Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M5 x 0.5 Thread Go Ring Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of fast, standards‑based verification with a hardened gauge steel construction and DIN 13 (6g) conformity for dependable thread assessment; order the ring gauge directly via Metav Werkzeuge or consult our specialists for further application advice. Thread ring gauge M5 x 0.5 — metric fine‑thread inspection ring, hardened, DIN 13 (6g) by Metav IndustryLine Thread ring gauge M5 x 0.5 is a hardened ring gauge for quick, repeatable verification of right‑hand metric ISO fine threads in production and inspection environments Hardened gauge steel construction DIN 13 tolerance class 6g For M5 x 0.5 metric fine threads Compact, lightweight design Reliable, repeatable checks for fine metric threads A ring gauge designed for direct functional testing offers a straightforward way to confirm thread conformity on fasteners and tapped holes. The M5 x 0.5 specification and the ring‑gauge form allow immediate go/no‑go assessment without complex setup, which reduces inspection time and avoids measurement interpretation errors. For quality engineers and workshop inspectors, this type of gauge provides a clear, objective decision criterion that supports efficient inline checks and incoming goods inspection. Robust materials for long service life and stable results Manufactured from hardened gauge steel, the ring retains its form under repeated use and resists wear that would otherwise introduce measurement drift. The material choice delivers stable contact geometry and minimises maintenance intervals, so production routines run with fewer interruptions. The combination of hardness and precise machining keeps the seated fit consistent, ensuring that pass/fail outcomes remain reliable over many cycles. Conformity with DIN 13 and clearly defined tolerance class Built to DIN 13 with a tolerance class of 6g, the gauge matches the established specification for metric ISO fine threads and therefore integrates seamlessly into formal quality procedures. The tolerance class indicates the thread tolerance band being checked; using a gauge that corresponds to the intended class removes ambiguity in acceptance criteria and supports traceable inspection records. This makes the tool suitable for manufacturing environments that require documented compliance with recognised standards. Practical integration into inspection workflows Weighing approximately 0.01 kg and supplied in a compact form, the gauge is easy to handle and store on inspection benches or in dedicated gauge drawers. Its simple functional concept removes the need for measurement interpretation tools, speeding up repeated checks during assembly or final inspection. The compact footprint and low mass aid quick manual handling while preserving precision, which is particularly useful for high‑mix, low‑volume production or for quality control loops on small components. Arrange supply through Metav Werkzeuge for Metav IndustryLine quality and guidance on specifying gauges for production — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: M315.205.2 GTIN: 4054469125442 Net weight: 0.01 kg Material: hardened gauge steel Norm: DIN 13, 6g Thread size: M5 x 0.5 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Thread type: metric ISO fine thread, right‑hand Tolerance class: 6g Form: ring gauge (go/no‑go functional inspection) Category: gauges / ring gauge Special features Hardened, wear‑resistant gauge steel Compact and lightweight for manual handling Suitable for inline and incoming inspection SKU: M315.205.2 FAQ What does this ring gauge check? The ring gauge checks the functional fit of M5 x 0.5 metric fine threads against the DIN 13, 6g acceptance band to provide a clear go/no‑go result. Is the gauge suitable for production use? Yes; the hardened gauge steel construction and DIN 13 conformity make the gauge appropriate for repeated production checks and incoming‑part inspection. Can the gauge be used on left‑hand threads? This particular ring gauge is manufactured for right‑hand threads; left‑hand threads require a correspondingly oriented gauge. How is the tolerance class interpreted? The 6g class specifies the allowable geometric tolerance band for the external thread; a match to the same tolerance class ensures compatibility with mating internal threads specified to the same class. Which part number identifies this tool? The tool is listed under SKU M315.205.2 and belongs to the Metav IndustryLine range for gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5 x 0.5 Thread Ring Gauge Right-Hand ISO Metric 6g Hardened Gauge Steel DIN 13 - Metav IndustryLine
Benefit from hardened gauge steel, DIN 13 tolerance class 6g and exact M5 x 0.5 thread verification to keep quality control fast and repeatable; order the gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread gauge ring M5 x 0.5 (DIN 13, 6g) – Metav IndustryLine A Thread gauge ring M5 x 0.5 designed for quick verification of metric ISO fine threads in production and inspection environments, suited to right-hand threads and routine quality control. Hardened gauge steel construction DIN 13 tolerance class 6g M5 x 0.5 metric fine thread check Right-hand go gauge for inspection Fast assurance of threaded parts conformity The ring gauge provides a straightforward, rapid method to confirm that internal or mating threads meet specification. Made as a go gauge for the M5 x 0.5 pitch, it reduces decision time at the inspection station and supports consistent assembly quality. The instrument’s compliance with DIN 13 and designation 6g means it verifies the commonly required industrial tolerance class, helping to avoid field failures and minimise rework. Reliable construction for repeated use Manufactured from hardened gauge steel, the tool is built to withstand frequent handling in a workshop or production line. Its compact, lightweight design (approx. 0.01 kg) reduces operator fatigue and makes storage and handling simple. The hardened finish maintains the critical thread form over many cycles, ensuring that the gauge remains a repeatable reference for long-term process control. Clear benefit for production efficiency Using a dedicated ring gauge accelerates inspection throughput by eliminating subjective assessment and providing an immediate accept/reject outcome. The mechanical verification complements dimensional measurement tools by offering a pass/fail control that is simple to document and integrate into standard operating procedures. This direct approach supports faster line speeds and consistent assembly tolerances. Designed for metric ISO fine-thread applications Intended specifically for metric ISO fine threads, the gauge suits applications where the M5 x 0.5 size is common — for example, small assemblies, precision components and fastener checks in mechanical subassemblies. The right-hand configuration aligns with standard threaded parts; the designation as a "go" gauge confirms acceptable functional fit rather than providing a measurement value, which is ideal for production screening. Practical integration into quality workflows The ring gauge is a pragmatic addition to any inspection kit: compact enough for a pick-and-place station, robust enough for shop-floor use, and precise enough to support traceable quality routines. When used alongside calibrated measurement instruments, the gauge helps to maintain a layered verification strategy that combines quick functional checks with periodic dimensional sampling for statistical process control. For reliable thread verification and straightforward procurement of the Metav IndustryLine gauge, contact Metav Werkzeuge for ordering or technical guidance: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: M315.105.2 GTIN: 4054469123776 Weight: 0.01 kg Material: hardened gauge steel Standard: DIN 13, 6g Size: M5 x 0.5 Customs tariff number: 90173000 Facts Metric thread size M5 x 0.5 Tolerance class 6g Right-hand thread Category: Gauges / Go gauge Special features Go (gut) ring for quick pass/fail checks Lightweight, workshop-suitable design For metric ISO fine-thread verification Durable hardened steel construction FAQ How is the M5 x 0.5 ring gauge intended to be used? The ring gauge is used as a go gauge to confirm that mating threads accept the specified M5 x 0.5 metric fine screw without interference; the Thread gauge ring M5 x 0.5 (Metav IndustryLine, SKU M315.105.2) gives an immediate accept result for compliant parts. What does the DIN 13, 6g marking mean for inspection? DIN 13 with tolerance class 6g specifies the nominal form and tolerance band for metric ISO threads; the marking indicates that the gauge checks parts against that industrial standard for interchangeability. Can this gauge be used on left-hand threads? This particular ring gauge is manufactured for right-hand threads; left-hand versions must be specified separately for correct verification. How durable is the gauge under regular shop-floor use? Constructed from hardened gauge steel, the ring gauge is designed for repeated handling and long service life, maintaining thread form across numerous inspection cycles. Is the ring gauge suitable for automated inspection stations? Yes, the compact and lightweight design allows easy integration into manual and semi-automated inspection workflows where a go/no-go functional check is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5 x 0.75 Thread Plug Gauge, Right-Hand, Go, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Taking advantage of a compact, standardised control tool and hardened gauge steel, this Go ring ensures reliable pass/fail assessment of M5 × 0.75 metric fine threads; combine straightforward handling with DIN‑compliant tolerancing for consistent production quality. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Go thread ring gauge M5 x 0.75 — DIN 13 / 6g, hardened gauge steel (Metav IndustryLine) A Go thread ring gauge M5 x 0.75 for fast verification of metric ISO fine external threads in production and incoming inspection Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Intended for metric ISO fine threads Fast, unambiguous thread control for series production The Go ring offers a simple, reliable method for pass/fail thread inspection, reducing downtime in machining and assembly. Designed for rapid checks, the gauge verifies the external thread form and major diameter for an M5 × 0.75 metric fine thread; a correct thread will engage the ring smoothly without play. By converting dimensional tolerances into a binary result, the device accelerates quality decisions and lowers scrap rates while keeping process control straightforward and repeatable. Durable materials and standards for reproducible results Constructed from hardened gauge steel, the ring resists wear and maintains dimensional integrity under continuous use. Manufactured to DIN 13 with tolerance class 6g, the gauge matches common metric ISO fine-thread standards, ensuring compatibility with typical engineering tolerances. The right‑hand orientation is suitable for standard external threads used across mechanical assemblies. These characteristics combine to provide durable, long‑term measurement stability that supports consistent product quality. Practical guidance for correct handling and interpretation Use the ring by engaging it with the threaded part under moderate, consistent manual force—gentle rotation should confirm fit without excessive force. If the ring screws on to the intended location smoothly, the thread passes; if it binds or refuses to engage, the component requires rework or rejection. The tool’s compact form and low mass make it convenient for bench inspection and at‑machine checks, enabling quick sampling without complex setup. Regular comparison against a calibrated master is recommended to preserve measurement certainty. Where this gauge brings value in the workshop Suitable for production lines, final inspection and incoming goods checks, the gauge supports fast decision-making in small‑batch and series manufacture. Its compact size and robust material make it practical for toolrooms and maintenance teams who need dependable, repeatable