Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M44x1.5 Thread Plug Gauge, Metric ISO Fine Thread, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge steel construction, precise DIN 13 / 6g tolerance and compact handling weight of 1.1 kg for reliable, repeatable in‑line inspection of metric fine threads. Combine durable design and defined acceptance criteria to reduce rework and speed quality control. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M44 x 1.5 mm 'Go' — DIN 13, 6g (Metav IndustryLine) The Thread ring gauge M44 x 1.5 mm 'Go' provides a clear go/no‑go control for right‑hand metric ISO fine threads, ideal for workshop and production checks. DIN 13 tolerance, class 6g For metric ISO fine thread M44×1.5 Hardened gauge steel construction Right‑hand 'Go' ring gauge Ensure production conformity with a simple acceptance check A dedicated go ring gauge is the fastest way to verify whether an internal thread falls within the specified ISO tolerance. The M44 x 1.5 mm size and 6g tolerance conform to DIN 13, giving process engineers and quality technicians a verifiable, repeatable standard for pass/fail decisions. By using a go‑only ring in routine inspection, threads that accept the gauge are accepted for assembly without time‑consuming measuring routines; this delivers clear throughput gains and reduces subjective interpretation. The result is measurable efficiency: fewer delays at final inspection and less rework on threaded components. Robust design for production environments Manufactured from hardened gauge steel, the ring offers long service life under frequent use and easy cleaning between shifts. The comparatively compact mass of 1.1 kg gives the gauge enough substance for stable handling while remaining manageable on the shop floor. The hardened finish resists wear from repeated engagement with threaded parts, which preserves the defined acceptance limit and extends the interval between any necessary maintenance. For component suppliers and maintenance workshops alike, this durability translates into lower lifetime cost and consistent measurement behaviour. Practical integration into quality workflows The ring is intended for direct acceptance testing of internal metric ISO fine threads and fits naturally into incoming inspection, in‑process checks and final control stations. As a right‑hand go gauge, it is used where a clear go decision is required: if the gauge enters the part without interference, the thread meets the nominal maximum material condition for the specified tolerance class. This straightforward verification helps standardise inspection steps across operators and shifts, improving traceability and reducing variability in assembly lines. The gauge’s compliance with established standards supports documentation practices and simplifies supplier audits. For assured thread control, request the M44 x 1.5 mm 'Go' ring from Metav Werkzeuge — contact our Emmerich team for technical guidance and delivery options at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M315.144.6 GTIN: 4054469124988 Weight: 1.1 kg Size: M44 x 1.5 mm Type: Go ring gauge, right‑hand Material: Gauge steel, hardened Standard: DIN 13, 6g Measurements / Accuracy Thread pitch: 1.5 mm Tolerance class: 6g (DIN 13) Customs tariff number: 90173000 Features / Application For metric ISO fine threads Intended for internal thread acceptance testing Suitable for production and workshop inspection Durable hardened construction Compact handling weight for shop use FAQ How is this ring gauge used in a production setting? A go ring gauge like the Thread ring gauge M44 x 1.5 mm 'Go' is presented to the internal thread; if it enters freely, the thread is accepted for assembly under the specified tolerance class. What tolerance and standard does the gauge verify? The gauge verifies the 6g tolerance class in accordance with DIN 13, ensuring conformity with metric ISO fine‑thread specifications. What material is the ring gauge made from and how durable is it? The ring is manufactured from hardened gauge steel, designed to withstand frequent use in workshop and production environments while maintaining the defined acceptance limit. Can this gauge be used for left‑hand threads or as a 'no‑go' gauge? This item is a right‑hand go ring gauge only; it is not suitable for left‑hand threads or for use as a no‑go checking tool. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M44×1 mm Go Thread Ring Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of precise, repeatable thread acceptance with a hardened gauge designed for metric ISO fine threads; the GO ring and DIN 13, 6g specification ensure fast in‑process checks and consistent conformity. Order or request application advice from Metav Werkzeuge to integrate this check into production control. Thread ring gauge M44 x 1 mm (GO) — metric ISO fine‑thread gauge, DIN 13/6g The Thread ring gauge M44 x 1 mm (GO) is a hardened ring gauge for quick verification of metric ISO fine internal threads (right‑hand), manufactured to DIN 13 with tolerance 6g. Hardened gauge steel construction DIN 13, 6g for metric ISO fine threads Right‑hand GO ring for quick verification Reliable thread acceptance at production speed A dedicated GO ring provides an immediate functional verdict: if the GO ring fully enters the internal thread, the part is considered acceptable for the specified tolerance class. Manufactured to DIN 13, 6g, this gauge converts dimensional specification into a rapid go/no‑go decision, saving cycle time during machining and assembly. The proven geometry of a GO ring removes ambiguity from visual checks and supports consistent decisions at the line, which reduces rework and keeps throughput steady. Durable design for repeated shop‑floor use Made from gauge steel, hardened, the ring resists wear and maintains its form under regular use, which ensures repeatable checks over long inspection runs. The solid construction also gives a reassuring feel during checking and helps maintain dimensional integrity across many engagement cycles. For routine quality control and maintenance rounds, the robust material and heat treatment deliver long service life and predictable behaviour under typical workshop conditions. Fits into quality assurance workflows with ease The ring’s specification for metric ISO fine threads and its right‑hand orientation make it suitable for standardised inspection plans and process documentation. As a tactile verification tool, the ring simplifies operator training and can be integrated into first‑piece inspection, in‑process checks and final acceptance routines. Using a dedicated gauge like this reduces measurement uncertainty compared with ad‑hoc methods, helping to lower scrap rates and strengthen documented compliance. For reliable thread verification and tailored application advice, contact Metav Werkzeuge — Metav IndustryLine specialists can recommend the most suitable gauge strategy for production or inspection tasks Technical data SKU: M315.144.4 GTIN: 4054469124971 Category: Lehren (gauges) Facts Thread size: M44 x 1 mm Weight: 1.1 kg Standard / Tolerance class: DIN 13, 6g Tariff code: 90173000 Special features GO ring (accept gauge) Right‑hand thread Material: gauge steel, hardened For metric ISO fine threads FAQ What does GO mean for this ring gauge? The GO designation indicates that the ring gauge is an acceptance gauge; if the Thread ring gauge M44 x 1 mm (GO) enters the tested internal thread without forcing, the thread meets the specified tolerance class. Is this gauge suitable for production line checks? Yes, the hardened construction and DIN 13, 6g specification make this gauge appropriate for rapid in‑process and final inspections in a production environment. Can the gauge be used on left‑hand threads? This particular item is manufactured for right‑hand threads; left‑hand checks require the corresponding left‑hand gauge. What material is the gauge made from and why does it matter? The ring is produced from gauge steel, hardened, which provides wear resistance and dimensional stability for repeated usage. How is conformity documented when using this type of gauge? The gauge supplies a go/no‑go result that can be recorded in inspection logs or quality records as part of standard acceptance procedures; include the SKU M315.144.4 in documentation for traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M44×1 mm Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of precise verification and robust construction for consistent thread inspection: the hardened gauge steel body and conformity to DIN 13 (6H) ensure reproducible results for M44 x 1 metric fine threads. Order the limit gauge plug directly via Metav Werkzeuge or consult our specialists for application advice. Limit Thread Gauge Plug M44 x 1 mm — Metric ISO fine thread, right‑hand (Metav IndustryLine) Limit Thread Gauge Plug M44 x 1 mm is a precision limit gauge designed to verify right‑hand metric ISO fine threads in workshop and inspection environments, providing a clear, repeatable check against standardised tolerances. Hardened gauge steel construction Manufactured to DIN 13 tolerance 6H For M44 x 1 metric ISO fine thread Right‑hand limit thread plug, 1.0 kg Reliable thread verification that reduces rework This precision limit plug offers a rapid, objective check of thread acceptance by referencing the DIN 13 tolerance class 6H. By matching the specified pitch and major/minor diameters for M44 x 1, the gauge supports consistent decisions on whether a threaded part meets the standard; this reduces costly rework and prevents non‑conforming assemblies reaching later production stages. The controlled geometry of the plug allows straightforward comparison against internal threads without complex measurement set‑ups, making it suitable for incoming inspection and in‑process checks in medium and heavy engineering shops. Durable construction for long service life and reproducible results Manufactured from hardened gauge steel, the limit plug resists wear under frequent use, maintaining critical dimensions and ensuring repeatable readings over time. The solid mass (approx. 