Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M62x3 Go/No-Go Thread Plug Gauge Metric ISO Fine Right-Hand With Calibration Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauging steel, DIN conformity and a supplied calibration certificate to secure reliable rejection checks in production. Order the gauge directly via Metav Werkzeuge or consult our specialists for assessment and rapid supply. Thread plug gauge (No‑Go) M62 x 3.0, right‑hand — Metav IndustryLine The Thread plug gauge M62 x 3.0 (No‑Go) is a right‑hand inspection gauge for metric ISO fine threads, designed for fast go/no‑go control in quality assurance and workshop environments. No‑Go gauge for rejection control Hardened gauging steel construction Conforms to DIN 13, 6H tolerance Supplied with calibration certificate Fast, reliable rejection control for fine threads The gauge provides a straightforward method for distinguishing compliant threads from rejects during inline or batch inspections. Built to check the M62 x 3.0 metric ISO fine thread in a right‑hand form, the tool reduces decision time on the shop floor by offering an immediate pass/fail result. By using a dedicated No‑Go plug, non‑conforming parts are identified without complex measurement setups, supporting higher throughput and fewer downstream defects while keeping inspection routines lean and repeatable. Durable construction that preserves measurement integrity Manufactured from hardened gauging steel, the gauge resists wear and preserves its geometry under regular use, which sustains measurement accuracy over many inspection cycles. The hardened material and precision machining minimise profile deviation and help maintain consistent contact geometry, so repeatability remains high even in demanding production environments. Delivered with a calibration certificate, the gauge documents its condition at supply and supports traceability for quality systems and audits. Standards compliance and practical workshop benefits Compliance with DIN 13, 6H ensures the gauge matches the industry tolerance framework for internal threads, enabling direct comparison with component specifications and drawing notes. The robust design and balanced mass provide comfortable handling during quick checks, while the compact form suits bench inspection, assembly lines, and incoming goods control. For facilities aiming to tighten quality gates, the gauge is a pragmatic instrument that links clear inspection criteria with proven material and standard conformity. For DIN‑compliant No‑Go thread gauges from Metav IndustryLine and tailored advice on suitability for specific production requirements, contact Metav Werkzeuge for consultancy and fast delivery from Emmerich. Technical data SKU: M315.662.8 GTIN: 4054469154237 Material: gauging steel, hardened Thread: M62 x 3.0, right‑hand Standard: DIN 13, 6H Weight: 1.8 kg Calibration: supplied with calibration certificate Facts Nominal thread: M62 x 3.0 Pitch: 3.0 mm Right‑hand thread form Customs tariff number: 90173000 Product category: plug gauge / gauge Special features No‑Go function for rejection checks Robust hardened steel construction Supplied with calibration certificate for traceability Designed for metric ISO fine threads Intended for workshop and quality‑control use FAQ What does the No‑Go designation mean for inspections? The No‑Go function indicates the gauge is used to identify threads that exceed acceptable limits; the Thread plug gauge M62 x 3.0 (No‑Go) fails any internal thread that accepts the plug beyond the intended limit, simplifying rejection decisions. Is the gauge traceable for quality systems and audits? Yes, the gauge from Metav IndustryLine is supplied with a calibration certificate, which documents its measured condition at delivery and supports traceability within quality management systems. Which standard does the gauge comply with? The plug gauge conforms to DIN 13, 6H, matching the tolerance class commonly specified for metric ISO fine internal threads. What material is used and why is it important? The tool is made of hardened gauging steel, chosen for wear resistance and stability of contact geometry, which preserves measurement integrity across multiple inspection cycles. Can this gauge be used on both production and incoming inspection? Yes, the robust design and clear No‑Go function make the gauge suitable for quick checks in production, assembly and incoming goods control; it supports consistent acceptance criteria across stages. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x3 Thread Go/No-Go Ring Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of robust, standards‑based control for metric fine threads combined with documented traceability; the hardened gage steel construction and calibration certificate ensure repeatable inspection results on the shop floor. Order the item directly via Metav Werkzeuge or ask the consultants for application advice. No‑Go Thread Ring Gauge M62 x 3 — hardened gage steel, DIN 13 (6g) | Metav IndustryLine The No‑Go Thread Ring Gauge M62 x 3 is a hardened inspection ring designed for rapid verification of metric ISO fine threads in production and quality control environments. Hardened gage steel construction Conforms to DIN 13, tolerance 6g M62 x 3 metric fine thread Supplied with calibration certificate Assured detection where conformity matters This no‑go ring gauge serves as a decisive control tool that flags oversize or out‑of‑tolerance threads at the point of inspection. Manufactured in hardened gage steel, the gauge withstands repetitive use and retains its profile under shop conditions, which reduces recalibration frequency and supports consistent pass/fail decisions. By applying the DIN 13 tolerance class 6g, the device provides an industry‑recognised reference against which threaded components are judged, making acceptance criteria unambiguous for production inspectors and incoming‑goods teams. Built to industrial standards for straightforward integration Designed in accordance with DIN 13, the ring communicates clear nominal and limiting dimensions for metric fine threads. The M62 × 3 geometry and 6g tolerance class are widely used in mechanical engineering, so the gauge fits established inspection protocols without the need for process redesign. Its right‑hand thread form and marked size make it easy to incorporate into established quality routines, while the robust construction supports repeated use in assembly, maintenance and inspection areas. Traceability and documented accuracy for quality assurance The gauge is supplied with a calibration certificate, making inspection results traceable and auditable. This documentation supports quality control records and supplier qualification processes and gives procurement and QA teams measurable assurance of conformity. As a no‑go control, the ring provides an immediate, binary outcome that simplifies operator decisions and reduces decision latency on the production line. Practical benefits in daily workshop use With a compact, purpose‑built profile and a practical mass, the ring is easy to handle during routine checks while remaining substantial enough to resist handling wear; the design balances durability with usability. The item is well suited for incoming inspection of threaded parts, first‑article checks and spot checks during series production. By using a standards‑compliant control tool, measurement uncertainty is reduced and communication between manufacturing and quality departments becomes more objective and consistent. For dependable thread control and traceable inspection results, contact Metav Werkzeuge to discuss the Metav IndustryLine no‑go ring gauge (SKU M315.862.8) and its suitability for current production requirements — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M315.862.8 GTIN: 4054469154619 Weight: 1.8 kg Size designation: M62 x 3 Material: hardened gage steel Standard: DIN 13, tolerance 6g Facts Nominal diameter: 62 mm Thread pitch: 3.0 mm Tolerance class: 6g Tariff number: 90173000 Special features Right‑hand metric fine thread No‑go (reject) ring gauge function Supplied with calibration certificate Suitable for production and incoming inspection Category: Gauges / Ring gauges FAQ What is the intended use of this ring gauge? The No‑Go Thread Ring Gauge M62 x 3 from Metav IndustryLine is intended for go/no‑go style inspection to detect oversize or out‑of‑tolerance metric ISO fine threads during production and incoming inspection. Does the gauge come with traceable documentation? Yes, the ring gauge is supplied with a calibration certificate, providing traceable documentation for audit and quality records for the Metav IndustryLine gauge (SKU M315.862.8). What standard and tolerance does the gauge comply with? Inspection is based on DIN 13 with a tolerance class of 6g, which is the declared reference for the M62 × 3 Metav IndustryLine ring. Can this gauge be used on both left‑ and right‑hand threads? This particular ring is manufactured for right‑hand threads; for left‑hand applications a corresponding left‑hand tool should be selected. How does the no‑go function simplify quality checks? The no‑go characteristic gives an immediate pass/fail outcome for each tested thread: if the gauge enters, the thread exceeds permissible limits and is rejected, which speeds up decisions on the shop floor and reduces interpretation variance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x3 Thread Ring Gauge Go Metric ISO Fine Right-Hand Hardened Gauge, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Precision, traceability and robust construction make the Go thread ring gauge M62 x 3.0 a practical choice for production and incoming‑inspection workflows; the combination of hardened gauge steel and an included calibration certificate supports reproducible pass/fail decisions. Order the Go thread ring gauge M62 x 3.0 directly via Metav Werkzeuge or consult the advisers if required. Go thread ring gauge M62 x 3.0 — Metric ISO fine thread, hardened gauge steel (Metav IndustryLine) The Go thread ring gauge M62 x 3.0 is a hardened ring gauge for verification of right‑hand metric ISO fine threads in production control and dimensional inspection. Hardened gauge steel for long service life Supplied with a calibration certificate Conforms to DIN 13, tolerance class 6g Go gauge for fast pass/fail inspection Precision that reduces rework and cycle time The Go ring gauge delivers reliable, objective acceptance at speed. Manufactured from hardened gauge steel, the verifier resists wear and keeps the measuring boundary stable across repeated cycles, which reduces the need for frequent replacement and lowers downtime. By offering a clearly defined go/no‑go condition for metric ISO fine threads, the gauge shortens inspection time and supports consistent quality decisions on the shop floor, improving overall process efficiency. Durable design for repeatable measurements A robust ring geometry and hardened material ensure geometrical stability and resistance to deformation, which are decisive for repeatability in series inspection. The tool’s construction is optimised to preserve the thread profile under repeated engagement, maintaining the integrity of the tolerance limit described by DIN 13 and 6g. The result is fewer measurement-related variances and a predictable production yield when used as part of routine quality control. Traceability and conformity for audit processes Delivery with a calibration certificate provides documented traceability of measurement status and supports quality management requirements. The calibration evidence accompanies the gauge and documents conformity against the stated standard, facilitating integration into inspection protocols and audits. As a Go thread ring gauge, it is intended specifically for pass criteria; the clearly identifiable acceptance condition simplifies records and reduces subjective interpretation during inspections. For procurement and technical advice on the Metav IndustryLine Go thread ring gauge M62 x 3.0, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data SKU: M315.762.8 GTIN: 4054469154428 Tariff number: 90173000 Weight: 1.8 kg Facts Thread size: M62 x 3.0 Pitch: 3.0 mm Tolerance class: 6g Right‑hand thread Special features Material: hardened gauge steel Delivered with calibration certificate Standard: DIN 13 Type: Go thread ring gauge Brand: Metav IndustryLine FAQ What thread standard does this gauge verify? The Go thread ring gauge checks right‑hand metric ISO fine threads to DIN 13, tolerance class 6g as specified for the M62 x 3.0 size. Is a calibration certificate supplied with the gauge? Yes, the Metav IndustryLine Go thread ring gauge M62 x 3.0 is supplied with a calibration certificate documenting its measured status. What is the intended use of this ring gauge? The ring is intended as a Go gauge for pass/fail verification during production control and incoming inspection of metric ISO fine threads. Which SKU identifies this item? The product is listed under SKU M315.762.8 and the GTIN is 4054469154428. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x4 Thread Go Gauge Metric Fine Pitch Right-Hand DIN 13 6g With Calibration Certificate - Metav IndustryLine
