Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M39x2 Gauge Plug For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Combining hardened gauge steel construction with the DIN 13 (6H) tolerance class, this limit thread plug gauge provides dependable, repeatable verification of ISO metric fine threads; order the gauge directly via Metav Werkzeuge or consult our specialists for application support. Metav IndustryLine limit thread plug gauge M39 x 2 mm – ISO metric fine thread, hardened A limit thread plug gauge M39 x 2 mm designed for rapid verification of right‑hand ISO metric fine threads in production and quality control. Hardened gauge steel for long life Conforms to DIN 13, tolerance 6H Right‑hand metric fine thread M39 x 2 Robust 0.8 kg handheld gauge Ensure thread conformity on every inspection The limit thread plug gauge is intended for acceptance testing of internal threads, offering a straightforward verification method that reduces uncertainty in production. Constructed from hardened gauge steel, the device resists wear and preserves the reference form over many cycles, which supports consistent pass/fail decisions during serial inspection. Compliance with DIN 13 and the 6H tolerance designation means the gauge represents an established reference for ISO metric fine threads, enabling clear conformity checks without elaborate measuring setups. Durable construction for reliable repeatability A robust, purpose‑made geometry and hardened material combine to deliver wear resistance and dimensional stability. The solid construction and mass of approximately 0.8 kg ensure a stable hand‑held feel and reduced susceptibility to accidental deformation, which in turn lowers the frequency of recalibration and unplanned rework. For production environments where reproducibility is critical, this design minimises downtime and supports a steady inspection throughput. Standards and traceability for quality assurance Built to the DIN 13 standard with a 6H tolerance class, the gauge provides a traceable reference suitable for incoming inspection and final acceptance. By integrating a clearly standardised limit gauge into the control plan, manufacturers create documented evidence of conformity that complements process control charts and batch records. The clear reference to ISO metric specification helps align shop‑floor practice with engineering drawings and quality audits, enhancing overall process transparency. Practical handling, storage and lifecycle considerations Maintenance requires only routine cleaning and dry storage to avoid corrosion; periodic visual inspection is sufficient to detect overt wear. The gauge’s hardened surface minimises profile loss, extending intervals between service checks. When stored correctly in a protected location, the tool remains a stable reference for extended periods, keeping calibration cycles predictable and manageable for the workshop. Contact Metav Werkzeuge today to discuss integrating the Metav IndustryLine M39 x 2 mm limit thread plug gauge into inspection routines or to request tailored purchasing and delivery information — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M315.039.7 GTIN: 4054469123196 Weight: 0.8 kg Thread size: M39 x 2 mm Thread direction: right‑hand Tariff number: 90173000 Facts Norm: DIN 13, tolerance 6H Material: hardened gauge steel Category: gauges / measuring pins Intended use: verification of ISO metric fine internal threads Special features Robust, hand‑held construction High wear resistance Suitable for production and incoming inspection Simple maintenance; visual wear checks recommended FAQ What is the primary application of this limit thread plug gauge? The limit thread plug gauge M39 x 2 mm from Metav IndustryLine is used for acceptance testing of right‑hand ISO metric fine internal threads to confirm conformity with drawing tolerances. Does the gauge comply with recognised standards? Yes, the gauge is manufactured to DIN 13 with the 6H tolerance class, providing a standardised reference for inspection routines. What material is the gauge made from and how does this affect longevity? Made from hardened gauge steel, the instrument offers enhanced wear resistance, which prolongs service life and reduces the need for frequent replacement. How should the gauge be maintained to preserve accuracy? Store the gauge dry and protected, clean after use and perform routine visual inspections; the hardened surface helps keep the reference form stable over many cycles. Which SKU identifies this specific gauge for ordering? The product is listed as SKU M315.039.7 and marketed under Metav IndustryLine for easy reference in procurement and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x2 Thread Ring Gauge, Right-Hand Metric ISO Fine Thread, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of DIN 13 compliance, hardened gauge steel construction and precise verification for metric fine threads — all supplied through Metav Werkzeuge for reliable workshop integration. Order the ring gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread Ring Gauge M39 x 2 mm — Metric ISO fine-thread ring gauge by Metav IndustryLine Thread Ring Gauge M39 x 2 mm is a hardened ring gauge designed for verification of metric ISO fine internal threads in production and inspection environments. Hardened gauge steel for long service life Conforms to DIN 13 with tolerance 6g Metric ISO fine thread M39 x 2 mm Right-hand thread verification Precise conformity for reliable pass/fail decisions The ring gauge is made from hardened gauge steel, providing a wear-resistant measuring face that preserves gauge geometry across repeated use. Conformity to DIN 13 with tolerance class 6g means the tool is calibrated to an established industrial reference, enabling unambiguous pass/fail decisions during incoming inspection or shop-floor checks. Using a purpose-made ring gauge reduces interpretation time compared with manual profile comparison and supports a streamlined quality control workflow. Fast verification that supports production efficiency Designed for quick functional checks, this gauge handles the verification of metric ISO fine threads with defined pitch and major diameter — listed as M39 x 2 mm. The compact, single-piece design allows rapid engagement with workpieces so that cycle times for routine checks remain short. As a result, measurement throughput increases without compromising traceability: the gauge provides an immediate mechanical verdict that complements dimensional sampling and documented inspection plans. Simple integration into inspection routines The ring gauge is suited to workshop and inspection benches where repeatable, robust checking is required. Its right-hand thread configuration aligns with the common thread orientation in many assemblies, and the hardened material keeps functional surfaces stable under normal handling. Paired with a clear inspection protocol and controlled storage, this gauge supports reproducible results and reduces rework caused by ambiguous thread assessment. Built for professional environments and traceable quality Specified for use where mechanical verification is required, the gauge is an appropriate tool for production control in mechanical engineering, toolmaking and maintenance departments. Supplied by Metav IndustryLine and backed by Metav Werkzeuge’s distribution and quality assurance, the gauge benefits from a supplier network experienced in precision metrology. This connection ensures continuity of supply and access to application advice for integration into established measurement routines. For personalised advice on integrating the Metav IndustryLine thread ring gauge into inspection procedures, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — technical consultants are available to assist with specification and application guidance Technical data Article number: M315.239.7 GTIN: 4054469126524 Category: Lehren / Gauges Numbers / Core technical data Thread size: M39 x 2 mm Tolerance class: 6g Standard: DIN 13 Mass: 0.52 kg Tariff number: 90173000 Special features / Versions Material: Hardened gauge steel Thread type: Metric ISO fine thread, right-hand Intended use: Verification of internal threads ECLASS: 21170214 FAQ What standard does the gauge comply with? The ring gauge complies with DIN 13 and is manufactured to the tolerance class 6g, ensuring it meets common industrial requirements for metric thread verification. For which thread type is this gauge intended? This tool is specified for metric ISO fine threads with the designation M39 x 2 mm, and is designed for right-hand internal thread checks. Is the gauge suitable for production shop-floor use? Yes. The hardened gauge steel construction and compact ring form make it suitable for regular shop-floor verification and routine acceptance checks. What identifiers are associated with this item? The product is listed under article number M315.239.7 and GTIN 4054469126524, supplied via Metav IndustryLine for traceable procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x3 Limit Thread Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Benefit from hardened gauge steel, precise DIN 13, 6H tolerance and compact weight for rapid pass/fail checks in production. Order the limit thread plug gauge M39 x 3 mm (SKU M315.039.8) directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug gauge M39 x 3 mm (right-hand) — Metav IndustryLine, DIN 13 6H The limit thread plug gauge M39 x 3 mm provides a fast Go/No‑Go check for metric ISO fine threads and is designed for use in workshop inspection, incoming goods control and production sampling. Limit gauge for M39 x 3 mm metric fine threads Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6H Consistent pass/fail control for production efficiency A limit thread plug gauge delivers immediate, unambiguous results: the Go end confirms conformance, the No‑Go end indicates an out‑of‑tolerance condition. Built from hardened gauge steel, this gauge resists wear and maintains its profile under repeated use, which reduces rework and the risk of accepting faulty parts. The specification DIN 13 with tolerance 6H aligns the tool with common engineering standards for metric ISO threads, enabling consistent quality control across batches. Using a tactile, mechanical gauge like this supports high throughput inspections where optical or digital systems would be unnecessarily complex. Practical design that supports traceable inspection workflows The compact, single‑piece construction and clear sizing of the plug make the tool straightforward to handle on the shop floor. For routine checks, the gauge speeds up decision-making and limits operator interpretation—a tactile pass/fail result is inherently straightforward. Where traceability or audit documentation is required, combine the gauge with a sampling plan or recording sheet to log in‑process checks; the robustness of the Metav IndustryLine gauge helps ensure that recorded checks remain valid over time. Reduced inspection time and fewer ambiguous results translate directly into improved production flow and lower inspection costs. Suitable applications and care to prolong service life This limit gauge is intended for metric ISO fine threads manufactured to M39 × 3 mm, right‑hand. Typical applications include incoming inspection of fasteners, process checks in thread forming and machined components, and spot checks during assembly. To maximise service life, store the tool dry, avoid impact on the thread profile and inspect the gauge periodically for wear or damage. If an organisational calibration policy is in place, consider including the gauge in routine verification intervals to maintain confidence in results. The compact mass and simple use make it a practical addition to standard inspection sets. For reliable thread inspection and consistent quality control, request the Metav IndustryLine M39 x 3 mm limit thread plug gauge (SKU M315.039.8) from Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for availability and specification support Technical data Article number: M315.039.8 GTIN: 4054469123202 Weight: 0.8 kg Material: hardened gauge steel Thread size: M39 x 3 mm Standard: DIN 13, 6H Tariff number: 90173000 Facts Weight: 0.8 kg Thread: M39 x 3 mm Tolerance class: 6H Standard: DIN 13 Special features Right‑hand metric ISO fine thread Limit (Go/No‑Go) plug gauge Robust single‑piece construction Suitable for workshop and incoming inspection FAQ What does a limit thread plug gauge check? A limit plug gauge checks whether an internal thread meets the sized limits; the Go end must enter while the No‑Go end must not, providing a clear pass/fail result for the M39 x 3 mm limit thread plug gauge. Which standard and tolerance does the gauge follow? The gauge is made to DIN 13 with a 6H tolerance class, matching common metric ISO thread specifications for consistent inspection criteria. Is the gauge suitable for both left‑ and right‑hand threads? This particular gauge is for right‑hand metric ISO fine threads; left‑hand threads require the corresponding left‑hand version. How should the gauge be stored and maintained? Store clean and dry, avoid impacts to the thread profile and include the gauge in periodic verification to preserve accuracy and service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x3 Thread Ring Gauge Go Right-Handed ISO Metric Fine Pitch DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
