Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M5x0.35 Thread Gauge, Right-Hand ISO Fine Thread, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Precise pass/fail control for fine metric threads is provided by the combination of a hardened gauge steel body, conformity to DIN 13 with tolerance class 6g, and the compact, repeatable geometry of the ring. The lightweight design (approx. 0.01 kg) supports rapid verification on the shop floor. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M5 x 0.35 mm 'go' — Metric ISO fine-thread ring gauge, hardened gauge steel, Metav IndustryLine The Thread ring gauge M5 x 0.35 mm 'go' is a right‑hand metric ISO fine‑thread ring gauge intended for quick pass/fail checks in inspection benches and production lines. M5 x 0.35 metric ISO fine-thread check Hardened gauge steel for long service life Conforms to DIN 13 tolerance class 6g Repeatable pass/fail inspection for fine threads The ring serves as a direct, tactile verification tool: a part that passes the go gauge meets the specified internal thread form for M5 x 0.35 metric ISO fine threads. Built from hardened gauge steel, the ring maintains its measuring contour under frequent use and resists wear that would otherwise compromise repeatability. Conformity with DIN 13 and tolerance class 6g gives a clear, industry‑standard reference for acceptance criteria; this reduces uncertainty in go/no‑go decisions and supports a stable production flow with fewer retests. Robust construction and ergonomic handling for workshop use At approximately 0.01 kg, the component is compact yet rigid, enabling fast manual checks without operator fatigue. The hardened material and precise bore geometry mean reduced maintenance intervals and predictable lifetime performance in serial inspection tasks. The right‑hand orientation and metric fine pitch are optimised for typical machine‑built assemblies, allowing the gauge to be used directly at the workbench or in a dedicated inspection fixture for consistent results and minimal setup time. Fits into quality workflows and traceability systems Designed as a simple, reliable inspection artefact, the gauge integrates well with documented quality procedures. Using a dedicated ring gauge for pass/fail decisions shortens inspection cycles and lowers scrap by catching deviations early. The compact format is convenient for storage on inspection trolleys or in tool cabinets; its clear designation as a go gauge helps prevent misuse. For procurement and inventory control, the item is available under SKU M315.105.1 and GTIN 4054469123769, supporting traceability and stock management. Contact Metav Werkzeuge for specification support or to request the Metav IndustryLine ring gauge from our Emmerich stock. Technical data Article number: M315.105.1 GTIN: 4054469123769 Weight: 0.01 kg Thread: M5 x 0.35 mm Material: gauge steel, hardened Standard: DIN 13 Tolerance class: 6g Right-hand thread Facts Nominal size: M5 Pitch: 0.35 mm Weight (numeric): 0.01 kg Customs tariff number: 90173000 Special features 'Go' (pass) thread ring gauge Intended for metric ISO fine threads Durable hardened measuring surface Category: thread gauges / inspection gauges FAQ What does the 'go' designation mean for this ring gauge? The 'go' designation means the ring gauge is used for acceptance: a component that fits the Thread ring gauge M5 x 0.35 mm 'go' meets the minimum internal thread requirements defined by the gauge and DIN 13. Can this gauge be used on production machines or only in the inspection room? The M5 x 0.35 ring gauge is designed for both quick shop‑floor checks and formal inspection benches; its hardened construction allows frequent use near production lines without rapid wear. What material is the gauge made from and how does that affect longevity? The gauge is manufactured from hardened gauge steel, providing wear resistance and stable geometry so the inspection limit remains reliable over many cycles. Is the tolerance class indicated on the gauge compliant with standard thread specifications? Yes, the ring corresponds to DIN 13 and tolerance class 6g, which is a standard acceptance class for metric ISO internal threads. Which SKU should be ordered for this item? Order under SKU M315.105.1; the same item is listed with GTIN 4054469123769 for procurement and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5x0.8 Thread Limit Plug Gauge For Metric ISO Regular Thread Right-Hand, DIN 13 6H - Metav IndustryLine
Take advantage of a compact limit thread plug that combines hardened gauge steel robustness with the conformity of DIN 13, 6H for fast, reproducible go/no-go checks on metric ISO threads. The gauge's M5 x 0.8 right‑hand specification ensures immediate acceptance testing in production and inspection. Order the limit thread plug directly via (Metav Werkzeuge) or ask our consultants if needed Limit thread plug gauge M5 x 0.8 (right‑hand) — hardened gauge steel, DIN 13, 6H — Metav IndustryLine The Limit thread plug gauge M5 x 0.8 is a right‑hand metric ISO regular‑thread limit plug designed for swift go/no‑go verification in shop‑floor and laboratory inspection routines Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Right‑hand metric ISO thread M5×0.8 Fast, reliable in‑process verification that reduces rework This limit plug delivers immediate, unambiguous pass/fail results for threaded parts, shortening inspection cycles and reducing downstream rework. Built to the DIN 13 profile with 6H tolerance, the gauge provides a clear acceptance criterion for metric ISO threads; the M5 x 0.8 size is standard for many assemblies and fasteners. As a simple Go/No‑Go reference, it helps maintain production throughput by enabling operators to perform repeatable checks without complex measuring equipment. The compact form factor supports quick handling and rapid station‑to‑station checks. Durable construction for repeated use and stable reference values Manufactured from hardened gauge steel, the tool resists wear and keeps thread form integrity longer than untreated equivalents. Heat treatment and finishing preserve the mating geometry so that the gauge remains a stable reference during serial inspections. Reduced wear translates into fewer gauge replacements and predictable maintenance intervals, supporting a lower total cost of ownership in continuous production environments. Traceability is straightforward thanks to the clear specification, which aids in audit trails and quality documentation. Easy integration into quality workflows and inventory control The plug gauge fits neatly into standard inspection procedures as a first‑line control for incoming parts, post‑machining checks, or final assembly verification. Its small mass and simple handling speed up throughput on the inspection bench and complement optical or tactile measurement when a quick decision is required. The clear conformity to established standards facilitates procurement, storage and replacement planning within a quality system, and supports communication across procurement, production and quality assurance teams. For expert advice on using Metav IndustryLine limit gauges and fast delivery options, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.005 GTIN: 4054469122083 Category: Lehren; Messstifte Facts Size: M5 x 0.8 Weight: 0.02 kg Tariff number: 90173000 ECLASS: 21170235 Special features Material: gauge steel, hardened Standard: DIN 13, tolerance 6H Thread direction: right‑hand Good condition: yes FAQ What does the M5 x 0.8 designation mean for this gauge? The M5 x 0.8 designation denotes a metric ISO thread with a 5 mm nominal diameter and 0.8 mm pitch; the limit thread plug gauge M5 x 0.8 checks conformity to that specification. Is this gauge suited for production use or only for laboratory inspection? The Metav IndustryLine limit plug is intended for both shop‑floor production checks and laboratory inspection as a quick Go/No‑Go reference for thread form. Does the plug gauge comply with recognised standards? Yes, the tool is manufactured to the DIN 13 profile with a 6H tolerance class to match metric ISO thread acceptance criteria. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5×0.35 Limit Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a standard-compliant verification tool that combines DIN 13, 6H accuracy with hardened gauge steel durability to keep inspection cycles short and reproducible; order the limit thread plug gauge directly via Metav Werkzeuge or consult our team for technical guidance. Limit thread plug gauge M5 x 0.35 mm – metric ISO fine thread, right-hand (Metav IndustryLine) The Limit thread plug gauge M5 x 0.35 mm is a compact precision tool for verified thread assessment in production and incoming inspection, designed for metric ISO fine threads and right-hand applications DIN 13, 6H specification Hardened gauge steel construction Suitable for M5 x 0.35 metric fine thread Fast, standards-based verification for small threads A limit plug gauge delivers an immediate go/no-go decision at the workbench or inspection bench. Built to DIN 13, 6H, this gauge checks compliance with the metric ISO fine-thread form and tolerance so that non-conforming parts are identified without time-consuming measurements. The combination of a clearly defined nominal size and a tactile pass/fail result reduces measurement ambiguity, which speeds up throughput on repetitive checks and simplifies sampling plans in production environments. The M5 x 0.35 mm sizing makes it ideal for small fasteners and fine-threaded components often encountered in electronics assemblies and precision sub‑assemblies. Durable construction for repeatable results Made from hardened gauge steel, the tool resists wear and retains dimensional stability under typical workshop use. This material choice means fewer replacements and consistent performance over many insertion cycles, supporting reproducible inspection results. The compact mass contributes to simple handling and quick use in tight fixtures or ergonomic jigs. Where traceability and repeatability matter, a robust material and an established tolerance class such as 6H provide confidence that the gauge will perform reliably throughout routine quality checks. Integrating the gauge into quality workflows The limit gauge functions as a focused instrument in a broader quality assurance strategy: use it for spot checks, batch verification or as a final acceptance control before assembly. By replacing slower measurement methods for simple pass/fail decisions, inspection personnel can allocate metrology resources more efficiently. Documenting the use of calibrated gauges in inspection protocols contributes to audit readiness and consistent supplier control. With the practical benefits of immediate feedback and long service life, this gauge supports smoother production flows and fewer surprises on the line. Choose Metav IndustryLine quality for dependable thread verification and contact Metav Werkzeuge in Emmerich for ordering or specification advice to match inspection processes exactly Technical data SKU: M315.005.1 GTIN: 4054469122090 Size: M5 x 0.35 mm Weight: 0.01 kg Thread direction: right-hand Core data Nominal diameter: M5 Pitch: 0.35 mm Standard / tolerance class: DIN 13, 6H Tariff code: 90173000 Special features Material: gauge steel, hardened Application: metric ISO fine-thread inspection Product type: limit thread plug gauge Category: gauges / inspection tools FAQ What is this gauge used for? This limit thread plug gauge checks whether threads meet the form and tolerance for M5 x 0.35 mm metric ISO fine threads, providing a clear go/no-go result for quality control. Which standard does the gauge comply with? The gauge is manufactured to DIN 13, 6H, ensuring compatibility with standardised metric ISO fine-thread tolerances. What material is the gauge made from? The gauge is made from hardened gauge steel, chosen to provide durability and stable dimensions under repeated use. Can this gauge be used for production line checks? Yes, the gauge is intended for rapid verification in production and incoming inspection, supporting efficient pass/fail decisions during assembly operations. How should inspection results be recorded? Record go/no-go outcomes in the production lot documentation or quality inspection sheets; referencing the M315.005.1 SKU helps maintain traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5×0.5 Thread Limit Go Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
The provided product dataset contains contradictory status information: the item is simultaneously flagged as rejected and as acceptable. This inconsistency prevents the generation of a reliable product description and risks publishing incorrect specifications or compliance statements. Please verify and correct the source data so that a clear product status and confirmed technical fields are available; include any relevant calibration or standardisation details when applicable. Once the dataset has been reconciled, a complete, standards-compliant description in British English can be prepared, detailing material, norm conformity and intended use. If assistance is required to resolve the discrepancy or to clarify any technical entries, Metav Werkzeuge can be contacted for support at info@metav-werkzeuge.com or by telephone on +49 2822 7131930.
