Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M36x2 Thread Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
The combination of hardened gauge steel, adherence to DIN 13 (6g) tolerances and a clear No‑Go function provides dependable rejection of out‑of‑tolerance threads; order the inspection ring directly via Metav Werkzeuge or consult our specialists for integration into production control. No‑Go Thread Ring Gauge M36 x 2 mm — hardened gauge steel, DIN 13 The No‑Go Thread Ring Gauge M36 x 2 mm is a right‑hand inspection ring for quick verification of metric ISO fine threads in production and quality control. No‑Go gauge for clear rejection Hardened gauge steel construction DIN 13 tolerance class 6g M36 x 2 mm right‑hand thread Ensure only conforming threads proceed on the line The principal advantage of this inspection ring is consistent rejection: when a thread fails the No‑Go check, the part is immediately identified as non‑conforming, which reduces downstream rework and scrap rates. Built to verify metric ISO fine threads, the ring converts a subjective visual or tactile inspection into a binary, repeatable check. That rational clarity shortens decision times during routine checks and supports a faster, more efficient quality workflow. Robust material for repeatable results Manufactured from hardened gauge steel, the ring is dimensionally stable and resists wear under frequent use, which prolongs service life and maintains measurement certainty. The solid construction and designed contact geometry ensure repeatable engagement with the thread flanks; this repeatability is the technical basis for reliable pass/fail decisions on the shopfloor. The modest mass of the ring contributes to stable handling without unnecessary bulk during manual inspections. Compliance with recognised standards and tight tolerances Conformance to DIN 13 and the 6g tolerance class means the gauge matches established inspection criteria for metric threads, facilitating straightforward acceptance decisions in procurement and incoming inspection. Where documented evidence of inspection criteria is required, the specified standardisation simplifies communication between suppliers, production and quality management. Using standardised gauges accelerates audits and supports traceable quality routines. Practical inspection use and workplace fit Designed as a right‑hand inspection ring for M36 x 2 threads, the tool integrates into existing inspection benches and on‑process controls without complex training. The No‑Go function is especially useful where a rapid reject condition must be enforced to protect assembly steps downstream. Complementary handling practices — gentle cleaning after use and storage in a dry, protected spot — keep the gauge performing reliably over many cycles and maintain the integrity of the mating parts. For a production‑ready thread control solution from Metav IndustryLine, request the No‑Go Thread Ring Gauge M36 x 2 mm through Metav Werkzeuge; technical advice and ordering assistance are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M315.236.7 GTIN: 4054469126432 Category: Gauges / Inspection rings Tariff number: 90173000 Core specifications Thread size: M36 x 2 mm Pitch: 2 mm Weight: 0.56 kg Tolerance class: 6g Thread direction: Right‑hand Special features Material: hardened gauge steel Standard: DIN 13 Function: No‑Go inspection ring (reject check) Intended use: Metric ISO fine threads FAQ What is the primary purpose of this gauge? The No‑Go Thread Ring Gauge M36 x 2 mm is intended to provide a definitive No‑Go check for metric ISO fine threads, ensuring parts that exceed tolerance limits are rejected at inspection. Which standard and tolerance does the ring conform to? The inspection ring conforms to DIN 13 and the tolerance class 6g, matching common acceptance criteria for metric threads. Is this ring suitable for left‑hand threads? No, the gauge is manufactured for right‑hand threads only and will not correctly assess left‑hand thread forms. What is the material and how durable is it? Made from hardened gauge steel, the ring offers high abrasion resistance and dimensional stability for frequent use in quality routines. Can the gauge be used directly in production control? Yes; the gauge is designed for shopfloor inspection and can be incorporated into incoming inspection and in‑process checks to provide rapid pass/fail decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x3 Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a compact inspection tool that combines DIN 13 / 6H conformity, hardened gauge-steel construction and a clear go/no-go function for reliable thread control in production. Order the gauge directly via Metav Werkzeuge or consult the team for application advice. Thread limit gauge mandrel M36 x 3 – metric ISO fine thread, right-hand (Metav IndustryLine) A Thread limit gauge mandrel M36 x 3 for rapid verification of M36×3 metric ISO fine threads in workshop and production environments, designed for repeatable go/no-go assessment. DIN 13 tolerance class 6H Hardened gauge steel construction M36 x 3 metric ISO fine thread Right-hand go/no-go verification Fast, reliable in-process control for threaded parts For production lines and inspection benches that demand speed and clarity, the mandrel provides an immediate go/no-go decision without interpretation. The gauge is made of hardened gauge steel, ensuring dimensional stability and wear resistance over repeated cycles; this supports a consistent acceptance criterion against the DIN 13 thread standard with 6H tolerance. The direct mechanical verification minimises downtime during quality checks and reduces the need for time‑consuming measurement setups, while the solid mass (approx. 0.75 kg) gives controlled insertion behaviour and a tactile confirmation of fit. Built for durability and traceable conformity The construction emphasises long service life and conformity to common industry practice. The M36 x 3 profile matches metric ISO fine-thread specifications and the right-hand form is suited to standard threaded components in machine-building and assembly operations. Being manufactured from hardened gauge steel means the instrument resists deformation and provides reproducible results over its service life, which supports process stability and fewer false rejects. Use of a limit gauge like this provides a clear, objective criterion that complements statistical process control and shop‑floor inspection routines. Practical handling and integration in the workshop The mandrel is compact to handle yet substantial enough to avoid accidental flex during checks; this balance simplifies repetitive inspection tasks and supports a steady workflow. Its simple go/no-go principle requires minimal operator training yet fits naturally into documented inspection steps and quality plans. For traceability, the gauge can be recorded in tooling lists and inspection logs alongside other measuring equipment; when paired with a robust storage routine its service life is maximised. Metav’s supply and documentation practices help integrate this gauge seamlessly into an established metrology setup. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine thread limit gauge mandrel M36 x 3 into existing inspection processes and to secure immediate availability from the Emmerich stock. Technical data SKU: M315.036.8 GTIN: 4054469123110 Manufacturer: Metav IndustryLine Core specifications Thread size: M36 x 3 Weight: 0.75 kg Tariff number: 90173000 ECLASS: 21170235 Materials and standards Material: gauge steel, hardened Standard: DIN 13, 6H Right-hand thread FAQ What does the M36 x 3 designation indicate? The designation refers to a metric ISO fine thread with a nominal diameter of 36 mm and a pitch of 3 mm; the mandrel is shaped to verify that thread form. Is this gauge suitable for production go/no-go checks? Yes, the Metav IndustryLine thread limit gauge mandrel M36 x 3 is intended for rapid go/no-go verification in production and inspection environments. Which standard does the gauge comply with? The instrument is manufactured to check threads against DIN 13 with a 6H tolerance class. What material is the gauge made from and why does it matter? Constructed from hardened gauge steel, the mandrel resists wear and maintains dimensional stability, ensuring reproducible checks over time. Can the mandrel be used on left-hand threads? No; this mandrel is specified for right-hand metric ISO fine threads only. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x4 Go/No-Go Thread Plug Gauge Right-Handed, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of DIN 13 6H compliance, robust hardened gauge steel construction and clear Go/No‑Go functionality to speed up thread inspection and reduce reruns; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. M315.036 — Limit thread plug gauge M36 x 4 mm (ISO metric, right‑hand) The M315.036 is a limit plug gauge for quick pass/fail inspection of M36 x 4 mm ISO metric threads, suited to production and incoming‑inspection tasks Hardened gauge steel construction DIN 13 6H tolerance Go/No‑Go function for M36 x 4 mm Fast and reliable pass/fail control for threaded parts The limit plug gauge offers a compact, operator‑friendly method for verifying metric threads without measuring instruments. The Go/No‑Go principle gives an immediate binary result: the Go end confirms the internal thread meets the specified profile and pitch, while the No‑Go end detects oversize or damaged threads. Built to DIN 13 6H, this gauge supports consistent acceptance criteria and reduces decision time on the production line, improving throughput and lowering the risk of assembly faults. Durable construction for repeatable measurements Manufactured from hardened gauge steel, the tool resists wear and maintains form accuracy under repeated use, which preserves the original tolerance limits during routine checks. A mass of 0.67 kg provides a reassuring feel in the hand while remaining simple to handle at inspection benches. The right‑hand metric design is tailored for standard ISO threads, offering repeatability and a long service life when stored and used according to workshop best practice, thereby reducing the frequency of replacements. Simple integration into quality workflows The plug gauge is intended as a practical control instrument within workshop quality systems and works well alongside visual inspection and sampling plans. Clear labelling and the supplied identifiers facilitate traceable record keeping and fast part identification. For serial production or incoming inspection, the gauge performs a dedicated role: it is not a measuring instrument but a verification tool that streamlines end‑of‑line checks and supports consistent conformance to thread specifications. Arrange a technical check or procurement discussion with Metav Werkzeuge to confirm the M315.036’s suitability for your thread control needs and to agree delivery and handling options Technical data Article number: M315.036 GTIN: 4054469123073 Thread: M36 x 4 mm Type: Right‑hand Material: hardened gauge steel Standard: DIN 13, 6H Net weight: 0.67 kg Tariff number: 90173000 ECLASS: 21170235 Numbers / Core technical data Weight: 0.67 kg Thread