1.0 kg) gives good handling stability during tactile checks and minimises movement that could lead to false readings. Surface finish and heat treatment are chosen to preserve the gauge form; as a result, inspection intervals lengthen and total cost of ownership is reduced compared with softer carry‑in gauges. Basic care — cleaning and dry storage — preserves accuracy and extends service intervals, supporting dependable quality control routines. Fast inspection workflow with clear conformity cues The plug delivers a straightforward pass/fail outcome when used as part of a thread inspection routine: either the mating thread accepts the gauge within the specified tolerance class or it does not. This immediacy benefits production throughput and quality documentation by shortening cycle times for inspection steps. Where a traceable record is required, the gauge can be combined with existing QC procedures to log acceptance rates or to trigger corrective actions when trends toward rejection appear. The simple physical test supports trained operators and quality technicians in maintaining process stability across batches and machine shifts. Choose the Metav IndustryLine limit thread plug for dependable M44 x 1 inspection and contact Metav Werkzeuge for rapid supply and expert application support from Emmerich. Technical Data Article number: M315.044.4 SKU: M315.044.4 GTIN: 4054469123301 Material: gauge steel, hardened Weight: 1.0 kg Standard: DIN 13, 6H Core technical data Thread size: M44 x 1 mm Tolerance class: 6H Orientation: right‑hand thread Tariff code: 90173000 eClass: 21170235 Special features Designed for metric ISO fine thread verification Category: Lehren; Messstifte Robust construction for repeated use Suitable for workshop and inspection applications FAQ What is this gauge used for? This limit thread plug is used to verify acceptance of M44 x 1 right‑hand metric ISO fine threads against DIN 13 (6H) tolerances during inspection and in‑process checks. Which material is the plug made from? The plug is manufactured from hardened gauge steel, chosen for wear resistance and dimensional stability under repeated use. Can this gauge replace measurement with a caliper or micrometer? The limit plug provides a quick pass/fail assessment for thread conformity; for full dimensional analysis of thread form and pitch, complementary measuring tools and gauges are recommended alongside the plug. What is the article number for ordering? Order reference: Article number / SKU M315.044.4 (GTIN 4054469123301) via Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M44×1 Thread Ring Gauge Go Only Metric Fine Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of DIN 13 tolerance, hardened gauge steel and a compact, workshop-friendly layout for reliable thread inspection. Order the gauge directly via Metav Werkzeuge or consult the Metav specialists for application advice. Thread gauge ring M44 x 1 mm — Metric fine-thread control by Metav IndustryLine the thread gauge ring M44 x 1 mm offers a compact, robust solution for verifying metric fine threads in production and inspection environments, designed for repeatable checks on right‑hand threads. Metric fine thread M44 x 1 mm DIN 13 tolerance class 6g Hardened gauge steel construction Right-hand thread verification Accurate conformity checks for metric fine threads The gauge ring is engineered to check M44 x 1 mm metric fine threads with the DIN 13, 6g specification, providing a clear go/no‑go decision at the machining or inspection station. The hardened gauge steel body resists wear, ensuring that the acceptance limit remains stable over repeated use; this translates directly into fewer false rejections and a lower risk of out‑of‑tolerance parts progressing through the process. By relying on standardised tolerance criteria, the device supports uniform quality assessments across suppliers and production shifts, improving traceability and auditability in the workshop. Durable design for repeatable measurements Constructed from hardened gauge steel, the ring withstands the mechanical stresses of frequent use while keeping its form and accuracy. The compact geometry and right‑hand thread orientation make it suitable for direct engagement with threaded parts on the shop floor or in a control room environment. The gauge’s mass and balance aid controlled handling and reduce the chance of misalignment during inspection, contributing to higher repeatability and reduced measurement scatter in batch testing. Fits into existing quality routines and documentation As a standardised inspection tool, this ring integrates easily into established inspection plans and quality control workflows. The clear specification DIN 13, 6g allows immediate assignment in inspection protocols and work instructions. The compact format supports storage and transport between stations, while the precise pass/fail criteria speed up routine checks. For traceability, the product is supplied with the manufacturer SKU M315.244.4, enabling straightforward inventory and document management. Contact Metav Werkzeuge for procurement and technical matching: speak to the Metav specialists in Emmerich for advice on adapting the gauge to production needs and for order processing via Metav Werkzeuge GmbH Technical data Article number: M315.244.4 GTIN: 4054469126630 SKU: M315.244.4 Facts Thread size: M44 x 1 mm Tolerance class: DIN 13, 6g Weight: 0.91 kg Tariff number: 90173000 Material & features Material: hardened gauge steel Thread direction: right-hand Application: metric fine threads Category: gauges / measuring devices FAQ What thread type does the gauge check? The thread gauge ring checks M44 x 1 mm metric fine threads to the DIN 13, 6g specification and is intended for right‑hand threads. Is the material suitable for frequent workshop use? Yes, the ring is made from hardened gauge steel, which provides wear resistance for repeated inspections and helps preserve the acceptance limits over time. How is the product identified for inventory and documentation? The product is listed under SKU M315.244.4 and GTIN 4054469126630, which can be used for stock management and quality documentation. Can this gauge be used for other thread forms or sizes? This specific ring is designed for the M44 x 1 mm metric fine thread; different thread forms or sizes require the corresponding dedicated gauges to ensure conformity with their respective standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M44×1.5 Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Product data contains contradictory condition information and cannot be reliably processed; please check and correct the source data before a product description can be generated. It is essential to ensure that all condition-related details in the source data are accurate, consistent, and free from discrepancies. Contradictions in the data can lead to errors in processing and may result in inaccurate or incomplete product descriptions. To resolve this issue, carefully review the source data for any conflicting information and make the necessary corrections. Once the data has been verified and updated, the product description can be generated reliably and without further complications.
M45x1 Thread Go Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
The hardened gauge steel construction, combined with DIN 13 tolerance class 6g and the precise M45×1 pitch, provides a reliable basis for routine thread inspection; choose the go ring for consistent pass/fail verification. Order the gauge directly via Metav Werkzeuge or consult our specialists for application guidance. Go thread ring gauge M45 x 1 mm — go ring for metric ISO fine threads (right-hand, DIN 13, 6g) by Metav IndustryLine The Go thread ring gauge M45 x 1 mm is a dedicated inspection tool for verifying metric ISO fine threads in production and incoming‑goods checks. High-accuracy DIN 13, 6g tolerance Hardened gauge steel for long service life Right-hand M45×1 metric fine thread Consistent conformity checking that speeds quality decisions A purpose-made go ring gauge offers immediate, objective verification of external threads: if the gauge passes, the thread meets the specified limits for acceptance. Built to DIN 13 with tolerance 6g, this ring simplifies go/no‑go decisions at the control bench, reducing inspection time and helping to avoid costly rework. The defined limits reduce interpretation variance between operators, so process throughput improves while scrap rates fall. Robust material and handling for repeatable results Manufactured from hardened gauge steel, the gauge resists wear and maintains its reference profile over many cycles, preserving measurement certainty. The compact design and a mass of 1.4 kg deliver stable handling during manual checks; the solid feel also reduces accidental deformation. Regular wear monitoring and re‑verification safeguard repeatability, ensuring the gauge remains a dependable reference throughout its service life. Practical use in production and quality environments Designed for shop‑floor and incoming‑inspection tasks, the ring serves as a fast acceptance test for turned, milled or rolled parts with an M45×1 external thread. Because the tool is a direct mechanical verification device, it eliminates the need for additional measuring instruments in routine checks and integrates smoothly into standard inspection workflows. Traceable marking such as the GTIN supports inventory control and documentation. Why this gauge supports trustworthy purchasing Selecting a gauge that conforms to recognised standards brings clarity to supplier audits and quality records. The combination of metric fine‑thread sizing, standard compliance and robust construction provides clear evidence of due diligence in inspection routines. Metav’s distribution from Emmerich adds logistical reliability and access to technical advice, backing the physical tool with practical procurement and application support. Contact Metav Werkzeuge today for delivery options, batch availability and application advice for this Metav IndustryLine go thread ring gauge M45×1 (SKU M315.145.4) — our team at the Emmerich warehouse will assist with specifications and next‑step recommendations Technical data Article number: M315.145.4 GTIN: 4054469125008 Label: Go thread ring M45 x 1 mm, right-hand Weight: 1.4 kg Facts Nominal thread: M45 × 1 mm Tolerance class: 6g (DIN 13) Thread direction: right-hand Tariff code: 90173000 Special features Material: hardened gauge steel Type: go (acceptance) ring gauge Application: metric ISO fine threads Category: Gauges / Ring gauges FAQ What thread size does this gauge check? The go thread ring gauge checks M45 × 1 mm external threads; it is manufactured for metric ISO fine‑thread verification. Which tolerance and standard does the gauge comply with? This ring is machined to DIN 13 and the tolerance class 6g, providing standardised acceptance limits for production control. Is the gauge suitable for shop‑floor use? Yes — the hardened gauge steel construction and compact form make it suitable for routine shop‑floor inspections and incoming‑goods checks. Who supplies this gauge and what is the SKU? The gauge is part of the Metav IndustryLine; SKU M315.145.4 identifies the specific go ring in Metav’s range. How should wear and traceability be handled? Log usage and visual wear in the inspection record; replace or have the gauge reverified when wear may affect the acceptance edge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45x1 Thread Ring Gauge For Metric ISO Fine Thread Right Hand, Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
