Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
10.43mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust special‑steel construction for reliable end‑measurements in workshop and inspection tasks. Order the M323.A43 directly via Metav Werkzeuge or consult the team for application advice. M323.A43 Gauge Pin — 10.43 mm Ø, 50 mm Length (Metav IndustryLine) A M323.A43 gauge pin designed as a single precision reference for end‑measurements, fixture setting and dimensional checks in workshop and inspection environments. Precision tolerance ±0.002 mm Special steel construction 50 mm length for stable support Consistent measurement performance for production checks The compact cylindrical reference, manufactured from special steel, delivers high repeatability in a small footprint. With a nominal diameter of 10.43 mm and a stated tolerance of ±0.002 mm, the pin provides a reliable datum for quick go/no‑go checks and setup verification. The tight tolerance reduces measurement scatter during repetitive tasks, which supports process stability and lowers rework rates on machined components. Robust design that eases handling and fixturing At 50 mm overall length the component balances accessibility with rigidity, making it straightforward to position in jigs and fixtures without excessive bending. The workshop‑oriented execution offers a durable surface finish that resists light knocks and handling in daily use. As a single gauge element, it functions well as a reference for end‑face measurements and for establishing clear limits during manual inspection routines, improving throughput in small‑batch production. Traceable accuracy and practical integration into inspection workflows Marked by its industrial tolerance, this gauge pin integrates into inspection protocols where precise end measures are required. The tolerance figure ±0.002 mm is immediately usable for uncertainty budgets and process capability assessments. For layout or verification tasks it serves as a compact reference, allowing teams to standardise checks across workstations and to document conformity with internal quality procedures. Contact Metav Werkzeuge today for delivery from Emmerich and for tailored advice on integrating the M323.A43 gauge pin into existing inspection routines Technical data Article number: M323.A43 GTIN: 4061905066535 Material: Special steel Weight: 0.1 kg Accuracy: ±0.002 mm Diameter: 10.43 mm Length: 50 mm Core specifications Diameter: 10.43 mm Length: 50 mm Tolerance: ±0.002 mm Mass: 0.1 kg Features Workshop version Single gauge pin Suitable as reference for end measurements Robust finish for handling and fixturing FAQ What measurement tolerance can be expected from this gauge pin? The M323.A43 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for precise end‑measurements and reference checks. Is the M323.A43 suitable for fixture set‑up and jigs? Yes. The 50 mm length and workshop‑grade construction allow stable placement in fixtures and jig assemblies for consistent reference positioning. What material is used for the gauge pin and what does that imply? The pin is manufactured from special steel; this provides durability and a wear‑resistant surface suitable for regular handling in inspection and workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.44mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise end‑dimension checks and a wear‑resistant design to secure repeatable inspection results. With a 10.44 mm diameter and a 50 mm usable length combined with an industrial accuracy of ±0.002 mm, this workshop‑grade gauge pin supports reliable alignment and go/no‑go verifications—order directly via Metav Werkzeuge or consult the product advisers for application guidance. Gauge Pin M323.A44 – 10.44 mm diameter, 50 mm length (Workshop configuration) A Gauge Pin M323.A44 designed for precise end‑measurement, alignment and fixture verification in workshop and inspection environments Workshop configuration for robust daily use Diameter 10.44 mm for end‑dimension checks High accuracy ±0.002 mm Made from special steel for wear resistance Repeatable end‑dimension checks that reduce rework The primary role of a gauge pin in quality control is to deliver reproducible reference dimensions for assemblies and inspection fixtures. With a nominal 10.44 mm diameter and an indicated accuracy of ±0.002 mm, this pin supports tight tolerance verification without the need for complex setup. The small form factor concentrates stiffness where it matters, helping to preserve repeatability when used for plug checks, dowel alignments or end‑dimension comparisons. By providing a fixed, traceable datum, the component reduces inspection variance and contributes directly to process efficiency and lower scrap rates. Durable workshop design for continuous use Built as a workshop configuration, the pin is manufactured from special steel chosen for wear resistance under frequent insertion cycles. The 50 mm length provides sufficient engagement for many common jigs and fixtures while remaining compact enough for handheld or bench operations. The balanced geometry limits eccentric loading and minimises deformation during routine use, so the pin keeps its form in daily production environments. The construction supports longer service life and predictable maintenance intervals, which benefits shops aiming for steady uptime and lower total cost of ownership. Quick integration into fixtures and inspection routines The straightforward cylindrical form enables simple incorporation into existing test rigs, pin plates and alignment tools. Where rapid throughput is required, this gauge pin serves as a reliable stop, reference or alignment element that speeds up component seating and verification steps. Its nominal size and industrial accuracy make it suitable for assembly control, pass/fail checking and use as a master reference in dimensional checks. The efficient fitment properties translate into fewer handling steps and measurable time savings on repetitive inspection tasks. Engineered precision for traceable quality decisions For inspection processes that demand consistent, objective results, the combination of nominal diameter and tight tolerance offers a clear factual basis for go/no‑go decisions. The designation M323.A44 identifies this item within inventory and inspection documentation, facilitating traceability across the workflow. When documentation and repeatability are priorities, a compact, high‑accuracy pin provides a practical substitute for more elaborate gauging setups, enabling swift, documented measurements that feed directly into quality records. Contact Metav Werkzeuge to discuss how the M323.A44 workshop gauge pin fits into existing inspection chains or to request supply and delivery options from our Emmerich location Technical Data Article number: M323.A44 GTIN: 4061905066542 Brand: Metav IndustryLine Category: Gauge pins Facts Diameter: 10.44 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg eClass: 21170231 Special features Material: Special steel Version: Workshop execution Application: End‑dimension checks, alignment, fixture referencing FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.A44 is specified with an accuracy of ±0.002 mm, making it suitable for tight workshop and inspection tolerances. Can this pin be used for alignment in assembly jigs? Yes, the workshop configuration and the 10.44 mm nominal diameter make the pin appropriate for alignment tasks and fixture referencing in production environments. Which material is used and what does it mean for wear? Manufactured from special steel, the pin offers improved resistance to wear during frequent insertion cycles, extending service life under typical workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.45mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Reliable, workshop‑grade gauging for consistent end‑measure checks: the combination of a 10.45 mm nominal diameter, 50 mm length and a ±0.002 mm tolerance makes this probe pin a practical choice for routine inspection tasks and fixture verification; order the gauging pin directly via Metav Werkzeuge or consult our specialists for matching and delivery options. Gauging pin M323.A45 — 10.45 mm Ø, 50 mm length (Metav IndustryLine) A gauging pin in workshop execution for precise end‑measure verification and routine fixture checks across production and inspection benches. Workshop version for routine use Diameter 10.45 mm for end‑measure checks High repeatability with ±0.002 mm tolerance Robust special steel construction Precision for end‑measure verification The 10.45 mm nominal diameter and a tight ±0.002 mm tolerance deliver reliable dimensional references for end‑measure tasks. This degree of accuracy supports reproducible inspection results and reduces measurement scatter when checking bores, pins and mating components. The specification translates directly into fewer false rejects and quicker go/no‑go decisions on the shop floor, promoting efficient quality control routines. Built for workshop conditions and serviceability Constructed from special steel and offered in a workshop version, the probe pin combines surface hardness with resistance to routine wear. The 50 mm length gives a stable support for end‑measure checking without unnecessary overhang, while the modest mass contributes to easy handling during repetitive operations. These attributes extend service life and reduce downtime for replacements, helping maintain steady throughput in general mechanical and metalworking environments. Streamlined integration into inspection workflows Designed as a practical reference element, this probe pin simplifies fixture alignment and dimensional spot checks within established metrology procedures. The compact form factor and clear dimensional specification enable rapid verification steps during set‑ups and in‑process checks, increasing throughput and cutting rework. Clear identification and traceability support stock management and make the component straightforward to specify for maintenance or inspection replenishment. For workshop‑grade repeatability and dependable reference checks, request technical matching or a supply proposal from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance. Technical data Article number / SKU: M323.A45 GTIN: 4061905062346 Description: Gauging pin, single, 10.45 mm Ø, 50 mm length Material: Special steel Version: Workshop execution Facts Diameter: 10.45 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Suited for end‑measure verification Single unit delivery Workshop execution for routine use Category: Gauging pins (Messstifte) FAQ What tolerance does this gauging pin offer? The gauging pin M323.A45 (Metav IndustryLine) is specified with a tolerance of ±0.002 mm, suitable for precise end‑measure checks and repeatable inspection tasks. Is the pin suitable for general fixture alignment? Yes. The workshop execution and 50 mm length make this gauging pin well suited to fixture alignment and quick positional checks on assembly and inspection jigs. What material is used for the probe pin? The item is made from special steel, chosen to balance surface hardness and wear resistance for workshop conditions. Is a calibration certificate supplied with the product? The product data does not state a calibration certificate as standard; please contact Metav Werkzeuge for calibration options if a formal certificate is required. How should the gauging pin be stored and maintained? Store in a dry, clean environment and protect the tip from knocks; periodic visual inspection and gentle cleaning will preserve accuracy and service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.46mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of precise 10.46 mm diameter control, workshop-grade special steel, and a compact 50 mm length for reliable end‑measure