Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M27x1.5 Thread Limit Go Plug Gauge Metric ISO Fine Right-Handed, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Data inconsistency detected: the product record contains contradictory quality information, indicating that the item is simultaneously marked as scrap and as good. This inconsistency creates a conflict that prevents the generation of a reliable product description. As a result, it is essential to verify the source data and correct the conflicting quality status to ensure the specification is clear and unambiguous. Without accurate information, the product description cannot be finalised. If assistance is required to resolve the discrepancy or to confirm the correct product attributes, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Our team is available to support verification and reissue the product description once the data has been clarified.
M27x2 Go/No-Go Thread Ring Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6H - Metav IndustryLine
Data inconsistency detected in the product record: contradictory status values are present. This issue may arise due to discrepancies in the source data or errors during data entry. Please verify and correct the source data to ensure accuracy and consistency across all records. Resolving this inconsistency is essential before a product description can be generated, as accurate status values are critical for maintaining reliable product information. Failure to address this issue may lead to further complications in downstream processes, such as inventory management or customer-facing documentation. Kindly review the data thoroughly and implement the necessary corrections promptly.
M27x3 Limit Thread Go Gauge Right-Hand For Metric ISO Thread, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of DIN 13 conformity, hardened gauge steel construction and the compact handling weight for reliable production checks; order the limit thread plug directly via Metav Werkzeuge or request application advice from our consultants. M315.027 — Limit thread plug gauge M27 x 3 mm (metric ISO, right-hand) by Metav IndustryLine The M315.027 is a limit plug gauge designed for quick Go/No‑Go verification of M27 x 3 mm metric ISO threads in production and inspection environments. Limit thread plug for M27 x 3 mm Hardened gauge steel for long life Manufactured to DIN 13, tolerance 6H Right-hand thread for standard applications Consistent conformity to international thread standards The primary advantage of this limit plug is its adherence to DIN 13 with the 6H tolerance class, which ensures reliable判 conformity checks during incoming inspection and in-process control. Built as a Go/No‑Go instrument, the gauge provides a straightforward binary assessment that reduces interpretation time and increases throughput; a pass/fail outcome speeds repetitive checks while preserving traceability of inspection results. Using a purpose-made limit plug transfers measurement certainty into the workflow, lowering the risk of out-of-spec components reaching assembly. Durable construction for workshop and shop‑floor use Constructed from hardened gauge steel, the gauge resists wear from repeated engagement with threaded parts and maintains form stability over many cycles. The robust material choice supports consistent repeatability of checks, reducing the need for frequent replacement and protecting process capability. The compact mass and balanced geometry facilitate handling during serial checks, while the right-hand thread geometry matches standard production parts to avoid confusion at the bench. Durability here translates directly into lower operational interruptions and predictable inspection intervals. Simple inspection routine that integrates with quality systems As a limit plug, the device is intended for direct tactile verification: the Go end confirms minimum acceptance dimensions and the No‑Go end signals oversize threads. This uncomplicated method complements documented quality procedures and can be incorporated into visual control plans or routine work instructions. The gauge’s specification and measurable attributes support record keeping and supplier control activities, helping to demonstrate compliance during audits and to maintain consistent assembly quality across batches. For precise thread gauging and reliable conformity checks, contact Metav Werkzeuge to discuss the M315.027 limit plug gauge and its suitability for specific production tasks — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.027 Description: Limit thread plug gauge M27 x 3 mm, metric ISO pitch, right-hand Weight: 0.33 kg GTIN: 4054469122809 Tariff number: 90173000 Core technical data Thread size: M27 x 3 mm Tolerance class: 6H Standard: DIN 13 ECLASS: 21170235 Special features Material: gauge steel, hardened Thread hand: right-hand Product category: gauges; plug gauge Intended use: Go/No‑Go thread verification FAQ What does the Go/No‑Go function mean for thread inspection? The Go/No‑Go arrangement provides a binary check: the Go end of the M315.027 confirms that the internal thread is at least the minimum acceptable size, while the No‑Go end detects threads that exceed the maximum limit, enabling fast and unambiguous decisions. Is the M315.027 suitable for serial production checks? Yes, the limit plug gauge is designed for repetitive shop‑floor use; its hardened gauge steel construction and conformity to DIN 13 ensure durability and consistent results in serial inspection tasks. Which tolerance is verified with this gauge? This plug gauge verifies threads to the 6H tolerance class specified in DIN 13, matching standard metric ISO internal thread requirements for many engineering applications. Can the gauge be used on non‑standard or handed threads? The M315.027 is manufactured for right‑hand metric ISO threads; non‑standard or left‑hand threads require a dedicated gauge matched to that geometry. How should the gauge be stored and cared for? Store the gauge dry and clean to preserve its hardened surface; regular visual inspection for wear is recommended, and replacement is advised when wear affects the Go/No‑Go performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M27x3 Thread Gauge, Right-Hand, Go Ring, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
The M27 x 3 mm GO thread ring gauge delivers repeatable pass/fail assessment through hardened gauge steel and DIN 13 (6g) tolerance, ensuring consistent quality control on external metric threads. Combine clear inspection criteria with robust wear resistance for reliable shop-floor use. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread Ring Gauge M27 x 3 mm 'GO' — hardened gauge steel, DIN 13 (6g) A Thread Ring Gauge M27 x 3 mm 'GO' designed for rapid pass/fail inspection of external metric ISO threads in production and incoming inspection. DIN 13 tolerance class 6g Hardened gauge steel construction GO (pass) ring for M27 x 3 threads For metric ISO right-hand threads Consistent pass/fail inspection that speeds up production control A hardened GO ring gauge provides an unambiguous pass/fail result that simplifies inspection routines and reduces measurement interpretation. With the DIN 13 tolerance and 6g class, the gauge verifies that external threads meet the metric ISO specification for acceptance; this removes guesswork at the control station and shortens decision time during series production. The straightforward design supports fast cycle checks without complex setup. Durable construction for long-term repeatability Manufactured from hardened gauge steel, the ring resists wear and maintains dimension stability over repeated use, which reduces replacement costs and downtime. The material choice ensures that the gauge preserves its acceptance boundary under normal shop conditions, providing predictable repeatability across batches. The compact ring form and balanced mass also make handling efficient for shop-floor operators tasked with frequent inspections. Traceability and shop integration for reliable documentation Marked with SKU M315.127 and GTIN 4054469124476, the gauge integrates into inventory and traceability systems used in quality departments, enabling clear documentation of inspection tools. Designed as a GO ring for right-hand metric threads, it fits inspection routines for incoming goods and final checks on machined parts. Metav’s quality filter and proximity in Emmerich support dependable supply and quick clarification should technical questions arise. For application advice or to arrange supply from Metav Werkzeuge in Emmerich, contact our team to confirm suitability for specific thread series and production workflows Technical Data Article number: M315.127 GTIN: 4054469124476 Weight: 0.49 kg Material: Gauge steel, hardened Standard: DIN 13, 6g Type: GO (pass) ring gauge Dimensions & measurable data Thread size: M27 x 3 mm Tolerance class: 6g Tariff number: 90173000 Features & applications For metric ISO external threads Right-hand thread design Category: Gauges / Thread gauges Use case: Production inspection and incoming goods FAQ What does a GO thread ring gauge check? A GO ring gauge checks whether external threads conform to the acceptance limits; the M27 x 3 mm GO ring confirms that the thread falls within the DIN 13 6g tolerance for a pass result. Can this gauge be used on any M27 x 3 threaded part? The GO ring gauge is intended for external metric ISO right-hand threads sized M27 x 3 mm and provides a pass/fail verdict when the thread matches the standard acceptance profile. How durable is the material of the gauge? Made from hardened gauge steel, the ring gauge is engineered for wear resistance and dimensional stability, supporting frequent shop-floor inspections with sustained repeatability. Is the M315.127 suitable for traceability in quality systems? Yes. The item is supplied with SKU M315.127 and GTIN 4054469124476 to facilitate inventory control and documentation within quality-management workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M27×1 Thread Ring Gauge "Go" Metric ISO Fine Right-Handed Hardened Gauge, DIN 13 6g - Metav IndustryLine
