Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M34×1 Thread Go Ring Gauge Right-Hand Metric ISO Fine Pitch DIN 13, Hardened Gauge Steel, 6g - Metav IndustryLine
Take advantage of a hardened gauge-steel design and the DIN 13 / 6g tolerance to ensure repeatable thread inspection for metric fine threads; order the ring gauge via Metav Werkzeuge or request tailored advice from our consultants. Thread ring gauge M34 × 1 mm (DIN 13, 6g) – Metav IndustryLine The Thread ring gauge M34 × 1 mm (DIN 13, 6g) is a hardened gauge steel ring for verifying metric ISO fine threads in right-hand form, designed for production and incoming‑inspection use. Hardened gauge steel for long service life DIN 13 tolerance class 6g Metric ISO fine thread M34 × 1 mm, right-hand Consistent inspection accuracy for repeatable acceptance checks The ring is manufactured to DIN 13 with tolerance 6g, which provides a clear, standardised acceptance criterion for metric ISO fine threads. This specification reduces ambiguity during go/no‑go decisions and supports reliable quality control documentation. Made from gauge steel, hardened, the component resists wear and maintains the calibrated profile over repeated contact cycles; this means fewer replacements and stable inspection limits in routine use. The concise geometry of the M34 × 1 mm profile simplifies fixture design and supports rapid tactile checks on threaded parts. Faster throughput and fewer rejects in production control A dedicated thread ring accelerates inspection compared with optical or complex measuring routines: the physical check confirms fit instantly, improving process throughput and lowering rework rates. The compact, purpose‑made design of this metric thread gauge assists in quick part sampling at the line or at the inspection bench, enabling immediate decisions that protect downstream assembly operations. Clear conformity to international standards streamlines communication with suppliers and audit records, supporting efficiency gains across manufacturing and quality assurance workflows. Robust construction and practical lab/plant use Constructed from hardened gauge steel, the gauge combines durability with dimensional stability, keeping inspection uncertainty low under normal workshop conditions. The modest mass and familiar ring format make handling straightforward and reduce operator fatigue during frequent checks. Labelling with GTIN and article number supports inventory tracking and process traceability. As part of a calibrated toolkit, the gauge offers a pragmatic balance of longevity and ease of use that suits both production facilities and quality laboratories seeking consistent thread verification. Contact Metav Werkzeuge for application guidance and to integrate the M34 thread ring gauge into inspection routines — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M315.234.4 GTIN: 4054469126326 Category: Lehren ECLASS: 21170214 Tariff number: 90173000 Measurements Thread size: M34 × 1 mm Tolerance class: 6g Weight: 0.5 kg Special features Material: Gauge steel, hardened Standard: DIN 13 Right‑hand metric ISO fine thread Suitable for production and incoming inspection FAQ What tolerance class does this gauge represent? The gauge is made to DIN 13 with tolerance class 6g, providing the standard acceptance criterion for metric ISO fine threads. Is the ring suitable for M34 × 1 mm metric fine threads? Yes, the ring is specifically for M34 × 1 mm metric ISO fine threads in a right‑hand form and is intended for routine inspection tasks. What material is used for the ring gauge? The ring is manufactured from gauge steel, hardened, chosen to ensure wear resistance and dimensional stability during repeated use. Can this gauge be used on the production line for quick checks? The design supports rapid tactile checks at the line or inspection bench, enabling fast go/no‑go decisions and helping to reduce rework. Which article number and GTIN identify this product? Article number: M315.234.4; GTIN: 4054469126326 — these identifiers assist with procurement and traceability Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34×1.5 Thread Ring Gauge Right-Hand ISO Fine Pitch DIN 13, Grade 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a measurement device that combines DIN 13 conformity, hardened gauge steel construction and a clearly defined reject function to secure thread quality on metric fine threads; order the thread ring gauge directly via Metav Werkzeuge or ask the consultants for tailored advice. Thread ring gauge M34 x 1.5 mm (No-go) — hardened gauge steel, DIN 13 The thread ring gauge M34 x 1.5 mm is a right‑hand, no‑go inspection ring for metric ISO fine threads, designed for inline production checks and laboratory control. Thread ring gauge M34 x 1.5 mm Hardened gauge steel for durability DIN 13 tolerance class 6g Assured conformity for metric fine threads A no‑go ring is used where a clear reject criterion is required: the thread ring gauge M34 x 1.5 mm verifies that external threads do not exceed the permitted maximum material condition for a metric ISO fine thread. Manufactured to DIN 13 with tolerance class 6g, this ring provides an objective, repeatable pass/fail result that simplifies acceptance decisions on the shop floor. The clear mechanical function of a no‑go element removes ambiguity from visual checks and subjective assessments, enabling consistent quality control across production shifts. Robust construction for continuous use Made from hardened gauge steel, the ring is engineered for high wear resistance and long service life in industrial environments. The chosen material ensures dimensional stability under repeated use, reducing the frequency of replacement and supporting predictable maintenance cycles. The component’s compact mass (0.5 kg) makes handling straightforward during inspection, while the robust finish maintains thread geometry accuracy even after extended operational periods. These attributes lead to lower total cost of ownership and fewer process interruptions. Integration into inspection routines and traceability Designed for routine inspection and incoming part control, this ring gauge fits into established inspection jigs and manual check stations. Compliance with DIN 13 means compatibility with industry standards and simplified documentation for audits. The product supports systematic quality workflows by providing a binary measurement outcome that can be logged and traced alongside production batches. Clear identification via SKU and GTIN facilitates inventory management and reordering in standard procurement systems. For assured thread control with Metav IndustryLine’s hardened ring gauge, contact Metav Werkzeuge in Emmerich for ordering and technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.234.6 GTIN: 4054469126333 SKU: M315.234.6 Facts Thread designation: M34 x 1.5 mm Thread hand: Right‑hand Tolerance class: 6g Weight: 0.5 kg Special features Material: Hardened gauge steel Standard: DIN 13 Function: No‑go (reject) ring for metric ISO fine thread inspection FAQ What does "no‑go" mean for this ring gauge? A no‑go ring verifies that an external thread exceeds the maximum permissible limits; the thread ring gauge M34 x 1.5 mm is intended to identify rejects rather than confirming acceptable parts. Which standard governs this gauge? The ring is produced to DIN 13 and uses the 6g tolerance class applicable to metric ISO fine threads. Is the ring suitable for left‑hand threads? This specific gauge is for right‑hand threads; left‑hand thread gauges must be ordered in the corresponding hand version. What material is the gauge made from and why does it matter? Constructed from hardened gauge steel, the ring resists wear and maintains dimensional stability, which is essential for repeatable inspection results. Can this gauge be used in production inspection jigs? Yes. The design and standard conformity make it suitable for manual inspection stations and integration into production quality routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M34×3 Thread Ring Gauge, Go, Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of precise, standardised inspection with a hardened Go thread ring gauge built to DIN 13 (6g) and sized for M34 x 3 mm threads; this robust gauge combines repeatable pass/fail verification with durable gauge‑steel construction for reliable shop‑floor use. Order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M34 x 3 mm (Go) — Go thread ring gauge, DIN 13, hardened (Metav IndustryLine) The Thread ring gauge M34 x 3 mm (Go) is a hand‑held checking tool for quick acceptance tests of metric ISO fine threads, suitable for production inspection and incoming goods control. DIN 13 tolerance class 6g Hardened gauge steel construction For M34 x 3 mm metric ISO fine thread Mass 0.68 kg for compact handling Rapid, standards‑based pass/fail inspection for production A hardened Go gauge to DIN 13 with tolerance class 6g enables immediate assessment of threaded parts without time‑consuming measurements. Where traceable decisions are required, the gauge provides a clear pass or fail: if the part screws into the ring without binding, the thread form and pitch fall within the specified limits. This method reduces cycle time on the inspection bench and prevents rework further down the production chain by catching deviations early. The standardised verification also supports consistent quality documentation across shifts. Durable materials for long service life and low maintenance Manufactured from hardened gauge steel, the ring resists wear from repeated use and maintains dimensional stability in typical workshop environments. Hardening improves resistance to abrasion and preserves the thread profile that is critical for repeatable checks. As a result, inspection routines are more reliable and calibration intervals can be planned with confidence. The solid construction also minimises the risk of false rejects caused by gauge deformation, which contributes directly to process efficiency and reduced scrap rates. Practical handling and workplace integration With a compact mass of 0.68 kg, the ring is easy to handle on the inspection table and can be used efficiently in manual checks or as a quick verification tool at the machine. The M34 x 3 mm size covers fine‑thread applications common in hydraulic fittings, precision assemblies and mechanical components. Because the check is tactile and immediate, operators can make fast decisions and maintain production flow; documented results can then be recorded in quality control systems for traceability. Procurement, identification and workshop benefits The gauge is supplied as a single, ready‑to‑use inspection tool identified by its SKU and GTIN for straightforward inventory control. Using a dedicated Go ring streamlines inspection protocols and reduces measurement ambiguity compared with ad hoc gauges. For workshops and suppliers seeking to harmonise inspection practices, integrating this ring gauge supports repeatable acceptance criteria and harmonised training for inspection staff. Select Metav IndustryLine's hardened Go thread ring gauge for consistent thread checks and contact Metav Werkzeuge in Emmerich for tailored procurement guidance or technical clarification. Technical Data Article number: M315.134.8 GTIN: 4054469124698 Mass: 0.68 kg Material: hardened gauge steel Standard: DIN 13, 6g Size: M34 x 3 Customs tariff number: 90173000 Facts Tolerance class: 6g Type: Go thread ring gauge Application: metric ISO fine threads Weight: 0.68 kg Special features Solid, hardened construction Hand inspection use for pass/fail checks Suitable for production and incoming inspection FAQ What is the purpose of this Go ring gauge? The ring gauge is used for rapid pass/fail verification of metric ISO fine threads; the Go gauge confirms whether an M34 x 3 threaded part falls within the