Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M20×2.5 Thread Gauge Ring Right-Hand ISO Metric, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise, standards‑based inspection with compact, hardened‑steel construction and clear conformity to DIN 13 (6g); order the thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread plug gauge M20 x 2.5 mm — limit plug gauge, DIN 13 (6g) by Metav IndustryLine Thread plug gauge M20 x 2.5 mm is a hardened inspection ring designed for fast pass/fail verification of metric ISO threads in production and incoming inspection Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M20 x 2.5 ISO metric threads Compact, workshop-ready inspection tool Rapid, standards-based pass/fail control that protects production flow A limit plug gauge specified to DIN 13 with 6g tolerance enables immediate go/no‑go decisions at the workstation, reducing throughput interruptions and limiting costly rework. The gauge checks the fundamental geometric criteria for an M20 connection, converting a complex measurement task into a binary check that aligns with common quality plans. As a simple inspection tool, it increases process reliability while keeping operator training requirements low, supporting continuous production without compromise. Durable materials and form for repeatable checks Manufactured from hardened gauge steel, the component resists wear from frequent use and maintains dimensional stability across inspection cycles. The compact, low‑mass design offers easy handling and quick orientation in confined inspection stations; its robustness minimises calibration frequency and tool replacement. These attributes translate into dependable repeatability and fewer unplanned interruptions in the inspection flow, which together improve uptime and deliver consistent quality documentation. Practical fit for workshop and quality lab routines Engineered for metric ISO threads and right‑hand applications, the gauge performs reliably in production control and incoming goods testing. The straightforward function of the ring supports fast decision-making during assembly or surface treatment operations, reducing the chance of defective parts proceeding through the value chain. Supplied as a ready‑to‑use inspection device, it integrates with standard tooling sets and inspection benches, making it suitable for both routine shop‑floor checks and traceable quality procedures. Choose the Metav IndustryLine thread plug gauge for robust, standards‑compliant thread inspection and contact Metav Werkzeuge for tailored delivery and consultancy. Technical data SKU: M315.220 GTIN: 4054469125930 Weight: 0.2 kg Thread size: M20 x 2.5 mm Standard: DIN 13 (6g) Handing: right‑hand thread Material: hardened gauge steel Tariff code: 90173000 Facts Thread: M20 x 2.5 mm Weight (approx.): 0.2 kg GTIN: 4054469125930 Tariff number: 90173000 Special features Hardened gauge steel construction Limit plug gauge for go/no‑go testing Conforms to DIN 13 tolerance class 6g Intended use: production control, incoming inspection Category: Gauges / Inspection rings FAQ What thread size does this gauge inspect? The gauge inspects M20 x 2.5 mm metric ISO threads and is specified as a limit plug for quick pass/fail checks. Which standard does the gauge comply with? Compliance is with DIN 13, tolerance class 6g, ensuring alignment with common workshop and laboratory inspection criteria. What material is used for the gauge? The ring is produced from hardened gauge steel, chosen for durability and dimensional stability under repeated use. Is the gauge suitable for production‑line use? Yes — the limit plug gauge is designed for rapid go/no‑go verification in production control and incoming inspection routines. What is the product SKU for ordering and traceability? This item is listed as SKU M315.220 and carries GTIN 4054469125930 for clear traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22 x 2mm Screw Thread Plug Gauge Go Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of DIN 13 compliance, a 6g tolerance and hardened gauge steel to ensure consistent acceptance checks for M22 x 2 mm metric fine threads; order this Go ring directly via Metav Werkzeuge or consult our product specialists for integration support. Thread ring gauge M22 x 2 mm (Go) — hardened gauge steel, DIN 13 (6g) · Metav IndustryLine The Thread ring gauge M22 x 2 mm (Go) is a right-hand inspection ring designed for quick verification of metric ISO fine threads in production and incoming inspection, providing a compact, robust solution for go/no-go control. DIN 13 standard, tolerance 6g Hardened gauge steel for long service life Right-hand metric Go ring for M22 x 2 mm threads Traceable quality from Metav IndustryLine Dependable compliance for routine thread inspection The ring is manufactured to DIN 13 with a stated 6g tolerance, offering a straightforward conformity check against the nominal thread form. As a Go gauge, it verifies that internal threads meet the minimum material condition for assembly; a full entry without undue force confirms acceptance. Built from hardened gauge steel, the component provides wear resistance and dimensional stability, which reduces the frequency of replacement and keeps process interruptions to a minimum. This combination supports efficient quality control and predictable assembly outcomes. Practical benefits for shop-floor and quality workflows Designed for rapid tactile checks, the ring gauge reduces cycle time during sampling and routine inspection. The compact form and clear designation as a right-hand Go gauge make it easy to integrate into visual inspection stations or fixture-based checks. Using a dedicated ring for the M22 x 2 mm fine thread prevents ambiguous assessments that can lead to unnecessary rework; instead, the tool delivers an immediate pass/fail decision that aligns with established inspection plans. Traceable identification and consistent material selection further support reproducible results across shifts. Handling, care and correct usage to preserve accuracy Correct use preserves gauge life and measurement reliability: engage the ring with gentle hand torque until full thread engagement is felt, avoid forcing past light resistance and store the gauge in a dry, protected environment to prevent corrosion. The hardened construction mitigates wear, but periodic verification of the ring against reference standards is recommended for critical production environments. When used as intended, the ring provides a reliable go/no-go control method for ensuring parts meet the thread acceptance limits defined by the standard. For procurement and technical advice on Metav IndustryLine thread gauges, contact Metav Werkzeuge for tailored recommendations and immediate availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.122.7 SKU: M315.122.7 GTIN: 4054469124360 Tariff code: 90173000 Facts Thread size: M22 x 2 mm Tolerance class: 6g Weight: 0.28 kg Thread direction: Right-hand Special features Material: hardened gauge steel Standard: DIN 13 Type: Go ring gauge for metric ISO fine threads Brand: Metav IndustryLine FAQ What is the primary function of this ring gauge? The ring is intended for acceptance testing of internal metric fine threads; as a Go gauge it confirms that a threaded component meets the minimum assembly dimensions for M22 x 2 mm. Which standard and tolerance does this gauge follow? This inspection ring is manufactured to DIN 13 with a tolerance class of 6g, matching common specifications for metric ISO fine threads. Is the gauge suitable for right-hand threads only? Yes, the supplied ring is a right-hand gauge designed specifically for right-hand metric ISO fine threads of M22 x 2 mm. What material is the gauge made from and how durable is it? The gauge is made from hardened gauge steel, offering good wear resistance and dimensional stability for routine inspection work. How should the ring be used to avoid damage? Engage the ring by hand with light, steady torque until full engagement; avoid forcing the gauge and store it dry and protected to prolong service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22x1 Limit Plug Gauge For Metric ISO Fine Thread, Right Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Product data inconsistency detected: contradictory quality status in the dataset. This issue may arise due to discrepancies in data entry, system errors, or conflicting updates from multiple sources. It is essential to thoroughly review the product information to ensure accuracy and consistency across all relevant fields. Please verify the product details, including quality status, specifications, and any associated metadata, before proceeding with publication. Addressing these inconsistencies promptly will help maintain data integrity, prevent potential errors, and ensure reliable information is presented to users or stakeholders. Accurate verification is crucial to uphold trust and meet quality standards effectively.