Take advantage of precise thread verification and robust construction to speed up quality checks and reduce rework; the hardened gauge steel construction and compliance with DIN 13 (6g) ensure repeatable results. Order the gauge directly via Metav Werkzeuge or consult Metav's specialists for application advice. Thread Ring Gauge M27×1 Go (DIN 13, 6g) — Metav IndustryLine The Thread Ring Gauge M27×1 Go is a hardened ring gauge for right‑hand metric ISO fine threads, intended for rapid go/no‑go verification in production and inspection settings Hardened gauge steel for long service life Conforms to DIN 13, tolerance grade 6g Right‑hand metric fine thread verification Fast, reliable go/no‑go checks for production flow The go ring gauge provides an immediate pass/fail decision during in‑process inspection, allowing rapid throughput without elaborate measurement setups. Designed for the M27×1 metric fine thread, the ring enables repeatable checks to DIN 13 with 6g tolerance attribution, which supports consistent component acceptance and reduces downstream rework. Use of a dedicated ring for verification shortens cycle times and improves overall equipment effectiveness by simplifying the acceptance step to a tactile check Durable construction that keeps calibration cycles long Manufactured from hardened gauge steel and heat treated for dimensional stability, the gauge resists wear and maintains true form across many inspection cycles. The robust material selection and finishing minimise thread distortion and surface degradation, contributing to lower frequency of rework and calibration events. For organisations seeking predictable maintenance intervals, the combination of material quality and precise thread form helps protect measurement integrity and extends service life Traceability and quality workflows made straightforward Integration into traceable quality systems is straightforward: the ring supports clear batch marking and can be logged against inspection procedures to document conformity. The compact, purpose‑built design eases handling at the control station and complements machine‑side checks where a quick verification is required. Metav’s market position as a precision partner provides additional assurance through dependable supply and product consistency, helping maintain confidence in inspection routines and procurement choices For precise thread verification and expert application support, contact Metav Werkzeuge to discuss deployment options and ordering—Metav Werkzeuge can advise from Emmerich and provide delivery and documentation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.127.4 GTIN: 4054469124483 Thread size: M27×1 Material: hardened gauge steel Standard: DIN 13, 6g Type: Go ring gauge Thread direction: Right‑hand Facts ECLASS: 21170214 TARIC / Customs code: 90173000 Pitch: 1 mm Special features Precision ground internal thread Designed for metric ISO fine threads Compact form for shop‑floor verification Category: Gauges / Inspection tools FAQ What does "go" mean for this ring gauge? The go classification indicates the ring is intended to check that an internal thread accepts the master gauge; the Thread Ring Gauge M27×1 Go (Metav IndustryLine, M315.127.4) confirms that the internal thread meets the specified maximum material condition. Which standard and tolerance does this gauge comply with? This ring gauge complies with DIN 13 and is produced to tolerance grade 6g, ensuring compatibility with standard metric ISO fine thread specifications for acceptance testing. What material is the gauge made from and why does that matter? The gauge is manufactured from hardened gauge steel; this material choice provides wear resistance and dimensional stability, preserving the thread form and extending useful service life under frequent use. Can this gauge be used on left‑hand threads? No, this particular ring gauge is specified for right‑hand metric threads; left‑hand thread verification requires a matching left‑hand gauge. How should the gauge be used in a production environment? Use the ring gauge as a tactile go/no‑go check at the inspection point: a correct part should accept the go ring without forced entry. Record results in the inspection log to maintain traceability for process control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M27×1.5 Thread Go Gauge Right-Hand Metric ISO Fine Thread DIN 13, Hardened Gauge Steel, 6g - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 tolerance class 6g and the precise M27 x 1.5 sizing for consistent thread verification; order directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Thread Ring Gauge M27 x 1.5 — Metric ISO fine thread, DIN 13 (6g), Metav IndustryLine Thread Ring Gauge M27 x 1.5 is a hardened inspection gauge designed to verify external metric ISO fine threads in right‑hand form for production and quality control applications Hardened gauge steel construction Conforms to DIN 13 tolerance class 6g For M27 x 1.5 metric fine thread Right‑hand external thread verification Reproducible thread verification for reliable assembly The ring is intended for fast, repeatable verification of external metric ISO fine threads, ensuring parts meet the dimensional requirements set out in DIN 13. With a defined tolerance of 6g, the gauge helps to detect deviations before components reach assembly, reducing the risk of faulty fits and rework. Used on the shop floor or at incoming inspection, this inspection tool provides a clear, objective pass/fail check so production decisions can be made quickly and consistently. Durable design that preserves accuracy over time Manufactured from hardened gauge steel, the gauge resists wear and keeps its form under frequent use, which supports long service intervals and consistent results. The modest mass of 0.36 kg makes the device easy to handle while providing the mass needed for stable seating on external threads. Robust construction translates into fewer replacements and steady measurement performance, which protects throughput and lowers lifecycle costs in a production environment. Traceability and workshop integration for smooth logistics The item is supplied with a clear identification and can be integrated into inventory systems via its GTIN and article number, facilitating traceability and stock control. The geometry and marking align with workshop routines for checking external threads and the right‑hand orientation is optimised for standard assemblies. For specification checks or compatibility queries, Metav’s technical advisors are available to recommend the appropriate gauge variants for particular materials or production sequences. For procurement or technical advice on Metav IndustryLine thread gauges, contact Metav Werkzeuge in Emmerich or request tailored guidance from our consultants to ensure the correct gauge for the intended application Technical Data Article number: M315.227.6 GTIN: 4054469126159 Label: Gewinde-Lehrring M27 x 1,5 mm Aussch. DIN 13, f. metr. ISO-Feingewinde,rechts Mass: M27x1,5 Weight: 0.36 kg Facts Thread diameter: M27 Pitch: 1.5 mm Tolerance class: 6g Tariff number: 90173000 Special features Material: Gauge steel, hardened Standard: DIN 13 Thread type: Metric ISO fine thread, right‑hand Categories: Messstifte; Lehren FAQ What is the primary purpose of this gauge? The Thread Ring Gauge M27 x 1.5 is used to verify the conformity of external metric ISO fine threads, providing a quick pass/fail inspection according to DIN 13 and tolerance class 6g. Can this gauge be used for left‑hand threads? No, this ring gauge is manufactured for right‑hand threads and is intended specifically for standard right‑hand external metric ISO fine threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which ensures wear resistance and stability so that dimensional accuracy is maintained over repeated use. How is the gauge identified for stock and procurement? Identification is possible via the article number M315.227.6 and GTIN 4054469126159, which simplifies ordering and traceability in inventory systems. Is this gauge suitable for production quality control? Yes, the ring is designed for shop‑floor and incoming inspection use to provide reproducible checks that support consistent assembly quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M27×3 Thread Go Gauge For Metric ISO Thread Right-Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of precise conformity to DIN 13 (6g) and the robustness of hardened gauge steel for reliable thread verification; benefit from fast, repeatable checks on M27 × 3 mm metric ISO threads and order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge M27 x 3 mm — hardened gauge steel, DIN 13 (6g) | Metav IndustryLine The Thread Ring Gauge M27 x 3 mm is a precision ring gauge for verifying external metric ISO threads; suitable for right‑hand M27 × 3 mm threads in workshop and production inspection. Precision DIN 13 tolerance 6g Hardened gauge steel construction For M27 x 3 mm metric ISO threads Right‑hand thread verification Faster pass/fail checks for serial production The ring gauge enables swift, unambiguous pass/fail control of external threads, reducing inspection time at the workstation. With its conformity to DIN 13 and tolerance class 6g, the gauge provides a clear acceptance criterion for metric ISO threads, helping to cut rework and scrap. The compact ring format allows rapid mounting and removal on threaded parts, supporting efficient in‑process control and final inspection alike. Long service life through hardened construction Manufactured from hardened gauge steel, the device resists wear in repetitive inspection cycles and retains its functional geometry over time. The hardened material combined with careful surface finishing reduces abrasion and preserves the thread profile, so the gauge remains reliable for many inspection routines. This construction supports consistent reproducibility of results and lowers the need for frequent replacements. Designed for workshop and production workflows The gauge is tailored to standard inspection routines for metric ISO threads and integrates easily into existing quality procedures. Marking and traceable identifiers are provided so the item can be logged in inspection schedules; the ring format suits bench testing, pick‑and‑place checks, and quick compliance control across batches. Use within documented inspection plans assists traceability and process stability for machining and assembly operations. Request application guidance or place an order through Metav Werkzeuge; our Emmerich team will advise on suitability for specific production needs and processing times Technical Data Article number: M315.227 GTIN: 4054469126135 TARIC / Customs code: 90173000 Facts Thread size: M27 × 3 mm Tolerance class: 6g Standard: DIN 13 Hand: Right‑hand Special features Material: hardened gauge steel Application: verification of metric ISO external threads Category: thread ring gauge FAQ What thread size does the gauge check? The ring gauge checks M27 × 3 mm external metric ISO threads and is specified for right‑hand threads. Which tolerance and standard apply to this gauge? This Metav IndustryLine ring conforms to DIN 13 with tolerance class 6g, providing a standard acceptance reference. What material is the gauge made from? The gauge is produced from hardened gauge steel, selected for wear resistance and long‑term dimensional stability. Can the gauge be used for production spot checks? Yes — the ring design is intended for rapid pass/fail checks and is suitable for in‑process and final inspection routines. Is traceability information included for quality records? The product includes identifying data suitable for integration into inspection documentation and quality logs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M28 x 2 Thread Ring Gauge Metric ISO Fine Pitch Right Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Benefit from a straightforward verification tool that combines hardened gauge steel, a reliable DIN 13 / 6g tolerance class and the M28 x 2 mm metric ISO fine‑thread specification to keep production checks fast and reproducible; order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Go Ring Gauge M28 x 2 mm – DIN 13, 6g (hardened gauge steel) by Metav IndustryLine The Thread Go Ring Gauge M28 x 2 mm is a right‑hand verification ring for metric ISO fine threads, designed for quick pass/fail inspections in production and quality control. Hardened gauge steel construction For M28 x 2 