standard and is specified for metric ISO threads M16 x 2. Is the gauge suitable for left-hand threads? This item is a right‑hand thread plug gauge; left‑hand variants are not covered by this SKU (M315.016). What material is the gauge made from and how durable is it? The gauge is manufactured from hardened gauge steel, providing wear resistance and a long service life under normal inspection use. Does the product include a calibration certificate? No calibration certificate is specified in the product data for this gauge; further calibration or certification options can be discussed with Metav Werkzeuge if required. How is the gauge typically used in production inspection? The plug gauge is used as a go/no‑go acceptance tool: the 'go' end verifies that thread size and form meet the minimum limits, while the 'no‑go' end confirms the upper limit is not exceeded, enabling immediate pass/fail decisions on threaded parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16x2 Thread Ring Gauge Go Right-Handed DIN 13, 6g, Hardened Gauge Steel - Metav IndustryLine
Compact right‑hand Go thread ring gauge for M16×2 with hardened gauge steel and DIN 13 (6g) tolerance, offering rapid pass/fail inspection and consistent reproducibility on the shop floor. Ideal for inline checks and final acceptance testing; order directly via Metav Werkzeuge or consult their specialists for integration advice. Thread ring gauge M16 × 2 mm (Go) — DIN 13 6g, hardened gauge steel (Metav IndustryLine) The Thread ring gauge M16 × 2 mm (Go) is a right‑hand metric ISO check ring designed for fast pass/fail inspection of M16×2 threads in production and workshop quality control. Hardened gauge steel construction DIN 13 tolerance 6g for ISO metric threads Right‑hand M16×2 Go gauge for quick checks Compact 0.19 kg weight for easy handling Repeatable compliance for production inspection A precision go gauge like this ensures a deterministic, repeatable decision during incoming inspection or in‑process checks. Built to DIN 13 with a 6g tolerance class, the gauge provides an objective check: a part that passes the ring meets the nominal ISO metric form and pitch requirements. Using a dedicated inspection ring reduces subjective judgement, shortens inspection times and lowers the risk of downstream rework. The pass/fail principle supports high throughput while keeping quality documentation straightforward. Robust construction for consistent results Manufactured from hardened gauge steel, the ring is sized for stability and wear resistance so that dimensional drift over repeated use is minimised. The compact mass (approx. 0.19 kg) and right‑hand thread orientation make it straightforward to handle in crowded inspection benches and small jig stations. The hardened material and conservative manufacture tolerances extend service life and preserve the calibration interval, translating into fewer replacements and predictable inspection costs for the workshop. Practical benefits for workshop and production flow This check ring integrates easily into standard inspection routines for component suppliers, maintenance departments and machining cells; compatibility with M16×2 ISO metric threads means it fits a broad range of fasteners and turned parts. The fast go/no‑go result enables operators to act immediately—segregating conforming parts from non‑conforming ones without time‑consuming measurements. Combined with Metav Werkzeuge’s stocking and logistics, the gauge supports reliable supply and consistent traceability across production batches. Speak to Metav Werkzeuge to arrange procurement and to confirm fitment of the DIN 13 6g M16×2 Go ring gauge for your inspection workflow Technical Data Article number: M315.116 GTIN: 4054469124162 SKU: M315.116 Weight: 0.19 kg Thread size: M16 × 2 Material: gauge steel, hardened Standard: DIN 13, 6g Type: Go (acceptance) ring gauge Direction: right‑hand Tariff number: 90173000 Core measurements Nominal diameter: M16 Pitch: 2 mm Tolerance class: 6g Mass: 0.19 kg eClass: 21170214 Special features Hardened gauge steel for wear resistance Right‑hand thread orientation Designed for ISO metric thread inspection Compact and lightweight for bench use Intended for pass/fail production checks FAQ What does "Go" mean for this thread ring gauge? A "Go" ring gauge confirms whether an external thread meets the lower limit of the specified tolerance; the Thread ring gauge M16 × 2 mm (Go) passes correct parts and flags those that are undersized or otherwise non‑conforming. Which standard does the gauge follow? The ring is manufactured to DIN 13 with a 6g tolerance, which corresponds to the standard ISO metric thread fit used across engineering and fastener production. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for dimensional stability and wear resistance so that the M16×2 check remains accurate over many cycles. Is this gauge suitable for high‑volume production checks? Yes, the right‑hand M16×2 Go gauge is intended for repetitive pass/fail inspection and is suitable for inline or batch checks where rapid decisions and consistent reproducibility are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16x2 Thread Ring Gauge Right-Hand ISO Metric Regular Thread DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