checks. By converting dimensional accuracy into an immediate result, the ring reduces inspection time and helps maintain consistent assembly quality across shifts. Secure the Metav IndustryLine Go thread ring gauge M5 x 0.75 from Metav Werkzeuge for dependable thread control—our specialists at Metav Werkzeuge can advise on suitability and supply; contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. Technical data Article number: M315.105.3 GTIN: 4054469123783 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Thread size: M5 × 0.75 Tolerance class: 6g Mass: 0.01 kg Special features Material: hardened gauge steel Standard: DIN 13 Type: Go (pass) ring gauge Right‑hand thread orientation Category: Gauges / Thread gauges FAQ What does a Go ring gauge check for? A Go ring gauge verifies that an external metric thread, such as the M5 × 0.75 ring, meets the specified major diameter and form within the allowed tolerance so the part can be accepted. Is this gauge suitable for quality control in production? Yes, the Metav IndustryLine Go thread ring gauge M5 × 0.75 is intended for rapid pass/fail checks in production and incoming inspection where DIN 13, 6g tolerancing is required. How should wear be monitored on the gauge? Monitor the gauge by periodic comparison with a reference master or during scheduled tool checks; any loss of smooth engagement indicates it should be withdrawn for inspection or replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5 x 0.75 Thread Ring Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take clear control of thread quality with a hardened gauge steel construction and DIN‑compliant tolerance class; the compact, right‑hand M5 x 0.75 thread ring gauge ensures fast, repeatable verification at the inspection stage. Order directly via Metav Werkzeuge or consult the Metav team for application guidance. Gewinde‑Lehrring M5 x 0.75 mm (no‑go) — Metav IndustryLine thread ring gauge, hardened steel The Gewinde‑Lehrring M5 x 0.75 mm Aussch. is a no‑go ring gauge for metric ISO fine threads, intended for dimensional control and production inspection in mechanical workshops and assembly lines. Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g For metric ISO fine thread M5 x 0.75 right‑hand Compact, light body at 0.01 kg Accurate assurance for threaded parts leaving production This ring gauge offers a straightforward, rational method to verify whether a threaded part meets the specified fit class. Made as a no‑go ring gauge, it signals rejects without interpretation, which reduces inspection time and removes variability from subjective checks. The hardened gauge steel body resists wear over repeated use, so dimensional integrity is maintained across production runs and fewer replacements are needed — a clear efficiency gain for process stability. Standards and material that support repeatable results Manufactured in accordance with DIN 13 and marked to tolerance class 6g, the device provides traceable conformity with common engineering standards for metric threads. The combination of the standardised tolerance and the hardened steel material means the gauge delivers consistent contact geometry and predictable service life; this results in fewer measurement deviations and a lower rate of false rejects, supporting reproducible quality control in batch production. Shop‑floor usability and practical benefits The compact mass and simple 'pass/fail' nature of the gauge make it ideal for fast inline checks or bench inspection. The ring’s right‑hand configuration and the nominal designation M5 x 0.75 match typical fine‑thread fasteners used in precision assemblies, allowing quick decisions without complex setup. Operators gain speed and clarity in inspection tasks, while process engineers benefit from reduced scrap and clearer feedback on tooling or thread‑cutting parameters. Integration into quality workflows and procurement ease As part of the Metav IndustryLine, this gauge fits into a broader supply strategy that emphasises accessibility and dependable stock. The small footprint and low weight make storage and handling straightforward, and the fixed geometry of the no‑go ring simplifies calibration planning and replacement cycles. For organisations seeking to standardise thread inspection, the ring gauge provides a compact, standards‑aligned element that dovetails with documented quality procedures. Choose the Metav IndustryLine Gewinde‑Lehrring for consistent thread control — contact Metav Werkzeuge GmbH in Emmerich for application advice and supply (+49 2822 7131930, info@metav-werkzeuge.com) Technical data Article number: M315.205.3 GTIN: 4054469125459 Weight: 0.01 kg Material: Gauge steel, hardened Standard: DIN 13, 6g Thread size: M5 x 0.75 Facts Thread nominal: M5 Pitch: 0.75 mm Tolerance class: 6g Tariff number: 90173000 Special features Right‑hand thread No‑go (reject) ring gauge Category: Lehren, Messstifte FAQ What is the purpose of this ring gauge? The Gewinde‑Lehrring M5 x 0.75 mm Aussch. is designed as a no‑go ring gauge to determine whether a metric ISO fine thread falls outside the permitted tolerance; it enables immediate pass/fail decisions in production. Which tolerance and standard does the gauge follow? This Metav IndustryLine ring gauge conforms to DIN 13 with a tolerance class of 6g, ensuring standardised assessment of fine threads for mechanical components. What material is used and why does it matter? The ring gauge is made from hardened gauge steel; the hardness ensures wear resistance and long‑term dimensional stability, which preserves measurement reliability over many inspection cycles. Can this gauge be used for left‑hand threads? No; the supplied ring gauge is specified for right‑hand threads only and is intended for M5 x 0.75 metric fine thread verification. How does the no‑go gauge affect inspection workflow? As a no‑go tool, it removes ambiguity by indicating out‑of‑tolerance threads immediately, simplifying operator decisions and improving throughput in quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5 x 0.8 mm Go Thread Ring Gauge, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge steel construction combined with strict DIN 13 / 6g conformity to secure reliable thread inspection in production. The compact M5 × 0.8 mm ring gauge ensures quick Go/No‑Go verification and consistent quality control; order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Thread Ring Gauge M5 × 0.8 mm — DIN 13, 6g, hardened gauge steel A Thread Ring Gauge M5 × 0.8 mm for fast inspection of metric ISO right‑hand external threads in production and quality control environments *DIN 13 compliant, tolerance zone 6g *For metric ISO threads M5 × 0.8 mm *Hardened gauge steel construction *Right‑hand thread inspection Assured conformity to DIN 13 for repeatable results A hardened no‑go ring gauge designed to the DIN 13 specification provides a straightforward, binary check that an external thread remains within its maximum material condition. Used as part of routine incoming inspection or on the shop floor, this inspection gauge cuts measurement time by eliminating subjective judgement: a clearance indicates conformity, a refusal indicates oversize. The 6g tolerance zone is matched to common ISO metric thread practice, ensuring compatibility with standard production tolerances and helping to reduce scrap rates by catching out‑of‑tolerance parts before assembly. Durable construction for high throughput inspection Manufactured from hardened gauge steel, the ring withstands repeated engagement with threaded parts while maintaining its reference form. The robust material choice limits wear and preserves the functional limit for longer intervals between verification cycles, which supports continuous production environments. Lightweight handling combined with a compact profile makes the gauge suitable for repetitive checks without sacrificing stiffness; the result is a tool that delivers consistent pass/fail decisions under frequent use and contributes to stable process capability. Practical use and integration into quality workflows This inspection tool performs a simple, reliable check: the ring must not thread on when used as a no‑go gauge, which confirms whether an external thread exceeds allowable limits. Its compact format is suitable for bench inspection, assembly checks and quick in‑line control. Marking and traceability of individual gauges facilitate audit trails; the ring can be integrated into standard operating procedures and inspection plans, supporting traceable quality assurance and documented compliance across batches. Secure thread conformity with Metav IndustryLine's hardened M5 ring gauge — contact Metav Werkzeuge for detailed application guidance or to request delivery options Technical data Article number: M315.205 GTIN: 4054469125428 Weight: 0.1 kg Facts Thread size: M5 × 0.8 mm Tolerance zone: 6g Standard: DIN 13 Tariff number: 90173000 Materials & features Material: hardened gauge steel Type: no‑go ring gauge for external threads Thread direction: right‑hand Brand: Metav IndustryLine FAQ How is the M315.205 ring gauge used in routine inspection? The M315.205 ring gauge is applied as a no‑go check: if the ring threads onto the workpiece, the external thread exceeds the permitted tolerance and must be rejected or reworked. Does this ring gauge conform to recognised standards? Yes, the ring gauge is manufactured to DIN 13 with a 6g tolerance zone and is suitable for standard metric ISO thread inspection tasks. What materials and conditions suit this gauge? Constructed from hardened gauge steel, the gauge is intended for repetitive thread checks in typical workshop and production environments; it is not a measuring instrument for dimensional read‑outs but a functional limit gauge. Can the ring gauge be used on left‑hand threads? This ring gauge is specified for right‑hand metric threads; for left‑hand applications, a correspondingly specified gauge must be used. How often should the gauge be verified for wear? Verification intervals depend on usage frequency and process criticality; establish a check schedule within the quality plan and compare the gauge against a calibrated master to confirm continued suitability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M50 x 2 mm Go Thread Gauge, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge-steel design and DIN‑13, 6g tolerance for fast, repeatable checks of metric ISO fine external threads; order directly via Metav Werkzeuge or consult Metav's specialists for application advice. Thread ring gauge M50 x 2 mm (M315.250.7) — hardened gauge steel, DIN 13, 6g The Thread ring gauge M50 x 2 mm (M315.250.7) is a precision inspection gauge for metric ISO fine external threads, manufactured for right‑hand threads and intended for production and incoming‑goods checks. Hardened gauge steel construction DIN 13 tolerance grade 6g For metric ISO fine thread M50 x 2 Consistent thread quality at production speed A thread ring gauge of this type provides an efficient go/no‑go control that shortens inspection cycles while keeping acceptance criteria clear. Made from hardened gauge steel, the gauge resists wear over sustained use so that M50 x 2 mm threads can be verified repeatedly without rapid tolerance drift. Conformance to DIN 13 with a 6g tolerance grade ensures compatibility with common engineering tolerances and supports consistent pass/fail decisions on the shop floor, reducing rework and stabilising throughput. Traceable conformity and robust construction for long service life The gauge is engineered to retain dimensional stability under routine handling. The combination of hardened material and standardised tolerance class results in a robust inspection tool that maintains reproducible results across production batches. The clear specification to DIN 13 and 6g provides a verifiable technical basis for quality documentation, helping to align inspection records with supplier and customer requirements while prolonging service intervals for the inspection equipment itself. Practical integration into workshop inspection routines Lightweight and compact, this right‑hand thread ring gauge is straightforward to store and deploy