inspections and fast in‑process checks. Order the inspection pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A46 — 10.46 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.A46 is a single inspection pin designed for precise end‑measure and plug checks in workshop and small‑batch quality control environments Precision 10.46 mm diameter Special steel for workshop use Compact 50 mm overall length Workshop‑grade design for routine inspection High‑precision control for end‑measure tasks The inspection pin offers a diameter of 10.46 mm with a verified dimensional variation of ±0.002 mm, a tolerance that supports very fine acceptance criteria in metrology tasks. This level of repeatability helps maintain consistent go/no‑go assessments during incoming inspection and during process checks, reducing the risk of downstream rework. The stated variation corresponds to micrometre‑scale control, making the pin suitable where small deviations matter for assembly fit and functional clearance. Robust, workshop‑ready construction for everyday use Manufactured from special steel, the probe is built as a workshop‑grade tool intended for frequent handling and rapid checking routines. The 50 mm overall length and compact mass make it easy to position in bores and on datum faces without excessive overhang, so measurements remain stable during short inspection cycles. The simple single‑piece design prioritises durability and ease of cleaning, promoting long service life under typical workshop conditions. Traceable identification and practical inspection benefits The item is supplied as an individual inspection pin (SKU M323.A46) and features clear identification for traceability within quality records and tooling lists. Its compact format streamlines routine end‑measure checks, increasing inspection throughput and helping to avoid assembly defects. Integration into bench top gauges or ad‑hoc inspection jigs is straightforward, enabling faster decision making in production and quality assurance workflows. For workshop‑ready precision choose Metav IndustryLine and contact Metav Werkzeuge in Emmerich for product availability and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.A46 GTIN: 4061905062353 Manufacturer: Metav IndustryLine Facts Diameter: 10.46 mm Length: 50 mm Weight: 0.1 kg Accuracy / variation: ±0.002 mm Special features Material: Special steel Single item delivery Workshop execution for routine use Application: End‑measure / plug checks FAQ Is this inspection pin suitable for precision bore checks? Yes. The M323.A46 inspection pin is intended for end‑measure and plug checks, offering a 10.46 mm diameter with a variation of ±0.002 mm suitable for fine bore verification. What material is the gauge pin made from? The pin is made from special steel and supplied in a workshop‑grade execution to withstand regular handling and inspection tasks. How compact is the pin and what handling advantages does this bring? With a 50 mm overall length and low mass, the pin is compact for easy positioning in bores and on datum faces, which supports stable measurements during rapid inspection cycles. What level of dimensional repeatability does the product offer? Dimensional variation is specified as ±0.002 mm, enabling micrometre‑level repeatability suitable for stringent quality checks. How is the item identified for traceability? The product is supplied as a single inspection pin with SKU M323.A46 and GTIN 4061905062353 for straightforward traceability in inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.47mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precision, compact form factor and robust workshop execution to streamline routine inspection tasks; the 10.47 mm diameter and ±0.002 mm tolerance make this a reliable go‑to for quick end‑measure checks. Order directly via Metav Werkzeuge or consult our specialists for technical clarifications. Gauge pin M323.A47 — 10.47 mm dia, 50 mm length (Metav IndustryLine) A gauge pin designed for end‑measurement and quick go/no‑go checks in workshop environments, offering a compact 50 mm length for confined spaces Workshop‑grade construction for daily use Diameter 10.47 mm for precision fits Length 50 mm suited to compact checks Dimensional accuracy ±0.002 mm Precision where it counts The compact design provides a consistent datum for checking bore sizes and end measurements. Manufactured from special steel, the pin delivers dimensional stability and wear resistance that preserve fit over many cycles. The tight ±0.002 mm tolerance means fewer false rejects during routine inspection, improving throughput and reducing rework. For operators who value repeatability, this tool converts a simple tactile check into a verifiable step in the quality chain. Engineered for workshop environments This workshop variant is built to withstand daily handling and quick services at the bench. The short 50 mm length and modest mass contribute to easy manual handling and rapid placement into bores or gauges, while the choice of special steel keeps surface finish and roundness stable under mechanical contact. The robust construction minimises the need for frequent replacements and supports a predictable inspection rhythm on the shop floor. Practical application and handling guidance Use the pin for end‑measure validation, bore checking and as a reference gauge during assembly or testing. Its 10.47 mm diameter offers a snug fit for components specified around that nominal size and can be used as a fast check in incoming inspection or set‑up routines. Clean and lightly oil the pin before storage to avoid corrosion; when in use, verify seating and visual alignment rather than relying solely on tactile feel to ensure correct engagement. Why this tool benefits production A compact gauge pin reduces cycle time for routine verification steps and integrates smoothly into established inspection sequences. By providing a reliable mechanical reference with industrial tolerance, it reduces downtime caused by uncertainty and supports better decision making on the line. The workshop specification ensures that the component balances durability with cost‑effective sourcing for high‑volume environments. Discuss application needs with Metav Werkzeuge to ensure fit for purpose and to arrange supply from stock at the Emmerich site Technical data Article number: M323.A47 GTIN: 4061905062360 Material: Special steel Length: 50 mm Diameter: 10.47 mm Accuracy: ±0.002 mm Weight: 0.1 kg Facts Category: Gauge pin Variant: Single pin, workshop execution Intended use: End measurement, bore checking Packaging: Single item Special features Robust workshop construction Tight tolerance for reliable checks Compact length for confined spaces Suitable for repeated routine use FAQ What is the nominal diameter and length of this gauge pin? The gauge pin is specified at 10.47 mm diameter with a 50 mm length; it is supplied as the single‑pin version M323.A47 from Metav IndustryLine. How accurate is the M323.A47 gauge pin? The pin is manufactured to a dimensional accuracy of ±0.002 mm, giving dependable results for rapid end‑measurement and fit checks. Which material is used and how should the pin be maintained? The pin is made from special steel; recommended care is cleaning after use and light oiling for storage to protect the surface and maintain roundness. Can this pin be used for production spot checks on assembly lines? Yes — the workshop‑grade construction and compact format make the gauge pin suitable for fast spot checks during set‑up and incoming inspection in production environments. Is this item supplied individually or as part of a set? This article is supplied as a single gauge pin under SKU M323.A47, sold individually for selective replacement or targeted inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.48mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine the compact 50 mm length with ±0.002 mm accuracy and robust special steel for reliable end‑measurements; order the gauge pin directly via Metav Werkzeuge or contact our consultants for tailored advice. Gauge pin, single, Ø 10.48 mm, length 50 mm — Metav IndustryLine The Gauge pin, single, Ø 10.48 mm, length 50 mm is a compact, workshop‑grade measuring pin designed for precise end‑measurements and fitting checks in industrial metrology. Workshop version for robust use Diameter 10.48 mm for precision checks Tolerance ±0.002 mm for high accuracy Supplied in a protective transport case Precision where it matters This gauge pin is manufactured for fine end‑measurement tasks and delivers a repeatable tolerance of ±0.002 mm, which reduces uncertainty in fit‑control and inspection routines. With a nominal diameter of 10.48 mm and a compact 50 mm length, the component sits in the micro range of measuring tools and is therefore suited to applications where small deviations affect assembly or functional clearance. The stated accuracy helps to ensure that measurements translate directly into reproducible production decisions rather than approximate estimates. Robust, workshop‑ready design Engineered as a workshop version, the pin is produced from special steel, offering strength and wear resistance under frequent handling. The robust material and compact geometry make the item durable during repetitive insertion and removal cycles in gauges or fixtures. Delivery in a transport case protects the gauge pin during storage and transit, maintaining dimensional integrity until the moment of use and simplifying logistics between bench and inspection station. Practical uses in quality control and assembly The measuring pin is intended for end‑measurements, fitting checks and verifying bore alignments in both small assemblies and precision components. Typical uses include gauge verifications, plug checks and quick go/no‑go confirmation within incoming inspection or final assembly workflows. The straightforward geometry makes interpretation of results simple: matching the pin to a mating bore confirms conformity or signals the need for rework with minimal secondary interpretation. Handling, maintenance and storage Lightweight and easy to handle at 0.1 kg, the pin can be used single‑handed in repetitive sequences without operator fatigue. Routine upkeep is limited to gentle cleaning and protective storage in the supplied case; avoiding abrasive contact preserves the specified tolerance. For long‑term accuracy, periodic inspection against master gauges is recommended to detect wear before it affects measurement outcomes. Metav IndustryLine backing and practical benefits As part of the Metav IndustryLine range, this tool benefits from the supplier’s long experience in making precision accessible to workshops and industry alike. The compact format, exact tolerance and workshop focus combine to deliver a dependable tool for everyday metrology tasks, reducing measurement uncertainty and supporting consistent production quality. Contact Metav Werkzeuge for availability and delivery information regarding the Metav IndustryLine gauge pin — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.A48 GTIN: 4061905062889 Brand: Metav IndustryLine Facts Diameter: 10.48 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Special steel Supplied in transport case Designed for end measurements FAQ Is this pin calibrated on delivery? The supplied gauge pin is delivered as a measuring part; calibration status is indicated on the product label and will be documented if provided with the item. Can the pin be used for fitting checks in production fixtures? Yes, the Metav IndustryLine gauge pin is suitable for fitting checks and quick bore verifications in production fixtures and assembly stations. What maintenance is required to preserve accuracy? Regular cleaning, careful storage in the transport case and periodic comparison with master gauges will preserve the pin's ±0.002 mm accuracy. Is the material suitable for heavy‑use environments? The pin is made from special steel, chosen for wear resistance in workshop conditions; however, routine inspection is advised to detect wear from intensive use. Which measurement tasks is the pin best suited to? Designed for end‑measurements and fitting checks, the pin is ideal for small‑format precision tasks, inspection benches and quick conformity assessments for components with tight clearances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.49mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