Take advantage of precise conformity to DIN 13, 6g, the hardened gauge steel construction and the included calibration certificate for reliable thread inspection and repeatable acceptance testing. Order the gauge directly via Metav Werkzeuge or contact our specialists for application advice. Gewinde-Lehrring GUT M 62 X 4,0 — Go ring gauge (M62 × 4.0, right-hand) Gewinde-Lehrring GUT M 62 X 4,0 is a Go ring gauge for verifying metric ISO fine threads in production and inspection environments Go ring gauge M62 x 4.0, right-hand thread Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Reliable acceptance testing for fine threads A Go ring provides a rapid, unequivocal check that a threaded part meets the required form and pitch of a metric ISO fine thread. The M62 × 4.0 size is commonly used in larger assemblies where correct thread fit is critical; passing the Go test indicates the external thread falls within the lower limit of the tolerance band. Compliance with DIN 13 in class 6g means the gauge is manufactured to established German standards, so measurement decisions can be made on a firm, reproducible basis. This direct inspection method minimises cycle time compared with full profile measurement, supporting efficient quality control workflows. Durable construction for consistent results Manufactured from hardened gauge steel, the ring resists wear during repetitive use and preserves the functional form that defines the acceptance condition. The robust material choice enhances repeatability across production batches and reduces the need for frequent replacement, contributing to stable process capability. The ring’s mass and finish support smooth engagement with mating threads, which lowers the risk of false rejects caused by burrs or surface irregularities. In practice, this translates into fewer production interruptions and clearer go/no-go decisions at the inspection stage. Traceable calibration for quality assurance The gauge is delivered with a calibration certificate, providing documented traceability for internal audits and supplier controls. A certificate records the inspection status at the time of delivery and supports integration into a quality management system or inspection protocol. For manufacturers seeking demonstrable evidence of measurement integrity, the supplied documentation simplifies conformity records and helps meet customer or regulatory expectations. Metav IndustryLine’s presence in Europe further ensures pragmatic logistics and a consistent quality filter for repeat procurement. For dependable thread acceptance in production, choose the Metav IndustryLine Go ring M62 × 4.0 and contact Metav Werkzeuge for tailored advice and supply from Emmerich — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: M315.762.9 GTIN: 4054469155159 Article label: Gewinde-Lehrring GUT M 62 X 4,0 Core specifications Thread size: M62 × 4.0 Weight: 1.8 kg Customs tariff number: 90173000 ECLASS: 21170214 Materials & features Material: gauge steel, hardened Tolerance/class: DIN 13, 6g Direction: right-hand thread Supplied with calibration certificate Type: GO (GUT) ring gauge FAQ What does a Go ring gauge check? A Go ring gauge checks whether an external thread meets the lower limit of the tolerance band; the M62 × 4.0 Go ring gauge confirms acceptable form for the specified metric ISO fine thread. Is the gauge suitable for production use over time? Yes, the hardened gauge steel construction of the ring is designed for repeated use and maintains functional form to ensure consistent acceptance testing in production environments. Does the product include calibration documentation? The delivery includes a calibration certificate, which documents the gauge’s inspection status at dispatch and supports traceability in quality systems. Which standard does the gauge conform to? The ring is manufactured to DIN 13 and specified to class 6g, providing a recognised benchmark for thread acceptance. What is the SKU for ordering or referencing? The product is listed under SKU M315.762.9 and marketed by Metav IndustryLine as the GO ring gauge for M62 × 4.0 threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x4 Thread Go/No-Go Plug Gauge, Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise go/no-go verification, hardened gauge steel construction and conformity to DIN 13, 6H for reliable thread inspection; the tool is supplied with a calibration certificate, so traceable checks become part of the production routine — order via Metav Werkzeuge or request advice from our consultants. Go thread plug gauge GUT M62 x 4.0 — Metric ISO fine thread, right-hand, DIN 13 6H (Metav IndustryLine) The Go thread plug gauge GUT M62 x 4.0 is a dedicated right‑hand plug gauge for fast, repeatable inspection of internal metric ISO fine threads in production and incoming‑goods control Hardened gauge steel construction Conforms to DIN 13, 6H Includes calibration certificate Designed for M62×4 right‑hand threads Fast, unequivocal pass/fail inspection for fine threads A go gauge provides an immediate, objective verification: if the gauge enters the thread without forcing, the thread meets the specified size and form. Built for the M62×4 metric fine thread, the tool supports efficient inspection routines in batch production and assembly lines, cutting down rework and downtime. Conformity with DIN 13, 6H gives a clear normative reference for acceptance criteria, while the included calibration certificate documents traceability and measurement integrity. Durable production grading through hardened materials Manufactured from hardened gauge steel, the plug gauge resists wear and maintains dimensional stability under frequent use. The robust material choice reduces the need for frequent replacements and preserves the gauge tolerance over time, supporting longer service intervals and consistent results in shop‑floor environments. The design is compact yet substantial, enabling straightforward handling during repetitive checks and inspections. Practical fit for inspection stations and quality plans The right‑hand go configuration is tailored to validate internal threads quickly during in‑process control and final inspection. Integration into a quality plan is straightforward: the tool becomes an objective pass/fail control within first‑article inspections, incoming parts checks or batch sampling. Traceable calibration and the clear DIN reference simplify audit documentation and process validation in regulated production settings. For an expert consultation on implementing this Metav IndustryLine thread plug gauge in production quality checks, contact Metav Werkzeuge for ordering and technical guidance via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.562.9 GTIN: 4054469154794 Weight: 1.8 kg Material: gauge steel, hardened Standard: DIN 13, 6H Designation: Go thread plug gauge GUT M62×4 right‑hand Tariff code: 90173000 Numbers / Core technical data Diameter: 62 mm Thread pitch: 4.0 mm Thread form: metric ISO fine thread Weight (net): 1.8 kg Special features Type: Go (GUT) plug gauge for internal threads Calibration: supplied with calibration certificate Handedness: right‑hand thread gauge Category: gauges / inspection plug gauges FAQ What is the primary purpose of this plug gauge? The plug gauge is used for quick, repeatable pass/fail inspection of internal metric ISO fine threads; the Go thread plug gauge GUT M62 x 4.0 verifies that an internal M62×4, right‑hand thread conforms to specification. Which standard and tolerance class does the gauge follow? The tool is manufactured to DIN 13, 6H, providing a normative basis for the acceptance criteria used in production and quality control. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate, which documents traceability and supports audit and quality‑management requirements. What material is the gauge made from and how does that affect longevity? Made from hardened gauge steel, the gauge offers high wear resistance and dimensional stability, extending service life under frequent use in inspection routines. How is the Go plug gauge applied in practice? The gauge is used as an objective go/no‑go check: the Go end must enter the internal thread freely for the part to pass; any interference indicates non‑conformance and triggers a reject or rework decision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x4 Thread Go/No-Go Ring Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Clear verification of M62 x 4.0 metric fine threads is achieved through hardened gauge steel and compliance with DIN 13, 6g, with a calibration certificate supplied for traceability; order the thread ring gauge directly via Metav Werkzeuge or request advice from our consultants. Thread ring gauge AUSSCHUSS M62 x 4.0 — Metric ISO fine thread ring gauge, right‑hand (Metav IndustryLine) The thread ring gauge AUSSCHUSS M62 x 4.0 is a hardened inspection gauge intended for verification of metric ISO fine threads in right‑hand form, designed to support go/no‑go assessments on the production floor. Hardened gauge steel construction Conforms to DIN 13, 6g Calibration certificate included Suitable for M62 x 4.0 metric fine threads Reliable thread inspection for production control A hardened thread ring gauge provides a fast, unequivocal check of external threads and supports clear go/no‑go inspection decisions. Built to the DIN 13, 6g tolerance class and manufactured from hardened gauge steel, the ring ensures stable contact and repeatable outcomes during routine checks. In a production environment this reduces ambiguous measurements and minimises rework by identifying non‑conforming threads at first pass. The compact, dedicated form factor simplifies handling at inspection benches and in-line stations while preserving the dimensional integrity required for reliable acceptance testing. Traceable calibration for audit-ready quality assurance The tool is supplied with a calibration certificate, enabling traceability and documentation for quality records. The certificate documents the measurement status at the time of issue and supports inclusion in quality management systems and inspection protocols. For traceability chains and inspection reports, the presence of a formal calibration document strengthens audit evidence and shortens decision cycles when assessing batch conformity. Routine checks recorded against the certificate help maintain consistent measurement confidence across production batches. Robust design for repetitive use and clear identification Constructed from gauge steel, hardened, the ring offers long service life under standard inspection use; the solid mass (approx. 