at incoming inspection, assembly stations or final checks. At approximately 1.0 kg it is easy to handle during rapid checks and simple to clean and protect between uses. The tool is suitable for standardised go/no‑go verification of external threads in metalworking environments and complements other inspection equipment by delivering an immediate, objective acceptance criterion that streamlines quality control workflows. For reliable, DIN‑compliant thread inspection and supply logistics, contact Metav Werkzeuge (Metav IndustryLine) in Emmerich for precise delivery and product selection support. Technical data Article number: M315.250.7 GTIN: 4054469126791 SKU: M315.250.7 Net weight: 1.0 kg Facts Thread size: M50 x 2 mm Tolerance: 6g (DIN 13) Tariff number: 90173000 Special features Material: hardened gauge steel Right‑hand thread Conforms to metric ISO fine thread standards Category: thread ring gauge Brand line: Metav IndustryLine FAQ How is the gauge used to check threads? The thread ring gauge M50 x 2 mm (M315.250.7) is used as a go/no‑go verifier for external threads; a correct external thread will pass the “go” side while the “no‑go” side prevents acceptance of undersized or damaged threads. What tolerance and standard apply to this gauge? The gauge is manufactured to DIN 13 with a tolerance grade of 6g, which defines the acceptance limits for metric ISO fine external threads. What material is the gauge made from? This inspection tool is produced from hardened gauge steel, selected for wear resistance and dimensional stability during repeated use. Is the thread direction specified? Yes, the gauge is intended for right‑hand external threads and is labelled accordingly for correct application. Is a calibration certificate supplied with the gauge? A formal calibration certificate is not included by default unless specified; the gauge is produced to DIN 13 tolerances and calibration options can be requested separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M50x1 Thread Go Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Reliable thread conformity and hardened gauge‑steel construction provide consistent pass/fail results; the DIN 13 tolerance class 6g and right‑hand metric ISO fine‑thread specification minimise scrap and rework. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M50 x 1.0 mm – no‑go, DIN 13, 6g, Metav IndustryLine The thread ring gauge M50 x 1.0 mm is a hardened steel no‑go master intended for quick verification of metric ISO fine threads in production inspection and quality control. Hardened gauge steel construction DIN 13 tolerance class 6g Right‑hand metric ISO fine thread Compact, shop‑floor ready design Ensure reproducible pass/fail decisions on the line A dedicated no‑go ring gauge simplifies routine checks by delivering an unequivocal inspection criterion: if the gauge does not engage, the thread fails the profile or pitch‑diameter limits defined by DIN 13. This direct go/no‑go approach reduces interpretation error and shortens cycle time during batch inspections. Using a fixed master eliminates the variability introduced by subjective measurement techniques and supports consistent quality documentation for serial production. Durable materials for low lifecycle cost Manufactured from hardened gauge steel, the device resists wear and retains form accuracy under repeated use, which translates into fewer replacements and lower tooling costs. The modest mass (1.0 kg) provides good contact stability without being cumbersome to handle, while the compact ring form factor suits bench or fixture inspection. The robust material choice ensures measurement behaviour remains stable across typical shop environments and cleaning cycles. Fast integration into existing inspection routines The gauge is delivered as a clearly identified inspection master suitable for use alongside calipers and gauges in the workshop. Its M50 x 1.0 mm designation and 6g tolerance class match common drawing specifications for metric ISO fine threads, enabling direct comparison with part documentation. The right‑hand orientation aligns with standard production threads; the explicit no‑go designation supports rapid separation of non‑conforming parts and reduces downstream rework. For traceable, shop‑ready thread control choose Metav IndustryLine — contact Metav Werkzeuge in Emmerich for application advice and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.250.4 GTIN: 4054469126777 Label: Gewinde‑Lehrring M50 x 1 mm Aussch. DIN 13, f. metr. ISO‑Feingewinde, rechts Net weight: 1.0 kg Facts Thread size: M50 x 1.0 mm Tolerance/class: 6g (DIN 13) Tariff number: 90173000 Mass: 1.0 kg Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Designation: no‑go (Ausschuss) Eclass: 21170214 FAQ How is a no‑go ring gauge used to inspect threads? A no‑go ring gauge is pushed onto the thread; engagement indicates acceptable pitch and profile while failure to fit signals a reject — the thread ring gauge M50 x 1.0 mm is intended precisely for this quick go/no‑go verification against DIN 13 criteria. Which tolerance and standard does this gauge follow? The gauge corresponds to DIN 13 and the tolerance class 6g, matching typical metric ISO fine‑thread specifications for production inspection. What material is the gauge made from and how long will it last? Made from hardened gauge steel, the ring gauge is designed for repeated shop‑floor use and long service life when handled and stored correctly. Can this gauge be used in an automated inspection station? The compact, hardened design and clear nominal designation make the device suitable for integration into manual or semi‑automated inspection routines as a fixed reference. What identification is provided for traceability? The item is supplied with the stock identifiers (SKU M315.250.4, GTIN 4054469126777), allowing traceable recording in quality systems and inventory lists. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M50x1 Thread Go/No-Go Plug Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of precise, fast thread verification combined with hardened gauge‑steel durability for reliable production acceptance. Order directly from Metav Werkzeuge or contact our advisors for application support and delivery details. Limit thread plug gauge M50 x 1 — Metric ISO fine thread, DIN 13 6H (Metav IndustryLine) The Limit thread plug gauge M50 x 1 is a right‑hand plug gauge designed for acceptance testing of metric ISO fine threads in production and inspection environments. Limit thread plug gauge M50 x 1 Conforms to DIN 13 tolerance 6H Hardened gauge steel construction Right‑hand thread verification tool Speed up acceptance checks with clear go/no‑go results The gauge delivers instant, unambiguous verification of internal threads using a classic limit (go/no‑go) principle, which eliminates interpretation time at the inspection station. Acceptance is determined by the go side entering freely and the no‑go side not entering, allowing rapid decisions that reduce downtime and rework. The clear binary outcome supports a lean quality workflow and improves throughput on repetitive inspections. Robust build for long service life and consistent measurement Constructed from hardened gauge steel, the plug gauge resists wear under repeated use and maintains form stability over time. The substantial mass (approx. 1.3 kg) and solid construction reduce sensitivity to handling variation, making the tool less prone to knock‑out errors. This mechanical resilience translates into fewer replacements and lower total cost of ownership for routine thread inspection tasks. Certified tolerance class and traceable conformity for quality assurance Manufactured to DIN 13 with a tolerance class of 6H, the gauge is matched to standard metric ISO fine‑thread tolerances; 6H denotes the internal thread tolerance for general engineering use and ensures compatibility with mating external threads produced to corresponding tolerance classes. Using a limit plug gauge conforming to these standards facilitates clear documentation during quality audits and supports consistent component interchangeability. Practical integration into workshop inspection routines The plug gauge is immediately usable at bench or in incoming‑goods inspection; its compact form factor suits manual handling and small inspection benches. The tool requires minimal maintenance—periodic visual checks and protected storage prolong service life—and can be incorporated into regular calibration schedules for traceability. For high‑volume environments, the gauge provides a dependable first‑stage control before more elaborate dimensional checks. For dependable thread inspection with Metav IndustryLine quality, contact Metav Werkzeuge for order processing or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.050.4 GTIN: 4054469123448 SKU: M315.050.4 Manufacturer: Metav IndustryLine Facts Thread size: M50 x 1 mm Pitch: 1 mm Tolerance class: 6H Weight: 1.3 kg Customs tariff number: 90173000 Special features Right‑hand metric ISO fine thread verification Limit plug gauge (go/no‑go principle) Material: gauge steel, hardened Conforms to DIN 13 FAQ What thread size does this gauge check? The limit thread plug gauge checks M50 x 1 internal threads; the pitch is 1 mm and the tool is intended for metric ISO fine‑thread inspection. Which tolerance class is covered by the gauge? This gauge is manufactured to DIN 13 with a tolerance class of 6H, suitable for standard internal thread acceptance in engineering applications. Is the gauge suitable for production inline checks? Yes; the plug gauge’s go/no‑go principle provides rapid pass/fail results that are ideal for inline or incoming‑goods controls, helping to reduce inspection time. What material is the gauge made from and how durable is it? Made from hardened gauge steel, the gauge offers high wear resistance and long service life under normal inspection use. How should the gauge be stored and maintained? Store the gauge in a dry, protected place to avoid corrosion and mechanical damage; routine visual inspection and inclusion in a calibration schedule are recommended for traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M50x1.5 Thread Go/No-Go Plug Right-Hand Metric ISO Fine Thread, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Choose the combination of hardened gauge steel and strict DIN 13, 6H tolerance for fast, unambiguous thread acceptance; the right‑hand M50 x 1.5 limit gauge provides immediate go/no‑go verification. Order the instrument directly via Metav Werkzeuge or consult Metav's specialists for application advice. Limit thread gauge mandrel M50 x 1.5 (metric ISO fine thread, right‑hand) — Metav IndustryLine The Limit thread gauge mandrel M50 x 1.5 is a hardened limit gauge for quick verification of metric ISO fine threads (DIN 13, 6H), designed for production inspection and incoming‑goods testing Metric ISO fine thread M50 x 1.5 Hardened gauge steel construction Tolerance to DIN 13, 6H Right‑hand limit gauge for go/no‑go checks Fast conformity checks that reduce throughput risk A limit gauge offers an efficient pass/fail decision directly at the production line or inspection bench. By combining the standardised DIN 13 tolerance class 6H with a dedicated mandrel geometry, the instrument provides clear, reproducible verification of internal mating threads. This eliminates ambiguity in acceptance decisions and reduces the chance of downstream rework or scrap, which translates into measurable savings in production time and quality control resources. The design is intended for repeated use in routine checks, so cycle time and ease of interpretation are prioritised over elaborate measuring procedures. Durable design for continuous workshop use Constructed from hardened gauge steel, the mandrel resists wear and maintains its profile over many inspection cycles, supporting consistent results and a longer service life. The solid build and the specified mass of 1.3 kg give the tool a reassuring feel and mechanical stability during engagement with a component, reducing the influence of handling variation. The right‑hand configuration and clearly defined limit faces enable quick tactile feedback during go/no‑go