DIN 13, 6g tolerance. How does the hardened material affect longevity? Hardened gauge steel keeps the thread profile stable under repeated use, so the gauge maintains accuracy and requires less frequent replacement. Is this gauge suitable for production line checks? Yes, the compact mass and robust construction make the gauge practical for routine production and incoming goods inspections; the device is intended for hand‑held verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35 x 1mm Go/No-Go Thread Gauge For Metric ISO Fine Threads, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Combining DIN 13 conformity, hardened gauge steel and the precise M35 × 1 mm thread form delivers a dependable tool for fast pass/fail inspections on production lines; secure supply directly from Metav Werkzeuge or consult the team for application advice. Limit thread mandrel M35 × 1 mm — metric ISO fine thread plug gauge, right‑hand (Metav IndustryLine) The limit thread mandrel M35 × 1 mm is a right‑hand plug gauge designed for quick go/no‑go verification of metric ISO fine threads in workshop and production environments. DIN 13 compliance, tolerance 6H Hardened gauge steel construction Right‑hand metric M35 × 1 thread Precision inspection for production control Ensure conformity with an industry standard reference This gauging mandrel is manufactured to DIN 13 with tolerance class 6H, a recognised benchmark for metric thread acceptance. By referencing a standardised tolerance, the tool removes ambiguity from routine checks and supports consistent quality decisions on the shop floor. The defined M35 × 1 mm geometry enables immediate assessment of thread form and pitch, reducing machine downtime because threads that pass with the mandrel meet the prescribed dimensional limits without additional measurement. For users less familiar with thread standards, 6H denotes the internal thread tolerance grade commonly used for general engineering and ensures compatibility with mating external threads manufactured to the same norm. Durable construction for repeatable results in production Made from hardened gauge steel, the mandrel resists wear from repeated engagement and maintains its reference condition across numerous cycles. Hardening increases surface life and stabilises the gauge geometry, so inspection results remain reproducible over time. The robust material choice also minimises risk of false rejection due to gauge deformation, a key concern when many operators perform quick checks. In practice, this means fewer rework operations and a lower rate of scrap, while traceable materials and finish support a predictable service life. The compact, single‑piece design contributes to handling ease and reduces potential error sources during rapid assembly‑line checks. Fast, unambiguous go/no‑go checks that speed up quality control Limit gauges are intended for binary decisions: either the thread meets the limit or it does not. That simplicity translates into rapid throughput for incoming inspection, in‑process control and final checks. The right‑hand M35 × 1 mm form is suited to applications where fine metric threads are specified; using this mandrel reduces measurement interpretation time and simplifies operator training. The clear pass/fail principle helps maintain production momentum and gives a reliable first‑line defence against out‑of‑tolerance parts. For traceability and stockkeeping, the piece carries a catalogued article number and GTIN, supporting easy integration into quality documentation and tool inventories. Contact Metav Werkzeuge in Emmerich for tailored advice and to arrange supply of the Metav IndustryLine limit thread mandrel M35 × 1 mm Technical data Article number: M315.035.4 GTIN: 4054469123035 Thread size: M35 × 1 mm Standard: DIN 13, 6H Material: gauge steel, hardened Weight: 0.53 kg Tariff number: 90173000 Facts Nominal diameter: 35 mm Thread pitch: 1 mm Tolerance class: 6H Mass: 0.53 kg Special features Right‑hand metric ISO fine thread Limit (go/no‑go) gauging function Hardened gauge steel construction Category: Gauges — limit thread mandrel FAQ What standard does the mandrel conform to? The mandrel is manufactured to DIN 13 with tolerance class 6H, which defines the acceptable limits for metric ISO threads. Is this tool suitable for verifying M35 fine threads? Yes; the limit mandrel is specifically dimensioned for M35 × 1 mm metric fine threads and is intended for rapid go/no‑go verification. What material is used and what advantage does it offer? Constructed from hardened gauge steel, the mandrel offers enhanced wear resistance and dimensional stability for repeated shop‑floor use. How is the inspection result interpreted with this gauge? The tool provides a binary outcome: if the mandrel enters the thread without forcing, the thread meets the specified limit; a jam or refusal indicates non‑conformity. Can the mandrel be used for documentation and stock control? Yes; the item is catalogued with article number M315.035.4 and GTIN 4054469123035 to support traceability and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x1 Go Thread Ring Gauge Metric ISO Fine Pitch Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of strict tolerance control, robust hardened construction and straightforward go/no‑go inspection to ensure thread conformity in series production. Order the M315.135.4 thread plug gauge directly via Metav Werkzeuge or consult our technicians for application advice. Thread plug gauge M35 x 1 mm (go) — Metav IndustryLine, DIN 13 6g, hardened gauge steel The thread plug gauge M35 x 1 mm (go) is a compact verification gauge for right‑hand metric ISO fine threads, intended for production and incoming inspection to confirm conformity with established thread standards. M35 x 1 mm go thread plug gauge DIN 13 tolerance class 6g Hardened gauge steel construction Suitable for production and incoming inspection High‑precision verification that matches standards This go‑only thread plug is manufactured to the DIN 13 specification and tolerance class 6g, providing a clear and objective test for whether a thread meets the required fit. Used as a quick go/no‑go check, the gauge verifies the functional limits of mating parts without complex measurement setups, which accelerates decision‑making in quality control. The adherence to recognised standards gives a verifiable basis for acceptance or rejection, fostering reproducible inspection results in serial production. Durable design for workshop and shop‑floor use Constructed from hardened gauge steel, the gauge resists wear and maintains dimensional stability during repeated use, reducing the need for frequent replacements. As a tool for routine checks, it withstands the mechanical demands of a busy inspection station and retains accuracy over time, thereby lowering lifetime costs. The right‑hand, metric ISO fine‑thread format is ideal for components specified as M35 x 1 mm, permitting fast interchangeability in environments that process fine threads regularly. Faster inspections, fewer production interruptions Integrating a simple go gauge into inspection procedures streamlines throughput: each check is immediate and unambiguous, preventing downstream assembly faults and rework. The compact format and clear pass/fail function support lean inspection workflows and help maintain steady production flow. Confidence in thread conformity increases operational reliability and contributes to consistent product quality, backed by Metav IndustryLine’s practical supply chain and technical competence. For reliable thread verification choose Metav IndustryLine gauges—contact Metav Werkzeuge in Emmerich for application guidance and prompt delivery tailored to production needs. Technical Data Article number: M315.135.4 GTIN: 4054469124704 Weight: 0.39 kg Thread size: M35 x 1 mm Standard: DIN 13, 6g Tariff number: 90173000 Facts Type: Go thread plug gauge Handedness: Right‑hand thread Material: Hardened gauge steel Application: Metric ISO fine threads Category: Gauges / Thread gauges Special features Rapid go/no‑go functional test Robust construction for production use Designed for incoming inspection and shop‑floor checks Compact format suitable for inspection stations FAQ What does the "go" designation mean for this gauge? The "go" designation indicates that the gauge is a functional acceptance tool; if the thread plug gauge M35 x 1 mm (go) enters the thread without binding, the thread meets the minimum functional requirements specified by DIN 13 6g Can this gauge be used for both inspection and production setup? Yes, the hardened construction and clear pass/fail function make this Metav IndustryLine thread gauge suitable for routine incoming inspection and for quick checks during production setup. Is the gauge suitable for metric ISO fine threads only? The gauge is specified for M35 x 1 mm metric ISO fine threads (right‑hand) and is intended to verify conformity to that thread form and tolerance class. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x1 Thread Ring Gauge Metric ISO Fine Thread Right Hand DIN 13, 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge for repeatable verification of M35 × 1 mm metric ISO fine threads, manufactured to DIN 13 with tolerance 6g for consistent acceptance decisions; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M35 × 1 mm — hardened gauge steel, DIN 13, 6g — Metav IndustryLine The Thread ring gauge M35 × 1 mm is a hardened ring gauge for fast, reliable inspection of metric ISO fine threads (right‑hand), ideal for workshop and production quality control Hardened gauge steel construction Complies with DIN 13 tolerance 6g For metric ISO fine thread M35 × 1 right‑hand Robust ring for inspection and workshop use Consistent thread verification for production control A hardened thread ring gauge provides a direct and economical method to verify threaded parts on the shop floor. The M35 × 1 mm size checks conformity to metric ISO fine‑thread form, while the DIN 13 specification with 6g tolerance defines the acceptance limits used in industrial practice. Using a gauge ring reduces subjective judgement: a part that passes the gauge meets the defined tolerance band, a part that does not pass should be rejected or reworked. This measurable decision process supports faster in‑line sampling and lowers the risk of assembly failures further down the value chain. Built for repeatability and low maintenance Manufactured from hardened gauge steel, the ring resists wear and preserves the measuring profile over extended use, keeping maintenance intervals predictable. The compact, solid design and the modest mass of 0.54 kg make the gauge easy to handle on the inspection bench while providing the stiffness needed for repeatable checks. As a go/no‑go style inspection tool, the ring eliminates interpretation errors associated with visual thread assessment and enables technicians to maintain throughput without sacrificing accuracy. Clear identification and standards compliance for procurement The gauge is supplied to match the common workshop and quality‑assurance workflows: documented to DIN 13 and intended for metric ISO fine threads in a right‑hand form. Identification data simplify stock management and traceability: SKU M315.235.4 and GTIN 4054469126364 link the item to inventory and procurement systems. For buyers seeking dependable components for routine thread testing, the ring gauge offers a pragmatic balance of durability and standards conformity, allowing quality teams to focus on process control rather than frequent gauge replacement. For Metav IndustryLine quality and reliable thread inspection, request availability from Metav Werkzeuge GmbH in Emmerich or contact our specialists at info@metav-werkzeuge.com to confirm suitability and delivery options Technical data SKU: M315.235.4 GTIN: 4054469126364 Thread size: M35 × 1 mm Material: Hardened gauge steel Standard: DIN 13, 6g Weight: 0.54 kg Tariff number: 90173000 Facts Thread form: Metric ISO fine thread Tolerance class: 6g Hand: Right‑hand thread Category: Gauges Special features Material finish: hardened gauge steel Designed for shop‑floor inspection Robust, compact ring design For production and quality control use FAQ What thread size does this gauge check? The thread ring gauge checks M35 × 1 mm metric ISO fine threads and is manufactured to DIN 13 with tolerance class 6g. Is the gauge made from a wear‑resistant material? Yes, the gauge is produced from hardened gauge steel, providing long service life and stable checking characteristics. Is this a right‑hand or left‑hand gauge? This ring gauge is configured for right‑hand metric ISO fine threads. How is the item identified for ordering and stock control? Identification is via SKU M315.235.4 and GTIN 4054469126364, which can be used for procurement and inventory systems. Is the gauge suitable for routine workshop inspections? The robust ring design and hardened material make this gauge suitable for routine production and workshop quality checks; it is intended for fast go/no‑go verification of threaded parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x1.5 Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Data inconsistency: the fields "ausschuss" and "gut" are both set to true; please check and correct the conflicting product status before a description can be generated. This issue arises when two mutually exclusive statuses are simultaneously marked as true, which can lead to errors in processing or interpreting the product's condition. To resolve this, ensure that only one of these fields accurately reflects the product's current status. Double-check the input data for accuracy and consistency, and update the relevant field accordingly. Once corrected, the system will be able to generate a proper description without further issues.
M35x1.5 Thread Ring Gauge Metric ISO Fine Right Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of hardened gauge steel and compliance with DIN 13 (6g) for reliable, repeatable thread inspection; the M35 × 1.5 mm ring gauge delivers clear go/no‑go verification for right‑hand metric ISO fine threads. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M35 × 1.5 mm — DIN 13, 6g, right‑hand Thread ring gauge M35 × 1.5 mm for dimensional inspection of right‑hand metric ISO fine threads in production and incoming‑goods control Hardened gauge steel construction Norm DIN 13 with tolerance 6g For M35 × 1.5 mm metric ISO fine threads Right‑hand thread checking Robust construction for repeatable inspections The ring is manufactured from hardened gauge steel, a choice that increases wear resistance and keeps the geometrical form stable over repeated use. The material selection reduces dimensional drift during everyday inspection workflows, so the operator benefits from consistent go/no‑go results over the lifetime of the gauge. The solid build also minimises sensitivity to handling, which supports reliable routine checks and lowers the need for premature replacement. Proven tolerance standard for thread verification Built to DIN 13 with a 6g tolerance class, this tool provides conformity with established metric ISO thread inspection practices. The specified tolerance band enables quick discrimination between conforming and non‑conforming parts, simplifying pass/fail decisions on the shop floor. Using a gauge aligned to this standard helps integrate inspection data into quality documentation and supports traceable acceptance criteria during audits. Practical fit for workshop quality control The gauge is designed for direct use in production lines and inspection benches, offering a compact tool for verifying fine threads without elaborate setups. The M35 × 1.5 mm geometry matches common fine‑thread components, enabling fast throughput when checking batches or single parts. Its weight and form factor make handling straightforward and reduce operator fatigue during repeated measurements, contributing to steady inspection rates and fewer measurement errors. Integration into quality workflows As a dedicated thread inspection tool, the ring gauge simplifies routine control procedures and complements other metrology instruments in a quality system. When used alongside calibrated measuring tools and documented inspection steps, the gauge helps demonstrate compliance with internal quality plans. The clear physical pass/fail indication supports rapid decisions and reduces interpretation variance between inspectors. For dependable verification of fine metric threads, reserve the M35 × 1.5 mm thread ring gauge through Metav Werkzeuge — contact the Emmerich team for technical consultation and delivery coordination. Technical Data Article number: M315.235.6 SKU: M315.235.6 GTIN: 4054469126371 Weight: 0.54 kg Material: gauge steel, hardened Thread size: M35 × 1.5 mm Standard: DIN 13, 6g Facts Nominal thread: M35 Pitch: 1.5 mm Tolerance class: 6g Tariff code: 90173000 Special features Right‑hand metric ISO fine thread Hardened gauge steel construction Suitable for go/no‑go verification Category: Thread gauge / Gauge FAQ What is the intended use of this thread gauge? The thread ring gauge is intended for go/no‑go inspection of right‑hand M35 × 1.5 mm metric ISO fine threads in production and incoming‑goods control. Which standard does the gauge comply with? This ring gauge conforms to DIN 13 with a 6g tolerance class, matching common industry acceptance criteria for metric threads. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, which increases wear resistance and preserves thread geometry for repeatable inspections. How is the tool identified for orders or stock management? Reference the article number M315.235.6 or the SKU M315.235.6 when ordering or checking stock. Can the gauge be used for left‑hand threads? No, the tool is manufactured for right‑hand metric ISO fine threads and should be used only for that orientation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x1.5 Thread Ring Gauge Right Hand, Go, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a precision-tested acceptance gauge that combines conformity to DIN 13, durable hardened gauge steel, and the correct fit control for external ISO fine threads; this ensures consistent pass/fail decisions and reduces rework. Order directly via Metav Werkzeuge or consult the Metav team for application support. Thread ring gauge M35 x 1.5 mm (Go) — Metav IndustryLine, DIN 13, 6g Thread ring gauge M35 x 1.5 mm (Go) is a hardened acceptance gauge for checking external ISO metric fine threads (right‑hand) in production and quality control environments. Go ring for M35 x 1.5 ISO fine thread Hardened gauge steel for dimensional stability Manufactured to DIN 13 tolerance 6g Faster, unequivocal acceptance of external threads A dedicated go ring gauge provides a rapid, objective check for externally threaded parts: if the ring fully enters the thread, the part is accepted for assembly. Designed for repeated use in shop‑floor inspection, this gauge reduces interpretation errors that arise with visual inspection and eliminates time lost to unnecessary rework. The combination of a defined tolerance class 6g and compliance with DIN 13 gives a clear, industry‑recognised limit for production control, so process capability can be monitored with minimal effort. Robust design for production and inspection use Constructed from hardened gauge steel, the ring maintains its form under repeated handling and resists wear that would otherwise affect the pass/fail boundary. The M35 × 1.5 dimension and right‑hand thread orientation match common fastener geometries used in medium‑duty assemblies, making the gauge suitable for workshop QC, incoming inspection of purchased parts, and final assembly checks. At 0.39 kg the device is compact and portable, allowing quick checks at the machine centre or assembly bench without complex fixtures. Standards and traceability support consistent quality Manufactured to established standards, the gauge supplies a reproducible acceptance criterion that integrates smoothly into documented inspection plans. Using a ring gauge for external threads complements measurement systems by providing a go/no‑go decision that is both fast and legally defensible in production records. Metav IndustryLine’s quality focus and broad stockholding in Emmerich means reliable availability and straightforward replacement, supporting uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge today for technical guidance on integrating this Metav IndustryLine M35 go ring gauge into existing inspection procedures and to arrange supply from our Emmerich warehouse; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: M315.135.6 GTIN: 4054469124711 Weight: 0.39 kg Manufacturer: Metav IndustryLine Data Thread size: M35 x 1.5 Pitch: 1.5 mm Tolerance class: 6g Standard: DIN 13 Special features Material: hardened gauge steel Type: Go ring gauge for external threads Direction: right‑hand thread Category: Gauges / Thread gauges FAQ What is this gauge used for? The ring gauge is used to perform quick acceptance tests on external ISO metric fine threads; the Metav IndustryLine thread ring gauge M35 x 1.5 mm (Go) verifies that components meet the DIN 13, 6g specification. Does the gauge check internal threads? No, a ring gauge inspects external (male) threads; internal threads require a plug gauge. The supplied Metav IndustryLine ring is intended for external thread acceptance. What does 'Go' mean on the gauge? 'Go' indicates the acceptance limit: the gauge must enter the threaded part without forced movement. The Metav IndustryLine Go ring defines the maximum material condition for the M35 × 1.5, 6g interface. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so inspection limits remain consistent over many cycles. Is this gauge compatible with right‑hand and left‑hand threads? This specific item is manufactured for right‑hand ISO metric fine threads (M35 × 1.5). For left‑hand threads or other sizes, select the corresponding ring or plug gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x2 Gauge Ring, Metric ISO Fine Thread, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the proven combination of DIN 13 tolerance class and hardened gauge steel for fast, reliable thread checks; the compact, right‑hand M35 x 2 mm go ring gauge speeds up go/no‑go decisions on production and incoming inspection. Order the gauge directly via Metav Werkzeuge or consult the team for application advice. M35 x 2 mm Thread Ring Gauge (go) – DIN 13, right‑hand by Metav IndustryLine The M35 x 2 mm Thread Ring Gauge (go) is a purpose‑built inspection tool for verifying metric ISO fine threads in a production or quality‑control environment. Hardened gauge steel construction DIN 13 tolerance class 6g For M35 x 2 mm metric fine threads Right‑hand go ring gauge Rapid go/no‑go verification for threaded parts The M35 x 2 mm go ring gauge provides an immediate, objective check of a thread’s acceptability according to DIN 13. Designed as a single‑purpose control item, the ring confirms whether a threaded external part meets the specified metric ISO fine‑thread profile and pitch (35 mm diameter, 2 mm pitch) by giving a clear pass/fail result. This removes ambiguity from visual checks, reduces inspection time and helps maintain a smooth production flow by preventing non‑conforming parts from continuing down the line. The compact nature of the ring makes it suitable for repetitive sampling without complex setup. Built for repeatability and workshop conditions Manufactured from hardened gauge steel, the ring exhibits high wear resistance and dimensional stability, which preserves gauge integrity over many inspection cycles. The tolerance class 6g set out in DIN 13 ensures the ring represents the manufacturer’s