Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M2 x 0.4 Thread Go Ring Gauge Metric ISO Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a compact, standard‑conforming inspection solution that combines DIN 13 traceability, hardened gauge steel durability and a precise fit for small metric threads — order directly via Metav Werkzeuge or consult our specialists for application advice. Thread Go Ring Gauge M2 x 0.4 mm — Go ring gauge, DIN 13, right-hand (Metav IndustryLine) The Thread Go Ring Gauge M2 x 0.4 mm gives a fast go/no‑go check for external metric ISO threads during incoming inspection and assembly verification Hardened gauge steel for wear resistance Conforms to DIN 13, tolerance class 6g Designed for metric ISO M2 x 0.4 threads Precise acceptance checks for small metric threads A Go ring gauge is the standard tool for rapid acceptance testing of external threads; it confirms that a threaded part falls within the lower limit of the tolerance band and is therefore acceptable for assembly. The supplied gauge is sized M2 x 0.4 mm and produced to DIN 13 with tolerance class 6g, which makes it suitable for routine production checks and spot inspection in mechanical engineering and electronics assembly. Manufactured from hardened gauge steel, the ring resists wear during repetitive use and maintains wear resistance that preserves the acceptance limit over time. For small threads where interchangeability and fit are critical, the gauge offers a clear, objective criterion for pass/fail decisions. Streamlined quality control that reduces rework Integrating a compact thread gauge into a control routine reduces subjective gauging and shortens inspection cycles. The lightweight construction (approx. 0.01 kg) and concise design allow quick handling at test benches and workstations, while the tangible pass result avoids time‑consuming measurements when a simple acceptance decision suffices. The item is catalogued as M315.102 for easy ordering and inventory management. Conformity with metric ISO standards supports downstream assembly and helps limit rework, rejects and costly adjustments, delivering measurable efficiency gains in small‑component manufacture. Practical use and interpretation in the workshop The ring is a right‑hand thread gauge intended for acceptance testing of regular metric threads. A successful 'go' trial means the external thread meets the minimum material condition for proper assembly; the gauge does not measure pitch diameter directly but serves as a go/no‑go comparator in accordance with the stated tolerance class. Care and storage extend service life: keep the gauge clean, protect the thread profile from impact, and avoid exposure to corrosive environments. As a standard‑compliant gauge in the broader category of inspection tools, it complements micrometres and comparators where dimensional traceability and quick decision‑making are required. Contact Metav Werkzeuge for tailored advice on implementing the M315.102 Thread Go Ring Gauge in production or inspection workflows — Metav Werkzeuge can advise on batch availability and suitable companion gauges Technical Data Article number: M315.102 GTIN: 4054469123646 Weight: 0.01 kg Material: gauge steel, hardened Standard: DIN 13, 6g Thread: M2 x 0.4 mm Type: Go ring gauge (acceptance) Hand: right‑hand Facts Weight: 0.01 kg Thread size: M2 x 0.4 mm Tariff code: 90173000 ECLASS: 21170214 GTIN: 4054469123646 Special features Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Right‑hand metric ISO regular thread 'Go' acceptance ring for external threads Category: Gauges / Inspection tools FAQ What does the 'Go' designation mean for this gauge? The 'Go' designation indicates the ring verifies that an external thread meets the lower limit of the tolerance; the part passes if the gauge fully engages without force. Is a calibration certificate supplied with this ring gauge? A calibration certificate is not included by default; the gauge is supplied as an inspection tool and calibration options can be requested separately where required. Which materials and applications suit this gauge? This ring gauge is intended for inspection of small metric ISO threads such as those found in electronics, miniature assemblies and precision fasteners; material of the measured part is not restricted by the gauge itself. How should the ring gauge be maintained to preserve accuracy? Keep the gauge clean and dry, avoid knocks and store protected from dust; routine visual inspection for wear is recommended to ensure continued acceptance reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2.5x0.35 Thread Ring Gauge Metric ISO Fine Thread Right Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge steel construction and strict DIN 13 (6g) tolerance for reliable inspection of fine metric threads; the compact format and light weight simplify shop‑floor handling. Order directly via Metav Werkzeuge or ask the consultants for application guidance. Thread ring gauge M2.5 x 0.35 (DIN 13, 6g) — Metav IndustryLine Thread ring gauge M2.5 x 0.35 (DIN 13, 6g) for verification of metric ISO fine threads in right‑hand form Hardened gauge steel construction Conforms to DIN 13 tolerance class 6g Metric fine thread M2.5 x 0.35 Compact, lightweight design Precision where fine threads matter The ring is manufactured from hardened gauge steel, offering a stable reference surface that resists wear during repeated checks. For small‑pitch components such as miniature screws or precision fastenings, the combination of the M2.5 x 0.35 profile and the DIN 13 (6g) tolerance class provides a reproducible pass/fail criterion that supports fast quality decisions. This leads to fewer rework cycles and more predictable assembly performance when small threaded parts are critical to the product function. Robust build for routine inspection A compact, low‑mass gauge reduces handling fatigue and permits quick, single‑operator checks across batches. The material choice and heat treatment deliver longevity under shop conditions, so the gauge maintains its form even with frequent use. The lightweight form factor also helps when integrating manual inspection into assembly or incoming goods control, making thread verification both efficient and durable without the need for complex fixtures. Seamless integration into quality workflows The ring is designed for immediate use in inspection benches and hand‑held checks and suits quality procedures that rely on clear go/no‑go outcomes. Marking and traceable identifiers ensure each gauge can be logged in inspection records alongside batch data, supporting process control and audit trails. For customers seeking a practical, standards‑aligned measure, this gauge streamlines acceptance routines and reduces uncertainty in thread verification. Contact Metav Werkzeuge today for specification advice or to discuss how the Metav IndustryLine ring gauge can be integrated into existing inspection plans Technical data Article number: M315.202.6 SKU: M315.202.6 GTIN: 4054469125343 Facts Thread size: M2.5 x 0.35 Tolerance class: 6g (DIN 13) Weight: 0.1 kg Tariff number: 90173000 Special features Material: hardened gauge steel Thread form: metric ISO fine thread, right‑hand Category: thread ring gauge for inspection FAQ What size of thread does this ring gauge check? The ring gauge checks a metric fine thread of M2.5 x 0.35, specified to DIN 13 tolerance class 6g for right‑hand threads. Is this gauge suitable for frequent shop‑floor use? Yes, the hardened gauge steel construction and compact design of this Metav IndustryLine ring gauge (SKU M315.202.6) make it suitable for routine inspections and repeated handling. Which standard does the ring gauge conform to? The component is manufactured to DIN 13 with a tolerance class of 6g, ensuring compatibility with common ISO metric thread inspection procedures. Can this ring gauge be used for audit documentation? The ring gauge can be recorded in inspection logs and linked to traceable identifiers for audit trails; its clear pass/fail criterion supports objective acceptance records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2.5x0.35 Thread Ring Gauge Right-Hand ISO Metric 6g Hardened Gauge Steel DIN 13 - Metav IndustryLine
Robust inspection in a compact form: hardened gauge steel construction and DIN 13 (6g) conformity ensure reliable verification of metric fine threads; order the gauge directly via Metav Werkzeuge or contact the consultants for application advice. Thread Gauge Ring M2.5 x 0.35 mm 'Go' — Metav IndustryLine The Thread Gauge Ring M2.5 x 0.35 mm 'Go' is a hardened inspection ring for fast verification of metric ISO fine threads in production and quality control environments. Hardened gauge steel construction DIN 13 conformity, tolerance 6g Go ring for M2.5 x 0.35 metric fine thread Lightweight 0.01 kg for convenient handling Reliable conformity checking for fine threads The compact ring is designed for efficient pass/fail checks of fine metric threads. Made from hardened gauge steel, the gauge provides tactile and repeatable contact that helps maintain consistent inspection criteria on the shop floor. Conformity with DIN 13 and the 6g tolerance class ensures compatibility with common ISO metric fine-thread specifications; this reduces uncertainty in acceptance decisions and simplifies process documentation. The ring format is especially suitable where thread fit must be confirmed quickly without complex measuring equipment, preserving throughput in assembly and inspection routines. Straightforward inspection workflow, minimal handling effort With a nominal size of M2.5 x 0.35, the ring supports fast go/no‑go assessment of mating threaded parts. The lightweight construction (approx. 0.01 kg) and compact geometry make the gauge easy to position, speeding up repetitive checks and lowering operator fatigue. Using a dedicated go ring shortens inspection cycles compared with full dimensional measurement, delivering a clear rational benefit: faster throughput with reliable acceptance criteria. The simple procedure also reduces interpretation variance between operators, improving inter‑operator repeatability in production sampling. Durable finish for routine workshop use The ring is finished to withstand frequent use and is categorised for metric ISO fine threads with right‑hand orientation. The go designation signifies that the ring must pass freely onto an acceptable external thread; this direct functional statement aids historical traceability during batch inspections. Constructed from hardened material, the gauge resists wear and preserves its functional dimension over extended service life, supporting continuous quality assurance without frequent replacement. Where traceable standards are required, the specification and markings allow integration into inspection logs and goods‑in procedures. Contact Metav Werkzeuge today to equip your inspection bench with Metav IndustryLine thread gauges — Metav Werkzeuge GmbH in Emmerich can advise on suitability and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.102.6 GTIN: 4054469123677 SKU: M315.102.6 Facts Weight: 0.01 kg Thread size: M2.5 x 0.35 mm Tariff number: 90173000 Tolerance class: 6g (DIN 13) Special features Material: hardened gauge steel Type: Go ring (gut) Thread direction: right-hand Application: metric ISO fine threads Categories: Lehren, Messstifte Brand: Metav IndustryLine FAQ What thread size and pitch does the gauge check? The Thread Gauge Ring M2.5 x 0.35 mm 'Go' verifies an external metric thread of M2.5 with a 0.35 mm pitch for ISO fine‑thread applications. What does the 'Go' designation mean for this ring? A Go ring is intended to pass freely onto a mating external thread that meets the specified tolerance; the ring confirms that the thread is within acceptable limits for assembly. Which standard and tolerance class apply to this gauge? The gauge is manufactured in accordance with DIN 13 and corresponds to the 6g tolerance class for metric ISO threads. What material is the gauge made from and why is that important? The ring is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure long service life and consistent inspection results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2.5x0.35mm Go/No-Go Thread Plug Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Data inconsistency detected: the product data contains conflicting quality flags ('ausschuss' marked true while 'gut' is also true). This issue indicates a contradiction in the classification of the item, which needs immediate attention to ensure accurate processing. Please clarify whether the item is classified as scrap or as good, as this discrepancy prevents the generation of a reliable product description. Without resolving this conflict, it is impossible to proceed with further steps that depend on the item's quality status. Kindly review the data and provide confirmation or corrections to facilitate the resolution of this matter effectively.
