Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M60x2 Thread Go Ring Metric ISO Fine Pitch Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, conformity to DIN 13, 6g and the supplied calibration certificate for reliable, repeatable thread inspection; order supply or request technical advice via Metav Werkzeuge for seamless integration into production control. Thread gauge ring AUSSCHUSS M60 x 2.0 — right‑hand metric ISO fine thread, hardened gauge steel A Thread gauge ring AUSSCHUSS M60 x 2.0 designed as a no‑go (reject) ring for dimensional verification of right‑hand metric ISO fine threads, intended for use in production inspection and incoming goods control Hardened gauge steel construction Conforms to DIN 13 tolerance 6g Includes calibration certificate Right‑hand metric ISO fine thread Consistent thread inspection that cuts scrap and rework The AUSSCHUSS variant is intended as a no‑go control element for external thread inspection and thus supports rapid go/no‑go decision making at the machine or at the inspection bench. Manufactured from hardened gauge steel, the ring provides a hard‑wearing contact surface that preserves the reference geometry over prolonged use. Compliance with DIN 13 and the 6g tolerance class means the gauge is matched to the common acceptance criteria for metric ISO fine threads; this enables direct, objective evaluation of whether a threaded part is within specification or must be rejected, reducing subjective assessment and downstream rework. Durable design for repeatable production checks Built for frequent handling in industrial environments, the gauge’s material choice and heat treatment deliver dimensional stability and resistance to wear. The solid construction and mass contribute to stable engagement with external threads, increasing repeatability of measurements during batch inspections. As a dedicated reject‑ring, it simplifies the inspection flow: parts that will not accept the ring are identified immediately. The robust build also minimises the need for frequent replacement, lowering total lifecycle cost while maintaining inspection throughput. Traceable calibration for quality assurance and documentation Delivery includes a calibration certificate, which documents the condition of the gauge at handover and supports traceability within quality management systems. The certificate enables incorporation of the ring into sampling plans and audit trails without additional preparatory steps. Clear identification via SKU and GTIN supports inventory control and record keeping, while the documented conformity to recognised standards assists in meeting customer and regulatory requirements. This traceability is particularly valuable where formal inspection records are required for production batches or supplier qualification. Practical applications and workshop integration Suitable for routine quality control in machining, assembly and incoming inspection, the ring is intended for direct engagement with external threads manufactured to metric ISO fine thread form. Its right‑hand orientation and M60 x 2.0 specification make it appropriate for medium to large component threads commonly found in mechanical assemblies and fastening systems. The ring’s characteristics support fast, in‑line rejection decisions, making it a pragmatic tool where simple, unambiguous acceptance criteria are needed to maintain production flow and prevent non‑conforming parts from proceeding to assembly. Contact Metav Werkzeuge for tailored advice on integrating Metav IndustryLine thread gauges into existing inspection routines, including supply of the M315.860.7 with calibration certificate and rapid delivery from Emmerich Technical Data Article number: M315.860.7 GTIN: 4054469153834 Tariff number: 90173000 Data Thread size: M60 x 2.0 Weight: 1.8 kg Standard: DIN 13, tolerance 6g Special features Material: hardened gauge steel Type: no‑go (AUSSCHUSS) ring gauge for external threads Orientation: right‑hand metric ISO fine thread Supplied with calibration certificate FAQ What is the intended use of this ring gauge? The ring gauge is intended as a no‑go (reject) control for external right‑hand metric ISO fine threads, allowing immediate pass/fail decisions during production and incoming inspection. Does the gauge come with traceable calibration? Yes, the item is supplied with a calibration certificate that documents the measurement condition at delivery and supports traceability in quality management systems. Which standard and tolerance does the gauge follow? The gauge conforms to DIN 13 and the 6g tolerance class, matching the typical acceptance criteria for metric ISO fine threads. What material is the gauge made from and why is that important? Manufactured from hardened gauge steel, the material choice ensures wear resistance and dimensional stability, which are essential for repeatable inspections over time. Is this gauge suitable for left‑hand threads? This particular ring is specified for right‑hand metric ISO fine threads; left‑hand applications require the corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x2 Thread Limit Plug Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Benefit from precise thread verification with DIN‑compliant tolerances and hardened gauge steel for consistent pass/fail decisions; order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application guidance. Limit plug gauge M60 x 2 mm — Go/No‑Go thread plug, DIN 13 (6H) (Metav IndustryLine) A precision Limit plug gauge M60 x 2 mm designed to verify right‑hand metric ISO fine threads for production inspection and incoming goods control. DIN 13, 6H compliance for reliable tolerances Hardened gauge steel for long service life Right‑hand metric thread M60 x 2 Robust 1.5 kg mass for stable handling Repeatable tolerance checks on production lines A go/no‑go thread plug gauge delivers an immediate quality verdict where it matters: on the shop floor and at the inspection bench. The DIN 13, 6H designation defines the nominal geometry and tolerance zone for metric ISO fine threads, so a passed "go" end confirms the thread meets the intended profile while the "no‑go" end checks that the thread does not exceed the maximum material condition. Using a purpose‑made limit gauge reduces interpretation effort and shortens cycle times compared with measuring on micrometres or calipers, supporting faster decisions in serial production and incoming inspection. Robust construction for dependable everyday use Manufactured from hardened gauge steel and weighing 1.5 kg, this thread plug is built for repeated handling and stable insertion. The mass and solid material increase resistance to accidental bending and help maintain geometry during use, which in turn preserves measuring certainty across many cycles. The go/no‑go concept requires minimal operator training and avoids filterable measurement error sources; the simple mechanical check is fast to perform and easy to document for quality records. The durable finish and heat treatment ensure wear resistance and long service life in industrial environments. Clear application scope and traceable identification Intended for right‑hand M60 x 2 metric ISO fine threads, the gauge suits assembly verification, fastener checks and contract acceptance testing. The item is produced to gauge standards and marked for traceability so it can be referenced in inspection plans or batch records; the compact, single‑piece design simplifies handling and storage. For customers seeking a reliable thread control solution, the combination of standard compliance, robust material and straightforward go/no‑go checks makes this type of gauge an efficient component of any quality assurance workflow managed through Metav’s procurement channels. Order or request application advice via Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com for fast supply and technical support on Metav IndustryLine gauges Technical data Article number: M315.060.7 GTIN: 4054469123608 Thread size: M60 x 2 Right‑hand thread Facts Material: hardened gauge steel Standard: DIN 13, 6H Mass: 1.5 kg Customs tariff number: 90173000 Special features Go/No‑Go limit plug concept Suitable for metric ISO fine threads Category: Gauges / Measuring pins Condition: good FAQ What is the intended use of this limit plug gauge? The Limit plug gauge M60 x 2 mm is intended for quick go/no‑go verification of right‑hand metric ISO fine threads on components and fasteners during production and incoming inspection. Which standard does the gauge conform to? This gauge is manufactured to DIN 13, 6H, which defines the thread profile and tolerance zone for the specified metric ISO fine thread. What does a pass or fail mean with a go/no‑go gauge? A pass at the go end indicates the thread meets the minimum required profile; a failure at the no‑go end signals the thread exceeds the maximum material boundary and requires corrective action. Is the material suitable for industrial workshop use? Yes. The gauge is made from hardened gauge steel to provide wear resistance and stable geometry for repeated checks in an industrial environment. Can this gauge be used for both coarse and fine threads? This specific gauge is designed for fine threads with size M60 x 2; different thread series or pitches require the corresponding size of plug gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x3 Thread Gauge Ring, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Taking advantage of the combination of reliable material, DIN-compliant tolerances and an included calibration certificate ensures rapid, reproducible rejection checks in production. Benefit from hardened gauging steel and a right‑hand, metric fine‑thread form for consistent inspection results. Order the no-go thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. No‑go thread ring gauge M60 x 3.0 — metric ISO fine thread (right‑hand) The No‑go thread ring gauge M60 x 3.0 is a dedicated rejection gauge for final inspection and inline quality control of metric ISO fine threads in industrial production No‑go ring gauge for M60 x 3.0 threads Hardened gauging steel for wear resistance Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Faster defect detection for assembly‑grade threads A dedicated no‑go thread ring gauge speeds up routine inspections by providing an immediate go/no‑go decision for critical fastening threads. The M60 x 3.0 form checks the upper limit of acceptable thread size so that oversized or improperly cut threads are identified before assembly. This preserves cycle times and reduces downstream rework, delivering a measurable improvement in process reliability and component interchangeability. Stable measurements through hardened construction and standardised tolerances Constructed from hardened gauging steel, the ring maintains dimensional integrity across repeated use, which reduces wear‑related drift and extends service life. Manufactured to DIN 13 with a tolerance class of 6g, the gauge provides a clear interpretive framework for inspectors; the 6g specification corresponds to the standard medium tolerance for metric threads, facilitating consistent acceptance criteria across production lots. The item is supplied with a calibration certificate, which documents traceability and the measurement status at delivery. Practical integration into shop‑floor inspection routines The ring’s right‑hand thread form and standard M60 x 3.0 geometry make it straightforward to incorporate into existing inspection jigs or hand‑checking procedures. Use the gauge at first‑off checks, batch sampling or final inspection to ensure that only compliant components proceed to assembly. The robust design supports frequent handling without complex maintenance, while the clear pass/fail nature of the instrument reduces interpretation time during quality audits and helps enforce documented inspection routines. Contact Metav Werkzeuge for procurement advice or to order the M315.860.8 no‑go thread ring gauge; technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.860.8 GTIN: 4054469154602 Label: No‑go thread ring gauge M60 x 3.0 Category: Gauges / Thread inspection Facts Thread designation: M60 x 3.0 Tolerance class: 6g Weight: 1.8 kg Tariff code: 90173000 Special features No‑go (reject) ring gauge function Material: gauging steel, hardened Right‑hand metric ISO fine thread Supplied with calibration certificate Manufactured to DIN 13 FAQ What does the no‑go ring gauge indicate during inspection? The no‑go ring gauge indicates whether a thread exceeds the maximum acceptable dimensions; the No‑go thread ring gauge M60 x 3.0 should not pass onto a correctly sized male thread — a pass on the gauge signals rejection. Is the gauge supplied with traceable calibration documentation? Yes, the ring