acceptance limit for external threads, delivering repeatable results across operators. The form factor and mass support easy handling during incoming inspection or shop‑floor quality checks, while the right‑hand orientation matches common threaded components used in machinery and assemblies. Robust construction reduces maintenance and contributes to a longer usable life compared with softer inspection aids. Integrating the ring gauge into quality routines As a straightforward control tool, this go ring gauge simplifies compliance checks in workshop and production environments. It can be placed at a control station for quick sampling, incorporated into first‑off inspections or used alongside handling fixtures for batch checks. The ring’s clear go/no‑go function supports a rational inspection strategy: use the gauge to confirm dimensional conformity rapidly and reserve more detailed measurement resources for non‑conforming parts. For organisations streamlining their metrology processes, the ring is a practical component of a dependable inspection regime and complements digital measuring equipment and visual checks. Choose the Metav IndustryLine M35 x 2 mm go ring gauge for dependable, repeatable thread verification and contact Metav Werkzeuge for tailored advice or supply from Emmerich. Technical data Item number: M315.135.7 GTIN: 4054469124728 Net weight: 0.4 kg Label: Thread ring gauge M35 x 2 mm, go, DIN 13, metric ISO fine thread, right‑hand Facts Thread diameter: 35 mm Pitch: 2 mm Tolerance class: 6g Tariff code: 90173000 Special features Material: hardened gauge steel Type: Go (ring gauge) Standard: DIN 13 Thread form: Metric ISO fine thread, right‑hand Brand: Metav IndustryLine FAQ What is the primary purpose of this ring gauge? The M35 x 2 mm Thread Ring Gauge (go) is used to verify that external threads conform to the acceptance limit defined by DIN 13 for metric ISO fine threads, providing a decisive go/no‑go result. Which materials and sizes is the gauge meant for? The ring is specified for external threads with a nominal diameter of 35 mm and a 2 mm pitch; material applicability depends on the threaded part, while the gauge itself is made from hardened gauge steel. What does the tolerance class 6g indicate for thread checks? Tolerance class 6g defines the dimensional limit for external threads; the go ring is manufactured to that class so a pass indicates the part meets the specified acceptance envelope per DIN 13. Is a calibration certificate included with the gauge? Calibration details are not specified in the product data. Traceable calibration or certificates may be available as an option; please review ordering options if a documented calibration is required. How should the ring be used to ensure reliable checks? Use the ring as a go/no‑go control: ensure the part is clean, engage the thread with the ring and confirm free fitting for a go result. Avoid forcing the ring and store it protected from shock and corrosion when not in use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x2 Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of precise, standard‑compliant thread checks and durable, wear‑resistant construction to keep inspection throughput consistent. Order the gauge directly via Metav Werkzeuge or consult our specialists for application matching. Limit thread plug gauge M35 x 2 mm — Metav IndustryLine, DIN 13 / 6H, right‑hand The limit thread plug gauge M35 x 2 mm is a go/no‑go master for rapid verification of metric ISO fine threads in production and quality control environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H For M35 x 2 mm metric fine threads Right‑hand thread master gauge Fast, unambiguous go/no‑go verification on the shop floor A go/no‑go limit gauge delivers immediate, binary results: part accepted or rejected, which simplifies decision making and reduces inspection time. The M35 x 2 mm form, manufactured to DIN 13 with 6H tolerance, ensures the thread profile and pitch are checked against the correct mating limits used in metric ISO fine threads. This quick check method supports high throughput without sacrificing traceability, so assembly lines and incoming inspection stations keep moving with predictable quality outcomes. Engineered for repeatability and long service life Made from hardened gauge steel, the gauge resists wear and maintains its dimensions under regular use. Robust material selection and precise machining reduce geometric drift, which translates into fewer adjustments and less frequent rework in batch testing. The robust construction therefore contributes directly to consistent measurement results and a lower total cost of ownership through extended service intervals and reliable pass/fail performance. Practical handling and seamless inspection routines At approximately 0.51 kg, the master gauge is comfortable to handle and easy to seat into threaded components during checks. The right‑hand design and standard M35 x 2 mm thread form make it compatible with typical inspection fixtures and bench workflows. As a single‑purpose tool for thread verification, it removes ambiguity from tactile assessments and integrates cleanly into documented quality procedures and control plans for series production. Confidence from a specialist metrology range As part of the Metav IndustryLine, this limit thread plug gauge is positioned for workshops and production facilities that require industrial standards and repeatable checks. The combination of standard conformity and hardened construction offers assurance that threaded parts meet specified limits, supporting consistent assembly fit and reducing downstream rejects. For specific component queries or integration into test rigs, Metav Werkzeuge can provide further guidance and selection support. Contact Metav Werkzeuge for tailored advice and secure the Metav IndustryLine M35 x 2 mm limit thread plug gauge for repeatable, standard‑conforming thread checks delivered from Emmerich. Technical data Article number: M315.035.7 GTIN: 4054469123059 Weight: 0.51 kg Thread: M35 x 2 mm, right‑hand Facts Material: hardened gauge steel Standard: DIN 13, tolerance 6H Category: limit thread plug gauge Special features Purpose: go/no‑go inspection of metric ISO fine threads Suitable for series inspection and workshop use Robust construction for high wear resistance FAQ What thread size and pitch does this gauge check? The gauge checks M35 x 2 mm metric fine threads, manufactured to DIN 13 with 6H tolerance for go/no‑go verification. Is this a go/no‑go type gauge? Yes — the item is a limit thread plug gauge, designed to provide immediate go/no‑go results for thread acceptance. What material is the gauge made from? The gauge is made of hardened gauge steel, chosen for wear resistance and dimensional stability in repeated inspections. Is the gauge suitable for series inspection in a workshop? The design and durability of the Metav IndustryLine gauge make it well suited to series inspection and routine workshop checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x2 Thread Ring Gauge Go, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of precise, standards‑based verification combined with durable construction for reliable thread inspection. The combination of DIN 13, tolerance class 6g and hardened gauge steel ensures repeatable accept/reject decisions for metric ISO fine threads; order the ring gauge directly via Metav Werkzeuge or consult their specialists for procurement. Thread ring gauge M35 x 2 — ring gauge for metric ISO fine threads, DIN 13 (right‑hand) The Thread ring gauge M35 x 2 is a hardened gauge steel ring intended for verification of metric ISO fine external threads to DIN 13 (6g), suitable for workshop sampling and in‑process inspection. DIN 13 tolerance class 6g Hardened gauge steel construction For M35 x 2 metric ISO fine threads Right‑hand thread verification Consistent, standards‑compliant inspection for production control This ring gauge is designed to support reliable acceptance decisions in serial production and incoming inspection by conforming to DIN 13 with tolerance class 6g. The standardised specification provides a clear pass/fail criterion for external threads, reducing ambiguity during quality checks and enabling faster throughput in production lines. By referencing a defined tolerance class, inspection records and process audits become more traceable and comparable across suppliers and batches. Durable construction that keeps wear and measurement drift low Manufactured from hardened gauge steel, the gauge combines wear resistance with dimensional stability to withstand repetitive engagement with external threads. The solid construction and a mass of 0.54 kg give a robust feel during handling while helping to maintain concentricity and flank integrity over many cycles. These material and mass characteristics translate into fewer replacements and lower lifetime cost compared with softer‑finished inspection tools. Practical application for workshop and quality laboratories The ring gauge serves as a direct verification tool for metric ISO fine threads: the component is engaged with the gauge to confirm conformity to nominal diameter and thread form as specified by M35 x 2. This makes it suitable for sample testing, pre‑assembly checks and final inspection routines. The straightforward mechanical check requires minimal setup and yields immediate go/no‑go information, supporting efficient quality control without complex equipment. Where documentation is needed, the SKU and standard reference can be recorded alongside inspection outcomes for traceability. For assured thread verification and to secure supply of the M35 x 2 ring gauge from Metav IndustryLine, contact Metav Werkzeuge GmbH via +49 2822 7131930 or info@metav-werkzeuge.com to discuss availability and delivery options Technical data Article number: M315.235.7 GTIN: 4054469126388 Material: Lehrenstahl, gehärtet (hardened gauge steel) Nominal size: M35 x 2 Standard: DIN 13, 6g Weight: 0.54 kg Facts Nominal diameter: M35 Thread pitch: 2 mm Tariff number: 90173000 ECLASS: 21170214 Special features Right‑hand thread For metric ISO fine thread verification Category: Gauges (Lehren) Suitable for workshop sampling and quality inspection FAQ What does the DIN 13, 6g marking mean for inspection? The DIN 13, 6g classification defines the permissible tolerance band for external threads; the Thread ring gauge M35 x 2 is manufactured to that specification so it confirms whether a component’s external thread falls within the 6g tolerance. Is the ring gauge suitable for production use or only for laboratory checks? The ring gauge is intended for both workshop production sampling and formal inspection tasks; its hardened construction and standard compliance make it appropriate for repeated use in production environments. Which thread types can be checked with this gauge? This gauge verifies metric ISO fine external threads with the nominal size M35 x 2 and right‑hand orientation; it is not designed for left‑hand or non‑ISO thread forms. What identification should be recorded with an inspection using this gauge? Inspection records typically include the gauge designation (Thread ring gauge M35 x 2), the standard reference (DIN 13, 6g), the SKU (M315.235.7) and the inspection date to ensure traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x3 Limit Plug Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of hardened gauge steel construction and DIN 13, 6H traceability for consistent thread verification; order the limit thread plug gauge directly via Metav Werkzeuge or consult our product specialists for application advice. Limit thread plug gauge M35×3 mm, right-hand — Metav IndustryLine A limit thread plug gauge M35×3 mm for fast verification of metric ISO fine internal threads in production and inspection environments. Hardened gauge steel construction