1.8 kg) contributes to handling stability and a consistent feel during engagement with threaded parts. The item is labelled AUSSCHUSS, indicating its inspection status—this marking is retained for clarity in stock and inspection flows; for implications regarding use or purchase conditions, please consult the distributor. The ring is produced for M62 x 4.0 nominal size and right‑hand threads, providing a purpose‑built tool for workshops and control labs that require fast, reliable verification without complex set‑ups. Contact Metav Werkzeuge for technical suitability, availability and delivery of the Metav IndustryLine thread ring gauge M62 x 4.0 (SKU M315.862.9) from Emmerich, or request assistance from our consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M315.862.9 GTIN: 4054469155333 Label: Gewinde‑Lehrring AUSSCHUSS M 62 X 4,0 for metric ISO fine thread, right‑hand Manufacturer: Metav IndustryLine Facts Thread size: M62 x 4.0 Weight: 1.8 kg eCl@ss: 21170214 Tariff number: 90173000 Special features Material: gauge steel, hardened Tolerance class: DIN 13, 6g Calibration certificate included Marked "AUSSCHUSS" (inspection/reject identification) FAQ What is the primary use of this thread ring gauge? The thread ring gauge is intended for rapid verification of external threads to confirm conformity with the metric ISO fine thread specification M62 x 4.0 and the DIN 13, 6g tolerance class. Does the product come with documentation for quality records? Yes, the ring is supplied with a calibration certificate that can be used for traceability and inclusion in quality management documentation. What does the label "AUSSCHUSS" mean for this item? The "AUSSCHUSS" label identifies the inspection status of the item; consult Metav Werkzeuge for details on condition, supply terms and any implications for use. Is the gauge suitable for routine shop‑floor use? Yes, the hardened gauge steel construction and stable mass make it suitable for repetitive go/no‑go checks on the shop floor or at inspection benches. Which standard and tolerance does the gauge follow? The tool is manufactured to DIN 13, 6g, matching the common tolerance class for metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62x4 Thread Plug Gauge Go/No-Go For Metric ISO Fine Thread, Right-Hand Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Fast, reproducible rejection of out‑of‑tolerance components is achieved by the combination of hardened gauge steel, the DIN 13 (6H) specification and the supplied calibration certificate; ideal for production line inspection and quality gates. Order the plug gauge directly via Metav Werkzeuge or consult our advisers for component matching. No‑go thread plug gauge M62 x 4.0 for metric ISO fine thread, right‑hand — Metav IndustryLine The No‑go thread plug gauge M62 x 4.0 verifies right‑hand metric ISO fine threads and is designed for clear go/no‑go decisions in manufacturing and incoming inspection. Hardened gauge steel construction Conforms to DIN 13 tolerance class 6H Supplied with calibration certificate Right‑hand metric fine thread M62 x 4 Rapid pass/fail control for production environments The no‑go plug gauge delivers immediate, unmistakable results for thread acceptance. By offering a dedicated reject‑check, the tool shortens inspection cycles and removes ambiguity from routine checks; this translates into fewer scrapped assemblies and less rework across the production line. The device is purpose‑made for quick tactile verification of metric fine threads, supporting consistent quality control without complex measuring equipment. The emphasis on a simple go/no‑go outcome accelerates throughput while preserving measurement integrity. Certified conformity and traceable measurement assurance Manufactured from hardened gauge steel, the gauge is produced to meet DIN 13 with tolerance class 6H, ensuring compatibility with standard metric ISO fine‑thread specifications. A calibration certificate is supplied with the item, confirming the condition and traceability of the gauge at delivery. These measures reduce uncertainty in supplier or in‑house inspections and support internal quality documentation. For audits and process control, the combination of material quality and the supplied certificate provides a reliable evidence chain. Robust design for shopfloor use and long service life The construction focuses on durability and repeatable performance in workshop conditions; the hardened material resists wear and helps preserve the defined mating condition for extended periods. The right‑hand configuration and the M62 x 4.0 geometry make this plug gauge suitable for medium to large fastenings and assemblies commonly found in mechanical and plant engineering. With a compact footprint and straightforward handling, the gauge integrates into routine inspection points, assembly stations or incoming goods checks, contributing to lower downtime and greater confidence in thread quality. For reliable thread verification and procurement advice, contact Metav Werkzeuge to secure this hardened M62 x 4.0 no‑go thread plug gauge with calibration certificate and ensure compatibility with existing inspection routines. Technical data Article number: M315.662.9 GTIN: 4054469154978 Weight: 1.8 kg Material: gauge steel, hardened Thread: M62 x 4.0 Standard: DIN 13, 6H Facts Thread size: M62 x 4.0 Weight (kg): 1.8 Tariff number: 90173000 eClass: 21170228 SKU: M315.662.9 Special features Gauge type: no‑go (AUSSCHUSS) Hand: right‑hand thread Calibration: supplied with calibration certificate Category: Gauges / Plug gauges FAQ What does the term “AUSSCHUSS” indicate for this gauge? “AUSSCHUSS” denotes that the tool is a no‑go plug gauge; this M62 x 4.0 plug gauge is intended to identify threads that must be rejected rather than accepted. Is a calibration document included with the gauge? Yes, the No‑go thread plug gauge M62 x 4.0 is supplied with a calibration certificate confirming its condition at delivery. Which standard and tolerance class does the gauge comply with? The gauge is manufactured to DIN 13 and meets tolerance class 6H, appropriate for metric ISO fine threads. What material is used for the plug gauge? The plug gauge is made of hardened gauge steel, chosen for wear resistance and long‑term dimensional stability. Can this gauge be used for left‑hand threads? No; the No‑go thread plug gauge M62 x 4.0 is specified for right‑hand metric ISO fine threads only. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M62×1.5 Thread Ring Gauge Go, Metric ISO Fine Pitch 6g, Right-Hand, Hardened Gauge Steel, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel body, conformity to DIN 13 / 6g, and a delivered calibration certificate for reliable reject decisions; order directly via Metav Werkzeuge or consult our specialists for application matching. No-go thread ring gauge M62 x 1.5 — right-hand, metric ISO fine thread (Metav IndustryLine) No-go thread ring gauge M62 x 1.5 for quick verification of right‑hand metric ISO fine threads in production and inspection environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Right‑hand metric fine thread Calibration certificate included Greater control with reproducible reject decisions The no‑go ring is engineered as a clear production control instrument: a reject indication is decisive and repeatable, reducing ambiguity on the inspection bench. Manufactured from hardened gauge steel, the ring maintains profile integrity under repeated use, which in turn reduces rework and scrap rates. Conformity with DIN 13 and the 6g tolerance class provides a measurable basis for pass/fail decisions in machining and assembly processes, supporting consistent quality control across batches. Built for fast in‑line checks and robust handling With the nominal size M62 x 1.5 and a right‑hand thread form, the gauge offers a practical balance of reach and manoeuvrability; its mass contributes to stable engagement and clear tactile feedback when applied. The reject function simplifies operator tasks during fast in‑line inspection, enabling immediate sorting without further measuring steps. The solid construction supports routine use in manufacturing areas where quick, unambiguous verification of external threads is required. Traceability and compliance as part of quality systems Delivered with a calibration certificate, the gauge enters the workshop ready for documented inspection routines and audit trails. This certificate documents the calibration event and measurement basis, assisting in internal quality records and supplier audits. The combination of a standardised thread tolerance, durable material and factory calibration enhances process reliability and meets the expectations of traceable measurement equipment used in production control and incoming inspection. Select the Metav IndustryLine no‑go ring M62 x 1.5 for decisive thread control in routine inspection; contact Metav Werkzeuge for specification matching, availability and technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.862.6 GTIN: 4054469152806 Tariff number: 90173000 Facts Size: M62 x 1.5 Weight: 1.8 kg Standard: DIN 13, 6g Special features Material: Gauge steel, hardened Function: No‑go (reject) ring Thread: Right‑hand metric fine thread Calibration certificate included FAQ What is the primary purpose of this ring gauge? The ring gauge serves as a definitive no‑go (reject) device for external metric ISO fine threads, allowing quick accept/reject decisions at the inspection stage. Does the gauge include documentation for quality records? Yes, the product is supplied with a calibration certificate that documents the calibration and supports traceability in quality systems. Which tolerance class does this gauge represent? This gauge conforms to DIN 13 with a tolerance of 6g, suitable for standard fine‑thread verification tasks in production and inspection. Is the ring suitable for right‑hand and left‑hand threads? This specific item is configured for right‑hand metric fine threads; left‑hand threads require the corresponding left‑hand gauge. What material is used and how does it affect durability? Constructed from hardened gauge steel, the ring resists wear and preserves the thread profile for consistent measurement outcomes over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x1.5 Thread Go Plug Gauge For ISO Fine Pitch Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of a robust inspection tool that combines DIN 13, 6H compliance, hardened gauge steel construction, and a delivered calibration certificate to keep thread checks reliable and traceable. Order the gauge directly via Metav Werkzeuge or consult our technical advisors for application guidance. Thread plug gauge Go M64 x 1.5 — metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug gauge Go M64 x 1.5 is a go-type inspection gauge designed for rapid verification of metric ISO fine internal threads in production and quality control environments. Go-type gauge to DIN 13 6H Hardened gauge steel construction Supplied with calibration certificate Ensure first-pass conformity with a go-type gauge A Go gauge provides an immediate, binary check: the threaded bore either accepts the gauge or it does not. Built to DIN 13, 6H, this gauge is intended for fast acceptance testing during machining and assembly operations, reducing downtime from iterative adjustments. The hardened gauge steel body preserves the calibrated dimension under repetitive use, so acceptance checks remain consistent over many cycles — a tangible contribution to process stability and reduced scrap rates. Traceability and quality assurance for auditing Delivered together with a calibration certificate, the gauge supports traceable inspection routines and documentation requirements. The supplied certificate documents the measured conformance of the M64 x 1.5 dimension, enabling straightforward inclusion in quality records. For regulated production or supplier audits, this traceable measurement evidence reduces administrative friction and helps demonstrate that threaded parts were verified using a certified standard. Robust design for everyday shop-floor use Manufactured from hardened gauge steel, the plug gauge stands up to repeated engagement with internal threads without rapid wear. The right-hand thread configuration matches standard metric fine-thread components, making the gauge suitable for inspection of mating threads on housings and components. The compact, single-piece design keeps handling simple and inspection quick, which is especially useful where throughput and repeatability are required. Practical benefits that affect the bottom line Using a certified Go gauge accelerates go/no-go decisions on the shop floor, shortening inspection times and lowering the cost of non-conforming production. Because the gauge addresses a single decisive acceptance criterion, it simplifies operator training and reduces measurement variability introduced by subjective judgement. The result is improved production efficiency and a clearer, faster quality-control workflow. Contact Metav Werkzeuge to request the Metav IndustryLine Go gauge or technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.564.6 SKU: M315.564.6 GTIN: 4054469152097 Facts Thread size: M64 x 1.5 Weight: 1.8 kg Tariff number: 90173000 Special features Material: hardened gauge steel Tolerance / standard: DIN 13, 6H Thread form: metric ISO fine thread Handedness: right-hand Supplied with calibration certificate FAQ What is the primary purpose of this plug gauge? The Thread plug gauge Go M64 x 1.5 is used to verify the acceptance of internal metric ISO fine threads by providing a clear go/no-go result for production and incoming inspection. Does the gauge come with traceable documentation? Yes, the Metav IndustryLine plug gauge is supplied with a calibration certificate that documents the measured conformity of the M64 x 1.5 dimension. To which standard is the gauge manufactured? The gauge is manufactured to DIN 13, 6H, which defines the tolerance system for metric ISO internal threads. What material is the gauge made from and why does it matter? The plug gauge is made from hardened gauge steel; this ensures wear resistance and dimensional stability during repetitive inspections. Is this gauge suitable for high-volume production checking? Yes, the Go-type design and hardened