The combination of high repeatability, Ø 10.49 mm nominal diameter and a narrow tolerance of ±0.002 mm makes this inspection pin an efficient choice for consistent plug and end‑measurement checks in daily workshop routines; its special steel construction and workshop specification ensure durability and reliable seating in gauges. Order the precision gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — Ø 10.49 mm, 50 mm length (Metav IndustryLine) Gauge pin, single — Ø 10.49 mm, 50 mm length is a compact inspection mandrel for precise end‑measurements, fit checks and reference tasks in workshop and quality environments Workshop version for daily use Diameter 10.49 mm for tight fits Length 50 mm for deep bores Precision tolerance ±0.002 mm Consistent checks through measured tolerances This inspection mandrel is engineered to deliver repeatable fit checks thanks to a nominal diameter of 10.49 mm combined with a narrow tolerance of ±0.002 mm. In practice, that means reliable verification of bore sizes and plug‑gauging tasks without frequent rework. The compact 50 mm length provides access to moderately deep features while keeping handling straightforward; the result is a measurable reduction in cycle variation during incoming inspection and setup checks. Robust material and workshop design for long service life Manufactured from special steel and specified as a workshop version, the pin resists wear under typical shopfloor handling and repeated engagement. Surface treatment and material choice reduce fretting and maintain the functional diameter over time, which preserves gauge accuracy between maintenance cycles. The single‑piece supply simplifies inventory management where dedicated reference pins are needed for go/no‑go tests or dimensional comparisons. Practical handling, storage and transport Supplied as an individual unit with protective transport packaging, the pin arrives ready for placement in inspection sets or dedicated fixture pockets; delivery includes a protective case to avoid damage during transit. The modest weight and compact form factor make it suitable for portable inspection kits or fixed gauge nests. Traceable identification via SKU and GTIN supports process documentation and keeps quality records coherent across small and medium production runs. For application advice, order options or to discuss specification matching contact Metav Werkzeuge in Emmerich; our consultants will advise on suitability, alternative diameters and batch supply. Technical data Article number: M323.A49 SKU: M323.A49 GTIN: 4061905062896 Label: Gauge pin, single, Ø 10.49 mm, length 50 mm Facts Diameter: 10.49 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Delivered in transport case Single piece supply Category: Gauge pin / inspection pin FAQ What is this pin best used for? The gauge pin is intended for end‑measurement checks, plug‑gauging and fit verification; the Ø 10.49 mm nominal diameter and tight tolerance make it suitable for precision fit checks and reference tasks. Is the pin supplied individually or in sets? This article is supplied as a single gauge pin; the delivery includes a protective case appropriate for transport. What material and durability can be expected? Made from special steel and specified as a workshop version, the pin offers robust wear resistance suited to frequent use on the shopfloor. Can this pin verify tight tolerances in inspection routines? Yes; with a tolerance of ±0.002 mm and a nominal diameter of 10.49 mm, the gauge pin supports accurate pass/fail checks and dimensional control within typical workshop QC processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.51mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Benefit from precise dimensional control and robust workshop design: a 10.51 mm nominal diameter, 50 mm length and a measured tolerance of ±0.002 mm ensure repeatable go/no-go checks and reliable in‑process verification. Supplied in a transport box as a workshop execution, this pin combines accuracy and durability for routine inspection tasks. Order the gauging pin directly via Metav Werkzeuge or ask our consultants if needed. Gauging pin M323.A51 — 10.51 mm diameter, 50 mm length (Metav IndustryLine) The gauging pin M323.A51 is a workshop‑grade test pin designed for fast dimensional checks and plug‑gauge applications in production and inspection environments. Workshop‑grade construction Diameter 10.51 mm nominal High tolerance ±0.002 mm Supplied in transport box Precision where it matters A nominal diameter of 10.51 mm combined with a declared tolerance of ±0.002 mm makes this test pin suitable for tasks that require small clearance verification and tight fit assessments. The stated accuracy describes the maximum deviation expected during manufacture; in practical terms this means the part can be relied upon for consistent pass/fail checks where micrometric differences determine assembly acceptance. The compact length and controlled geometry reduce bending and ensure that the contact zone presents a stable reference, promoting repeatable results during routine inspection sequences. Durable, workshop‑ready construction Manufactured from special steel and specified as a workshop version, the pin withstands the demands of regular use on the shop floor. The 50 mm length provides a convenient handling length while keeping the centre of mass close to the contact face, which helps to avoid lever‑induced errors. At approximately 0.1 kg, the component is robust without being cumbersome, and the finish supports easy cleaning and long service life under normal workshop conditions. Supplied in a transport box, the item is protected in transit and stored safely between uses. Practical integration into inspection workflows This single test pin is intended for straightforward integration into existing gauging routines: use it for alignment checks, bore verification and plug‑gauge comparisons where a defined nominal shaft is required. Its compact format simplifies handling during assembly checks and fixture trials, while the clear nominal dimension and tolerance facilitate traceability in inspection records. For specialised setups or batch traceability, refer to the article number and GTIN when documenting the tool in quality systems to maintain consistent identification across procurement and inspection documentation. Choose the Metav IndustryLine M323.A51 gauging pin from Metav Werkzeuge for dependable dimensional control and consult our specialists in Emmerich for tailored delivery and technical advice Technical Data Article number: M323.A51 GTIN: 4061905063466 Material: Special steel Type: Single gauging pin Data Nominal diameter: 10.51 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop version Supplied in transport box Single‑piece test pin FAQ What tolerance can be expected from this gauging pin? The gauging pin M323.A51 is manufactured to a tolerance of ±0.002 mm, making it suitable for tight clearance and fit checks in production inspection. What material is the pin made from and how does that affect use? The pin is made from special steel, providing wear resistance and dimensional stability for routine workshop inspections and handling. Is the item delivered ready for workshop use? Yes, the pin is supplied as a workshop execution and delivered in a transport box, ready for immediate use or secure storage. How is the M323.A51 typically applied in inspection processes? It is used for plug‑type checks, bore verification and basic alignment tasks where a defined nominal shaft diameter is required for go/no‑go decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.53mm Gauge Pin 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
A compact workshop gauge pin that combines tight dimensional control with robust construction: 10.53 mm diameter and 50 mm length with a stated runout accuracy of ±0.002 mm support repeatable end‑measure checks and go/no‑go verifications. Supplied in a protective transport case and made from special steel, it is ideal for routine fit inspections and assembly controls. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification matching. Gauge pin, single 10.53 mm (50 mm length) — Metav IndustryLine workshop version A gauge pin, single 10.53 mm (50 mm length) designed for precise end‑measure and fit verification in workshop metrology applications. Workshop version for robust use Diameter precisely 10.53 mm Tolerance ±0.002 mm for accurate checks Supplied in protective transport case Repeatable fit checks with industry‑grade tolerance The workshop‑grade pin delivers consistent measurement performance thanks to a machining tolerance of ±0.002 mm, which reduces scatter between repeated checks. With a nominal diameter of 10.53 mm and a shaft length of 50 mm, the component is suitable for short‑run verification tasks and fixture adjustments where tight concentricity and repeatability matter. The combination of controlled diameter and minimal runout means fewer false rejects and less rework during assembly and inspection cycles. Built to withstand workshop handling Produced in a workshop version and fabricated from special steel, the pin resists everyday handling and maintains dimensional stability under regular use. Its compact mass (approx. 0.1 kg) makes it easy to position in gauges and fixtures without adding excess inertia. Delivery in a protective transport case preserves the ground surfaces during storage and transit, ensuring the pin arrives ready for immediate use in production or quality control environments. Fast integration into inspection routines As a precision checking tool, the pin slots directly into existing go/no‑go gauges, collar checks and bench fixtures, accelerating routine inspections. Using a dedicated gauge pin for end‑measure reference simplifies set‑up and shortens cycle times during first‑article inspection or batch acceptance tests. Traceable identification via GTIN and SKU supports stock management and reduces administrative overhead when standardising inspection kits across several workstations. Practical information for procurement and logistics The single gauge pin format is well suited for modular inspection kits and spares inventory. Its compact size and protective case make handling and storage straightforward, while the clear technical identifiers simplify ordering and internal part control. For purchasing teams seeking a robust, repeatable verification tool, the pin offers a balance of precision and practicality for workshop metrology. For procurement or technical matching of Metav IndustryLine gauge pins, contact Metav Werkzeuge in Emmerich by phone or e‑mail to discuss delivery and integration into existing inspection kits: +49 2822 7131930 / info@metav-werkzeuge.com Technical data Article number: M323.A53 GTIN: 4061905063480 Material: Spezial-Stahl Category: Messstifte Manufacturer: Metav IndustryLine Facts Diameter: 10.53 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Single gauge pin Delivered in protective transport case for transport End‑measure reference (endmasse) FAQ What inspection tasks is this gauge pin suitable for? The M323.A53 gauge pin is suitable for end‑measure checks, fit and assembly verification, and use in go/no‑go fixtures where a precise 10.53 mm reference diameter is required. Is