Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M40x1.5 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of DIN 13 / tolerance 6g conformity, hardened gauge steel construction and precise fit for M40 × 1.5 metric ISO fine threads to keep inspection routines efficient and reproducible. Order the ring gauge directly via Metav Werkzeuge or consult the Metav team for application advice and batch checks. Thread ring gauge M40 x 1.5 mm, DIN 13 — Metav IndustryLine Thread ring gauge M40 x 1.5 mm, DIN 13, a precision inspection gauge for metric ISO fine threads, right-hand orientation Hardened gauge steel construction DIN 13 tolerance class 6g For M40 x 1.5 metric ISO fine threads Right-hand thread inspection gauge Reliable verification for workshop and inspection This thread ring gauge is designed for consistent pass/fail verification of metric fine threads and aligns with DIN 13 standards and a tolerance 6g acceptance class. The geometry specified by the standard ensures that mating parts produced to the same normative system will engage as intended, reducing uncertainty in assembly trials. Used in routine quality checks, the gauge provides a rapid, unequivocal indication of thread conformity so that production decisions can be made on objective criteria rather than estimation. Built for traceable accuracy and long service life Manufactured from hardened gauge steel, the ring maintains dimensional stability across repeated use and resists wear that would otherwise erode inspection certainty. The hardened material and the DIN-based heat treatment profile result in a tool that preserves its measuring edge, supporting reproducible results across inspection cycles. For workshops seeking robust gauges for everyday operation, this construction reduces the need for frequent replacement and supports a dependable quality-control workflow. Simple integration into existing inspection routines The component’s specification — M40 x 1.5 thread size, metric ISO fine thread form and right-hand orientation — matches common thread production practices in mechanical and assembly engineering. The gauge is suitable for inline sampling, first-article inspection or final acceptance testing and can be combined with other calibrated gauges in a control set. Its compact, self-contained design simplifies storage and handling during shift changes and shopfloor audits. Confidence, traceability and supplier support Supplied under the Metav IndustryLine range, the gauge benefits from the supplier’s long-standing presence in precision tools and a transparent supply chain that emphasises reliable availability and quality control. The use of standardised specifications supports traceability in inspection records and reduces ambiguity in supplier-to-customer communication. For firms that require a pragmatic balance of accuracy and operational simplicity, this ring gauge supports reproducible quality decisions and smoother production flows. Contact Metav Werkzeuge for tailored application advice or to arrange supply of the M40 thread ring gauge directly from Metav Werkzeuge. Technical data Article number: M315.240.6 GTIN: 4054469126555 Label: Thread ring gauge M40 x 1.5 mm, DIN 13, right-hand Facts Thread size: M40 x 1.5 Tolerance class: 6g Tariff number: 90173000 Weight: 0.7 kg Materials & features Material: hardened gauge steel Standard: DIN 13 Right-hand thread Application: metric ISO fine thread inspection FAQ What thread size does this gauge check? The thread ring gauge checks M40 x 1.5 metric ISO fine threads and is intended for standard fine-thread verification. Is the gauge suitable for right-hand threads only? Yes, the ring gauge is produced for right-hand metric ISO fine threads and matches the right-hand geometry specified in DIN 13. Which tolerance class does the gauge represent? This inspection tool is manufactured to the 6g tolerance class in accordance with DIN 13, making it suitable for standard acceptance testing. What material is the ring gauge made from? The gauge is made of hardened gauge steel, chosen for dimensional stability and wear resistance during repeated inspection cycles. Can the ring gauge be used in production sampling and final inspection? The ring gauge is designed for routine sampling, first-article checks and final acceptance testing of metric fine-threaded components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40x2 Thread Ring Gauge Go, Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Reliable thread verification is delivered through hardened gauge steel and adherence to DIN 13, 6g tolerances, ensuring consistent pass/fail decisions on metric fine threads. The compact M40 x 2 mm 'go' ring offers fast in-process checks and repeatable contact geometry. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M40 x 2 mm 'Go' — hardened gauge steel, DIN 13 (Metav IndustryLine) The Thread ring gauge M40 x 2 mm 'go' is a right-hand metric ISO fine-thread inspection ring designed for rapid pass verification in production and quality control environments. Hardened gauge steel construction Conforms to DIN 13, 6g tolerance 'Go' ring for quick pass checks Right-hand metric ISO M40 x 2 thread Fast, reliable pass/fail control for production The inspection ring provides a straightforward, mechanical means of verifying external threads at line speed. With its 'go' designation, the ring confirms whether a threaded shaft meets the maximum material condition defined by DIN 13, 6g, enabling immediate decisions without measurement conversion. This approach reduces cycle time in repetitive checks and lowers the risk of downstream assembly faults. The compact design supports easy handling at the workstation while maintaining the contact geometry necessary for repeatable verification. Durable construction for long service life Manufactured from hardened gauge steel, the ring is stabilised against wear and deformation, preserving its functional profile through repeated use. The material selection and heat treatment ensure stable boundary conditions between the mating thread and the gauge so that dimensional drift is minimised. The robust build suits routine shop-floor use under typical handling and storage conditions, and its weight and form factor allow quick manual operation while retaining the stiffness needed for reliable contact. Integration into quality workflows and traceability As a purpose-made inspection ring, the component is intended for go/no-go control rather than dimensional measurement, making it ideal for incoming inspection, in-process control and final acceptance tasks. The gauge supports consistent quality gates in production chains and simplifies documentation: a single tactile check replaces multiple optical or numerical comparisons when the requirement is a simple pass/fail criterion. The ring’s compliance with industrial thread standards also facilitates harmonised specification across suppliers and internal procurement. For order placement or technical advice on Metav IndustryLine gauges, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: M315.140.7 GTIN: 4054469124902 Material: gauge steel, hardened Nominal thread: M40 x 2 mm Tolerance: DIN 13, 6g Weight: 0.5 kg Type: Go ring gauge, right-hand Core data Nominal diameter: 40 mm Thread pitch: 2 mm Weight (kg): 0.5 Tariff number: 90173000 Special features Hardened construction for wear resistance Metric ISO fine-thread application 'Go' designation for pass checks Right-hand thread orientation Suitable for production and incoming inspection FAQ How does a 'go' ring gauge indicate conformity? A 'go' ring gauge passes the mating thread if the external thread fully engages the ring without forced fit; the Thread ring gauge M40 x 2 mm 'go' is designed to accept threads that meet the DIN 13, 6g acceptance envelope. Is the material suitable for continuous shop-floor use? Yes, the ring is made from hardened gauge steel; this ensures the Thread ring gauge M40 x 2 mm 'go' maintains profile integrity and resists wear during repeated manual checks. Can this gauge be used for both coarse and fine threads? This specific ring is intended for the M40 x 2 mm metric fine thread configuration and is not interchangeable with coarse-pitch gauges; select the matching nominal and pitch for the intended application. What does DIN 13, 6g mean for acceptance criteria? DIN 13 defines metric ISO thread forms and limits; the 6g designation specifies the tolerance class for the external thread that the gauge checks against, ensuring consistent interchangeability. Is the gauge supplied ready for immediate use? The ring is supplied as a hardened, ready-to-use inspection tool; handling and storage according to standard good practice will preserve its accuracy and service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40x2 Three-Point Go/No-Go Thread Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of precise pass/fail verification, hardened construction and compliance with DIN 13 to keep thread inspections efficient and reproducible; order the limit thread plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit thread plug gauge M40 x 2 — right‑hand, DIN 13 (6H) — Metav IndustryLine A Limit thread plug gauge M40 x 2 designed for quick verification of metric ISO fine threads to DIN 13 with 6H tolerance, suited to production and incoming‑inspection routines where reliable go/no‑go checks are required. DIN 13 – tolerance class 6H Hardened gauge steel construction For metric fine thread M40 x 2 Right‑hand thread verification Faster, reliable thread inspection for production flow A calibrated go/no‑go approach with a limit thread plug gauge transforms thread inspection into a rapid, objective decision. Compliance with DIN 13 and the 6H tolerance class ensures that every check refers to recognised thread geometry standards, reducing ambiguity at the control station. Using a dedicated plug gauge for M40 x 2 threads eliminates time‑consuming measurements with micrometres or optical comparators for routine checks: a smooth “go” confirms form and pitch, while a definitive “no‑go” prevents nonconforming parts progressing down the line. This method enhances throughput by cutting inspection time and lowering the risk of assembly faults, which in turn reduces rework and scrap costs. Robust material and design for repeatable measurements Manufactured from hardened gauge steel, the gauge offers long service life and stable dimensional behaviour in typical workshop environments. The hardened construction resists wear from repeated engagement in threaded components, maintaining the defined limits of the gauge over many cycles and thus preserving measurement reliability. The right‑hand orientation matches standard production threads, and the compact, balanced geometry supports easy handling on the bench. Together, these attributes make the tool a dependable instrument for frequent use and ensure consistent pass/fail outcomes without elaborate setup. Simple integration into quality procedures and traceability The plug gauge functions as a practical extension of existing quality systems: it is suitable for inline checks, incoming inspection and final assembly control. The tactile go/no‑go method requires minimal operator training yet offers clear traceability when recorded in inspection logs. With the supplied SKU and GTIN, the item can be uniquely identified for inventory and calibration scheduling. Used correctly, the gauge minimises uncertainty in threaded assemblies and supports process stability across batch production, tooling changes and supplier inspections. For secure and standard‑conformant thread verification order the Metav IndustryLine limit thread plug gauge via Metav Werkzeuge or contact our consultants at Metav Werkzeuge for application guidance and delivery details Technical data Article number: M315.040.7 GTIN: 4054469123233 Standard: DIN 13, 6H Facts Thread size: M40 x 2 Weight: 0.76 kg Tariff number: 90173000 Special features Material: hardened gauge steel Thread direction: right‑hand Condition: good FAQ What thread size does this gauge verify? The limit thread plug gauge verifies M40 x 2 metric fine threads according to DIN 13 with 6H tolerance. Is the gauge suitable for production line checks? Yes, the Metav IndustryLine plug gauge is intended for routine production and incoming‑inspection go/no‑go checks to provide rapid, unambiguous pass/fail results. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which provides wear resistance and dimensional stability for repeatable measurements over extended use. Does the product include traceable identifiers for inventory control? Yes, the item is supplied with the GTIN 4054469123233 and article number M315.040.7 for clear identification in procurement and calibration records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40×1.5 Thread Ring Gauge, Go, DIN 13 6g, Right-Handed, Hardened Gauge Steel - Metav IndustryLine