M2.5x0.45 Metric Go/No-Go Thread Ring Gauge Right-Hand DIN 13, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise thread control, robust hardened‑steel construction and conformity to DIN 13 for reliable rejection checks in production; order the matching gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M2.5 x 0.45 — No‑Go, DIN 13, 6g (Metav IndustryLine) A Thread ring gauge M2.5 x 0.45 designed for verification of metric ISO external threads, right‑hand execution, ideal for workshop and production inspection No‑Go gauge for M2.5 × 0.45 Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g Compact and easy to handle at 0.1 kg Ensure rejected parts do not pass assembly The No‑Go function offers a clear, objective decision criterion during routine inspections: the ring must not engage on correctly manufactured screws. Built to check metric ISO external threads, the gauge provides a fast acceptance check that reduces downstream assembly faults and rework. With the M2.5 x 0.45 designation and 6g tolerance class, the tool targets common small‑thread fasteners found across electronics and precision assemblies, ensuring dimensional control where space and tolerance demand are tight. Durable material and standard conformity for repeatable results Manufactured from hardened gauge steel, the component resists wear under frequent use and maintains a stable reference geometry for longer intervals between calibrations. Conformity to DIN 13 assures compatibility with established thread geometry tables and metrology routines, making the device suitable for inline quality checks and off‑line sampling alike. The compact mass and robust finish allow operators to handle the ring without excessive distortion, supporting reproducible inspection outcomes in routine production environments. Practical integration into quality workflows The compact ring serves as a rapid verification tool for incoming inspection, in‑process control and final quality gates. Its clear pass/fail characteristic simplifies operator training and reduces decision latency on the shop floor, contributing to higher throughput with fewer scrapped assemblies. Traceability is supported by the item’s SKU and GTIN in procurement records, while the simple mechanical principle complements digital measurement systems as a fast, low‑cost rejection safeguard. For procurement or technical guidance on integrating the Metav IndustryLine No‑Go thread ring gauge M2.5 x 0.45 into quality processes, contact Metav Werkzeuge for supply or detailed application advice Technical data SKU: M315.202.5 GTIN: 4054469125336 Mass / designation: M2.5 × 0.45 Weight: 0.1 kg Manufacturer: Metav IndustryLine Tariff number: 90173000 Numbers / Core technical data Thread size: M2.5 × 0.45 Tolerance class: 6g Weight: 0.1 kg Special features / Materials Material: hardened gauge steel Right‑hand metric ISO external thread Conforms to DIN 13 Function: No‑Go (reject) ring gauge Category: Gauges / Ring gauges FAQ What is the intended use of this ring gauge? The ring gauge is intended for quick rejection checks of external metric ISO threads; the M2.5 x 0.45 No‑Go ring gauge prevents oversized or non‑conforming screws from passing inspection. Which tolerance class does the gauge represent? This Metav IndustryLine thread ring gauge is produced to 6g tolerance in accordance with DIN 13, matching common manufacturing standards for metric threads. What material is the gauge made from and why does it matter? The gauge is manufactured from hardened gauge steel, chosen for wear resistance and stable reference geometry to ensure repeatable inspection results over time. Can this gauge be used for left‑hand threads? No; this ring gauge is specified for right‑hand metric ISO threads and should not be used for left‑hand threaded parts. How is a No‑Go ring gauge used in practice? The No‑Go ring should not screw onto a correctly manufactured external thread; if engagement occurs, the fastener fails the inspection and is rejected. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2.5x0.45 Thread Go Ring Gauge ISO Metric Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and DIN 13 tolerance class 6g for reliable acceptance testing of M2.5 x 0.45 mm metric threads; choose the ring gauge where repeatable, simple go/no-go verification keeps production moving. Order the gauge directly via Metav Werkzeuge or consult our advisors for application support. Go thread ring gauge M2.5 x 0.45 mm — hardened gauge steel, DIN 13 (6g) — Metav IndustryLine The Go thread ring gauge M2.5 x 0.45 mm is a compact inspection tool designed for fast verification of metric ISO standard threads in production and quality control environments. Hardened gauge-steel construction Conforms to DIN 13, tolerance 6g For M2.5 x 0.45 mm metric ISO threads Right-hand thread verification Rapid, reliable acceptance checking for small threads The ring serves as a straightforward physical comparator for thread acceptance: a part that passes the go ring meets the minimum material and form requirements for the specified size and tolerance. Manufactured from hardened gauge steel, the gauge is dimensionally stable and resists wear, which preserves accuracy during repetitive use. Compliance with DIN 13 and tolerance class 6g provides a recognised, machine-shop-ready reference; this means threads are evaluated against an established acceptance band rather than a subjective feel, reducing scrap and rework in assembly processes. Practical integration into workshop inspection routines Designed for quick handling, the gauge supports high-throughput checks at the machining centre or final inspection bench. The light weight and compact form make it suitable for use with small batches and series production alike, while the right-hand orientation matches standard thread production. Using a physical ring for pass/fail testing minimises interpretation time compared with microscopic or tactile methods and accelerates sorting during production runs. For traceable documentation, refer to the SKU when recording inspection tools in quality logs. Durability and repeatability for everyday metrology Long-term reproducibility is ensured by the material choice and machining process: the hardened body maintains a stable profile under normal workshop conditions, so repeated inspections remain consistent. As a go gauge, the component is intended to verify conformance rather than measure a continuous value, making it particularly effective for accept/reject decisions on turned or milled threaded components. The gauge is a pragmatic addition to any metrology arsenal where small metric threads are frequent and process reliability is essential; the item is identified internally as SKU M315.102.5 for ordering and stock control. Contact Metav Werkzeuge in Emmerich for application guidance, availability and integration advice on Metav IndustryLine thread gauges — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss production checks and logbook entries. Technical data Article number: M315.102.5 GTIN: 4054469123660 Material: hardened gauge steel Thread size: M2.5 x 0.45 mm Standard: DIN 13, 6g Weight: 0.01 kg Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Nominal size: M2.5 Pitch: 0.45 mm Tolerance class: 6g Weight (net): 0.01 kg GTIN: 4054469123660 Special features Go ring gauge for pass/fail checks Right-hand thread orientation Hardened, wear-resistant construction Application: metric ISO regular threads Category: gauges / inspection tools FAQ What does the "go" designation mean for this ring gauge? The go designation indicates the ring is used for acceptance testing: a threaded part that enters the go ring meets the minimum boundary conditions for the specified size and tolerance. Which standards does this gauge comply with? This gauge is manufactured to DIN 13 with tolerance class 6g, providing a standardised reference for metric ISO regular threads. Is the gauge suitable for left-hand threads? No, this particular ring is for right-hand threads; left-hand versions must be specified separately. What material is the gauge made from and why does that matter? The ring is made from hardened gauge steel, chosen for dimensional stability and wear resistance so that repeated inspections remain consistent. How should the gauge be recorded in inspection documentation? Record the SKU M315.102.5 and the GTIN 4054469123660 in internal tool registers and inspection logs to ensure traceability and maintenance scheduling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2.5×0.45 mm Limit Thread Plug Gauge Metric ISO 6H Right-Hand Hardened Gauge Steel DIN 13 - Metav IndustryLine
Take advantage of the combination of traceable compliance, compact handling and durable construction to speed up routine thread checks on small metric parts. Order the item directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Thread limit plug gauge M2.5 x 0.45 — right-hand, Metav IndustryLine A thread limit plug gauge M2.5 x 0.45 designed for fast go/no-go verification of metric ISO standard threads in production and incoming inspection. Right-hand metric ISO thread M2.5 x 0.45 Hardened gauge steel for long service life Conforms to DIN 13 with 6H tolerance Compact, lightweight design 0.02 kg Fast, reliable pass/fail control for small-thread production This plug gauge provides an efficient, tactile method for verifying metric ISO threads during production and quality control. The defined size M2.5 x 0.45 and tolerance class 6H enable immediate go/no-go decisions, reducing inspection time compared with full-form measurement. As a simple verification tool, it supports high-throughput checks and helps to avoid costly rework by catching out-of-spec threads at the earliest stage. The clear conformity to DIN 13 makes it straightforward to document compliance in inspection records. Robust construction for repeatable results and low life-cycle cost Manufactured from hardened gauge steel, this gauge is resistant to wear and maintains its mating geometry through many inspection cycles. The compact form and low mass (approx. 