construction make the gauge well suited to routine, high-frequency acceptance checks in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x1.5 Thread Go/No-Go Ring Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 conformity and an included calibration certificate for dependable pass/fail checks in serial production; order the ring gauge directly via Metav Werkzeuge or consult our advisers for application advice. M315.864.6 Thread Ring Gauge — M64 x 1.5, right‑hand, hardened gauge steel — Metav IndustryLine The M315.864.6 is a right‑hand thread ring gauge for metric ISO fine threads, designed for rapid pass/fail inspection of M64 x 1.5 threads in workshop and production environments. Hardened gauge steel construction Class 6g to DIN 13 Includes calibration certificate Right‑hand M64 x 1.5 reject ring Ensure consistent quality with decisive pass/fail checks A dedicated reject (No‑go) ring provides an unambiguous measure of out‑of‑tolerance threads, reducing the risk of assembly failures and costly rework. The hardened gauge steel body resists wear under repeated contact, which preserves the gauge’s dimensional integrity over time. Manufactured to DIN 13 and the 6g tolerance class, this inspection tool supports fast, objective controls directly at the production line or inspection bench, improving process reliability and sample throughput by removing subjective judgement from routine checks. Traceable calibration for audit‑ready inspection This ring gauge is supplied with a calibration certificate, supporting traceability for quality management and internal audits. The documentation records the measured condition at delivery and enables integration into existing quality systems, allowing suppliers and quality engineers to demonstrate measurement validity to customers and auditors. Built for repetitive use, the gauge offers a practical balance between durability and metrological clarity, helping teams maintain documented control over thread quality across batches. Practical handling and workplace benefits Compact yet robust, the gauge’s design simplifies rapid checks on manufactured thread parts and fixtures. The right‑hand orientation and ISO fine‑thread form make it suitable for threads commonly found in machine assemblies and precision housings. Being a dedicated reject ring allows immediate segregation of non‑conforming components, streamlining downstream processes. Regular care—cleaning contact faces and storing the gauge in a dry, dust‑free location—maximises service life and preserves accuracy for continuous production use. Contact Metav Werkzeuge today to verify suitability of the Metav IndustryLine M315.864.6 for your inspection routine and to arrange supply with the calibration documentation included. Technical Data SKU: M315.864.6 GTIN: 4054469152813 Description: Thread ring gauge REJECT M64 x 1.5, right‑hand Material: gauge steel, hardened Norm: DIN 13, 6g Weight: 1.8 kg Customs tariff number: 90173000 Special feature: calibration certificate included Facts Thread size: M64 x 1.5 Tolerance class: 6g Weight: 1.8 kg GTIN: 4054469152813 Special features Right‑hand thread Reject / No‑go ring Hardened gauge steel Supplied with calibration certificate Category: Thread gauges FAQ What is the intended use of this ring gauge? The ring is intended for pass/fail inspection of M64 x 1.5 metric ISO fine threads; it functions as a reject (no‑go) ring to identify out‑of‑tolerance threads. Does the gauge arrive with calibration documentation? Yes, the gauge is delivered with a calibration certificate, which records the measured condition at delivery and supports traceability. Which standard does the gauge comply with? This inspection ring is manufactured to DIN 13 and the 6g tolerance class for metric ISO fine threads. Is the material suitable for repetitive workshop use? The device is made from hardened gauge steel, chosen for wear resistance and longevity in routine inspection tasks. Can this ring be used for assembly checks in production? Yes, the reject ring design provides fast, objective pass/fail results that are well suited to production‑line quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x1.5 Thread Plug Gauge Metric ISO Fine Right-Hand Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise rejection control, robust hardened gauge steel and a supplied calibration certificate to keep inspection decisions clear and reproducible; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge NO-GO M64 x 1.5 — Right-hand, hardened gauge steel (Metav IndustryLine) A Thread plug gauge NO-GO M64 x 1.5 for verification of metric ISO fine internal threads in right-hand form, intended for workshop and inspection use Hardened gauge steel, DIN 13, 6H Right-hand metric fine thread NO-GO Supplied with calibration certificate Traceable by GTIN and SKU Assured rejection control for metric fine threads The NO-GO plug is designed to verify whether an internal metric fine thread exceeds tolerance; the gauge must not engage when the hole is within specification. Made from hardened gauge steel and produced to DIN 13, 6H, this inspection tool provides a clear go/no-go decision without the need for measurement interpretation. Using a dedicated reject gauge reduces subjective judgement in quality checks and shortens decision times on the production line, improving throughput and lowering the risk of passing out-of-tolerance components. The M64 x 1.5 designation denotes the nominal diameter and thread pitch, matching standard ISO fine-thread sizes. Designed for repeatability and traceability Delivery with a calibration certificate confirms the gauge's conformity at the point of dispatch and supports documented quality procedures. The item is traceable via GTIN and SKU for inventory control and audit trails, and its robust construction—specified material gauge steel, hardened—ensures dimensional stability under routine use. A compact mass of approximately 1.8 kg facilitates handling and mounting in inspection fixtures. By integrating this plug gauge into incoming inspection or final-test stations, organisations can reduce rework and ensure consistent batch acceptance criteria across shifts. Fits workshop workflows and quality control systems As a right-hand plug gauge configured for NO-GO verification, the tool is straightforward to use within established control plans: it complements measuring devices and visual inspection steps without replacing calibrated measuring instruments where quantitative data are required. The gauge's intended function as a reject control element simplifies operator training and speeds routine checks. Metav IndustryLine supplies this gauge with traceable documentation, reflecting Metav’s role as a quality filter for the European market and supporting reliable, repeatable inspection practices in machine shops and quality departments. Select Metav IndustryLine’s NO-GO thread plug gauge for dependable thread rejection control and contact Metav Werkzeuge for ordering or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.664.6 GTIN: 4054469152332 Weight: 1.8 kg Material: gauge steel, hardened Thread size: M64 x 1.5 Orientation: right-hand Standard: DIN 13, 6H Calibration: calibration certificate included Facts Weight: 1.8 kg Thread diameter: 64 mm Thread pitch: 1.5 mm Zolltarifnummer: 90173000 ECLASS: 21170228 GTIN: 4054469152332 Special features Hardened gauge steel construction Right-hand metric ISO fine thread NO-GO configuration Conforms to DIN 13, 6H Supplied with calibration certificate Intended as a reject/no-go plug gauge FAQ What is the intended function of this plug gauge? The NO-GO plug gauge is intended to provide a clear reject decision for internal metric fine threads; if the gauge enters the thread, the part is out of tolerance and should be rejected. Is a calibration certificate supplied with the gauge? Yes, the gauge is supplied with a calibration certificate confirming the inspection status at dispatch for the Metav IndustryLine NO-GO thread plug gauge (SKU M315.664.6). Which standard does the gauge comply with? The gauge is manufactured to meet the requirements of DIN 13, 6H, suitable for metric ISO fine threads in the specified size. Can this gauge be used for left-hand threads? No, this particular gauge is manufactured as a right-hand NO-GO plug for M64 x 1.5 threads and is not suitable for left-hand thread verification. What material is used and how durable is the gauge? Constructed from hardened gauge steel, the tool is designed for repeated use in workshop inspection routines and offers long-term dimensional stability when used as intended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x1.5 Thread Ring Gauge, ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise thread inspection with a robust, hardened gauge that meets DIN 13 tolerances and arrives with a calibration certificate for immediate traceability. The combination of wear‑resistant gauge steel, clear conformity to 6g tolerance and right‑hand M64 x 1.5 specification keeps quality control efficient and reproducible. Order the gauge directly via Metav Werkzeuge or ask our consultants if needed. Go ring gauge M64 x 1.5 (right‑hand) — Go thread ring gauge, hardened gauge steel (Metav IndustryLine) The Go ring gauge M64 x 1.5 is a go thread ring for quick verification of metric ISO fine threads in production and inspection, intended for right‑hand connections and compliance checks. Go ring gauge M64 x 1.5, right‑hand Hardened gauge steel, wear‑resistant Supplied with calibration certificate Manufactured to DIN 13, tolerance class 6g Repeatable verification for production control A go ring gauge of this class is designed for fast, unambiguous acceptance testing on threaded parts. Made from hardened gauge steel, the ring retains form and dimensional stability during repeated use, which reduces wear‑related drift and maintains a consistent pass/fail threshold. Conformance to DIN 13 and the 6g tolerance class provides an industry‑recognised reference point for manufacturers and inspectors, enabling clear go/no‑go decisions and reducing downstream rework. Traceability and quality assurance from delivery This product is supplied with a calibration certificate, making it suitable for quality systems that require documented traceability at receipt. The included certificate documents the measured condition of the gauge at delivery and supports integration into inspection routines or incoming goods control. For workshops and inspection benches that prioritise documented compliance, the presence of this certificate simplifies audit preparation and technical acceptance routines. Practical benefits on the shop floor and in the workshop The ring’s M64 x 1.5 geometry and right‑hand designation match the most common metric fine‑thread applications for larger fittings and components, providing immediate applicability without additional fixtures. The gauge’s robust construction and modest mass support straightforward handling and mounting in test rigs or on dedicated go/no‑go stands. By using a dedicated go ring gauge, measurement time is reduced and operator variability is minimised, improving throughput while preserving part quality. For assured thread inspection and documented traceability, contact Metav Werkzeuge to request the Metav IndustryLine go ring gauge or consult our specialists for application advice. Technical data Article number: M315.764.6 GTIN: 4054469152578 Weight: 1.8 kg Material: gauge steel, hardened Size: M64 x 1.5 Norm: DIN 13, 6g Facts Thread designation: M64 × 1.5 Tolerance class: 6g Right‑hand thread Tariff number: 90173000 Special features Supplied with calibration certificate Go (GUT) type ring gauge for acceptance testing Brand: Metav IndustryLine Suitable for production and incoming inspection FAQ What does the Go marking mean for use in inspection? The Go marking indicates this is a go ring gauge designed to confirm that a threaded part falls within the maximum material condition; the Go ring gauge M64 x 1.5 allows immediate acceptance checks without further measurement. Is the gauge delivered with traceable documentation? Yes, the ring gauge is supplied with a calibration certificate that documents its condition on delivery and supports traceability in inspection records. Which standard and tolerance does the ring comply with? The gauge is manufactured to DIN 13 with tolerance class 6g, suitable for verifying metric ISO fine threads in standard industrial applications. Can this ring be used for left‑hand threads? No, this particular ring is specified for right‑hand threads; left‑hand thread inspection requires the corresponding left‑hand gauge. Is the material suitable for repeated shop‑floor use? The body is made from hardened gauge