mm metric ISO fine thread Tolerance DIN 13, 6g for reliable checks Right‑hand go ring gauge Assured conformity for series production The ring is engineered to verify external threads against the DIN 13 tolerance band and the 6g tolerance class, which makes it suitable for routine quality checks and entry control of supplied parts. By providing a clear go/no‑go judgement, the gauge simplifies acceptance procedures and reduces subjective assessment during manual inspection. Constructed from hardened gauge steel, the tool delivers consistent contact geometry and low wear, supporting repeatable results across production runs. The nominal M28 x 2 mm specification is presented in a conventional format to match assembly and inspection documentation. Rapid, repeatable checks at the workplace Designed for shop‑floor use, the verification ring enables fast pass/fail decisions without complex setup or measurement devices. The right‑hand orientation and compact geometry allow operators to perform tactile checks in seconds, lowering cycle time for incoming inspections and in‑process sampling. The gauge’s mass and balance make handling straightforward—suitable for frequent use and minimising operator fatigue—while the robust material preserves thread form under repeated engagement. Traceable tactile inspection with this ring reduces rework and keeps production flow efficient. Durability and integration into quality systems Wear resistance and dimensional stability are core strengths of this verification ring, supporting long service life even under continuous use. The hardened steel body resists abrasion and maintains thread fidelity, reducing calibration drift and downtime for replacement. The tool is appropriate for integration into standard quality routines, such as sampling plans and process control charts; it can serve as a frontline go/no‑go reference in manufacturing, assembly and incoming goods. Where documentation is required, the gauge’s specifications align with common metrology and QA records, aiding traceability and audit readiness. For dependable thread verification choose Metav IndustryLine — contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for technical guidance and prompt supply. Technical data Article number: M315.128.7 GTIN: 4054469124537 SKU: M315.128.7 Core data Thread size: M28 x 2 mm Pitch: 2 mm Nominal diameter: 28 mm Weight: 0.5 kg Special features Material: gauge steel, hardened Tolerance: DIN 13, 6g Function: 'go' ring gauge for metric ISO fine thread, right‑hand Category: gauges / ring gauge FAQ What exactly does a 'go' ring gauge check? A 'go' ring gauge verifies that an external thread falls within the acceptable maximum material limits; the Thread Go Ring Gauge M28 x 2 mm confirms that the thread is producible and within the DIN 13, 6g class. Is this gauge suitable for production use on the shop floor? Yes, the hardened gauge steel construction and compact form make the gauge well suited for frequent shop‑floor pass/fail checks and routine quality control in manufacturing environments. How long does the ring gauge maintain accuracy under normal use? Durability depends on handling and environment; the hardened steel body of this gauge is specified to resist wear and maintain thread geometry for extended periods, supporting reliable tactile inspection over many cycles. Can this gauge be used for left‑hand threads? This particular ring is manufactured as a right‑hand verification tool; left‑hand threads require a correspondingly manufactured left‑hand ring. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M28x1 Limit Thread Go/No-Go Plug Gauge Metric ISO Fine Thread Right-Handed Hardened Gauge, DIN 13 6H - Metav IndustryLine
Combining hardened gauge steel, conformity to DIN 13, 6H and the precise M28 x 1 mm thread form, this limit thread gauge provides repeatable pass/fail verification for production and incoming inspection; procure directly via Metav Werkzeuge or request advice from our technical consultants. Plug gauge M28 x 1 mm (ISO metric fine thread), right-hand — hardened gauge steel, DIN 13 | Metav IndustryLine A plug gauge M28 x 1 mm (ISO metric fine thread), right-hand, intended for fast verification of internal thread conformity in workshop and production inspection environments. Hardened gauge steel construction Designed for M28 x 1 mm ISO fine thread Conforms to DIN 13, tolerance 6H Compact 0.5 kg workshop gauge Ensure correct threads with simple, reliable checks The plug gauge M28 x 1 mm is engineered for straightforward pass/fail testing of internal threads, converting complex tolerance checks into a rapid, binary decision in the workshop or at the inspection bench. By combining a precisely formed M28 x 1 mm thread profile with the DIN 13, 6H tolerance, the gauge eliminates ambiguity during routine controls and reduces the need for time‑consuming measurements. This efficiency supports higher throughput and fewer rework cycles while maintaining documented conformity for quality systems. Durable build for repetitive industrial use Manufactured from hardened gauge steel, the instrument tolerates frequent handling and delivers stable results over many inspection cycles. The hardened material maintains thread geometry under mechanical stress, which preserves the long‑term accuracy of the reference form and reduces measurement drift. At just 0.5 kg, the gauge is compact and easy to position in confined bores, yet substantial enough to feel robust in daily use. Where repeated checks are required, the combination of material and form ensures reproducible outcomes that operators can trust. Designed to streamline inspection workflows Integration of this plug gauge into standard quality processes simplifies operator training and shortens inspection times: a simple engagement indicates compliance to the thread standard, allowing quick sorting of accepted and rejected components. The right‑hand orientation and metric fine‑thread profile suit typical mechanical and assembly applications where M28 x 1 mm is specified. For larger inspection plans, the instrument serves as a first‑line control that complements dimensional measuring equipment, improving overall process control and supporting consistent production quality. Metav’s product range provides matching gauges for adjacent sizes to create coherent inspection sets. Contact Metav Werkzeuge for tailored advice on adopting this Metav IndustryLine plug gauge in production or inspection systems and to arrange supply and technical support Technical data Article number: M315.028.4 GTIN: 4054469122847 Weight: 0.5 kg Size: M28 x 1 mm Facts Tariff code: 90173000 Special features Material: Gauge steel, hardened Standard: DIN 13, 6H Thread orientation: Right-hand Category: Plug gauge (limit thread gauge) FAQ What thread size does this gauge verify? The plug gauge verifies an M28 x 1 mm ISO metric fine thread and is intended for internal thread checks. To which standard does the gauge conform? The instrument is manufactured to the DIN 13, 6H specification for metric threads. What material is used and how durable is it? Constructed from hardened gauge steel, the gauge is designed for repeated use and long‑term dimensional stability. How is the item identified for ordering? Order reference: M315.028.4 (Metav IndustryLine plug gauge for M28 x 1 mm) Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M28x1 Thread Go/No-Go Gauge Metric ISO Fine Right-Handed, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of fast, repeatable thread inspections and the long service life provided by hardened gauge steel; order the gauge directly via Metav Werkzeuge or consult the specialists for application advice. Thread ring gauge M28 x 1 mm (Go/No-Go) — DIN 13, hardened gauge steel The Thread ring gauge M28 x 1 mm is a hardened, Go/No-Go checking ring designed for rapid verification of metric ISO fine threads (right-hand) to DIN 13, tolerance 6g. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M28 x 1 mm metric ISO fine threads Go/No-Go design for fast inspection Fast, reliable acceptance testing for production A Go/No-Go ring delivers immediate, unambiguous results for thread acceptance, reducing inspection time at incoming goods and on the shop floor. Built to DIN standards, the Go/No-Go concept here ensures that a ring marked for acceptance enters with a full-fit check while the no-go side exposes any oversize or out-of-tolerance threads. Conformity to DIN 13 and the 6g tolerance class provides traceable, industry-recognised criteria for quality decisions, making the gauge suitable for repetitive sampling and final part verification in small-batch and series production alike. Durable design that keeps inspection intervals long Constructed from hardened gauge steel, the ring withstands regular use without rapid wear, which helps to maintain measurement reliability and reduces rework or replacement cycles. With a compact mass of 0.37 kg, the tool is easy to handle and manoeuvre for manual checks yet substantial enough to resist accidental deformation during routine use. The mechanical simplicity of a Go/No-Go gauge translates into low maintenance demand: periodic visual inspection and cleaning keep the ring serviceable for years, supporting continuous operation without complex upkeep. Simple integration into quality workflows and traceability The ring supports standardised inspection procedures and can be recorded in inventory and measurement plans via its SKU M315.228.4 and GTIN 4054469126173, easing logistic handling and audit preparation. As a purpose-made tool for metric ISO fine threads with a right-hand lead, it fits incoming inspection, final inspection and process checks where quick decisions are required. Use of hardened, standard-compliant gauges reduces uncertainty in acceptance testing and helps to lower scrap rates, contributing to a leaner production process and steadier throughput. For dependable thread control, specify the Metav IndustryLine thread ring gauge and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for application guidance and procurement support Technical Data Article number: M315.228.4 GTIN: 4054469126173 Weight: 0.37 kg Material: hardened gauge steel Thread: M28 x 1 mm Standard: DIN 13, 6g Tariff number: 90173000 Facts Thread size: M28 x 1 mm Tolerance class: 6g Mass: 0.37 kg GTIN: 4054469126173 Materials & Special features Hardened gauge steel Go/No-Go design For metric ISO fine threads (right-hand) Category: gauges / ring gauge FAQ What material is the gauge made from? The Thread ring gauge M28 x 1 mm is manufactured from hardened gauge steel to provide wear resistance and dimensional stability during repetitive checks. Does this gauge use a Go/No-Go principle? Yes, the ring is a Go/No-Go type, enabling immediate acceptance or rejection decisions for threaded parts. Which standard and tolerance does the gauge conform to? The ring complies with DIN 13 and is produced to the 6g tolerance class for metric ISO fine threads. Is the gauge suitable for right-hand threads only? The tool is intended for right-hand metric ISO fine threads with the dimensions M28 x 1 mm. How should the ring be stored and maintained? Clean the gauge after use, protect it from humidity and mechanical shock, and include it in routine inspection plans to preserve accuracy and