Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M3.5x0.6 Thread Go Ring Gauge Metric ISO Thread Right-Hand DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise, standards‑compliant thread checks and robust, hardened construction to keep production and inspection running smoothly; the gauge confirms conformity to DIN 13 and tolerance 6g, supporting efficient go/no‑go decisions. Order the ring gauge directly via Metav Werkzeuge or ask the consultants for clarification on application and stock. Thread ring gauge M3.5 x 0.6 mm (Go) — Metav IndustryLine, DIN 13, hardened gauge steel A Thread ring gauge M3.5 x 0.6 mm (Go) designed for rapid verification of metric ISO standard threads (right‑hand), ideal for small‑format fasteners and repetitive assembly checks DIN 13, tolerance grade 6g Hardened gauge steel construction For M3.5 x 0.6 mm metric ISO threads Fast inline checks for small thread forms A compact go ring gauge such as this enables instant pass/fail decisions directly at the production line or in the inspection bay. The M3.5 x 0.6 mm size covers common small‑thread applications, allowing operators to confirm thread conformity without time‑consuming measuring steps. Because the gauge is built to the DIN 13 standard, it provides a consistent reference for acceptance criteria and reduces rework and assembly delays through clear, repeatable checks. Durable material for long service life and repeatability Manufactured from hardened gauge steel, the ring withstands the wear typical for frequent handling and insertion tests, preserving its functional profile over extended use. The robust construction ensures repeatable results: once set into routine inspection, the gauge keeps tolerance checks stable and reduces variability caused by worn tools. This longevity supports predictable maintenance cycles and lowers the total cost of ownership for quality equipment. Clear tolerance control tailored to production needs The gauge corresponds to tolerance grade 6g, matching the common acceptance band for many metric ISO threads and simplifying conformity decisions. As a Go (gut) gauge for right‑hand threads, it verifies whether an external thread falls within the maximum material condition allowed; parts that pass the go test can proceed to assembly, while failures trigger corrective inspection. This straightforward pass/fail logic speeds throughput and integrates smoothly with quality plans and control charts. Trusted partner benefits and practical fit‑for‑purpose design Sourced under the Metav IndustryLine label, this ring gauge aligns with the company’s commitment to making precision accessible to workshops and industry alike. Metav’s inventory and quality filtering at the Emmerich location mean dependable availability and consistent standards. The compact form factor and light mass also suit benchside inspection and small‑batch production, helping maintain a controlled workflow without heavy handling or elaborate fixtures. For dependable thread verification with Metav IndustryLine gauges, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability for a specific application and to place an order. Technical data Article number: M315.103.5 SKU: M315.103.5 GTIN: 4054469123707 Weight: 0.02 kg Manufacturer: Metav IndustryLine Norm: DIN 13, 6g Specifications Size: M3.5 x 0.6 mm Thread pitch: 0.6 mm Tolerance grade: 6g Tariff code: 90173000 Special features Type: Go (gut) thread ring gauge, right‑hand Material: hardened gauge steel Category: Gauges (Lehren) Application: verification of metric ISO standard threads Lightweight, compact form for benchtop inspection FAQ What does "Go" mean for this gauge? The Go ring gauge permits the maximum material condition of an external thread; the Thread ring gauge M3.5 x 0.6 mm (Go) confirms that a threaded part enters fully, indicating the thread is within acceptable maximum limits. Which tolerance and standard apply to this gauge? This gauge is manufactured to DIN 13 and corresponds to tolerance grade 6g, the common industrial band for metric ISO threads. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the ring is designed for frequent use and offers long service life while maintaining the defined functional profile. Is the gauge suitable for left‑hand threads? No — this item is specified as a right‑hand go ring gauge and is intended for standard right‑hand metric ISO threads. Can this gauge be used for serial production checks? Yes — the compact form and clear go/no‑go functionality make the gauge well suited to serial inspection tasks and inline quality control processes. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3.5×0.6 mm Go/No-Go Thread Plug Gauge Metric ISO Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Precise verification of metric ISO threads is achieved by combining hardened gauge steel and conformity to DIN 13, 6H tolerances, ensuring consistent go/no-go checks and low wear under frequent use. Order the Thread limit plug gauge directly via Metav Werkzeuge or request advice from our technical consultants for integration into existing quality control routines. Thread limit plug gauge M3.5 x 0.6 mm — limit plug gauge, hardened gauge steel (Metav IndustryLine) The Thread limit plug gauge M3.5 x 0.6 mm is a right-hand limit plug designed for rapid go/no-go checks of metric ISO threads in production and inspection environments Hardened gauge steel, high wear resistance For metric ISO threads M3.5 x 0.6, right-hand Conforms to DIN 13, 6H tolerance Fast, reliable thread verification on the shop floor A compact, single-piece limit plug gauge offers immediate, binary confirmation of thread conformity: the production thread either accepts the go side or it does not. Constructed from hardened gauge steel, this gauge maintains dimensional stability and wear resistance across repeated cycles, reducing downtime for frequent checks. The simple pass/fail nature speeds up inspection throughput while preserving traceability in batch-controlled manufacturing, supporting lean quality workflows and minimising rework. Measurable tolerance assurance for reproducible assemblies Built to DIN 13, 6H tolerance classes, the gauge is specified for the M3.5 x 0.6 mm ISO metric thread and finished for right-hand use. Conformity to the standard gives a clear technical basis for acceptance criteria in incoming inspection and in-process control. Using a standardised limit gauge removes ambiguity from visual assessments and caliper checks, delivering quantifiable compliance for assembly fit and functional reliability in small fasteners and fine-threaded components. Durable design for consistent repeatability and documentation With a nominal mass of 0.04 kg and a solid, hardened-steel construction, the tool resists edge deformation and retains gauge dimensions under typical workshop handling. The robust design supports frequent tactile checks without special fixtures, making it suitable for bench inspection, assembly stations and toolrooms. Where traceability is required, the gauge’s catalogued designation and SKU simplify documentation in quality records and inspection logs, supporting audits and process control. For precise thread inspection using hardened gauge steel and DIN‑compliant tolerances, contact Metav Werkzeuge in Emmerich for application guidance and procurement: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M315.003.5 GTIN: 4054469122038 Material: Gauge steel, hardened Thread designation: M3.5 x 0.6 mm, right-hand Weight: 0.04 kg Standard: DIN 13, 6H Tariff number: 90173000 Facts Thread: M3.5 x 0.6 mm Pitch: 0.6 mm Direction: Right-hand Weight: 0.04 kg GTIN: 4054469122038 Special features Hardened gauge steel construction Designed for go/no-go verification Conforms to DIN 13, 6H tolerance class Category: Gauges; Measuring pins FAQ What is the primary use of this gauge? The Thread limit plug gauge M3.5 x 0.6 mm is used for quick go/no-go verification of metric ISO threads to confirm conformity with the specified tolerance class. Does the gauge indicate pitch and direction? Yes. The tool is specified for M3.5 x 0.6 mm pitch and is manufactured for right-hand threads. Which standard does the gauge comply with? This limit plug gauge is manufactured to match DIN 13, 6H tolerances for ISO metric threads. How should the gauge be handled and stored to preserve accuracy? Handle with care to avoid impacts; store in a dry, protected area to prevent corrosion and mechanical damage that could affect the gauge’s seating and edge geometry. Can this gauge be used for assembly checks on small fasteners? Yes. The M3.5 x 0.6 mm designation makes it suitable for inspection and acceptance checks of small threaded fasteners and precision components. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3.5×0.6 Thread Go Ring Right-Hand Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 compliance, hardened gauge steel and the clear go/no‑go function to keep thread checks fast and reproducible; order the thread ring gauge directly via Metav Werkzeuge or consult the team in Emmerich for application advice. Thread ring gauge M3.5 x 0.6 — No‑go, DIN 13 (Metav IndustryLine) A Thread ring gauge M3.5 x 0.6 intended for right‑hand metric ISO regular threads, designed to verify internal thread conformity in production and quality control. Hardened gauge steel for long service life DIN 13 tolerance class 6g No‑go ring for reject verification Ensure repeatable thread inspection on the shop floor The ring is manufactured from hardened gauge steel, providing resistance to wear and a stable measuring surface over many cycles. As a no‑go ring, it serves the specific purpose of detecting oversize or incorrectly formed internal threads, preventing non‑conforming components from continuing down the value chain. Compliance with DIN 13 and the incorporated 6g tolerance gives a clear benchmark that aligns with international thread standards; this removes ambiguity during inspection and supports consistent acceptance criteria in serial production. Fast, standards‑based checks that integrate into inspection routines Designed for metric ISO regular threads with a nominal size of M3.5 x 0.6, the gauge simplifies go/no‑go decisions and reduces measurement time compared with full metrological analysis. The simple pass/fail character of this tool accelerates line control and final inspection while maintaining documented conformity to the relevant thread standard. The robust construction and compact form factor allow repeated handling in production environments without loss of functional integrity, supporting throughput without compromising quality. Practical benefits for quality teams and maintenance planning The compact ring format places emphasis on usability and traceability: the small footprint eases storage and deployment at the workstation, and the clear designation as a no‑go ring removes room for misinterpretation. For repair benches and small-series manufacturing, the gauge offers a pragmatic balance between reliability and operational speed, making it a sensible choice for incoming inspection, in‑process checks or final control before assembly. The ring's light weight and durable finish also reduce wear on thread contacts and lower the need for frequent replacement. For reliable thread verification with Metav IndustryLine quality, order this M3.5 no‑go ring via Metav Werkzeuge and benefit from local stock and technical guidance from