Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M17x1 Limit Plug Gauge Three-Point Go Thread, DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a standards‑compliant limit plug gauge that combines DIN 13 6H conformity, hardened gauge steel construction and compact handling for efficient in‑process thread inspection. Order the gauge directly via Metav Werkzeuge or consult the Metav team for application advice and fast delivery. Grenzgewinde‑Lehrdorn M17 x 1 mm — Go/No‑Go plug gauge, right‑hand, DIN 13 6H (Metav IndustryLine) Grenzgewinde‑Lehrdorn M17 x 1 mm provides a clear pass/fail check for internal metric ISO fine threads and is intended for routine quality control in production and inspection. Go/no‑go plug gauge for M17×1 Right‑hand, metric ISO fine thread Hardened gauge steel construction Tolerance to DIN 13, 6H Ensure conformity without interpretation A dedicated go/no‑go plug gauge simplifies thread acceptance decisions by offering unambiguous results: the go end verifies correct minor diameter and pitch engagement, the no‑go end detects oversize or out‑of‑tolerance threads. Built to DIN 13 with a 6H tolerance class, the gauge supports documented inspection routines and reduces dependence on subjective measurements. For batch checks and first‑article inspections, this format accelerates throughput while maintaining traceable inspection criteria. Robust construction for repeatable inspections Manufactured from hardened gauge steel, the instrument resists wear during routine use and preserves the reference profiles over many cycles. The material choice and heat treatment ensure dimensional stability and long service life, reducing recalibration frequency and replacement costs. The compact mass of 0.15 kg supports single‑handed handling and quick engagement with threaded bores, which aids efficiency on shop floors where fast cycle times and low ergonomics load are required. Practical for workshop and production environments Designed as a right‑hand, metric ISO fine‑pitch plug, the limit gauge is suitable for inline checks on components with M17 x 1 mm internal threads. Its straightforward binary outcome eliminates interpretation delays from visual or tactile assessments, thereby lowering the risk of non‑conforming parts proceeding through assembly. The gauge’s compatibility with common inspection jigs and fixtures makes it a practical addition to both workshop benches and final inspection stations, improving quality assurance workflows and operator confidence. Select the Metav IndustryLine M17 × 1 go/no‑go plug gauge for reliable, standards‑based thread control — contact Metav Werkzeuge for detailed application guidance and prompt supply from Emmerich Technical data Article number: M315.017.4 GTIN: 4054469122533 Manufacturer: Metav IndustryLine Facts Thread size: M17 x 1 mm Weight: 0.15 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, 6H Right‑hand metric ISO fine thread Category: plug gauge / limit gauge Intended use: pass/fail inspection of internal threads Packaging: single item (no wooden or plastic case specified) FAQ What does the go/no‑go arrangement check on this plug gauge? The plug gauge performs a binary check: the go end confirms correct thread form and engagement for the specified M17 x 1 mm metric ISO fine thread, while the no‑go end identifies threads that exceed tolerance limits. Which standard does this gauge conform to? This limit gauge is manufactured to DIN 13 with a 6H tolerance class, providing compatibility with standard metric ISO internal thread specifications. Is the gauge suitable for production use on the shop floor? Yes; the hardened gauge steel construction and compact design make the gauge well suited to routine in‑process and final inspection tasks in production environments. How is the gauge identified for ordering and traceability? Order and record the item using the article number M315.017.4 and GTIN 4054469122533 to ensure correct procurement and traceability. Can this gauge be used for left‑hand threads? No; this specific gauge is produced for right‑hand metric ISO fine threads and is not suitable for left‑hand threaded components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M17x1 Thread Go Ring Gauge ISO Fine Thread Right-Hand Hardened Gauge, DIN 13 6g - Metav IndustryLine
Take advantage of fast conformity checks, robust hardened gauge steel construction and the standardised tolerance class for consistent batch validation; order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M17 x 1 mm (M315.217.4) – DIN 13, 6g, hardened gauge steel · Metav IndustryLine The Thread ring gauge M17 x 1 mm (M315.217.4) is a hardened inspection ring for checking metric ISO fine threads to DIN 13 in production and quality control, designed for repeatable acceptance testing of right‑hand threads. DIN 13 tolerance class 6g Hardened gauge steel construction Right-hand metric ISO fine thread Compact weight 0.13 kg for easy handling Consistent conformity for metric fine threads The ring is manufactured for repeatable acceptance testing of metric ISO fine threads and complies with DIN 13 tolerancing rules. Thanks to the 6g tolerance class, this tool supports reliable go/no‑go decisions in standard workshop and production environments. The item is suited to routine thread checks where documented conformity speeds assembly release and reduces scrap rates, thereby supporting efficient quality processes. Robust materials and handling benefits in daily use Made from hardened gauge steel, the gauge offers high wear resistance and dimensional stability during regular use. The compact mass of 0.13 kg and its straightforward geometry make handling and location in inspection routines simple, while the right‑hand thread form mirrors common fastening practices. The solid construction minimises measurement drift and extends service intervals, reducing downtime in inspection workflows. Integration into inspection routines and documentation The device is ready for immediate integration into workshop inspection benches and inline checks. Marked data such as the SKU (M315.217.4) and GTIN enable traceable inventory and procurement, while the clear specification of thread size and tolerance class simplifies checklist creation. Using standardised gauges like this one shortens decision cycles during sampling and supports a predictable production flow with fewer assembly rejects. Purchase the Metav IndustryLine ring gauge through Metav Werkzeuge for reliable thread validation and expert procurement support Technical Data Article number: M315.217.4 GTIN: 4054469125862 Weight: 0.13 kg Size: M17 x 1 Facts Standard: DIN 13 Tolerance class: 6g Commodity code: 90173000 ECLASS: 21170214 Special features Material: hardened gauge steel Thread direction: right-hand Application: metric ISO fine threads Category: ring gauge / inspection gauge FAQ What thread size does this ring gauge check? The ring gauge checks an M17 x 1 mm metric fine thread as specified on the ring gauge (M315.217.4) and is intended for right‑hand ISO thread forms. Which tolerance class does the gauge represent? This Metav IndustryLine ring gauge is made to 6g tolerance as per DIN 13, suitable for standard conformity checks in machining and assembly control. Is the gauge suitable for production sampling? Yes, the hardened construction and standardised dimensions make it suitable for routine sampling and go/no‑go acceptance testing on production lines. How does the gauge help reduce assembly rejects? By providing a reliable go/no‑go reference for thread form and tolerance, the gauge reduces uncertainty during inspection and helps prevent incorrectly threaded parts from entering assembly. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M17x1.5 Limit Thread Plug Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H Hardened Gauge Steel - Metav IndustryLine
Hardened gauge steel, DIN 13 tolerance class 6H and precise M17 x 1.5 mm thread control combine to speed up inspection decisions and reduce rework; order directly via Metav Werkzeuge or contact our consultants for application advice. Limit thread plug gauge M17 x 1.5 mm — ISO metric fine thread, right-hand (Metav IndustryLine) The limit thread plug gauge M17 x 1.5 mm is a hardened inspection gauge for rapid verification of ISO metric fine internal threads in production and incoming‑goods inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H M17 x 1.5 mm ISO fine thread Right‑hand thread configuration Faster decisions in production control A dedicated limit thread plug gauge is designed to provide immediate, unequivocal acceptance information at the point of inspection. With a clearly defined pass/fail boundary based on the DIN 13 tolerance system, the gauge reduces subjective assessment and shortens cycle times. The direct result is fewer hold‑ups on the production line and faster release of compliant components, delivering measurable efficiency gains for workshop and quality teams. Accuracy anchored in recognised standards Built to the DIN 13, 6H specification, the gauge offers a reliable reference for distinguishing acceptable from non‑conforming internal threads. The standardised tolerance class ensures compatibility with typical metric manufacturing practices, so dimensional conformity is evaluated against an industry‑accepted benchmark. This standard conformity supports traceability in quality records and helps maintain supplier and customer confidence during audits. Durable construction for repeatable checks Manufactured from hardened gauge steel, the plug gauge resists wear and preserves measurement integrity over many cycles. The robust material and heat treatment provide high surface hardness, which minimises dimension drift under regular use and reduces the need for frequent replacement. This durability translates into lower total cost of ownership and consistent inspection results across batches. Simple integration into inspection workflows The compact form and right‑hand thread orientation make the gauge straightforward to handle in bench or on‑machine checks. Its clear specification — M17 x 1.5 mm ISO fine thread — simplifies tool selection and storage. For plants that document inspection outcomes, the gauge can be incorporated into sampling plans and routine quality checks without additional setup or training, supporting seamless adoption into existing procedures. Contact Metav Werkzeuge for precise application advice and secure the M17 x 1.5 mm limit thread plug gauge from Metav IndustryLine — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.017.6 GTIN: 4054469122540 Manufacturer: Metav IndustryLine Numeric data Thread size: M17 × 1.5 mm Weight: 0.15 kg Tariff number: 90173000 Tolerance class: 6H Features and materials Material: hardened gauge steel Standard: DIN 13 Thread form: ISO metric fine thread Orientation: right‑hand Categories: Gauges, Inspection tools FAQ What is the primary function of this gauge? The M17 x 1.5 mm limit thread plug gauge (Metav IndustryLine, SKU M315.017.6) verifies whether internal ISO metric fine threads meet the acceptance limits defined by DIN 13, providing a simple pass/fail check. Which standard and tolerance does the gauge follow? This plug gauge is manufactured to DIN 13 with tolerance class 6H, ensuring evaluations align with common metric thread specifications used in machining and assembly. What material is used and why does it matter? The gauge is made from hardened gauge steel, which maintains dimensional stability and resists wear, ensuring repeatable inspection results and extended service life. Is the gauge suitable for routine production use? Yes. The robust construction and standardised thread form make this gauge suitable for regular in‑process and incoming‑goods checks in manufacturing and inspection environments. How does the right‑hand configuration affect use? The right‑hand thread orientation matches the typical direction of most internal threads, allowing straightforward application without additional adaptation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M17x1.5 Thread Go Ring, Right-Hand, Hardened Gauge Steel, DIN 13 6g — Metav IndustryLine