M22x1 Thread Gauge Ring Go Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Consistent acceptance checks and long service life make this gauge an effective choice: the combination of a go ring format with DIN 13, 6g tolerance and hardened gauge steel reduces rework and speeds inline inspection. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M22 x 1 mm (Go) — DIN 13, 6g | Metav IndustryLine A thread ring gauge M22 x 1 mm for right‑hand metric ISO fine threads, intended for rapid go/no‑go verification in production and inspection environments Go ring for M22 x 1 metric fine thread Hardened gauge steel for long service life Tolerance class DIN 13, 6g for reliable fits Rapid acceptance testing that keeps production moving A go ring in the form of a thread gauge provides immediate pass/fail results for external threads: if a threaded component screws into the M22 x 1 ring, the part meets the defined acceptance limits. The clear outcome shortens inspection cycles and lowers throughput time, delivering a measurable efficiency gain on the shop floor. Reliance on the standardised DIN 13, 6g tolerance ensures compatibility with established metric ISO fine‑thread parts, so assemblies maintain interchangeability and serviceability. Durable construction for repeatable results Manufactured from hardened gauge steel, the ring is designed to withstand frequent use without rapid wear, maintaining its functional dimensions over extended production runs. The compact mass (approx. 0.25 kg) keeps handling straightforward during repetitive checks and reduces operator fatigue while preserving dimensional stability. Robust material selection and conventional heat treatment translate into fewer replacements and a lower total cost of ownership for inspection equipment. Designed to integrate with standard inspection routines The ring is configured for right‑hand metric fine threads and suits routine checks in machining, assembly and maintenance contexts where fast, unambiguous decisions are required. The compact inspection ring fits into existing gaugesets and inspection benches, supporting traceable quality workflows and straightforward documentation. Identifying parts by SKU and GTIN facilitates inventory and quality records without ambiguity. Contact Metav Werkzeuge today to specify the appropriate Metav IndustryLine thread gauges for the application and to place an order; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.122.4 GTIN: 4054469124346 Description: Thread ring gauge M22 x 1 mm, go, right‑hand Material: hardened gauge steel Norm: DIN 13, 6g Facts Thread size: M22 x 1 mm Tolerance class: 6g Hand: right‑hand Weight: 0.25 kg Tariff number: 90173000 Special features Go gauge for quick acceptance testing Metric ISO fine thread compatibility Hardened construction for wear resistance Category: Gauges; Measuring pins FAQ What does "go" ring mean for thread inspection? A "go" ring verifies that an external threaded part is within the upper and lower limits for acceptance; the component must engage the ring to be regarded as acceptable for the specified tolerance. Which thread form and size are covered? The ring checks a metric ISO fine thread in size M22 x 1 mm, configured for right‑hand threads. Which standard and tolerance class apply? Compliance is with DIN 13 and tolerance 6g, matching common specifications for metric external threads. What material is the gauge made from? The ring is made from hardened gauge steel, selected to preserve dimensional stability and resist wear during repeated inspection cycles. How is the product identified for ordering? The item is listed as SKU M315.122.4 and GTIN 4054469124346 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22x1 Thread Go Ring For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of DIN 13, 6g accuracy and hardened gauge steel for dependable verification of M22 × 1 metric fine threads; the lightweight construction (0.18 kg) makes handling and storage straightforward. Order the M22 × 1 thread ring gauge via Metav Werkzeuge or consult our specialists for application-specific advice. Thread ring gauge M22 × 1 mm — Metric ISO fine thread, DIN 13 (Right-hand) Thread ring gauge M22 × 1 mm is a right-hand verification gauge for external metric ISO fine threads used in production control and incoming inspection DIN 13, tolerance class 6g Hardened gauge steel for long service life For verification of metric ISO fine threads Lightweight 0.18 kg for easy handling Precise inspection that safeguards interchangeability This verification ring is designed for objective assessment of external threads and ensures part interchangeability by checking conformity to metric ISO fine thread specifications. Made to DIN 13 with tolerance class 6g, the gauge provides a verifiable reference that simplifies quality control decisions and reduces rework. Using a hardened gauge produced for inspection tasks lowers the risk of measurement drift and supports consistent production tolerances, which in turn streamlines downstream assembly operations. Durable construction for repetitive use in workshop and shop floor Manufactured from hardened gauge steel, the ring resists wear from frequent engagement with workpieces, extending service intervals and reducing lifecycle costs. The compact mass (0.18 kg) and robust material choice make the tool suitable for repetitive checks at the machine station or inspection bench without introducing handling fatigue. The product’s design focuses on repeatability and ease of handling so that routine thread verification becomes a fast, reliable step in the production workflow. Practical fit for quality assurance workflows Integrating this verification gauge into a production or incoming‑inspection routine supports documented quality procedures and traceable outcomes. As a dedicated ring for M22 × 1 threads, it removes ambiguity during pass/fail assessment and helps maintain consistent acceptance criteria across shifts. The simple, standardised specification — right-hand metric ISO fine thread, M22 × 1, 6g — is recognised across engineering and inspection teams, which aids communication between suppliers and buyers and reduces nonconformity disputes. Contact Metav Werkzeuge in Emmerich to discuss suitability for specific parts and secure this Metav IndustryLine thread ring gauge for reliable thread inspection Technical data Article number: M315.222.4 GTIN: 4054469126005 Mass: M22 × 1 Material: Gauge steel, hardened Standard: DIN 13, 6g Weight: 0.18 kg Facts Thread nominal size: M22 Thread pitch: 1 mm Tolerance class: 6g Tariff code: 90173000 Special features Right-hand metric ISO fine thread verification Designed for external thread inspection Hardened for wear resistance Category: Gauges / inspection rings Suitable for routine production and incoming inspection FAQ What is this gauge used to check? The thread ring gauge M22 × 1 mm is used to verify external metric ISO fine threads to DIN 13, confirming that male threads meet the specified 6g tolerance. Is the gauge suitable for production use? Yes, the Metav IndustryLine ring gauge is manufactured from hardened gauge steel for repetitive production checks and designed to withstand regular use on the shop floor. Which thread specification does it accept? This verification ring accepts M22 × 1 external threads manufactured to metric ISO fine thread dimensions with tolerance class 6g as defined by DIN 13. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22x1.5 Limit Thread Gauge Right-Hand Metric ISO Fine Pitch, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
The product data cannot be processed into a reliable description because the quality indicators in the source file are contradictory: the item is simultaneously flagged as scrap and as acceptable. This inconsistency prevents a verified technical and commercial presentation and could lead to incorrect or misleading information being published. Please review the original data and correct the conflicting quality status so that a proper product description can be generated. If clarification is required or additional documentation (for example certificates, material confirmation or production batch details) is available, please provide it to ensure accuracy. For assistance with the data check or to submit corrected information, contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930.
M22x1.5 Thread Ring Gauge, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a compact, DIN 13 6g-compliant check with hardened construction and a lightweight 0.25 kg design for reliable, repeatable shop-floor verification; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M22 x 1.5 mm (go) — Metav IndustryLine — hardened gauge steel, DIN 13 tolerance Thread ring gauge M22 x 1.5 mm (go) is a purpose-built inspection tool for verifying external metric ISO fine threads in production and incoming‑goods checks Go gauge for M22 x 1.5 threads DIN 13 tolerance 6g Hardened gauge steel construction Right-hand metric ISO fine thread Fast pass/fail checks that keep production moving A dedicated go gauge provides an immediate binary result for threaded parts: a pass confirms dimensional acceptability, allowing continued processing without delay. The M22 x 1.5 geometry, matched to metric ISO fine thread standards, reduces decision time during incoming inspection and on the shop floor. Using a go-only ring simplifies workflows in high-throughput environments, as the tool performs a conclusive functional test rather than a time-consuming dimensional analysis. The result is improved throughput and fewer false rejections in routine quality control. Robust construction for long service life Manufactured from hardened gauge steel, the ring resists wear and maintains its measuring edge under frequent use. The hardened material and precise machining ensure repeatability over extended cycles, which lowers the need for premature replacement and preserves measurement integrity. At 0.25 kg the gauge balances solidity with easy handling; the compact mass supports rapid handling during sample checks without compromising stability. These attributes combine to deliver dependable performance in everyday industrial environments. Clear conformity to standards for audit and traceability Built to DIN 13 with 6g tolerance, the instrument aligns with recognised inspection criteria for metric threads. This conformity simplifies documentation for quality systems and audit trails: the standard designation signals that the ring is manufactured to established limits, supporting traceable acceptance procedures. As a dedicated right-hand metric ring gauge, it explicitly matches part orientation, avoiding ambiguity when validating screw or shaft threads intended for conventional threading directions. Practical application and handling guidance Ideal for machine shops, assembly lines and incoming‑goods inspections, the gauge offers a compact solution for rapid thread verification. Its single-purpose design concentrates on fast decisions rather than complex measurement readouts, making it suitable where throughput and functional assurance matter most. For parts that require full dimensional proof, pair the ring with complementary measuring methods; for routine conformity checks, the gauge alone provides an efficient, low‑complexity control step that integrates easily into existing inspection routines. For reliable thread verification and expert procurement from Metav Werkzeuge, request product guidance or place an order directly with our team in Emmerich — Metav IndustryLine stock and advice ensure fast delivery and application