Take advantage of DIN 13 conformity and a hardened gauge steel construction to secure fast, reproducible pass/fail checks on external metric fine threads; the compact design and low mass support efficient handling on the shop floor. Order directly via Metav Werkzeuge or consult our specialists for specification matching. Thread gauge ring M40 x 1.5 mm — Ring gauge for metric ISO fine thread, DIN 13 A Thread gauge ring M40 x 1.5 mm designed for rapid verification of external metric ISO fine threads in production and quality control, providing a clear go/no‑go reference for right‑handed threads. DIN 13 compliant, tolerance zone 6g For M40 x 1.5 metric ISO fine threads Hardened gauge steel construction 'Go' ring gauge for quick pass testing Accurate pass/fail control to speed production The primary role of this ring gauge is to deliver decisive, repeatable pass/fail checks during series production and incoming inspection. Conformance with DIN 13 and the 6g tolerance zone means the tool serves as a reliable reference for verifying external thread profiles against the established metric ISO fine‑thread standard. By providing an unambiguous acceptance criterion, the gauge reduces time spent on individual measurements and cuts rework rates, improving throughput without sacrificing measurement integrity. The controlled geometry of the ring establishes tactile confirmation of conformity, making it easy to integrate into routine quality checks. Durable construction for workshop conditions Manufactured from hardened gauge steel, the ring offers long service life and stable performance under regular use. The hardened material resists wear at the functional flank surfaces so that the acceptance boundary remains consistent over many inspection cycles. The tool’s modest mass (approx. 0.36 kg) and compact form make handling straightforward while still delivering the required stiffness for reliable contact with mating external threads. Corrosion protection or storage practices extend service intervals further; when used as intended, the gauge provides a stable benchmark for process control and traceable inspection routines. Practical integration into quality systems This ring gauge is geared towards shop‑floor technicians and quality engineers who require a fast, authoritative check for external threads in assemblies, fastening production, and component inspection. Its designation as a 'Go' gauge clarifies that the ring represents the maximum material condition for a mating external thread: a successful engagement indicates conformity to the specified M40 x 1.5 mm profile. Because the item is compact and quick to use, it supports frequent sampling plans and can be combined with dimensional records to document batch quality. For users seeking traceability or tailored inspection routines, Metav Werkzeuge’s specialists can advise on complementary gauges and inspection strategies. Order the Metav IndustryLine ring gauge via Metav Werkzeuge in Emmerich for consistent thread inspection; contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance with selection or batch requirements Technical data Article number: M315.140.6 GTIN: 4054469124896 Weight: 0.36 kg Facts Thread size: M40 x 1.5 Tolerance zone: 6g Right‑hand thread Special features Material: hardened gauge steel Standard: DIN 13 Gauge type: 'Go' (pass) ring gauge FAQ What does the tolerance designation 6g mean for the gauge? The tolerance zone 6g specifies the acceptance band for the mating external thread according to DIN 13; the ring gauge is manufactured to that tolerance to provide a definitive go check for compliant external threads. Is this ring gauge suitable for fine pitch threads only? Yes, the tool is intended for metric ISO fine threads of the specified size and pitch (M40 x 1.5 mm) and is produced to match that standard precisely. How should the gauge be used for routine checks? Engage the external thread with the ring by hand; a fitting engagement without force indicates a pass. The ring acts as a practical go/no‑go reference to speed up sampling and reduce measurement time. Can this gauge be used as a calibration standard? The ring serves as a production and inspection reference; for formal calibration records, follow your internal calibration procedures or request calibration services that meet your traceability requirements. What handling or storage precautions are recommended? Keep the gauge clean and dry, avoid impacts, and store in a protective case when not in use to preserve the hardened contact surfaces and dimensional integrity. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40×2 Thread Ring Gauge For Metric ISO Fine Thread Right-Hand DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Taking advantage of a compact, standards‑based design and robust, hardened gauge steel construction, this ring gauge combines reliable DIN 13 / 6g conformity with practical workshop handling to keep thread inspections quick and reproducible. Order the gauge directly via Metav Werkzeuge or consult our specialists for delivery and integration advice. Thread ring gauge M40 x 2 mm — Metric ISO fine thread verification, DIN 13, 6g (Metav IndustryLine) A Thread ring gauge M40 x 2 mm designed for rapid verification of external ISO metric fine threads (right‑hand), complying with DIN 13 tolerance class 6g for industrial and workshop inspection. Thread size M40 x 2 mm, ISO metric fine Tolerance class 6g to DIN 13 Hardened gauge steel for long life Right‑hand thread for external inspection Reliable, standards‑based verification that saves time The ring gauge is intended for fast verification of external metric fine threads and supports routine quality checks on production and incoming parts. Manufactured to DIN 13 with a 6g tolerance class, the gauge provides a clear, standards‑based pass/fail criterion that speeds decisions on acceptability and reduces time spent at the inspection bench. Built for practical use in busy shops, the device is suited to mechanical engineering, assembly inspection and production sampling where consistent repeatability matters. Robust material and geometry for consistent results Constructed from hardened gauge steel, the gauge offers high wear resistance and dimensional stability during repeated use. The material choice preserves the thread form and helps maintain the original measuring geometry across many inspection cycles, which in turn preserves measurement integrity and reduces the need for frequent replacement. The solid construction and nominal mass ensure comfortable handling and a stable check on the workpiece while minimising user‑induced variability. Integrates into quality processes and traceability systems As a dedicated verification tool for ISO metric fine thread profiles, the ring gauge complements visual and dimensional control systems by providing an unequivocal mechanical check of thread fit. Its concise specification facilitates documentation and traceability in inspection records and supports routine quality control workflows. By using a standards‑aligned gauge, inspection staff can focus on corrective actions rather than ambiguous measurement results, improving throughput and lowering rework rates. For dependable thread checks and professional advice on integrating this Metav IndustryLine M40 x 2 mm ring gauge into existing inspection procedures, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for ordering and delivery information. Technical Data Article number: M315.240.7 GTIN: 4054469126562 Thread: M40 x 2 mm Standard: DIN 13, 6g Weight: 0.7 kg Core specifications Thread pitch: 2 mm Thread nominal size: M40 Direction: Right‑hand Materials & features Hardened gauge steel Designed for verification of external ISO metric fine threads Category: gauges / templates FAQ What thread form and size does this gauge inspect? The ring gauge inspects M40 x 2 mm external threads according to the ISO metric fine thread form and is specified to DIN 13 with tolerance class 6g. Is the gauge suitable for production line sampling? Yes, the gauge is designed for routine production and incoming inspection tasks where quick, repeatable mechanical checks of external threads are required. What material is the gauge made from? The gauge is manufactured from hardened gauge steel to deliver wear resistance and dimensional stability for repeated inspections. Does the product include a calibration certificate? No specific calibration certificate is stated in the provided product data; calibration status should be confirmed with Metav Werkzeuge if a traceable certificate is required. How should the gauge be used to ensure reliable results? Use the gauge as a go/no‑go check for external thread conformity, ensure clean threads and correct seating, and store the gauge in a dry, protected location when not in use to preserve accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40×3 Limit Thread Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Reliable, repeatable inspection of metric ISO fine threads is provided by the combination of M40×3 sizing, DIN 13 / 6H tolerance and hardened gauge steel construction — an economical choice for consistent production quality. Order the limit thread plug gauge directly via Metav Werkzeuge or consult the Metav technical team for specification advice. M40×3 Limit thread plug gauge — Metric ISO fine thread, right-hand (Metav IndustryLine) The M40×3 limit thread plug gauge verifies metric ISO fine threads to DIN 13 with a 6H tolerance; designed as a right‑hand plug gauge for fast go/no‑go checks in workshop and inspection environments. Metric ISO fine thread M40×3 DIN 13 tolerance class 6H Hardened gauge steel construction Right‑hand limit plug for quick checks Ensure conformity at speed on the shop floor A compact verification tool that brings measurable efficiency: the plug gauge provides a direct, mechanical answer to whether an internal thread meets the M40×3 specification and DIN 13 / 6H tolerance. The limit design enables immediate go/no‑go assessment, reducing time spent at the micrometre and lowering cycle times for batch inspections. For production environments where throughput and traceable acceptance are essential, this plug gauge simplifies decision‑making and cuts rework. Robust material and geometry for long service life Constructed from hardened gauge steel, the gauge resists wear and preserves the reference geometry that defines reliable thread assessment. The solid build and mass contribute to a stable feel during engagement, which supports repeatable results over extended use. Durable materials reduce the frequency of reworking or replacements, helping to maintain quality controls without frequent downtime for gauge renewal. Fits established quality workflows and traceability needs Designed for straightforward integration into inspection routines, the limit plug gauge is suitable for in‑process checks, final inspections and incoming goods control. With a clear SKU (M315.040.8) and GTIN reference, the item is easy to catalogue and trace within an inventory or quality management system. The gauge supports machinists and quality engineers in maintaining consistent standards across batches, ensuring thread conformity before assembly or shipment. Choose Metav IndustryLine for proven thread verification — contact Metav Werkzeuge in Emmerich for application advice and reliable supply of the M40×3 limit thread plug gauge Technical data Article number: M315.040.8 GTIN: 4054469123240 ECLASS: 21170235 Tariff number: 90173000 Facts Thread size: M40 × 3 Standard: DIN 13 Tolerance class: 6H Weight: 0.82 kg Design & features Material: hardened gauge steel Right‑hand metric ISO fine thread Limit plug gauge (go/no‑go function) Category: gauges / plug gauges FAQ What thread size and tolerance does this gauge check? The gauge checks metric ISO fine threads sized M40×3 and is manufactured to DIN 13 with a 6H tolerance class. How is the limit plug gauge used in inspection? A limit plug gauge engages the internal thread; the correct (go) condition confirms the thread is within tolerance while the limiting end indicates excessive deviation, enabling quick acceptance or rejection during routine checks. Is the gauge suitable for heavy daily use in a workshop? Yes. The hardened gauge steel construction and solid build make the gauge appropriate for frequent use in machining and inspection environments where repeatability is required. Which identifier should be used for ordering or inventory? Reference SKU M315.040.8 (GTIN 4054469123240) when ordering or logging the gauge in a parts system. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40×3 Thread Go Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of a hardened gauge steel construction and precise DIN 13, 6g tolerance to standardise thread checks on ISO fine threads; order the thread ring gauge directly via Metav Werkzeuge or request specialist advice from our consultants. Thread ring gauge M40 x 3 mm — hardened gauge steel, DIN 13 tolerance Thread ring gauge M40 x 3 mm for verification of metric ISO fine threads (right-hand); designed for shop-floor go/no-go inspection and routine quality control. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For metric ISO fine threads, right-hand Weight approx. 0.7 kg for handling Reliable verification reduces rework and production delays The hardened gauge steel body and compliance with DIN 13 (tolerance 6g) make this ring gauge a pragmatic choice for repeatable thread verification. As a go/no-go checking tool, the gauge ring ensures that thread forms meet the required standard before assembly, cutting down on rejected parts and unscheduled rectification. The discrete function is simple: a correct thread will pass the "go" dimension while an out-of-tolerance thread is identified immediately, improving throughput and traceability in serial production. Purpose-built for metric ISO fine threads Specified as M40 x 3, the gauge ring is tailored to metric ISO fine-thread profiles and right-hand threading. The geometry follows the standard profile so that inspections are representative of functional fit in threaded assemblies. At roughly 0.7 kg, the ring combines a solid feel with manageable handling during repeated checks. The tool serves both workshop and incoming inspection applications where standard-compliant evaluation of fine threads is required. Robust design for workshop use and QC routines Hardened material and careful finishing deliver durability under frequent handling and bench inspection. The tool’s construction supports consistent seating and minimises wear, sustaining accuracy over many inspection cycles. Used within a structured quality process, the ring gauge contributes to predictable assembly behaviour and reduced warranty claims. For sourcing and inventory efficiency, Metav IndustryLine provides traceable product details and reliable distribution from its Emmerich hub. For tailored advice on implementing this thread ring gauge into existing inspection routines, contact Metav Werkzeuge for specialist guidance and procurement support. Technical data Article number: M315.240.8 GTIN: 4054469126579 Material: Lehrenstahl, gehärtet Dimension: M40 x 3 Standard: DIN 13, 6g Weight: 0.7 kg Category: Lehren / Gauges Tariff code: 90173000 Numbers / Core technical data Mass / size: M40 x 3 Weight (approx.): 0.7 kg Tolerance class: 6g GTIN: 4054469126579 Special features Right-hand metric ISO fine thread verification Hardened gauge steel for long service life Designed for go/no-go checks in serial inspection Suitable for workshop and incoming quality control FAQ What is the intended use of this thread ring gauge? The thread ring gauge M40 x 3 mm is intended for go/no-go verification of metric ISO fine threads, providing quick acceptance or rejection during production or incoming inspection. Which standard does the gauge follow and what does that mean? The gauge complies with DIN 13, tolerance class 6g; this means the ring matches the standard thread profile and dimensional limits used for many metric ISO fine-thread checks. Can this gauge be used for left-hand threads? No, the item is specified for right-hand metric ISO fine threads; left-hand threads require a corresponding left-hand gauge. What material is the ring made from and how does that affect longevity? Constructed from hardened gauge steel, the ring offers enhanced wear resistance and stable seating under repetitive use, extending service life in inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M40×3 Three-Point Go Thread Ring Gauge Metric ISO Fine Right-Handed, Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
Combine repeatable Go/No‑Go verification, hardened construction and DIN conformity to secure thread quality on every batch; the compact M40 x 3 ring delivers reliable in‑process inspection and long service life. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M40 x 3 mm (Go) — hardened gauge steel, DIN 13 6g — Metav IndustryLine A thread ring gauge M40 x 3 mm (Go) designed for fast verification of metric ISO fine threads in production, inspection and maintenance. Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g Suited to M40 x 3 mm metric fine threads Faster pass/fail decisions for production control The Go ring provides an immediate and objective pass/fail check that speeds up inspection routines and reduces downtime. Manufactured to DIN 13 with tolerance class 6g, the gauge gives a clear acceptance criterion for metric fine threads, eliminating interpretation and supporting consistent quality control. Using a dedicated ring for right‑hand threads simplifies workflow and reduces the risk of assembly errors in repetitive operations. Durable design for repeated workshop use Made from hardened gauge steel, the ring is specified for extended wear resistance under frequent use; that robustness supports stable results over time and lowers replacement frequency. At 0.51 kg, the gauge combines sufficient mass for tactile handling with a compact footprint for bench or tool‑room storage. The Go type is made to engage the full thread form for practical wear distribution, helping to preserve critical dimensions during routine checking. Traceable identification and seamless integration into inspection procedures Clear identification with SKU and GTIN enables traceable tool management and stock control in inspection departments. The ring is categorised for metric ISO fine threads and fits into standard quality workflows, complementing visual inspection, torque checks and process documentation. Where documentation is required for audits, the gauge’s conformity to recognised standards provides a straightforward reference and supports internal traceability without adding process complexity. Choose the Metav IndustryLine M40 x 3 Go ring as a fast, standardised check for metric fine threads and contact Metav Werkzeuge GmbH in Emmerich for ordering and technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.140.8 GTIN: 4054469124919 Weight: 0.51 kg Thread size: M40 x 3 Type: Go ring gauge Core specifications Material: Gauge steel, hardened Standard: DIN 13, tolerance class 6g Thread direction: right-hand Features Good (Go) ring for metric ISO fine threads Category: Gauges / Measuring devices Tariff number: 90173000 FAQ What is the purpose of a Go ring gauge? The Go ring gauge provides a simple pass/fail inspection for external threads; the thread ring gauge M40 x 3 mm (Go) from Metav IndustryLine confirms that a threaded part is within the maximum material limits defined by DIN 13, 6g Can this gauge be used for left‑hand threads? No, this ring is made for right‑hand metric ISO fine threads; a left‑hand version would be required for those applications Which materials is the gauge suitable for checking? The ring checks geometric conformity of external threads irrespective of the workpiece material; it is intended for production inspection of components made from steel, aluminium or other machinable alloys Is the ring suitable for serial inspection on the shop floor? Yes, the hardened construction and compact form factor make the gauge well suited for routine shop‑floor checks, supporting rapid sampling and reduced cycle times How is the gauge identified for stock and traceability? The item is listed under SKU M315.140.8 with GTIN 4054469124919, enabling integration into inventory and quality records Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42x1 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread, Right Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of a precision-tested combination of M42 × 1 mm metric thread verification, hardened gauge steel construction and conformity to DIN 13 / 6H for robust in-process inspection; order the limit thread plug gauge directly via Metav Werkzeuge or contact our consultants for further specification advice. Limit thread plug gauge M42 × 1 mm — right-hand metric ISO fine thread, hardened gauge steel The Limit thread plug gauge M42 × 1 mm is a right-hand go/no-go gauge designed for rapid verification of metric ISO fine threads in production and incoming inspection, ensuring compliance with DIN 13 tolerance class 6H. Metric ISO fine thread M42 × 1 Manufactured to DIN 13 tolerance class 6H Hardened gauge steel for long service life Right-hand thread, go/no-go verification Fast, unequivocal thread checking on the shop floor A compact limit gauge provides an immediate pass/fail verdict, speeding up inspection cycles and reducing downtime. The hardened gauge steel body resists wear and maintains form over repeated use, which means fewer replacements and a lower total cost of ownership. Conformity to DIN 13 and the 6H tolerance class ensures that thread forms are checked against a recognised standard, providing reliable evidence for quality control records and reducing uncertainty during assembly operations. Built for repeatability and low maintenance The go/no-go principle implemented in this plug gauge removes subjectivity from thread inspection: the "go" end verifies correct major diameter and pitch fit, while the "no-go" end detects oversize or out-of-tolerance threads. The result is consistent, repeatable decision-making at the machine or inspection bench. Constructed from hardened gauge steel, the tool resists deformation and abrasion, preserving calibration between checks and supporting continual process control without frequent recalibration cycles. Integrating the gauge into quality workflows A limit thread plug gauge suits production environments where quick verification is needed at several points in the value chain, from machining centres to final inspection. Traceable inspection results can be recorded alongside batch numbers to support corrective actions and supplier control. Using a dedicated go/no-go gauge reduces rework and customer returns by catching deviations early, supporting lean manufacturing objectives and improving first-pass yield. For dependable thread verification and to discuss how this M42 × 1 mm limit gauge can be integrated into existing inspection routines, contact Metav Werkzeuge for product availability and technical consultation Technical data Article number: M315.042.4 GTIN: 4054469123264 Manufacturer: Metav IndustryLine Facts Thread designation: M42 × 1 mm Pitch: 1 mm Tolerance: DIN 13, 6H Weight: 0.8 kg Special features Material: hardened gauge steel Right-hand metric ISO fine thread Go / no-go checking for quick decisions Suitable for production and incoming inspection FAQ What is checked with this limit thread plug gauge? The limit thread plug gauge checks the form and size of metric ISO fine threads; the M42 × 1 mm gauge verifies conformity to DIN 13, tolerance class 6H using a go/no-go method. Is the gauge suitable for production use on the shop floor? Yes, the hardened gauge steel construction of the M42 × 1 mm plug gauge is designed for regular use in production and inspection environments where rapid thread verification is required. Which standards does the gauge comply with? This plug gauge is manufactured to meet DIN 13 requirements and the tolerance class 6H, ensuring standardised thread acceptance criteria. How is wear managed and how long does the gauge last? Wear is minimised by the hardened gauge steel material; regular inspection intervals and proper handling prolong service life and maintain reliable go/no-go performance. Can this gauge detect thread pitch errors as well as diameter issues? The go/no-go ends assess both major diameter and effective engagement; significant pitch or flank form errors that prevent proper engagement will be indicated by a no-go result. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42x1 Thread Ring Gauge Go Right-Handed DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Taking advantage of precise, repeatable thread inspection and robust hardened gauge steel construction ensures consistent quality control for metric fine threads; combined with conformity to DIN 13 (6g) this reduces inspection uncertainty and supports smooth production flow. Order the thread ring gauge M42 × 1 mm directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M42 × 1 mm — hardened limit gauge (right‑hand) by Metav IndustryLine The thread ring gauge M42 × 1 mm is a hardened limit gauge designed for verification of right‑hand metric ISO fine threads in production and quality assurance environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M42 × 1 mm metric fine threads Reliable inspection for metric fine threads A dedicated limit gauge such as this one provides a fast, repeatable method for pass/fail checks on threaded components. Built in hardened gauge steel, the tool resists wear during repeated engagement, preserving the reference form over long inspection runs. The specification DIN 13 with tolerance class 6g aligns the gauge to accepted metric ISO fine‑thread practice, giving engineers and inspectors a clear, standardised basis for decision‑making in the workshop or at the inspection bench. Designed for industrial use and repeatability The compact, solid construction and a mass of 0.91 kg contribute to stable handling and consistent engagement during thread trials. As a limit gauge for right‑hand metric fine threads, it is intended for routine quality checks where speed and unambiguous results matter. By converting threaded features into a simple pass or fail outcome, the gauge minimises downtime in production lines and reduces the scope for subjective judgement in final inspection, supporting efficient process control and traceable quality protocols. Standards, material and long‑term value Manufactured from hardened gauge steel, the component is dimensionally stable and suited to repeated use in shopfloor and laboratory scenarios. The tolerance marking 6g denotes the acceptance band for external threads under DIN 13, which helps technicians interpret results against the metric ISO system without additional conversion. Regular inspection of the gauge and correct storage will preserve accuracy and extend service life, making it a cost‑effective instrument for long term quality assurance. For reliable thread verification choose the Metav IndustryLine ring gauge from Metav Werkzeuge — for advice, order assistance or specification queries contact Metav Werkzeuge and secure reproducible, standards‑based thread checks at your facility. Technical data Article number: M315.242.4 GTIN: 4054469126593 Weight: 0.91 kg Facts Thread: M42 × 1 mm Tolerance class: 6g Standard: DIN 13 Special features Material: gauge steel, hardened Application: metric ISO fine threads, right‑hand Category: gauges / thread gauges FAQ What is the primary use of this gauge? The thread ring gauge M42 × 1 mm by Metav IndustryLine is used for pass/fail verification of right‑hand metric ISO fine threads, enabling quick acceptance checks during production and inspection. Which standard and tolerance does the gauge follow? This Metav IndustryLine ring gauge is manufactured to DIN 13 and marked to tolerance class 6g, matching common requirements for metric fine threads. What material is the gauge made from and how does that affect performance? Made from hardened gauge steel, the gauge offers high wear resistance and dimensional stability, maintaining reliable mating form over repeated inspections. How is repeatability ensured during routine checks? Repeatability is supported by the limit‑gauge principle and the hardened construction; the ring gauge provides immediate, unambiguous pass/fail outcomes suitable for inline quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42x1 Thread Ring Gauge Go, Metric ISO Fine Thread Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened go ring gauge that enforces DIN 13 tolerance class 6g for consistent thread acceptance, combining traceable inspection and durable construction for reliable production control. Order directly via Metav Werkzeuge or consult our advisors for application guidance. Go ring gauge M42 x 1 mm — DIN 13, 6g (Metav IndustryLine) The Go ring gauge M42 x 1 mm is a precision inspection gauge for confirming conformity of metric ISO fine external threads in production and incoming‑goods inspection. Hardened gauge steel construction DIN 13 tolerance class 6g For M42 x 1 mm ISO fine thread Right‑hand thread, go (pass) gauge Ensure first‑off quality with a go/no‑go approach The hardened gauge steel body and the DIN 13 specification (tolerance 6g) make this go ring ideal for a clear, objective pass criterion during serial production. By using a dedicated go ring gauge, measurement becomes an immediate Go/No‑Go decision, eliminating interpretation variance and reducing rework. The gauge verifies thread form and basic dimensional acceptance for mating external threads, supporting fast throughput in assembly and final inspection operations without the need for elaborate measuring setups. Built for repeatability and workshop endurance Manufactured from hardened gauge steel, the ring resists wear and maintains dimensional stability under routine handling. The right‑hand thread configuration ensures compatibility with standard metric mating parts, and the compact, single‑function design removes ambiguity from pass checks. The modest mass (0.9 kg) provides a robust feel while remaining convenient for bench inspection. Used as part of a control plan, this ring gauge contributes to reproducible results and reduces downtime caused by ambiguous measurements. Practical fit into quality systems and traceability As a simple inspection tool, the gauge integrates easily into quality workflows: stationing the ring at incoming inspection, toolmaking or final assembly streamlines acceptance testing. The clear DIN reference (DIN 13) and the marked size aid traceability in audit situations; the SKU and GTIN facilitate stock management and order replenishment. For regulated environments, the gauge supplies a deterministic check that complements more detailed metrology when required, thereby serving as an efficient front‑line control device. For robust and repeatable thread checks, specify the Metav IndustryLine go ring gauge and contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.142.4 GTIN: 4054469124933 Weight: 0.9 kg Nominal size: M42 x 1 Standard: DIN 13, 6g Tariff number: 90173000 Facts Thread size: M42 x 1 mm Tolerance class: 6g Mass: 0.9 kg Special features Material: hardened gauge steel Type: go ring gauge (pass) Thread direction: right‑hand Intended for metric ISO fine threads FAQ What does the "6g" mark mean for the gauge? The 6g marking denotes the tolerance class in accordance with DIN 13 for metric ISO threads; the go ring gauge is manufactured to this tolerance to verify conformity of mating external threads. Can this gauge be used in production inspection? Yes, the Metav IndustryLine go ring gauge M42 x 1 mm is designed for production and incoming‑goods checks where a quick pass criterion is required. Is the ring suitable for right‑hand or left‑hand threads? This particular gauge is specified for right‑hand threads and is intended to check mating external metric ISO fine threads. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, which provides wear resistance and dimensional stability, ensuring reliable repeatability over many inspection cycles. How is the gauge identified for stock and ordering? The product is listed under SKU M315.142.4 with GTIN 4054469124933, which assists in procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42x2 Limit Thread Plug Gage For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of a precise, standards-compliant inspection tool: the hardened gauge steel body and DIN 13, 6H tolerance ensure reliable go/no-go control for metric fine threads, while the compact weight simplifies handling in the workshop; order the limit thread plug gauge directly via Metav Werkzeuge or ask our consultants for application advice. Limit thread plug gauge M42 x 2 mm (right-hand) — Metav IndustryLine The Limit thread plug gauge M42 x 2 mm is a right-hand metric ISO fine-thread inspection gauge designed for quick verification of internal threads in production and quality control environments. Hardened gauge steel construction Conforms to DIN 13, 6H tolerance Right-hand metric fine thread M42 x 2 Designed for go/no-go inspection Guaranteed conformity for metric fine threads A dedicated limit thread plug gauge brings clarity to routine inspection: the M42 x 2 mm size targets ISO fine-threaded bores, while the DIN 13, 6H tolerance specifies the acceptance limits for mating parts. Using a dedicated plug gauge accelerates the decision process at incoming inspection or final assembly by giving an immediate pass/fail result. This direct verification reduces rework and rejects, supporting faster throughput without sacrificing documented conformity. Durable design for repetitive use and consistent results Manufactured from hardened gauge steel, the gauge is built for repeated contact with production components and resists wear that would otherwise shift the acceptance limits. The robust construction, combined with defined go/no-go ends, delivers reproducible checks across shifts. Weight and balance have been considered to facilitate single-person handling during process checks, and the compact geometry aids accessibility in assemblies where space is restricted. Simple integration into quality workflows A limit plug gauge is a pragmatic tool for inline or bench inspection: it complements measurement equipment by offering a tactile and rapid control step before dimensional measurement. When used as part of a documented quality routine, the gauge supports traceability and audit readiness. For workshops seeking dependable standards compliance with minimal training effort, this gauge provides a low-friction method to uphold thread quality and assembly fitment. Choose the Metav IndustryLine limit thread plug gauge for reliable thread inspection and contact Metav Werkzeuge in Emmerich for ordering or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.042.7 GTIN: 4054469123288 ECLASS: 21170235 Numbers / Core technical data Thread size: M42 x 2 mm Pitch: 2 mm Weight: 0.65 kg Tariff number: 90173000 Materials / Special features Material: hardened gauge steel Standard: DIN 13, 6H Right-hand metric ISO fine thread Limit (go/no-go) plug gauge design FAQ What thread size and pitch does this gauge check? The limit thread plug gauge checks a right-hand M42 x 2 mm metric fine thread, matching the specified 2 mm pitch for ISO fine-threaded bores. Is the gauge suitable for production line checks? Yes, the Metav IndustryLine limit plug gauge is designed for rapid go/no-go verification and is suitable for inline or bench inspection to support production quality control. Which standard does the gauge comply with? The tool is manufactured to DIN 13, 6H, providing defined acceptance limits for mating threads in accordance with metric ISO norms. What is the construction material and why does it matter? Made from hardened gauge steel, the gauge offers wear resistance and dimensional stability, ensuring consistent pass/fail checks over many cycles. Can the gauge be used for both internal and external thread inspection? This particular item is a plug gauge intended for internal thread inspection; external threads require the corresponding ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42x2 Thread Go Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction and conformity to DIN 13, 6g for reliable checks of metric fine threads; order or request technical advice through Metav Werkzeuge for fast supply and specialist support. Thread ring gauge M42 x 2 mm — right‑hand metric ISO fine‑thread gauge by Metav IndustryLine The Thread ring gauge M42 x 2 mm is a right‑hand ring gauge designed for rapid verification of metric ISO fine threads in production and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g For metric ISO fine thread M42 x 2 Suitable for production and incoming inspection Consistent thread conformity for production control The ring gauge