A high-precision thread ring gauge for M39 x 3 threads combines conformity to DIN 13, 6g with robust, hardened gauge steel for consistent, repeatable inspections. Purchase the gauge directly from Metav Werkzeuge or consult our specialists for guidance on integration into existing quality routines. Thread Ring Gauge M39 x 3 mm – DIN 13, 6g (Metav IndustryLine) A Thread Ring Gauge M39 x 3 mm designed for right-hand metric ISO fine-thread inspection in production and quality control environments Thread ring gauge M39 x 3 mm, DIN 13 6g Hardened gauge steel for durable accuracy Right-hand metric ISO fine-thread inspection Suitable for workshop and production control Ensure thread conformity in production The ring gauge verifies external threads against the normative DIN 13 tolerance class 6g, providing a clear pass/fail condition for M39 x 3 mm threads. As a dedicated inspection tool for metric ISO fine thread profiles, it removes ambiguity from go/no-go checks and shortens decision loops on the shop floor. The measurable conformity to the standard supports traceable quality control and helps avoid costly rework by identifying non-conforming parts before assembly. Durability that keeps inspections consistent Manufactured from hardened gauge steel, the gauge resists wear and maintains dimensional stability across repetitive use, sustaining repeatable inspection results over time. The material choice and heat treatment reduce the need for frequent replacement, supporting a reliable inspection workflow. For production settings where throughput and consistency matter, the combination of a normative tolerance class and robust construction delivers predictable performance and lower lifetime cost compared with soft or plated inspection aids. Streamline quality-control workflows and documentation Integrating the gauge into regular inspection plans simplifies routine checks and speeds up in-process sampling. The clear go/no-go functionality supports faster operator decisions and minimises downstream rejects, aligning with lean production principles. For specific application questions or to ensure the gauge fits an existing inspection plan, Metav Werkzeuge’s specialists are available to advise on best practice and complementary equipment, helping to embed the tool within a documented quality routine. For precise thread inspection and dependable production results, contact Metav Werkzeuge to discuss the M39 x 3 mm thread ring gauge and obtain tailored supply and application advice; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.239.8 GTIN: 4054469126531 Weight: 0.52 kg Material: gauge steel, hardened Thread size: M39 x 3 mm Standard: DIN 13, 6g Orientation: right-hand Facts Thread pitch: 3 mm Tariff number: 90173000 eClass: 21170214 Special features Application: metric ISO fine-thread inspection Category: Gauges / Lehren Manufacturer: Metav IndustryLine FAQ What tolerance class does the gauge check? The gauge verifies threads to the DIN 13 tolerance class 6g, providing a normative go/no-go result for M39 x 3 mm threads. Is the gauge suitable for production use? Yes; the hardened construction and normative specification make the gauge appropriate for routine production and workshop inspection tasks. Does this gauge inspect left-hand threads? This version is configured for right-hand threads; left-hand thread gauges are available as separate items. What material is the gauge made from? The gauge is produced from hardened gauge steel, chosen for wear resistance and dimensional stability under frequent use. Which manufacturer supplies this gauge? This article is supplied by Metav IndustryLine and listed under article number M315.239.8 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x3 Thread Ring Gauge, ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 / 6g conformity, hardened gauge steel and a compact M39 × 3 mm form for reliable, repeatable thread inspection; order the Thread Go Ring Gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread Go Ring Gauge M39 x 3 mm — Go ring gauge, DIN 13 (Metav IndustryLine) A Thread Go Ring Gauge M39 x 3 mm for fast verification of metric ISO fine threads in production and incoming‑inspection environments Hardened gauge steel construction Conforms to DIN 13 tolerance grade 6g For M39 × 3 mm metric ISO fine threads Right‑hand Go gauge for go/no‑go systems Ensure correct assembly with a clear Go check A Go ring gauge performs a straightforward, objective acceptance test: the rod or external thread must enter the ring without force to be accepted. Built to DIN 13 with tolerance 6g, this gauge provides a defined acceptance limit that supports consistent assembly and interchangeability across suppliers. The clear go/no‑go result reduces cycle time on control benches and prevents downstream faults, creating a measurable efficiency gain in both small workshops and serial production lines. Robust material reduces wear and downtime Manufactured from hardened gauge steel, the ring resists abrasion and preserves its measured geometry over prolonged use. The hardening treatment improves surface durability so recalibration intervals are extended and service interruptions are less frequent. For quality managers this means lower lifecycle cost and fewer rejected batches caused by worn inspection tools — a practical benefit that improves throughput without sacrificing measurement confidence. Suited for production inspection and shopfloor use Designed as a practical inspection instrument, the ring gauge is compact, easy to handle and intended for repeated manual checks at assembly stations and quality posts. Its right‑hand orientation and M39 × 3 mm specification match standard metric ISO fine threads, making it straightforward to integrate into existing inspection routines. Calibrated control points and a decisive physical test support rapid decisions on accept/reject, helping to maintain product consistency and minimise costly rework. Traceability and conformity in everyday quality control The ring gauge is produced for metrology applications where traceable conformance is required. Clear marking and the product’s Metav IndustryLine origin provide procurement with traceability and a known quality filter from Emmerich. Using standardised gauges like this one simplifies documentation of inspection practices and supports audits where demonstrable adherence to recognised norms is requested. Contact Metav Werkzeuge for delivery and specification advice on the Metav IndustryLine Thread Go Ring Gauge M39 x 3 mm — Metav’s specialists in Emmerich can advise on inspection workflows and supply details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.139.8 GTIN: 4054469124872 Weight: 0.7 kg Tariff number: 90173000 Facts Thread size: M39 × 3 mm Tolerance: DIN 13, 6g Type: Go (acceptance) ring gauge Special features Material: hardened gauge steel Right‑hand thread, metric ISO fine thread application Category: ring gauge / thread inspection tool Brand: Metav IndustryLine FAQ What does the Go ring gauge check in practice? The Go ring gauge verifies that the external thread fits within the maximum material limit defined for the M39 × 3 mm metric ISO fine thread; successful entry signifies acceptable form and major diameter according to the DIN 13, 6g requirement. Is the gauge suitable for production use on an assembly line? Yes, the hardened construction and the straightforward go/no‑go check make the ring gauge from Metav IndustryLine suitable for frequent shopfloor inspections and rapid acceptance testing. How is traceability provided for this gauge? The Metav IndustryLine ring gauge is supplied with clear identification (SKU M315.139.8 and GTIN) enabling traceable record keeping for quality management and audits. Can this gauge be used on both left‑ and right‑hand threads? This specific ring is manufactured for right‑hand threads; left‑hand threads require the corresponding left‑hand gauge. What does conformity to DIN 13, 6g mean for suppliers? Conformity to DIN 13, 6g defines the permissible geometric limits for the thread form and size, ensuring interchangeability between parts produced by different suppliers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x4 Go/No-Go Thread Plug Gauge Metrical ISO Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a compact, standards-based inspection tool that combines DIN 13 conformity, 6H tolerance class and hardened gauge steel for consistent thread verification; the M39 x 4 mm metric ISO limit plug gauge is built for repeatable go/no-go checks in production and inspection. Order the limit plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit plug gauge M39 x 4 mm — Metric ISO right‑hand thread gauge by Metav IndustryLine, hardened gauge steel, DIN 13 / 6H The Limit plug gauge M39 x 4 mm is a right‑hand, metric ISO thread master designed for fast, reliable go/no‑go verification of internal mating threads in workshop and production environments Hardened gauge steel for durability and wear resistance Conforms to DIN 13, tolerance class 6H Right‑hand metric ISO thread M39 x 4 Compact, repeatable go/no‑go inspection aid Ensure correct threads on the shop floor with standards‑based verification The primary benefit of a limit plug gauge lies in immediate, unambiguous inspection: the go/no‑go principle allows quick acceptance or rejection without interpretation. Manufactured in hardened gauge steel, this gauge resists wear and maintains the thread form, so pass/fail results remain reliable over many cycles. Compliance with DIN 13 and the 6H tolerance class provides a recognised reference for inspectors and quality systems, reducing disputes in incoming or outgoing inspection. This way, the measurement step becomes a fast, low‑effort quality gate that prevents faulty assemblies from progressing through production. Built to keep production moving — robustness and repeatability A gauge produced from hardened gauge steel delivers tangible operational benefits: consistent engagement geometry and a stable thread profile maintain reproducibility of results, which is crucial for batch control and first‑article inspections. The compact design and defined thread size M39 x 4 mm make the gauge easy to handle at the bench or on the shop floor; its mass of 0.84 kg ensures a solid, tactile feel during the check. Using a purpose‑made limit plug gauge reduces rework and downtime because inspection is immediate and clearly actionable — an economical choice for routine quality assurance. Integrating simple gauges into modern quality workflows Although inherently low‑tech, a go/no‑go thread limit plug integrates well with documented inspection routines and traceability schemes. Marking and recording which gauges were used for batches supports process audits and certification efforts. For users who require traceable verification, the material choice and DIN compliance are straightforward arguments in quality documentation. The gauge’s robust construction also minimises the need for frequent replacement, contributing to predictable stock and lower total cost of ownership in repetitive inspection tasks. For reliable thread verification from Metav IndustryLine, select the M39 x 4 mm limit plug gauge — contact Metav Werkzeuge for technical clarification or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.039 GTIN: 4054469123165 Weight: 0.84 kg Material: hardened gauge steel Dimension: M39 x 4 mm Standard: DIN 13 Tolerance class: 6H Tariff number: 90173000 Facts Right‑hand metric ISO thread Go/no‑go limit plug gauge Designed for thread verification Compact inspection tool for production Special features Hardened gauge steel for wear resistance Suitable for repeatable pass/fail checks Metav IndustryLine product Intended for workshop and production use FAQ What thread form and size does this gauge check? The limit plug gauge checks a right‑hand M39 x 