support Technical data Article number: M315.122.6 SKU: M315.122.6 GTIN: 4054469124353 Weight: 0.25 kg Size: M22 x 1.5 Facts Pitch: 1.5 mm Nominal diameter: 22 mm Standard: DIN 13 Tolerance: 6g Special features Material: hardened gauge steel Type: go (acceptance) ring gauge Thread direction: right-hand Application: metric ISO fine thread verification FAQ What is the purpose of a go ring gauge? A go ring gauge provides a quick functional check to confirm that an external thread fits within specified limits; the thread ring gauge M22 x 1.5 mm (go) verifies that a part can be assembled without further dimensional inspection. Does this gauge comply with recognised standards? Yes — the ring is manufactured to DIN 13 with a 6g tolerance, ensuring compatibility with standard inspection criteria for metric ISO fine threads. Which material is used for the ring and why? The tool is made from hardened gauge steel to resist wear and preserve repeatability during frequent checks, which extends service life in production settings. Can the gauge be used for left-hand threads? No — this instrument is specified for right-hand threads; left-hand threads require a corresponding left-hand gauge of the correct size and tolerance. Is the ring suitable for shop-floor use in assembly and incoming inspection? Yes — the compact go gauge design and robust construction make it well suited for rapid checks during incoming‑goods inspection and assembly verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22x2 Thread Go Gauge Metric ISO Fine Right-Handed Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of proven measuring practice by combining DIN 13 conformity, 6g tolerance class and hardened construction for reliable in‑line inspection; order the ring gauge directly via Metav Werkzeuge or consult our specialists for process integration. M22×2 Thread Ring Gauge (No‑Go) — DIN 13, 6g by Metav IndustryLine A M22×2 thread ring gauge for right‑hand metric ISO fine threads, designed as a no‑go (reject) ring for fast go/no‑go checks in production and quality control DIN 13 tolerance class 6g Hardened gauge steel construction Designed for M22 x 2 metric fine threads Right‑hand no‑go ring for production control Fast, objective pass/fail inspection for threaded parts A dedicated no‑go ring such as this is the quickest way to separate conforming from non‑conforming parts during assembly or incoming inspection. Built to DIN 13 with 6g tolerance, the ring provides a clear, unambiguous criterion: if the ring engages, the thread falls outside the allowed tolerance and the component is rejected. This method reduces subjective judgement, accelerates throughput on the shop floor and simplifies operator training, making production control both reproducible and defensible in audits. Durable material and geometry for consistent results Manufactured from hardened gauge steel, the ring resists wear and maintains thread form over many cycles, ensuring repeatable measurements and a long service life. The hardening process stabilises the surface against abrasion from frequent screw‑in checks, so maintenance intervals are extended and replacement costs are reduced. The compact mass of roughly 0.18 kg keeps handling straightforward while still offering the stiffness required for precise inspection of fine threads. Practical fitment for metric ISO fine threads Designed specifically for M22×2 metric ISO fine threads and produced as a right‑hand no‑go ring, this gauge matches the nominal geometry engineers expect when applying DIN standards. The clear go/no‑go principle avoids time‑consuming measurement routines where a simple functional check suffices. For traceability and stock control the item is listed under SKU M315.222.7 and carries a GTIN for easy integration into parts databases and inspection logs. How the no‑go ring improves quality workflows Integrating a purpose‑made ring gauge into inspection stations reduces decision latency: a single screw‑in action gives an immediate result, enabling faster sorting and fewer downstream defects. As a tactile, standards‑based tool the gauge supports compliance audits and can be paired with organisational procedures to document inspection frequency and outcomes. Its straightforward use lowers the barrier for temporary staff while helping maintain consistent quality across shifts. Choose the Metav IndustryLine M22×2 no‑go ring for dependable thread inspection — contact Metav Werkzeuge for advice on deployment or to secure this gauge for your quality control process: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M315.222.7 GTIN: 4054469126029 Net weight: 0.18 kg Material: hardened gauge steel Standard: DIN 13, 6g Facts Thread size: M22 × 2 Tolerance class: 6g Tariff code: 90173000 Special features Right‑hand thread design No‑go (reject) ring for metric ISO fine threads Category: thread ring gauge Intended use: production and incoming inspection FAQ What does a no‑go ring indicate in practice? A no‑go ring indicates that a threaded part exceeds the upper tolerance limit; when the ring engages on the thread the part does not meet the DIN 13 6g requirement and should be rejected. Can the M22×2 ring be used on coated or plated parts? Coatings can affect fit; for coated parts the M22×2 no‑go ring may register differently. Where coating thickness is significant, allow for the coating in the acceptance criteria or use dedicated gauging procedures. How should the ring be used to avoid damage and wear? Screw the ring by hand onto the part without forcing; avoid impact and remove debris before checking to preserve the hardened gauge steel surface and maintain long‑term accuracy. Is this gauge traceable for quality documentation? The ring is supplied with identifying data (SKU M315.222.7 and GTIN), suitable for inventory and inspection records; further traceable calibration services can be organised as required by company procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22x2 Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of DIN 13 6H conformity, hardened gauge steel construction and compact handling for fast, reproducible thread inspection. Order the limit plug gauge directly via Metav Werkzeuge or ask our consultants for application advice. Go/No-Go Thread Plug Gauge M22 × 2 mm — Metric ISO fine thread, right-hand | Metav IndustryLine Go/No-Go thread plug gauge M22 × 2 mm for quick verification of metric ISO fine threads in production and inspection environments Hardened gauge steel for long service life Manufactured to DIN 13, tolerance 6H For M22 × 2 mm metric ISO fine thread Right-hand thread — Go/No-Go checking Fast pass/fail control that keeps production moving A limit plug gauge provides an immediate, binary result that removes ambiguity from routine checks. The M22×2 mm size matches common fine-thread applications and permits rapid verification at the machine, in the assembly area or at the inspection bench. Because the gauge is made from hardened gauge steel, wear resistance is high and repeatability across many checks is ensured, which reduces scrap and rework. The simple mechanical design requires no power or setup, making the tool a pragmatic addition to existing quality routines. Conformity to recognised standards for assured accuracy Compliance with DIN 13, 6H gives a clear reference for tolerance and fit, enabling straightforward documentation of thread conformity in audits and incoming inspections. The dual-sided Go/No-Go function separates acceptable threads from rejects without interpretation, which supports faster decision-making and consistent quality across shifts. Using a dedicated master gauge for thread control streamlines process capability assessments and complements measurement data from gauges or microscopes used elsewhere in the workshop. Durable construction for continuous workshop use Engineered for repeat use in industrial environments, the gauge’s hardened body maintains its form and accuracy under regular handling. The compact format and low mass aid ergonomic use during spot checks, while the robust material resists deformation that could otherwise falsify results. As a precision gauge, it is designed to be used as part of a calibrated toolset and to integrate with standard inspection workflows, offering a reliable mechanical reference where high throughput and consistent outcomes are required. Choose the Metav IndustryLine M22×2 limit plug gauge for dependable thread control — contact Metav Werkzeuge for tailored recommendations and prompt supply from our Emmerich quality hub. Technical Data Article number: M315.022.7 GTIN: 4054469122694 Thread size: M22 × 2 mm Standard: DIN 13, 6H Facts Nominal diameter: 22 mm Pitch: 2 mm Weight: 0.2 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Thread direction: right-hand Function: limit plug gauge (Go/No-Go) Category: Plug gauge / Master gauge FAQ What is this gauge used for? The Go/No-Go thread plug gauge M22 × 2 mm is used for quick pass/fail checking of metric ISO fine threads in production and inspection processes. Which standard does the gauge follow? The limit plug gauge is manufactured to DIN 13 with tolerance class 6H, ensuring clear conformity criteria for thread acceptance. What material is the gauge made from? The gauge is made from hardened gauge steel, providing wear resistance and long-term dimensional stability for repeated checks. Is this a right-hand or left-hand thread gauge? This version is a right-hand thread gauge designed specifically for standard metric ISO fine threads with M22 × 2 mm geometry. Can this gauge replace instrument-based thread measurement? The plug gauge offers fast, tactile Go/No-Go verification; it is complementary to instrument-based measurement for detailed dimensional data rather than a direct replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22x2.5 Thread Gauge Ring Right-Hand ISO Metric, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a compact inspection tool that combines DIN 13 (6g) conformity, robust hardened gauge steel construction and a precise M22 x 2.5 mm thread form for reliable pass/fail checks in series production. Order the gauge via Metav Werkzeuge or consult the team for integration advice. Thread ring gauge M22 x 2.5 mm — hardened gauge steel, DIN 13 (6g) | Metav IndustryLine The Thread ring gauge M22 x 2.5 mm is a precision inspection ring for verifying right‑hand ISO metric external threads in workshop and production environments. Hardened gauge steel construction DIN 13 tolerance class 6g For right‑hand ISO metric external threads Compact, workshop‑ready format Reliable conformity control for threaded parts The ring provides a quick, reproducible check of external threads against the DIN 13 specification. Used as part of a metrological control plan, the gauge confirms whether a threaded component meets the nominal form and tolerance of the M22 x 2.5 mm ISO metric series with the industry‑standard 6g tolerance band. This reduces ambiguity in acceptance decisions and shortens inspection times on the production line, turning complex geometry into a straightforward go/no‑go result for the workflow. Built for durability and repeatability Manufactured from hardened gauge steel, the ring is designed to withstand repeated engagement without rapid wear, maintaining measurement reliability over many cycles. The choice of material ensures stable contact geometry and abrasion resistance, which is essential when checking batch parts or samples from continuous machining processes. As a result, maintenance intervals are extended and the inspection routine stays predictable — a