Emmerich. Technical data SKU: M315.203.5 GTIN: 4054469125374 Size: M3.5 x 0.6 Material: hardened gauge steel Standard: DIN 13, 6g Weight: 0.1 kg Facts Nominal diameter: 3.5 mm Pitch: 0.6 mm Tolerance class: 6g Thread direction: right‑hand Category path: Measuring devices › Gauges Special features Type: No‑go (reject) ring gauge Application: Metric ISO regular thread verification Compact design for workshop use Manufacturer family: Metav IndustryLine FAQ What is the purpose of a no‑go ring gauge? A no‑go ring gauge is used to identify internal threads that exceed maximum material limits; the Thread ring gauge M3.5 x 0.6 (Metav IndustryLine, SKU M315.203.5) will not fit if a thread is oversize, signalling rejection. Is this gauge compliant with recognised standards? Yes, the ring conforms to DIN 13 with a 6g tolerance class, so the Metav IndustryLine gauge is suitable for standardised acceptance criteria for metric ISO threads. Which materials is this gauge suitable for testing? The tool inspects the geometry of internal threads regardless of component material; the ring itself is made from hardened gauge steel to withstand repeated engagement with threads in steel, aluminium or other common workshop materials. How should the ring gauge be used in a production environment? Use the ring during incoming inspection or in‑process checks: attempt to screw the gauge onto an internal thread — if the no‑go ring engages, the part fails; if it is clearly rejected, the part passes the no‑go criterion. The Thread ring gauge M3.5 x 0.6 is intended for quick go/no‑go verification, not for dimensional measurement. Can the gauge be used for calibration or is it only a working standard? This ring is a working gauge for go/no‑go inspection. For traceable calibration, consult Metav Werkzeuge about available calibration services and documentation for Metav IndustryLine gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30x1 Thread Gauge Ring Right-Hand Metric ISO Fine Pitch, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Compact hardened construction and DIN-grade tolerancing combine to deliver reliable thread verification and long service life; the hardened gauge steel body and conformity to DIN 13, 6g make this a dependable choice for production and incoming inspection. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M30 x 1 mm — right-hand, hardened gauge steel, DIN 13 (6g) — Metav IndustryLine The Thread ring gauge M30 x 1 mm is a hardened inspection gauge for quick verification of metric ISO fine threads in production environments and quality control stations Hardened gauge steel construction For metric ISO fine thread M30 x 1 Tolerance DIN 13, grade 6g Right-hand thread verification Precise conformity for repeatable inspection The Thread ring gauge M30 x 1 is engineered to verify metric ISO fine threads with the conformity required by production inspection. Manufactured to DIN 13 with 6g tolerance, the ring provides a simple go/no-go decision for acceptance testing. The hardened gauge steel body resists wear and retains dimensional stability, reducing measurement scatter and supporting reproducible quality control during serial production. Robust design that reduces downtime Presented as a right-hand M30 x 1 ring, the gauge balances rigidity with easy handling on the shop floor. Its compact mass (approx. 0.38 kg) helps avoid chatter during engagement while remaining straightforward to place in test fixtures or manual checks. The hardened construction minimises maintenance intervals, extending service life and lowering the need for frequent replacements in busy inspection routines. Easy integration into quality workflows As a standardised thread ring, the gauge fits established inspection procedures for incoming goods, in-process sampling and final checks. The DIN-class tolerance facilitates clear documentation and traceability, so acceptance criteria can be applied consistently across shifts and production sites. Marking or identification on the gauge supports record keeping and audit trails, helping to maintain demonstrable conformity with inspection plans. For dependable thread verification with Metav IndustryLine gauges, contact Metav Werkzeuge in Emmerich for product advice and reliable supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.230.4 Label: Gewinde-Lehrring M30 x 1 mm Aussch. DIN 13, f. metr. ISO-Feingewinde, rechts GTIN: 4054469126210 Facts Thread size: M30 x 1 Weight: 0.38 kg Tariff number: 90173000 Materials & features Material: Gauge steel, hardened Standard: DIN 13, 6g Thread hand: Right-hand Category: Gauges / Thread gauges FAQ Is this gauge suitable for M30 x 1 metric fine threads? Yes. The M30 x 1 thread ring gauge is specifically manufactured for metric ISO fine threads and provides go/no-go verification for that size. Which tolerance and standard does the gauge conform to? The ring conforms to DIN 13 with a 6g tolerance class, giving a clear acceptance criterion for inspection. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the M30 ring delivers high wear resistance and long service life under routine inspection use. Can this gauge be used in fixture-based inspection systems? Yes. The standardised dimensions and compact design allow straightforward integration into fixtures, sampling plans and incoming inspection layouts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30x1 Thread Ring Gauge Go, Metric ISO Fine Thread Right Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Reliable thread acceptance in production is achieved by combining a Go ring for M30 x 1 threads, conformity to DIN 13, 6g, and a hardened gauge steel construction; order directly via Metav Werkzeuge or ask our consultants for application advice. Thread gauge ring M30 x 1 mm (Go) — DIN 13 / 6g, hardened gauge steel The Thread gauge ring M30 x 1 mm (Go) is a compact Go ring designed for rapid quality checks of metric ISO fine threads in production and inspection environments, suitable for right‑hand M30×1 connections. DIN 13, 6g conformity for metric threads Hardened gauge steel for wear resistance Right‑hand M30 x 1 fine thread Rapid, objective acceptance for threaded parts A Go ring provides an immediate pass/fail signal, enabling swift decisions at the machine or inspection bench. The use of a dedicated Go ring for M30 x 1 threads removes subjective interpretation from thread checks: the gauge either fits (accept) or it does not (reject). This direct measurement method reduces cycle time during sampling and supports consistent throughput in serial production. The compact form factor and straightforward verification process make it a practical choice for line‑side quality control and first‑off inspections. Built to resist shopfloor demands Constructed from hardened gauge steel, the ring is engineered to withstand repeated engagement without premature wear, maintaining repeatability across many cycles. The robust material choice delivers long service life and low maintenance, which helps to keep inspection costs predictable. At just 0.17 kg, the tool is easy to handle while remaining stable in use, so benchworkers can perform quick checks without specialised fixtures. When combined with routine inspection protocols, the durable design helps retain measurement integrity over time. Conforms to standards for interchangeability Manufactured to DIN 13 with tolerance class 6g, the ring is matched to the standard requirements for metric ISO fine threads. Compliance with this norm ensures that parts accepted with the gauge meet industry expectations for fit and compatibility with mating components. Using a gauge aligned to established standards supports downstream assembly reliability and reduces the risk of costly rework or part rejection during customer audits. The right‑hand thread specification makes this ring suitable for the common fine‑pitch M30 applications found in mechanical and hydraulic assemblies. Practical integration into quality workflows The ring excels as a rapid check during in‑process inspection, final inspection or incoming goods control. Its simple pass/fail output allows it to be used for sampling plans or as a controllable go/no‑go step in standard operating procedures. Incorporating this type of gauge into a quality system contributes to traceable decision making and fewer unexpected assembly problems. For workshops seeking a reliable, low‑complexity instrument to safeguard thread quality, this gauge delivers clear operational benefits and supports lean inspection routines. For a tailored recommendation or to secure the Metav IndustryLine thread gauge ring M30 x 1 mm (SKU M315.130.4) for production use, contact Metav Werkzeuge in Emmerich to discuss exact application requirements and availability. Technical data Article number: M315.130.4 GTIN: 4054469124551 Manufacturer: Metav IndustryLine Facts Thread size: M30 x 1 mm Weight: 0.17 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, 6g Type: Go thread gauge ring Thread direction: right‑hand Category: ring gauge for metric ISO fine threads FAQ What is the primary use of this ring gauge? The ring gauge is intended for quick go/no‑go checks of metric ISO fine threads; the Thread gauge ring M30 x 1 mm (Go) verifies whether M30 x 1 right‑hand external threads meet the specified acceptance condition. Does the gauge follow any standard for threads? Yes, the ring is manufactured to DIN 13 with tolerance class 6g, aligning the gauge to the common standard for metric ISO fine threads and ensuring interchangeability with compliant parts. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the gauge is designed for durable use on the shopfloor and maintains dimensional stability under normal handling and repeated engagement. Can this gauge be used for functional assembly checks? The Go ring gives a direct acceptance signal suitable for functional verification of threaded parts intended to mate with M30 x 1 internal threads; it is commonly used in final inspection and incoming goods control. What is the SKU for ordering and stock reference? The product is listed under SKU M315.130.4 and is supplied as the Metav IndustryLine Go ring for M30 x 1 threads. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30x1.5 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a precision M30 x 1.5 thread control that meets DIN 13 tolerance 6g and is made from hardened gauge steel for consistent pass/fail verification; procure the gauge directly from Metav Werkzeuge or request application advice from our technical consultants. Thread ring gauge M30 x 1.5 'Go' — Thread gauge (DIN 13, 6g) by Metav IndustryLine The Thread ring gauge M30 x 1.5 'Go' is a precision pass gauge for quick verification of metric ISO fine threads (right-hand), designed for production-line inspection and QA sampling. DIN 13 tolerance 6g Hardened gauge steel construction Right-hand M30 x 1.5 'Go' gauge Compact 0.32 kg for easy handling Fast, standard-compliant inspection that safeguards production flow A compact, standards-based go gauge speeds up routine checks while reducing ambiguous results at the gauge table. Conformity to DIN 13 with 6g tolerance makes the device suitable for metric ISO fine-thread inspection in machining and assembly environments, ensuring repeatable acceptance criteria. The benefit is immediate: fewer disputed parts, faster go/no-go decisions and less time spent reworking borderline components, which translates into improved throughput and lower scrap rates. Robust construction for repeatable measurements and long service life Made from hardened gauge steel, the ring resists wear and preserves the calibrated thread form over many inspection cycles. Mechanical stability and the chosen material reduce dimensional drift, so measurement integrity is maintained even under frequent handling. For workshops and inspection labs this means longer intervals between maintenance or replacement and more predictable quality assurance, supporting reliable production planning and fewer unexpected interruptions. Easy integration into quality workflows and simple handling benefits The ring’s M30 x 1.5 geometry and right-hand orientation match common fine-thread components, allowing quick substitution into existing inspection jigs and gauges. Its lightweight construction (approx. 