gauge is supplied with a calibration certificate that documents the measurement status at delivery for traceability in quality records. Which standard and tolerance class apply to this ring gauge? The product is manufactured to DIN 13 with a 6g tolerance class, matching common medium‑tolerance specifications for metric threads. Can the gauge be used for left‑hand threads? This specific item is produced as a right‑hand thread form; left‑hand versions require a separate gauge manufactured for that thread direction. What material is the gauge made from and how does that affect durability? The gauge is made from hardened gauging steel, which provides enhanced wear resistance and dimensional stability during repeated shop‑floor use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x3 Thread Go Gauge For ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction and conformity to DIN 13, 6H for consistent go/no‑go verification of metric fine threads; supplied with a calibration certificate for traceable quality. Order the calibrated thread gauge plug directly via Metav Werkzeuge or ask our consultants if needed. Thread Gauge Plug GUT M60 x 3.0 — Right‑hand metric ISO fine thread gauge plug (Metav IndustryLine) The Thread Gauge Plug GUT M60 x 3.0 is a hardened gauge plug designed for go/no‑go verification of right‑hand metric ISO fine threads in production and quality control environments. Hardened gauge steel construction Calibrated with certificate included For M60 x 3.0 metric fine threads Conforms to DIN 13, tolerance 6H Fast, reliable go/no‑go verification for production lines A plug gauge provides a rapid, deterministic check of internal threads: it confirms whether a threaded bore meets the required profile or must be reworked. The combination of a hardened gauge‑steel body and the M60 x 3.0 geometry gives reproducible contact under repeated use, so process technicians obtain immediate pass/fail results without lengthy measurement cycles. This reduces stoppages and supports consistent throughput in batch production while maintaining objective inspection criteria. Traceability and audit readiness with a supplied calibration certificate The gauge is supplied calibrated with a certificate, which documents the verification against defined reference standards and creates an audit trail for quality records. A calibration certificate demonstrates that the inspection tool has been checked and accepted for its intended function; this supports internal quality systems and external audits where documented measurement capability is required. For purchase orders that demand verifiable inspection tools, the included certificate removes the need to arrange separate calibration before first use. Robust material and standard conformity for long service life Manufactured from hardened gauge steel, the plug is resistant to wear and maintains dimensional stability under normal workshop conditions. Conformity to DIN 13, 6H indicates the thread form and tolerance class used for metric internal threads, meaning the gauge plug corresponds to the acceptance limits typically required in mechanical engineering. The result is a tool that remains reliable over many inspection cycles, reducing replacement frequency and supporting steady quality control. Simple integration into existing quality processes The right‑hand metric fine‑thread design fits directly into conventional inspection routines for threaded components and fixtures. The compact, single‑piece construction makes handling straightforward on the shop floor; visual and tactile feedback from go/no‑go checks speeds operator training and reduces measurement uncertainty. The product is listed under SKU M315.560.8 and GTIN 4054469154039, facilitating direct stock checks and procurement within established material management systems. Contact Metav Werkzeuge today to request the calibrated Thread Gauge Plug GUT M60 x 3.0 (SKU M315.560.8) for your quality line or to discuss batch supply and documentation—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.560.8 GTIN: 4054469154039 Manufacturer: Metav IndustryLine Facts Thread size: M60 x 3.0 Weight: 1.8 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13, 6H Calibrated; certificate included FAQ What is this gauge plug used for? The thread gauge plug is used for go/no‑go verification of internal right‑hand metric ISO fine threads, specifically for M60 x 3.0, to quickly confirm acceptability in production and inspection. Is the gauge supplied calibrated? Yes — the gauge is delivered calibrated and includes a calibration certificate that documents its verification for traceability and audit purposes. Which standard and tolerance does the gauge follow? The plug conforms to DIN 13 with a 6H tolerance class, matching common industrial requirements for internal thread acceptance. What material is the gauge made from and how durable is it? Made from hardened gauge steel, the plug offers high wear resistance and dimensional stability for repeated inspection tasks. Can this gauge check left‑hand threads? No — this particular gauge plug is manufactured for right‑hand metric ISO fine threads only. How is the product identified for ordering? The gauge is listed under SKU M315.560.8 and GTIN 4054469154039 for straightforward procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x3 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, metric ISO fine-pitch conformity and a supplied calibration certificate for reliable production acceptance checks; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. GO thread ring gauge M60 x 3.0 — Metric ISO fine pitch ring gauge, right-hand GO thread ring gauge M60 x 3.0 is a right-hand, metric ISO fine-pitch inspection ring for fast acceptance testing of external threads in production and quality control Calibrated with certificate included Hardened gauge steel construction Metric ISO fine thread M60×3 Right-hand GO ring to DIN 13 6g Fast, unambiguous acceptance testing for external threads A dedicated go gauge provides clear pass/fail results within seconds, reducing inspection time and limiting subjective judgement. The ring verifies whether an external thread meets the DIN 13 6g acceptance limits for the M60 x 3.0 fine pitch, allowing immediate decisions at the production line. This approach supports faster throughput and fewer rework cycles, because each check confirms conformity to a recognised standard rather than relying on estimations. Robust material and geometry for stable measurements Manufactured from hardened gauge steel, this inspection ring resists wear and preserves its measuring profile over many cycles, maintaining accuracy and repeatability. The compact, single-purpose design focuses on dimensional fidelity and long-term stability; the choice of hardened tool steel minimises profile degradation, ensuring consistent contact geometry and a reliable reference for external threads during routine checks. Traceable calibration and compliance for quality systems Delivered with a calibration certificate, the ring gauge supports traceability in quality documentation and audit processes. The supplied certificate records the examination of the gauge and confirms its conformity at time of delivery, aiding integration into inspection plans and quality management systems. Traceable calibration reduces uncertainty in acceptance testing and provides documented evidence for component provenance and supplier requirements. Practical benefits for shop floor and inspection stations The gauge's straightforward form factor allows quick handling and immediate visual confirmation of results, streamlining batch inspections and in-process controls. As a standardised metric-thread reference, it complements gaging plans where repeatability and adherence to metric ISO norms are mandatory. The combination of a clearly defined tolerance class and hardened construction supports consistent production outcomes and contributes to lower scrap rates. For ordering, calibration details or tailored advice on integrating this GO ring gauge into existing inspection routines, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 — our specialists will advise on delivery and documentation. Technical Data Article number: M315.760.8 GTIN: 4054469154411 Weight: 1.8 kg Thread designation: M60 x 3.0 Norm: DIN 13, 6g Facts Thread type: Metric ISO fine pitch Handedness: Right-hand Gauge function: GO (acceptance) ring Country tariff code: 90173000 Special features Material: Hardened gauge steel Delivered with calibration certificate Intended use: External thread acceptance testing Category: Thread ring gauge FAQ What is the intended use of this ring gauge? The ring gauge checks acceptance of external threads to the M60 x 3.0 metric ISO fine-pitch specification and confirms conformity to DIN 13, 6g. Is a calibration certificate supplied with the gauge? Yes, the gauge is delivered with a calibration certificate that documents inspection at time of delivery. Can this gauge be used for left-hand threads? This specific ring is right-hand; left-hand applications require the corresponding left-hand gauge. Which material is the gauge made from and why does that matter? The ring is made from hardened gauge steel, chosen for long-term wear resistance and stable measuring geometry during repeated use. Does the gauge replace dimensional measurement with callipers or micrometres? The ring gauge provides a fast go/no-go acceptance check; it is complementary to detailed dimensional measurement methods rather than a replacement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x3 Thread Go/No-Go Plug Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of a hardened gauge‑steel body, DIN 13 tolerance 6H and a supplied calibration certificate to secure quick, reliable go/no‑go checks in inspection and production. Order the thread plug gauge directly via Metav Werkzeuge or consult the specialists if application advice is required. Thread plug gauge NO‑GO M60×3 — right‑hand metric ISO fine thread gauge (Metav IndustryLine) A Thread plug gauge NO‑GO M60×3 for rapid go/no‑go verification of right‑hand metric ISO fine threads in production and quality control environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Delivered with calibration certificate Fast, unambiguous pass/fail control for threaded parts A dedicated no‑go plug such as this is designed for immediate, objective assessment of thread acceptability. The M60×3 sizing and DIN 13 tolerance class 6H enable simple go/no‑go routines that eliminate prolonged setting times and interpretation errors on the shop floor. In practice, the tool reduces cycle time for thread inspection and prevents non‑conforming components from continuing down the line, which contributes to improved overall efficiency and fewer rework episodes. Robust materials for prolonged service life Manufactured from gauge steel and hardened for wear resistance, the gauge stands up to regular handling in workshop and inspection bays. The solid construction provides consistent contact geometry so that the gauge retains its dimensional integrity over repeated use. The weight and balance of the instrument support controlled engagement with the thread, reducing accidental damage while delivering repeatable tactile feedback that operators and quality engineers can trust. Traceability and process confidence through calibration Supplied with a calibration certificate, the gauge supports documented quality systems and audit trails. The presence of a signed calibration record ensures measurement traceability and simplifies integration into existing inspection protocols, whether for incoming inspection, in‑process control or final acceptance. This documented verification helps maintenance of statistical process control and reassures procurement and quality teams that the tool meets expected metrological standards. Practical fit for machining and inspection workflows Intended for right‑hand thread checks on metric ISO fine threads, the NO‑GO plug is particularly suitable for production plants, toolrooms and inspection benches where rapid, repeatable checks are required. The clear specification and robust finish make it easy to include the gauge in standard operating procedures and tool trays, supporting consistent quality decisions without complex set‑up. Its compact function complements automated and manual inspection steps alike. Contact Metav Werkzeuge today for availability and application guidance on the Metav IndustryLine thread plug gauges and ensure the correct gauge is specified for the intended inspection task Technical data Article number: M315.660.8 GTIN: 4054469154220 Classification: 21170228 Facts Thread size: M60×3 Weight: 1.8 kg Tariff number: 90173000 Tolerance class: 6H Special features No‑go (reject) plug gauge function Material: gauge steel, hardened Standard: DIN 13 Delivered with calibration certificate FAQ What is the intended use of this plug gauge? The NO‑GO thread plug gauge is intended for quick go/no‑go verification of right‑hand metric ISO fine threads, ensuring threaded parts meet the DIN 13 6H requirement during production and inspection. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate, providing traceability and documentation for quality systems and audit requirements. Which material and finish does the gauge have? The gauge is made from hardened gauge steel, chosen for wear resistance and stable contact geometry during repeated inspections. Can the gauge be used in production runs for in‑process control? The design and robustness of the plug gauge make it suitable for routine in‑process checks and final acceptance testing where quick, objective decisions are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x4 Thread Gauge Go Ring, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and strict DIN 13, 6g compliance for fast, repeatable thread inspection; the tool is supplied with a calibration certificate for traceable documentation. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. No‑Go Ring Gauge M60 x 4.0 — Metric ISO Fine Thread, Hardened Gauge Steel (Metav IndustryLine) No‑Go Ring Gauge M60 x 4.0 is a right‑hand inspection gauge for verifying metric ISO fine threads in production and incoming inspection. No‑go inspection for M60 x 4.0 threads Hardened gauge steel for long service life Supplied with calibration certificate Secure, standardised rejection criteria for fine threads A No‑Go check is the fastest way to prevent out‑of‑tolerance thread parts from entering assembly. The ring gauge here is engineered for the M60 x 4.0 metric ISO fine thread and manufactured to DIN 13, 6g, providing an unambiguous go/no‑go decision at the production line. Using a dedicated reject gauge reduces downtime from manual measurement, simplifies operator training and offers a repeatable inspection step that integrates directly into quality control routines. The clear mechanical pass/fail principle supplies immediate evidence of conformity or non‑conformity, helping to protect downstream processes from defective components. Robust construction and traceable calibration for audit readiness Constructed from hardened gauge steel, the gauge resists wear and maintains its profile over many inspection cycles, which lowers life‑cycle costs and keeps measurement uncertainty low. The tool is delivered with a calibration certificate, documenting results and enabling traceability within quality systems; this certificate supports audit requirements and internal quality records without additional calibration steps at receipt. The combination of durable material and supplied documentation increases confidence in routine controls and simplifies compliance with internal inspection plans. Practical integration into workshop and inspection workflows Designed as a compact, tactile inspection tool, the ring gauge is suitable for quick checks in workshop environments, receiving inspection and final acceptance procedures. The right‑hand geometry matches standard threaded parts and the sturdy body allows straightforward handling and storage between checks. As a tactile control, the device complements dimensional measurement equipment by offering an efficient screening method that reduces reliance on time‑consuming instruments for every part. For operations seeking to democratise precision across shifts and locations, this tool supports consistent decision‑making and reduces scrap through early detection. Recommend the Metav IndustryLine No‑Go ring gauge for reliable thread rejection checks and contact Metav Werkzeuge for technical matching or ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.860.9 GTIN: 4054469155326 Tariff number: 90173000 Facts Thread size: M60 x 4.0 Weight: 1.8 kg Standard: DIN 13, 6g Special features No‑go (reject) ring gauge for right‑hand metric ISO fine threads Material: hardened gauge steel Supplied with calibration certificate FAQ What is the intended use of this ring gauge? The No‑Go ring gauge M60 x 4.0 is intended for quick rejection checks of right‑hand metric ISO fine threads during production and incoming inspection. Does the gauge come with traceable documentation? Yes, the gauge is supplied with a calibration certificate that documents the inspection result for traceability and audit purposes. Which standard does the gauge adhere to? The device is manufactured to DIN 13, 6g, ensuring compatibility with common metric ISO fine‑thread tolerances. What material is the ring gauge made from? The ring gauge is made from hardened gauge steel to provide long service life and stable inspection performance. Can this gauge replace dimensional measurement for every inspection? The gauge is intended as a fast go/no‑go control; for full dimensional characterisation, complementing measurements with precision instruments is recommended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x4 Thread Gauge Ring, ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of high repeatability and clear conformity by using a hardened gauge-steel GO ring for quick production checks; the M60×4 thread size and DIN 13, 6g tolerance ensure consistent pass/fail decisions, and a calibration certificate is supplied for traceable results. Order or request technical advice directly via Metav Werkzeuge for specification support. Thread ring gauge GUT M60×4 (right-hand) — Metav IndustryLine A Thread ring gauge GUT M60×4 designed for rapid verification of metric ISO fine external threads, right-hand, suitable for production and incoming inspection GO ring for M60×4 threads Hardened gauge steel construction Supplied with calibration certificate DIN 13, tolerance 6g Confident pass/fail inspection to keep production moving The GO-type ring provides a clear, mechanical check of the external thread’s maximum-material condition: if the GO ring assembles freely, the part meets the allowed limits for the specified tolerance. Built for speed and repeatability, the gauge reduces subjective judgement during routine checks and supports a lean inspection flow. The combination of a defined M60×4 thread size and the DIN 13, 6g specification simplifies acceptance criteria and helps maintain throughput on production lines. Durable construction for repeatable measurements Manufactured from hardened gauge steel, the gauge resists wear and maintains dimensional stability under repeated use. The robust material choice and precision machining preserve the gauge’s form, which translates directly into fewer retests and less downtime. Supplied with a calibration certificate, the tool arrives ready for traceable quality checks, supporting documented inspection procedures and audit requirements within a quality management system. Designed for integration in quality routines and documentable results The compact verification method offered by this ring gauge minimises handling time and is suitable for workstation stations, goods‑in inspection or on-machine checks where a swift decision is required. The simple GO/NO-GO principle complements more detailed metrology equipment by providing a rapid first-line screening that prevents scrap and identifies parts needing further measurement. The included calibration documentation supports process control and archival of measurement evidence. Choose the Metav IndustryLine GO thread ring for reliable thread verification and request specification assistance from Metav Werkzeuge to ensure the gauge matches the inspection workflow at your site Technical Data Article number: M315.760.9 GTIN: 4054469155142 Tariff number: 90173000 Facts Thread size: M60×4 Weight: 1.8 kg Special features Material: gauge steel, hardened Type: GO (GUT) ring gauge Supplied with calibration certificate Standard: DIN 13, tolerance 6g FAQ What does the GO designation mean for this ring gauge? The GO designation indicates that this thread ring gauge verifies the maximum-material condition for an external metric thread; the Thread ring gauge GUT M60×4 is intended to fit correctly when a part meets the upper tolerance limit. Is a calibration document included with the gauge? Yes, the gauge is supplied with a calibration certificate, providing documented traceability for inspection records and quality audits. Which standard does the gauge conform to? The gauge is manufactured to DIN 13 with a 6g tolerance, suitable for verifying metric ISO fine threads to that specification. What material is the gauge made from and why does it matter? The ring is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure long-term repeatability in routine checks. Can this gauge be used on left‑hand threads? This specific item is a right‑hand Thread ring gauge GUT M60×4; left‑hand thread verification requires a corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x4 Thread Go Plug Gauge For Metric ISO Fine Thread, Right Hand, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Reliable inspection with hardened gauge steel, conformity to DIN 13, 6H and an included calibration certificate — order the Thread Go Plug Gauge GUT M60 x 4.0 directly via Metav Werkzeuge or ask our consultants if needed Thread Go Plug Gauge GUT M60 x 4.0 — Go gauge for metric ISO fine threads, right‑hand (Metav IndustryLine) The Thread Go Plug Gauge GUT M60 x 4.0 is a hardened go‑type plug gauge intended for the verification of right‑hand metric ISO fine threads according to DIN 13, 6H Hardened gauge steel construction Conforms to DIN 13, 6H Supplied with calibration certificate Designed for M60 x 4.0 right‑hand threads Ensure thread conformity with certified measurement The go‑type plug gauge serves as a direct, binary check: if the go gauge enters the thread smoothly, the internal thread meets the required minimum material and dimensional specifications; if not, the component requires rework. Manufactured from hardened gauge steel, the tool resists wear under repeated use and provides consistent tactile feedback during inspection. Compliance with DIN 13, 6H means the gauge matches established metric ISO fine‑thread tolerances, making the device suitable for routine quality control in production and incoming inspection. Using a calibrated plug gauge reduces uncertainty and shortens decision cycles on acceptance or rejection, increasing throughput without sacrificing traceability. Robust design for the shop floor and metrology room Built to withstand frequent handling, the plug gauge pairs a compact form with practical mass for stability; the specified weight supports steady engagement during manual inspection while remaining manageable for bench use. The choice of hardened gauge steel minimises abrasion and dimensional drift, so repeat measurements stay reliable over longer intervals. Its right‑hand thread geometry is standard for most fastener assemblies, allowing straightforward use in toolrooms, maintenance departments and assembly verification stations. The simple pass/fail check streamlines workflows and avoids time‑consuming adjustments on the production line. Calibrated delivery and traceable documentation Delivered with a calibration certificate, the gauge arrives ready for integration into documented quality systems; traceability is provided for audit purposes and supplier control. The calibration evidence supports internal inspection plans and external compliance checks, helping to demonstrate control over thread tolerances. As part of the Metav IndustryLine portfolio, the tool benefits from Metav’s quality filter in Emmerich, which emphasises consistent verification and accessible precision for workshops and industry alike. For companies seeking to reduce non‑conforming parts and strengthen process reliability, the calibrated go plug gauge is a practical, low‑complexity solution. Contact Metav Werkzeuge for a technical consultation or to request a quotation for the Metav IndustryLine Thread Go Plug Gauge GUT M60 x 4.0 — specialists at Metav Werkzeuge can advise on integration into existing inspection procedures and calibration options Technical data Article number: M315.560.9 GTIN: 4054469154787 Weight: 1.8 kg Material: Gauge steel, hardened Thread size: M60 x 4.0 Standard: DIN 13, 6H Facts Tariff number: 90173000 ECLASS: 21170228 Category: Gauges / Plug gauges Mass (kg): 1.8 Special features Go‑type plug gauge (G) Right‑hand metric ISO fine thread Supplied with calibration certificate Suitable for production and incoming inspection FAQ What does a go plug gauge verify? The Thread Go Plug Gauge GUT M60 x 4.0 verifies that an internal metric ISO fine thread is within the acceptable minimum material and dimensional tolerances defined by