steel, chosen for wear resistance and dimensional stability under repeated use typical in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x2 Thread Go Plug Gauge Metric Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Reliable acceptance testing is provided by hardened gauge steel construction, clear conformity to DIN 13, tolerance 6H, and an included calibration certificate, ensuring reproducible results on the shop floor. Order the thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread Plug Gauge GO M64×2.0 — Metric ISO fine thread plug gauge, right-hand (Metav IndustryLine) The Thread Plug Gauge GO M64×2.0 is a precision inspection tool for rapid verification of internal metric ISO fine threads in production and quality-control environments. Calibration certificate included Conforms to DIN 13, tolerance 6H Hardened gauge steel construction Right-hand metric fine thread M64×2 Consistent go/no-go verification for production quality A dedicated Go plug gauge provides a fast, objective decision at the control point: the gauge either enters (Go) or it does not. Built to the DIN 13 thread form with 6H tolerance, this plug gauge verifies pitch, form and major/minor diameters relevant to metric ISO fine threads. The result is a measurable reduction in ambiguous assessments and rework, supporting efficient acceptance sampling and inline checks without complex measurement set-ups. Robust construction that keeps calibration intervals long Manufactured from hardened gauge steel, the instrument delivers high wear resistance and dimensional stability under repeated use. The material choice and solid construction reduce change in reference dimensions over time, which preserves the reliability of go/no-go checks and extends the period between recalibrations. For workshops and production lines that require durable inspection tools, this gauge offers low-maintenance performance and dependable repeatability. Traceability and documentation for audit-ready inspection The delivery includes a calibration certificate, providing traceability of measurements for internal quality records and external audits. Traceable documentation demonstrates that inspection tools have been checked against recognised standards and supports conformity assessments during audits. The calibrated condition means the gauge is ready for immediate use in final inspections or incoming goods control, simplifying workflow and strengthening process control for thread production. For calibrated, workshop-ready thread inspection with the Metav IndustryLine GO M64×2, contact Metav Werkzeuge in Emmerich for specification support and delivery arrangements via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.564.7 GTIN: 4054469153056 Name: Thread plug gauge GO M64×2.0, right-hand Weight: 1.8 kg Tariff number: 90173000 Facts Thread size: M64×2 mm Pitch: 2.0 mm Tolerance position: 6H Classification: 21170228 (eClass) Special features Material: Gauge steel, hardened Standard: DIN 13 Calibration certificate included Right-hand thread Categories: Gauges, Thread gauges FAQ What does the GO plug gauge check on a threaded part? The GO plug gauge confirms that the internal M64×2 thread meets the nominal form and fit criteria; the Metav IndustryLine GO M64×2 is used to verify entry and basic dimensional acceptance. Which standard and tolerance are applied with this gauge? This plug gauge is manufactured to DIN 13 and specified for the 6H tolerance position appropriate for metric ISO fine internal threads. Is a calibration document supplied with the gauge? Yes; the gauge is delivered with a calibration certificate, providing traceability and documentation for quality records. What material is the gauge made from and how does this benefit inspection? The gauge is made from hardened gauge steel, offering high wear resistance and stable reference dimensions for repeated inspections. Can the gauge be used for routine shop-floor acceptance testing? Absolutely; the GO M64×2 plug gauge is designed for rapid, repeatable acceptance checks in production and incoming goods control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x2 Thread Go Ring Metric ISO Fine Right-Handed Hardened Gauge Steel DIN 13 6g With Calibration Certificate - Metav IndustryLine
Take advantage of precise thread inspection thanks to DIN 13 compliance, hardened gauge steel construction and a supplied calibration certificate for audit-ready traceability. These characteristics ensure fast, reproducible acceptance testing and long service life. Order the (Thread ring gauge GO M64 x 2.0) directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge GO M64 x 2.0 — Metric ISO fine-thread ring gauge, right-hand, Metav IndustryLine The Thread ring gauge GO M64 x 2.0 is a hardened, DIN‑compliant functional gauge designed for rapid acceptance testing of metric ISO fine threads in production and quality control. Hardened gauge steel construction DIN 13 tolerance class 6g Supplied with calibration certificate Reliable conformity checks without guesswork The Thread ring gauge GO M64 x 2.0 is built for clear go/no‑go decisions during incoming inspection and routine process checks. As a GO gauge manufactured to DIN 13 with tolerance 6g, it confirms whether a threaded part meets the dimensional envelope required for assembly and function. Using a dedicated ring for the GO condition reduces interpretation errors common with measuring instruments: the part either enters the gauge or it does not, which simplifies quality reporting and speeds up inspection cycles. This direct method of verification supports lean production by shortening decision times and lowering scrap through immediate pass/fail assessment. Durable design for repeatable use on the shop floor Constructed from hardened gauge steel, the gauge resists wear and maintains dimensional stability under frequent handling, providing consistent results over many inspection cycles. The robust build and ergonomic handling mean minimal set‑up time and a lower need for frequent replacements, which improves throughput in production environments. With a practical mass of 1.8 kg, the device offers a reassuring balance between solidity and portability, so it can be used at workstations or transferred between inspection benches without compromising repeatability. The simple mechanical principle behind the ring gauge also reduces susceptibility to electronic faults and calibration drift, delivering dependable performance in demanding workshop conditions. Traceable calibration for audit-ready inspection Supplied with a calibration certificate, the gauge comes ready for integration into quality systems and audit trails. The certificate documents the verification status of the tool and supports traceability in internal and external quality audits, reducing administrative friction when demonstrating conformity. For process engineers and quality managers, this means fewer interruptions during acceptance tests and clearer documentation for batch records. The compact form of the ring gauge and the clear documentation together make it a pragmatic choice for laboratories and production lines that require documented evidence of compliance without complex measurement procedures. For production-ready thread inspection backed by DIN conformity and a supplied calibration certificate, contact Metav Werkzeuge to source the Metav IndustryLine Thread ring gauge GO M64 x 2.0 (M315.764.7) or request specific technical advice from our consultants. Technical Data Article number: M315.764.7 GTIN: 4054469153643 Label: Thread ring gauge GO M64 x 2.0, metric ISO fine thread, right-hand Numbers / Core Technical Data Thread size: M64 x 2.0 Weight: 1.8 kg Tariff number: 90173000 ECLASS: 21170214 Special features / Versions Material: gauge steel, hardened Standard: DIN 13, tolerance 6g GO gauge for functional acceptance testing Supplied with calibration certificate FAQ What is the primary purpose of this gauge? The Thread ring gauge GO M64 x 2.0 (M315.764.7) from Metav IndustryLine is intended for functional GO acceptance testing of metric ISO fine threads to verify whether parts meet required assembly dimensions. Is the gauge delivered calibrated? Yes, the gauge is supplied with a calibration certificate; the Thread ring gauge GO M64 x 2.0 includes documented verification for traceability in quality systems. What material is the gauge made from and how durable is it? The gauge is made of hardened gauge steel, which ensures wear resistance and long‑term dimensional stability for repeated use in production environments. Which standard and tolerance class does the gauge conform to? The ring gauge complies with DIN 13 and is manufactured to tolerance class 6g, providing a standardised acceptance boundary for metric ISO fine threads. Can this gauge be used for left‑hand threads? No, the supplied Thread ring gauge GO M64 x 2.0 is designed for right‑hand metric ISO fine threads only; left‑hand versions must be specified separately. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x2 Thread Ring Gauge Go/No‑Go ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction and conformity to DIN 13, 6H for reliable thread verification; the M64 x 2.0 AUSSCHUSS (no‑go) plug gauge comes with a calibration certificate for traceable inspection results — order directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge M64 x 2.0 (AUSSCHUSS) — metric ISO fine thread, hardened gauge steel — Metav IndustryLine A thread plug gauge M64 x 2.0 (AUSSCHUSS) intended for right‑hand metric ISO fine threads, designed for rapid acceptance testing and incoming‑goods control in mechanical workshops and quality departments Hardened gauge steel construction Conforms to DIN 13, 6H No‑go (AUSSCHUSS) function for clear pass/fail Includes calibration certificate Secure verification for fine metric threads The no‑go gauge function provides an unequivocal pass/fail check for internal threads, preventing out‑of‑tolerance parts from entering production. Manufactured from hardened gauge steel, the instrument resists wear and preserves the reference profile over many cycles, which reduces repeat inspections and extends service intervals. Compliance with DIN 13, 6H means the thread form and tolerance basis are aligned with established metric ISO fine‑thread practice, enabling straightforward integration into existing quality routines without reinterpretation of standards. Reduce rework and speed up quality decisions Using a dedicated M64 x 2.0 AUSSCHUSS plug simplifies decision making at the inspection station: if the no‑go end enters the thread, the component is rejected; if it does not, the thread passes this upper‑limit control. This binary result shortens inspection time and lowers the risk of downstream failures, translating into measurable production savings and improved throughput. A calibration certificate is supplied with the gauge, ensuring traceability of measurements and supporting quality documentation for audits or supplier control. Robust design for workshop conditions The gauge is made of hardened gauge steel and finished to maintain profile fidelity under repeated use; the robust construction is suited to routine incoming‑goods checks and shop‑floor sampling. The right‑hand orientation and fine‑thread geometry are ready for immediate use in thread inspection benches or as part of go/no‑go sets. Delivered as a single‑piece inspection tool, it offers a compact, low‑maintenance solution that complements coordinate checks or more detailed metrology when non‑conformance requires further investigation. For reliable and traceable thread inspection in production or QA, contact Metav Werkzeuge to discuss the M64 no‑go plug gauge and its suitability for specific assemblies — Metav Werkzeuge can advise on delivery and calibration options. Technical data SKU: M315.664.7 GTIN: 4054469153261 Tariff code: 90173000 Facts Thread size: M64 x 2.0 Weight: 1.8 kg Standard: DIN 13, 6H Special features Hardened gauge steel Right‑hand metric ISO fine thread AUSSCHUSS (no‑go) plug gauge Calibration certificate included Category: Gauges / Thread inspection FAQ What does AUSSCHUSS (no‑go) mean for thread inspection? A no‑go (AUSSCHUSS) plug gauge is intended to check the upper limit of an internal thread; if the no‑go end enters, the part fails and should be rejected according to the inspection rules. Is a calibration certificate supplied with this plug gauge? Yes — the M64 x 2.0 AUSSCHUSS plug gauge is delivered with a calibration certificate to document traceability and support quality records. Which standard does the gauge follow? The plug gauge is manufactured to match DIN 13, 6H, aligning the thread form and tolerance class with metric ISO fine‑thread practice. Can this gauge be used for left‑hand threads? No — this product is specified for right‑hand threads; left‑hand applications require a dedicated left‑hand gauge. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which maintains the reference profile under repeated use and minimises wear‑related drift in inspection results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x2 Thread Ring Gauge Metric Fine Pitch Right-Hand Go/No-Go, Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction combined with DIN‑compliant thread tolerancing for dependable in‑process checks; the unit is supplied with a calibration certificate for immediate traceability. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge (reject) M64 × 2.0 — right‑hand, DIN 13, Metav IndustryLine A thread ring gauge (reject) M64 × 2.0 for verification of metric ISO fine threads, designed for right‑hand threads and tolerance class 6g in inspection and workshop environments Hardened gauge steel construction For metric ISO fine thread M64×2, right‑hand Supplied with calibration certificate Manufactured to DIN 13, tolerance 6g Ensure consistent thread quality with DIN‑based tolerancing This ring gauge verifies M64 × 2.0 metric ISO fine threads to DIN 13 with tolerance class 6g, providing a clear, repeatable acceptance criterion during incoming and in‑process inspections. Made from hardened gauge steel, the instrument resists wear and preserves its functional form under regular use, which reduces rework and production interruptions. The marked status as a reject gauge supports fast separation of non‑conforming parts, allowing quality teams to act decisively while retaining documented evidence for audits. Built for dependable measurement and efficient workflows The robust design and balanced mass contribute to stable handling during routine checks; the unit’s physical properties limit deformation, helping maintain reproducible engagement with the test thread. Supplied with a calibration certificate, the gauge enters the inspection routine ready for traceable measurements, minimising downtime for initial verification. Use of standardised thread measures simplifies integration into existing test plans and reduces the need for bespoke fixtures, supporting a streamlined quality control process in metalworking and manufacturing settings. Traceability and documentation that support quality systems A calibration certificate accompanies the gauge, documenting its measured condition at delivery and supporting traceability in quality records. This documentation assists compliance efforts and simplifies record keeping for audits and internal reviews. With a clearly defined GTIN and SKU, inventory and procurement processes remain straightforward, enabling shops and QC labs to manage assets transparently and plan replacement intervals based on measured wear rather than guesswork. Practical applications and handling guidance Designed for workshop inspection, toolroom checks and incoming goods control, the gauge is suitable for routine verification of right‑hand metric ISO fine threads in production and maintenance environments. The hardened material and DIN conformity make it suitable for repeated engagement against standard thread forms; as with any precision tool, store in a dry, stable environment and handle with care to maintain accuracy. Lightweight enough for bench use yet substantial enough for a positive feel, it balances usability with the stability required for consistent inspection results. For traceable thread inspection and quick procurement, contact Metav Werkzeuge in Emmerich—our technical advisors can confirm suitability and arrange delivery from stock via phone +49 2822 7131930 or e‑mail at info@metav-werkzeuge.com Technical data Article number: M315.864.7 GTIN: 4054469153858 Weight: 1.8 kg Size: M64×2 Standard: DIN 13, 6g Facts Tariff code: 90173000 Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Tolerance class 6g Supplied with calibration certificate Marked as reject for clear segregation FAQ What thread form does this gauge check? This thread ring gauge checks a metric ISO fine thread in size M64 × 2.0, manufactured to DIN 13 with tolerance class 6g. Is a calibration certificate included with the gauge? Yes, the unit is supplied with a calibration certificate, providing traceable documentation of the gauge condition at delivery. What material is the gauge made from? The gauge is made from hardened gauge steel, selected for wear resistance and dimensional stability during repeated use. Can this gauge be used for left‑hand threads? No, this item is specified for right‑hand threads only; left‑hand verification requires the corresponding left‑hand gauge. How is the product marked for use in quality control? The gauge is marked as reject to support rapid identification and segregation of non‑conforming parts in inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x3 Metric ISO Fine Thread Ring Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate Included - Metav IndustryLine
Take advantage of the combination of hardened gauge steel construction, DIN 13 (6g) conformity and the included calibration certificate for reproducible, audit‑ready thread inspection; order the gauge directly via Metav Werkzeuge or request advice from our consultants. Gewinde‑Lehrring GUT M 64 x 3,0 — Go thread ring gauge, hardened gauge steel, right‑hand The Gewinde‑Lehrring GUT M 64 x 3,0 is a precision Go thread ring gauge for verification of metric ISO fine threads in production and inspection environments. Go ring gauge M64 x 3 for ISO fine threads Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6g Delivered with calibration certificate Traceable accuracy for consistent quality control The ring gauge offers measurable conformity to established standards, providing a fast and reliable pass/fail check for external threads. Built to DIN 13 with a 6g tolerance, this Go gauge supports standardised inspection routines and reduces subjective judgement during quality control. The hardened construction minimises wear, so the gauge maintains its acceptance dimensions over many inspection cycles, helping to prevent false rejects and rework while increasing throughput on the inspection bench. Robust design that endures workshop conditions Made from hardened gauge steel, the instrument is engineered for durability in industrial environments. The material choice and heat treatment deliver high resistance to abrasion and mechanical stress, which means fewer replacements and a lower total cost of ownership. The compact, hand‑friendly form enables quick handling on the shop floor and stable seating on threaded parts, supporting consistent contact between gauge and component for repeatable assessments. Calibrated delivery for audit readiness Supplied with a calibration certificate, the gauge arrives ready for incorporation into documented quality workflows. The certificate documents the measured acceptance state and facilitates traceability in internal audits or customer inspections. For manufacturers and inspection departments who require documented measurement assurance, this feature removes an additional logistic step and accelerates integration into control plans and measurement procedures. Practical benefits for production and inspection teams As a dedicated Go gauge for an M64x3 pitch, the tool accelerates thread acceptance checks without complex measurement setups. Its right‑hand geometry matches standard external thread orientations, ensuring immediate compatibility with typical machined axles and fittings. The simple pass/fail nature of the device converts technical accuracy into operational speed: fewer measurement steps, lower operator training requirements and clearer release criteria for assemblies. For assured thread inspection and expert advice on Metav IndustryLine gauges, contact Metav Werkzeuge in Emmerich for order and technical details: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M315.764.8 GTIN: 4054469154435 Tariff number: 90173000 Weight: 1.8 kg Facts Thread size: M64 x 3 Standard: DIN 13, 6g Label: Gewinde‑Lehrring GUT M 64 X 3,0 für metrisches ISO‑Feingewinde, rechts Special features Material: gauge steel, hardened Type: Go (GUT) ring gauge Hand orientation: right‑hand thread Delivered with calibration certificate FAQ What is the intended use of this ring gauge? The Go ring gauge is intended for quick pass/fail inspection of external metric fine threads M64 x 3 during production and incoming inspection. Does the gauge arrive calibrated? Yes, the ring gauge is supplied with a calibration certificate documenting its acceptance state for traceability. Which standard does the gauge comply with? The gauge is manufactured to conform to DIN 13 with a 6g tolerance class for metric ISO fine threads. What material is the gauge made from? The gauge is made from hardened gauge steel, chosen for wear resistance and long service life in workshop conditions. Can this gauge be used on left‑hand threads? This particular item is a right‑hand Go ring gauge and is intended for standard right‑hand external threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x3 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of DIN conformity, robust hardened gauge steel and an included calibration certificate to secure reproducible thread inspection in production and quality control. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M64 x 3.0 — metric ISO fine thread, right-hand (Metav IndustryLine) A Thread plug gauge GUT M64 x 3.0 designed for fast, repeatable verification of metric ISO fine threads in inspection and production environments. GUT tolerance for metric ISO fine threads Hardened gauge steel construction Conforms to DIN 13, 6H Supplied with calibration certificate Ensuring production conformity with a compact inspection tool The GUT tolerance class and the M64 x 3.0 size make this plug gauge an immediate fit for verifying metric ISO fine threads where consistent part acceptance is essential. Manufactured from hardened gauge steel, the gauge resists wear and maintains a reliable go/no-go condition across repeated use, which reduces rework and rejects. Conformity to DIN 13, 6H provides a clear audit trail for quality systems and supports consistent acceptance criteria on the shop floor. The result is a straightforward, evidence-based measure of thread correctness that integrates into standard inspection routines. Practical benefits for workshop and inspection tasks Designed as a right-hand thread plug gauge, the tool simplifies in-process checks and final inspection steps: a quick go/no-go trial eliminates lengthy setups and helps prevent downstream assembly issues. The inclusion of a calibration certificate documents traceability and ensures the gauge is suitable for quality assurance records. Where batch integrity matters, this approach reduces stoppages and supports efficient decision-making in serial production. The compact form and robust construction allow rapid handling while retaining the dimensional stability needed for repeatable checks. Durability, traceability and workplace confidence Built to withstand regular use, the gauge’s hardened gauge steel body combines mechanical strength with a long service life, lowering total cost of ownership through fewer replacements. Traceability is supported by clear identification (SKU and GTIN in the technical data), aiding inventory control and calibration scheduling. Supplied by Metav IndustryLine, the gauge suits inspection benches and maintenance stores that require reliable, standardised verification tools for metric fine threads, helping teams maintain assembly quality and minimise warranty risks. For traceable thread inspection and dependable workshop supply, order the Metav IndustryLine plug gauge via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com / +49 2822 7131930 for further specification support Technical data Article number: M315.564.8 GTIN: 4054469154053 Tariff number: 90173000 Thread designation: M64 x 3.0 Hand: right Facts Weight: 1.8 kg Tolerance class: GUT Standard: DIN 13, 6H Special features Material: hardened gauge steel Delivered with calibration certificate Intended for metric ISO fine threads Category: plug gauge / inspection gauge FAQ What tolerance class does the gauge check? The gauge is manufactured to the GUT tolerance class and is intended for go/no-go verification of metric ISO fine threads. Is the plug gauge delivered calibrated? Yes, the Thread plug gauge GUT M64 x 3.0 is supplied with a calibration certificate documenting its condition at delivery. Which standard does this gauge follow? This plug gauge conforms to DIN 13, 6H, providing a standardised acceptance reference for metric threads. What material is the