0.32 kg) supports single-person handling at the inspection bench, accelerating routine sampling. The result is lower operator fatigue and a smoother inspection routine, with the practical advantage that the tool can be stored or moved without specialised equipment. Contact Metav Werkzeuge for application advice on Metav IndustryLine gauges and secure a DIN 13-compliant M30 x 1.5 'Go' ring for your inspection process — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and prompt delivery Technical data Article number / SKU: M315.130.6 GTIN: 4054469124568 Size: M30 x 1.5 Weight: 0.32 kg Facts Tolerance: 6g (DIN 13) Thread pitch: 1.5 mm Nominal diameter: 30 mm Orientation: right-hand Special features Type: 'Go' thread ring gauge for pass inspection Material: hardened gauge steel Standard: DIN 13 compliant Category: Gauges / Thread ring gauge FAQ What does the 'Go' designation mean for this gauge? The 'Go' designation identifies this ring as a pass gauge: components that enter the ring without binding meet the acceptance limits defined for the nominal size and tolerance class. Which standard and tolerance class does the gauge follow? This gauge conforms to DIN 13 with tolerance 6g, suitable for metric ISO fine-thread checks on production and inspection units. What material is the ring made from and why does it matter? The ring is manufactured from hardened gauge steel, chosen for wear resistance and dimensional stability so that thread form and conformity remain reliable over many inspection cycles. Can the gauge be used for left-hand threads? No, this ring is produced for right-hand threads; left-hand applications require a corresponding left-hand gauge. Is this gauge suitable for integrating into inspection fixtures? Yes. The M30 x 1.5 geometry and compact form factor allow straightforward integration into existing jigs and sampling fixtures used for fine-thread components. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30x2 Thread Go Ring Gauge ISO Metric Fine Pitch Right-Hand DIN 13, Hardened Gauge Steel - Metav IndustryLine
Take advantage of fast, unambiguous thread inspection with a go gauge that conforms to DIN 13 and tolerance class 6g; the hardened gauge steel construction ensures durable repeatability for routine quality checks. Order or request advice via Metav Werkzeuge for a tailored supply solution. Thread Ring Gauge M30 x 2 mm (go) – Metric ISO fine thread, DIN 13 – Metav IndustryLine The Thread Ring Gauge M30 x 2 mm (go) is a precision 'go' ring for right‑hand metric ISO fine threads, designed for rapid pass/fail inspection in production and incoming‑goods control. Hardened gauge steel for long life DIN 13 tolerance class 6g M30 x 2 mm metric ISO fine thread Right‑hand 'go' thread inspection Rapid, reliable pass/fail control for shop‑floor QC A dedicated go ring accelerates routine inspection by providing an immediate binary result: parts that enter the ring are acceptable, parts that do not require further evaluation. The combination of the M30 x 2 mm nominal size and conformity to DIN 13 with tolerance class 6g makes this ring ideal for fine‑pitch metric threads commonly found in hydraulics, instrumentation and precision fastenings. Using a ring gauge for first‑level control reduces measurement time compared with full coordinate or profile inspection, helping to keep assembly lines flowing and reject rates low without sacrificing traceability. Durable construction that keeps inspection costs down Manufactured from hardened gauge steel, the ring resists wear and preserves thread form over prolonged use, which lengthens service intervals and reduces replacement frequency. The compact mass (approx. 0.35 kg) and solid design make handling straightforward on the shop floor while maintaining the stiffness required to avoid false results caused by deformation. For quality environments where repeatability matters, the material choice and heat treatment together deliver a robust inspection tool that maintains fit tolerances under intensive daily use. Standards compliance to support documented quality systems Conformity to DIN 13 and the specified tolerance class (6g) provides a clear, auditable basis for pass/fail decisions and integrates cleanly with manufacturing documentation and inspection plans. The ring’s designation for metric ISO fine threads aligns it with international fastener standards, simplifying quality gate definitions across suppliers and production sites. Where records are required, the gauge’s standardised specification supports consistent acceptance criteria and reduces interpretation errors in audits or supplier assessments. Practical application and workflow benefits This right‑hand go ring is intended for use in quick acceptance checks on batches, incoming goods or during final assembly verification. Fit checks carried out with a dedicated ring avoid over‑reliance on operator judgement and accelerate throughput at inspection points. The tool is particularly suitable for repetitive checks where the primary objective is to confirm that internal thread form and pitch meet the required limits; items that fail the ring proceed to full measurement or rework as defined in the inspection procedure. Beyond efficiency gains, the device fosters confidence in delivered parts and streamlines communication between production and quality teams. Select the Metav IndustryLine M30 x 2 mm go ring for dependable shop‑floor decisions — contact Metav Werkzeuge for technical advice or to place an order: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M315.130.7 GTIN: 4054469124575 Label: Gewinde‑Lehrring M30 x 2 mm gut DIN 13, f. metr. ISO‑Feingewinde, rechts; 0,35 kg Data Thread: M30 x 2 mm Pitch: 2 mm Weight: 0.35 kg Tolerance class: 6g Special features Material: Gauge steel, hardened Type: Right‑hand 'go' ring gauge Standard: DIN 13 Tariff number: 90173000 Manufacturer: Metav IndustryLine FAQ What does the term "go" mean for this ring gauge? The 'go' designation indicates that the ring is used for a pass test: a thread that fully enters the Thread Ring Gauge M30 x 2 mm (go) is considered to meet the specified limits under DIN 13 and the 6g tolerance class. Which tolerance class is this gauge intended for? This ring corresponds to tolerance class 6g as defined in DIN 13, suitable for standard metric ISO fine threads where the acceptance limit is set by that class. Can this ring be used for left‑hand threads? No — the product is designed for right‑hand metric threads; left‑hand thread inspection requires a specifically‑manufactured left‑hand gauge. How should the gauge be used during a routine inspection? Use the ring for quick go/no‑go checks at inspection points: a successful entry signifies conformity, while a failure prompts full measurement or segregation according to the inspection plan; document results in the standard quality log. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30x2 Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Combining precise verification for M30×2 metric ISO fine threads, a hardened gauge steel construction and conformity to DIN 13 (6H), this limit thread plug gauge secures consistent thread quality and reduces scrap and rework. Order the limit thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug gauge M30×2 — right‑hand, DIN 13 (6H) by Metav IndustryLine A Limit thread plug gauge M30×2 designed for right‑hand metric ISO fine threads to verify internal thread conformity during production and inspection. Metric ISO fine thread M30×2 verification Hardened gauge steel for long service life Manufactured to DIN 13, tolerance class 6H Right‑hand thread geometry, ready for inspection Ensure reproducible thread acceptance with clear go/no‑go control The M30×2 limit thread plug gauge provides a straightforward, reproducible check of internal thread quality. By offering a defined limit measurement rather than a subjective visual inspection, the gauge supports rapid pass/fail decisions at the production line. This reduces downstream rework, improves first‑time quality and shortens inspection cycles — advantages that translate into measurable productivity gains for batch production and assembly processes. Robust materials and construction for stable metrology performance Made from hardened gauge steel, the plug gauge resists wear and maintains dimensional stability under frequent use. The compact mass (approx. 0.3 kg) and solid finish make handling and storage uncomplicated while ensuring the measuring faces retain fit accuracy. These attributes result in longer service intervals, fewer replacements and a lower total cost of ownership compared with softer or unprotected gauges. Standards compliance that simplifies documentation and audits Conformity to DIN 13 (6H) places the gauge directly into standard inspection routines for metric ISO threads, providing auditors and quality managers with a clear reference point. The right‑hand thread form and specified pitch match common engineering practice for fine‑threaded fastenings, enabling consistent sampling plans and traceable acceptance criteria within documented quality systems. Practical integration into workshop and inspection workflows Compact and purpose‑built, this limit gauge suits both shop‑floor checks and fixed inspection benches. The design is optimised for quick engagement with threaded bores so technicians can complete checks with minimal set‑up time. Where routine sampling is required, the gauge complements existing metrology kits and reduces the cognitive load on operators by delivering an unequivocal fit result without additional measurement interpretation. For reliable thread verification and to secure consistent production quality, contact Metav Werkzeuge for the M30×2 limit thread plug gauge or request tailored application advice from our specialists Technical data Article number: M315.030.7 GTIN: 4054469122908 SKU: M315.030.7 Numbers / Core data Thread size: M30 × 2 mm Nominal weight: 0.3 kg Tariff number: 90173000 Special features / Design Material: hardened gauge steel Standard: DIN 13, tolerance class 6H Right‑hand metric ISO fine thread Category: limit thread plug gauge (internal thread verification) FAQ What thread size does this gauge verify? The limit thread plug gauge checks M30×2 internal threads; the item is listed as SKU M315.030.7 for clear identification. Which tolerance and standard does the gauge follow? Inspection is performed to DIN 13 (6H) tolerance class, ensuring the gauge aligns with common metric ISO thread acceptance criteria. What material and durability