Take advantage of precise pass/fail control and a robust, hardened construction for dependable thread inspection in production. Benefit from conformity to DIN 13, 6g and the compact handling of a dedicated no‑go ring gauge — order the instrument via Metav Werkzeuge or consult the specialists for application advice. Thread ring gauge M45 x 1 mm — No‑go ring for right‑hand metric fine threads (Metav IndustryLine) The Thread Ring Gauge M45 x 1 mm is a hardened no‑go ring designed for rapid pass/fail inspection of right‑hand metric ISO fine threads in production and incoming‑inspection environments. Hardened gauge steel construction Conforms to DIN 13 tolerance 6g Designed for M45 x 1 mm metric fine thread Suitable for rapid go/no‑go inspection Streamlined pass/fail inspection to increase production throughput The ring serves as a straightforward no‑go control that removes ambiguity from threaded part acceptance. With DIN 13 and 6g conformity, the gauge provides a clear, standardised decision criterion that reduces cycle time at inspection points and minimises downstream rework. The defined M45 x 1 mm specification supports consistent evaluation of metric fine threads, helping to shorten inspection loops and keep assembly lines moving without compromising quality. Durable materials for repeatable accuracy Constructed from hardened gauge steel, the tool resists wear under frequent use and maintains dimensional stability over long service intervals. The robust material choice ensures that the working surfaces remain true, which supports repeatable go/no‑go checks and extends the interval between any maintenance or replacement. Built weight and form‑factor favour ergonomic handling and reliable seating on mating threads, so measurement variance due to handling is kept to a minimum. Fits into quality workflows and traceability systems As a dedicated ring gauge for production control, the item integrates easily into established quality procedures and fixture‑based inspections. Its compact design and clear designation make it suitable for bench inspection, assembly line control stations and incoming component checks. Labelling and SKU referencing facilitate traceability in quality documentation; this supports audits and helps maintain consistent acceptance criteria across suppliers and shifts. Proven supplier background for production confidence Supplied under the Metav IndustryLine label, the gauge benefits from an established supply chain and quality filter based in Emmerich. Metav’s focus on accessible precision and broad product availability supports operational reliability on the shop floor. The instrument therefore provides both the technical performance required for tight tolerances and the procurement confidence associated with a specialist metrology partner. Select the Metav IndustryLine thread ring gauge M45 x 1 mm for consistent go/no‑go control; contact Metav Werkzeuge for application advice and secure procurement Technical Data Article number: M315.245.4 GTIN: 4054469126661 Weight: 0.87 kg Material: Gauge steel, hardened Norm: DIN 13, 6g Thread designation: M45 x 1 mm, right‑hand metric ISO fine thread Facts Nominal diameter: 45 mm Pitch: 1 mm Weight (kg): 0.87 Tariff code: 90173000 Eclass: 21170214 Special features No‑go (Ausschuss) ring gauge Conforms to DIN 13 tolerance 6g Right‑hand metric ISO fine thread Hardened gauge steel construction FAQ What does the designation "Ausschuss" mean for this ring gauge? The designation indicates a no‑go function; the Thread Ring Gauge M45 x 1 mm is intended to identify threads that exceed acceptable limits and therefore reject non‑conforming parts. Which tolerance standard applies to this gauge? The gauge is manufactured to DIN 13 with tolerance class 6g, providing a repeatable acceptance criterion for M45 x 1 mm metric fine threads. Is the material suitable for prolonged use in a production environment? Yes, the hardened gauge steel used for the Thread Ring Gauge M45 x 1 mm offers wear resistance and dimensional stability under frequent handling. Can this gauge be used for both left‑ and right‑hand threads? This specific item is configured for right‑hand metric ISO fine threads; left‑hand threads require a purpose‑made left‑hand ring gauge. How should the gauge be documented in quality records? Record the item by its designation and SKU (M315.245.4) along with inspection dates and operator initials; the Thread Ring Gauge M45 x 1 mm can then be traced through batch and supplier documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45x1.5 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13, 6g Hardened Gauge Steel 1.4 kg - Metav IndustryLine
Take advantage of a hardened-gauge steel construction and conformity to DIN 13 (6g) tolerance for reliable thread acceptance checks; the combination of durability and precise metric sizing ensures consistent inspection results in both production and quality‑control environments. Order the gauge directly via Metav Werkzeuge or consult our advisors for application guidance. Go thread ring gauge M45 x 1.5 mm — right-hand metric ISO fine thread, DIN 13 (6g) The Go thread ring gauge M45 x 1.5 mm is a right‑hand metric ISO fine‑thread verification gauge designed for routine acceptance testing and production inspection of M45 × 1.5 threads Go ring gauge for M45 x 1.5 thread Conforms to DIN 13, tolerance 6g Hardened gauge steel for long life Robust 1.4 kg construction for stability Reliable acceptance testing to DIN 13 tolerances A gauge manufactured to DIN 13 with a 6g tolerance offers a clear, standardised criterion for thread acceptance. The M45 x 1.5 sizing corresponds to metric ISO fine threads commonly used in mechanical assemblies and fixtures; the Go condition ("gut") confirms parts that pass the gauge meet the specified maximum material condition. By using a standardised ring gauge, production decisions become faster and repeatable measurement limits are enforced without subjective judgement, reducing scrap and rework. Durable construction for repetitive inspection cycles Made from hardened gauge steel, this ring gauge resists wear under frequent handling and repeated mating with bolt samples. The mass of 1.4 kg and solid build contribute to a stable feel when checking threads manually, reducing play and helping operators obtain a consistent go/no-go result. Durable materials and correct heat treatment extend service life, so inspection intervals are lengthened and replacement costs are minimised, supporting efficient quality workflows. Practical fit for workshop and inspection benches As a right‑hand go ring gauge for metric ISO fine threads, the tool suits incoming inspection, in‑process checks and final acceptance of threaded components. It is particularly useful where a single, unambiguous acceptance check is required; note that no‑go verification requires the complementary no‑go gauge. The simple pass/fail operation speeds up throughput on the shop floor while maintaining traceable, standards‑based control. For application suitability and best practice in handling, Metav’s advisory channels are available to assist with integration into existing QA procedures. For secure, repeatable thread verification choose the Metav IndustryLine Go ring gauge M45 x 1.5 — order via Metav Werkzeuge or contact our technical advisors at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice. Technical data SKU: M315.145.6 GTIN: 4054469125015 Mass designation: M45 x 1.5 Weight: 1.4 kg Manufacturer: Metav IndustryLine Facts Thread size: M45 x 1.5 Tolerance class: 6g (DIN 13) Right‑hand thread Harmonised tariff number: 90173000 Special features Material: hardened gauge steel Type: Go (acceptance) ring gauge Application: Metric ISO fine thread inspection Category: Thread gauges / Gauges FAQ How is the gauge used in inspection? The Go thread ring gauge M45 x 1.5 mm is passed onto a threaded part; a correct fit denotes acceptance to the specified dimension and tolerance, enabling quick pass/fail decisions in production and incoming inspection for M45 × 1.5 threads. What does the tolerance 6g indicate? The 6g designation refers to the tolerance grade for external threads per DIN 13; it defines the permissible dimensional limits for the thread form that the gauge verifies, ensuring parts meet the expected fit and assembly behaviour. Is the gauge suitable for left‑hand threads? No; this ring gauge is manufactured for right‑hand metric ISO fine threads. Left‑hand threads require a specifically produced left‑hand gauge. Does the gauge replace a no‑go gauge? No; the Go ring gauge confirms that a part is within the maximum material condition. A separate No‑Go gauge is required to verify that the part does not exceed minimum material limits when full inspection coverage is needed. What maintenance extends the gauge’s service life? Regular cleaning, careful storage away from corrosive environments and minimal force during checking preserve the hardened surface and thread form; the hardened gauge steel construction reduces wear under normal inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45x2 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The product data contains conflicting information: the item is simultaneously flagged as scrap and as being in good condition. This inconsistency creates confusion and prevents the generation of a complete and accurate product description. To ensure clarity and reliability, it is essential to resolve this discrepancy in the source data. Please review the flagged statuses carefully and update the information accordingly. Accurate product data is crucial for maintaining inventory records, facilitating sales, and ensuring customer satisfaction. Resolving this issue promptly will help avoid potential misunderstandings and ensure the product description reflects its true condition effectively.