service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M28x1 Thread Ring Gauge, Metric ISO Fine Thread Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise, standard-compliant thread checking and robust wear resistance for reliable process control; the hardened gauge steel and DIN 13, 6g tolerance ensure repeatable acceptance testing. Order directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M28 x 1 mm (go) — DIN 13, 6g, hardened gauge steel | Metav IndustryLine A thread ring gauge M28 x 1 mm (go) intended for rapid verification of metric ISO fine threads (right‑hand), suitable for incoming inspection and production control. Certified DIN 13 tolerance class 6g Hardened gauge steel construction For M28 x 1 metric ISO fine threads Right‑hand "go" master for acceptance testing Reliable conformity that reduces rejects The ring functions as a primary go gauge for M28 x 1 mm metric fine threads, providing an immediate pass/fail decision at the assembly line. With the DIN 13, 6g specification it offers a defined acceptance limit, so inspection steps become faster and less subjective than gauging by feel or visual comparison. The clear mechanical result shortens quality checks and helps to reduce downstream rework and scrap, improving throughput and production reliability. Durable construction for long service life Manufactured from hardened gauge steel, the master ring resists wear during frequent handling and repeated engagement with mating parts. The material choice maintains the gauge geometry over many cycles, which minimises drift in acceptance criteria and lowers the need for replacement. The robust build supports regular use in workshop and shop‑floor environments and contributes to a predictable inspection routine. Practical use in quality workflows The right‑hand go configuration is intended for quick verification that threads are within the acceptable upper limits defined by ISO standards. The compact, single‑purpose design makes the gauge easy to store and integrate into incoming inspection stations or final inspection benches. Using a defined master like this enhances traceability of measurement decisions and simplifies documentation of inspection outcomes. Traceability and standard compliance The gauge conforms to recognised thread standards and carries a clear designation of size and tolerance, which assists in process documentation and audit situations. The precise specification and material choice support reproducible checks that align with quality management procedures; this is particularly beneficial where consistent thread conformity is critical to assembly safety and fit. For dependable thread inspection with Metav IndustryLine quality, contact Metav Werkzeuge for supply and technical advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: M315.128.4 GTIN: 4054469124513 Weight: 0.5 kg Material: Gauge steel, hardened Thread: M28 x 1 mm, right‑hand Standard: DIN 13, 6g Core specifications Thread size: M28 x 1 mm Tolerance class: 6g (DIN 13) Mass: 0.5 kg Tariff code: 90173000 Special features "Go" ring for metric ISO fine threads Right‑hand thread checking Hardened gauge steel for wear resistance Category: Gauges / Measuring tools FAQ What is the intended use of this ring gauge? The ring gauge is a go gauge M28 x 1 mm designed for rapid acceptance testing of metric ISO fine threads in incoming inspection and production control. Does the gauge conform to a recognised standard? Yes, the device is specified to DIN 13, tolerance class 6g, providing a standardised acceptance criterion for the relevant thread series. What material is the gauge made from and why does it matter? The master is made from hardened gauge steel, chosen for its resistance to wear so that dimensional stability and repeatability of inspections are preserved over time. Is this gauge for right‑hand or left‑hand threads? This product is a right‑hand go ring, intended specifically for right‑hand metric ISO fine threads with M28 x 1 mm profile. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M28x1.5 Limit Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of precise, repeatable Go/No-Go checking for ISO metric fine threads and the long-term durability of hardened gauge steel; the combination supports consistent quality control and lowers scrap rates. Order the gauge directly via Metav Werkzeuge or consult the Metav specialists for application advice. Limit thread plug gauge M28 × 1.5 — ISO metric fine thread, right-hand, hardened gauge steel A Limit thread plug gauge M28 × 1.5 intended for rapid verification of ISO metric fine internal threads in production inspection and incoming goods control. Limit gauge M28×1.5 for ISO metric fine threads Manufactured from hardened gauge steel Tolerance according to DIN 13, 6H Right-hand thread verification Ensure conformity with a fast Go/No-Go check A precision plug gauge is the quickest way to confirm whether an internal thread meets specification. The Go/No-Go principle provides an immediate pass/fail decision: the Go end should engage freely within the accepted tolerance, while the No-Go must not. Compliance with DIN 13, 6H guarantees compatibility with standard ISO metric fine-thread fittings, reducing the risk of assembly failures and rework. This method delivers reproducible results with minimal training and no complex measuring equipment, improving throughput in quality assurance routines. Durable construction reduces replacement intervals Made from hardened gauge steel, the gauge withstands repeated use on the production floor while keeping wear resistance high and dimensional stability consistent. The robust material and heat treatment maintain the functional limits over many cycles, which lowers life‑cycle costs compared with softer measuring implements. For inspection departments that value long-term reliability, the material choice and precise machining ensure continued conformity checks without frequent recalibration or unscheduled replacements. Simple integration into inspection workflows The plug gauge is designed for direct use in assembly, laboratory and workshop environments where quick decision-making is essential. As a limit thread plug gauge for right-hand threads, it fits common inspection jigs and can be stored alongside other thread gauges for systematic control plans. Traceable identification (GTIN and SKU) supports inventory management and production documentation; when paired with clear acceptance criteria based on the DIN standard, the gauge becomes an efficient tool for maintaining product quality and supplier verification. Speak to Metav Werkzeuge for availability and tailored application advice regarding the M28 × 1.5 limit thread plug gauge—telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M315.028.6 GTIN: 4054469122854 Material: Gauge steel, hardened Thread size: M28 × 1.5 Standard: DIN 13, 6H Weight: 0.5 kg Facts Nominal diameter: 28 mm Pitch: 1.5 mm Weight: 0.5 kg eClass: 21170235 Tariff number: 90173000 Special features Limit (Go/No-Go) thread plug gauge Right-hand ISO metric fine thread Category: Thread gauges / Plug gauges Suitable for inspection and quality control FAQ What is the primary purpose of this thread plug gauge? The limit thread plug gauge is intended for rapid Go/No-Go verification of internal ISO metric fine threads, confirming whether a threaded bore meets the DIN 13, 6H tolerance. Which materials is the gauge made from and why does that matter? This gauge is manufactured from hardened gauge steel, which provides high wear resistance and dimensional stability for repeated inspection cycles. Can this gauge be used on both right‑hand and left‑hand threads? This specific item is designed for right-hand ISO metric fine threads; left‑hand verification requires the corresponding left‑hand gauge. How does the Go/No-Go principle work for internal threads? The Go end must engage the thread without force within the specified tolerance; the No‑Go end must not enter beyond the acceptance limit, providing a clear pass/fail result. Is the gauge suitable for use in serial production quality control? Yes, the plug gauge is optimised for quick repeat checks and integration into production inspection routines to maintain consistent assembly quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M28x1.5 Thread Gauge Ring Metric ISO Fine Right-Hand Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of a robust, standards‑compliant inspection tool that combines hardened gauge steel with the precision of DIN 13, 6g tolerancing to keep production running smoothly. Order the exact Go ring for M28 x 1.5 checks directly via Metav Werkzeuge or consult our specialists for specification matching. Thread Ring Gauge M28 x 1.5 mm (Go) — hardened gauge steel, DIN 13 (Metav IndustryLine) The Thread Ring Gauge M28 x 1.5 mm (Go) is a hardened gauge for fast, repeatable verification of external M28×1.5 ISO fine threads in production and incoming inspection. Go thread ring for M28 x 1.5 ISO fine thread Hardened gauge steel for long-term accuracy Conforms to DIN 13, tolerance class 6g Consistent production control with standards-based checking The Go ring is designed for routine acceptance testing of external metric fine threads and provides an immediate go/no-go decision at the workbench. Built from hardened gauge steel, the ring resists wear and maintains form under frequent use, which translates into fewer measurement-related rejects and less rework. Because the ring follows DIN 13 with tolerance class 6g, it integrates directly into standardised quality workflows and supports traceable process control without guesswork. Practical use in workshop and production environments Intended for right‑hand threads, this Go ring simplifies pass/fail inspection of turned or rolled external threads, making it suitable for series production, final checks and incoming goods inspection. The compact mass of 0.5 kg ensures the tool is easy to handle while still offering the stiffness required for reliable checking. The straight‑forward mechanical acceptance check reduces cycle time compared with elaborate measurement setups, supporting higher throughput and clearer inspection results on the shop floor. Durable construction and straightforward maintenance Manufactured from gauge steel, hardened, the ring offers longevity under normal industrial conditions; routine care is limited to cleanliness and light corrosion protection to preserve the measuring surfaces. The right‑hand orientation and Go‑only function make the gauge an uncomplicated addition to a gauge set where fast, unambiguous results are required. When combined with Metav IndustryLine's product range, the ring contributes to a practical, scalable inspection strategy that keeps quality assurance both affordable and dependable. Choose Metav IndustryLine’s M28 Go thread ring for reliable, standards‑based thread inspection — contact Metav Werkzeuge in Emmerich for availability and technical matching to production requirements at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.128.6 GTIN: 4054469124520 Weight: 0.5 kg Thread: M28 x 1.5 mm Orientation: right-hand Core specifications Tolerance class: 6g Standard: DIN 13 Tariff code: 90173000 Materials & special features Material: gauge steel, hardened Gauge type: Go gauge Manufacturer: Metav IndustryLine FAQ What is the primary purpose of this ring gauge? The ring checks whether external M28 x 1.5 threads meet the acceptance criteria for a Go condition according to DIN 13, enabling quick pass/fail decisions in production. Does the tolerance class 6g indicate a standard metric fit? Yes; tolerance class 6g is a standard ISO metric tolerance for external threads and, combined with DIN 13, defines the dimensional acceptance window used for quality assessment. Is the gauge suitable for right‑hand threads only? The supplied ring is configured for right‑hand metric threads and is intended to verify the Go condition of such external threads. What material is the gauge made from and why does it matter? The ring is manufactured from hardened gauge steel, which provides wear resistance and dimensional stability under frequent inspection cycles. How should the ring gauge be kept between uses? Keep the ring clean, lightly oiled for corrosion protection if required, and store in a stable environment to preserve the measuring surfaces and dimensional integrity. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M28x2 Thread Go Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Taking advantage of DIN 13 (6g) conformity and a hardened gauge steel body, this no‑go ring gauge delivers repeatable rejection testing for right‑hand metric fine threads. Benefit from robust construction and precise M28 x 2 mm thread geometry; order via Metav Werkzeuge or consult our specialists for application guidance. Thread ring gauge M28 x 2 mm (No‑Go) — DIN 13, 6g | Metav IndustryLine A thread ring gauge M28 x 2 mm (no‑go) designed for right‑hand metric ISO fine threads, intended for production quality control and final inspection tasks DIN 13 compliant 6g tolerance Hardened gauge steel construction Right‑hand M28 x 2 mm thread form Designed for rejection testing Reliable rejection control for consistent production quality A dedicated no‑go ring gauge provides an unequivocal check for unacceptable thread sizes. Manufactured to DIN 13 with 6g tolerance, this gauge verifies the maximum acceptable material removal and flags threads that exceed the upper tolerance limit. Using a dedicated rejection gauge simplifies decision‑making on the shop floor: the presence of a positive fit with the no‑go element indicates a non‑conforming part, reducing interpretative error and increasing throughput in repetitive inspection routines. The clear go/no‑go criterion supports traceable quality checks in series production and shortens inspection times. Robust materials and geometry for long service life Made from hardened gauge steel, the ring resists wear and maintains dimensional stability under frequent use. The M28 x 2 thread form is ground to nominal profile, while the hardened substrate protects the calibrated geometry against abrasion during repeated insertions. This construction minimises drift in acceptance limits and extends recalibration intervals, which is particularly valuable where inspection throughput is high. The compact mass and balanced design aid handling and storage without compromising stiffness, so the gauge remains reliable throughout its service life. Fits into established quality workflows and documentation Intended as a component of a complete inspection regime, this ring gauge integrates seamlessly with standard go/no‑go procedures and quality records. The product is supplied with clear identification (SKU and GTIN) to support inventory and traceability; pairing it with the corresponding go gauge completes the acceptance check for metric fine threads. As part of the Metav IndustryLine, the gauge benefits from a European supply chain focused on accessible precision, making precise measurement tools available to workshops and production lines alike. This combination of standard conformity, durable materials and straightforward usability supports efficient in‑house quality assurance. Contact Metav Werkzeuge for tailored application advice on the Metav IndustryLine thread ring gauge M28 x 2 mm — specialists in Emmerich are available to discuss integration into production and inspection plans at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.228.7 GTIN: 4054469126197 Manufacturer: Metav IndustryLine Weight: 0.37 kg Facts Thread size: M28 x 2 Tolerance: DIN 13, 6g Tariff number: 90173000 Special features Material: gauge steel, hardened Right‑hand metric ISO fine thread Intended for rejection testing FAQ What is the purpose of this ring gauge? The thread ring gauge M28 x 2 mm (no‑go) is used to identify threads that exceed the permitted upper tolerance; a positive fit indicates a rejected part when tested against the DIN 13, 6g limit. Is this a go or no‑go gauge? This item is supplied as a no‑go (rejection) ring gauge for right‑hand metric ISO fine threads; it is intended to be used in conjunction with the corresponding go gauge for full acceptance testing. What material and durability can be expected? Manufactured from hardened gauge steel, the gauge is designed for extended service life under frequent use while maintaining dimensional stability and resistance to wear. Does the gauge conform to recognised standards? Yes — the ring gauge is manufactured to DIN 13 and to the 6g tolerance class for metric ISO fine threads, ensuring compatibility with standard inspection protocols. How is the product identified for traceability? Identification is supported by SKU M315.228.7 and GTIN 4054469126197, which simplify inventory control and quality documentation for the Metav IndustryLine ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M28x2 Thread Go/No‑Go Gauge For Metric ISO Fine Thread, Right‑Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Built for repeatable thread verification in production environments, the combination of hardened gauge steel, DIN 13 tolerance class 6H and the M28 x 2 mm pitch gives a durable, standards‑compliant tool; secure the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit thread plug gauge M28 x 2 mm — Metric ISO fine thread, right‑hand (Metav IndustryLine) A limit thread plug gauge M28 x 2 mm designed for quick go/no‑go verification of internal metric ISO fine threads in manufacturing and quality control. Hardened gauge steel construction Conforms to DIN 13 tolerance 6H M28 x 2 mm metric fine thread Right‑hand limit plug gauge Consistent, standards‑based inspection for metric fine threads The limit plug is engineered for direct verification of internal threads, allowing swift go/no‑go decisions on production lines and at inspection stations. Compliance with DIN 13 and the 6H tolerance class ensures measurements follow recognised standards for metric ISO fine thread acceptance. Using a dedicated limit plug reduces interpretation error compared with ad‑hoc measuring methods and supports reproducible quality checks, which is particularly valuable when cycle times and throughput are critical. Durable construction for repetitive use and minimal downtime Manufactured from hardened gauge steel, this inspection plug offers resistance to wear and maintains integrity over repeated engagement cycles. The robust material choice translates into longer service life and fewer replacements, supporting continuous operation in machine shops and assembly lines. The compact, optimised geometry and right‑hand configuration provide reliable seating in the threaded component, delivering repeatable verification without extensive operator adjustment or complex handling. Practical application in production, assembly and quality control The gauge is suitable for inline inspection, batch sampling and final quality checks where metric fine threads must meet specification. As a limit plug for M28 x 2 mm threads, it is a straightforward verification tool for production engineers and quality technicians seeking clear pass/fail results. Integration into process controls supports faster decision making and reduces rework; traceable checks recorded in inspection logs strengthen documentation for audits and customer acceptance. Secure the Metav IndustryLine limit thread plug gauge M28 x 2 mm from Metav Werkzeuge for reliable, standards‑compliant thread inspection or contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.028.7 GTIN: 4054469122861 Material: hardened gauge steel Standard: DIN 13, 6H Mass / thread: M28 x 2 Facts Thread: M28 x 2 mm Tolerance: 6H Weight: 0.5 kg Tariff number: 90173000 Special features Right‑hand thread Limit plug gauge for metric ISO fine thread Robust, hardened construction FAQ What does this limit plug gauge check? The limit thread plug gauge M28 x 2 mm checks internal metric ISO fine threads for conformance to the specified tolerance (DIN 13, 6H), providing a clear go/no‑go verdict. Is the gauge suitable for production use? Yes, the Metav IndustryLine limit plug is designed for repetitive inspection in production and quality control where fast, unambiguous thread verification is required. Which standard and tolerance does it follow? The gauge conforms to DIN 13 with tolerance class 6H, matching the common specification for metric ISO fine threads. What material and durability can be expected? Made from hardened gauge steel, the plug offers high wear resistance and long service life under regular inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M28×1.5 Thread Gauge Ring Three-Point, DIN 13 6g, Right-Handed - Metav IndustryLine
Precision control for M28 × 1.5 metric ISO fine threads is achieved through hardened gauge steel construction and strict adherence to DIN 13, tolerance class 6g; the result is reliable rejection checking for right‑hand threads. Order this limit ring via Metav Werkzeuge or consult the technical team for application advice. Thread ring gauge M28 x 1.5 mm – limit (No‑Go) gauge, DIN 13 6g, Metav IndustryLine A Thread ring gauge M28 x 1.5 mm designed for inspection of metric ISO fine threads to DIN 13, tolerance class 6g, suited to production and incoming inspection for right‑hand threads Hardened gauge steel construction DIN 13 tolerance class 6g For M28 × 1.5 metric fine threads Consistent conformity checks that reduce rework and downtime The limit ring is manufactured from hardened gauge steel, providing wear resistance and dimensional stability under repeated use. Built to DIN 13 with tolerance class 6g, this ring is intended for rejection control in serial production where consistent thread geometry is essential. Using a purpose‑made limit ring eliminates subjective judgement in thread acceptance and shortens inspection time, supporting faster throughput and fewer remakes in the machining cycle. Material and finish that sustain accuracy Heat treatment and finishing processes produce a surface and core hardness that maintain the gauge form over many cycles. The gauge steel, hardened construction minimises profile wear and ensures the internal thread form remains within specification, which is crucial for repeatable thread inspection results. A stable material base reduces the need for frequent replacement and preserves measurement certainty, thereby lowering total cost of ownership for inspection tooling. Designed for shop‑floor use and easy integration into quality routines The ring serves as a clear go/no‑go reference in a production environment: fitting or not fitting provides an immediate pass or reject decision for M28 x 1.5 