M5×0.75 Thread Limit Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Conflicting product data detected: quality/status indicators are inconsistent (the item is marked both as scrap and as acceptable). This discrepancy creates confusion and prevents the generation of a reliable product description. Without accurate and consistent status information, it is impossible to ensure the integrity of the product specification or marketing text. To resolve this issue, please review and correct the source information to eliminate the contradiction. Once the status is aligned and consistent, a complete, compliant specification and marketing text will be created, ensuring clarity and reliability for all stakeholders involved.
M5×0.8 Thread Go Ring Gauge, DIN 13 6g, Right-Handed, Hardened Gauge Steel - Metav IndustryLine
Take advantage of reliable, rapid acceptance checks thanks to the combination of DIN 13 tolerance class 6g, hardened gauge steel construction and a very light, compact form factor for easy handling during production sampling. Order the Go thread ring gauge directly via Metav Werkzeuge or consult our advisors for application support. Go thread ring gauge M5 x 0.8 — acceptance ring, right-hand, DIN 13 The Go thread ring gauge M5 x 0.8 is a compact acceptance gauge for quick verification of metric ISO threads in workshop and production environments M5 x 0.8 metric thread gauge DIN 13 tolerance class 6g Hardened gauge steel for durability Right-hand Go ring for fast inspection Fast conformity checks that save production time A dedicated Go ring gauge enables immediate go/no-go decisions at the machine or inspection table, shortening throughput times and reducing bottlenecks. The compact design and low mass make the tool easy to handle during repeated checks, while the defined DIN 13 tolerance class 6g ensures that the measured threads conform to the accepted metric ISO form. This focused functionality translates into fewer stoppages and a more efficient sampling routine for batch testing. Durability and traceable standards for repeatable results Constructed from hardened gauge steel, the acceptance ring resists wear from repeated engagement with threaded parts, extending service life and maintaining dimensional integrity. Compliance with the DIN 13 specification provides a recognised reference that aligns with standard production tolerances; the steel hardening minimises profile distortion so that acceptance checks remain consistent over time. The result is dependable, repeatable verification that supports quality control procedures. Practical integration into inspection workflows Lightweight and straightforward to use, the ring gauge slips directly onto an M5 × 0.8 thread for a rapid check of form and fit; if the ring engages smoothly, the thread is accepted within the 6g class. Its right-hand orientation matches standard metric fasteners and simplifies handling on assembly lines. For traceability and process documentation, the gauge’s clear specification (thread size, pitch and tolerance class) makes it easy to record inspection outcomes in production logs and quality reports. For robust, shop-floor thread verification choose the Metav IndustryLine Go ring gauge and contact Metav Werkzeuge for purchasing or technical advice — Metav’s specialists in Emmerich are available to support selection and application Technical data Article number: M315.105 GTIN: 4054469123752 Label: Go thread ring gauge M5 x 0.8, DIN 13, right-hand Material: hardened gauge steel Standard: DIN 13, 6g Weight: 0.01 kg Facts Nominal diameter: 5 mm Pitch: 0.8 mm Weight: 0.01 kg Tariff number: 90173000 Special features Go ring gauge for acceptance testing Right-hand metric ISO thread check Hardened gauge steel for wear resistance Compact form for repetitive shop-floor use FAQ What tolerance class is this gauge made to? The gauge is manufactured to DIN 13 with tolerance class 6g, suitable for standard metric ISO thread verification using the Metav IndustryLine Go thread ring gauge M5 x 0.8 (SKU M315.105). Is this a Go or a No-Go gauge? This item is a Go ring gauge intended for acceptance testing; a smooth engagement indicates the thread meets the acceptance criteria for M5 × 0.8 within class 6g. What material is the ring gauge made from? The ring is made of hardened gauge steel, chosen to resist wear and maintain measurement reliability during repeated use. Which thread direction does the gauge check? The ring is for right-hand metric threads, matching the common orientation of ISO metric fasteners. How is the gauge used in production checks? The gauge fits directly onto the thread; successful engagement confirms conformity to the specified M5 × 0.8 geometry and 6g tolerance, allowing fast go/no-go decisions for process control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6 x 0.35 Thread Go Gauge, DIN 13 6g, Right-Hand, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a compact inspection tool that combines DIN 13 conformity, hardened gauge steel and an exact M6 x 0.35 mm pitch for reliable thread verification on the shop floor — order directly via Metav Werkzeuge or consult the Metav team for application advice. Thread ring gauge M6 x 0.35 mm (DIN 13, 6g) — Metav IndustryLine The Thread ring gauge M6 x 0.35 mm is a hardened inspection gauge for fast and repeatable verification of metric ISO fine threads in production and quality control environments Hardened gauge steel for extended service life DIN 13 conformity, tolerance class 6g For M6 x 0.35 mm metric fine threads Right-hand thread verification tool Ensured conformity for batch inspection and interchangeability A compact thread ring gauge designed to verify the pitch and form of metric fine threads, the gauge conforms to DIN 13 with tolerance class 6g, which ensures parts produced or received meet established dimensional standards. Using a gauge that matches the nominal size M6 x 0.35 mm reduces uncertainty in pass/fail decisions and supports fast in‑line or at‑bench checks. The clear normative reference and repeatable fit prevent costly rework and maintain interchangeability across assemblies. Robust construction for persistent accuracy Manufactured from hardened gauge steel, this ring gauge resists wear from routine use, preserving its measuring surface and maintaining a consistent feel over time. At approximately 0.01 kg it is easy to handle and manoeuvre during inspection cycles, yet its hardened material provides the surface integrity required for regular gauging. The right‑hand thread orientation matches standard threaded components and aids rapid verification without additional fixturing, increasing throughput in quality‑control workflows. Traceability and practical integration into quality systems The gauge is supplied with clear identification (SKU M315.206.1) and a GTIN reference for inventory control, enabling straightforward traceability within a quality management system. In production, the tool serves as a quick go/no‑go check for incoming parts, in‑process controls and final inspection. The compact form and normative compliance make it suitable for toolroom, maintenance and small‑batch manufacturing where reliable thread checking prevents assembly issues and supports a smoother production flow. Metav IndustryLine’s selection reinforces availability and a consistent quality filter for the European market. For reliable metric thread inspection choose the Metav IndustryLine ring gauge and contact Metav Werkzeuge for tailored application advice or ordering assistance — info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M315.206.1 GTIN: 4054469125473 eClass: 21170214 Customs tariff number: 90173000 Numbers / Core technical data Thread size: M6 x 0.35 mm Tolerance class: 6g (DIN 13) Weight: 0.01 kg Special features / Versions Material: hardened gauge steel Right‑hand thread Category: gauges / inspection rings Suitable for metric ISO fine threads FAQ What standard does this ring gauge follow? The ring gauge follows DIN 13 with tolerance class 6g, ensuring compatibility with metric ISO fine‑thread specifications. Is the gauge suitable for routine shop‑floor inspection? Yes, the hardened construction and compact form make the gauge from Metav IndustryLine suitable for regular bench and in‑process checks. What size and pitch does the gauge verify? This tool verifies M6 x 0.35 mm metric fine threads and is intended for right‑hand threaded parts. How is the product identified for inventory and traceability? Identification is provided by SKU M315.206.1 and GTIN 4054469125473 for straightforward tracking within quality systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6 x 0.5 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13, 6g - Metav IndustryLine
Take advantage of the combination of reliable production control, hardened gauge steel construction and DIN 13 tolerance for reproducible thread acceptance; order the thread ring gauge directly via Metav Werkzeuge or consult our advisers for batch inspection planning. Thread Ring Gauge M6 × 0.5 mm — Hardened Gauge Steel, DIN 13 (Metav IndustryLine) The Thread Ring Gauge M6 × 0.5 is a hardened gauge-steel ring for rapid acceptance testing of right‑hand ISO metric fine external threads in production and quality control. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M6 × 0.5 ISO metric fine threads Compact mass 0.04 kg Reliable pass/fail control for threaded parts A hardened ring gauge provides a fast, unequivocal check of external threads: the part either fits or it does not. Built to DIN 13 with tolerance 6g, this gauge establishes a clear acceptance criterion for M6 × 0.5 threads, reducing ambiguity during visual inspection and cutting down on measurement time. Using a dedicated gauge stabilises process capability and helps to avoid costly rework by catching out‑of‑tolerance items at the first inspection stage. Durable construction for long service life Manufactured from hardened gauge steel, the device resists wear under repeated engagement and maintains dimensional stability, supporting consistent results over many cycles. The compact mass of 0.04 kg and the ring geometry ensure low handling effort and minimal transport strain between workbench and inspection station. This robustness translates into fewer replacements and predictable maintenance intervals, which is particularly advantageous for high‑volume production of fasteners or shafts. Simple integration into production workflows Designed for immediate use on the shop floor, the ring gauge enables quick go/no‑go decisions without specialised measuring equipment. Its right‑hand configuration suits standard metric assemblies and is ideal for line inspection of bolts, studs and turned parts with ISO metric fine threads. The clear mechanical check complements more detailed measurement systems and supports a lean quality routine that enhances throughput without compromising traceability. For secure thread control using Metav IndustryLine’s hardened gauge‑steel ring gauge, contact Metav Werkzeuge for availability and specification advice Technical Data SKU: M315.206.2 GTIN: 4054469125480 Thread: M6 × 0.5 mm Mass: 0.04 kg Material: Gauge steel, hardened Standard: DIN 13, 6g Tariff number: 90173000 Core Data Thread pitch: 0.5 mm Tolerance class: 6g Right‑hand thread Category: Gauges — ring gauge for external threads Special features For ISO metric fine threads