M45x2 Thread Plug Gauge Right Hand ISO Fine Thread DIN 13, Hardened Gauge Steel - Metav IndustryLine
Reliable inspection of M45 x 2 mm metric ISO fine threads is provided by the combination of hardened gauge steel construction and conformity to DIN 13 (6g), delivering repeatable verification and reduced rework in assembly lines. Order the thread ring gauge directly via Metav Werkzeuge or consult our advisers for application support. Thread ring gauge M45 x 2 mm — Metric ISO fine thread gauge, DIN 13 (6g) — Metav IndustryLine The Thread ring gauge M45 x 2 mm is a hardened, right‑hand ring gauge for the verification of external metric ISO fine threads, designed for production and incoming inspection tasks. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M45 x 2 mm metric fine threads Right-hand thread verification Ensure fit and reduce assembly rejects with standardised verification The M45 x 2 mm ring gauge is manufactured to DIN 13 and the 6g tolerance band, enabling objective verification of external metric ISO fine threads. Used as a reference check on machined shafts and turned components, the gauge confirms whether threads meet the specified tolerance class; this reduces uncertain fits at assembly and lowers the risk of rework. The measurable outcome is a more consistent production flow and fewer downstream quality issues. Durable construction for sustained repeatability on the shop floor Made from hardened gauge steel, the ring gauge offers high wear resistance and dimensional stability under frequent use. The robust material and traditional ring geometry support long service life as a shop standard, maintaining a stable master profile that resists distortion. This durability translates into fewer replacements and predictable inspection intervals, delivering operational savings while preserving measurement integrity. Simple integration into quality workflows and traceable sourcing The ring gauge is easy to adopt in incoming inspection, process control or final acceptance steps; the compact, single‑piece design does not require additional fixtures and fits into standard inspection routines. Supplied under the Metav IndustryLine umbrella, the tool benefits from established logistics and documentation practices at Metav Werkzeuge, which helps maintain traceability and consistent supply. Confidence in supplier reliability supports continuous production and planning. Contact Metav Werkzeuge today to confirm application compatibility for the Metav IndustryLine thread ring gauge or to request a formal quotation; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.245.7 GTIN: 4054469126685 Weight: 0.87 kg Facts Size: M45 x 2 mm Thread direction: right-hand Standard: DIN 13, 6g Special features Material: gauge steel, hardened Category: Thread ring gauge for metric ISO fine threads Customs tariff number: 90173000 FAQ What thread size does this gauge check? The gauge verifies M45 x 2 mm external metric ISO fine threads and is intended for right‑hand threads. Which tolerance class is covered by this ring gauge? Manufactured to DIN 13 with tolerance 6g, the ring gauge is suitable for standard production checks of external threads in that tolerance band. What material is the gauge made from? This Metav IndustryLine ring gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability. Can this gauge be used in process control on the shop floor? Yes — the ring gauge is designed for routine checks in incoming inspection and process control, providing a simple, repeatable reference for threaded parts. How is the product identified for ordering or traceability? Use Article number M315.245.7 or GTIN 4054469126685 when ordering or recording the gauge in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45x2 Thread Ring Gauge Go Metric ISO Fine Thread Right Hand, Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
Take advantage of a DIN 13, 6g tolerance check combined with a hardened gauge steel body for reliable thread verification; the M45 x 2 mm ring gauge delivers consistent acceptance testing in production and inspection. Order via Metav Werkzeuge or consult our product specialists for application advice. Thread Ring Gauge M45 x 2 mm — Go gauge, DIN 13 (6g) by Metav IndustryLine A Thread Ring Gauge M45 x 2 mm designed for quick verification of metric ISO fine threads to DIN 13, 6g, suitable for workshop and production inspection of right‑hand external threads. DIN 13 tolerance, class 6g Hardened gauge steel construction For M45 x 2 mm metric fine threads Right‑hand thread, robust design Consistent tolerance control for production The ring serves as a dedicated go gauge for external threads, enabling fast, repeatable acceptance checks that reduce rework and maintain assembly reliability. Manufactured to DIN 13 with a 6g tolerance class, the gauge gives an objective pass criterion: if the threaded part engages the ring, it meets the defined dimensional limits. This measurable control is ideal for batch testing during final inspection or in‑process verification, where time‑efficient decisions and documented compliance matter. Solid construction that endures workshop use Made from hardened gauge steel, the component is engineered for dimensional stability and wear resistance under frequent use. At approximately 1.4 kg, the weight reflects a robust build that supports consistent alignment and contact during inspection, reducing the risk of transient deformation. The right‑hand orientation and precise thread profile hold up well in standard industrial environments, so the gauge remains a dependable tool for long service intervals and predictable measurement outcomes. Practical inspection workflow with clear benefits Integrating this ring into an inspection routine simplifies operator decisions and shortens cycle times. The go-only function removes ambiguity: acceptance is binary and repeatable, which benefits production planners and quality engineers seeking to streamline quality gates. The compact, single‑piece design eliminates moving parts, lowering maintenance needs and making it straightforward to store alongside other gauges or on an inspection station rail for immediate access. A reliable partner for precise thread checking Choosing a Metav IndustryLine gauge brings the reassurance of a specialist supplier that supports European workshops and industry. The design focus on precision, repeatability and durable materials helps maintain product quality across runs and suppliers. Combined with Metav’s logistics and product range, this thread ring is a practical component in a broader strategy to reduce supplier variety and centralise measurement standards without compromising on accuracy. For purchase recommendations and application guidance from Metav Werkzeuge—available in Emmerich as a central supply and quality filter—please contact Metav Werkzeuge GmbH via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: M315.145.7 GTIN: 4054469125022 Manufacturer: Metav IndustryLine Facts Thread size: M45 x 2 Weight: 1.4 kg Tariff number: 90173000 Standard: DIN 13, 6g Special features Go gauge (gut) Right‑hand thread Material: hardened gauge steel Category: Gauges / Thread gauges FAQ What is the primary purpose of this ring gauge? The ring is a purpose‑built go gauge for acceptance testing of external metric fine threads; the M45 x 2 mm gauge verifies that parts conform to DIN 13, 6g limits. Is this a go or no‑go gauge? This item is supplied as a go (gut) ring gauge, intended to confirm that the tested external thread will properly engage the reference gauge. What material is used for the gauge and why does that matter? The gauge is made from hardened gauge steel, chosen for its wear resistance and dimensional stability, which preserves the thread profile and measurement integrity over repeated use. Can this gauge be used in a production environment? Yes. The robust construction and clear acceptance criterion make it suitable for production floor inspections and routine quality checks. Does the gauge check left‑ or right‑hand threads? The gauge is manufactured for right‑hand threads and matches the M45 x 2 mm metric fine thread form specified. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45x3 Limit Thread Plug Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Conflicting product data detected: the product condition flags are inconsistent ('ausschuss' and 'gut' are both set), which creates ambiguity in determining the accurate state of the product. As a result, a reliable product description cannot be generated based on the current data. This inconsistency may lead to confusion or errors in further processing or decision-making. To resolve this issue, it is essential to review and correct the source data to ensure that only one condition flag is set appropriately. Once the data has been corrected, please try again to generate a reliable and accurate product description.
M45x3 Thread Ring Gauge Plug Gauge Metric ISO Fine Thread Right Hand DIN 13, 6g Hardened Gauge Steel 1.4 kg - Metav IndustryLine
Taking advantage of a hardened gauge steel construction, conformity to DIN 13 and a precise M45 × 3 thread form provides reliable thread acceptance testing and reduces downstream rework. Order directly via Metav Werkzeuge or consult the Metav team for specification matching. Go thread ring gauge M45 × 3 mm — DIN 13 go gauge, hardened gauge steel (Metav IndustryLine) Go thread ring gauge M45 × 3 mm is a right‑hand metric ISO fine‑thread acceptance gauge for quick verification of external threads in production and inspection areas DIN 13 compliance, tolerance 6g Hardened gauge steel construction For metric ISO fine thread M45×3 Right‑hand go ring gauge Ensures rapid, reliable thread acceptance A hardened go ring gauge offers an efficient, objective pass/fail check that protects assembly processes from out‑of‑tolerance external threads. The M45×3 nominal dimension combined with the 6g tolerance band, specified to DIN 13, gives a clear acceptance criterion for fine‑threaded shafts and components. Using this gauge in-line or at final inspection reduces the risk of assembly failures and limits costly rework, while the simple go/no‑go principle speeds up quality control without the need for complex measurements. Robust design for workshop and production use Manufactured from hardened gauge steel, this right‑hand ring gauge is engineered for repeated handling and routine verification cycles. The material choice resists wear, maintaining the thread form and ensuring repeated measurements remain consistent over time. At 1.4 kg the component is substantial enough to feel robust in use yet compact for handheld inspection benches; the weight also indicates a solid construction that preserves dimensional stability during gauge engagement. Conforms to standards and integrates with inspection routines Compliance with DIN 13 and the stated tolerance class supports traceable quality decisions and convenient documentation of accepted batches. The ring gauge is intended for metric ISO fine threads and works as the practical verification tool within manufacturing, incoming inspection and final assembly workflows. Clear physical acceptance with a go ring complements dimensional records and helps maintain process capability, thereby supporting efficient quality management across machining and assembly operations. For specification matching or to secure the Metav IndustryLine M45×3 go ring gauge, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich Technical data Article number: M315.145.8 