4 mm metric ISO thread in accordance with DIN 13. Which tolerance class is represented by the gauge? The gauge corresponds to tolerance class 6H, providing a standard reference for acceptance criteria. What material is the gauge made from and why does it matter? Manufactured from hardened gauge steel, the gauge offers improved wear resistance and longer service life, ensuring consistent go/no‑go performance. Is this gauge suitable for routine production inspection? Yes — the limit plug gauge is designed for fast, repeatable pass/fail checks in workshop and production environments. How heavy is the gauge and does weight affect handling? The gauge weighs 0.84 kg, giving a stable feel during engagement which helps achieve consistent manual inspection results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x4 Thread Gauge, Right-Hand ISO Metric Pitch, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of a hardened gauge steel construction and conformity to DIN 13 with tolerance class 6g to ensure reliable pass/fail checks on M39×4 ISO threads; order directly via Metav Werkzeuge or consult our specialists for application advice. Thread gauge ring M39 x 4 mm (go) — ISO metric thread gauge, hardened gauge steel (Metav IndustryLine) Thread gauge ring M39 x 4 mm (go) is a precision inspection ring designed for verification of external ISO metric threads M39×4 with right-hand form, manufactured to DIN 13 tolerance class 6g. Go ring for M39 x 4 mm ISO metric threads Hardened gauge steel for long service life Manufactured to DIN 13, tolerance class 6g Reliable verification for production control This inspection ring provides a straightforward method for thread verification during incoming goods inspection and in-process quality checks. Manufactured to DIN 13 and tolerance class 6g, the ring gives a definite pass criterion: components that enter the ring comply with the specified thread form and pitch. The hardened construction minimises wear, preserving dimensional integrity over many cycles and supporting consistent, repeatable results in serial production environments. Designed for workshop durability and easy handling Made from hardened gauge steel, the ring combines durability with practical handling characteristics; its mass of 0.7 kg makes it stable in manual inspection without being cumbersome. The robust material choice reduces the need for frequent replacement, lowering total cost of ownership through extended service life. Clear thread designation and a compact form factor simplify storage and selection on the inspection bench, enabling faster throughput in routine testing. Fits quality systems and simplifies documentation The ring supports standardised quality procedures by delivering an unambiguous go/no-go criterion for M39×4 threads. Traceable identification via SKU M315.139 and GTIN supports inventory and quality records, while the compliance with DIN 13, 6g integrates easily into conformity assessments and inspection plans. For customers seeking reassurance from a reliable supplier, Metav IndustryLine provides a consistent supply chain and documented product specifications that streamline procurement and audit processes. For dependable thread inspection, request Metav IndustryLine gauges from Metav Werkzeuge—our Emmerich team will advise on selecting the correct ring for production requirements and provide further technical details if required. Technical Data Article number: M315.139 GTIN: 4054469124834 Weight: 0.7 kg Material: hardened gauge steel Standard: DIN 13, tolerance class 6g Thread: M39×4, right-hand Category: Thread gauges (Lehren) Facts Thread size: M39×4 Weight: 0.7 kg Tariff number: 90173000 SKU: M315.139 GTIN: 4054469124834 Special features Go gauge for external ISO metric threads Hardened gauge steel for wear resistance Manufactured to DIN 13, tolerance class 6g Suitable for routine pass/fail inspections Stable handling mass for bench inspection FAQ What thread size does this ring check? The ring checks M39×4 external ISO metric threads; the designation M39×4 is engraved on the ring for identification. Which tolerance and standard apply to this gauge? This go ring is manufactured to DIN 13 and tolerance class 6g, providing a clear pass criterion for the specified thread class. Is this a go or no‑go gauge? This product is a go ring; parts that enter the ring are acceptable for the specified M39×4 thread form. What material is the gauge made from and how durable is it? The gauge is made from hardened gauge steel, offering high wear resistance and long service life suitable for frequent inspection cycles. Can the gauge be used for left‑hand threads? No, the ring is for right‑hand ISO metric threads only; left‑hand threads require a dedicated left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39x4 Thread Ring Gauge Metrical ISO Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Hardened gauge steel and DIN 13 (6g) tolerance provide dependable verification of M39 x 4 metric ISO external threads; robust construction supports repeated quality checks and reduces uncertainty in production control. Order the gauge directly via Metav Werkzeuge or consult our technical team for application advice. Thread gauge ring M39 x 4 mm — DIN 13 (6g), hardened gauge steel (Metav IndustryLine) A Thread gauge ring M39 x 4 mm for fast verification of external metric ISO threads in workshop inspection and quality control Hardened gauge steel construction Conforms to DIN 13 tolerance 6g For M39 x 4 mm metric ISO threads Right-hand thread verification Ensure compliance with recognised thread standards The ring is manufactured to DIN 13 with tolerance class 6g, giving a clear, reproducible reference for external metric ISO threads. Conformity to this standard simplifies acceptance criteria in production and inspection environments, because the tolerance class defines the maximum permissible deviations for the external thread form. Using a standardised reference reduces interpretative variance between operators and speeds up go/no-go decisions during batch checks, improving throughput and traceability. Built for repeatable performance and long service life Made from hardened gauge steel, the component resists wear under frequent use and preserves its functional dimensions over time. Heat-treated surfaces maintain form stability during repeated engagement with screw threads, which means fewer replacements and consistent results across many inspection cycles. The robust material and precise machining reduce the risk of false rejects, supporting efficient quality assurance routines in metalworking and assembly operations. Practical application in production and workshop inspection Designed for direct inspection of external threads, the ring serves as a quick acceptance tool on the shop floor or in the quality lab. Intended for regular checks of externally threaded parts, it enables fast decisions on lot conformity and helps identify out-of-tolerance parts before further processing. The compact, easily storable form factor fits routine inspection workflows and integrates with standard quality-control procedures without requiring specialist equipment. Identification and traceability for inventory and documentation The gauge is supplied under article number M315.239 and is marked for clear identification to support inventory control and inspection records. Including a unique identifier simplifies documentation of inspection results and replacement scheduling. For companies that require product traceability in audits, the clear marking and industry-standard specification make it straightforward to record which instrument was used for a given batch inspection. Contact Metav Werkzeuge for delivery options and application guidance for the Metav IndustryLine thread gauge M315.239 Technical data Article number: M315.239 GTIN: 4054469126494 ECLASS: 21170214 Tariff number: 90173000 Numbers / Core technical data Thread: M39 x 4 mm Tolerance: 6g Standard: DIN 13 Materials / Special features Material: Hardened gauge steel Thread direction: Right-hand Category: Gauges / Thread ring Intended for: Metric ISO regular external thread inspection FAQ What thread size and type does this gauge verify? This thread gauge ring is specified for M39 x 4 mm external metric ISO threads and is manufactured to DIN 13 tolerance class 6g (Metav IndustryLine, article M315.239). Is the gauge suitable for frequent shop-floor use? Yes. The ring is produced from hardened gauge steel, which makes the Metav IndustryLine M315.239 durable and suitable for repeated engagement during routine inspections. Which standard does the gauge follow and what does the tolerance mean? The gauge complies with DIN 13; the 6g tolerance class indicates the permissible dimensional variation for the external thread, allowing quick conformity checks against the standard. How is the gauge identified for traceability? The product is listed as article number M315.239 with GTIN 4054469126494, enabling straightforward documentation and inventory tracking during quality processes. Can this ring be used for right- and left-hand threads? This particular ring is made for right-hand metric ISO regular threads (M39 x 4 mm) as specified for the Metav IndustryLine gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M39×2 Thread Ring Gauge Go Metric ISO Fine Pitch Right-Hand DIN 13, Hardened Gauge Steel - Metav IndustryLine
Take advantage of fast, unambiguous thread verification with a hardened gauge-steel construction and conformity to DIN 13 (6g) for reliable production checks; the M39 x 2 mm go gauge enables quick accept/reject decisions on metric ISO fine threads. Order directly through Metav Werkzeuge or consult the specialists for application advice. Thread Gauge Ring M39 x 2 mm (Go) – DIN 13, 6g – Metav IndustryLine The Thread Gauge Ring M39 x 2 mm is a hardened metric ISO fine-thread verification ring for right-hand threads, designed for rapid pass/fail inspection in production and quality control environments. DIN 13 tolerance 6g Hardened gauge steel construction Right-hand metric ISO fine thread Go gauge for fast accept/reject checks Reliable verification where tolerance matters A hardened thread gauge ring like this provides an immediate, unambiguous check of a component’s external thread. Conforming to DIN 13 with tolerance 6g, the ring functions as a Go gauge: if the ring engages correctly, the thread meets the specified limits. This direct method reduces measurement ambiguity compared with indirect inspection techniques, speeding up in-line quality control while keeping inspection criteria traceable and repeatable. Built for repeated use on the shop floor Manufactured from hardened gauge steel, the gauge ring offers long service life and stable geometry under normal handling. The compact, robust design supports frequent manipulation during production checks; its mass (approximately 0.7 kg) gives a reassuring feel in the hand and contributes to steady engagement during testing. The right-hand, metric ISO fine-thread geometry is tailored for M39 x 2 mm applications commonly found in mechanical assemblies and production runs. Integrates with routine quality workflows This ring is intended for straightforward accept/reject use in assembly, incoming inspection and machine-shop routines. The simple mechanical principle—pass or fail by engagement—minimises operator interpretation and accelerates decision-making. Traceability is supported through the article identifiers provided in the technical data, enabling consistent documentation in quality records and faster reconciliation during audits. Specify the Metav IndustryLine thread gauge for dependable thread inspection and contact Metav Werkzeuge in Emmerich for tailored procurement and technical guidance Technical data Article number: M315.139.7 GTIN: 4054469124865 Label: Gewinde-Lehrring M39 x 2 mm gut DIN 13, f. metr. ISO-Feingewinde, rechts Facts Weight: 0.7 kg Thread: M39 x 2 mm Tariff number: 90173000 Tolerance class: 6g Special features Hardened gauge steel DIN 13 standard compliance Right-hand metric ISO fine thread 'Go' gauge function for accept/reject inspection Category: Gauges (Lehren) FAQ What does a "Go" gauge ring check? A Go gauge ring verifies that an external metric ISO fine thread meets the lower limit of fit: the Thread Gauge Ring M39 x 2 mm (Go) should engage smoothly if the thread is within the specified DIN 13 (6g) tolerance. Can this ring be used for production checks on assemblies? Yes, the gauge ring is designed for rapid in-line accept/reject checks during production and assembly operations; the Metav IndustryLine ring allows quick verification without complex measuring equipment. What material is the ring made from and how durable is it? The ring is made from hardened gauge steel, giving the gauge ring robust wear resistance and stable geometry for repeated use; its weight (approx. 