With a hardened gauge‑steel body and conformity to DIN 13 tolerance class 6g, this ring gauge offers fast, repeatable verification of ISO metric external threads and helps reduce inspection time and scrap. Order directly via Metav Werkzeuge or consult our specialists for application support and availability. Thread ring gauge M16 × 2 mm (DIN 13, 6g) — hardened gauge steel by Metav IndustryLine the Thread ring gauge M16 × 2 mm is a precision limit gauge for rapid inspection of ISO metric, right‑hand external threads in production and quality control Hardened gauge steel construction DIN 13 tolerance class 6g For M16 × 2 mm ISO metric threads Right‑hand limit (no‑go) verification Fast, standardised inspection that keeps production moving A compact, hardened ring gauge speeds up routine checks by providing a clear acceptance criterion for external threads. Built to DIN 13 with tolerance class 6g, the gauge supports consistent decision‑making at the inspection point: components either pass the limit test or are flagged for further evaluation. The hardened gauge‑steel body ensures dimensional stability under repeated use, lowering the risk of false rejects and helping to maintain a steady production workflow. Clear verification of ISO metric M16 × 2 threads Designed specifically for M16 × 2 mm ISO metric threads in a right‑hand configuration, the instrument is intended as a limit (no‑go) ring for quick go/no‑go checks on external threads. The tolerance marking 6g indicates the manufacturing tolerance band inspected by this gauge; using a dedicated limit gauge reduces interpretation errors that can occur with visual measurement and speeds up throughput in assembly or incoming‑goods inspection. Robust handling and practical shop‑floor benefits Made from hardened gauge steel, the gauge combines wear resistance with a compact 0.2 kg mass for easy handling during repetitive checks. Its simple, one‑step application minimises operator time per part and integrates well into conveyor or workstation inspection routines. Supplied for direct use in production, the device supports reliable quality gates and contributes to reduced rework and fewer downstream failures, backed by Metav’s distribution and technical competence for European workshops. For immediate supply or product advice on the Metav IndustryLine thread ring gauge, contact Metav Werkzeuge for availability, technical guidance and order processing. Technical Data Article number: M315.216 GTIN: 4054469125824 Manufacturer: Metav IndustryLine Material: Hardened gauge steel Thread: M16 × 2 mm Standard: DIN 13, 6g Weight: 0.2 kg Tariff code: 90173000 Core data Thread size: M16 × 2 mm Pitch: 2 mm Tolerance class: 6g Hand: Right‑hand Special features Limit (no‑go) ring gauge configuration For inspection of ISO metric external threads Category: Gauges, ring gauges Material: hardened gauge steel FAQ What is this ring gauge used for? This ring gauge is intended for rapid inspection of external ISO metric threads; the M16 × 2 mm configuration checks right‑hand threads and is supplied as a limit gauge (SKU M315.216) by Metav IndustryLine. Which standard and tolerance class does it follow? The gauge conforms to DIN 13 and is specified for tolerance class 6g, providing a clear manufacturing acceptance band for M16 × 2 threads. Is this a go or no‑go instrument? The item is supplied as a limit (no‑go) ring gauge for rejection verification, enabling quick go/no‑go decisions during shop‑floor inspections. How should the gauge be handled and stored? The gauge is made of hardened gauge steel; keep it clean, dry and protected from impact, and store it in a designated location to preserve dimensional integrity. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16×1 Thread Go Ring Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of a compact inspection tool that combines adherence to DIN 13 tolerances with a hardened gauge‑steel construction for long service life; the M16 x 1 mm specification ensures conformity checking of metric ISO fine threads, while Metav Werkzeuge can advise on matching gauges and supply logistics. Thread ring gauge M16 x 1 mm (DIN 13, 6g) — hardened gauge steel, right-hand A Thread ring gauge M16 x 1 mm for fast conformity checks of metric ISO fine external threads in production, assembly and inspection environments. DIN 13 standard, tolerance 6g Hardened gauge-steel construction For M16 x 1 mm metric ISO fine threads Right-hand thread inspection Consistent conformity to DIN 13 for dependable results The ring is manufactured to DIN 13 with a 6g tolerance, providing a measurable and repeatable basis for thread verification. This standardised specification means the gauge supports objective go/no-go decisions in quality control and is suitable for production batches where traceable conformity is required. The clear linkage between the gauge geometry and the DIN tolerance reduces ambiguity during inspection and simplifies documentation in quality records, supporting reproducible acceptance criteria and fewer downstream rejects. Durable material and compact handling for workshop use Constructed from hardened gauge steel, the gauge offers reliable resistance to wear and mechanical distortion during repeated use. The compact mass (approx. 0.13 kg) and robust finish deliver a tool that is easy to handle at the inspection bench yet built to withstand the demands of frequent checks. The hardened material reduces the need for frequent replacement, lowering lifecycle costs and ensuring consistent thread verification over an extended service life. Designed for efficient thread inspection in production workflows The device is optimised for checking M16 x 1 mm metric ISO fine external threads and is configured for right-hand threads, making it straightforward to integrate into standard assembly, maintenance and incoming‑goods inspections. The simple, tactile nature of a ring gauge accelerates throughput on the shop floor: operators can confirm conformity without complex setup, which shortens cycle times and contributes to overall process efficiency. Where rapid, repeatable checks are required, a dedicated thread gauge is often the most effective solution. Supply confidence and partner advantages from Metav IndustryLine Sourcing gauges from the Metav IndustryLine range aligns with a supplier philosophy focused on accessible precision and dependable logistics. Metav’s established presence and broad product range mean procurement teams can consolidate suppliers