is manufactured to DIN 13 with tolerance class 6g, which establishes a clear reference for metric ISO fine threads. Using a standardised tolerance class ensures interchangeability and avoids subjective assessment on the shop floor: a single go/no‑go check confirms whether a threaded part meets the specified limits. This direct measurement approach reduces rework and simplifies pass/fail decisions during assembly and quality control, supporting leaner production processes and predictable part acceptance. Durable construction for repeated use in workshops Made from hardened gauge steel, the gauge resists wear and maintains dimensional stability under frequent handling. The robust material choice preserves the functional limits of the thread profile over numerous cycles, which translates into long service life and consistent measurement results. At 0.91 kg the component has sufficient mass for stable handling without unnecessary bulk, enabling quick mounting in inspection fixtures or manual checks at the workbench. Workflow compatibility and practical handling The design suits right‑hand metric threads and integrates easily into standard inspection routines. Clear identification via GTIN and the manufacturer SKU streamlines inventory and traceability in receiving and production departments. As a dedicated thread reference, the gauge complements optical and tactile inspection methods, providing a simple, quick control step that can be performed at the machine, at the inspection table or at goods‑in, thereby shortening feedback loops and reducing downtime. Standards conformity and traceability for quality assurance Supplied under the Metav IndustryLine range, the device supports certified production chains by referencing established standards rather than ad‑hoc tolerances. The combination of normative conformity and a hardened construction makes this ring gauge a dependable tool for everyday quality assurance. For customers requiring documented traceability or specific certification steps, Metav Werkzeuge can advise on calibration services and supply documentation to fit internal quality systems. Choose the Metav IndustryLine thread ring gauge for assured thread conformity — contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data SKU: M315.242.7 GTIN: 4054469126616 Weight: 0.91 kg Material: Gauge steel, hardened Thread: M42 x 2 Norm: DIN 13, 6g Tariff number: 90173000 Brand: Metav IndustryLine Core specifications Nominal thread: M42 x 2 Tolerance class: 6g Orientation: Right‑hand Mass: 0.91 kg Features Hardened gauge steel construction Intended for metric ISO fine thread inspection Category: Thread gauges / gauges for production and incoming inspection FAQ What thread size does this gauge check? The ring checks M42 x 2 mm metric ISO fine threads in a right‑hand orientation and is marked accordingly. Which tolerance class is applied to the gauge? The instrument is manufactured to DIN 13 with tolerance class 6g, providing a standard reference for compatibility with metric ISO threads. Is the gauge suitable for production use? Yes, the hardened gauge‑steel construction and normative tolerance make it suitable for routine production and incoming‑goods inspection. How is the product identified for stock and traceability? Identification uses the SKU M315.242.7 and GTIN 4054469126616 to simplify inventory and traceability in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42x2 Thread Go Ring Gauge Metric ISO Fine Thread Right Hand DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Compact, reliable thread inspection for metric fine threads: the hardened gauge steel construction, DIN 13 tolerance 6g, and the M42 × 2 mm right‑hand format ensure fast go/no‑fit decisions at the control station; order the ring gauge directly via Metav Werkzeuge or contact our consultants for specification advice. Thread ring gauge M42 × 2 mm Go — metric ISO fine thread, DIN 13 (6g) Thread ring gauge M42 × 2 mm Go is a hardened ring gauge designed to verify metric ISO fine threads in production and incoming inspection, suited to right‑hand threads and DIN 13 tolerancing M42 × 2 mm Go ring gauge DIN 13 tolerance class 6g Hardened gauge steel construction Right‑hand metric ISO fine thread Precision assurance for fine metric threads A ring gauge of this design provides a quick, binary check of internal threads: the Go condition confirms that the thread is within the acceptance limits defined by DIN 13 and the 6g tolerance class. The gauge is manufactured from hardened gauge steel, which keeps the measuring profile stable under repeated use and reduces wear‑related drift. For workshops and inspection benches handling metric ISO fine threads, this type of gauge removes the guesswork from assembly checks and speeds up pass/fail decisions during serial production. Practical benefits in the inspection workflow Using a dedicated ring gauge simplifies process control and cuts non‑conforming parts before they reach assembly. The compact format for M42 × 2 mm is easy to handle and, at approximately 0.8 kg, balances robustness with operator comfort during repetitive inspections. The hardened gauge steel body resists deformation and maintains the reference form over many cycles, which reduces recalibration frequency and downstream rework. In short, the tool translates technical tolerancing into a straightforward production control step, improving throughput and consistency. Compatibility, limitations and integration into quality systems The component complies with the metric ISO fine‑thread system and is specified to DIN 13 with a 6g tolerance, so the Thread ring gauge M42 × 2 mm Go integrates directly into standard inspection routines for threaded parts. Note that this unit represents the Go (acceptance) gauge; a matching No‑Go gauge is required where full two‑limit control is mandated. For traceable documentation or integration into quality management procedures, Metav Werkzeuge can advise on complementary gauges and handling practices to match inspection plans and record keeping. Contact Metav Werkzeuge today for specification advice and to confirm suitability of the M42 × 2 mm Go ring gauge from the Metav IndustryLine range Technical data Article number: M315.142.7 GTIN: 4054469124957 Brand: Metav IndustryLine Facts Thread size: M42 × 2 mm Tolerance class: 6g Weight: 0.8 kg Tariff code: 90173000 Special features Material: hardened gauge steel Thread type: right‑hand, metric ISO fine thread Standard: DIN 13 Function: Go (acceptance) ring gauge Categories: Gauges, Measuring devices (Lehren, Messstifte) FAQ What does the Go designation mean for this ring gauge? The Go designation indicates that the gauge checks whether an internal thread meets the lower and nominal limits for acceptance; the ring passes if it screws on correctly. For full two‑limit control, a corresponding No‑Go gauge is used in addition to the Go ring gauge. Is this gauge suitable for metric ISO fine threads? Yes; the ring is specified for metric ISO fine threads and conforms to DIN 13 with tolerance class 6g, making it suitable for standard fine‑thread inspections. What material is the gauge made from and why does it matter? The ring is manufactured from hardened gauge steel, which preserves the thread profile under repeated use and reduces dimensional drift, maintaining reliable inspection results over time. Does the product include traceable calibration documentation? Calibration documentation is not specified for this item by default. If traceable calibration is required, please consult Metav Werkzeuge to arrange calibration services or to confirm supplied certification. How should the gauge be used to avoid damage and ensure longevity? Use clean, dry threads and avoid forcing the gauge; screw it on by hand to check fit. Store the gauge in a protective environment to limit corrosion and mechanical damage; consult Metav Werkzeuge for recommended storage and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42x3 Thread Gauge Ring For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 compliance, hardened gauge‑steel construction and exact M42 x 3 mm sizing for consistent thread verification; order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed Thread ring gauge M42 x 3 mm — DIN 13 class 6g (Metav IndustryLine) The Thread ring gauge M42 x 3 mm provides a robust solution for quick verification of external metric ISO fine threads in production and inspection environments Precision to DIN 13 class 6g Hardened gauge steel construction For M42 x 3 mm metric fine thread Consistent verification for metric fine threads A ring gauge designed to check external threads offers a fast, objective method to confirm conformance with DIN 13. The M42 x 3 mm sizing and 6g tolerance class mean the tool is matched to standard metric fine-thread specifications, allowing operators to determine acceptability without time‑consuming measurements. By using a dedicated inspection gauge rather than purely dimensional checks, repeatability in routine quality control improves and the number of ambiguous rejects is reduced. This practical approach supports lean production by shortening inspection cycles and ensuring assemblies engage correctly first time. Durable construction for workshop use Made from hardened gauge steel, the ring gauge is built to withstand repetitive use in busy workshops and inspection benches. The material choice gives high wear resistance and stable geometry under normal use, which preserves the gauge's functional limits over many cycles. At approximately 0.91 kg, the component presents a solid, balanced feel that suits both handheld verification and bench procedures. The right‑hand thread form is compatible with common external threads in mechanical assemblies, delivering straightforward pass/fail assessment for manufacturers and maintenance teams alike. Integration into quality workflows and traceability The inspection tool is intended as a control instrument within a documented quality system: apply the gauge during final checks or incoming goods inspections to prevent assembly issues downstream. Identification details such as SKU and GTIN facilitate inventory management and traceability of inspection equipment across company locations. Using a standardised DIN 13 ring gauge simplifies communication with suppliers and audit bodies, and supports consistent decision criteria across shifts and sites. Metav IndustryLine’s offering is positioned to supply practical, industry‑grade inspection aids that fit established production and quality routines. Choose the Metav IndustryLine M42 x 3 mm ring gauge for dependable thread inspection and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for personalised advice and prompt supply Technical data Article number: M315.242.8 GTIN: 4054469126623 Weight: 0.91 kg Material: hardened gauge steel Standard: DIN 13, 6g Thread size: M42 x 3 mm Tariff number: 90173000 Facts Thread form: metric ISO fine thread Tolerance class: 6g Hand: right-hand thread Category: gauges (thread ring) Special features Designed for external thread verification Robust, wear-resistant construction Suitable for workshop and inspection bench use SKU: M315.242.8 FAQ What is this gauge used for? This ring gauge verifies external metric ISO fine threads, specifically M42 x 3 mm, to the DIN 13 standard and class 6g, providing a quick pass/fail inspection method. Which materials is the gauge made from? The inspection tool is manufactured from hardened gauge steel, chosen for dimensional stability and resistance to wear during repeated use. Is the thread form right- or left-handed? The gauge is produced for right‑hand threads and is intended to test corresponding external threaded parts. How should the ring gauge be applied in quality control? Use the gauge during incoming inspection, in‑process checks or final inspection to confirm that external threads fall within the specified 6g tolerance; it serves as an objective control point in documented quality procedures. Can this gauge be used for production setting or only for inspection? Primarily intended for inspection and verification, the ring gauge can also be used to validate tooling or reference parts when setting up production operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42x4.5 Thread Limit Master Plug Gauge Right-Handed, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Robust limit acceptance for metric ISO threads through hardened construction and DIN conformity; the