threads. The compact, ergonomic shape and the right‑hand thread orientation make it straightforward to use at a bench or inline station. Marking and SKU engraving facilitate traceability in inspection records and stock management, supporting audit trails and quality documentation without additional measuring steps. For robust, repeatable thread control rely on Metav IndustryLine quality — contact Metav Werkzeuge in Emmerich for procurement details or specific application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.228.6 GTIN: 4054469126180 Material: hardened gauge steel Mass / Size: M28 x 1.5 mm Weight: 0.37 kg Standard: DIN 13, 6g Facts Thread nominal diameter: 28 mm Thread pitch: 1.5 mm Weight: 0.37 kg Tariff code: 90173000 Special features Right‑hand metric ISO fine thread Function: No‑go (reject) limit ring gauge Category: Gauges (thread gauges) Robust, hardened construction for production use FAQ What is the intended use of this ring gauge? This limit ring gauge is intended for rejection control of M28 x 1.5 metric ISO fine threads in production and incoming inspection, providing a quick go/no‑go decision. Does the gauge comply with recognised standards? Yes, the gauge is manufactured to DIN 13 with tolerance class 6g, ensuring compatibility with standard metric ISO fine thread specifications. Which materials is the gauge made from and how does that affect service life? The ring is made from hardened gauge steel; the heat‑treated material and finish improve wear resistance and extend service life under routine inspection cycles. Is this a Go or No‑Go gauge, and how should it be used? The product functions as a No‑Go (reject) or limit ring; absence of fit indicates the thread is out of tolerance and requires corrective action. Can the Metav IndustryLine thread ring gauge be traced in quality records? Yes, the item is supplied with manufacturer markings and SKU M315.228.6 for traceability in inspection logs and part control documentation. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2x0.35 Thread Go/No-Go Plug Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Reliable verification of fine metric threads is achieved by the combination of hardened gauge steel, the DIN 13 tolerance class 6H and the precise M2 × 0.35 pitch. Order the limit gauge directly via Metav Werkzeuge or consult our specialists for integration into inspection routines. Limit thread plug gauge M2 x 0.35 (right-hand) — hardened gauge steel, DIN 13 6H (Metav IndustryLine) The Limit thread plug gauge M2 x 0.35 is a compact Go/No-Go instrument for fast verification of metric ISO fine threads in precision engineering and small-component production. Hardened gauge steel construction Complies with DIN 13, tolerance 6H For M2 x 0.35 metric fine threads Accurate in-process control for small threads The plug gauge is designed for dependable, repeatable checks of fine metric threads, offering a straightforward means to confirm conformity on production lines or at inspection benches. Thanks to the M2 × 0.35 specification and the 6H tolerance class, this limit gauge provides unambiguous Go/No‑Go results that reduce interpretation errors and speed up quality decisions. The compact form factor supports rapid checks on small assemblies and prevents bottlenecks in high-mix, low-volume workflows. Robust construction that keeps measurement drift low Manufactured from hardened gauge steel, the tool maintains its geometry under routine handling and resists wear that would otherwise introduce uncertainty. The material choice and heat treatment extend service life and preserve the defined thread profile, so the gauge remains a reliable reference between calibrations. Using a dedicated metal like this minimises maintenance overhead and supports consistent inspection intervals, ultimately protecting component quality and reducing rework. Simple compliance and traceability for quality systems Conforming to DIN 13 and the widely used 6H tolerance ensures compatibility with established engineering standards and simplifies documentation for audits. The plug gauge is ready to be integrated into quality control plans, allowing clear pass/fail decisions at the point of inspection. Its compact design and low mass make it easy to handle in tooling sets or inspection kits, while the clear, standardised specification aids traceability in manufacturing records. Contact Metav Werkzeuge in Emmerich to discuss how this Metav IndustryLine limit gauge can streamline thread inspection and to request a specification sheet or quotation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.002.1 GTIN: 4054469121987 Brand: Metav IndustryLine Mass / Size: M2 x 0.35 Weight: 0.02 kg Material: gauge steel, hardened Standard: DIN 13, 6H Numbers / Core technical data Thread nominal diameter: 2 mm Thread pitch: 0.35 mm Tolerance class: 6H Weight: 0.02 kg Customs tariff number: 90173000 Special features / Versions Right-hand metric ISO fine thread Limit (Go/No‑Go) plug gauge function Compact, low-mass construction suitable for small components For use in production and inspection environments FAQ What is the primary use of this plug gauge? The limit thread plug gauge M2 x 0.35 is used for Go/No‑Go verification of metric ISO fine threads, offering quick pass/fail checks during production and incoming inspection. Which standard does the gauge comply with? This Metav IndustryLine limit gauge is specified to DIN 13 with a tolerance class of 6H, ensuring compatibility with common engineering requirements. Can the gauge be used on both right-hand and left-hand threads? This particular tool is manufactured for right-hand threads; left-hand versions are available separately if required for special applications. How durable is the gauge in daily use? Made from hardened gauge steel, the gauge resists wear under normal inspection routines, maintaining profile accuracy and extending intervals between reconditioning. Is the gauge suitable for automated inspection stations? The compact, standardised geometry of the plug gauge supports integration into manual and semi-automated inspection setups where a physical Go/No‑Go check is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2x0.4 Limit Thread Plug Gauge Metric ISO Regular Thread Right-Hand DIN 13 6H Hardened Gauge Steel - Metav IndustryLine
Take advantage of rapid, repeatable thread inspection with a limit thread plug gauge manufactured from hardened gauge steel to DIN 13 tolerance 6H, sized M2 x 0.4 for right‑hand metric ISO threads; order directly via Metav Werkzeuge or ask the consultants for application guidance. Limit thread plug gauge M2 x 0.4 — Right‑hand metric ISO, Metav IndustryLine (M315.002) Limit thread plug gauge M2 x 0.4 provides a compact, shop‑ready solution for verifying small metric ISO threads in production and inspection environments Metric ISO M2 x 0.4 right‑hand thread Hardened gauge steel construction Manufactured to DIN 13, tolerance 6H Lightweight 0.02 kg for fast handling Consistent pass/fail inspection for miniature threaded parts The limit thread plug gauge is a pragmatic solution for direct go/no‑go checking of small metric threads. Designed for the M2 x 0.4 size, the gauge gives an immediate rational verification of thread conformity to DIN 13 with tolerance class 6H, which reduces measurement ambiguity and shortens inspection time. Using a hard, dimensionally stable tool instead of repeated measurements on micrometres or optical comparators saves operator time and cuts rework rates, making quality control more efficient across small‑series production and final inspection tasks. Durable construction for repeatable measurements Made from hardened gauge steel, this plug gauge resists wear and maintains its calibrated dimensions through numerous checks. The material choice ensures long‑term stability and repeatability, which is particularly relevant for high‑throughput inspection stations where frequent verification is required. The low mass of 0.02 kg contributes to easier handling during rapid checks while the robust hardening process preserves the functional profile so that limit decisions remain reliable over time. Practical suitability and integration into inspection routines Compact and uncomplicated in use, the gauge supports quick decision workflow on the shop floor: the go side confirms acceptable thread form and pitch, while the no‑go side detects oversize or out‑of‑tolerance conditions without elaborate setup. The instrument is tailored to the metric ISO thread system and right‑hand applications, making it suitable for electronics, precision engineering and small fastener assemblies. Its straightforward functionality complements digital record systems and manual logging alike, enabling a balance of speed and traceability in quality processes. For consistent, traceable thread inspection choose the Metav IndustryLine limit thread plug gauge (M315.002) — contact Metav Werkzeuge for ordering assistance and process recommendations. Technical data Article number: M315.002 GTIN: 4054469121970 Material: hardened gauge steel Standard: DIN 13, 6H Thread size: M2 x 0.4 Weight: 0.02 kg Tariff number: 90173000 Facts Thread designation: M2 × 0.4 Tolerance class: 6H Standard reference: DIN 13 Mass: 0.02 kg GTIN/EAN: 4054469121970 Special features Right‑hand metric ISO thread checking Limit (go/no‑go) plug gauge principle Hardened gauge steel for wear resistance Category: gauges / measuring pins SKU: M315.002 FAQ What is the primary use of this gauge? The limit thread plug gauge M2 x 0.4 (M315.002) is intended for quick go/no‑go verification of right‑hand metric ISO threads during production and inspection. Does the gauge comply with recognised standards? Yes, the tool is produced to DIN 13 with tolerance class 6H, ensuring compatibility with standard thread specifications. Which material is the gauge made from and why does it matter? Manufactured from hardened gauge steel, the gauge offers wear resistance and dimensional stability, which preserves measurement reliability across repeated use. Can this gauge be used for left‑hand threads or other sizes? This specific item is for right‑hand M2 x 0.4 threads; alternative sizes or left‑hand versions must be selected accordingly. How does the limit function speed up inspection? The go/no‑go design delivers an immediate conformity decision, reducing measurement time and lowering the risk of interpretation errors compared with multiple detailed measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2–30mm Thread Go/No-Go Plug Gauge Set Metric ISO Regular Thread DIN 13 6H Hardened Gauge Steel In Case - Metav IndustryLine
Product data contains contradictory information regarding the item's quality and inspection status. This inconsistency raises concerns about the reliability of the available details and highlights the need for further clarification. Please verify the source data thoroughly to ensure accuracy and consistency. Without proper validation, it is not possible to proceed with creating a product description that meets the required standards. Ensuring the integrity of the data is essential for producing a description that accurately reflects the item's characteristics and inspection outcomes. Therefore, a detailed review of the source data is strongly recommended before moving forward with the process.
