Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M33x1 Thread Ring Gauge Go Metric ISO Fine Right-Handed Hardened Gauge DIN 13, 6g - Metav IndustryLine
A compact, hardened gauge-steel go ring that checks M33 x 1 mm metric ISO fine threads to DIN 13 (6g), providing rapid pass/fail inspection and long-term dimensional stability; order the thread ring gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Thread ring gauge M33 x 1 — go ring gauge for metric ISO fine threads, DIN 13, 6g (Metav IndustryLine) The thread ring gauge M33 x 1 is a precision go gauge designed for quick verification of metric ISO fine external threads (right-hand), suited to production and incoming inspection environments. Go ring gauge M33 x 1 mm, metric ISO fine thread Manufactured to DIN 13 tolerance class 6g Hardened gauge steel for long-term stability Suitable for production and workshop inspection Rapid, unambiguous thread acceptance for production control A dedicated go ring provides immediate quality decisions by confirming whether an external thread meets the required form and fundamental dimensions. Manufactured to DIN 13 with tolerance class 6g, this gauge is intended for metric ISO fine threads and enables straightforward pass/fail testing without complex measurement setups. The result is a reduction in inspection time and fewer ambiguous non-conformances during routine checks, which supports faster throughput and more consistent assembly processes. Durable construction that preserves calibration and repeatability Constructed from hardened gauge steel, the ring is resistant to wear and maintains its functional limits over many cycles, ensuring repeatable checks in a production setting. The compact mass of 0.69 kg makes handling convenient while still delivering sufficient rigidity for reproducible seating on the workpiece. The right-hand thread form and precise M33 x 1 mm profile are produced to tight tolerances to reduce false rejects and extend the service life of the gauge in daily inspection routines. Practical inspection workflow and traceable documentation The ring is used as a tactile verification tool within standard go/no-go procedures: the part must fully engage the go ring without excessive force to be accepted. Integration into existing metric inspection routines is straightforward, and the gauge is suitable for inline use on production lines or as part of final quality control. Traceability is supported by the clear article identification and GTIN, facilitating stock control and audit processes in regulated manufacturing environments. Secure consistent thread inspection with the Metav IndustryLine ring gauge — contact Metav Werkzeuge for suitability advice or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M315.133.4 GTIN: 4054469124629 Weight: 0.69 kg Material: hardened gauge steel Thread size: M33 x 1 mm Type: go (gut) ring gauge Thread direction: right-hand Standard: DIN 13, 6g Facts Thread pitch: 1 mm Tolerance class: 6g Tariff code: 90173000 Category: gauges Features Hardened gauge-steel construction Designed for metric ISO fine threads Go/no-go inspection use Intended for production and workshop environments FAQ What does "go" mean for this ring gauge? A go ring permits an acceptable external thread to fully engage; the thread ring gauge M33 x 1 is a go gauge manufactured to the acceptance limit defined by DIN 13, 6g Can this gauge be used on non-metric threads? No, this ring is specified for metric ISO fine threads with a profile and pitch of M33 x 1 mm and is not suitable for imperial or other thread systems How is the material of the gauge described and why is it important? The ring is made from hardened gauge steel, which provides wear resistance and dimensional stability so that the gauge keeps its limits over many inspection cycles Is the ring suitable for inline production inspection? Yes, the compact design and robust construction of this go ring make it appropriate for both inline production checks and workshop quality control How should parts be checked with the ring during acceptance testing? The external thread should engage the go ring smoothly to the seating point defined by the gauge; any interference or inability to fully engage indicates non-conformance Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33x1.5 Thread Ring Gauge For Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of DIN 13 tolerance class 6g, hardened gauge steel construction and a precise M33 x 1.5 pitch to ensure reliable rejection of non-conforming threads; order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M33 x 1.5 mm — No-go, DIN 13, Metav IndustryLine A no-go thread ring gauge designed for verification of M33 x 1.5 metric ISO fine threads in right-hand form, offering a compact, robust solution for pass/fail inspection in production and quality control. Hardened gauge steel construction DIN 13 tolerance class 6g For M33 x 1.5 metric fine thread No-go ring gauge, right-hand thread Ensure conformity with standardised thread inspection The no-go ring provides a straightforward, repeatable method to identify threads that do not meet specification. Built to DIN 13 with tolerance class 6g, this gauge assesses whether an internal thread exceeds acceptable limits and therefore should be rejected. Using a dedicated no-go ring removes subjective judgement from routine checks and speeds up decision-making on the shop floor, improving throughput while reducing the risk of faulty assemblies entering the next production stage. Robust materials and geometry for long-term accuracy Constructed from hardened gauge steel, the ring offers wear resistance and dimensional stability under frequent handling. The nominal size M33 x 1.5 denotes the thread diameter and pitch for fine metric ISO threads; the right-hand orientation matches standard fastener forms. The gauge’s mass of 0.49 kg contributes to a solid feel and stable seating in use, which helps maintain repeatable contact conditions and reduces measurement scatter over time. Practical integration into production and inspection routines Designed for direct use in production control, the no-go ring simplifies go/no-go decisions without additional measurement equipment. As a dedicated rejection gauge, it complements other thread inspection tools and can be incorporated into first-article inspection, in-process checks or final acceptance testing. The clear specification and robust construction minimise downtime for replacement and allow quality teams to document conformity consistently, supporting traceability and audit requirements. Contact Metav Werkzeuge GmbH in Emmerich for technical matching, supply options and fast delivery of Metav IndustryLine thread gauges Technical Data Article number: M315.233.6 GTIN: 4054469126296 ECLASS: 21170214 Tariff number: 90173000 Facts Thread size: M33 Pitch: 1.5 mm Weight: 0.49 kg Special features Material: hardened gauge steel Standard: DIN 13, 6g Thread form: metric ISO fine thread Orientation: right-hand Type: no-go (reject) ring gauge FAQ What is the intended use of this ring gauge? The no-go thread ring gauge M33 x 1.5 mm is intended for pass/fail inspection of internal threads to identify threads that exceed permissible dimensions under DIN 13. Does the gauge match standard metric ISO threads? Yes, the gauge is manufactured for metric ISO fine threads with a pitch of 1.5 mm and tolerance class 6g, suitable for standard right-hand components. What material is the ring made from and why does it matter? The ring is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure long-term repeatability in routine inspections. How is this gauge integrated into quality control workflows? As a dedicated no-go ring, the product enables rapid go/no-go checks during first-article inspection, in-process control and final acceptance, reducing subjectivity and speeding up decision-making. Which article and product identifiers are relevant for ordering? Refer to article number M315.233.6 and GTIN 4054469126296 when ordering the Metav IndustryLine no-go ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33x2 Thread Limit Go/No-Go Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The supplied product data contains contradictory quality information: the item is simultaneously marked as rejected and as in good condition. This inconsistency prevents the creation of a reliable, standards‑compliant product description, since it is unclear whether the gauge is serviceable, requires rework or must be treated as scrap. Please clarify the actual inspection status and confirm any missing conformity or calibration details (for example, whether a calibration certificate is supplied and which standard applies). Once the quality status is resolved and the data set amended, a complete technical description, application guidance and supplier information can be produced promptly. For rapid processing, provide the corrected condition along with any relevant certificates or inspection notes.
