Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M24×3 Thread Go Ring Gauge Metric ISO Thread Right-Hand DIN 13, Hardened Gauge Steel - Metav IndustryLine
The hardened gauge steel construction combined with the DIN 13 (6g) specification provides a durable and repeatable acceptance check for metric M24 × 3 external threads. Use this Go ring to secure consistent production quality and reduce rework — order directly via Metav Werkzeuge or consult the product specialists for application guidance. Thread ring gauge M24 × 3 mm (Go) — DIN 13 (6g) • Metav IndustryLine A thread ring gauge M24 × 3 mm (Go) intended for fast verification of metric ISO M24 × 3 right‑hand external threads during production and incoming inspection Metric ISO M24 × 3 right‑hand Go gauge DIN 13 tolerance class 6g Hardened gauge steel construction Robust for repetitive production checks Ensure conformity with a standardised acceptance check The thread ring gauge is designed for straightforward verification of external threads to the DIN 13 standard with tolerance class 6g. As a Go (acceptance) ring, it confirms whether an external thread falls within the maximum material envelope required by the specification: the part shall pass the Go gauge to be accepted. This measurable criterion simplifies decision‑making in production control and inspection, turning subjective assessments into a repeatable, audited process that supports efficiency and reduces the risk of scrap. Built for durability and repeat use on the shop floor Manufactured from hardened gauge steel, the ring is resilient against wear from repeated engagement and is suitable for frequent on‑line checks. The material choice and hardened finish maintain the gauge profile over many cycles, preserving the acceptance boundary defined by the standard. At approximately 0.33 kg, the gauge is portable yet robust, allowing easy transfer between workstations or inspection benches without compromising handling or longevity. Practical integration into quality workflows The Go ring fits seamlessly into sampling plans and first‑off inspections where production control and traceable acceptance criteria are required. Used alongside dimensional plans and process documentation, the gauge helps to document conformity for batch releases and supplier incoming inspection. As a single‑function Go verification tool for right‑hand metric threads, it reduces uncertainty during fast checks and supports consistent throughput in high‑volume machining and assembly environments. For application advice or to secure the Metav IndustryLine M24 × 3 Go thread ring gauge, contact Metav Werkzeuge in Emmerich — specialists are available to discuss suitability and delivery options at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M315.124 SKU: M315.124 GTIN: 4054469124377 Facts Thread size: M24 × 3 Weight: 0.33 kg Tariff number: 90173000 Standard: DIN 13, 6g Special features Material: hardened gauge steel Right‑hand thread type Function: Go (acceptance) ring gauge Category: Lehren / Messstifte FAQ What is the primary purpose of this thread ring gauge? The thread ring gauge M24 × 3 mm (Go) is intended to verify that metric ISO M24 × 3 external threads meet the acceptance criteria defined by DIN 13 (6g) Does this gauge check right‑hand threads only? Yes, the thread ring gauge M24 × 3 mm (Go) is made for right‑hand metric ISO threads and will not be suitable for left‑hand thread verification What material is the gauge made from and how durable is it? The Metav IndustryLine Go ring is manufactured from hardened gauge steel, providing wear resistance and durability for repetitive production checks; weight is approximately 0.33 kg Does the Go ring indicate pass/fail tolerances for assemblies? The Go gauge confirms that an external thread fits within the maximum material requirement per DIN 13 (6g); acceptance by the Go ring supports conformity decisions in assembly and inspection Which standard and tolerance class apply to this gauge? This verification tool is specified to DIN 13 with tolerance class 6g for metric ISO threads; the designation corresponds to standard thread limits used in general engineering Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M25 x 2 mm Go Thread Ring Right-Hand Metric ISO Fine Thread DIN 13, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction and strict DIN 13 / 6g tolerance for repeatable thread checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M25 x 2 mm — hardened gauge steel, DIN 13 (Metav IndustryLine) The Thread ring gauge M25 x 2 mm is a right‑hand metric ISO fine‑thread ring gauge for quick and reliable verification of external threads in production and incoming inspection Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For metric ISO fine thread M25×2, right‑hand Precision tool for production control Reliable thread verification for consistent production quality The ring gauge is engineered for direct pass/fail assessment of external threads and serves as a compact, high‑confidence control point on the shop floor. Manufactured from hardened gauge steel, the gauge provides dimensional stability and wear resistance, which maintains thread fidelity across repeated use. Compliance with DIN 13 and the 6g tolerance class guarantees that measurements align with internationally accepted thread standards, reducing uncertainty when parts enter assembly or are passed on to customers. The M25×2 designation identifies the metric fine thread form, while the right‑hand orientation matches standard external thread production. Durable design that reduces rework and downtime A robust material choice and precision finishing translate directly into lower maintenance and fewer rejects during production. The gauge’s hardened steel body resists deformation and abrasion, so calibration intervals are extended and the tool retains a stable reference over time. Using a dedicated ring gauge for routine checks prevents the propagation of out‑of‑tolerance components and supports leaner quality processes: fewer corrective operations, less scrap and a smoother production flow. The compact mass (0.25 kg) makes the tool easy to handle at inspection benches without compromising stiffness. Simple integration into inspection routines and traceability Ring gauges are intended for immediate, tactile verification: a correct external thread should engage the gauge smoothly to the intended depth, while an oversize thread will be identified immediately by the no‑go condition. This straightforward method requires minimal training and is suitable for both in‑process checks and incoming goods inspection. The tool is supplied as a purpose‑built gauging solution suitable for assembly lines, inspection benches and maintenance departments. When paired with clear process documentation, the gauge supports reproducible results and consistent decision‑making across shifts. Specify the Metav IndustryLine thread ring gauge for DIN 13 compliance and contact Metav Werkzeuge for sample availability and expert advice Technical data Article number: M315.225.7 GTIN: 4054469126098 Manufacturer: Metav IndustryLine Facts Thread size: M25×2 Weight: 0.25 kg Tariff code: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, tolerance 6g Orientation: right‑hand metric ISO fine thread Type: ring gauge (no‑go function for external threads) Categories: gauges, measuring instruments FAQ What is the primary purpose of this ring gauge? The thread ring gauge M25 x 2 mm is used to verify external threads quickly and reliably, providing a simple pass/fail check to ensure parts conform to DIN 13 / 6g specifications. Can this gauge be used at the production machine for in‑process checks? Yes, the hardened construction and compact design make the gauge suitable for in‑process verification at the machine or on the inspection bench to reduce downstream rework. What materials is the gauge made from and how does that affect service life? The gauge is manufactured from hardened gauge steel, which improves wear resistance and dimensional stability, extending service life and reducing the frequency of replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M25x1 Gauge Ring Thread Go DIN 13 6g Right-Hand Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise, repeatable thread inspection with a hardened go ring gauge for M25 × 1 mm threads; the combination of conformity to DIN 13 (6g) and robust gauge steel supports consistent acceptance checks across production and incoming goods. Order directly from Metav Werkzeuge or consult our specialists for application-specific advice. Thread ring gauge M25 x 1 mm — hardened DIN 13, 6g (Metav IndustryLine) The Thread ring gauge M25 x 1 mm is a hardened go ring gauge for inspecting M25 × 1 mm metric ISO fine external threads to DIN 13 (tolerance class 6g), designed for workshop and production quality control in machining and assembly. Hardened gauge steel, durable inspection face Conforms to DIN 13, tolerance class 6g Suitable for M25 x 1 mm metric fine threads Right-hand thread check for production control Ensure conformity with a compact acceptance gauge The supplied ring is a go (acceptance) ring gauge, made from hardened gauge steel to withstand repeated use in production environments. As a gauge for external threads, it provides an immediate, unambiguous pass/fail result that speeds up throughput and reduces the need for time-consuming dimensional measurements. Conformity to DIN 13 and the 6g tolerance class means measurement decisions are traceable to established standards, helping to avoid downstream rework and improve overall process yield. Built for repeatability and fast inline checks Robust material selection and a compact form factor ensure long-term repeatability when used at inspection stations or on the shop floor. The tool’s right-hand configuration supports direct verification of standard metric fine threads without adapters, and its low mass (0.12 kg) simplifies handling and storage. The ring’s geometry resists wear, maintaining the calibrated acceptance boundary over many cycles; this reliability reduces inspection variance and supports a faster, more efficient quality workflow. Integration into quality assurance and traceability The gauge is suitable for incoming inspection, final checks and production sampling; it functions as a quick-go criterion to confirm thread conformity before assembly or shipment. For companies seeking documented assurance, the ring can be ordered via Metav IndustryLine and supplied with standard calibration documentation on request. Using a dedicated ring gauge shortens decision time, aligns with shop-floor quality procedures and contributes to demonstrable compliance in internal audits and customer reporting. Secure production compliance with Metav IndustryLine's M25 thread ring gauge — contact Metav Werkzeuge for expert advice and reliable supply. Technical Data Article number: M315.125.4 SKU: M315.125.4 GTIN: 4054469124414 Weight: 0.12 kg Thread size: M25 x 1 mm Pitch: 1 mm Tolerance class: 6g Norm: DIN 13 Direction: right-hand Material: hardened gauge steel Customs tariff number: 90173000 Facts Diameter nominal: 25 mm Pitch numeric: 1 mm Mass numeric: 0.12 kg GTIN numeric: 4054469124414 Tariff code numeric: 90173000 Special features Go (acceptance) ring gauge Hardened gauge steel material Right-hand metric ISO fine thread application Conforms to DIN 13, tolerance class 6g FAQ What does it mean that this is a "go" ring gauge? A go ring gauge provides an acceptance check for external threads; the Thread ring gauge M25 x 1 mm confirms that an M25 × 1 mm external thread meets the allowable limits defined by DIN 13 (6g). Can this ring gauge be used on the shop floor for production sampling? Yes. The hardened steel construction and compact form factor make the ring gauge suitable for routine production sampling and quick inline verification. Does the gauge check right-hand and left-hand threads? This specific ring is manufactured for right‑hand metric fine threads; left‑hand threads require a correspondingly designed ring. Is calibration documentation available with delivery? Standard calibration documentation can be provided on request; contact Metav Werkzeuge to specify traceability requirements for the ring gauge. What material and durability can be expected from this gauge? The gauge is produced from hardened gauge steel to resist wear and maintain the acceptance boundary over extended inspection cycles, supporting repeatable results. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M25x1 Thread Ring Gauge Go Right-Hand Metric ISO Fine DIN 13, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise thread inspection with a hardened gauge steel ring that follows DIN 13 and the 6g tolerance class for M25 x 1 metric ISO fine threads; the compact construction and 0.25 kg mass support fast handling and repeatable checks. Order the thread ring gauge directly via Metav Werkzeuge or ask the consultants for specification support. Thread ring gauge M25 x 1 mm — DIN 13, 6g, hardened gauge steel (Metav IndustryLine) The Thread ring gauge M25 x 1 mm is a hardened ring gauge for verifying M25 x 1 metric ISO fine threads according to DIN 13 with a 6g tolerance and right‑hand thread direction. Hardened gauge steel for long service life Complies with DIN 13, tolerance 6g Right‑hand M25 x 1 mm metric ISO fine thread Compact 0.25 kg mass for easy handling Consistent thread verification for production quality A precision thread ring gauge provides a concise pass/fail decision at the point of machining or assembly. Manufactured in hardened gauge steel, the ring maintains its form under repeated use, which reduces recalibration cycles and avoids premature replacement. The conformity to DIN 13 and the 6g tolerance class ensures compatibility with standard metric fine threads, enabling reliable interchangeability of threaded parts and fewer rejects in serial production. The compact geometry supports rapid go/no‑go assessments without complex equipment, improving throughput on shop floors where speed and repeatability matter. Durability and handling cut inspection time The robust material choice and compact mass result in a tool that is both wear‑resistant and ergonomically manageable. The low mass of 0.25 kg makes handling and position checks straightforward for technicians; the hardened steel resists surface damage that would otherwise alter the thread profile. These properties translate into fewer interruptions for gauge maintenance and a lower total cost of ownership over the life of the tool. Where production lines demand consistent quality, such mechanical gauges deliver immediate, unequivocal results that support fast decision‑making and fewer downstream rework operations. Traceability and suitability for quality systems The ring is supplied with clear identification suitable for inventory and traceability workflows; the physical marking and supplied SKU support integration into quality records and inspection routines. When used alongside documented inspection procedures, the gauge contributes to process control and accountability. Its right‑hand thread configuration and metric ISO fine pitch make it suitable for fixtures, housings and components manufactured to international thread standards, supporting both small series and larger production runs with straightforward, verifiable checks. Contact Metav Werkzeuge for delivery and expert specification advice on the Metav IndustryLine thread ring gauge M25 x 1 mm and ensure thread conformity within production workflows via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.225.4 GTIN: 4054469126074 Tariff number: 90173000 Core measurements Thread size: M25 x 1 mm Tolerance class: 6g Mass: 0.25 kg Standard: DIN 13 ECLASS: 21170214 Materials & features Material: hardened gauge steel Thread direction: right‑hand Category: Gauges / Measuring devices Label: Thread ring gauge M25 x 1 mm, metric ISO fine thread FAQ What is the intended use of this ring gauge? The Thread ring gauge M25 x 1 mm (Metav IndustryLine, SKU M315.225.4) is intended for go/no‑go verification of M25 x 1 metric ISO fine threads according to DIN 13 and the 6g tolerance class. Is the ring gauge suitable for serial production checks? Yes; the hardened gauge steel construction and compliance with DIN 13, 6g make the ring gauge suitable for repeated checks in serial production and in-process inspection. Can this gauge be used for left‑hand threads? No; this item is manufactured for right‑hand threads only. For left‑hand configurations a different ring gauge is required. How does the gauge support traceability in quality systems? The gauge is supplied with a clear SKU and marking that can be recorded in inspection protocols, enabling traceability of measurement activities for audits and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M25x2 Limit Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
This limit thread plug gauge combines DIN 13 conformity, hardened gauge steel and a compact design to deliver fast go/no-go verification of M25 × 2 metric fine threads; order directly via Metav Werkzeuge or consult our specialists for application advice. Limit thread plug gauge M25 × 2 mm (ISO metric fine thread), right-hand — Metav IndustryLine a limit thread plug gauge M25 × 2 mm for quick verification of ISO metric fine internal threads in production and inspection environments Hardened gauge steel for long service life Conforms to DIN 13, tolerance class 6H Designed for M25 × 2 ISO metric fine threads Right-hand thread for standard assemblies Faster, dependable go/no-go verification for production A compact limit thread plug gauge delivers unambiguous pass/fail results at line speed, reducing downtime caused by uncertain thread checks. With conformity to DIN 13 and tolerance class 6H, this gauge provides measurable assurance that internal threads meet international metric standards. The clear binary outcome of a limit gauge streamlines assembly and incoming‑inspection workflows, helping to limit rework and avoid production bottlenecks while maintaining traceable quality control procedures. Durable construction that keeps inspection precise Manufactured from hardened gauge steel, the tool resists wear and preserves its profile under repeated use, ensuring consistent repeatability across inspection cycles. The low mass (approximately 0.23 kg) makes handling straightforward while the robust material choice minimises dimensional drift over time. For routine quality control in workshops and machine shops, the hardened construction translates into fewer replacements and steady measurement performance, supporting reliable batch acceptance and long-term cost efficiency. Clear compatibility with ISO metric fine threads and practical use Sized for M25 × 2 threads and supplied as a right‑hand version, this gauge matches the common specifications used in fine‑pitch assemblies. As a limit plug gauge, it is intended for the verification of internal threads: the accepted profile confirms conformity, and the non‑acceptance indicates the need for further inspection or correction. Lightweight and straightforward to employ within standard inspection jigs, the unit integrates into existing quality routines without complex setup, supporting both shop‑floor speed and documented control procedures. For tailored advice or to secure this Metav IndustryLine limit thread plug gauge (SKU M315.025.7) for production or inspection use, contact Metav Werkzeuge in Emmerich for competent consultation and reliable supply Technical data Article number: M315.025.7 GTIN: 4054469122762 Manufacturer: Metav IndustryLine Facts Nominal thread: M25 Pitch: 2 mm Weight: 0.23 kg Tariff code: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, tolerance class 6H Thread orientation: right-hand Type: limit (go/no-go) thread plug gauge FAQ What does the limit thread plug gauge check? The limit thread plug gauge manufactured by Metav IndustryLine verifies whether internal threads meet the dimensional and tolerance requirements for an M25 × 2 ISO metric fine thread; it provides a clear go/no-go outcome. Is this gauge suitable for fine-pitch metric threads? Yes, the Metav IndustryLine limit thread plug gauge is specified for M25 × 2, a fine-pitch ISO metric thread size, and is manufactured to DIN 13 with tolerance class 6H. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, which maintains profile integrity under repeated use and ensures long-term repeatability for routine inspections. How is the gauge identified for ordering? The item is listed as SKU M315.025.7 and supplied by Metav IndustryLine; the GTIN is 4054469122762 for catalogue and logistics reference. Can this gauge be used on automated inspection stations? The robust construction and clear limit‑type function make it suitable for integration into established inspection workflows and jigs where go/no-go checks are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M25x2 Thread Ring Gauge Go Right-Hand ISO Metric Fine Pitch DIN 13, Hardened Gauge Steel - Metav IndustryLine
The combination of a precise M25 x 2 thread size, conformity to DIN 13 with tolerance 6g, and a hardened gauge steel construction ensures fast, repeatable go/no‑go checks and long service life; order the gauge directly via Metav Werkzeuge or consult our specialists for batch requirements. Thread ring gauge M25 x 2 mm 'Go' — Metric ISO fine thread, DIN 13 — Metav IndustryLine The Thread ring gauge M25 x 2 mm 'Go' is a hardened check gauge for right‑hand metric ISO fine threads, designed for rapid conformity tests in production and quality inspection. Go gauge for M25 x 2 metric fine thread Conforms to DIN 13, tolerance 6g Hardened gauge steel for long service life Right‑hand thread inspection tool Fast conformity control that keeps production moving A dedicated go ring gauge for fine threads offers a straightforward, reliable method to verify thread form and pitch without elaborate measuring equipment. The M25 x 2 dimension and DIN 13 specification mean the gauge is matched to widespread metric ISO fine‑thread tolerances; using such a gauge reduces downstream rejects and shortens inspection time compared with full dimensional analysis. The hardened working surface and concise design provide a tactile pass/fail result that is easy to document and repeat under shopfloor conditions, supporting throughput targets and lowering rework costs. Integrates into traceable inspection routines Designed for routine checks at assembly stations and incoming inspection, this go gauge brings consistency to routine quality control. The 6g tolerance reference and the right‑hand configuration allow immediate verification of threaded components against the applicable standard, aiding decision‑making during audits and batch release. The compact nature of the tool and its single‑function operation facilitate quick operator training and steady inspection cadence, while a clear pass/no‑pass result streamlines process flow in production and maintenance environments. Built to last and backed by dependable supply Manufactured from hardened gauge steel, the ring resists wear under frequent use, delivering predictable performance over extended service intervals and reducing the need for replacement. The robust material choice and simple geometry minimise calibration drift and mechanical damage during handling. As part of the Metav IndustryLine, the gauge benefits from Metav’s quality screening and European distribution, giving access to consistent stock levels and reliable delivery from Emmerich — an advantage for workshops and purchasers who value continuity and traceability in metrology tools. To ensure thread conformity on critical parts and benefit from Metav IndustryLine quality, contact Metav Werkzeuge for availability and expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.125.7 GTIN: 4054469124438 Label: Gewinde‑Lehrring M25 x 2 mm gut DIN 13, f. metr. ISO‑Feingewinde, rechts; 0,27 kg Facts Thread size: M25 x 2 Standard: DIN 13, 6g Weight: 0.27 kg Tariff number: 90173000 Special features Material: Gauge steel, hardened Type: Go ring gauge, right‑hand thread Application: Metric ISO fine thread inspection Category: Gauges FAQ What thread size does this gauge check? The ring checks M25 x 2 threads; the tool is specified for metric ISO fine threads in that size. Which standard and tolerance does the gauge follow? This go ring gauge is made to DIN 13 and references the 6g tolerance class for metric ISO fine threads. Is the gauge suitable for left‑hand threads? No — the design is for right‑hand threads only; left‑hand threads require a specifically‑made counterpart. What material is used and how durable is the gauge? The gauge is manufactured from hardened gauge steel, giving high wear resistance and long service life for frequent go/no‑go checks. How is the gauge used in a production environment? The ring is passed onto the external thread; a free fit indicates conformity, while interference signals reject. Record results for traceability during routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M25×1.5 Thread Go Ring, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Reliable inspection results through DIN 13 compliance, 6g tolerance and hardened gauge steel construction ensure repeatable checks with minimal set‑up time. Benefit from a compact, shop‑ready design that supports fast go/no‑go verification; order the ring gauge directly via Metav Werkzeuge or consult the company's specialists for application advice. Go ring gauge M25 x 1.5 mm — Thread ring gauge for metric ISO fine threads, right‑hand (Metav IndustryLine) The Go ring gauge M25 x 1.5 mm is a precision inspection ring intended for right‑hand metric ISO fine threads; designed for shop‑floor quality control and assembly verification in production and inspection environments. DIN 13 tolerance class 6g Hardened gauge steel construction Right‑hand metric fine thread M25 x 1.5 Compact shop‑floor weight 0.23 kg Repeatable conformity testing with industrial tolerances The gauge provides a straightforward means to verify thread conformity against DIN 13 with the 6g tolerance class, offering a clear pass condition for manufactured threads. Made from hardened gauge steel, the device resists wear during regular use and maintains accuracy across repeated cycles. As a simple acceptance tool, the Go ring gauge M25 x 1.5 mm removes ambiguity from visual inspections and supports faster inline checks, thereby reducing rework and non‑conforming part rates. Faster inspection cycles and ergonomic handling Compact construction and the modest mass of 0.23 kg make the gauge easy to handle at the workstation, enabling quicker go/no‑go checks without complex fixtures. The right‑hand metric configuration suits common assembly directions and allows inspectors to verify external thread profiles rapidly. By integrating this acceptance gauge into routine checks, measurement processes become more efficient and less dependent on lengthy gauge equipment set‑up, improving throughput while keeping quality control straightforward. Material, traceability and practical application notes Constructed from hardened gauge steel, the ring is made for longevity and consistent contact geometry; this material choice supports reliable dimension retention and abrasion resistance in industrial environments. The tool functions as a Go (acceptance) gauge for external threads and is listed with a clear article identity for procurement and inventory. Its compact size suits bench inspection, incoming part verification and final checks before assembly, ensuring a practical fit across machine shops and production lines. Order application‑matched gauges from Metav Werkzeuge for dependable thread inspection; contact Metav Werkzeuge in Emmerich for technical advice and local supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.125.6 GTIN: 4054469124421 Description: Go ring gauge M25 x 1.5 mm, right‑hand Facts Thread: M25 x 1.5 Tolerance: DIN 13, 6g Weight: 0.23 kg Tariff number: 90173000 Special features Material: hardened gauge steel Function: Go (acceptance) ring gauge Application: Metric ISO fine threads Category: Thread gauges / Gauges FAQ What does the 'Go' designation mean for this gauge? The 'Go' designation signifies that the Go ring gauge M25 x 1.5 mm is used as an acceptance gauge: a part that fits the ring meets the specified DIN 13, 6g limits and is considered conforming. Is the gauge suitable for shop‑floor use or only for laboratory checks? The hardened construction and compact weight make the Metav IndustryLine ring suitable for shop‑floor inspection as well as incoming goods control; it is intended for routine production checks. How should the gauge be stored to preserve accuracy? Store the ring in a dry, vibration‑free location and protect the contact surfaces from knocks and contamination; regular visual inspection and cleaning will help retain the gauge’s conformity characteristics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M25×1.5 Thread Go/No-Go Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The hardened gauge steel and DIN 13, 6H tolerance of this limit thread plug gauge ensure repeatable verification of right-hand metric ISO fine threads; its compact M25 x 1.5 mm profile supports reliable in‑process and incoming inspection. Order the gauge directly via Metav Werkzeuge or consult the Metav specialists for application advice. Limit thread plug gauge M25 x 1.5 mm (DIN 13, 6H) – Right‑hand by Metav IndustryLine The Limit thread plug gauge M25 x 1.5 mm verifies right‑hand metric ISO fine internal threads for production control and quality inspection across mechanical workshops and series manufacture Hardened gauge steel construction DIN 13, 6H nominal tolerance Right‑hand M25 x 1.5 thread profile Compact 0.31 kg for easy handling Consistent conformity for process control The gauge is engineered for repeatable thread verification, based on the DIN 13, 6H standard that defines the nominal profile for metric ISO fine threads. As a limit thread plug gauge, it provides a clear pass/fail decision for internal threads: the Go end confirms the minimum material condition while the No‑Go end detects out‑of‑tolerance oversize or form defects. The M25 x 1.5 mm designation identifies the pitch and nominal diameter; together with the hardened construction, this makes the tool suitable for routine checks during production and for incoming inspection in machining and assembly operations. Practical handling and inspection benefits Designed for workshop use, the gauge combines robust material and compact mass to simplify handling without sacrificing stiffness. The hardened gauge steel body maintains profile integrity under regular use, reducing rework and downtime caused by uncertain measurements. The right‑hand orientation is compatible with standard internal thread directions, and the plug format allows direct engagement with threaded bores, enabling fast inspection cycles and straightforward documentation of batch conformity. This design supports quality processes by delivering quick, unambiguous results within the measuring loop. Durability, traceability and regulatory fit Made from hardened tool steel and finished to the nominal profile, the plug gauge resists wear and preserves accuracy over extended service intervals. Identification data such as SKU M315.025.6 and GTIN 4054469122755 facilitate traceability in quality records and stock management. The compact weight (0.31 kg) eases transport between workstations or inspection benches while the defined tolerance class supports integration into calibration schedules and audit trails. For companies seeking reliable thread checking without extensive fixturing, this plug gauge delivers a practical balance of durability and repeatability. For precise thread verification, request the Metav IndustryLine limit thread plug gauge from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 to discuss suitability for specific production tasks Technical data SKU: M315.025.6 GTIN: 4054469122755 Weight: 0.31 kg Thread: M25 x 1.5 mm Standard: DIN 13, 6H Material: Hardened gauge steel Tariff number: 90173000 Facts Nominal diameter: 25 mm Thread pitch: 1.5 mm Mass: 0.31 kg Special features Right‑hand thread profile Limit (Go/No‑Go) plug gauge format Hardened tool steel for wear resistance Suitable for production and incoming inspection FAQ What does the Go/No‑Go function check on this gauge? The limit thread plug gauge M25 x 1.5 mm checks internal thread conformity: the Go end verifies acceptance limits, the No‑Go end signals oversize or form faults. Is the gauge suitable for series production inspection? Yes; the Metav IndustryLine plug gauge (SKU M315.025.6) is designed for repetitive use in production control and incoming inspection workflows. Which thread standard does this gauge follow? This gauge is manufactured to DIN 13, 6H, matching the metric ISO fine thread requirements for right‑hand internal threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M25×1.5 Thread Ring Gauge, ISO Metric Fine Pitch Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, precise DIN 13 (6g) tolerance and the compact M25 x 1.5 size to perform fast, reliable checks of metric ISO fine external threads; this reduces rejects and keeps inspection routines efficient. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M25 x 1.5 — DIN 13 (6g), hardened gauge steel (Metav IndustryLine) The Thread ring gauge M25 x 1.5 provides a straightforward shop‑floor check for metric ISO fine external threads, specified to DIN 13 tolerance class 6g and intended for right‑hand threads Hardened gauge steel for long service life DIN 13 tolerance class 6g For metric ISO fine threads, right‑hand Ensure conformity quickly on the production line This gauge is designed for direct verification of external threads against the DIN 13 specification and the 6g tolerance class, which makes it suitable for frequent checks during production or final inspection. Using a purpose‑made ring gauge eliminates time‑consuming measurements on complex fixtures: a part either meets the nominal criteria or it does not, which simplifies decision‑making and reduces throughput delays. The compact M25 x 1.5 form factor is common in fine‑thread applications, allowing rapid sampling without specialised equipment. Durable construction for repeatable results Manufactured from hardened gauge steel, the component offers wear resistance and dimensional stability under regular use, supporting consistent pass/fail assessments over many cycles. The robust material reduces the need for frequent replacement and helps maintain measurement repeatability in a typical workshop environment. Where traceable inspection records are required, the gauge integrates easily into established quality procedures and inspection benches, contributing to predictable process capability and fewer returns. Practical use and integration into quality workflows The ring gauge checks an external thread directly: successful seating indicates conformity to the nominal size and tolerance class, while non‑seating flags a deviation that requires rework or rejection. Its design suits rapid manual checks in assembly, incoming inspection and batch sampling. For uncertainty reduction, the gauge functions well alongside optical comparators or tactile measuring devices when a documented inspection route is needed. Metav IndustryLine supplies this type of gauge as a durable, uncomplicated tool for day‑to‑day thread control; technical advice is available for integrating the device into automated or manual inspection sequences. For specific availability, batch sizing or application guidance for Metav IndustryLine thread gauges, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — our experts will advise on stock and technical suitability Technical Data Article number: M315.225.6 GTIN: 4054469126081 Weight: 0.25 kg Material: hardened gauge steel Size/designation: M25 x 1.5 Standard: DIN 13, tolerance class 6g Manufacturer: Metav IndustryLine Facts Thread size: M25 x 1.5 Tolerance class: 6g Tariff number: 90173000 eCl@ss: 21170214 Special features Right‑hand metric ISO fine thread application Compact, shop‑floor friendly design Suitable for routine pass/fail thread verification Category: gauges / ring gauges / measuring instruments FAQ What does the M25 x 1.5 designation mean? The M25 x 1.5 designation denotes a metric external thread with a nominal diameter of 25 mm and a 1.5 mm pitch; the Thread ring gauge M25 x 1.5 is manufactured to verify that such threads conform to this nominal geometry. Is this gauge suitable for use in production sampling? Yes, the Metav IndustryLine ring gauge M25 x 1.5 is intended for rapid shop‑floor checks and batch sampling where a clear pass/fail outcome is required. Which standard does the gauge conform to? The gauge is specified to DIN 13 and is produced for tolerance class 6g, which is commonly used for metric ISO fine external threads. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel; this gives wear resistance and dimensional stability, ensuring longer service life and consistent inspection results. Can this ring gauge be used for left‑hand threads? No, this particular article is for right‑hand metric ISO fine threads; left‑hand versions must be specified separately Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M25×1mm Thread Go/No-Go Plug Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge steel construction and conformity to DIN 13, 6H for reliable go/no-go checks of metric fine threads. The result is consistent thread inspection with minimal downtime — order the gauge directly via Metav Werkzeuge or ask the consultants for specification support. Limit Thread Plug Gauge M25 x 1 (metric ISO fine, right-hand) — Metav IndustryLine The Limit Thread Plug Gauge M25 x 1 is a hardened plug gauge designed for quick go/no-go verification of metric ISO fine internal threads in production and quality‑control environments. DIN 13, 6H tolerance for metric ISO threads Hardened gauge steel for long service life Right-hand M25 x 1 fine thread inspection Compact 0.2 kg design for easy handling Keep production moving with precise, standards‑based checks A limit plug gauge that conforms to DIN 13 and the 6H tolerance class provides a clear, objective decision for pass/fail inspection. By offering a binary check—go/no-go—this tool eliminates interpretation, speeds up throughput and reduces the risk of incorrectly sorted parts. The direct measurement principle requires no display or power source, which simplifies integration into busy inspection benches and in‑process checks. Traceable, repeatable results help maintain consistent quality across batches and operators. Robust materials that reduce downtime and recalibration frequency Manufactured from gauge steel and hardened, the gauge resists wear across repeated use and retains its measuring edges for longer intervals between maintenance cycles. The small 0.2 kg mass and compact geometry make handling straightforward during manual inspections, while the solid construction supports repetitive engagement with internal threads without excessive deformation. Where durability matters, the hardened surface reduces profile wear and keeps reference limits stable over many checks. Practical fit for workshops and inspection rooms Designed for metric ISO fine threads, the plug gauge suits routine checks on assembled components, threaded inserts and mating parts in machining, assembly and toolmaking shops. The M25 x 1 designation matches industry standard components, facilitating direct compatibility with common fasteners and parts. As a simple limit gauge, it integrates well with visual workflows and documented quality procedures, delivering rapid go/no-go decisions that feed directly into production control systems and inspection records. Choose the Metav IndustryLine Limit Thread Plug Gauge M25 x 1 for dependable, standards‑compliant thread inspection and contact Metav Werkzeuge in Emmerich for specification advice and ordering details Technical data SKU: M315.025.4 GTIN: 4054469122748 Article: Limit thread plug gauge M25 x 1, metric ISO fine thread, right-hand Facts Thread size: M25 x 1 Weight: 0.2 kg Tariff number: 90173000 eClass: 21170235 Special features Material: gauge steel, hardened Tolerance / standard: DIN 13, 6H Type: limit (go/no-go) plug gauge Intended use: inspection of metric ISO fine internal threads FAQ What thread size does this gauge check? The Limit Thread Plug Gauge M25 x 1 (Metav IndustryLine, SKU M315.025.4) is specified for M25 x 1 metric ISO fine internal threads. Is the gauge suitable for production 100% inspection? Yes, the limit plug gauge is intended for rapid go/no-go checks and is suitable for high‑frequency inspections where a clear pass/fail decision is required. What material is the gauge made from and why does it matter? The gauge is made of hardened gauge steel, which preserves the measuring edges and reduces wear, maintaining measurement reliability over repeated use. Which tolerance standard does the gauge follow? This gauge is manufactured to DIN 13 and the 6H tolerance class, aligning it with common metric ISO internal thread specifications. Can this gauge be used for left‑hand threads? This particular item is specified as a right‑hand thread plug gauge; left‑hand variants must be ordered separately if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M26 x 1 mm Thread Ring Gauge Go, Metric ISO Fine Thread Right Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of fast, repeatable thread inspection with a hardened gauge steel construction and a precise DIN 13, 6g tolerance class; order directly via Metav Werkzeuge or contact our consultants for specification advice. Go Thread Ring Gauge M26 x 1 mm — hardened gauge steel, DIN 13 (6g) The Go Thread Ring Gauge M26 x 1 mm is a hardened acceptance ring for checking metric ISO fine threads in production and quality control environments. Hardened gauge steel body for long service life DIN 13 tolerance class 6g for ISO fine threads Right-hand metric thread M26 x 1 mm 'Go' acceptance ring for pass/fail inspection Precision inspection that safeguards production quality The hardened construction and defined tolerance class deliver a compact inspection tool that ensures threads meet specification at the point of manufacture. A DIN 13, 6g classification means the ring matches the standardised fit for metric ISO fine threads, enabling consistent acceptance testing without interpretation. Using a dedicated go gauge speeds up routine checks: if the ring enters smoothly, the thread conforms to the required internal geometry. This clear binary result reduces rework and inspection time, supporting efficient shop‑floor throughput and reliable batch release. Robust materials and design for repeatable results Made from hardened gauge steel, the ring is dimensionally stable and resistant to wear under normal use, which preserves measurement integrity over many cycles. The right‑hand M26 x 1 mm geometry is machined to tight limits so that the gauge maintains its form under handling and fits standard inspection fixtures. The compact mass (approx. 0.5 kg) aids controlled handling and reduces accidental shock during transfer. These material choices protect the investment in metrology equipment and reduce the frequency of replacement, supporting lower total cost of ownership. Integrating the gauge into quality workflows A dedicated ring gauge is simple to incorporate into existing quality processes: it can be used at a test station for incoming inspection, at a machine for first‑off checks, or at final inspection for batch acceptance. The unambiguous pass/fail nature of a go ring allows quick decisions and straightforward documentation. For traceability, include the ring’s article number and GTIN in inspection records; for repeatable outcomes, combine the ring with calibrated torque or gauge‑holding fixtures. The result is a measurable reduction in measurement variability and an increase in confidence when releasing parts. Choose the Metav IndustryLine Go Thread Ring Gauge M26 x 1 mm for reliable thread acceptance — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and prompt supply Technical Data Article number: M315.126.4 GTIN: 4054469124445 Material: gauge steel, hardened Thread size: M26 x 1 Weight: 0.5 kg Norm: DIN 13, 6g Hand: right-hand thread Facts Nominal thread: M26 Pitch: 1 mm Weight: 0.5 kg Tariff number: 90173000 Special features 'Go' acceptance ring (go gauge) Hardened gauge steel for wear resistance Metric ISO fine thread compliance Category: gauges — ring gauge Manufacturer: Metav IndustryLine FAQ What does 'go' mean for this ring gauge? A 'go' designation indicates this ring is an acceptance gauge: the Go Thread Ring Gauge M26 x 1 mm (Metav IndustryLine, SKU M315.126.4) must enter the tested internal thread without jamming for the part to be considered within tolerance. Which tolerance and standard does the gauge follow? The ring is manufactured to DIN 13 with a tolerance class of 6g, matching the standard fit for metric ISO fine threads and allowing standardised acceptance decisions. Is the gauge suitable for fine threads only? Yes; the geometry is specified for metric ISO fine thread M26 x 1 mm, making it appropriate for applications that require that nominal and pitch combination. How should the ring gauge be handled to preserve accuracy? Handle the ring by its outer circumference, avoid dropping or striking the gauge, and store it in a clean, dry place to maintain the hardened gauge steel surface and dimensional stability. Can the gauge be used in production for quick checks? Absolutely — the pass/fail nature of the go ring makes it ideal for machine‑side first‑article inspection, incoming control and final acceptance, supporting fast decisions and repeatable quality checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M26x1 Thread Gauge Ring Go, ISO Metric Fine Right-Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Taking advantage of proven conformity control, hardened gauge steel and the DIN‑13 tolerance class ensures consistent inspection results; order the thread ring gauge directly via Metav Werkzeuge or request consultation from their specialists. Thread ring gauge M26 × 1 mm — right-hand, DIN 13 (6g) Thread ring gauge M26 × 1 mm for the verification of metric ISO fine threads in production and incoming inspection Thread ring gauge M26 × 1 mm Tolerance class DIN 13, 6g Hardened gauge steel construction Right-hand metric ISO fine thread Consistent inspection through standardised tolerance control The thread ring gauge provides a fast, objective check for thread conformity. Manufactured to DIN 13 and matched to tolerance 6g, the gauge gives a clear go / no‑go decision during routine sampling or final inspection. The presence of a no‑go ring ensures that oversized threads are reliably identified, reducing the risk of assembly failures and costly rework. By converting dimensional requirements into a simple pass/fail test, the tool supports faster throughput and reproducible quality control on the shop floor. Robust construction for repeated workshop use Made from hardened gauge steel, the ring is designed for durable performance under regular handling. The material selection and heat treatment deliver a wear‑resistant surface that preserves the gauge geometry and measurement reliability over many inspection cycles. With a compact mass of 0.3 kg and a right‑hand configuration for metric ISO fine thread M26 × 1 mm, the component is easy to store and handle