can be expected? Constructed from hardened gauge steel, the gauge is designed for prolonged service life and stable measuring performance under repeated use. Where is this plug gauge typically used? The device is intended for production and inspection environments where rapid go/no‑go verification of internal metric threads is required, such as machine shops and quality control benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30x2 Thread Ring Gauge Go, ISO Fine Thread, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise thread verification with a hardened gauge-steel construction and conformity to DIN 13 (6g) for reliable acceptance decisions on ISO fine threads; order directly via Metav Werkzeuge or consult our specialists for integration into production. Thread ring gauge M30 x 2 mm — hardened gauge steel, DIN 13 (6g) The Thread ring gauge M30 x 2 mm is a right-hand ring gauge for verification of M30×2 ISO fine threads, designed for repeatable inspection in workshop and production environments Hardened gauge steel construction DIN 13 tolerance class 6g For M30 x 2 mm ISO fine threads Compact mass 0.38 kg for practical handling Ensure conformity with recognised thread standards The ring gauge is engineered to the DIN 13 standard with 6g tolerance, providing a clear, objective check of fine-thread conformity. Using a standardised acceptance gauge simplifies quality decisions during incoming inspection and final assembly, reducing rework and scrap. The hardened construction keeps dimensional stability under frequent use, so inspection results remain consistent from the first part batch to long production runs. This measurable standard helps maintain process reliability across serial production. Durable material and practical handling for workshop use Manufactured from hardened gauge steel, the tool resists wear that would otherwise affect thread evaluation over time. The compact 0.38 kg mass gives good balance and ease of positioning on the workbench, making repeated checks less tiring and more efficient. The right-hand orientation matches standard ISO metric threads, enabling straightforward pass/fail checks without additional adapters. The solid build supports frequent use in machine shops, maintenance departments and quality labs where robust, repeatable gauges are required. Clear application for ISO fine-thread inspection Designed specifically for M30 x 2 mm ISO fine threads, the gauge provides an unequivocal verification method for internal thread acceptance during production and assembly control. By checking the mating external thread against the ring gauge, the workshop can confirm thread form and pitch conformity quickly. The simple mechanical inspection method complements more elaborate measurement systems by offering immediate go/no-go feedback for fast decision-making in the production flow. Practical integration into quality routines and traceability The ring gauge fits easily into standard inspection routines, where it acts as a rapid, objective check before parts proceed to subsequent operations. Its category and SKU allow seamless inventory and traceability in quality documentation, while the compact form supports storage in inspection kits. When combined with Metav’s supply and advisory services, the gauge becomes part of a dependable measurement chain that supports efficient quality control and audit processes. Select the Metav IndustryLine gauge from Metav Werkzeuge for reliable thread verification and contact our Emmerich team to discuss batch quantities or specification matching Technical data Article number: M315.230.7 GTIN: 4054469126234 Tariff number: 90173000 Facts Weight: 0.38 kg Thread size: M30 x 2 mm Standard: DIN 13, 6g Special features Material: gauge steel, hardened Thread form: ISO fine thread, right-hand Category: Thread ring gauge (Lehre) FAQ What is the purpose of this ring gauge? The ring gauge is used for pass/fail verification of external threads to ensure conformity with M30 x 2 mm ISO fine-thread specifications under DIN 13 (6g) Is the gauge suitable for production use or only for sample checks? The hardened construction and standard tolerance class make the gauge suitable for both routine production checks and sample inspections in workshops and quality departments What material is the gauge made from and why does that matter? Made from hardened gauge steel, the gauge resists wear and maintains dimensional stability, ensuring repeatable inspection results over extended use How is the right-hand orientation relevant? The right-hand orientation matches standard ISO metric external threads, enabling direct verification without additional adapters or modifications Does the product include traceability identifiers? The article is supplied with the SKU and GTIN as part of inventory and documentation procedures to support traceability in quality records Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30x3 Limit Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Conflicting product data detected: the item is marked both as scrap and as acceptable, so a reliable product description cannot be generated. This inconsistency in the product status creates challenges in determining its usability and classification. Please check the source data thoroughly to identify the root cause of the conflicting information and correct the inconsistent status. Ensuring accurate and consistent data is crucial for generating a dependable product description and avoiding potential errors in inventory management or customer communication. Addressing this issue promptly will help maintain data integrity and streamline operational processes effectively.
M30x3 Thread Go Gauge ISO Metric Fine Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of hardened gauge steel construction, strict DIN 13 (6g) conformity and the clearly defined M30 x 3 mm thread form for consistent production inspection; order directly via Metav Werkzeuge or consult our specialists for selection and supply. Thread ring gauge M30 x 3 mm — Metric ISO fine thread gauge, DIN 13, Metav IndustryLine The Thread ring gauge M30 x 3 mm is a hardened inspection gauge for right‑hand metric ISO fine threads, designed for rapid go/no‑go verification and routine quality assurance in production and incoming‑goods inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M30 × 3 mm metric fine threads Reliable conformity for routine inspection Manufactured from hardened gauge steel, this ring provides a durable reference surface suited to workshop and shop‑floor environments where repeatability matters. The device is produced to DIN 13 with tolerance class 6g, making it suitable for standard external metric threads. Using a defined, hardened material reduces wear and dimensional drift during repeated checks, which supports consistent acceptance criteria during batch inspections and helps maintain downstream assembly quality. Fast, practical checks that protect production flow Designed for rapid verification, the ring enables efficient assessment of threaded parts without complex setup. The compact, single‑piece form ensures simple handling and quick cycle times during quality control, reducing inspection bottlenecks. As a result, process engineers and inspectors can maintain throughput while keeping rejection rates low, converting precise measurement capability into tangible production reliability. Clear technical specification that supports decision making The gauge is calibrated to the M30 x 3 mm metric fine thread profile and marked to show its conformity to the standard. Weight and dimension data are compact enough for straightforward handling (weight: 0.38 kg), and the right‑hand form matches common thread orientations encountered in mechanical assemblies. These measurable properties provide a transparent basis for procurement decisions and for inclusion in inspection plans and control charts. Practical benefits and workshop integration As a workshop tool, the ring gauge is intended for regular use in manufacturing, assembly and incoming inspection environments where metric ISO threads are processed. Its robust design reduces the need for frequent replacement, while the visible standard marking simplifies traceability in record keeping. Combined with Metav’s logistics and advisory services, the gauge becomes part of a predictable, low‑risk inspection routine that supports quality assurance across the production chain. For reliable thread inspection in production, choose the Metav IndustryLine M30 x 3 mm ring gauge and contact Metav Werkzeuge for supply and expert advice from Emmerich. Technical data Article number: M315.230.8 SKU: M315.230.8 GTIN: 4054469126241 Weight: 0.38 kg Material: hardened gauge steel Thread: M30 × 3 mm Hand: right‑hand Standard: DIN 13, 6g Tariff number: 90173000 Numbers / Core technical data Nominal diameter: 30 mm Pitch: 3 mm Mass: 0.38 kg GTIN numeric: 4054469126241 Tariff code: 90173000 Special features / Versions Hardened gauge steel construction Metric ISO fine thread profile, right‑hand Conformity marking to DIN 13, tolerance 6g Category: Gauges / Inspection tools Suitable for routine production and incoming inspection FAQ What thread size and pitch does this gauge check? The ring gauge checks the M30 x 3 mm metric fine thread profile; the nominal diameter and pitch are stamped and conform to the DIN 13 specification for external threads. Is the gauge suitable for right‑hand threads only? Yes, this hardened ring is manufactured for right‑hand metric ISO fine threads and is identified accordingly for correct use in inspection routines. What standard and tolerance class does the gauge meet? The gauge is produced to DIN 13 with a tolerance class of 6g, providing a standardised acceptance criterion for external metric threads. What material is the gauge made from and why does that matter? Manufactured from hardened gauge steel, the ring retains dimensional stability and wear resistance under repeated use, which preserves inspection accuracy over time. Can this gauge be used on the shop floor for incoming inspection? Yes, the robust construction and clear standard marking make it well suited to production, assembly and incoming‑goods inspection tasks where quick verification is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30x3 Thread Ring Gauge Go Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a precise go acceptance check for external threads with the combination of M30×3 sizing, DIN 13 tolerance class 6g, and hardened gauge steel for long-term repeatability; order the gauge directly via Metav Werkzeuge or consult our advisors for application support. Thread ring gauge M30 x 3 mm (go) — DIN 13, 6g | Metav IndustryLine Thread ring gauge M30 x 3 mm (go) for quick acceptance testing of external metric ISO fine threads in production and incoming inspection environments. Go ring for M30 x 3 metric fine threads Conforms to DIN 13, tolerance class 6g Hardened gauge steel for long service life Compact weight 0.49 kg for robust handling Ensure correct thread acceptance without compromises A dedicated go ring gauge in M30×3 offers a fast, unambiguous check whether an external thread meets the required dimensional and tolerance criteria. The tool provides a simple go/no‑go principle: the go member verifies that the thread falls within the lower tolerance limit defined by DIN 13 and tolerance class 6g, enabling line operators and inspectors