M33x2 Thread Ring Gauge Go Right-Hand ISO Metric Fine Thread DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise Go‑checking to DIN 13 and the durability of hardened gauge steel for reliable thread inspection; order the thread ring gauge directly via Metav Werkzeuge or consult our specialists if additional technical advice is required. Thread ring gauge M33 x 2 mm (Go) — Go gauge for metric ISO fine thread, DIN 13, 6g — Metav IndustryLine A thread ring gauge M33 x 2 mm (Go) for production and quality control of right‑hand metric ISO fine threads on shop‑floor components Go gauge for M33 x 2 metric ISO fine thread Manufactured to DIN 13, tolerance class 6g Hardened gauge steel for long service life Right‑hand thread, ready for inspection Faster, compliant Go inspection for production lines A dedicated Go ring gauge accelerates pass/fail decisions during incoming inspection and in‑process checks. By confirming that internal threads meet the acceptance limit, the gauge reduces measurement time compared with full dimensional checks and supports a steady production flow. Constructed for compatibility with metric ISO fine thread standards, this Go gauge simplifies conformity checks and helps maintain throughput without compromising traceability. Robust materials that reduce replacement intervals Made from hardened gauge steel, the ring resists wear from repeated fitting and removal, extending service life under frequent use. The hardened finish preserves thread geometry, which keeps inspection results consistent and reduces the need for frequent replacement. This durability translates into fewer interruptions on the shop floor and lower total cost of ownership for quality‑assurance tooling. Norm conformity and clear acceptance criteria Built to DIN 13 with tolerance class 6g, the gauge embodies recognised acceptance limits for metric fine pitches, ensuring interoperability with standard parts and drawing specifications. Using a standardised Go gauge removes ambiguity in pass/fail assessment and supports documented quality processes, which is particularly important where certificate‑based traceability or batch documentation is required. Practical handling and application benefits The ring’s geometry and right‑hand thread design allow quick engagement with threaded components for repeatable checks. The compact form factor and balanced mass aid stable handling during rapid inspection cycles, while the straightforward Go/No‑Go principle helps less specialised staff perform effective checks after brief instruction. Routine visual inspection and adherence to simple care procedures keep the gauge in serviceable condition for many inspection cycles. For reliable, standard‑compliant Go testing choose the Thread ring gauge M33 x 2 mm (Go) from Metav IndustryLine — order via Metav Werkzeuge in Emmerich or contact our consultants by phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice Technical data Article number / SKU: M315.133.7 GTIN: 4054469124643 Thread size: M33 x 2 Facts Weight: 0.54 kg Tariff code: 90173000 eClass: 21170214 Special features Go gauge for M33 x 2 metric ISO fine thread Tolerance class 6g (DIN 13) Hardened gauge steel Right‑hand thread FAQ What does the "Go" designation check on this ring gauge? The Go ring gauge verifies that an internal thread meets the maximum material limits defined for the size; the Thread ring gauge M33 x 2 mm (Go) confirms acceptability for right‑hand metric ISO fine threads without measuring individual dimensions. Is the gauge suitable for production use and frequent checking? Yes, the hardened construction and DIN 13 tolerance class make the gauge appropriate for routine shop‑floor inspection and repeated fitting during production control. Which standard and tolerance class apply to this gauge? This ring gauge is manufactured to DIN 13 and complies with tolerance class 6g, ensuring standardised acceptance criteria for metric ISO fine threads. How should the gauge be cared for to maintain accuracy? Keep the ring clean and free of chips or lubrication residues; perform regular visual checks and store it protected from shocks and corrosion to preserve the hardened thread profile. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33x3 Thread Go Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of precise DIN‑class conformity combined with hardened gauge‑steel construction for dependable, repeatable thread inspection in production. Order the Thread gauge ring M33 x 3 mm (go) directly via Metav Werkzeuge or consult Metav's advisors for specification support. Thread gauge ring M33 x 3 mm (go) — DIN 13, hardened gauge steel | Metav IndustryLine The Thread gauge ring M33 x 3 mm (go) is a go‑type ring gauge for checking M33×3 metric ISO fine threads in production and quality control environments. DIN 13 tolerance class 6g Hardened gauge steel construction For M33 x 3 metric ISO fine threads Right‑hand 'go' acceptance gauge Conformity that reduces inspection uncertainty This ring gauge is specified to DIN 13 and tolerance class 6g, providing a clear, standardised basis for go/no‑go assessments on metric ISO fine threads. By using a dedicated acceptance ring, traceable verification of internal thread quality becomes repeatable and fast, reducing subjective judgement in the inspection loop. The standard reference reduces rejection variance and supports consistent production decisions. Robust construction for everyday workshop use Manufactured from hardened gauge steel, the gauge combines wear resistance with dimensional stability. The solid construction and compact mass (0.61 kg) make the component easy to handle while maintaining sufficient rigidity during check cycles. This durability translates into fewer replacements and steady measurement characteristics over many cycles, supporting uninterrupted quality control on the shop floor. Fast acceptance checks to keep throughput high Designed as a go ring, the device enables immediate acceptance checks: a pass indicates the threaded component meets the specified internal profile for assembly. The right‑hand orientation matches common thread directions and allows rapid inline checks without additional fixturing. Integrating such gauges into production control points accelerates throughput and reduces downstream assembly faults. Clear identification and practical data for procurement Items are delivered clearly marked with the article identifier and include key specification data to simplify inventory and compliance processes. The compact format supports easy storage on tool trolleys and in inspection kits, allowing quality engineers to standardise checks across multiple machines and shifts. The robust specification supports long service life and predictable inspection outcomes. Contact Metav Werkzeuge for direct supply of the Thread gauge ring M33 x 3 mm (go) from Emmerich and for expert advice on integrating gauges into production inspection workflows Technical Data Article number: M315.133.8 GTIN: 4054469124650 Weight: 0.61 kg Facts Thread: M33 x 3 Standard: DIN 13, 6g Direction: Right‑hand Tariff number: 90173000 Special features Material: hardened gauge steel Type: go ring gauge Application: metric ISO fine threads Category: Gauges / Inspection tools FAQ What does the designation M33 x 3 mean for this gauge? The designation indicates the thread form and pitch the gauge is made for; the ring checks internal threads sized M33 x 3 to ensure conformity with metric ISO fine thread profiles. Is this an acceptance (go/no‑go) gauge or a setting gauge? This item is supplied as a go ring for acceptance checks; a successful fit confirms the internal thread meets the specified tolerance for the go condition. Which tolerance and standard does the gauge follow? The gauge is manufactured to DIN 13 and tolerance class 6g, providing a recognised benchmark for thread quality assessment. What material is used and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to preserve measurement integrity across repeated use. Can this gauge be used for left‑hand threads? No; this ring is produced for right‑hand threads. Left‑hand versions must be specified separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33x3 Thread Limit Gauge Right-Hand Metric ISO Fine Thread, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Data conflict detected: the product record lists both "ausschuss" (scrap) and "gut" (good) as true — please verify the product condition before a product description is created. This discrepancy in the product record indicates conflicting information regarding its status, which could lead to errors in documentation or processing. Ensuring clarity on whether the product is classified as scrap or good is essential to avoid potential misunderstandings or mismanagement. Please review the relevant details thoroughly and confirm the accurate condition of the product before proceeding with the creation of any associated description or record updates.
M33x3 Thread Ring Gauge Go Right-Hand Metric ISO Fine Pitch DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of DIN 13 conformity and hardened gauge steel for reliable verification of metric fine threads; the robust design supports reproducible inspection routines and reduces rework. Order the thread ring directly via Metav Werkzeuge or consult our technical advisors for specification matching. Thread Ring Gauge M33 x 3 mm (DIN 13, 6g) — Metav IndustryLine, hardened gauge steel The Thread Ring Gauge M33 x 3 mm is a hardened ring gauge designed for verification of metric ISO fine threads (right-hand), well suited to production inspection and quality-control environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M33 × 3 mm metric ISO fine thread, right-hand Reliable checks for fine-thread production The ring gauge provides a straightforward, repeatable means of verifying internal threads where accuracy and throughput matter. Manufactured from hardened gauge steel, the tool resists wear under repeated use and maintains its profile for consistent assessment over time. Conformity with DIN 13 and tolerance class 6g gives a clear, industry-standard acceptance criterion, simplifying go/no-go decisions on the shop floor and reducing the need for lengthy secondary inspection. Robust construction that supports regular inspection cycles A compact, solid design translates into repeatability and robustness during frequent handling. The hardened material minimises profile degradation, thereby extending service life and lowering lifecycle costs related to replacement and recalibration. The gauge’s mass and form factor allow fast manual checks at the assembly bench or inspection station, improving operational efficiency without compromising the comparability of results between operators. Easy integration into quality workflows Intended for verification of metric ISO fine threads, the ring gauge suits batch inspection and incoming goods control where consistent thread quality is required. Use of a dedicated ring gauge streamlines inspection sequences and provides immediate, objective results for M33 × 3 threads, helping to detect deviations early and avoid unnecessary rework. If traceable calibration is required, a calibration certificate can be issued on request to document conformity with internal quality systems. For reliable and consistent thread inspection, request the Metav IndustryLine thread ring via Metav Werkzeuge — our Emmerich team can advise on delivery options and specifications to suit production needs. Technical Data Article number: M315.233.8 GTIN: 4054469126319 Weight: 0.49 kg Material: hardened gauge steel Thread size: M33 x 3 Standard: DIN 13, 6g Manufacturer: Metav IndustryLine Tariff code: 90173000 Facts Mass: M33 x 3 Weight in kg: 0.49 Tolerance class: 6g Standard: DIN 13 Special features Right-hand metric ISO fine thread verification Hardened gauge steel for wear resistance Suitable for production inspection and quality control Category: gauges FAQ What thread sizes does this ring gauge check? The ring gauge is specified for an internal thread of M33 x 3 mm and is intended for metric ISO fine threads in that nominal size. Is the gauge compliant with recognised standards? Yes, the product meets DIN 13 with tolerance class 6g, ensuring standardised acceptance criteria for thread inspection. What material is the gauge made from and why does that matter? Manufactured from hardened gauge steel, the gauge resists wear during repeated use and preserves the thread profile needed for reproducible inspections. Can this ring gauge be used in a production environment? The gauge is designed for shop-floor and inspection-station use, enabling quick verification of M33 × 3 threads and supporting efficient quality control. How is the product identified for ordering? Order using article number M315.233.8 and refer to the Metav IndustryLine thread ring gauge for M33 x 3 mm when specifying requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33x3.5 Limit Plug Gauge For Metric ISO Thread Right-Hand Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of a robust combination of hardened gauge steel and strict DIN 13, 6H conformity for dependable pass/fail checks of metric threads. Order this limit gauge through Metav Werkzeuge or contact our consultants for application advice and procurement support. Limit thread plug gauge M33 x 3.5 mm – right-hand, DIN 13 6H (Metav IndustryLine) The Limit thread plug gauge M33 x 3.5 mm is a right-hand metric ISO thread gauge designed for fast Go/No‑Go verification in production and quality control environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Limit plug gauge for Go/No‑Go checking For M33 x 3.5 mm metric ISO threads Faster, unambiguous pass/fail inspection for threaded parts A dedicated limit thread plug gauge offers a direct, shop-floor friendly method for assessing internal threads without complex measurement setups. Thanks to DIN 13 compliance and the 6H tolerance class, inspectors obtain immediate, standardised results that align with industry expectations. The compact gauge principle removes interpretation errors common to visual checks and supports rapid decisions that keep production lines moving with minimal interruption. Robust construction that resists wear and preserves accuracy Made from hardened gauge steel, this plug gauge withstands repetitive use and retains geometric integrity under workshop conditions. The material choice contributes to stable contact geometry and reduces the frequency of replacement, translating into lower life-cycle costs and predictable performance. As a consequence, traceable inspections become simpler to operate and audit, improving overall quality assurance without adding measurement complexity. Practical design for production and incoming inspection Engineered as a right-hand thread limit plug for the M33 x 3.5 mm metric size, the tool is immediately applicable for incoming part checks and in-process controls. Its straightforward Go/No‑Go function removes the need for auxiliary gauges or elaborate fixturing, helping to shorten throughput times. The gauge’s balanced mass supports secure handling and repeatable engagement with the test thread, making it a pragmatic choice for busy inspection benches. Contact Metav Werkzeuge for a tailored quotation or technical clarification and secure this Metav IndustryLine limit thread plug gauge for reliable, repeatable thread verification at your facility; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.033 GTIN: 4054469122946 Tariff number: 90173000 Condition: Good Core specifications Nominal diameter: 33 mm Pitch: 3.5 mm Weight: 0.77 kg Tolerance class: 6H Features Material: hardened gauge steel Right-hand thread Limit plug gauge (Go/No‑Go) Standard: DIN 13 FAQ What does a limit thread plug gauge check? A limit thread plug gauge performs a quick pass/fail inspection of internal threads; the Limit thread plug gauge M33 x 3.5 mm verifies whether a threaded bore meets the dimensional limits specified by the DIN 13 standard. Is this gauge suitable for production use on the shop floor? Yes; the hardened construction and simple Go/No‑Go function make the plug gauge well suited for routine production and incoming inspection tasks. Which tolerance and standard does the gauge comply with? The gauge is manufactured to DIN 13 and the 6H tolerance class, ensuring compatibility with standard metric ISO threads. How does the material affect longevity? Constructed from hardened gauge steel, the tool offers improved wear resistance and consistent contact geometry, which prolongs service life under frequent use. Can this gauge be used on left-hand threads? No; this particular plug gauge is specified as a right-hand thread tool and should be matched to the corresponding thread direction. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33x3.5 Thread Ring Gauge Right-Hand ISO Metric, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise M33 x 3.5 mm verification to ensure parts meet ISO metric thread tolerances and benefit from a hardened gauge steel construction for long service life; order directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge M33 x 3.5 mm — Ring gauge, DIN 13, 6g (Metav IndustryLine) A thread ring gauge M33 x 3.5 mm designed for right‑hand metric ISO threads, providing a robust inspection tool for production and quality control M33 x 3.5 mm metric thread DIN 13 tolerance class 6g Hardened gauge steel construction Right‑hand thread inspection Ensure conformity to ISO metric thread standards The M33 x 3.5 mm ring gauge is produced to the DIN 13 specification with tolerance class 6g, enabling clear verification of external metric screw threads in serial production. As a purpose‑made ring gauge for right‑hand threads, it supports fast, repeatable acceptance or sorting decisions on the shop floor. Using a dedicated gauge reduces uncertainty in assembly processes and helps keep rework and rejects to a minimum by confirming that external threads are within the allowed tolerance band. Durable materials for repeatable measurements Manufactured from hardened gauge steel, the ring gauge resists wear and maintains its reference geometry over many cycles. The heat‑treated surface provides dimensional stability and improved resistance to abrasion in everyday workshop conditions. This durability translates into fewer replacements and consistent checks over time, which supports reliable control charts and process capability assessments in mid‑to‑high volume environments. Easy integration into quality workflows The ring gauge is intended for direct use in inspection stations and assembly lines where rapid go/no‑go decisions are required. With a clear specification (metric M33 x 3.5 mm, 6g, right‑hand) it simplifies documentation and traceability in quality records. The compact form factor fits standard gauge racks and fixtures and is marked for identification, aiding quick sorting and preventing mix‑ups between similar sizes. Where formal traceability is required, the product’s GTIN and SKU facilitate inventory control and audit trails. Contact Metav Werkzeuge today for tailored advice on implementing this Metav IndustryLine thread ring gauge into the production process or to place an order — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M315.233 GTIN: 4054469126272 Mass/thread: M33 x 3.5 Material: hardened gauge steel Norm: DIN 13, 6g Manufacturer: Metav IndustryLine Facts Thread size: M33 x 3.5 Tolerance class: 6g (DIN 13) Tariff number: 90173000 ECLASS: 21170214 Special features Right‑hand metric ISO thread Intended as a reject/no‑go ring gauge For external thread inspection Hardened, wear‑resistant construction Category: Gauges / Ring gauges FAQ What is the intended use of this ring gauge? The ring gauge M33 x 3.5 mm (Metav IndustryLine, SKU M315.233) is intended for inspection of external metric threads and for rapid go/no‑go decisions in production and quality control. Does the gauge conform to recognised standards? Yes, this Metav IndustryLine ring gauge is manufactured to DIN 13 and specified to tolerance class 6g for metric ISO threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which provides wear resistance and dimensional stability so the inspection reference remains reliable over extended use. Can this gauge be used on left‑hand threads? No, this specific ring gauge is for right‑hand metric threads; left‑hand thread gauges must be ordered separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33×1 Thread Ring Gauge Go Right-Hand ISO Metric Fine Pitch DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
The hardened ring serves as a dedicated No‑go control for M33 x 1 metric ISO fine threads, combining DIN 13 tolerance class and robust gauge‑steel construction to protect assembly quality and reduce the risk of false acceptance. Order the gauge via Metav Werkzeuge or consult the Metav team for application advice and availability. Thread ring gauge M33 x 1 mm — No‑go, DIN 13, 6g (Metav IndustryLine) The Thread ring gauge M33 x 1 mm is a hardened inspection ring intended for verification of right‑hand metric ISO fine threads to DIN 13, tolerance class 6g, providing a clear reject criterion on the shop floor. Thread ring gauge M33 x 1 mm DIN 13 tolerance 6g Hardened gauge steel construction For right‑hand metric ISO fine threads Reliable thread rejection for consistent production quality The No‑go ring offers a fast, deterministic control step that prevents undersized or improperly formed threads from progressing through production. Manufactured in hardened gauge steel, the ring maintains form stability during repeated handling and resists wear that could otherwise mask out‑of‑tolerance conditions. In practice, this means fewer downstream failures and less rework, because parts that accept the No‑go are flagged immediately for correction. The clear binary result from a Go/No‑Go regime supports statistical quality control and simplifies decision making on the shop floor. What the specification implies for inspection practice The combination M33 x 1 mm, DIN 13 and tolerance 6g identifies a metric ISO fine thread with a defined pitch and industrial tolerance band; the 6g designation prescribes the maximum material condition for acceptance. Using a dedicated No‑go ring ensures the threaded component does not exceed permitted major‑diameter or form deviations. Inspectors benefit from the instant nature of ring checks: no measurement conversion is needed and throughput is maximised while traceability of rejects is maintained. Where documented process control is required, the ring integrates smoothly into existing inspection routines. Durable construction and handling advantages Made from gauge steel, hardened, the ring combines wear resistance with dimensional stability, which preserves the inspection limit over many cycles. At approximately 0.49 kg, the component is heavy enough to feel robust yet light enough for efficient use in repetitive checks. The right‑hand thread orientation matches standard production parts, and the ring’s geometry is optimised to