0.7 kg) aids handling and repeatable engagement. Is this ring suitable for left-hand threads? No, this item is specified for right-hand metric ISO fine threads; left-hand threads require a corresponding left-hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3x0.35 Thread Go/No-Go Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise conformity to DIN 13, 6H and the resilience of hardened gauge steel for repeatable thread inspection; the compact M3 x 0.35 size keeps handling quick and ergonomic. Order the gauge directly via Metav Werkzeuge or contact their consultants for technical advice. Limit thread plug gauge M3 x 0.35 (metric ISO fine thread, right-hand) — Metav IndustryLine A limit thread plug gauge M3 x 0.35 for fast inspection of metric ISO fine threads in right-hand form, intended for workshop quality control and production sampling. Conforms to DIN 13, 6H tolerances Made from hardened gauge steel for durability Compact and lightweight at 0.02 kg Suitable for metric ISO fine threads, right-hand Fast, standards-based verification that reduces rejects The primary advantage of this limit thread plug gauge is immediate, unambiguous verification of internal thread conformity to DIN 13, 6H. As a tactile inspection tool the plug gauge confirms acceptance or rejection without interpretation of readings, which speeds up sampling routines and reduces downstream rework. For production lines and inspection benches the ability to check a thread quickly supports throughput while maintaining documented quality standards; traceability is supported by the visible SKU and GTIN for inventory and audit processes. Robust construction for repeated in-process checks Built from hardened gauge steel, the gauge is designed to withstand frequent handling and contact with machined parts. The material choice and heat treatment ensure wear resistance, keeping the functional limits stable over many cycles and maintaining measurement confidence. Its compact form and low mass (approx. 0.02 kg) make it easy to integrate into inspection kits or carry between stations, while the right-hand configuration matches the majority of standard threaded components in precision engineering and small-part manufacture. Integration into quality workflows and documentation Marked and supplied as part of the Metav IndustryLine, the plug gauge supports routine quality control and incoming inspection tasks. Identification via the SKU and GTIN simplifies stock management and calibration scheduling; the clear norm reference (DIN 13, 6H) enables direct linkage to internal quality plans and sampling procedures. For shops aiming to standardise inspection across shifts, the gauge offers a low-effort method to ensure components meet metric ISO fine-thread requirements and to keep production moving with documented assurance. For consistent and documented thread checks, request the Metav IndustryLine limit thread plug gauge via Metav Werkzeuge or consult with the Metav team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number / SKU: M315.003.1 GTIN: 4054469122021 Thread size: M3 x 0.35 Weight: 0.02 kg Material: hardened gauge steel Norm: DIN 13, 6H Manufacturer: Metav IndustryLine Core technical data Thread pitch: 0.35 mm Mass: 0.02 kg Tariff code: 90173000 Special features Right-hand metric ISO fine thread Category: Gauge pins; Gauges Intended use: Inspection of internal threads Durable, hardened material for long service life FAQ What thread form and size does the gauge check? The limit thread plug gauge M3 x 0.35 checks right-hand metric ISO fine threads of M3 x 0.35, conforming to DIN 13, 6H. Is the gauge suitable for shop-floor sampling? Yes. The Metav IndustryLine plug gauge (SKU M315.003.1) is compact and sturdy, designed for frequent in-process and incoming inspection routines. What material and durability can be expected? This Metav IndustryLine gauge is made from hardened gauge steel, offering high wear resistance for sustained, repeatable use. How is the product identified for inventory and traceability? Identification is via SKU M315.003.1 and GTIN 4054469122021, which supports traceability and calibration records for quality management. Can the gauge be used for non-standard thread forms? The gauge is manufactured for metric ISO fine thread form and right-hand orientation; for non-standard threads a dedicated gauge is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3x0.35 Thread Plug Gauge Go Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the high repeatability of DIN 13 tolerance class 6g combined with hardened gauge steel for dependable thread acceptance at the point of production; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go thread ring gauge M3 x 0.35 — metric ISO fine thread, DIN 13, 6g (Metav IndustryLine) A Go thread ring gauge M3 x 0.35 for fast, repeatable verification of right‑hand metric ISO fine threads in production and incoming inspection. DIN 13 tolerance class 6g for metric ISO threads Hardened gauge steel for long service life Right‑hand fine thread M3 x 0.35 for ISO checks Compact acceptance gauge, workshop compatible Reliable conformity for routine thread inspection The gauge is manufactured to DIN 13 with tolerance 6g, providing a clear, normative pass criterion for metric fine threads. As a Go gauge, it confirms whether an internal thread meets the minimum material condition required to accept a mating fastener. Using a standardised acceptance ring simplifies go/no‑go decisions on the shop floor and removes subjectivity from visual checks. The normative basis and single‑function design reduce inspection time while maintaining traceability and repeatability in quality control processes. Robust construction that withstands everyday use Made from hardened gauge steel, this inspection ring is designed for frequent handling and retains its dimensional stability over extended use. The choice of hardened tool steel resists wear from repeated engagement with bolts and screws, which lowers the total cost of ownership by extending the interval between recalibration and replacement. The compact geometry and light mass make the gauge straightforward to position in fixtures or handheld checks, delivering consistent contact without excessive operator effort. Practical applications and process benefits Engineered for metric ISO fine threads, the ring serves in incoming goods inspection, in‑process checks and final assembly verification. Integrating such a gauge into a production cell or inspection station accelerates throughput: a definitive pass reduces downstream rework and a quick fail flags components for immediate correction. The ring replaces time‑consuming trial assemblies and supports lean inspection routines by providing a single, verifiable criterion for thread acceptability. Confidence through established standards and supply chain support Sourcing gauges from a specialist line ensures compatibility with existing inspection procedures and standards compliance across suppliers. The item’s compact acceptance function and adherence to DIN 13 make it suitable for machine shops, contract manufacturers and quality laboratories that require reliable go/no‑go assessment. Metav’s distribution from Emmerich acts as a quality filter for the European market, combining wide availability with technical support that helps integrate the gauge into established workflows. Contact Metav Werkzeuge to discuss suitability for specific components or to order the M3 Go ring gauge directly from Emmerich, including advice on storage and recalibration intervals Technical data SKU: M315.103.1 GTIN: 4054469123691 Weight: 0.01 kg Material: hardened gauge steel Norm: DIN 13, 6g Facts Thread size: M3 x 0.35 Handedness: right‑hand thread Category: gauges / inspection rings Tariff code: 90173000 Special features Function: Go (acceptance) gauge Intended for: metric ISO fine threads Durable hardened construction Compact, workshop compatible design FAQ What does the 6g tolerance mean for thread acceptance? The 6g tolerance class denotes the manufacturing tolerance for external threads per DIN 13; the Go thread ring gauge M3 x 0.35 verifies that a tapped hole or nut meets that minimum external‑thread requirement. Can this gauge be used in production assembly checks? Yes, the acceptance ring is suitable for routine assembly verification and in‑process checks to confirm that internal threads will accept standard mating screws. How durable is the hardened gauge steel construction? Hardened gauge steel offers high wear resistance for frequent use; the material choice ensures dimensional stability and extended service life under normal inspection cycles. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3×0.5 Limit Thread Go Gauge Metric ISO 6H Right-Hand Hardened Gauge Steel, DIN 13 - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, conformity to DIN 13 (tolerance 6H) and a compact M3 × 0.5 size to ensure fast, reproducible thread inspection. Order the limit plug gauge directly via Metav Werkzeuge or contact our consultants for application advice. M315.003 limit plug gauge — M3 × 0.5, right‑hand, hardened gauge steel The M315.003 limit plug gauge serves as a compact inspection tool for right‑hand metric ISO threads, designed for workshop and shop‑floor quality checks. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Right‑hand M3 × 0.5 metric thread Consistent thread conformity that reduces rework The limit plug gauge is manufactured to the metric ISO thread profile and DIN 13 tolerancing, with the internal class 6H specified for standard internal threads. This conformity makes the gauge an efficient instrument for quick pass/fail decisions during incoming inspection or inline checks, helping to reduce non‑conforming parts and downstream rework. The measurable benefit lies in repeatable decision criteria that integrate directly into quality control plans and production acceptance workflows. Durable construction for frequent use Made from hardened gauge steel, the gauge resists wear and maintains its profile under repeated handling, extending service intervals and lowering lifetime cost. At just 0.03 kg and in a compact M3 × 0.5 size, the tool is easy to handle, store and position in fixtures. The right‑hand orientation matches standard threaded features and supports efficient inspection routines without additional adapters, contributing to faster throughput on the shop floor. Practical application in the workshop and laboratory As a straightforward limit instrument, this plug gauge enables rapid verification of internal thread size and form, producing clear accept/reject outcomes without complex measurement devices. Use cases include batch sampling, final inspection of small components and quick checks at assembly stations. Combined with Metav’s quality assurance and distribution, the gauge fits both small workshops and larger procurement lists where reliable, standardised controls are required. For reliable workshop inspection tools, request the Metav IndustryLine M315.003 limit plug gauge from Metav Werkzeuge; our Emmerich‑based team is available for technical guidance by phone or email. Technical data Article number: M315.003 GTIN: 4054469122014 Material: gauge steel, hardened Norm: DIN 13, 6H Weight: 0.03 kg Numbers / Core technical data Thread: M3 × 0.5 Tolerance class: 6H Tariff code: 90173000 Mass: 0.03 kg Special features Right‑hand metric ISO thread Compact, workshop‑oriented format Category: Gauges / Measuring pins (Lehren / Messstifte) Intended for pass/fail thread inspection FAQ What is the primary use of this plug gauge? The M315.003 limit plug gauge is used for pass/fail inspection of internal metric threads, enabling rapid verification of thread conformity to DIN 13 with tolerance class 6H. Which thread size and hand does the gauge check? This gauge checks right‑hand M3 × 0.5 ISO metric threads and is intended for standard thread acceptance routines. What material is the gauge made from and why is that important? The gauge is made from hardened gauge steel to ensure long‑term wear resistance and stable inspection performance under frequent use. Can this gauge be used in serial production quality control? Yes, the compact design and clear accept/reject function make the gauge suitable for batch sampling, inline checks and final inspections in serial production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3×0.5 Thread Gauge Ring, Metric