the pin supplied ready for use or does it need additional preparation? The M323.A53 is supplied in a protective transport case and ready for immediate use in workshop inspection routines without further preparation. How does the stated tolerance affect measurement reliability? A tolerance of ±0.002 mm ensures high repeatability for routine checks; this narrow tolerance reduces variability and supports consistent pass/fail decisions during production inspections. Can this pin be used in fixture calibration or as a wear reference? Yes, the precision pin can serve as a stable end‑measure reference in fixtures and as a benchmark for checking wear on mating components during preventive maintenance. Which product identifiers help with stock management? Use the SKU M323.A53 and GTIN 4061905063480 to manage inventory, order replacements and document the part within inspection kits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.54mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop design for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.A54 — 10.54 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.A54 is a single precision measuring dowel designed for end‑dimension verification and fit checks in workshop and inspection environments. High‑precision tolerance ±0.002 mm Diameter 10.54 mm for exact fit 50 mm hardened length for stability Workshop-grade special steel construction Precision that secures process accuracy The compact measuring dowel delivers a tolerance of ±0.002 mm, providing a measurable advantage where small deviations have direct impact on assembly quality. With a nominal diameter of 10.54 mm, the part establishes a defined reference for plug‑type checks and gauge setting; this reduces the need for repetitive adjustment and lowers the probability of rework. The stated accuracy is suitable for quality control tasks where traceable, repeatable results are required and where clear numerical limits support decision making in production. Robust construction for repeatable handling Constructed from special steel and presented in a workshop configuration, the pin combines dimensional stability with resistance to handling wear. The 50 mm length offers a balance between engagement depth and rigidity so that measurements remain reproducible during insertion and extraction cycles. The solid construction minimises elastic deformation under normal usage, enabling long service life and consistent performance for routine inspection or assembly applications in trade and light industry. Practical use and benefits in the workshop As a single, compact reference element, the measuring dowel is ideal for end‑dimension checks, go/no‑go trials and quick reference fits on jigs and fixtures. Its low weight (approx. 0.1 kg) and handy format support efficient handling on the shop floor; the simple geometry also eases cleaning and visual inspection. The combination of precise diameter and controlled length makes this tool well suited to integration into inspection benches where fast, reliable checks are needed to maintain flow and ensure conformity with drawing tolerances. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and procurement at info@metav-werkzeuge.com or +49 2822 7131930 to secure the M323.A54 gauge pin for immediate integration into measurement routines. Technical data Article number: M323.A54 GTIN: 4061905063497 Brand: Metav IndustryLine Material: Special steel Accuracy: ±0.002 mm Facts Diameter: 10.54 mm Length: 50 mm Weight: 0.1 kg Single item configuration Special features Workshop execution Single gauge pin for end‑dimension checks Compact, rigid geometry for repeatable use FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.A54 from Metav IndustryLine is specified with a tolerance of ±0.002 mm, making it suitable for high‑precision end‑dimension checks. Is the measuring pin suitable for routine shop use? Yes, the workshop‑grade construction and special steel material of the M323.A54 are intended for regular handling and repeatable checks in workshop environments. What are the primary applications for this dowel? Typical uses include end‑dimension verification, plug‑type fit checks and quick reference fitting on fixtures; the 10.54 mm diameter and 50 mm length support these tasks reliably. How compact is the tool for handling and storage? With a length of 50 mm and a weight around 0.1 kg, the measuring dowel is compact and easy to position, handle and store alongside other inspection tools. Does the product come as a single item or part of a set? This entry refers to a single gauge pin (SKU M323.A54) supplied individually for flexible deployment in inspection and assembly workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.55mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability and compact 50 mm form factor for reliable end‑measurement checks; the precision tolerance ±0.002 mm ensures reproducible results in workshop inspection routines. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for specification matching. Gauge pin, single – 10.55 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single is a precision checking pin for end‑measurements and reference checks in workshop and production inspection. Workshop version, robust construction Diameter 10.55 mm, tight tolerance Length 50 mm for compact checks Made from special steel, hard‑wearing High precision for repeatable inspection results The gauge pin is manufactured for tasks that demand consistent repeatability. With a nominal diameter of 10.55 mm and a manufacturing tolerance of ±0.002 mm, the pin provides a defined datum for end‑measurement procedures and small‑bore checking. Such a tolerance level reduces measurement uncertainty in routine controls and supports traceable comparison between batches — a clear advantage when reproducible fits or clearances are required in machining and assembly processes. Robust workshop design that endures daily use Constructed from special steel, the checking pin is finished for long service life under regular workshop conditions. The compact 50 mm length and modest mass make the pin simple to handle while remaining stiff enough for short‑range verification tasks. The workshop version balances durability with practicality: a tool that tolerates frequent use without compromising the dimensional reference required for quick go/no‑go assessments or comparative checks. Practical application in inspection workflows This single gauge pin is intended primarily for end‑measurement and small‑bore verification; it acts as a stable reference when aligning or checking mating parts and assemblies. Its compact format fits easily into inspection kits and bench setups, enabling operators to perform fast dimensional checks during setup, first‑off inspection or in‑process control. The straightforward geometry minimises handling complexity and supports quick throughput in repetitive inspection cycles. Engineered for reliability within a trusted supply chain Manufacturing consistency and clearly stated technical data help integrate the pin into quality procedures and documentation. The combination of special steel construction and a fine tolerance of ±0.002 mm delivers the technical basis for dependable pass/fail decisions and reduces rework. Purchasing via a reliable partner like Metav IndustryLine adds supply continuity and the practical benefits of an experienced metrology distributor for European workshops. Contact Metav Werkzeuge today to secure this Metav IndustryLine gauge pin (SKU M323.A55) for dependable end‑measurement checks and specification support Technical Data Article number: M323.A55 GTIN: 4061905063503 Category: Gauge pins Facts Diameter: 10.55 mm Length: 50 mm Mass: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Single piece delivery Intended for end measurements FAQ What dimensional tolerance does the gauge pin offer? The gauge pin, single from Metav IndustryLine (SKU M323.A55) is produced to a tolerance of ±0.002 mm, providing a defined reference for repeatable checks. For which inspection tasks is this pin suitable? The pin is intended for end‑measurement and small‑bore reference checks; it is suitable for routine bench verification and comparative fitting tasks in workshop environments. What are the physical dimensions and weight of the pin? The Metav IndustryLine gauge pin has a diameter of 10.55 mm, a length of 50 mm, and a mass of approximately 0.1 kg. What material is used and how does that affect durability? Made from special steel, the checking pin resists wear in regular workshop use and maintains dimensional stability for frequent inspection cycles. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.56mm Gauge Pin, Workshop Version, 50mm Length, Special Steel in Case - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, tight ±0.002 mm tolerance and compact dimensions for reliable end‑dimension checks; supplied ready for safe transport in a protective case. Order the gauge pin directly via Metav Werkzeuge or ask our consultants should additional specifications be required. Metav IndustryLine Gauge Pin — 10.56 mm diameter, 50 mm length Metav IndustryLine Gauge Pin for precise end‑dimension verification and setting tasks in production and inspection environments Workshop execution for everyday industrial use Diameter 10.56 mm with ±0.002 mm tolerance 50 mm hardened special‑steel length Supplied in transport case for safe storage Repeatable results for end‑dimension checks A compact, purpose‑built gauge pin designed to make routine dimension checks straightforward and dependable. The 10.56 mm diameter combined with a measured tolerance of ±0.002 mm provides a clear, verifiable basis for go/no‑go or reference checks on shafts, bores and assembly fixtures. Thanks to the short, precise geometry, measurement uncertainty from alignment errors is reduced; this supports consistent pass/fail decisions and reduces rework in machining and assembly processes. The industrial specification suits both bench inspection and in‑process verification. Robust workshop design that endures daily use Constructed from special steel and finished for workshop resilience, the test pin resists wear while maintaining its measuring surface form. The 50 mm length offers sufficient engagement depth for many common checks without becoming unwieldy, preserving stiffness where it matters. The workshop execution implies practical surface protection and handling features that speed routine use and prolong service life, so measuring setups remain stable and reproducible over repeated cycles. Practical integration into inspection routines Designed as a single, easily identifiable reference artefact, the pin supports quick fixture setup, gauge blocks pairing and end‑dimension verification during first‑off and batch inspections. Supplied in a protective transport case, the component arrives ready for controlled storage and transfer between workstations, reducing contamination and accidental damage. Marking and traceable SKU/GTIN allow straightforward inventory control and procurement for quality departments and toolrooms. Contact Metav Werkzeuge today to discuss the Metav IndustryLine gauge pin for your workshop needs — Metav Werkzeuge in Emmerich provides product expertise and fast, reliable supply; email info@metav-werkzeuge.com or call +49 2822 7131930 to request further technical details or tailored advice Technical data SKU: M323.A56 GTIN: 4061905063510 Label: Prüfstift, einzeln, 10,56 mm Länge 50 mm Manufacturer: Metav IndustryLine Weight: 0.10 kg Measurements / Core data Diameter: 10.56 mm Length: 50 mm Nominal tolerance: ±0.002 mm Mass: 0.1 kg Special features Workshop execution for industrial handling Material: special steel Intended use: end‑dimension and reference checks Delivered in protective transport case FAQ What tolerances can be expected from this gauge pin? The gauge pin from Metav IndustryLine is specified with a tolerance of ±0.002 mm, making the M323.A56 suitable for fine verification and tight control limits in workshop inspections. Is the pin suitable for routine fixture setting and assembly checks? Yes — the 50 mm length and robust special steel construction make this test pin appropriate for fixture positioning, reference seating and assembly verification in production environments. How is the component supplied to ensure preservation of accuracy? The Metav IndustryLine gauge pin is supplied in a protective transport case to prevent handling damage and contamination during storage and transfer between metrology stations. Can the pin be used as a go/no‑go reference or only for measurement? The item functions well as a precise reference for quick go/no‑go checks and as a calibrated reference for dimensional measurement tasks, given its tight tolerance and stable geometry. What identifiers help with ordering and traceability? Ordering and traceability are supported by the SKU M323.A56 and GTIN 4061905063510, which are noted on delivery documentation and internal inventory systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.57mm Gauge Pin 50mm Length Workshop Version, Special Steel in Case - Metav IndustryLine