while retaining traceability and quality oversight. For production planners and quality engineers, this reduces the administrative burden and supports a resilient supply chain for precision measuring tools. Request specialist advice from Metav Werkzeuge to specify the correct ring gauge or to secure the M315.216.4 for your inspection routine Technical data Article number: M315.216.4 GTIN: 4054469125848 Manufacturer: Metav IndustryLine Facts Thread size: M16 x 1 mm Weight: 0.13 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Thread standard: DIN 13 Tolerance class: 6g Thread direction: right-hand Category: gauges / inspection tools FAQ What tolerance and standard does the gauge check to? The ring conforms to DIN 13 and is manufactured to the 6g tolerance class for metric ISO fine external threads. Is this gauge suitable for left‑hand threads? This particular item is specified for right‑hand threads; left‑hand variants are available separately if required. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability during repeated inspections. Which SKU should be ordered for an M16 x 1 mm thread ring gauge? Order the Metav IndustryLine ring with SKU M315.216.4 for the M16 x 1 mm, DIN 13, 6g right‑hand thread specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M16×1.5 Thread Ring Gauge Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise acceptance testing and robust construction to keep thread inspection fast and repeatable; the combination of DIN 13 conformity and hardened gauge steel ensures stable results for metric fine threads — order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M16 x 1.5 (Go) — hardened gauge steel, DIN 13 — Metav IndustryLine The Thread ring gauge M16 x 1.5 (Go) is a precision acceptance gauge for rapid go/no-go checks of right‑hand metric ISO fine threads in production and inspection environments. M16 x 1.5 metric ISO fine thread Precision to DIN 13, tolerance 6g Hardened gauge steel construction Right-hand go ring for acceptance checks Fast, standards-based acceptance testing for fine threads The primary advantage of this ring is its clear conformity to DIN 13 with a tolerance class of 6g, which allows efficient go/no-go verification of metric fine threads such as M16 x 1.5. Used as a go ring, the device confirms whether a threaded part meets internal diameter and pitch specifications; the simple mechanical pass/fail result reduces inspection time and removes interpretation errors. This rational approach to in‑process control supports consistent throughput in machining or assembly operations and reduces the risk of scrap caused by uncertain thread fits. Durable construction that sustains repeated use on the shop floor Manufactured from hardened gauge steel, this ring gauge resists wear and preserves the measuring contour under frequent handling. The robust material choice maintains dimensional stability, so acceptance criteria remain reliable across production batches — a direct benefit for process reliability and lifetime cost of ownership. At approximately 0.19 kg the gauge is compact and easy to handle during batch sampling, enabling quick checks without specialist tooling. The result is fewer interruptions to production and a long service life that supports predictable inspection schedules. Ready integration into quality workflows and traceable inspection routines Designed as a right‑hand metric ISO fine thread ring, this gauge is suited to incoming goods inspection, final part verification and spot checks on the shop floor. Its straightforward mechanical function makes it compatible with standard quality procedures and visual inspection stations; the product is identified as SKU M315.116.6 within the Metav IndustryLine offering. For organisations seeking documented traceability, the clear reference to DIN standards simplifies audit trails and helps maintain conformity across suppliers and production sites while supporting efficient decision‑making in quality management. For assured thread inspection and workshop reliability choose the Metav IndustryLine M16 x 1.5 go ring — contact Metav Werkzeuge in Emmerich for technical clarification and tailored delivery options Technical data SKU: M315.116.6 GTIN: 4054469124193 eClass: 21170214 Thread size: M16 x 1.5 Standard: DIN 13, 6g Weight: 0.19 kg Tariff number: 90173000 Facts Diameter/pitch: M16 x 1.5 Tolerance class: 6g Weight: 0.19 kg Special features Material: hardened gauge steel Right-hand metric ISO fine thread Go (acceptance) ring gauge Category: gauges / ring gauges FAQ What does the 'Go' designation indicate for this ring gauge? The 'Go' designation means the ring is intended for acceptance testing: if a threaded component fits the Thread ring gauge M16 x 1.5 (Go), the thread meets the minimum dimensional criteria defined by DIN 13 and the part passes the go/no-go check. Which standard and tolerance class apply to this gauge? This ring complies with DIN 13 and is manufactured to tolerance class 6g, providing a recognised benchmark for metric ISO fine thread acceptance. What material is used and how does that affect durability? Constructed from hardened gauge steel, the gauge offers high wear resistance and dimensional stability, ensuring that the inspection contour remains reliable under frequent use in production environments. Can this gauge be used for incoming goods inspection and process control? Yes, the mechanical go/no-go function of this ring makes it suitable for incoming goods checks, spot inspection and routine process control; the item is listed as SKU M315.116.6 in the Metav IndustryLine range. Is the gauge suitable for right-hand threads only? This particular ring is produced for right‑hand metric ISO fine threads with the size M16 x 1.5 and is intended for corresponding applications where right‑hand threads are present. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com