GTIN: 4054469125039 Weight: 1.4 kg Facts Thread size: M45 × 3 mm Standard: DIN 13, tolerance 6g Tariff number: 90173000 Special features Material: gauge steel, hardened Type: right‑hand go (acceptance) ring gauge Category: gauges / inspection tools FAQ What is the primary use of this ring gauge? The M45×3 go ring gauge is used for pass/fail verification of external metric ISO fine threads to ensure components meet the acceptance criteria defined by DIN 13. Which tolerance class does the gauge represent? The ring gauge is manufactured to the 6g tolerance class as specified by DIN 13, providing a clear go criterion for M45×3 threads. Is the gauge suitable for production-line use? Yes. The hardened gauge steel construction and simple go/no‑go function make the ring gauge well suited for repeated checks in production and incoming inspection. How should the result of a check with this gauge be interpreted? If the external thread enters the go ring without force, it is considered within the acceptance limit defined by the gauge; failure to enter indicates an out‑of‑tolerance condition requiring corrective action. Does the product include product identification for traceability? The ring gauge carries the article number and GTIN shown in the technical data to support traceability in inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45x4.5 Thread Plug Gauge, Limit, Metric ISO Regular Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Robust hardened gauge steel and strict conformity to DIN 13, 6H provide a durable inspection tool that speeds up quality control and reduces production rework; the precisely specified M45 x 4.5 mm thread and right‑hand orientation make the gauge suitable for repeated pass/fail checks. Order this limit thread plug directly via Metav Werkzeuge or ask our consultants for technical advice. Limit thread plug M45 x 4.5 mm — limit gauge for metric ISO threads (right‑hand) A Limit thread plug M45 x 4.5 mm for quick, reliable inspection of metric ISO threads in production and quality assurance environments Hardened gauge steel construction Complies with DIN 13, 6H For M45 x 4.5 mm metric ISO threads Right‑hand thread for standard assemblies Faster pass/fail inspection that keeps production moving The gauge is designed for efficient limit inspection, enabling immediate determination of whether a threaded part meets the specified tolerances. Manufactured from hardened gauge steel, it resists wear during repeated use, which preserves the defined limits and reduces the need for frequent replacement. Using a dedicated limit gauge in the inspection routine shortens cycle times and lowers the risk of undetected non‑conformances, delivering measurable gains in throughput and fewer rejected assemblies. Conformity and repeatability for trustworthy results Compliance with DIN 13, 6H ensures that the thread form and tolerance class match widely accepted ISO metric standards, so measured parts can be reliably compared across suppliers and production shifts. The nominal size M45 x 4.5 mm and right‑hand orientation are specified to match common connectors and fasteners, simplifying in‑line checks. Traceability of the gauge is supported by its clear identification, allowing quality records to reference the exact inspection tool used during production. Durable design with practical workshop handling The plug gauge’s construction keeps handling simple while offering the rigidity required for repeated shop‑floor checks. At approximately 0.88 kg it provides a stable feel in hand without being cumbersome, which helps maintain consistent engagement with the thread under test. The solid build minimises deformation and preserves measurement boundaries, so each pass/fail decision is based on stable, reproducible tool geometry rather than transient mechanical wear. For procurement or technical consultation regarding the Metav IndustryLine limit thread plug, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate specialist advice Technical data SKU: M315.045 GTIN: 4054469123325 Weight: 0.88 kg Brand: Metav IndustryLine Tariff number: 90173000 Facts Thread nominal: M45 x 4.5 mm Thread direction: right‑hand Standard: DIN 13, 6H Special features Hardened gauge steel Designed for limit inspection of metric ISO threads Category: Thread gauge / Limit plug FAQ What is the intended use of this limit thread plug? The limit thread plug is intended for quick pass/fail inspection of M45 x 4.5 mm metric ISO threads to verify conformity with DIN 13, 6H during production and quality control. Which material is the gauge made from and why is that important? The gauge is made from hardened gauge steel, chosen for its wear resistance and dimensional stability so that the inspection limits remain consistent over many cycles. Does the plug gauge indicate tolerance class? Yes, the item is produced to match DIN 13 with a 6H tolerance class, allowing reliable assessment against the standard nominal limits for metric ISO threads. Can this gauge be used for both internal and external thread checks? This limit plug is designed specifically for internal thread inspection (plug style) of parts with an internal female thread of M45 x 4.5 mm. Is the gauge suitable for heavy shop‑floor use? The robust construction and hardened material make the gauge suitable for regular shop‑floor inspections where repeatability and resistance to wear are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45x4.5 Thread Ring Gauge Go Right-Handed DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Reliable thread verification combined with hardened gauge steel and conformity to DIN 13, 6g make this ring an effective choice for routine inspection and production sampling. Order the Thread Gauge Ring M45 x 4.5 mm directly via Metav Werkzeuge or ask our consultants if needed. Thread Gauge Ring M45 x 4.5 mm — Hardened gauge steel, DIN 13 (6g) The Thread Gauge Ring M45 x 4.5 mm is a precision inspection ring for checking external metric ISO threads (right-hand), suitable for workshop and inspection-station use. Hardened gauge steel construction DIN 13 standard, tolerance class 6g Right-hand metric ISO thread check Precision that ensures reliable inspection A go/no-go inspection strategy begins with an accurate reference. The Thread Gauge Ring M45 x 4.5 mm is manufactured from hardened gauge steel, which provides stable geometry and high wear resistance during repetitive checks. Conformity to DIN 13 and the 6g tolerance class means the ring corresponds to established ISO metric thread tolerances; this enables immediate verification of external thread form and pitch without elaborate measurement setups. The compact nature of a ring gauge reduces handling variability and accelerates sampling in serial production. Built for robust, repeatable workshop use Workshop environments demand tools that tolerate frequent handling and resist surface damage. The use of hardened gauge steel ensures long-term dimensional stability and maintains the reference profile over many inspection cycles. The right-hand orientation and the defined M45 × 4.5 mm profile simplify process checks at the machine or at the control bench, shortening inspection time and supporting consistent batch acceptance decisions. As a simple mechanical comparator, the ring gauge removes interpretation ambiguity: the part either fits the "go" profile or does not, streamlining quality control workflows. Easy integration into quality routines and traceability Designed for straightforward integration into existing inspection routines, the ring gauge supports quick go/no-go checks during in-process control, final inspection and incoming goods testing. The clear identification (SKU M315.145, GTIN 4054469124995) enables catalogue management and traceability within the quality system. Paired with a documented inspection plan, the gauge helps to document compliance with manufacturing standards and to reduce rework by catching out-of-tolerance threads early. For companies seeking consistent sample-to-sample decisions, this reference ring forms a reliable element of a pragmatic quality-control toolkit. For dependable thread checks, choose the Metav IndustryLine gauge ring and contact Metav Werkzeuge in Emmerich for tailored advice or procurement support: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M315.145 GTIN: 4054469124995 Material: Gauge steel, hardened Thread size: M45 x 4.5 Standard: DIN 13, 6g Facts Tariff number: 90173000 ECLASS: 21170214 Condition: Go gauge Orientation: Right-hand thread Special features For metric ISO standard threads Category: Lehren; Messstifte SKU: M315.145 FAQ What does the M45 x 4.5 designation mean? The designation M45 x 4.5 indicates a metric external thread with a nominal diameter of 45 mm and a thread pitch of 4.5 mm; the Thread Gauge Ring M45 x 4.5 mm checks that external threads meet this profile. Is this a go or no-go ring? This item is supplied as a go (good) ring gauge; the product M315.145 is intended to confirm acceptability of external threads to the DIN 13, 6g profile. Which materials is the ring compatible with during inspection? The ring gauge inspects the external form of threads regardless of part material; the gauge itself is made from hardened gauge steel to resist wear during repeated checks. Can this ring be used for final acceptance tests? Yes, the ring gauge provides a quick go/no-go decision and is suitable for routine acceptance tasks where conformity to DIN 13, 6g is required. How is the gauge identified for traceability? Identification is provided via SKU M315.145 and GTIN 4054469124995, facilitating inventory control and documentation in inspection plans. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45×1.5 mm Go/No-Go Thread Plug Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Robust limit control for metric fine threads combined with hardened construction and DIN‑specified tolerances supports reliable pass/fail inspection; benefit from consistent results and reduced rework. Order the gauge directly via Metav Werkzeuge or consult our technical advisers for specification matching. Limit thread plug gauge M45×1.5 mm (metric ISO fine thread), right-hand – Metav IndustryLine The Limit thread plug gauge M45×1.5 mm is a hardened gauge steel go/no-go master for metric ISO fine threads, designed for routine quality control in production and incoming inspection. Limit plug gauge M45×1.5 mm Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Right‑hand metric ISO fine thread Precision where repeatability matters This limit plug gauge delivers a straightforward go/no‑go verdict for internal threads, converting dimensional specification into an immediate control result. Constructed from hardened gauge steel, the tool maintains dimensional stability under repeated use and resists wear that would otherwise compromise assessment. Compliance with DIN 13, 6H ensures compatibility with standard metric ISO fine‑thread specifications, so inspection procedures can be standardised across batches and suppliers, reducing ambiguity during assembly and acceptance testing. Designed for robust workshop and shop‑floor use The item is specified as a right‑hand limit plug intended for M45×1.5 mm threads and is completed as a practical, compact control instrument that fits standard inspection routines. Its mass and balance—approximately 1.0 kg—provide a tactile feel during verification and help avoid false readings caused by slippage. As a simple mechanical gauge, it removes the need for electronic setup and supports rapid