concrete benefit for quality teams seeking low‑effort traceability. Practical application in production and inspection The gauge is intended for checking external threads produced to the ISO metric profile; its right‑hand orientation matches standard production outputs. In practice, the ring is used on finished components to verify conformity before assembly or shipment. Integration into a quality workflow is straightforward: the gauge complements visual and dimensional checks, supports faster sampling plans and serves as a definitive reference for pass/fail decisions in the workshop or inspection bay. Consult Metav Werkzeuge for application advice and to arrange supply of this Metav IndustryLine ring gauge to support consistent thread inspection at your site. Technical data Article number: M315.222 GTIN: 4054469125992 ECLASS: 21170214 Manufacturer: Metav IndustryLine Facts Thread size: M22 x 2.5 Tolerance: DIN 13, 6g Tariff code: 90173000 Material and features Material: hardened gauge steel Thread type: ISO metric external thread, right‑hand Category: Gauges — thread ring FAQ What size and thread form does this ring gauge check? The Thread ring gauge M22 x 2.5 mm checks external ISO metric threads of nominal size M22 x 2.5 and is intended for right‑hand threads. Which tolerance class is represented by the gauge? The ring gauge conforms to DIN 13 with the 6g tolerance class, providing compatibility with standard ISO metric production tolerances. Is the ring gauge suitable for serial production inspection? Yes, the hardened gauge steel construction makes the ring suitable for repeated checks in serial production and routine quality control tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22x2.5 Thread Go Gauge For Metric ISO Threads, Right-Hand, Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
Take advantage of the combination of standard‑compliant verification, robust hardened gauge steel and compact handling for reliable, repeatable thread inspection in production. Order the gauge directly via Metav Werkzeuge or consult our specialists for integration advice. M22 × 2.5 Go Thread Ring Gauge — Metric ISO, DIN 13, 6g (Metav IndustryLine) A M22 × 2.5 Go Thread Ring Gauge designed for quick, repeatable verification of metric ISO external threads in production and quality control settings Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M22 × 2.5 metric ISO threads Right‑hand thread checking Rapid, unambiguous verification to speed up inspection The Go ring provides an immediate pass/fail result, enabling efficient inline checks without lengthy measurement routines. Built from hardened gauge steel, the ring resists wear under repetitive use and maintains dimensional stability, which reduces downtime for replacement and limits drift in acceptance criteria. Compliance with DIN 13 ensures compatibility with standard metric components, so the inspection process becomes a reliable step in production control rather than a bottleneck. Clear tolerance alignment for standard metric threads The ring is manufactured to the 6g tolerance band specified in DIN 13, which corresponds to the widespread ISO metric thread tolerance for many external threaded parts. This tolerance class offers a pragmatic balance between manufacturability and fit, making the gauge suitable for routine quality control in machine shops and assembly lines. As a right‑hand thread verifier, the gauge integrates directly into workflows for common fasteners and fittings, ensuring consistent acceptance criteria across batches. Robust build and workshop practicality for long service life Weighing just 0.3 kg and finished from hardened measuring steel, the gauge combines durability with easy handling on the shop floor. The compact mass supports fast manual checks and simple storage, while the hardened surface extends service intervals compared with untreated gauges. By using a dedicated ring for the nominal M22 × 2.5 size, the inspection step becomes faster and less error‑prone than relying on visual or ad‑hoc methods, reducing rework and improving overall process reliability. For dependable, standards‑based thread inspection choose the Metav IndustryLine M22 × 2.5 Go thread ring gauge and contact Metav Werkzeuge for product availability and expert advice on using the gauge in production routines Technical data SKU: M315.122 GTIN: 4054469124339 Weight: 0.3 kg Size: M22 × 2.5 Material: Gauge steel, hardened Standard: DIN 13, 6g Right‑hand thread Numbers / Core technical data Nominal size: 22 mm Pitch: 2.5 mm Tolerance class: 6g Weight: 0.3 kg Tariff number: 90173000 Special features Go gauge (good) for pass verification For metric ISO external threads Hardened gauge steel for wear resistance Compact and workshop‑friendly design Category: Gauges / Inspection tools FAQ What is the intended use of this gauge? The M22 × 2.5 Go thread ring gauge is intended for fast pass/fail verification of M22 × 2.5 metric ISO external threads during production and incoming inspection. Which standard and tolerance does the gauge follow? Manufactured to DIN 13 with tolerance 6g, the ring gauge ensures conformity with common ISO metric thread specifications for external threads. Is the gauge suitable for right‑hand threads only? Yes, this ring gauge is made for right‑hand metric ISO threads and is intended to verify external threads to the M22 × 2.5 nominal and 6g tolerance. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, which provides high wear resistance and dimensional stability so that the verification result remains reliable over many inspection cycles. How does the gauge improve inspection workflow? Using a dedicated Go ring reduces the time needed for acceptance checks by providing an immediate go/no‑go result for the specified size, which streamlines quality control and lowers the risk of rework. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22x2.5 Thread Limit Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a compact, standards-compliant plug gauge that combines DIN 13 conformity with hardened gauge steel for durable thread verification; order directly via Metav Werkzeuge or consult our specialists for seamless integration into quality control. Limit thread plug gauge M22 x 2.5 — right-hand metric ISO gauge (Metav IndustryLine) A Limit thread plug gauge M22 x 2.5 for quick Go/No‑Go verification of metric ISO standard threads in production, inspection and incoming goods control Precision to DIN 13, tolerance 6H Hardened gauge steel for long service life Right-hand metric M22 × 2.5 thread Lightweight 0.29 kg for easy handling Rapid, reliable thread checks for production and inspection The limit thread plug gauge is a purpose-made tool for fast verification of ISO metric threads, enabling concise Go/No‑Go decisions on the shop floor. With the M22 x 2.5 dimension specified to DIN 13 and tolerance 6H, the gauge provides a clear pass/fail result without interpretation, which accelerates throughput and reduces rework. The compact design and low mass make the tool suitable for repetitive checks at assembly stations and incoming‑goods inspection, maintaining consistent cycle times and reducing measurement-induced bottlenecks. Built for durability and straightforward handling Manufactured from hardened gauge steel, the plug gauge resists wear in frequent use, extending service life and preserving the Go/No‑Go boundary. The modest weight of 0.29 kg contributes to ergonomic handling during repetitive inspection tasks, lowering operator fatigue and improving reproducibility. The right‑hand thread form is machined precisely to reproduce the functional envelope of mating parts, so the gauge can be relied upon for routine quality assurance without frequent replacement. Conformance and integration into quality routines Designed for metric ISO standard threads, the gauge supports standardised inspection procedures and documentation within quality management systems. Its clear specification—M22 x 2.5, DIN 13, 6H—facilitates traceable records and ensures compatibility with existing inspection plans. For operations seeking consistent results, this tool is a straightforward component in a calibrated inspection workflow and complements organisational efforts to maintain measurable process capability. For expert advice on integrating this Metav IndustryLine thread gauge into inspection routines, contact Metav Werkzeuge for immediate guidance and supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M315.022 GTIN: 4054469122663 Weight: 0.29 kg Material: Gauge steel, hardened Thread: M22 x 2.5 Standard: DIN 13, 6H Tariff number: 90173000 Facts Thread size: M22 x 2.5 (metric) Tolerance class: 6H Right-hand thread Condition: Good Special features Purpose: Limit thread plug gauge for Go/No‑Go inspection Category: Gauges Subcategory: Measuring pins Durable surface from hardened gauge steel Suitable for production and incoming‑goods inspection FAQ What does a limit thread plug gauge check? The limit thread plug gauge checks whether a metric ISO thread falls within the acceptable Go or No‑Go envelope; the M22 x 2.5 gauge gives an immediate pass/fail result. Is this gauge suitable for routine shop‑floor inspection? Yes, the Metav IndustryLine plug gauge is designed for frequent use in production and incoming‑goods checks, combining hardened material and a compact weight for ergonomic handling. Which standard does the gauge comply with? The gauge is manufactured to DIN 13 with tolerance class 6H, ensuring compatibility with standardised inspection procedures for metric ISO threads. Can the gauge be used for left‑hand threads? This specific item is a right‑hand metric plug gauge; left‑hand variants must be ordered separately if required. What is the SKU for ordering or documentation? The SKU for this limit thread plug gauge is M315.022 and the GTIN is 4054469122663. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M22×1.5 Thread Ring Gauge Go Gauge Right-Hand DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