Compact and lightweight for handheld inspections Hardened for wear resistance Suitable for production and quality control FAQ What is this gauge used for? The thread ring gauge M6 × 0.5 (Metav IndustryLine, SKU M315.206.2) is used to check the acceptability of external ISO metric fine threads by a simple go/no‑go fit. Which parts are checked with this ring gauge? Male threaded parts such as bolts, studs and turned shafts with M6 × 0.5 external threads are inspected using this ring gauge to confirm conformity with DIN 13, tolerance 6g. Does the gauge indicate positional or form errors? The ring gauge provides a functional pass/fail check for thread form and major dimensional compliance; it is not a substitute for full dimensional analysis when position or microscopic form deviations require evaluation. Can this gauge be used for left‑hand threads? No, this particular ring gauge is for right‑hand ISO metric threads; left‑hand versions must be specified separately. How does the hardened material benefit production use? Hardened gauge steel on this ring gauge reduces wear during repeated checks and preserves the acceptance limits, ensuring consistent inspection results across many cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6 x 0.75 Thread Ring Gauge Go, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge that ensures rapid, repeatable checks of metric fine threads while complying with DIN 13 tolerance class 6g; order the part directly via Metav Werkzeuge or consult the technical advisors for procurement details. Thread Ring Gauge M6 x 0.75 mm (DIN 13, 6g) – Metav IndustryLine The Thread Ring Gauge M6 x 0.75 mm is a hardened ring gauge for rapid verification of metric ISO fine external threads in production and quality assurance environments. Hardened gauge steel, high wear resistance Metric ISO fine thread M6 x 0.75 Tolerance class DIN 13, 6g Right‑hand thread, quick conformity check Efficient, standard‑compliant inspection for production lines A compact ring gauge delivers a straightforward pass/fail control that saves time on the shop floor and reduces downstream assembly faults. The device is designed to check external metric ISO fine threads — M6 x 0.75 — against the DIN 13 specification with a 6g tolerance class, enabling fast conformity decisions during incoming inspection or in-process control. By using a hardened verification tool, production cycles are kept short while maintaining a documented standard reference for thread acceptance, which supports traceable quality routines and minimises rework. Durable construction for reliable long‑term use Manufactured from hardened gauge steel, this ring gauge resists wear and maintains dimensional stability under frequent use. The material choice and heat treatment deliver wear resistance and a consistent tactile fit when checking mating parts, extending the service interval between maintenance actions. At a nominal mass of 0.04 kg, the gauge is lightweight for handheld handling yet sufficiently robust for repetitive use on the workshop bench or in the inspection area. The right‑hand thread geometry reflects standard assembly practice for metric ISO fine threads, ensuring that the check mirrors actual service conditions. Practical integration into workshop and QA processes The ring gauge is compact and immediately usable within established inspection workflows. Its simple form factor supports fast operator training and easy visual identification of the check criterion. For tooling lists and inventory management, the part is identified by SKU M315.206.3 and GTIN 4054469125497, which aids procurement and traceability across supply chains. Using a standardised ring gauge reduces measurement variability compared with ad‑hoc methods and helps maintain production quality by offering a reliable mechanical reference for thread conformity. Contact Metav Werkzeuge for ordering and technical clarification on Metav IndustryLine thread gauges; our Emmerich-based team will assist with specification matching and delivery logistics. Technical Data Article number: M315.206.3 GTIN: 4054469125497 Tariff number: 90173000 Core specifications Thread: M6 x 0.75 mm Tolerance class: 6g Standard: DIN 13 Weight: 0.04 kg Materials & features Material: Gauge steel, hardened Thread direction: Right-hand Categories: Gauges; Measuring pins FAQ What is the primary use of this ring gauge? The thread ring gauge is intended for quick verification of external metric ISO fine threads, specifically M6 x 0.75 mm, ensuring parts meet DIN 13, tolerance class 6g. Which tolerance and standard are checked with this gauge? Checks are performed to DIN 13 with tolerance class 6g, suitable for standardised metric ISO fine thread verification. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for its durability and resistance to wear, which preserves the reference geometry under repeated use. Is the thread direction specified? Yes, the gauge features a right‑hand thread corresponding to standard metric assembly practices. How is the item identified for procurement and traceability? The product is listed under SKU M315.206.3 and GTIN 4054469125497 for ordering and inventory control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6 x 0.75 Thread Ring Gauge, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Reliable Go ring for M6 x 0.75 threads in hardened gauge steel and manufactured to DIN 13, 6g, ensuring consistent acceptance checks and fewer production rejects. Order the gauge directly via Metav Werkzeuge or consult our specialists for compatibility with inspection routines. Thread ring gauge M6 x 0.75 (Go) — Metric ISO fine‑thread inspection gauge, DIN 13, Metav IndustryLine The Thread ring gauge M6 x 0.75 (Go) is a right‑hand, metric ISO fine‑thread acceptance gauge intended for routine production checks and quality control in metalworking and assembly environments. Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g Designed for M6 x 0.75 metric fine thread Right‑hand Go (acceptance) thread ring Ensure conformity with a simple Go/No‑Go check A Go ring gauge provides an immediate, objective decision: threads that accept the gauge meet the DIN 13 acceptance limits for the specified tolerance class. By specifying 6g, the gauge is matched to common manufacturing tolerances for external threads; using a dedicated acceptance ring for M6 x 0.75 eliminates guesswork at the bench and reduces subjective inspection time. The clear pass/fail nature of a ring gauge shortens inspection cycles and lowers scrap rates, supporting uninterrupted production flow through fast, reproducible checks. Durable construction for long service life and repeatability Manufactured from hardened gauge steel, the ring resists wear and maintains dimensional stability under repeated use. This material choice translates directly into fewer instrument changes and more predictable maintenance intervals. The compact design and low mass (0.05 kg) make the gauge straightforward to handle in serial inspection and on the shop floor. Traceability is supported by the internal article reference, while the robustness of the construction preserves the Go condition over extended inspection campaigns, protecting process capability and assuring repeatable results. Practical integration into workshop inspection routines The acceptance ring is intended for rapid verification of right‑hand, metric ISO fine external threads during in‑process or final inspection. Fit the ring onto the component and verify smooth assembly to confirm compliance; a quick check is often sufficient to release small batches or signal the need for adjustment in a machining process. Where a documented record is required, the ring can be used alongside torque‑controlled assembly and sampling plans to form a compact, effective quality control method. Compatibility with standard thread handling procedures keeps inspection simple and efficient. For reliable thread verification and consistent production quality, choose the Metav IndustryLine ring gauge and contact Metav Werkzeuge for expert advice and procurement assistance. Technical Data Article number: M315.106.3 GTIN: 4054469123820 Thread: M6 x 0.75 Type: Go (acceptance) ring gauge Direction: Right‑hand thread Material: hardened gauge steel Standard: DIN 13, 6g Weight: 0.05 kg Customs tariff number: 90173000 Numbers / Core technical data Nominal diameter: M6 Pitch: 0.75 mm Tolerance class: 6g Mass: 0.05 kg Article number: M315.106.3 Special features / Versions Go (acceptance) type for quick pass/fail checks Right‑hand metric ISO fine thread application Hardened gauge steel for wear resistance Category: Gauges / Thread gauges FAQ What thread size and pitch does the gauge check? The Thread ring gauge M6 x 0.75 (Go) inspects external threads with a nominal diameter M6 and a pitch of 0.75 mm, matching metric ISO fine‑thread specifications. What does "Go" mean for this ring gauge? A "Go" ring indicates acceptance: if the external thread accepts the ring without excessive force, the thread meets the DIN 13, 6g acceptance limits for the specified class. Is the gauge suitable for production use on the shop floor? Yes; the Metav IndustryLine Go ring gauge is designed for routine production checks and durable enough for frequent use in workshop inspection processes. What material is the gauge made from and why is that important? The gauge is made from hardened gauge steel, which ensures wear resistance and dimensional stability so that the acceptance condition remains reliable over repeated checks. How is the product identified for orders and traceability? Use article number M315.106.3 and GTIN 4054469123820 to specify the Thread ring gauge M6 x 0.75 (Go) from Metav IndustryLine for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6 x 1 mm Go Thread Ring Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of quick, go/no-go acceptance with a hardened gauge steel construction and compliance with DIN 13, 6g for reproducible thread checks; order the M6 x 1 mm Go thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. M6 x 1 mm Go Thread Ring Gauge — Metav IndustryLine M6 x 1 mm Go thread ring gauge for fast go/no-go inspection of metric ISO threads in production and quality control. M6 x 1 mm for metric ISO standard threads Hardened gauge steel, precision ground Conforms to DIN 13, tolerance 6g Fast, reliable go/no-go inspection that saves time A go gauge designed for swift acceptance testing, the M6 x 1 mm Go thread ring gauge verifies thread form and pitch in a single, repeatable action. By providing immediate pass or fail feedback, the ring gauge reduces inspection time and prevents downstream assembly issues. Compliance with DIN 13 and the 6g tolerance ensures that checks align with common engineering standards, making the tool suitable for production lines, incoming inspection and routine shop‑floor control. The compact design minimises handling time while maintaining the necessary functional accuracy for small to medium batch testing. Durable materials and precision finishing for long service life Manufactured from hardened gauge steel and precision ground, the ring gauge resists wear and maintains dimensional stability under repeated use. The hardening process reduces surface deformation so that accuracy endures across many inspection cycles, which lowers rework and replacement frequency. A light overall mass supports quick