Compliant with DIN 13, 6H Right-hand metric fine thread M35×3 Consistent thread acceptance built into inspection routines The limit plug provides a clear, mechanical acceptance check for metric fine threads, ensuring that components meet the DIN 13, 6H tolerance band without lengthy measurement routines. Designed as a limit plug gauge, the tool quickly separates conforming parts from non-conforming ones by means of a physical go/no-go principle. This reduces cycle time at incoming‑inspection and on the production line, improving throughput and lowering rework rates. The straightforward function is particularly effective where rapid decisions are needed and detailed dimensional reports are unnecessary. Robust construction that reduces measurement uncertainty Manufactured from hardened gauge steel, the gauge resists wear and maintains dimensional stability under regular shop‑floor use. The right‑hand M35×3 mm thread form is machined to match the standard metric profile, which helps preserve the specified tolerance during repeated use. The tool’s mass and proportions support safe handling without excess bulk, keeping repeatability high when used manually. Where a mechanical decision is preferable to instrument-based measurement, this plug gauge supplies reliable, low‑complexity verification that is easy to integrate into standard operating procedures. Practical advantages for workshop and production use As a limit thread inspection tool, the plug gauge simplifies quality gates: the go condition confirms that the internal thread is manufactured within limits; the no‑go condition highlights exceeding material or form errors. This approach reduces dependency on measurement training, as the physical pass/fail result is immediately evident. Supplied as a single, ready-to-use gauge with traceable identifiers, it supports batch control, process capability checks and routine sampling plans. Sourcing from a specialist range streamlines procurement and supports consistent tool replacement and inventory management. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine thread plug gauges can be integrated into existing inspection plans and to request the SKU M315.035.8 for immediate supply Technical data Article number: M315.035.8 GTIN: 4054469123066 Customs tariff number: 90173000 Facts Thread size: M35×3 mm Weight: 0.51 kg Standard: DIN 13, 6H Special features Material: hardened gauge steel Right‑hand metric fine thread Category: limit thread plug gauge ECLASS: 21170235 FAQ What does the M35×3 mm designation mean? The M35×3 mm indicates a metric fine thread with a nominal diameter of 35 mm and a 3 mm pitch; the limit plug gauge M35×3 mm verifies internal threads produced to that specification. Is this gauge suitable for production‑line checks? Yes, the Metav IndustryLine limit plug gauge M35×3 mm is designed for rapid go/no‑go verification on the shop floor and in incoming inspection to reduce decision time and rework. Which tolerance does the gauge check against? The gauge is manufactured to the DIN 13, 6H standard, so it confirms whether internal threads conform to that metric ISO tolerance class. How does a limit plug gauge differ from a measuring instrument? A limit plug gauge gives an immediate mechanical pass or fail, whereas measuring instruments record numeric values; the plug is intended for fast acceptance testing rather than detailed dimensional analysis. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x3 Thread Go Ring Gauge Metric ISO Fine Right-Handed Hardened Gauge, DIN 13 6g - Metav IndustryLine
Take advantage of precise, standards-compliant thread inspection with a hardened gauge steel construction and a clear DIN 13 tolerance class of 6g; the M35 x 3 mm right‑hand 'go' ring gauge speeds routine checks and reduces rework. Order the gauge directly via Metav Werkzeuge or consult our specialists for specification advice. Thread Ring Gauge M35 x 3 mm 'go' — DIN 13, 6g (Metav IndustryLine) A Thread Ring Gauge M35 x 3 mm 'go' designed for fast verification of metric ISO fine threads (right‑hand) in accordance with DIN 13 DIN 13 tolerance 6g Hardened gauge steel construction For M35 x 3 mm metric fine thread Right‑hand 'go' ring gauge Assured compliance for metric fine threads The M35 x 3 mm 'go' ring gauge is manufactured to DIN 13 and finished to tolerance 6g, ensuring that a part's external thread meets the specified metric ISO fine‑thread limits. As a 'go' gauge, it confirms that a thread is within the allowable maximum material condition without indicating over‑tolerance failures; this direct, pass/fail check simplifies first‑article inspections and in‑process sampling. The clear conformity to an established standard reduces ambiguity during audits and supports consistent acceptance criteria on the shop floor. Built for durability and repeatable inspection Constructed from hardened gauge steel, the ring offers excellent wear resistance and maintains its checking diameter over repeated use. The robust material choice preserves the thread form and pitch during repetitive engagement, keeping verification results stable over time and thereby extending the interval between replacements. The compact, single‑function design minimises handling time, which improves throughput in high‑volume inspection routines and contributes to a dependable quality workflow. Efficient integration into production and quality control As a dedicated 'go' thread ring gauge, this master tool is ideal for rapid checks during assembly, incoming goods inspection and final control. The simple go/no‑go concept accelerates decision making on the line, helping to reduce scrap and rework while supporting traceable inspection steps. The gauge’s defined metric size and conformity to DIN standards facilitate interchangeability across suppliers and production sites, streamlining vendor validation and batch acceptance for components with M35 × 3 fine threads. Contact Metav Werkzeuge for procurement and technical clarification — request the M35 x 3 mm 'go' thread ring gauge (Metav IndustryLine) via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M315.135.8 GTIN: 4054469124735 Weight: 0.67 kg Thread size: M35 x 3 Material: Hardened gauge steel Standard: DIN 13, 6g Tariff code: 90173000 Core specifications Mass: 0.67 kg Thread pitch: 3 mm Tolerance class: 6g Metric designation: M35 × 3 Special features 'Go' ring gauge function Right‑hand thread Intended for metric ISO fine threads Category: Gauges / Ring gauges Manufacturer series: Metav IndustryLine FAQ What does the 'go' designation mean for the ring gauge? The 'go' designation on this ring gauge indicates it is used to verify that an external thread meets the lower bound of the tolerance; the M35 x 3 mm 'go' ring gauge confirms acceptance when it fits without forcing. Which standard does this ring gauge comply with? This ring gauge is manufactured to DIN 13 and produced to tolerance 6g, ensuring compatibility with metric ISO fine‑thread specifications. What material is used and why does it matter? The ring is made from hardened gauge steel, a choice that provides wear resistance and dimensional stability so the gauge retains accuracy through repeated inspections. Can the M35 x 3 mm 'go' ring gauge be used for left‑hand threads? No; this tool is specified for right‑hand metric ISO fine threads and will not correctly verify left‑hand thread forms. How should the ring gauge be stored to preserve accuracy? Store the gauge in a clean, dry environment and avoid impacts; proper storage of the M35 x 3 mm 'go' ring gauge helps preserve its calibrated form and extends its service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M35x3 Thread Go Ring Gauge Metric ISO Fine Right-Handed, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of a robust, standards‑compliant gauging solution that pairs hardened gauge steel with a DIN 13 (6g) tolerance class to secure consistent thread inspection results; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M35 x 3 mm — No‑Go ring gauge, hardened gauge steel (DIN 13, 6g) A precision thread ring gauge M35 x 3 mm designed for checking right‑hand metric ISO fine threads in production and quality‑assurance environments M35 x 3 mm metric ISO fine thread Hardened gauge steel for long service life Conforms to DIN 13 tolerance 6g Reliable verification for serial production This No‑Go ring is engineered for repeatable thread verification in serial production, ensuring that rejected parts are identified reliably before assembly. Manufactured from hardened gauge steel, the tool resists wear and preserves the defined measuring boundary over many cycles, which reduces rework rates and keeps process capability stable. Conformity to DIN 13 with tolerance 6g provides an objective, normative benchmark for acceptance decisions and supports traceable quality routines. Robust construction that reduces downtime Durable design and material choice lead to fewer gauge replacements and more uptime on the shop floor. The hardened steel body provides mechanical stability and a consistent seating surface for the mating thread, helping to avoid false rejects caused by gauge wear. With a compact mass of 0.54 kg, the ring is easy to handle during inspection and can be quickly fitted to standard inspection jigs, promoting a smooth and efficient workflow without compromising measurement integrity. Simple integration into inspection routines The ring gauge is suited for inline or offline inspection stages where a clear go/no‑go decision is required. Its right‑hand orientation and ISO fine‑thread sizing match common engineering practices for metric components, facilitating immediate use without additional adapters. For traceability, record keeping and process auditing, the gauge’s normative specification (DIN 13, 6g) simplifies documentation and supports compliance checks during incoming goods and final inspection phases. Choose the Metav IndustryLine ring gauge for proven conformity and operational resilience — contact Metav Werkzeuge for specification support or to arrange delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.235.8 GTIN: 4054469126395 Origin: Metav IndustryLine Facts Thread size: M35 x 3 mm Weight: 0.54 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Tolerance / standard: DIN 13, 6g Gauge type: No‑Go ring Thread direction: right‑hand FAQ What thread form and pitch does the gauge check? The ring checks an M35 x 3 mm metric ISO fine thread in accordance with the DIN 13 specification for tolerance class 6g. Is the gauge suitable for production line use? Yes, the No‑Go ring from Metav IndustryLine is designed for repetitive in‑process and post‑process inspection where quick accept/reject decisions are needed. What material is the gauge made of and how does that affect longevity? Manufactured from hardened gauge steel, the tool offers high wear resistance and stable boundary conditions, which extends service life and reduces gauge replacement frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36 x 3 Thread Go Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Hardened gauge steel, DIN 13 conformity and tolerance grade 6g make this ring a durable and reliable inspection tool for metric ISO fine threads; order the Thread ring gauge M36 x 3 mm directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M36 x 3 mm — Ring gauge for metric ISO fine threads, DIN 13 (Metav IndustryLine) The Thread ring gauge M36 x 3 mm is a hardened ring gauge designed to verify metric ISO fine threads to DIN 13 in production and quality control environments. Hardened gauge steel construction Suitable for metric ISO fine threads Built to DIN 13, tolerance grade 6g Right-hand thread inspection tool Fast, repeatable checks for machining and assembly A ring gauge serves as a straightforward, reliable check of internal thread form and size. Constructed from hardened gauge steel, this gauge