0.02 kg) reduce operator fatigue and allow convenient placement at the inspection station or in a portable inspection kit. Because the gauge is a dedicated limit tool rather than an adjustable instrument, repeatability is intrinsic: each check is a binary control that does not require recalibration between individual measurements under normal use, which contributes to predictable inspection throughput and lower maintenance effort. Simple integration into workshop and incoming-inspection routines The design suits small-part workflows in assembly, fastener manufacture and incoming inspection of bought-in components. The plug gauge supports quick operator training, clear pass/fail interpretation and effortless record keeping when combined with barcode or SKU tagging. The compact gauge is ideal where bench space is limited but process reliability is essential. For documentation, use the item identifiers provided to link results to batches and suppliers for traceability and audit purposes. For assured conformity with metric ISO threads, request Metav IndustryLine gauges through Metav Werkzeuge — Metav Werkzeuge provides technical guidance and stock availability from Emmerich for immediate deployment. Technical data Article number: M315.002.5 GTIN: 4054469121994 Tariff number: 90173000 ECLASS: 21170235 Numbers / Core technical data Thread size: M2.5 x 0.45 Weight: 0.02 kg Tolerance class: 6H Special features Right-hand metric ISO thread Hardened gauge steel Standard: DIN 13 Category: Gauge / Plug gauge Application: Go/no-go verification of metric threads FAQ What thread standard does this gauge check? The answer: The gauge checks metric ISO standard threads in accordance with DIN 13 and the supplied tolerance class 6H for the specified size. Is this a right-hand or left-hand gauge? The answer: This is a right-hand plug gauge and is intended for verifying standard right-hand metric threads. What material is the gauge made from? The answer: The gauge is produced from hardened gauge steel, chosen for wear resistance and dimensional stability. Can this gauge be used for production line checks? The answer: Yes — the plug gauge M2.5 x 0.45 is suitable for rapid go/no-go checks in production and incoming inspection workflows. How is the item identified for inventory and traceability? The answer: Use the article number M315.002.5 and GTIN 4054469121994 to link inspection results and maintain traceability records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20 x 0.5 Thread Ring Gauge Go, Metric ISO Fine Thread Right Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of precise pass/fail verification, hardened gauge steel construction and conformity to DIN 13 (6g) for reliable thread inspection across production runs; order the gauge directly via Metav Werkzeuge or consult the team for technical advice. Thread plug gauge M20 x 0.5 mm — Go gauge for metric ISO fine threads, right-hand, DIN 13 (6g) The Thread plug gauge M20 x 0.5 mm is a hardened go gauge designed for rapid acceptance testing of right-hand metric ISO fine threads in production and quality control environments. Hardened gauge steel construction DIN 13 tolerance class 6g For M20 x 0.5 metric fine threads Lightweight 0.14 kg for easy handling Fast, unambiguous pass/fail inspection that saves time The primary purpose of this gauge is a clear and repeatable go/no-go decision at the workstation. As a Go gauge, the tool verifies that an internal thread meets the dimensional and tolerance band specified by DIN 13 for tolerance class 6g, using the nominal size M20 x 0.5. Employing a dedicated plug gauge for this task reduces inspection time compared with full metrological measurement, removes operator doubt during series checks and integrates easily into inline quality routines. The result is a measurable improvement in throughput and fewer ambiguous inspection outcomes. Robust construction for sustained workshop use Made from hardened gauge steel, the plug gauge is built to withstand repeated engagement without significant wear, ensuring long service life and stable inspection results. The compact mass of 0.14 kg simplifies handling during frequent checks and reduces operator fatigue when used across multiple machines or assembly stations. The hardened finish contributes to corrosion resistance in ordinary workshop conditions and maintains dimensional stability under regular use, which supports consistent quality control without frequent replacement. Practical fit for production, service and tooling stores This plug gauge suits applications in machining, assembly and incoming inspection where metric ISO fine threads are present. The right‑hand M20 x 0.5 profile is common in precision assemblies and fine-thread fastenings; having a dedicated go gauge avoids costly rework by catching out-of-tolerance threads at the earliest stage. Supplied as a single-purpose inspection tool, it is straightforward to store in a tool cabinet or bench kit and to integrate into standard operating procedures. As part of the Metav IndustryLine range, it reflects the supplier’s commitment to making precision tools accessible to workshops and industry alike. For dependable thread verification order the Metav IndustryLine M20 plug gauge from Metav Werkzeuge — contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for delivery and stock information Technical data Article number: M315.120.2 SKU: M315.120.2 GTIN: 4054469124285 Tariff number: 90173000 Facts Thread size: M20 x 0.5 Mass: 0.14 kg Tolerance class: 6g Special features Material: hardened gauge steel Standard: DIN 13 Type: right-hand metric ISO fine thread Function: Go (pass) gauge Category: Plug gauge / Gauge for internal threads FAQ What is the purpose of this plug gauge? The plug gauge M20 x 0.5 mm is a dedicated Go gauge for quick acceptance testing of internal threads to DIN 13 tolerance class 6g. Can this gauge be used for both inspection and setting up machines? Yes, the M20 plug gauge from Metav IndustryLine serves for rapid in-process inspection and can be used during setup to confirm thread form before production runs. What material is the gauge made from and why does it matter? The gauge is manufactured from hardened gauge steel, which ensures wear resistance and dimensional stability during repeated use. Does the gauge indicate tolerance class or only size? The plug gauge checks the internal thread against the nominal size M20 x 0.5 and the tolerance band of DIN 13 (6g); it provides a go/no-go decision rather than a dimensional measurement. How should the gauge be stored to maintain accuracy? Store the plug gauge dry, protected from impact and corrosive environments; repeated careless handling may shorten service life even though the tool is hardened. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20 x 0.75 Thread Ring Gauge, ISO Metric Fine Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise conformity to DIN 13 (6g), the robustness of hardened gauge steel and the compact handling of a lightweight ring gauge to secure consistent thread inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for integration advice. Thread ring gauge M20 x 0.75 mm (Go) – DIN 13, 6g – Metav IndustryLine The Thread ring gauge M20 x 0.75 mm (Go) is a hardened inspection tool for verifying right‑hand metric ISO fine external threads in production and quality control environments. DIN 13 standard, tolerance class 6g Hardened gauge steel for long life Go ring gauge for M20 x 0.75 threads Right-hand metric ISO fine thread Ensure repeatable acceptance checks with standard compliance The ring gauge is manufactured to DIN 13 with 6g tolerance, providing a clear, standardised reference point for Go/No‑Go inspection regimes. As a Go ring gauge, it confirms that external threads meet the minimum form and pitch criteria; acceptance is immediate when the part engages the gauge. This direct verification method reduces ambiguity in inspection results and speeds up throughput on assembly lines or inspection benches. Robust construction for stable measurements over time Made from hardened gauge steel, the gauge resists wear and retains its reference geometry through repeated use. The material choice and heat treatment translate into fewer replacements and lower lifecycle costs compared with untreated tools. The compact mass of 0.14 kg aids ergonomic handling during repetitive checks while preserving the stiffness required for precise thread assessment. Practical fit for workshop and production environments Designed for M20 x 0.75 mm right‑hand metric ISO fine threads, the gauge suits fasteners and components common in precision engineering and mechanical assemblies. The external thread check performed with this ring gauge is straightforward to integrate into incoming inspection, in‑process verification or final acceptance routines. Clear conformity to a recognised standard simplifies documentation and audit trails in quality management systems. Benefits for quality assurance and process optimisation Using a calibrated, standardised Go ring gauge reduces uncertainty in pass/fail decisions and helps maintain consistent assembly quality. The simple mechanical nature of the tool requires no electronics or consumables, offering a low‑maintenance solution that supports high inspection rates. Where traceability is needed, Metav Werkzeuge can advise on complementing ring gauges with inspection plans and record‑keeping procedures. Contact Metav Werkzeuge for supply and technical advice on integrating the Metav IndustryLine M20 Go ring gauge into existing inspection routines Technical Data Article number: M315.120.3 GTIN: 4054469124292 Weight: 0.14 kg Thread size: M20 x 0.75 mm Norm: DIN 13, 6g Facts Tariff number: 90173000 Special features Material: hardened gauge steel Type: Go (acceptance) ring gauge Thread handedness: right-hand Application: metric ISO fine thread inspection FAQ What does the "Go" designation mean for this ring gauge? The "Go" designation indicates that this ring gauge checks whether an external thread meets the minimum acceptance dimensions; the threaded part must fully engage the gauge for a pass using the Metav IndustryLine M20 Go ring gauge. Is this gauge suitable for inspection of fine metric threads? Yes, the tool is specified for metric ISO fine threads with a pitch of 0.75 mm and is manufactured to DIN 13 tolerance class 6g. What material and treatment ensure durability? The gauge is made from hardened gauge steel, which provides wear resistance and maintains the reference geometry required for reliable inspections. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20x0.5 Limit Thread Plug Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Benefit from high reproducibility and long service life thanks to hardened gauge steel and conformity with DIN 13 tolerance class; precise thread checks are ensured while handling remains convenient due to the compact 0.2 kg mass. Order the limit thread plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit thread plug gauge M20 x 0.5 – right‑hand metric ISO fine thread, hardened gauge steel (Metav IndustryLine) The Limit thread plug gauge M20 x 0.5 is a right‑hand metric ISO fine‑thread inspection tool intended for quick go/no‑go verification of internal threads in production and quality control environments. Right‑hand M20 x 0.5 metric fine thread DIN 13, 6H tolerance class Hardened gauge steel construction Compact weight 0.2 kg for easy handling Reliable thread verification that reduces rework A go/no‑go plug gauge delivers immediate, objective pass/fail results; the limit thread plug gauge M20 x 0.5 provides exactly that for metric fine threads. Built to DIN 13, 6H, the gauge checks both conformity to the specified pitch and the functional fit of mating parts, removing ambiguity from visual inspection. The result is fewer incorrectly assembled pieces and less downstream rework, which supports leaner production flows and consistent component interchangeability. Robust construction for repeatable measurements Made from hardened gauge steel, the gauge resists wear and maintains its calibrated form over many inspection cycles, which keeps measurement uncertainty low. Its compact mass of 0.2 kg makes handling straightforward on the shop floor and at inspection benches; the compact design also minimises the risk of accidental damage during routine use. Using a dedicated limit plug gauge instead of improvising with measuring instruments speeds up throughput without compromising the reliability of the check. Clear integration into quality processes The tool is suitable for standard workshop