handling; the robust finish also simplifies cleaning and storage. These material and manufacturing choices translate into predictable measurement behaviour and a lower total cost of ownership in production environments. Practical application in workshop and production settings This right‑hand go ring gauge is intended for metric ISO threads and is especially useful where a clear go/no‑go decision is required without resorting to time‑consuming micrometric checks. The ring gauge is suited to assembly verification, first‑article inspection and spot checks during machining. Its standard conformity to metric ISO practice aids interchangeability between suppliers and production sites. Traceable identification via article number and GTIN supports inventory control and documentation of inspection equipment used for quality records. Contact Metav Werkzeuge to confirm suitability for specific thread series or to request ordering information on the M6 x 1 mm Go thread ring gauge; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.106 GTIN: 4054469123790 Weight: 0.05 kg Thread: M6 x 1 mm Manufacturer: Metav IndustryLine Facts Tolerance: 6g Standard: DIN 13 Tariff number: 90173000 Special features Material: gauge steel, hardened Function: Go (acceptance) ring gauge Thread hand: right‑hand Category: Gauges / Ring gauge FAQ What does a "Go" ring gauge check? A Go ring gauge verifies that an external thread complies with form and size limits for acceptance; the M6 x 1 mm Go thread ring gauge confirms that the thread fits within the permitted envelope. Which standard does this ring gauge follow? The ring gauge is manufactured to DIN 13 with a tolerance of 6g, matching common metric ISO thread specifications for routine inspection. Can the gauge be used for left‑hand threads? No, this ring gauge is a right‑hand Go gauge intended for standard right‑hand metric threads. What benefits does hardened gauge steel provide? Hardened gauge steel ensures wear resistance and dimensional stability, so the M6 x 1 mm Go ring gauge retains accuracy over many inspection cycles. How is the gauge identified for inventory and traceability? Identification is provided by the article number M315.106 and GTIN 4054469123790 for documentation and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6 x 1 mm Thread Go Gauge Right-Hand, Hardened Plug Gauge, DIN 13 6g - Metav IndustryLine
Take advantage of precise thread inspection with a hardened, DIN‑compliant no‑go ring gauge that streamlines quality control and reduces downstream rejects — order directly via Metav Werkzeuge or consult our specialists for production‑matched supply and delivery from Emmerich. Thread ring gauge M6 x 1 mm — no‑go, DIN 13, hardened gauge steel (Metav IndustryLine) The Thread ring gauge M6 x 1 mm is a no‑go ring gauge designed for rapid verification of external metric ISO threads in production and inspection environments DIN 13 compliance for ISO metric threads Hardened gauge steel for long service life No‑go gauge for reliable rejection checks Right‑hand thread for standard assemblies Ensuring consistent rejection where tolerance matters A dedicated no‑go ring gauge is the most direct way to confirm that external threads do not exceed permitted limits. Built to DIN 13 with tolerance class 6g, this gauge verifies whether an M6 thread is within acceptable dimensions: if the no‑go ring engages beyond the prescribed depth, the part is rejected, preventing undersized or damaged components reaching assembly. The method requires minimal interpretation and integrates cleanly into sampling plans, delivering measurable reduction in downstream failures and rework. Robust construction for frequent shop‑floor use Manufactured from hardened gauge steel, the ring gauge stands up to repetitive shop‑floor handling while maintaining the measuring edge quality essential for thread control. The compact ring gauge form factor makes it quick to apply to machined parts, supporting high throughput without elaborate fixturing. The hardened material offers wear resistance that preserves the calibrated boundary between accept and reject, meaning fewer tool changes and predictable life‑cycle costs for inspection tools. Ready for shop routines and traceable inventory Designed as a dedicated verifier for external threads, the gauge is optimised for standard right‑hand metric screws and components, simplifying process documentation and operator instruction. Traceability is supported by the supplied identifiers (GTIN 4054469125466, SKU M315.206), enabling integration into inventory systems and audit records. Use of a purpose‑made no‑go ring gauge reduces subjective judgement in thread inspection and supports consistent quality decisions across shifts and sites. Contact Metav Werkzeuge for tailored supply and delivery options for this M6 no‑go thread ring gauge — stock and technical advice are available from our Emmerich location by phone or e‑mail Technical data Article number: M315.206 GTIN: 4054469125466 Thread size: M6 x 1 mm Standard: DIN 13, tolerance 6g Right‑hand thread Facts Pitch: 1 mm Tolerance class: 6g Tariff number: 90173000 ECLASS: 21170214 Special features Material: Gauge steel, hardened Function: No‑go ring gauge for external threads Application: Metric ISO standard threads Category: Gauges / Ring gauges FAQ What is the primary purpose of this no‑go ring gauge? A no‑go ring gauge is used to check external threads; the thread ring gauge M6 x 1 mm confirms whether a manufactured M6 thread exceeds permitted limits and therefore should be rejected. Which standard and tolerance class does the gauge follow? The gauge is manufactured to DIN 13 and conforms to tolerance class 6g, which is appropriate for metric ISO regular threads in general engineering. What material is the gauge made from and why does that matter? The thread ring gauge M6 x 1 mm is made from hardened gauge steel; this ensures wear resistance and long service life under repetitive inspection cycles. How is the gauge identified for inventory and traceability? Identification is provided via GTIN 4054469125466 and SKU M315.206, enabling the item to be recorded in inventory and quality systems. Can this gauge be used for left‑hand threads? This specific ring gauge is produced for right‑hand threads; left‑hand thread versions must be specified separately when ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60 x 2 mm Go Thread Ring Gauge Metric ISO Fine Pitch Right-Hand DIN 13, 6g - Metav IndustryLine
Take advantage of precise thread verification, robust hardened construction and DIN‑compliant tolerance to reduce inspection time and scrap rates. Order the thread ring gauge directly via Metav Werkzeuge or contact our consultants for application advice. Thread ring gauge M60 x 2 mm — DIN 13, 6g (Metav IndustryLine) The Thread ring gauge M60 x 2 mm is a hardened ring gauge for verification of metric ISO fine threads in right‑hand form, designed for production and final inspection of threaded components. Hardened gauge steel construction DIN 13 tolerance class 6g For metric ISO fine thread M60 x 2 right‑hand Robust 1.3 kg workshop device Conformity and measurement certainty for production control The gauge is engineered to match DIN 13 and the 6g tolerance class, providing an objective pass/fail criterion that simplifies inspection routines and supports consistent quality decisions. As a dedicated thread gauge, it reduces subjective judgement during checks and shortens cycle times in goods‑in and final inspection processes. The standardised specification also facilitates documentation and traceability in quality records, helping to align production with internal control plans and statutory technical standards. Durable construction for repeatable results in the workshop Manufactured from hardened gauge steel, the device resists wear and maintains dimensional stability under regular use, which sustains the gauge’s reliability over time. The compact mass of 1.3 kg and the solid ring form factor ensure stable seating on the threaded parts and minimise the risk of deformation during verification. For maintenance teams and inspectors this means fewer replacements, predictable tool life and a lower total cost of ownership compared with softer measuring tools. Streamlined inspection workflows and reduced rejects Integrating a purpose‑made ring gauge into inspection stations creates an efficient decision point: compliant parts pass with no further rework, non‑conforming parts are identified immediately. The clear mechanical check is particularly effective for high‑volume batches or for components where a quick go/no‑go result speeds throughput. When combined with Metav’s product range and logistics, the gauge supports a pragmatic quality strategy that balances speed, repeatability and regulatory conformity. Contact Metav Werkzeuge to request the M60 thread ring gauge, discuss tolerance requirements or arrange delivery from Emmerich—phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.260.7 SKU: M315.260.7 GTIN: 4054469126937 Customs tariff number: 90173000 Core measurements Thread size: M60 x 2 mm Tolerance class: 6g Standard: DIN 13 Weight: 1.3 kg Features Material: hardened gauge steel For metric ISO fine thread (right‑hand) Category: gauges / measuring devices FAQ What is this gauge used to check? The thread ring gauge M60 x 2 mm is used to verify the dimensional conformity of metric ISO fine threads, offering a simple mechanical pass/fail check for production and inspection workflows. Does the gauge conform to recognised standards? Yes, the ring gauge is manufactured to match DIN 13 with the 6g tolerance class, ensuring compatibility with standard metric ISO fine thread specifications. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so that inspection results remain reproducible over extended use. Is this a go or no‑go gauge? The ring gauge provides an objective mechanical verification for the specified thread size and tolerance; it is used within a go/no‑go inspection routine as defined by the customer’s control plan. What is the article or SKU reference for ordering? Order references include article number M315.260.7 and SKU M315.260.7 for clear identification in procurement and stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60 x 2 mm Go Thread Ring, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 conformity, hardened gauge steel and a compact, stable design for fast, repeatable thread checks on the shop floor; order directly via Metav Werkzeuge or consult the Metav advisors for application guidance. Thread Go Ring Gauge M60 x 2 mm (DIN 13, 6g) — Metav IndustryLine The Thread Go Ring Gauge M60 x 2 mm is a right-hand go gauge for metric ISO fine threads, designed for production inspection and routine quality control of threaded components. Hardened gauge steel, wear-resistant DIN 13 tolerance grade 6g Go ring for M60 x 2 mm fine threads Fast pass/fail inspection for production environments A go ring gauge provides a rapid and objective acceptance check during assembly or final inspection. The combination of the M60 x 2 mm nominal size with the DIN 13, 6g tolerance class allows straightforward verification of internal thread form and pitch without complex measurement setups. Because the device is a dedicated go gauge, dimensional conformity is determined instantly by trial fit, which reduces cycle time and removes ambiguity from routine checks. This makes the gauge particularly well suited to repetitive testing on production lines and inspection benches where speed and reproducibility matter. Robust construction for long service life Manufactured from hardened gauge steel, the ring is engineered to resist wear from repeated use and maintain dimensional stability over time. The material choice and heat treatment contribute to consistent contact geometry and thus reliable pass criteria even after extended service. The solid build and mass (approx. 