provides a wear-resistant reference that keeps inspection times short and throughput high. Built to DIN 13 with a 6g tolerance, the gauge offers a clear acceptance criterion for shops and incoming inspection, reducing ambiguity in pass/fail decisions. The compact design ensures quick handling while preserving the thread geometry required for consistent results. Practical handling that improves workshop efficiency Weighing 0.56 kg, the ring gauge combines robustness with convenient handling on the shop floor. The modest mass and compact diameter mean the gauge can be integrated into routine sampling without slowing production. Using a dedicated gauge for periodic checks supports repeatable quality control and lowers rework rates by catching thread deviations early. For manufacturers producing or receiving M36 × 3 components, this equates to measurable time savings and fewer assembly issues. Robust material and standards for long service life The selection of gauge steel, hardened for the ring body ensures dimensional stability under regular use and resistive performance against wear. Conformity with DIN 13 and the specified tolerance class provides traceable manufacturing and inspection criteria, which helps maintain continuity between production lots. Such material and standard alignment protect the investment in inspection equipment and extend the interval between replacements. Clear application scope and inspection practice This tool is intended for inspection of metric ISO fine threads with a right-hand lead, suitable for workshop inspection, goods receiving and process control. The nominal designation M36 × 3 identifies the basic thread size; the embedded tolerance grade (6g) describes the acceptable size envelope for mating parts. In practical terms, the ring gauge is used as a go/no-go reference to confirm whether internal threads meet the specified form and fit requirements, helping teams maintain assembly reliability without complex measuring setups. For dependable thread inspection with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for ordering and application guidance: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: M315.236.8 GTIN: 4054469126449 Weight: 0.56 kg Thread designation: M36 x 3 Standard: DIN 13, 6g Customs tariff number: 90173000 Core measurements Thread size: M36 x 3 Tolerance class: 6g Weight: 0.56 kg Special features Material: hardened gauge steel For metric ISO fine threads Right-hand thread Category: Gauges / Inspection rings FAQ What is the primary purpose of this ring gauge? The Thread ring gauge M36 x 3 mm (Metav IndustryLine, SKU M315.236.8) is intended to verify internal metric ISO fine threads to DIN 13, providing a quick go/no-go style check for production and inspection. Can this gauge be used for left-hand threads? No, this ring gauge is specified for right-hand threads and is manufactured accordingly. What does the tolerance grade 6g mean for inspection? Tolerance grade 6g defines the allowable size envelope for mating external threads; using the gauge confirms the internal thread falls within the dimensional limits associated with that class. Is the gauge suitable for routine shop-floor sampling? Yes, the ring gauge’s hardened construction and compact form make it suitable for regular sampling in production and incoming inspection to help maintain consistent assembly quality. What material is the ring made from and how does that help? The ring is made from hardened gauge steel, which provides wear resistance and dimensional stability for prolonged service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36 x 3 Thread Ring Gauge Go Right-Handed, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of a robust combination of hardened gauge steel and DIN 13, tolerance 6g to guarantee reliable pass/fail results at the inspection station; the compact M36 x 3 mm go ring gauge ensures fast throughput and stable repeatability. Order the gauge directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Thread ring gauge M36 x 3 mm (go) — Metric ISO fine thread, right-hand (Metav IndustryLine) A Thread ring gauge M36 x 3 mm (go) for rapid, repeatable pass/fail inspection of metric ISO fine threads in component production and incoming inspection Hardened gauge steel for long service life DIN 13 tolerance class 6g M36 x 3 mm metric fine thread Right-hand go gauge for quick inspection Reliable conformity checks that protect production quality This go ring gauge is designed for clear pass/fail decisions during routine thread inspection. Made from hardened gauge steel, the gauge resists wear and maintains dimensional stability over many cycles, which reduces the need for frequent replacement and supports consistent production output. Conformity to DIN 13 and the tolerance class 6g gives a defined acceptance envelope for metric ISO fine threads, so measurement decisions rest on recognised standards rather than estimation. The compact, purpose-built shape simplifies engagement with threaded parts and aids in reproducible inspection routines. Practical use at the control bench for efficient workflow The ring checks internal thread form by offering a direct functional test: the thread must run onto the gauge without play for a successful "go". That straightforward procedure speeds up inspection compared with more time‑consuming dimensional measures and lowers staff training time for basic checks. The gauge’s M36 x 3 mm specification and right‑hand thread orientation match common fine‑thread applications in mechanical assemblies, making it suitable for series production and incoming part verification. At roughly 0.55 kg, the ring is robust yet manageable for bench use and fits into standard instrument trays for safe storage between checks. Durable, traceable tooling for repeatable metrology practice Built for workshop endurance, the gauge combines standard compliance with a clear functional purpose: to confirm that internal threads meet the metric ISO fine thread profile within the 6g tolerance. The item is identified by GTIN 4054469124780 and a tariff classification for logistics. Using standardised gauges such as this one helps to maintain traceability in quality records and supports easier communication with suppliers and certification bodies. For operations seeking continuity and documented inspection practice, the ring gauge provides a simple, defensible method to demonstrate thread conformity at the production line. Choose Metav IndustryLine for standardised thread inspection: order the M36 x 3 mm go ring gauge through Metav Werkzeuge for dependable gauges matched to industry standards — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for a specific application Technical Data Article number: M315.136.8 GTIN: 4054469124780 Weight: 0.55 kg Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Thread size: M36 x 3 mm Tolerance class: 6g Standard: DIN 13 Mass/weight: 0.55 kg Special features Hardened gauge steel Right-hand thread Go (pass) ring gauge Category: Gauges / Ring gauges FAQ What does "go" mean for this ring gauge? The "go" designation indicates that the ring is intended as a functional pass gauge; a part that threads onto the gauge without interference meets the acceptance criteria for the specified M36 x 3 mm metric ISO fine thread. Which standard and tolerance class apply to the gauge? The ring conforms to DIN 13 with tolerance class 6g, providing a clear, standardised acceptance limit for metric fine threads. Is this gauge suitable for series production inspection? Yes, the hardened construction and standard conformity make the gauge appropriate for routine pass/fail checks in series production and incoming goods inspection. How is the gauge identified for traceability? Identification is provided by the article number M315.136.8 and GTIN 4054469124780, which supports traceable record keeping in quality systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x1 Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of precise, hardened gauge-steel construction and conformity to DIN 13, 6H for reliable thread verification; combine durable materials and compact design for repeatable pass/fail inspection. Order the limit thread plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit thread plug gauge M36 x 1 mm (metric ISO fine, right-hand) — Metav IndustryLine A limit thread plug gauge M36 x 1 mm designed for fast, on‑the‑bench verification of right‑hand metric ISO fine internal threads in production and inspection workflows Hardened gauge steel construction For M36 x 1 mm metric ISO fine thread Right-hand thread verification Manufactured to DIN 13, 6H Consistent pass/fail verification to protect production quality A limit thread plug gauge provides immediate, objective pass/fail results that reduce uncertainty at the inspection stage. Made from hardened gauge steel, this gauge holds its geometry under repeated use, which preserves the critical thread dimensions. Conformity to DIN 13 and the 6H tolerance class ensures assessments are comparable across machines and shifts, so faulty batches are identified quickly and rework loops are shortened. The compact, single-piece design supports fast handling in assembly and quality‑control stations. Practical benefits for workshop and factory workflows Using a dedicated plug gauge for a specific thread such as M36 x 1 mm speeds routine checks and cuts measurement time compared with full metrological evaluation. The tool is intended for straightforward verification of internal threads: the gauge either enters (go) or is blocked at the control limit (no-go), enabling decisive actions on the shop floor. Robust construction means fewer replacements and consistent performance, improving throughput and lowering inspection costs while maintaining repeatable results for production runs. Built for durability and traceable conformity The robust material choice—gauge steel, hardened—makes the gauge resistant to wear and preserves the critical thread form for long service life. As a simple, standardised inspection instrument for right‑hand metric ISO fine threads, it integrates easily into existing quality routines and complements dimensional measurement equipment. The compact weight and form factor support safe storage and rapid use at workstations, contributing to dependable process control in metalworking environments. Contact Metav Werkzeuge for procurement and technical advice on the Metav IndustryLine limit thread plug gauge or to request delivery and specification details; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.036.4 GTIN: 4054469123080 Category: Gauges / Plug gauges Facts Thread size: M36 x 1 mm Weight: 0.7 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Thread form: metric ISO fine, right-hand Tolerance class: DIN 13, 6H Brand: Metav IndustryLine FAQ What is the intended use of this plug gauge? The limit thread plug gauge M36 x 1 mm from Metav IndustryLine is intended for pass/fail verification of right‑hand internal metric ISO fine threads in production and inspection settings. Does the gauge comply with a recognised standard? Yes, the tool is manufactured to DIN 13 and the 6H tolerance class, ensuring standardised checks for metric ISO threads. What material is used and how does it affect service life? The gauge is made of hardened gauge steel, which gives high wear resistance and stable geometry under repeated inspection cycles, extending usable lifetime. Can this gauge be used for left‑hand threads? No, this particular limit plug gauge is specified for right‑hand metric ISO fine threads and is not suitable for left‑hand thread verification. What identifiers help with procurement and traceability? Use the Article number M315.036.4 and GTIN 4054469123080 for ordering and traceability of the Metav IndustryLine plug gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x1 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of rapid pass/fail inspection and long-term wear resistance thanks to hardened gauge steel and conformity to DIN 13, 6g. Combine precise thread verification with robust construction for fewer rejects and predictable production flow — order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M36 × 1.0 mm (go) — Go ring gauge, DIN 13, Metav IndustryLine A Thread ring gauge M36 × 1.0 mm (go) for fast, repeatable verification of metric ISO fine threads in production and inspection environments Go ring gauge for M36 × 1.0 mm Conforms to DIN 13, tolerance 6g Hardened gauge steel construction Right‑hand thread verification Fast, reliable pass/fail control for threaded parts A go ring gauge provides the simplest, most efficient form of thread acceptance: the gauge either engages (pass) or it does not (fail). The M36 × 1.0 mm go ring manufactured to DIN 13, 6g offers a clear decision criterion at the inspection station, reducing cycle times compared with measurement-based checks. For production lines and incoming inspections, this direct check cuts handling time, lowers scrap rates and provides a documented limit check that is easy to implement in routine quality procedures. Robust design tailored for repetitive use Constructed from hardened gauge steel, this ring gauge resists wear during frequent use and maintains a stable acceptance limit over time. The right‑hand configuration matches standard metric ISO fine threads and the compact, balanced mass (approx. 