Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
10.08mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from a workshop‑grade gauge pin that combines ±0.002 mm repeatability with a precise 10.08 mm diameter and a convenient 50 mm length for reliable end‑size inspection; order the part directly via Metav Werkzeuge or contact their specialists for application guidance. Gauge pin, single — 10.08 mm Ø, 50 mm length (Metav IndustryLine) Gauge pin, single, 10.08 mm length 50 mm is a compact inspection pin for end‑size verification and go/no‑go checks in mechanical workshops and metrology benches. Workshop version for robust daily use Diameter 10.08 mm for end‑size checking Tolerance ±0.002 mm for precise gauging Special steel for wear resistance and longevity Precision for repeatable end‑size checks The compact design delivers consistently high repeatability for end‑size verification. With a measured diameter of 10.08 mm and an indicated tolerance of ±0.002 mm, this inspection pin belongs to the Micro class of measuring pins (measurement range 10–100 mm), which is optimised for fine mechanical parts and short measuring faces. The narrow gauge and controlled manufacturing tolerances reduce measurement scatter, helping to avoid rework and minimise scrap rates in serial checking tasks. Engineers benefit from a tool that converts dimensional stability directly into predictable production outcomes. Built for the workshop: durability and handling advantages Constructed from special steel, the single gauge pin is intended for frequent handling in a workshop environment; the material choice emphasises wear resistance and dimensional stability under repeated contact. At a length of 50 mm, the pin provides sufficient gripping length and support for quick manual checks while remaining stiff enough to preserve straightness and surface integrity. The workshop version designation signals a balance between robustness and metrological quality, making the component suitable for bench checks, fixture validation and inline control stations. Practical integration into inspection routines As a single gauge pin in the Messstifte category, this item is straightforward to incorporate into existing control fixtures, plug gauges and reference stacks. Traceability is supported by the SKU and GTIN, which simplify inventory and inspection record keeping. The compact format allows mounting in comparison jigs or use as a reference for caliper verification, enabling fast go/no‑go decisions on the shop floor. Backed by Metav IndustryLine’s distribution and technical knowledge, the pin fits into an efficient quality workflow without complex set‑up or specialist tooling. Contact Metav Werkzeuge in Emmerich for supply and tailored application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.A08 GTIN: 4061905064548 Category: Messstifte Brand: Metav IndustryLine Facts Diameter: 10.08 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg eCl@ss: 21170231 Special features Material: Special steel Design: Single gauge pin Version: Workshop execution Label: Prüfstift, einzeln, 10,08 mm Länge 50 mm FAQ What is the primary application of this gauge pin? The gauge pin is designed for end‑size verification and plug‑gauge checks in mechanical workshops; the Metav IndustryLine gauge pin (SKU M323.A08) suits short‑range dimensional control and routine go/no‑go inspections. How accurate is the pin and what repeatability can be expected? With a stated tolerance of ±0.002 mm, the gauge pin offers high repeatability for Micro‑class measurements, making it suitable where sub‑thousandth‑of‑a‑millimetre control is required. Which materials and environments is the pin intended for? Manufactured from special steel for wear resistance, the inspection pin is intended for standard workshop environments and frequent contact use; it is marketed as a workshop‑grade component. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.09mm Gauge Pin, Single, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of high metrological precision, a robust workshop design and secure transport packaging to keep inspection routines fast and reliable; order the gauge pin M323.A09 directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.A09 — single gauge pin, Ø 10.09 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.A09 is a single precision probe intended for end‑size verification and locating tasks in workshop and inspection environments, combining compact dimensions with industrial robustness to support repeatable measurements. Precision diameter Ø 10.09 mm, tolerance ±0.002 mm 50 mm special‑steel body for robust handling Workshop‑grade design for daily use Supplied in a transport box for protection Accuracy that secures quality and reduces rework The core advantage lies in the high precision of the component: a diameter of Ø 10.09 mm with a stated tolerance of ±0.002 mm. This level of conformity ensures that simple end‑size checks and go/no‑go comparisons are decisive, so fewer ambiguous measurements occur and downstream rework is reduced. The tight tolerance supports stable quality control routines and shortens decision cycles at incoming inspection and during in‑process checks. Built for the shop floor to withstand daily handling Manufactured from special steel and offered in a workshop execution, the pin is dimensioned at 50 mm length and designed for rugged use. The short, stiff geometry gives predictable behaviour when used for locating or as a reference gauge, while the material choice balances wear resistance and machinability. Supplied in a transport box, the item is protected during storage and transit, preserving surface condition and measuring reliability for immediate use on the bench. Practical integration for efficient inspection workflows The single‑piece design simplifies handling and identification: compact format, low mass and clear traceability make set‑up and fixture changes faster. The gauge pin is suited to repetitive tasks such as end‑size verification, locating in jigs and quick dimensional checks where a repeatable datum is required. With the manufacturer SKU and GTIN available for inventory control, the component integrates easily into procurement and stock management processes, contributing to uninterrupted production routines. Contact Metav Werkzeuge for product clarification, application advice or to request delivery information for the Metav IndustryLine gauge pin M323.A09 at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M323.A09 GTIN: 4061905064555 Weight: 0.1 kg Material: special steel Diameter: 10.09 mm Length: 50 mm Tolerance: ±0.002 mm Facts Category: gauge pin (Messstifte) Execution: workshop version Packaging: supplied in transport box Special features Single gauge pin for end‑size checks Compact, stiff geometry for repeatability Suitable for fixture locating and inspection FAQ What is the exact diameter and tolerance of this gauge pin? The gauge pin M323.A09 has a diameter of 10.09 mm with a tolerance of ±0.002 mm, specified for precise end‑size verification. Which material is used for the pin? This item is made from special steel, chosen to provide a balance of wear resistance and durable handling on workshop floors. Is the pin suitable for locating and end‑size checks? Yes; the component is intended for locating and end‑size inspection tasks where a compact, repeatable datum is required. How long is the pin and how is it delivered? The pin measures 50 mm in length and is supplied in a transport box to protect the surface during storage and shipment. Can the pin be integrated into inventory and inspection workflows? The gauge pin M323.A09 is delivered with manufacturer identification (GTIN and article number) for straightforward inventory control and rapid integration into inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.11mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise end‑measurement capability and robust workshop design to speed up setup and reduce rework. With a nominal diameter of 10.11 mm and a tolerance of ±0.002 mm, this inspection pin offers repeatable checks for small components; order via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 10.11 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single 10.11 mm Ø, 50 mm length is a workshop‑grade inspection pin intended for precise end‑measure and plug‑checking tasks in fine mechanical and toolroom environments. Workshop version for daily use Nominal diameter 10.11 mm, length 50 mm High precision with ±0.002 mm tolerance Supplied in protective transport case Precision for micro‑scale measurements that can be trusted This inspection pin is designed for the micro range (measurement extent around 10.11 mm), where compact geometry and low bending are decisive. The tight ±0.002 mm tolerance positions the pin in the high‑precision category, making it suitable for fine gauging, small fixture validation and component end‑measures in watchmaking, sensor housings and micro‑assemblies. The small nominal diameter and short shank reduce deflection and support repeatable go/no‑go decisions, which shortens inspection cycles and lowers scrap rates. Built for workshop handling and long service life The workshop specification emphasises durability without sacrificing tactile control. With a 50 mm usable length and a mass of approximately 0.1 kg, the pin balances manoeuvrability and stability for frequent handling on the shop floor. Manufactured from special steel, the component offers wear resistance under regular use; the supplied protective transport case reduces the risk of transport damage and keeps reference dimensions intact between uses. The practical design lowers downtime for replacements and keeps calibration intervals predictable. Integrates into inspection processes and fixture tooling As a dedicated inspection pin, the unit supports efficient fixture checks and routine measurement workflows. Measurable benefits include faster setup of small tooling, consistent reference for plug‑gauging, and reduced operator variability when used alongside calibrated reference pieces. The item marked here as the Metav IndustryLine gauge pin is compatible with standard inspection jigs and fits compact slots and bores where stability and exact diameter are required. Documented tolerances assist in quality records and help maintain repeatable measurement outcomes. Contact Metav Werkzeuge for application guidance or to secure the Metav IndustryLine gauge pin: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.A11 GTIN: 4061905064579 Manufacturer: Metav IndustryLine Facts Diameter: 10.11 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Protective transport case included FAQ What applications are suitable for this inspection pin? This gauge pin is intended for end‑measure checks, plug‑gauging and fixture validation where a nominal 10.11 mm diameter is required; it is suitable for fine mechanical assemblies and small bore inspections. What level of accuracy does the pin provide? The pin is specified with a tolerance of ±0.002 mm, which supports high‑precision inspection tasks and repeatable go/no‑go assessments. What material is used and how durable is the pin? Manufactured from special steel, the pin is designed for workshop durability and regular handling; proper storage in the protective case prolongs service life. Is a protective case supplied? Yes, the item is supplied with a protective transport