while offering the stiffness required for repeatable checks in production environments. Integration into quality workflows and traceability The ring is suited to incoming inspection, process control and final checks where traceable, standardised verification is required. Marked for the specific size and tolerance, it simplifies documentation and audit trails when combined with routine inspection records. The clear mechanical acceptance principle of the gauge supports technicians and inspectors with differing experience levels, enabling consistent decision‑making without complex measuring setups. For systematic inspection plans, the gauge complements optical or thread‑measuring devices by providing immediate go/no‑go confirmation. Contact Metav Werkzeuge for tailored inspection advice and to request the Metav IndustryLine M26 × 1 mm thread ring gauge; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M315.226.4 GTIN: 4054469126104 Mass: M26 × 1 mm Weight: 0.3 kg Standard: DIN 13, 6g Facts Tolerance class: 6g Thread form: metric ISO fine thread Handedness: right‑hand Material: hardened gauge steel Special features Go / no‑go functionality via no‑go ring Suitable for production and incoming inspection Compact, workshop‑compatible mass and dimensions FAQ What exactly is checked with this thread ring gauge? The ring checks the external thread form and size against the M26 × 1 mm metric ISO fine thread specification; the built‑in no‑go functionality flags oversized or non‑conforming threads. Is the gauge compliant with recognised standards? Yes, the gauge is manufactured to DIN 13 with tolerance class 6g, matching standard requirements for metric ISO fine threads. Which material is the ring made from and why does it matter? The ring is produced from hardened gauge steel, providing wear resistance and dimensional stability for reliable pass/fail inspections over prolonged use. Can this gauge be used for left‑hand threads? This specific item is provided as a right‑hand gauge for the M26 × 1 mm thread; left‑hand versions must be ordered separately. How does the no‑go function improve quality control? The no‑go ring delivers an unequivocal rejection criterion for oversized threads, helping to prevent assembly issues and maintain process capability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M26x1.5 Limit Thread Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of the combination of hardened gauge steel and DIN 13 6H accuracy for reliable, repeatable thread checks; order the limit thread plug directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug M26 x 1.5 mm — right-hand limit gauge by Metav IndustryLine, hardened gauge steel The Limit thread plug M26 x 1.5 mm is a right-hand limit gauge designed for fast go/no-go inspection of metric ISO fine internal threads in production and quality control. Hardened gauge steel construction For metric ISO fine threads M26 x 1.5 Manufactured to DIN 13, tolerance 6H Right-hand thread, limit plug design Proven accuracy for routine thread verification This limit plug is engineered as a compact, robust inspection tool for on‑machine and bench checks. The use of hardened gauge steel ensures wear resistance across repeated cycles, which maintains the gauge geometry and therefore the repeatability of acceptance checks. By providing a clear pass/fail outcome for a specific thread nominal, the device reduces measurement ambiguity and helps keep production lines moving with fewer stoppages. Standards-based tolerance for dependable results Manufactured to DIN 13 with tolerance grade 6H, the gauge corresponds to established metric ISO fine‑thread practice; this ensures compatibility with common engineering drawings and inspection plans. The declared tolerance class means the thread fit is judged against a normative reference rather than an ad hoc limit, so conformity assessments are consistent and traceable. Using a standards‑matched gauge simplifies documentation of quality checks and supports audit requirements. Practical handling and inspection benefits The right‑hand limit design is straightforward to use in repetitive testing: the feature profile confirms acceptance without complex measurement setup. At approximately 0.5 kg, the item combines sufficient mass for stable engagement with a manageable form factor for rapid handling. The compact geometry and hardened material make it suitable for workshop use, inline checks and small inspection stations where robust, unambiguous gauges are required. Confidence through industrial supply and support Supplied under the Metav IndustryLine label, the gauge benefits from the logistical and quality filters provided by a European precision partner. This provenance supports consistent availability and sensible stock management for maintenance or inspection departments. The combination of familiar standards, durable material choice and a specialist supplier helps create operational certainty and reduces the risk of unexpected non‑conformities. For stable thread control in series production, contact Metav Werkzeuge to secure this Metav IndustryLine limit thread plug and discuss your inspection requirements in detail. Technical data Article number: M315.026.6 SKU: M315.026.6 GTIN: 4054469122786 Tariff number: 90173000 Facts Thread size: M26 x 1.5 Tolerance class: DIN 13, 6H Weight: 0.5 kg Special features Material: gauge steel, hardened Design: limit thread plug for internal threads Thread direction: right-hand Application: metric ISO fine threads FAQ What is this gauge used for? The limit thread plug M26 x 1.5 mm is used for quick go/no-go verification of metric ISO fine internal threads to confirm whether a thread meets the specified tolerance class. Which standard does the gauge comply with? The item is produced to DIN 13 with tolerance grade 6H, so inspections performed with this gauge align with common metric thread standards and documentation practice. What material is the gauge made from? This Metav IndustryLine limit plug is manufactured from hardened gauge steel, chosen to resist wear during repeated inspection cycles and to preserve dimensional stability. Is the gauge right- or left-hand? The limit thread plug is a right-hand thread design, intended for checking right‑hand metric ISO fine internal threads. Can this gauge be used for routine shopfloor inspection? Yes; the robust construction and compact form make the M315.026.6 suitable for routine production and in‑line quality control tasks where simple pass/fail checks are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M26x1.5 Thread Ring Gauge Go Right Hand ISO Metric Fine Thread DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge-steel design and DIN 13, 6g conformity to secure reliable acceptance testing for M26 x 1.5 mm metric fine threads; order directly via Metav Werkzeuge or consult our specialists for application advice. Go thread ring gauge M26 x 1.5 mm (DIN 13, 6g) — Metav IndustryLine The Go thread ring gauge M26 x 1.5 mm is a right-hand acceptance gauge for checking metric ISO fine threads in production and incoming inspection. Hardened gauge steel construction DIN 13 tolerance class 6g For M26 x 1.5 mm metric fine thread Right-hand go ring for acceptance testing Reliable conformity for fast pass/fail decisions The DIN 13 tolerance and 6g class provide a clear, industry-recognised pass criterion that shortens inspection time and reduces subjective evaluation. As a go ring gauge, this tool confirms dimensional acceptability of external threads without complex measurement setups, enabling immediate go/no-go decisions on the shop floor. The direct consequence is fewer unnecessary rejects and faster throughput for repetitive production tasks. Durable build for long service life and reproducibility Manufactured from hardened gauge steel, the gauge resists abrasive wear and retains its functional accuracy under frequent contact; the nominal mass of 0.5 kg supports stable handling during repetitive testing. The right-hand orientation is matched to standard external threaded parts, and the robust material choice lowers the frequency of replacement—translating into lower long‑term inspection costs and consistent repeatable results for batch verification. Practical integration into quality workflows Built for straightforward use in assembly lines and quality control benches, the ring gauge suits acceptance testing, incoming goods inspection and routine production sampling of metric ISO fine threads. Its compact form factor and single-function design support rapid checks without specialised metrology training, while conformity to standard specifications simplifies documentation and audit trails. As part of Metav’s selected portfolio, this gauge benefits from reliable supply and industry-focused advice from the Emmerich distribution centre. For standardised acceptance testing with a hardened gauge-steel go ring gauge, contact Metav Werkzeuge for precise guidance and dependable delivery from our Emmerich warehouse Technical data SKU: M315.126.6 GTIN: 4054469124452 Weight: 0.5 kg Core specifications Nominal thread: M26 x 1.5 mm Tolerance class: 6g Standard: DIN 13 Tariff number: 90173000 Special features Material: gauge steel, hardened Type: Go ring gauge (acceptance gauge) Thread direction: right-hand Application: Metric ISO fine threads FAQ What standard and tolerance class does this gauge follow? The gauge follows DIN 13 and is manufactured to 6g tolerance, providing a standardised acceptance criterion for metric ISO fine threads. Which thread size is covered by this ring gauge? This go ring gauge is specified for M26 x 1.5 mm external threads and is suitable for inspection of metric ISO fine-thread components. What does "go" ring gauge mean in practical terms? A "go" ring gauge verifies that a threaded part fits within the maximum material condition allowed; if the part passes the go test with this gauge, it meets the specified acceptance limit. How does the material affect longevity and accuracy? Made from hardened gauge steel, the instrument offers improved wear resistance and sustained functional accuracy for routine pass/fail testing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M26x1.5 Thread Ring Gauge Go/No-Go Right-Hand ISO Metric Fine Thread DIN 13, 6g - Metav IndustryLine