Take advantage of precise thread inspection backed by hardened construction and DIN‑rated tolerance — ideal where repeatable acceptance of M17 x 1.5 mm metric fine threads is required. Benefit from robust material selection and traceable identification for consistent production control. Order the thread ring gauge directly via Metav Werkzeuge or consult a product specialist for application advice. Thread gauge ring M17 x 1.5 mm — Metric ISO fine thread inspection ring (Metav IndustryLine) The Thread gauge ring M17 x 1.5 mm is a compact inspection ring designed to verify metric ISO fine threads in production and quality control environments; suited for right‑hand thread checks and standardised to DIN specifications. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M17 x 1.5 mm metric fine threads Right-hand thread inspection ring Reliable acceptance testing for threaded components The inspection ring delivers a clear, reproducible criterion for thread acceptance based on DIN 13 with tolerance class 6g. Manufactured from hardened gauge steel, the control ring resists wear under repeated use, which reduces uncertainty in pass/fail decisions and lengthens service intervals. This creates measurable efficiency gains on the shop floor because inspection times are shortened and rework caused by ambiguous thread checks is minimised. Practical benefits in shop-floor quality control As a dedicated thread gauge, the ring supports rapid inline checks during assembly and incoming inspection. Its compact geometry keeps handling straightforward and allows fast visual or tactile verification without complex fixturing. The design focus on controlled dimensions means traceable checks for fine‑pitch threads, improving throughput when multiple threaded parts must be validated within a production run. Material selection and longevity explained Made from hardened gauge steel, the ring balances toughness and dimensional stability; the heat treatment reduces the rate of profile degradation, ensuring that the inspection limit remains consistent over time. With a modest mass and a robust finish, maintenance is limited to routine cleanliness and storage in a protective box or drawer to preserve the reference surface and prolong service life. Integration into inspection routines and inventory The ring is identified by the internal article number M315.217.6 and GTIN for inventory control, supporting traceability across batches and audits. Incorporating such a standardised control element into documented inspection plans simplifies compliance with internal quality policies and facilitates communication between production, inspection and purchasing functions. For fast procurement and technical clarification on Metav IndustryLine thread gauges, contact Metav Werkzeuge for ordering and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.217.6 GTIN: 4054469125879 Manufacturer: Metav IndustryLine Facts Thread size: M17 x 1.5 mm Tolerance class: 6g (DIN 13) Weight: 0.13 kg Tariff number: 90173000 Special features Material: Gauge steel, hardened Application: Metric ISO fine threads, right‑hand Category: Gauge ring (inspection tool) FAQ What is the intended use of this ring gauge? The ring gauge is intended for inspection of metric ISO fine threads M17 x 1.5 mm, providing a reproducible acceptance check in production and incoming inspection. Which standard does the gauge comply with? The inspection ring is manufactured to DIN 13 with tolerance class 6g, ensuring compatibility with standard thread acceptance criteria. What material and treatment are used? The ring is produced from hardened gauge steel, chosen for wear resistance and dimensional stability under repeated inspections. How is the product identified for inventory and traceability? Identification is provided via article number M315.217.6 and GTIN 4054469125879 for inventory, audit trails and procurement processes. Can the ring be used for left‑hand threads? This specific inspection ring is configured for right‑hand threads; left‑hand thread checks require the corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M17×1 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of fast, unambiguous Go/no‑go checks and proven conformity to DIN 13 (6g), combined with a hardened construction that resists wear under repeated use; order directly via Metav Werkzeuge or consult the specialists for application advice. Go Ring Gauge M17 x 1 mm — Ring gauge (DIN 13, 6g), hardened gauge steel, right‑hand thread The Go Ring Gauge M17 x 1 mm is a hardened ring gauge for rapid Go/no‑go inspection of metric ISO fine threads in production and quality control. Hardened gauge steel, robust and wear‑resistant Conforms to DIN 13 with tolerance 6g For M17×1 mm metric ISO fine threads, right‑hand Rapid, reliable thread verification for production lines The ring gauge is designed to provide a quick, objective check for threaded parts: a part that passes the Go ring meets the maximum material and dimensional requirements specified by the relevant standard. Using a dedicated ring gauge reduces subjective interpretation in the workshop and enables consistent acceptance criteria during incoming inspection or inline quality control. The hardened construction ensures that dimensional stability and repeatability remain high even after frequent use, which supports uninterrupted production and fewer rework cycles. Built to retain accuracy and resist wear Manufactured from hardened gauge steel, the gauge resists abrasion and retains its calibrated form over time, so calibration intervals are longer and traceability is simpler to manage. Compliance with DIN 13, tolerance 6g provides an established reference that aligns with industry inspection routines for metric threads. These characteristics translate into lower lifetime cost and predictable measurement behaviour: the gauge is a tool for preventing assembly issues and avoiding costly rejects further down the line. Integrates with standard quality workflows The ring gauge is suitable for use at inspection benches, assembly stations and receiving goods areas. As a Go‑only gauge, it is used where verification of minimum clearance and thread engagement is required. Its compact form and light weight make it straightforward to handle during repetitive checks, and it fits established test routines without additional equipment. For traceability, record the gauge identifier and inspection result in the quality log to ensure an auditable trail of conformity checks. Who benefits and typical applications Machine shops, tool rooms, and quality departments that manufacture or inspect threaded components for hydraulic fittings, mechanical assemblies or instrumentation will find this gauge particularly useful. It is optimised for metric ISO fine threads with an M17×1 pitch, right‑hand execution, and is intended for short, decisive checks that remove ambiguity from go/no‑go decisions. Where fast throughput and clear accept/reject criteria are priorities, this gauge is a practical, cost‑effective solution. For assured thread conformity and durable inspection tools choose the Metav IndustryLine Go ring gauge supplied via Metav Werkzeuge — for application guidance and availability contact Metav Werkzeuge in Emmerich for personalised advice and prompt handling. Technical Data SKU: M315.117.4 GTIN: 4054469124209 Weight: 0.2 kg Thread: M17×1 mm Standard: DIN 13, 6g Data Pitch: 1 mm Tolerance class: 6g Tariff number: 90173000 Special features Material: hardened gauge steel Type: Go ring gauge (good) Thread direction: right‑hand Category: ring gauge for metric ISO fine threads FAQ What does the Go designation mean for this ring gauge? The Go designation indicates the ring is intended to check that a threaded part does not exceed the maximum material limit; the Go ring for M17×1 mm confirms acceptable maximum dimensions for the specified thread form. Is this gauge suitable for fine threads and which standard does it follow? Yes. The gauge is designed for metric ISO fine threads and conforms to DIN 13 with tolerance 6g, making it suitable for standardised inspection procedures. How robust is the gauge for frequent shop‑floor use? Made from hardened gauge steel, the ring gauge is wear‑resistant and designed to maintain dimensional stability under repetitive use, extending service intervals and ensuring consistent checks. Can the ring gauge be used for left‑hand threads? This item is manufactured for right‑hand threads only; left‑hand versions must be ordered separately if required for specific applications. What information should be recorded during inspection with the gauge? Record the gauge SKU (M315.117.4), date, operator and pass/fail result to maintain traceability of Go checks within quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M17×1.5 Thread Ring Gauge, Metric ISO Fine Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of fast go/no‑go assessment, conformity to DIN 13, 6g, and robust hardened gauge steel construction to keep thread inspection efficient and reliable on the shop floor — order directly via Metav Werkzeuge or consult the team for guidance. Thread ring gauge M17 x 1.5 mm — Go gauge (DIN 13, 6g) by Metav IndustryLine The Thread ring gauge M17 x 1.5 mm 'Go' (DIN 13, 6g) is a precision inspection tool for fast verification of right‑hand metric ISO fine threads in production and quality control. Go gauge for M17 x 1.5 metric ISO threads Manufactured to DIN 13, tolerance class 6g Made from hardened gauge steel Suitable for production and quality control Quick, repeatable go/no‑go checks that save time and costs The ring gauge is designed for immediate go/no‑go assessment, enabling operatives to confirm conformity within seconds and thus reduce cycle time at end‑of‑line inspection. With the M17 x 1.5 specification and 6g tolerance class, the gauge provides a decisive pass/fail indication that prevents unnecessary rework and rejects. Fast tactile feedback from the inspection tool supports higher throughput in batch production while maintaining consistent quality levels. Durable construction for long service life and stable measurements Manufactured from hardened gauge steel, the device resists wear and maintains dimensional integrity across repeated use. The adherence to DIN 13 gives a clear reference for thread form and tolerancing, so the inspection result is traceable to established standards. The compact, robust design minimises the influence of handling and environmental factors on measurement reliability, which lengthens the service interval and reduces lifetime cost of ownership. Practical integration into workshop and QA processes As a dedicated metric ISO thread inspection instrument, the ring gauge suits shop‑floor use, assembly stations and quality laboratories where quick decision‑making is required. The right‑hand thread configuration matches standard fastening practices, so it integrates directly into existing inspection routines. For traceable inventory and ordering, the item is listed as SKU M315.117.6 and can be stocked alongside other gauges to create a coherent inspection set. Contact Metav Werkzeuge for reliable supply of Metav IndustryLine gauges and practical advice on fitting this ring gauge into production or inspection workflows Technical data Article number: M315.117.6 GTIN: 4054469124216 Weight: 0.2 kg Material: hardened gauge steel Thread size: M17 x 1.5 Standard: DIN 13, 6g Dimensions & measurable data Nominal thread: M17 x 1.5 Tolerance class: 6g Weight: 0.2 kg Tariff code: 90173000 Special features Go ('gut') ring gauge for right‑hand metric ISO fine threads Hardened gauge steel construction Manufactured to DIN 13 standard Category: Gauges / Inspection tools FAQ What does the 'Go' designation mean for this ring gauge? The 'Go' gauge confirms that an external/threaded part fits within the lower limit of tolerance; the Thread ring gauge M17 x 1.5 mm 'Go' ensures accepted parts will assemble correctly. Which standard and tolerance class does this gauge conform to? This ring gauge is produced to DIN 13 with tolerance class 6g, providing conformity to common metric ISO fine‑thread specifications. Is the gauge suitable for shop‑floor use