ISO Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Benefit from fast, repeatable verification of small metric threads with a hardened gauge steel ring manufactured to DIN 13 (6g); its compact form and low mass support efficient inline checks. Order the Thread ring gauge M3 x 0.5 mm directly via Metav Werkzeuge or consult our specialists if required. Thread ring gauge M3 x 0.5 mm — DIN 13 6g, hardened gauge steel (Metav IndustryLine) The Thread ring gauge M3 x 0.5 mm DIN 13 (6g) is a right-hand ring gauge for rapid go/no-go verification of metric ISO regular threads in production and quality control environments DIN 13, tolerance class 6g Hardened gauge steel construction Right-hand Go ring for metric ISO threads Lightweight 0.02 kg for easy handling Consistent verification for small metric threads A compact go ring gauge like this is purpose-built for fast, reliable acceptance testing of small metric threads. Manufactured to DIN 13 with tolerance class 6g, the gauge provides a clear, objective pass criterion for M3 threads and reduces subjective decision-making on the shop floor. The short, robust ring form minimises deformation during handling, which supports high repeatability in serial inspections and keeps throughput steady in production and incoming‑goods checks. Durable material and precise manufacturing for long service life Constructed from hardened gauge steel, the ring resists wear and preserves the critical thread profile over repeated use. Hardening and precise machining maintain profile fidelity so that inspection intervals can be planned rather than reactive. At a mass of 0.02 kg, the component is easy to manipulate at inspection benches or in dedicated gauges, while the material choice ensures dimensional stability and long-term value even under frequent handling. Seamless workshop integration and quality assurance benefits The ring gauge is designed for straightforward integration into existing inspection routines and fixtures, allowing quick checks without complex setup. Using a dedicated thread inspection tool simplifies traceability and documentation in quality processes and supports consistent acceptance criteria across shifts. Backed by Metav’s practical supply chain and quality filter in Emmerich, this gauge helps maintain a dependable flow from goods receipt to final assembly with fewer surprises. For assured M3 thread verification choose the Metav IndustryLine ring gauge — contact Metav Werkzeuge in Emmerich for tailored advice and sourcing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.103 SKU: M315.103 GTIN: 4054469123684 Thread size: M3 x 0.5 mm Standard: DIN 13 Tolerance class: 6g Material: hardened gauge steel Fit: Go (good) Handing: right-hand Weight: 0.02 kg Facts Nominal diameter: M3 Pitch: 0.5 mm Tolerance class: 6g Weight: 0.02 kg Harmonised tariff code: 90173000 Special features Go ring gauge for metric ISO regular threads Suitable for production and incoming‑goods inspection Compact, low-mass design for easy handling Category: Thread ring gauge / Gauges Application: Thread inspection and quality control FAQ What thread size does this gauge check? The Thread ring gauge M3 x 0.5 mm (Metav IndustryLine, SKU M315.103) checks M3 x 0.5 mm metric ISO regular threads. Is this a Go or No‑Go gauge? This item is a Go (good) ring gauge intended to verify that threads meet the acceptance limit for the 6g tolerance class. Which standard does the gauge comply with? The ring gauge is manufactured to DIN 13 and specified for tolerance class 6g for metric ISO regular threads. What material is the gauge made from? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability during repeated inspections. Can the gauge be used on the production line? Yes, the ring gauge is suitable for rapid inline checks and bench inspection routines in production and quality-control environments. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3–12 Limit Thread Plug Gauge Set, Metric ISO Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, in Case - Metav IndustryLine
Take advantage of a compact, ready-to-use inspection solution that combines hardened gauge steel, conformity with DIN 13, 6H, and a complete 7‑piece M3–M12 range for fast thread verification on the shop floor. Order the limit plug gauge set directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Limit thread plug gauge set (7-piece) M3–M12 – right‑hand, DIN 13, 6H The Limit thread plug gauge set (7-piece) M3–M12 provides a practical, shop‑ready kit for verifying metric ISO regular threads in production and incoming inspection, with sizes covering M3 to M12 for common assembly work Hardened gauge steel construction Conforms to DIN 13, 6H tolerance Set of 7 for M3–M12 threads Go/no‑go design for quick inspection Faster inspection with go/no‑go verification A compact set of 7 plugs replaces multiple individual checks by enabling immediate go/no‑go assessment of internal threads from M3 to M12. The design supports rapid decision‑making in incoming inspection and final checks: the operator either accepts the part with the “go” limit or segregates it instantly if the “no‑go” condition occurs. This reduces cycle time on the measuring bench, lowers throughput bottlenecks and keeps production flow consistent, making the set particularly effective where frequent, repeatable checks are required Durable materials that preserve accuracy over time Manufactured from hardened gauge steel, each plug is heat treated to resist wear and maintain dimensional stability under regular use. The gauges are produced to comply with DIN 13, 6H, which defines thread form and tolerance class for metric ISO threads; this ensures compatibility with standard fasteners and drawing specifications. The result is long‑term repeatability and fewer rejections due to measurement drift, so calibration intervals can be planned reliably and maintenance effort is reduced Practical for workshop inspection and process control Supplied as a matched set, the gauges allow quality technicians and machinists to establish a consistent inspection routine without constantly changing tools. The right‑hand thread design matches standard production threads and supports checks on components, castings and assemblies before final assembly. Using a purpose‑made inspection set improves traceability of acceptance decisions and helps embed a clear go/no‑go quality standard into daily workflows, supporting a pragmatic, audit‑ready process Contact Metav Werkzeuge today to confirm suitability for specific thread standards or production environments and to arrange a tailored quotation from Metav Werkzeuge's inspection specialists Technical data Article number: M315.000.N GTIN: 4054469121956 Weight: 0.35 kg Pieces per set: 7 Core data Thread sizes: M3, M4, M5, M6, M8, M10, M12 Standard: DIN 13, 6H Tariff number: 90173000 Special features Material: hardened gauge steel Right‑hand threads Limit plug gauge set (go/no‑go) Set format for production and inspection FAQ What sizes are included in the set? The set contains plug gauges for M3, M4, M5, M6, M8, M10 and M12, covering common metric ISO threaded bores Is the set suitable for production floor checks? Yes; the Limit thread plug gauge set (7-piece) M3–M12 is designed for shop‑floor use and rapid go/no‑go verification of metric ISO threads To which standard are the gauges manufactured? The gauges are produced to DIN 13, 6H, ensuring conformity with standard metric ISO thread tolerances What material are the plugs made from and why does it matter? Plugs are made of hardened gauge steel to resist wear and maintain dimensional stability for repeatable inspection results How many pieces are supplied in the kit and what is the article number? The kit comprises seven pieces and is listed as article number M315.000.N Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3–12 Thread Gauge Ring Set GO, Right-Hand, Hardened Gauge Steel, DIN 13 6g, in Case - Metav IndustryLine
Take advantage of a compact inspection solution that combines hardened gauge steel construction, DIN 13, 6g conformity and a practical M3–M12 range for rapid go/no‑go checks; order the set via Metav Werkzeuge or consult the Metav advisers for batch requirements and calibration options. Limit thread ring gauge set M3–M12 (GO) by Metav IndustryLine — hardened gauge steel, DIN 13, 6g The limit thread ring gauge set M3–M12 (GO) is a precision inspection kit for fast verification of metric ISO external threads in production and workshop quality control. Hardened gauge steel construction Set covers M3–M12 metric threads Manufactured to DIN 13, 6g tolerance Compact 7-piece GO ring gauge set Faster, reliable go/no‑go decisions on the shop floor A purpose‑built GO gauge delivers an immediate binary result: pass or fail. By using a limit ring gauge set conforming to DIN 13, 6g, inspection cycles are shortened and operator variation is reduced. This translates into smoother production flow and fewer rework loops, because parts that pass the GO check meet the specified maximum material condition for the external thread. The compact design and grouped sizes allow rapid sequential checks without tool changes, supporting lean inspection routines and keeping throughput steady. Built for durability and repeatable accuracy Constructed from hardened gauge steel, the gauges resist wear and preserve their measuring edge under frequent use, which sustains measurement confidence over time. The material choice and heat treatment provide a stable contact surface, so the set maintains a consistent fit with mating threads and limits measurement drift. For production environments where abrasion and repeated handling are typical, this robustness reduces replacement frequency and supports predictable maintenance cycles. Practical size range for general engineering applications Covering the common metric thread sizes from M3 to M12, the seven gauges in the set match typical fastener ranges in machinery, fixtures and small assemblies. The collection is therefore suitable for general workshop quality control as well as first‑article inspection in smaller production runs. Each gauge is intended to verify external metric ISO standard threads with right‑hand orientation, so the set integrates straightforwardly into established inspection protocols without additional tooling. For enquiries about volume supply, calibration certificates or tailored sets, contact Metav Werkzeuge in Emmerich — their specialists can advise on lead times and delivery options to match production needs. Technical Data Article number: M315.100.N GTIN: 4061905047831 Manufacturer: Metav IndustryLine Material: Hardened gauge steel Standard: DIN 13, 6g Facts Sizes: M3, 4, 5, 6, 8, 10, 12 Pieces per set: 7 Weight: 0.49 kg Tariff number: 90173000 Special features GO (limit) ring gauges for external threads Right‑hand metric ISO standard threads Compact set for quick sequential checks Hardened construction for wear resistance FAQ What is checked with this gauge set and which thread form is intended? The Limit thread ring gauge set M3–M12 (GO) by Metav IndustryLine is intended to verify external metric ISO threads using GO limit gauges for right‑hand threads; it confirms whether an external thread meets the maximum material condition. Does the set comply with recognised standards? Yes — the gauges are made to DIN 13, 6g, ensuring compatibility with standard engineering tolerances and straightforward integration into quality assurance procedures. Which materials are the gauges made from and how does this affect service life? The set is manufactured from hardened gauge steel, which offers high wear resistance and consistent contact geometry, prolonging service life in regular inspection tasks. Is this set suitable for both workshop checks and incoming inspection? The 7‑piece range (M3–M12) covers common fastener sizes, making the set suitable for routine workshop checks and small to medium scope incoming inspections where metric ISO threads are used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3–M12 Thread Go/No-Go Ring Gauge Metric ISO 6g Right-Hand Hardened Gauge Steel Set, DIN 13 - Metav IndustryLine