2.2 kg) also aid stable handling during manual checks, lowering the risk of misalignment that can lead to false rejects. For operations where frequent verification is required, this durability translates directly into lower life‑cycle costs and fewer gauge replacements. Simple integration into quality workflows The gauge is suitable for assembly stations, final inspection rigs and sample testing in quality control labs. Its straightforward go/no‑go principle minimises operator training compared with measuring instruments that require readings and interpretation. When traceability or part identification is necessary, the product’s identifiers (SKU and GTIN) enable direct linking to inspection records and batch documentation, supporting audit trails and process control without adding complexity. Standards conformity builds confidence in results Compliance with DIN 13 and the specified 6g tolerance grade provides clear acceptance criteria aligned with international metric thread standards. The right‑hand orientation and fine pitch specification (2 mm) are explicitly matched to metric ISO fine-thread components, ensuring the gauge is appropriate for typical engineering and maintenance tasks. Using a standardised ring gauge helps maintain consistent quality levels across shifts and between different production sites, supporting broader quality management objectives. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine go ring gauge can be integrated into existing inspection routines and to receive tailored advice from the Emmerich team Technical data Article number: M315.160.7 GTIN: 4054469125275 Label: Thread Go Ring Gauge M60 x 2 mm, right-hand Weight: 2.2 kg Material: gauge steel, hardened Standard: DIN 13, 6g Tariff code: 90173000 Facts Nominal diameter: 60 mm Pitch: 2 mm Tolerance class: 6g Orientation: right-hand thread Category: Thread gauges / Lehren Special features Go (acceptance) ring design Suited for metric ISO fine threads Durable, hardened construction Intended for production inspection and QC FAQ What is the intended use for this ring gauge? The ring is intended for quick pass/fail inspection of internal M60 x 2 mm metric ISO fine threads in production and assembly environments. Does the gauge comply with a recognised standard? Yes, the gauge conforms to DIN 13 with a tolerance class of 6g, allowing clear acceptance criteria for thread checks. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, which provides wear resistance and dimensional stability for prolonged use. Is this a go or no‑go gauge? This item is a go ring gauge, designed to confirm that a thread meets the acceptance size; a corresponding no‑go gauge is used to check the rejection limit. Can this gauge be used on the shop floor for repetitive checks? Yes, the robust construction and simple go/no‑go principle make it suitable for frequent inspection tasks and routine quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x1 Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Precision thread inspection ensured by DIN 13 conformity and hardened gauge steel, giving consistent go/no-go results for fine metric threads. Order the limit thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit thread plug gauge M60×1 – Metric ISO fine thread, right-hand (Metav IndustryLine) A limit thread plug gauge M60×1 designed for fast go/no-go verification of metric ISO fine threads in production and incoming inspection. Metric ISO M60×1 fine thread Conforms to DIN 13 tolerance 6H Hardened gauge steel construction Right-hand go/no-go limit gauge Reliable thread verification for production lines A compact limit gauge for thread control delivers immediate, unambiguous decisions on component conformity. The combination of DIN 13, 6H tolerance and a clear go/no-go design reduces time spent in metrological evaluation and minimises downstream rejects. For repetitive checks the go/no-go principle avoids interpretation errors: passes require no measurement readout, while failures signal the need for rework or sorting, improving throughput in small-batch and series production alike. The instrument is suited to workshop benches and inspection tables where fast, reproducible thread checks preserve process stability. Durable construction that stands up to workshop use Made from hardened gauge steel, the gauge resists wear from frequent engagement and retains thread form accuracy over extended use. The robust material choice reduces the need for frequent replacement and protects dimensional integrity during handling and storage. A solid, ergonomic design supports consistent seating in threaded bores, and the right-hand thread orientation corresponds directly with standard manufactured parts. This durability translates into lower life-cycle costs and predictable inspection intervals for maintenance planning. Clear pass/fail decisions accelerate quality control Designed as a limit gauge for metric ISO fine threads, the plug offers swift verification without complex setup. Inspection staff benefit from a straightforward tactile test: the go end confirms acceptable major and pitch diameters within tolerance, and the no-go end identifies oversize deviations. In a production environment this simplicity supports faster operator training and consistent application of acceptance criteria. The gauge’s M60×1 sizing matches common fine-thread applications in assemblies and components, consolidating inspection kits and streamlining QA workflows. For purchase recommendations or to discuss suitability for specific thread applications, contact Metav Werkzeuge for direct ordering or specialist advice by phone on +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data Article number: M315.060.4 GTIN: 4054469123592 Weight: 1.5 kg Material: Lehrenstahl, hardened Standard: DIN 13, 6H Facts Thread size: M60×1 Direction: right-hand Tariff number: 90173000 eClass: 21170235 Special features Limit (go/no-go) thread plug gauge For metric ISO fine threads Category: gauges; plug gauges FAQ What thread standard does this gauge check? The gauge verifies metric ISO fine threads to the DIN 13 standard with tolerance 6H. Is the gauge suitable for production and incoming inspection? Yes, the limit thread plug gauge M60×1 (Metav IndustryLine, SKU M315.060.4) is designed for rapid go/no-go checks in both production and incoming inspection contexts. What material is the plug gauge made from? The plug is manufactured from hardened gauge steel, chosen for wear resistance and long-term dimensional stability. How is a pass or fail determined with this gauge? A tactile check using the go and no-go ends provides a direct pass/fail result: the go end must engage, the no-go end must not fully engage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x1 Thread Go Ring Gauge Metric ISO Fine Thread Right Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise pass/fail inspection with a hardened gauge steel body and conformity to DIN 13, 6g, ensuring reliable rejection control for metric fine threads; order the gauge directly via Metav Werkzeuge or consult the sales engineers for application guidance. Thread Ring Gauge M60 x 1 mm (No‑Go) — DIN 13, 6g • Metav IndustryLine The Thread Ring Gauge M60 x 1 mm (No‑Go) is a dedicated right‑hand metric ISO fine‑thread reject gauge for production and incoming inspection, designed for robust pass/fail control in industrial environments DIN 13, tolerance 6g for metric threads Hardened gauge steel for long service life Right‑hand M60 x 1 mm no‑go control Article weight 1.3 kg for stable handling Consistent rejection criteria for reliable quality control A no‑go thread ring gauge provides an unambiguous inspection result: if the gauge fits, the thread exceeds the allowed tolerance and the part is rejected. Built from hardened gauge steel, this gauge maintains dimensional stability under repeated use, reducing measurement drift and maintenance cycles. Compliance with DIN 13 and tolerance class 6g gives a clear technical basis for acceptance criteria in quality documentation, supporting consistent decision‑making on the shop floor and in incoming goods checks. Practical function and how it supports production flow The instrument performs a single, focussed function: a binary verification of thread conformity for M60 x 1 mm right‑hand metric threads. This simplifies inspection routines, accelerates throughput and reduces operator ambiguity compared with subjective visual checks. The gauge’s mass (approx. 1.3 kg) contributes to controlled handling during engagement and avoids wobble, while the single‑feature design makes cleaning and storage straightforward. For production planners, the direct result of a no‑go test streamlines sorting and corrective action without complex measurement procedures. Durability, traceability and procurement confidence Manufactured to industrial standards, the ring is intended for repeatable, long‑term use in workshop and production environments. The selection of hardened gauge steel minimises wear and preserves the defined tolerance profile, lowering replacement frequency and lifecycle costs. Supplied by Metav IndustryLine, the gauge is part of a broader offer that emphasises availability and a practical supply chain for precision tools, helping to keep inspection equipment onsite and production moving. For precise thread rejection control with Metav IndustryLine’s hardened M60 no‑go gauge, contact Metav Werkzeuge in Emmerich for product matching, delivery options and technical consultation Technical Data Article number: M315.260.4 GTIN: 4054469126920 Label: Gewinde‑Lehrring M60 x 1 mm Aussch. DIN 13, f. metr. ISO‑Feingewinde, rechts Weight: 1.3 kg Material: Hardened gauge steel Norm: DIN 13, 6g Facts Thread size: M60 x 1 mm Tolerance class: 6g Thread direction: Right‑hand Tariff number: 90173000 Special features No‑go (reject) thread ring gauge Category: Gauges / Thread ring gauge Manufacturer: Metav IndustryLine FAQ What is the intended use of this ring gauge? The ring serves as a no‑go control for right‑hand M60 x 1 mm metric ISO fine threads; the gauge confirms when a thread exceeds the allowed tolerance and must be rejected. Which tolerance standard does the gauge comply with? The gauge is manufactured to DIN 13 and designed for tolerance class 6g, providing a defined technical basis for pass/fail inspection. What material is the gauge made from and why does it matter? Constructed from hardened gauge steel, the gauge resists wear and preserves dimensional accuracy during repeated inspections, extending service life. How does a no‑go ring differ from a measuring instrument? A no‑go ring gives a binary pass/fail result for the specified thread form, whereas a measuring instrument quantifies dimensions; the ring is therefore optimised for rapid production checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x1 Thread Ring Gauge ISO Metric