minimise risk of damage during engagement. Proper handling and storage will further extend service life and keep the rejection threshold consistent across shifts. Practical fit into quality workflows and supplier assurance As part of a coherent inspection toolbox, the No‑go ring is especially suited to final inline checks, incoming goods inspection or last‑step verification before assembly. Its compliance with DIN 13 supports audit evidence and simplifies supplier declarations. Sourced under the Metav IndustryLine umbrella, the gauge benefits from Metav’s European logistics and quality filtering, which aims to make precision verification accessible and reliable for industrial users. Contact Metav Werkzeuge for application support and stock details on the Metav IndustryLine M33 No‑go thread ring gauge (SKU M315.233.4) and to ensure the correct gauge is selected for specific production needs Technical data Article number: M315.233.4 GTIN: 4054469126289 Label: Thread ring gauge M33 x 1 mm No‑go Material: Gauge steel, hardened Norm: DIN 13, 6g Core figures Thread size: M33 x 1 mm Tolerance class: 6g Weight: 0.49 kg Tariff number: 90173000 Special features Right‑hand metric ISO fine thread No‑go (reject) ring gauge Hardened gauge steel construction Intended for inspection of metric ISO fine threads Category: Gauges / Lehren FAQ What is the primary function of this ring gauge? The ring serves as a dedicated No‑go control for threads; the Thread ring gauge M33 x 1 mm (Metav IndustryLine, SKU M315.233.4) identifies threads that exceed the permitted size or form defined by DIN 13 and tolerance 6g. How should the No‑go ring be used in production checks? The ring is engaged with the threaded part: if the No‑go enters, the component is out of tolerance and must be rejected or reworked; if it does not enter, the part passes this rejection criterion. This provides a rapid binary check without measurement read‑outs. Which thread form and orientation does the gauge match? The gauge is specified for right‑hand metric ISO fine threads at M33 x 1 mm and is manufactured to work with the tolerancing and thread profile requirements of DIN 13. Is the ring suitable for repeated shop‑floor use? Yes, the component is made of hardened gauge steel to resist wear and maintain dimensional integrity under routine inspection cycles, supporting reliable rejection limits over time. Does the product carry an industry standard reference? The ring is produced to conform with DIN 13 and the tolerance class 6g, which assists integration into documented quality processes and audit trails. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33×1.5 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand, DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Reliable verification to DIN 13 (6g) with hardened gauge steel and a GO tolerance lets production staff perform fast, reproducible thread checks; order the thread ring gauge M33 x 1.5 mm (GO, right‑hand) directly from Metav Werkzeuge or ask their specialists for application advice. Thread ring gauge M33 x 1.5 mm — GO, right‑hand, DIN 13 (6g) A precision thread ring gauge M33 x 1.5 mm designed for rapid go/no‑go inspection of metric ISO fine threads in workshop and production environments. GO ring gauge for M33 x 1.5 threads Hardened gauge steel construction Conforms to DIN 13, 6g tolerance Fast, standards‑compliant pass/fail inspection The thread ring gauge provides an immediate, binary check for M33 x 1.5 mm metric ISO fine threads in accordance with DIN 13 and the 6g tolerance class. As a GO (gut) ring, it confirms that an internal thread falls within the permitted limits without the need for complex measuring equipment. That direct approach shortens inspection time, reduces measurement interpretation and keeps throughput high in repetitive production or incoming‑goods screening. The straightforward pass/fail logic is particularly useful where speed and traceable conformity are priorities. Robust construction for repeatable performance Manufactured from hardened gauge steel, the gauge resists wear from frequent engagement and maintains its reference profile over extended service life. The right‑hand design matches standard thread direction for metric components and is balanced for consistent seating during checks. Built for routine use on the shop floor, the inspection ring combines mechanical durability with a compact form that is easy to handle, enabling technicians and quality engineers to perform multiple checks with minimal fatigue while preserving accuracy. Integration into inspection workflows for greater efficiency This inspection ring is intended for quality control, assembly verification and batch sampling where rapid decision‑making reduces downtime. By replacing subjective gauging methods with a certified GO check, the gauge supports reproducible results across shifts and operators and helps to prevent non‑conforming parts from progressing through production. For application-specific advice or guidance on fitting the gauge into a calibrated inspection routine, Metav Werkzeuge’s technical team can offer specification support and supply chain information. For supply, availability and tailored application advice on the Metav IndustryLine thread ring gauge, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to reserve stock or request further specification support Technical data Article number: M315.133.6 GTIN: 4054469124636 Tariff number: 90173000 Measurements Thread size: M33 x 1.5 mm Weight: 0.43 kg Tolerance class: 6g Materials & features Material: gauge steel, hardened Type: GO (pass) ring gauge Hand: right‑hand Standard: DIN 13 Category: thread gauges / inspection rings FAQ What thread form and size does the gauge check? The ring checks metric ISO fine threads with a nominal size of M33 x 1.5 mm; it is fashioned as a GO gauge for right‑hand threads and references DIN 13, tolerance 6g. Is the gauge suitable for frequent shop‑floor use? Yes. The inspection ring is made from hardened gauge steel to withstand repeated engagement while maintaining the critical profile for reliable go/no‑go checking. How does the GO designation affect inspection procedure? A GO ring confirms that the internal thread meets the permitted dimensions for the specified tolerance class; a part that accepts the GO ring is considered within tolerance for the checked limits, making the check rapid and unambiguous. What are the identifiers for ordering or traceability? Article number M315.133.6 and GTIN 4054469124636 identify this Metav IndustryLine thread ring gauge for procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33×1.5mm Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of robust conformity and effortless handling for repeatable thread inspections: the hardened gauge steel construction and DIN 13 / 6H tolerance ensure reliable acceptance testing for ISO metric fine threads. Order the gauge directly via Metav Werkzeuge or contact the consultants for application advice. Limit thread plug M33 × 1.5 — ISO metric fine thread, right‑hand (Metav IndustryLine) The Limit thread plug M33 × 1.5 is a right‑hand limit gauge designed to verify ISO metric fine threads in production and incoming inspection, suited to workshop and shop‑floor use Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Right‑hand M33 × 1.5 ISO fine thread Stable 0.4 kg mass for handling Accuracy and conformity that reduce rework The limit plug is manufactured to DIN 13 with a 6H tolerance, providing a clear, verifiable basis for thread acceptance decisions. Using a dedicated limit thread gauge simplifies go/no‑go checks and makes conformity assessments reproducible across shifts. The specified metric size M33 × 1.5 targets fine‑threaded components common in mechanical assemblies; by confirming thread form and pitch against the standard, the gauge helps to reduce downstream rework and assembly failures while supporting consistent quality control. Robust construction for repeatable measurements Made from gauge steel, hardened, the gauge delivers mechanical stability and wear resistance that preserve dimensional integrity over many inspection cycles. The unit’s 0.4 kg mass gives a reassuring feel and steady handling during manual checks, reducing wobble when engaged with the workpiece. As a right‑hand thread limit plug, it matches typical production orientations and improves operator efficiency by minimising handling uncertainty during routine checks. Workflow integration and traceability for inspection regimes The device is supplied as part of the gauges category and can be tracked using its SKU M315.033.6 and GTIN 4054469122960 for inventory control and documentation. The clear designation as a limit thread plug for metric ISO fine threads supports straightforward inclusion in inspection plans and quality documentation. Durable materials and standard conformity make this gauge a pragmatic choice for repeat inspections in workshops, maintenance bays, and small series production where stable, verifiable checks are required. Contact Metav Werkzeuge in Emmerich for tailored advice and to arrange supply of the Metav IndustryLine limit thread plug M33 × 1.5 — phone +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M315.033.6 GTIN: 4054469122960 Weight: 0.4 kg Material: Gauge steel, hardened Thread: M33 × 1.5 Direction: Right‑hand Standard: DIN 13, 6H Facts Tariff number: 90173000 eClass: 21170235 Special features Limit thread plug for ISO metric fine thread Category: Gauges / Thread plugs Robust construction for shop‑floor use FAQ What is the intended use of this limit thread plug? The limit thread plug is intended for rapid go/no‑go verification of ISO metric fine threads (M33 × 1.5) during production and incoming inspection; it provides a clear acceptance criterion for threaded parts. Which standard does the gauge comply with? The gauge is manufactured to DIN 13 with a 6H tolerance, ensuring compatibility with standard ISO metric fine‑thread specifications. What material is the gauge made from and how does that benefit inspection? Constructed from hardened gauge steel, the plug offers durability and stable dimensions over repeated use, which supports reproducible inspection results and longer service life. How can the gauge be identified in stock and documentation? The item is listed under SKU M315.033.6 and GTIN 4054469122960, enabling traceability in inventory systems and quality records. Is this gauge suitable for shop‑floor use? Yes — the combination of a hardened construction and a solid 0.4 kg mass makes it suitable for routine checks on the shop floor where handling stability matters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33×1mm Go/No-Go Thread Plug Gauge Metric ISO Fine Right Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a hardened gauge-steel construction combined with DIN 13, 6H conformity for consistent go/no‑go verification and reliable shop-floor throughput; order directly via Metav Werkzeuge or consult our specialists for technical matching and supply. Limit thread plug gauge M33 x 1 mm for metric ISO fine thread, right-hand — hardened gauge steel, DIN 13, 6H A limit thread plug gauge M33 x 1 mm for fast go/no‑go checking of right‑hand ISO metric fine threads in production and quality control environments Hardened gauge steel construction Conforms to DIN 13, 6H Right‑hand ISO metric fine thread M33×1 Go/no‑go limit checking for quick inspection Immediate acceptance testing for production lines The go/no‑go concept implemented in this limit gauge enables