combination of long-term wear resistance and clear identification keeps inspection routines efficient. Order the limit plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit plug gauge M42 x 4.5 mm — metric ISO thread, DIN 13 (6H) by Metav IndustryLine A Limit plug gauge M42 x 4.5 mm designed for fast go/no-go verification of metric ISO standard threads in production and inspection environments. Hardened gauge steel for high wear resistance Conforms to DIN 13 (6H) tolerance for metric threads Right-hand M42 x 4.5 mm limit plug gauge Precise acceptance testing to reduce rework A dedicated limit plug gauge provides an immediate, objective decision in quality control: pass or fail. The marked M42 x 4.5 mm size and the DIN 13 (6H) tolerance class make this tool suitable for verifying the dimensional acceptance of mating parts and threaded bores. Because the gauge is manufactured to a standard tolerance, process planners gain a reproducible inspection step that reduces ambiguous measurements and lowers the risk of downstream rework or assembly failures. Durable build that sustains high throughput Constructed from gauge steel and supplied in a hardened finish, the instrument is intended to withstand frequent use on the shop floor. The compact mass of 0.95 kg contributes to handling stability while remaining portable between inspection points. Clear identification via SKU M315.042 and the GTIN 4054469123257 assists in inventory control and traceability, so calibration intervals and replacement planning can be integrated into maintenance schedules with minimal administrative effort. Streamlined inspection workflows and operator benefits Designed as a simple go/no-go device for right-hand thread checks, the gauge removes interpretation from routine checks and speeds up throughput at control stations. Its single-purpose design supports rapid sampling in batch inspection, complementing more detailed measurement instruments when required. As part of a calibrated inspection plan, the gauge aids auditors and operators in demonstrating compliance with internal control procedures and industry standards. For dependable thread acceptance in production, request the Metav IndustryLine limit plug gauge (SKU M315.042) from Metav Werkzeuge; contact the Emmerich team by email at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data SKU: M315.042 GTIN: 4054469123257 Weight: 0.95 kg Thread size: M42 x 4.5 mm Material: Gauge steel, hardened Standard: DIN 13, 6H Customs tariff number: 90173000 Facts ECLASS: 21170235 Category: Lehren; Messstifte Special features Right-hand metric ISO thread gauge Designed for go/no-go acceptance testing Compact, single-purpose inspection instrument FAQ What tolerance class does the gauge check? The limit plug gauge checks metric threads to the DIN 13 (6H) tolerance class as supplied with the Metav IndustryLine item M315.042. Is this gauge suitable for right-hand threads only? Yes, the tool is manufactured for right-hand metric ISO threads and is designated specifically as M42 x 4.5 mm for that orientation. What material and treatment does the gauge have? The gauge is made from gauge steel and is hardened to provide wear resistance during repeated acceptance tests. How is the gauge identified for inventory and traceability? Identification is provided via SKU M315.042 and GTIN 4054469123257, supporting stock control and traceability in inspection records. Can this gauge be used for rapid production sampling? Yes, the instrument's go/no-go design is intended for fast sampling in batch inspections, complementing more detailed metrology equipment where required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42x4.5 Thread Ring Gauge, Go, DIN 13 6g, Right-Hand - Metav IndustryLine
Taking advantage of hardened gauge steel, clear compliance with DIN 13 6g and a dedicated Go acceptance function, this ring gauge delivers dependable thread verification for series production and incoming inspection. Order the thread ring gauge M42 x 4.5 mm directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M42 x 4.5 mm 'Go' — hardened gauge steel, DIN 13 (Metav IndustryLine) The thread ring gauge M42 x 4.5 mm is a precision Go ring for quick verification of external metric ISO threads in workshops and production quality control. Hardened gauge steel construction DIN 13, tolerance class 6g For M42 x 4.5 mm metric ISO threads Go ring for right‑hand threads Consistent pass/fail inspection for production control The ring gauge is intended as a rapid Go/no‑Go check to confirm that external threads meet the specified profile and dimensional tolerance. Made from hardened gauge steel, the device resists wear and preserves the calibrated gauge form over many cycles, which reduces reworking and scrap. Compliance with DIN 13 and the 6g tolerance class ensures measurability against a recognised standard; this makes the gauge suitable for routine in‑line checks in metalworking and assembly environments. The robust construction and compact form factor support frequent handling in production without loss of repeatability. Clear function and handling that speeds up quality workflows Designed as a Go ring for right‑hand metric threads, the tool enables immediate accept/reject decisions at the production bench. The simple mechanical check eliminates interpretation delays: a part that enters the ring freely is accepted; a part that binds is flagged for further examination. This straightforward approach shortens control cycles and maintains throughput, while the gauge’s hardened material keeps its acceptance criteria stable. Where traceable conformity is required, the ring gauge serves as a reliable first‑line verification device to complement dimensional measuring equipment. Suitable applications and what it means for procurement This ring gauge is intended for inspection of external M42 x 4.5 mm metric ISO threads in fabrication, maintenance, and incoming‑goods inspection. The component’s durability and adherence to standard tolerances make it appropriate for both small‑batch specialist shops and larger manufacturing lines that require consistent, repeatable checks. Choosing a standardised Go ring simplifies spare‑part management and integrates smoothly with existing quality plans and process documentation, helping procurement achieve a balance of longevity and operational efficiency. For procurement or technical advice on integrating the Metav IndustryLine Go ring gauge into existing inspection routines, contact Metav Werkzeuge in Emmerich for personalised support and reliable European delivery Technical data Article number: M315.142 GTIN: 4054469124926 Weight: 1.5 kg Measurements & standards Thread: M42 x 4.5 mm Standard: DIN 13 Tolerance class: 6g Tariff code: 90173000 Materials & features Material: gauge steel, hardened Type: Go ring gauge, right‑hand thread Category: Thread gauges / Go rings FAQ What is the intended use of this ring gauge? The thread ring gauge M42 x 4.5 mm (Metav IndustryLine, SKU M315.142) is designed for Go checks on external metric ISO threads to provide immediate pass/fail verification during production or incoming inspection. Which standard and tolerance does the gauge comply with? The gauge is manufactured to DIN 13 and conforms to tolerance class 6g, making it suitable for standard metric ISO external thread inspection. What material is the gauge made from and why does that matter? The gauge is made of hardened gauge steel, which minimises wear and maintains dimensional stability, ensuring consistent inspection results over prolonged use. Is this gauge for right‑hand or left‑hand threads? This model is a Go ring for right‑hand threads and is intended specifically for M42 x 4.5 mm metric ISO external threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42×1.5 Limit Thread Go Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of fast conformity checks, a hardened gauge-steel construction and the DIN 13, 6H tolerance class for reliable thread verification; order the limit thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed Limit thread plug gauge M42 x 1.5 — Go/No‑Go metric ISO fine thread, right‑hand A Limit thread plug gauge M42 x 1.5 designed for quick verification of metric ISO fine threads in production and inspection environments Metric ISO fine thread M42 x 1.5 Hardened gauge steel construction DIN 13 tolerance class 6H Right‑hand thread verification Quicker pass/fail decisions with industrial accuracy A go/no‑go plug provides an immediate, unambiguous assessment of thread conformity, turning complex dimensional checks into a simple tactile verification. The combination of the M42 x 1.5 geometry and the DIN 13, 6H tolerance ensures conformity to established metric standards, which reduces the need for elaborate measuring steps. By using a limit plug, nonconforming parts are identified at the earliest stage, lowering rework rates and protecting downstream processes. The visible and tactile result accelerates inspection throughput while maintaining traceable quality control. Robust construction for regular workshop use Manufactured from hardened gauge steel, the instrument resists wear and maintains functional limits over repeated use. The right‑hand thread geometry and compact mass promote ergonomic handling during repetitive checks; the tool’s mass of 0.62 kg contributes to a balanced feel without compromising durability. Built as a go/no‑go limit gauge, it requires no power or electronics, which minimises downtime and simplifies storage and transport. This mechanical simplicity supports consistent results across multiple operators and shifts. Seamless fit into process control and documentation This limit gauge is suitable for inline inspection, final checks and sampling plans where fast decisions are essential. As a mechanical reference, it complements dimensional measurement systems and visual inspection routines, helping to enforce a pass/fail criterion directly on the shop floor. The article number and identifying marks make traceability straightforward within lot records and inspection logs, supporting consistent audit trails and conformity statements. For companies seeking efficient routine checks, the plug gauge is a practical, low‑maintenance solution that integrates with existing quality workflows. For specification advice or to request supply of the Metav IndustryLine limit thread plug gauge M42 x 1.5 (SKU M315.042.6), contact Metav Werkzeuge for detailed consultation and order handling Technical data Article number: M315.042.6 GTIN: 4054469123271 Weight: 0.62 kg Material: Gauge steel, hardened Thread: M42 x 1.5 Direction: Right‑hand Standard: DIN 13, 6H Customs tariff number: 90173000 Specifications Nominal diameter: 42 mm Thread pitch: 1.5 mm Tolerance class: 6H (DIN 13) Mass: 0.62 kg eClass: 21170235 Special features Go/no‑go (limit) plug gauge design Hardened surface for wear resistance Intended for production and inspection use Category: Thread gauges / Plug gauges Suitable for metric ISO fine threads FAQ What does a go/no‑go plug gauge check? A go/no‑go plug gauge checks whether the internal thread falls within the acceptable limits; the Limit thread plug gauge M42 x 1.5 confirms pass when the GO end enters and flags fail when the NO‑GO end engages. Which standard does this gauge conform to? The gauge is manufactured for metric ISO threads and complies with DIN 13, tolerance class 6H, ensuring compatibility with standard metric thread specifications. What material is the gauge made from and why does it matter? The instrument is made of hardened gauge steel, chosen for abrasion resistance and dimensional stability so that the functional limits remain reliable over many inspection cycles. Is this gauge suitable for production floor use? Yes; the plug gauge is designed for rapid, repeatable pass/fail checks in production and inspection environments and integrates with routine quality control procedures. How is the part identified for traceability? Identification is provided via the article number M315.042.6 and the GTIN, which support labelling in inspection records and enable traceable documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42×1.5 Thread Go Ring Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Reliable verification for M42 threads: hardened gauge steel, DIN 13 tolerance class 6g and a compact form factor ensure repeatable, fast thread checks on the shop floor. Combine durable construction with clear traceability to reduce inspection