case to prevent damage during storage and transit. Can the pin be integrated into existing gauges and fixtures? Yes, the M323.A11 gauge pin is compatible with standard small‑bore fixtures and plug‑gauging setups used in precision inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.14mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of a compact workshop-grade test pin that combines tight dimensional control, robust special steel construction and a ±0.002 mm tolerance for reliable end measurements; order directly via Metav Werkzeuge or contact our consultants for application guidance. Gauge pin M323.A14 — single 10.14 mm, 50 mm length (Metav IndustryLine) A Gauge pin M323.A14 designed for precise end‑measurement and bore verification in workshop metrology, presented as a single, workshop‑grade test pin for production and inspection tasks. Workshop version for robust daily use Diameter 10.14 mm, precision ±0.002 Length 50 mm, hardened special steel Supplied individually for one-off checks Dependable, workshop‑grade construction that reduces rework The workshop execution of this test pin is intended to withstand repetitive use on the shop floor while maintaining dimensional stability. Manufactured from special steel and finished for inspection use, the pin offers a 10.14 mm nominal diameter with a fine ±0.002 mm tolerance that supports repeatable plug and bore checks. This combination of material selection and narrow tolerance reduces the likelihood of marginal fits and downstream rework, improving throughput in production and inspection processes. Precision that makes production control more reliable Measured control points such as end dimensions and bore diameters require components with predictable behaviour; the narrow tolerance of this pin directly supports those quality objectives. With a working length of 50 mm, the pin is long enough for many common bore depths while remaining stiff for accurate alignment in gauges and fixtures. The result is a practical instrument for statistical process control and incoming inspection, where numerical certainty helps reduce false rejects and supports faster decision‑making on the shop floor. Simple handling, clear function and broad workshop applications Delivered individually for straightforward inventory and immediate use, the test pin is suited to manual inspection benches, fixture setup and go/no‑go verifications on production lines. The workshop version prioritises durability and ease of handling: short setup times, straightforward interchangeability with other gauge pins and uncomplicated storage make it a pragmatic choice for maintenance and quality teams. Its compact dimensions also mean minimal interference in confined fixtures and straightforward integration into existing inspection procedures. For application advice or to procure Metav IndustryLine gauge pins, contact Metav Werkzeuge GmbH in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations and fast supply Technical data Article number: M323.A14 GTIN: 4061905065149 Brand: Metav IndustryLine Label: Gauge pin, single, 10.14 mm length 50 mm Facts Diameter: 10.14 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Supplied individually Material: special steel Application: end measurements / bore verification FAQ What is the primary use of this gauge pin? The gauge pin M323.A14 is intended for end measurement and bore verification in workshop metrology and inspection routines. Which tolerance class does the pin adhere to? The test pin is manufactured to a tolerance of ±0.002 mm, providing fine dimensional control for precision checks. Is the material suitable for routine shop‑floor use? Yes, the pin is made from special steel and presented in a workshop execution intended for repeated handling and regular inspection tasks. Can this pin be integrated into gauges and fixtures? The 50 mm length and standard diameter make the pin suitable for use in common fixtures, plug gauges and inspection jigs. How is the pin supplied and identified? The item is supplied individually and can be identified by Article number M323.A14 and GTIN 4061905065149. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.15mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of workshop-grade robustness combined with micrometric accuracy and compact reach to ensure reliable end‑measurement and repeatable inspection cycles; order directly via Metav Werkzeuge or request tailored advice from our consultants. Gauge pin, single 10.15 mm — 50 mm length (Metav IndustryLine) Gauge pin, single 10.15 mm — a hardened inspection pin for end measurements and go/no‑go checks in workshop environments Workshop version for robust everyday use Diameter precisely 10.15 mm for end measurements Length 50 mm for access to recessed bores High repeatability with ±0.002 mm tolerance Precision where it matters The inspection pin is engineered for reliable end‑measurement in production and maintenance. Its nominal diameter of 10.15 mm and a specified accuracy of ±0.002 mm make it suitable for gauging small bores, verifying fits and confirming final shaft diameters. The compact design and hardened shaft reduce elastic deflection during contact, which improves repeatability compared with softer or longer pins. This level of dimensional control supports efficient quality routines and reduces the need for repeated checks. Built for workshop environments Designed as a workshop version, the pin combines a special steel construction with surface treatments that resist wear during frequent handling. The 50 mm length offers enough reach for recessed measurements while remaining easy to manipulate by hand or with simple fixtures. Robust machining and a grounded seating face ensure consistent contact geometry, so measurement deviations due to seating error are minimised. The practical build suits everyday inspection tasks on production lines and in toolrooms. Practical benefits and handling Using a dedicated inspection pin streamlines checks during setup and routine inspection: the defined diameter provides a quick physical reference for go/no‑go decisions and end‑dimension verification. Where traceable records are required, the item can be logged by SKU and GTIN for inventory and calibration schedules. The compact mass and conservative length lower the risk of tipping or misalignment, which helps maintain the stated ±0.002 mm performance in workshop conditions. Secure workshop‑grade precision from Metav IndustryLine — contact Metav Werkzeuge for procurement advice or to confirm suitability for specific inspection tasks at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.A15 GTIN: 4061905062292 SKU: M323.A15 Facts Diameter: 10.15 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: special steel Version: workshop execution Category: gauge pin / inspection pin FAQ What diameter does the gauge pin have? The gauge pin from Metav IndustryLine is specified at 10.15 mm diameter for precise end‑measurement tasks. Is the pin suitable for recessed bore checks? Yes. The 50 mm length provides reach into moderately recessed bores while preserving stability for accurate checks. What accuracy can be expected during routine use? The inspection pin carries a stated repeatability of ±0.002 mm, making it appropriate for fine workshop gauging and end‑dimension verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.16mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
A compact inspection solution that combines 10.16 mm nominal diameter with a tight ±0.002 mm fit for repeatable end‑dimension checks; robust workshop construction and 50 mm length keep handling and alignment simple. Order the gauge pin directly via Metav Werkzeuge or consult their specialists for application guidance. Gauge pin M323.A16 — single 10.16 mm test pin, 50 mm length (Metav IndustryLine) The gauge pin M323.A16 is a single inspection pin intended for precise end‑measure verification and go/no‑go checks in workshop and inspection environments. Single gauge pin, 10.16 mm diameter 50 mm length for deeper bore checks Special steel, workshop execution Tolerance ±0.002 mm for tight inspection Consistent measurement where it matters The compact inspection pin delivers a 10.16 mm nominal diameter with a verified ±0.002 mm manufacturing tolerance, which translates to dependable repeatability in routine checks. Such tight dimensional control is especially valuable when verifying bore diameters, assembly fits or end‑dimensions on turned components. The small form factor reduces the risk of bending during insertion, while the specified tolerance supports traceable acceptance criteria in quality documentation. Durable design for workshop use Manufactured from special steel and specified as a workshop execution, this test pin tolerates regular handling and quick verification workflows. A 50 mm working length allows access into moderately deep bores without compromising stiffness, and the controlled surface finish minimises marking on precision parts. The straightforward single‑piece design simplifies cleaning and eliminates moving parts, making it practical for high‑frequency inspections on the shop floor. Practical integration into inspection routines As a dedicated inspection tool, the pin is suitable for quick go/no‑go assessments, end‑measure comparisons and as a reference for optical or tactile setups. The modest mass and compact size make it easy to store alongside inspection kits or to incorporate into fixture checks. Identification by SKU (M323.A16) and GTIN supports inventory control and ensures the exact tool specification is ordered and recorded for quality records. Contact Metav Werkzeuge to confirm compatibility with existing inspection procedures or to discuss delivery and availability of the Metav IndustryLine gauge pin M323.A16 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: M323.A16 GTIN: 4061905062308 Label: Gauge pin, single, 10.16 mm diameter, length 50 mm Category: Gauge pins (Messstifte) Manufacturer: Metav IndustryLine Facts Diameter: 10.16 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Single, solid test pin construction FAQ What are the nominal diameter and length of this gauge pin? The gauge pin (M323.A16) has a nominal diameter of 10.16 mm and a working length of 50 mm, suitable for standard bore verification tasks. How precise is the inspection pin for dimensional checks? The Metav IndustryLine gauge pin M323.A16 is produced with a tolerance of ±0.002 mm, providing the tight control required for repeatable end‑measure inspections. Which material is used for this pin and what does that mean for workshop use? Made from special steel, the pin is specified in a workshop execution that balances wear resistance and handling robustness for frequent use on the shop floor. Can this pin be used for go/no‑go testing in assembly controls? Yes; as a single, solid inspection pin the M323.A16 is suitable for quick go/no‑go assessments, locating checks and reference comparisons within production and inspection workflows. How is the item identified for stock and traceability? Identification is via SKU M323.A16 and GTIN 4061905062308, which supports accurate ordering and integration into inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.18mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