size: M36 x 4 mm Standard designation: DIN 13, 6H GTIN: 4054469123073 Tariff number: 90173000 Materials / Special features Hardened gauge steel Go/No‑Go (limit) plug gauge design Right‑hand ISO metric thread verification Robust construction for workshop use FAQ What does the Go/No‑Go function check on this gauge? The gauge uses a Go end to confirm the internal thread conforms to the M36 x 4 mm profile and a No‑Go end to detect oversize or damaged threads; the M315.036 provides immediate pass/fail feedback for inspection routines. Is the M315.036 suitable for production line spot checks? Yes. The M315.036 limit plug gauge is intended for rapid spot checks in production and incoming‑inspection environments where fast, repeatable decisions on thread acceptability are required. Which standard does this thread gauge comply with? This plug gauge adheres to DIN 13 6H, providing a standardised acceptance basis for ISO metric threads in industrial quality systems. How should the gauge be maintained to preserve accuracy? Store the gauge clean and dry, avoid shocks and contamination, and follow routine visual inspections; the hardened gauge steel construction helps maintain form and wear resistance under normal workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36x4 Thread Ring Gauge Go, ISO Metric Right-Hand, DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Precise conformity to DIN 13 and a hardened gauge steel body make this no‑go ring gauge a reliable tool for detecting out‑of‑tolerance external threads; its right‑hand design and metric ISO sizing support fast, repeatable inspections on the shop floor. Order the gauge via Metav Werkzeuge or contact the consultants for application advice. Thread ring gauge M36 x 4 (No‑Go) — hardened gauge steel, DIN 13 (Metav IndustryLine) The Thread ring gauge M36 x 4 (No‑Go) is a hardened right‑hand ring gauge for verification of metric ISO threads, intended for production and inspection use where clear go/no‑go decisions are required No‑go ring gauge M36×4 DIN 13 6g Hardened gauge steel construction Right‑hand metric ISO thread verification Ideal for fast go/no‑go checks in production Ensure rejected parts are detected, not passed The primary function of a no‑go ring gauge is to prevent oversized or out‑tolerance external threads from being accepted. Constructed from hardened gauge steel, this ring gauge conforms to DIN 13 with tolerance 6g, providing a clear physical limit: a correct external thread will not allow the no‑go ring to fully enter. Using a dedicated ring gauge for this check removes ambiguity from visual inspection and reduces subjective judgement, which in turn improves repeatable inspection results and reduces rework downstream. Save time in process control with a compact verification tool Designed for direct use at the production line or in the inspection bay, the right‑hand M36 x 4 no‑go ring gauge supports quick go/no‑go assessments without complex measurement setups. The simple acceptance criterion—either the ring gauge enters or it does not—translates into faster throughput and lower cycle times for quality control. As a result, routine checks on turned or rolled external threads become less error‑prone, enabling efficient statistical process control and consistent output for assembly operations that rely on metric ISO thread interfaces. Built for durability and stable performance Hardened tool steel construction ensures dimensional stability and wear resistance during repeated use. The choice of hardened gauge steel reduces surface damage and preserves the defined functional limit over many inspection cycles, so maintenance intervals are extended and calibration drift is minimised. Where traceable records are required, the robust construction combined with standard compliance simplifies integration into existing inspection procedures and supports reliable, long‑term quality assurance in workshops and manufacturing environments. For dependable thread rejection and concise inspection workflow, request the Metav IndustryLine M36×4 no‑go ring gauge via Metav Werkzeuge — specialists are available to advise on fitment and implementation Technical data Article number: M315.236 GTIN: 4054469126401 Manufacturer: Metav IndustryLine Material: hardened gauge steel Size: M36 x 4 Standard: DIN 13, 6g Facts ECLASS: 21170214 Tariff number: 90173000 Special features No‑go (Ausschuss) ring gauge for external threads Right‑hand metric ISO thread application Category: thread ring gauge / inspection gauge FAQ What is the purpose of a no‑go ring gauge? A no‑go ring gauge is used to verify that an external thread does not exceed the upper limits of its tolerance; the M36 x 4 no‑go ring gauge ensures oversized threads are identified and rejected. Can this gauge be used for left‑hand threads? This specific gauge is manufactured for right‑hand metric ISO threads; left‑hand checks require a corresponding left‑hand ring gauge. Which standard does this gauge comply with? The gauge is produced to DIN 13 with tolerance class 6g, matching common metric ISO thread inspection requirements. How is the gauge identified in stock and orders? The item is listed as M315.236, the Metav IndustryLine no‑go ring gauge for M36 x 4 threads Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M36×1.5 Thread Go/No-Go Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Product data conflict: the fields "ausschuss" (scrap) and "gut" (good) are both set to true — cannot generate a reliable product description. This issue arises when contradictory values are assigned to critical fields, leading to ambiguity in the product's status. The "ausschuss" field indicates that the product is considered scrap and unsuitable for use, while the "gut" field signifies that the product is deemed good and fit for purpose. When both fields are simultaneously marked as true, it creates a logical inconsistency that prevents the generation of an accurate and trustworthy product description. Resolving this conflict is essential to ensure clarity and reliability in product data.
M36×4 Thread Go Ring Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Reliable inspection of metric ISO threads is achieved by the combination of hardened gauge steel and conformity to DIN 13, tolerance class 6g, while the M36 x 4 mm right‑hand go ring enables quick go/no‑go checks; order the ring gauge directly via Metav Werkzeuge or request application advice from our consultants. Go Ring Gauge M36 x 4 mm — Thread Gauge (DIN 13, 6g), Metav IndustryLine The Go Ring Gauge M36 x 4 mm is a hardened metric thread ring for speedy conformity checks of ISO threads in production and quality control. Hardened gauge steel for long-term stability Conforms to DIN 13, tolerance class 6g Metric ISO thread M36 x 4 mm, right-hand Compact, workshop-ready design Fast, standardised pass/fail inspection for ISO threads The Go Ring Gauge M36 x 4 mm serves as a dedicated pass gauge for routine inspection of metric ISO threads. Built to the DIN 13 specification with tolerance class 6g, the ring verifies whether a threaded external component meets the required profile and fundamental dimensions. Employing a simple go/no‑go principle reduces interpretation time during sampling and provides a clear, repeatable decision criterion for production and incoming inspection. Where traceable conformity is required, the ring integrates easily into established quality procedures and documentation. Built to last — stable dimensions and reduced maintenance Manufactured from hardened gauge steel, the ring gauge resists wear that would otherwise affect measurement reliability. The material choice and heat treatment maintain the internal profile under repeated use, extending service life and reducing the need for frequent replacement. The compact construction and balanced mass (approximately 0.86 kg) support ease of handling and minimise the risk of accidental distortion in the workshop. Durable design thus delivers lower lifecycle costs and consistent inspection results over time. Simple integration into inspection routines and traceability As a primary check tool in thread control, the ring gauge complements dimensional measuring equipment and visual inspection. Its straightforward function—accept or reject—streamlines sample testing and forms a reliable first line of defence against out‑of‑tolerance parts. For inventory and documentation, the item is identifiable by its article code M315.136 and GTIN, supporting traceability and stock management. The ring is particularly suitable for operator-led checks on assembly lines and as part of statistical process control workflows. Typical applications and user benefits The ring is aimed at manufacturing, fastener production, component finishing and maintenance shops where metric ISO threads are produced or received. Inspectors and shopfloor technicians benefit from a tool that provides immediate verification of thread conformity without complex measurement procedures. The right‑hand M36 x 4 mm specification matches common industrial fasteners, enabling rapid acceptance testing during production runs or incoming goods inspection. Robustness and compliance with recognised standards make the gauge a dependable choice for everyday use. Contact Metav Werkzeuge today for application advice or to request a quotation for the Metav IndustryLine go ring gauge M36 x 4 mm — reachable from our Emmerich centre: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M315.136 GTIN: 4054469124742 Manufacturer: Metav IndustryLine Facts Thread size: M36 x 4 mm Weight: 0.86 kg Tolerance class: 6g Tariff number: 90173000 Special features Material: hardened gauge steel Right‑hand thread Type: Go (pass) ring gauge Standard: DIN 13 FAQ What is the purpose of this ring gauge? The ring gauge checks whether external threads meet the metric ISO profile and tolerances; the Metav IndustryLine go ring gauge M36 x 4 mm (SKU M315.136) provides a clear pass result when the part fits. Which tolerance standard does the gauge conform to? This ring is manufactured to DIN 13 and specified for tolerance class 6g, which is typical for general engineering and workshop inspection of metric threads. How durable is the gauge for daily use? Made from hardened gauge steel, the ring gauge resists wear from repeated contact and is suitable for regular shopfloor inspection without rapid loss of dimensional stability. Can this gauge be used for left‑hand threads? No, this specific item is produced for right‑hand threads only; left‑hand variants must be ordered separately to match handedness requirements. Is the ring suitable for fast, inline sampling? Yes, the compact design and go/no‑go function make it ideal for rapid sampling on production lines and incoming goods checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38 x 3 mm Thread Ring Gauge ISO Metric Fine Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, conformity to DIN 13 (6g) and the precise M38 x 3 mm pitch for reliable, repeatable thread inspection; order directly via Metav Werkzeuge or contact our consultants for specification support. Thread Ring Gauge M38 x 3 mm — Metav IndustryLine (DIN 13, 6g) The Thread Ring Gauge M38 x 3 mm is a hardened inspection ring designed for validated checking