This go/no‑go ring combines hardened gauge steel, a DIN 13 tolerance class 6g and the M22 × 1.5 fine‑thread size for fast, repeatable verification of metric ISO threads. For straightforward procurement or technical guidance, order the gauge directly via Metav Werkzeuge or consult our specialists for application support. Thread gauge ring M22 x 1.5 mm – Go/No‑Go, hardened gauge steel (Metav IndustryLine) A thread gauge ring M22 x 1.5 mm designed as a right‑hand go/no‑go checker for metric ISO fine threads in workshop and quality‑control environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Right‑hand M22 × 1.5 verification Fast, standards‑based acceptance decisions for production The ring is engineered for rapid in‑line or bench inspection, enabling clear accept/reject outcomes within seconds. Made from hardened gauge steel, the tool maintains dimensional stability under repeated use and resists wear that would otherwise blur acceptance limits. Compliance with DIN 13 and the 6g tolerance class provides a traceable reference to recognised thread standards, which simplifies integration into documented quality routines and supports consistent process decisions. Reliable geometry and material for reproducible checks A compact gauge geometry and hardened material reduce the risk of deformation during handling, which preserves the go/no‑go decision boundary over many cycles. The ring’s M22 × 1.5 designation fits metric ISO fine threads, ensuring compatibility with common engineering fasteners and assemblies. By using a dedicated thread ring rather than comparative methods, inspection is converted into an objective, repeatable operation that shortens inspection time and reduces operator uncertainty. Practical role in quality workflows and documentation The gauge is suitable for routine acceptance testing of threaded parts, sample checks in serial production and final inspection of assemblies where thread fit is critical. When documented in inspection plans, the ring provides an immediate physical statement: either the part fulfils the 6g fit, or it does not. This simple binary outcome streamlines reporting and supports corrective action without elaborate measurement steps, making it especially valuable for production lines and incoming‑goods control. Contact Metav Werkzeuge today to request the Metav IndustryLine M22 × 1.5 thread gauge ring or to discuss suitability for specific thread inspection routines Technical Data Article number: M315.222.6 GTIN: 4054469126012 Weight: 0.18 kg Facts Thread size: M22 × 1.5 Standard: DIN 13, 6g Tariff number: 90173000 Special features Material: gauge steel, hardened Design: go/no‑go (acceptance/rejection) Thread direction: right‑hand Category: thread gauge ring / inspection gauge FAQ What is the primary use of this thread gauge ring? The thread gauge ring is used for quick go/no‑go verification of M22 × 1.5 metric ISO fine threads; the Metav IndustryLine gauge provides a clear acceptance or rejection result according to DIN 13, tolerance 6g. Is the gauge suitable for serial production control? Yes, the hardened construction and go/no‑go design make the M22 × 1.5 ring appropriate for routine sample testing and inline quality checks in serial production. Which thread direction does the ring check? This ring is manufactured for right‑hand threads and is intended to verify right‑hand metric ISO fine threads. How does the DIN 13, 6g classification affect inspection? The DIN 13, 6g classification defines the fit and tolerance band that the gauge checks against; parts passing the go gauge and failing the no‑go confirm conformity to that tolerance class. Can the gauge be used as a reference in inspection reports? Yes, the Metav IndustryLine thread gauge ring can be cited in inspection documentation as the physical acceptance standard used for pass/fail evaluation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M24 x 3 Thread Go Gauge Right-Hand ISO Metric Thread, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of uncompromising inspection reliability and robust construction to keep production rejects measurable and controllable; the hardened gauge steel body and conformity with DIN 13, 6g ensure repeatable assessment of metric ISO threads. Order the thread ring gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Thread ring gauge M24 × 3 mm — No‑go gauge, DIN 13 / 6g (Metav IndustryLine) The thread ring gauge M24 × 3 mm (no‑go) is a hardened, right‑hand ring gauge for the inspection of metric ISO standard threads in production and incoming goods control. No‑go ring gauge M24 × 3 mm Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Right‑hand metric ISO thread Guaranteed rejection control with standardised tolerances The no‑go ring is designed for clear, objective inspection of external threads: a part that passes the no‑go check is out of tolerance and must be rejected or reworked. Manufactured from hardened gauge steel, the tool provides stable contact geometry and wear resistance that preserve the gauge profile over many inspection cycles. Conformance to DIN 13 and the 6g tolerance class gives a traceable, industry‑standard basis for acceptance criteria, supporting consistent decisions at the workshop or inspection bench. The robust construction translates into lower measurement uncertainty and less frequent requalification. Improve throughput and reduce rework with rapid pass/fail checks Integrating this ring gauge into a routine inspection process delivers a fast, rational method to separate compliant from non‑compliant parts. The physical go/no‑go check replaces time‑consuming measurement routines for this dimension, helping to speed up incoming goods checks and line sampling. The clear mechanical decision—either the gauge fits or it does not—reduces subjectivity and enables the quality team to focus on corrective action rather than measurement debate. Where traceability is required, the standardised tolerance class supports documentation and audit trails. Compact design for workshop handling and durability Engineered for repetitive use, the ring exhibits a compact, ergonomic profile that suits bench work and quick checks on the shop floor. The right‑hand metric ISO thread form matches standard M24 × 3 external threads, ensuring direct applicability without adaptation. As a hardened tool, it withstands the mechanical stresses of frequent engagement, maintaining the critical profile geometry. For stock and process planning, the gauge is supplied under the Metav IndustryLine label, reflecting Metav’s role as a precision partner with a wide range of metrology products and dependable supply from Emmerich. Contact Metav Werkzeuge for a suitability check or to request further specification details for this Metav IndustryLine no‑go thread ring gauge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: M315.224 GTIN: 4054469126036 Norm: DIN 13, 6g Size: M24 × 3 Material: hardened gauge steel Right‑hand metric ISO thread Core figures ECLASS: 21170214 Tariff code: 90173000 Label weight indication: 0.19 kg Special features No‑go function for rejection testing Category: Gauges / Ring gauges Intended for metric ISO standard threads Image assets available for reference FAQ What is the intended use of this ring gauge? The ring gauge is intended as a no‑go inspection tool for M24 × 3 external threads; it provides a mechanical pass/fail result for metric ISO threads in production and incoming inspection. Which standards does the gauge comply with? This Metav IndustryLine ring gauge is manufactured to DIN 13 and the 6g tolerance class, providing a recognised standard for thread acceptance criteria. What material is the gauge made from and why does it matter? The body is made from hardened gauge steel, chosen for profile stability and wear resistance so the gauge maintains its form under repeated use. Is this a right‑hand or left‑hand thread gauge? The tool is for right‑hand metric ISO threads, matching standard M24 × 3 external threads. Can this gauge replace measurement with a micrometer or caliper? The ring gauge offers a direct go/no‑go decision and is not a substitute for dimensional measuring instruments where a numerical value is required; it is a rapid pass/fail control method complementary to metrological measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M24x1 Go/No-Go Thread Ring Gauge ISO Metric Fine Thread Right-Hand DIN 13, 6g - Metav IndustryLine
Take advantage of a hardened gauge‑steel design and conformity to DIN 13, 6g to secure consistent thread inspection and reduced rework in production. Order the gauge directly via Metav Werkzeuge or consult the team for batch verification and process integration. Thread ring gauge M24 x 1 mm (DIN 13, 6g) — Metav IndustryLine A Thread ring gauge M24 x 1 mm designed for rapid verification of right‑hand metric ISO fine threads in production, inspection and incoming goods control. Metric ISO fine thread M24 × 1 mm Tolerance class DIN 13, 6g Hardened gauge steel construction Right‑hand thread inspection Built for dependable thread verification The ring gauge is produced from hardened gauge steel, delivering wear resistance and dimensional stability that support repeated checking in a busy metrology environment. As a dedicated inspection tool for M24 × 1 mm metric fine threads, the device reduces uncertainty at the control stage and shortens decision cycles on accept/reject criteria. The robust construction and compact mass of 0.19 kg make the gauge straightforward to handle on the shop floor while remaining resilient against everyday knocks and handling. Clear standards and measurable tolerances for reliable decisions Conformity to DIN 13 and tolerance class 6g provides a traceable basis for acceptance criteria and audit trails. The specification M24 × 1 mm denotes a 24 mm nominal diameter with a 1 mm pitch; the tolerance class indicates the permissible thread envelope for metric ISO fine threads. Using a purpose‑made inspection ring simplifies pass/fail checks and removes subjective judgement from threaded part acceptance. This objective approach supports consistent quality decisions and faster throughput in machining and assembly operations. Practical application in workshop and production workflows The gauge is intended for routine inspection of right‑hand metric threads during incoming goods inspection, in‑process control or final inspection. A dedicated ring like this integrates easily into a quality station, allowing technicians to confirm thread conformity without elaborate setup. Where inspection volumes are high, the repeatability of a hardened steel ring decreases downtime caused by uncertain measurements and supports leaner process control. The tool also complements dimensional reports and can be referenced on inspection certificates or route cards. Request batch verification or production advice from Metav Werkzeuge — quote article M315.224.4 (Thread ring gauge M24 × 1 mm) for fast supply from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.224.4 GTIN: 4054469126043 Label: Gewinde‑Lehrring M24 x 1 mm Aussch. DIN 13, f. metr. ISO‑Feingewinde, rechts Facts Nominal thread: M24 × 1 Pitch: 1 mm Weight: 0.19 kg Standard: DIN 13, 6g Tariff code: 90173000 Special features Material: hardened gauge steel Thread form: metric ISO fine thread, right‑hand ECLASS: 21170214 FAQ What thread size and pitch does this gauge verify? The gauge verifies an M24 nominal diameter with a 1 mm pitch; the product is manufactured as a dedicated inspection ring for metric ISO fine threads. Which tolerance class and standard apply to the inspection ring? The inspection ring conforms to DIN 13 and is made to tolerance class 6g, providing a standardised acceptance envelope for quality checks. Is the gauge suitable for production sampling and incoming inspection? Yes, the hardened steel ring is intended for routine checks in incoming goods, in‑process control and final inspection workflows. How durable is the material for repetitive shop‑floor use? Manufactured from hardened gauge steel, the ring offers high wear resistance and dimensional stability suitable for repeated pass/fail checks. Which article number should be quoted when ordering or referencing the tool? Please use article number M315.224.4 (GTIN 4054469126043) when specifying this thread ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M24x1 Limit Thread Plug Gauge ISO Fine Thread Right-Hand DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Product data inconsistency detected: the item is marked both as conforming and as rejected. This discrepancy indicates conflicting quality flags that need to be addressed to ensure accurate product classification. Please verify the source information thoroughly to identify the root cause of the inconsistency. Resolving this issue is essential before a reliable product description can be generated. Without clarification, the conflicting status may lead to errors in inventory management, customer communication, or quality assurance processes. Take immediate action to review all relevant data sources, confirm the item's actual status, and update the records accordingly to maintain system integrity and operational efficiency.