Take advantage of a reliable combination of fast, unambiguous thread inspection and durable construction that supports continuous production. Designed for ISO fine-thread checks with a hardened gauge-steel body and DIN 13 tolerance class 6g, the gauge ensures consistent go/no-go verification; order directly from Metav Werkzeuge or consult our specialists for integration into existing quality workflows. Thread ring gauge M26 x 1.5 — DIN 13, tolerance 6g (right-hand) The Thread ring gauge M26 x 1.5 is a hardened ring gauge for quick verification of M26 x 1.5 metric ISO fine external threads to DIN 13, tolerance class 6g, suitable for right‑hand threads DIN 13 tolerance class 6g Hardened gauge steel construction For M26 x 1.5 ISO fine threads Fast, unambiguous verification for ISO fine threads A compact, purpose-built thread ring gauge delivers immediate pass/fail information for external metric threads. The gauge is manufactured to DIN 13 and checked to the 6g tolerance class, allowing clear acceptance criteria at the shop floor. Using a ring gauge for inspection reduces subjective judgements: the part either fits (go) or it does not, which streamlines quality control and shortens decision loops during series production. This approach benefits assembly accuracy and reduces the risk of rework. Durable construction for repetitive use in production Made from gauge steel, hardened, the component is designed for repeated handling in industrial environments. The robust material and heat treatment preserve the mating geometry over time, maintaining a stable limit condition for thread checks. As a right‑hand gauge for ISO fine threads, it resists wear from frequent engagement and cleaning cycles, so measurement integrity is retained across many checks. The solid build supports reliable tactile feedback during go/no-go inspection. Integration into quality routines and traceable inspection points A thread ring of this specification works well as a first-line control at machining cells or final assembly stations. Its simple go/no-go function accelerates throughput and reduces machine downtime by allowing operators to make fast, defensible decisions. When combined with documented inspection steps and batch tracking, the gauge becomes a dependable element of a traceable inspection system, improving process stability and customer confidence in delivered components. For reliable thread inspection choose the Metav IndustryLine thread ring gauge M26 x 1.5 and contact Metav Werkzeuge in Emmerich for delivery details and technical consultation Technical data Article number: M315.226.6 GTIN: 4054469126111 Manufacturer: Metav IndustryLine SKU: M315.226.6 Material: gauge steel, hardened Standard: DIN 13, 6g Facts Thread size: M26 x 1.5 Tolerance class: 6g (DIN 13) Weight: 0.3 kg Tariff number: 90173000 Special features Right-hand thread Category: Thread gauges / Go verification Application: metric ISO fine-thread inspection Durable, hardened gauge-steel construction FAQ What is the gauge intended to check? The Thread ring gauge M26 x 1.5 checks external metric ISO fine threads (M26 x 1.5) against DIN 13 tolerance class 6g for a clear go/no-go result. Is the gauge suitable for production use? Yes, the hardened gauge-steel construction and DIN 13 specification make this thread ring suitable for repeated production checks and routine shop‑floor inspection. Can the gauge be used for left‑hand threads? This specific gauge is made for right‑hand threads; left‑hand threads require a corresponding left‑hand ring gauge. How is conformity determined with this tool? Conformity is assessed by fit: a part that properly engages the go condition and does not pass the no‑go condition is within the specified tolerance range. Who supplies this gauge and where is it based? The gauge is supplied under the Metav IndustryLine label and is available via Metav Werkzeuge for European distribution and support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M26x1mm Go/No-Go Thread Plug Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a durable, standards‑compliant inspection tool that combines DIN 13 / 6H traceability with a hardened gauge steel body for reliable thread verification; order the gauge directly via Metav Werkzeuge or consult the specialists if further specification support is required. Limit thread plug gauge M26 x 1 mm — metric ISO fine thread, right‑hand (Metav IndustryLine) The Limit thread plug gauge M26 x 1 mm is designed for quick verification of right‑hand metric ISO fine threads in workshop and production quality checks. Metric ISO fine thread M26 x 1 Hardened gauge steel construction Tolerance DIN 13, 6H Right‑hand thread verification Ensure repeatable acceptance with a standards‑based gauge The gauge verifies that threads conform to the metric ISO fine profile and pitch, offering a clear, reproducible basis for acceptance decisions in incoming inspection and in‑process checks. Compliance with DIN 13 and class 6H specifies the permissible dimensional tolerance for the mating thread, which simplifies the pass/fail decision and reduces ambiguous measurements on production lots. Using a standardised limit plug like this M26 x 1 mm item supports documented quality procedures and audit trails. Minimise downtime with wear‑resistant construction Built from hardened gauge steel, the plug gauge resists abrasion and mechanical wear under frequent use, which maintains measurement integrity over many inspection cycles. A robust material choice lowers the need for frequent replacement, thus reducing total cost of ownership and the risk of undetected deviations. Consistent surface condition and hardness preserve thread form fidelity, so dimensional checks remain reliable even after repeated handling. Integrate easily into traceable inspection workflows Compact handling and a modest mass support fast manual checks at the production bench; the gauge is conveniently identified by its SKU and GTIN for inventory control and traceability. The simple, tactile verification it provides complements optical or digital metrology methods and accelerates routine quality gates. Sourcing from Metav IndustryLine ensures a dependable supply chain and documentation suitable for workshop records, helping to democratise precision across small and medium‑sized operations. For advice on suitability, calibration options or to request a specification sheet for this Metav IndustryLine limit thread plug gauge, please contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M315.026.4 SKU: M315.026.4 GTIN: 4054469122779 Weight: 0.5 kg Numeric data Thread diameter: 26 mm Pitch: 1 mm Tariff number: 90173000 Materials & standards Material: gauge steel, hardened Standard: DIN 13, 6H Thread form: metric ISO fine thread, right‑hand Categories: Gauges; Measuring pins FAQ What does the DIN 13, 6H marking mean for thread checking? The gauge is made to verify threads against the DIN 13 form with tolerance class 6H, so it confirms whether a manufactured internal or mating external thread meets the specified dimensional limits. Can this gauge be used for pass/fail inspection on the shop floor? Yes. The limit thread plug gauge M26 x 1 mm is intended for rapid tactile checks; it provides unequivocal pass/fail information when inserted into a threaded component. Is the material suitable for high‑use inspection routines? The hardened gauge steel construction of this plug gauge is selected for wear resistance and long service life in routine inspection environments. How is the product identified for stock and traceability? Identification is provided via SKU M315.026.4 and GTIN 4054469122779, aiding stock control and documentation in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M26x2 Limit Go Plug Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The product data contain contradictory quality information — the item is indicated both as rejected and as good. This inconsistency creates confusion and may lead to errors in processing or decision-making. Please verify the source dataset thoroughly to identify the root cause of the conflicting details. Once the issue is identified, take corrective measures to ensure the data accurately reflect the item's true quality status. Resolving this discrepancy is essential for generating a reliable product description and maintaining the integrity of the dataset. Accurate and consistent information is crucial for effective communication and operational efficiency.
M26x2 Thread Go Ring Right-Hand Metric ISO Fine Pitch, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of hardened gauge steel, precise DIN 13 / 6g tolerances and the compact M26 x 2 form for repeatable thread verification on metric ISO fine-threaded parts; order directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M26 x 2 mm — hardened gauge steel, DIN 13 (6g) — Metav IndustryLine A Thread ring gauge M26 x 2 mm designed to verify metric ISO fine threads in production and inspection environments. Thread ring gauge M26 x 2, right-hand Hardened gauge steel construction Conforms to DIN 13 with 6g tolerance Suited for verification of metric ISO fine threads Reliable inspection with proven thread geometry The ring is manufactured from hardened gauge steel, a material chosen for wear resistance and stability, ensuring long-term repeatability in routine checks. Built to the DIN 13 thread profile and the 6g tolerance class, the device provides a clear reference for acceptance criteria of external threads. The compact, robust construction reduces handling deformation and maintains geometry even under frequent use. Practical benefits on the shop floor Engineered for straightforward use in production control, this gauge shortens inspection cycles while increasing confidence in part conformity. The M26 x 2 size targets metric ISO fine-thread applications common in assemblies and machined components; the right-hand orientation matches standard manufacture. With a modest mass of 0.3 kg the gauge is easy to handle and integrate into measuring stations or handheld verification routines, reducing downtime and supporting efficient quality workflows. Durability, traceability and supply assurance Hardening of the gauge material minimises wear and preserves the thread form across many checks, lowering replacement frequency and total cost of ownership. The product is supplied under the Metav IndustryLine umbrella, benefitting from Metav’s European quality filter and warehouse logistics, which support reliable availability for industry and trade. Identification features such as the SKU and GTIN enable traceable stock and process documentation for the inspection sequence. For dependable thread verification with Metav IndustryLine precision, request detailed specifications or confirm delivery options through Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.226.7 GTIN: 4054469126128 Manufacturer: Metav IndustryLine Weight: 0.3 kg Core specifications Thread size: M26 x 2 Tolerance/class: 6g Standard: DIN 13 Tariff code: 90173000 eCl@ss: 21170214 Materials & features Material: hardened gauge steel Thread direction: right-hand Category: Gauges / Ring gauge FAQ What thread form and tolerance does this gauge check? The ring verifies the metric ISO thread form to DIN 13 with a 6g tolerance class for external threads. Is the gauge suitable for fine-thread production checks? Yes, the Thread ring gauge M26 x 2 mm is intended for verification of metric ISO fine threads commonly used in precision assemblies. What is the material and how does it affect service life? Manufactured from hardened gauge steel, the gauge offers increased wear resistance and stable thread geometry over repeated inspections. Can the gauge be used on standard inspection benches? The compact design and 0.3 kg mass make it suitable for handheld checks and integration into bench inspection routines where M26 x 2 threads are produced. How is the product identified for ordering and documentation? Use the article number M315.226.7 and GTIN 4054469126128 for unambiguous ordering and traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M26×2 Thread Ring Gauge Go Isotropic Hardened Gauge DIN 13 6g Right-Hand - Metav IndustryLine