DIN 13, 6H; a smooth fit indicates conformity. Is this gauge supplied calibrated? Yes — the plug gauge is supplied with a calibration certificate, providing traceable measurement evidence for quality systems and audits. Where is this gauge typically used? This plug gauge is intended for production control, incoming inspection and workshop verification of M60 x 4.0 right‑hand metric threads, supporting quick pass/fail assessments. What material is the gauge made from? The gauge is made from hardened gauge steel, giving durable wear resistance and stable dimensional performance over repeated use. How should the plug gauge be handled and preserved? Handle the gauge with care, keep threads clean and dry, avoid impacts and store in a protected, low‑humidity environment to maintain dimensional stability and extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x4 Thread Go/No-Go Plug Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a robust inspection solution that combines no‑go control, hardened construction and a supplied calibration certificate for traceable verification. Order this precision gauge via Metav Werkzeuge or contact the consultants for application advice. No‑go thread plug gauge M60 x 4.0 (metric ISO fine thread, right‑hand) — Metav IndustryLine The no‑go thread plug gauge M60 x 4.0 is a right‑hand plug gauge designed for rapid pass/fail inspection of internal metric ISO fine threads in production and quality control environments. No‑go thread plug gauge for M60 x 4 Hardened gauge steel construction Conforms to DIN 13, 6H Delivered with calibration certificate Secure go/no‑go verification to reduce rework and scrap The principal function of this gauge is straightforward yet decisive: it provides an immediate pass/fail check for internal threads, preventing undersized or non‑conforming parts from entering assembly. As a no‑go member for M60 x 4.0 threads, the tool simplifies in‑process inspection and final checks by eliminating subjective judgement; measurements are reduced to a binary result that speeds line decisions and lowers downstream rework. The compliance with DIN 13, 6H ensures compatibility with standard metric ISO fine thread tolerances and supports documented quality procedures. Durable construction for consistent repeatability Manufactured from hardened gauge steel, the gauge is built to withstand daily shop use while maintaining dimensional stability. Robust material selection and heat treatment deliver predictable repeatability over prolonged service; the mass of 1.8 kg contributes to stable handling during inspection. A solid mechanical design reduces wear at the measuring flanks and keeps gauge‑related uncertainty low, which in turn supports reliable acceptance criteria and reduces the need for frequent replacement. Traceable calibration and straightforward integration into the workshop The gauge is supplied with a calibration certificate, providing traceability for audit and quality documentation. This certificate records the verification performed at delivery and facilitates integration into inspection routines and quality management systems. Supplied as a right‑hand no‑go plug for metric ISO fine threads, the instrument is ready for immediate use in standardised workflows and can be referred to in control plans and inspection work instructions. For specific applications and compatibility with existing fixtures, Metav Werkzeuge can advise on implementation and storage recommendations. Contact Metav Werkzeuge for application guidance or to request this Metav IndustryLine no‑go thread plug gauge (M315.660.9) from stock in Emmerich Technical data Article number: M315.660.9 GTIN: 4054469154961 Manufacturer: Metav IndustryLine Tariff number: 90173000 Facts Thread size: M60 x 4.0 Type: No‑go thread plug gauge (right‑hand) Mass: 1.8 kg Standard: DIN 13, 6H Special features Material: hardened gauge steel Delivered with calibration certificate Category: Thread gauges / Plug gauges Label: Gewinde-Lehrdorn AUSSCHUSS M 60 X 4,0 für metrisches ISO-Feingewinde, rechts FAQ What is the primary purpose of this gauge? The gauge is used as a no‑go plug for quick pass/fail inspection of internal M60 x 4.0 metric ISO fine threads, preventing non‑conforming parts from proceeding in production. Is the material suitable for regular workshop use? Yes, the plug is made from hardened gauge steel, offering wear resistance and stable dimensions for routine inspection tasks. Does the product include calibration documentation? A calibration certificate is supplied with the gauge; the certificate documents the verification performed and supports traceability in quality records. Which standard does the gauge comply with? The gauge is manufactured to DIN 13, 6H, matching the tolerance class for metric ISO threads as specified in the standard. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x5.5 Thread Go Ring Gauge, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise M60 x 5.5 mm thread verification, robust hardened gauge steel construction and conformity to DIN 13, 6g for reliable production control — order the gauge directly via Metav Werkzeuge or consult our advisors for application advice. Thread ring gauge M60 x 5.5 mm (Go) — Metav IndustryLine The thread ring gauge M60 x 5.5 mm (Go) is a right‑hand ISO metric acceptance gauge for quick verification of M60 × 5.5 threads in production and inspection environments. Precision gauge for M60 x 5.5 threads Manufactured to DIN 13, tolerance 6g Hardened gauge steel for durable use Ensure thread conformity for fewer rework cycles A dedicated thread ring gauge provides an unambiguous pass/fail check; the Go ring confirms that a thread meets the minimum dimensional requirements so assemblies fit without interference. Manufactured to DIN 13 with tolerance 6g, the gauge enables repeatable assessments of pitch diameter and form. Using a purpose‑made acceptance gauge reduces measurement interpretation and helps maintain a steady flow on the shop floor by preventing incorrectly sized components from progressing to assembly. Durable construction for long service life Made from hardened gauge steel, the ring resists wear and maintains form under frequent use, extending intervals between maintenance and replacement. The robust material and heat treatment ensure that the functional surfaces retain accuracy, which lowers total cost of ownership in the medium term. The solid construction also supports stable handling during rapid inspection cycles, reducing the risk of incidental deformation that would otherwise compromise measurement certainty. Simple integration into quality routines As a right‑hand, ISO‑metric Go ring, this gauge fits seamlessly into established quality control procedures for thread production, maintenance and incoming inspection. Its clear go/no‑go function accelerates decision making in busy operations and complements metrological equipment by separating quick accept checks from in‑depth verification tasks. Traceable documentation and consistent use of such gauges help demonstrate compliance during audits and reduce scrap rates through early detection. Typical applications and practical handling Ideal for machine and parts shops producing or checking large metric threads, the gauge is suited to workshop inspection benches and production lines alike. The compact ring form enables rapid engagement with threaded parts and is straightforward to store when not in use. For efficient use, pair the gauge with documented inspection steps and periodic verification against a master reference to sustain confidence in results across production batches. Contact Metav Werkzeuge today to discuss specifying the Metav IndustryLine thread ring gauge M315.160 for your inspection programme or to request a tailored quotation — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.160 GTIN: 4054469125251 Thread size: M60 x 5.5 mm Facts Weight: 2.2 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13, tolerance 6g Thread direction: right‑hand Type: Go (acceptance) thread ring gauge Category: gauges, thread inspection FAQ What is the intended use of this ring gauge? The thread ring gauge M60 x 5.5 mm (Go) from Metav IndustryLine is designed for acceptance testing of M60 × 5.5 ISO metric right‑hand threads to confirm they meet minimum dimensional requirements. Which standard and tolerance does the gauge comply with? This ring gauge is manufactured to DIN 13 and specified for tolerance class 6g, ensuring compatibility with standard ISO metric thread specifications. What material is the gauge made from and how does that affect durability? Constructed from hardened gauge steel, the gauge offers improved wear resistance and dimensional stability under repeated use, extending service life and maintaining reliable inspection performance. Is this gauge suitable for production line inspections? Yes, the Go acceptance function makes the ring gauge suitable for fast in‑process checks on production lines, enabling quick go/no‑go decisions without replacing more detailed measurement instruments. What is the manufacturer SKU for ordering and identification? The product is listed as M315.160 and marketed under Metav IndustryLine for straightforward ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x5.5 Thread Go Ring Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of fast, unambiguous go/no‑go inspection with a No‑Go thread ring made from hardened gauge steel, specified to DIN 13, tolerance 6g, and sized for M60 × 5.5 mm metric ISO threads; ideal for production quality checks and incoming inspection. Order this gauge directly via Metav Werkzeuge or contact the consultants for application advice. Thread ring gauge M60 × 5.5 mm — No‑Go, Metav IndustryLine Thread ring gauge M60 × 5.5 mm for right‑hand metric ISO threads, constructed for rapid pass/fail inspection in production and quality control environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6g No‑Go ring for M60 × 5.5 mm threads Ensure consistent thread quality at production speed A dedicated No‑Go ring provides an immediate, objective check that a threaded part is not oversized. By comparing a component directly to a hardened working gauge, inspection is reduced to a single physical test that removes interpretation and accelerates throughput. The combination of DIN 13 specification and 6g tolerance class means the gauge is matched to recognised metric ISO standards, providing clear acceptance criteria that integrate effortlessly into manufacturing quality plans. Durable build for frequent shop‑floor use Manufactured from hardened gauge steel, the ring resists wear and maintains form over long service intervals, reducing the need for frequent replacement. The material choice preserves the reference profile against abrasive contact and repeated engagement, which is essential when many checks are made daily. This robustness translates into lower total cost of ownership because inspection tools remain reliable over extended production cycles. Clear function: immediate pass/fail results As a No‑Go device, the ring signals rejection the moment an out‑of‑tolerance thread passes the limit; this direct approach avoids time‑consuming measurements and complex interpretation. The tool is optimised for rapid decision making during incoming inspection, batch sampling or finished‑part verification, helping to prevent non‑conforming parts from progressing down the line and reducing rework and scrap rates. Application scope and integration with quality systems Designed for right‑hand metric ISO threads of size M60 × 5.5 mm, the gauge suits medium and heavy engineering contexts where large threaded fittings, housings or flanges are produced. Its standardised form factor allows easy inclusion in control plans and visual inspection stations, and it works alongside other calibrated gauges to build a coherent measurement strategy across production and maintenance tasks. Metav IndustryLine tools are supplied as part of a broader precision offering that helps workshops and factories maintain reliable measurement routines. Choose the Metav IndustryLine No‑Go thread ring for decisive, standard‑matched thread validation and contact Metav Werkzeuge for procurement or technical clarification by phone or email Technical data Article number: M315.260 GTIN: 4054469126913 eClass: 21170214 Data Size: M60 × 5.5 mm Standard: DIN 13, tolerance 6g Customs tariff number: 90173000 Special features Material: gauge steel, hardened Type: No‑Go thread ring (reject gauge) Thread direction: right‑hand Category: Gauges / Thread gauges FAQ What is the purpose of a No‑Go thread ring? A No‑Go ring instantly indicates whether a thread exceeds permitted limits; the Metav IndustryLine No‑Go thread ring M60 × 5.5 mm (SKU M315.260) rejects