or only for laboratories? The robust hardened gauge steel construction and straightforward pass/fail operation make the gauge suitable for both shop‑floor inspection and laboratory checks. Can this gauge be used for left‑hand threads? No — the supplied gauge is configured for right‑hand metric ISO fine threads (M17 x 1.5). Left‑hand thread inspection requires a dedicated left‑hand gauge. What is the SKU for ordering or stocking this item? The product is stocked under SKU M315.117.6, listed in the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18 x 1 mm Go Thread Ring Gauge Metric ISO Fine Thread Right Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, precise DIN 13 / 6g specification and compact handling for fast, repeatable thread verification; order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread Ring Gauge M18 x 1 mm — hardened ring gauge, DIN 13 (6g) The Thread Ring Gauge M18 x 1 mm is a hardened inspection ring for right‑hand metric ISO fine threads, intended for quick pass/fail checks in production and incoming‑goods control. Hardened gauge steel construction Conforms to DIN 13 tolerance 6g For M18 x 1 mm metric ISO fine threads Reliable pass/fail control that speeds production A hardened ring gauge provides an immediate, objective decision for threaded parts: accepted or rejected. The combination of stable material and an industry standard tolerance (DIN 13, 6g) reduces uncertainty in everyday inspection tasks and shortens cycle times at the control station. Used as a routine check, the gauge removes subjective judgement from thread assessment and supports consistent quality output. Clear specification for traceable inspection The DIN reference and tolerance class communicate exactly what is being checked: M18 x 1 mm threads against the 6g tolerance for metric ISO fine threads. This clarity simplifies documentation and traceability in quality records and audit trails. Where a numeric specification is required for process sheets or inspection plans, the stated standard supplies an unambiguous acceptance criterion. Robust material for repeated in‑line use Made from hardened gauge steel, the gauge resists wear under frequent use, so its gauging edge remains reliable over time. The compact mass and form permit straightforward handling on the shop floor and quick integration into standard inspection benches, reducing the need for elaborate fixtures while preserving repeatability. Designed for practical workshop integration The compact construction and clearly defined application—right‑hand metric ISO fine threads—make this ring gauge suitable for production, assembly checks and incoming‑goods control. Fit‑for‑purpose design means minimal operator training is required: the gauge delivers an uncomplicated, fast inspection method that supports lean workflows. Built for dependable quality assurance By applying a standardised, hardened gauge for thread control, measurement variability is minimised and scrap rates can be reduced through early detection of out‑of‑tolerance threads. The device is a pragmatic tool for machine shops and quality departments seeking robust, low‑complexity control measures that integrate with existing inspection routines. For reliable thread inspection choose Metav IndustryLine — request the Thread Ring Gauge M18 x 1 mm from Metav Werkzeuge in Emmerich or contact our technical consultants at info@metav-werkzeuge.com / +49 2822 7131930 for advice and fast supply Technical data SKU: M315.218.4 GTIN: 4054469125909 Label: Gewinde‑Lehrring M18 x 1 mm Aussch. DIN 13, f. metr. ISO‑Feingewinde, rechts Numbers / Core technical data Thread size: M18 x 1 mm Weight: 0.14 kg Customs tariff number: 90173000 Materials / Special features Material: hardened gauge steel Standard: DIN 13, tolerance 6g Application: metric ISO fine threads, right‑hand Categories: Lehren (gauges); Messstifte (measuring pins) FAQ How is the gauge used in a production environment? The Thread Ring Gauge M18 x 1 mm from Metav IndustryLine is used for quick pass/fail checks of M18 x 1 mm right‑hand threads, allowing operators to verify conformity to DIN 13 / 6g without complex set‑ups. Is the gauge suitable for frequent shop‑floor use? Yes. Constructed from hardened gauge steel, the ring gauge is designed to withstand repeated engagement and maintain its measuring edge during routine inspection. Does this gauge check fine threads specifically? The device is intended for metric ISO fine threads with pitch and diameter matching M18 x 1 mm; it verifies right‑hand threads as specified. What documentation is available for this item? The product is supplied with clear specification data (DIN 13 / 6g) and the SKU M315.218.4 for traceability in inspection records and procurement systems. Can this gauge be used for incoming‑goods control and final inspection? Yes. Its standardised tolerance and robust construction make it suitable for incoming‑goods checks, assembly verification and final quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x0.75 Limit Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of DIN 13, 6H conformity, hardened gauge steel construction and compact form factor for reliable, repeatable thread inspection in production. Order the limit thread plug gauge M18 x 0.75 directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug gauge M18 x 0.75 — Metric ISO fine thread, right-hand (Metav IndustryLine) Limit thread plug gauge M18 x 0.75 verifies metric ISO fine threads in production and quality control with a compact go/no-go design ideal for workshop and shop-floor use. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H M18 × 0.75 metric fine thread Right-hand thread inspection tool Repeatable precision for routine thread checks The limit thread plug gauge offers a straightforward, standards‑based method for pass/fail assessment of internal threads. Manufactured from hardened gauge steel, the gauge provides stable contact geometry that resists wear and preserves the reference shape. Compliance with DIN 13, 6H means the gauge checks the thread form against a recognised tolerance class, ensuring that parts leaving production meet specified mating requirements. This tool converts dimensional requirements into a simple tactile check, significantly speeding up inspection cycles while maintaining consistency. Clear go/no-go logic reduces inspection uncertainty Designed for quick application on the shop floor, the gauge uses the established two‑end principle: one end confirms the maximum acceptable material condition, the other the minimum. The M18 x 0.75 specification and right-hand orientation are matched to common metric fine-thread components, so verification is immediate and unambiguous. For operators with limited metrology background, the gauge translates technical tolerances into a binary result, lowering training demand and reducing the chance of incorrect acceptance. The compact form supports rapid sample testing during in-process checks and final inspection. Durable construction and traceable quality for production use Weighing approximately 0.16 kg and produced under Metav IndustryLine procedures, the gauge combines robustness with manageable handling. The hardened construction resists deformation under normal use, extending service life and reducing replacement frequency. For quality systems, the gauge’s conformity to DIN 13, 6H provides a traceable reference point in inspection routines and documentation. Metav’s quality filter in Emmerich supports product consistency across batches, offering industrial customers reassurance that the instrument is suited to repetitive use in machining and assembly environments. Choose the Metav IndustryLine limit thread plug gauge for reliable DIN 13 conformity and robust shop-floor performance; contact Metav Werkzeuge for supply details and technical advice. Technical Data Article number: M315.018.3 SKU: M315.018.3 GTIN: 4054469122564 Facts Thread size: M18 x 0.75 Weight: 0.16 kg Standard: DIN 13, 6H Special features Material: gauge steel, hardened Thread hand: right-hand Category: thread gauge, thread plug gauge FAQ What does the M18 x 0.75 designation mean? The designation specifies a metric ISO fine thread with an 18 mm nominal diameter and a 0.75 mm pitch; the limit thread plug gauge M18 x 0.75 checks that internal threads conform to that form and pitch. How is conformity to DIN 13, 6H relevant for inspection? DIN 13, 6H defines the thread form and tolerance class; using a gauge conforming to DIN 13, 6H ensures that the part matches standard mating requirements expected in mechanical assemblies. Is the gauge suitable for production shop‑floor use? Yes, the Metav IndustryLine limit thread plug gauge is made from hardened gauge steel for durable, repeatable checks during routine production and final inspection. How are go/no‑go results interpreted with this gauge? One end represents the maximum material condition and must enter freely for a pass; the other end represents the minimum and must not enter if the part is within tolerance, providing a clear pass/fail outcome. Can this gauge be used for non‑standard threads? This gauge is designed specifically for M18 x 0.75 metric ISO fine threads with right‑hand orientation; non‑standard thread forms or sizes require a matching, dedicated gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x0.75 Thread Ring Gauge For Metric ISO Fine Thread Right Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge steel construction and strict DIN 13 6g conformity for rapid, repeatable thread inspection; the go design shortens check cycles while safeguarding production quality. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M18 x 0.75 (Go) – Metric ISO fine thread gauge, Metav IndustryLine The Thread ring gauge M18 x 0.75 (Go) serves as a hardened reference for fast conformity checks of right-hand metric ISO fine external threads in production and quality control. Hardened gauge steel construction DIN 13 tolerance class 6g For M18 x 0.75 metric fine threads Go gauge for right-hand threads Rapid verification with certified tolerances This inspection ring is engineered to provide quick, reliable acceptance checks on external threads. The M18 x 0.75 dimension and DIN 13 6g tolerance class are implemented to mirror standard metric fine-thread requirements, so conformity can be determined at first fit. As a go ring, it confirms that the external thread meets the maximum material condition limits; a successful fit signals that the part is within specified limits, reducing ambiguous measurements and avoiding unnecessary rework. The hardened gauge steel body maintains form under repeated use, supporting consistent results across production batches. Minimise downtime and simplify shop-floor checks Designed for frequent use on the shop floor, the ring gauge speeds up routine inspections by replacing complex measurement steps with a single tactile test. The right-hand configuration matches standard assembly conditions and helps prevent misapplication during inspection. The robust design reduces seasonal variation in handling and keeps maintenance predictable; worn gauges can be identified quickly, ensuring that only compliant fixtures remain in service. Faster acceptance checks translate into improved throughput without compromising dimensional control. Durability, traceability and practical handling Manufactured with wear resistance in mind, the gauge offers a durable reference for long-term process stability. The compact form and 0.21 kg mass make handling straightforward in production and inspection environments, while compliance with recognised standards ensures compatibility with established quality systems. For teams seeking reproducible measurement routines, the ring functions as a simple, fast verification tool that integrates with existing workflows and supports clear go/no-go decisions on threaded components. For reliable, shop-floor-ready thread inspection choose the Metav IndustryLine ring gauge and contact Metav Werkzeuge for a tailored recommendation or to request a formal quotation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.118.3 GTIN: 4054469124230 Weight: 0.21 kg Thread size: M18 x 0.75 Material: gauge steel, hardened Standard: DIN 13, 6g Thread direction: right-hand Tariff number: 90173000 Facts Nominal diameter: 18 mm Pitch: 0.75 mm Tolerance class: 6g Mass: 0.21 kg Special features Go gauge (acceptance check for external threads) For metric ISO fine threads Right-hand thread Complies with DIN 13 Hardened gauge steel construction FAQ How is the ring gauge used in routine inspections? The Thread ring gauge M18 x 0.75 (Go) is placed over the external thread; a smooth, full engagement indicates conformity to the specified DIN 13 6g limits while any binding signals a non-conforming part. Can the gauge be used on assembly fixtures as well as for final inspection? Yes, the Metav IndustryLine thread ring gauge is suitable for quick checks in assembly and final inspection to confirm that external threads meet the required fit for mating parts. What does the 'go' designation mean for this gauge? The 'go' designation confirms that the external thread is within the maximum material condition; the ring should engage without excessive force when the thread is acceptable. Is the gauge suitable for frequent shop-floor use? The hardened gauge steel construction of this ring gauge is designed for regular use, providing consistent results and predictable wear characteristics in production environments. Which standard does this gauge comply with? This inspection ring conforms to DIN 13 with a 6g tolerance class for metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x0.75 Thread Ring Gauge Right-Hand ISO Fine Thread Go/No-Go DIN 13, 6g - Metav IndustryLine