0.4 kg) improves handling during rapid checks. Durable materials and heat treatment mean longer service intervals and fewer replacements, which translates into lower total cost of ownership for the inspection equipment fleet. Seamless fit into quality systems and traceable labelling The go ring is supplied with clear identifiers (SKU and GTIN) for stock keeping and traceability in quality documentation. As a Metav IndustryLine product, the gauge benefits from the supplier’s quality‑filter approach in Emmerich, ensuring consistent conformity to the specified tolerance DIN 13. Where a simple pass/fail result is required to prevent nonconforming assemblies from progressing, this ring gauge is an effective, low‑complexity solution that integrates easily into existing inspection workflows. Secure reproducible thread checks with the Metav IndustryLine go ring — request the M36 × 1.0 mm go ring via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for application support Technical data Article number: M315.136.4 GTIN: 4054469124759 Weight: 0.4 kg Facts Nominal size: M36 Thread pitch: 1.0 mm Tolerance class: 6g Tariff number: 90173000 Special features Go ring gauge, right‑hand Material: gauge steel, hardened Standard: DIN 13 Category: Ring gauge / Thread gauge FAQ What does 'go' mean for this ring gauge? A go gauge verifies that a thread meets the minimum acceptance profile; the ring should assemble freely on a correctly formed M36 × 1.0 mm thread, as specified for this go ring gauge. Which standard and tolerance class apply to this gauge? This ring gauge conforms to DIN 13 with a tolerance class of 6g, the specification used for metric ISO fine thread acceptance. Is the gauge suitable for left‑hand threads? This item is a right‑hand go ring; left‑hand threads require the corresponding left‑hand ring gauge. What material and durability can be expected? Manufactured from hardened gauge steel, the ring is designed for repeated use with good wear resistance and stable runout over time. Can this ring gauge be used as a calibration standard? The gauge is intended for go/no‑go acceptance checks. For calibrated master standards, a dedicated calibration artefact or reference master should be used instead. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x1 Thread Ring Gauge For Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Precision inspection made simple: rely on the combination of DIN 13, 6g tolerance and a hardened gauge-steel construction to secure reproducible thread checks in production. Benefit from a compact, hand‑portable ring that supports efficient acceptance decisions — order directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M36 x 1 mm (DIN 13, 6g) — Metav IndustryLine The Thread ring gauge M36 x 1 mm is a right‑hand, DIN 13 6g gauge designed for quick verification of metric ISO fine threads in workshop and production environments. Hardened gauge steel for long service life DIN 13, 6g tolerance for metric fine threads Compact hand-held design, weight 0.56 kg Ensure reliable in‑process thread acceptance The DIN 13 standard and 6g tolerance class provide a clear, industry‑recognised basis for go/no‑go inspection: the gauge confirms whether an M36 × 1 mm thread meets the required geometric limits without time‑consuming set‑up. Using a dedicated ring instead of visual checks reduces cycle time and removes subjective judgement from acceptance steps. This measurable decision logic supports consistent output and fewer downstream reworks, making the gauge a pragmatic element of a lean quality routine. Robust build for everyday workshop use Constructed from hardened gauge steel, the ring resists wear during routine contact checks and maintains dimensional stability over repeated use. At 0.56 kg, the component is compact enough for handheld inspection yet substantial enough to sit firmly when gauging by hand. The right‑hand geometry is tailored for standard metric fine threads, and the simple mechanical design requires no power or electronics, offering immediate readiness on the shop floor and minimal maintenance demands. Traceability and workflow fit This ring gauge integrates straightforwardly into existing inspection workflows and documentation. Identifiers such as SKU M315.236.4 and the GTIN support stock control and traceable asset management. Conformity to DIN 13 simplifies acceptance criteria across suppliers and production stages, while the compact form enables rapid sampling on machining centres or assembly benches. For series checks, the gauge provides an efficient, repeatable pass/fail criterion that complements more detailed measuring methods when required. For assured thread control and fast delivery, contact Metav Werkzeuge in Emmerich to place an order for the Metav IndustryLine ring gauge or to request tailored application guidance by phone or email. Technical data Article number: M315.236.4 GTIN: 4054469126418 Label: Gewinde-Lehrring M36 x 1 mm Aussch. DIN 13, f. metr. ISO-Feingewinde, rechts Facts Thread size: M36 × 1 mm Weight: 0.56 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13, 6g Right-hand thread Category: Lehren (gauges) FAQ What tolerance class does this ring gauge use? The ring gauge is manufactured to DIN 13 with a 6g tolerance class; the Metav IndustryLine thread ring gauge M36 x 1 mm (SKU M315.236.4) is therefore suitable for standard metric ISO fine‑thread acceptance. Is the ring gauge suitable for repeated workshop use? Yes, the ring is made from hardened gauge steel, which ensures wear resistance and dimensional stability during frequent go/no‑go checks with the Metav IndustryLine gauge. Does this gauge check right‑hand threads only? The delivered ring is configured for right‑hand metric ISO fine threads in the M36 × 1 mm size. Can this gauge be used for rapid sampling on the production line? Yes, the compact, hand‑portable design and clear go/no‑go function make the gauge suitable for fast sampling and routine acceptance checks in production. How is the product identified for stock and traceability? The gauge is listed under SKU M315.236.4 with GTIN 4054469126418 for inventory management and traceable documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x1.5 Thread Gauge, DIN 13 6g For Metric ISO Fine Right-Hand Threads - Metav IndustryLine
A hardened M36 x 1.5 metric thread ring offers reproducible inspection results and robust service life thanks to its DIN 13 / 6g conformity and gauge‑steel construction; for reliable QC, order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M36 x 1.5 — Right‑hand ISO metric fine‑thread inspection gauge (Metav IndustryLine) Thread ring gauge M36 x 1.5 for inspection of right‑hand ISO fine threads, designed for use in workshop and production quality control M36 x 1.5 metric fine‑thread ring gauge Hardened gauge steel for long service life Manufactured to DIN 13 tolerance 6g Right‑hand ISO metric fine‑thread inspection Consistent conformity for acceptance testing The ring gauge is manufactured to DIN 13 with tolerance class 6g, making it suitable as a go/no‑go master for fine‑thread acceptance. Its geometry reflects the ISO metric fine‑thread profile, so in routine checks the gauge delivers objective go/no‑go decisions that reduce interpretation errors during incoming inspection or final control. The compact mass of 0.56 kg contributes to stable handling and minimises chatter during manual gauging operations. Durable construction that reduces replacement cycles Produced from hardened gauge steel, the ring sustains contact wear over prolonged use and therefore retains its limiting dimensions longer than untreated masters. The material choice and heat treatment provide a cost‑efficient lifetime compared with softer gauges, lowering total cost of ownership in production environments. This durability supports repeatable measurements and reduces downtime caused by frequent replacement of worn reference tools. Streamlined measurement processes for workshop workflows Integration of this ring into standard inspection routines is straightforward: use it as a reference during batch sampling or as part of a first‑article inspection procedure. The right‑hand, fine‑thread geometry is directly applicable to metric ISO fine threads in fasteners and components. Clear pass/fail results simplify operator training and speed throughput, while the gauge’s solid construction eases handling on the shop floor and in stamping or assembly lines. Contact Metav Werkzeuge today to request the Metav IndustryLine M36 x 1.5 thread ring gauge or for tailored advice on implementing it into existing quality routines Technical data Article number: M315.236.6 GTIN: 4054469126425 Manufacturer: Metav IndustryLine Weight: 0.56 kg Material: hardened gauge steel Standard: DIN 13, 6g Facts Thread size: M36 x 1.5 Tolerance class: 6g Handing: right‑hand thread Special features For metric ISO fine threads Go/no‑go inspection use Robust heat‑treated construction Category: ring gauge / inspection gauge FAQ What inspection tasks is this ring gauge suited for? The ring gauge is intended for acceptance and go/no‑go checks of M36 x 1.5 right‑hand metric ISO fine threads and is suitable for workshop and production quality control. How does DIN 13 / 6g affect measurement decisions? Conformity to DIN 13 with tolerance class 6g defines the limiting dimensions used for go/no‑go evaluation, so the ring provides standardised pass/fail results that align with common ISO metric thread specifications. What material is used and why does it matter? The gauge is made of hardened gauge steel, selected to resist wear and maintain limiting dimensions over many inspection cycles, which improves repeatability and reduces the need for early replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x1.5 Thread Ring Gauge Go, ISO Metric Fine Thread Right-Hand, DIN 13 6g, Hardened Plug Steel - Metav IndustryLine