tests, which is especially helpful in busy production environments where speed and reliability matter. Integrates with quality workflows and inspection routines The mandrel functions as a straightforward acceptance device within standard inspection plans and first‑piece checks. As a limit gauge it complements dimensional measuring equipment by giving an immediate conformity verdict, making it suitable for incoming inspection, in‑process control and final checks. The compact nature of the tool supports handheld operation or placement in a dedicated test fixture; its clear go/no‑go result simplifies documentation and reduces operator training time. The item is supplied as a purpose‑built thread verification tool ready for shop‑floor use. Contact Metav Werkzeuge today to discuss suitability for specific thread tolerances and integration into your inspection routines — Metav IndustryLine specialists can advise on selection and supply. Technical Data Article number: M315.050.6 GTIN: 4054469123455 Weight: 1.3 kg Material: gauge steel, hardened Standard: DIN 13, 6H Facts Thread size: M50 × 1.5 Tariff number: 90173000 eCl@ss: 21170235 SKU: M315.050.6 Special features Right‑hand metric ISO fine thread mandrel Limit gauge for go/no‑go verification Robust, hardened construction for repeated use Category: gauges / limit gauges FAQ What standard does this mandrel conform to? The limit thread gauge mandrel conforms to DIN 13, tolerance class 6H, ensuring compatibility with metric ISO fine‑thread specifications for acceptance testing. Which materials is the gauge intended to check? The mandrel is a verification tool for threaded parts; it checks the form and size of mating threads rather than material properties. It is therefore suitable for inspection of components regardless of substrate, provided the thread was manufactured to metric ISO parameters. Is the gauge suitable for inline production checks? Yes, the M50 × 1.5 right‑hand limit gauge is designed for quick go/no‑go decisions at the production line or inspection bench and integrates easily into routine sampling plans. How is wear resistance achieved in this tool? Wear resistance is provided by the hardened gauge steel construction, which preserves the thread profile and prolongs the service life of the verification mandrel. What is the product identifier for ordering and documentation? The item is listed as the Limit thread gauge mandrel M50 x 1.5, Metav IndustryLine, SKU M315.050.6; use this identifier for procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M50x1.5 Thread Plug Gauge ISO Fine Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise DIN 13 tolerance control and robust hardened gauge steel construction for dependable thread inspection; the compact 1.0 kg design supports easy handling and repeatable checks. Order the thread ring gauge directly via Metav Werkzeuge or consult our technical advisors for application support. Thread ring gauge M50 x 1.5 mm — right-hand metric ISO fine thread, DIN 13, 6g Thread ring gauge M50 x 1.5 mm for fast, repeatable verification of external metric fine threads in production and quality control DIN 13 tolerance class 6g Hardened gauge steel construction For M50 x 1.5 metric fine thread Reliable thread control that reduces rework and stoppages The ring provides a straightforward, binary inspection method that separates acceptable parts from rejects at the production line. By matching the DIN 13 standard and the 6g tolerance class, the gauge enables rapid verification of external threads to a recognised specification. The clear pass/fail result shortens inspection cycles and helps maintain process stability, which in turn reduces rework and unplanned downtime. Durable materials for consistent measurements over time Manufactured from hardened gauge steel, the gauge resists wear during repeated engagement and maintains dimensional stability. This material choice preserves thread form and gauge integrity, ensuring that measurement drift is minimised even under frequent use. The compact mass of 1.0 kg contributes to practical handling while offering enough substance for steady engagement during manual checks. Simple integration into existing inspection routines Designed for direct use at the workstation, the ring supports quick in-process checks without auxiliary fixtures. Where a clear go/no-go decision is required, the gauge streamlines quality gates and inspection plans, providing a verified control point before further assembly or shipment. Its compatibility with metric ISO fine threads makes it suitable for automotive, gear and precision engineering components. Clear technical specification aids traceability and documentation The dimensional and standard conformity to DIN 13 simplifies documentation and audit trails: inspection records can reference the tolerance class and nominal thread size for traceable acceptance criteria. For processes that rely on documented conformity, the gauge supplies an unambiguous inspection result that integrates easily into quality records and control charts. Handling and storage advice to preserve accuracy To retain measurement reliability, store the gauge in a dry, protected environment and avoid impacts that could deform the thread form. Regular visual inspection for wear and scheduled comparison against a master standard will extend service life. Where calibration workflows exist, incorporate the ring into routine checks to verify ongoing conformance to the stated tolerance class. Contact Metav Werkzeuge for tailored advice on implementing DIN 13 thread control; our Emmerich-based specialists will recommend the right gauges and logistics for your production needs. Technical data SKU: M315.250.6 GTIN: 4054469126784 Thread: M50 x 1.5 mm Material: hardened gauge steel Standard: DIN 13, 6g Weight: 1.0 kg Core measurements Nominal diameter: 50 mm Pitch: 1.5 mm Tolerance class: 6g Weight: 1.0 kg Commodity code: 90173000 Features For metric ISO fine threads Right-hand thread checking Hardened gauge steel Suitable for external thread inspection Category: Gauges / Thread ring gauge FAQ What does the 6g tolerance class mean for thread acceptance? The 6g tolerance class defines the dimensional allowance and clearance for external threads; the thread ring gauge M50 x 1.5 mm (Metav IndustryLine, SKU M315.250.6) is manufactured to this class to provide clear go/no-go verification against that standard. Is this gauge suitable for production-line checks on fine threads? Yes, the ring gauge is intended for fast, repeatable inspection of M50 x 1.5 mm metric fine threads and is well suited to in-process checks where a binary acceptance decision is required. How should the gauge be stored to maintain accuracy? Store the gauge in a dry, protected area away from mechanical shocks; routine visual checks and comparison to a master reference will help maintain the performance of the Metav IndustryLine thread ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M50x2 Thread Go Ring Gauge Metric ISO Fine Right-Handed Hardened Gauge DIN 13, 6g - Metav IndustryLine
Take advantage of the combination of recognised DIN conformity, hardened gauge steel and a compact, stable form for fast thread verification in production or inspection. Order the ring gauge directly via Metav Werkzeuge or consult Metav's specialists for application advice. Thread ring gauge M50 x 2 mm (Go) – Go gauge for metric ISO fine thread, DIN 13, 6g (Metav IndustryLine) A Thread ring gauge M50 x 2 mm (Go) designed to verify right-hand metric ISO fine threads quickly and reliably in workshop inspection and production control. DIN 13, 6g tolerance for metric ISO threads Hardened gauge steel, precision ground Right-hand fine thread M50 x 2 mm Go gauge Robust 1.8 kg construction for stable handling Fast verification with standardised accuracy The ring gauge is made for efficient pass/fail checks on internal threads: the Go gauge confirms whether a threaded bore meets the permitted dimensional and form tolerances according to DIN 13, 6g. Manufactured from hardened gauge steel and precision ground, the gauge provides a repeatable contact surface that resists wear and keeps tolerances stable over many inspection cycles. This makes it a practical instrument for routine quality control where time per inspection and traceable conformity to standards are decisive factors. Stable handling reduces measurement uncertainty At a weight of 1.8 kg, the ring gauge offers a mass that promotes stable seating in the bore and reduces the risk of wobble during the Go check; this helps to shorten cycle times and lower scrap rates. The compact, single-purpose design of the inspection ring simplifies operation: passage of the M50 x 2 mm thread is an immediate indication of conformity, eliminating the need for complex measuring setups for each check. The robust construction supports frequent use on the shop floor while maintaining dimensional integrity. Built for workshop use and reliable supply Produced in line with common metrology practice for thread gauges, the component is suitable for use wherever metric ISO fine threads must be verified against a 6g tolerance class. As part of Metav IndustryLine, the gauge benefits from Metav's market role as a quality filter and distribution point for European industry — a reassurance when standard conformity and dependable availability matter. For bespoke inspection regimes or integration into existing quality documentation, the ring gauge serves as a straightforward, verifiable control point that complements broader measurement strategies. For fast procurement and technical guidance on Metav IndustryLine's hardened thread gauges, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: M315.150.7 GTIN: 4054469125138 Label: Gewinde-Lehrring M50 x 2 mm gut DIN 13, f. metr. ISO-Feingewinde, rechts Material: Gauge steel, hardened Standard: DIN 13, 6g Facts Weight: 1.8 kg Thread size: M50 x 2 mm Tolerance class: 6g Tariff number: 90173000 Special features Go (pass) ring gauge Precision-ground thread profile Right-hand metric ISO fine thread Category: Thread inspection gauge FAQ What does the 'Go' designation mean for this ring gauge? The Go designation indicates the ring gauge is a pass gauge: the Thread ring gauge M50 x 2 mm (Go) must enter and run freely on a compliant internal thread, confirming that the bore meets the allowed maximum material limits per DIN 13, 6g. Which threads can be verified with this gauge? This ring is intended for right-hand metric ISO fine threads with the nominal size M50 x 2 mm; it checks conformity to the 6g tolerance class specified in DIN 13. How does the material influence gauge longevity? Constructed from hardened gauge steel and finished by precision grinding, the gauge resists wear and preserves the contact profile, which extends service life and sustains measurement reliability under regular inspection use. Is this gauge suitable for routine shop‑floor inspection? Yes. The robust construction and stable mass of 1.8 kg make the gauge well suited for repeated Go checks in production or incoming inspection, offering quick pass/fail verification without elaborate setup. Can the gauge be used as a reference for calibration intervals? The ring gauge provides a reproducible check point for thread conformity; calibration planning should follow internal quality procedures and relevant standards to establish appropriate intervals based on use and wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M50x2 Thread Limit Gauge For Metric ISO Fine Thread Right-Hand, Hardened Go/No-Go, DIN 13 6H - Metav IndustryLine
Product data contains contradictory information regarding its quality status. This inconsistency may lead to confusion or errors in the final product description. To ensure accuracy and reliability, it is essential to review and correct the inconsistent source data thoroughly. Addressing these discrepancies will help maintain the integrity of the product information and prevent potential issues during the description generation process. Please prioritise the verification and rectification of the conflicting details to enable the creation of a comprehensive and accurate product description that meets the required standards.