M3 x 0.35 Thread Go Ring For Metric ISO Fine Thread Right-Handed Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Precise, durable and standards‑compliant: the thread ring gauge combines hardened gauge steel, the DIN 13 tolerance class 6g and an M3 x 0.35 profile to provide reliable right‑hand metric thread verification. Its low mass and compact form enable fast, repeatable inspections on the shop floor. Order the gauge directly via Metav Werkzeuge or consult the specialists for application guidance. Thread ring gauge M3 x 0.35 mm (DIN 13, 6g) — Metav IndustryLine A Thread ring gauge M3 x 0.35 mm for quick verification of right‑hand metric ISO fine threads in production and quality inspection. Hardened gauge steel construction DIN 13 tolerance, 6g fitting For M3 x 0.35 metric fine thread Right‑hand thread checking Consistent conformity checks for production The ring offers a compact, process‑oriented solution for thread verification that aligns with common workshop and production requirements. Built to conform with DIN 13 and the 6g tolerance band, this gauge enables efficient acceptance testing and routine quality checks. The design supports fast tactile verification of external threads, reducing inspection time while maintaining traceability within documented production workflows. Durable construction for repeatable use Manufactured from hardened gauge steel, the component is engineered for longevity under repeated engagement. The material choice and heat treatment yield high wear resistance and dimensional stability, so checks remain dependable over many cycles. Its low mass (approx. 0.01 kg) and compact geometry make handling straightforward during serial inspection or when integrated into a set of workshop gauges. Practical integration into inspection routines The compact profile and standardised thread form simplify inventory and process standardisation across machining, assembly and maintenance tasks. The gauge is suitable for inclusion in inspection sets and can be used alongside other measurement devices to document conformity. Clear product identifiers (SKU M315.203.1 and GTIN) support traceability and easy reorder within a procurement system, ensuring consistent tool supply for ongoing quality control. Contact Metav Werkzeuge for tailored advice on using the Metav IndustryLine thread ring gauge in production environments or to place an order for reliable DIN 13, 6g verification. Technical Data Article number: M315.203.1 GTIN: 4054469125367 Category: Gauges — thread ring gauge Facts Thread: M3 x 0.35 Weight: 0.01 kg Tariff number: 90173000 Standard: DIN 13, tolerance 6g Special features Material: hardened gauge steel Right‑hand thread Compact, low‑mass design Eclass: 21170214 FAQ What is this gauge used for? This thread ring gauge M3 x 0.35 mm is used to verify conformity of right‑hand metric ISO fine external threads to DIN 13 with tolerance class 6g. Is the gauge suitable for production inspection? Yes. The Metav IndustryLine ring gauge M3 x 0.35 mm is intended for routine production and workshop checks where quick, repeatable verification is required. What material is the gauge made from? The ring gauge is manufactured from hardened gauge steel, chosen for wear resistance and long service life. How is the product identified for reordering? Reorder using article number M315.203.1 or GTIN 4054469125367 to ensure the same Metav IndustryLine specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3 x 0.5mm Thread Gauge Ring Right-Hand ISO Metric, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 conformity, hardened gauge steel construction and compact handling to secure repeatable thread inspections. Order the inspection tool directly via Metav Werkzeuge or request specialist advice from the Metav team for seamless integration into quality control routines. Thread gauge ring M3 x 0.5 mm (Metav IndustryLine) — Hardened gauge steel, DIN 13 (6g) Thread gauge ring M3 x 0.5 mm is a right‑hand inspection ring for metric ISO general‑purpose threads, designed for fast verification of small‑pitch components in production and quality control Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Right‑hand M3 x 0.5 metric thread Compact 0.1 kg inspection ring Reliable conformity for small‑pitch thread checks The ring is manufactured to DIN 13 with a 6g tolerance, which provides a verifiable basis for pass/fail inspections of metric ISO threads. Using a dedicated thread ring simplifies acceptance procedures: the geometry of the gauge ensures that a mating screw either engages correctly or is identified as non‑conforming, reducing rework and scrap rates. This standardised approach supports reproducible assessments across shifts and machines, helping to maintain batch conformity and traceability. Tough materials and compact handling for daily use Made from hardened gauge steel, the inspection ring resists wear under repeated engagement cycles, which preserves its dimensional integrity over time. The compact mass (approx. 0.1 kg) and small footprint suit bench inspection and assembly‑line checks, allowing operators to handle the component easily without special fixturing. Robust material choice combined with a concise format reduces the need for frequent replacement and contributes to lower lifecycle costs in routine inspection environments. Practical integration into quality workflows The inspection ring is identified as SKU M315.203 and carries GTIN 4054469125350, enabling straightforward inventory and traceability within quality management systems. Its right‑hand M3 x 0.5 geometry addresses common small‑pitch thread applications in electronics, small‑part assembly and precision fastening. As part of a disciplined inspection routine, the ring supports quick go/no‑go decisions and can be logged alongside batch records to document conformity. Metav’s supply from Emmerich acts as a quality filter for the European market, ensuring consistent product availability and reliable sourcing for workshops and production facilities. For technical advice, availability or delivery from the Metav warehouse in Emmerich, contact Metav Werkzeuge — the team will advise on the best inspection strategy and supply options for the M315.203 thread gauge ring Technical Data Article number: M315.203 GTIN: 4054469125350 SKU: M315.203 Facts Weight: 0.1 kg Thread size: M3 x 0.5 mm Tariff code: 90173000 Standard: DIN 13, tolerance 6g Special features Material: hardened gauge steel Right‑hand metric ISO thread Category: Gauges / Lehren Intended for inspection of metric ISO general‑purpose threads FAQ What thread size does this gauge check? The thread gauge ring checks M3 x 0.5 mm metric ISO general‑purpose threads; it is produced to DIN 13 with tolerance 6g and is listed as SKU M315.203. What material is the ring made from? The ring is made of hardened gauge steel, which provides wear resistance and stability for repeated inspections of small‑pitch threads. Is this a right‑hand or left‑hand gauge? This inspection ring is a right‑hand metric thread gauge intended for standard ISO‑metric threads. Is a calibration certificate supplied with the gauge? No specific calibration certificate is indicated for this article; if an accredited calibration (for example ISO 17025) is required, please enquire with Metav Werkzeuge for available calibration services. How is the ring typically used in a quality process? The ring is used as a go/no‑go inspection device for threaded parts: engagement indicates conformity to the M3 x 0.5 DIN 13 specification, while resistance or misfit identifies non‑conforming items for rework or rejection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3.5x0.35 Thread GO Ring Metric ISO Fine Right-Hand Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
Take advantage of a simple, robust inspection tool that combines fast go/no-go checking with DIN 13 traceability and hardened construction for long service life; order the gauge via Metav Werkzeuge or consult our specialists for suitability in production or inspection tasks. Go ring gauge M3.5 x 0.35 — Go thread ring gauge, hardened gauge steel, DIN 13, 6g The Go ring gauge M3.5 x 0.35 is a compact precision aid for checking metric fine threads, designed for quick in-process checks and final inspection of right‑hand ISO metric threads Hardened gauge steel for long service life Conforms to DIN 13 with 6g tolerance Precision fit for M3.5 x 0.35 metric threads Lightweight 20 g for easy handling Fast, reliable thread inspection for production and QA A dedicated go ring gauge like this provides an immediate, unambiguous decision in production: pass or fail. The gauge is specified for M3.5 x 0.35 fine threads and manufactured to DIN 13 with a 6g tolerance, so it aligns with common ISO metric thread tolerancing used across machining and assembly operations. Because the tool embodies a single, certified limit, it eliminates interpretative measurement steps and speeds up line inspections, reducing rejected parts and rework while improving throughput and process reliability. Durable construction that reduces service interruptions Made from gauge steel and hardened for wear resistance, the ring is built to withstand repeated use in workshop and shop‑floor environments. Its low mass (approximately 0.02 kg) and compact form factor make it easy to handle and store, while the hardened surface preserves the calibrated limit over many inspection cycles. The material choice and heat treatment translate into predictable lifetime performance, lowering the frequency of replacements and supporting consistent quality control rhythms. Clear standards and versatile application range This ring gauge is intended for ISO metric fine threads and is right‑hand in orientation, matching standard machining outputs. Its designation and adherence to DIN 13 permit straightforward documentation in inspection plans and traceability records. Typical applications include incoming goods inspection, in‑process control at machining centres, final assembly checks and jigs where quick verification of thread acceptability avoids costly assembly faults. The product is listed under gauge equipment and integrates easily into standard gaging assortments. Practical benefit: simple use, immediate decisions As a single‑limit gauge, the device requires no reading skills—if the gauge enters the thread freely, the part is acceptable; if it does not, the component requires further evaluation. This simplicity supports lean inspection routines and is particularly suited to small‑batch manufacturing, repair workshops and quality benches where speed and repeatability matter. The ring’s modest footprint also makes it a practical addition to portable inspection kits or fixed check stations. For procurement advice or to arrange supply of the Metav IndustryLine go ring gauge, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com for prompt guidance and delivery options Technical Data Article number: M315.103.6 GTIN: 4054469123714 Manufacturer: Metav IndustryLine Data Thread designation: M3.5 x 0.35 Tolerance: 6g (DIN 13) Weight: 0.02 kg Special features Material: gauge steel, hardened Type: Go ring gauge for ISO metric fine threads, right‑hand Category: Gauge (Lehre) FAQ What exactly does "go" mean for this ring gauge? The term "go" indicates that the ring is a single‑limit gauge intended to verify acceptable thread size; the Go ring gauge M3.5 x 0.35 must enter an acceptable thread freely to confirm conformity. Which tolerance standard does this gauge follow? This ring gauge is manufactured to DIN 13 and specified with a 6g tolerance suitable for ISO metric fine threads. Can this gauge be used on left‑hand threads? No, the ring is a right‑hand tool and is intended only for right‑hand ISO metric fine threads as supplied. Is the material suitable for repeated shop‑floor use? Yes, the gauge is made from hardened gauge steel, selected to resist wear from repeated use and maintain dimensional stability. What is the article number for ordering and identification? The article number for ordering is M315.103.6; this identifies the Metav IndustryLine go ring gauge for M3.5 x 0.35. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3.5x0.35 Thread Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Precise verification of M3.5 × 0.35 ISO fine threads, combined with hardened gauge steel and conformity to DIN 13, 6g, delivers reliable inspection results for production and quality control environments. The compact, low‑mass design minimises handling effort while resisting wear during repetitive checks. Order the Thread ring gauge M3.5 x 0.35 mm directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M3.5 x 0.35 mm — hardened gauge steel, DIN 13 (Metav IndustryLine) The Thread ring gauge M3.5 x 0.35 mm is a hardened ring gauge intended for verification of external ISO fine metric threads (right‑hand), suitable for workshop inspection and production line checks. DIN 13, tolerance 6g Hardened gauge steel For M3.5 × 0.35 fine metric threads Compact, approx. 0.1 kg Ensure compliance with international thread tolerances The ring gauge supports efficient conformity checks by referencing DIN 13 and the 6g tolerance band, which is commonly used for fine metric external threads in mechanical assemblies. Using a dedicated ring gauge reduces interpretation error compared with visual or ad‑hoc methods because the gauge provides a direct form and fit comparison: if the external thread fits the gauge within the specified class, dimensional compliance is confirmed. The hardened construction keeps the master profile stable over many cycles, helping to maintain consistent acceptance criteria in serial production. Long service life and consistent measurement behaviour Manufactured from hardened gauge steel, the tool offers high resistance to abrasion and profile deformation, which preserves the reference geometry under repeated use. The compact mass and solid profile minimise thermal and mechanical distortion during handling, ensuring that the nominal profile remains unchanged between inspections. This durability translates into fewer replacements, lower maintenance effort and predictable inspection intervals for workshop and production quality routines. Practical integration into inspection workflows As a simple, robust inspection instrument, the gauge streamlines pass/fail assessment of external fine threads and accelerates routine sampling on the shop floor. Its small footprint and light weight make it suitable for bench work as well as integration in small test fixtures where quick tactile verification is required. By using a purpose‑made ring gauge, technicians can reduce rework and scrap through rapid, repeatable checks that complement dimensional control plans and quality documentation. Contact Metav Werkzeuge today for expert advice on the Thread ring gauge M3.5 x 0.35 mm and to secure consistent, repeatable thread inspection from our Emmerich centre Technical Data SKU: M315.203.6 GTIN: 4054469125381 Manufacturer: Metav IndustryLine Numbers / Core technical data Weight: 0.1 kg Thread size: M3.5 × 0.35 mm Tolerance class: 6g Tariff code: 90173000 Special features Material: hardened gauge steel Norm: DIN 13 Orientation: right‑hand metric fine thread Category: Gauges / Ring gauge FAQ How does this ring gauge check thread conformity? The ring gauge verifies external thread form and fit by providing a precise mating profile: if the external thread engages within the specified tolerance band of the Thread ring gauge M3.5 x 0.35 mm, dimensional conformity to DIN 13, 6g is confirmed. Which standard and tolerance does the gauge support? The tool is manufactured to the DIN 13 specification and corresponds to the 6g tolerance class for fine metric external threads. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for wear resistance and stability; this preserves the reference profile during repetitive use and extends service life. Is the gauge suitable for left‑hand threads? This ring gauge is specified for right‑hand metric fine threads; left‑hand applications require a suitably oriented gauge. What are the SKU and weight of the product? The product is listed as SKU M315.203.6 and has a weight of 0.1 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3.5x0.35mm Go/No-Go Thread Plug Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Robust hardened gauge steel, conformity to DIN 13 (6H) and a compact fine‑thread size combine to deliver rapid, repeatable go/no‑go checks on small metric threads; order the limit thread plug directly via Metav Werkzeuge or consult our advisers for application guidance. Limit thread plug M3.5 x 0.35 mm — right‑hand, ISO fine thread (Metav IndustryLine) The Limit thread plug M3.5 x 0.35 mm is a precision go/no‑go gauge for verifying metric ISO fine threads in production and incoming inspection; designed for quick pass/fail checks on right‑hand threads. Right‑hand metric thread M3.5 x 0.35 DIN 13 tolerance 6H for standard conformity Hardened gauge steel for long service life Compact design, only 0.03 kg for easy handling Fast, repeatable go/no‑go inspection for fine threads A limit thread plug is the most efficient tool for immediate acceptance decisions on threaded parts. The go/no‑go principle eliminates guesswork: the "go" end confirms the minimum material and thread form, while the "no‑go" end detects oversize or defective threads. Conformity with DIN 13 and 6H tolerance ensures compatibility with standard metric fine threads, so checks are directly comparable across suppliers and batches. The gauge’s M3.5 x 0.35 mm geometry addresses applications where compact fasteners demand reliable verification without complex measurement setups. Minimise downtime with compact, durable design Engineered from hardened gauge steel, the plug resists wear under repeated use, extending service life and maintaining dimensional stability. The compact form factor and low weight (approx. 0.03 kg) allow operators to carry out inspections at the machine or on the shop floor without dedicated fixtures, accelerating throughput in small‑batch and series production. Faster inspection cycles translate into fewer interruption‑driven delays and a clearer, more efficient quality workflow — a pragmatic investment in process reliability. Practical handling and workshop compatibility The right‑hand orientation and standard metric profile make this gauge suitable for a wide range of components that conform to ISO fine‑thread specifications. Its small form supports handheld checks and rapid assessment of assemblies, threaded inserts and fasteners used in precision assemblies. Because the tool is a limit gauge rather than a measuring instrument, it simplifies decision processes: acceptance is immediate when the "go" end passes; rejection is immediate when the "no‑go" end engages, helping teams maintain consistent quality criteria without lengthy interpretation. Trusted standards and industry fit Designed for routine quality control and incoming inspection, the plug sits neatly within a standards‑based QA regime. Use of an ISO‑aligned profile offers traceability in audits and supplier qualification procedures. Metav IndustryLine supplies this limit thread plug as part of a broader offering of precision gauges and workshop supplies, reflecting Metav’s role as a quality filter for the European market and its commitment to making exacting measurement tools accessible for workshops and industrial users alike. Contact Metav Werkzeuge to discuss suitability for specific assemblies or to request application advice for the Metav IndustryLine limit thread plug M315.003.6 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.003.6 GTIN: 4054469122045 Manufacturer: Metav IndustryLine Facts Thread size: M3.5 x 0.35 mm Tolerance/standard: DIN 13, 6H Weight: 0.03 kg Tariff number: 90173000 Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Category: limit thread plug / gauge for go/no‑go checks Suitable for production and incoming inspection FAQ What is the primary purpose of this gauge? The limit thread plug M3.5 x 0.35 mm is intended for rapid go/no‑go verification of metric ISO fine threads, enabling immediate pass or fail decisions during production or incoming inspection. Which standard does the gauge conform to? The plug complies with DIN 13 and is manufactured to the 6H tolerance class for metric fine threads, ensuring standardised acceptance criteria. Can the gauge be used on a shop floor without fixtures? Yes — the compact design and low weight make handheld checks practical; the plug is suitable for on‑machine or bench inspection where quick acceptance tests are required. How does the go/no‑go principle work with this gauge? The "go" end should engage cleanly if the thread meets minimum material and form requirements; the "no‑go" end must not fully enter a conforming thread, which indicates oversize or defective threads when it does. Is this gauge intended for right‑hand or left‑hand threads? This specific plug is manufactured for right‑hand metric ISO fine threads with the M3.5 x 0.35 profile. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com