of metric ISO fine threads in production and quality control environments. Hardened gauge steel for long service life Conforms to DIN 13 tolerances (6g) For M38 x 3 mm metric ISO fine threads Right‑hand thread inspection ring, 0.56 kg Reliable inspection to DIN standards for repeatable acceptance This inspection ring is specified to DIN 13 with a tolerance class of 6g, which directly translates into consistent go/no-go acceptance limits for metric ISO fine threads. The gauge’s geometry is engineered to match the nominal M38 x 3 mm profile, enabling quick verification of pitch and major diameter during incoming goods checks or final inspection. Using a purpose-made ring gauge reduces subjective judgement in thread assessment and shortens inspection time, supporting a higher throughput in production while maintaining documented conformity. Built for durable, repeatable measurements on the shop floor Manufactured from hardened gauge steel, the ring provides mechanical stability and wear resistance that sustain measurement integrity over repeated cycles. The mass of approximately 0.56 kg gives the component enough bulk to be handled steadily without excessive flex, while the robust material resists nicks that could otherwise compromise fit checks. As a calibrated mechanical control element, the ring gauge serves as a straightforward tool for fabricators and inspectors who need a tactile, low‑complexity method for checking fine-threaded parts without intermediate instruments. Integrates cleanly into quality workflows and documentation As a dedicated thread inspection device, the ring facilitates standardised inspection steps in quality control plans and process sheets. Its compliance with DIN 13 supports traceability in audit situations and simplifies batch release routines: the clear pass/fail outcome from a ring check is straightforward to record and to communicate across production teams. When combined with Metav’s supply chain and product support, this component contributes to dependable inspection sequences that help reduce rework and maintain customer confidence. Contact Metav Werkzeuge for application advice or to confirm stock availability of the Metav IndustryLine thread ring gauge and arrange delivery from Emmerich. Technical data Article number: M315.238.8 GTIN: 4054469126487 Manufacturer: Metav IndustryLine Facts Thread size: M38 x 3 mm Weight: 0.56 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, tolerance class 6g For metric ISO fine threads, right‑hand FAQ What is the purpose of this thread ring gauge? This ring gauge is intended for inspection and acceptance testing of M38 x 3 mm metric ISO fine threads; the Thread Ring Gauge M38 x 3 mm verifies compliance with DIN 13 (6g). Is the gauge suitable for production use or only for lab checks? The gauge is designed for shop‑floor and production‑line inspections as well as for quality‑control benches; its hardened gauge steel construction supports frequent use. How does the DIN 13, 6g specification affect inspection criteria? DIN 13 with tolerance 6g defines the dimensional limits that the Thread Ring Gauge M38 x 3 mm conforms to, enabling binary accept/reject decisions aligned with ISO metric thread standards. Can the ring gauge be used for threads of different pitch or diameter? No — the gauge is specific to M38 x 3 mm nominal size; accurate inspection of other diameters or pitches requires the correspondingly sized ring. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38x1 Go Thread Ring Gauge, Metric ISO Fine Thread, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Benefit from reliable pass/fail checks and long-term wear resistance thanks to hardened gauge steel and compliance with DIN 13 (6g); the result is efficient inspection of metric fine threads and fewer production interruptions. Order or request application advice directly via Metav Werkzeuge for swift delivery and expert guidance. Thread Ring Gauge M38 x 1 mm — Go, DIN 13, Hardened Gauge Steel (Metav IndustryLine) A Thread Ring Gauge M38 x 1 mm (Go) for rapid verification of metric ISO fine threads to DIN 13 with tolerance class 6g, right-hand Hardened gauge steel construction DIN 13 tolerance class 6g For M38 x 1 mm metric fine threads Reliable go/no-go inspection that reduces rework The ring functions as a go gauge for quick acceptance testing of fine-pitch metric threads. Built to the DIN 13 specification with tolerance class 6g, the device enables immediate pass/fail decisions on threaded components, preventing uncertain measurements and cutting time spent at inspection stations. Because the check is binary, quality teams achieve repeatable results without complex measurement procedures, improving process throughput and lowering the risk of scrap. Robust material and geometry for repeatable measurements Manufactured from hardened gauge steel, the ring is heat-treated to resist wear and maintain dimensional stability under repeated use. The stable geometry of the ring preserves the critical thread profile, so wearing effects are minimised and recalibration intervals are extended. This longevity translates into fewer replacements and predictable inspection performance on the shop floor, supporting continuous production cycles and reliable lot acceptance. Designed for efficient production-line verification The lightweight yet sturdy construction (approx. 0.45 kg) makes the ring easy to handle during rapid checks while remaining rigid enough for consistent engagement with mating threads. The right-hand metric ISO fine thread geometry (M38 × 1 mm) suits components found in precision assemblies, where correct pitch and fit are essential. Using the ring for routine checks reduces measurement uncertainty and frees skilled measuring resources for more complex quality tasks. Traceability and identification for quality records The gauge is supplied with clear identification for inventory and traceability purposes, allowing simple integration into quality control documentation. The compact form factor supports fast station-to-station use and easy storage when not in service. For procurement and stock control, the item is listed under SKU M315.138.4 and carries GTIN 4054469124797, enabling precise replacement ordering and record keeping. Secure conformity on the production line—contact Metav Werkzeuge for delivery and technical advice on this Metav IndustryLine thread ring gauge. Email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability for specific applications and lead times. Technical data Article number: M315.138.4 GTIN: 4054469124797 Weight: 0.45 kg Thread size: M38 x 1 mm Thread direction: Right-hand Standard: DIN 13, 6g Type: Go (pass) ring gauge Material: Gauge steel, hardened Facts Nominal diameter: 38 mm Thread pitch: 1 mm Tolerance class: 6g Mass: 0.45 kg Special features Hardened gauge steel construction Metric ISO fine thread compatibility Right-hand thread verification Category: Gauge ring / Lehre FAQ What does the "go" designation mean for this thread ring gauge? The "go" designation indicates a pass gauge; the ring must assemble onto a correctly manufactured thread. The Thread Ring Gauge M38 x 1 mm (Go) verifies that internal or external threads meet the minimum acceptance geometry specified by DIN 13 with tolerance class 6g. Is the ring suitable for fine-pitch metric threads only? Yes. The gauge is specified for M38 x 1 mm, which is a metric ISO fine thread. It is designed to check the geometry and fit of fine-pitch metric threads rather than coarse or non-metric thread forms. How does hardened gauge steel affect performance? Hardened gauge steel increases wear resistance and dimensional stability, so the ring maintains its form over many inspection cycles. This material choice ensures repeatable checks and extends the gauge’s service life under typical shop-floor conditions. Can this gauge be used on both internal and external threads? The product is a ring gauge intended for verifying the external thread on a mating component or the internal thread accordingly when used as the corresponding reference. For specific inspection workflows, use the ring as the go-check for the targeted mating thread. Which standards and identification are provided for traceability? The item conforms to DIN 13 with tolerance class 6g and is listed under SKU M315.138.4 with GTIN 4054469124797 for traceability and procurement records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38x1 Limit Thread Go/No-Go Plug Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a hardened gauge steel construction and DIN 13 tolerance class to secure reliable go/no-go assessments for metric fine threads. The compact, right-hand limit plug provides immediate pass/fail decisions that reduce rework and speed up inspection routines. Order the gauge directly via Metav Werkzeuge or consult the Metav specialists for application advice. Limit thread plug gauge M38 x 1.0 mm — Metric ISO fine thread, hardened gauge steel (Metav IndustryLine) Limit thread plug gauge M38 x 1.0 mm is a hardened go/no-go gauge for quick verification of metric ISO fine threads in right-hand form. Hardened gauge steel construction Conforms to DIN 13 tolerance class 6H Right-hand M38 x 1.0 mm metric fine thread Engineered for dependable pass/fail inspection The limit plug delivers a straightforward, reproducible control method: a part either fits the go end or it fails the no-go check, removing ambiguity from routine inspections. Manufactured to DIN 13 with tolerance class 6H, this gauge supports consistent acceptance criteria across batches and suppliers, helping to minimise production downtime. Because the component is made from hardened gauge steel, resistance to wear is enhanced, which preserves the gauge’s conformity over many inspection cycles. Built for repeatability and long service life Robust material choice and precise machining reduce dimensional drift and sustain measurement integrity in high-throughput environments. The right-hand thread geometry and the specified metric pitch ensure compatibility with standard M38 components, enabling quick checks on assemblies and machined parts without auxiliary tools. The solid construction also contributes to stable handling during inspection, lowering the risk of operator-induced errors and thus improving process reliability. Integrates cleanly into quality workflows Limit gauges like this one simplify decision-making at inspection stations: they provide an immediate, rational verdict that can be documented in quality records and traced back through production batches. Using a dedicated plug gauge shortens cycle times compared with comparative or micrometric checks and supports lean inspection practices. The simple go/no-go principle complements statistical quality control and can be combined with visual tagging or production stop rules to prevent nonconforming parts from entering assembly. Compliance and practical benefits for the shop floor Conformance to recognised standards and the use of hardened gauge steel mean fewer recalibrations and a predictable lifespan under normal workshop conditions. The compact design and clear right-hand metric form make the gauge suitable for bench testing, in-process inspection, or final acceptance checks. Traceable specifications and stable performance help maintain supplier confidence and reduce the throughput cost of sorting and rework. For secure, first-rate thread verification order this Metav IndustryLine limit gauge through Metav Werkzeuge — contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.038.4 SKU: M315.038.4 GTIN: 4054469123127 Core specifications Thread size: M38 x 1.0 mm Tolerance class: 6H Weight: 0.8 kg Tariff number: 90173000 Materials & features Material: gauge steel, hardened Standard: DIN 13 Right-hand metric fine thread Go/no-go limit plug design FAQ What is the intended use of this limit plug gauge? The limit plug gauge is designed for go/no-go verification of metric ISO fine threads; the Metav IndustryLine plug enables quick acceptance checks on M38 x 1.0 mm right-hand threads (SKU M315.038.4). Does the gauge conform to an international standard? Yes, the gauge is manufactured to DIN 13 with tolerance class 6H, ensuring standardised acceptance criteria for metric fine threads. What material is the gauge made from and why does it matter? The plug is made from hardened gauge steel, chosen for wear resistance and dimensional stability so that the gauge retains accuracy over repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38x1.5 Thread Gauge Ring Right-Hand ISO Fine Thread DIN 13, Hardened Gauge Steel - Metav IndustryLine