oversized threads at a single check. Which standard does this gauge follow? The ring is manufactured to DIN 13 with a 6g tolerance class, ensuring compatibility with the metric ISO thread form used in industrial production. What material is the gauge made from and why? The gauge is made from hardened gauge steel to provide wear resistance and dimensional stability during repetitive shop‑floor inspection. Can this ring be used for left‑hand threads? This specific ring is produced for right‑hand metric ISO threads; left‑hand applications require a dedicated left‑hand gauge. How should the No‑Go result be interpreted during inspection? If the No‑Go ring enters the thread, the part is out of tolerance and must be rejected; if it does not enter, the thread size is within the maximum material condition defined for the gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M60x5.5 Thread Go/No-Go Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of precise, repeatable thread checks and a hardened gauge-steel construction that keeps inspection fast and reliable; order the limit thread plug gauge directly via Metav Werkzeuge or ask the consultants for application advice. Limit thread plug gauge M60 x 5.5 mm (metric ISO, right-hand) — Metav IndustryLine A limit thread plug gauge M60 x 5.5 mm for quick verification of metric ISO right-hand threads in production and workshop quality control Hardened gauge steel for durable measurements Conforms to DIN 13, tolerance 6H Right-hand metric ISO thread M60 x 5.5 Robust design for repeatable go/no-go checks Consistent thread verification for production A limit-thread gauge from Metav IndustryLine provides a rapid and reliable method for checking internal thread acceptability. The tool is designed as a go/no-go instrument so that conformity with the M60 x 5.5 mm metric ISO thread is verified in a single operation, reducing inspection time and lowering the risk of accepting out-of-spec parts. Using a dedicated plug-style gauge ensures repeatability across shifts and operators by offering an unambiguous pass/fail check. Durability and workshop handling Manufactured from hardened gauge steel, the gauge resists wear under frequent use and maintains dimensional integrity over prolonged inspection cycles. The compact, solid design supports robust handling in busy shop-floor environments and simplifies storage in inspection cabinets. Because the gauge is a fixed-limit device, calibration intervals and wear monitoring are straightforward to schedule, which helps preserve measurement reliability without complex procedures. Standards conformity that reduces rework Engineered to DIN 13 with a tolerance class 6H, the gauge aligns with common European thread-specification practice and integrates smoothly into established quality routines. Right-hand metric ISO threads are directly addressed, enabling rapid compatibility checks for incoming parts, assemblies and maintenance tasks. The clear standard conformity supports traceability in inspection records and helps to reduce scrap rates by catching thread faults early in the process. Choose Metav IndustryLine for dependable thread inspection; contact Metav Werkzeuge in Emmerich for technical alignment and ordering support Technical Data Article number: M315.060 GTIN: 4054469123585 Material: hardened gauge steel Standard: DIN 13, 6H Thread: M60 x 5.5 mm, metric ISO, right-hand Customs tariff number: 90173000 Facts Tolerance class: 6H Thread pitch: 5.5 mm Product type: limit thread plug gauge SKU: M315.060 Special features Go/no-go inspection functionality Suitable for production and workshop use Robust, single-piece construction Conforms to metric ISO thread specifications FAQ What thread size and pitch does the gauge check? The limit thread plug gauge checks the M60 x 5.5 mm metric ISO thread, with a 5.5 mm pitch as indicated on the product specification. Which standard does the gauge comply with? The gauge is manufactured to DIN 13 and is issued in tolerance class 6H, matching common industrial thread specifications. Is the gauge suitable for production-line checks? Yes. The go/no-go design of the gauge is intended for frequent production and workshop inspections where rapid pass/fail decisions are required. What material is used for the gauge construction? The tool is made from hardened gauge steel, chosen for wear resistance and dimensional stability under regular use. How should wear and calibration be managed? Regular visual checks and scheduled calibration are recommended; the fixed-limit design simplifies wear assessment and helps plan replacement before measurement drift affects quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x1.5 Thread Go Plug For Metric ISO Fine Thread, Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise thread verification, robust hardened gauge steel, and a supplied calibration certificate for traceable inspection results; order directly via Metav Werkzeuge or consult our specialists for application advice. Go thread plug gauge M62 x 1.5 (right-hand) – calibrated, hardened gauge steel (Metav IndustryLine) The Go thread plug gauge M62 x 1.5 is a right-hand metric ISO fine-thread gauge designed for production inspection and fast go/no-go checks in workshop and quality environments Calibrated with certificate included Hardened gauge steel construction Conforms to DIN 13, tolerance class 6H Right-hand ISO fine thread M62 × 1.5 Consistent accuracy and traceability for production control This Go thread plug gauge is supplied with a calibration certificate, enabling documented traceability for inspection records and quality audits. The gauge follows DIN 13, 6H, which defines the thread form and tolerance class for metric ISO fine threads; conformity with this norm ensures compatibility with standardised components. The calibrated status removes ambiguity during incoming inspection and supports repeatable acceptance criteria, reducing rework and inspection disputes. Durable construction that withstands workshop use Manufactured from hardened gauge steel, the plug gauge is built for long service life and stable performance under frequent handling. The robust material increases wear resistance and preserves the gauging margin over extended use, while the compact form factor aids quick insertion and extraction during routine checks. With a practical mass of 1.8 kg, the tool provides a solid feel that supports confident manual inspection without excessive bulk. Practical function and application in quality workflows As a Go plug gauge for an ISO fine thread, the instrument verifies minimum material and correct pitch: a smooth entry indicates the internal thread meets the Go condition set by the standard. The right-hand thread designation and M62 × 1.5 sizing make it suitable for medium-to-large components in assemblies, housings and flanged connections. In production, the gauge streamlines pass/fail decisions at the workbench or inspection station, speeding up batch acceptance without sacrificing measurement integrity. Contact Metav Werkzeuge for tailored advice from our Emmerich depot and to arrange supply of the Go thread plug gauge directly from our stock (info@metav-werkzeuge.com | +49 2822 7131930) Technical Data Article number: M315.562.6 GTIN: 4054469152080 Customs tariff number: 90173000 Facts Thread: M62 × 1.5 Weight: 1.8 kg Tolerance class: 6H Special features Material: hardened gauge steel Type: Go thread plug gauge Right-hand thread Supplied with calibration certificate Standard: DIN 13 FAQ What does the calibration certificate cover? The calibration certificate confirms that the Go thread plug gauge M62 × 1.5 has been inspected and documented to ensure its dimensions and form meet the stated specifications for traceability. Can this gauge be used for acceptance testing on production batches? Yes, the gauge is intended for production inspection and quick go/no-go acceptance of internal metric ISO fine threads in accordance with DIN 13, tolerance class 6H. Is the material suitable for repeated use in a workshop environment? The hardened gauge steel construction is selected to resist wear during frequent checks, preserving gauging capacity and prolonging service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x1.5 Thread Go Ring Gauge, Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated - Metav IndustryLine
Take advantage of a factory‑calibrated Go thread ring gauge with standardised tolerance class and hardened construction to secure repeatable acceptance checks on metric ISO fine threads; purchase directly from Metav Werkzeuge or consult the Metav team for application advice. Thread ring gauge GUT M62 x 1.5 – Go gauge, metric ISO fine thread, right‑hand The Thread ring gauge GUT M62 x 1.5 is a right‑hand Go (GUT) ring gauge for fast accept/reject checks of metric ISO fine threads in production and inspection environments Factory calibrated with certificate Hardened gauge steel construction DIN 13 tolerance class 6g Metric ISO fine thread M62 x 1.5 Assured conformity and measurable quality The ring is manufactured to DIN 13 (6g), which provides a clear, industry‑recognised acceptance limit for metric fine threads. Built as a Go ring gauge, it enables rapid go/no‑go assessments that reduce cycle time in quality control while keeping decision criteria traceable. The delivery includes a calibration certificate, ensuring documented measurement traceability and supporting internal audit processes. These attributes together lower the risk of ambiguous inspections and support predictable production yields. Robust design for long service life and repeatability Constructed from hardened gauge steel, the gauge resists wear and maintains form stability during repeated engagement with threaded parts. The material choice and manufacturing tolerances reduce dimensional drift, which preserves repeatability across inspection cycles and prolongs interval between replacements. The compact, balanced mass (approx. 1.8 kg) provides comfortable handling for bench or inline checks without compromising the gauge’s rigidity or the operator’s control. Practical use in shopfloor and inspection labs The device suits inline sampling and final inspection in machining and assembly workflows where metric ISO fine threads must meet specification. As a Go gauge, it is used to confirm that a thread is within the allowable maximum material limit by screwing onto the test part; a secure fit indicates conformity. The combination of standard tolerancing and an included calibration document simplifies integration into existing inspection instructions and quality documentation, helping to streamline the acceptance process and support compliance practices. Contact Metav Werkzeuge for tailored advice on the GUT M62 x 1.5 ring gauge and arrange delivery from Emmerich with full calibration documentation. Technical data Article number: M315.762.6 GTIN: 4054469152561 Label: Thread ring gauge GUT M62 x 1.5, right‑hand Facts Size: M62 x 1.5 Weight: 1.8 kg Tariff number: 90173000 ECLASS: 21170214 Special features Material: hardened gauge steel Tolerance class: DIN 13, 6g Calibration: delivered with calibration certificate Gauge type: Go (GUT), right‑hand thread Category: Gauges / Inspection rings FAQ What thread size and pitch does this gauge check? The gauge checks metric fine threads of M62 x 1.5; the specification is stated on the Thread ring gauge GUT M62 x 1.5. Is the gauge delivered with traceable calibration? Yes, the ring gauge is supplied with a calibration certificate confirming the delivered condition and traceability for inspection records. What does the designation DIN 13, 6g mean for acceptance? DIN 13 with tolerance class 6g defines the dimensional acceptance limits for the tested metric ISO fine thread; the Go gauge is produced to that class for consistent go/no‑go checks. How is a Go ring gauge used in practice? The Go ring gauge is screwed onto the threaded part; a correct fit without excessive play indicates the thread is within the allowed maximum material limits defined by the applicable standard. Can this gauge be used for serial inspection on the shopfloor? Yes, the hardened construction and standardised tolerance class make it suitable for repetitive acceptance checks in production sampling and final inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x1.5 Thread Go/No-Go Plug Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge, Calibrated Certificate - Metav IndustryLine