M50×1 mm Thread Ring Gauge Metric ISO Fine Thread Right-Hand, Grade 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of accurate acceptance testing (DIN 13, 6g), hardened gauge‑steel durability, and a compact design optimised for fast shop‑floor inspection. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants for application advice. Thread ring gauge M50 x 1 mm 'Go' — DIN 13, hardened gauge steel | Metav IndustryLine A Thread ring gauge M50 x 1 mm 'Go' for rapid acceptance testing of right‑hand metric ISO fine threads in workshop and quality‑control environments DIN 13 tolerance class 6g for metric ISO threads Hardened gauge steel for long‑term dimensional stability M50 x 1 mm right‑hand metric fine thread Go gauge Suited to workshop and laboratory inspection Rapid acceptance checks that reduce rework The M50 x 1 mm 'Go' ring gauge is designed for straightforward pass/fail inspection of right‑hand metric ISO fine threads. As a Go gauge it confirms whether an external thread falls within the specified DIN 13 tolerance (class 6g), which makes it a practical tool for incoming inspection and final checks. The clear functional role of the gauge shortens decision loops on the shop floor and reduces time spent on dimensional analysis, improving throughput without adding measurement complexity. Durable construction for repeated shop‑floor use Manufactured from hardened gauge steel, the ring gauge resists wear from frequent engagement and maintains dimensional stability over many cycles. The material choice and heat treatment deliver consistent contact geometry and surface hardness, which minimises the need for frequent replacement. For operations that run continuous batches, this robustness translates into fewer interruptions and lower lifetime maintenance costs while preserving measurement reliability. Standards compliance for trusted quality control Conformity to DIN 13 with the specified 6g tolerance class ensures the gauge integrates seamlessly into established quality processes. The ring gauge provides a reproducible criterion for thread acceptance that aligns with common engineering standards for metric ISO fine threads. Using a standardised acceptance tool reduces interpretation differences between operators and supports transparent reporting in quality documentation. Efficient handling and practical application The gauge’s nominal size and right‑hand configuration make it easy to use during rapid inspections: screw the mating thread into the go ring; a satisfactory fit indicates compliance, while any binding or refusal signals deviation. The compact, compact‑mass design and single‑function acceptance testing minimise operator training and speed up routine checks. For specialised cases or unusual thread fits, technical advice is available to ensure the correct gauge strategy is applied Contact Metav Werkzeuge today for ordering information or for tailored advice on integrating this Metav IndustryLine ring gauge into existing inspection workflows. Technical data Article number: M315.150.4 GTIN: 4054469125114 Customs tariff number: 90173000 Data Thread size: M50 x 1 mm Tolerance class: 6g Weight: 1.8 kg Special features Material: hardened gauge steel Standard: DIN 13 Type: right‑hand metric ISO fine thread Go ring gauge Category: gauges / inspection tools FAQ What is the purpose of this ring gauge? The Thread ring gauge M50 x 1 mm 'Go' serves as a pass/fail acceptance tool to verify that an external thread conforms to the specified metric ISO fine‑thread tolerance (DIN 13, 6g). Can this gauge be used for left‑hand threads? This ring gauge is configured for right‑hand threads; left‑hand thread inspection requires the corresponding left‑hand gauge. How does the DIN 13, 6g specification affect inspection? Using the DIN 13 specification with tolerance 6g ensures that the gauge applies a standard acceptance limit for metric ISO fine threads, allowing consistent quality decisions across production and inspection. Is the material suitable for heavy use in a production environment? Yes. The hardened gauge steel construction of the M50 ring gauge is selected for wear resistance and dimensional stability during repetitive shop‑floor checks. Which SKU should be ordered for this product? Order the item under SKU M315.150.4, which corresponds to the Metav IndustryLine M50 x 1 mm Go ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M50×1.5 Thread Ring Gauge Right-Hand ISO Metric Fine Thread DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Ensure precise thread acceptance in production with the combination of DIN 13 tolerance class 6g and hardened gauge steel construction; the compact M50 x 1.5 Go ring weighs 1.8 kg for straightforward handling. Order the Go ring directly via Metav Werkzeuge or consult the Metav specialists for application advice. Go ring gauge M50 x 1.5 mm (DIN 13, 6g) — Metav IndustryLine The Go ring gauge M50 x 1.5 mm is a right‑hand acceptance gauge for quick verification of ISO metric fine threads in production and quality control environments. DIN 13 tolerance class 6g for ISO fine threads Hardened gauge steel for long service life Right-hand M50 x 1.5 Go ring gauge Compact 1.8 kg weight for easy handling Fast, reliable in‑process thread acceptance The Go ring provides a rapid go/no‑go style check that reduces inspection time and keeps throughput steady on the shop floor. By offering a direct acceptance check for ISO metric fine thread forms, the gauge removes ambiguity from visual inspection and minimises downstream rework. The combination of DIN 13 conformity and a clearly defined 6g tolerance class delivers measurable process control, helping to keep first‑pass yield high and production schedules predictable. Durable construction for consistent results Built from hardened gauge steel, the ring resists wear and preserves the reference form across repeated use. The robust material choice ensures dimensional stability and repeatability, so the gauge remains a trustworthy reference even after prolonged use. At 1.8 kg, the ring strikes a balance between mass for handling stability and portability for bench or station checks. The right‑hand design matches standard thread direction, simplifying routine verification tasks. Designed to support quality workflows Integration into incoming inspection and final inspection routines is straightforward: the ring checks the essential functional fit without the need for complex measuring setups. As an acceptance gauge it complements measuring instruments used for detailed inspection by providing a fast go/no‑go verdict, reducing the number of parts requiring full metrological analysis. This instrument thus contributes to leaner inspection processes and faster decision cycles in busy production environments. Standards conformity and application clarity Manufactured to the DIN 13 standard with tolerance class 6g, this Go ring is specified for M50 x 1.5 ISO fine threads and is suitable wherever consistent thread acceptance is required. The hardened gauge steel construction contributes to longevity and traceable performance over time. For cases requiring additional documentation or calibration traceability, consult Metav Werkzeuge about available services and certificates that match organisational quality systems. Request technical advice or a quotation from Metav Werkzeuge for this Metav IndustryLine Go ring; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M315.150.6 GTIN: 4054469125121 Weight: 1.8 kg Thread size: M50 x 1.5 Tariff number: 90173000 Facts Standard: DIN 13 Tolerance class: 6g Hand: Right-hand Category: Go ring (acceptance) Special features Material: Gauge steel, hardened Type: Thread ring gauge for ISO metric fine threads Application: Quick go/no-go acceptance checks Manufacturer: Metav IndustryLine FAQ What is the primary function of this Go ring gauge? The Go ring gauge M50 x 1.5 mm (Metav IndustryLine, SKU M315.150.6) serves as a pass/fail acceptance check for ISO metric fine threads, confirming whether threaded parts meet the required functional thread form and fit. Which standard and tolerance does this gauge follow? This gauge is manufactured to DIN 13 with a tolerance class of 6g, which defines the acceptable limits for the checked ISO metric fine threads. What material is used and how does it affect performance? Made from hardened gauge steel, the ring offers wear resistance and dimensional stability, which supports repeatable acceptance checks over many cycles. Is this gauge suitable for left‑hand threads or special forms? The listed item is a right‑hand Go ring for M50 x 1.5 ISO fine threads; left‑hand versions or special thread forms require a different gauge variant. How should the gauge be used in a production environment? Use the ring for quick in‑process checks and final inspection acceptance: the part must enter the Go ring freely to be accepted. Parts that do not enter require further inspection or rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M52x1 Thread Ring Gauge, Go Limit, DIN 13 6g, Right-Handed, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of DIN 13 conformity, hardened gauge steel and stable mass for dependable thread verification; order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge M52 × 1 mm (DIN 13, 6g) – Hardened gauge steel, right‑hand (Metav IndustryLine) Thread Ring Gauge M52 × 1 mm designed to verify external metric ISO fine threads in production and inspection environments, suitable for use in workshop gauges and incoming goods control DIN 13 tolerance, class 6g Hardened gauge steel construction For metric ISO fine thread M52×1 RH Robust mass: 1.4 kg for stable handling Precision that keeps production within tolerance The thread ring gauge is manufactured to DIN 13 with a 6g tolerance class, giving a verifiable reference for metric ISO fine threads. By providing a defined acceptance condition for external threads, the gauge supports fast go/no-go checks on components and prevents off‑tolerance assemblies from entering the process. The gauge’s specification aids traceable inspection routines and simplifies quality documentation when integrated into routine sampling or final inspection steps. Durable design for repeatable handling in the workshop Constructed from hardened gauge steel, the ring offers long wear resistance under frequent use, which reduces the frequency of replacement and keeps downtime low. The item’s 1.4 kg mass contributes to stable seating when engaging a threaded test piece, limiting wobble during verification and improving repeatability. These mechanical advantages translate directly into fewer false rejects and steadier throughput on the control bench. Standards compatibility and fit for inspection workflows The gauge conforms to recognised standards for metric threads, assuring compatibility with standardised inspection procedures and drawing notes that reference DIN 13 and ISO thread forms. As a right‑hand gauge for M52×1 profiles, it integrates into sets of workshop gauges or station fixtures with minimal adaptation. Traceability is supported via the provided identifiers and dimensions, facilitating storage in tool cabinets and inclusion in calibration schedules when required. Discuss application requirements with Metav Werkzeuge