Take advantage of a hardened gauge steel construction and DIN 13 tolerance for reliable rejection of non-conforming threads; the no‑go function speeds up quality control and reduces downstream rework. Order this gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M18 x 0.75 mm (No‑Go) – DIN 13, Metav IndustryLine Thread ring gauge M18 x 0.75 mm (No‑Go) for rapid inspection of metric ISO fine threads in production and incoming‑goods control Hardened gauge steel construction No‑Go function for fast rejection DIN 13 tolerance class 6g Compact, lightweight at 0.14 kg Faster, more reliable thread inspection on the line The No‑Go ring is designed to provide an unequivocal rejection criterion for M18 x 0.75 mm metric ISO fine threads. Thanks to the DIN 13 specification and 6g tolerance class, the gauge delivers a standardised reference that simplifies pass/fail decisions during routine checks. In practice, using this rejection ring reduces the time spent on subjective assessments and lowers the risk of non‑conforming parts entering the next production step — a clear productivity and quality advantage for assembly and supply‑chain processes. Durable design for repeatable handling and long service life Manufactured from hardened gauge steel, the ring is built to withstand frequent handling and maintain its geometry over prolonged use. The compact, lightweight design (0.14 kg) supports quick manual checks without fatigue, while the right‑hand thread form matches standard fastening conventions. These characteristics combine to provide wear resistance and reliable tactile feedback, so operators can perform consistent inspections with minimal training and without elaborate fixtures. Traceability and compliance that support quality management Conformity to DIN 13 and the clear labelling with the SKU ensure easy documentation and integration into quality records. The gauge’s unambiguous No‑Go function complements statistical process control by providing a definitive failure state, which helps to identify process drifts early. Supplied under the Metav IndustryLine brand, this gauge benefits from Metav’s role as a European quality filter — trusted sourcing and dependable logistics from Emmerich support consistent supply to workshops and production sites. For a practical assessment of how this Metav IndustryLine No‑Go thread ring can be integrated into existing inspection routines, request a procurement consultation from Metav Werkzeuge or have the gauge supplied directly from our Emmerich distribution centre. Technical data Article number: M315.218.3 Thread: M18 x 0.75 mm Material: gauge steel, hardened Standard: DIN 13, 6g Weight: 0.14 kg GTIN: 4054469125893 Facts Tariff number: 90173000 Tolerance class: 6g Weight (kg): 0.14 Thread pitch (mm): 0.75 Special features No‑Go gauge (rejection ring) Right‑hand thread Category: Gauges / Lehren Manufacturer brand: Metav IndustryLine FAQ What is the primary use of this No‑Go ring? The No‑Go ring is intended for definitive rejection of non‑conforming M18 x 0.75 mm metric ISO fine threads; the Thread ring gauge M18 x 0.75 mm (No‑Go) by Metav IndustryLine provides a quick, repeatable check for production and incoming‑goods inspection. Is the gauge suitable for workshop daily use? Yes. The hardened gauge steel construction and compact form factor make the M18 No‑Go ring suitable for frequent manual checks in workshop environments; its robustness supports reliable handling and repeatability. How does the DIN 13, 6g specification affect inspection? DIN 13 with tolerance class 6g defines the dimensional limits and thread form used for this gauge; the specification ensures that the Thread ring gauge M18 x 0.75 mm (No‑Go) matches standard metric ISO fine‑thread requirements for consistent pass/fail evaluation. Can the SKU be used for ordering or inventory? Yes. Use the article number M315.218.3 when ordering or recording the gauge in stock lists to ensure the correct Metav IndustryLine No‑Go thread ring is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x1 Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a compact, hardened gauge steel construction and strict DIN 13 / 6H conformity for reliable go/no‑go thread checks; order directly via Metav Werkzeuge or contact our consultants for application advice. Limit thread plug gauge M18 × 1 mm — Metav IndustryLine, DIN 13 6H The Limit thread plug gauge M18 × 1 mm is a right‑hand metric ISO fine‑thread inspection gauge designed for fast go/no‑go verification in production and incoming inspection Hardened gauge steel construction Conforms to DIN 13, tolerance class 6H Compact 0.13 kg for easy handling Right‑hand ISO fine thread M18 × 1 Ensure repeatable thread acceptance at the point of inspection The compact limit thread plug gauge delivers a straightforward go/no‑go result for M18 × 1 mm fine threads, supporting consistent quality control on the shop floor. Conformity with DIN 13 and 6H tolerance class provides a recognised acceptance criterion, reducing subjective interpretation during inspection. Using a dedicated thread master streamlines production checks and shortens decision cycles, which in turn lowers the rate of rework and improves overall throughput. Robust materials for long service life and low maintenance Manufactured from hardened gauge steel, the tool resists wear from repeated engagement with threaded parts and maintains form stability over numerous cycles. The low mass (0.13 kg) and compact shape make the gauge easy to handle for single‑operator checks while its hardened finish maintains measuring edges, prolonging service intervals. These attributes translate into fewer interruptions for tool replacement and a lower total cost of ownership in continuous production environments. Practical integration into inspection routines and traceability The plug gauge is suited to incoming inspection, final assembly checks and random sampling during process control. As a simple, mechanical verification instrument, it requires no power source or calibration equipment to perform rapid accept/reject decisions on metric ISO fine threads. The product is delivered in ready‑to‑use condition; details such as the GTIN and article number support inventory management and traceability within quality systems. For specialised documentation or certification requirements, Metav Werkzeuge can advise on available calibration and certification options. For robust thread inspection backed by Metav IndustryLine quality, contact Metav Werkzeuge for tailored advice and procurement assistance from Emmerich; specialist consultants are available to discuss the correct gauge for each application Technical Data Article number: M315.018.4 GTIN: 4054469122571 Label: Grenzgewinde‑Lehrdorn M 18 x 1mm f. metr. ISO‑Feingewinde, rechts Numbers / Core technical data Thread size: M18 × 1 mm Tolerance class: 6H Weight: 0.13 kg Tariff number: 90173000 eClass: 21170235 Special features / Applications Material: gauge steel, hardened Right‑hand thread Conforms to DIN 13 For metric ISO fine thread inspection Category: Lehren / Messstifte Condition: good FAQ How is this gauge used for inspection? The limit thread plug gauge M18 × 1 mm by Metav IndustryLine is used for go/no‑go checks on right‑hand M18 fine threads; the go side verifies acceptable form and the no‑go side detects oversize or form defects. Which standard and tolerance does the gauge follow? This plug gauge is manufactured to DIN 13 and the tolerance class 6H, providing an industry‑standard acceptance reference for metric ISO fine threads. What material is the gauge made from and why does that matter? Made from hardened gauge steel, the gauge resists wear and preserves thread profiles during repetitive use, ensuring longer service life and consistent inspection results. Is the gauge suitable for production and incoming inspection? Yes, the gauge is designed for both incoming inspection and on‑line production checks where quick, unambiguous thread acceptance is required; SKU M315.018.4 supports stock and traceability processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x1 Thread Ring Gauge Go Metric ISO Fine Right-Hand DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a compact, standards‑compliant inspection tool that combines quick pass/fail checking with durable, hardened construction; the clear DIN 13, 6g specification and robust gauge steel ensure reproducible acceptance decisions on metric ISO fine threads. Order the gauge via Metav Werkzeuge or consult our advisers for application guidance. Thread Ring Gauge M18 x 1 mm 'Go' — hardened gauge steel, DIN 13 (Metav IndustryLine) The Thread Ring Gauge M18 x 1 mm 'Go' (DIN 13, 6g) is a hardened master ring for rapid verification of metric ISO fine internal threads in right‑hand assemblies. Hardened gauge steel construction DIN 13 tolerance class 6g For metric ISO fine threads M18 x 1 Rapid, unambiguous pass/fail inspection that saves time The 'Go' ring gauge performs a single, decisive check: if the ring engages, the thread meets the acceptance limit defined by DIN 13 and tolerance 6g; if it does not, the thread requires attention. This straightforward method reduces inspection time and prevents ambiguous measurements, making it ideal for repetitive quality control tasks where throughput and consistency matter. Using a master ring for acceptance testing removes operator interpretation from the go/no‑go decision and supports a lean inspection routine. Robust materials for long service life and repeatability Manufactured from hardened gauge steel, the ring resists wear and retains its calibrated form under frequent use. The hardened construction ensures dimensional stability and repeatable results over many cycles, reducing the need for frequent replacement. At approximately 0.09 kg, the gauge is easy to handle while remaining substantial enough to provide steady engagement with the part. The material choice and heat treatment translate directly into lower total cost of ownership through prolonged service life. Easy integration into inspection workflows and traceability The ring gauge suits shop‑floor usage where fast decisions are required and can be combined with a complementary no‑go ring where full go/no‑go testing is needed. The clear specification—M18 x 1, DIN 13, 6g—ensures interchangeability with other metric components and simplifies documentation in quality records. For procurement and identification, the item is listed as M315.118.4 (GTIN 4054469124247), enabling straightforward integration into inventory systems and process