Take advantage of precise, standards‑compliant inspection with hardened gauge steel and DIN 13, 6g conformity to reduce scrap and speed up incoming inspection; order the set directly via Metav Werkzeuge or contact their consultants for application advice. Thread No‑Go Ring Gauge Set — Metric M3–M12, hardened gauge steel (Metav IndustryLine) The Thread No‑Go Ring Gauge Set is a compact, workshop-ready solution for fast rejection testing of right‑hand metric ISO threads in production and quality control. Hardened gauge steel for long life Conforms to DIN 13, 6g thread standard Covers common metric sizes M3–M12 Set format for efficient routine inspection Fast, standards‑based thread inspection that protects yield The set delivers a clear go/no‑go decision by verifying the rejection limit of metric ISO threads according to DIN 13, 6g. Intended for quick in‑process and incoming checks, the gauges provide a repeatable binary result that eliminates subjective judgment and reduces downstream rework. With coverage across M3–M12 sizes, the collection addresses the most frequent thread dimensions encountered in small‑part manufacture and assembly, helping to maintain production throughput while safeguarding component compatibility. Durable construction for consistent measurement over time Manufactured from hardened gauge steel, each ring is dimensionally stable and resistant to wear, which preserves the limiting geometry required for reliable rejection testing. The robust material minimises the need for frequent replacement and supports consistent inspection intervals in busy inspection routines. The compact, tool‑grade finish reduces the risk of burrs or contact damage, ensuring that the no‑go criterion remains strict and reproducible across repeated cycles. Practical set design for workshop integration and traceable checks Supplied as a practical set for right‑hand metric threads, the gauges are intended for use at inspection benches, assembly stations or incoming inspection points where rapid decisions are essential. The simple, tactile check supports lean quality workflows: reject out‑of‑tolerance parts immediately and document results for traceability. Combined with Metav’s position as a European precision partner, the collection offers a pragmatic balance of durability and conformity that suits small series and production environments alike. Contact Metav Werkzeuge to request the Metav IndustryLine no‑go ring gauge set (SKU M315.200) and ensure robust, standards‑based thread inspection in your operation Technical data SKU: M315.200 GTIN: 4054469125299 Tariff number: 90173000 Facts Sizes: M3, M4, M5, M6, M8, M10, M12 Piece count per set: 7 Standard: DIN 13, 6g Special features Material: hardened gauge steel Right‑hand metric ISO threads Type: no‑go ring gauges for rejection testing Set format for production and incoming inspection FAQ What is the purpose of these gauges? The Thread No‑Go Ring Gauge Set is designed to perform pass/fail rejection checks on right‑hand metric ISO threads, ensuring threads that exceed tolerance are identified and removed from production. Which thread sizes are included? The set covers the most commonly used metric sizes from M3 to M12, making it suitable for a wide range of small‑part assemblies and incoming inspection tasks. Are the gauges standardised? Yes, the gauges conform to DIN 13, 6g, so measurements align with accepted thread tolerancing for consistent quality control. What material are the gauges made from? Each ring is made from hardened gauge steel to provide wear resistance and long‑term dimensional stability during repetitive inspection. How does the set support traceability? Using the set for routine rejection checks allows inspection results to be recorded as part of quality documentation; the SKU M315.200 and GTIN facilitate inventory and traceability tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M3–M12 Thread Go/No-Go Ring Gauge Set 14‑Piece (Good & Reject, 7 Each), Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of DIN 13 conformity and hardened gauge steel for reliable, repeatable thread checks; the set combines GO and NOGO rings across metric sizes to simplify inline and incoming inspection. Order directly via Metav Werkzeuge or consult our specialists for integration into existing quality procedures. Thread Ring Gauge Set — 14-piece M3–M12, GO/NOGO, Metav IndustryLine A Thread Ring Gauge Set designed for fast pass/fail verification of metric ISO threads in production and inspection environments. 14-piece set with GO / NOGO configuration Hardened gauge steel for long service life Conforms to DIN 13, tolerance class 6g Covers metric sizes M3–M12 Ensure compliant, objective thread inspection every time The ring gauges provide a straightforward, standards-based method for thread verification. Manufactured to DIN 13 with tolerance class 6g, the rings establish a clear acceptance criterion: the GO ring must enter the thread, while the NOGO ring must not. This binary result removes subjective judgements and speeds up control loops on the shop floor. The combination of normative specification and simple use supports consistent quality documentation and efficient sampling strategies in serial production. Built to resist wear and retain accuracy Made from hardened gauge steel, the rings are dimensionally stable and resistant to the typical wear mechanisms of daily inspection work. The material choice reduces the frequency of replacement and preserves the measuring edge under repeated engagement. Robust construction therefore contributes to lower long‑term inspection costs and reliable measurement outcomes, making these gauges suitable for continuous use in workshop and production environments where traceable, repeatable checks are required. Practical set composition for routine quality control The set contains 14 pieces arranged as GO and NOGO rings for the metric thread sizes M3–M12, covering common small to medium fasteners used across mechanical engineering and assembly. This configuration enables rapid pass/fail checks at incoming inspection, during assembly and for final inspections without the need for elaborate measuring equipment. The compact scope of sizes supports a broad range of threaded components while keeping inventory and handling effort to a minimum. For DIN‑compliant and durable thread inspection tools from Metav IndustryLine, contact Metav Werkzeuge to order this gauge set or to discuss which configuration best fits production needs. Technical data SKU: M315.101 GTIN: 4054469151618 Weight: 0.44 kg Pieces per set: 14 Facts Thread sizes: M3, M4, M5, M6, M8, M10, M12 Tolerance class: 6g Number of GO rings: 7 Number of NOGO rings: 7 Special features Material: Gauge steel, hardened Standard: DIN 13 Configuration: GO and NOGO rings for pass/fail control Suitable for metric ISO threads FAQ What sizes are included in the set? The set includes ring gauges for M3, M4, M5, M6, M8, M10 and M12; arranged as GO and NOGO pairs in the 14‑piece configuration. How is a pass or fail determined with these gauges? A component passes when the GO ring engages correctly and fails if the NOGO ring enters; the Metav IndustryLine Thread Ring Gauge Set (SKU M315.101) uses this established pass/fail principle for fast verification. Which standard do the rings comply with? The rings are manufactured to DIN 13 with tolerance class 6g, ensuring conformity with common metric ISO thread requirements. What is the material and why does it matter? Rings are produced from hardened gauge steel, which provides wear resistance and dimensional stability for repeated inspection tasks. Is the set suitable for production and incoming inspection? Yes, the 14‑piece GO/NOGO configuration is intended for rapid, objective checks in both production and incoming inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M4 x 0.35 mm Thread Ring Gauge, Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Benefit from a combination of DIN 13 conformity, hardened gauge steel construction and GO‑class checking for fast, reproducible thread inspection; the gauge helps reduce inspection time while maintaining production quality. Order the gauge directly via Metav Werkzeuge or consult our specialists for application support. Thread ring gauge M4 x 0.35 mm (GO) — DIN 13, hardened gauge steel — Metav IndustryLine Thread ring gauge M4 x 0.35 mm (GO) is a hardened ring gauge for verifying metric ISO fine threads to DIN 13, designed for routine incoming inspection and process control in industrial environments. Thread size M4 x 0.35 for ISO fine threads GO class gauge for functional inspection Hardened gauge steel for wear resistance Conforms to DIN 13, tolerance 6g Consistent acceptance criteria for fast inline checks A GO ring gauge provides a clear functional decision: parts that pass the gauge meet the minimum acceptance profile. The M4 x 0.35 GO gauge is manufactured to DIN 13 with a 6g tolerance, which ensures compatibility with standard metric fine threads. Integrating a dedicated limit ring into inspection routines reduces subjective assessment and shortens cycle times, so quality decisions become immediate and reproducible on the shop floor. Built for durability and stable measuring performance Constructed from hardened gauge steel, the instrument withstands frequent handling and maintains its profile over many inspection cycles. The low mass (approx. 0.01 kg) and compact form factor simplify positioning and make repetitive checks less fatiguing for operators. The robust material choice translates into longer service life and lower lifetime cost compared with softer inspection aids, supporting reliable pass/fail results under continuous use. Streamlined application across production and incoming inspection This ring gauge is suited to a broad range of applications where fine-pitch metric threads are common: fastener production, precision assemblies, and component incoming inspection. By using a dedicated thread limit gauge, process engineers gain a binary inspection step that integrates easily into assembly jigs or inspection benches, accelerating throughput while safeguarding functional fit for mating parts. Traceability, standards and supply continuity Manufactured to DIN 13 and supplied with clear identification, the gauge supports documented inspection routines and audit trails. The compact specification and recognised standard make it straightforward to reference the instrument in quality plans and inspection worksheets. Backing from a seasoned supplier ensures replenishment and consistent specification across batches, which is vital for maintaining measurement consistency over time. For reliable thread gauging, specify the Metav IndustryLine M4 GO ring gauge and contact Metav Werkzeuge in Emmerich for delivery and technical advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M315.104.1 GTIN: 4054469123738 Weight: 0.01 kg Material: hardened gauge steel Facts Thread size: M4 x 0.35 Tolerance / class: 6g Tariff code: 90173000 Conformity: DIN 13 Special features Type: GO ring gauge Thread direction: right-hand Category: Thread gauges Intended use: Metric ISO fine threads FAQ What thread size does this gauge check? The ring checks M4 x 0.35 metric fine threads and is specified for the corresponding ISO fine‑pitch profile. Is this a GO or NOGO gauge? This item is a GO gauge; the limit is intended to verify that a thread meets the minimum acceptable profile. What tolerance/class does the gauge represent? The gauge is produced to a 6g tolerance in accordance with DIN 13, which matches common metric ISO fine-thread requirements. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, giving high wear resistance and stable form retention for repeated inspection cycles. Can this gauge be used for production control on small components? Yes, the compact GO ring is suitable for routine production and incoming inspection of small threaded parts where fine-pitch M4 threads are used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M4 x 0.35 Thread Go/No-Go Ring Gauge, Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 tolerance 6g, hardened gauge‑steel construction, and the fine M4 x 0.35 thread form to speed up incoming inspection and reduce production rejects; order the required gauges directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Thread ring gauge M4 x 0.35 mm (DIN 13, 6g) — Hardened gauge steel — Metav IndustryLine The Thread ring gauge M4 x 0.35 mm (DIN 13, 6g) is a hardened gauge‑steel inspection ring for checking right‑hand metric ISO fine threads in production and quality control. Hardened gauge steel construction Conforms to DIN 13 tolerance 6g M4 x 0.35 metric fine thread Right‑hand, reject (no‑go) function Quick assurance of thread conformity on the line The ring gauge provides a rapid, binary check of thread conformity based on the DIN 13 form and the 6g tolerance class, enabling immediate acceptance or rejection of parts. Designed as a dedicated inspection tool, the ring verifies pitch and major diameter together with flank form so that threaded components either pass the inspection or are clearly identified as non‑conforming. This check replaces time‑consuming measurements for many routine inspections, improving throughput and reducing the risk of defective assemblies entering the workflow. Robust material and long service life for repeated checks Manufactured from hardened gauge steel, the gauge resists wear under repeated use and maintains dimensional stability over many inspection cycles. The hardened surface reduces abrasion from repeated engagement with threaded parts, which keeps the gauge within specification longer and lowers lifecycle costs compared with untreated gauges. Traceable identification (SKU M315.204.1) and the compact mass of 0.01 kg make the tool easy to handle at the inspection station while preserving durability under shop‑floor conditions. Practical operation and what it verifies This inspection ring is intended for right‑hand metric ISO fine threads with a pitch of 0.35 mm and a nominal size of M4. Functioning as a reject (no‑go) instrument, it confirms whether a thread exceeds permissible limits: parts that fully engage the ring are typically acceptable, while a lack of proper engagement indicates an out‑of‑tolerance condition. Using the gauge shortens decision time in standard quality routines and lowers scrap by enabling consistent, repeatable checks without complex measurement setups. Reliability from a specialist supplier Sourced under the Metav IndustryLine, the gauge benefits from Metav’s quality filter in Emmerich and their broad industrial experience. Metav supplies are geared to the needs of workshops and production lines, offering a dependable logistics chain and product traceability that support uninterrupted manufacturing. The combination of standard conformity, wear‑resistant material and clear function makes this ring gauge a practical choice for inspection processes in metalworking and assembly environments. Contact Metav Werkzeuge for procurement and technical consultation on Metav IndustryLine thread gauges and ensure reliable, standard‑conforming inspection in your production process Technical Data Article number: M315.204.1 GTIN: 4054469125404 Dimension: M4 x 0.35 mm Material: Hardened gauge steel Standard: DIN 13, 6g Weight: 0.01 kg Facts Thread size: M4 Pitch: 0.35 mm Tolerance class: 6g Tariff code: 90173000 Special features Right‑hand thread For metric ISO fine thread Reject (no‑go) gauge function Category: Thread gauges (inspection rings) FAQ What does the ring gauge check on an M4 x 0.35 thread? The ring gauge checks combined geometric limits of the M4 x 0.35 thread in the 6g tolerance class; it functions as a pass/reject inspection for pitch and major‑diameter conformity. Is the gauge suitable for left‑hand threads? No, this instrument is manufactured for right‑hand metric ISO fine threads and is specified for right‑hand use. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel to ensure wear resistance and dimensional stability during repeated inspections of threaded parts. How does the DIN 13, 6g designation affect inspection criteria? DIN 13 with tolerance class 6g defines the permissible geometric envelope for the thread; the gauge is produced to that class so inspection decisions directly reference the standard limits. Can the Metav IndustryLine gauge be used in production sampling? Yes, the Metav IndustryLine ring gauge is designed for routine sampling and line‑side checks to provide quick, standard‑based decisions on batch conformity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M4 x 0.7 mm Thread Ring Gauge, Go, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of fast, repeatable thread inspection combined with DIN 13 compliance and a hardened gauge steel body for reliable production control; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. M315.104 Thread Ring Gauge M4 x 0.7 (Go) — hardened gauge steel, DIN 13, 6g A Thread Ring Gauge M4 x 0.7 (Go) designed for rapid verification of metric ISO threads in production and quality inspections, right‑hand configuration for standard assemblies DIN 13, tolerance class 6g Hardened gauge steel construction For metric ISO threads M4 x 0.7 Right‑hand Go ring gauge Fast, repeatable thread checks that keep production moving The Go gauge enables immediate pass/fail assessment of internal threads, shortening inspection cycles and reducing machine downtime. Designed for quick tactile verification, the ring confirms that an internal thread meets the M4 x 0.7 nominal geometry and the 6g tolerance band defined by DIN 13. This direct-measure approach eliminates the need for complex measurement setups when a binary conformity decision is sufficient, improving throughput in batch inspections and incoming goods control. Durable construction for sustained accuracy and low lifecycle costs Manufactured from hardened gauge steel, the ring resists wear during frequent use and maintains a stable checking surface over time. The robust material choice reduces the frequency of replacement and keeps maintenance effort low, which is particularly advantageous for high-volume production or workshop environments where many routine checks are performed daily. The lightweight format (approx. 0.02 kg) supports easy handling and fast interchange between stations without compromising stiffness at this nominal size. Clear conformity to standards for seamless quality assurance Compliance with DIN 13 and the specified 6g tolerance class ensures compatibility with international metric ISO thread requirements and simplifies documentation within quality systems. As a dedicated Go ring gauge, this tool checks that internal threads are within the lower acceptance limit—an essential step in a traceable inspection workflow where only correctly formed threads may proceed to assembly or delivery. The right‑hand configuration matches the common thread direction used in standard fastenings. Contact Metav Werkzeuge today to equip production with the M315.104 Go thread ring gauge and request tailored advice from our Emmerich‑based specialists Technical Data Article number: M315.104 GTIN: 4054469123721 Manufacturer: Metav IndustryLine Material: hardened gauge steel Norm: DIN 13 Facts Nominal diameter: 4 mm Thread pitch: 0.7 mm Weight: 0.02 kg Tolerance class: 6g Special features Go (good) ring gauge Right‑hand thread For metric ISO threads Category: thread ring gauge Customs tariff number: 90173000 FAQ What does the Go designation mean for this ring gauge? The Go designation indicates that the ring permits a gauge to pass if the internal thread is within the lower acceptance limit; the M315.104 Go ring gauge confirms that an M4 x 0.7 internal thread meets the required fit. Which tolerance and standard does this gauge follow? This ring gauge is made to DIN 13 with tolerance class 6g, providing conformity with common metric ISO thread specifications for quality control. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the M315.104 offers high wear resistance and retains checking accuracy under frequent use. Is this gauge suitable for production line inspections? Yes, the M315.104 Go gauge is intended for rapid, repeatable checks in production and incoming inspection where binary pass/fail verification is required. Does the gauge check right‑hand threads or left‑hand threads? This particular ring is configured for right‑hand metric ISO threads and is specified for M4 x 0.7 applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40 x 1 mm Thread Go Ring Gauge Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Ensure fast, repeatable thread acceptance checks by combining a hardened gauge steel body with metric DIN 13, tolerance class 6g conformity; secure clear go/no-go decisions on M40 × 1 mm fine threads and order directly via Metav Werkzeuge or consult our specialists for further application advice. Thread ring gauge M40 × 1 mm (DIN 13, 6g) — Metav IndustryLine The Thread Ring Gauge M40 × 1 mm is a right‑hand, metric ISO fine‑thread no‑go ring designed for rapid pass/fail inspection of M40 × 1 mm threads in production and quality control. Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g Metric fine thread M40 × 1 mm, right-hand Compact, 0.7 kg for easy handling Clear acceptance criteria for fine threads The M40 × 1 mm no‑go ring gauge is intended for decisive, tactile inspection of metric ISO fine threads. Built to DIN 13 with tolerance class 6g, it delivers an objectively measurable reference: a correct thread should not accept the no‑go ring. This makes batch acceptance or rejection quick and unambiguous, reducing subjective interpretation and helping to avoid costly field failures. The straightforward pass/fail result supports lean quality processes and downstream productivity. Durable design for repetitive use Manufactured from gauge steel and delivered hardened, the gauge tolerates frequent handling and contact without rapid wear, extending service intervals and lowering lifetime cost. At approximately 0.7 kg, the device is robust yet manageable for handheld inspection stations. The material choice and heat treatment preserve thread form and boundary edges, ensuring consistent mechanical behaviour over thousands of checks and maintaining dimensional stability even in routine production environments. Speed and repeatability in the inspection flow As a dedicated no‑go gauge for fine threads, this tool simplifies inspection steps: immediate tactile feedback replaces time‑consuming measurement setups, improving throughput while maintaining repeatability across operators. The right‑hand metric configuration matches common production threads, allowing the gauge to be integrated at final inspection points or in-process checks. Using a fixed‑limit gauge reduces operator training needs and accelerates decision making on the shop floor. Standards alignment and practical application Compliance with DIN 13, 6g means the gauge fits into established calibration and inspection frameworks used in engineering and manufacturing. The clear normative backing facilitates documentation in quality records and traceability chains. Supplied as a purpose‑built ring, the instrument is most suitable for routine quality assurance of threaded parts, fixtures and assemblies where metric fine threads must meet specified acceptance criteria. For dependable thread control in production, request tailored application advice from Metav Werkzeuge or secure this Metav IndustryLine M40 no‑go ring gauge by contacting our team in Emmerich to confirm fit and integration into existing inspection routines. Technical data Article number: M315.240.4 GTIN: 4054469126548 Manufacturer: Metav IndustryLine Facts Thread size: M40 × 1 mm Weight: 0.7 kg Customs tariff: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13, tolerance class 6g Right‑hand metric ISO fine thread No‑go (reject) ring gauge FAQ What is the intended use for this ring gauge? The ring gauge is designed as a no‑go checking device for M40 × 1 mm metric ISO fine threads, providing a rapid pass/fail assessment during production or incoming inspection. What does tolerance class 6g signify? Tolerance class 6g defines the thread limits according to DIN 13, specifying the acceptable geometric envelope; the no‑go ring is manufactured to this class so that threads exceeding the lower tolerance bound will be reliably identified. Which material and treatment are used for longevity? Constructed from hardened gauge steel, the ring gauge offers wear resistance and dimensional stability suitable for repetitive inspection tasks. How is the gauge typically used in a quality process? The gauge is applied at final or in‑process inspection points to confirm whether an internal thread is oversize; a correct thread will not accept the no‑go ring, giving an immediate conformity verdict. Is this gauge suitable for automated checking? The robust form factor and standard thread size make the gauge appropriate for manual checks and some semi‑automated inspection fixtures; integration into fully automated systems depends on the specific handling equipment and fixturing used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40x1 Limit Go Thread Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Robust, hardened gauge steel construction combined with conformity to DIN 13, 6H and a compact 0.8 kg form factor makes this limit thread plug gauge ideal for reliable in-line verification and repeatable inspection. Order the limit thread plug gauge M40 x 1 mm directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug gauge M40 x 1 mm — right‑hand, hardened gauge steel (Metav IndustryLine) The limit thread plug gauge M40 x 1 mm is a right‑hand, metric ISO fine‑thread verification gauge designed for production