in Emmerich for tailored advice or to arrange procurement through our central European distribution. Technical Data Article number: M315.252.4 GTIN: 4054469126814 Manufacturer: Metav IndustryLine Facts Thread size: M52 × 1 mm Weight: 1.4 kg Tolerance class: 6g Tariff number: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13 Thread direction: right‑hand Category: Gauges / Lehren FAQ What thread form does this gauge check? The ring gauge checks M52 × 1 mm metric ISO fine external threads in accordance with the dimensional profile specified for that size. Is the gauge suitable for repeated production checks? Yes, the hardened gauge steel and robust mass make this ring suitable for repeated checks on the control bench and in incoming goods inspection. What tolerance specification applies to the gauge? The gauge is manufactured to DIN 13 with a 6g tolerance class, providing a standardised acceptance limit for external threads. Which material is used for the gauge body? The body is made of hardened gauge steel, chosen for wear resistance and long service life under frequent use. How should the gauge be integrated into a calibration plan? Include the ring gauge in routine inspection and calibration schedules to ensure traceability; identifiers such as article number and GTIN support record keeping Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M52x1.5 Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Product data inconsistent: fields 'ausschuss' (marked as reject) and 'gut' (marked as good) are both set; this creates a conflict in the product information and prevents the generation of a reliable product description. When both fields are populated simultaneously, it becomes unclear whether the product should be categorised as acceptable or rejected, leading to ambiguity in the data. To resolve this issue, it is essential to ensure that only one of these fields is set at any given time. Proper validation and data integrity checks should be implemented to avoid such inconsistencies and ensure accurate product descriptions.
M52x1.5 Thread Ring Gauge 6g Right-Hand, Hardened Master Steel, DIN 13 - Metav IndustryLine
Take advantage of the combination of DIN 13 (6g) tolerance, hardened gauge steel construction and the stable 2.1 kg mass for reproducible thread inspection results; order the gauge directly via Metav Werkzeuge or contact the consultants for application advice. Thread gauge ring M52 x 1.5 mm (go) — DIN 13, hardened gauge steel (Metav IndustryLine) The thread gauge ring M52 x 1.5 mm (go) is a precision inspection ring for metric ISO fine threads; designed as a right‑hand "go" gauge for fast verification in workshop and production environments. *DIN 13 tolerance class 6g for ISO fine threads *Hardened gauge steel for long service life *"Go" ring for M52 x 1.5 right‑hand thread *Solid 2.1 kg mass for stable inspection handling High‑accuracy checks with clear acceptance criteria This inspection ring is manufactured to DIN 13 with tolerance class 6g, providing a defined pass criterion for metric ISO fine threads. As a dedicated "go" gauge, it confirms that a threaded part meets the lower limit of the tolerance zone: the ring should assemble smoothly onto the measured thread when the part is within tolerance. This straightforward physical check reduces interpretation and speeds up process control on the shop floor, supporting efficient in‑process sampling and final acceptance routines. The ring’s designation for M52 x 1.5 threads makes it suitable for medium‑diameter components common in mechanical assemblies. Robust material and mass for reproducible handling Built from hardened gauge steel, the ring resists wear from repeated use and maintains dimensional stability over time, which reduces the need for frequent maintenance. The instrument’s 2.1 kg mass gives tactile stability when performed manually, lessening the chance of tilt or misalignment during inspection and therefore lowering operator‑introduced variation. The hardened surface also simplifies cleaning and protects the calibrated diameters against nicks and minor impacts, lengthening the service interval and preserving measurement integrity in routine quality checks. Seamless fit into production quality workflows The ring gauge is optimised for straightforward integration into existing inspection benches and incoming goods control. Its clear role as a go acceptance tool shortens decision paths: a fit confirms conformity, enabling immediate release or onward processing. Traceable identification (GTIN and SKU) supports inventory management and documentation of inspection equipment within quality systems. For workshops seeking reliable, low‑complexity gauging tools, this ring provides an economical means to enforce thread tolerances without elaborate measuring devices. For a reliable workshop solution from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for advice on suitability for specific production tasks and order processing via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.152.6 GTIN: 4054469125169 Tariff code: 90173000 Weight: 2.1 kg Thread size: M52 x 1.5 Facts Norm / tolerance: DIN 13, 6g Type: "Go" ring gauge Handing: right‑hand thread Category: Ring gauge for metric ISO fine threads Special features Material: hardened gauge steel Durable finish for extended service life Intended use: inspection of metric ISO fine threads Category path: Lehren / Messgeräte FAQ What is the primary purpose of this gauge ring? The thread gauge ring M52 x 1.5 mm (go) by Metav IndustryLine (SKU M315.152.6) is intended for quick pass/fail verification of metric ISO fine threads to DIN 13, simplifying acceptance decisions during production and incoming inspection. How does a "go" ring operate in practice? A "go" ring is designed so that a compliant threaded part assembles into the gauge without force; the M52 x 1.5 (go) ring confirms that the part is at or above the minimum major diameter and pitch form required by the specified tolerance class. Which standards and tolerance class apply to this gauge? This instrument is manufactured to DIN 13 and specified for tolerance class 6g, making it suitable for standard metric ISO fine‑thread tolerancing as used in mechanical engineering. What maintenance keeps the gauge reliable over time? Routine cleaning, protection from sharp impacts and storage in a dry environment will preserve the hardened gauge steel surface; documentation of use and periodic visual inspection help ensure continued conformity for the M315.152.6 ring. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M52x1.5 Thread Ring Gauge Metric ISO Fine Right-Hand DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise thread verification, robust hardened construction and DIN‑compliant tolerance control for reliable production inspection — order directly via Metav Werkzeuge or consult our specialists for integration advice. Thread ring gauge M52 x 1.5 — Metric ISO fine thread, 6g (Metav IndustryLine) The Thread ring gauge M52 x 1.5 is a hardened inspection gauge designed for fast verification of right‑hand metric ISO fine threads to DIN 13 with 6g tolerance. Thread size M52 x 1.5 metric ISO fine Tolerance class 6g to DIN 13 Hardened gauge steel construction Right‑hand thread inspection tool Rapid, repeatable validation for production lines The ring gauge provides a straightforward method for thread verification, enabling rapid pass/fail checks directly at the production station or in the inspection bay. Specified for M52 x 1.5 metric ISO fine threads and matched to DIN 13 tolerance 6g, the gauge eliminates time‑consuming measurements while maintaining a consistent assessment criterion. This reduces cycle times and lowers the risk of non‑conforming parts reaching assembly, supporting lean manufacturing and improved throughput. Durable construction that keeps calibration intervals long Manufactured from hardened gauge steel, the device is built to withstand repeated use in workshop and production environments. The material choice provides excellent wear resistance and dimensional stability, which translates into longer service life and fewer replacements. Because the gauge is a tactile, mechanical verification tool, maintenance is straightforward and the robustness of the construction minimises deviations that otherwise require frequent recalibration or replacement. Standards compliance and easy identification in quality systems Conformity with DIN 13 and a clearly stated 6g tolerance class simplifies documentation and traceability within quality management systems. The gauge is identified by SKU M315.252.6 and GTIN 4054469126821 for stock control and ERP integration, making it easy to record inspection results and link them to production batches. For workshops and quality teams requiring fast, unambiguous decisions, this threaded inspection solution provides a practical balance between accuracy and operational simplicity. For reliable thread inspection in production, specify the Metav IndustryLine thread ring gauge M52 x 1.5 and contact Metav Werkzeuge in Emmerich for purchasing or technical matching at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.252.6 GTIN: 4054469126821 eClass: 21170214 Tariff number: 90173000 Facts Thread size: M52 x 1.5 Tolerance class: 6g Standard: DIN 13 Thread direction: right‑hand Special features Material: hardened gauge steel Application: inspection of metric ISO fine threads Manufacturer: Metav IndustryLine SKU: M315.252.6 FAQ What thread sizes does this gauge check? The ring gauge checks the M52 x 1.5 metric ISO fine thread as specified for the item and is intended for right‑hand threads. What does the 6g tolerance indicate? The 6g classification refers to the tolerance class for external threads according to DIN 13, indicating the permissible dimensional limits used for production and inspection. Is the gauge suitable for use on the shop floor? Yes, the hardened construction makes the gauge appropriate for routine shop‑floor verification and quick pass/fail assessments during production. How is the gauge identified for inventory and traceability? Identification is provided via SKU M315.252.6 and GTIN 4054469126821 to support ERP systems and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M52x2 Limit Thread Plug Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
The supplied product dataset contains mutually contradictory quality information for the item with SKU M315.052.7: the record simultaneously indicates both a scrap condition and an acceptable (good) condition. Because of this inconsistency, a technically correct and trustworthy product description cannot be produced. Please review and correct the source data to clarify the actual quality status—only then can a full specification, application guidance and compliant sales text be generated for the limit thread plug gauge (M52 × 2, metric ISO fine thread, right‑hand, hardened gauge steel, DIN 13 tolerance 6H). If assistance is required to resolve the discrepancy or to provide additional verified details, Metav’s product specialists are available by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930; they can coordinate a corrected data submission so the accurate product documentation can be created promptly.