and production checks where ISO‑conformant thread control is required. As a simple mechanical go/no‑go instrument, it complements optical and tactile inspection methods and is straightforward to document in quality records. The gauge’s specification—M20 x 0.5, right‑hand, DIN 13, 6H—makes it easy to reference in inspection plans and work instructions, supporting traceable and repeatable processes across shifts or production sites. Contact Metav Werkzeuge for a tailored quotation on the Metav IndustryLine limit thread plug gauge M20 x 0.5 and ensure traceable, workshop‑ready inspection tools are delivered promptly. Technical data SKU: M315.020.2 GTIN: 4054469122618 Material: gauge steel, hardened Standard: DIN 13, 6H Size: M20 x 0.5 Weight: 0.2 kg Facts eClass: 21170235 Tariff number: 90173000 Special features Right‑hand metric ISO fine thread Go/no‑go limit thread plug gauge Compact, shop‑floor handling Suitable for production and quality control inspections FAQ What does a go/no‑go plug gauge check? A go/no‑go plug gauge performs a quick functional check of internal threads: the “go” end verifies correct major diameter and pitch fit while the “no‑go” end detects oversize or out‑tolerance threads; the Limit thread plug gauge M20 x 0.5 follows this principle for fast decisions. Which tolerance class is provided by this gauge? The gauge is made to DIN 13, 6H, meaning it corresponds to the common metric tolerance for internal threads and is suitable for general engineering and assembly use. Is the gauge suitable for production use? Yes, the hardened construction and clear go/no‑go function make this gauge appropriate for routine production sampling and final inspection in workshop and factory environments. What material is the plug gauge made from? The tool is manufactured from hardened gauge steel, chosen for wear resistance and dimensional stability during repetitive use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20x0.5 Thread Gauge Ring ISO Metric Fine Right-Hand DIN 13, Hardened Gauge Steel - Metav IndustryLine
Taking advantage of a hardened gauge steel body, precise DIN 13 / 6g tolerance and an M20×0.5 fine‑thread form, this ring gauge ensures fast, repeatable go/no‑go checks on right‑hand metric threads; order the ring gauge directly via Metav Werkzeuge or consult the team for application advice. Thread ring gauge M20 × 0.5 mm – No‑go (right‑hand), hardened gauge steel (Metav IndustryLine) The Thread ring gauge M20 × 0.5 mm (No‑go) is a hardened ring gauge for quick verification of metric ISO fine threads to DIN 13 with a 6g tolerance, designed for right‑hand threads in production and inspection environments Hardened gauge steel construction For metric ISO fine thread M20×0.5 Conforms to DIN 13 tolerance 6g Fast, unambiguous thread inspection for production lines A No‑go ring gauge provides an immediate pass/fail decision without lengthy set‑ups or complex measuring programmes. The defined M20×0.5 thread form and the DIN 13 tolerance class 6g reduce interpretation variance and accelerate throughput when checking batches or incoming components. By replacing repetitive dimensional checks with a simple insertion test, inspection cycles become shorter and traceable process gates are established, supporting higher production efficiency and consistent quality control. Robust material and wear resistance for long service life Made from hardened gauge steel, the ring maintains thread form under frequent use and resists wear that can otherwise bias inspection results. The compact design and modest mass support easy handling at inspection benches and in-line stations; the durable finish helps to preserve the calibrated condition of the threaded gauge face. This construction lowers maintenance needs and prolongs service intervals, providing reliable repeatability over many inspection repetitions. Standards compliance to support quality documentation Manufactured to DIN 13 with a tolerance of 6g, this ring gauge aligns inspection procedures with industry norms for metric ISO fine threads. Using a dedicated No‑go gauge simplifies conformity checks during first article inspection and routine sampling, enabling straightforward documentation of non‑conforming parts. The clear standard reference assists in audit situations and in maintaining consistent acceptance criteria across suppliers and production sites. Practical handling and integration into workshop routines The ring gauge is designed for straightforward use on the shop floor: the right‑hand M20×0.5 form fits the relevant mating threads directly for instant verification. Light weight and a compact envelope make the tool easy to store in tool cabinets or inspection kits, while the rigid material supports repeatable tactile feedback during testing. As a purpose‑built verification tool, it minimises operator interpretation and integrates neatly into go/no‑go inspection plans or visual work instructions. Contact Metav Werkzeuge for application guidance or to arrange supply of the M20×0.5 No‑go ring gauge from stock in Emmerich; specialist advice is available for integration into quality routines Technical data Article number: M315.220.2 GTIN: 4054469125947 Weight: 0.12 kg Thread: M20×0.5 Tolerance class: 6g Standard: DIN 13 Material: gauge steel, hardened Thread direction: right‑hand Type: No‑go (reject) ring gauge Facts Nominal thread size: M20×0.5 Mass: 0.12 kg Tolerance: 6g Standard reference: DIN 13 Special features Hardened gauge steel construction Designed for metric ISO fine threads No‑go (reject) function for rapid pass/fail testing Compact, easy to handle on inspection benches FAQ What is the ring gauge used for? The ring gauge is a No‑go verification tool for M20×0.5 metric ISO fine threads; the M20×0.5 No‑go ring gauge (Metav IndustryLine, SKU M315.220.2) confirms whether a threaded part exceeds the permitted maximum material condition. Does the gauge comply with recognised standards? Yes, the tool is manufactured to DIN 13 and specified for tolerance class 6g to ensure compatibility with standard thread acceptance criteria. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so that the M20×0.5 profile remains accurate over long inspection cycles. Is this a go or a no‑go gauge? This product is a No‑go (reject) ring gauge intended specifically for detecting oversize or out‑of‑tolerance external threads on right‑hand metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20x0.75 Limit Thread Plug Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a hardened gauge steel construction and conformity to DIN 13, 6H for reliable thread acceptance tests; the compact M20 x 0.75 limit plug gauge delivers fast pass/fail control and long service life. Order the gauge directly via Metav Werkzeuge or contact the consultancy team for application advice. Limit thread plug gauge M20 x 0.75 — metric ISO fine internal thread, right-hand The Limit thread plug gauge M20 x 0.75 is a precision inspection tool for fast verification of metric ISO fine internal threads to DIN 13, 6H; designed as a right-hand, precision-ground plug for production and quality control. Limit plug gauge M20 x 0.75, metric ISO fine thread DIN 13, tolerance 6H for internal threads Hardened gauge steel for durable inspection Right-hand thread, precision-ground Rapid, unambiguous pass/fail checks at production speed A dedicated limit plug gauge provides immediate Go/No-Go decisions that reduce cycle times in assembly and inspection. The M20 x 0.75 size matches standard metric fine threads, while the compliance with DIN 13 and tolerance class 6H ensures that the gauge verifies internal threads against recognised workshop norms. Using a fixed master for thread acceptance eliminates interpretation variance and lowers scrap rates by identifying out-of-tolerance bores before they reach downstream operations. Durable build for repeated use in workshop environments Constructed from hardened gauge steel, the tool resists wear from regular engagement and preserves the functional profile over many inspection cycles. Precision grinding of the working surfaces provides consistent contact geometry, which maintains repeatability and reduces the need for frequent replacement. At approximately 0.2 kg the gauge is compact and easy to handle during manual checks, combining robust performance with practical ergonomics for bench inspection routines. Traceability, inventory integration and application clarity The device is supplied with clear identification for inventory and traceability purposes, enabling straightforward documentation in quality records. As a purpose-built gauge for metric ISO fine internal threads, it suits incoming inspection, in-process checks and final assembly controls where a standardised acceptance criterion is required. For complex specifications or application in specialised production contexts, the technical team can advise on complementary gauges or measurement strategies to integrate the inspection step with existing workflows. Contact Metav Werkzeuge for tailored advice on selecting the correct limit plug gauge and for assistance matching gauges to production requirements; Metav Werkzeuge provides fast, Europe-wide supply from Emmerich and technical support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.020.3 SKU: M315.020.3 GTIN: 4054469122625 Net weight: 0.2 kg Facts Thread size: M20 x 0.75 Thread form: metric ISO fine thread Standard: DIN 13, 6H Tariff number: 90173000 Special features Material: hardened gauge steel Handing: right-hand thread Precision-ground working surfaces Category: Gauges; Measuring pins FAQ What thread size and pitch does this gauge inspect? The limit plug gauge inspects M20 x 0.75 metric ISO fine internal threads and is specified for that size in the product identification. Does the gauge conform to any recognised standard? Yes, the tool is manufactured to the DIN 13 standard with a tolerance class of 6H for internal threads. Is the gauge suitable for routine production checks? The hardened construction and precision-ground profile make this thread gauge well suited for routine Go/No-Go checks in production and inspection environments. What material is the gauge made from and how durable is it? Made from hardened gauge steel, the instrument is designed for repeated engagement and maintains its profile for extended service life. How is the gauge identified for traceability? The item is supplied with a clear article and GTIN reference for inventory and quality record keeping (Article number M315.020.3). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20x1 Thread Go Ring Gauge For Metric ISO Fine Thread Right Hand, Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