Take advantage of DIN 13 conformity and hardened gauge steel construction to ensure reliable thread rejection testing for metric ISO fine threads; combine robustness and clear specification to streamline incoming inspection workflows. Order the Thread Gauge Ring directly via Metav Werkzeuge or consult our specialists for application support. Thread Gauge Ring M38 x 1.5 mm — No‑go, DIN 13 (6g) by Metav IndustryLine The Thread Gauge Ring M38 x 1.5 mm is a hardened verification ring designed for rejection testing of metric ISO fine threads in production and quality control environments. DIN 13, tolerance 6g compliance Hardened gauge steel construction No‑go ring for rejection testing Compact, 0.56 kg mass for workshop use Measurable conformity that removes doubt from inspection The no‑go verification ring is manufactured to DIN 13 with a 6g tolerance, providing an unambiguous pass/fail decision for M38 × 1.5 mm metric ISO fine threads. By using a dedicated rejection ring rather than subjective gauging methods, inspection cycles become faster and more repeatable, which supports leaner incoming inspection and reduces the risk of assembly faults. The clear mechanical limit set by this gauge removes interpretation from the inspection process and enhances production reliability. Durable build for frequent handling and industrial environments Constructed from hardened gauge steel, the ring offers high wear resistance and dimensional stability during repeated use. The compact mass of 0.56 kg and robust geometry make the tool easy to handle on the shop floor while resisting the typical abrasion of daily checks. The material choice ensures long service life under standard workshop conditions and maintains the gauge’s mating characteristics, reducing the need for frequent replacements. Simple procedure, faster throughput As a purpose‑made no‑go ring, the tool supports straightforward rejection testing: a tight, mechanical evaluation that takes seconds per part. This simplicity translates into improved throughput in quality control routines and a lower training threshold for operators, since no electronic readout or interpretation skills are required. The mechanical design is optimised for repeatable contact and quick alignment with threaded components, making it suitable for both bench inspection and fast sampling from production runs. Where this gauge fits into production and QC The ring is intended for verification of metric ISO fine threads in machining, assembly and incoming goods inspection. Typical applications include component acceptance in mechanical assemblies and spot checks on turned or ground parts. The combination of standard compliance, hardened construction and compact handling makes it a pragmatic choice for workshops seeking consistent rejection criteria without adding complex measurement steps. Contact Metav Werkzeuge for precise application advice and to secure the Metav IndustryLine no‑go thread gauge for dependable rejection testing in your quality workflow Technical data Article number: M315.238.6 SKU: M315.238.6 GTIN: 4054469126463 Facts Mass/Size: M38 x 1.5 mm Weight: 0.56 kg Tariff number: 90173000 Eclass: 21170214 Special features Material: Hardened gauge steel Standard: DIN 13, tolerance 6g Thread type: Metric ISO fine thread, right‑hand Brand: Metav IndustryLine FAQ What is the primary use of this gauge? The Thread Gauge Ring M38 x 1.5 mm by Metav IndustryLine is used for no‑go rejection testing of M38 × 1.5 mm metric ISO fine threads to provide a clear pass/fail assessment. Which standard and tolerance does the ring comply with? Manufactured to DIN 13 with a 6g tolerance, the thread gauge ring meets common workshop and production inspection requirements for fine metric threads. Is this a go or no‑go gauge? This specific ring functions as a no‑go (rejection) ring for the designated M38 × 1.5 mm thread form, intended to identify oversized or out‑of‑tolerance internal threads. What material is the gauge made from and how durable is it? The gauge is produced from hardened gauge steel, offering wear resistance and dimensional stability suited to frequent use in industrial inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38x1.5 Thread Ring Gauge ISO Metric Fine Right-Hand 6g Hardened Gauge Steel DIN 13 - Metav IndustryLine
Take advantage of a hardened gauge steel construction and conformity to DIN 13, 6g for fast, reliable verification of metric fine threads; order the gauge directly via Metav Werkzeuge or request advice from our consultants for seamless integration into production control. Go Thread Ring Gauge M38 x 1.5 (DIN 13, 6g) — Hardened Gauge Steel (Metav IndustryLine) The Go Thread Ring Gauge M38 x 1.5 is a hardened right‑hand metric ISO fine thread gauge designed for rapid inspection of external threads in production and quality control settings. Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g For M38 x 1.5 metric fine threads Assured conformity for production control A solid inspection step removes uncertainty: the go gauge confirms that an external thread sits within the allowable envelope specified by DIN 13 with tolerance class 6g, which directly reduces the risk of assembly failures and rejects. As a purpose‑made ring gauge for M38 x 1.5 threads, it allows quick go/no‑go checks at the workbench or in a designated control station, speeding throughput by replacing time‑consuming measurement routines with a single tactile confirmation. This rational approach improves process stability and helps maintain consistent quality across batches. Durable build that copes with repetitive use Made from hardened gauge steel, the ring gauge is engineered for wear resistance during frequent use. Hardening increases surface durability so that the acceptance limit remains stable over many inspections, which reduces the need for early replacement and lowers total cost of ownership. The right‑hand configuration and compact ring form make the gauge simple to handle and less prone to accidental damage than larger measuring fixtures. For workshops and production lines where repeatability matters, this construction ensures long service life and reliable go‑decision repeatability. Practical traceability and workshop integration The compact design and clear designation simplify storage and traceability: the gauge’s SKU M315.138.6 and GTIN 4054469124803 support inventory control and documentation in quality records. As a dedicated thread inspection tool, it integrates easily into standard quality workflows and jigs; the tactile go check can be performed at the machine or at a final inspection point without complex setup. Using a purpose-built ring gauge streamlines routine checks, reduces measurement time and helps maintain operator focus on value‑adding tasks. Contact Metav Werkzeuge in Emmerich to discuss supply and delivery of the Metav IndustryLine go thread ring gauge M38 x 1.5 and to confirm stock availability or special requirements Technical Data Article number: M315.138.6 GTIN: 4054469124803 Manufacturer: Metav IndustryLine Thread: M38 x 1.5 Standard: DIN 13, 6g Facts Weight: 0.35 kg Pitch: 1.5 mm Tariff number: 90173000 Special features Material: hardened gauge steel Type: Go thread ring gauge Hand: right‑hand Category: Gauges / Lehren FAQ What does the gauge check? The Go thread ring gauge M38 x 1.5 verifies external metric ISO fine threads of nominal size M38 with a 1.5 mm pitch to the acceptance limits of DIN 13, tolerance class 6g. Is this a go or no‑go gauge? This item is a go gauge: it is intended for checking whether an external thread fits within the upper acceptance limits; the ring passes only when the measured thread is within the specified tolerance. What material is the gauge made from? The ring gauge is manufactured from hardened gauge steel, providing wear resistance for frequent inspection cycles. How should the gauge be used in production? Use the ring gauge for a quick tactile acceptance check at the workpiece or inspection station; if the thread enters the ring freely, it is within the specified tolerance stated by DIN 13, 6g. Can this gauge be recorded in the quality system? Yes. The ring gauge’s designation and identifiers, including SKU M315.138.6 and GTIN 4054469124803, support traceability and documentation within quality records. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38x2 Limit Thread Plug Gauge Right-Hand Metric ISO Fine Pitch, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Benefit from DIN 13 conformity, hardened gauge steel and precise M38 x 2 thread control for dependable go/no-go checks; improve inspection throughput and reduce rework. Order this limit thread plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. M38 x 2 mm Metric ISO Limit Thread Plug Gauge (Right-hand) — Metav IndustryLine A Metav IndustryLine M38 x 2 mm limit thread plug gauge for quick verification of metric ISO fine threads in workshop and production environments. Metric ISO M38 x 2 thread Hardened gauge steel construction Tolerance class DIN 13, 6H Right-hand limit plug gauge Ensure correct fit and consistent torque behaviour on threaded components The limit thread plug gauge is designed to give fast, reproducible verification of internal threads. With a nominal diameter of 38 mm and a 2 mm pitch, this gauge checks the acceptance limit of metric ISO fine threads according to DIN 13 and 6H tolerance. The hardened gauge steel body resists wear, so the gauge maintains dimensional stability over repeated cycles and supports reliable process control in assembly lines or incoming inspection. Reduce rejects and save inspection time with a robust go/no-go solution Using a dedicated limit plug eliminates subjective judgement: the part either accepts the gauge or it does not, which simplifies decision-making and accelerates throughput. The right-hand configuration is compatible with standard thread directions encountered in most mechanical assemblies. By integrating this mechanical limit check into routine inspection, traceable conformity is achieved without the need for complex measuring equipment, which benefits production teams focused on efficiency and reproducibility. Durable construction for repetitive use in industrial environments The gauge is manufactured from hardened measurement steel to resist abrasion and preserve the functional contours that define the limit condition. Hardened surfaces reduce the frequency of replacement and ensure long-term dimensional integrity. The compact, purpose-made design supports quick manual handling and fits standard gauge trays or fixtures, making it suitable for both workshop benches and inline process checkpoints. Traceability and specification alignment for quality management Identification details such as M38 x 2, DIN 13 and the article number M315.038.7 permit straightforward documentation in inspection reports and quality records. The simple pass/fail nature of the tool complements statistical process control routines and provides a clear link between measured results and corrective actions. For organisations aiming to standardise inspection across multiple lines, the gauge supplies an unambiguous, low-complexity control point. Discuss compatibility and delivery options with Metav Werkzeuge to confirm the gauge suits the intended thread series and inspection workflow Technical data Article number: M315.038.7 GTIN: 4054469123141 Material: Gauge steel, hardened Norm: DIN 13, 6H Thread: M38 x 2 Weight: 0.61 kg Tariff number: 90173000 Facts Nominal diameter: 38 mm Pitch: 2 mm Tolerance class: 6H Mass: 0.61 kg Special features Right-hand thread Complies with DIN 13 Hardened gauge steel construction Category: Lehren / Messstifte Condition: good FAQ What thread size and pitch does this gauge check? The gauge checks a metric ISO thread of M38 x 2, verifying the acceptance limit for that nominal diameter and pitch. Is the gauge suitable for production line use? Yes; the Metav IndustryLine limit thread plug gauge is made from hardened gauge steel and is intended for repetitive go/no-go verification in workshop and production environments. Which tolerance standard does the gauge follow? The tool is made to DIN 13 with a 6H tolerance class for metric ISO fine threads. How is the gauge identified for traceability? Identification is by article number M315.038.7 and GTIN 4054469123141, which can be recorded in inspection documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38x2 Thread Go Gauge For Metric ISO Fine Threads, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of precise, standards‑compliant thread inspection with a Go ring that combines proven DIN 13 tolerancing and hardened gauge steel for reliable, repeatable checks; order directly via Metav Werkzeuge or consult our specialists for application guidance. Thread Ring Gauge M38 x 2 mm (Go) — DIN 13, 6g, right‑hand by Metav IndustryLine A Thread Ring Gauge M38 x 2 mm (Go) designed for fast and accurate verification of metric ISO fine threads in production and incoming inspection. Go ring for M38 x 2 threads Hardened gauge steel construction Made to DIN 13, tolerance 6g Right‑hand metric ISO fine thread Accurate pass/fail control for production environments The Thread Ring Gauge M38 x 2 mm (Go) provides an immediate go/no‑go decision that speeds up inspection processes and reduces downtime. Manufactured to DIN 13 with a 6g tolerance class, this gauge gives a clear, standards‑based reference for the acceptance of metric ISO fine threads. Using a dedicated Go ring simplifies operator tasks: parts that pass the gauge are confirmed within tolerance, eliminating lengthy micrometrology steps for every workpiece and enabling rapid throughput without compromising traceability. Durable design for long service life and consistent results Constructed from hardened gauge steel, the ring gauge resists wear and maintains dimensional stability under repeated use, ensuring consistent results over time. The solid construction and thoughtful heat treatment reduce the need for frequent replacement, which is particularly beneficial in high‑volume inspection stations. With a mass of 0.45 kg, the tool is robust enough for bench use yet manageable for routine handling. The combination of material and geometry preserves the reference form and helps maintain reproducible measurements across inspection cycles. Simple integration into inspection routines and documentation As a dedicated right‑hand Go ring for M38 x 2 threads, this gauge slots into existing quality workflows with minimal adjustment. It is intended for quick manual checks at receiving, in‑process control or final inspection, and can be incorporated into checklists and batch records to support quality audits. Clear labelling and standard dimensions aid operator training, while the compact form factor facilitates storage alongside other gauges. For traceable results in contract or certified environments, include the component checks in routine calibration schedules and inspection logs. For consistent thread inspection across production, request the Metav IndustryLine Thread Ring Gauge M38 x 2 or contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: M315.138.7 GTIN: 4054469124810 Weight: 0.45 kg Facts Thread: M38 x 2 mm Tolerance class: 6g Tariff number: 90173000 Special features Material: hardened gauge steel Type: Go ring (acceptance gauge) Standard: DIN 13 Thread direction: right‑hand; metric ISO fine thread FAQ What does the "Go" designation mean for this ring gauge? The Go designation indicates that the ring is the acceptance gauge; a workpiece thread that enters the Thread Ring Gauge M38 x 2 mm (Go) meets the required maximum material condition for the specified DIN 13 tolerance. Is the ring suitable for inspection of fine threads only? Yes, this ring is specifically made for metric ISO fine threads in the M38 x 2 size and is intended for rapid verification of that thread profile. How long can the hardened gauge steel retain accuracy under normal use? Hardened gauge steel provides excellent wear resistance; with correct handling and storage the gauge retains form for prolonged service, although actual longevity depends on usage frequency and environmental conditions. Can this gauge be used for right‑hand and left‑hand threads? This particular ring is manufactured for right‑hand threads; left‑hand thread verification requires a corresponding left‑hand gauge. Is traceability to standards provided with the gauge? Dimensional conformity is to DIN 13 with tolerance class 6g; for formal calibration certificates or specific accreditation details, include such requirements when ordering. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38x2 Thread Ring Gauge Go DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Reliable verification of M38×2 metric fine threads, combined with DIN 13 (6g) tolerance conformity and hardened gauge steel construction, supports repeatable quality checks on production lines. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge M38 x 2 mm (ISO metric fine thread, right-hand, DIN 13, 6g) Thread Ring Gauge M38 x 2 mm for quick verification of right-hand ISO metric fine threads in workshop and production environments Metric ISO fine thread M38×2 DIN 13 tolerance class 6g Hardened gauge steel construction Right-hand thread inspection Consistent conformity checks that save rework The ring offers a fast, unambiguous check for external threads, converting dimensional requirements into a simple pass/fail action. By complying with DIN 13 and the 6g tolerance band, the gauge helps to confirm thread form and pitch without extensive measurement setups, reducing the risk of mismatched assemblies. The hardened gauge steel body resists wear so that the verification result remains reliable across many cycles, which in turn lowers rework rates and production interruptions. Robust design for repeated use on the shop floor Designed for repetitive inspection, the gauge combines a compact mass of 0.56 kg with a wear-resistant material treatment, keeping handling comfortable while maintaining mechanical stability. The right-hand M38×2 profile is manufactured to industrial tolerances for direct engagement with turned or rolled threads, enabling rapid checks during in-process control or final inspection. The construction minimises deformation during handling, so dimensional drift is reduced and service intervals are extended. Simple integration into quality workflows Inspection with this ring gauge requires minimal training and no specialised equipment: the threaded part is engaged and the result is immediate, providing a rational and efficient decision tool for production and inspection staff. Using a dedicated threaded ring for each nominal diameter keeps traceability clear and speeds up first-article inspections and batch checks. For users needing catalogue matching or inventory planning, the M315.238.7 identifier supports straightforward ordering and stock control. For a reliable supply of Metav IndustryLine thread gauges and advice on integrating them into existing inspection routines, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M315.238.7 GTIN: 4054469126470 Thread designation: M38×2 Standard: DIN 13, 6g Weight: 0.56 kg Numbers / Core technical data ECLASS: 21170214 Tariff number: 90173000 Mass: 0.56 kg Special features Material: gauge steel, hardened Right-hand thread For metric ISO fine threads Category: thread gauges / inspection gauges FAQ What is this gauge used for? This thread ring gauge is used to verify external M38×2 ISO metric fine threads for conformity with DIN 13, 6g, providing a rapid go/no-go style check in production or inspection. Which materials is the gauge suitable for inspecting? The ring inspects threaded parts regardless of base material; the gauge itself is made from hardened gauge steel to withstand repeated engagement. How does the gauge support production quality control? By converting dimensional tolerances into a simple acceptance check, the gauge reduces measurement time and supports consistent decisions during in-process control and final inspections; it is listed as M315.238.7 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38x3 Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The product record contains contradictory information that prevents the generation of a reliable product description. Specifically, the item is flagged simultaneously as both rejected and as acceptable, which creates an unresolved status for quality and availability. Automated text production requires consistent, verifiable data; conflicting status flags mean key claims about condition, usability and supply cannot be stated with confidence. Please review and correct the product entry—ensure the quality/status indicators are aligned and any other inconsistent fields are reconciled—then resubmit the record. Once the data is consistent, a complete, standards-compliant description including technical data, benefits and purchase guidance can be produced promptly. If assistance is needed to identify or resolve the discrepancy in the product data, contact the product data team for clarification.