M24x1.5 GO/NO-GO Thread Limit Plug For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
The supplied product data contains inconsistent quality information that prevents a reliable product description from being generated. Specifically, the dataset indicates mutually contradictory quality statuses, so a definitive technical and commercial text cannot be produced without clarification. Please verify the source data and confirm the item's inspection status and release condition; once the contradictory entries are resolved, a full specification and customer-ready description can be created. If assistance is required to check or correct the dataset, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 for support in preparing accurate product information.
M24x1.5 Thread Go Gauge For Metric ISO Fine Thread Right-Handed Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of precise conformity to DIN 13 (6g) and a hardened gauge‑steel construction for consistent pass/fail decisions; the compact, 0.19 kg design simplifies handling and storage. Order this ring gauge directly via Metav Werkzeuge or contact our consultants for application advice and delivery options. Thread ring gauge M24 x 1.5 — hardened gauge‑steel, DIN 13 (6g) The Thread ring gauge M24 x 1.5 is a right‑hand ring gauge for rapid verification of metric ISO fine threads in production and inspection environments. DIN 13 tolerance class 6g Hardened gauge steel construction Right‑hand M24 x 1.5 metric thread Compact weight 0.19 kg for handling Accurate conformity for reliable go/no‑go decisions The ring gauge is produced to DIN 13 with tolerance class 6g, providing a clear, objective criterion for threaded part acceptance. Built for repetitive quality control, the gauge offers immediate binary evaluation that shortens inspection time and reduces interpretation errors. Where a formal sample plan requires consistent criteria, the defined tolerance band supplied by this gauge streamlines process control and supports traceable decisions on component conformity. Robust construction that limits wear and maintenance Manufactured from hardened gauge steel, the unit resists abrasion and maintains the reference profile over many inspection cycles, which reduces recalibration frequency and downtime. The modest mass of 0.19 kg makes the gauge easy to handle on the shop floor while the hardened finish preserves thread geometry against shop contaminants. These design choices mean fewer interruptions for replacement and a lower total cost of ownership in routine production monitoring. Fits into inspection routines and documentation processes The tool is configured for M24 x 1.5 right‑hand metric ISO fine threads and integrates naturally into first‑piece inspection benches or handheld verification workflows. Marked identification and a consistent build quality simplify inventory and audit tasks; where digital traceability is required, GTIN and SKU data are available in the technical section below for integration with asset lists. Backed by Metav IndustryLine supply and distribution, the gauge supports reliable replenishment and conservative stock planning in manufacturing operations. Discuss specific thread‑inspection needs with Metav Werkzeuge to ensure the gauge matches the intended application and to arrange delivery from Emmerich. Technical data Article number: M315.224.6 SKU: M315.224.6 GTIN: 4054469126050 Weight: 0.19 kg Thread: M24 x 1.5 Standard: DIN 13, 6g Brand: Metav IndustryLine Facts Tolerance class: 6g Right‑hand metric fine thread Customs tariff number: 90173000 Special features Material: gauge steel, hardened Category: Thread ring gauge / inspection gauge Intended use: verification of metric ISO fine threads FAQ What tolerance does this gauge follow? This ring gauge is manufactured to DIN 13 and marked tolerance class 6g, providing the reference for pass/fail evaluation of M24 x 1.5 metric threads. Is the gauge suitable for production use or only laboratory inspection? The hardened thread ring gauge M24 x 1.5 is designed for routine production inspection as well as final control, thanks to its wear‑resistant construction and compact handling. What material is used for the gauge and why does it matter? The gauge is made from hardened gauge steel, a material chosen for long‑term dimensional stability and resistance to wear during frequent use. How is the product identified for inventory and traceability? Identification is provided via SKU M315.224.6 and GTIN 4054469126050, which simplifies asset tracking and documentation in quality systems. Can this gauge be used for left‑hand threads? This specific unit is manufactured for right‑hand M24 x 1.5 metric fine threads; left‑hand variants require a corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M24x1.5 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of fast, unequivocal thread acceptance with this M24 x 1.5 go thread gauge ring, combining DIN‑compliant tolerance (6g) and hardened gauge steel for durable, repeatable checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Go thread gauge ring M24 x 1.5 — DIN‑compliant go gauge, hardened gauge steel (Metav IndustryLine) Go thread gauge ring M24 x 1.5 for rapid visual and tactile acceptance testing of metric ISO fine threads in production and incoming inspection Go ring for M24 x 1.5 metric fine threads Hardened gauge steel for stable measurement Manufactured to DIN 13, tolerance 6g Compact weight 0.21 kg for easy handling Rapid acceptance testing that reduces rework A go gauge ring provides an immediate pass/fail decision during thread inspection, eliminating guesswork and saving time on the shop floor. The ring is sized M24 x 1.5 and produced to DIN 13 with tolerance 6g, so it fits the specification for metric ISO fine threads and supports consistent acceptance criteria. Using a go ring like this streamlines routine checks of threaded parts, shortens inspection cycles and lowers the risk of downstream assembly problems caused by out‑of‑tolerance threads. Durable construction for long service life Made from hardened gauge steel, the ring resists wear and retains its form under frequent use, which maintains measurement integrity across many inspection cycles. The material choice and heat treatment minimise profile change and ensure that the gauge remains a reliable reference. At a practical weight of 0.21 kg, the gauge is easy to handle during rapid checks yet substantial enough to feel stable in use, helping to reduce handling variation and false rejects. Practical fit for production and quality control Engineered for repetitive use in workshops and quality departments, this ring is optimised for fast hand checks and routine inline inspection. The simple go/no‑go concept supports unambiguous decisions without complex setup, which helps production teams keep throughput high while meeting documented standards. The compact design and clear specification make this gauge suitable for both incoming inspection of purchased components and final checks before assembly. Standards, traceability and application notes Manufactured for conformance to DIN 13 and marked for its thread form, the gauge supports traceable inspection routines and quality records. The ring is intended for checking right‑hand metric ISO fine threads and is categorised as a go (acceptance) gauge. For situations requiring documented calibration, consult Metav Werkzeuge about applicable lab calibration options and traceability recommendations to integrate the gauge into an established quality system. Contact Metav Werkzeuge in Emmerich for specification matching, stock availability and application guidance — our consultants will advise on how this Metav IndustryLine gauge fits existing inspection routines Technical data Article number: M315.124.6 SKU: M315.124.6 GTIN: 4054469124391 Weight: 0.21 kg Thread size: M24 x 1.5 Standard: DIN 13, 6g Category: Gauges / Thread gauges Country of origin: see manufacturer details below Facts Nominal thread: M24 Pitch: 1.5 mm Tolerance class: 6g Tariff number: 90173000 Mass (weight): 0.21 kg Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Go (acceptance) ring design Suitable for production and incoming inspection FAQ What does "go" mean for this ring gauge? A go ring confirms that an external thread falls within the acceptable upper limits; the Go thread gauge ring M24 x 1.5 (Metav IndustryLine, SKU M315.124.6) fits correctly only when the tested thread meets the specified DIN 13 / 6g criteria. Can this gauge be used on non‑ISO threads? This ring is designed for metric ISO fine threads with a 1.5 mm pitch; it is not suitable for non‑ISO or imperial threads and should be used only on parts manufactured to the corresponding metric standard. How does the material affect inspection reliability? The hardened gauge steel construction minimises wear and dimensional drift during repetitive use, so the ring maintains its form and supports reliable, repeatable checks in production environments. Is the gauge suitable for production line checks? Yes, the compact go ring design supports fast hand checks and is particularly well suited to inline or spot inspections where quick pass/fail decisions are required. What documentation is provided with the gauge? The product is supplied with the manufacturer and product identifiers; ask Metav Werkzeuge about calibration certificates or supplementary traceability documents if required for quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M24x2 Go/No-Go Thread Plug Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Limit checks with a proven standard: hardened gauge steel, DIN 13 conformity and the M24 x 2 mm metric fine‑thread form a compact, wear‑resistant solution for rapid go/no‑go verification. Take advantage of fast inline control and long service life — order the limit thread plug gauge directly via Metav Werkzeuge or contact our consultants for technical guidance. Limit thread plug gauge M24 x 2 — right‑hand metric ISO fine thread, hardened The limit thread plug gauge M24 x 2 is a right‑hand metric ISO fine‑thread reference for fast pass/fail checks in production and inspection routines, designed for repeated use on the shop floor. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Right‑hand M24×2 metric fine thread Fast, standards‑based pass/fail control to reduce rework The limit plug acts as a straightforward go/no‑go gauge for threaded parts, enabling immediate decisions during assembly or incoming inspection. Compliance with DIN 13 and the 6H tolerance class provides an objective benchmark for thread acceptance, reducing subjective judgement and downstream rejects. Using a dedicated plug gauge shortens inspection time compared with full metrological checks, which helps maintain throughput while safeguarding assembly fit and functional reliability. Durable, low‑maintenance construction for long service life Manufactured from hardened gauge steel, the gauge resists wear and maintains profile integrity through repeated engagement, which preserves measurement reliability and minimises replacement frequency. The compact mass of 0.25 kg and solid construction ensure stable handling and low sensitivity to accidental knocks. Where repeated verification is required, the robust material choice translates into lower lifecycle costs and fewer interruptions to quality control routines. Simple integration into production and quality workflows The right‑hand M24 x 2 mm form fits metric ISO fine threads and is intended for quick station checks, assembly benches or incoming goods inspection. As a limit gauge it is ideal for rapid operator checks and tactile verification without requiring complex measurement equipment — this supports lean practices and keeps skilled metrology resources focused on critical tasks. Traceability is aided by the clear SKU and GTIN information supplied with the article, simplifying inventory and audit processes. For reliable thread control in production, request the Metav IndustryLine limit thread plug gauge via Metav Werkzeuge or speak with our consultants for application advice and procurement support Technical data Article number: M315.024.7 GTIN: 4054469122731 Weight: 0.25 kg Thread: M24 x 2 mm Manufacturer: Metav IndustryLine Norm: DIN 13, 6H Facts Thread pitch: 2 mm Mass: 0.25 kg Customs tariff number: 90173000 Special features Material: gauge steel, hardened Type: limit thread plug gauge (go/no‑go) Handedness: right‑hand Application: verification of metric ISO fine threads Category path: Gauges / Plug gauges FAQ What is the intended use of this limit thread plug gauge? The limit thread plug gauge M24 x 2 is intended for fast pass/fail verification of right‑hand metric ISO fine threads in production and inspection workflows. Does this gauge conform to an established standard? Yes, the gauge is manufactured to match DIN 13 with a 6H tolerance class for metric threads, enabling standardised acceptance criteria. What material is used and how does that affect durability? Constructed from hardened gauge steel, the limit plug gauge offers enhanced wear resistance and dimensional stability for repeated use in shop‑floor inspections. Can this gauge be used for both go and no‑go checks? The device is a limit plug gauge designed specifically for go/no‑go assessment of threaded components; it provides a quick go/no‑go decision without full dimensional reporting. Is the product traceable for inventory and audits? Yes, the item is supplied with a clear article number (M315.024.7) and GTIN (4054469122731) to support traceability and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M24×1 Thread Gauge Ring Plug Gauge Metric ISO Fine Right-Handed Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
The precise combination of a Go verification function, hardened gauge steel and conformity to DIN 13 (6g) makes this thread ring ideal for fast production checks and long service life. Order the gauge directly via Metav Werkzeuge or consult the team for application advice. Thread ring gauge M24 x 1 mm (Go) — Metric ISO fine thread, hardened gauge steel The Thread ring gauge M24 x 1 mm (Go) is a right‑hand, metric ISO fine‑thread inspection gauge designed for fast pass/fail verification in production and incoming‑goods inspection. Go ring for M24 x 1 metric fine threads Hardened gauge steel for durable use Manufactured to DIN 13 tolerance 6g Compact weight 0.13 kg for easy handling Rapid pass/fail inspection that keeps production moving The M24 x 1 go ring is built for quick, binary checks where speed and unambiguous results matter. As a go (acceptance) ring manufactured to DIN 13 with tolerance 6g, it confirms whether an external thread lies within the permitted limits; a free fit indicates compliance, a jam or failure to enter signals corrective action. This method reduces downtime in the production line by avoiding time‑consuming micrometric set‑ups for every part. The benefit is clear: faster throughput with reliable quality gates, supporting efficient process control and fewer non‑conforming deliveries. Durable construction and practical handling for workshop use Made from hardened gauge steel, the ring is engineered to withstand repeated use while preserving its reference form. Its compact mass of 0.13 kg makes it easy to manoeuvre at inspection benches or on the shop floor without compromising stiffness. The hardened material reduces wear and extends calibration intervals, which lowers total cost of ownership and minimises measurement uncertainty over time. For operators this means consistent, repeatable checks and fewer interruptions for tool replacement. Clear standards compliance and typical applications Conformity to DIN 13 and the specification 6g places this ring firmly within standardised metric thread inspection practices for external threads. The ring is suited to assembly verification, incoming goods inspection, and spot checks during machining of fine‑threaded rod and fasteners. Its right‑hand geometry matches the most common thread direction used in mechanical assemblies. The straightforward construction and normative reference make integration into existing quality routines uncomplicated and auditable, which supports traceability and process documentation. Choose the Metav IndustryLine M24 go ring for dependable thread verification and contact Metav Werkzeuge in Emmerich for detailed technical guidance or supply arrangements via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.124.4 GTIN: 4054469124384 Size: M24 x 1 Weight: 0.13 kg Material: hardened gauge steel Standard: DIN 13, 6g Tariff number: 90173000 Dimensions & tolerances Thread pitch: 1 mm Tolerance class: 6g Thread direction: right‑hand Type: Go (acceptance) ring Materials & features Hardened gauge steel construction For metric ISO fine threads Designed for production and incoming inspection Compact, easy to handle FAQ What does the Go ring verify for M24 x 1 threads? The Go ring confirms that an external M24 x 1 metric fine thread meets the acceptance profile specified by DIN 13 and tolerance 6g; passage means the thread is within the permissible limits. Is the gauge suitable for right‑hand threads only? Yes, this specific ring is made for right‑hand metric ISO fine threads and is marked accordingly for straightforward identification. How durable is the thread ring and how often is recalibration needed? Constructed from hardened gauge steel, the ring is wear‑resistant; recalibration intervals depend on use frequency and handling, but the robust material extends service life and reduces recalibration frequency. Can this gauge be used for final acceptance of parts in production? The Thread ring gauge M24 x 1 mm (Go) is suitable as an operational production control tool for pass/fail checks and incoming inspection; for full documentation, include periodic calibration records. Does the gauge comply with recognised standards? The ring is manufactured to DIN 13 with tolerance 6g, aligning it with standard metric thread inspection practices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M24×2 Thread Go Ring Gauge Metric Fine Pitch Right-Hand DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Reliable pass/fail verification for M24 x 2 mm metric ISO fine threads, combining hardened gauge steel construction with DIN 13, 6g tolerance for consistent inspection results; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M24 x 2 mm (Go), right-hand — Metav IndustryLine Thread ring gauge M24 x 2 mm (Go) for rapid verification of metric ISO fine threads in production control and workshop inspection Hardened gauge steel for long service life Conforms to DIN 13, tolerance class 6g M24 x 2 mm metric ISO fine thread, right-hand Compact 0.24 kg body for easy handling Faster go/no-go checks for reliable throughput A dedicated Go ring designed for the quick verification of metric ISO fine threads accelerates routine checks while maintaining traceable quality criteria. The gauge ensures a clear pass/fail decision without intermediate measurements, which reduces throughput time on the inspection bench and at the assembly station. Compliance with DIN 13 and tolerance class 6g guarantees that components accepted with this gauge meet established interchangeability standards, supporting consistent fit on mating parts and reducing rework. Robust construction that keeps inspection reliable Made from hardened gauge steel, this ring gauge resists wear and preserves the Go dimension over many cycles, maintaining measurement integrity across batch inspections. The compact mass of 0.24 kg and right-hand thread geometry make handling straightforward for workshop staff and bench inspectors alike; the weight provides a stable feel without being cumbersome. The simple, tactile nature of a Go ring reduces the need for repeated measurements and helps avoid operator uncertainty during pass/fail assessments. Simple integration into quality processes and traceability The gauge is intended for use in production control, incoming inspection and final checks where acceptance criteria must be enforced quickly