throughput in repetitive checks, improving overall process efficiency while keeping tooling costs predictable. Traceable conformity and clear integration into QA flows Supplied by Metav IndustryLine, the gauge is intended to be issued as a reliable reference for routine dimensional checks and supplier control. The compact go/no‑go format aids quick decisions on acceptance without extensive measurement routines; when a precise quantitative measurement is required, the same inspection plan can reference calibrated metrology equipment. Using standardised limit gauges like this one supports traceable quality practices and helps maintain consistent production outcomes over time. For a DIN‑conforming limit gauge from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for rapid delivery and specification advice on the M45×1.5 mm limit plug gauge. Technical data Article number / SKU: M315.045.6 GTIN: 4054469123349 Label: Limit thread plug gauge M 45 x 1,5 mm, metric ISO fine thread, right‑hand Weight: 1.0 kg Core technical data Thread: M45 × 1.5 mm Tolerance / standard: DIN 13, 6H Material: gauge steel, hardened Customs tariff number: 90173000 UID: M315.045.6 Special features Right‑hand metric ISO fine thread Go/no‑go limit plug design for pass/fail checks Hardened gauge steel construction for wear resistance Intended for shop‑floor inspection and incoming part control FAQ What thread form and size does this gauge check? The Limit thread plug gauge checks metric ISO fine threads of size M45×1.5 mm; it is manufactured to verify the specified pitch and profile for right‑hand internal threads. Is the gauge compliant with recognised thread standards? Yes, the tool is produced to DIN 13 requirements with a 6H tolerance class, ensuring conformity with standard metric ISO fine‑thread specifications for routine inspection. What material is the gauge made from and how durable is it? The gauge is made from hardened gauge steel, giving it high wear resistance and stable dimensions under repeated use, suitable for regular shop‑floor pass/fail checking. Which product code should be ordered for this gauge? Order using SKU M315.045.6; this identifies the Metav IndustryLine limit thread plug gauge for M45×1.5 mm, right‑hand. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45×1.5 Thread Ring Gauge For ISO Fine Thread, Right Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of DIN 13 conformity, hardened gauge steel construction and clear go/no‑go functionality for reliable thread inspection — order the gauge directly via Metav Werkzeuge or contact our consultants for selection and delivery. Thread ring gauge M45 x 1.5 mm (no‑go) — Metric ISO fine thread, right‑hand, Metav IndustryLine A thread ring gauge M45 x 1.5 mm (no‑go) for rapid go/no‑go inspection of metric ISO fine threads in production and incoming inspection; suited to workshop and shop‑floor use. No‑go ring for M45 x 1.5 threads Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Reliable rejection checks that protect part quality A dedicated no‑go ring provides an unambiguous, tactile check that a threaded part exceeds the permitted tolerance. Made from hardened gauge steel, this ring resists wear and preserves its measuring edges, which keeps rejection decisions consistent over many cycles. The DIN 13 specification with 6g tolerance guarantees that the gauge matches the common metric ISO fine‑thread standard, so inspection aligns with established manufacturing norms and reduces the risk of faulty assemblies. Practical advantages for production and inspection workflows Using a purpose‑built gauge shortens inspection time compared with measuring and calculating thread elements. The compact, single‑piece design offers fast pass/fail feedback for line operators and quality staff, enabling immediate corrective action and fewer downstream defects. Weight and handling are balanced for routine checks: the ring’s construction and right‑hand thread orientation match typical mating components, making it straightforward to integrate into existing inspection procedures. Built for traceable repeatability and everyday robustness The gauge is manufactured from hardened gauge steel, giving abrasion resistance and long service life under repetitive use. The precise thread form and finish ensure reproducible engagement with the test part; this repeatability supports stable quality control data and reduces ambiguity in acceptance criteria. For workshops and inspection stations that require simple, reliable verification rather than complex measurement, the no‑go ring is an efficient tool to safeguard assembly quality without lengthy set‑up. Choose Metav IndustryLine gauges for dependable thread control — contact Metav Werkzeuge in Emmerich for delivery and technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M315.245.6 GTIN: 4054469126678 Manufacturer: Metav IndustryLine Dimensions & core data Thread size: M45 x 1.5 mm Weight: 0.87 kg Standard: DIN 13, 6g Tariff number: 90173000 Features & applications Material: hardened gauge steel Type: No‑go ring, right‑hand thread Application: Inspection of metric ISO fine threads, go/no‑go testing Category: Thread gauges / inspection tools FAQ What does a no‑go ring check for? A no‑go ring confirms that an external thread exceeds the maximum material condition; the thread ring gauge M45 x 1.5 mm (no‑go) is used to identify threads that are oversize or out of tolerance. Is the gauge suitable for production use on the shop floor? Yes. The Metav IndustryLine ring is made from hardened gauge steel and designed for repetitive go/no‑go checks in production and incoming inspection. Which standard does this thread gauge follow? The gauge conforms to DIN 13 with a 6g tolerance class, matching standard metric ISO fine‑thread specifications for m45 x 1.5. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45×1mm Go/No-Go Thread Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Ensure reliable, repeatable thread inspection with a hardened gauge steel construction, precise M45 × 1.0 mm dimensions and conformity to DIN 13, 6H; order the Limit plug gauge M45 × 1.0 mm directly via Metav Werkzeuge or ask our consultants if needed. Limit plug gauge M45 × 1.0 mm — metric ISO fine thread plug, right‑hand, DIN 13 (Metav IndustryLine) A Limit plug gauge M45 × 1.0 mm engineered for rapid verification of internal metric ISO fine threads in production and quality control environments. DIN 13, tolerance class 6H Hardened gauge steel construction M45 × 1.0 metric ISO fine thread Right‑hand thread for standard inspections Fast, standards‑based thread verification for production lines The gauge is designed for straightforward conformity checks against DIN 13 requirements and the 6H tolerance class, ensuring that threaded bores meet common engineering standards. As a purpose‑made limit plug gauge for M45 × 1.0 mm metric fine threads, it provides an immediate pass/fail indication that reduces measurement time on the shop floor and supports higher throughput. By translating thread geometry into a tactile verification step, the instrument helps maintain process stability and reduces downstream rejects, contributing directly to efficient quality control workflows. Durable construction that stands up to regular inspection use Manufactured from hardened gauge steel, the plug gauge resists wear during repeated engagement with metal components, extending service life and preserving accuracy. The robust material choice and compact geometry deliver the stiffness required for consistent checks, with a mass of 1.0 kg that reflects solid build quality without compromising handling. For workshops and inspection benches that require dependable gauges, the combination of hardened construction and standardised thread form provides a low‑maintenance solution that maintains calibration intervals and supports predictable inspection outcomes. Practical handling and application in inspection routines As a right‑hand limit plug gauge, this tool is intended for verification of internal metric ISO fine threads in components such as housings, bushings and mating parts; the fit confirms whether the threaded bore falls within the specified tolerance band. The instrument is simple to use in repetitive checks: insert the plug into the thread to confirm conformance to the M45 × 1.0 mm profile and the 6H class; absence of excessive play indicates compliance. Clear labelling and a compact profile mean the gauge integrates easily into pick‑and‑place routines or manual inspection stations, supporting consistent quality decisions with minimal training required. For integration into standard inspection processes, request the Metav IndustryLine limit plug gauge via Metav Werkzeuge for prompt delivery from Emmerich, or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 for specification guidance. Technical data Article number: M315.045.4 GTIN: 4054469123332 Manufacturer: Metav IndustryLine Facts Thread: M45 × 1.0 mm Weight: 1.0 kg Tolerance: 6H Tariff number: 90173000 Special features Hardened gauge steel Right‑hand metric ISO fine thread Compliant with DIN 13 Category: Plug gauge / Limit gauge FAQ What does the DIN 13, 6H marking indicate? The DIN 13, 6H marking denotes the standard thread form and the internal tolerance class; the Limit plug gauge M45 × 1.0 mm is manufactured to verify threads against this specification. Is this gauge suitable for production use? Yes. The Metav IndustryLine plug gauge is built for repetitive inspection tasks on the production floor and for quality control benches. What material is the gauge made from? The plug gauge is made from hardened gauge steel to provide wear resistance and stable performance during repeated checks. How is the gauge intended to be used? The gauge serves as a limit plug for go/no‑go style verification of internal metric ISO fine threads; insert the gauge into the bore to confirm conformity to M45 × 1.0 mm and 6H tolerances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45×3 Thread Gauge Ring Right-Hand Fine Pitch ISO Thread DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a DIN‑compliant inspection tool that combines proven material hardness with a clear go/no‑go function to keep production tolerances under control; the robust construction and precise M45 × 3 mm thread form support reliable pass/fail decisions on the shop floor. Order the ring gauge directly via Metav Werkzeuge or consult Metav's advisors for specification matching and stock information. Thread ring gauge M45 x 3 mm (NOGO) — DIN 13, 6g, Metav IndustryLine The Thread ring gauge M45 x 3 mm (NOGO) is a right‑hand metric ISO fine‑thread ring designed for fast pass/fail verification of external threads in manufacturing and incoming inspection. Thread size M45 x 3 mm DIN 13 tolerance class 6g Hardened gauge steel construction Right‑hand metric ISO fine thread Assured conformity with industry standards The ring gauge is manufactured to DIN 13 and 6g tolerance classes, ensuring that the M45 x 3 mm thread form is checked against established international limits. As a dedicated NOGO ring, it verifies that external threads do not exceed the maximum material condition, allowing confident rejection of oversize parts before assembly. This standardised approach reduces ambiguity in inspection records and supports reproducible quality decisions across shifts and suppliers. Robust construction for repetitive inspection duty Made from hardened gauge steel, the gauge withstands repeated use in workshop environments while maintaining form