documentation. Choose the Metav IndustryLine M18 x 1 'Go' ring gauge for reliable thread acceptance checks and contact Metav Werkzeuge in Emmerich for tailored advice and supply. Technical Data Article number: M315.118.4 GTIN: 4054469124247 Label: Gewinde‑Lehrring M18 x 1 mm gut DIN 13, f. metr. ISO‑Feingewinde, rechts; 0,09 kg Weight: 0.09 kg Facts Thread size: M18 x 1 Tolerance class: 6g Standard: DIN 13 Tariff code: 90173000 eCl@ss: 21170214 Special features Material: hardened gauge steel Function: 'Go' (acceptance) ring gauge Thread type: metric ISO fine thread, right‑hand Category: gauges / ring gauges FAQ What is the purpose of a 'Go' ring gauge? The 'Go' ring gauge is used to verify whether an internal thread meets the acceptance limit; the Thread Ring Gauge M18 x 1 mm 'Go' confirms that an M18 x 1 internal thread is within the permitted DIN 13, 6g envelope. Does this gauge check both acceptance and rejection? This item is a 'Go' (acceptance) gauge; a corresponding no‑go ring is required to confirm rejection criteria in a full go/no‑go test sequence. What material and treatment does the gauge have? The ring is made from hardened gauge steel, chosen for wear resistance and long‑term dimensional stability. Is this gauge suitable for left‑hand threads? No; this ring is specified for right‑hand metric ISO fine threads only. How is the gauge identified for ordering and inventory? The product is listed under article number M315.118.4 and GTIN 4054469124247 for procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x1.5 Limit Thread Go Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of rapid, repeatable thread acceptance testing using a hardened gauge steel construction and the precise DIN 13, 6H tolerance for consistent production quality. Order this inspection tool directly via Metav Werkzeuge or consult Metav’s advisors for application-specific guidance. Metav IndustryLine Limit thread plug gauge M18 x 1.5 – right-hand, DIN 13 (6H) The Limit thread plug gauge M18 x 1.5 is a right-hand metric ISO fine-thread plug gauge designed for quick go/no-go verification in industrial quality control environments Right-hand metric ISO fine thread M18 x 1.5 Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Ensure conformity with a recognised standard for threads The hardened construction and adherence to DIN 13 with tolerance class 6H provide a verifiable basis for acceptance testing on metric fine threads. As a go/no-go tool, the plug gauge offers a binary, unambiguous result that simplifies decisions on whether a threaded part meets specification. The stable geometry of the gauge minimises measurement uncertainty and supports consistent quality documentation across production batches. Faster in-process checks reduce line disruptions Designed for quick manual inspection, this plug gauge enables radial and axial engagement checks without lengthy set-up or instrumentation. Implementing routine checks with the gauge helps to detect out-of-tolerance conditions early, preventing downstream rework and unscheduled stoppages. The simple pass/fail nature of the tool makes it suitable for shop-floor use, supporting lean manufacturing practices and improving throughput in machining and assembly operations. Durable build for repetitive industrial use Manufactured from gauge steel, hardened, the tool resists wear from repeated engagement and retains its calibrated form over extended use. The compact mass (approx. 0.16 kg) and robust material ensure easy handling and long service life under normal workshop conditions. Durability translates into fewer replacements and steady inspection performance, contributing to a lower total cost of ownership in inspection routines. Versatile for incoming inspection and final checks Suitable for machine shops, assembly lines and incoming goods inspection, the gauge verifies the functional fit of M18 x 1.5 threads produced to ISO metric fine-thread standards. Its right-hand configuration matches common thread directions in mechanical components. Using a standardised limit gauge supports interchangeability and traceable acceptance criteria across suppliers and production stages, reinforcing process reliability. Contact Metav Werkzeuge in Emmerich for ordering and tailored technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M315.018.6 GTIN: 4054469122588 Eclass: 21170235 Facts Thread size: M18 x 1.5 Pitch: 1.5 mm Weight: 0.16 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13, 6H Type: Limit plug gauge (go/no-go), right-hand Category: Gauges / Measuring devices FAQ What type of inspection is performed with this limit plug gauge? This limit plug gauge is used for go/no-go acceptance testing of metric fine threads, offering a clear pass/fail result for production and incoming inspection. Is the gauge suitable for use in a machine shop environment? Yes, the plug gauge from Metav IndustryLine is designed for routine shop-floor checks in machine shops and assembly areas where M18 x 1.5 threads are produced or received. What standard and tolerance does the gauge follow? The gauge conforms to DIN 13 with tolerance class 6H, ensuring compatibility with ISO metric fine-thread specifications. How long does the gauge maintain accuracy under normal use? Constructed from hardened gauge steel, the plug gauge retains its form and functional dimensions through repeated engagements, offering prolonged service life under standard workshop conditions. Can this gauge be used for supplier acceptance of threaded components? Yes, the Metav IndustryLine limit plug gauge provides a standardised, repeatable method for supplier acceptance checks on M18 x 1.5 threads Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x1.5 Thread Go Ring Gauge Metric ISO Fine Right-Handed Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Combine consistent acceptance checks with a hardened construction and DIN‑compliant tolerancing to reduce rework and keep assembly lines moving; the lightweight 0.14 kg format aids rapid handling and repeat inspections. Order the thread gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M18 x 1.5 mm — Go gauge, DIN 13 (Metav IndustryLine) The Thread ring gauge M18 x 1.5 mm is a precision go ring for verifying metric ISO fine threads in production and inspection environments, especially where conformity to DIN tolerances is required. Go ring gauge for M18 x 1.5 metric fine thread Hardened gauge steel construction Conforms to DIN 13 tolerance class 6g Lightweight 0.14 kg for simple handling Reliable inspection that prevents costly rejects A hardened gauge steel ring provides a stable, wear‑resistant contact surface for thread checks, which directly reduces measurement drift and repeat failures on the shop floor. The M18 x 1.5 sizing and go ring gauge function allow rapid pass/fail decisions during incoming inspection or final assembly, so throughput is maintained while non‑conforming parts are intercepted early. Designers and quality engineers benefit from a compact tool that keeps process control tight without complex set‑ups. Clear compliance with recognised standards Conformity to DIN 13 and the tolerance class 6g gives a verifiable baseline for acceptance criteria and audit trails. Using a standardised acceptance gauge streamlines documentation and supplier communication: inspection reports can reference the same tolerancing language used in technical drawings and purchase orders. The ring’s definition as a go gauge means it checks whether the internal thread meets minimum material conditions required for functional assembly rather than attempting a dimensional characterisation, which makes it ideal for fast quality gates. Practical handling and workshop benefits At just 0.14 kg, the component is lightweight and simple to handle on an inspection bench or in a mobile quality kit, reducing operator fatigue during repetitive checks. The hardened construction minimises wear, extending the interval between any maintenance actions and preserving the gauge’s effective life. For production engineers this translates into fewer stoppages, lower indirect costs from re‑gauging, and a more predictable acceptance rate for batches of fine‑thread components. What this means for procurement and QA Specifying the ring from Metav IndustryLine gives a compact, standards‑based control tool that integrates smoothly into existing quality workflows. The gauge’s straightforward design requires no special fixtures: its purpose is direct functional verification of metric ISO fine threads (right‑hand). For operations seeking to reduce scrap and maintain traceable inspection methods, this ring is a focused solution that balances robustness with easy use. Contact Metav Werkzeuge today to request delivery details for this Metav IndustryLine thread ring gauge or to arrange a specification review with our consultants at Metav Werkzeuge Technical data Article number: M315.118.6 GTIN: 4054469124254 Thread: M18 x 1.5 Type: Go ring gauge Manufacturer: Metav IndustryLine Weight: 0.14 kg Material: gauge steel, hardened Standard: DIN 13, 6g Right‑hand thread Core figures Weight: 0.14 kg Nominal diameter: 18 mm Thread pitch: 1.5 mm Tariff number: 90173000 Special features Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g Designed for metric ISO fine threads Right‑hand thread acceptance gauge Category: Gauges / Lehren FAQ What does a "go" ring gauge check? The Thread ring gauge M18 x 1.5 mm (Metav IndustryLine, SKU M315.118.6) verifies that internal metric ISO fine threads meet the minimum acceptance form for assembly; it confirms fit rather than producing a dimensional measure. Which standard and tolerance does this gauge follow? This ring complies with DIN 13 and is manufactured to tolerance class 6g, which is stated for the Thread ring gauge M18 x 1.5 mm and used as the acceptance criterion in many machine‑building applications. Is the gauge suitable for production use and frequent checks? Yes. The hardened gauge steel construction of the Metav IndustryLine ring is intended for repetitive inspection cycles and resists wear, supporting routine checks on production and incoming inspection stations. Can this gauge be used for right‑ and left‑hand threads? This specific item is manufactured for right‑hand metric ISO fine threads; alternative gauges are required for left‑hand thread variants. How should the gauge be stored to preserve accuracy? Store the ring in a clean, dry environment and avoid impacts. The compact 0.14 kg mass makes it easy to include in a calibrated inspection set or storage box for transport between stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x1.5 Thread Go Ring ISO Fine Pitch Right Hand, DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