gauge made from? The gauge is produced from hardened gauge steel, selected for wear resistance and dimensional stability under repeated use. For which applications is this plug gauge suitable? The gauge is suited to production and inspection tasks that require verification of metric ISO fine threads, particularly for right-hand-threaded components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x3 Thread Go Ring Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Rely on the hardened gauge-steel construction and DIN‑13, 6g tolerance for fast, repeatable pass/fail checks of M64×3 threads; the supplied calibration certificate provides traceable measurement results. Order the no‑go thread ring directly via Metav Werkzeuge or ask our consultants for application advice. No-go Thread Ring "AUSSCHUSS" M64 x 3.0 — metric ISO fine thread, right-hand, hardened gauge steel (Metav IndustryLine) A No-go thread ring "AUSSCHUSS" M64 x 3.0 is a right‑hand metric ISO fine‑thread gauge designed for rapid pass/fail inspection of M64×3 components in production and quality control settings. No-go ring for M64×3 metric fine threads Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, tolerance class 6g Reliable pass/fail control that protects production quality The no‑go ring functions as a definitive pass/fail inspection aid for threads: a part that enters the ring indicates an out‑of‑tolerance condition and should be rejected. Built to DIN 13 and tolerance class 6g, this gauge turns complex verification steps into a single, unambiguous check. The clear binary outcome speeds throughput on the shop floor and reduces reliance on operator interpretation, thereby lowering scrap rates and preventing assembly issues down the line. Durable design for consistent results and traceability Manufactured from hardened gauge steel, the ring resists wear and preserves its dimensional integrity across repeated use. The right‑hand M64×3 geometry is produced to tight standards so that the gauge retains form during routine handling. A calibration certificate is supplied with the gauge, ensuring documented traceability of measurements and supporting quality audits. These attributes make the ring suitable for repetitive inspection tasks where reproducibility and documented evidence are required. Practical application in workshops and inspection stations This inspection ring is ideal for incoming inspection, in‑process checks and final quality control for parts with metric ISO fine threads. The compact, single‑function design enables quick ergonomic handling at conveyor or manual inspection points. Using a dedicated no‑go ring complements measurement instruments by providing a rapid screening step that preserves more time‑consuming metrology resources for marginal or critical cases, supporting an efficient and auditable workflow. For proven thread inspection backed by Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for tailored advice or to secure the No‑go thread ring for your inspection process. Technical Data SKU: M315.864.8 GTIN: 4054469154626 Manufacturer: Metav IndustryLine Measurements & Weight Thread: M64 × 3.0 Thread type: metric ISO fine, right‑hand Tolerance class: 6g Weight: 1.8 kg Customs tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13 Function: no‑go (reject) ring gauge Supplied with calibration certificate FAQ What does the "AUSSCHUSS" designation mean for this gauge? The "AUSSCHUSS" marking identifies the product as a no‑go ring for rejecting threads that exceed the permissible limit; the inspection outcome is a clear pass/fail indication. Is a calibration certificate included with the gauge? Yes, the no‑go thread ring is supplied with a calibration certificate, providing traceable documentation of its conformity to specified dimensions. For which applications is this thread ring suitable? The ring is intended for quick pass/fail checks during incoming inspection, in‑process testing and final quality control of threaded components with M64×3 metric ISO fine threads. Does the gauge conform to recognised standards? The gauge is manufactured to DIN 13 and the tolerance class 6g, making it appropriate for standardised thread verification in industrial contexts. What material is used and how does it affect longevity? Constructed from hardened gauge steel, the ring offers enhanced wear resistance and dimensional stability, ensuring consistent inspection results over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x3 Thread Go/No-Go Plug Gauge For ISO Metric Fine Thread Right-Handed, Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the hardened gauge steel construction and strict DIN 13, 6H conformity for consistent pass/fail inspection of metric fine threads; the gauge is supplied with a calibration certificate, ensuring traceability and immediate use in quality control. Order via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge (No-Go) M64 x 3.0 — Metric ISO fine thread, right-hand, hardened gauge steel The Thread plug gauge (No-Go) M64 x 3.0 is a right-hand inspection gauge designed for rapid acceptance testing and in-process checks of metric ISO fine threads in production and inspection environments Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6H Calibration certificate included Designed for M64 x 3.0 metric fine threads Consistent pass/fail inspection that reduces rework A dedicated no-go thread plug provides an immediate binary check: the gauge must not enter an acceptable thread. Built from hardened gauge steel, this plug resists wear and preserves the pass/fail limit over many cycles, which reduces measurement uncertainty and rework rates on the shop floor. Conformity to DIN 13 and the 6H tolerance class gives a clear, industry-recognised reference for thread acceptance, so production decisions are based on reproducible criteria rather than manual judgement. Robust design for workshop use and repeatable handling Engineered for practical workshop conditions, the gauge is compact yet substantial—its mass of 1.8 kg ensures stable handling and prevents accidental wobble during engagement. The right-hand configuration and the M64 x 3.0 sizing match standard metric fine-thread assemblies used in heavy fastenings and mechanical housings. As a plain Go/No-Go tool (here supplied as the No-Go variant), it simplifies routine checks: if the No-Go enters, the thread is out of tolerance and requires correction, which speeds up decision-making at the machine or bench. Traceable calibration to support quality records The gauge is delivered with a calibration certificate, allowing immediate inclusion in quality documentation and traceability chains. This standard calibration supports internal audit trails and batch release processes without delay. Where documented measurement results are required for compliance or customer records, having the certificate included saves administrative steps and makes the gauge ready for first use in quality control or inspection laboratories. Contact Metav Werkzeuge for technical advice and to request the Metav IndustryLine No-Go thread plug gauge M315.664.8 with calibration certificate for reliable thread inspection and documentation Technical data Article number: M315.664.8 GTIN: 4054469154244 Material: Gauge steel, hardened Thread size: M64 x 3.0 Standard: DIN 13, 6H Weight: 1.8 kg Tariff number: 90173000 Note: No-go (reject) gauge Calibration certificate: included Core figures Thread diameter: 64 mm Thread pitch: 3.0 mm Tolerance class: 6H Mass: 1.8 kg Special features Right-hand metric ISO fine thread Hardened gauge steel construction Supplied with calibration certificate Intended for pass/fail inspection in production and QC GTIN for traceability FAQ What does "No-Go" mean for this thread gauge? A No-Go plug is the reject-side gauge used to verify that a threaded hole does not exceed the maximum material limits; if the No-Go enters, the thread inspected by the Thread plug gauge (No-Go) M64 x 3.0 is out of tolerance. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate, enabling immediate use in documented quality-control processes. Which standard and tolerance does the gauge follow? The gauge is manufactured to DIN 13 and the 6H tolerance class for metric ISO fine threads, providing an established reference for acceptance testing. Can this gauge be used for left-hand threads? No; this item is a right-hand No-Go plug for M64 x 3.0 metric fine threads and is not suitable for left-hand thread forms. How should a failed No-Go check be interpreted? If the No-Go plug enters the thread, the component exceeds the permissible limit and should be rejected or reworked according to the site’s quality procedures; the result from the Thread plug gauge (No-Go) M64 x 3.0 gives a clear pass/fail outcome. Is this gauge suitable for use in production and inspection labs? Yes; with hardened gauge steel construction and the included calibration certificate, the gauge is suitable for both routine production checks and documented inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x4 Thread Go Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise conformity checking and durable construction: the combination of DIN 13, tolerance class 6H and hardened gauge steel ensures repeatable Go/No‑Go inspection for metric ISO fine threads; supplied with a calibration certificate, the gauge supports documented quality assurance. Order the gauge directly via Metav Werkzeuge or consult our advisers for application support. Thread plug gauge GUT M64 x 4.0 — Metric ISO fine thread plug gauge, right‑hand, DIN 13 6H (Metav IndustryLine) A Thread plug gauge GUT M64 x 4.0 for verifying right‑hand metric ISO fine internal threads to DIN 13, providing a robust go gauge for production and incoming‑inspection environments Hardened gauge steel for long service life Manufactured to DIN 13, tolerance class 6H Supplied with calibration certificate Engineered for reliable conformity checks The plug is manufactured for high‑confidence thread inspection, matching the metric ISO fine‑thread profile M64 x 4.0 to DIN 13 with tolerance class 6H. As a GO gauge, it confirms whether an internal thread meets the permitted form and pitch for acceptance; this reduces downstream rework and prevents assembly failures. Engineers and quality managers benefit from a clear, objective pass criterion that integrates directly into standard inspection routines and documentation. Built to last and simple to use in the workshop Produced from gauge steel and thermally hardened, the gauge is designed for repeated use in demanding production and inspection environments. The robust construction delivers sustained dimensional stability and wear resistance, so measurement drift is minimised and calibration intervals can be planned reliably. The compact, single‑piece design simplifies handling during batch checks and speeds up go/no‑go decisions at the control station. Traceable calibration for process assurance The gauge is supplied with a calibration certificate, enabling traceable acceptance records and easing compliance with internal quality plans. Supplied documentation supports quality audits and helps maintain measurement confidence across suppliers and production lines. By integrating a certified inspection tool into the workflow, teams establish measurable process control and reduce the risk of uncertified gauges causing economic loss or customer complaints. For documented precision and reliable thread inspection, request this Metav IndustryLine GO thread plug gauge from Metav Werkzeuge or speak with our specialists at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M315.564.9 GTIN: 4054469154800 Label: Thread plug gauge GUT M64 x 4.0 for metric ISO fine thread, right‑hand Facts Size: M64 x 4.0 Weight: 1.8 kg Tariff code: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13, 6H Type: GO (GUT) plug gauge, right‑hand thread Supplied with calibration certificate FAQ What thread size and pitch does the gauge check? The gauge checks an M64 x 4.0 metric ISO fine internal thread in a right‑hand configuration, conforming to DIN 13 with tolerance class 6H. Is this a GO or NO‑GO instrument? This is a GO (GUT) plug gauge; it verifies that internal threads fall within acceptable form and pitch limits for acceptance. Does the gauge come with calibration evidence? Yes, the thread plug gauge is supplied with a calibration certificate for traceability and documentation of the inspection status. What material and treatment are used? The gauge is made from hardened gauge steel to provide wear resistance and dimensional stability during routine inspection. Can this gauge be used in a production environment? Yes, the robust construction and clear pass/fail criterion make the gauge suitable for production, incoming inspection and quality control stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64x4 Thread Ring Gauge, Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calib. Certificate Included - Metav IndustryLine