M38x3 Thread Ring Gauge Go Right-Handed Metric ISO Fine Thread DIN 13, Hardened Gauge Steel - Metav IndustryLine
Take advantage of rapid go/no-go checks combined with DIN 13 conformity and hardened gauge steel for reliable inline acceptance testing; order the tool directly via Metav Werkzeuge or consult our experts for application advice. Thread ring gauge M38 x 3 — Go gauge, DIN 13, 6g (Metav IndustryLine) The Thread ring gauge M38 x 3 is a go gauge for metric ISO fine threads, right‑hand, designed for pass/fail inspection in production and quality control. Go gauge for M38 x 3 metric threads Hardened gauge steel construction DIN 13 tolerance class 6g Compact working weight 0.45 kg Fast, standards‑based pass/fail inspection for production lines The ring is manufactured to DIN 13 and tolerance class 6g, providing an unambiguous go/no‑go decision that speeds up routine checks and reduces subjective interpretation. As a dedicated go gauge, it eliminates the need for complex measurement setups during high‑volume runs: a quick trial fit confirms conformity to the specified M38 x 3 metric fine thread. This approach improves throughput and lowers the risk of downstream rejects by catching non‑conforming parts at the point of inspection. Robust material and wear resistance for long service life Made from hardened gauge steel, the gauge offers excellent wear resistance and dimensional stability under frequent use. The hardening process maintains thread form and calibration stability, so inspection intervals can be extended compared with untreated tools. At a working weight of 0.45 kg, the component balances sturdiness with easy handling on the shop floor, allowing operators to carry out repetitive checks without rapid fatigue or handling issues. Practical integration into quality workflows and traceability The compact design suits bench‑top control, incoming inspection and final assembly checks, enabling fast acceptance routines that dovetail with manufacturing quality plans. Using a standardised ring gauge based on DIN 13 simplifies documentation and supplier communication, because thread acceptance criteria are directly comparable across vendors. The gauge’s clear function as a go control also supports lean inspection strategies: fewer measurement steps, consistent decisions and improved repeatability in daily production monitoring. Contact Metav Werkzeuge today to discuss the Metav IndustryLine ring gauge and secure a practical, standards‑compliant solution for repeatable thread inspection on your production line Technical Data SKU: M315.138.8 GTIN: 4054469124827 Mass/Thread: M38 x 3 Weight: 0.45 kg Norm: DIN 13, 6g Facts Tolerance class: 6g Thread form: metric ISO fine thread, right‑hand Tariff number: 90173000 Special features Material: gauge steel, hardened Type: Go (acceptance) ring gauge Category: Gauges / Ring gauges Intended use: pass/fail inspection of threaded parts FAQ What is the intended use of this ring gauge? The ring gauge is intended as a go acceptance tool for M38 x 3 metric ISO fine threads and is used for quick pass/fail checks in production and inspection routines. Does the gauge conform to a recognised standard? Yes, the gauge is manufactured to DIN 13 with tolerance class 6g, making it suitable for standardised thread acceptance and supplier communication. What material is the gauge made from and why does that matter? Constructed from hardened gauge steel, the gauge offers enhanced wear resistance and dimensional stability, supporting longer intervals between maintenance and ensuring consistent inspection results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38×1 Thread Go Ring Right-Hand Gauge For Metric ISO Fine Threads DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Combining DIN 13 conformity, a 6g tolerance class and hardened gauge steel, this thread ring gauge delivers repeatable, wear‑resistant inspection for metric fine threads; order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M38 x 1 mm — hardened gauge steel, DIN 13 (Metav IndustryLine) A Thread ring gauge M38 x 1 for fast, standardised verification of right‑hand metric ISO fine threads in workshop and production environments Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g For metric ISO fine thread M38 x 1 Robust, repeatable pass/fail inspection Consistent inspection where it matters The ring is made from hardened gauge steel, offering high surface endurance that sustains dimensional integrity over prolonged use. Conformity to DIN 13 and the specified 6g tolerance class provides an objective reference for thread acceptance, reducing subjective judgements during routine checks. Using a dedicated thread ring for the M38 x 1 fine pitch ensures that thread gauges serve as a quick go/no‑go control; this saves time on the shop floor and supports consistent quality documentation. The robust material choice also limits wear, which in turn keeps recalibration intervals predictable and inspection results reproducible. Designed for practical workshop and production use With the nominal size M38 x 1 and the right‑hand thread form, this gauge is suited to assemblies and components that require fine‑pitch metric threads. The compact, single‑ring format is easy to handle during sequential checks and weighs about 0.56 kg, offering a balance between mass and ergonomics for repeated use. The tolerance class and standardised geometry make integration into existing inspection routines straightforward, whether used at receiving inspection, in‑process control or final inspection. The format supports rapid pass/fail decisions that keep throughput steady without sacrificing measurement reliability. Support for traceability and process reliability The gauge’s compliance with established standards provides a clear audit trail for quality systems and helps align production outputs with specification limits. As part of a broader metrology strategy, a certified, standardised thread ring reduces uncertainty in assembly fit and function; this is particularly important when fine‑pitch threads determine sealing, preload or alignment. Combined with Metav’s positioning as a quality filter for the European market, the ring gauge contributes to dependable inspection workflows and easier supplier validation for manufacturing operations. For availability and delivery options of Metav IndustryLine thread ring gauges, contact Metav Werkzeuge to confirm stock and documentation Technical data Article number: M315.238.4 GTIN: 4054469126456 Customs tariff number: 90173000 Facts Thread size: M38 Pitch: 1 mm Tolerance class: 6g Weight: 0.56 kg Special features Material: hardened gauge steel Standard: DIN 13 Thread form: metric ISO fine thread, right‑hand Category: Gauges (Lehren) FAQ What is the intended use of this ring gauge? The thread ring gauge M38 x 1 is intended for go/no‑go inspection of right‑hand metric ISO fine threads, providing a standardised acceptance check in production and inspection routines. Which standard does the gauge comply with? This ring gauge complies with DIN 13 and is manufactured to the 6g tolerance class for metric ISO threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure long service life and reproducible inspection results. How is the gauge used in a quality workflow? The gauge serves as a pass/fail reference for thread acceptance; incorporating it into in‑process or final inspection supports traceability and consistent conformity assessment. Can this gauge check other thread sizes or pitches? This specific instrument is sized for M38 x 1; other sizes or pitches require the corresponding ring gauge manufactured to the same standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M38×1.5mm Limit Thread Go Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Product data conflict detected: the item is simultaneously recorded as acceptable and as rejected, which prevents the generation of a reliable product description. This inconsistency in the product data creates significant challenges in ensuring accurate documentation and may lead to further complications in processing or reporting. To resolve this issue, it is essential to review the conflicting entries thoroughly and identify the correct status of the item. Please correct the inconsistent product data promptly to enable the generation of a full and reliable product specification. Addressing this conflict will ensure smoother operations and prevent potential delays in product-related workflows.