The combination of DIN 13, tolerance 6g and hardened gauge steel provides dependable verification of fine metric threads while keeping handling straightforward thanks to its compact 0.14 kg mass; this supports consistent in‑process inspection and reduced rework. Order the thread ring gauge directly via Metav Werkzeuge or consult the Metav advisers for specification matching and fast delivery. Thread ring gauge M18 x 1.5 (DIN 13, 6g) – Metav IndustryLine The Thread ring gauge M18 x 1.5 is a right‑hand metric ISO fine‑thread verification gauge designed for production control and quality assurance in workshops and inspection benches. Hardened gauge steel construction Conforms to DIN 13 tolerance 6g For M18 x 1.5 metric fine threads Ensure reproducible thread checks on the production floor The ring is engineered for reliable verification of M18×1.5 threads and is dimensioned to provide repeatable go/no‑go checks in assembly and incoming‑goods inspection. Conformance to DIN 13 with a 6g tolerance class means the gauge matches common production limits for metric fine threads, allowing clear decisions without complex measurement setups. Using a dedicated thread ring gauge simplifies routine checks and reduces throughput time by replacing elaborate measuring sequences with a single, decisive inspection action. Durable build keeps calibration intervals long and results stable Manufactured from hardened gauge steel, the component resists wear from repeated engagement with mating threads, which keeps the functional profile stable over many cycles. This wear resistance helps maintain inspection confidence between calibrations and minimises downtime for maintenance. The compact mass of 0.14 kg aids quick handling and positioning, while the robust material supports consistent contact geometry — a combination that contributes to lower measurement uncertainty in daily quality routines. Practical compatibility and straightforward integration into QA processes The gauge is intended for right‑hand metric ISO fine threads in the M18×1.5 specification and fits naturally into assembly stations, inspection tables and portable inspection kits. Its single‑purpose design means staff training focuses on pass/fail assessment rather than complex interpretation, improving throughput and reducing operator variability. Where traceability is required, the piece can be recorded in inspection logs as a standardised verification tool, supporting audit trails and production records. Why reliable gauges matter: less rework, clearer decisions Using a purpose‑made ring gauge for thread validation transforms a subjective check into an objective control step. That reliability yields direct savings through fewer assembly errors, less rework and faster acceptance of incoming parts. For operations seeking to stabilise process quality, investing in a Metav IndustryLine verification gauge provides a pragmatic balance of precision and usability — a practical measure that supports continuous production targets without overcomplicating the inspection workflow. Contact Metav Werkzeuge for tailored delivery and expert advice on Metav IndustryLine thread gauges and ensure the correct gauge selection for production needs Technical data Article number: M315.218.6 GTIN: 4054469125916 SKU: M315.218.6 Facts Thread size: M18 x 1.5 Weight: 0.14 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, tolerance class 6g Orientation: right‑hand metric ISO fine thread Category: thread gauge / ring gauge FAQ What thread size does this gauge check? The thread ring gauge checks M18 x 1.5 metric fine threads and is manufactured to the DIN 13, 6g tolerance for reliable go/no‑go verification. Is the gauge suitable for production line inspection? Yes, the Metav IndustryLine thread ring gauge is designed for routine production and incoming‑goods checks where quick, unambiguous thread verification is required. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, ensuring wear resistance and consistent contact geometry over many inspection cycles. How is conformity assured against standards? Manufactured to DIN 13 with tolerance 6g, the ring gauge aligns with established metric ISO fine‑thread standards for quality control. Can this gauge be used for left‑hand threads? This particular gauge is a right‑hand specification for metric ISO fine threads; left‑hand versions require the corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x2 Gauge Go/No-Go Thread Plug For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
The product data contains contradictory condition information—both a positive quality flag and a reject/scrap indicator are present—so a reliable product description cannot be generated. This inconsistency makes it difficult to determine the accurate status of the product, which is essential for creating a clear and trustworthy specification. Please review the dataset thoroughly to ensure that condition and availability details are consistent and accurate. Once corrected, resubmit the updated dataset for further processing. A complete and reliable specification, along with marketing text, will be generated upon receipt of the corrected information. Thank you for addressing this issue promptly.
M18x2 Thread Go Ring Gauge Metric ISO Fine Right-Handed Hardened Gauge DIN 13, 6g - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 (6g) tolerance and the precise M18 x 2 mm fit for dependable go/no‑go thread inspection; order the ring gauge directly via Metav Werkzeuge or ask our consultants if needed. M18 x 2 mm Go thread ring gauge — DIN 13 compliant, hardened gauge steel M18 x 2 mm Go thread ring gauge for checking right‑hand metric ISO fine threads in production and quality control. Hardened gauge steel construction DIN 13 tolerance class 6g For M18 x 2 mm metric fine threads Right‑hand thread checking Consistent inspection through standardised tolerances The ring gauge is manufactured to DIN 13 with tolerance class 6g, providing a reproducible benchmark for thread quality in serial production. As a Go gauge, it confirms whether an external thread falls within the acceptable maximum material condition; this simplifies acceptance decisions and reduces downstream rework. The combination of standard conformity and a precise pitch of 2 mm supports traceable in‑process and final inspections. Durable construction for frequent shop‑floor use Made from hardened gauge steel, the ring is dimensionally stable and resistant to wear in a production environment. Its compact M18 x 2 form factor and right‑hand orientation allow fast handling during routine checks, improving line throughput and operator ergonomics. The modest mass of 0.19 kg makes the gauge easy to manipulate without compromising the rigidity required for repeatable checks. Practical integration and provenance for quality assurance Designed for metric ISO fine threads, the gauge suits incoming goods control, process checks and final inspection workflows. Identification with SKU M315.118.7 and GTIN 4054469124261 ensures clear traceability in procurement and calibration records. Supplied under the Metav IndustryLine umbrella, the tool benefits from Metav’s European quality screening, which supports reliable replenishment and consistent part verification across the supply chain. For precise thread testing with the hardened gauge steel of Metav IndustryLine, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and reliable supply. Technical data Article number: M315.118.7 GTIN: 4054469124261 Weight: 0.19 kg Facts Thread size: M18 x 2 mm Pitch: 2 mm Tolerance class: 6g Standard: DIN 13 Tariff code: 90173000 Special features Go gauge (acceptance 'good') Right‑hand metric ISO fine thread Hardened gauge steel material Suitable for production and incoming inspection eClass: 21170214 FAQ What standard does this ring gauge comply with? The M18 x 2 mm Go thread ring gauge conforms to DIN 13 and is produced to tolerance class 6g, which is specified in the product documentation. How is the gauge intended to be used in quality control? As a Go ring gauge, it verifies whether external threads meet the maximum material requirements for M18 x 2 mm metric ISO fine threads and is suitable for production checks and incoming inspection. What material and durability can be expected? The gauge is made from hardened gauge steel, providing robustness for frequent use and a long service life under normal inspection routines. Is this gauge suitable for left‑hand threads? This particular item is configured for right‑hand threads; left‑hand versions require a different‑handed gauge. Which identification codes help with traceability? Traceability is supported by SKU M315.118.7 and GTIN 4054469124261, which should be recorded in inspection and procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x2.5 Thread Limit Go Gauge, Metric ISO Pitch, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of proven DIN 13 conformity, hardened gauge steel construction and the compact, reliable M18 x 2.5 thread form to keep production inspections consistent and traceable; order this limit thread plug gauge directly via Metav Werkzeuge or consult our advisors for application support. Limit plug gauge M18 x 2.5 — right-hand metric ISO thread, DIN 13 6H (Metav IndustryLine) The Limit plug gauge M18 x 2.5 is a compact, hardened plug gauge for verifying right‑hand metric ISO standard threads in production and inspection environments Hardened gauge steel for long service life Conforms to DIN 13, tolerance class 6H Right-hand M18×2.5 metric ISO thread Precision where conformity matters The limit plug gauge is designed to give a quick, unequivocal check of internal threads. By matching the M18 x 2.5 metric ISO form and tolerance 6H of DIN 13, the gauge defines pass/fail for functional fit without the need for complex measurement routines. This direct verification speeds up incoming inspection and on‑line quality checks, reducing uncertainty in assembly processes and lowering the rate of rejected components due to thread nonconformance. Built to remain accurate under shopfloor conditions Manufactured from hardened gauge steel, this plug gauge resists wear and maintains its functional dimensions over repeated use, which protects measurement integrity and reduces the frequency of replacements. The compact mass (0.17 kg) and robust geometry facilitate handling during serial inspections. Using a dedicated limit gauge instead of subjective thread checks minimises operator variability and supports a reproducible quality routine that saves time and material costs through fewer reworks. Suited to production and laboratory inspection In both workshop and laboratory contexts the Limit plug gauge M18 x 2.5 serves as a fast go/no‑go control for thread acceptance; the right‑hand metric configuration suits common fastening tasks and standard component series. Employed at first‑piece inspection, batch release or final goods checks, the gauge provides an unequivocal statement about whether an internal thread meets the specified DIN 13 6H criteria, enabling decisive production control and traceable quality documentation. Choose Metav IndustryLine gauges for repeatable thread inspection — contact Metav Werkzeuge in Emmerich for tailored advice, availability and supply chain reliability. Technical Data Article number: M315.018 GTIN: 4054469122557 Manufacturer: Metav IndustryLine Facts Thread size: M18 x 2.5 Weight: 0.17 kg Standard: DIN 13, tolerance class 6H Special features Material: hardened gauge steel Thread form: metric ISO, right-hand Application: limit (go/no-go) thread verification Category: plug gauge for internal threads FAQ What is this gauge used for? The limit plug gauge M18 x 2.5 is used for quick go/no‑go checks of internal metric ISO threads to confirm compliance with DIN 13 tolerance class 6H. Is the gauge suitable for production inspection? Yes. The Metav IndustryLine plug gauge is intended for production, incoming and final inspection where fast, unambiguous thread acceptance is required. What does DIN 13, 6H mean for the user? DIN 13 with tolerance class 6H specifies the dimensional and tolerance band for standard metric internal threads; using this M18 x 2.5 gauge verifies that the thread meets those requirements. How should the gauge be stored and cared for? Store the gauge clean and dry; protect the functional surfaces from knocks and contamination. Regular visual checks and gentle cleaning preserve the hardened surface and functional fit. Can the plug gauge be used for functional assembly tests? Yes. The limit plug gauge provides a practical proxy for assembly fit by confirming that the internal thread meets the defined metric ISO profile and tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18x2.5 Thread Plug Gauge Metric ISO Right-Handed, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take reliable thread control into production: the hardened gauge steel construction and DIN 13, 6g tolerance ensure repeatable inspection results for metric ISO threads, while the clear designation as a no‑go (reject) ring supports strict quality gates in the workshop. Order or request advice directly from Metav Werkzeuge for fast supply and application support. Thread Ring Gauge M18 x 2.5 — Metav IndustryLine (DIN 13, 6g) Thread Ring Gauge M18 x 2.5 for right‑hand metric ISO threads, designed for fast go/no‑go checks in production and incoming inspection Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M18 x 2.5 metric ISO threads Designated as a no‑go (reject) ring Ensure consistent thread quality on the shop floor A compact inspection ring made from hardened