A workshop-grade gauge pin in 10.18 mm diameter and 50 mm length offers tight repeatability and industrial robustness; with a declared tolerance of ±0.002 mm and manufacture from special steel, it supports reliable end‑measurement and inspection tasks. Order this item directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 10.18 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single for precise end‑measurement and reference checks in workshop and inspection environments Workshop version construction Diameter 10.18 mm for end‑measure checks Tolerance ±0.002 mm for repeatable results Supplied in a transport case Precise sizing for repeatable end‑measurements The pin is manufactured to a nominal diameter of 10.18 mm with a length of 50 mm, delivering a clearly defined reference for end‑measure and fit checks. The declared accuracy of ±0.002 mm means that the pin can serve as a reliable go/no‑go datum when verifying small bores, pins or mating parts; the narrow tolerance reduces measurement scatter and lowers the risk of false rejects. Classified in the micro range (10–100 mm), this format is optimised for fine mechanical assemblies where short gauge lengths help maintain stiffness and minimise bending during probing. Robust material and workshop suitability Made from special steel, the pin is engineered for stable geometry under regular use, offering wear resistance and dimensional stability that sustain repeatable measurements over time. The workshop version specification prioritises resilience to handling and everyday use rather than purely cosmetic finish, so the component remains a dependable reference in production and maintenance environments. Supplied in a transport case, the pin is protected during storage and transport, reducing the likelihood of dings that could compromise accuracy. Practical handling and inspection benefits Compact mass and straightforward geometry make this gauge pin quick to deploy during inspection routines; the modest weight supports easy manual handling while the defined diameter simplifies visual alignment in jigs and fixtures. The simple form factor speeds routine checks and reduces cycle time in small‑part inspection workflows, contributing to consistent throughput and measurable efficiency gains. Confidence in dimensional checks is improved by the combination of tight tolerance and durable material, which together lower rework and support reliable quality control. For application guidance or to request the Metav IndustryLine gauge pin (SKU M323.A18) with transport case, contact Metav Werkzeuge for a tailored recommendation and procurement assistance Technical data Article number: M323.A18 GTIN: 4061905062858 Label: Gauge pin, single, 10.18 mm length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 10.18 mm Length: 50 mm Weight: 0.10 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop execution Supplied in transport case Category: gauge pins FAQ What material is the pin made from? The pin is made from special steel, chosen for dimensional stability and wear resistance appropriate to workshop use. What tolerance does the pin offer for measurement work? The pin is specified with a tolerance of ±0.002 mm, providing high repeatability for end‑measurement and fit verification. Is a transport case included with the pin? Yes, the item is supplied in a transport case to protect the gauge pin during storage and handling. Which applications suit this gauge pin best? The pin is intended for end‑measurement, reference checking and fit control in fine mechanical and workshop inspection tasks; its dimensions place it in the micro range for small components. What is the article number or SKU for ordering? The SKU for this gauge pin is M323.A18, which can be used for ordering and identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.19mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of a compact, workshop-grade measuring pin that combines high precision and robust handling: the 10.19 mm diameter with a verified ±0.002 mm form accuracy and a 50 mm overall length supports reliable end-measurement checks and fixture setting. Order the gauge pin directly via Metav Werkzeuge or contact our advisors for specification matching. Gauge pin, single, 10.19 mm — length 50 mm (Metav IndustryLine) Gauge pin for precise end-measurement checks and fixture setting in workshop and inspection environments Precision diameter 10.19 mm, tolerance ±0.002 50 mm overall length for workshop fixtures Made from special steel, workshop version High-precision performance that shortens inspection time The single test pin delivers repeatable results where small deviations matter: with a diameter of 10.19 mm and an indicated form accuracy of ±0.002 mm, the component is suitable for fine gaging, go/no-go assessments and alignment tasks in production and maintenance. The compact geometry minimises handling uncertainty and the tight tolerance helps reduce rework by ensuring consistent fit into mating bores and fixtures. This measurable accuracy supports rational decision-making in quality routines and in-process checks. Robust handling and compact design for everyday workshop use Built as a workshop version from special steel, this measuring pin resists routine abrasion while staying easy to manoeuvre during frequent checks. The 50 mm overall length provides enough engagement for secure seating in most jigs without excessive overhang, improving ergonomic handling during repeated measurements. The compact, single-piece supply simplifies inventory management and fast replacement, helping to keep cycle times low and setup routines efficient. Traceability and integration into inspection routines Each item carries traceable identifiers suitable for systematic stock and inspection records; the single-pin format lends itself to being recorded and swapped rapidly during quality audits. The component is classified for end-dimension checks and pairs well with standard inspection tools and fixtures used in machining and assembly work. Where process documentation and reproducibility are required, this gauge pin supports robust workflows and clear measurement records. Secure this workshop-grade gauge pin from Metav IndustryLine via Metav Werkzeuge for dependable end-measurement performance and straightforward integration into inspection routines—contact Metav Werkzeuge for ordering assistance and technical advice. Technical data Article number: M323.A19 GTIN: 4061905062865 Manufacturer: Metav IndustryLine SKU: M323.A19 Facts Diameter: 10.19 mm Length overall: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg eCl@ss: 21170231 Special features Single gauge pin for end-measurement tasks Material: special steel Workshop version (Werkstatt-Ausführung) Intended use: end measurements (endmasse) FAQ What accuracy can be expected from this gauge pin? The gauge pin from Metav IndustryLine is specified with an accuracy of ±0.002 mm, making the M323.A19 suitable for precise end-measurement and inspection tasks. Which material is used for the pin and why does it matter? The pin is made from special steel, selected for wear resistance and stable dimensions under normal workshop conditions; this supports repeatable measurements in routine inspection work. Is the pin supplied as a single item or in sets? The product is supplied as a single gauge pin (SKU M323.A19), which simplifies replacement and inventory control for specific bore checks. Can this pin be used for fixture alignment and go/no-go checks? Yes, the diameter of 10.19 mm and the tight tolerance make it suitable for fixture setting, go/no-go assessments and general end-dimension verification in machining and assembly environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.1mm Gauge Pin Length 50mm Workshop Finish, Special Steel ±0.002 - Metav IndustryLine
Take advantage of the combination of high geometric accuracy, robust special-steel construction and compact handling for reliable end-dimension checks in workshop environments; order directly via Metav Werkzeuge or request application advice from our consultants. Gauge pin, single, 10.10 mm Ø, 50 mm length — Metav IndustryLine Gauge pin, single, 10.10 mm Ø, 50 mm length is a compact inspection pin designed for precise end-dimension checks, fixture setting and verification tasks in workshop and production environments Gauge pin Ø 10.10 mm, length 50 mm Precision tolerance ±0.002 mm Special steel, workshop version Single-piece test pin, compact format Consistent geometric precision for routine inspection The gauge pin delivers repeatable dimensional reference thanks to a certified manufacturing tolerance of ±0.002 mm, which places it in the range required for fine inspection and go/no‑go verification tasks. A nominal diameter of 10.10 mm combined with the 50 mm shank provides a stable insertion length for bore checks and jig setting, reducing measurement ambiguity. The stated tolerance should be considered when comparing to specification limits and when integrating the pin into inspection sequences; the compact form preserves concentricity and limits runout on short‑reach checks. Robust construction matched to workshop use Machined from special steel, the component is finished for workshop conditions and listed as a workshop version. This material choice yields a balance between wear resistance and machinability, which suits repetitive insertion and alignment tasks at the bench or on assembly lines. The single‑piece design minimises handling complexity and supports fast cycle checks. Where environment or surface protection matters, surface condition and handling routines influence service life; storing the pin in an organised system retains measurement quality over many operations. Practical integration and handling benefits Marked as SKU M323.A10, the compact format simplifies integration into existing test rigs, fixture bores and manual inspection trays. With a modest weight of 0.1 kg and a straight cylindrical geometry, the pin is easy to orient, index and position for quick repeat measurements. Use cases include end‑dimension verification, setting reference points in jigs and trial fitting for assembly runs. The product’s workshop orientation supports frequent use without complex maintenance procedures, while the precise geometry reduces time spent on corrective adjustments during setup. Contact Metav Werkzeuge today for application-specific recommendations or to reserve the M323.A10 gauge pin for your inspection setup — Metav’s team in Emmerich provides technical advice and fast supply for industrial metrology needs. Technical data Article number: M323.A10 GTIN: 4061905064562 Label: Prüfstift, einzeln, 10,10 mm Länge 50 mm Brand: Metav IndustryLine Numbers / Core technical data Diameter: 10.10 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop version Category: Gauge pins ECLASS: 21170231 FAQ What are the exact dimensions of this gauge pin? The gauge pin has a nominal diameter of 10.10 mm and a length of 50 mm; it is supplied under SKU M323.A10 for clear identification. What tolerance does the pin meet? Manufacturing tolerance is ±0.002 mm, providing the geometric consistency required for fine inspection and fixture setting. Which material is used for this test pin? The pin is machined from special steel and offered in a workshop version suitable for repeated use in production environments. For which tasks is this gauge pin suitable? Typical applications include end‑dimension verification, bore checking, jig and fixture setting, and trial fitting during assembly or quality checks. Is the pin delivered as a single item or part of a set? This entry describes the single test pin supplied individually under SKU M323.A10 by Metav IndustryLine. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.21mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact, workshop‑grade test pin that combines high repeatability and robust material for reliable end‑dimension checks; its precise tolerance and compact 50 mm length support fast in‑process gauging. Order the M323.A21 gauge pin directly via Metav Werkzeuge or ask the consultants if guidance is needed. M323.A21 gauge pin (single) — 10.21 mm diameter, 50 mm length (Metav IndustryLine) The M323.A21 gauge pin is a single precision test pin for end‑dimension verification and plug gauging in workshop inspection and quality control settings. Workshop‑grade execution Diameter 10.21 mm precision 50 mm length in special steel Tolerance ±0.002 mm Consistent end‑dimension verification for production use The M323.A21 serves as a compact, high‑precision checking pin for repetitive end‑dimension measurements and go/no‑go tests. With a certified dimensional tolerance of ±0.002 mm, the pin ensures tight repeatability in short‑run inspection routines and assembly checks; this reduces measurement uncertainty and supports clear pass/fail decisions on the shop floor. The small footprint and controlled geometry make it suitable for fixture use and quick verification of bore or shaft ends. Built for everyday workshop handling and transport Manufactured from special steel in a workshop execution, the pin resists wear while keeping surface integrity for repeated contact checking. At 50 mm length the component balances handling convenience with sufficient engagement depth for reliable contact. Delivery in a transport case protects the gauge during storage and transit, maintaining calibration state and surface condition. The compact weight and robust construction aid fast tool changes and simple insertion into gauging fixtures. Integrates into quality processes and inspection stations The pin is ideal for end‑measure applications and plug gauging where repeatability and traceability are required. Its precise diameter and tight tolerance facilitate statistical process control inputs and reduce false rejects in incoming or in‑process sampling. Lab‑style stability combined with practical workshop design makes this test pin a pragmatic choice for machinists, inspection technicians and maintenance teams seeking predictable measurement outcomes with minimal setup time. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to discuss suitability and procurement of the M323.A21 gauge pin for your inspection routines. Technical data SKU: M323.A21 GTIN: 4061905063381 Brand: Metav IndustryLine Diameter: 10.21 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Material: special steel Version: workshop execution Delivery: transport case for protection Application: end‑dimension checks, plug gauging FAQ What is the intended use of this gauge pin? The M323.A21 gauge pin is designed for end‑dimension verification and plug gauging in workshop inspection and quality control environments. How precise is the M323.A21 for repeatable checks? The test pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for short‑range inspection tasks. What material and protection are provided with the pin? The pin is made from special steel in a workshop execution and is supplied in a transport case to preserve surface condition and dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.24mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Reliable workshop‑grade gauge pin with a 10.24 mm diameter and a tight ±0.002 mm tolerance for repeatable reference and Go/No‑Go checks. Benefit from the special steel construction and a 50 mm length that ensures secure engagement and long service life; supplied in a protective transport box for safe handling. Order the gauge pin through Metav Werkzeuge or contact their consultants for application advice. Gauge pin, single — 10.24 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single, 10.24 mm length 50 mm is a workshop‑grade precision plug intended for reference measurements, fit checks and small‑bore inspection tasks in manufacturing and inspection stations. Workshop version for robust handling Diameter 10.24 mm, tolerance ±0.002 mm Length 50 mm in special steel Supplied in protective transport box Accuracy for repeatable reference measurements The pin is manufactured to a defined diameter of 10.24 mm with a verified tolerance of ±0.002 mm, which translates into consistent, repeatable fit-control performance across inspection cycles. Such nominal accuracy reduces uncertainty when establishing reference fits or checking bore diameters, so production decisions can be made on a factual basis. The tight tolerance and hardened finish minimise wear on mating surfaces and help preserve measurement integrity over time. Built for workshop use and straightforward handling Designed as a workshop version, the plug combines a practical 50 mm engagement length with the resilience of special steel, offering a balance between stiffness and manoeuvrability. The compact mass (0.1 kg) and familiar round geometry support rapid positioning during inspection, while the robust material choice delivers resistance to deformation and abrasion. Delivery in a protective transport box ensures the gauge arrives ready for use and remains protected in daily circulation. Supply reliability and fitment guidance As a component in Metav IndustryLine, this gauge pin is traceable via SKU and GTIN for easy inventory and procurement. The simple geometry makes it suitable for routine assembly checks, incoming inspection or jig validation where a precise cylindrical reference is required. For application‑specific guidance — for example, recommended pairing with bore gauges or plug sets — Metav’s consultancy can advise on compatible fixtures and handling practices to maximise service life and measurement confidence. Contact Metav Werkzeuge for tailored application advice or to secure the Metav IndustryLine gauge pin M323.A24 (10.24 mm diameter) for dependable workshop inspections — Metav Werkzeuge GmbH in Emmerich is available to assist with specifications and supply. Technical data Article number: M323.A24 GTIN: 4061905063411 Label: Gauge pin, single, 10.24 mm length 50 mm Manufacturer: Metav IndustryLine Specifications Diameter: 10.24 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Supplied in transport box FAQ What is the declared diameter and tolerance of the pin? The gauge pin M323.A24 is specified at 10.24 mm with a manufacturing tolerance of ±0.002 mm. Is the pin supplied ready for use and protected in transit? Yes. The Metav IndustryLine gauge pin is supplied in a protective transport box to prevent damage during transport and storage. For which tasks is this pin typically used? This type of precision plug is used for reference measurements, bore fit checks and quick Go/No‑Go verifications in workshop and inspection settings. Can the gauge pin be used for repeatability checks on small bores? Yes. With its tight tolerance and stable material, the pin is suitable for repeatability and fit-control tasks on small‑bore components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.25mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, sub‑micrometre tolerance, and robust workshop design for reliable end‑dimension checks; order the precision gauge pin directly via Metav Werkzeuge or consult the technical advisers if required. Precision gauge pin, 10.25 mm Ø — 50 mm length (Metav IndustryLine) Precision gauge pin, 10.25 mm diameter and 50 mm length for end‑dimension verification and fixture alignment in workshop and production environments Workshop‑grade construction Diameter 10.25 mm, length 50 mm Tolerance ±0.002 mm Special steel for durable service Dependable control for routine inspection tasks The compact gauge pin delivers consistent dimensional reference for assembly checks, go/no‑go tests and fixture setups. With a nominal diameter of 10.25 mm and a shank of 50 mm, it suits short‑reach applications where a stable datum point is required. The fine tolerance of ±0.002 mm reduces measurement scatter and shortens inspection loops, which supports faster throughput on production lines and fewer reworks. Robust materials and practical workshop design Manufactured from special steel, the pin resists wear in repeated insertions and provides a reliable contact surface for gauges and fixture bores. The workshop‑oriented construction balances hardness with surface finish to ensure longevity without compromising fit. Corrosion protection and a smooth ground surface assist in repeatable seating, which improves repeatability across successive measurements and simplifies quality assurance routines. Fast integration into metrology and assembly processes The pin is intended as a single‑piece testing element and integrates easily into test rigs, jigs and manual inspection benches. Its dimensions place it in the micro gauge category for compact metrology aids, making it suitable for fine mechanical assemblies and small‑part production. Using a standardised gauge pin like this one helps to align inspection results between workstations and reduces variation introduced by informal reference tools. Choose the Metav IndustryLine precision gauge pin for reliable end‑dimension checks and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.A25 GTIN: 4061905063428 Label: Prüfstift, einzeln, 10,25 mm Länge 50 mm Facts Diameter: 10.25 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Category: Micro gauge pin (10–100 mm range) Single test pin FAQ What tolerance can be expected from this gauge pin? The precision gauge pin (Metav IndustryLine, M323.A25) is specified with a tolerance of ±0.002 mm, suitable for tight workshop and inspection requirements. Which materials is the pin suitable for contacting? The pin is made from special steel and is intended as a non‑cutting reference element for contact with common engineered materials during measurement and alignment tasks. Can the pin be used in fixture alignment and assembly checks? Yes. The 10.25 mm diameter and 50 mm length make the test pin ideal for fixture set‑up, assembly verification and repeatable bore checking in small components. How does this pin support repeatability in production checks? Using a hardened, ground reference such as this pin ensures consistent seating and contact geometry, which reduces measurement scatter and improves repeatability across inspections. Is this item suitable for fine mechanical and watchmaking tasks? Classified within the micro gauge range, the pin is designed for compact metrology duties and fine mechanical work where a short, rigid reference is advantageous. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.26mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact precision tool with Ø 10.26 mm diameter, 50 mm length and accuracy ±0.002 mm for reliable fit checks and end‑measurement tasks; order the pin directly via Metav Werkzeuge or consult the team for batch supply and application advice. Gauge pin M323.A26 — single test pin, Ø 10.26 mm, 50 mm length The gauge pin M323.A26 is a precision test pin designed for workshop use, ideal for checking bore fits, end measurements and small mechanical components where compactness and repeatability matter Workshop execution for durable handling Precision diameter Ø 10.26 mm, tolerance ±0.002 50 mm overall length for compact inspections Made from hardened special steel Reliable fit checks for small components The compact design delivers a dependable reference for go/no‑go and clearance inspections. With a nominal Ø 10.26 mm and a short 50 mm overall length, this test pin is classified in the micro range for measuring tools — the preferred category for fine mechanical and small‑part work. The geometry and workshop specification ensure low flex and secure seating in jigs or bore checks, so the result is a consistent comparative measurement rather than a subjective estimate. Designed for repeatable precision and inspection throughput A stated accuracy of ±0.002 mm positions this pin for use in demanding measurement tasks where small deviations matter. The tight tolerance reduces rework and speeds decision making on production lines and inspection benches, contributing to measurable efficiency gains. Hardening and the choice of special steel maintain a stable contact surface, which helps preserve dimensional integrity over repeated cycles and ensures reproducible results from one inspection to the next. Material choice and handling benefits Constructed from special steel and supplied as a single test pin, this item balances wear resistance with the handling convenience expected in busy workshops. The short length lowers the moment arm during insertion and removal, making manual handling more controlled and reducing the risk of accidental bending. For inspection routines that demand a compact reference artefact, the combination of material and design supports longevity and consistent surface contact. How it fits into inspection workflows As a single‑piece gauge pin with a clear nominal diameter, the item integrates easily into existing test fixtures and bench procedures. It serves as a straightforward reference for bore gauges, micrometres and comparators when establishing end measurements or checking mating parts. The compact format is particularly useful where space is limited but repeatable, traceable checks are required, such as toolrooms, small‑batch production and maintenance inspections. Contact Metav Werkzeuge for specification advice and supply of the Metav IndustryLine gauge pin M323.A26 and ensure compatibility with existing inspection systems Technical Data Article number: M323.A26 GTIN: 4061905063435 Category: Messstifte (gauge pins) Label: Prüfstift, einzeln, 10,26 mm Länge 50 mm Facts Diameter: 10.26 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: special steel Workshop execution Single test pin SKU: M323.A26 FAQ What applications suit this gauge pin best? The gauge pin M323.A26 is intended for bore checks, end‑measure verification and small‑part fit inspection in workshop and toolroom environments where compact, repeatable references are required. How precise is the nominal diameter and what does ±0.002 mm mean in practice? The nominal Ø 10.26 mm is manufactured with a tolerance of ±0.002 mm, which denotes the maximum deviation allowed from the stated diameter during production; this level of precision supports tight fit assessments and reduces measurement uncertainty in comparative checks. Is the material suitable for repeated contact and light wear? Yes — the pin is made from special steel chosen for surface stability and wear resistance, making it suitable for repeated insertion into bores and use in inspection routines without rapid degradation. Can the pin be used in measuring fixtures and jigs? The compact 50 mm length and micro‑range diameter make the pin compatible with inspection fixtures and jigs designed for small components, ensuring stable seating and repeatable reference points. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.27mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Combining high repeatability (±0.002 mm), a compact 10.27 mm diameter and a robust 50 mm length, this inspection pin delivers dependable end‑measure checks in a small footprint; its workshop construction supports routine use on production benches. Order the gauge pin M323.A27 directly via Metav Werkzeuge or ask our consultants if needed. M323.A27 Gauge pin — single 10.27 mm diameter, 50 mm length (Metav IndustryLine) M323.A27 is a single inspection pin designed for precise end‑measure verification in workshop and small‑parts inspection applications. Compact 10.27 mm diameter for fine checks 50 mm length for deep reach Workshop version, sturdy construction High precision: ±0.002 mm tolerance Precision where small tolerances count The inspection pin is crafted for situations that require consistent, traceable end‑measure checks. With a nominal diameter of 10.27 mm and a supplied tolerance of ±0.002 mm, the pin supports tight quality control limits typical in component inspection and gauge setting. The compact geometry reduces the risk of bending or play during insertion, which improves repeatability compared with longer, slimmer pins. For manufacturers and quality technicians, this means fewer measurement rechecks and a clearer pass/fail decision at the inspection stage. Designed for everyday workshop use Built as a workshop version in special steel, the pin balances wear resistance with machinability so that routine use on production floors is practical. The 50 mm length provides sufficient reach for many internal and end‑face checks while remaining easy to handle by a single operator. Delivery in a transport box ensures the tool remains protected during storage and transit, reducing damage risk and downtime. These practical design choices translate into straightforward handling, lower maintenance effort and consistent measurement outcomes under normal workshop conditions. Integration into inspection routines and benefits The gauge pin is intended as a straightforward inspection aid for end‑measure and plug‑gauge tasks. Classified within the micro range (10–100 mm), it complements bench gauges and small fixture tooling, contributing to faster setup and more reliable in‑process checks. The robust tolerance specification supports statistical process control by reducing measurement uncertainty at the operator level, while the compact format helps when access is restricted. For procurement and workshop managers, the combination of precision, durability and compactness supports a measurable increase in inspection throughput and confidence. For precise end‑measure checks, request the Metav IndustryLine gauge pin M323.A27 from Metav Werkzeuge — contact the Emmerich team for ordering and tailored technical advice. Technical data Article number: M323.A27 GTIN: 4061905063442 Label: Gauge pin, single, Ø 10.27 mm, length 50 mm Facts Diameter: 10.27 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Delivered in transport box Classification: micro range (10–100 mm) FAQ What applications suit this inspection pin? This inspection pin M323.A27 is intended for end‑measure verification, plug checks and small‑part inspection in workshop and production environments. Is the pin suitable for high‑volume routine use? Yes, the workshop construction and special steel composition make the M323.A27 appropriate for frequent, routine checks under normal production conditions. How accurate is the gauge pin for quality control tasks? The gauge pin is specified to ±0.002 mm, providing the precision needed for tight tolerances in small‑component inspection. Does the delivery include protective packaging? The M323.A27 is supplied in a transport box to protect the pin during storage and shipment. Can this pin be used with existing plug‑gauge fixtures? The compact 10.27 mm diameter and standard length make the M323.A27 compatible with many bench fixtures and small plug‑gauge setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.28mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from the combination of tight tolerance, special‑steel robustness and compact dimensions for consistent inspection results; order the gauge pin directly via Metav Werkzeuge or consult our specialists if additional information is required. Gauge pin M323.A28 — single 10.28 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end‑measure checks and reference fitting in workshop and inspection environments. Workshop version for robust daily use Diameter 10.28 mm for precise fit Tight tolerance ±0.002 mm for accurate checks Dependable accuracy for routine inspection The gauge pin offers a declared tolerance of ±0.002 mm, making it suited to tasks where repeatable dimensional control is essential. This level of accuracy supports reliable go/no‑go checks and fit verification for press fits, bore checks and reference inspections. The specification is intended to reduce uncertainty in routine testing and to simplify decision‑making in quality control processes by providing a clear, measurable standard. Compact design that simplifies handling With a diameter of 10.28 mm and a length of 50 mm, the pin combines reach with manageable geometry for single‑handed handling on the shop floor. The workshop execution emphasises robustness: surfaces are finished for consistent contact, and the overall form minimises handling errors during repeated insertions. These design choices translate into fewer setup corrections and faster inspection cycles when checking small to medium bores. Integrates smoothly into workshop metrology kits Production and maintenance teams can use this test pin as a companion to calipers and micrometres for targeted dimensional checks, where a compact reference element is required. The modest mass and standardised diameter allow straightforward pairing with gauges and fixtures, supporting quick interchangeability. Where traceable measurement chains are needed, the pin functions as a practical, stable reference for comparative checks within internal quality workflows. Quality provenance and practical benefits Manufactured from special steel and supplied as a single unit, the product reflects a focus on consistent manufacturing quality and shop resilience. The compact form factor reduces storage complexity while the declared accuracy supports confidence in routine inspections. Metav’s role as a precision partner further ensures that the product reaches European customers with quality control filters applied at the distribution centre in Emmerich, underlining supply reliability and long‑term availability. Contact Metav Werkzeuge today to secure Metav IndustryLine inspection pins such as the M323.A28; expert advice and order support are available at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M323.A28 GTIN: 4061905064258 Category: Gauge pins Label: Single gauge pin, 10.28 mm diameter, 50 mm length Facts Diameter: 10.28 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution for daily use Supplied as a single test pin FAQ What tolerance does this gauge pin offer? The M323.A28 gauge pin is specified with a tolerance of ±0.002 mm, suitable for precise fit and inspection tasks. Is the pin intended for workshop environments? Yes, the product is a workshop execution designed for robust daily use and repeated inspection cycles. Can this pin be used for bore‑fit verification? The 10.28 mm diameter and precise tolerance make the pin appropriate for bore‑fit checks, reference fitting and comparative inspections. What material is the pin made from? The