rapid verification of internal threads without complex measuring routines. Designed for straightforward pass/fail control, the gauge removes ambiguity from repetitive inspection tasks and speeds up process throughput. Made from hardened gauge steel, the tool resists wear under frequent engagement cycles, preserving the reference geometry essential for repeatable results. For machining centres and assembly stations where cycle time and reliability matter most, this gauge offers a compact method to confirm conformity to thread standards. Consistent compliance with international thread standards Thread geometry adherence is assured by the DIN 13, 6H designation, which defines the tolerance position and pitch realisation for ISO metric threads. The M33 × 1 mm specification and the right‑hand orientation match common fine‑thread applications in precision assemblies, fastenings and instrumentation housings. Using a dedicated limit plug reduces interpretation error compared with ad hoc inspection and supplies a clear quality decision at the point of manufacture. Where traceability is required, complementing inspection routines with record keeping ensures compliance across batches. Robust build for recurring workshop use The gauge’s construction in hardened gauge steel delivers durability in day‑to‑day shop conditions while maintaining the necessary reference surfaces for long service life. At approximately 0.7 kg, the tool is substantial enough to remain stable during handling and inspection yet compact for bench storage. The practical design supports frequent insertion and withdrawal without compromising the defined tolerances, making it suitable for use at incoming inspection points, assembly lines or maintenance benches where quick verification prevents downstream rework. Practical integration into quality workflows As a dedicated limit gauge, this instrument integrates easily into inspection routines and work instructions: mark inspection stations for rapid go/no‑go checks, include the gauge in control plans for threaded features, and schedule regular wear checks to guarantee ongoing conformity. The clear outcome delivered by the gauge reduces dependence on time‑consuming dimensional measurement for every item and allows calibrated instruments to be reserved for sporadic verification or troubleshooting. This approach balances efficiency with the technical rigour expected in industrial quality management. Contact Metav Werkzeuge for procurement advice or to match this Metav IndustryLine gauge to specific thread inspections; technical consultants are available to assist with suitability and delivery from Emmerich. Technical data Article number: M315.033.4 GTIN: 4054469122953 Weight: 0.7 kg Facts Thread designation: M33 × 1 mm Pitch: 1 mm Orientation: right‑hand Special features Material: hardened gauge steel Standard: DIN 13, 6H Function: limit plug gauge (go/no‑go) Category: gauges / inspection FAQ What is the intended use of this limit thread plug gauge? This limit thread plug gauge M33 x 1 mm is intended for go/no‑go verification of internal ISO metric fine threads in production, assembly and quality‑control environments. Does the gauge conform to an identifiable thread standard? Yes, the gauge is manufactured to comply with DIN 13, 6H, ensuring the tolerance position and form are suitable for standard ISO metric fine threads. What material is the gauge made from and how does that affect durability? The gauge is made from hardened gauge steel; this material choice improves resistance to wear and preserves the gauge geometry during repetitive inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33×2 Thread Go Ring Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
Ensure consistent thread inspection with the combination of hardened gauge steel construction and DIN 13, 6g conformity for reproducible quality control; the ring gauge’s no‑go function helps prevent oversize threads entering assembly. Order the gauge directly via Metav Werkzeuge or consult the Metav advisors for application guidance. Thread ring gauge M33 x 2 mm — No‑Go ring for metric ISO fine threads — Metav IndustryLine A thread ring gauge M33 x 2 mm for rapid go/no‑go verification of external metric ISO fine threads in production and quality inspection. Thread ring gauge M33 x 2 mm No‑Go Conforms to DIN 13, tolerance 6g Hardened gauge steel for long service life Right‑hand metric ISO fine thread Fast, reliable rejection of oversize threads A dedicated no‑go ring gauge saves time at the inspection station by instantly signalling oversize external threads that must be reworked or rejected. Manufactured from hardened gauge steel, the device resists wear and maintains its gauging limit over many cycles, which reduces requalification frequency and supports stable batch acceptance decisions. The direct mechanical check avoids interpretation errors common with indirect measurement methods and fits seamlessly into line-side quality checkpoints. Clear standards compliance for traceable inspections Conformity with DIN 13 and the tolerance class 6g ensures that readings relate directly to established metric ISO thread tolerances. The tolerance designation indicates the intended limit for the external thread under inspection, so the ring gauge performs a deterministic pass/fail check rather than providing a derived value. This deterministic behaviour simplifies documentation and helps maintain reproducible production records for internal audits or customer inquiries. Robust design for shop‑floor conditions Constructed from hardened gauge steel, the ring gauge balances hardness and dimensional stability to withstand handling in a busy workshop. The compact, single‑piece design allows swift engagement with threaded parts and limits the risk of accidental damage during use. At 0.49 kg overall mass the gauge is substantial enough for steady hand use yet light enough for repetitive checks without fatigue, supporting efficient quality workflows. Practical integration into inspection routines As a right‑hand thread ring gauge for M33 x 2 mm pitch, the tool is intended for external thread verification in components ranging from fasteners to machined housings. Its no‑go function provides an immediate rejection criterion, reducing downstream failures and rework costs. For companies standardising inspection across several lines, the gauge is a straightforward element to include in inspection plans, visual control lists and first‑article inspection procedures. For robust and standard‑compliant thread control choose the Metav IndustryLine M33 x 2 mm no‑go ring gauge — contact Metav Werkzeuge in Emmerich for technical advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: M315.233.7 GTIN: 4054469126302 Weight: 0.49 kg Material: gauge steel, hardened Dimension: M33 x 2 Norm: DIN 13, 6g Thread direction: right‑hand Type: No‑Go ring gauge Numbers / Core technical data Tariff number: 90173000 Category: Lehren (gauges) SKU: M315.233.7 Special features / Versions For metric ISO fine thread applications Hardened material for extended service life Intended for external thread verification Suitable for workshop and production inspection FAQ What is the primary purpose of this ring gauge? The ring gauge is a no‑go thread ring gauge M33 x 2 mm intended to detect oversize external metric ISO fine threads and provide a definitive pass/fail result at the inspection point. Which tolerance and standard does the gauge correspond to? The tool complies with DIN 13 and is manufactured to the 6g tolerance class, matching the standard limits used for external metric threads. What material is the gauge made from and why does it matter? Made from hardened gauge steel, the gauge offers wear resistance and dimensional stability, which preserves accuracy and reduces the need for frequent replacement. Can this gauge be used for left‑hand threads or other pitches? This specific product is configured as a right‑hand M33 x 2 mm ring and is not suitable for left‑hand threads or pitches other than 2 mm; select the appropriate gauge for alternate thread forms. How is the gauge identified for inventory and traceability? Identification is provided by the article number M315.233.7 and the GTIN 4054469126302, which can be used in quality records and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M33×3.5 Three-Point Go Thread Ring Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
This hardened GO ring delivers repeatable acceptance testing for M33 x 3.5 threads thanks to DIN 13 conformity and 6g tolerance; its hardened gauge steel construction ensures long service life with minimal wear. Order directly via Metav Werkzeuge or consult our technical advisors for application support. Thread Ring Gauge M33 x 3.5 mm (GO) — hardened gauge steel, DIN 13 (Metav IndustryLine) A Thread Ring Gauge M33 x 3.5 mm (GO) for rapid verification of metric ISO coarse threads in workshop and production environments Metric ISO verification M33 x 3.5 Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g Right-hand thread GO ring Fast, reliable go/no‑go verification for production lines The GO ring gauge provides an immediate go/no‑go decision for threaded parts, reducing inspection time and streamlining quality control. Built to the DIN 13 standard with 6g tolerance, the gauge establishes whether a thread meets the nominal profile for metric ISO coarse threads. Its compact form and positive feel in use make it suitable for production benches and incoming inspection, enabling consistent statistical sampling and reducing the need for extended measurement procedures. The result is a measurable increase in throughput while maintaining traceable acceptance criteria. Durable construction that lowers lifetime costs Manufactured from gauge steel, hardened, the ring is dimensionally stable and resistant to wear, maintaining the functional boundary between acceptable and non‑acceptable threads over many cycles. The hardening treatment ensures the contact surfaces preserve profile fidelity, which in turn extends the interval between recalibration and replacement. This longevity translates into lower total cost of ownership and fewer process interruptions for maintenance or tool change‑over in a production setting. Standards compliance and clear inspection criteria Designed for metric ISO regular threads and specified as a GO (acceptance) ring, the product aligns inspection practice with recognised standards, simplifying documentation and audit trails. The tolerance class 6g provides a well‑balanced acceptance band for general engineering applications, while the right‑hand orientation matches standard thread direction. Traceable identification such as article and GTIN numbers supports inventory control and quality records, facilitating integration into ISO‑based quality systems and production workflows. For reliable thread verification and tailored advice, contact Metav Werkzeuge for ordering and technical consultation: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.133 GTIN: 4054469124612 Net weight: 0.69 kg Tariff number: 90173000 eCl@ss: 21170214 Facts Thread size: M33 x 3.5 mm Tolerance class: 6g Standard: DIN 13 Orientation: right-hand Mass (nominal): 0.69 kg Special features Material: gauge steel, hardened Type: GO (acceptance) thread ring gauge Application: verification of metric ISO coarse threads Category: gauges / ring gauges FAQ What is the purpose of this GO ring gauge? This Thread Ring Gauge M33 x 3.5 mm (GO) is used for rapid acceptance testing of metric ISO