Reliable thread verification in production is achieved through the combination of a hardened gauge steel body, the DIN 13 tolerance class 6g, and the compact form factor weighing 0.4 kg; these attributes support repeatable checks and long service life. Order the Go ring gauge M36 x 1.5 mm directly via Metav Werkzeuge or ask our consultants if needed. Go Ring Gauge M36 x 1.5 mm — Metav IndustryLine, hardened gauge steel, DIN 13 (6g) Go Ring Gauge M36 x 1.5 mm is a hardened ring gauge for fast verification of right-hand metric ISO fine threads in production and inspection environments. DIN 13, tolerance class 6g Hardened gauge steel construction For M36 x 1.5 metric fine threads Right-hand thread verification Reliable in-line checks that reduce rework A compact Go ring gauge provides a straightforward, rational solution for pass/fail checks at the machine or inspection bench. By confirming the external thread against the DIN 13 standard and 6g tolerance class, the gauge helps prevent assembly failures and downtime. The gauge's simple, single-purpose design removes interpretation from go/no-go decisions, so measurement routines become faster and less error-prone. The result is a tangible improvement in throughput and fewer rejects during final inspection. Durable construction for sustained accuracy Manufactured from hardened gauge steel, the ring resists wear and maintains its form through repeated use, ensuring repeatability across production batches. The material choice and heat treatment provide the mechanical stability required for routine thread verification, while the compact mass of 0.4 kg makes handling and storage straightforward. As a purpose-built right-hand thread gauge for M36 x 1.5 mm, it delivers a robust tool for regular quality control with clear traceable performance over time. Practical fit within quality workflows Integration into a control plan is immediate: the ring serves as a quick go/no-go reference during final inspection or as part of a process control loop. The straightforward design supports rapid training of operators and reduces the need for complex measurement equipment for routine checks. Paired with Metav IndustryLine logistics and advisory services, this gauge contributes to a consistent, auditable inspection regime and supports the wider objective of accessible precision across workshops. For Metav IndustryLine thread gauges, contact Metav Werkzeuge to confirm compatibility and arrange supply from Emmerich for tailored delivery and advice. Technical Data SKU: M315.136.6 GTIN: 4054469124766 Description: Go ring gauge M36 x 1.5 mm, right-hand Facts Thread size: M36 x 1.5 Tolerance class: 6g Weight: 0.4 kg Tariff number: 90173000 Materials & Features Material: hardened gauge steel Standard: DIN 13 Gauge type: Go ring gauge, right-hand thread Category: Thread gauge / ring gauge FAQ How is the gauge used in a production environment? The Go ring gauge M36 x 1.5 mm is used as a quick go/no-go check on external threads; the part must pass freely on the gauge for a compliant thread according to DIN 13 (6g). What does the 'Go' specification mean for inspection? A Go ring gauge indicates that the external thread meets the minimum material and form requirements; the Metav IndustryLine ring will accept any thread that fits without forcing, ensuring consistent pass criteria. Is the gauge suitable for right-hand threads only? Yes, this ring is manufactured for right-hand metric ISO fine threads and is specifically intended for M36 x 1.5 mm right-hand applications. How long can the gauge be expected to remain accurate under normal use? Constructed from hardened gauge steel, the gauge provides high wear resistance and durable performance for routine inspections; service life depends on handling and inspection frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x2 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a standard‑compliant inspection tool that combines DIN 13 / 6H tolerance control with a hardened gauge‑steel construction for durable use in production environments; order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge M36 x 2 mm — metric ISO fine thread (right‑hand), Metav IndustryLine The Limit plug gauge M36 x 2 mm is a hardened, right‑hand limit gauge manufactured for quick verification of metric ISO fine internal threads in workshop and production settings. DIN 13 tolerance class 6H Hardened gauge steel construction Designed for M36 x 2 metric ISO thread Stable 0.7 kg mass for secure handling Reliable conformity to DIN 13 for consistent acceptance decisions The limit plug gauge is produced to DIN 13 with tolerance class 6H, a specification that defines the acceptable limits for metric ISO internal threads. This conformity means the gauge provides a clear, repeatable criterion for pass/fail decisions during incoming inspection or in‑process checks. Using a standardised limit gauge reduces subjective judgement and speeds up quality control: a single insertion confirms whether a thread meets the established tolerance band without the need for complex measuring setups. The design is focused on delivering consistent acceptance criteria for series production and sample testing. Robust construction that supports efficient workshop routines Constructed from hardened gauge steel, the gauge combines wear resistance with dimensional stability, helping to maintain accuracy over prolonged use. The compact mass of 0.7 kg gives the tool a reassuring feel and improves handling during manual inspection, reducing the likelihood of misalignment when checking internal threads. The right‑hand M36 x 2 geometry corresponds to common fine‑thread applications in mechanical assemblies; the component is therefore readily integrated into routine thread inspection at machine bays or control benches. Durable materials and a straightforward form factor translate into fewer replacements and predictable inspection intervals. Practical integration into quality systems and procurement As a purpose‑built limit gauge from Metav IndustryLine, this instrument supports robust quality workflows with minimal training required. The clear binary result typical of limit gauges simplifies documentation and traceability in production records. Purchasing through Metav leverages a broad supply chain: transparent logistics from Emmerich and a large catalogue reduce lead times and supplier complexity for maintenance and production teams. The combination of standard compliance, durable materials and a recognisable manufacturer makes this gauge a pragmatic choice for companies seeking dependable thread verification equipment. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine limit plug gauge into existing inspection routines or to request information about batch availability and delivery options Technical data Article number: M315.036.7 GTIN: 4054469123103 SKU: M315.036.7 Facts Thread size: M36 x 2 Mass: 0.7 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, tolerance class 6H Thread direction: right‑hand Category: limit plug gauge FAQ What does tolerance class 6H signify for this gauge? Tolerance class 6H indicates the internal thread tolerance band defined by DIN 13; the Limit plug gauge M36 x 2 mm manufactured by Metav IndustryLine is produced to match that specification for reliable acceptance testing. Can the gauge be used for production spot checks? Yes. The Metav IndustryLine limit plug gauge M36 x 2 mm is intended for quick acceptance checks and in‑process spot testing where a pass/fail decision is required without in‑depth dimensional measurement. What material is the gauge made from and why does it matter? The gauge is manufactured from hardened gauge steel, a material chosen for wear resistance and dimensional stability to ensure long service life and consistent inspection results. Is this a right‑hand or left‑hand thread gauge? The instrument is a right‑hand thread limit plug gauge designed specifically for M36 x 2 metric fine threads. How should the gauge be handled to preserve accuracy? Handle the gauge carefully, store it in a protective environment, and avoid impacts; the hardened construction enhances durability but correct handling ensures sustained conformity to DIN 13. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x2 Thread Ring Gauge Go, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of a precise, standards‑compliant inspection tool that combines DIN 13 (6g) tolerancing with hardened gauge steel construction for consistent go/no‑go checks; order directly via Metav Werkzeuge or consult their specialists for application advice. Thread Ring Gauge M36 x 2 mm (Go) — DIN 13, hardened gauge steel — Metav IndustryLine The thread ring gauge M36 x 2 mm is a compact, workshop‑grade inspection gauge for approval testing of metric ISO fine external threads; designed as a right‑hand Go gauge for fast pass/fail verification DIN 13 tolerance class 6g Hardened gauge steel construction Go (accept) ring for external threads Compact weight 0.4 kg Ensure correct fit for metric fine threads with clear pass/fail results The primary purpose of this ring gauge is to provide a reliable, repeatable acceptance check for external threads under the DIN 13 specification with tolerance class 6g. As a Go gauge, it verifies that a threaded part meets the lower limit of the tolerance band and will assemble without compromise; this removes guesswork during series production and supports process control. The specification and functional design make the instrument suitable for incoming inspection and in‑process checks where fast, unequivocal decisions on conformity are required. Robust construction reduces replacement and handling effort Manufactured from hardened gauge steel, the gauge resists wear and preserves the calibrated profile over repeated cycles, reducing the need for frequent replacement. The compact mass of 0.4 kg and the solid ring form factor support easy handling on the shop floor while maintaining the necessary profile stiffness to avoid false rejects. These material and construction choices translate into lower total cost of ownership for routine dimensional control in metalworking environments. Easy integration into quality routines and traceability systems The ring gauge is intended for direct use in standard inspection sequences and complements documented quality procedures where conformity to DIN 13 (6g) is required. Traceability is supported by the clear article identifiers and the use of a standard metric designation, which helps when recording inspection results in quality reports or production logs. Its function as a dedicated Go gauge streamlines operator training and reduces measurement variability in repetitive checks. For reliable metric thread inspection, choose the Metav IndustryLine ring gauge and contact Metav Werkzeuge in Emmerich for expert application support and assured supply. Technical data Article number: M315.136.7 GTIN: 4054469124773 ECLASS: 21170214 Facts Thread size: M36 x 2 mm Weight: 0.4 kg Standard: DIN 13 (6g) Customs tariff no.: 90173000 Special features Type: Go (accept) ring gauge Thread hand: Right‑hand Material: Gauge steel, hardened Intended use: Inspection of metric ISO fine external threads FAQ What does the Go designation mean for this gauge? The Go designation indicates that the ring gauge checks the lower limit of the tolerance for an external thread; the thread ring gauge M36 x 2 mm (Metav IndustryLine, SKU M315.136.7) accepts parts that assemble under the specified tolerance. Which standard and tolerance class does this gauge comply with? This gauge is manufactured to DIN 13 and conforms to tolerance class 6g, making it suitable for metric ISO fine threads where that specification is required. Is the material suitable for repeated workshop use? Yes; the hardened gauge steel construction ensures wear resistance and dimensional stability for frequent inspection cycles in an industrial environment. Can this gauge be used for left‑hand threads? No; this ring gauge is produced for right‑hand threads only. For left‑hand or different pitches, a corresponding gauge is required. How should the gauge be stored to maintain accuracy? Store the gauge clean and dry, protected from shock and contamination. The hardened material provides durability, but correct handling and storage prolong service life and maintain the calibrated profile. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com