M52x2 Thread Gauge Ring For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
Take advantage of a purpose‑built thread ring gauge for reliable inspection of M52 × 2 mm metric ISO fine threads, manufactured from hardened gauge steel and specified to DIN 13 (6g) for consistent interchangeability; order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M52 × 2 mm — hardened gauge steel, DIN 13 (Metav IndustryLine) A precision thread ring gauge M52 × 2 mm designed for repeatable checks of metric ISO fine threads in production, incoming inspection and assembly controls. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M52 × 2 mm metric ISO fine thread Right‑hand thread for standard applications Reliable conformity for metric fine threads A dedicated gauging solution ensures fast, objective decisions during quality control. The DIN 13 reference and 6g tolerance class mean the gauge is matched to the standard medium tolerance used for external metric threads, facilitating interchangeability with standard internal threads. By using a calibrated ring of this specification, inspection routines become repeatable and deviations are identified early, reducing rework and scrap while supporting traceable production records. Built to resist wear and aid handling Manufactured from hardened gauge steel, the tool resists profile wear and maintains dimensional stability under frequent use. At roughly 1.4 kg, the mass gives the ring a stable feel for manual assessment and reduces wobble during seating, which supports quicker and more reliable checks on the shop floor. The robust material choice translates into longer service life and predictable inspection intervals, lowering lifecycle costs for quality equipment. Integrates with workshop workflows and procurement The ring gauge fits directly into standard inspection workflows and is supplied with clear identification for procurement and traceability. Compatibility with metric ISO fine thread practices streamlines acceptance testing for incoming components and in‑process controls. For buyers and quality engineers the combination of a recognised standard, durable construction and clear product identification simplifies specification management and spares planning. For procurement or technical advice on using this Metav IndustryLine thread ring gauge in production inspection, contact Metav Werkzeuge for personalised guidance and ordering assistance. Technical data Article number: M315.252.7 GTIN: 4054469126838 Tariff number: 90173000 Norm: DIN 13, 6g Material: hardened gauge steel Weight: 1.4 kg Thread: M52×2 Brand: Metav IndustryLine Facts Thread size: M52 × 2 mm Tolerance class: 6g Weight: 1.4 kg GTIN: 4054469126838 Tariff number: 90173000 Special features Right‑hand metric ISO fine thread Complies with DIN 13 Hardened gauge steel for wear resistance Category: gauges (Lehren) FAQ What thread size does this gauge check? The thread ring gauge checks M52 × 2 mm metric ISO fine threads; the Metav IndustryLine ring (SKU M315.252.7) is made for right‑hand threads. Which tolerance or class does the gauge represent? This ring is specified to 6g in accordance with DIN 13, making it suitable for standard external thread inspections and ensuring interchangeability with corresponding internal threads. What is the gauge made from and how durable is it? The Metav IndustryLine thread ring gauge is produced from hardened gauge steel, chosen for dimensional stability and long wear resistance under frequent inspection cycles. Can this gauge be used for incoming inspection in serial production? Yes, the gauge is intended for production and incoming inspection of metric ISO fine threads and integrates into routine quality checks for fast pass/fail verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M52x2 Thread Ring Gauge, Go, DIN 13 6g, Right-Hand, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a precise Go ring gauge built to DIN 13, 6g tolerances and made from hardened gauge steel for repeatable thread acceptance in production environments. Order the Thread ring gauge M52 x 2 mm (GO) directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M52 x 2 mm (GO) — Go gauge for metric ISO fine threads, right-hand The Thread ring gauge M52 x 2 mm (GO) is a hardened, go-only gauge for quick pass/no‑pass checks of right‑hand metric ISO fine threads in series production and incoming inspection. DIN 13 tolerance class 6g Hardened gauge steel construction Right‑hand metric ISO fine thread Reliable acceptance testing for fine threads A dedicated Go ring gauge simplifies routine thread checks: one positive fit confirms conformity to the specified tolerance band, reducing inspection time and operator steps compared with full measuring processes. Built to DIN 13, 6g, the gauge provides a clear, standards‑based decision criterion for acceptance sampling in the workshop or production line. The M52 x 2 mm designation denotes the nominal thread size and pitch, ensuring compatibility with components specified to metric ISO fine thread geometry. Durable construction for repetitive use Manufactured from hardened gauge steel, the device resists wear during repeated engagement and maintains dimensional stability over long inspection cycles. This material choice lowers the need for frequent replacements and supports consistent quality control. The right‑hand orientation and fine‑pitch profile are produced to standard thread geometry, which helps to avoid false failures due to incorrect profile or alignment during checks. Where traceability matters, the robust construction also supports periodic calibration intervals typical for shop‑floor gauges. Practical use in production and quality control Designed as a go/no‑go aid rather than a measurement instrument, this ring gauge speeds up acceptance testing for threaded parts, assembly checks and first‑article inspection. Integration into routine control plans reduces throughput bottlenecks and clarifies pass criteria for assembly personnel and inspectors. For batch sampling, the gauge complements dimensional inspection tools by providing a fast binary decision, helping to cut down non‑productive handling and to maintain flow on the shop floor. For reliable, standards‑based thread acceptance choose the Metav IndustryLine Go ring gauge M52 x 2 mm and contact Metav Werkzeuge in Emmerich for technical advice by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical Data Article number: M315.152.7 GTIN: 4054469125176 Eclass: 21170214 Tariff number: 90173000 Facts Thread: M52 x 2 mm Tolerance: DIN 13, 6g Orientation: right-hand Special features Material: hardened gauge steel Type: Go ring gauge (acceptance) Application: metric ISO fine threads Category: Lehren / gauges FAQ What does the designation M52 x 2 mm mean? The M52 x 2 mm label denotes a nominal metric thread with a 52 mm major diameter and a 2 mm pitch, suitable for standard metric ISO fine thread specifications used in the corresponding parts. Is this a Go or Go/No‑Go gauge? This product is a Go ring gauge designed to verify that external threads fit within the lower tolerance limit; it confirms acceptance but does not provide a no‑go check. Which standard does the gauge comply with? The ring gauge is manufactured to DIN 13 with a 6g tolerance class, matching common metric ISO fine thread tolerance requirements for production acceptance. Can the gauge be used for inspection in the workshop? Yes, the robust, hardened design makes the gauge suitable for routine workshop and production‑line checks where fast, repeatable acceptance testing is required. What is the SKU for ordering and traceability? The SKU for this item is M315.152.7 and the product is listed under Metav IndustryLine for procurement and traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M52x3 Limit Thread Plug Gauge Right Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of fast go/no‑go checks, hardened gauge steel construction and conformity to DIN 13, 6H for reliable thread control and fewer rejects; order the limit gauge directly via Metav Werkzeuge or consult our specialists for installation and process integration. Limit thread plug gauge M52 x 3 mm — right‑hand metric ISO fine‑thread limit gauge (Metav IndustryLine) Limit thread plug gauge M52 x 3 mm provides rapid, repeatable verification of metric ISO fine threads in production and incoming inspection, designed as a go/no‑go control for right‑hand threads. Right‑hand metric fine thread M52 x 3 Go/no‑go limit gauge for quick checks Hardened gauge steel for long service life Manufactured to DIN 13, 6H tolerance Faster pass/fail inspection for higher throughput The go/no‑go configuration turns multiple measurement steps into a single quick check, reducing inspection time and keeping production moving. By relying on a purpose‑made limit gauge rather than lengthy measuring routines, the workshop secures repeatability of checks and lowers operator‑induced variation. The compact verification process supports tighter process control, helping to avoid rework and to keep throughput predictable in serial production. Conformity and interchangeability you can document Compliance with DIN 13, 6H means the gauge matches the common tolerance system for metric internal threads and can be used confidently within standardised quality workflows. The M52 x 3 designation identifies the fine‑pitch metric thread, while the 6H internal tolerance ensures the gauge represents the accepted production fit. This standard‑based approach simplifies acceptance criteria between supplier and customer and makes audit trails clearer when technical decisions must be justified. Robust construction for stable measurements over time Made from hardened gauge steel, the tool resists wear from repeated use on the shop floor and keeps boundary dimensions stable for longer intervals between regrind or replacement. The substantial physical build (approx. 