coarse threads to confirm compliance with DIN 13 and tolerance class 6g. Is the gauge suitable for production use or only for laboratory checks? The GO ring gauge is designed for production and workshop verification; its hardened gauge steel construction supports frequent use on the shop floor. Which thread sizes and standards does this gauge cover? The gauge is specified for M33 x 3.5 mm threads and conforms to DIN 13 with tolerance class 6g for metric ISO regular threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34 x 3 mm Thread Ring Gauge ISO Fine Thread Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Taking advantage of hardened gauge steel, strict DIN 13 / 6g tolerances and compact handling, this gauge provides reliable, repeatable verification of metric fine threads; order directly via Metav Werkzeuge or consult our specialists for integration into incoming inspection routines Thread ring gauge M34 x 3 mm — DIN 13, 6g (right-hand) A thread ring gauge M34 x 3 mm designed for fast, repeatable verification of right-hand metric ISO fine threads in production and inspection environments Hardened gauge steel construction Conforms to DIN 13 tolerance 6g For M34 x 3 mm metric fine threads Compact, workshop-ready weight 0.5 kg Reliable conformity where it matters The ring is manufactured from hardened gauge steel, providing a wear-resistant contact surface that preserves dimensional integrity over repeated use. Conformance to DIN 13 with tolerance 6g means the gauge is suitable for standard ISO metric fine-thread checks, enabling process control with an objective pass/fail criterion. For shops that require consistent inspection results, the combination of material hardness and standard-compliant tolerancing reduces uncertainty and extends service intervals. Practical benefits for inspection and assembly Designed for direct use at the bench or on the shop floor, the gauge’s nominal size M34 x 3 mm and modest mass (0.5 kg) make handling straightforward while keeping the focus on throughput. The simple verification function improves efficiency in incoming goods inspections and final checks: parts are accepted or rejected immediately, shortening feedback loops and preventing non-conforming components from entering assembly. The robust construction also lowers lifetime cost by resisting deformation under normal use. Clear specification and traceable use in quality systems This inspection tool is intended as a calibrated dimensional reference that fits into documented quality routines. The standard designation DIN 13, 6g provides compatibility with written procedures and enables traceable sampling plans. Where records are required, the ring’s unambiguous size and norm reference support audit trails and process documentation. For customers seeking to align measurement practice with industry standards, this ring gauge forms a compact, certifiable element of a quality toolkit. For reliable thread verification with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for procurement advice or to discuss inventory and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.234.8 GTIN: 4054469126357 Tariff number: 90173000 Facts Thread size: M34 x 3 mm Weight: 0.5 kg Norm: DIN 13, 6g Special features Material: hardened gauge steel Intended for metric ISO fine threads Right-hand thread verification Category: Gauges / Measuring pins FAQ What thread form and tolerance does this gauge check? The thread ring gauge checks metric ISO fine threads at M34 x 3 mm and is specified to DIN 13 with a 6g tolerance, suitable for standard inspection routines. Is the gauge suitable for production use on the shop floor? Yes, the hardened gauge steel construction and compact mass (0.5 kg) make it robust and convenient for repeat use in production and inspection environments. Can this ring be used for right-hand threads only? This ring is manufactured for right-hand metric ISO fine threads and is intended for verification of that hand and form. How does the gauge support quality documentation? The explicit size and norm marking (DIN 13, 6g) enable inclusion in inspection records and sampling plans, providing traceability for audits and quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34x1 Limit Thread Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of fast, standard‑compliant thread verification with a hardened gauge steel construction and a precise M34 x 1 mm metric fine thread in right‑hand form. Order directly via Metav Werkzeuge or consult the technical team for application advice and procurement. Limit thread plug gauge M34 x 1 mm (right‑hand) — DIN 13, tolerance 6H | Metav IndustryLine The Limit thread plug gauge M34 x 1 mm is a right‑hand metric ISO fine‑thread limit gauge designed for rapid go/no‑go checks in production and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Right‑hand metric fine thread M34 x 1 Balanced 0.53 kg for easy handling Fast, standards-based verification to keep processes flowing A limit plug gauge provides an immediate answer on compliance: go/no‑go. Manufactured for the workshop and production floor, this plug gauge supports DIN 13 thread standards with the 6H tolerance class, making it suitable for routine inspections of metric fine threads. The M34 x 1 mm size and right‑hand form permit direct checks of nominal diameter and pitch conformity without elaborate measurement setups, enabling quick decisions that reduce bottlenecks on assembly lines and in quality control. Repeatable results through robust materials and ergonomic handling The gauge is made from hardened gauge steel, which ensures long‑term dimensional stability and wear resistance even under repeated use. At 0.53 kg, the tool is sufficiently substantial to feel stable in the hand while remaining easy to manoeuvre during batch testing. These material and design choices support repeatability in inspection tasks: a durable finish and precise machining minimise wear‑induced drift, so the same gauge can be relied upon for consistent go/no‑go checks over many cycles. Practical integration into inspection routines and traceability This limit plug gauge is built for immediate integration into standard operating procedures: quick pass/fail checks, visual logging of results and simple storage once inspection is complete. Traceability is supported by the catalogue identifiers SKU M315.034.4 and GTIN 4054469122991, which simplify inventory management and documentation. For production environments that prioritise throughput and proven conformity, the combination of a standardised thread form, hardened material and compact handling reduces inspection time and supports confident release decisions. Choose the Metav IndustryLine limit thread plug gauge for reliable, DIN‑compliant thread verification and contact Metav Werkzeuge in Emmerich for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.034.4 GTIN: 4054469122991 Thread size: M34 x 1 mm Material: Gauge steel, hardened Standard: DIN 13, 6H Hand: right Weight: 0.53 kg HS code: 90173000 Numbers / Core technical data Nominal diameter: 34 mm Thread pitch: 1 mm Tolerance class: 6H Weight: 0.53 kg GTIN numeric: 4054469122991 Special features / Design Limit (go/no‑go) plug gauge Right‑hand metric fine‑thread Hardened gauge steel for wear resistance Category: Thread gauges / plug gauges FAQ What thread size and pitch does this gauge check? The limit thread plug gauge checks an M34 x 1 mm metric fine thread (34 mm nominal diameter, 1 mm pitch) in a right‑hand form. Which standard and tolerance class apply to this tool? The tool is manufactured to DIN 13 and conforms to tolerance class 6H, providing standardised criteria for go/no‑go verification. Is the gauge suitable for production line checks? Yes, the M34 x 1 limit plug gauge from Metav IndustryLine is intended for rapid production and incoming inspection checks where a clear go/no‑go decision is required. How does the material affect performance? Made of hardened gauge steel, the gauge resists wear and maintains dimensional stability, which supports repeatable inspection results over time. How can the product be identified for reorders or documentation? Use SKU M315.034.4 and GTIN 4054469122991 for procurement, stock management and traceability in inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34x1 Thread Ring Gauge Go Metric ISO Fine Right Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
The combination of DIN 13 conformity, hardened gauge steel and the compact M34 x 1 mm Go form a reliable basis for reproducible thread inspection; secure traceable acceptance testing and minimise production rejects. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M34 x 1 mm (Go) – hardened gauge steel, DIN 13 The Thread ring gauge M34 x 1 mm (Go) is a hardened ring gauge designed for quick verification of metric ISO fine external threads in production and quality assurance. Hardened gauge steel, ground finish Conforms to DIN 13, tolerance class 6g Right-hand metric ISO fine thread Compact weight 0.53 kg Repeatable inspection with standardised precision A hardened ring gauge that follows DIN 13 ensures reproducible acceptance checks for external metric threads. The M34 x 1 mm Go size verifies that threaded parts conform to the intended nominal diameter and pitch; this reduces the risk of assembly failures and costly rework. Using a dedicated acceptance gauge streamlines the control step in a manufacturing line, enabling rapid pass/fail decisions without elaborate measurement setups. The combination of a ground finish and the specified 6g tolerance class supports consistent seating and minimal wear during routine checks. Durable construction that supports production flow Manufactured from hardened gauge steel, the gauge resists deformation and maintains dimensional stability under frequent use. Its compact mass of 0.53 kg allows easy handling on the shop floor and simple storage between inspection cycles. The robust material and finish reduce measurement uncertainty caused by surface damage, so fewer replacement gauges are required over time. For workshops and inspection benches where throughput and longevity matter, the durable construction translates directly into lower downtime and a steadier supply of conforming parts. Practical integration into quality workflows As an acceptance tool for metric ISO fine threads, the ring gauge fits naturally into incoming inspection, in-process checks and final quality control. The Go design confirms whether external threads fall within permissible limits; when used together with documented procedures, it supports traceability and audit readiness. The gauge’s clear specification of M34 x 1 mm and DIN 13, 6g simplifies procurement and inventory management, ensuring compatibility with common fine-thread components. For production environments seeking measurable improvements in first-pass yield, the gauge is a straightforward and effective control element. Opt for the Metav IndustryLine thread ring gauge when dependable, standards-compliant thread verification is required — contact Metav Werkzeuge for technical guidance and secure supply from Emmerich. Technical Data Article number: M315.134.4 GTIN: 4054469124667 Weight: 0.53 kg Size: M34 x 1 Material: Gauge steel, hardened Standard: DIN 13, 6g Orientation: Right-hand Facts Nominal diameter: M34 Thread pitch: 1 mm Tolerance class: 6g Weight (numeric): 0.53 Special features Go ring gauge (acceptance gauge) For metric ISO fine external threads Right-hand thread verification Ground finish for repeatability Tariff