Fine Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a certified industrial standard in threaded inspection: the combination of DIN 13 conformity and hardened gauge steel delivers reliable go/no-go evaluation for external metric fine threads, while the compact design keeps handling and storage simple; order the Go ring gauge directly via Metav Werkzeuge or contact the consultants for application advice. Go ring gauge M60 x 1 mm — Go thread ring gauge (DIN 13, 6g) by Metav IndustryLine The Go ring gauge M60 x 1 mm is a precision inspection gauge for external metric ISO fine threads, designed for production and quality control in metalworking and assembly environments Go ring gauge M60 x 1 mm, DIN 13 Hardened gauge steel construction Tolerance class 6g for ISO metric threads Right-hand thread for standard assemblies Consistent compliance with DIN 13 for traceable inspection The primary function of this inspection ring is to provide a fast, unambiguous go/no-go check against the DIN 13 thread standard. As a Go ring gauge, it confirms whether an external thread falls within the acceptable maximum material condition for an M60 × 1 mm ISO fine thread with tolerance class 6g. This standardised verification reduces interpretation in routine checks and supports consistent production decisions, helping to lower scrap rates and avoid downstream assembly issues. The use of a purpose-made thread ring for external threads ensures direct comparison to the specified geometry without the need for complex measurement setups. Durable construction for repeatable measurements and long service life Manufactured from hardened gauge steel, the gauge is designed to resist wear under repeated use on the shop floor. The material choice and heat treatment contribute to dimensional stability, so the inspection result remains reliable over many cycles. This robustness minimises the frequency of re-grinding or replacement and supports predictable maintenance intervals. A solid, correctly specified ring gauge saves operator time during acceptance testing and contributes to overall process efficiency by providing immediate pass/fail feedback. Practical use in production and inspection workflows The ring’s compact form and clear specification make it suitable for inline checks at the lathe, turning centre or assembly bench. As a right-hand thread gauge for fine-pitch metric screws, it is particularly useful where tight thread fits and repeatable mating behaviour are required. Integrating this gauge into a routine control plan enables quick decisions at the operator level and supports statistical process control when results are logged. For purchasers seeking a standardised inspection tool that is easy to store and handle, this gauge represents a pragmatic balance between precision and everyday usability. Contact Metav Werkzeuge for application guidance and to secure the Metav IndustryLine Go ring gauge M60 x 1 mm for reliable thread inspection and integration into existing quality procedures Technical data Article number: M315.160.4 GTIN: 4054469125268 Manufacturer: Metav IndustryLine Thread: M60 x 1 mm Type: Go ring gauge Orientation: right-hand thread Facts Weight: 2.2 kg Standard: DIN 13, 6g Tariff number: 90173000 Special features Material: hardened gauge steel Application: for metric ISO fine threads Category: Gauges / Thread ring FAQ What is the Go ring gauge intended to check? The Go ring gauge is intended to verify external metric ISO fine threads; the M60 x 1 mm ring confirms a thread meets the DIN 13 maximum material requirements for a go condition. Does the gauge indicate thread quality beyond go/no-go? No; the ring provides a go/no-go decision. For dimensional characterisation, the ring gauge should be used alongside full measurement tools or a thread micrometer. Can this ring be used on left-hand threads? This specific ring is made for right-hand threads; left-hand threads require a corresponding left-hand gauge with the same nominal and tolerance class. How often should the ring gauge be recalibrated? Recalibration intervals depend on usage and internal quality procedures; regular inspection and calibration according to the workshop’s control plan are recommended for consistent traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x1.5 Metric ISO Fine Thread Go Ring Gauge Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a robust Go thread ring gauge that performs fast acceptance checks on M60×1.5 metric ISO fine threads, combines hardened gauge steel construction with traceable delivery, and arrives with a calibration certificate for immediate use; order the gauge directly via Metav Werkzeuge or consult our specialists for tailored advice. Go Thread Ring Gauge M60×1.5 (metric ISO fine thread), right-hand — Metav IndustryLine The Go Thread Ring Gauge M60×1.5 is a right-hand, metric ISO fine-thread pass gauge designed for production and inspection tasks where reproducible acceptance testing is required Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Delivered with calibration certificate Right-hand metric ISO fine thread Minimise rejects with reliable pass testing The primary purpose of this ring gauge is to provide a definitive Go (pass) check for fine-pitch metric threads, reducing uncertainty at assembly and inspection points. By matching the nominal profile for M60×1.5 and the 6g tolerance class specified in DIN 13, the gauge offers a quick, repeatable decision: pass or further inspection. This direct acceptance method shortens measurement cycles and supports lean production by preventing uncertain borderline judgements. The measurable benefit is faster throughput at inspection stations and fewer stop-the-line events caused by ambiguous thread assessments. Durable construction for repeatable shop‑floor use Manufactured from hardened gauge steel, the ring gauge resists wear and maintains profile integrity under frequent use. The solid construction ensures that critical dimensions remain stable over many inspection cycles, which translates into long service intervals and lower lifecycle cost compared with softer fixtures. The device’s right‑hand thread orientation suits standard assembly lines and thread-cutting operations, while the substantial mass contributes to handling stability during manual checks. Delivered with a calibration certificate, the gauge arrives ready for traceable use in quality systems and provides documented evidence for internal audits and customer inspections. Easy integration into quality workflows This gauge is intended for straightforward integration into standard inspection routines. As a Go gauge, it verifies conformity quickly at the production line or in the inspection room without elaborate measuring equipment, making it well suited to shop-floor operators and incoming goods testing alike. The included calibration documentation supports traceability and record keeping, which is important for regulated industries and for maintaining supplier quality records. For teams seeking consistent pass/no‑pass criteria, the ring gauge complements digital measuring systems and reduces operator judgement calls, enhancing overall measurement reliability and confidence in assembly quality. Contact Metav Werkzeuge today to discuss application details or to order the Metav IndustryLine Go thread ring gauge M60×1.5 (SKU M315.760.6) with calibration certificate and expert delivery guidance Technical data Article number: M315.760.6 GTIN: 4054469152554 Tariff number: 90173000 Weight: 1.8 kg Material: gauge steel, hardened Thread: M60×1.5 Tolerance/class: DIN 13, 6g Orientation: right-hand thread Calibration certificate included Facts Thread size: M60×1.5 Pitch: 1.5 mm Weight: 1.8 kg Tolerance class: 6g Standard reference: DIN 13 Special features Go gauge (pass) for metric ISO fine threads Hardened gauge steel for wear resistance Delivered with calibration certificate for traceability Right-hand metric ISO fine thread application Category: gauges / measuring pins FAQ What is the gauge used for and how does it work? The Go thread ring gauge M60×1.5 (Metav IndustryLine, SKU M315.760.6) performs a pass check on metric ISO fine threads: the part should screw into the ring without excessive force to be classed as within tolerance. Is a calibration certificate included with the gauge? Yes, the ring gauge is supplied with a calibration certificate, providing documented verification of conformity and enabling immediate integration into quality documentation. Which standard and tolerance does the ring gauge follow? The instrument adheres to DIN 13 and is manufactured to the 6g tolerance class for metric ISO fine threads, ensuring compatibility with standard acceptance criteria. Can this gauge be used in a production environment? Designed for shop-floor use, the hardened construction of the Metav IndustryLine gauge supports frequent, repeatable checks in production and inspection settings. How should the gauge be stored to maintain accuracy? Store the ring gauge in a dry, stable environment and keep the calibration certificate with the instrument; routine inspection schedules should be followed according to internal quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x1.5 Thread Go Plug Gauge Metric ISO Fine Pitch Right Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Benefit from a hardened gauge-steel construction, DIN 13 tolerance 6H and an included calibration certificate for reliable, repeatable thread verification; order directly via Metav Werkzeuge or consult our specialists for batch supply and traceable quality assurance. Thread plug gauge GUT M60 x 1.5 — right‑hand metric ISO fine thread, hardened gauge steel The Thread plug gauge GUT M60 x 1.5 is a precision checking gauge designed to verify right‑hand metric ISO fine threads to DIN 13 tolerance 6H in production and inspection environments. Includes calibration certificate Hardened gauge steel construction Metric ISO fine thread M60 x 1.5 Right‑hand thread, DIN 13 tolerance 6H Assured conformity for production and quality control The Thread plug gauge provides a straightforward, objective check of internal threads, confirming conformity to DIN 13 with the specified 6H tolerance class. Its nominal size M60 x 1.5 matches common fine‑threaded components used in assembly and machine construction, enabling fast go/no‑go decisions at the inspection station. Supplied with a calibration certificate, the gauge supports traceability in quality documentation and reduces downtime caused by uncertain thread fits. Durable construction for fast, repeatable inspections Manufactured from hardened gauge steel, the gauge resists wear under frequent contact and maintains dimensional stability across repeated checks. The robust design and clean geometry make handling on the shop floor efficient and help achieve repeatable results without elaborate fixturing. Weight and form factor suit manual inspection workflows, allowing operators to verify thread acceptance quickly and reliably during routine production sampling. Calibrated checks and integration into inspection routines Delivery with a calibration certificate ensures the gauge can be entered directly into a quality system and used for documented acceptance testing. The combination of standardised tolerance (DIN 13, 6H) and traceable calibration supports customer audits and reduces the administrative effort of proving thread