time and minimise rework. Order this ring or consult Metav Werkzeuge for specification matching. Thread ring gauge M42 x 1.5 mm (Go) — DIN 13, 6g (Metav IndustryLine) Thread ring gauge M42 x 1.5 mm (Go) is a precision inspection gauge for verifying metric ISO fine threads (right‑hand). Go ring for M42 x 1.5 mm metric fine threads Conforms to DIN 13 tolerance class 6g Hardened gauge steel for long service life Traceable SKU M315.142.6 and GTIN 4054469124940 Faster, standards‑based checking for production workflows A dedicated go ring for M42 x 1.5 threads shortens inspection cycles by giving an immediate conform/non‑conform result. Manufactured to DIN 13 with tolerance class 6g, the gauge translates a complex tolerance concept into a single, reliable test step. Using a ring gauge removes ambiguity from thread assessment: a pass indicates that the threaded feature meets the specified form and pitch within the tolerance band, enabling quicker release of parts and reducing hold‑ups at downstream operations. The compact design supports efficient bench or line use while preserving measurement integrity. Durable materials that deliver consistent measurements Made from hardened gauge steel, the ring is designed to withstand frequent handling and contact without premature wear. Hardened construction maintains the reference profile, which in turn preserves repeatability and reduces the need for frequent replacement. At 0.7 kg the component is robust yet manageable for workshop staff, and the right‑hand orientation matches standard production threads. The durable material choice and precise machining combine to give a low total cost of ownership through extended service life and fewer process interruptions. Traceability, integration and audit readiness Traceable identifiers such as SKU M315.142.6 and GTIN 4054469124940 simplify inventory management and quality documentation. The gauge’s conformity to established norms makes it straightforward to reference during inspections and audits, while clearly stated specifications aid purchasing and tool matching. For manufacturers seeking to standardise inspection procedures, this ring integrates cleanly into existing quality plans and tool libraries, supporting reproducible results and simpler supplier communication. Contact Metav Werkzeuge for technical matching or to secure this Metav IndustryLine go ring for precise M42 thread inspection; specification advice and ordering support are available from Metav Werkzeuge in Emmerich Technical data Article number: M315.142.6 GTIN: 4054469124940 Weight: 0.7 kg Material: Gauge steel, hardened Facts Thread: M42 x 1.5 Norm / tolerance: DIN 13, 6g Tariff number: 90173000 Special features Type: Go (good) ring gauge Thread direction: Right‑hand Category: Thread gauges Brand: Metav IndustryLine FAQ What does a "Go" ring gauge indicate for a thread? A Go ring gauge confirms that the external thread form and pitch are within the allowed tolerance; the part must enter the go gauge without binding for a pass, as used for the Metav IndustryLine M42 x 1.5 go ring (SKU M315.142.6). Is this gauge suitable for fine metric threads? Yes, the gauge is specified for metric ISO fine threads with the M42 x 1.5 designation and is manufactured to DIN 13 for tolerance class 6g, making it suitable for fine thread verification. How does the hardened gauge steel benefit everyday use? Hardened gauge steel maintains the reference profile under repeated contact, so inspections remain reliable over time and replacement intervals are extended, ensuring stable measurement results. Can this ring gauge be used in serial inspection on the shop floor? The robust construction and normative specification (DIN 13, 6g) make it appropriate for routine shop‑floor checks and rapid pass/fail assessments in production environments. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42×1.5 Thread Ring Gauge Metric ISO Fine Right-Handed DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge steel construction, compliance with DIN 13 (6g) and a robust build for reliable thread acceptance checks; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge M42 x 1.5 mm — hardened gauge steel, DIN 13 The Thread Ring Gauge M42 x 1.5 mm is a right‑hand limit gauge for inspection of metric ISO fine threads, intended for incoming inspection and process control in production environments Hardened gauge steel construction Compliant with DIN 13, tolerance 6g Designed for M42 x 1.5 metric fine threads Consistent acceptance criteria for reliable production A hardened thread ring provides an immediate, unambiguous check of a thread's conformity. Built to DIN 13 with a 6g tolerance class, this gauge defines the limit that a threaded part must meet to be accepted. The clear pass/fail principle of a limit gauge reduces subjective judgement at the bench, supports faster quality decisions and helps avoid production stoppages caused by wrongly accepted threads. Use of a standardised gauge ensures interchangeability across suppliers and assemblies, supporting traceable quality control. Durable construction for repeatable measurements Made from hardened gauge steel, the component is resistant to wear and preserves its checking dimensions over many cycles. The solid mass and geometry — reflected in a weight of approximately 0.91 kg — contribute to stable handling and minimise distortion while engaging the thread. That durability translates into longer periods between verifications and lower life‑cycle cost for inspection tooling. For workshops and inspection stations that require dependable everyday performance, the gauge offers a robust alternative to improvised checks. Practical benefits from a single, workshop‑ready tool Adopting a dedicated ring gauge streamlines inspection routines and documentation. The gauge can be deployed at incoming inspection, during in‑process checks or on final control benches to quickly separate conforming from non‑conforming parts. Procurement through an experienced supplier like Metav IndustryLine ensures access to consistent stock, documented identity (SKU and GTIN in the technical data) and sensible logistics from the Emmerich warehouse. Clear identification of the gauge simplifies inventory management and supports audit trails for serial or batch‑based production. Contact Metav Werkzeuge to confirm application suitability for this hardened M42 x 1.5 thread ring gauge or to arrange supply from our Emmerich warehouse (+49 2822 7131930, info@metav-werkzeuge.com) Technical data Article number: M315.242.6 GTIN: 4054469126609 Category: Thread ring gauge Facts Weight: 0.91 kg Thread: M42 x 1.5 mm Standard: DIN 13, 6g Materials & special features Material: hardened gauge steel Hand: right‑hand Intended use: metric ISO fine thread inspection FAQ What is the intended use of this ring gauge? The Thread Ring Gauge M42 x 1.5 mm is designed as a limit gauge for quick conformity checks of metric ISO fine threads in production and incoming inspection. Which tolerance and standard does the gauge follow? This gauge complies with DIN 13 and is manufactured to the 6g tolerance class, providing standardised acceptance criteria for M42 x 1.5 threads. How is wear managed and how long does the gauge last? Constructed from hardened gauge steel, the gauge offers extended service life under normal inspection routines; life expectancy depends on usage frequency and handling. Can the gauge be used across different suppliers and machines? Yes. Because it is manufactured to DIN 13 and the 6g class, the gauge supports interchangeability and consistent acceptance across suppliers and assemblies. How is the product identified for ordering and traceability? The gauge is listed under SKU M315.242.6 and GTIN 4054469126609 for clear procurement and traceability in stock and inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42×3 Thread Ring Gauge Go, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Benefit from rapid go/no‑go checks combined with standardised tolerances and hardened construction for reliable thread verification. The ring gauge ensures fast in‑process inspection and consistent conformity with DIN 13, supporting smoother production control — order the ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M42×3 GO (DIN 13) — Metric ISO fine thread, right‑hand — Metav IndustryLine Thread ring gauge M42×3 GO is a precision check gauge for metric ISO fine threads, designed for quick acceptance testing in manufacturing and inspection environments. Hardened gauge steel construction DIN 13 tolerance 6g conformity Suitable for M42×3 metric fine threads Faster conformity checks for threaded parts The GO ring enables immediate verification of thread acceptance: if the GO gauge enters the internal thread without play, the part meets the specified major and pitch diameter limits. Manufactured from hardened gauge steel, the tool resists wear and maintains dimensional stability during repetitive use, which reduces rework and rejects on the shop floor. Specified to DIN 13 with tolerance 6g, the gauge provides an objective basis for pass/fail decisions and supports consistent quality documentation. Practical inspection workflows and time savings Designed for straightforward shop use, this checking gauge shortens inspection cycles through a single, unambiguous test. The compact, balanced construction and the M42×3 sizing make it suitable for production lines and assembly stations that handle metric ISO fine threads. As a dedicated GO gauge the device removes the need for complex measurement setups during routine checks, enabling faster throughput without sacrificing traceability or repeatability. Durable design for repeated industrial use The combination of standard compliance and robust material choice contributes to long service life under normal workshop conditions. The hardened steel body withstands handling stresses and keeps the critical thread form intact, helping to preserve calibration intervals and reduce total cost of ownership. Right‑hand thread orientation is specified for compatibility with typical metric ISO fine‑threaded components, which supports straightforward integration into existing inspection protocols. Contact Metav Werkzeuge for application advice or to secure supply of this Metav IndustryLine thread ring gauge with DIN 13 conformity and hardened gauge steel construction Technical data Article number: M315.142.8 GTIN: 4054469124964 Brand: Metav IndustryLine Mass / Nominal size: M42×3 Facts Weight: 0.9 kg Tolerance class: 6g Standard: DIN 13 Tariff number: 90173000 Special features Type: GO thread ring gauge Thread direction: Right‑hand Material: Hardened gauge steel Application: Metric ISO fine threads FAQ Is this gauge suitable for M42×3 fine threads? Yes. The thread ring gauge M42×3 GO from Metav IndustryLine is made for metric ISO fine threads with the M42×3 nominal size. What standard and tolerance does the gauge comply with? The gauge is produced to DIN 13 and specified for tolerance class 6g, ensuring conformity with common metric thread inspection criteria. How is the ring used in production inspection? This GO ring is used as a go/no‑go acceptance check; a correct internal thread will accept the GO gauge, enabling fast routing of parts through quality control. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the tool is designed for repeated use and maintains dimensional stability under normal workshop handling. Can this gauge check left‑hand threads? No. The item is a right‑hand thread ring gauge and is intended for standard right‑hand metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42×3mm Go/No-Go Thread Plug Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Take advantage of proven conformity checking, hardened gauge‑steel durability and DIN 13, 6H accuracy to secure consistent thread inspection results; order the limit thread plug gauge directly via Metav Werkzeuge or consult our specialists for application-specific advice. Limit thread plug gauge M42 x 3 (right-hand) — hardened gauge steel, DIN 13, 6H | Metav IndustryLine A Limit thread plug gauge M42 x 3 designed for rapid verification of metric ISO fine threads in production and inspection environments Hardened gauge steel construction For M42 x 3 metric ISO fine threads Manufactured to DIN 13, 6H tolerance Right-hand thread limit plug gauge Consistent, standards-based thread inspection The instrument is a limit thread plug gauge intended to confirm whether internal threads meet the nominal form and tolerance class specified by DIN 13, 6H. By providing a straightforward go / no‑go result, the gauge reduces interpretation variance and shortens inspection cycles. The clear pass/fail check supports documented quality routines and helps to avoid rework by ensuring only conforming components continue along the production line. This is a practical solution for routine acceptance testing and in‑process control where reproducible results are essential. Durability and repeatability for shop‑floor use Constructed from gauge steel that has been hardened, the gauge offers high wear resistance and dimensional stability under repeated use. The mass of approximately 0.86 kg gives a tactile, stable feel during engagement, which aids correct seating in the thread without excessive handling. The robust material choice minimises maintenance and extends service intervals, making the tool suitable for regular use in workshop and inspection stations where longevity and repeatability contribute directly to lower operating costs. Simple implementation within quality systems Designed as a right‑hand thread limit plug for M42 x 3, the tool integrates easily into existing inspection routines. The physical go/no‑go principle means no special training is required beyond standard gauging practice: the go end must enter freely while the no‑go end must not; any deviation indicates non‑conformity. Clear labelling and a compact form factor facilitate storage and traceability within inspection logs. For traceable documentation, the item can be referenced by SKU during ordering and record keeping to ensure the exact gauge configuration is used. Request a quotation or technical consultation from Metav Werkzeuge to specify the optimal limit thread plug gauge (M315.042.8) for production inspection and quality assurance Technical data Article number: M315.042.8 GTIN: 4054469123295 Manufacturer: Metav IndustryLine Facts Thread size: M42 x 3 Weight: 0.86 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13, 6H Thread direction: right-hand Category: Lehren / Measuring plugs FAQ What tolerance class does the gauge check to? The gauge verifies threads to the DIN 13, 6H tolerance class; use the go/no‑go result to confirm compliance with that standard. Which thread is this limit plug gauge intended for? It is specified for metric ISO fine threads with the nominal size M42 x 3, right-hand. How is the gauge used in a production inspection? The go end must enter the internal thread freely and the no‑go end must not; any deviation signals a non‑conforming thread and triggers corrective action. What material and treatment ensure durability? The tool is made from hardened gauge steel, chosen for wear resistance and dimensional stability during repeated checks. How should the gauge be referenced in documentation? Reference the SKU M315.042.8 and the manufacturer line when logging inspection results to maintain traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M42×4.5 Thread Ring Gauge Right-Hand ISO Metric Pitch DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise rejection control and robust construction: the hardened gauge steel body and conformity to DIN 13 (tolerance 6g) provide repeatable thread inspection for production environments. Order this gauge directly via Metav Werkzeuge or consult our specialists for specification support. Thread ring gauge M42 x 4.5 (No‑go) — hardened gauge steel, DIN 13 (6g) — Metav IndustryLine The Thread ring gauge M42 x 4.5 (No‑go) verifies metric ISO right‑hand threads to DIN 13 and serves as a rejection gauge for quality control in machining and assembly processes. No‑go thread ring gauge for M42 x 4.5 Hardened gauge steel, robust and wear‑resistant Manufactured to DIN 13, tolerance 6g Reproducible thread inspection for production control A dedicated no‑go ring provides a clear, binary check that indicates whether a threaded part exceeds allowable upper limits. Manufactured to DIN 13 with tolerance 6g, this ring establishes an objective acceptance boundary for metric ISO threads. Used in routine control, the component delivers rapid pass/fail decisions that reduce downstream rework and help maintain consistent assembly fit. The specification is intelligible for quality engineers and operators alike, enabling traceable inspection without complex measurement routines. Durable material choice that lowers life‑cycle costs Constructed from hardened gauge steel, the ring is designed to withstand frequent engagement with threaded parts while preserving thread form and tolerance. The hardening process reduces wear and the need for frequent replacement, which directly contributes to lower life‑cycle costs in busy production lines. Robust construction also maintains measurement integrity over time, supporting reproducible results and minimising interruptions for maintenance or replacement. Practical integration into workshop quality procedures The no‑go ring is intended to be paired with the corresponding go gauge as part of a go/no‑go inspection routine or used independently where a fast rejection criterion is required. It suits workshop and shop‑floor applications in machining, bolt production and component assembly where metric ISO threads are standard. By anchoring thread checks in a simple physical limit, the device simplifies staff training and accelerates inspection throughput without sacrificing compliance with specified tolerances. Clear handling and specification benefits for procurement The compact, single‑purpose design eliminates setup time associated with instrument-based measurements, while the DIN 13 designation and M42 x 4.5 marking ensure unambiguous specification in procurement and quality documentation. Traceable labelling and the established standard make the gauge straightforward to reference in inspection plans, inspection reports and incoming goods checks, supporting efficient supplier acceptance and internal quality audits. Contact Metav Werkzeuge for expert advice on specifying this Metav IndustryLine no‑go thread ring gauge and secure reproducible thread control for production. Technical data Article number: M315.242 SKU: M315.242 GTIN: 4054469126586 Mass/thread: M42 x 4.5 Material: Lehrenstahl, hardened (hardened gauge steel) Standard: DIN 13, 6g Facts Tariff number: 90173000 ECLASS: 21170214 Right‑hand thread Category: Lehren; Messstifte Special features No‑go (rejection) ring gauge for thread control For metric ISO standard threads Hardened gauge steel construction Robust design for frequent use FAQ What is the intended use of this ring gauge? The Thread ring gauge M42 x 4.5 (Metav IndustryLine) is designed as a no‑go (rejection) gauge for swift pass/fail inspection of metric ISO right‑hand threads to DIN 13 with tolerance 6g. Can this gauge replace measurement instruments for routine checks? For routine production control, the no‑go ring gauge provides faster, repeatable rejection decisions than dimensional instruments; however, detailed metrological analysis still requires calibrated measuring tools. Is the ring suitable for use on coated or plated threads? The Metav IndustryLine no‑go ring gauge checks thread form; when coatings or platings are present, consideration of coating thickness in tolerance planning is recommended before relying solely on the ring for acceptance. How should the gauge be used in a go/no‑go system? Used alongside the corresponding go gauge, the no‑go ring establishes the upper limit; parts that fit the go gauge and do not engage the no‑go ring meet the specified acceptance window for threaded components. How is the specification documented for audits? The DIN 13 reference, tolerance class 6g and the marking M42 x 4.5 should be recorded in inspection plans and supplier documentation to ensure traceability of the acceptance criterion. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M44x1.5 Thread Gauge Ring For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Taking advantage of DIN 13 conformity, hardened gauge steel construction and the precise 6g tolerance class ensures consistent thread verification and fewer assembly rejects; order directly via Metav Werkzeuge or consult the Metav team for matching inspection workflows. Thread ring gauge M44 × 1.5 mm — DIN 13 tolerance class 6g, hardened gauge steel The thread ring gauge M44 × 1.5 mm is a hardened inspection ring designed for verification of metric ISO fine threads in right‑hand form, suitable for use in incoming inspection and production control. DIN 13 tolerance class 6g For metric ISO fine thread M44×1.5 Hardened gauge steel construction Right‑hand thread verification Consistent inspection that reduces rework and downtime The ring offers a reliable, standards‑based reference for production and incoming goods checks, combining DIN 13 conformity with a specified 6g tolerance class to deliver measurable pass/fail criteria. By using a calibrated, hardened reference element the inspection process becomes reproducible and less dependent on subjective judgement, which in turn reduces rework rates and contributes to smoother production sequences. The construction in hardened gauge steel provides long service life under workshop conditions and ensures dimensional stability during repetitive checks. Practical benefits in workshop and quality control routines As a dedicated thread inspection tool, this ring gauge enables rapid checks of metric ISO fine threads without complex fixturing. The compact, single‑piece design facilitates quick hand‑held verification at the bench or at the inspection station, supporting lean quality procedures and shortening throughput time. Measured against the standard, the ring simplifies go/no‑go decisions and supports traceable quality records when integrated into standard operating procedures and inspection logs. Technical integrity and material suitability explained Built from hardened gauge steel, the device resists wear and maintains profile integrity over many cycles, which is critical for repeatable results. The thread form and nominal dimension M44 × 1.5 mm match the metric ISO fine‑thread specification for right‑hand threads, making it appropriate for component families that use this thread series. The hardened material and precise manufacture reduce the risk of profile distortion during use, preserving the reference geometry that underpins accurate measurement and process control. How this gauge supports process confidence and supplier control Introducing a standardised thread reference into inspection routines strengthens supplier control and incoming goods inspection. With a clearly defined tolerance class and material robustness, the gauge functions as a trusted artefact in quality management: it helps to avoid ambiguous assessments, documents compliance with technical requirements and supports continuous improvement by providing objective data on thread production quality. The use of certified, durable gauges contributes to long‑term cost efficiency by reducing scrap and rework. Choose Metav IndustryLine’s hardened thread ring gauge for reliable thread verification and contact Metav Werkzeuge in Emmerich for tailored delivery and advice by email or phone Technical data SKU: M315.244.6 GTIN: 4054469126647 Material: Gauge steel, hardened Standard: DIN 13, 6g Thread: M44×1.5 mm Weight: 0.91 kg Core specifications Thread size: M44 × 1.5 mm Tolerance class: 6g Weight: 0.91 kg ECLASS: 21170214 Tariff number: 90173000 Materials & features Hardened gauge steel construction For metric ISO fine thread, right‑hand Category: Gauges / Inspection rings Suitable for production and incoming inspection FAQ What is this gauge used for? This ring gauge is used as a hardened reference to verify metric ISO fine threads with the nominal size M44 × 1.5 mm and to confirm conformity with DIN 13 tolerance class 6g. Is the gauge suitable for left‑hand threads? No, the device is manufactured for right‑hand thread verification; left‑hand threads require a dedicated left‑hand ring gauge. What material is the ring made from and why does it matter? Manufactured from hardened gauge steel, the ring maintains profile accuracy under repeated use, which is essential for reproducible inspection outcomes. Can this gauge be used for process control in production? Yes, the ring is intended for production and incoming inspection to support objective go/no‑go decisions and to help reduce assembly errors and rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com