Take advantage of a robust, precision‑ground Go ring and hardened gauge steel combined with an included calibration certificate to secure consistent thread inspection. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application guidance. Thread ring gauge GUT M64 x 4.0 — Go ring gauge, right-hand, DIN 13 (Metav IndustryLine) The Thread ring gauge GUT M64 x 4.0 is a right‑hand Go ring designed for quick, reliable acceptance testing of M64 x 4.0 metric fine threads in line with DIN 13 and tolerance class 6g. Go ring gauge, right-hand thread Size M64 x 4.0 metric fine thread DIN 13 tolerance class 6g Hardened gauge steel, precision-ground Calibration certificate included Ensure conclusive Go/No‑Go inspection with standardised criteria A Go ring gauge provides an objective, repeatable check for internal threads: the mandrel must enter without force for a pass. Manufactured to DIN 13 with tolerance 6g, this gauge gives a clear go/no‑go decision that supports fast in‑process checks and final inspections. The precision‑ground profile and nominal sizing reduce measurement uncertainty, enabling production decisions to be taken on sound, comparable data rather than subjective judgement. The included calibration certificate documents conformity and supports traceability in quality systems. Durable construction for repeated shop‑floor use Made from hardened gauge steel and finished by precision grinding, the ring resists wear and maintains profile integrity under frequent use. The robust build and the unit mass of 1.8 kg contribute to stability during handling and inspection cycles, which lowers the need for frequent replacement and helps avoid unplanned downtime. The right‑hand thread orientation and the M64 x 4.0 geometry suit common fine‑thread applications in heavy machinery and assembly fixtures, where repeatability and lifespan are critical. Simple integration into quality workflows and traceability This gauge is supplied ready for use and includes documentation that supports quality records and audit trails. The combination of a standardised thread class, a calibration certificate and a unique SKU/GTIN allows straightforward inventory control and process documentation. Wherever regular sampling or routine acceptance testing is required, the ring gauge performs as a deterministic reference tool that complements dimensional checks and reduces the number of subjective assessments in production. Contact Metav Werkzeuge for specification checks, calibration documentation or tailored procurement from Emmerich — our consultants advise on thread standards and supply options Technical data Article number: M315.764.9 GTIN: 4054469155166 Weight: 1.8 kg Size: M64 x 4.0 Material: Gauge steel, hardened Norm: DIN 13, 6g Tariff number: 90173000 Facts Thread nominal: M64 x 4.0 Tolerance class: 6g Weight: 1.8 kg GTIN: 4054469155166 Special features Go gauge (GUT) Right-hand thread Precision-ground profile Hardened gauge steel Calibration certificate included FAQ What is the purpose of a Go ring gauge? A Go ring gauge verifies that an internal thread meets the minimum acceptance profile; the mandrel must enter freely for a pass. The Thread ring gauge GUT M64 x 4.0 is intended specifically for that acceptance check on M64 x 4.0 internal threads. Does this gauge conform to a recognised standard? Yes, the gauge is manufactured to DIN 13 with tolerance class 6g, ensuring compatibility with standard metric fine‑thread specifications. Is the gauge supplied with calibration documentation? The ring comes with a calibration certificate, which documents the measurement status and supports traceability for quality records. What material is the gauge made from and how does that affect durability? The gauge is made from hardened gauge steel and precision‑ground, which increases wear resistance and preserves the thread profile during repeated inspection cycles. Can this gauge be used for production line checks? Yes, its robust construction, standard DIN compliance and calibration documentation make the gauge suitable for routine production and incoming inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64×4 Go/No‑Go Thread Ring Gauge Metric ISO Fine Pitch Right‑Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction, DIN 13 (tolerance 6g) conformity and an included calibration certificate to secure consistent rejection criteria on metric fine threads; order the No‑Go thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. No‑Go Thread Ring Gauge M64 x 4.0 — Hardened gauge steel, DIN 13 (6g) by Metav IndustryLine The No‑Go Thread Ring Gauge M64 x 4.0 is a right‑hand metric ISO fine‑thread inspection ring designed for fast, unambiguous rejection of out‑of‑tolerance components in production and quality control environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6g No‑Go ring for M64 x 4.0 right‑hand threads Clear pass/fail criteria for production efficiency A dedicated No‑Go ring delivers an immediate, objective decision at the measuring station: parts that enter the ring are classified as rejects. Built to the DIN 13 standard with a 6g tolerance class, this gauge reduces ambiguity in inspection steps and accelerates throughput by removing subjective judgement. The result is fewer downstream rejects, faster quality gates and a measurable improvement in first‑pass yield when the gauge is integrated into routine checks. Material choice that supports repeatability Manufactured from hardened gauge steel, the inspection ring combines surface wear resistance with dimensional stability. The material choice ensures a long service life under repeated handling and contact with threaded parts, keeping the acceptance boundary constant over many production cycles. The robust construction and compact geometry make handling straightforward while preserving repeatable thread control across multiple batches. Traceable calibration for audit readiness Supplied with a calibration certificate, the gauge provides documented traceability for quality systems and internal audits. The certificate confirms the ring’s measured condition at delivery, simplifying incoming inspection procedures and supporting quality records. For traceability chains and compliance documentation, the included calibration paperwork removes uncertainty about the tool’s baseline condition. Practical fit into workshop routines As a right‑hand metric ISO fine‑thread inspection tool for M64 x 4.0, the ring integrates easily into standard inspection benches and GO/NO‑GO workflows. Its compact footprint and clear function streamline bench checks, while the hardened finish minimises maintenance needs. For shops aiming to standardise thread inspection, the ring functions as a reliable control point within a documented QC process and complements other inspection equipment seamlessly. For reliable thread control and documented inspection in your production line, contact Metav Werkzeuge to request the Metav IndustryLine No‑Go thread ring gauge or to arrange technical guidance from our specialists in Emmerich. Technical data Article number: M315.864.9 GTIN: 4054469155340 Description: No‑Go thread ring gauge M64 x 4.0, metric ISO fine thread, right‑hand Material: gauge steel, hardened Standard: DIN 13, 6g Weight: 1.8 kg Facts Thread: M64 x 4.0 Tolerance class: 6g Tariff number: 90173000 Special features No‑Go (reject) inspection ring Right‑hand thread Supplied with calibration certificate FAQ What is the intended use of this inspection ring? The No‑Go thread ring gauge M64 x 4.0 is intended for rejection testing of metric ISO fine threads; it provides a clear fail criterion for production and quality control workflows. Does the gauge come with calibration documentation? Yes, the Metav IndustryLine No‑Go thread ring gauge is supplied with a calibration certificate that documents the ring’s condition at delivery. Which thread standard and tolerance does the ring comply with? The ring complies with DIN 13 and is manufactured to a 6g tolerance class for metric ISO fine threads. Is the ring suitable for continuous workshop use? Constructed from hardened gauge steel, the ring is designed for repeated use and maintains inspection reliability across many cycles in a workshop environment. Is this a Go or No‑Go gauge and how should it be used? This product is a No‑Go ring gauge; parts that fit the ring are classified as rejects, providing an immediate pass/fail decision in inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M64×4 Thread Go Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Includes Calibration Certificate - Metav IndustryLine
Take advantage of precise reject detection and durable construction combined with traceable calibration: the product ensures consistent quality control for metric fine threads, reduces rework and speeds up inspection decisions. Order directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge NO‑GO M64 × 4.0 — right‑hand, metric ISO fine thread (Metav IndustryLine) A NO‑GO thread plug gauge (M64×4) designed for quick rejection checks in production and inspection environments No‑go plug gauge for M64×4 threads Conforms to DIN 13, 6H tolerance Hardened gauge steel construction Supplied with calibration certificate Rapid rejection checks that protect production quality A dedicated no‑go plug gauge in M64×4 format provides an immediate go/no‑go verdict at the shop floor checkpoint. The gauge is manufactured to DIN 13, 6H, which defines the tolerance and pitch class for metric fine threads, so measurements are comparable across suppliers and inspection stations. As a simple, hands‑on control device, the tool removes ambiguity from visual checks and accelerates decision‑making in assembly and incoming inspection tasks while lowering the risk of field failures. Documented accuracy for audit‑grade inspection routines Delivered with a calibration certificate, this plug gauge supports traceable measurement records and formal quality documentation. The certificate evidences that the gauge has been checked against defined standards, helping to reduce measurement uncertainty in batch acceptance procedures and facilitating compliance during internal or external audits. For production lines that require repeatable, documented checks, the supplied paperwork minimises administrative follow‑up and strengthens quality assurance processes. Robust materials and form for enduring shop‑floor use Constructed from hardened gauge steel, the instrument resists wear and maintains thread profile integrity through repeated engagement. The right‑hand orientation and the intended reject (no‑go) function make it straightforward to integrate into routine inspection stations: a tactile pass/fail result replaces subjective judgement and cuts inspection time. At approximately 1.8 kg, the tool has enough mass for stable handling without being cumbersome; its resilient construction reduces the frequency of replacement and supports long service intervals in industrial environments. For consistent, production‑grade threaded part inspection choose the Metav IndustryLine NO‑GO plug gauge and contact Metav Werkzeuge for tailored advice or to discuss integration into existing QC routines. Technical data SKU: M315.664.9 GTIN: 4054469154985 Article: Thread plug gauge NO‑GO M64 × 4.0, right‑hand Core data Thread size: M64 × 4 Weight: 1.8 kg Tariff code: 90173000 Standard: DIN 13, 6H Special features Material: hardened gauge steel Function: reject / no‑go plug gauge Supplied with calibration certificate Category: Lehren (gauges) Category: Messstifte FAQ What is the intended use of this plug gauge? This plug gauge is intended for go/no‑go verification of internal M64×4 metric ISO fine threads; it provides a definitive reject check during incoming or in‑process inspection. Does the gauge come with traceable documentation? Yes — the gauge is supplied with a calibration certificate, which documents the inspection and supports traceability for quality records. To which standard does the thread tolerance conform? The thread profile is manufactured to DIN 13, 6H, ensuring compatibility with standard metric ISO fine‑thread specifications. Is this a GO gauge or a NO‑GO gauge? The tool is a NO‑GO (reject) plug gauge intended to detect threads that exceed acceptable limits; it is not a go gauge. What is the product identifier for ordering and reference? Order by SKU M315.664.9 (Thread plug gauge NO‑GO M64 × 4.0, Metav IndustryLine) to ensure the correct item is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com