to make immediate, reproducible decisions. This reduces rework and prevents assembly problems caused by marginal threads, improving throughput in serial production. Built for repeatability and workshop conditions Manufactured from hardened gauge steel, the ring resists wear and preserves the critical gauge diameter over repeated use, ensuring repeatable measurements shift after shift. The compact mass of 0.49 kg supports stable handling and tactile feedback during a fit check, while the right‑hand metric ISO fine thread form matches common fastening standards. Robust construction and a clear conformity to standards minimise uncertainty in routine inspections and extend the interval between gauge verifications. Practical integration into quality routines The ring is supplied as a purpose‑built inspection tool compatible with standard shop‑floor procedures. It suits quick go checks at the machine exit, incoming inspection at goods receipt, or final assembly control where rapid verification of thread conformity prevents downstream failures. Traceable identification such as the SKU and GTIN can be recorded in quality documentation to link inspection results directly to the physical gauge used during each acceptance test, supporting auditability and process control. Contact Metav Werkzeuge today to discuss Metav IndustryLine’s M30×3 go ring for your inspection workflow or request tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.130.8 SKU: M315.130.8 GTIN: 4054469124582 Customs tariff number: 90173000 Facts Thread size: M30 x 3 mm Weight: 0.49 kg Standard: DIN 13 Tolerance class: 6g Special features Right‑hand metric ISO fine thread Go (acceptance) ring gauge Material: gauge steel, hardened Category: Gauges / Thread gauges FAQ What does the go designation mean for this gauge? The go designation indicates this ring is the acceptance member for external threads; the M30×3 go ring will pass correctly formed external threads and thus confirms conformance to the thread limits specified by DIN 13 and 6g. Can this ring be used for left‑hand threads? No, this ring is manufactured for right‑hand metric ISO fine threads; left‑hand applications require a specifically produced left‑hand gauge. How is the gauge identified for records and traceability? The ring carries the SKU M315.130.8 and GTIN 4054469124582 for direct inclusion in inspection records and quality documentation. Is the material suitable for high‑use shop environments? Yes, the ring is made of hardened gauge steel to resist wear and maintain dimensional stability under frequent use. Which standard does the gauge comply with? The thread form and tolerance correspond to DIN 13, tolerance class 6g, intended for metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30x3.5 Limit Ring Gauge Metric ISO Thread Right Hand DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Product data contains a contradiction: the item is indicated as both rejected and as acceptable. This inconsistency in the quality status creates confusion and may lead to errors in the product description or its subsequent use. To ensure accuracy and reliability, it is essential to verify the source information thoroughly. Please review the relevant documentation, cross-check the details, and correct the quality status accordingly. Resolving this issue will help generate a clear and dependable product description, avoiding potential misunderstandings or complications in future processes. Accurate data is crucial for maintaining quality standards and ensuring seamless operations.
M30x3.5 Thread Ring Gauge Right-Hand ISO Metric Thread DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Combine the DIN 13 tolerance class with hardened gauge steel and a clear M30 × 3.5 mm designation for fast, repeatable thread checks; order the gauge directly via Metav Werkzeuge or contact the technical advisers for tailored inspection guidance. Thread Ring Gauge M30 × 3.5 mm (DIN 13, 6g) — Metav IndustryLine The Thread Ring Gauge M30 × 3.5 mm is a hardened limit gauge for go/no-go verification of metric ISO regular threads (right-hand), designed for inline quality control and workshop use. Hardened gauge steel construction DIN 13, tolerance grade 6g For M30 x 3.5 mm metric ISO threads Right-hand thread limit gauge Accurate tolerancing for reliable production control The ring gauge performs rapid go/no-go checks to verify the external threads of machined parts against the DIN 13 standard and the 6g tolerance grade. By confirming major diameter and pitch conformity in a single action, the device reduces measurement cycle time and avoids time‑consuming secondary inspections. The clear pass/fail concept makes the gauge ideal for batch control and repeated checks on the shop floor, supporting measurable improvements in process throughput and scrap reduction. Robust design reduces maintenance and downtime Manufactured from hardened gauge steel, the gauge resists wear from repeated engagement with threaded parts and maintains dimensional stability under frequent use. The hardened material and precise manufacturing process ensure consistent contact geometry for each verification, which lowers the need for adjustment and extends service life. For standard quality-control routines, the ring gauge offers a pragmatic combination of durability and low maintenance, ensuring reliable limit checks shift after shift. Practical applications and inspection integration This ring gauge suits production, assembly and incoming‑goods inspections where conformity to metric ISO threads must be confirmed quickly. The gauge complements optical or digital measurement systems by providing a fast binary check that flags non-conforming parts before assembly. Its compact, single‑piece design facilitates storage and handling in tool cabinets or inspection stands, and it is compatible with standard fixture layouts for rapid deployment in existing inspection workflows. For dependable thread verification choose the Metav IndustryLine ring gauge; contact Metav Werkzeuge for precise ordering information and expert application advice. Technical data Article number: M315.230 GTIN: 4054469126203 Manufacturer: Metav IndustryLine Facts Thread designation: M30 x 3.5 mm Pitch: 3.5 mm Tolerance: 6g Standard: DIN 13 Thread hand: Right-hand Tariff number: 90173000 Special features Material: Gauge steel, hardened Type: Thread ring gauge (limit gauge) Application: Metric ISO regular threads Categories: Gauges; Measuring pins FAQ What does the 6g tolerance mean for inspection? The 6g grade defines the permissible manufacturing tolerance for the external thread; the Thread Ring Gauge M30 × 3.5 mm (Metav IndustryLine, SKU M315.230) checks that the part falls within that specification by a direct go/no-go test. Is this gauge suitable for series production use? Yes, the hardened construction and limit‑gauge principle make this ring gauge suitable for routine series inspections and in‑line quality checks where rapid pass/fail decisions are required. Does the gauge indicate pitch errors as well as diameter deviations? The ring gauge primarily verifies the fit of the external thread form against the nominal profile (including pitch and major diameter as part of the limit check); gross pitch errors that prevent proper engagement will be indicated by a fail result. Can this gauge be used for left-hand threads? This specific item is manufactured for right‑hand threads. For left‑hand versions, request the appropriate ring gauge variant from Metav IndustryLine. How should the ring gauge be stored between uses? Store the gauge clean and dry, ideally in a protective pouch or drawer, to prevent contamination and corrosion; periodic visual inspection will ensure continued reliable operation of the Metav IndustryLine gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30×1 Thread Go/No-Go Plug Gauge Right-Hand Metric ISO Fine Thread, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a compact, standards‑compliant gauge that combines precision, mechanical resilience and simple inspection workflow integration for reliable thread verification. The hardened gauge steel construction and adherence to DIN 13, 6H ensure repeatable Go/No‑Go checks on metric fine threads; order directly via Metav Werkzeuge or consult the team for specification support. M30 x 1 limit thread plug gauge — right‑hand, DIN 13 6H (Metav IndustryLine) The M30 x 1 limit thread plug gauge is a precision Go/No‑Go instrument for rapid verification of ISO metric fine threads in production and quality control environments. M30 x 1 ISO metric fine thread fit Hardened gauge steel construction Tolerance class DIN 13, 6H Compact design, 0.33 kg mass Fast, reliable checks to keep production moving A limit plug gauge provides an immediate compliance decision without complex measurement setups. The limit plug gauge in this configuration delivers a clear Go/No‑Go result for M30 x 1 threads, reducing inspection time at assembly stations and in incoming inspection. The short decision cycle improves throughput and prevents faulty parts reaching the next process step; the hardened gauge steel body resists wear so that the acceptance criteria remain stable over prolonged use. For production planners and quality engineers, that translates into fewer stoppages and predictable process behaviour. Engineered to industry tolerances for consistent conformity Compliance with DIN 13 and tolerance class 6H means the gauge matches established ISO metric fine‑thread limits used across European engineering practices. The Go‑side confirms the minimum essential dimensions, while the No‑Go‑side identifies oversize threads that could compromise assembly. This binary inspection method simplifies training for operators and offers a defensible acceptance procedure during audits. The solid construction and the specified tolerance band support objective decisions and help document traceable inspection routines. Designed for workshop practicality and longevity Weighing approximately 0.33 kg, the gauge is compact enough for bench use and straightforward handling by shopfloor personnel. The right‑hand orientation suited to standard thread forms removes ambiguity during checks. Because the item is made from hardened gauge steel, resistance to abrasion and deformation is high, extending service life and reducing the need for frequent replacement. The compact mass and form factor also make it easy to store in inspection trays or fixture drawers without risk of accidental damage. Clear specification for purchasing and inventory management The tool is supplied as a purpose‑built limit plug gauge for ISO metric fine threads, enabling straightforward cataloguing and procurement. Its compact dimensions and robust material choice make it suitable for quality departments in metalworking, assembly and maintenance operations where M30 x 1 threads are encountered. Documentation such as the thread class 6H and conformity to DIN 13 should be recorded in inspection plans to maintain consistent acceptance criteria and support supplier control activities. Contact Metav Werkzeuge today in Emmerich for specification advice and reliable supply of the M30 x 1 limit thread plug gauge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.030.4 GTIN: 4054469122885 Thread size: M30 x 1 Tolerance: DIN 13, 6H Weight: 0.33 kg Customs tariff: 90173000 Facts Mass: 0.33 kg Thread pitch: 1 mm SKU: M315.030.4 GTIN: 4054469122885 Special features Material: gauge steel, hardened Right‑hand metric ISO fine thread Conforms to DIN 13 Category: limit plug gauges / gauges FAQ What thread form and pitch does this gauge verify? The gauge verifies M30 x 1 ISO metric fine threads; the pitch is 1 mm and the tool is manufactured to the corresponding metric profile. Which tolerance class and standard apply to this plug gauge? This limit plug gauge conforms to DIN 13 with tolerance class 6H, matching common ISO metric fine‑thread acceptance criteria. Is the gauge suitable for shopfloor use and repeated checks? Yes. Constructed from hardened gauge steel, the plug gauge is intended for repeated Go/No‑Go checks in production and inspection environments. What identification references are available for inventory and traceability? Refer to article number M315.030.4 and GTIN 4054469122885 for procurement, stock keeping and traceability records. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30×1.5 Limit Thread Go Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of exact compliance with DIN standards, durable hardened gauge steel construction and compact handling for reliable thread inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for application matching. Grenzgewinde‑Lehrdorn M 30 x 1,5 mm — Limit thread plug gauge, right‑hand, Metav IndustryLine Grenzgewinde‑Lehrdorn M 30 x 1,5 mm is a limit thread plug gauge designed for verification of metric ISO fine threads in production and incoming inspection. Hardened gauge steel construction Conforms to DIN 13 tolerance 6H For M30 x 1.5 metric fine thread Compact, workshop‑friendly design Reduce rejects with repeatable thread verification A robust limit thread plug gauge like this removes uncertainty from routine checks. Manufactured from hardened gauge steel, the gauge resists wear so the go/no‑go limits remain stable over many cycles; this means fewer false rejects and more predictable quality control. Built to DIN 13 with tolerance 6H, the gauge provides an objective pass/fail decision for each threaded part, simplifying inspection protocols and reducing calibration effort in the long term. Faster inspection, clearer production decisions The compact geometry and clear go/no‑go function shorten measurement time at the workstation. Where throughput and traceability matter, a physical limit gauge speeds checks compared with time‑consuming optical setups: it delivers an immediate assessment without interpreting measurements. The lightweight construction (approx. 0.33 kg) and straightforward handling make it suitable for inline checks, enabling operators and quality staff to focus on corrective action rather than measurement ambiguity. Specified for metric ISO fine threads and workshop integration This right‑hand limit gauge is specified for M30 x 1.5 metric ISO fine threads and references DIN 13, 6H, ensuring compatibility with common engineering practice and drawing tolerances. The tool is listed with GTIN for inventory control and is ideal for both incoming inspection and in‑process gauging. As a standardised mechanical control, it complements digital QA records and reduces reliance on complex measuring machines for routine pass/fail tests. Contact Metav Werkzeuge today to confirm suitability for specific production tolerances or ask a consultant to match this Metav IndustryLine limit thread plug gauge to a measurement plan Technical data Article number: M315.030.6 GTIN: 4054469122892 Weight: 0.33 kg Material: hardened gauge steel Thread: M30 x 1.5, right‑hand Standard: DIN 13, 6H Tariff number: 90173000 Facts Thread size: M30 x 1.5 Tolerance class: 6H (DIN 13) Mass: 0.33 kg Special features Limit (go/no‑go) thread plug gauge Metric ISO fine thread verification Right‑hand thread Suitable for production and incoming inspection Category: Messstifte / Lehren FAQ What is the intended use of this limit thread plug gauge? The limit thread plug gauge is intended for pass/fail verification of M30 x 1.5 metric ISO fine threads in production and incoming inspection. How does the gauge relate to DIN standards? The gauge is manufactured to DIN 13 and tolerance 6H, providing conformity with common metric thread specifications used in mechanical engineering. What material is the gauge made from and why does it matter? Made from hardened gauge steel, the gauge offers wear resistance and stable limits over repeated use, which preserves the reliability of go/no‑go assessments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30×1.5 Thread Go Ring Right-Hand DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of DIN 13 traceability, hardened gauge steel construction and the precise M30 x 1.5 thread form for consistent inspection results. Order the gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread ring gauge M30 x 1.5 (DIN 13, 6g) — right‑hand metric thread gauge by Metav IndustryLine The Thread ring gauge M30 x 1.5 is a hardened ring gauge designed to verify right‑hand metric ISO fine threads in production and incoming inspection. DIN 13, tolerance 6g Hardened gauge steel construction For M30 x 1.5 metric fine threads Right‑hand thread verification Assured accuracy for routine thread checks The ring is manufactured to DIN 13 with tolerance class 6g, which provides a clear, industry‑recognised acceptance criterion for external metric fine threads. As a hardened ring gauge, it serves as a go/no‑go reference for thread form and basic fit, reducing uncertainty in pass/fail decisions. By using a dedicated M30 x 1.5 ring made from hardened gauge steel, inspection routines gain repeatable, quantifiable outcomes that support process control and minimise downstream rework. Robust construction that withstands shop use Constructed from hardened gauge steel, the ring offers wear resistance and dimensional stability in everyday workshop conditions. The material choice and heat treatment limit profile wear, so the gauge maintains precision over many engagement cycles. This endurance is important where frequent checks are required to validate turning, milling or thread‑rolling operations; consistent gauge performance contributes to stable production yields and fewer rejects, supporting efficient quality management. Integrates with quality workflows and traceable inventory The ring is intended for verification of metric ISO fine threads and is supplied with standard marking for straightforward traceability. Its compact form and clear designation make it easy to include in inspection kits and process control plans. The gauge’s identification (SKU M315.230.6, GTIN 4054469126227) simplifies asset tracking and inventory management, while its compatibility with standard inspection protocols supports seamless documentation in quality records and audits. Contact Metav Werkzeuge today for personalised advice on integrating this Metav IndustryLine thread ring gauge into inspection routines or to request further specification details from the technical team Technical data Article number: M315.230.6 GTIN: 4054469126227 Weight: 0.38 kg Thread size: M30 x 1.5 Standard: DIN 13, 6g Numbers Mass: 0.38 kg Diameter: 30 mm Pitch: 1.5 mm Tolerance class: 6g Special features Material: hardened gauge steel Thread direction: right‑hand Eclass: 21170214 Customs tariff number: 90173000 Category path: Messgeräte > Lehren FAQ What threads can be checked with this ring gauge? This ring gauge is designed to verify external M30 x 1.5 right‑hand metric ISO fine threads and confirms conformity to the DIN 13 6g tolerance. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel; this provides wear resistance and dimensional stability so the gauge keeps its precision during routine shop use. Which standard does the gauge conform to? The gauge conforms to DIN 13 with a tolerance class of 6g, making it suitable for common industrial acceptance checks of metric fine threads. Is the thread direction adjustable for left‑hand threads? No, the ring is manufactured for right‑hand threads only and is intended to inspect corresponding external threads in that orientation. How is the gauge identified for inventory and traceability? Identification is provided via SKU M315.230.6 and GTIN 4054469126227, which supports tracking and documentation in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M30×3.5 Thread Go Ring Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Reliable inspection of metric ISO threads is achieved by combining DIN 13 compliance with a hardened gauge steel construction and a compact 0.64 kg form factor; the result is consistent go/no‑go checking and reduced rework. Order the ring directly via Metav Werkzeuge or consult the technical team for application advice. Thread Gauge Ring M30 x 3.5 mm (Go) — Ring Gauge for Metric ISO Threads, Metav IndustryLine The Thread Gauge Ring M30 x 3.5 mm (Go) is a hardened ring gauge for rapid go/no‑go inspection of right‑hand metric ISO threads in production and quality assurance environments Hardened gauge steel construction DIN 13 tolerance class 6g compliance For right‑hand M30 x 3.5 metric threads Compact, robust 0.64 kg design Consistent conformity checks for production The Thread Gauge Ring M30 x 3.5 mm (Go) enables straightforward acceptance testing on series parts, offering a quick go/no‑go verdict that integrates directly into shop‑floor routines. The DIN 13 reference and 6g tolerance marking ensure compatibility with standard metric ISO thread specifications, supporting traceable inspection records. A hardened gauge steel body preserves the functional dimensions under repeated use, which reduces downtime for replacement and maintains measurement reliability over long production runs. Built for long service and repeatability A hardened construction and precise manufacturing minimise wear and dimensional drift, so the ring retains its acceptance characteristics over many cycles. The Go designation provides a positive check for parts that meet the maximum material envelope; in practice this shortens inspection time and lowers the risk of false rejects. Robust mechanical properties and a compact mass of 0.64 kg contribute to stable handling and repeatable results across batch inspections, improving throughput without compromising quality. Efficient integration into quality workflows Designed as a pragmatic metrology tool, the ring gauge supports organised quality control by producing immediate, unambiguous outcomes that feed process decisions. Mounting the gauge as part of a control station or portable inspection kit simplifies in‑process checks and helps to prevent non‑conforming threads reaching downstream assembly. Clear standard reference (DIN 13) and concise tolerance labelling assist documentation and quality audits, promoting efficient production management and fewer corrective actions. For DIN‑compliant thread inspection and delivery coordination, contact Metav Werkzeuge for ordering and technical consultation. Technical Data SKU: M315.130 GTIN: 4054469124544 Weight: 0.64 kg Material: gauge steel, hardened Facts Thread diameter: 30 mm Pitch: 3.5 mm Tariff number: 90173000 Tolerance class: 6g Special features Standard: DIN 13 Right‑hand thread 'Go' ring (acceptance gauge) Categories: Gauges; Gauge pins FAQ What is the primary purpose of this ring gauge? The ring gauge is intended for rapid go/no‑go inspection of metric ISO threads; the Thread Gauge Ring M30 x 3.5 mm (Go) from Metav IndustryLine confirms whether manufactured