and reproducibly. As a dedicated verification tool for M24 x 2 mm threads, it complements calipers and optical comparators by delivering a definitive functional check. The compact design and clear specification support easy storage in tool cabinets and orderly quality records; using standardised gauges like this one helps document conformity across production lots and supports supplier audits. For dependable thread verification choose the Metav IndustryLine Go ring gauge M24 x 2 mm — order via Metav Werkzeuge or contact our consultants for technical matching and supply advice Technical Data Article number: M315.124.7 GTIN: 4054469124407 Weight: 0.24 kg Material: Gauge steel, hardened Thread size: M24 x 2 Standard: DIN 13, 6g Facts Tariff number: 90173000 Category: Lehren / Measuring gauges Good gauge: Go (pass) type Special features Right-hand metric ISO fine thread Intended for pass/fail verification Compact, bench-friendly design Manufacturer brand: Metav IndustryLine FAQ What is the intended use of this ring gauge? The ring gauge is intended for pass/fail verification of M24 x 2 mm metric ISO fine threads in production control and inspection tasks. Which tolerance and standard does the gauge follow? This gauge complies with DIN 13 and tolerance class 6g, ensuring accepted parts meet standard interchangeability requirements. What material is the gauge made from and why is that important? Constructed from hardened gauge steel, the ring resists wear and maintains the Go dimension for prolonged, reliable service. Is this a Go (pass) gauge or a No-Go gauge? The item is a Go ring gauge, designed to confirm that a thread meets the minimum acceptance geometry for M24 x 2 mm. Can this gauge be used for production and incoming inspection? Yes, the gauge is suitable for both production-line checks and incoming inspection to ensure threads meet the specified DIN 13, 6g criteria. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M24×2 Thread Go Ring Gauge Metric ISO Fine Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a compact, standards-compliant inspection solution that combines DIN 13 (6g) tolerancing with hardened gauge steel for repeatable verification of metric fine threads; order the gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Thread ring gauge M24 x 2 mm — hardened gauge steel, DIN 13 (6g) the Thread ring gauge M24 x 2 mm is a precision inspection tool for verifying metric ISO fine threads in production and quality control environments Thread size M24 x 2 mm metric fine Hardened gauge steel construction Tolerance DIN 13, 6g specification Right-hand thread, workshop-ready Faster go/no-go decisions for metric fine threads The ring is manufactured for direct dimensional verification of M24×2 metric ISO fine threads, enabling rapid acceptance or rejection of threaded parts. Conformity to DIN 13 with a 6g tolerance class provides a clear, industry-recognised reference that reduces interpretation in the inspection process. Because the gauge is made of hardened gauge steel, wear resistance is increased and the tool maintains its dimensional integrity under repeated use. This combination of standard conformity and durable construction supports efficient quality workflows and reduces the need for secondary verification steps. Practical fit for production and QA routines Built as a compact, single-purpose control device, the gauge simplifies routine inspections on the shop floor and in the inspection bay. The right-hand thread configuration corresponds to standard mating parts, allowing direct thread engagement without conversion or adapters. Traceable identification via the SKU and GTIN ensures the gauge can be logged into quality systems and inventory lists, helping to maintain consistent inspection records. The moderate mass and robust material make handling straightforward while keeping the gauge stable during checks, which contributes to reproducible results across multiple operators. Traceability and workshop reliability Inspection staff benefit from a tool that links physical checks to documented standards: the ring's designation, material and norming information can be recorded in process documentation to support audits and batch traceability. The gauge’s construction from hardened gauge steel and its compliance with DIN 13 (6g) mean that recorded outcomes are meaningful in supplier control and incoming inspection contexts. For facilities seeking to harmonise measurement practice across several workstations, this ring offers a reliable baseline instrument that integrates with established production quality control routines. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine thread ring gauge into inspection processes or to request the M315.224.7 for immediate procurement and traceable delivery Technical data Article number: M315.224.7 GTIN: 4054469126067 Weight: 0.19 kg Thread size: M24 x 2 mm Material: hardened gauge steel Standard: DIN 13, 6g Thread hand: right-hand Facts Category: Gauges / Thread inspection EClass: 21170214 Tariff code: 90173000 Special features Metric ISO fine thread verification Durable, hardened construction Workshop and quality-control application Traceable SKU and GTIN FAQ What thread size does this ring gauge check? The ring checks M24 x 2 mm metric ISO fine threads as specified in the product label and technical data. Which tolerance class is applied to the gauge? The ring complies with DIN 13, tolerance class 6g, ensuring compatibility with standard metric thread specifications. What material is the gauge made from and why does it matter? Manufactured in hardened gauge steel, the gauge offers increased wear resistance and stability for repeated go/no-go inspections. Is this a right‑hand or left‑hand thread gauge? This is a right‑hand thread gauge, designed to engage standard right‑hand metric threads. How can the gauge be recorded in the quality system? Use the SKU M315.224.7 and GTIN 4054469126067 for inventory entries and traceable inspection records Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M24×3 Go/No-Go Thread Plug Gauge Metric ISO Regular Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Reliable thread acceptance and repeatable go/no-go control are achieved through the combination of hardened gauge steel, conformity to DIN 13 with 6H tolerance, and the precise M24 x 3 right-hand geometry; this ensures durable service life and consistent inspection results. Order the gauge directly via Metav Werkzeuge or consult the specialist team for application advice. Limit thread plug gauge M24 x 3 (right-hand) — Metav IndustryLine The limit thread plug gauge M24 x 3 is a hardened plug gauge designed for rapid acceptance testing of metric ISO standard right-hand internal threads in production and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Metric M24 x 3 right-hand thread Compact, workshop-ready weight 0.29 kg Precise acceptance testing for internal threads The main purpose of this plug gauge is to provide an unambiguous pass/fail decision during thread inspection using the familiar go/no-go principle. The M24 x 3 geometry and the 6H tolerance class correspond to the ISO/DIN metric thread system, allowing direct comparison with specified internal thread limits. By using a hardened plug in the control dimension, process engineers obtain rapid verification of thread form and pitch, which reduces cycle time during batch checks and limits rework. Durable construction that supports repeatability Built from gauge steel, hardened, the plug gauge resists wear under regular use and maintains consistent measuring geometry over many cycles. The hardened surface reduces abrasion when inserted repeatedly into threaded bores and preserves the defined acceptance criteria. With a compact mass of 0.29 kg, the gauge is easy to handle at the bench and suitable for routine shop‑floor checks where robustness and longevity deliver lower lifetime cost and fewer measurement interruptions. Integration into workshop inspection routines This limit plug gauge is suited to production control, assembly inspection and goods‑in checks where reliable thread validation is required. The right‑hand, metric ISO specification and DIN 13 compliance make it suitable for standardised quality plans and inspection records. Using a simple physical gauge eliminates interpretation ambiguity and supports traceable acceptance procedures; the clear go/no-go outcome helps maintain throughput without compromising on documented conformance. Choose the Metav IndustryLine limit thread plug gauge M24 x 3 for consistent thread acceptance checks and contact Metav Werkzeuge in Emmerich for delivery and technical advice from stock Technical data Article number: M315.024 GTIN: 4054469122700 Tariff number: 90173000 Numbers / Core technical data Thread: M24 x 3, right-hand Standard: DIN 13, 6H Weight: 0.29 kg eCl@ss: 21170235 Special features / Versions Material: gauge steel, hardened Category: Gauges — thread plug gauge Condition: good FAQ What is the intended use of this plug gauge? The limit thread plug gauge M24 x 3 is intended for go/no-go acceptance testing of metric internal threads, offering a definitive pass/fail check during production and inspection. Which thread standard and tolerance does the gauge follow? The gauge conforms to DIN 13 and the internal thread tolerance class 6H, matching standard metric ISO thread specifications. Is the gauge suitable for left‑hand threads? No — this plug gauge is manufactured for right‑hand metric threads only. What material is the gauge made from, and how does that affect service life? Manufactured from gauge steel, hardened, the gauge offers enhanced wear resistance and dimensional stability for prolonged use in routine inspections. How does the gauge aid process control on the shop floor? By providing a clear physical pass/fail criterion, the gauge streamlines acceptance decisions, reduces subjective measurement interpretation and supports consistent quality checks across batches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com