number: 90173000 Category: Gauges / Thread gauges FAQ What tolerance and standard does this gauge check to? The gauge verifies external threads to DIN 13 with tolerance class 6g, as specified for the M34 x 1 mm Go ring gauge (Metav IndustryLine, SKU M315.134.4). Is the gauge suitable for fine-pitch metric threads? Yes, the ring gauge is intended for metric ISO fine threads with 1 mm pitch and is manufactured for right-hand external thread inspection. What material is the gauge made from and why does that matter? The ring gauge is produced from hardened gauge steel, which provides dimensional stability and resistance to wear—key properties for maintaining consistent inspection results. Can this gauge be used on the shop floor for fast pass/fail checks? Yes; the Go ring gauge M34 x 1 mm is designed for rapid acceptance testing in production and quality control environments where quick, reproducible decisions are required. What identification is available for ordering or traceability? Order and trace using SKU M315.134.4 (GTIN 4054469124667); the product is listed under Metav IndustryLine for catalogue and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34x1.5 Limit Go/No-Go Thread Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take the dependable combination of hardened gauge steel and DIN 13, 6H conformity to ensure fast pass/fail decisions in production. The clear metric specification and robust construction reduce rework and support steady inspection throughput — order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit thread plug gauge M34 x 1.5 mm — right-hand, hardened gauge steel (Metav IndustryLine) A limit thread plug gauge M34 x 1.5 mm that verifies conformity of metric ISO fine threads in manufacturing and inspection environments DIN 13, 6H compliance Hardened gauge steel construction M34 x 1.5 mm metric fine thread Right-hand thread checking Fast, reliable pass/fail inspection on the shop floor A dedicated limit thread plug gauge with the clear designation M34 x 1.5 mm offers a compact and unambiguous solution for routine thread checks. Used for quick pass/fail decisions, the gauge removes subjective interpretation from thread inspection and shortens control loops. Compliance with DIN 13 and the 6H tolerance class provides a familiar reference frame for engineering and quality teams, enabling consistent acceptance criteria across batches and suppliers while reducing the risk of scrap or downstream failure. Durable construction for repeatable measurements Manufactured from gauge steel, hardened, the plug gauge is designed for long service life under repetitive use. The solid build, reflected in a mass of 0.53 kg, gives the tool good handling characteristics and stability during engagement with threaded parts. Hardening reduces wear on the critical measuring surfaces so that the pass and fail limits remain reliable over time, supporting predictable maintenance intervals and a lower total cost of ownership for the inspection setup. Practical integration into quality workflows The right-hand configuration simplifies inspection of common metric components and fits seamlessly into go/no-go routines at incoming inspection, in-process control or final release. The compact form and unambiguous thread designation make the gauge easy to store in calibration racks or tool boards and straightforward to document in quality records. With its clear specification, the gauge also assists communication with suppliers and production planners when defining thread acceptance and traceability requirements. For accurate and repeatable thread inspection of M34 x 1.5 mm assemblies, choose the Metav IndustryLine limit thread plug gauge and contact Metav Werkzeuge for ordering and application guidance. Technical Data Article number: M315.034.6 GTIN: 4054469123004 Label: Grenzgewinde-Lehrdorn M 34 x 1,5mm for metric ISO fine thread, right; 0.53 kg Facts Weight: 0.53 kg Thread size: M34 x 1.5 mm Tariff number: 90173000 Special features Material: gauge steel, hardened Norm: DIN 13, 6H Thread type: metric ISO fine thread, right-hand Categories: measuring probes; gauges FAQ What exactly does the gauge check? The limit thread plug gauge checks conformity of metric ISO fine threads to the specified limits; the M34 x 1.5 mm gauge distinguishes acceptable from non‑conforming parts. Is the gauge suitable for production use or only for laboratory checks? The Metav IndustryLine limit thread plug gauge is designed for workshop and production use where fast go/no-go decisions are required. How is repeatability ensured over time? Repeatability is supported by the hardened gauge steel construction and robust geometry, which minimise wear on the critical surfaces and preserve the defined limits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34x1.5 Thread Gauge Ring Right-Hand ISO Metric Thread, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
A hardened gauge steel construction combined with DIN 13 tolerance class 6g guarantees fast, repeatable go/fit checks on metric fine threads; the compact M34 x 1.5 size and modest mass make it suitable for production and inspection benches. Order the Go ring gauge M34 x 1.5 directly via Metav Werkzeuge or ask our consultants if needed. Go thread ring gauge M34 x 1.5 mm — DIN 13, 6g (Metav IndustryLine) The Go thread ring gauge M34 x 1.5 mm serves as a hardened, right-hand gauge for rapid verification of metric ISO fine threads in workshop and production environments. Hardened gauge steel construction Metric ISO fine thread M34 x 1.5 right-hand Manufactured to DIN 13 tolerance class 6g Lightweight 0.53 kg for easy handling Precision that protects production flow The ring is produced to DIN 13 and tolerance class 6g, providing a measurable and industry-recognised reference for thread acceptance. Manufactured from hardened gauge steel, the device resists wear and preserves the functional profile over long inspection cycles, reducing the risk of false rejects or rework. Using a dedicated go gauge simplifies conformity checks and integrates directly into incoming inspection routines or on-machine quality stops, delivering reliable pass/fail decisions for fine-pitch metric threads. Quick checks without compromising accuracy Designed for efficient use at the control station, the ring’s compact form and 0.53 kg mass enable rapid handling and minimal operator fatigue during repetitive checks. The gauge supports straightforward go/no-go methodology for right-hand metric threads, cutting decision time on production lines and in maintenance tasks. As a purpose-made thread ring, it lowers cycle times compared with inexact measuring methods and reduces the need for secondary verification when the go test is within specification. Durable design for long service life The hardened material and precise manufacturing process result in a tool that maintains geometry under normal workshop use, supporting reproducible measurements across batches. The construction suits routine checks of mating components, gauging of repair threads and first-article inspections where consistent thread form is essential. The robust build minimises maintenance requirements while ensuring compatibility with existing quality documentation and inventory systems, helping to standardise inspection across multiple workstations. For dependable thread acceptance on metric fine pitches, specify the Metav IndustryLine Go ring gauge M34 x 1.5 — contact Metav Werkzeuge in Emmerich for procurement or technical advice. Technical data Article number: M315.134.6 GTIN: 4054469124674 Manufacturer: Metav IndustryLine Facts Thread: M34 x 1.5 Mass: 0.53 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Tolerance: DIN 13, 6g Thread direction: right-hand Type: Go (acceptance) ring gauge FAQ What does the tolerance class 6g mean for inspection? The tolerance class 6g defines the permissible dimensional deviation for the mating external thread; the ring gauge manufactured to DIN 13 ensures that parts tested with this Go ring meet the specified fit and interchangeability criteria. Is this gauge suitable for right-hand threads only? Yes, the ring is produced for right-hand metric ISO fine threads and is specifically matched to the M34 x 1.5 thread form. How long can the gauge be expected to remain accurate in daily use? Constructed from hardened gauge steel, the ring is designed for extended service life under normal workshop usage, maintaining the functional profile for repeated acceptance tests. Which item number should be ordered for this gauge? Order by SKU M315.134.6 to ensure the correct Metav IndustryLine Go ring gauge is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34x2 Limit Thread Go/No-Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of hardened gauge steel, conformity with DIN 13, 6H and the precise M34×2 fine‑thread verification for reliable production control; order the gauge directly via Metav Werkzeuge or consult our specialists for integration into existing inspection routines. Limit thread plug gauge M34 × 2 mm (right-hand) — Metav IndustryLine, DIN 13 6H A limit thread plug gauge M34 × 2 mm designed for quick, reproducible verification of metric ISO fine threads in workshop and production environments, suited to go/no‑go checking of right‑hand threads. Hardened gauge steel for long service life Conforms to DIN 13, 6H Metric M34×2 fine‑thread verification Right‑hand thread go/no‑go function Consistent thread quality through standardised verification The primary benefit of this inspection tool is rapid, objective confirmation of thread conformity. Manufactured as a limit plug gauge, the instrument gives a clear go/no‑go result for metric ISO fine threads, helping to avoid ambiguous visual inspection. Conformance with DIN 13, 6H ensures the acceptance criteria are aligned with industrial standards, so thread gauges of this type serve as a reliable reference in incoming inspection and process control. The robust definition of tolerances reduces rework and prevents assembly failures by providing an immediate, pass/fail assessment. Durable construction for repeatable measurements Made from hardened gauge steel, the gauge is dimensionally stable and resistant to wear, which preserves the calibrated limits over many inspection cycles. The right‑hand M34×2 geometry is produced to high machining standards and heat treated to retain the critical thread form. A durable material and precise workmanship together reduce drift and extend the interval between maintenance or re‑verification, supporting consistent throughput on the shop floor. For operations that require frequent checks, the mechanical simplicity of a limit plug gauge minimises handling time and training effort while supplying objective inspection results. Practical use in production and quality control As a plug‑type thread gauge, the device is intended for direct insertion into internal threads to validate pitch, diameter and form under defined tolerances. The gauge’s function is particularly valuable in batch inspection, fixture qualification and first‑article checks where a fast decision reduces production stoppages. Its compact format and no‑electronics design make it suitable for harsh workshop environments: the tool is immune to battery issues and digital faults, offering immediate tactile feedback for go/no‑go determination. For traceable measurement programmes, the gauge can be recorded as a master reference within quality documentation. Contact Metav Werkzeuge today to request the Metav IndustryLine M34×2 limit thread