conformity. For procurement and stocking, the instrument is suited to workshops and quality labs that require consistent, documented verification of metric fine threads. Contact Metav Werkzeuge to discuss calibrated batch orders, supply options and how this calibrated thread gauge can be integrated into existing inspection processes Technical data Article number: M315.560.6 GTIN: 4054469152073 Label: Gewinde‑Lehrdorn GUT M 60 X 1,5 für metrisches ISO‑Feingewinde, rechts Facts Thread size: M60 x 1.5 Tolerance class: 6H Weight: 1.8 kg Tariff number: 90173000 Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Supplied with calibration certificate Conforms to DIN 13 FAQ What thread standard does this gauge check? The gauge verifies metric ISO fine threads to DIN 13 with a 6H tolerance class for the M60 x 1.5 size. Is a calibration document included? Yes, the delivery contains a calibration certificate; the Thread plug gauge GUT M60 x 1.5 is supplied with traceable verification suitable for quality records. What material is the gauge made from? Construction is hardened gauge steel, chosen for wear resistance and dimensional stability during repeated inspections. Is this a right‑hand or left‑hand gauge? This item is a right‑hand thread plug gauge for metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x1.5 Thread Go Ring For ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction, conformity to DIN 13 (6g) and an included calibration certificate for reliable pass/fail decisions in production. Order the ring gauge directly via Metav Werkzeuge or consult our specialists for specification matching. Gewinde-Lehrring AUSSCHUSS M 60 x 1,5 — Thread ring gauge with DIN 13 (6g) tolerance, right‑hand Gewinde-Lehrring AUSSCHUSS M 60 x 1,5 is a right‑hand metric ISO fine‑thread no‑go ring intended for swift pass/fail inspection of M60 x 1.5 threads in production and quality control environments Right‑hand metric fine thread Hardened gauge steel construction Calibration certificate included DIN 13 tolerance class 6g Ensure conformance with a precise no‑go check A no‑go ring gauge is a decisive tool for safeguarding thread quality: it indicates when an internal thread exceeds the maximum material condition and must be rejected. The ring supplied here is designed for metric ISO fine threads and carries the DIN 13 (6g) tolerance designation, which aligns the check with established industry standards. Supplied with a calibration certificate, the gauge offers documented traceability and immediate usability in inspection routines, reducing ambiguity in acceptance criteria and supporting consistent production decisions. Durable design for repeatable inspections Manufactured from hardened gauge steel, the ring gauge resists wear and maintains its reference dimensions over repeated cycles, which preserves measuring confidence and lowers replacement frequency. The M60 x 1.5 specification and right‑hand orientation match common fine‑thread components used in assemblies and fixtures, while the weight and solid construction help ensure stable handling during manual checks. Using a hardened ring minimises distortion at the contact surfaces and therefore improves the repeatability of pass/fail assessments on the shop floor. Simple integration into quality workflows This ring gauge is suitable for in‑line verification and final inspection steps where a fast go/no‑go decision is required. The combination of standardised tolerance class and a supplied calibration record simplifies documentation and audit processes, supporting traceability in production batches. For workshops seeking a pragmatic measurement solution, the instrument reduces downtime caused by uncertain thread conditions and supports robust rejection criteria, helping to avoid field failures and rework while preserving product reputation. Contact Metav Werkzeuge today for expert advice and to secure the M60 x 1.5 no‑go ring gauge from Metav IndustryLine — calibrated and ready for immediate use Technical Data Article number: M315.860.6 GTIN: 4054469152790 Weight: 1.8 kg Size: M60 x 1.5 Material: Gauge steel, hardened Standard: DIN 13, 6g ECLASS: 21170214 Customs tariff: 90173000 Facts Thread form: Metric ISO fine thread Orientation: Right‑hand Tolerance class: 6g Net weight: 1.8 kg Special features No‑go (reject) ring gauge Supplied with calibration certificate Suitable for production and QC use Robust, hardened construction for wear resistance FAQ What does "AUSSCHUSS" mean in the product designation? The term "AUSSCHUSS" designates this item as a no‑go (reject) ring; the Gewinde‑Lehrring AUSSCHUSS M 60 x 1,5 is intended to indicate threads that exceed acceptable limits. Is a calibration certificate included with the ring gauge? Yes, the Gewinde‑Lehrring AUSSCHUSS M 60 x 1,5 is delivered with a calibration certificate, providing traceability for inspection records. For which thread standard is this ring gauge suitable? This ring gauge is made for metric ISO fine threads and conforms to DIN 13 with tolerance class 6g, matching common industrial thread specifications. Can this gauge be used for both go and no‑go testing? The supplied item is a no‑go ring designed to detect oversize internal threads; separate go gauges are used to verify undersize limits. What material is used and why does it matter? The Gewinde‑Lehrring AUSSCHUSS M 60 x 1,5 is made from hardened gauge steel, which ensures durability and stable reference dimensions during repeated inspection cycles. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x1.5 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of a precision control tool that combines clear conformity checking, hardened construction and traceable calibration documentation for reliable quality assurance; order this gauge directly via Metav Werkzeuge or consult the specialists for application advice. No-go thread plug gauge M60 x 1.5 (metric ISO fine thread, right-hand) — Metav IndustryLine The No-go thread plug gauge M60 x 1.5 is a compact inspection gauge for rapid rejection testing of right-hand metric ISO fine threads in production and QA environments. No-go plug gauge for M60 x 1.5 Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, 6H standard Ensure thread conformity without guesswork A dedicated no-go plug gauge provides an unequivocal pass/fail control for internal threads, speeding up inline inspections and preventing out-of-tolerance parts from progressing in the process. With the nominal size M60 x 1.5 and compliance to DIN 13, 6H, the gauge is designed specifically for metric fine threads and enables immediate identification of rejects, reducing downstream rework and scrap. The clarity of a physical go/no-go result supports process decisions with minimal interpretation and integrates smoothly into production control routines. Built for repeatable use and long service life Manufactured from hardened gauge steel, the tool resists wear under repeated engagement, maintaining a consistent checking profile over many cycles. The robust construction and balanced geometry make the gauge simple to handle during frequent checks, providing repeatable contact without delicate setup. The combination of durable material and precise manufacture ensures a stable reference that sustains inspection integrity in routine shop-floor or laboratory settings. Traceable calibration that supports quality records This gauge is supplied with a calibration certificate, making results auditable and supporting quality management systems. The accompanying documentation confirms measurement conformity at delivery and facilitates integration into batch records or inspection logs. Traceable calibration reduces uncertainty in acceptance criteria and backs up supplier or internal quality claims with verifiable evidence. Practical benefits for inspection workflows Using a purpose-made no-go plug gauge shortens inspection time and simplifies training: operators read a single physical fit result rather than interpreting numerical deviations. The compact nature of the tool and its clear function suit both busy production lines and dedicated inspection benches. Additionally, the physical gauge complements dimensional measurement equipment by providing a fast-check mechanism before committing parts to downstream processes. For specification support, availability and tailored advice on integrating this Metav IndustryLine gauge into existing workflows, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants will assist with application-specific recommendations and supply options Technical data Article number: M315.660.6 GTIN: 4054469152318 SKU: M315.660.6 Core technical data Thread size: M60 x 1.5 Thread direction: right-hand Standard: DIN 13, 6H Weight: 1.8 kg Tariff code: 90173000 Special features Material: gauge steel, hardened Type: no-go (reject) plug gauge for metric ISO fine thread Supplied with calibration certificate FAQ What is the intended use of this plug gauge? The no-go plug gauge is intended for rejecting internal metric ISO fine threads that exceed the allowed tolerance; the M60 x 1.5 gauge provides a clear physical check for thread conformity. Does the gauge come with documentation for quality records? Yes, the gauge is supplied with a calibration certificate that documents the inspection status at delivery and supports traceability in quality records. Which standard does the gauge conform to? The gauge is manufactured to DIN 13, 6H, matching the tolerance class for metric ISO internal threads and suitable for standard inspection procedures. Is the material suitable for routine shop-floor use? Constructed from hardened gauge steel, the tool is designed for repeated engagement and stable performance in production and inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x2 Thread Go Gauge For ISO Fine Thread Right-Handed Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Combining hardened gauge steel construction, DIN 13, 6H compliance and an accompanying calibration certificate delivers consistent, traceable verification of metric fine internal threads. Rely on Metav Werkzeuge for direct supply or consult our specialists for application advice and integration into production control. Thread plug gauge GO M60 x 2.0 — Metric ISO fine-thread, right-hand, hardened A Thread plug gauge GO M60 x 2.0 designed for rapid, repeatable inspection of metric ISO fine internal threads in production and quality assurance environments. GO thread plug gauge M60 x 2.0 Metric ISO fine thread, right-hand Hardened gauge steel construction Supplied with calibration certificate Ensure production quality with a robust, standards-compliant gauge The GO type thread plug offers a straightforward pass verification method that speeds up routine acceptance checks and reduces rework. Made from hardened gauge steel, the gauge resists wear and preserves the reference form over repeated use, which supports consistent decision-making on the shop floor. Conformity to DIN 13, 6H provides a clear specification for thread tolerance, helping to harmonise inspection criteria across suppliers and internal quality control. Fast, low-complexity inspection for efficient workflows Using a GO plug gauge simplifies inspection: the part either fits or it does not, allowing for immediate sorting without complex measurement chains. The M60 x 2.0 specification and right-hand orientation match common metric fine-thread