Take advantage of hardened gauge steel, compliance with DIN 13 (6H) and the included calibration certificate for reproducible thread inspection results; order directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge (no‑go) M62×1.5 — No‑go thread plug gauge, DIN 13, Metav IndustryLine Thread plug gauge (no‑go) M62×1.5 designed for fast verification of metric ISO fine threads in production and quality control Hardened gauge steel construction Calibrated with certificate included Conforms to DIN 13, tolerance 6H Right‑hand metric fine thread M62×1.5 Consistent rejection criteria to protect production quality A dedicated no‑go thread plug gauge provides an immediate, mechanical check that threads exceeding the upper tolerance limit are identified before assembly. Manufactured from hardened gauge steel, this inspection tool resists wear and preserves dimensional integrity during repeated use, which reduces the need for frequent replacement and keeps process variability low. Built to DIN 13 (6H), the gauge matches established industry tolerances for metric fine threads, enabling clear go/no‑go decisions on the shop floor and supporting consistent component quality. Traceable calibration for audit‑ready measurement Supplied with a formal calibration certificate, the gauge ensures traceability and documentation for quality management systems and inspections. Calibration confirms the tool meets specification at the point of delivery and provides evidence for internal audits and customer queries. The gauge’s robust material and the certification together reduce the risk of undetected deviations, helping to lower scrap rates and rework costs while supporting long‑term process stability. Simple integration into workshop inspection routines The right‑hand M62×1.5 configuration integrates directly into existing fixture checks and manual inspection stations without additional adapters. Its compact form and clear pass/fail function mean operators can perform rapid checks inline, minimising cycle interruptions. Identification and ordering are straightforward thanks to the assigned SKU and GTIN, and the gauge’s substantial mass contributes to a feel of solidity and control during inspection operations. For critical applications, this no‑go plug gauge complements higher‑resolution measuring instruments by providing a quick and unambiguous acceptance criterion. For certified thread inspection using Metav IndustryLine’s no‑go thread plug gauge M62×1.5, contact Metav Werkzeuge for availability and technical guidance: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; email info@metav-werkzeuge.com; phone +49 2822 7131930 Technical Data Article number: M315.662.6 GTIN: 4054469152325 SKU: M315.662.6 Weight: 1.8 kg Facts Thread size: M62×1.5 Thread direction: right‑hand Standard: DIN 13, 6H Tariff number: 90173000 Special features Material: gauge steel, hardened Delivery: calibration certificate included Type: no‑go (reject) thread plug gauge Category: thread inspection gauge FAQ Is this gauge suitable for fine metric threads? Yes. The no‑go thread plug gauge M62×1.5 is specified for metric ISO fine threads and manufactured to DIN 13 (6H) to match the required tolerance class. Does the gauge come calibrated? A calibration certificate is supplied with the gauge, confirming its conformity at delivery and providing traceability for quality records. What does the no‑go function check? The no‑go plug detects threads that exceed the upper tolerance limit; if the plug does not enter, the thread passes the check for maximum material condition. What material is the gauge made from and why does it matter? Constructed from hardened gauge steel, the gauge resists wear and maintains dimensional stability during repeated inspections, supporting long service life and measurement reliability. Can this gauge be used in automated inspection systems? The gauge is primarily designed for manual go/no‑go verification; integration into automated systems depends on the cell design and handling equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x2 Thread Go Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a rugged, standards‑compliant inspection tool that combines DIN 13 (6g) conformity, hardened gauge steel construction, and an included calibration certificate for immediate traceability in the measuring process. Order the gauge directly via Metav Werkzeuge or consult the Metav team for application advice. GO thread ring gauge M62 x2.0 — right‑hand ring gauge by Metav IndustryLine The GO thread ring gauge M62 x2.0 is a precision inspection ring gauge for verifying metric ISO fine threads (right‑hand), designed for production control and final acceptance testing. GO ring gauge M62×2.0, right‑hand thread Hardened gauge steel for wear resistance Conforms to DIN 13, tolerance class 6g Supplied with calibration certificate Confidence in process control through standard‑led inspection The GO ring provides a clear and objective acceptance criterion during in‑line and final inspection. Manufactured from hardened gauge steel, the ring resists wear and maintains form under repeated use, which reduces rework and downtime. Compliance with DIN 13 and the 6g tolerance class ensures compatibility with standardised production and inspection routines, simplifying quality documentation and supplier audits. The robust material choice and tight tolerance control translate directly into reliable pass/fail decisions on the shop floor. Traceability and calibration for audit‑ready measurements Supplied with a calibration certificate, the gauge enters service with documented traceability, supporting traceable measurement chains and quality management systems. The certificate confirms the ring’s conformity at the time of issue and can be filed within quality records, aiding conformity assessments during audits. For organisations that require documented evidence of measurement capability, the included paperwork removes additional processing steps and accelerates deployment in inspection stations. Practical advantages for workshop and laboratory use The compact, single‑function design of the GO ring promotes ease of use in repeated checks: operators can perform rapid go/no‑go tests without elaborate setups, which speeds throughput in repetitive controls. The right‑hand M62×2.0 geometry matches common fine‑pitch metric applications in mechanical assemblies and transmission components, making the gauge a practical tool for maintenance, incoming inspection and production sampling. Durable construction minimises frequency of replacement, supporting a cost‑effective inspection routine. Integration into a quality‑centred supply chain Using a standardised ring gauge reduces ambiguity between supplier and purchaser specifications; a GO result on this gauge signals conformity to the declared metric ISO fine thread parameters. As part of a coherent metrology strategy, the gauge complements thread masters and functional test fixtures, enabling quick decisions and lowering the risk of non‑conforming parts progressing through assembly. Metav IndustryLine’s offering emphasises consistent quality and practical usability for industrial environments. Contact Metav Werkzeuge today for application guidance or to order this Metav IndustryLine ring gauge — email info@metav-werkzeuge.com or call +49 2822 7131930 for local supply and technical advice. Technical Data Article number: M315.762.7 GTIN: 4054469153636 Tariff number: 90173000 Weight: 1.8 kg Facts Thread size: M62 × 2.0 Tolerance class: 6g Standard: DIN 13 Special features Material: hardened gauge steel Type: GO (acceptance) ring gauge, right‑hand thread Supplied with calibration certificate (traceability documented) FAQ What is the intended use for this ring gauge? The GO thread ring gauge M62 x2.0 by Metav IndustryLine is intended for go/no‑go inspection of metric ISO fine threads in production control and final inspection. Does the gauge come calibrated? Yes, the gauge is supplied with a calibration certificate confirming the calibration status at delivery for the Metav IndustryLine GO thread ring gauge M62 x2.0 (SKU M315.762.7). Which standard does the gauge comply with? The ring gauge conforms to DIN 13 with tolerance class 6g, ensuring compatibility with standard metric ISO fine‑thread specifications. What material is used for the gauge and why does it matter? The gauge is made from hardened gauge steel; this material provides wear resistance and stable form retention, which is important for repeatable inspection performance. Can this gauge be used for left‑hand threads? No, this GO ring gauge is manufactured for right‑hand threads only; left‑hand applications require the corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x2 Thread Go Ring, Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
The hardened construction and DIN 13, 6g compliance ensure reliable go/no‑go assessment for M62 x 2.0 threads; supplied with a traceable calibration certificate, the gauge supports consistent quality control. Order the calibrated ring gauge directly via Metav Werkzeuge or consult the sales team for specification matching. No‑Go Thread Ring Gauge M62 x 2.0 — right‑hand, hardened gauge steel (Metav IndustryLine) The No‑Go Thread Ring Gauge M62 x 2.0 serves as a dedicated right‑hand metric ISO fine‑thread check for quick acceptance and reject decisions in production and incoming inspection. Hardened gauge steel construction For M62 x 2.0 metric ISO fine thread Supplied with calibration certificate Conforms to DIN 13, 6g Fast, repeatable go/no‑go verification for production lines Designed for routine thread inspection, this ring gauge gives a clear pass/fail decision within seconds. The hardened gauge steel body resists wear and maintains dimensional stability, which reduces recalibration frequency and keeps downtime low. Conformity with DIN 13, 6g means inspection results integrate directly into standardised production documentation, supporting traceable quality routines. The robust design makes the gauge a reliable tool for high‑throughput environments where quick verification translates into measurable productivity gains. Minimise uncertainty with traceable calibration Supplied with a factory calibration certificate, the instrument is ready for immediate use in quality systems that require documented measurement traceability. The certificate records the gauge status at delivery and can be archived for audits, removing ambiguity during inspections. Its role as a no‑go (reject) ring gauge provides a conservative check that prevents out‑of‑tolerance parts from progressing through assembly, thereby protecting downstream processes and reducing rework costs. Built for workshop durability and simple integration The compact, single‑purpose geometry simplifies training and reduces operator error compared with complex measurement tasks. The right‑hand thread configuration matches standard threaded components, enabling quick checks without additional adapters. Weight and balance deliver a tactile feel that supports confident handling during repetitive checks, and the plain design allows the gauge to be stored alongside other inspection tools for a coherent metrology set‑up in the workshop or receiving bay. For calibrated, production‑ready gauges from Metav IndustryLine and personalised procurement advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss supply and specification matching Technical data Article number: M315.862.7 GTIN: 4054469153841 Designation: No‑Go thread ring gauge M62 x 2.0 SKU: M315.862.7 Facts Weight: 1.8 kg Standard: DIN 13, 6g Size: M62 x 2.0 Special features Material: gauge steel, hardened Supplied with calibration certificate Right‑hand metric ISO fine thread Designed as no‑go (reject) ring gauge eClass: 21170214 FAQ What is the primary application of this ring gauge? The No‑Go Thread Ring Gauge M62 x 2.0 is used for go/no‑go inspection to verify whether M62 x 2.0 metric ISO fine threads are within tolerance; it is intended for production and incoming quality control. Is the gauge delivered calibrated? Yes, this Metav IndustryLine no‑go gauge is supplied with a calibration certificate that documents the measurement status at delivery for traceability. Which standard does the gauge conform to? The ring gauge conforms to DIN 13, 6g, ensuring compatibility with common metric ISO fine‑thread specifications. Can the gauge be used on both right‑ and left‑hand threads? This particular ring gauge is manufactured for right‑hand threads; left‑hand versions must be ordered separately if required. What material and durability characteristics does the gauge offer? Made from hardened gauge steel, the gauge resists wear and maintains dimensional stability for extended inspection intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x2 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread, Right Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, precise DIN 13 (6H) tolerance and the stable M62 x 2 mm geometry to secure reproducible thread checks in production. Order the gauge directly via Metav Werkzeuge or consult the Metav team for application support. Limit thread plug gauge M62 x 2 mm — right‑hand, DIN 13 (6H) — Metav IndustryLine The Limit thread plug gauge M62 x 2 mm is a right‑hand plug gauge for quick verification of metric ISO fine threads in production inspection and incoming goods control. Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6H Right‑hand M62 x 2 mm metric fine thread Robust 1.8 kg construction for stable handling Reliable first‑pass thread verification for production lines A limit thread plug gauge is designed to give an immediate go/no‑go indication for internal threads; this means rapid acceptance or rejection without measurement interpretation. Manufactured from hardened gauge steel, the instrument delivers wear resistance and dimension stability, which preserves the calibrated limits over many cycles. Conformity to DIN 13 and the 6H tolerance class ensures compatibility with common ISO metric fine‑thread specifications, making the gauge suitable for quality assurance in machine shops and component suppliers. The compact, robust design reduces handling uncertainty and supports efficient throughput in batch inspections. Consistent handling and repeatability for shop‑floor use The gauge’s mass and geometry — approximately 1.8 kg with an M62 x 2 mm thread — provide stable contact during verification, reducing the risk of misalignment that can occur with lighter tools. Built for routine use, this right‑hand plug gauge helps standardise the inspection step: the favourable centre of gravity and solid construction assist operators in achieving repeatable tactile feedback when checking threaded bores. By using a dedicated limit gauge instead of comparative measuring, process control becomes faster and less dependent on operator interpretation, which in turn reduces rework and streamlines quality workflows. Integration into quality systems and inspection routines The limit plug gauge is straightforward to include in visual inspection jigs, portable check kits or fixed test benches for incoming inspection. Traceable identification such as article and batch numbers supports record keeping; the robust material choice minimises drift between checks and extends service intervals. For operations seeking consistent acceptance criteria, the gauge offers a durable physical reference that complements measuring instruments and digital inspection reports. When paired with Metav’s product support, it forms part of a pragmatic approach to maintaining reliable thread quality across production stages. Contact Metav Werkzeuge today for tailored advice on integrating this Metav IndustryLine gauge into inspection routines or to confirm current stock and delivery options Technical data Article number: M315.062.7 GTIN: 4054469123615 SKU: M315.062.7 Material: gauge steel, hardened Thread: M62 x 2 mm Standard: DIN 13, tolerance 6H Weight: 1.8 kg Tariff number: 90173000 Numbers / Core technical data Thread size: M62 × 2 mm Mass: 1.8 kg Tolerance class: 6H Applicable standard: DIN 13 Special features Right‑hand metric ISO fine thread checking Limit (go/no‑go) plug gauge function Hardened construction for wear resistance Category: gauges / thread inspection tools FAQ What does a limit thread plug gauge check? A limit thread plug gauge verifies whether an internal thread falls within prescribed go/no‑go limits; the Limit thread plug gauge M62 x 2 mm provides an immediate acceptance or rejection result for M62 × 2 internal threads. Is this gauge suitable for production‑level repetitive checks? Yes — the hardened gauge steel construction and stable geometry make the Metav IndustryLine plug gauge appropriate for repetitive shop‑floor inspections and incoming goods control. Which tolerance and standard does the gauge comply with? The gauge is manufactured to DIN 13 and is classed to tolerance 6H, matching common ISO metric fine‑thread specifications. Can this gauge be used for left‑hand threads? No — this specific item is a right‑hand plug gauge designed for right‑hand metric ISO fine threads; left‑hand versions must be ordered separately. How should the gauge be stored to maintain accuracy? Store the gauge in a clean, dry environment away from mechanical shocks; regular visual inspections will help maintain the tool’s condition and repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x2 Thread Go/No-Go Ring Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H With Calibration Certificate - Metav IndustryLine
Compact inspection solution combining DIN-compliant accuracy, hardened gauge-steel construction and a supplied calibration certificate; order the plug gauge directly via Metav Werkzeuge or consult our metrology specialists for application advice. Thread plug gauge M62×2 (no-go) — Metav IndustryLine, DIN 13 / 6H The Thread plug gauge M62×2 (no-go) is a hardened plug gauge designed for rapid rejection checks of metric ISO fine threads in incoming inspection and process control. No-go plug gauge for M62×2 metric fine threads Hardened gauge steel construction Supplied with calibration certificate Manufactured to DIN 13, 6H standard Ensure rejection limits are detected reliably on the shop floor A purpose-designed no-go plug gauge gives clear, unambiguous results during thread inspection, reducing the time spent on secondary checks and rework. Made from hardened gauge steel, this gauge resists wear in continuous use and preserves the inspection limit. Conformity to DIN 13, 6H ensures the gauge matches the nominal tolerance class for metric ISO fine threads, so decision-making in quality control is based on recognised standards rather than approximation. Built for traceable quality assurance and simple integration Delivered with a calibration certificate, the tool enters the inspection routine ready for traceable use in production or incoming goods testing. The certificate documents the gauge status at delivery and supports audit trails; it is particularly useful for regulated environments and supplier qualification. The compact, single‑piece plug gauge format is straightforward to use during routine checks and integrates seamlessly into existing go/no‑go stations without additional setup. Practical benefits for repetitive inspections and process control Using a dedicated reject gauge for M62×2 threads shortens inspection cycles and reduces operator uncertainty: a clear no‑go condition prevents flawed parts from entering the next process stage. The gauge’s robust design and the choice of gauge steel maintain dimensional stability under frequent handling, contributing to consistent results and lower lifetime cost for the inspection toolset. Lightweight portability supports shift‑to‑shift rotation and easy storage when not in use. Choose the Metav IndustryLine no-go thread plug gauge for dependable rejection checks and contact Metav Werkzeuge for procurement and technical consultation — info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: M315.662.7 GTIN: 4054469153254 Designation: Thread plug gauge no-go M62×2 Weight: 1.8 kg Core specifications Thread size: M62×2 Direction: Right-hand thread Standard: DIN 13, 6H Tariff number: 90173000 Special features Material: Hardened gauge steel Function: No-go (reject) plug gauge for metric ISO fine threads Supplied with calibration certificate Category: Gauges / plug gauges FAQ What does "no-go" mean for this plug gauge? A no-go plug gauge indicates whether a threaded part exceeds the maximum acceptable size; if the Thread plug gauge M62×2 (no-go) enters the thread, the part fails the rejection criterion. Is the gauge ready for traceable inspection on delivery? Yes, the gauge is supplied with a calibration certificate documenting its measured condition at delivery, enabling immediate traceable use in quality procedures. Which thread standard does this gauge check against? The gauge is manufactured to DIN 13, 6H, matching the tolerance class used for metric ISO fine threads and supporting standardised inspection routines. What material is the gauge made from and why does it matter? Constructed from hardened gauge steel, the tool offers wear resistance and dimensional stability, ensuring repeatable results over extended use in production environments. Can this gauge be used for process control as well as incoming inspection? Yes; the robust design and clear go/no‑go function make the gauge suitable both for incoming goods inspection and for in‑process checks where quick rejection decisions are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x2 Thread Plug Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Ensure consistent thread quality with DIN 13 6H tolerance and hardened gauge steel, supplied with a calibration certificate for traceability and documented inspection results. Order the plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M62 x 2.0 (M315.562.7) — Metric ISO fine thread, right-hand Thread plug gauge GUT M62 x 2.0 for fast go/no-go verification of metric ISO fine threads in production and incoming inspection GO plug gauge for metric fine threads Conforms to DIN 13, tolerance 6H Hardened gauge steel for long life Incl. calibration certificate for traceability Precise control for fine-pitch metric threads The M62 x 2.0 plug gauge delivers a clear, binary inspection result for metric ISO fine threads, ensuring parts meet the DIN 13 specification and the 6H tolerance class. As a go gauge, it verifies the minimum material condition and thread form required for acceptance; this removes ambiguity from visual checks and reduces cycle time at the inspection station. The binary nature of a plug gauge simplifies sampling plans and supports consistent quality decisions during series production or at goods receipt. Robust construction for repetitive shop-floor use Manufactured from hardened gauge steel, the gauge resists wear while retaining dimensional stability under repeated use, which reduces replacement frequency and supports predictable maintenance intervals. The right-hand thread geometry and compact design make the gauge straightforward to handle, while the mass and balance aid secure seating during verification. Supplied with a calibration certificate, the tool arrives ready for traceable use in quality assurance routines and documentation chains. Designed for efficient integration into quality workflows The plug gauge suits both production controls and incoming inspection: insert the plug gauge into the threaded component and accept parts that pass the go check without further measurement. This quick verification method complements longer-form metrological checks and frees up measuring equipment for critical measurements. The included documentation supports audit trails and facilitates conformity records for suppliers and internal quality systems, helping to maintain throughput without compromising traceability. For dependable thread inspection choose the Metav IndustryLine M315.562.7 plug gauge with calibration certificate — contact Metav Werkzeuge in Emmerich for application guidance or to arrange procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.562.7 GTIN: 4054469153049 eCl@ss: 21170228 Customs tariff number: 90173000 Facts Thread size: M62 x 2.0 Tolerance class: 6H Weight: 1.8 kg Hand: Right-hand Special features Material: hardened gauge steel Norm: DIN 13 Type: GO (GUT) plug gauge Incl. calibration certificate FAQ What does the GO designation mean for this plug gauge? The GO designation indicates that the gauge is a go plug used to verify that internal threads meet the minimum acceptance form; the Metav IndustryLine plug gauge M315.562.7 confirms that the thread is within the required tolerances for a go condition. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate, which documents the inspection and provides traceability for quality records. For which applications is the M62 x 2.0 gauge intended? This plug gauge is intended for production control, incoming inspection and routine checks of metric ISO fine threads where conformity to DIN 13 and the 6H tolerance is required. How does the gauge material affect service life? Constructed from hardened gauge steel, the gauge offers higher wear resistance and dimensional stability under repeated use, extending service life compared with non-hardened tools. Can this gauge be used for left-hand threads? No, this specific item is a right-hand plug gauge; left-hand thread checks require a corresponding left-hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x2 Thread Ring Gauge Go Right-Handed, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 tolerance, hardened gauge steel construction and a stable 2.3 kg mass for reproducible thread acceptance testing; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Go Ring M62 x 2 mm — Go ring gauge, DIN 13, hardened gauge steel (Metav IndustryLine) The Thread Go Ring M62 x 2 mm is a right‑hand ring gauge for rapid verification of metric ISO fine external threads in production and quality control environments. DIN 13 tolerance class 6g Hardened gauge steel construction For metric ISO fine thread M62×2, right‑hand Robust 2.3 kg mass for stable handling Reliable acceptance testing for external threads A dedicated go ring gauge is the simplest and fastest method to confirm whether an external thread meets specification. Manufactured to DIN 13 with a 6g tolerance, this ring provides an unequivocal go/no‑go decision for external threads of the specified form. The gauge eliminates interpretation uncertainty common to manual inspection methods and supports repeatable sampling across batches, reducing rework rates and keeping assembly lines moving. Robust design for workshop and production use Constructed from hardened gauge steel, the ring is built for everyday use in busy workshops and inspection rooms. The unit's 2.3 kg mass and solid form factor give a stable feel during handling and help maintain concentric engagement with the test thread, which benefits both speed and accuracy of the check. The right‑hand orientation is matched to standard metric ISO fine threads, making it suitable for direct acceptance testing of turned and machined components. Clear material and maintenance guidance The choice of hardened gauge steel minimises wear and preserves the reference profile under normal use; regular cleaning with a lint‑free cloth and light corrosion protection will extend service life. Avoid impacts and do not use the ring for alignment under load. If transport or storage is required, use a padded box to prevent nicks and preserve measurement reliability. Routine visual checks for burrs or damage are sufficient to decide whether the gauge remains serviceable. Practical application and inspection workflow This ring is intended for go checks on external threads to confirm conformity with the nominal size M62×2 and the specified tolerance class. In a typical workflow the gauge is applied to a finished thread: a free, smooth engagement indicates acceptance; resistance or blockage signals deviation and triggers further measurement or rework. Using a dedicated thread ring shortens inspection time per part and standardises acceptance criteria across operators and shifts, supporting consistent quality control. Contact Metav Werkzeuge for specification support or to obtain this thread go ring directly from our Emmerich warehouse; technical consultants are available to advise on fitment and inspection routines Technical data Article number: M315.162.7 GTIN: 4054469125282 Designation: Thread Go Ring M62 x 2 mm, right‑hand Core measurements Thread: M62 × 2 mm Tolerance: DIN 13, 6g Weight: 2.3 kg Tariff number: 90173000 Materials & features Material: hardened gauge steel Right‑hand thread check Category: Gauges / Thread gauges Suitable for metric ISO fine threads FAQ What is the primary function of this ring gauge? The ring gauge is used as a go check for external metric ISO fine threads; the M62 × 2 mm gauge confirms that a thread meets the DIN 13, 6g acceptance criteria. Can the gauge be used for left‑hand threads? No, this unit is manufactured for right‑hand threads and is not suitable for left‑hand thread verification. How should the gauge be maintained to ensure longevity? Clean the ring with a lint‑free cloth, apply light corrosion protection after use, and protect it from knocks; these measures help the hardened gauge steel retain its profile. Is this gauge appropriate for production line sampling? Yes, its robust construction and decisive go/no‑go indication make it suitable for rapid sampling in production and inspection areas. Does the ring verify pitch and form as well as major diameter? The go ring primarily verifies whether the external thread fits the specified M62 × 2 profile within the DIN 13, 6g tolerance; dimensional deviations affecting fit are detected by the engagement result. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x2 Thread Ring Gauge, Metric ISO Fine Pitch Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, precise DIN 13 (6g) tolerancing and a clear M62 x 2 mm specification for consistent thread verification; order directly via Metav Werkzeuge or consult the team for application advice. Thread ring gauge M62 x 2 mm (DIN 13, 6g) — Metric ISO fine thread, right-hand — Metav IndustryLine The Thread ring gauge M62 x 2 mm is a hardened gauge for rapid go/no-go verification of right-hand metric ISO fine external threads in workshop inspection and production settings. Hardened gauge steel construction Conforms to DIN 13 tolerance class 6g Suitable for M62 x 2 mm metric fine threads Designed for right-hand thread inspection Reliable conformity checking for metric fine threads A ring gauge of this specification provides a straightforward, repeatable inspection method for external threads. Manufactured from hardened gauge steel, the ring verifies dimensional conformity to DIN 13 with tolerance class 6g, reducing uncertainty in fast-paced quality control. The gauge acts as a physical limit: if a threaded part enters the ring it indicates acceptable major diameter and pitch form within the specified tolerance. This principle removes complex measurement steps and supports fast decisions on batch acceptance or rework. Durable construction that maintains accuracy The choice of hardened gauge steel gives the workpiece interface high wear resistance and dimensional stability, which translates into fewer rechecks and longer service intervals. The component’s robust design helps preserve gauge geometry under regular use, ensuring consistent inspection results across production runs. For traceability and inventory planning, the compact yet solid design reduces the risk of deformation during handling, keeping measurement uncertainty low over the lifetime of the tool. Efficient integration into inspection routines The ring is tailored for external metric ISO fine threads with an M62 diameter and a 2 mm pitch; the right-hand orientation matches standard thread forms encountered in many assemblies. Its simple go/no-go function speeds throughput in incoming goods inspections or final checks without specialised measuring instruments. Where a documented quality record is required, the gauge’s conformity to DIN standards supports auditability and complements more detailed measurement equipment as part of a layered metrology strategy. Proven supply and support from Metav IndustryLine Choosing a Metav IndustryLine gauge means access to a wide product range and the logistics backbone of a European supplier. Metav’s emphasis on accessible precision ensures that inspection tools are available when needed and are supported by product information that helps integrate them into existing quality processes. The clear specification and standard compliance make this gauge a practical choice for machine shops and production lines aiming for efficient, standardised thread verification. Contact Metav Werkzeuge for application guidance or to arrange supply of Metav IndustryLine inspection gauges including the M62 x 2 mm thread ring gauge Technical Data Article number: M315.262.7 GTIN: 4054469126944 Weight: 1.3 kg Thread: M62 x 2 mm, right-hand Standard: DIN 13, 6g Facts Material: gauge steel, hardened Tariff code: 90173000 Eclass: 21170214 Category: Gauges / Thread gauges Special features Go/no-go ring for external metric ISO fine threads Designed for workshop and inspection use Robust construction for repeated verification Metav IndustryLine product designation FAQ What is the purpose of this ring gauge? The ring gauge M62 x 2 mm is used for go/no-go verification of external metric ISO fine threads to confirm conformity to DIN 13 (6g). Can the gauge be used on left-hand threads? This particular gauge is specified for right-hand threads; left-hand threads require a correspondingly oriented ring. What material is the ring made from and why does that matter? The gauge is manufactured from hardened gauge steel, which ensures wear resistance and stable dimensions for reliable inspection. Is the M62 x 2 mm ring suitable for production inspection? Yes. The ring gauge is intended for workshop and production-line verification where quick, repeatable acceptance checks are required. How does the gauge indicate conformity? A correct external thread will enter the ring within acceptable limits; the physical fit provides an immediate go/no-go decision without further measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x3 Go Thread Plug Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combining hardened gauge steel construction, conformity to DIN 13 (tolerance class 6H) and an included calibration certificate delivers reproducible acceptance testing for metric fine threads; order the plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M62 x 3.0 — right‑hand go gauge, hardened gauge steel (Metav IndustryLine) The Thread plug gauge GUT M62 x 3.0 is a right‑hand "go" gauge for verifying metric ISO fine internal threads to DIN 13, tolerance class 6H, designed for reliable workshop and production‑line use Hardened gauge steel construction Conforms to DIN 13, tolerance class 6H Calibration certificate included Right‑hand metric fine thread M62 x 3.0 Reliable acceptance testing for internal threads A dedicated go gauge simplifies thread inspection by confirming that internal threads meet the specified functional limit. Manufactured for the metric fine size M62 x 3.0, this plug gauge enables rapid pass/fail checks during incoming inspection or in‑process control, reducing measurement time and avoiding unnecessary part rework. The device supports standardised quality routines by delivering a clear binary result: the gauge fits (go) or it does not, which speeds decision making on the shop floor and integrates neatly into production control procedures. Durable materials and standardised tolerances for repeatable measurements Constructed from hardened gauge steel, the tool resists wear and maintains a stable reference geometry over repeated use; this increases service life and preserves measurement reliability. The gauge is produced to DIN 13, 6H, which defines the internal thread form and acceptance limits for ISO metric fine threads; this tolerance class ensures compatibility with mating external threads made to corresponding tolerances. Using a standardised gauge reduces uncertainty in acceptance criteria and supports consistent assembly performance across batches. Traceable calibration for documented quality assurance Supplied with a calibration certificate, the gauge arrives ready for use in documented inspection procedures and quality records. The certificate provides traceability and confirms that the tool has been checked against reference standards, supporting internal audits and supplier quality checks. Traceable calibration mitigates risk in regulated production environments and forms part of a defensible measurement system for clients who require documented proof of conformity during audits. For dependable thread inspection and full measurement traceability choose Metav IndustryLine’s plug gauge — contact Metav Werkzeuge in Emmerich for product availability or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.562.8 GTIN: 4054469154046 Weight: 1.8 kg Tariff code: 90173000 Facts Thread size: M62 × 3.0 Pitch: 3.0 mm Tolerance class: 6H Right‑hand thread Special features Material: hardened gauge steel Standard: DIN 13 Supplied with calibration certificate Intended for metric ISO fine internal threads FAQ What does the go gauge check on a threaded component? The go gauge verifies that the internal thread fulfils the minimum functional dimensions; if the gauge enters freely, the thread meets the acceptance criteria for the specified size and tolerance. Is the calibration certificate suitable for quality records? Yes, the plug gauge is supplied with a calibration certificate that provides traceability and documentary evidence for inspection protocols and audits. Can this gauge be used with the corresponding external thread? The gauge is intended for inspection of internal threads; mating external threads should be produced to compatible tolerances so that assembly meets functional requirements. What standard does the tool comply with? Manufactured to DIN 13 with tolerance class 6H, which is the accepted specification for metric ISO fine internal threads of this size. How should the gauge be stored to preserve accuracy? Store the gauge dry and protected from mechanical shock; using a dedicated box or drawer with soft lining minimises wear and helps maintain calibration intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com