gauge pin is made from special steel, selected for stability and wear resistance in routine metrology tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.29mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise, workshop-grade measuring with a compact 10.29 mm diameter and a measured tolerance of ±0.002 mm, ensuring reliable repeatability in production checks; order directly through Metav Werkzeuge or consult our experts for specification matching. M323.A29 gauge pin — 10.29 mm diameter × 50 mm length, precision ±0.002 mm (Metav IndustryLine) A M323.A29 gauge pin designed for accurate end‑measurements and fixture checks in workshop and quality‑control environments Workshop‑grade special steel construction Diameter 10.29 mm, length 50 mm High repeatability with ±0.002 mm tolerance Precision that reduces rework and speeds inspection The compact design and the ±0.002 mm specification deliver measurable gains in process reliability. Built for fine measurement tasks, this gauge pin combines a controlled diameter of 10.29 mm with a short 50 mm length to reduce flex and vibration during use. The result is consistent positional reference and improved repeatability, which helps to cut down rework and minimise downtime in serial checks or assembly verification. Robust workshop construction for everyday handling Manufactured from special steel and executed as a workshop‑grade component, the pin tolerates regular handling on the shop floor without losing form. The short measuring length increases rigidity and simplifies single‑handed placement in fixtures or nests. This durability translates to longer service life and stable performance in typical machine‑shop and assembly applications where quick, reliable checks are required. Practical integration into inspection routines As a standard inspection element, the pin is suitable for quick go/no‑go checks, alignment aids and fixture set‑up. The declared accuracy of ±0.002 mm corresponds to a maximum deviation of 2 micrometres, allowing the pin to function as a trustworthy reference in both manual and semi‑automated measuring tasks. Traceable identifiers such as GTIN and SKU support inventory control and procurement workflows. Procurement and inventory benefits for quality teams Compact and lightweight, the pin is easily stored and handled across workshop zones; its nominal weight of 0.1 kg aids logistic planning. The nominal dimensions and clear technical specification make it straightforward to specify in bills of materials or replacement lists. For tailored lot sizes or compatibility checks with existing gauges, Metav Werkzeuge provides procurement support and data sheets on request. Contact Metav Werkzeuge to secure the M323.A29 for your inspection routine or to request application advice from our precision consultants in Emmerich Technical data Article number: M323.A29 GTIN: 4061905064265 SKU: M323.A29 Core measurements Diameter: 10.29 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Design: workshop execution Category: gauge pin for inspection FAQ What level of accuracy can be expected from this gauge pin? The M323.A29 gauge pin is specified to ±0.002 mm, corresponding to a maximum deviation of 2 micrometres under normal use. Is the pin suitable for precision fixture set‑ups? Yes; the short 50 mm length and 10.29 mm diameter provide good rigidity, making the pin suitable for fixture alignment and repeatable positioning tasks. Which material is used and what are the handling benefits? Made from special steel, the pin offers workshop durability and resistance to routine handling, supporting stable measurements over time. Can the pin be used for go/no‑go checks in production? The declared tolerance and robust design make the M323.A29 appropriate for rapid go/no‑go and comparative checks inside manufacturing and assembly processes. How is the product identified for procurement? Identification is available via SKU M323.A29 and GTIN 4061905064265 for straightforward ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.2mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high precision (±0.002 mm), a compact 10.2 mm diameter and a robust special steel construction for consistently reproducible end‑dimension checks; order this test pin directly via Metav Werkzeuge or contact their consultants for further advice. Test Pin M323.A20 – precision gage pin, 10.2 mm Ø, 50 mm length (Metav IndustryLine) The Test Pin M323.A20 is a single precision gage pin designed for end‑dimension checks and alignment tasks in workshop metrology. Precision diameter 10.2 mm Length 50 mm for deep reach High‑accuracy ±0.002 mm Workshop version, robust finish Reliable control for end‑dimension measurements This single gage pin is engineered for repeatable end‑dimension checks where tight tolerances matter. With a diameter of 10.2 mm and a length of 50 mm, the component combines compact form with sufficient reach for common workshop tasks. The specified accuracy of ±0.002 mm places it in the high‑precision category for gage pins, enabling consistent verification of fits, plug gauges and end faces. The construction supports stable contact and reduced measurement scatter, which helps maintain process reliability in small‑part inspection. Built to withstand workshop routines Produced in special steel and offered in a workshop version, this gage pin is designed for frequent handling and everyday use. The material choice balances wear resistance with corrosion protection, so the pin retains its geometry under repeated seating and extraction. Supplied as a single unit and packaged in a transport box for safe delivery, the item is easy to store and move between workstations. The compact mass and robust finish support quick insertion and handling during assembly checks or gaging operations, reducing downtime between measurements. Practical fit for metrology and end‑of‑line checks Classified in the micro range (measuring span around 10 mm), this precision pin suits applications in toolmaking, small‑component assembly and quality control where space and access are limited. The single‑piece design simplifies traceability and inventory management in a metrology kit. Where traceable calibration is required, Metav can advise on calibration options and certificates; otherwise the pin serves as a reliable reference for go/no‑go assessments and alignment tasks. The compact form and tight tolerance make the pin a practical component in both manual inspection benches and semi‑automated verification setups. Choose the Metav IndustryLine test pin for dependable end‑dimension control and contact Metav Werkzeuge for procurement or technical clarification: Metav Werkzeuge GmbH, Parkring 45, Emmerich. Technical Data Article number: M323.A20 GTIN: 4061905062872 Manufacturer: Metav IndustryLine Facts Diameter: 10.2 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Measuring range (max): 10.2 mm Special features Material: special steel Workshop version (robust finish) Delivery in transport box Category: gage pin / test pin FAQ What is the measurement tolerance of the test pin? The Test Pin M323.A20 has a declared tolerance of ±0.002 mm, suitable for high‑precision end‑dimension checks. Which material is used for the pin? The pin is manufactured from special steel for a balance of wear resistance and durability in workshop applications. Is the pin supplied in protective packaging? Yes, the test pin is delivered in a transport box to protect the item during shipment and handling. For which applications is this gage pin intended? This precision pin is intended for end‑dimension verification, alignment tasks and go/no‑go assessments in toolmaking and small‑part inspection. Can a calibration certificate be provided? If traceable calibration is required, Metav Werkzeuge can advise on available calibration services and certificates for the Test Pin M323.A20. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.32mm Gauge Pin Length 50mm Workshop Finish, Special Steel - Metav IndustryLine
Benefit from the combination of precise ±0.002 mm tolerance, robust special steel construction and a compact 50 mm length for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or contact our consultants for tailored advice. Gauge pin, single — 10.32 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single — 10.32 mm Ø, 50 mm length is a workshop‑grade precision pin for end‑measure verification and fixture checks in production and inspection environments. Workshop version for tough environments Diameter specified as 10.32 mm Tolerance ±0.002 mm for precise control Supplied in a transport case Reliable precision for routine inspection The gauge pin delivers a documented tolerance of ±0.002 mm, ensuring consistent dimensional references when checking end‑sizes and clearance fits. This level of repeatability supports tighter process control and reduces rework by providing a verifiable reference for plug seats, bores and assembly jigs. Classified in the micro range, the compact diameter and short shank make the pin especially suited to precise checks on small components where stiffness and minimal deflection are decisive. Built for workshop use and easy handling Constructed from special steel and presented in a workshop version, the pin resists routine handling and transport stress while retaining measurement integrity. The 50 mm shank length offers a balance between reach and rigidity; at approximately 0.1 kg the component is simple to position by hand or in lightweight holders. Supplied in a transport case, the pin arrives protected for storage and movement between bench and machine, reducing the risk of surface damage that would affect accuracy. Practical integration into inspection routines Compatibility with standard plug‑gauge fixtures and reference stacks makes the pin straightforward to introduce into existing inspection workflows. Marked by its clear specification and compact form, the item identified as M323.A32 is ideal for end‑measure tasks, first article inspection and fixture verification. Metav IndustryLine’s workshop focus means the component supports daily production work without adding complexity to handling or documentation. For workshop‑grade end‑measure reliability, request the Metav IndustryLine gauge pin (M323.A32) from Metav Werkzeuge — Metav’s Emmerich team can advise on fitment, delivery and suitable inspection workflows. Technical Data SKU: M323.A32 GTIN: 4061905064685 Label: Prüfstift, einzeln, 10,32 mm Länge 50 mm Facts Nominal diameter: 10.32 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Supplied in transport case Category: Messstifte FAQ What is the nominal diameter of the gauge pin? The nominal diameter is 10.32 mm as specified for the Metav IndustryLine gauge pin (M323.A32). Is a calibration certificate included with delivery? The product data does not indicate an ISO 17025 calibration certificate; calibration is not stated as included by default. What applications suit this gauge pin best? The pin is suitable for end‑measure checks, plug‑gauge references, fixture verification and first article inspection in workshop and production settings. How does the workshop version benefit daily use? The workshop version provides enhanced durability and handling resilience, and the supplied transport case reduces the risk of damage during routine movement or storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.33mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise control and robust workshop handling with this compact gauge pin: ±0.002 mm positional accuracy and special steel construction ensure reliable fit checks and repetitive measurements. Order directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin, single — 10.33 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single, 10.33 mm Ø, 50 mm length serves as a workshop‑grade reference pin for end‑measure checks, fit verification and assembly inspection in production and maintenance environments ±0.002 mm accuracy for repeatable checks Special steel construction for wear resistance 50 mm length for compact fixture use Workshop‑grade finish for everyday handling Reduce rejects with micrometric accuracy High recurring quality demands hinge on measurement certainty. The gauge pin M323.A33 delivers ±0.002 mm tolerance, which translates into significantly fewer false rejects and more consistent go/no‑go outcomes on mating parts. By converting a raw fit or bore check into a quantifiable result, the pin supports process stabilisation and reduces rework cycles. The numerical tolerance is easy to integrate into quality documentation and helps maintain traceable inspection records. Built for everyday workshop use and quick handling A tool that stays in service must withstand frequent handling. The workshop version of this reference pin combines a compact 50 mm length with a robust finish to resist surface damage during routine checks. The single‑piece supply and straightforward geometry make the item immediately usable at the bench or in a fixture, speeding up inspection steps without additional tooling. The solid construction promotes confident handling and predictable contact behaviour during repeated measurements. Seamless fit into inspection and assembly routines The simple cylindrical design facilitates rapid alignment into bores, jigs and gauges, supporting both manual and semi‑automated procedures. With a nominal diameter of 10.33 mm, the pin is suited to standard fit tests and end‑of‑line verification tasks where dimensional conformity must be proven quickly. The tool’s predictable geometry eases documentation of check results and allows for direct comparison with technical drawings or control plans. Material choice and long‑term reliability Manufactured from special steel, the pin balances surface hardness with dimensional stability to resist wear over many cycles. The material selection reduces the need for frequent replacement and preserves the pin’s original tolerance window in daily use. Where traceability is required, the supplied SKU and GTIN facilitate inventory control and calibration scheduling within maintenance plans. Speak with Metav Werkzeuge about integrating the 10.33 mm gauge pin into the workshop toolkit; our Emmerich team can advise on stock availability and suitable inspection workflows Technical data Article number: M323.A33 GTIN: 4061905064692 Manufacturer: Metav IndustryLine Facts Diameter: 10.33 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Special steel construction Workshop‑grade finish Single item delivery Category: gauge pins FAQ What tolerances can be expected from this gauge pin? The gauge pin M323.A33 is specified with an accuracy of ±0.002 mm, making it suitable for repeatable fit and bore checks in workshop environments. Is the pin suitable for fixture and jig checks? Yes, the 10.33 mm diameter and 50 mm length make the pin appropriate for use in fixtures and jigs where compact, repeatable reference elements are required. Which material is used for the pin and what are the benefits? The pin is made from special steel, offering a balance of wear resistance and dimensional stability for routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.34mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Precise, compact and workshop‑rated: the combination of ±0.002 mm accuracy, a 10.34 mm diameter and a 50 mm length ensures repeatable end‑measure checks and tight‑fit verification. Order this gauge pin directly via Metav Werkzeuge or ask our consultants for specification advice. Gauge pin, single Ø 10.34 mm — 50 mm length (Metav IndustryLine) Gauge pin, single, 10.34 mm, length 50 mm is a compact inspection pin designed for fast end‑measure verification and tight‑fit checking in workshop and inspection tasks. Workshop‑grade construction Diameter 10.34 mm for tight fits Length 50 mm for shallow bores High accuracy ±0.002 mm Repeatable accuracy for small components This compact inspection pin is designed for applications where repeatability and tight tolerances matter. With an indicated accuracy of ±0.002 mm, the part suits fine measurement tasks and inspection routines that demand minimal deviation. Classified in the micro range (measurement span around 10–100 mm), it benefits from a short gauge length that reduces bending and operator‑induced error. The use of special steel provides a hard-wearing contact surface that supports consistent results over many cycles, translating into fewer rechecks and a more efficient quality workflow. Practical benefits on the shop floor The workshop version construction prioritises robustness and straightforward handling. At 50 mm overall length and 10.34 mm diameter, the pin is easy to position in shallow bores, end faces or assembly checks without excess overhang. The solid geometry makes the component suitable for stack gauges, go/no‑go fixtures and manual inspection sets, delivering a fast and reliable feel during tactile checks. Because the design is intentionally compact, set‑up time is reduced and inspection steps can be carried out with greater rhythm—helping to keep production throughput steady. Material choice and handling guidance Manufactured from special steel, the pin offers a balance between hardness and corrosion resistance typical for workshop inspection tools. Routine care—wiping clean after use and avoiding prolonged exposure to moisture—preserves the reference surface and dimensional stability. The compact mass and geometry also simplify integration into inspection racks and gauge sets, permitting clear organisation of measurement equipment and easing traceability of individual items in a metrology cabinet or inspection station. Why this specification works for industry The combination of small diameter, short length and fine accuracy is ideal for end‑measure checks on precision parts, mating features and plug gauges where reproducible limits are required. As a product from Metav IndustryLine, the component is part of an offering that focuses on practical, reliable metrology for workshops and the supply chain. The technical specification supports efficient quality control loops: faster checks, less rework and a predictable contribution to overall process capability. Choose Metav IndustryLine gauge pins from Metav Werkzeuge for reliable inspection results — contact Metav Werkzeuge for product advice and order support. Technical data SKU: M323.A34 GTIN: 4061905064708 Facts Diameter: 10.34 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Category: Gauge pin Label: Prüfstift, einzeln, 10,34 mm Länge 50 mm FAQ What tolerance does the pin offer? The specified tolerance is ±0.002 mm for this gauge pin (SKU M323.A34), suitable for tight inspection limits. Which applications is this pin suited for? The pin is intended for end‑measure verification, tight‑fit checks and use in plug‑gauge fixtures on the shop floor. What material is used and how should it be cared for? The pin is made from special steel; normal care is recommended—keep clean and dry to preserve the reference surfaces. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.35mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precision and workshop-ready robustness: the M323.A35 gauge pin combines a 10.35 mm diameter with a fine ±0.002 mm tolerance and a 50 mm length to deliver repeatable end‑dimension checks. Order the inspection pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A35 — single gauge pin, 10.35 mm diameter, 50 mm length (Metav IndustryLine) A Gauge pin M323.A35 designed for reliable end‑dimension inspection and workshop measurement tasks, ideal for bore verification and fixture checks. Workshop-grade inspection pin Diameter 10.35 mm ±0.002 mm tolerance 50 mm length for deeper checks Special steel, robust and wear‑resistant Repeatable measurements through fine tolerance and controlled geometry The M323.A35 is engineered to provide consistent results in routine inspection tasks by combining a precisely ground shaft with a narrow tolerance of ±0.002 mm. This level of accuracy reduces measurement scatter and shortens inspection cycles in production control, because fewer rechecks are required when reference pins maintain dimensional stability. The 10.35 mm diameter is specified to match nominal bore checks and plug‑gauge applications, enabling straightforward integration into Go/No‑Go fixtures or comparative gauge sets. Emphasis is placed on repeatability and measurable performance rather than subjective claims. Robust workshop execution that keeps inspections on schedule Built in a workshop configuration from special steel, this single inspection pin is prepared for the demands of everyday shop use. The solid 50 mm shaft length allows secure seating in deeper bores and supports stable handling during manual checks. Surface hardness and wear resistance ensure long service life under regular contact, which lowers tool replacement frequency and contributes to sustained production uptime. A protective transport case is provided to preserve the gauge pin during storage and shipment, reducing the risk of nicks or contamination that would otherwise affect measurement quality. Clear identification and simple integration into inspection routines Identification is straightforward: the item is listed as M323.A35, allowing unambiguous ordering and stock control, and it carries GTIN 4061905065385 for traceable logistics. Supplied as a single inspection pin, it suits applications focused on end‑dimension verification, alignment, and fixture testing. At approximately 0.1 kg, the component is easy to handle and to include in inspection kits. For workshop managers and metrology technicians, the combination of defined geometry and robust material supports quick decision‑making when matching gauges to inspection tasks. Contact Metav Werkzeuge today to request the M323.A35 gauge pin with protective case and receive tailored advice on its suitability for specific inspection setups Technical data Article number: M323.A35 GTIN: 4061905065385 Brand: Metav IndustryLine Product: Single gauge pin Facts Diameter: 10.35 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Delivered in a protective case for transport Single item supply Intended for end‑dimension inspection FAQ What diameter and accuracy does the gauge pin offer? The M323.A35 gauge pin has a diameter of 10.35 mm and a stated tolerance of ±0.002 mm for precise end‑dimension checks. Is the gauge pin supplied with a calibration certificate? Calibration status is not specified in the product data; the M323.A35 is supplied as a single inspection pin and any calibration requirements should be requested from Metav Werkzeuge prior to purchase. Which inspection tasks is this pin suitable for? The pin is intended for end‑dimension verification, bore checks, alignment and fixture testing in workshop environments; the robust design suits frequent use. How is the item packaged for delivery? The M323.A35 is supplied in a protective case suitable for transport to preserve the measuring surface and prevent damage during handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.3mm Gauge Pin Length 50mm Workshop Version, Special Steel Case - Metav IndustryLine