threads meet the specified acceptance envelope. Which standard and tolerance class does the gauge conform to? Compliance is with DIN 13 and the ring is specified to tolerance class 6g, providing a standardised basis for acceptance checks on metric ISO threads. What material is the gauge made from and how durable is it? Manufactured from hardened gauge steel, the gauge is designed for wear resistance and dimensional stability to ensure durable, repeatable inspections over many cycles. Can this gauge be used for left‑hand threads or multiple pitch sizes? This particular unit is produced for right‑hand threads with a fixed size of M30 x 3.5 mm; a different gauge is required for left‑hand threads or other pitches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M32 x 1.5 Thread Go Gauge For Metric ISO Fine Thread, Right Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 conformity, hardened gauge steel and a compact, repeatable go/no-go check to keep thread production and inspection running smoothly; order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge M32 x 1.5 mm (go) – DIN 13, 6g, Hardened Gauge Steel by Metav IndustryLine The Thread Ring Gauge M32 x 1.5 mm (go) is a right-hand metric ISO fine-thread go gauge designed for fast verification of production and inspection threads Go ring gauge for M32 x 1.5 mm Conforms to DIN 13, tolerance 6g Hardened gauge steel for long life Right-hand metric ISO fine thread Accuracy that keeps production predictable The ring gauge is designed for straightforward, repeatable go/no-go control at the bench or on the production line. Conformance with DIN 13 and the 6g tolerance means that the gauge checks the functional acceptance of M32 x 1.5 mm metric fine threads against the familiar industrial reference; this simplifies decisions about part acceptance and reduces ambiguity during batch inspections. Using a purpose-made go gauge streamlines throughput because each check delivers an unequivocal result — pass or fail — without additional measurement conversion. Durable build for sustained uptime Manufactured from hardened gauge steel, this thread gauge resists wear and maintains dimensional stability under repeated use, which preserves the original calibration over many inspection cycles. The compact mass of 0.65 kg provides a robust feel without excessive bulk, helping operators to seat the gauge cleanly. The right-hand thread form and metric ISO specification make the device suitable for series production where consistent contact geometry and surface finish are required to avoid false rejections. Rapid inspection that reduces rework As a dedicated go gauge, the device performs immediate conformity checks that reduce downstream rework: a correct fit confirms that mating parts will assemble without interference, while a tight or non-fitting result flags the item for corrective action. The simple functional nature of the gauge removes interpretation errors common with comparative tools and enables quicker decision-making in the quality loop. When traceability is needed, the rigid construction supports repeatable outcomes that simplify process documentation. Practical integration into workshop routines The gauge suits both shop-floor checks and incoming inspection of threaded components produced to metric ISO fine-thread standards. Its form factor and the clear DIN reference encourage direct adoption in standard operating procedures and make it straightforward to include in inspection plans or fixture checks. Metav IndustryLine’s approach to accessible precision means reliable measurement tools are available from a single, trusted supply point for industrial users and precision workshops alike. For assured thread inspection using Metav IndustryLine’s hardened gauges, contact Metav Werkzeuge in Emmerich for ordering or technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.132.6 SKU: M315.132.6 GTIN: 4054469124599 Weight: 0.65 kg Manufacturer: Metav IndustryLine Facts Thread size: M32 x 1.5 mm Tolerance: 6g Handing: right-hand Tariff code: 90173000 Special features Material: hardened gauge steel Standard: DIN 13 Application: metric ISO fine thread inspection Type: go (gut) ring gauge FAQ What thread size does this gauge check? The Thread Ring Gauge M32 x 1.5 mm (go) checks right-hand metric ISO fine threads with a nominal size of M32 and a 1.5 mm pitch. Is this a go or no-go gauge? This device is a go (gut) ring gauge intended for functional acceptance checks; a correct fit indicates the thread meets the specified tolerance. What standard does the gauge follow? The ring gauge is made to DIN 13 and set to the 6g tolerance band for metric ISO fine threads. What material is the gauge made from? The gauge is manufactured from hardened gauge steel for improved wear resistance and dimensional stability during repeated inspections. Can this gauge be used on the shop floor for production checks? Yes, the Thread Ring Gauge M32 x 1.5 mm (go) is suitable for rapid shop-floor and incoming inspection checks where definitive go/no-go results are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M32x1.5 Go/No-Go Thread Plug For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The product data contain contradictory information and cannot be processed. The item is simultaneously indicated as both good and scrap, which creates confusion in determining its actual status. Additionally, some numerical fields show inconsistencies, such as mismatched values or entries that do not align with expected formats. These issues prevent accurate processing and hinder the generation of a reliable product description. Please correct the dataset by removing or reconciling the conflicting quality indicators and resolving the numeric discrepancies. Once the dataset has been updated and verified for accuracy, resubmit it so a full and detailed product description can be generated successfully.
M32x1.5 Thread Ring Gauge Right Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise conformity checking, robust hardened gauge steel construction and the DIN‑specified tolerance for reliable in‑process inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. Thread ring gauge M32 x 1.5 mm — right‑hand, DIN 13 (Metav IndustryLine) A thread ring gauge M32 x 1.5 mm designed for fast verification of metric ISO fine threads in production and quality control environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Right‑hand metric ISO fine thread Reliable thread verification that prevents costly rejects The M32 x 1.5 mm ring gauge serves as a straightforward, durable means of checking thread conformity on finished parts. Built to DIN 13 with a 6g tolerance, the instrument identifies out‑of‑tolerance pitch diameters and thread form deviations quickly, so inspection gates remain unambiguous. As a reject (no‑go) ring, it is intended to detect oversize or non‑conforming threads before components proceed to assembly, reducing rework and downstream failures. The result is a measurable improvement in first‑pass yield and a clearer quality record for audit purposes. Durable construction for long service life and low maintenance Manufactured from hardened gauge steel, the ring gauge offers high wear resistance and stability under continuous use. The heat‑treated material preserves the effective diameter and flank form over many inspection cycles, which reduces the need for frequent replacement and helps maintain consistent measurement quality on the shop floor. At 0.43 kg the device is compact enough for rapid handling while remaining robust enough to withstand routine industrial use. Standards and traceability to support quality systems Compliance with DIN 13 and the stated tolerance class 6g provides a traceable baseline for documented quality processes. The product is identified as M315.232.6 and carries GTIN 4054469126258 for inventory and traceability purposes. Using standardized gauges facilitates coherent inspection criteria across suppliers and production lines, supporting ISO‑based quality systems and easing cross‑functional communication between production and quality assurance teams. Practical integration into inspection routines The ring gauge is optimised for straightforward handling in repetitive checks: the right‑hand geometry matches standard metric thread directions and the compact form supports rapid manual verification. Its single‑purpose design keeps inspection steps simple and repeatable, helping operators make fast accept/reject decisions and maintain throughput. Combined with Metav’s technical documentation and stock in Emmerich, the gauge is intended to be a pragmatic addition to existing inspection benches or incoming goods checks. Contact Metav Werkzeuge for product availability and application guidance; specialists are available to advise on compatibility with existing inspection plans and delivery from our Emmerich warehouse Technical data Article number: M315.232.6 GTIN: 4054469126258 Designation: Thread ring gauge M32 x 1.5 mm (right‑hand) Weight: 0.43 kg Material: hardened gauge steel Facts Thread size: M32 × 1.5 Tolerance: 6g Standard: DIN 13 Tariff number: 90173000 ECLASS: 21170214 Special features Intended use: inspection of metric ISO fine threads Type: reject (no‑go) ring Thread direction: right‑hand Category: gauges / ring gauges FAQ How is this ring gauge used in a production environment? The ring gauge M32 x 1.5 mm is used as a direct inspection tool to verify metric ISO fine threads; as a reject (no‑go) ring it indicates oversize or non‑conforming threads during incoming or in‑process checks. Which standards and tolerance class apply to this gauge? This ring gauge is manufactured to DIN 13 with tolerance class 6g, providing a standardised acceptance criterion for M32 × 1.5 threads. What material is the gauge made from and how does that affect service life? Made from hardened gauge steel, the gauge offers enhanced wear resistance and dimensional stability, extending service life under regular inspection cycles. Can this gauge check left‑hand threads? No — this particular ring gauge is a right‑hand thread instrument; left‑hand threads require a corresponding left‑hand gauge. How is the product identified for inventory and traceability? The item is listed under article number M315.232.6 and GTIN 4054469126258, which supports traceability and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M32x2 Limit Go/No-Go Thread Plug For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the M32 x 2 thread form, hardened gauge steel construction and conformity to DIN 13, 6H for fast, repeatable acceptance testing on metric fine threads; order directly via Metav Werkzeuge or contact our consultants for specification advice. Go/No-Go thread plug M32 x 2 (ISO metric, right-hand) — hardened gauge steel, DIN 13, 6H (Metav IndustryLine) A Go/No-Go thread plug M32 x 2 designed for quick inspection of ISO metric fine threads in production and quality control, classified as a limit thread gauge plug for right-hand threads DIN 13 tolerance 6H Hardened gauge steel construction Right-hand M32 x 2 metric thread Compact weight 0.6 kg Faster acceptance checks with standardised limits The go/no-go principle embodied in this limit thread plug reduces uncertainty in routine inspections: the designated “go” end verifies that the internal thread meets the minimum material and form requirements, while the “no-go” end flags oversize or incorrect