applications in mechanical assemblies, fixtures and connection interfaces. This tangible simplicity reduces operator training needs and keeps routine checks efficient while maintaining objective acceptance criteria. Traceability and assurance that supports documented quality The gauge is supplied with a calibration certificate, enabling direct traceability within quality systems and audit records. Supplied documentation means the tool can be entered into calibration schedules or used as a reference during incoming inspection. Backed by Metav’s positioning as a quality filter for the European market, the product supports reliable supply and consistent stock availability for production and maintenance operations. Contact Metav Werkzeuge to discuss the suitability of the Metav IndustryLine GO thread plug gauge M60 x 2.0 for specific applications or to arrange procurement: eMail info@metav-werkzeuge.com | Tel +49 2822 7131930 Technical data Article number: M315.560.7 GTIN: 4054469153032 Designation: Thread plug gauge GO M60 x 2.0 Facts Thread size: M60 x 2.0 Weight: 1.8 kg Tariff code: 90173000 Standard: DIN 13, 6H Special features Material: hardened gauge steel Right-hand thread Supplied with calibration certificate GO gauge type Category: Gauges / Lehren FAQ What is the purpose of this GO thread plug gauge? The GO thread plug gauge is intended for quick pass/fail verification of internal metric ISO fine threads; the Thread plug gauge GO M60 x 2.0 confirms whether a threaded hole meets the specified M60 x 2.0, DIN 13, 6H criteria. Does the gauge come calibrated? Yes, the gauge is supplied with a calibration certificate, allowing immediate traceability and integration into quality documentation for the Metav IndustryLine thread plug gauge (SKU M315.560.7). Which materials is the gauge suitable for inspecting? The gauge inspects thread geometry regardless of the parent material; the hardened gauge steel construction ensures the reference form remains stable during repeated use across typical production materials. How should the GO gauge be used during inspection? Insert the GO gauge into the threaded feature; if it fully engages without forcing, the thread passes the specified acceptance criteria for the M60 x 2.0 metric ISO fine thread. Is the gauge conformant to recognised standards? The gauge is manufactured to the DIN 13, 6H specification for metric fine threads and is supplied with a calibration certificate for traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x2 Thread Go Gauge For Metric ISO Fine Thread, Right-Handed, Hardened Gauge Steel DIN 13 6H, Calibrated - Metav IndustryLine
Secure, reproducible pass/fail inspection is achieved by combining a hardened gauge steel construction with the conformity of DIN 13, 6H; the gauge is supplied together with a calibration certificate for traceable acceptance testing. Order the thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread plug gauge NO‑GO M60×2, right‑hand — Metav IndustryLine Thread plug gauge NO‑GO M60×2 for metric ISO fine thread, right‑hand, designed for quick verification of internal thread conformity in production and inspection environments. NO‑GO thread plug gauge for M60×2 fine thread Hardened gauge steel, precise DIN 13, 6H fit Supplied with calibration certificate Right‑hand metric ISO fine thread Clear go/no‑go decisions at the inspection station A dedicated NO‑GO end is the fastest method to detect out‑of‑tolerance internal threads without lengthy measurement procedures. The M60×2 geometry matches the common metric ISO fine thread profile so that a single test gives an unambiguous pass or reject result. Using a plug gauge simplifies routine checks on the shop floor: where dimensional readouts require interpretation, a go/no‑go check delivers a definitive outcome immediately, reducing cycle time and avoiding unnecessary rework. Robust construction for repeatable results Manufactured from hardened gauge steel, the gauge resists wear during frequent handling and keeps the functional limits stable over many inspection cycles. Conformity to DIN 13, 6H ensures the applied tolerances correspond to industry norms, making the gauge suitable for use in mechanical engineering and precision assembly operations. The solid construction also stabilises the tactile feedback during insertion, which supports consistent decision thresholds across different operators. Traceability and quality assurance built in Delivery includes a calibration certificate, providing documented evidence of the gauge condition at the time of supply and simplifying quality management documentation. Traceable calibration supports internal audits and customer requirements, improving acceptance rates in incoming goods inspections or final quality control. For workshops seeking to streamline inspection protocols, the combination of a dedicated plug gauge and a certificate reduces ambiguity and strengthens the audit trail. Practical fit for production and inspection workflows Compact and straightforward to use, the gauge integrates into existing test benches or manual inspection stations without special fixtures. The right‑hand orientation and metric ISO profile suit production lines machining fine threads, enabling rapid sampling and early detection of tooling wear or setup drift. When paired with Metav IndustryLine procurement and advice, the item becomes part of a reliable quality assurance strategy that keeps production moving with fewer stoppages. Contact Metav Werkzeuge to request the NO‑GO thread plug gauge M60×2 with calibration certificate and expert guidance on suitability for specific thread inspection tasks Technical data SKU: M315.660.7 GTIN: 4054469153247 Weight: 1.8 kg Thread size: M60×2 Hand: right‑hand Material: gauge steel, hardened Standard: DIN 13, 6H Tariff number: 90173000 Facts Type: NO‑GO thread plug gauge Application: metric ISO fine thread inspection Packaging: single item Calibration: supplied with certificate Special features Supplied with calibration certificate Hardened gauge steel construction Designed for pass/fail testing of internal threads Intended use: production and inspection stations FAQ What does NO‑GO mean for this gauge? The NO‑GO end ensures that an internal thread exceeding the upper tolerance limit is rejected; the Thread plug gauge NO‑GO M60×2 provides a direct pass/fail check for metric ISO fine threads. Is the gauge delivered with traceable documentation? Yes, the gauge is supplied with a calibration certificate confirming the measured condition at delivery for quality records. Which standard is this gauge manufactured to? The gauge is made to DIN 13, 6H, matching the tolerance class commonly used for metric ISO fine threads. Can this gauge be used on production lines to detect tool wear? Yes, the plug gauge is suitable for routine sampling on the shop floor and provides fast detection of tooling drift or wear. What material is the gauge made from? The gauge is manufactured from hardened gauge steel to maintain dimensional stability and resist wear during repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x2 Thread Go Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened Go ring gauge that checks right-hand metric ISO fine threads with DIN 13 (6g) conformity and arrives with a traceable calibration certificate; combine durability and inspection-ready traceability for reliable thread verification workflows. Order the gauge directly via Metav Werkzeuge or consult the Metav team for selection help. Thread ring gauge GO M60 x 2.0 — Hardened gauge steel, DIN 13 (6g) right-hand A Thread ring gauge GO M60 x 2.0 designed for rapid, shop-floor verification of right-hand metric ISO fine threads in production and inspection environments Go ring gauge for quick pass/fail checks Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6g Precision where thread conformity must be certain The gauge is a purpose-made inspection tool for M60 x 2.0 metric fine threads, manufactured from hardened gauge steel to resist wear and maintain dimensional stability over repeated use. Conformity to DIN 13 (6g) means the acceptance limit is defined according to established standards, allowing straightforward go/no‑go decisions during in‑process checks or final inspection. The solid construction minimises deformation, so manufacturing tolerances can be verified reliably without complex measurement setups. Ready for quality systems and traceability Delivered with a calibration certificate, the ring gauge supports traceable documentation for internal quality control and audit situations. The certificate documents the calibration status and provides evidence for batch releases and inspection records. Using a calibrated Go ring shortens inspection cycles: parts that pass the GO check can be moved forward without time-consuming measurements, improving throughput while preserving confidence in conformity. Robust design for repeated shop use The construction from hardened gauge steel yields high wear resistance, which reduces frequency of replacement and contributes to predictable long‑term costs. The gauge's geometry follows the standard thread form required for ISO fine threads, so assembly and fit characteristics are reflected in the inspection result. As a GO‑only ring, the tool offers simple operation and immediate feedback in busy production environments, reducing reliance on time-consuming gauging procedures. Suitable applications and practical handling Intended for workshop inspection, incoming goods control and production sampling, the gauge fits routine quality assurance tasks in metalworking and component assembly. The compact, hand‑held form facilitates rapid checks on fixtures and assemblies without complex fixturing, while the robust material and finish make it suitable for frequent handling. For customers requiring documentation, the supplied calibration certificate ensures the gauge can be integrated into calibrated tool inventories. For traceable inspection readiness, request the Metav IndustryLine GO ring gauge via Metav Werkzeuge and benefit from our selection advice and stock proximity in Emmerich for prompt delivery. Technical data Item number: M315.760.7 GTIN: 4054469153629 Tariff number: 90173000 Facts Thread size: M60 x 2.0 Weight: 1.8 kg Standard: DIN 13, tolerance 6g Special features Material: hardened gauge steel Type: GO ring gauge, right-hand thread Delivered with calibration certificate FAQ What is the purpose of this ring gauge? The ring gauge is intended for go/no‑go verification of right‑hand metric ISO fine threads; the GO characteristic confirms whether a thread falls within the acceptance limit for M60 x 2.0. Is the gauge traceable for quality systems? Yes, the gauge is supplied with a calibration certificate that documents its calibrated condition and supports traceability in inspection records. Which standard does the gauge follow? The thread form and tolerance follow DIN 13 (6g), ensuring compatibility with standard ISO fine-thread specifications. What material is used and why does it matter? Manufactured from hardened gauge steel, the ring provides enhanced wear resistance and dimensional stability for repeated shop-floor checks. Can this gauge be used for left-hand threads? No, this specific ring is configured for right-hand threads; left-hand checks require the corresponding left-hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com