M39x1 Thread Gauge Ring Right-Hand ISO Fine Thread DIN 13, 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the hardened gauge‑steel construction, the DIN 13 tolerance class 6g and the M39×1 fine pitch to secure reproducible thread inspections; the no‑go function helps prevent non‑conforming parts reaching assembly. Order the ring gauge directly via Metav Werkzeuge or contact consultants for application advice. Thread ring gauge M39×1 mm — no‑go, DIN 13, 6g (Metav IndustryLine) The Thread ring gauge M39×1 mm (no‑go) is a hardened gauge‑steel inspection ring designed to verify right‑hand metric ISO fine threads in production and quality control. Hardened gauge‑steel construction Designed to DIN 13, tolerance class 6g No‑go verification for rejection control Right‑hand metric thread M39×1 Ensure thread conformity with a simple go/no‑go check A ring gauge that performs a decisive acceptance test brings clear benefits to production flow. The no‑go function provides a fast, objective check: if the ring does not enter the mating thread the part is rejected, preventing downstream rework and montage failures. Specified to DIN 13 with tolerance class 6g, the instrument matches common metric ISO fine‑thread tolerances and is suitable for inline inspection and final control stages, improving throughput by reducing subjective gauging decisions. Robust design for long service life and repeatability Made from hardened gauge steel, this inspection ring resists wear and maintains dimensional stability over many cycles, which preserves measurement certainty and reduces replacement frequency. The compact mass (approx. 0.52 kg) and right‑hand geometry reflect its intended use for standard metric fine‑thread series; the material choice and heat treatment ensure minimal profile wear, so periodic replacement intervals are extended and traceable inspection results remain reproducible. Fits into quality procedures and traceable workflows Integration into a production quality system is straightforward: the ring serves as a clear go/no‑go decision tool within acceptance plans and inspection reports. Using a standardised ring gauge specified by DIN 13 simplifies communication with suppliers and customers and supports compliance evidence during audits. For traceability, reference the SKU in procurement and inventory processes to ensure the correct gauge variant is used for the M39×1 fine‑pitch series. Contact Metav Werkzeuge for tailored advice on integrating the M39×1 no‑go ring gauge (SKU M315.239.4) into production inspections and to discuss supply or bulk requirements Technical Data Article number: M315.239.4 GTIN: 4054469126500 SKU: M315.239.4 Facts Thread: M39 × 1 mm Weight: 0.52 kg Tolerance class: 6g Tariff number: 90173000 eCl@ss: 21170214 Special features Material: hardened gauge steel Standard: DIN 13 Thread hand: right‑hand Function: no‑go (Ausschuss) ring gauge Brand: Metav IndustryLine FAQ What inspection task is the ring gauge designed for? The thread ring gauge M39×1 mm (no‑go) from Metav IndustryLine is intended for verification of right‑hand metric ISO fine threads and provides a clear rejection criterion for non‑conforming parts; refer to SKU M315.239.4 when ordering. Does the gauge match common thread standards? Yes — the ring gauge is manufactured to DIN 13 with tolerance class 6g, making it compatible with standard metric ISO fine‑thread specifications used in mechanical production. What material is the gauge made from and why does that matter? The ring is produced in hardened gauge steel; this material and heat treatment deliver耐 wear resistance and stable dimensions, which preserves inspection accuracy over repeated use of the M315.239.4 ring gauge. Is the gauge for left‑ or right‑hand threads? This ring is configured for right‑hand metric threads; ensure the M39×1 no‑go variant is matched to the thread hand of the parts under inspection. How should the gauge be used in a go/no‑go inspection routine? Use the no‑go ring gauge as the rejection check: if the ring enters the thread where prohibited, the component is non‑conforming. Record results against the inspection plan and reference the Metav IndustryLine product and SKU M315.239.4 in the report. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x1 Thread Go/No-Go Gauge Right-Hand Metric ISO Fine Pitch DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Take advantage of fast, repeatable thread inspection combined with hardened gauge steel durability and conformity to DIN 13, 6H for consistent production acceptance. Order this Go/No‑Go thread plug gauge directly via Metav Werkzeuge or contact our consultants for application advice. Go/No‑Go thread plug gauge M39 × 1 mm — right‑hand metric ISO fine‑thread verification (Metav IndustryLine) A Go/No‑Go thread plug gauge M39 × 1 mm for rapid acceptance testing of metric ISO fine threads in a right‑hand configuration, designed for routine shop‑floor and incoming inspection tasks. Go/No‑Go verification for M39 × 1 threads Hardened gauge steel, durable and wear‑resistant Conforms to DIN 13, tolerance class 6H Rapid, binary inspection that keeps production moving A dedicated Go/No‑Go plug provides an immediate pass/fail result, eliminating time‑consuming measurement routines where only conformity matters. The M39 × 1 mm size checks the critical pitch and major diameter positions for metric ISO fine threads, so parts either meet the specified tolerance or are identified for rework. This approach reduces inspection time, lowers throughput bottlenecks and supports lean production methods. Because the gauge enforces acceptance criteria, it also simplifies operator training and decision rules on the shop floor. Robust materials and standardised tolerances for long service life Constructed from hardened gauge steel, the plug resists wear during repeated engagement and maintains dimensional stability under normal use. The tolerance band is set to DIN 13, 6H, which corresponds to the common internal thread tolerance for metric ISO applications; this ensures compatibility with standard mating parts. The right‑hand configuration suits typical thread orientations found in components and assemblies. Together, material choice and standard conformity give repeatable performance and predictable maintenance intervals. Practical placement within quality management processes The plug gauge is intended for routine verification in incoming inspection, assembly checks and production sampling. Its binary nature supports statistical process control by supplying clear nonconformity counts rather than complex measurement records, which aids trend analysis and corrective action. Integration into a quality workflow lowers the cost per check and helps maintain traceable acceptance criteria across shifts. Metav’s position as a precision partner means the gauge arrives as part of a broader inspection strategy that emphasises reproducible results. Handling, storage and operator guidance for reliable results With a compact, robust form factor and a weight of 0.8 kg, the plug is easy to handle and fits standard gauge racks or inspection trays. To protect the critical thread form, keep the gauge clean and store it in a dry location away from impacts; avoid abrasive contact with hard particles. Regular visual checks for nicks and a scheduled exchange policy maintain accuracy over many cycles. For high‑volume environments, a documented inspection cadence preserves the gauge’s serviceable life and ensures consistent part quality. For dependable thread verification and application advice about Metav IndustryLine plug gauges, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and supply options. Technical Data Article number: M315.039.4 GTIN: 4054469123172 Manufacturer: Metav IndustryLine Weight: 0.8 kg Material: hardened gauge steel Norm: DIN 13, 6H Dimensions & Identifiers Thread size: M39 × 1 mm Tariff number: 90173000 eCl@ss: 21170235 SKU: M315.039.4 Features & Applications Right‑hand metric ISO fine thread Go/No‑Go plug gauge Category: Gauges / Plug gauges (Lehren) Condition: Good FAQ What thread size does this gauge check? The plug gauge checks M39 × 1 mm metric ISO fine threads, intended for right‑hand internal thread verification. Which tolerance class is applied by the gauge? The gauge is manufactured to DIN 13, 6H tolerance, matching common internal thread acceptance criteria for metric ISO threads. What material is the plug gauge made from? The device is made from hardened gauge steel, chosen for wear resistance and long service life during repetitive inspections. Is the gauge suitable for production line sampling? Yes, the Go/No‑Go plug gauge is designed for rapid pass/fail checks in production sampling, incoming inspection and assembly control. How should the gauge be stored to preserve accuracy? Store the plug in a clean, dry place away from impacts and contamination; implement a regular inspection and replacement routine to ensure reliable results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x1 Thread Ring Gauge Go Metric ISO Fine Pitch Right-Handed Hardened Gauge, DIN 13 6g - Metav IndustryLine
Take advantage of the precise DIN 13 6g tolerance and the durable hardened gauge steel construction to streamline thread inspection while reducing false rejects; order the gauge directly via Metav Werkzeuge or consult our specialists for specification support. Thread ring gauge M39 x 1 mm — Go gauge, DIN 13 (Metav IndustryLine) A Thread ring gauge M39 x 1 mm (Go) designed for rapid verification of metric ISO fine external threads in workshop and production environments DIN 13 6g tolerance for metric fine threads Hardened gauge steel for extended service life Right-hand M39 x 1 mm go gauge for efficient inspection Accuracy that matches production requirements The ring delivers conformity with DIN 13 and the 6g tolerance class, offering a clear go/no-go decision for fine-pitch metric threads. Used as a go gauge, it confirms that external threads meet the minimum dimensional requirements for assembly, reducing downstream rework. The thread form and pitch of M39 x 1 mm are explained in practical terms: the gauge checks the major diameter and thread flanks simultaneously, enabling fast acceptance testing on batches without the need for detailed metrology instruments. This focused function supports lean inspection routines and helps maintain production throughput while ensuring assembly reliability. Robust construction for frequent use Manufactured from hardened gauge steel, the ring is aimed at routine shop-floor inspection where durability matters. The material choice resists wear from repeated contact, preserving accuracy over many cycles and lowering total cost of ownership compared with untreated alternatives. At 0.7 kg the component is compact and easy to handle during serial checks, allowing technicians to carry out rapid part verification without auxiliary fixtures. The right-hand configuration suits standard metric assemblies, and the go-only design simplifies operator decisions, which can cut inspection time and reduce human error. Simple integration into quality processes As a dedicated inspection tool, the ring integrates directly into process control points for quick visual or tactile checks. When used as part of first-article inspections or incoming goods control, the gauge supports documented conformity sampling and contributes to traceable quality routines. The clear pass criterion provided by a go ring minimises interpretation, making it suitable for workshop staff and quality teams alike. Supplied under the Metav IndustryLine label, the item complements a broad metrology portfolio and fits workflows that value repeatability and straightforward measurement. Contact Metav Werkzeuge for specification advice or to secure prompt delivery of the Metav IndustryLine thread ring gauge and ensure consistent thread verification in production Technical data Article number: M315.139.4 GTIN: 4054469124841 Customs tariff number: 90173000 Weight: 0.7 kg Facts Thread size: M39 x 1 mm Tolerance class: 6g (DIN 13) Hand: right-hand Type: Go gauge Special features Material: hardened gauge steel Application: inspection of metric ISO fine external threads Category: thread ring gauge Brand: Metav IndustryLine FAQ What does the go designation mean for this gauge? The go designation indicates that the ring is a pass gauge; the Thread ring gauge M39 x 1 mm (Go) accepts threads that meet the minimum external dimensions and fit the specified DIN 13 6g tolerance Can this gauge be used for left-hand threads? No, this ring is manufactured for right-hand threads only; left-hand variants must be specified separately to match the part's thread direction How does the hardened material benefit workshop use? Hardened gauge steel increases wear resistance and preserves dimensional integrity during frequent checks, extending service life and maintaining reliable pass/no‑pass decisions Is this ring suitable for incoming inspection and production checks? Yes, the ring is intended for both incoming goods control and in‑process verification where quick, unequivocal acceptance testing of metric ISO fine threads is required Does the gauge comply with any standard? The ring conforms to DIN 13 with a 6g tolerance class for metric ISO fine threads Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x1.5 Limit Thread Go Gauge Metric ISO Fine Right-Hand Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of a tested measurement solution that combines robust, hardened gauge steel with conformity to DIN 13 / 6H for reproducible thread acceptance. The precise M39 × 1.5 right‑hand limit plug gauge ensures reliable go/no‑go assessments and supports consistent production quality — order directly via Metav Werkzeuge or contact our consultants for application advice. M39 x 1.5 mm limit thread plug gauge — metric ISO fine thread, right‑hand (Metav IndustryLine) The M39 x 1.5 mm limit thread plug gauge is a hardened checking gauge for right‑hand metric ISO fine threads, designed for production control and incoming inspection in mechanical workshops and assembly lines. Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6H Right‑hand M39 x 1.5 metric fine thread Supplied by Metav IndustryLine with traceability Precise go/no‑go control for metric fine threads A limit plug gauge is a simple but decisive tool for thread acceptance: the M39 x 1.5 plug confirms whether an internal thread falls within tolerance by a clear go/no‑go result. Built to the DIN 13 standard and specified 6H tolerance, the gauge provides a fast, objective check at the workbench or inspection station. Using a dedicated plug for fine threads reduces subjective judgement during sampling and helps to keep production rejects low, improving overall process efficiency. Durable construction that reduces downtime Manufactured from hardened gauge steel, the gauge resists wear under routine use and maintains dimensional stability over repeated inspections. The material choice and finish minimise surface abrasion and preserve the reference profile, extending service intervals and keeping calibrations stable. For typical workshop cycles a robust plug gauge like this contributes directly to lower rework rates and less machine downtime, because faulty threads are identified before assembly or shipping. Integrates into documented quality workflows The plug gauge is ready for use in statistical process control, first‑article inspection and incoming goods checks where conformity to metric ISO threads is required. The clear go/no‑go principle supports traceable decisions in audit situations and simplifies pass/fail documentation during batch releases. As a Metav IndustryLine measuring tool, it complements a calibrated inspection set and can be recorded in inspection logs to demonstrate compliance with internal quality plans and external standards. For reliable thread inspection and integration into quality processes, contact Metav Werkzeuge to discuss the Metav IndustryLine M39 x 1.5 limit thread plug gauge and receive tailored advice by phone or email Technical data SKU: M315.039.6 GTIN: 4054469123189 Material: Lehrenstahl, hardened Norm: DIN 13, 6H Thread designation: M39 x 1.5 Facts Weight: 0.8 kg Tariff number: 90173000 Special features Right‑hand metric ISO fine thread Go/no‑go check function Suitable for production control and incoming inspection Supplied by Metav IndustryLine FAQ What does the limit plug gauge check? The limit plug gauge performs a go/no‑go check of internal threads: the go end verifies acceptable size, the no‑go end detects oversize or out‑tolerance threads for the M39 × 1.5 specification. Which standard and tolerance does this gauge follow? This Metav IndustryLine plug gauge is manufactured to DIN 13 and specified for 6H tolerance to ensure compatibility with standard metric ISO fine threads. Is the gauge suitable for use in production sampling? Yes, the M39 × 1.5 limit thread plug gauge is intended for production control and incoming inspection, providing quick, repeatable pass/fail results for batch sampling. Can the gauge be used for left‑hand threads? No, this tool is made for right‑hand metric ISO fine threads; left‑hand checks require a corresponding left‑hand plug gauge. How is traceability identified for this gauge? The Metav IndustryLine plug gauge is supplied with manufacturer identification and can be recorded against inspection logs; the SKU M315.039.6 is used for inventory and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x1.5 Thread Ring Gauge ISO Metric Fine Right-Handed 6g Hardened Gauge Steel DIN 13 - Metav IndustryLine
The combination of a GO ring gauge M39 x 1.5 mm, DIN 13 tolerance class 6g and hard-wearing gauge steel ensures reliable thread acceptance checks and long service life; order directly via Metav Werkzeuge or consult the specialist team for application advice. Thread GO ring gauge M39 x 1.5 mm — Metric ISO fine thread, right-hand (Metav IndustryLine) The thread GO ring gauge M39 x 1.5 mm is designed for fast, unambiguous acceptance testing of external metric ISO fine threads in production and incoming inspection. GO ring gauge M39 x 1.5 mm Tolerance DIN 13, 6g Hardened gauge steel Right-hand metric ISO thread Ensure correct threads every time with repeatable GO/NO‑GO practice A dedicated GO ring gauge provides a simple, unambiguous test for whether an external thread meets the required profile and fit. Used as the first-line control in workshops and production lines, the gauge stops faulty parts from progressing into assembly. The clearly defined DIN 13 tolerance together with the 6g class gives a measurable acceptance criterion, reducing rework and minimising downstream failures. Robust construction for consistent measurement and long service life Manufactured from hardened gauge steel, this ring gauge resists wear and preserves the critical thread form over many inspection cycles. The material choice and heat treatment maintain dimensional stability so that a single gauge can serve repeated checks without significant drift. Such durability translates into lower total cost of ownership and dependable inspection results throughout production runs. Practical integration into quality-control workflows The compact, purpose-built design allows quick use at the control station or on the shop floor for inline testing. As a metric ISO right-hand thread gauge, it integrates directly into standard inspection processes and documentation. Traceability is supported by clear identification (SKU and GTIN) and the simple pass/fail criterion speeds inspection steps, helping to keep throughput high while protecting assembly quality. Contact Metav Werkzeuge to confirm suitability for specific thread fits and to secure the M39 GO ring gauge from the Metav IndustryLine range. Technical data SKU: M315.139.6 GTIN: 4054469124858 Mass/size: M39 x 1.5 mm Weight: 0.7 kg Facts Norm: DIN 13, 6g Type: GO ring gauge Thread: Metric ISO, right-hand Special features Material: gauge steel, hardened Category: Gauges / Measuring devices Tariff number: 90173000 FAQ What is the purpose of a GO ring gauge? The GO ring gauge checks whether an external thread fits the specified profile; the thread GO ring gauge M39 x 1.5 mm confirms acceptability according to the stated tolerance class. Which tolerance and standard does this gauge follow? This gauge is produced to DIN 13 and the fit corresponds to tolerance class 6g, providing a clear acceptance criterion for metric threads. Can the gauge be used on both right- and left-hand threads? The delivered instrument is for right-hand metric ISO threads; left-hand versions require a dedicated gauge. How does the material affect performance? Made from hardened gauge steel, the ring gauge retains thread form and resists wear, ensuring stable inspection results over many cycles. Is the gauge suitable for production-line checks? Yes, the compact GO ring gauge M39 x 1.5 mm is intended for fast inline and incoming inspections to protect assembly quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x1.5 Thread Ring Gauge Metric ISO Fine Right-Handed DIN 13, Hardened Gauge Steel - Metav IndustryLine
Precision verification of metric ISO fine threads is ensured by the combination of the M39 x 1.5 mm nominal size and the DIN 13 / 6g tolerance class, delivering repeatable acceptance checks on the shop floor. The hardened gauge steel construction provides long service life under frequent inspection cycles. Order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M39 x 1.5 mm — DIN 13, 6g, hardened gauge steel The Thread ring gauge M39 x 1.5 mm is a right-hand verification tool for metric ISO fine threads, designed for routine inspection and process control in production and quality departments Thread size M39 x 1.5, metric ISO fine DIN 13 tolerance class 6g Hardened gauge steel construction Right-hand verification ring Consistent acceptance criteria for reliable production flow The ring gauge provides a clear, objective pass/fail check against the DIN 13 specification and 6g tolerance class, which simplifies decision-making during final inspection. By applying a fixed, standardised acceptance geometry the gauge reduces process variation and supports inline quality control. The nominal diameter and pitch — M39 x 1.5 mm — match common fine-threaded components, enabling faster throughput and fewer ambiguous results in routine checks. Robust design that reduces downtime and maintenance Manufactured from hardened gauge steel, the gauge resists wear from repeated engagement and maintains thread profile integrity over many inspection cycles. The solid construction and manageable mass (0.52 kg) make handling straightforward during repetitive checks, while the right-hand orientation aligns with typical assembly directions. Durable materials mean fewer replacements and steadier long-term performance, contributing to lower operational interruptions and predictable maintenance scheduling. Traceability and workshop integration for quality systems Marked with a clear article identifier and GTIN, the gauge can be recorded in inspection logs and inventory systems to support traceability and audit requirements. Conformance to DIN 13 and the specified tolerance class facilitates communication with suppliers and production planners and ensures that inspection results are comparable across shifts and sites. The compact design fits standard inspection benches and can be integrated into existing process-control routines without additional tooling. For consistent thread inspection with Metav IndustryLine, contact Metav Werkzeuge in Emmerich for supply and expert advice on integrating this ring gauge into inspection routines Technical Data Article number: M315.239.6 GTIN: 4054469126517 SKU: M315.239.6 Tariff number: 90173000 Dimensions / Key figures Nominal diameter: 39 mm Thread pitch: 1.5 mm Weight: 0.52 kg Material & Features Material: hardened gauge steel Standard: DIN 13, tolerance class 6g Orientation: right-hand Application: verification of metric ISO fine threads FAQ What tolerance class does this ring gauge check? The ring gauge checks threads to DIN 13 with tolerance class 6g, providing a standardised acceptance criterion for metric ISO fine threads. Is the gauge suitable for production-line inspection? Yes, the hardened construction and standardised geometry make the gauge suitable for routine production and process-control inspections using the M39 x 1.5 mm specification. What is the article number for ordering and traceability? The article number is M315.239.6 and the GTIN is 4054469126517, enabling straightforward inventory and audit traceability. Which materials or components is this gauge intended for? The gauge is intended to verify metric ISO fine-threaded parts manufactured to the corresponding nominal size and pitch; it is a dimensional inspection tool rather than a machining instrument. How should the ring gauge be handled to preserve accuracy? Handle the gauge carefully, store it in a clean, dry place and avoid impacts; the hardened gauge steel construction enhances wear resistance but proper storage and handling extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com