Take advantage of precise thread verification and workshop durability by combining hardened gauge steel, conformity to DIN 13 and an immediately usable Go ring for M26 x 2 mm threads; order directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M26 x 2 mm (Go) – hardened gauge steel, DIN 13 A thread ring gauge M26 x 2 mm (Go) designed for right‑hand metric ISO fine threads, offering a robust inspection solution for production and incoming goods control Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6g Go ring for M26 x 2 mm metric fine thread Right‑hand thread inspection tool Fast, standards-based pass/fail control that saves inspection time This inspection ring is a dedicated Go gauge for M26 x 2 mm metric fine threads, engineered to deliver quick, unambiguous pass/fail decisions on the shop floor. The combination of a hardened gauge steel body and form accuracy to DIN 13 with tolerance 6g reduces subjective assessments and speeds up control loops. By using a dedicated ring gauge instead of comparative measuring, throughput increases while documenting compliance remains straightforward. Built to withstand repetitive use in production environments Constructed from hardened inspection steel and finished for wear resistance, the ring is suited to repetitive checks and continuous handling. The robust design maintains repeatability over many cycles, minimising recalibration frequency under normal workshop conditions. The compact, easily stowed format and modest mass ensure straightforward handling during batch checks and incoming goods inspection, while preserving the functional geometry required for reliable thread verification. Practical benefits for quality assurance and traceability Integrating this ring into a quality regime reduces assembly faults and prevents rejected threads reaching final assembly. As a calibrated inspection aid for right‑hand metric ISO fine threads, the gauge supports consistent manufacturing outcomes and easier conformity documentation. For traceable workflows, the clear designation as a Go ring and the adherence to DIN 13 provide an objective basis for acceptance criteria in internal audits and supplier checks. Metav’s distribution ensures reliable supply and access to technical guidance suited to workshop and production contexts. Contact Metav Werkzeuge for tailored advice on integrating the gauge into existing inspection routines or for compatibility checks with current fixtures and standards Technical data Article number: M315.126.7 GTIN: 4054469124469 Material: Lehrenstahl, hardened Thread size: M26 x 2 mm Norm: DIN 13, 6g Weight: 0.5 kg Facts Thread pitch: 2 mm Thread diameter: 26 mm nominal Tolerance class: 6g Direction: right‑hand thread Tariff number: 90173000 Special features Go ring gauge designation For metric ISO fine threads Robust, hardened inspection steel construction Category: Gauges / Ring gauges FAQ What size and pitch does the ring gauge check? The thread ring gauge checks an M26 x 2 mm metric fine thread (26 mm nominal diameter with a 2 mm pitch). Is this gauge suitable for right‑hand threads? Yes, the gauge is manufactured for right‑hand metric ISO fine threads and serves as a Go ring for quick acceptance testing. To which standard does the gauge conform? The ring conforms to DIN 13 with tolerance class 6g, providing a standardised basis for acceptance criteria. What material is used for the gauge? The gauge is made from hardened gauge steel, chosen for wear resistance and long service life under frequent inspection cycles. Can the gauge be used for routine incoming goods inspection? Yes; as a Go ring, the gauge is ideal for rapid checks during incoming goods inspections and production spot checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M27 x 2 mm Go Thread Ring Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Benefit from a hardened gauge‑steel ring that verifies M27 x 2 mm metric ISO fine threads to DIN 13 (6g) tolerance while resisting wear in busy inspection routines. Secure traceable, workshop‑ready gauges from Metav Werkzeuge or consult our specialists for integration into production control. Thread Go Ring Gauge M27 x 2 mm (DIN 13, 6g) — Metav IndustryLine The Thread Go Ring Gauge M27 x 2 mm is a hardened go ring for rapid verification of M27 x 2 mm metric ISO fine internal threads (right‑hand), designed for production inspection and incoming quality checks Hardened gauge steel construction DIN 13 tolerance class 6g Go ring for M27 x 2 mm metric fine thread Fast, reliable thread inspection for production A go ring gauge provides an immediate, binary check that an internal thread meets the specified form and pitch. Used at the production machine or on the inspection bench, the ring eliminates time‑consuming measurements by confirming acceptability in one simple pass/fail step. The M27 x 2 mm size and DIN 13 (6g) tolerance make this ring suitable for metric ISO fine‑threaded components where repeatable conformity is essential; this reduces downstream rework and keeps throughput steady. Robust construction ensures long service life Manufactured from hardened gauge steel, the ring is built to withstand frequent use in workshop environments. Hardening increases wear resistance and preserves the calibrated profile, so the gauge retains its dimensional accuracy over thousands of checks. The solid build also simplifies handling and storage in a production setting, giving quality teams a resilient tool that contributes to consistent inspection results and lower lifetime replacement costs. Clear specification and short inspection cycles The ring adheres to the DIN 13 standard and is marked for the 6g tolerance class, which provides well‑defined acceptance criteria for internal metric fine threads. As a right‑hand go gauge, it is intended to be used where the mating fastener or internal thread must unquestionably pass the go test. For traceability and process documentation, the ring’s article and serial references can be logged in quality records, supporting audits and compliance demands without complex measurement setups. Contact Metav Werkzeuge to discuss suitable inspection routines and secure this Metav IndustryLine M27 go ring gauge for reliable thread verification at your facility Technical Data Article number: M315.127.7 SKU: M315.127.7 GTIN: 4054469124506 Weight: 0.34 kg Material: Gauge steel, hardened Thread: M27 x 2 mm Tolerance: DIN 13, 6g Orientation: Right‑hand Tariff number: 90173000 eClass: 21170214 Facts Thread size: M27 Pitch: 2 mm Weight (kg): 0.34 Standard: DIN 13 Tolerance class: 6g GTIN: 4054469124506 Special features Go ring gauge (good) Metric ISO fine thread application Hardened for wear resistance Suitable for production and incoming inspection Category: Gauges / Ring gauges Brand: Metav IndustryLine FAQ What is a go ring gauge and how is it used? A go ring gauge is a go/no‑go verification tool for internal threads; the Thread Go Ring Gauge M27 x 2 mm confirms that an internal M27 x 2 mm metric ISO fine thread meets the required profile and pitch when it passes the go test. Which tolerance standard does this ring follow? The ring is manufactured to DIN 13 and marked for tolerance class 6g, providing clear acceptance criteria for metric ISO fine threads. Is the gauge suitable for production‑line checking? Yes, the hardened construction and simple go test make this Metav IndustryLine ring ideal for fast, repeatable checks on the shop floor and at incoming inspection. How should the ring gauge be stored to preserve accuracy? Store the gauge in a clean, dry environment away from corrosive agents; regular visual inspection and basic handling precautions will help maintain the hardened surface and profile accuracy of the M27 go ring gauge. Can this ring be used for right‑hand and left‑hand threads? This specific ring is produced for right‑hand M27 x 2 mm metric ISO fine threads; left‑hand applications require a dedicated left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M27 x 2 mm Thread Go Ring Gauge, DIN 13 6g, Right-Hand, Hardened Gauge Steel - Metav IndustryLine
Precision inspection that combines DIN 13 conformity with hardened gauge steel for repeatable acceptance checks; the compact M27 x 2 form factor and 0.36 kg mass make handling straightforward on the shop floor. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for integration into inspection workflows. Thread ring gauge M27 x 2 – DIN 13, tolerance 6g – Metav IndustryLine The thread ring gauge M27 x 2 is a hardened inspection gauge for right-hand metric ISO fine threads, designed for shop‑floor and laboratory quality control. Ring gauge M27 x 2, metric ISO fine thread Manufactured from hardened gauge steel Right-hand thread, DIN 13 tolerance 6g Weighs 0.36 kg, compact inspection tool Consistent conformity for routine inspections The thread ring gauge M27 x 2 delivers a clear, objective acceptance criterion for metric fine threads, referencing DIN 13 and tolerance class 6g. Using a dedicated ring gauge reduces interpretation during go/no‑go checks and speeds up throughput in serial production. The normative reference ensures results are comparable across suppliers and inspection stages, supporting documented quality control and easing supplier acceptance procedures. Robust material and compact handling for repeated use Made from hardened gauge steel, this inspection tool resists wear and maintains dimensional integrity over prolonged use, which reduces the frequency of replacement. Its modest mass (0.36 kg) and compact diameter simplify manual handling and fixture mounting. The construction is tailored for regular shop inspection cycles, where durability and low maintenance translate directly into lower process interruption and predictable inspection intervals. Clear specification that supports procurement and traceability Specification by M27 x 2 and DIN 13, 6g provides unambiguous criteria for purchasing and incoming inspection routines. The gauge’s designation as a right‑hand metric ISO fine thread makes it suitable for common fasteners and precision assemblies. Including the ring gauge reference in inspection plans improves traceability and helps avoid ambiguity in acceptance reports or technical drawings. Practical integration into quality workflows The gauge is immediately usable in tactile inspection sequences and can be combined with mechanical fixtures if repetitive automatic checks are required. Its compact form facilitates storage and quick identification on the inspection bench, while the standardised thread form ensures compatibility with existing documentation and control plans. For auditing and compliance, the normative standard printed on the gauge provides rapid verification of the inspected characteristic. Benefit-driven precision for production environments Adopting standardised gauges like this ring gauge supports efficient decision making at the production line: conformance is confirmed at the point of manufacture, rework and rejects are reduced, and downstream assembly quality improves. The robust build and clearDIN‑based marking make the gauge a practical component of a lean inspection toolkit that balances accuracy with operational simplicity. For specification advice or to secure supply of the M27 x 2 thread ring gauge from Metav IndustryLine, contact Metav Werkzeuge for expert guidance and reliable delivery from Emmerich. Technical Data Article number: M315.227.7 GTIN: 4054469126166 Tariff number: 90173000 Facts Thread size: M27 x 2 Pitch: 2 mm Weight: 0.36 kg Materials / Standards Hardened gauge steel Right‑hand metric ISO fine thread DIN 13, tolerance 6g Category: Gauges / Lehren FAQ What thread form and size does this gauge inspect? The ring gauge inspects M27 x 2 metric ISO fine threads in right‑hand form, specified to DIN 13 with tolerance class 6g. Is the gauge suitable for repetitive shop‑floor checks? Yes, the hardened gauge steel construction and compact mass make the ring gauge suitable for frequent manual inspections and fixture use in production environments. How is conformity recorded when using this gauge? Conformity is recorded as a pass/fail result against the DIN 13 criterion; including the gauge designation (M27 x 2, 6g) in inspection records ensures clear traceability. Can this gauge be used for acceptance testing of supplier parts? The standardised tolerance and thread form make the gauge appropriate for supplier incoming inspection and final acceptance tests of threaded components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M27x1 Limit Thread Go/No-Go Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a hardened gauge steel construction and strict DIN 13, 6H conformity for reliable thread verification in production. The combination of compact handling, repeatable go/no-go control and compatibility with metric ISO fine threads keeps throughput steady and rejects minimal. Order the Limit thread plug gauge M27 x 1 mm directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug gauge M27 x 1 mm — metric ISO fine thread, right-hand (Metav IndustryLine) The Limit thread plug gauge M27 x 1 mm is designed for fast, repeatable inspection of metric ISO fine threads in workshop and production environments, serving as a go/no-go reference for right-hand threads. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H For M27 x 1 mm metric ISO fine threads Right-hand limit plug gauge, go/no-go fit Reliable verification according to international thread standards The gauge is manufactured to match DIN 13 with a 6H tolerance class, providing an objective pass/fail criterion for internal threads. As a limit plug gauge, it embodies the established go/no-go principle: the "go" end verifies acceptance within tolerance while the "no-go" end confirms that oversize conditions are detected. This clear mechanical check reduces interpretation errors and supports consistent quality decisions on the shop floor. Durable materials for repeatable inspections Made from hardened gauge steel, the tool resists wear during routine checks and retains dimensional integrity over many cycles. The robust construction, paired with a compact mass (approx. 0.31 kg), delivers a balance of stiffness and ergonomic handling for handheld verification. Frequent use in production is therefore less likely to introduce measurement drift, which preserves part conformity and reduces rework. Streamlined process control and productivity gains Integrating a simple limit gauge into inspection routines shortens cycle times compared with measurement-heavy methods. The clear go/no-go result enables rapid sorting and immediate decisions at the point of production, helping to avoid downstream rejects. This pragmatic approach to quality control supports higher throughput while maintaining reliable acceptance criteria for metric ISO fine threads. Typical applications and handling recommendations The plug gauge is intended for inspection of internal metric ISO fine threads in components, assemblies and fixtures where an M27 x 1 mm thread is specified. The right-hand design matches standard fastener orientation. For consistent performance, keep the gauge clean, protect it from shocks, and store it in a dry environment. Periodic inspection against a master or accredited calibration service is recommended to maintain confidence in the inspection result. For tailored advice on integrating the Metav IndustryLine limit plug gauge into production, contact Metav Werkzeuge to request the M315.027.4 SKU or to arrange technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.027.4 GTIN: 4054469122816 SKU: M315.027.4 Facts Thread size: M27 x 1 mm Weight: 0.31 kg Tariff code: 90173000 eClass: 21170235 Special features Material: hardened gauge steel Standard: DIN 13, tolerance 6H Right-hand metric ISO fine thread plug gauge Function: limit / go-no-go inspection Category: Gauges / Plug gauges FAQ What thread form and size does this gauge inspect? The Limit thread plug gauge M27 x 1 mm inspects internal metric ISO fine threads of size M27 x 1 mm and is intended for right-hand threads. What standard and tolerance class does the gauge comply with? The plug gauge conforms to DIN 13 with a 6H tolerance, providing a standardised acceptance criterion for internal threads. What material is the gauge made from and why does it matter? This limit plug gauge is made from hardened gauge steel, which ensures wear resistance and dimensional stability for repeatable inspection results. How is the gauge used during production checks? Use the gauge as a go/no-go reference: the "go" end must enter freely; the "no-go" end must not. The Limit thread plug gauge M27 x 1 mm simplifies pass/fail decisions at the machine or assembly station. Is the gauge suitable for routine quality control on the shop floor? Yes, the Metav IndustryLine limit plug gauge (SKU M315.027.4) is designed for shop-floor verification of metric ISO fine threads, offering fast, objective checks to support process control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M27x1 Three-Point Thread Ring Gauge Metric ISO Fine Thread Right Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of standard‑compliant tolerance checking, hard‑wearing construction and straightforward handling to speed up in‑line thread inspection. Order the ring gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread ring gauge M27 x 1 mm — Metav IndustryLine (DIN 13, 6g) A Thread ring gauge M27 x 1 mm designed as a right‑hand metric ISO fine‑thread inspection ring for rapid conformity checks in manufacturing and quality control. Hardened gauge steel construction DIN 13 tolerance class 6g Right‑hand M27 x 1 thread Fast verification for workshop quality control For routine thread inspection, this ring gauge delivers a clear go/no‑go result that simplifies decision making on the shop floor. Built to the DIN 13 standard with a 6g tolerance class, the inspection ring supports consistent acceptance criteria and reduces ambiguity during sampling. The clear pass/fail principle shortens inspection time, improving throughput without sacrificing repeatability or traceability. Durable material for long service life Manufactured from hardened gauge steel, the ring withstands repeated engagement with internal threads and retains profile accuracy over time. The robust construction reduces wear and the need for frequent replacement, supporting predictable maintenance cycles. At approximately 0.36 kg, the unit combines solid feel with easy handling for technicians performing frequent checks on production lines. Simple handling that fits existing processes The ring is made for direct insertion into internal threads to verify dimensional conformity of M27 x 1 metric fine threads; its right‑hand orientation matches standard threaded components. Using the gauge in regular inspection plans shortens setup and measurement time compared with optical or CMM methods for quick checks, enabling faster corrective action and fewer downstream rejects. Built to standard and traceable for quality systems Designed in accordance with DIN 13 and supplied with identifiable product data, the inspection ring supports quality documentation and audit trails. The product is listed under M315.227.4 and carries a GTIN for straightforward inventory and traceability. Sourcing via Metav IndustryLine connects the tool with an established European distribution and quality‑filtering process that helps ensure consistent supply and performance. Contact Metav Werkzeuge in Emmerich for tailored recommendations on integrating the M27 thread ring gauge into inspection routines or to request purchasing details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.227.4 GTIN: 4054469126142 Thread size: M27 x 1 mm Weight: 0.36 kg Norm: DIN 13, 6g Facts Material: gauge steel, hardened Orientation: right‑hand thread Tariff number: 90173000 Category: Thread inspection ring / gauge Special features Configured as a reject/no‑go inspection ring Suitable for metric ISO fine threads Robust design for frequent shop‑floor use Metav IndustryLine supply and traceability FAQ What thread form and size does this gauge check? The Thread ring gauge M27 x 1 mm is specified for metric ISO fine threads with a pitch of 1 mm and is intended for right‑hand internal thread verification. What material is used and how durable is the gauge? The inspection ring is made from hardened gauge steel, chosen for wear resistance and long service life under repeated engagement. Which tolerance standard applies to this ring? The ring complies with DIN 13 and the tolerance class 6g, making it suitable for standardised quality checks in mechanical production. How is the ring typically used in a production environment? Operators insert the ring into the internal thread; a full engagement indicates conformity while refusal to engage shows non‑conformity, enabling rapid go/no‑go decisions without complex measurement setups. Is the product traceable for quality systems? Yes, the gauge is identified by M315.227.4 and a GTIN, facilitating inventory control and traceability within documented inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M27x1.5 Thread Go Ring Gauge Metric ISO Fine Right-Handed DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of precision, robust design and straightforward inspection workflow for reliable thread verification in production. The hardened gauge steel construction and DIN 13 tolerance class 6g provide repeatable go/no‑go results for metric ISO fine threads; order the go ring gauge directly via Metav Werkzeuge or consult the technical team for application support. Go ring gauge M27 x 1.5 mm — hardened gauge steel, DIN 13 (6g) The Go ring gauge M27 x 1.5 mm is a precision inspection ring designed for fast verification of metric ISO fine threads in production and quality control environments Hardened gauge steel construction DIN 13 tolerance class 6g For metric ISO fine thread M27 x 1.5 Right‑hand thread verification Accurate thread verification that prevents defects The primary role of this inspection ring is to deliver a clear go/no‑go decision at the assembly or inspection stage, ensuring that threaded components comply with the DIN 13 specification and the 6g tolerance. Manufactured from hardened gauge steel, the ring provides a stable reference geometry that resists wear and maintains its profile under repeated handling. This direct mechanical check is significantly faster than destructive testing and reduces the risk of mounting flawed parts, which in turn lowers scrap rates and rework costs across batches. Robust construction for dependable everyday use Engineered for workshop and production-floor environments, the ring combines a compact form with durable materials. The hardened gauge steel body withstands routine contact and retains dimensional integrity, while a modest mass of 0.38 kg facilitates convenient handling during inline or manual inspections. The right‑hand thread geometry matches standard assembly directions for metric ISO fine threads, enabling inspection processes to be carried out without special fixtures. The result is a measuring tool that supports high throughput while requiring minimal maintenance. Fits seamlessly into quality workflows and reduces cycle time As a direct inspection tool, the ring enables rapid checks at goods‑in, during machining operations and at final inspection. The clear pass/fail nature of the check shortens decision time and simplifies operator training compared with instrument-based measurements that require interpretation. Integration into established quality routines improves overall process reliability and supports traceable production steps. For buyers seeking a straightforward thread verification solution, the go ring gauge offers a pragmatic balance of accuracy and operational efficiency. Contact Metav Werkzeuge for purchase or application advice on the Metav IndustryLine go ring gauge M27 x 1.5 mm and benefit from tailored recommendations and prompt European supply from Emmerich Technical Data Article number: M315.127.6 GTIN: 4054469124490 Weight: 0.38 kg Size: M27 x 1.5 Facts Nominal thread: M27 Pitch: 1.5 mm Tolerance class: 6g Tariff code: 90173000 Special features Material: hardened gauge steel Standard: DIN 13 Thread type: metric ISO fine thread, right‑hand Type: Go ring gauge Category: Gauges / Ring gauges FAQ What nominal size and pitch does this ring check? The ring checks an M27 nominal thread with a 1.5 mm pitch, suitable for metric ISO fine threads. Which tolerance class is represented by the gauge? This go ring gauge is made to tolerance class 6g in accordance with DIN 13. What material is the gauge manufactured from? The gauge is manufactured from hardened gauge steel to preserve profile accuracy during repeated use. Is this gauge intended for left‑ or right‑hand threads? The ring is produced for right‑hand metric ISO fine threads. How does this tool support production quality control? As a go ring gauge, the tool delivers a rapid go/no‑go inspection that shortens decision cycles and reduces the need for time‑consuming instrument measurements Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com