1.3 kg) gives tactile reassurance during handling and contributes to consistent seating in the thread under test. Together, material choice and mechanical design translate into lower life‑cycle costs and fewer measurement‑related interruptions to production. Practical application and workshop integration As a purpose‑built limit plug, this right‑hand gauge is optimised for routine quality control of metric ISO fine threads in components and assemblies. Used at incoming inspection or at final assembly stations, the gauge speeds decision making: parts that pass the go check are cleared, while failed parts are immediately segregated for corrective action. For complex assembly chains, the simplicity of a go/no‑go check reduces training needs and shortens downstream reaction times. For reliable thread verification and fast integration into existing inspection routines, contact Metav Werkzeuge to specify the M52 x 3 limit plug gauge (SKU M315.052.8) and arrange delivery from Emmerich; technical advice is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.052.8 GTIN: 4054469123516 Brand: Metav IndustryLine Core specifications Thread: M52 x 3 mm Thread hand: Right‑hand Standard: DIN 13, 6H Weight: 1.3 kg Tariff number: 90173000 Materials & features Material: Gauge steel, hardened Type: Limit (go/no‑go) thread plug gauge Application: Metric ISO fine threads Eclass: 21170235 FAQ What is the primary use of this limit plug gauge? The limit thread plug gauge M52 x 3 mm is intended for quick go/no‑go verification of metric ISO fine internal threads, enabling fast pass/fail decisions during incoming inspection and production checks. Which standard does the gauge comply with and what does it mean? Manufactured to DIN 13, 6H, the gauge corresponds to established metric internal thread tolerances; a 6H fit indicates the nominal internal‑thread tolerance band used for standard assembly conditions. What material is the gauge made from and how does that affect durability? The M52 x 3 gauge is produced from hardened gauge steel, which increases wear resistance and maintains boundary dimensions longer under frequent use, reducing the need for early replacement. Is this gauge suitable for on‑line inspection in an assembly line? Yes, the go/no‑go design of the limit plug gauge M52 x 3 mm is especially suited to inline checks where rapid, unequivocal verification is required to maintain assembly flow. Can the gauge be used for non‑ISO or custom threads? This plug gauge is designed specifically for metric ISO fine threads; for non‑standard or custom thread forms, a dedicated gauge engineered to the required profile is recommended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M52x3 Thread Go Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 conformity, hardened gauge steel and clear go/no‑go functionality to secure fast, repeatable thread control in production. Order the gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Thread ring gauge M52 x 3 mm (No‑go) — DIN 13, 6g, Metav IndustryLine The Thread ring gauge M52 x 3 mm (No‑go) is a hardened inspection ring for pass/fail verification of metric ISO fine threads in production and incoming inspection. Hardened gauge steel for long service life DIN 13 tolerance class 6g compliance Right‑hand metric ISO fine thread M52 × 3 Rapid pass/fail control for high-throughput environments The no‑go gauge serves as a concise, rational inspection tool for operators and quality technicians who need immediate decisions on threaded parts. Used as the reject counterpart in a go/no‑go pair, the ring enables instant detection of oversize or out‑tolerance threads without complex measurement routines. This approach reduces inspection time, minimises machine downtime and supports a stable production flow by preventing nonconforming parts from entering assembly or shipment. Ensures interchangeability through standard conformity Conformity with DIN 13 and the 6g tolerance class ensures that threads checked with this ring gauge meet established dimensional and form requirements for metric ISO fine threads. The standardised tolerance basis promotes interchangeability across suppliers and assemblies, lowering the risk of assembly failures. Where traceable standards are required, the use of standardised gauges offers a clear, defensible verification method during incoming inspection and process control. Robust construction for reliable use in workshop conditions Manufactured from hardened gauge steel, the ring withstands frequent handling and contact stresses typical of workshop inspection routines. The material choice and heat treatment deliver consistent wear resistance, extending useful life and preserving the nominal limit dimensions that define the no‑go condition. As a result, inspection reliability is maintained over many cycles, and the need for premature replacement is reduced—supporting economical operation. Practical integration into quality processes The component’s designation as a no‑go ring for M52 × 3 right‑hand threads makes it straightforward to place into established quality workflows such as first‑article inspection, batch sampling or final goods verification. When combined with a matching go gauge, the pair provides a complete binary verification strategy that favours speed and operator clarity. For complex or high‑value parts, this methodology complements more detailed metrological checks and aids in maintaining consistent production standards. For dependable thread control choose the Metav IndustryLine M52 no‑go ring gauge — contact Metav Werkzeuge in Emmerich for tailored advice and prompt delivery from our European quality hub Technical data Article number: M315.252.8 GTIN: 4054469126845 Manufacturer: Metav IndustryLine Facts Thread size: M52 × 3 Tolerance class: 6g Standard: DIN 13 Weight: 1.4 kg Tariff code: 90173000 Special features Material: hardened gauge steel Function: no‑go (reject) ring gauge for metric ISO fine thread Thread direction: right‑hand Category: gauges / inspection rings FAQ What is the purpose of a no‑go ring gauge? A no‑go ring gauge is used to detect threads that exceed the upper tolerance; the Thread ring gauge M52 x 3 mm (No‑go) indicates whether a threaded part must be rejected. Which thread standard does this gauge check? This inspection ring verifies conformity to DIN 13 for metric ISO fine threads, tolerance class 6g. Can this gauge be used on both left‑ and right‑hand threads? The supplied ring is for right‑hand threads only; a separate gauge is required for left‑hand threads. How does hardened gauge steel benefit inspection routines? Hardened gauge steel offers wear resistance so the limit dimensions of the no‑go condition remain stable during repeated use, preserving the reliability of the Metav IndustryLine inspection tool. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M52x3 Thread Go Ring Gauge Metric ISO Fine Right-Handed Hardened Gauge, DIN 13 6g - Metav IndustryLine
Take advantage of a standards-compliant, wear‑resistant solution for fast Go/no‑Go checks: robust hardened gauge steel, DIN 13 (6g) tolerance and a substantial build that supports repeatable inspection cycles. Order directly via Metav Werkzeuge or consult the team for specification advice. Thread Ring Gauge M52×3 (Go) — hardened gauge steel, DIN 13 (6g) (Metav IndustryLine) A Thread Ring Gauge M52×3 (Go) designed for rapid verification of metric ISO fine threads in production and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For metric ISO fine threads M52×3 Reliable pass/fail control for threaded parts A Go ring gauge provides an immediate, objective check whether an external thread matches the required form and pitch. Built to the DIN 13 specification with 6g tolerance, the gauge offers a clear accept criterion: parts that fully engage the Go ring are within nominal limits. This straightforward test reduces decision time on the shop floor and supports quality control routines that favour throughput and reproducibility without complex measurement rigs. Durable construction for repetitive inspection cycles Manufactured from hardened gauge steel, the tool resists wear that would otherwise shift acceptance limits over time. The substantial mass (approx. 2.1 kg) and solid material choice contribute to dimensional stability and long service life, reducing the frequency of replacement and the associated downtime. For routine quality assurance, this durability translates into predictable inspections and fewer unplanned re-measurements. Designed for metric ISO fine threads and right‑hand components Specified for M52×3 threads, the gauge is tailored to metric ISO fine‑pitch applications commonly found in precision engineering and assemblies where fit and interchangeability are essential. The right‑hand orientation aligns with standard production threads. Conformance to the international metric standard ensures compatibility with mating parts produced across different suppliers and machine shops. Practical integration into production and inspection workflows The ring gauge is intended as a binary inspection tool within a broader quality system: use it at the end of a production step, at final inspection, or at goods receipt to rapidly segregate acceptable parts from non‑conforming ones. Its straightforward operation reduces operator training needs while supporting traceable sampling plans. As part of a pragmatic inspection strategy, the gauge helps lower scrap rates and improves overall process capability by catching thread deviations early. Choose a Metav IndustryLine gauge for consistent thread verification and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data SKU: M315.152.8 GTIN: 4054469125183 Weight: 2.1 kg Dimensions & Standards Thread size: M52×3 mm Tolerance class: DIN 13, 6g Direction: right‑hand Materials & Features Material: hardened gauge steel Type: Go (ring) gauge Tariff number: 90173000 Brand: Metav IndustryLine FAQ What is the primary function of this gauge? The Thread Ring Gauge M52×3 (Go) verifies whether external threads meet the acceptance limits of the specified metric ISO fine thread, providing a fast Go/no‑Go decision for production and inspection. How is the ring gauge used in everyday inspection? The mating threaded part is screwed into the Go ring; full engagement indicates conformance to the defined limits, while inability to engage or heavy binding signals non‑conformity and triggers further inspection. What tolerance and standard does the gauge check? The tool checks to DIN 13 with tolerance class 6g, the common acceptance band for metric ISO fine threads used in many mechanical assemblies. What material and build quality can be expected? Constructed from hardened gauge steel, the gauge is designed for repeated handling and offers long‑term dimensional stability suited to regular shop‑floor use. Is this gauge suitable for production and incoming inspection? Yes, its specification for M52×3 fine threads and robust construction make it appropriate for both production checks and incoming goods inspection where quick, repeatable decisions are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com