inspection and incoming goods control in mechanical workshops and small series manufacturing. Metric ISO fine thread M40×1 right‑hand Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Compact 0.8 kg for workshop handling Accurate conformity that reduces rework and scrap The gauge verifies metric ISO fine threads to the specification M40 x 1 mm and the industrial tolerance class 6H under DIN 13, providing an objective pass/fail reference during assembly and inspection. By relying on a hard gauge geometry rather than subjective measurement, the device enables faster decisions on part conformity and helps to reduce downstream rework. The standardised tolerance indication means results are comparable across suppliers and inspection points, improving process control. Durable construction for long service life and repeatability Manufactured from hardened gauge steel, the tool resists wear and retains its measuring form during repeated engagement with threaded parts. The robust material choice preserves the reference profile and supports reproducible checks over time, reducing the frequency of replacement and recalibration. At a nominal mass of 0.8 kg, the gauge is easy to handle in the workshop while still offering the stiffness required for consistent seating into internal threads. Simple integration into inspection workflows The limit gauge provides an efficient means of thread verification in production, incoming inspection and maintenance tasks. As a dedicated verification tool for metric ISO fine threads, it replaces time‑consuming measurement chains with a single, quick check: acceptable threads will engage the reference side, while out‑of‑tolerance forms are immediately identifiable. The right‑hand configuration matches standard fastening orientations, simplifying operator training and line integration. Trust and availability from an experienced partner Supplied under the Metav IndustryLine label, the gauge benefits from a supplier established in precision metrology with a broad product range and central warehousing in Emmerich. This combination supports reliable availability and simplifies procurement for workshops and merchants seeking consistent quality. Choosing a standardized mechanical gauge offers a pragmatic balance between inspection speed and traceable conformity in everyday industrial use. Contact Metav Werkzeuge for individual advice on integrating the Metav IndustryLine limit thread plug gauge M315.040.4 into quality control routines and to request a formal supply offer Technical data Article number: M315.040.4 GTIN: 4054469123219 Weight: 0.8 kg Material: Gauge steel, hardened Standard: DIN 13, 6H Thread: M40 x 1 mm right‑hand Tariff number: 90173000 Key figures Thread size: M40 x 1 mm Tolerance class: 6H Net mass: 0.8 kg Special features Right‑hand metric ISO fine thread verification Hardened construction for wear resistance Intended for production and incoming inspection Category: Gauges / Thread gauges FAQ What thread size does this gauge check? The limit thread plug gauge checks M40 x 1 mm metric ISO fine threads and is suitable for verification to DIN 13, 6H using the Metav IndustryLine SKU M315.040.4. Is the gauge suitable for production use or only sample checks? The limit thread plug gauge M40 x 1 mm is designed for routine production and incoming‑goods checks where fast, repeatable verification is required. What material is the gauge made from and why does that matter? This Metav IndustryLine limit gauge is made from hardened gauge steel, which maintains the reference profile under repeated use and ensures long‑term repeatability for the M40 x 1 mm thread checks. Does this gauge cover left‑hand threads or special forms? The supplied limit thread plug gauge M40 x 1 mm is a right‑hand metric ISO tool; left‑hand or non‑standard thread forms require dedicated gauges specified to those orientations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40x1 Thread Go Ring Gauge Metric ISO Fine Pitch Right-Hand Hardened Plug Gauge DIN 13, 6g - Metav IndustryLine
Take advantage of a hardened gauge-steel design and strict conformity to DIN 13, 6g to achieve fast, reproducible thread checks on the production floor; the Go ring for M40 × 1 mm fine threads provides clear pass/fail control and long service life. Order directly via Metav Werkzeuge or consult our advisors for specification support. Thread ring gauge M40 × 1 mm (Go) — Go ring gauge, hardened gauge steel (Metav IndustryLine) The Thread ring gauge M40 × 1 mm (Go) is a precision Go ring for rapid verification of metric ISO fine external threads (right-hand), intended for shop-floor quality control and incoming inspection. Hardened gauge-steel construction Conforms to DIN 13, 6g For M40 × 1 mm metric fine threads Right-hand Go ring for quick pass/fail checks Rapid, unambiguous pass/fail inspection for production lines The Go ring is designed to provide a clear and immediate assessment of external threads: if the tested part enters the ring smoothly, the thread is accepted; if not, it is rejected. This straightforward check reduces inspection time compared with full dimensional measurement and supports efficient throughput in batch production. With conformity to DIN 13, 6g and an exact M40 × 1 mm pitch, the gauge ensures that checked components comply with the expected tolerance class, preserving interchangeability and avoiding assembly failures. The functional simplicity of a Go ring converts technical accuracy into operational speed. Robust construction that minimises wear and handling uncertainty Manufactured from hardened gauge steel, the ring resists wear and maintains dimensional stability over many cycles, which lowers the frequency of replacement and reduces downtime. Hardened tool steel provides consistent seating and repeatable tactile feedback during inspection, which helps operators make reliable judgements without complex instrumentation. The compact, solid geometry of the ring also simplifies storage and handling on the shop floor, while the inherent mass and finish of the material help to avoid burr formation that could otherwise affect results. Practical integration into quality systems and traceability A gauge of this type suits both incoming inspection and in-process control. The straightforward nature of a Go ring makes it ideal as a first-line control in assembly sequences and as part of a layered quality strategy where quick decisions are required. Identification data such as the item code and GTIN support traceability in inventory and audit processes, allowing the gauge to be recorded in inspection logs or a calibration schedule. As a Metav IndustryLine product, the ring complements a broader precision portfolio aimed at delivering reliable measuring tools for industry and trade. Choose the Metav IndustryLine Go ring for dependable thread checks and clear production control — order via Metav Werkzeuge for rapid fulfilment or contact our team for tailored advice Technical data Article number: M315.140.4 GTIN: 4054469124889 Mass / Size: M40 × 1 mm Weight: 0.5 kg Data Standard: DIN 13, 6g Category (eClass): 21170214 Tariff number: 90173000 Special features Material: hardened gauge steel Type: Go (gut) ring gauge Thread direction: right-hand Intended use: verification of metric ISO fine external threads FAQ What does the Go designation mean for this thread ring? The Go designation indicates that the ring is manufactured to allow a correctly produced external thread to pass; the Thread ring gauge M40 × 1 mm (Go) checks that the part does not exceed the maximum material condition for the specified tolerance class. Can this ring be used in serial production inspection? Yes — the hardened construction and simple pass/fail function make the gauge suitable for fast, repetitive checks in serial production and incoming inspection routines. Which tolerance class does the gauge correspond to? The gauge conforms to DIN 13, 6g, matching the common metric ISO fine-thread tolerance for many engineering applications. Is the gauge suitable for both right- and left-hand threads? This specific ring is for right-hand threads; left-hand versions require a dedicated ring produced with the opposite helix. How should the gauge be stored to maintain accuracy? Store the ring in a dry, clean environment and protect it from shocks and contamination; the hardened gauge steel resists wear, but careful handling prolongs service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40x1.5 Limit Thread Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Ensure consistent thread conformity with a hardened tool‑steel construction and DIN 13 (6H) tolerance for repeatable go/no‑go checks; the M40 × 1.5 ISO metric fine‑thread specification suits standard production and inspection tasks. Order the limit thread plug gauge directly via Metav Werkzeuge or consult our team for application advice. Limit thread plug gauge M40 x 1.5 — ISO metric fine thread, hardened tool steel (Metav IndustryLine) A limit thread plug gauge M40 x 1.5 for right‑hand ISO metric fine threads, designed for rapid go/no‑go verification in manufacturing and quality control. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H M40 × 1.5 ISO metric fine thread Right‑hand thread for standard components Reliable verification that keeps production moving A hardened limit gauge provides an unambiguous check of internal thread quality, reducing rework and stoppages on the shop floor. The compact inspection tool is tailored to the M40 × 1.5 metric fine‑thread form and, when used as a go/no‑go gauge, enables immediate pass/fail decisions without lengthy measurement routines. This direct verification supports lean production by cutting down on inspection time while maintaining traceable acceptance criteria. Durable design for repeatable measurements Manufactured from hardened tool steel, the gauge withstands repeated engagement with threaded components and maintains edge fidelity across many inspection cycles. Conformance to DIN 13, 6H specifies the tolerance band and ensures compatibility with standard ISO metric thread fits; this means the gauge is suitable for regular use in a production environment where consistent interchangeability matters. The robust construction minimises dimensional drift and provides long service life under normal workshop conditions. Practical application in workshop and quality control The right‑hand configuration matches conventional threaded components, simplifying the inspection workflow in assembly and incoming‑goods checks. As a fixed‑limit gauge, it replaces subjective visual assessments with a clear physical criterion, improving inspection reliability for operators with varying experience. Integration into routine quality checks is straightforward: use the gauge at defined inspection points to verify conformance and document results in quality records for process control. Choose the Metav IndustryLine limit thread plug gauge for dependable thread inspection and contact Metav Werkzeuge for ordering or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.040.6 GTIN: 4054469123226 Tariff number: 90173000 Facts Weight: 0.7 kg Thread: M40 × 1.5, right‑hand Standard: DIN 13, 6H Special features Material: hardened tool steel (gauge steel) Type: limit (go/no‑go) thread plug gauge Category: gauges, limit gauges FAQ What does the tolerance designation 6H mean for the gauge? The 6H tolerance refers to the internal thread tolerance field according to DIN 13; the limit thread plug gauge M40 × 1.5 is manufactured to match that tolerance, ensuring compatibility with standard ISO metric internal threads. Can the gauge be used for production inspection and incoming goods checks? Yes, the limit thread plug gauge M40 × 1.5 by Metav IndustryLine is intended for rapid go/no‑go checks in both in‑process production control and incoming‑goods inspection. Which material is the gauge made from and why is that important? The gauge is made from hardened tool steel, which preserves the thread form under repeated usage and provides long‑term dimensional stability for reliable inspection. Is the gauge suitable for non‑standard or left‑hand threads? This particular item is a right‑hand limit thread plug gauge for ISO metric fine threads; left‑hand or special thread forms require a dedicated gauge designed for those specifications. How is the limit thread plug gauge M40 × 1.5 documented for quality assurance? Use the gauge as a physical acceptance tool and record pass/fail outcomes in quality documentation; the M315.040.6 designation and DIN 13, 6H standard provide clear traceability for audits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com