Take advantage of precise reference dimensions, robust workshop construction and tight manufacturing tolerances for consistent end‑measure checks; order the part directly via Metav Werkzeuge or request guidance from their consultants. Gauge pin, single — 10.3 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single is a compact inspection pin designed for direct use in workshop measurement tasks and reference checks where a fixed diameter and short length are required. Workshop-grade construction Precision Ø 10.3 mm × 50 mm Tolerance ±0.002 mm Reliable reference for repeatable measurements A short, solid inspection pin offers a stable reference that reduces measurement variation. Manufactured in special steel and finished to tight tolerances, this pin provides a reproducible datum for end‑measure verification and reference fitting. The combination of Ø 10.3 mm and a 50 mm nominal length yields a compact geometry that resists bending during handling, so routine checks and set‑ups remain fast and consistent. The specified ±0.002 mm variation reflects manufacturing control that supports medium‑to‑high precision workshop tasks without the need for elaborate fixturing. Built for daily workshop use and handling comfort The workshop design emphasises durability and straightforward handling. The compact length and mass create a low moment of inertia during manual placement, improving ease of use on benches and in gauging fixtures. The special steel construction resists abrasion from repeated insertion into tapped bores or alignment jigs, and the single‑piece supply simplifies inventory for line inspection. Traceable identification (GTIN available) allows this inspection pin to be integrated into stock and process documentation, ensuring consistent reuse across batches and operators. Practical integration into inspection processes As a single‑item inspection tool, the pin is suited to quick go/no‑go fits, alignment aids and end‑measure spot checks in production and quality control. Its compact dimensions make it useful where space is limited or where multiple pins are kept at the inspection station for rapid changeover. Using such a fixed‑diameter reference reduces setup time and helps standardise measurement routines, which in turn supports reproducible quality outcomes and fewer measurement‑related stoppages on the shop floor. For workshop‑grade precision and reliable reference performance, contact Metav Werkzeuge for availability and technical advice on the Metav IndustryLine gauge pin Technical data SKU: M323.A30 GTIN: 4061905064272 Brand: Metav IndustryLine Article: Gauge pin, single, Ø 10.3 mm × 50 mm Facts Diameter: 10.3 mm Length: 50 mm Mass: 0.1 kg Manufacturing tolerance: ±0.002 mm Special features Material: special steel Workshop version Single item supply FAQ What tolerance can be expected from this gauge pin? The gauge pin is produced with a manufacturing tolerance of ±0.002 mm, suitable for repeatable workshop reference measurements and quality checks. Which materials is the pin appropriate for when used as a reference in gauging operations? The Metav IndustryLine gauge pin is made from special steel and is intended as a dimensional reference; it is suitable for use with workpieces of common workshop materials during alignment and fit checks. Is this pin supplied individually or as a set? This item is supplied as a single inspection pin (SKU M323.A30) for straightforward integration into existing gauging stations. Can the pin be used for end‑measure verification on small components? Yes, the compact 50 mm length and precise Ø 10.3 mm diameter make it well suited to end‑measure verification and reference fits on small to medium components. How does the gauge pin support faster inspection routines? A fixed‑diameter reference reduces setup and alignment time, enabling quicker go/no‑go checks and repeatable positioning, which streamlines routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.41mm Gauge Pin Length 50mm Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of ±0.002 mm manufacturing accuracy, robust special steel construction and a compact 50 mm length to ensure repeatable end‑measure checks and fixture alignment; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 10.41 mm diameter – 50 mm length (Metav IndustryLine) The gauge pin, single, 10.41 mm, length 50 mm is a workshop‑grade reference pin designed for precise end‑measure verification and fixture positioning in production and inspection environments Workshop-grade precision ±0.002 mm tolerance Solid special-steel construction for durability Reference diameter precisely 10.41 mm Compact 50 mm length for fixture and end-position checks Consistent reference measurements for faster setup Manufactured to a tight ±0.002 mm tolerance, this precision gauge pin provides a stable reference for repeatable measurements and quick fixture set‑up. The nominal 10.41 mm diameter is produced under controlled conditions to reduce runout and assure interchangeability in jigs and checking fixtures, which shortens process stabilisation time and lowers scrap rates. The compact form factor keeps handling simple while maintaining the rigidity required for reliable contact measurement. Practical workshop use and application scenarios Built as a workshop‑grade reference pin, the component suits everyday tasks: end‑position checks, datum establishment, alignment of mating parts and use as a reference in assembly aids. The short 50 mm length gives good access in confined set‑ups without sacrificing control during placement. Thanks to its balanced mass (approx. 0.1 kg), it is easy to handle for manual inspection routines and small series production where quick checks are frequent and traceable results are required. Durable construction and traceable identification The pin is made from special steel, selected for wear resistance and dimensional stability under typical shop conditions, which extends service life and reduces rework. Supplied as a single, standalone reference item (SKU M323.A41), this workshop execution component integrates seamlessly into existing quality workflows. Choosing Metav IndustryLine products also means benefiting from Metav’s quality filter in Emmerich, which supports reliable European distribution and consistent product verification. Secure workshop-ready gauge pins from Metav Werkzeuge for reliable end-measure checks — contact our advisors for application guidance on M323.A41 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.A41 GTIN: 4061905065446 Manufacturer: Metav IndustryLine Facts Diameter: 10.41 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Single gauge pin, workshop execution Category: Gauge pins SKU: M323.A41 FAQ What is the manufacturing tolerance of this gauge pin? The gauge pin is produced to a tolerance of ±0.002 mm, making it suitable for repeatable reference checks and precision workshop measurements. Which material is used for the pin and what does it mean for durability? This M323.A41 pin is made from special steel, chosen for wear resistance and dimensional stability under regular workshop conditions. For which applications is this reference pin intended? Typical uses include end‑position verification, datum and fixture alignment, alignment of mating parts and quick pass/fail checks in production. Is the product supplied as a single item or as part of a set? The article is supplied as a single gauge pin (single item) under SKU M323.A41, intended for individual reference or to complement existing gauge assortments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.42mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of precision to ±0.002 mm, robust workshop construction and compact handling for reliable end‑measure inspections; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A42 — single test pin, 10.42 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.A42 is a single precision test pin designed for end‑measure checks and fit verification in workshop and inspection environments. Diameter 10.42 mm tolerance ±0.002 Workshop version, length 50 mm Made from special steel Supplied in a protective transport case Consistent accuracy for repeatable end‑measure checks The M323.A42 delivers a declared accuracy of ±0.002 mm, which translates into trustworthy repeatability for go/no‑go assessments and assembly checks. Such a tolerance is suitable where close fits and tight clearances are involved; the low variation reduces measurement scatter and provides a reliable reference for quality control and setting gauges. The compact mass and short shank keep thermal and handling effects minimal, supporting stable readings during routine shop inspection. Built for the workshop — robust material and easy handling Constructed from special steel, this test pin resists wear and keeps a stable profile across repeated use, making it appropriate for benchwork and production checks. The 50 mm length and 10.42 mm diameter balance accessibility and rigidity, while the workshop specification emphasises a design that tolerates everyday handling. At approximately 0.1 kg, it is simple to position and manoeuvre, and the supply in a protective transport case reduces risk during storage and transit, preserving the reference surface between uses. Practical uses and integration into inspection routines As a precision end‑measure component, the gauge pin is suited to bore verification, pin fit checks, fixture setting and dimensional reference tasks in metalworking and assembly. The slender geometry enables access into tight locations while the defined tolerance supports comparative measurements against micrometre or caliper checks. For documentation and traceability, note the article reference M323.A42 when specifying replacements or creating inspection records; further technical questions and application advice can be provided by the Metav team to ensure correct selection for specific measuring chains. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and fast dispatch to integrate the M323.A42 into inspection routines. Technical data Article number: M323.A42 GTIN: 4061905066177 SKU: M323.A42 Weight: 0.1 kg Numerical data Diameter: 10.42 mm Length: 50 mm Tolerance: ±0.002 mm Special features Workshop version Material: Special steel Supplied in protective transport case Category: Gauge pins FAQ What is the declared tolerance of this gauge pin? The M323.A42 gauge pin is specified with a tolerance of ±0.002 mm, suitable for tight fit and end‑measure checks. Which material is used for the pin? The pin is made from special steel, selected for wear resistance and dimensional stability in workshop use. Is the pin suitable for bore and fit checks in production? Yes — the geometry and accuracy of this test pin make it suitable for bore verification, fit testing and fixture set‑up in metalworking environments. How should the gauge pin be stored between uses? Store the pin in its protective transport case to avoid nicks or contamination on the measuring surface and to preserve accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com