stability. The compact, single‑piece design and a mass of 0.87 kg give the tool enough inertia for stable handling without excessive bulk. The right‑hand metric ISO fine‑thread profile is machined for clear engagement; the NOGO function prevents acceptance of threads that could cause assembly or functional problems, helping to lower downstream rework rates and scrap. Streamlined quality control in production workflows Integrating a dedicated NOGO ring into incoming inspection or on‑line checks speeds throughput: a quick trial fit provides an unambiguous result without measurement interpretation. The ring gauge supports lean inspection routines and can be used alongside calibrated GO gauges for a complete pass/fail system. Metav’s role as a long‑standing precision partner adds logistical reassurance — consistent stock and technical advice help maintain uninterrupted inspection capability on the shop floor. Contact Metav Werkzeuge today in Emmerich for procurement advice and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.245.8 GTIN: 4054469126692 SKU: M315.245.8 Facts Weight: 0.87 kg Tariff number: 90173000 Special features Thread size: M45 x 3 mm Function: NOGO (no‑go) ring gauge Norm: DIN 13 Tolerance class: 6g Material: gauge steel, hardened Thread direction: right‑hand metric ISO fine thread FAQ What is the intended use of this ring gauge? The ring gauge M45 x 3 mm (NOGO) is intended for pass/fail inspection of external metric ISO fine threads to ensure threads do not exceed maximum material limits. Does the gauge comply with recognised standards? Yes, this ring gauge is manufactured to DIN 13 and tolerance class 6g, making it suitable for standard industrial thread checks. What material is the gauge made from and how durable is it? The gauge is made from hardened gauge steel, a material chosen for wear resistance and dimensional stability under normal workshop use. How does a NOGO ring gauge affect quality control? A NOGO ring provides a clear rejection criterion: parts that engage the NOGO ring exceed allowed dimensions and are flagged before assembly, improving first‑pass quality and reducing rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M45×4.5 Thread Ring Gauge Metric ISO Right-Hand DIN 13, 6g Hardened Gauge Steel 0.87 kg - Metav IndustryLine
Take advantage of a hardened gauge steel construction combined with DIN 13 tolerance class 6g and precise M45 × 4.5 mm sizing for dependable thread inspection and fewer production stoppages. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M45 × 4.5 mm — DIN 13, hardened gauge steel (Metav IndustryLine) A Thread ring gauge M45 × 4.5 mm for right-hand metric ISO threads, designed for reliable Go/No‑Go checks in production and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For right-hand M45 × 4.5 mm ISO threads Consistent, standardised inspection for production The ring gauge is a fast, objective way to verify external metric threads. Built to the DIN 13 standard with tolerance class 6g, it provides a clear go/no‑go decision that removes subjective error from visual checks. Using a calibrated gauge rather than manual comparison reduces sorting time and lowers the risk of rework, so quality control becomes a measurable, repeatable process. The nominal size M45 and pitch 4.5 mm match ISO metric specifications, ensuring compatibility with standardised components across suppliers. Built to last: material and maintenance benefits Manufactured from hardened gauge steel, the gauge resists wear under repeated use and maintains its verification capability over long inspection cycles. Hardening increases surface durability and preserves the thread profile, which in turn sustains measurement reliability and reduces the frequency of replacement. Where traceability is required, the ring gauge can be integrated into routine inspection plans; regular visual checks and controlled handling preserve the hardened surfaces and extend service life, delivering lower total cost of ownership for busy workshops. Practical fit into quality workflows This ring gauge is intended for shopfloor and laboratory usage where quick, unequivocal checks are needed for right-hand metric ISO threads. It suits production lines, maintenance bays and incoming goods inspections, supporting faster throughput and fewer defective assemblies. As a physical limit gauge it complements measuring instruments and digital inspection systems, providing a compact, robust tool for pass/fail verification that simplifies operator decisions and documents conformity within established procedures. Discuss thread inspection requirements with Metav Werkzeuge to integrate this hardened M45 × 4.5 mm ring gauge into the verification routine and secure consistent, repeatable results across production stages. Technical data SKU: M315.245 GTIN: 4054469126654 Designation: Thread ring gauge M45 × 4.5 mm Material: gauge steel, hardened Standard: DIN 13, 6g Facts Nominal size: M45 Pitch: 4.5 mm ECLASS: 21170214 Tariff code: 90173000 Special features Right-hand thread For metric ISO standard threads Category: Gauges / Ring gauges Brand: Metav IndustryLine FAQ What is the primary use of this ring gauge? The thread ring gauge M45 × 4.5 mm is used to perform rapid Go/No‑Go checks on external metric ISO threads to confirm conformity with DIN 13, tolerance 6g and avoid assembly issues. Which materials or components should be checked with this gauge? The gauge is intended for standard external ISO threads on metal components where M45 × 4.5 mm sizing applies; it is suitable for production parts, maintenance checks and incoming inspection of threaded shafts and studs. How does the DIN 13, 6g designation affect acceptance criteria? DIN 13 defines the geometry and tolerances for ISO metric threads; a 6g tolerance class indicates the permissible limits for the external thread and ensures interchangeability with mating internal threads produced to matching tolerances. Can this ring gauge be used on left-hand threads? No, this particular item is manufactured for right‑hand metric ISO threads; left‑hand variants require a dedicated gauge specified for that thread direction. Is identification and traceability provided for the gauge? The ring gauge is delivered with product identification (SKU and GTIN) for traceability; include the SKU M315.245 in quality records to document inspections and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M46 x 1 mm Thread Go Ring Gauge Metric ISO Fine Right-Handed, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of a hardened gauge steel construction and DIN 13 tolerance for reliable, repeatable thread verification; combine this with a compact M46 x 1 Go ring for efficient in‑process checks. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M46 x 1 (Go) — Metric ISO fine thread, DIN 13 (Metav IndustryLine) A Thread ring gauge M46 x 1 (Go) designed for fast pass/fail inspection of metric ISO fine threads in production and quality control environments. Hardened gauge steel construction DIN 13 tolerance class 6g Go gauge for quick pass/fail checks Metric ISO fine thread M46 x 1 Reliable conformity for metric fine threads The primary advantage of this ring is consistent verification against the DIN 13 standard and the 6g tolerance class, making it suitable for routine quality assurance in component manufacturing. As a Go gauge, it confirms whether internal threads meet the lower limit of acceptance without requiring dimensional measurement every time; this reduces inspection time while ensuring compliance with established thread standards. Using a dedicated ring gauge simplifies conformity decisions and speeds up throughput in workshop and production environments. Robust construction for frequent handling Manufactured from hardened gauge steel, the ring is engineered to withstand repeated use while retaining its measuring edges. The material choice and heat treatment deliver a stable contact geometry that resists wear, which is essential for maintaining repeatable results over many inspection cycles. At approximately 1.4 kg the item balances mass for stable engagement with ease of handling during manual checks. The right‑hand metric ISO fine thread profile and the precise M46 x 1 pitch ensure the instrument mates reliably with the parts under test. Integrating a Go ring into inspection workflows AGo ring gauge is a pragmatic tool for shopfloor control: it enables immediate pass/fail decisions without auxiliary devices and reduces operator interpretation error. Where traceable measurement is required, the gauge acts as a fast screening step before items proceed to more detailed metrology. The compact handling and unambiguous result lower inspection time per part, supporting efficient process control and higher throughput. For manufacturers aiming to streamline quality gates, the ring complements calipers and comparators while keeping measurement practice straightforward and robust. For secure conformity checks with Metav IndustryLine gauges, contact Metav Werkzeuge in Emmerich for procurement and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M315.146.4 GTIN: 4054469125046 Label: Thread ring gauge M46 x 1 (Go) Facts Thread size: M46 x 1 Weight: 1.4 kg Tariff number: 90173000 Tolerance/class: 6g Standard: DIN 13 Special features Material: hardened gauge steel Type: Go (pass) ring gauge Thread form: metric ISO fine thread, right‑hand Categories: Lehren; Messstifte FAQ What is the purpose of a Go ring gauge? A Go ring gauge provides a fast pass/fail check of internal threads; the Thread ring gauge M46 x 1 (Go) confirms whether a threaded component meets the minimum dimensional requirements specified by DIN 13. Which standard and tolerance does this ring gauge follow? The ring is manufactured to DIN 13 and the tolerance class 6g, ensuring it matches the common specification for metric ISO fine threads used in mechanical engineering. What material is the gauge made from and why does it matter? Manufactured from hardened gauge steel, the gauge offers durability and stable contact geometry, which preserves accuracy and repeatability during frequent shopfloor inspections. Can the ring gauge be used for quality control in production? Yes, the Go ring gauge M46 x 1 is intended for rapid in‑process checks and helps to streamline inspection workflows before parts are sent for full metrological analysis. How heavy is the gauge and does weight affect handling? The gauge weighs approximately 1.4 kg, a mass that provides stable engagement with threaded parts while remaining manageable for manual inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M46x1 Thread Ring Gauge Go Right-Hand DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Benefit from robust DIN 13 accuracy and a hardened gauge steel body to secure repeatable pass/fail checks on metric fine threads; order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M46 x 1 mm (no‑go) — no‑go metric ISO fine thread gauge, DIN 13, Metav IndustryLine A thread ring gauge M46 x 1 mm (no‑go) for fast verification of metric ISO fine threads in production, inspection and incoming goods control Hardened gauge steel construction DIN 13 tolerance, grade 6g For M46 x 1 mm metric fine threads Right‑hand no‑go functionality Reliable thread inspection that keeps production moving The thread ring gauge M46 x 1 mm is designed as a dedicated no‑go control to prevent incorrect thread forms entering assembly. Made from hardened gauge steel, the ring resists wear and provides consistent dimensional stability