Take advantage of a workshop-grade measuring probe that combines high repeatability and robust construction: the pin’s ±0.002 mm accuracy and Ø 10.57 mm working diameter make it suitable for precise end‑dimension checks and fixture set‑up. Order the test pin directly via Metav Werkzeuge or ask our consultants for application advice. Test pin M323.A57 — single measuring probe, Ø 10.57 mm, 50 mm length (Metav IndustryLine) The Test pin M323.A57 is a workshop‑grade measuring probe designed for accurate end‑dimension verification and quick fixture checks in metalworking and inspection stations Workshop version for robust use Ø 10.57 mm precision diameter 50 mm length for fixture checks Accuracy ±0.002 mm Precision tailored to end‑dimension control The single measuring probe delivers a clear metrological advantage where repeatable end‑measurements matter. With a nominal diameter of 10.57 mm and a verified displacement accuracy of ±0.002 mm, the probe is intended for tasks that require tight dimensional control. The high geometric stability of the special steel shaft reduces elastic distortion during contact, which supports consistent results across repeated measurements. This makes the component particularly useful in routines where small deviations affect downstream assembly or quality acceptance. Durable workshop design for everyday inspection Built as a workshop version, the probe combines a compact form with resistance to frequent handling and alignment operations. At 50 mm overall length and weighing approximately 0.1 kg, the probe balances reach and manoeuvrability for fixture checks, gauge validation and spot verifications on assemblies. The choice of special steel improves surface hardness and wear resistance compared with standard steels, extending service life under shop‑floor conditions while maintaining dimensional stability. Easy integration into measurement workflows Classified in the micro‑range (10–100 mm), this probe fits inspection benches and handheld gauge setups where small but critical dimensions are verified. Its straightforward geometry supports rapid positioning and repeatable contact points, helping to reduce set‑up time and the risk of human‑induced variation. By focusing on a single, well‑specified diameter and a short functional length, the design minimises bending and alignment errors, contributing to more reliable sampling during incoming inspection or process control checks. For reliable workshop inspection components, request the Test pin M323.A57 via Metav Werkzeuge — Metav’s specialists in precision tools will advise on suitability for specific inspection tasks and ensure prompt supply from Emmerich (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: M323.A57 GTIN: 4061905064289 Description: Test pin, single, Ø 10.57 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 10.57 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm eClass: 21170231 Special features Workshop version Material: Special steel Category: Test pins Story trigger: end‑dimension checks FAQ What is the nominal diameter of the probe? The probe has a nominal diameter of 10.57 mm as specified for the Test pin M323.A57. What accuracy can be expected from this measuring pin? The measuring probe offers an accuracy of ±0.002 mm, suitable for tight end‑dimension checks. For which tasks is this test pin intended? The pin is intended for end‑dimension verification, fixture checks and spot inspections on components where a controlled contact diameter is required. What material is the pin made from? The shaft is made from special steel, providing enhanced wear resistance appropriate for workshop use. Is the pin classified for a specific measurement range? Yes — with a diameter and length in the small‑scale range, the probe is classified within the micro‑range (10–100 mm) for precise, compact measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.58mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
The combination of ±0.002 mm tolerance, a precise Ø10.58 mm diameter and a robust 50 mm length ensures reliable fit checks and repeatable end‑measure verification; benefit from workshop‑ready durability and secure transport packaging. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin, single, Ø10.58 mm, length 50 mm — Metav IndustryLine, workshop grade, high accuracy The Test pin, single, Ø10.58 mm, length 50 mm is a workshop‑grade gauge pin designed for accurate end‑measure checks and go/no‑go fits in production and inspection workflows. High dimensional accuracy ±0.002 mm Diameter Ø10.58 mm for precise fits Robust workshop version with hard finish Delivered in transport case for safety Reduce measurement uncertainty with decisive accuracy A small improvement in gauge precision directly reduces rework and scrap. The pin’s ±0.002 mm tolerance provides a quantifiable benefit when validating bore diameters, locating holes or checking assembly clearances, making it suitable for high‑precision workshop tasks. The stated tolerance translates into tighter process control, allowing quality teams to rely on measurements rather than estimations and to document conformity in inspection reports. Built for everyday use in workshop environments Constructed from special steel and specified as a workshop execution, the pin balances hardness and resistance to surface damage with manageable handling. The 50 mm length offers a stable support area for probing and seating while the Ø10.58 mm diameter matches common fit classes used in fixtures and gauges. Supplied in a transport case for safe storage and transit, the design reduces the risk of nicks and preserves gauge integrity between uses. Practical integration into inspection and assembly routines This gauge pin suits applications such as end‑measure verification, fixture set‑up and reference checks where quick, reproducible contact is needed. As a straightforward physical standard, it complements digital calipers and micrometres by supplying a simple plug‑gauge reference that is easy to document. Identified under SKU M323.A58, the component is compact, low mass and readily managed in pick‑and‑place operations or manual inspection benches, supporting efficient throughput without complex setup. For workshop supply and technical advice on Metav IndustryLine gauge pins contact Metav Werkzeuge in Emmerich for immediate dispatch and specification support — phone +49 2822 7131930, eMail info@metav-werkzeuge.com Technical data SKU: M323.A58 GTIN: 4061905064296 Material: special steel Version: workshop execution Category: Gauge pin Facts Diameter (mm): 10.58 Length (mm): 50 Tolerance (mm): ±0.002 Weight (kg): 0.1 Special features Delivered in transport case (plastic or wooden) for transport Robust finish for frequent handling Intended for end‑measure verification and fit checks FAQ What is the declared tolerance and why does it matter? The declared tolerance of ±0.002 mm ensures reproducible fit checks; the M323.A58 gauge pin from Metav IndustryLine provides the dimensional certainty required for tight assembly and inspection limits. Which material is used and how does it affect use? The pin is made from special steel, chosen for a balance of hardness and wear resistance so that the gauge maintains dimensional stability under normal workshop handling. Is the test pin supplied ready for transport? Yes — the test pin is supplied in a transport case (plastic or wooden) to protect the surface and preserve accuracy during handling and shipment. Can this pin be used for fixture and jig set‑up? The Ø10.58 mm diameter and 50 mm length make the M323.A58 suitable as a reference for fixture and jig set‑up, providing a quick physical standard for locating and checking mating parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.5mm Gauge Pin Length 50mm Workshop Version, Special Steel in Case - Metav IndustryLine
Benefit from workshop‑grade robustness, special steel construction and high dimensional accuracy of ±0.002 mm for dependable end‑measure verification; order this gauge pin directly via Metav Werkzeuge or consult our advisors for specification matching. Gauge Pin M323.A50 — Single test pin, Ø10.5 mm, 50 mm length (Metav IndustryLine) A Gauge Pin M323.A50 engineered for precise end‑measure checks and routine verification tasks in workshop environments Workshop version with robust finish Diameter 10.5 mm, precision ±0.002 mm 50 mm hardened special steel length Single test pin for end‑measure checks Repeatable dimensional control for inline inspection The M323.A50 delivers consistent precision required for repeatable go/no‑go checks and end‑measure verification. With a manufacturing tolerance of ±0.002 mm, this measuring pin minimises uncertainty in serial inspection and provides a reliable reference for comparator gauges and fixture tests. The nominal Ø10.5 mm size suits many standard bore and plug checks, reducing the need for frequent gauge swaps and accelerating inspection throughput without compromising measurement integrity. Robust workshop construction for everyday use Constructed from special steel and configured as a workshop‑grade item, the pin withstands daily handling and routine insertion tasks. The 50 mm overall length gives sufficient reach for most component checks while maintaining low mass (approx. 0.1 kg) for safe, controlled manipulation. The compact design supports modular inspection setups and is easy to replace in gauge assemblies, helping to keep maintenance intervals short and workshop operations efficient. Practical integration into quality procedures This single measuring pin is suitable as a reference element within modular gaging chains, aiding fast acceptance testing and dimensional verification. Traceability is straightforward: order by SKU M323.A50 or GTIN for inventory control and documentation. The combination of small form factor and high accuracy supports both quick spot checks and structured inspection plans, enabling better process control and fewer downstream rejects while fitting seamlessly into standard workshop workflows. Contact Metav Werkzeuge for tailored advice on the M323.A50 gauge pin and workshop solutions; call +49 2822 7131930 or email info@metav-werkzeuge.com for prompt supply from Emmerich Technical data Article number: M323.A50 GTIN: 4061905063459 Label: Prüfstift, einzeln, 10,5 mm Länge 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 10.5 mm Length: 50 mm Tolerance/accuracy: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Version: Workshop‑grade Category: Gauge pin / Measuring pin Packaging: Single item FAQ What is the nominal diameter of this gauge pin? The M323.A50 (Metav IndustryLine gauge pin) has a nominal diameter of 10.5 mm and an overall length of 50 mm. What dimensional tolerance does it offer? The manufacturing tolerance is ±0.002 mm, providing high repeatability for inspection tasks. Which environments is the workshop version designed for? The workshop‑grade construction is intended for routine end‑measure checks, fixture verification and general machining inspection tasks. Is a calibration certificate supplied with the pin? Calibration is not specified for this SKU; customers requiring a traceable certificate should request calibration services when ordering. How is this pin typically used in inspection chains? It is commonly used as a reference element for plug checks, end‑measure verification and as part of modular gauge sets to support rapid dimensional control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.61mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of a precision‑ground 10.61 mm diameter combined with a 50 mm hardened length for reproducible end measurements in workshop routines. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification matching and stock information. Gauge pin, single, 10.61 mm — 50 mm length (Metav IndustryLine) A gauge pin, single, 10.61 mm, designed as a robust workshop reference for end‑measurement and fitting checks Precision ground 10.61 mm diameter 50 mm hardened length for stability Special steel for wear resistance Workshop version for robust use Reproducible measurement accuracy for everyday workshop control The component serves as a tactile reference that converts a simple check into a reliable inspection criterion. With a nominal diameter of 10.61 mm and a manufacturing tolerance of ±0.002 mm, the part provides tight repeatability suitable for fine alignment and go/no‑go verification. The compact 50 mm shaft length gives a stable seating against contact faces while keeping handling straightforward during series checks, reducing the need for repeated adjustments and limiting production downtime. Durable construction that withstands routine handling Manufactured from special steel, the pin is prepared for frequent contact and sliding in typical shop environments; hardness and surface finish are matched to resist wear and to preserve the reference diameter over prolonged use. The workshop version designation reflects reinforcements to withstand knocks and repeated insertion, so the reference dimension remains dependable across many cycles. This combination of material and finish delivers a low‑maintenance solution that contributes to fewer scrapped parts and steadier product quality. Practical traceability and simple integration into control routines Supplied as a single inspection pin and identifiable by SKU M323.A61, the part slots easily into a toolbox or inspection kit and can be recorded in inventory and quality documentation for traceable checks. The lightweight design (approximately 0.1 kg) keeps manipulation effortless while the measurable geometry supports quick visual and tactile assessments. If further clarification on tolerances or suitability for a specific assembly is required, the Metav technical team can advise on matching the pin to gauges, fixtures or measuring sequences to streamline the inspection process. For workshop reliability, request the Metav IndustryLine gauge pin via Metav Werkzeuge in Emmerich or contact our advisors at info@metav-werkzeuge.com / +49 2822 7131930 to confirm availability and compatibility Technical Data Article number: M323.A61 GTIN: 4061905064722 Material: Special steel Length: 50 mm Diameter: 10.61 mm Accuracy: ±0.002 mm Weight: 0.1 kg Version: Workshop execution Facts Nominal diameter: 10.61 mm Shaft length: 50 mm Tolerance: ±0.002 mm Mass: 0.1 kg GTIN: 4061905064722 Special features Precision ground surface Single delivery (individual pin) Robust workshop design SKU: M323.A61 FAQ What level of accuracy can be expected from this gauge pin? The gauge pin provides a manufacturing tolerance of ±0.002 mm, making the M323.A61 suitable for precise workshop checks and alignment tasks where tight repeatability is required. Is the material suitable for frequent use in a production environment? Yes, the pin is made from special steel and finished to withstand repeated insertion and contact typical of workshop use, ensuring long‑term dimensional stability. Can this pin be used as a reference for go/no‑go checks? The 10.61 mm nominal diameter and the stated tolerance allow the pin to function effectively as a reference for go/no‑go assessments and simple assembly verifications. How is the product identified for inventory and traceability? The item is supplied individually and identifiable by SKU M323.A61 and GTIN 4061905064722 for documentation in quality records and inventory systems. What is the recommended application for this gauge pin? The part is intended as an end‑measurement reference and fitting check in workshops, assembly jigs and inspection benches where a robust, precise reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.62mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
The combination of high repeatability (±0.002 mm), special steel construction and compact 50 mm length ensures fast, reliable end‑measurements in workshop inspection routines. Order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 10.62 mm, length 50 mm (M323.A62) — Metav IndustryLine The Gauge pin, single, Ø 10.62 mm, length 50 mm is a workshop‑grade reference pin designed for precise end‑measurement, assembly alignment and pass/fail checks in production and inspection tasks. Workshop version, robust construction Diameter Ø 10.62 mm, tolerance ±0.002 Length 50 mm for end‑measurements Made from special steel for longevity Precision that keeps production moving The Gauge pin, single, Ø 10.62 mm, length 50 mm delivers a high level of measurement certainty thanks to its specified tolerance of ±0.002 mm. In practical terms, this tight tolerance reduces the need for repeated adjustments and lowers scrap rates during assembly checks and feature validation. The compact 50 mm shaft provides a stable seating for end‑measurements and ensures repeatable contact geometry, which speeds up routine inspection cycles and supports consistent quality control in small‑batch and series production. Durable material and stable geometry for repeatable fits Constructed from special steel, the pin resists wear from frequent insertion and extraction in gauge blocks, fixtures and assembly jigs. The combination of a precisely turned Ø 10.62 mm diameter and a finished surface reduces play in locating features and maintains fit over time, delivering a longer service life compared with untreated reference pins. The result is fewer replacement events and less downtime for recalibration or tool changeovers, supporting smoother shop‑floor operation and predictable inspection throughput. Easy adaptation to workshop workflows and traceability Designed as a single reference element for end‑measurement tasks, this gauge pin integrates with standard fixture plates, comparator stands and manual gauging procedures. The clear product identifiers (SKU M323.A62, GTIN available) assist with inventory control and traceability in inspection documentation. As a workshop execution item, the pin is suitable for frequent use in production environments where robustness and simple handling are priorities, enabling straightforward storage alongside other measuring aids and reducing handling complexity. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for order placement or technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: M323.A62 GTIN: 4061905064739 Description: Gauge pin, single, Ø 10.62 mm, length 50 mm Facts Diameter: Ø 10.62 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Execution: workshop version Application: end‑measurements, alignment and inspection FAQ What tolerance does the gauge pin have? The gauge pin is manufactured to a tolerance of ±0.002 mm, ensuring high repeatability for end‑measurement and reference tasks. Which material is used for this reference pin? The pin is made from special steel, selected for wear resistance and stable dimensional performance under frequent use. For which tasks is this pin intended? Intended primarily for end‑measurements, assembly alignment and pass/fail checks in workshop and production inspection settings. How is the product identified for inventory and traceability? Identification is possible via the SKU M323.A62 and GTIN 4061905064739, which support traceability in inspection records. Is this pin suitable for fixture and jig mounting? Yes — the turned geometry and precise Ø 10.62 mm diameter make it well suited for locating features in fixtures, jigs and comparator setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.63mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Precision gauge pin in special steel (Ø 10.63 mm, 50 mm long) combines reliable dimensional control with workshop‑grade robustness; featuring a machining tolerance of ±0.002 mm, it supports consistent end‑measure verification. Order directly via Metav Werkzeuge or consult our advisors for application guidance. Pin gauge M323.A63 – single gauge pin Ø 10.63 mm, length 50 mm (Metav IndustryLine) A pin gauge M323.A63 designed for fast end‑measurement and diameter verification in workshop inspection and fixture setup Diameter Ø 10.63 mm for end‑measure checks Tolerance ±0.002 mm for reproducible results 50 mm length for handling and insertion depth Workshop version for robust, regular use Ensure process reliability with measurable precision This gauge pin delivers reproducible dimensional control where tight end‑measure checks matter. With a declared accuracy of ±0.002 mm, the pin is intended for verification tasks that demand small tolerance windows; the quoted figure reflects the manufacturing variability and enables reliable pass/fail decisions during assembly or incoming‑goods inspection. The use of special steel provides a stable reference surface for repeated use, helping to preserve nominal diameter and reduce measurement scatter compared with soft or untreated pins. Practical benefit: quicker checks, fewer stoppages Fitted at 50 mm overall length and a nominal Ø 10.63 mm, this single‑piece gage pin is sized to balance handling with adequate insertion depth for typical bores and fixtures. The compact length eases manual positioning and improves repeatability when used with go/no‑go rigs, depth gauges or simple visual inspection benches. Where throughput and uptime are priorities, a standardised gauge pin such as this reduces decision time on shop floors and supports consistent assembly quality without extensive retraining. Built for workshop environments and straightforward use Tagged as a workshop version, the construction emphasises durability for daily handling and fixture use. The cylindrical geometry and close dimensional control simplify integration into routine inspection sequences, whether as a reference for bore checks, plug fits or end‑dimension confirmations. For operations preferring tried‑and‑tested mechanical references over electronic probes, the pin acts as a low‑complexity, high‑reliability standard that complements existing metrology kits. Contact Metav Werkzeuge for batch availability and technical advice — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.A63 GTIN: 4061905064746 ECLASS: 21170231 Brand: Metav IndustryLine Material: Spezial‑Stahl Feature: Workshop version Weight: 0.1 kg SKU: M323.A63 Core dimensions & accuracy Nominal diameter: 10.63 mm Length: 50 mm Declared accuracy: ±0.002 mm Displayed measurement resolution: not applicable Design & special features Single gauge pin configuration End‑measure application (endmass) Robust finish suitable for workshop use Supplied as individual piece FAQ What is the primary use of this pin gauge? The pin gauge M323.A63 is used for end‑measurement and diameter verification, commonly employed for quick go/no‑go checks and fit confirmation in workshop inspection routines. Is the material suitable for repeated shop‑floor use? Yes; the gauge pin is manufactured from special steel, which provides a stable reference surface for repeated measurements and handling in workshop environments. What tolerance can be expected from this gauge pin? The product carries a declared machining tolerance of ±0.002 mm, making it suitable for applications that require tight dimensional control. Can this pin be used as a master for calibration of other instruments? As a mechanical reference, the pin gauge offers a reproducible nominal diameter; for formal calibration of instruments, traceable standards and documented calibration procedures should be used in line with company policy. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.64mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise repeatability and robust workshop design: the pin's ±0.002 mm tolerance and special steel construction deliver reliable end‑measure checks with minimal setup time. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.A64 — 10.64 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end‑measure verification and fixture setting in workshop inspection and toolmaking environments. Precision tolerance ±0,002 mm 50 mm effective length Special steel workshop version Supplied in a transport box Repeatable measurement where it matters The inspection pin offers a defined diameter of 10.64 mm with a verified ±0.002 mm tolerance, providing a reproducible reference for go/no‑go checking, alignment and fixture set‑up. Such repeatability reduces rework and inspection time by enabling clear go/no‑go criteria; the tight tolerance is suitable for high‑accuracy bench checks and small‑batch production control. The measured specification ensures compatibility with conventional gauge holders and basic datum gauges. Built for everyday workshop use Constructed as a workshop version from special steel, the pin balances hardness and toughness for frequent handling and contact with tooling and jigs. The 50 mm长度 offers a practical shaft for clamping or seating in fixtures while keeping the contact area accessible for visual confirmation. The robust finish resists light abrasion and preserves the calibrated diameter over repeated cycles, which supports steady inspection routines on the shop floor. Practical handling, transport and storage Delivery in a transport box protects the pin during storage and transit and simplifies organisation of inspection kits. The compact, single‑piece design minimises handling complexity and the 50 mm shaft length is compatible with most bench jigs and insert seats. Where fast interchange is required, the straightforward cylindrical geometry facilitates quick seating and withdrawal without additional adapters, making the item a convenient tool in recurring measurement tasks. Efficiency and process integration As a standard gauge pin, this component serves as a dependable hard reference for end‑measure checks, fixture alignment and manual verification steps in assembly or maintenance workflows. The simple geometry permits rapid comparison operations and, when combined with systematic inspection routines, contributes to measurable time savings and fewer measurement disputes. Traceable labelling (SKU and GTIN) supports inventory control and audit trails within quality systems. For precise workshop checks, request the Metav IndustryLine gauge pin M323.A64 from Metav Werkzeuge — technical advice and local supply from Emmerich are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.A64 GTIN: 4061905064753 Category: Gauge pins Label: Gauge pin, single, 10.64 mm diameter, 50 mm length Facts Diameter: 10.64 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: special steel Version: workshop execution Delivery: transport box for safe transport Use case: end‑measure checks and fixture setting FAQ What is the diameter and length of this pin? The gauge pin M323.A64 has a diameter of 10.64 mm and a shaft length of 50 mm. What tolerance is guaranteed for the pin? The inspection pin is specified to a tolerance of ±0.002 mm, suitable for fine workshop checks and alignment tasks. What material is the pin made from and how durable is it? Made from special steel, the pin is designed as a workshop version for repeated handling and routine inspection use. Is the pin supplied ready for transport and storage? Yes, the gauge pin is supplied in a transport box to protect the diameter and surface during transit and storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.65mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of high dimensional accuracy ±0.002 mm, robust special steel construction and a compact 50 mm length for reliable end‑measure and go/no‑go checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A65 — Gauge pin, Ø 10.65 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.A65 designed for precise end‑measure verification and fixture set‑up in workshop and inspection environments. High dimensional accuracy ±0.002 mm Diameter 10.65 mm for precision fits 50 mm hardened special steel length Precision where accuracy prevents rework The pin delivers a measured tolerance of ±0.002 mm, ensuring that critical fits and end‑measure checks are reproducible across repetitive sampling. This level of precision reduces the need for secondary adjustment and supports efficient go/no‑go decisions in the inspection routine. The 10.65 mm diameter corresponds to common clearance and plug checks, making the component suitable for final gauging and end‑of‑line verification tasks. Built for everyday workshop use Manufactured in special steel with a 50 mm usable length, the pin is provided in a practical workshop design that tolerates frequent handling and fast cycle checks. The compact format keeps the weight low while retaining rigidity for short‑range measurements, so operators can complete checks quickly without compromising stability. Delivery includes a transport case (plastic or wooden) that protects the pin during storage and transit, preserving its calibrated condition and surface quality. Simple integration into inspection workflows The smooth cylindrical geometry and standard diameter allow the pin to be used directly in fixtures, alignment tools and manual comparators. Labelling with SKU and GTIN simplifies inventory and traceability in quality systems. Where process documentation is required, the pin’s defined dimensions and declared accuracy support consistent measurement protocols and clear acceptance criteria, helping to reduce ambiguous tolerancing decisions on the shop floor. Contact Metav Werkzeuge today for stock availability and practical advice on integrating the Metav IndustryLine gauge pin into existing inspection setups — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.A65 GTIN: 4061905065453 Brand: Metav IndustryLine Facts Diameter: 10.65 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Workshop version design Delivered in transport case (plastic or wooden) Intended use: end‑measure checks and fixture gauging FAQ Is the diameter suitable for standard plug‑gauge checks? The diameter of 10.65 mm makes the pin suitable for common plug and clearance verifications and for use in fixtures requiring that nominal size. What level of accuracy can be expected during routine checks? With a declared accuracy of ±0.002 mm the M323.A65 provides the repeatability required for reliable go/no‑go decisions and final inspection sampling. Can the pin be used directly in alignment jigs? Yes. The robust finish and cylindrical geometry allow direct use in alignment jigs and manual comparators for rapid setup and verification. How is the pin supplied to ensure condition on arrival? The gauge pin is supplied in a protective transport case (plastic or wooden) to safeguard surface quality and dimensional integrity during transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.66mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a precise workshop-grade gauge pin with a small footprint and high repeatability; the M323.A66 delivers controlled end‑dimension checks thanks to its 10.66 mm diameter and a fine ±0.002 mm tolerance. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Metav IndustryLine Gauge Pin M323.A66 — 10.66 mm diameter, 50 mm length The Gauge pin, single, 10.66 mm, length 50 mm is a workshop-grade end-dimension gauge designed for fixture set-up and go/no‑go checks in metalworking and inspection cells Workshop-grade construction Diameter 10.66 mm, length 50 mm Tolerance ±0.002 mm Reliable checks for routine inspection The compact gauge pin serves as a straightforward, repeatable reference for end‑dimension verification. With a 10.66 mm diameter and a 50 mm working length, the component provides a stable contact area that minimises bending and measurement scatter during insertion and withdrawal. The declared ±0.002 mm deviation positions this pin for precision tasks where tolerances are tight but caliper-level equipment remains practical. The result is faster decision cycles at the inspection bench and fewer reworks on production lines. Robust workshop performance and handling Made from special steel, this single test pin is manufactured to resist surface wear and maintain form under frequent use. The workshop-grade execution balances hardness and toughness so that fixtures, jigs and holding devices can be set up with confidence. Its modest mass and ergonomic dimensions make manual handling straightforward during batch set-up, while the material choice supports longevity under typical shop conditions. This combination reduces downtime and keeps throughput steady in small-batch and series production. Integration, traceability and practical applications The pin is suitable for use as a reference plug in assembly checks, alignment tasks and end‑dimension control of turned or milled parts. Marked with the SKU M323.A66, the item is easy to reference in inventory systems and work orders. Where repetitive insertion cycles occur, the smooth finish and dimensional stability help preserve mating bore quality. For workshops looking to standardise inspection points across machines, this pin provides a compact, reliable datum that complements existing gauges and handheld measuring tools. Contact Metav Werkzeuge for application guidance on the Metav IndustryLine gauge pin M323.A66 — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss suitability for specific fixtures and production workflows Technical data Article number: M323.A66 GTIN: 4061905065460 Brand: Metav IndustryLine Facts Diameter: 10.66 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version suitable for fixture and end‑dimension checks Intended use: end dimensions / reference plug FAQ What is the intended use of this gauge pin? The gauge pin M323.A66 is intended for end‑dimension verification, fixture set‑up and go/no‑go checks in workshop inspection and assembly operations. Is the M323.A66 suitable for repeated insertion into hardened bores? Yes, the pin is made from special steel and designed for workshop use; however, matching bore hardness and lubrication strategy should be considered to avoid accelerated wear. How precise is the gauge pin for inspection tasks? The M323.A66 carries a tolerance of ±0.002 mm, making it suitable for precision checks where sub‑thousandth‑millimetre repeatability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.67mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, high dimensional accuracy (±0.002 mm) and compact handling for precise end‑measurement tasks; Order the (test pin) directly via (Metav Werkzeuge) or ask our consultants if needed Test pin M323.A67 — precision 10.67 mm diameter, 50 mm length (Metav IndustryLine) A single test pin for precise end‑measurements and fixture checks in workshop environments, designed for repeatable dimensional control. Workshop-grade construction Diameter 10.67 mm precision fit Length 50 mm for fixture checks Accuracy ±0.002 mm Precision where it counts: consistent end‑measurement control The compact test pin is engineered for repeatable end‑measurement and go/no‑go checking in everyday workshop workflows. With a diameter of 10.67 mm and a length of 50 mm, the component falls into the Micro measurement class (10–100 mm), which combines rigidity with a size that is easy to handle when checking small assemblies or jig interfaces. The indicated accuracy of ±0.002 mm supports fine tolerance verification and reduces uncertainty in routine inspections, providing a reliable reference point in production control. Smooth integration into fixtures and gauges for efficient checks Built as a workshop‑grade single pin, this item is suitable for mounting in test fixtures or using as a reference probe during assembly verification. The special steel construction ensures good wear resistance and dimensional stability under normal workshop conditions; the modest weight of 0.1 kg aids quick repositioning and handling. Because the design focuses on a clear functional purpose, measurement and inspection processes become more efficient: fewer tool changes, faster cycle times and stable results for repetitive tasks. Practical advantages for quality assurance and traceability Beyond the immediate measurement benefit, the simple geometry and standard dimensions make the pin a low‑effort addition to a quality toolbox. The product's compact form factor supports quick visual and tactile checks while the precise diameter and straightness allow it to serve as a reliable gauge for final dimensions. For teams aiming to democratise precision in the workshop, this pin offers a cost‑effective way to secure repeatable checks without complex equipment. Contact Metav Werkzeuge today for ordering information or technical advice on Metav IndustryLine precision test pins and workshop gauges Technical data Article number: M323.A67 GTIN: 4061905065477 Manufacturer: Metav IndustryLine Weight: 0.1 kg Material: Special steel Facts Diameter (mm): 10.67 Length (mm): 50 Accuracy: ±0.002 mm Special features Workshop version Single test pin delivery Category: Test pins Precision class: Micro (10–100 mm) FAQ What is this test pin designed for? The Metav IndustryLine test pin M323.A67 is intended for end‑measurement checks, fixture verification and simple go/no‑go tasks in workshop and production environments. What accuracy can be expected from the pin? The component is specified with an accuracy of ±0.002 mm, suitable for fine tolerance checks and repeatable dimensional control in small assemblies. Which material is used for the pin and what does that mean? The pin is made of special steel, providing good wear resistance and dimensional stability for standard workshop use. Is the pin delivered as a single item or as part of a set? This item is supplied as a single test pin suitable for immediate use in fixtures or as a reference probe. Can this pin be used in existing fixtures and gauges? Yes — the standard diameter and length make it straightforward to integrate into common fixture designs for routine verification tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.68mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, ±0.002 mm tolerance and a compact 10.68 mm diameter for reliable end‑dimension checks; this precision component supports repeatable inspection routines and shortens setup time in production control. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.A68 (10.68 mm Ø, 50 mm length) – Metav IndustryLine A Gauge pin M323.A68 designed for end‑measurement and reference checks in workshop metrology, ideal for plug and bore verification as well as fixture alignment tasks. Workshop‑grade precision design Diameter 10.68 mm, length 50 mm Tolerance ±0.002 mm for tight checks Hardened special‑steel construction Engineered for dependable end‑dimension control The compact, single‑piece check pin offers a 10.68 mm nominal diameter with a 50 mm working length, providing a stable reference for go/no‑go verification and fixture set‑up. With a specified ±0.002 mm tolerance, the pin is suited to quality control tasks that demand fine repeatability; the tight tolerance reduces uncertainty when verifying bore sizes or mating features. The special steel construction combines wear resistance with dimensional stability under routine contact checks, extending service life and preserving inspection accuracy. Practical integration into workshop inspection routines Designed as a pragmatic tool for production and maintenance environments, this gauge pin simplifies go/no‑go sequences and manual measurement comparisons. The single‑pin format requires minimal handling and fits common test fixtures and gauges; as a result, cycle times for simple checks are shortened. The hardened surface and true cylindrical form allow for consistent seating and alignment during repetitive use, supporting faster decision making on the shop floor and fewer secondary adjustments during assembly verification. Quality assurance and traceability for everyday use Manufactured under the Metav IndustryLine label, the pin supports routine calibration procedures and parts inspection standards. The clear specification of ±0.002 mm provides an objective basis for acceptance criteria in inspection logs and production documentation. Lightweight and compact, the component is easy to store and transport between stations while maintaining the workshop‑grade durability required for frequent handling. For bespoke inspection setups, the pin's predictable behaviour during seating and measurement reduces variability and contributes to a stable quality record. For precise end‑dimension control and reliable workshop inspection, choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to confirm suitability for specific applications Technical data Article number: M323.A68 SKU: M323.A68 GTIN: 4061905065484 Brand: Metav IndustryLine Key figures Diameter: 10.68 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Design & features Material: Special steel Type: Single gauge pin / check pin Application: End‑dimension checks, plug and bore verification Workshop version FAQ What inspection tasks is this gauge pin suited for? The gauge pin is designed for end‑dimension checks such as bore verification, fixture alignment and go/no‑go tests; the Metav IndustryLine M323.A68 is intended where a compact reference diameter is required. Is the tolerance suited to precision measurement in production control? Yes, the specified ±0.002 mm tolerance for the M323.A68 supports tight inspection criteria and repeatable manual checks within standard workshop and production QC processes. What material and hardening can be expected? The M323.A68 is made from special steel with a hardened surface, chosen to deliver wear resistance and stable dimensional behaviour during frequent seating and contact checks. Can the gauge pin be used in automated inspection fixtures? The single‑piece, true‑cylindrical geometry of the check pin allows integration into fixtures and manual or semi‑automatic inspection setups; confirm fixture compatibility with Metav Werkzeuge for specific automation requirements. How is the part identified for inventory and traceability? Identification is provided via SKU M323.A68 and GTIN 4061905065484, enabling clear traceability in inspection records and stock systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.69mm Gauge Pin 50mm Workshop Version - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop design to streamline inspection and reduce rework. The combination of a nominal Ø 10.69 mm, a tight ±0.002 mm tolerance and a compact 50 mm length ensures reliable go/no‑go and reference checks in daily production; order directly via Metav Werkzeuge or contact their consultants for application advice. M323.A69 Gauge pin — single, Ø 10.69 mm, length 50 mm (Metav IndustryLine) A M323.A69 gauge pin intended for quick dimensional checks and go/no‑go testing in workshop metrology, supplied as a single precision pin for straightforward integration into inspection routines Single gauge pin, nominal Ø 10.69 mm Precision tolerance ±0.002 mm 50 mm special-steel shank for workshop use Robust workshop execution for daily handling Reliable tolerance for repeatable inspection The main benefit is consistent, measurable control: with a nominal diameter of 10.69 mm and a stated tolerance of ±0.002 mm, this pin provides a clear, objective reference for acceptance tests. Such a tight tolerance supports rapid go/no‑go decisions and reduces ambiguous measurements that can interrupt production flow. In practice, the precision pin shortens inspection time by removing the need for iterative checks and helps maintain throughput without sacrificing quality. Built for daily workshop conditions Constructed from special steel and offered in a workshop version, the pin resists routine wear while remaining easy to handle on the shop floor. The 50 mm length gives a dependable reference length for many fixture and gauge arrangements without excess bulk, allowing single‑handed placement and quick repositioning. The compact, robust design lowers the risk of accidental damage during frequent use and supports long service life under normal operational stresses. Practical uses and handling advantages As a single‑unit gauge pin, the M323.A69 fits directly into fixture holes, control benches and comparator setups for immediate verification tasks. It functions as a tactile and dimensional standard for quick entry/exit testing, alignment checks and simple calibration routines. The plain cylindrical form makes cleaning and visual inspection straightforward, while the nominal diameter facilitates compatibility with common locating and checking fixtures used in general mechanical and toolroom environments. Traceability and integration into workflows The product is supplied with clear identification for traceability and inventory management, allowing easy matching with inspection records and process documentation. Using a dedicated gauge pin as a reference element helps to formalise quality routines and ensures measurable results during incoming inspection, in‑process control or final checks. The combination of durability, defined tolerance and compact format makes this pin a practical asset in standardised inspection sequences. For workshop‑grade, precision reference hardware from Metav IndustryLine, request the M323.A69 through Metav Werkzeuge — contact the Emmerich team for product matching and delivery at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.A69 GTIN: 4061905065491 Label: Prüfstift, einzeln, 10,69 mm Länge 50 mm Facts Nominal diameter: 10.69 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Version: workshop execution Supply: single gauge pin FAQ What tolerance does the gauge pin provide? The M323.A69 gauge pin is specified with a tolerance of ±0.002 mm, suitable for precise go/no‑go checks and dimensional reference use. What material is the pin made from? This gauge pin is manufactured from special steel, selected for durability in workshop environments and straightforward maintenance. Is the pin supplied as a single unit or as part of a set? The product is supplied individually as a single gauge pin under the designation M323.A69 for direct use or inclusion in custom fixtures. What are the typical applications for this gauge pin? Typical uses include quick dimensional checks, fixture alignment, go/no‑go testing and general workshop inspection tasks where a compact, accurate reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com