Take advantage of the reliable combination of hardened gauge steel and conformity to DIN 13 (6g) for consistent thread inspection results; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M20 × 1 mm — hardened gauge steel, DIN 13 (6g) Thread ring gauge M20 × 1 mm for inspection of metric ISO fine external threads, suited to workshop and production use Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M20 × 1 mm metric fine thread Right-hand thread, workshop-ready Ensure compliant threads with a production-ready inspection tool A precision thread ring gauge in hardened gauge steel provides a reliable go/no-go reference for external threads on turned or forged parts. Built to DIN 13 with a 6g tolerance class, this gauge supports conformity checks that reduce unexpected rejects and rework in serial production. The specified metric pitch M20×1 matches ISO fine-thread profiles commonly used in hydraulic fittings, fastenings and precision assemblies, enabling rapid verification during quality control procedures. Robust design for repetitive shop-floor use The gauge’s hardened construction and compact mass make it resistant to wear while remaining easy to handle in routine inspections. The right-hand orientation suits standard thread directions and avoids ambiguity during pass/fail checks. Thanks to a low weight of approximately 0.12 kg, the check can be performed quickly without fatigue, improving throughput in multi-station inspection setups. The sturdy steel composition ensures long service life and stable reference characteristics under normal workshop conditions. Integrates into production control and traceability processes Intended for regular compliance testing, this M20×1 ring gauge fits inline inspection, workstation tooling sets and handheld spot checks. As a standardised control piece, it streamlines documentation and helps maintain process capability statistics for thread-producing operations. The gauge’s clear specification to DIN 13 (6g) and its GTIN enable straightforward inventory management and traceability throughout the supply chain, supporting quality records for audits and batch release. For reliable thread inspection and tailored advice on integrating this Metav IndustryLine gauge into production, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.220.4 GTIN: 4054469125961 Weight: 0.12 kg Facts Dimension: M20 × 1 mm Tariff code: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13, tolerance class 6g Right-hand thread Category: gauges / inspection tools FAQ What is this gauge used for? This thread ring gauge is used to verify external M20×1 metric ISO fine threads against the DIN 13 (6g) tolerance to ensure parts meet specification. How precise is the thread inspection? The gauge is manufactured to the DIN 13 standard with a 6g tolerance class, providing a clear go/no-go criterion for production control. Which materials can be checked with this gauge? The gauge checks thread form and size on parts made from common workshop materials; it is a measuring standard for the external thread profile rather than dependent on the workpiece material. Is the gauge suitable for production line use? Yes — the hardened construction and compact design make it appropriate for repetitive inspections on the shop floor and incorporation into quality routines. How should the gauge be stored and maintained? Keep the gauge clean, lightly oiled if stored for extended periods, and protected from impacts; periodic visual inspection ensures ongoing reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20x1.5 Go/No-Go Thread Plug Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Combine precise thread verification with durable construction and recognised tolerances to keep production checks fast and reliable; order the gauge directly via Metav Werkzeuge or consult our specialists for dimensioning and supply. Limit thread plug gauge M20 x 1.5 — right-hand limit plug gauge (Metav IndustryLine) The limit thread plug gauge M20 x 1.5 is a right-hand metric ISO fine-thread limit gauge for rapid pass/fail verification of internal threads in production and inspection environments. Limit thread plug gauge M20 x 1.5 Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6H Right-hand thread, precision checking Faster, more reliable thread conformity checks A dedicated limit thread plug gauge is the most direct method to confirm that an internal thread meets its dimensional envelope. The M20 x 1.5 size provides immediate go/no-go feedback, eliminating calculation steps and reducing inspection time at the control station. Because the gauge is made from hardened gauge steel, wear is minimised and results remain reproducible over prolonged use. Conformance with DIN 13 and the 6H tolerance class ensures that the assessment aligns with widely recognised standards, supporting consistent quality metrics across suppliers and production batches. Robust construction that reduces downtime The gauge's material and manufacturing focus on durability and repeatability: hardened gauge steel resists abrasion and maintains form even under frequent handling. At approximately 0.2 kg, the tool is compact and straightforward to use on the shop floor while offering the stiffness required for reliable checking. This construction reduces the rate of rework caused by undetected thread errors and lowers the long‑term cost of inspection through extended service life. Traceable identification and stable mechanical characteristics make it suitable for integration into routine quality audits. Practical integration into inspection workflows Designed for fast tactile verification, the gauge suits inline checks, receiving inspections and final acceptance procedures. Its right-hand metric ISO fine-thread design fits directly into threaded bores for a clear pass or fail result, simplifying operator decisions and improving throughput. When combined with Metav IndustryLine’s distribution and stock reliability, the gauge supports continuity of supply for both small workshops and larger production lines. For traceability, the SKU and product details enable straightforward inventory and quality‑record linkage in management systems. Contact Metav Werkzeuge for a tailored supply plan and specification guidance on the Metav IndustryLine limit thread plug gauge M20 x 1.5 (SKU M315.020.6) to ensure the right gauges are delivered to your production line from Emmerich. Technical Data Article number: M315.020.6 GTIN: 4054469122649 Manufacturer: Metav IndustryLine Facts Weight: 0.2 kg Customs tariff number: 90173000 eClass: 21170235 Special features Thread size: M20 x 1.5 Right-hand metric ISO fine thread Conforms to DIN 13, tolerance 6H Material: gauge steel, hardened FAQ What is the primary use of this gauge? The limit thread plug gauge M20 x 1.5 is used for immediate go/no‑go verification of internal metric ISO fine threads to confirm dimensional compliance during production and inspection. Which standard does the gauge comply with? This gauge is manufactured to match the requirements of DIN 13 and the 6H tolerance class, providing standardised assessment criteria for metric threads. How durable is the gauge for frequent shop‑floor checks? Constructed from hardened gauge steel, the Metav IndustryLine limit thread plug gauge offers high wear resistance and stable results under frequent use. Can the gauge be used in incoming inspection and final acceptance? Yes, the design is suitable for inline receiving checks and final acceptance tests where a simple pass/fail decision for M20 x 1.5 threads is required. How is the gauge identified for inventory and quality records? Identification is via the SKU M315.020.6 and GTIN 4054469122649, which supports traceability in quality and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20x1.5 Thread Ring Gauge ISO Metric Fine Right-Handed DIN 13, Hardened Gauge Steel 6g - Metav IndustryLine
High‑precision DIN 13 tolerance (6g) combined with hardened gauge steel yields reproducible thread checks; the compact 0.14 kg ring supports rapid handling and consistent pass/fail decisions. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M20 x 1.5 mm — Go ring, DIN 13 (6g) — Metav IndustryLine The Thread ring gauge M20 x 1.5 mm Go is a hardened ring gauge designed for inspection of metric ISO fine threads in accordance with DIN 13, tolerance class 6g, intended for right‑hand threads. Hardened gauge steel construction DIN 13 tolerance class 6g For M20 x 1.5 metric ISO fine threads Right‑hand Go ring for quick inspection Reliable pass/fail control to protect production quality A Go ring provides a straightforward, objective check: the thread is accepted if the ring engages cleanly. Built to DIN 13 with the 6g tolerance class, this ring gauge supports reproducible decisions during incoming inspection, in‑process checks and final quality control. Using a dedicated gauge rather than subjective thread trial reduces interpretation errors and speeds throughput, making statistical process control and traceability easier to maintain in serial production. Durable construction for long service life and low maintenance Manufactured from hardened gauge steel, the ring delivers dimensional stability and wear resistance under regular use. The modest mass of 0.14 kg improves handling for handheld inspection and reduces operator fatigue during repetitive checks. The robust material and hardened finish minimise distortion and abrasion, extending recalibration intervals and lowering life‑cycle costs compared with softer gauges or improvised checking tools. Simple integration into inspection routines and fixtures The ring is configured for M20 x 1.5 mm metric ISO fine threads and right‑hand use, so it fits directly into standard test benches, go/no‑go stations and manual inspection routines. As a fixed‑limit gauge, it complements measurement equipment and statistical systems by providing a binary, easily logged result. For buyers seeking consistent conformity checks, the ring aligns with established machining and fastening workflows and supports process reliability across serial production. Contact Metav Werkzeuge for application guidance or to procure this Metav IndustryLine M20 x 1.5 mm Go ring from our Emmerich stock Technical data Article number: M315.120.6 SKU: M315.120.6 GTIN: 4054469124315 Facts Size: M20 x 1.5 Weight: 0.14 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, 6g Type: Go ring for metric ISO fine thread, right‑hand FAQ What tolerance class does this gauge check against? The ring verifies threads to DIN 13 with tolerance class 6g, providing a clear go/no‑go criterion for acceptance. Is the ring suitable for metric fine threads? Yes, the thread ring gauge is manufactured specifically for M20 x 1.5 mm metric ISO fine threads and is a Go ring for right‑hand threads. What material and durability can be expected? Produced from hardened gauge steel, the gauge offers high wear resistance and dimensional stability; the item listed as M315.120.6 has a mass of 0.14 kg for easy handling. Can this ring be used for left‑hand threads? No; this ring is configured for right‑hand threads only. Left‑hand thread inspection requires the corresponding left‑hand gauge. How is the ring typically applied in production inspection? The Go ring is applied as a limit gauge in pass/fail checks—if the ring engages the thread without force, the thread passes; this method is quick to perform and straightforward to document. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20x1.5 Thread Ring Gauge Metric ISO Fine Right-Hand DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Taking advantage of DIN 13 (6g) conformity and hardened gauge steel, this ring gauge delivers repeatable verification of metric fine threads while its compact mass supports convenient handling on the shop floor. Order the gauge directly via Metav Werkzeuge or contact our consultants for specification support. Thread ring gauge M20 x 1.5 mm — Metric ISO fine thread verification, DIN 13 (6g), right-hand Thread ring gauge M20 x 1.5 mm is a hardened inspection gauge intended for direct verification of metric ISO fine right-hand threads in workshop and production quality control. Exact fit for M20 x 1.5 metric threads Hardened gauge steel construction Lightweight 0.12 kg for easy handling Consistent verification for metric fine threads The ring gauge is manufactured to DIN 13 with tolerance class 6g, ensuring a clearly defined acceptance limit for external metric fine threads. This compliance means the device functions as a reliable reference for pass/fail assessments and repeat inspections, reducing ambiguity in go/no-go checks. The size M20 x 1.5 is executed to the standard thread form so that dimensional conformity and flank geometry are represented faithfully during routine checks, supporting traceable quality processes. Durable construction that suits the workshop Made from hardened gauge steel, the component resists wear under frequent use and maintains its measuring profile over many inspection cycles. The compact mass of 0.12 kg and the ring format make handling straightforward at the workbench or beside a machine, while the hardened finish minimises deformation risk during everyday use. This robustness translates into lower maintenance intervals and predictable service life, which helps to keep production interruptions to a minimum. Practical integration into quality workflows The ring gauge is designed for direct use in incoming inspection, in-process checks and final control, providing clear, objective verification of threaded parts. As a tactile inspection tool, it complements measuring instruments and visual controls, offering a fast, unmistakable result when assessing threads produced to the metric ISO fine series. The product is supplied with the manufacturer’s identification (SKU: M315.220.6) for inventory and traceability within established quality-management systems. For procurement and specialist advice on Metav IndustryLine thread ring gauges, contact Metav Werkzeuge—our consultants in Emmerich can advise on suitability and supply options Technical data Article number: M315.220.6 GTIN: 4054469125978 Size: M20 x 1.5 Weight: 0.12 kg Facts Standard: DIN 13 Tolerance class: 6g Special features Material: hardened gauge steel Thread direction: right-hand Category: Thread ring gauge FAQ What standard and tolerance does this ring gauge follow? The ring gauge conforms to DIN 13 and is manufactured to tolerance class 6g, suitable for checking metric ISO fine threads in the specified size. Which materials and workshop conditions are supported by the gauge? Constructed from hardened gauge steel, the gauge withstands regular use on the shop floor and maintains its profile across routine inspections. For which thread size is the gauge intended? The device is produced for M20 x 1.5 metric ISO fine threads and is identified as SKU M315.220.6 for procurement and traceability. How is the gauge used in quality control? The ring gauge serves as a direct verification tool during incoming inspection, in-process checks and final control, offering a definitive physical check of thread form and conformity. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20x1mm Limit Thread Plug Gauge Metric ISO Fine Pitch Right Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The product data contain contradictory entries regarding the item's status, which prevents creation of a reliable product description. These inconsistencies make it challenging to ensure accuracy and clarity in the final output. Please verify and correct the dataset thoroughly before resubmitting, as this will allow for the production of a complete specification and technical text. Addressing these discrepancies is essential to avoid confusion and ensure the information provided is both precise and comprehensive. Once the dataset has been reviewed and amended, we will be able to proceed with generating a detailed and accurate product description.
M20x2 Thread Go Ring Gauge For Metric ISO Fine Thread Right-Handed Hardened Gauge DIN 13, 6g - Metav IndustryLine
Take advantage of precise, standardised inspection and a robust, hardened construction for reproducible thread checks in production. Benefit from conformity to DIN 13 with tolerance class 6g and a compact design that simplifies go/no‑go decisions—order the thread ring gauge directly via Metav Werkzeuge or consult our advisors for application support. Thread Ring Gauge M20×2 — DIN 13, 6g; hardened gauge steel (Metav IndustryLine) The Thread Ring Gauge M20×2 is a right‑hand, hardened ring gauge for rapid verification of metric ISO fine threads in production and inspection environments. Hardened gauge-steel construction Conforms to DIN 13, tolerance 6g For M20×2 metric ISO fine threads Right-hand thread checking Faster, standards‑based pass/fail inspection on the shop floor The thread ring gauge provides a straightforward, standards‑based method for verifying internal thread geometry. Conformance to DIN 13 with tolerance class 6g guarantees that the gauge evaluates the essential go/no‑go criteria used across European machine and component manufacturing. As a result, inspectors and production staff obtain a clear pass/fail decision at the point of manufacture, reducing downstream rework. The gauge’s specification for M20×2 (metric ISO fine thread) matches common fine‑pitch applications in assemblies and fittings, enabling rapid sampling and consistent acceptance thresholds. Robust material and geometry for repeatable measurements Manufactured from hardened gauge steel, the ring gauge resists wear and maintains form accuracy under frequent use. The hardened material and careful heat treatment ensure dimensional stability and long service life, which translates into fewer replacements and lower lifecycle cost for the inspection toolset. The compact mass of 0.18 kg makes handling and daily use uncomplicated while preserving the stiffness required for reproducible engagement. The right‑hand orientation and precise internal profile allow the gauge to be used directly at the machine, in incoming inspection or as a go/no‑go reference in assembly. Simple integration into quality workflows and traceability This ring gauge is designed for easy incorporation into existing quality routines: it supports quick machine‑side checks, batch sampling and shop‑floor audits without additional measurement equipment. Clear identification via the SKU and GTIN simplifies inventory control and traceability in production records; the compact design also reduces the time needed for operator training. For component suppliers and contract manufacturers the gauge provides a pragmatic and durable solution for routine thread verification, improving throughput while preserving measurement confidence. Contact Metav Werkzeuge for a tailored specification check or a procurement recommendation for the Metav IndustryLine thread ring gauge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.120.7 GTIN: 4054469124322 Material: hardened gauge steel Standard: DIN 13, 6g Thread size: M20×2 Facts Nominal size: M20 Pitch: 2 mm Weight: 0.18 kg Tariff number: 90173000 Special features Right-hand internal thread gauge For metric ISO fine threads Robust, wear-resistant construction Category: Gauges / Lehren FAQ What is the intended use of this gauge? The Thread Ring Gauge M20×2 is intended for go/no‑go verification of internal M20×2 metric ISO fine threads in production and inspection. Which tolerance class does the gauge check to? The gauge conforms to DIN 13, checking threads to tolerance class 6g as the acceptance criterion. What material is the gauge made from? The ring gauge is manufactured from hardened gauge steel, chosen for wear resistance and dimensional stability. Can this gauge be used at the machine for routine checks? Yes. Its compact design and robust construction make the gauge suitable for machine‑side sampling and shop‑floor quality checks. How is the product identified for ordering and traceability? Identification for procurement and traceability is available via article number M315.120.7 and GTIN 4054469124322. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20x2.5 Limit Thread Plug Gauge Metric ISO Regular Thread Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of precise thread verification, robust hardened gauge steel construction and the standardised tolerance reference to keep assembly processes reliable; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit thread plug gauge M20 x 2.5 mm — Metric ISO right-hand, hardened gauge steel (Metav IndustryLine) The Limit thread plug gauge M20 x 2.5 mm is a compact control gauge for verifying metric ISO right-hand threads to DIN 13, tolerance 6H, suitable for workshop and production checks For M20 x 2.5 metric ISO threads Tolerance class DIN 13, 6H Hardened gauge steel construction Compact mass 0.27 kg for easy handling Ensure consistent assembly quality with fast, repeatable checks A dedicated limit thread gauge shortens inspection time and reduces uncertainty on the shop floor. Made from hardened gauge steel, the gauge resists wear and preserves dimensional fidelity across many cycles, which translates into fewer production stoppages and less rework. The reference to DIN 13, 6H provides a recognised standard for thread form and tolerance, meaning results are directly comparable with specification sheets and inspection routines. Using a purpose-built gauge supports quicker decision-making in quality control and keeps throughput predictable. Minimise rejects with a precise, standardised control tool The right-hand metric specification M20 x 2.5 mm aligns with common engineering threads, enabling immediate verification during assembly and after machining. A simple go/no‑go assessment with this type of gauge confirms whether the thread meets the required limits without the need for complex measurement setups, saving labour time and lowering the risk of accepting out-of-tolerance parts. The compact design and modest mass make the tool easy to handle at test stations, helping inspectors remain efficient during repetitive checks. Durable construction for reliable long‑term performance Hardened gauge steel ensures dimensional stability and resistance to surface damage under routine use; this durability reduces the frequency of replacement and contributes to predictable inspection intervals. The compact form factor and low mass make the gauge practical for mobile inspection tasks or tight workstations. Where traceability of inspection tools is required, the clear reference to DIN 13 provides a solid basis for inclusion in internal quality records and audit trails. Practical benefit for production and quality teams Integrating a dedicated limit thread gauge into incoming inspection and final checks streamlines quality assurance workflows and strengthens supplier inspection chains. The gauge supports rapid conformity checks that are easy to train staff on, helping standardise accept/reject criteria across shifts. For manufacturers and maintenance teams, the gauge is a pragmatic, low-effort means to protect assembly integrity and reduce warranty risks through consistent thread verification. Choose the Metav IndustryLine limit thread plug gauge for dependable thread inspection and contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich Technical data Article number: M315.020 GTIN: 4054469122601 Type: Limit thread plug gauge Size: M20 x 2.5 mm Norm: DIN 13, 6H Facts Mass: 0.27 kg Tariff number: 90173000 ECLASS: 21170235 Special features Material: hardened gauge steel Right-hand metric ISO thread Compact design for workshop use Category: gauges / inspection tools FAQ What does the gauge check and which thread standard does it reference? The gauge checks conformity of metric ISO right-hand threads and references DIN 13, 6H to determine acceptable limits for the thread form. Is this a go/no‑go tool or a measuring instrument? This is a limit thread plug gauge designed for go/no‑go verification rather than dimensional measurement; it confirms whether a thread falls within the specified limits. What material is the gauge made from and why does that matter? The gauge is manufactured from hardened gauge steel, providing wear resistance and dimensional stability for long service life under repeated inspection cycles. Which product code identifies this gauge? The item is listed as M315.020 (SKU M315.020) and marketed under the Metav IndustryLine range for gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20×0.75mm Thread Go Ring Gauge Three-Point ISO Fine Thread Right-Hand DIN 13, 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 tolerance (6g) and hardened gauge steel for reliable thread acceptance checks; order via Metav Werkzeuge or request consultancy for specification matching. Thread ring gauge M20 x 0.75 (DIN 13, 6g) — Metav IndustryLine The Thread ring gauge M20 x 0.75 is a hardened inspection ring designed for rapid verification of metric ISO fine external threads in production and quality control. *Thread ring gauge M20 x 0.75, right-hand *Hardened gauge steel construction *Manufactured to DIN 13 tolerance 6g *Compact weight 0.12 kg for handling Consistent pass/fail decisions with standard-compliant tolerances A gauge produced to DIN 13 with 6g tolerance gives a clear, objective criterion for thread acceptance that integrates seamlessly into shop-floor control routines. By providing a fixed reference for the external thread profile, the ring eliminates subjective judgements during visual or tactile inspection and speeds up quality control throughput. The hardened measuring surface preserves dimensional integrity over repeated use, ensuring that each check reflects the original inspection limit rather than wear-induced deviation. This reliability reduces scrap and rework rates, helping to keep production run times predictable. Durable construction that lowers maintenance needs Constructed from hardened gauge steel, the ring is engineered for longevity in industrial environments. The material choice minimises wear on the measuring faces and maintains form stability under normal handling. At a weight of 0.12 kg the component is easy to position and rotate by hand, which streamlines repetitive checks without the fatigue associated with heavier gauges. Reduced maintenance and longer service intervals translate into lower total cost of ownership and fewer interruptions to inspection plans. Clear application guidance for workshop compatibility The ring is intended for inspection of external, metric ISO fine threads with a thread pitch of 0.75 mm, right-hand orientation. In practice, this means quick verification of turned or machined components such as shafts, fittings and precision fasteners. For shops that adhere to DIN norms, this gauge provides direct compliance evidence for incoming inspection and in-process checks. For teams less familiar with tolerance classes, 6g denotes the standard tolerance zone for external threads, compatible with most mating internal thread classes used in mechanical assemblies. Trust and supply security from a dedicated metrology partner Sourcing from Metav IndustryLine offers the logistical and technical backing expected in industrial procurement: consistent stockkeeping from Emmerich, a wide catalogue of metrology items, and experienced advice for matching gauges to measurement tasks. Choosing a standardised inspection tool supports traceable, repeatable testing routines and contributes to documented quality assurance processes. For complex assemblies where thread conformity is critical, a robust ring gauge forms a simple but effective control point that protects component fit and function. Select Metav IndustryLine gauges for standards-based, durable inspection — contact Metav Werkzeuge in Emmerich for procurement advice and specification support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.220.3 GTIN: 4054469125954 Manufacturer brand: Metav IndustryLine Category: Lehren Facts Thread size: M20 x 0.75 mm Weight: 0.12 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, 6g Right-hand external thread inspection Intended for metric ISO fine threads FAQ What does this gauge check? The ring checks external metric ISO fine threads; the Thread ring gauge M20 x 0.75 confirms whether a part meets the specified thread form and tolerance band. Is the gauge suitable for production use on turned parts? Yes, the Metav IndustryLine ring is designed for shop-floor inspections of turned and machined external threads where fast, repeatable acceptance checks are required. What does the 6g tolerance indicate? The 6g designation refers to the external thread tolerance class per DIN 13 and specifies the acceptable size band for mating with standard internal threads. Can the gauge be used for both fine and coarse thread series? This specific item is for a fine thread pitch of 0.75 mm; different ring gauges are required for other pitches or coarse thread series. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20×1 Thread Gauge Ring Go, ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Combine precise Go/No-Go verification with a hardened gauge steel construction and strict DIN 13 conformity to ensure reliable thread inspection in production and workshop environments. Order the Thread Gauge Ring M20 x 1 mm (Go) directly via Metav Werkzeuge or ask our consultants if needed. Thread Gauge Ring M20 x 1 mm (Go) – Metric ISO Fine Thread, DIN 13, Metav IndustryLine Thread Gauge Ring M20 x 1 mm (Go) is a compact inspection gauge for assessing the conformity of metric ISO fine internal threads in routine quality control and incoming inspection. Hardened gauge steel for stable accuracy For metric ISO fine thread M20 x 1 Manufactured to DIN 13, tolerance 6g Consistent acceptance testing for threaded components A dedicated Go thread gauge delivers a fast, unambiguous check of internal thread geometry. Designed for repeatable pass/fail inspection, the ring provides a direct confirmation that an M20 x 1 internal thread meets the specified DIN 13 profile and 6g tolerance band. The simple Go/No-Go concept reduces decision time on the shop floor and supports higher throughput without compromising inspection integrity. Robust construction that minimises measurement uncertainty Made from hardened gauge steel, the ring resists wear and maintains form stability under frequent use. The material choice and the compact design combine to limit elastic deformation, which keeps the acceptance condition reliable across many cycles. For production areas where mechanical handling and repeated seating are routine, this construction reduces the need for frequent replacement and helps sustain consistent quality control. Practical application and workshop compatibility The gauge is intended for direct verification of metric ISO fine internal threads and is suited to both production control and incoming goods inspection. Its compact footprint and intuitive function allow quick integration into standard quality routines; the ring is especially helpful where rapid go/no-go decisions are required. Use of the ring complements visual inspection and thread measurement instruments, offering an efficient stop-gap that flags non-conforming parts before further processing. Standards, traceability and workshop benefits Conformance to DIN 13 ensures the gauge corresponds with established thread form and tolerance classes, which simplifies documentation and acceptance criteria. Lightweight and easy to handle, the ring supports ergonomic inspection workflows while contributing to reproducible checks across shifts. The Metav IndustryLine designation signals a consistent supply chain and a pragmatic focus on industrial usability and workshop readiness. For tailored advice on implementing this Metav IndustryLine thread gauge in production workflows, contact Metav Werkzeuge for application guidance and delivery options via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: M315.120.4 GTIN: 4054469124308 Brand: Metav IndustryLine Facts Thread size: M20 x 1 Weight: 0.14 kg Tariff code: 90173000 Special features Go (accept) thread gauge ring For metric ISO fine threads, right-hand Material: hardened gauge steel Standard: DIN 13, tolerance 6g FAQ What is the primary purpose of this ring gauge? The ring gauge is used to perform a quick Go acceptance check of internal M20 x 1 metric ISO fine threads to confirm conformity with DIN 13 and the 6g tolerance. Can this gauge be used in production and incoming inspection? Yes, the Metav IndustryLine Go ring is suitable for both production control and incoming goods inspection as a fast, reliable pass/fail device. How does the material affect longevity? The hardened gauge steel construction increases wear resistance and dimensional stability, extending the service life under frequent use. Does the ring gauge indicate tolerance class? The ring is manufactured to match the DIN 13 profile with a 6g tolerance; therefore it verifies whether the thread meets that specific tolerance class. Is the product traceable by article number? Yes, the ring can be referenced by Article number M315.120.4 and GTIN 4054469124308 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20×2 Limit Plug Gauge Metric ISO Fine Thread Right Hand Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Combining the DIN 13, 6H tolerance specification with hardened gauge steel yields dependable go/no-go decisions for threaded parts; the compact M20 x 2 mm limit plug gauge supports fast inspection cycles and reduces rework. Order the limit thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug gauge M20 x 2 mm — metric ISO fine thread, right-hand (Metav IndustryLine) A limit thread plug gauge M20 x 2 mm designed for quick acceptance testing of metric ISO fine threads in production and inspection environments Limit plug gauge M20 x 2 mm metric ISO Hardened gauge steel for long service life Tolerance DIN 13, 6H for consistent thread fit Compact 0.3 kg mass for easy handling Ensure correct thread fit on the first check The primary function of this limit plug gauge is to provide an immediate, unambiguous verdict on thread conformity. Manufactured to DIN 13, 6H, the gauge confirms whether internal threads meet the specified tolerance band for an M20×2 metric fine thread, helping to identify out-of-tolerance parts before assembly. Using a hardened limit gauge avoids subjective measurement judgements: the part either accepts the gauge or it does not, which simplifies process control and lowers the risk of faulty assemblies and expensive rework. Built for repeatability and workshop use Constructed from hardened