over repeated checks, which reduces the need for rework and minimises downtime. Using a dedicated no‑go ring simplifies acceptance criteria: if the ring does not enter, the internal thread meets the specified tolerance, enabling immediate go/no‑go decisions on the shop floor. Clear nominal standard and measurable tolerance for traceable checks Supplied to DIN 13 with grade 6g, this gauge corresponds to the established metric ISO fine‑thread tolerancing used in mechanical engineering. The defined tolerance class provides a verifiable boundary for functional fit rather than a subjective estimate; this supports reproducible quality control and documentation workflows. The ring’s M46 × 1 mm designation and 1 mm pitch are directly comparable to engineering drawings, allowing seamless integration into inspection plans and process control documentation. Durable design for everyday industrial use The construction in hardened tool steel ensures that the ring retains its form under normal shop conditions and handle‑use. The right‑hand configuration matches standard thread directions and the robust material choice reduces wear-induced drift in dimensions, which in turn extends the interval between gauge replacements. Simple handling and fast pass/fail evaluation make this gauge a pragmatic choice for incoming inspection and production checkpoints where speed and repeatability are essential. Choose the Metav IndustryLine M46 no‑go thread ring gauge for dependable, repeatable thread control and contact Metav Werkzeuge for ordering or consulting on integration into existing inspection routines Technical data Article number: M315.246.4 GTIN: 4054469126708 Manufacturer: Metav IndustryLine Material: Gauge steel, hardened Thread size: M46 x 1 mm Weight: 0.87 kg Standard: DIN 13, 6g Right‑hand thread Facts Nominal diameter: 46 mm Pitch: 1 mm Weight (kg): 0.87 Tariff number: 90173000 Special features No‑go (ausschuss) function for go/no‑go control For metric ISO fine threads Hardened construction for wear resistance Category: thread gauges / inspection gauges FAQ What does "no‑go" mean in practical terms for inspection? A no‑go gauge like the thread ring gauge M46 x 1 mm is used to confirm that an internal thread does not exceed permitted material removal or form faults; if the no‑go ring enters, the thread fails the check. Which threads is this ring gauge intended for? This ring is intended for M46 x 1 mm metric ISO fine internal threads manufactured to DIN 13 with tolerance grade 6g. What is the material and why is it important? The gauge is made of hardened gauge steel, which provides dimensional stability and resistance to wear so that the ring maintains accuracy during regular shop use. How is the tolerance class relevant to assembly fit? The DIN 13, 6g tolerance of the Metav IndustryLine ring defines the maximum permissible deviation for the internal thread; using the gauge ensures components meet the intended functional fit in assemblies. How should the gauge be maintained to preserve accuracy? Regular cleaning, gentle handling and storage in a dry environment will preserve the hardened ring’s performance; avoid impacts and severe contamination that could accelerate wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M46x1.5 Thread Go Ring Gauge For Metric ISO Fine Thread Right-Hand, Hardened Plug Gauge DIN 13 6g - Metav IndustryLine
Take advantage of a robust inspection solution that combines DIN 13 traceability, hardened gauge steel durability and clear pass/fail verification for efficient production control; order the gauge directly via Metav Werkzeuge or consult our specialists for specification matching. Thread ring gauge M46 x 1.5 mm (go) – DIN 13, 6g | Metav IndustryLine A Thread ring gauge M46 x 1.5 mm (go) designed for routine inspection of metric ISO fine external threads in production and quality assurance environments. DIN 13, tolerance 6g Hardened gauge steel construction Suitable for metric ISO fine threads Right-hand go ring for thread inspection Reliable verification with recognised tolerances The ring provides a fast, binary check for external threads, allowing immediate acceptance where the M46 x 1.5 mm profile passes the calibrated limit. Built to DIN 13 with a 6g tolerance class, this ring serves as a dependable comparator in shop-floor inspections and sampling plans. The hardened gauge steel body resists wear and preserves the reference profile, which reduces rework rates and maintains assembly fit — a practical way to protect throughput and ensure conformity to specified thread standards. Built for durability and straightforward handling A solid construction and measured mass give the gauge stable handling during repeated checks; the robust design supports sustained use in workshop conditions. The right-hand orientation and clear designation as a go ring simplify operator decisions and speed the inspection sequence. With proven material choice and industrial finishing, this gauge minimises maintenance intervals and delivers consistent results across production shifts, contributing to lower downtime and predictable inspection cycles. Easy integration into quality workflows When introduced into a quality-control routine, the ring becomes a rapid, low-complexity instrument for first-article inspection, in-process checks and final acceptance. Traceable identification and the Metav supply chain ensure repeat availability and consistent specification between batches. Combined with documented inspection plans, the gauge supports clear acceptance criteria and helps to anchor process capability studies, while Metav’s experience in supplying precision instruments underpins reliable delivery and stock continuity. For specification advice or to secure Metav IndustryLine thread gauges from our Emmerich warehouse, contact Metav Werkzeuge for tailored guidance and dependable supply Technical data Article number: M315.146.6 GTIN: 4054469125053 Customs tariff number: 90173000 Facts Thread size: M46 x 1.5 mm Weight: 1.4 kg Standard: DIN 13 Tolerance class: 6g Special features Material: hardened gauge steel Designation: go (good) ring gauge Thread hand: right-hand Application: metric ISO fine threads Category: Gauges; Gauging equipment FAQ What is this gauge used for? The thread ring gauge M46 x 1.5 mm (go) is used to verify external metric ISO fine threads quickly and reliably against the accepted limit profile. Which standard and tolerance does the gauge comply with? The M46 x 1.5 mm go ring is made to DIN 13 and specified to tolerance class 6g for industry-standard thread acceptance. What material is the gauge made from and how durable is it? Manufactured from hardened gauge steel, the ring maintains profile accuracy during repeated inspections and offers strong wear resistance. Is the gauge right-hand or left-hand? This particular ring is a right-hand go gauge and is intended for checking right-hand metric external threads. How should the 'go' result be interpreted in inspection? A pass with the go ring indicates that the external thread falls within the maximum material limits for the M46 x 1.5 mm specification and is acceptable for fitment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M46×1.5 Thread Go/No-Go Ring Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of fast, DIN‑compliant thread verification and robust, hardened‑steel construction to keep production checks efficient and reproducible. The combination of exact M46 × 1.5 mm sizing, 6g tolerance to DIN 13, and workshop‑grade durability supports reliable quality control. Order the gauge directly via Metav Werkzeuge or request technical advice from our consultants. Thread ring gauge M46 × 1.5 mm (DIN 13, 6g) — Metav IndustryLine A thread ring gauge M46 × 1.5 mm designed for verification of metric ISO fine threads to DIN 13; right‑hand orientation for workshop and production use. M46 × 1.5 mm for metric ISO fine threads Tolerance class 6g to DIN 13 Hardened gauge steel construction Right‑hand thread verification Ensure conformity with standardised tolerances A calibrated ring gauge is the most direct method to confirm whether external threads meet specification. The M46 × 1.5 mm ring verifies pitch and major diameter in accordance with DIN 13, using 6g tolerance as the acceptance criterion. By checking parts against a physical standard, the inspection process removes ambiguity from dimensional reports and accelerates pass/fail decisions on the shop floor. This direct approach reduces measurement interpretation and supports consistent batch releases. Built for repeatable workshop performance Constructed from hardened gauge steel, this ring delivers stable geometry and abrasion resistance under everyday workshop conditions. The material choice minimises wear, so the gauge preserves its functional limits for longer intervals and requires less frequent replacement. At 0.87 kg the component is substantial enough to feel robust without compromising ease of handling during routine checks. The mechanical simplicity of a ring gauge translates into low maintenance and fast, repeatable checks in production and incoming inspection. Practical integration into inspection routines The ring is suitable for quick go/no‑go verification in assembly, turning, or quality control stations where metric ISO fine threads are produced or received. Using a standardised gauge streamlines documentation and traceability, because results are immediately reproducible and easily recorded. For operations pursuing consistent throughput, this method decreases downtime compared with lengthy coordinate‑based inspections and supports rapid decision making at the control point. Designed for industry use and traceable identification Manufactured to match the DIN 13, 6g specification and supplied with clear identification, the gauge is appropriate for workshops and suppliers that rely on traceable, standardised test equipment. The right‑hand orientation addresses the common thread directions encountered in metric fasteners. Clear labelling and a durable construction mean that the ring remains a reliable component of a calibrated inspection set for regular quality assurance cycles. Select Metav IndustryLine thread gauges for reliable, DIN‑compliant inspection and contact Metav Werkzeuge for procurement or technical clarification via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.246.6 SKU: M315.246.6 GTIN: 4054469126715 Facts Thread size: M46 × 1.5 mm Weight: 0.87 kg Tolerance class: 6g Standard: DIN 13 Zolltarifnummer: 90173000 Special features Material: hardened gauge steel Orientation: right‑hand thread Application: verification of metric ISO fine threads Category: gauges / ring gauge FAQ What thread does this gauge check? The ring checks metric ISO fine threads sized M46 × 1.5 mm, suitable for applications specified to DIN 13 with tolerance 6g. Is the gauge suitable for production control? Yes. The Metav IndustryLine ring gauge is intended for workshop and production use as a quick verification tool to support go/no‑go decisions and routine incoming inspection. What material is the ring made from and why does that matter? Manufactured from hardened gauge steel, the ring resists wear and preserves measuring limits for prolonged use, ensuring repeatable checks without rapid degradation. How is the gauge identified for traceability? The gauge is supplied with clear identification including SKU and GTIN (M315.246.6 / 4054469126715), allowing straightforward documentation in quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com