plug gauge for improved thread inspection workflows and expert advice from our Emmerich team. Technical data Article number: M315.034.7 GTIN: 4054469123011 SKU: M315.034.7 Core specifications Thread size: M34 × 2 mm Pitch: 2 mm Weight: 0.52 kg Customs tariff number: 90173000 Materials & special features Material: hardened gauge steel Standard: DIN 13, 6H Right‑hand thread design Limit (go/no‑go) plug gauge function Category: Gauges / Plug gauges FAQ What does the DIN 13, 6H marking indicate? The DIN 13, 6H designation on the Metav IndustryLine limit thread plug gauge M34 × 2 mm specifies the standard thread form and tolerance class applied during manufacture, defining the acceptance envelope used for go/no‑go checks. Can this gauge be used for non‑metric threads? The Metav IndustryLine M34 × 2 mm is intended for metric ISO fine threads; it is not suitable for imperial or other non‑metric thread systems without the corresponding gauge geometry. How is the limit function applied in inspection? The limit thread plug gauge M34 × 2 mm provides a simple binary result: the 'go' side verifies the lower tolerance limit for insertion, while the 'no‑go' side checks the upper tolerance, giving a direct pass/fail outcome for each threaded feature. Is the material suitable for workshop environments? Constructed from hardened gauge steel, the Metav IndustryLine gauge resists wear and maintains form under normal workshop conditions, preserving measurement integrity over repeated use. What is the typical application for this gauge? This limit plug gauge is commonly used in production inspection, incoming goods control and first‑article verification where quick, reproducible thread checks are required for assembly and quality assurance. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34x2 Thread Plug Gauge Go Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Reliable pass/fail inspection is delivered by the combination of DIN 13 (6g) tolerance and hardened gauge steel, ensuring consistent acceptance testing for metric ISO fine threads; order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M34 x 2 mm (Go) — Metric ISO fine thread gauge, DIN 13 (6g), Metav IndustryLine A Thread ring gauge M34 x 2 mm (Go) for quick verification of metric ISO fine external threads, designed as a right-hand Go gauge for shop-floor inspection and quality control Hardened gauge steel for stable measurements DIN 13 tolerance 6g for metric ISO fine threads Right-hand M34 x 2 mm Go ring gauge Suitable for workshop and inspection use Fast, reliable acceptance testing on the production line A dedicated thread ring gauge brings speed and clarity to routine quality checks. The Go function confirms that external threads meet the specified envelope defined by DIN 13 and the 6g tolerance class, turning a subjective assessment into an immediate pass/fail decision. Thanks to the hardened gauge steel construction, the gauge holds its form under repeated engagement, reducing the need for frequent replacement and keeping inspection throughput steady. For production teams, that equates to fewer stoppages, less rework and a measurable increase in line efficiency. Robust construction for repeatable measurements Designed for frequent use in workshop and inspection environments, the gauge combines a compact form with structural stiffness to resist deformation. The nominal size M34 x 2 mm is machined to the specified tolerance band and finished to ensure a smooth feel during engagement; the right-hand orientation suits standard external threads. The unit’s mass of approximately 0.68 kg gives tactile assurance without being cumbersome, so handling and alignment remain straightforward. By standardising checks with a physical gauge, calibration cycles and audit trails become simpler to manage, supporting consistent quality documentation. Practical benefits and maintenance advice Inspection tools such as this Go gauge are most valuable when integrated into a regular verification routine. Clean threads and a light protective oil film prolong service life; avoid excessive forcing during use to prevent wear at the working faces. The gauge is particularly suited to mechanical workshops, component suppliers and in-process inspection where quick, unequivocal decisions are required. For users seeking traceable calibration or adapted gauge sets, Metav Werkzeuge can advise on suitable procedures and complementary inspection equipment. Contact Metav Werkzeuge today for ordering details, calibration options and application advice — Metav Werkzeuge in Emmerich can support specification checks and provide tailored recommendations for inspection workflows Technical data SKU: M315.134.7 GTIN: 4054469124681 Label: Gewinde-Lehrring M34 x 2 mm gut DIN 13, f. metr. ISO-Feingewinde, rechts; 0,68 kg Numbers / core technical data Thread size: M34 x 2 mm Weight: 0.68 kg Tolerance: DIN 13, 6g Thread direction: right-hand Special features Material: gauge steel, hardened Function: Go (good) ring gauge for external threads Category: Gauges / Go gauges Tariff number: 90173000 FAQ What does the 6g tolerance mean for thread acceptance? The 6g classification denotes the external thread tolerance band as defined by DIN 13; the Thread ring gauge M34 x 2 mm (Go) verifies that the external thread falls within that acceptance zone. Is this a Go (good) gauge or a No-Go gauge? This product is supplied as a Go gauge; it confirms that an external thread is within the allowable maximum material condition for a metric ISO fine thread. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so that repeated checks remain reliable over time. Can the gauge be used in a production environment for daily checks? Yes, the M34 x 2 mm Go ring gauge is intended for routine shop-floor inspection and quick acceptance testing where fast, objective decisions are required. Who supplies and supports this gauge? The gauge is part of the Metav IndustryLine; Metav Werkzeuge can provide advice on selection and inspection routines for integration into production control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34x2 Thread Ring Gauge For Metric ISO Fine Thread Right-Hand DIN 13, 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauging steel construction and strict DIN 13 (6g) conformity for fast, repeatable thread verification; the M34 x 2 mm size and right‑hand geometry make this an effective control device for workshop and production inspection. Order via Metav Werkzeuge or consult our metrology team for application-specific advice. Thread Ring Gauge M34 x 2 mm — Right‑hand, DIN 13 (6g) by Metav IndustryLine The Thread Ring Gauge M34 x 2 mm is a precision control gauge for verification of metric ISO fine threads in production and incoming‑inspection routines. Hardened gauging steel construction Conforms to DIN 13, tolerance 6g Metric fine thread M34 x 2 mm Consistent pass/fail control for production throughput A ring gauge provides a direct, unambiguous check of external threads; the hardened gauging steel body resists wear and keeps tolerances stable over many inspection cycles. Because the device is produced to DIN 13 with a 6g tolerance, it offers a reliable benchmark against the nominal M34 x 2 mm specification, enabling quick acceptance or rejection decisions at the shop floor. The clear mechanical fit principle reduces subjective judgement, supporting a measurable increase in throughput and fewer downstream reworks. Durable design that reduces maintenance and downtime The gauge's heat‑treated construction and compact form factor are optimised for rugged workshop use. The combination of a hardened gauging material and a simple geometric profile keeps the maintenance requirement low while preserving dimensional integrity under repeated engagement. This results in fewer replacements and predictable inspection intervals, which contributes to lower total cost of ownership in medium‑volume and high‑volume environments. Practical integration into quality systems and routines As a mechanically straightforward instrument, the ring gauge is straightforward to incorporate into standard inspection plans and visualised quality flows. It is suitable for use as a go/no‑go control in first‑piece inspection, sampling plans, or final checks. The clear conformity to established standards supports traceable documentation and simplifies audit evidence for routine quality checks, making process control more transparent and defensible. Why this gauge supports production confidence Beyond the immediate measurement function, the gauge acts as a stable reference that helps harmonise quality decisions across operators and shifts. Its right‑hand metric ISO fine thread geometry and standardised tolerance class reduce ambiguity when multiple teams or suppliers are involved, strengthening cross‑departmental consistency. The robust construction and standards compliance therefore help maintain product quality without complex measurement devices. For specification matching and to discuss how the Metav IndustryLine M34 x 2 mm ring gauge can be deployed in inspection workflows, contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com for tailored advice and fast supply Technical data Article number: M315.234.7 GTIN: 4054469126340 Weight: 0.5 kg Size: M34 x 2 mm Standard: DIN 13, 6g Numbers / Core technical data Nominal diameter: 34 mm Thread pitch: 2 mm Tariff code: 90173000 eClass: 21170214 Special features / Versions Material: hardened gauging steel Thread form: metric ISO fine thread, right‑hand Category: Gauges / Lehren Intended use: production and incoming inspection FAQ What thread form does this gauge check? The ring checks metric ISO fine threads in the M34 x 2 mm form; the Metav IndustryLine ring gauge is manufactured to verify the external thread against DIN 13, tolerance class 6g. Is this gauge suitable for shop‑floor use in serial production? Yes, the hardened construction and standard tolerance class make the gauge well suited for repetitive use in production and sampling inspections. What is the article number for ordering or referencing? The article number is M315.234.7 and it corresponds to the Metav IndustryLine thread ring gauge for M34 x 2 mm threads. How does the DIN 13, 6g rating affect inspection limits? DIN 13 with a 6g tolerance defines the acceptance envelope for the external thread; using this ring gauge enforces that envelope directly at the control point. Can this gauge replace other dimensional checks in a basic inspection plan? The ring gauge provides a definitive go/no‑go check for external threads and complements other dimensional checks; it is intended as a quick verification tool within broader measurement and quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34x3 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The product data contains contradictory information that prevents a reliable product description from being generated; please verify the source data and resubmit. It is essential to ensure that all data provided is accurate, consistent, and free from discrepancies to facilitate the creation of a dependable product description. Conflicting details can lead to confusion and may hinder the ability to present the product effectively to potential customers. To resolve this issue, carefully review the source data, identify any inconsistencies, and make the necessary corrections before resubmitting. This will help ensure that the final product description is clear, precise, and trustworthy.
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com