forms. By applying a standardised acceptance routine, production lines benefit from reduced rework and fewer false rejects. The hardened gauge steel body maintains its profile under repeated handling, ensuring that measurement integrity is preserved across long inspection runs and supporting consistent process control. Durable construction that lowers maintenance needs Manufactured from hardened gauge steel, the gauge offers resistance to wear and maintains thread geometry over many cycles. The robust material choice minimises dimensional drift, which translates directly into lower recalibration frequency and reduced downtime for quality teams. The tool’s modest 0.6 kg mass makes it easy to handle during rapid checks while still providing sufficient mass to resist accidental deformation, helping engineering departments preserve tight production tolerances. Conformity and documentation for quality workflows Supplied to match DIN 13, 6H for ISO metric fine threads, the plug integrates naturally into documented inspection plans and audit trails. Its clear reference to recognised standards simplifies acceptance criteria in inspection reports and quality control procedures. The compact form factor supports quick identification and mounting within gauge holders or inspection fixtures, allowing traceable results to be logged without complex fixturing — a pragmatic choice for shops that need dependable evidence of conformance without lengthy setup. Practical benefits for workshop and production use As a limit gauge for an M32 x 2 thread, the plug streamlines routine checks on mating parts, threaded components and assemblies. The right-hand thread configuration matches common production threads, reducing the need for multiple specialised tools. For maintenance engineers and quality inspectors, the gauge offers a direct physical pass/fail decision that speeds throughput and supports lean inspection strategies, while its familiar form factor keeps operator training straightforward. Contact Metav Werkzeuge for expert guidance on integrating Metav IndustryLine thread gauges into inspection workflows and to arrange supply for immediate process improvement Technical data Article number: M315.032.7 GTIN: 4054469122939 Material: Gauge steel, hardened Thread size: M32 x 2 Norm: DIN 13, 6H Weight: 0.6 kg Facts Thread pitch: 2 mm Right‑hand thread configuration Tariff number: 90173000 Category: Gauges / Limit thread plug Special features Go/no-go acceptance principle Suitable for ISO metric fine threads Compact, hand‑held form for production checks Designed for repeated use with low wear FAQ How is the gauge intended to be used in production inspections? The limit thread plug is used as a go/no-go acceptance tool: the “go” end confirms the minimum acceptable thread form, the “no-go” end detects oversize or non-conforming threads, enabling quick pass/fail decisions during incoming or in-process inspection. Does the plug conform to recognised standards for metric threads? Yes, the plug is manufactured to DIN 13, 6H, ensuring compatibility with ISO metric fine-thread specifications for reliable acceptance testing. What materials and durability can be expected from this gauge? Constructed from hardened gauge steel, the gauge resists wear and preserves thread geometry over many inspection cycles, reducing the need for frequent maintenance or replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M32x2 Thread Go Gauge For Metric ISO Fine Thread Right-Hand DIN 13, 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise thread control, durable hardened gauge steel construction and conformity to DIN 13 (6g) for dependable inspection results; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M32 x 2 mm — Go gauge, DIN 13 (6g), Metav IndustryLine Thread ring gauge M32 x 2 mm for rapid verification of metric ISO fine threads in production and quality inspection across metalworking and assembly processes Hardened gauge steel construction DIN 13 tolerance class 6g Right-hand M32 x 2 mm go gauge Compact mass 0.65 kg for easy handling Reliable thread verification for production control A purpose-designed go thread ring ensures fast, unambiguous verification of internal thread quality during incoming inspection and inline production checks. The M32 x 2 mm sizing and DIN 13, 6g tolerance class permit clear pass/fail decisions: a part that accepts the go gauge is within the specified maximum material condition. This direct acceptance test reduces rework and scrap by preventing out-of-spec assemblies from progressing down the line, supporting efficient quality control procedures and traceable production records. Durable construction for repeatable measurements Manufactured from hardened gauge steel, the ring offers robust wear resistance and geometric stability, delivering repeatable results over many inspection cycles. The right-hand orientation matches standard ISO metric threads; the compact mass of 0.65 kg provides a balance between handling comfort and sufficient inertia for smooth gauging. The simple, purely mechanical principle minimises potential failure modes and avoids dependence on batteries or electronics, making the gauge suitable for harsh shop-floor conditions where reliability and low maintenance are essential. Clear identification and workshop integration Catalogue identifiers and marking support inventory control and measurement traceability. The item is listed under gauges and precision inspection equipment for straightforward procurement and storage. The compact design enables rapid use at benches or inspection stations, while the rigid construction helps maintain conformity over extended service life. For documented workflows, the ring may be recorded alongside other inspection tools to form a consistent master set used in batch acceptance and supplier verification routines. For assured compliance with DIN 13 and reliable inspection results, request the Metav IndustryLine M32 go ring from Metav Werkzeuge — contact our Emmerich team at info@metav-werkzeuge.com or +49 2822 7131930 for specification matching and delivery options. Technical Data Article number: M315.132.7 GTIN: 4054469124605 Label: Gewinde-Lehrring M32 x 2 mm gut DIN 13, f. metr. ISO-Feingewinde, rechts Facts Thread: M32 x 2 Weight: 0.65 kg Tariff number: 90173000 Special features Material: Hardened gauge steel Standard: DIN 13, 6g Type: Go (gut) thread ring Orientation: Right-hand Category: Gauges / Lehren FAQ What thread form and tolerance does this gauge check? The Metav IndustryLine go thread ring checks metric ISO fine threads of size M32 x 2 mm to DIN 13, tolerance class 6g. Is this a go or no-go ring? This is a go ring gauge; it verifies that internal threads meet the maximum material condition for acceptance. What material is the ring made from and how does that affect usage? The ring is made of hardened gauge steel, which provides wear resistance and dimensional stability for repeated shop-floor use. Can the gauge be used for production sampling or final inspection? Yes, the ring is suitable for both inline production checks and final inspection to confirm conformance with specified thread tolerances. How is the item identified for inventory and traceability? Identification is possible via article number M315.132.7 and GTIN 4054469124605 for catalogue and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M32×2 Thread Ring Gauge, Go, DIN 13 6g, Right-Hand, Hardened Gauge Steel - Metav IndustryLine
The hardened gauge steel and DIN 13 tolerance ensure reliable rejection of out-of-spec threads while keeping inspection fast and repeatable; combine precision, durability and simple shop‑floor control. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M32 x 2 mm — No‑go ring, hardened gauge steel (Metav IndustryLine) A thread ring gauge M32 x 2 mm (no‑go) for right‑hand metric ISO fine threads, made for quick go/no‑go checks and control of batch conformity Ring gauge for M32 x 2 fine threads Hardened gauge steel for wear resistance Conforms to DIN 13, tolerance 6g Right‑hand no‑go check, shop‑floor use Assured conformity for ISO fine threads The M32 x 2 no‑go ring is engineered to quicken acceptance decisions by verifying that threads do not exceed the maximum material condition defined in DIN 13 with tolerance class 6g. As a dedicated no‑go tool, the ring prevents oversized or out‑of‑tolerance threads from passing inspection, reducing downstream rework and rejects. Using a purpose‑made ring gauge shortens measurement time compared with full coordinate checks and provides a straightforward binary result for operators: pass or reject. This clear outcome supports efficient quality control and traceable production decisions. Durable construction for repeated shop‑floor use Manufactured from hardened gauge steel, the ring resists wear and maintains its measurement edge through repeated contact with mating threads. The robust construction and compact mass (approximately 0.43 kg) make it suitable for routine use at incoming inspection, assembly stations or final control. The right‑hand geometry is specified for standard metric ISO fine threads and the ring’s finish helps prevent thread damage during checking. Long service life and stable dimensions contribute to predictable tooling replacement cycles and lower total cost of ownership in busy production environments. Integrates simply into inspection routines and documentation The ring is supplied as a straightforward go/no‑go control instrument for shop floors that require fast throughput and consistent decisions. The compact form factor facilitates storage in inspection kits or gauge sets and supports repeatable handling by trained staff. Identification with GTIN and SKU aids inventory management and replacement ordering, while the clear DIN reference streamlines documentation in quality plans and inspection records. For firms standardising their gauges, the device from Metav IndustryLine fits directly into established metrology processes and supports regulatory and customer requirements for documented conformity. For reliable no‑go thread control and consistent batch inspection, contact Metav Werkzeuge in Emmerich to discuss the Metav IndustryLine ring gauge and ensure compliant inspection tooling for the workshop. Technical Data Article number: M315.232.7 GTIN: 4054469126265 SKU: M315.232.7 Facts Thread size: M32 x 2 mm Standard: DIN 13, tolerance 6g Weight: 0.43 kg Direction: right‑hand thread Material: hardened gauge steel Special features No‑go (Ausschuss) ring for go/no‑go inspection Category: Gauges / Thread ring Tariff code: 90173000 FAQ What is the purpose of this ring gauge? The ring gauge checks that an M32 x 2 thread is not oversized; the no‑go configuration identifies unacceptable threads immediately. Is this a go or a no‑go gauge? This particular item is the no‑go ring; it is intended to reject threads that exceed the maximum allowable limit. Which standard does the gauge comply with? The gauge is manufactured to DIN 13 with tolerance class 6g, suitable for metric ISO fine threads. What material is the ring made from? The ring is made of hardened gauge steel to provide wear resistance and dimensional stability under repeated use. Can this gauge be used on left‑hand threads? No; this ring is specified for right‑hand threads only and must not be used on left‑hand thread forms. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com