gauge steel, the tool resists wear and maintains dimensional stability across repeated cycles, which is essential for routine quality checks. With a mass of 0.3 kg, the gauge is compact and easy to handle on the shop floor while still offering the stiffness required for reproducible results. The right-hand thread form and fine-pitch profile match common production specifications for fine-threaded fastenings, ensuring compatibility with typical machine parts and fixtures. Integrates into production control with clear traceability The limit gauge supports efficient inspection sequences and traceable inventory management; references such as SKU M315.020.7 and GTIN 4054469122656 facilitate documentation and part tracking within a quality-management system. As a dedicated metric ISO thread verifier, it complements dimensional checks and reduces inspection time compared with full gauging setups. Suppliers and inspectors benefit from the simple pass/fail logic, which accelerates decision-making and maintains throughput on busy production lines. Request the Metav IndustryLine M20 x 2 limit plug gauge via Metav Werkzeuge for standardised thread inspection and practical integration into production control Technical Data Article number: M315.020.7 GTIN: 4054469122656 Mass: 0.3 kg Material: Hardened gauge steel Standard: DIN 13, 6H Numbers / Core technical data Thread size: M20 x 2 mm Right-hand thread Tariff code: 90173000 eClass: 21170235 Special features / Versions Limit plug gauge design for metric ISO fine thread Compact format for workshop handling Suitable for acceptance testing and routine inspection Category: Gauges / Thread gauges (Lehren) FAQ What thread size does this gauge check? The limit thread plug gauge checks an M20 x 2 mm metric ISO fine thread. Is the gauge suitable for production inspection routines? Yes, the M20 x 2 limit plug gauge from Metav IndustryLine is designed for rapid pass/fail checks within production and inspection workflows. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel; this material retains dimensional stability and resists wear, ensuring reliable results over many inspection cycles. Which standard governs the tolerance of the gauge? The tool is manufactured to DIN 13 with a 6H tolerance class, matching common acceptance criteria for metric ISO threads. How can the gauge be referenced in documentation? Use SKU M315.020.7 and GTIN 4054469122656 for traceability in quality records and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20×2 Thread Go/No-Go Ring Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of a compact, standards‑compliant inspection tool that combines fast pass/fail checks with durable construction; the hardened gauge steel and DIN 13 tolerance class provide reproducible results and reduced rework. Order the thread gauge directly via Metav Werkzeuge or request advice from our technical consultants for integration into production inspection routines. Thread ring gauge M20 × 2 mm (No‑Go) — Metav IndustryLine A Thread ring gauge M20 × 2 mm (No‑Go) for rapid verification of metric ISO fine threads to DIN 13, designed for on‑line and workshop quality control of right‑hand external threads No‑go ring for M20×2 threads Hardened gauge steel construction Manufactured to DIN 13, tolerance 6g Rapid, unambiguous thread inspection for production A no‑go ring provides a binary, immediately interpretable result: if the external thread enters the ring, the part is out of tolerance. This Thread ring gauge M20 × 2 mm (No‑Go) is specified for M20×2 metric ISO fine threads and conforms to DIN 13 with tolerance 6g, making it suitable for routine shop‑floor checks and first‑piece inspections. The simple pass/fail principle reduces measurement time compared with dimensional gauging, enabling a steady flow through inspection points and helping to prevent batches of non‑conforming parts from progressing further down the line. Where traceable evidence of conformity is required, the clear go/no‑go outcome simplifies documentation and decision making. Durable, low‑maintenance construction for high throughput Manufactured from hardened gauge steel, the ring resists wear and retains form tolerance over extended production runs. The compact mass of 0.12 kg and the robust finish make the gauge easy to handle while remaining stable during repetitive use. Because the gauge is built for repeated engagement with threaded parts, downtime for replacement is minimised and consistency across inspectors is improved. The mechanical simplicity also reduces the need for frequent recalibration compared with more complex measuring instruments, supporting continuous inspection in busy manufacturing environments. Integrates with existing quality workflows and supplier control Used as part of a layered inspection concept — alongside functional tests and sampling measurements — this no‑go ring supports rapid decisions at the machine, assembly bench or goods‑in inspection. The ring’s compliance with DIN 13 / 6g aligns it with standard engineering practice, aiding supplier audits and incoming goods checks. Supplied by Metav IndustryLine, the gauge benefits from Metav’s European quality filter and distribution infrastructure, which helps small and medium manufacturers access precision measuring tools reliably and repeatedly. For reliable thread control on the shop floor, request technical details or a supply proposal from Metav Werkzeuge to ensure seamless integration with current inspection processes Technical data Article number: M315.220.7 GTIN: 4054469125985 Weight: 0.12 kg Material: gauge steel, hardened Thread size: M20 × 2 mm (right‑hand) Standard: DIN 13, tolerance 6g Facts Thread pitch: 2 mm Tariff code: 90173000 ECLASS: 21170214 Special features No‑go (reject) ring for metric ISO fine thread inspection Category: Gauges / Measuring instruments Suitable for production and incoming inspection FAQ What is the purpose of a no‑go thread ring gauge? A no‑go thread ring gauge is a functional check: if an external thread enters the ring, the part is rejected. The gauge provides a fast, unambiguous pass/fail decision during inspections. Can this gauge be used for both coarse and fine threads? This specific gauge is for M20 × 2 mm metric ISO fine threads (right‑hand) and is not suitable for coarse thread pitches; separate gauges are required for different thread sizes or pitches. How does the gauge relate to standards and tolerances? The ring is manufactured to DIN 13 with tolerance class 6g, ensuring compatibility with standard ISO metric thread production and allowing consistent acceptance criteria in quality control. How often should the ring be checked for wear? Frequency depends on usage intensity; for high throughput lines a regular inspection schedule is recommended. Visual checks and functional trials against calibrated masters help determine wear before dimensional drift affects results. Is this gauge suitable for supplier incoming inspection? Yes. The no‑go ring’s clear pass/fail output and DIN 13 / 6g conformity make it well suited to incoming goods inspection and fast supplier verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M20×2.5 Thread Gauge Go, DIN 13 6g, Hardened Gauge Steel, Right-Hand - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction and DIN‑compliant tolerance for fast, repeatable pass/fail inspection; order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for batch requirements and traceability options. Thread ring gauge M20 x 2.5 — Go gauge, Metav IndustryLine, DIN 13 (6g) The thread ring gauge M20 x 2.5 is a hardened Go ring for right‑hand metric ISO threads, intended for swift acceptance testing and inline production checks in workshop and serial production environments Hardened gauge steel construction DIN 13 tolerance 6g conformity Right‑hand metric ISO thread check Compact 0.2 kg workshop gauge Fast, reliable pass/fail inspection for production Designed for direct use at the machine or inspection station, this Go gauge enables immediate verification of external threads against the M20 x 2.5 metric ISO profile. By limiting the check to a single, go/no‑go action the gauge reduces decision time on the shop floor and eliminates subjective interpretation of measurements. The DIN 13 specification and 6g tolerance mean that acceptance criteria align with international standards, which supports consistent quality control and reduces rework rates across production batches. Robust construction that endures repeated checks Manufactured from hardened gauge steel, the ring gauge withstands frequent engagement without rapid wear, ensuring a long service life even under continuous use. The material choice and heat treatment provide dimensional stability and abrasion resistance, which keeps the gauge within tolerance over many cycles and lowers replacement frequency. The compact mass (0.2 kg) makes handling and storage straightforward while the solid construction delivers reproducible results when used in routine quality inspections. Practical benefits for workshop and quality teams As a dedicated acceptance tool, the ring removes ambiguity from thread verification: parts either pass the Go test or require further assessment. This clarity speeds throughput and simplifies operator training, because the gauge performs the complex geometry check mechanically. The right‑hand metric configuration matches the most common ISO thread forms in mechanical engineering, making the instrument suitable for workshops, assembly lines and incoming goods inspection where repeatable, standardised checks are required. For dependable thread acceptance and production control, request the Metav IndustryLine M20 x 2.5 Go ring gauge from Metav Werkzeuge — contact our Emmerich team at info@metav-werkzeuge.com or +49 2822 7131930 for technical advice and volume supply Technical data Article number: M315.120 GTIN: 4054469124278 Weight: 0.2 kg Label: Gewinde-Lehrring M20 x 2,5 mm gut DIN 13, f. metr. ISO-Regelgewinde, rechts Facts Thread size: M20 x 2.5 Tolerance: 6g (DIN 13) Tariff code: 90173000 Special features Material: hardened gauge steel Type: Go ring gauge for external threads Thread direction: right‑hand metric ISO regular thread Use: pass/fail inspection in production and QC FAQ What is the primary purpose of this ring gauge? The thread ring gauge M20 x 2.5 (Metav IndustryLine, SKU M315.120) is designed for pass/fail verification of external metric ISO threads, providing a quick mechanical check against the specified profile and tolerance. Does the gauge conform to recognised standards? Yes, the ring gauge is manufactured to DIN 13 with a 6g tolerance, ensuring compatibility with standard metric ISO thread specifications used in engineering and manufacturing. Which materials or components is the gauge intended to check? The gauge checks external threads produced in common engineering materials; it verifies the geometric form of the thread rather than material properties, so its function is independent of the workpiece material. How should the gauge be used to ensure repeatable results? Use the Go ring gauge for a simple insertion test: a free and full engagement indicates acceptance within the specified tolerance. Regular visual inspection for wear and appropriate storage will preserve repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com