gauge steel provides a stable reference that resists wear and maintains form under repeated use. The DIN 13 tolerance class 6g describes the mating limit for general metric ISO threads; using an inspection ring to verify this class reduces uncertainty at the point of assembly and prevents downstream rejects. The ring’s role as a no‑go verifier means it is intended to identify threads that exceed the acceptable tolerance band, supporting clear pass/fail decisions without elaborate measurement setups. Optimised for M18 x 2.5 metric ISO thread checks The geometry corresponds exactly to M18 x 2.5, right‑hand, enabling quick verification of commonly used fasteners and threaded components. As a purpose‑built thread ring gauge, it avoids the interpretation required by dimensional readouts and instead offers immediate go/no‑go assessment, saving time during high‑mix production runs. The inspection ring is particularly useful where throughput and repeatability matter: line testing, incoming goods inspection and first‑article checks benefit from its simple‑to‑use format and unambiguous results. Durable design for repeatable inspection cycles Constructed from tool‑grade steel and hardened to preserve the functional profile, this gauge resists normal workshop wear and provides sustained precision across many cycles. The robust material choice reduces the frequency of replacements and supports a predictable maintenance cadence in the quality system. When integrated into a control plan as a dedicated no‑go element, it contributes directly to improved product reliability and reduced rework costs by catching marginally out‑of‑tolerance threads early. Practical advantages for quality management Using a dedicated inspection ring streamlines operator training and simplifies documentation: acceptance criteria become immediate and demonstrable. The combination of a standardised tolerance class (6g) and a physically verified thread form makes the gauge an effective tool to enforce assembly standards and contractual specifications. As part of a calibrated inspection suite, such rings help uphold traceability and provide an efficient barrier against non‑conforming fasteners reaching assembly or delivery stages. For guaranteed thread inspection backed by Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for ordering and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.218 GTIN: 4054469125886 Manufacturer: Metav IndustryLine Core data Standard: DIN 13, tolerance 6g Thread size: M18 x 2.5 Direction: Right‑hand Tariff number: 90173000 Special features Hardened gauge steel material Designed for metric ISO standard threads Function: No‑go (reject) ring for go/no‑go inspection Category: Gauges / Lehren FAQ What is the intended use of this inspection ring? The inspection ring serves as a no‑go verifier for metric ISO threaded parts; it is used to detect threads that exceed the permitted tolerance band for M18 x 2.5 and thus must not be assembled. Does the gauge conform to a recognised standard? Yes, the ring is manufactured to DIN 13 and corresponds to tolerance class 6g, suitable for standard metric ISO thread checks. Which material is used for the ring and why? The ring is made from hardened gauge steel, selected to maintain profile accuracy and resist wear during repeated verification cycles. Is this ring suitable for right‑hand threads only? The supplied gauge is specified for right‑hand metric threads of size M18 x 2.5; left‑hand checks require a different ring. Can this gauge replace measuring instruments in routine checks? As a go/no‑go instrument, the ring provides immediate conformity decisions; it complements, rather than replaces, detailed dimensional measurement when traceable numeric data are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18×2 Thread Gauge Ring Three-Point Go/No-Go, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Taking advantage of a hardened gauge‑steel construction and strict DIN 13 / 6g tolerances ensures reliable rejection of oversize threads and long service life; order this thread verification tool directly via Metav Werkzeuge or consult our team for application advice. Thread ring gauge M18 x 2 mm (No-go) – DIN 13, 6g | Metav IndustryLine The Thread ring gauge M18 x 2 mm (No‑go) is a hardened ring gauge designed for quick verification of right‑hand metric ISO fine threads in production and incoming inspection. DIN 13, tolerance grade 6g Hardened gauge steel construction No‑go ring for M18 x 2 metric fine threads Ensure conformance with a simple go/no‑go check A dedicated No‑go ring provides a rapid, objective decision during final inspection or at the receiving goods desk. Manufactured to DIN 13 with 6g tolerance, the gauge defines the maximum acceptable material limit for an M18 x 2 thread: if the ring does not enter, the thread passes; if it fits, the thread is out of tolerance. This clear binary outcome reduces interpretation errors, shortens inspection time and supports systematic quality control across repetitive production runs. The simple mechanical verification is especially suited to busy shop floors where fast, reproducible checks are required. Robust materials for repeatable measurements and long service life Made from hardened gauge steel, the ring resists wear and retains its checking form across many cycles, lowering replacement frequency and total inspection cost. The compact mass of 0.14 kg makes handling straightforward and storage uncomplicated. For environments where consistent checking under production conditions is needed, the durable construction maintains dimensional integrity and helps avoid false acceptances that can be costly downstream. Periodic verification against a reference master keeps the gauge traceable within an established QA regime. Practical integration into workshop and production routines The ring is suitable for use in incoming inspection, production control and final assembly checks where M18 x 2 metric fine threads are common. As a purpose‑built verification tool it complements calibrated measuring equipment and can be implemented as part of a stepwise inspection plan to quickly screen batches before detailed measurement. Labelling with SKU M315.218.7 and the clear designation as a no‑go ring helps standardise shop‑floor procedures and documentation practices, supporting traceability and consistent quality outcomes. For dependable thread verification, contact Metav Werkzeuge in Emmerich to order the Metav IndustryLine No‑go ring or to discuss suitability for specific production setups. Technical data SKU: M315.218.7 GTIN: 4054469125923 Manufacturer: Metav IndustryLine Weight: 0.14 kg Thread designation: M18 x 2 Norm: DIN 13, 6g Facts Type: No‑go ring gauge Thread hand: Right‑hand Category: Gauges / Ring gauges Material: Hardened gauge steel Special features Intended for verification of metric ISO fine threads Rapid go/no‑go decision support Durable, wear‑resistant surface Workshop and production use Compact, easy to handle FAQ What does the No‑go ring check on a threaded part? The No‑go ring verifies whether an external thread exceeds the maximum material limit; if the ring fits onto the M18 x 2 part the thread is out of tolerance and must be rejected or reworked. Is this gauge suitable for production sampling or 100% inspection? The gauge is well suited to both fast sampling checks and 100% go/no‑go verification where a simple pass/fail result is required for M18 x 2 metric fine threads. What material and standard apply to this ring gauge? The ring gauge is made of hardened gauge steel and manufactured to DIN 13 with tolerance grade 6g, ensuring compatibility with common metric ISO fine‑thread specifications. How should the ring gauge be stored and maintained? Keep the gauge clean, dry and protected from mechanical damage; periodic comparison with a calibrated master or reference standard is recommended to confirm continued suitability for inspection tasks. Can the M315.218.7 be used for left‑hand threads? No; this specific ring is intended for right‑hand metric ISO fine threads and should not be used for left‑hand variants. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M18×2.5 Thread Go Ring Gauge Metric ISO Thread Right-Hand DIN 13, 6g, Hardened Gauge Steel - Metav IndustryLine
Benefit from precise, repeatable thread checks with a hardened gauge that fulfils DIN 13 tolerance 6g; compact and robust at 0.21 kg for efficient in‑line inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go ring gauge M18 x 2.5 — Go thread ring for metric ISO threads (DIN 13, 6g) A Go ring gauge M18 x 2.5 designed for fast verification of right‑hand metric ISO external threads in production and quality control M18 x 2.5 metric ISO thread go gauge DIN 13, tolerance 6g compliance Hardened gauge steel for durability Compact weight 0.21 kg for easy handling Reliable thread verification for efficient production The Go ring gauge delivers a straightforward, objective check of external threads, enabling quick pass/fail decisions at the machine or inspection bench. As a dedicated acceptance gauge for metric ISO threads, it confirms that the external thread conforms to the maximum material condition defined by DIN 13 and tolerance 6g, which simplifies go/no‑go workflows and reduces downstream rejects. Where throughput and reproducibility matter, a simple tactile check with this type of ring provides rapid feedback without elaborate setups, improving cycle time in serial operations. Built to withstand regular workshop use Manufactured from hardened gauge steel, this ring resists wear and retains form under frequent engagement, ensuring long service life and consistent repeatability. The compact construction and low mass make handling easier during repetitive checks; at 0.21 kg the gauge is light enough for ergonomically safe use while still rigid enough for reliable contact with the workpiece. Robust materials and finishing mean the gauge maintains its acceptance profile across many inspection cycles, lowering the need for frequent replacement and supporting stable process control. Clear standard conformity for unambiguous decisions Compliance with DIN 13 and the 6g tolerance class provides unambiguous acceptance criteria for M18 x 2.5 right‑hand threads. The Go ring confirms that an external thread is within the allowable maximum limits; a pass indicates the part will assemble where the mating internal thread meets the corresponding standard. This direct link to established standards reduces interpretation risk during quality checks and supports consistent documentation in inspection protocols, making traceability and auditability straightforward for production or incoming inspection. Practical applications and handling in the workshop Suited to in‑process checks, incoming goods inspection and final quality control, this ring gauge is ideal for mechanical workshops, component manufacturers and assembly operations working with metric ISO threads. The gauge’s right‑hand orientation and M18 x 2.5 size target common fastener and component interfaces, enabling immediate verification without additional fixtures. Simple visual and tactile methods are sufficient for routine checks; where required, the ring can be integrated into transfer stations or manual gauging benches to speed throughput while maintaining clear acceptance criteria. For reliable, standards‑based thread gauging in production, request the Metav IndustryLine M18 Go ring via Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for delivery details and application guidance Technical data Article number: M315.118 GTIN: 4054469124223 EClass: 21170214 Numbers / Core technical data Thread size: M18 x 2.5 Tolerance class: 6g Standard: DIN 13 Weight: 0.21 kg Tariff code: 90173000 Special features Material: hardened gauge steel Type: Go ring gauge for external threads Right‑hand metric ISO thread Category: Gauges / Inspection tools FAQ What does a Go ring gauge check for? A Go ring gauge verifies that an external thread conforms to the maximum material condition for the specified M18 x 2.5 metric ISO thread, indicating the part meets the acceptance limit in accordance with DIN 13. Is this gauge suitable for production use? Yes, the Metav IndustryLine go ring is intended for regular production and inspection use; its hardened gauge steel construction supports repeated engagement and consistent results. How is pass/fail determined with the ring? Pass is determined by the ability of the external thread to enter and fully seat in the Go ring gauge without excessive force; failure indicates the external thread exceeds the allowable limits for the specified tolerance class. Can the ring be used for left‑hand threads? This item is produced for right‑hand metric ISO threads; left‑hand checks require a ring specifically manufactured for that thread direction. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2 x 0.35 Thread Plug Gauge Go Metric ISO Fine Right-Hand DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of reproducible thread inspection with hardened gauge steel and DIN 13 (6g) tolerance for consistent production control; order the thread ring gauge M2 x 0.35 directly via Metav Werkzeuge or consult our specialists for application guidance. Thread ring gauge M2 x 0.35 — Metric ISO fine thread, Metav IndustryLine A thread ring gauge M2 x 0.35 for right‑hand metric ISO fine threads, designed for quick pass/fail checks and routine quality control in production and inspection environments Metric fine thread M2 x 0.35 Hardened gauge steel construction DIN 13 tolerance class 6g Right-hand Go ring for pass/fail checks Reliable verification aligned with DIN standards The gauge is produced to DIN 13 with tolerance class 6g, which ensures consistent acceptance criteria for metric ISO fine thread verification. As a Go gauge, it confirms that threads meet the minimum functional dimensions; passage of the ring indicates conformity with the specified tolerance band. This mechanical check reduces uncertainty in inspection steps and supports reproducible decisions in the workshop or production line. Robust material and compact handling for repeatable checks Manufactured from hardened gauge steel, the ring offers long service life and resistance to wear that could otherwise compromise measurement reliability. At approximately 0.01 kg, the unit is lightweight and easy to position, limiting handling errors during frequent use. The compact format and durable material combination lower maintenance needs and help to maintain a stable inspection routine over many cycles. Simple integration into quality workflows The ring gauge is intended for routine pass/fail inspection of right‑hand threads in assemblies and components, simplifying process control and traceability. The clear designation of M2 x 0.35 and 6g supports documentation and part planning, while the compact Go design speeds up repetitive checks. This makes the gauge suitable for small‑part production, toolrooms and service departments that require dependable, fast thread verification. For assured thread inspection choose the Metav IndustryLine thread ring gauge and contact Metav Werkzeuge in Emmerich for specialist advice and ordering: +49 2822 7131930, info@metav-werkzeuge.com Technical data Article number: M315.102.1 GTIN: 4054469123653 Brand: Metav IndustryLine Facts Thread size: M2 Pitch: 0.35 mm Tolerance class: 6g Weight: 0.01 kg Special features Material: gauge steel, hardened Right‑hand thread Go (pass) ring gauge Category: Thread gauges / Inspection FAQ Which tolerance standard does this gauge comply with? The thread ring gauge M2 x 0.35 is manufactured to DIN 13 and checks threads to tolerance class 6g, providing a clear acceptance criterion for metric ISO fine threads. What does "Go" mean for this ring gauge? "Go" indicates that the ring is intended for pass/fail inspection: a thread that accepts the Go ring conforms to the lower limit of the specified tolerance and is deemed usable for assembly. Is the gauge suitable for frequent workshop use? Yes, the gauge is made from hardened gauge steel, which delivers wear resistance for routine checks and helps maintain measurement reliability during repeated use. What is the product SKU for ordering and documentation? The item is listed under SKU M315.102.1 and identified as the thread ring gauge M2 x 0.35 (Go), Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2 x 0.35 Thread Ring Gauge Go, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Combine precise thread verification with a hardened‑steel build and DIN‑rated tolerances to streamline small‑part inspection. Order the gauge directly via Metav Werkzeuge or consult our technical advisers for integration into existing quality routines. Thread ring gauge M2 x 0.35 (DIN 13, 6g) — hardened gauge steel, Metav IndustryLine The thread ring gauge M2 x 0.35 is a compact limit gauge for checking external metric ISO fine threads (right‑hand), ideal for workshop inspection and small‑part production. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For metric ISO fine thread M2 x 0.35 Faster, repeatable verification for small threads A compact limit gauge delivers speed and repeatability in routine checks. The M2 x 0.35 size is specifically for metric ISO fine threads, providing a rapid pass/fail decision during assembly or incoming inspection. Conformity with DIN 13 and the 6g tolerance class means the gauge supports established industry limits, reducing interpretation and measurement time and helping to keep production throughput steady. Durable build that lowers lifecycle cost Made from hardened gauge steel, the device resists wear across many inspection cycles, preserving the thread profile and dimensional accuracy. The hardened construction ensures consistent contact with screw threads and reduces the need for frequent replacement, which in turn lowers overall tool‑room costs. Lightweight handling and compact dimensions facilitate fast checks on benches or at the machine without adding setup overhead. Simple integration into quality workflows Designed as a limit instrument, the gauge functions in go/no‑go workflows typical of mechanical workshops and small‑batch manufacture. The clear nominal size and right‑hand orientation permit immediate matching to production drawings and inspection plans. As a non‑electronic tool, it requires no power and can be used alongside calipers and micrometres to establish traceable sampling routines, making it straightforward to document results in quality records. Reliable sourcing and practical serviceability Sourcing through an established distributor provides access to consistent stock and technical guidance. Metav’s position as a European quality filter ensures the instrument is delivered with manufacturer traceability and rapid logistical support, helping to avoid gaps in inspection capability. For specialised applications, the available advice streamlines the selection of matching gauges and complementary inspection tools. Contact Metav Werkzeuge to discuss suitability for existing inspection processes or to request delivery details for the Metav IndustryLine M2 x 0.35 ring gauge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.202.1 GTIN: 4054469125329 Category: Lehren / Gauges Facts Nominal thread: M2 x 0.35 Tolerance class: 6g Weight: 0.01 kg TARIC/HS code: 90173000 Special features Material: hardened gauge steel Standard: DIN 13 Application: metric ISO fine thread, right‑hand Manufacturer range: Metav IndustryLine FAQ What thread does this gauge check? The ring gauge is specified for M2 x 0.35 external metric ISO fine threads and is right‑hand oriented. Is the gauge compliant with recognised standards? Yes, the instrument is manufactured to the DIN 13 profile and the tolerance is specified as 6g. What material is the gauge made from? The gauge is produced from hardened gauge steel to ensure dimensional stability and wear resistance. How is the gauge used in inspection workflows? It serves as a limit gauge for go/no‑go verification of external threads; it provides a rapid pass/fail result for incoming or in‑process checks. Can advice be obtained for matching gauges or inspection plans? Technical advisers at Metav can assist with selecting complementary gauges and integrating the device into inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2 x 0.4 mm Go Thread Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Benefit from a compact, standards‑compliant gauge that combines hardened gauge steel construction with DIN 13 / 6g conformity to secure repeatable thread inspections for small metric fasteners; order directly via Metav Werkzeuge or request technical advice from our consultants. Thread ring gauge M2 x 0.4 — hardened gauge steel, DIN 13 (6g) | Metav IndustryLine Thread ring gauge M2 x 0.4 is a precision limit gauge for verifying metric ISO threads in production control and laboratory inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Metric ISO thread verification M2×0.4 Compact, 0.01 kg for easy handling Reliable conformity checks that cut rework and inspection time The DIN 13 specification and 6g tolerance classification ensure that this gauge serves as a dependable reference during incoming inspection and process control. As a simple limit instrument it provides an immediate accept/reject decision, helping to reduce downstream rework and minimise inspection time per component. The small thread size is matched to common fastener standards, so measurement routines remain consistent across batches and suppliers. Built for repeatability and long service life Manufactured from gauge steel that is hardened, the device resists wear in frequent use and retains dimensional stability under normal workshop conditions. The compact mass and solid design deliver low moment of inertia for controlled handling while maintaining the contact geometry required for reliable checks. Where traceable equipment is needed in a production environment, this construction supports sustained accuracy without frequent replacement. Practical use in workshop and quality environments Designed for metric ISO right‑hand threads with the designation M2 x 0.4, the gauge is suitable for bench inspection, assembly control and spot checks on component runs. Its small footprint and light weight make it easy to include in inspection kits or at assembly stations. The item is supplied as SKU M315.202 and is identified by GTIN 4054469125312 for inventory and traceability in quality systems. For tailored advice on integrating DIN‑compliant gauges into inspection workflows, contact Metav Werkzeuge to discuss availability and application recommendations for the M315.202 thread ring gauge — Metav’s consultants provide direct support from Emmerich to your workshop Technical data SKU: M315.202 GTIN: 4054469125312 Weight: 0.1 kg Thread size: M2 x 0.4 Material: gauge steel, hardened Standard: DIN 13, tolerance 6g Tariff number: 90173000 Facts Category: Gauges / Lehren ECLASS: 21170214 Mass designation: M2x0,4 Identifying label: Gewinde‑Lehrring M2 x 0,4 mm Special features For metric ISO threads (right‑hand) Compact format for small thread verification Durable, hardened construction suitable for repetitive checks Designed for production and laboratory inspection FAQ What thread type is this gauge intended for? The thread ring gauge M2 x 0.4 is intended for metric ISO threads with a right‑hand profile and the M2 × 0.4 pitch, used for verification against the DIN 13 specification. Which standard and tolerance does the gauge meet? The gauge complies with DIN 13 and is manufactured to a 6g tolerance class to match standard metric ISO thread acceptance criteria. What is the material and how durable is the gauge? This gauge is made from hardened gauge steel, giving it wear resistance and dimensional stability for repeated use in production inspection. How is the gauge identified for inventory and traceability? The item is listed as SKU M315.202 and carries GTIN 4054469125312 for integration into inventory and quality management systems. Where is this gauge best applied within a workflow? The M2 × 0.4 ring gauge is suited to incoming inspection, inline process checks and bench verification tasks where quick go/no‑go assessment of small metric threads is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com