Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M65x1.5 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened, gauge‑steel inspection tool designed for M65 × 1.5 metric fine threads and supplied with a traceable calibration certificate to secure consistent acceptance testing on the shop floor. Order the plug gauge directly via Metav Werkzeuge or consult the Metav team for application support. Thread plug gauge GUT M65 × 1.5 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread plug gauge GUT M65 × 1.5 is a hardened GO inspection plug intended for verification of right‑hand metric ISO fine internal threads to DIN 13 (tolerance class 6H). Metric fine thread M65×1.5, right‑hand Hardened gauge steel construction Comes with calibration certificate Made to DIN 13, tolerance class 6H Ensure acceptance with a purpose‑built GO plug A GO plug of this size is the straightforward way to verify whether a threaded bore meets the specified limits. The calibrated M65 × 1.5 gauge checks form and pitch against DIN 13 and the 6H tolerance class, thereby providing an immediate go/no‑go decision at the inspection point. This direct check removes ambiguity from visual inspection, shortens test cycles and supports a predictable production flow by identifying non‑conforming threads before assembly. Tough construction for repeatable measurements Manufactured from hardened gauge steel, the gauge keeps its reference form during routine use and resists wear that would otherwise affect fit assessment. The robust construction ensures repeatable measurements over many cycles, reducing the need for frequent replacement. A stable material and precise machining minimise profile deviations so that acceptance criteria remain reproducible across shifts and operators. Traceable calibration for quality management Delivered with a calibration certificate, the gauge provides documented traceability for quality systems and external audits. The certificate records the measurement status at the point of delivery, enabling seamless integration into inspection plans, sampling routines and audit trails. Traceability supports process control decisions and helps to demonstrate consistent compliance with internal and customer requirements. Practical integration into inspection workflows This GO plug is suited to final part inspection, first‑article checks and in‑process spot testing in toolrooms and production lines where metric fine threads are used. Its simple pass/fail logic makes it ideal for high‑throughput environments and for operators who require fast, reliable results without complex measuring procedures. When combined with a clear inspection routine, the gauge contributes to lower rework rates and a steadier output quality. Choose Metav IndustryLine’s GUT M65 × 1.5 for robust thread inspection; contact Metav Werkzeuge GmbH in Emmerich for technical advice or to arrange supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.565.6 GTIN: 4054469152103 Weight: 1.8 kg Tariff code: 90173000 Facts Thread size: M65 × 1.5 Thread direction: Right‑hand Standard: DIN 13, tolerance class 6H Material mass/designation: M65x1,5 Special features Material: Hardened gauge steel Delivered with calibration certificate Product label: Gewinde‑Lehrdorn GUT M 65 X 1,5 für metrisches ISO‑Feingewinde, rechts Category: Gauges / Plug gauge FAQ What is the purpose of a GO plug gauge for fine threads? A GO plug gauge provides a definitive pass/fail check for internal threads; the Thread plug gauge GUT M65 × 1.5 confirms whether a bore meets the specified limits for an M65 × 1.5 metric ISO fine thread. Does the gauge arrive calibrated? Yes, the unit is supplied with a calibration certificate that records its measurement status and supports traceability in inspection records. Which standard does this plug gauge conform to? The gauge is manufactured to DIN 13 and evaluated for the 6H tolerance class, making it suitable for standard metric ISO fine threads. Can this gauge be used for production sampling? The gauge is designed for production inspection and sampling; its simple go/no‑go assessment speeds up decision making and helps to reduce downstream rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x1.5 Thread Go Ring Gauge ISO Fine Right-Handed Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the proven combination of hardened gauge steel construction, compliance with DIN 13 (6g) and an included calibration certificate for reliable, traceable thread verification in production and inspection. Order the gauge directly via Metav Werkzeuge or consult the team for application advice. Thread ring gauge GUT M65 x 1.5 — Metric ISO fine thread gauge, right-hand, hardened steel A Thread ring gauge GUT M65 x 1.5 designed to verify acceptance of metric ISO fine threads in quality control and workshop inspection tasks. DIN 13, tolerance 6g Hardened gauge steel construction Includes calibration certificate For metric M65 x 1.5 right-hand threads Reliable conformity checking with a hardened gauge The ring is manufactured from hardened gauge steel, delivering high wear resistance and stable geometry for repeated use in inspection routines. Built to DIN 13 (6g), this go ring gauge verifies the acceptance condition of fine threads, ensuring components meet the specified tolerance class. The compact, mass‑balanced design supports consistent seating in the thread under test, reducing measurement variation and securing process stability in series production and incoming inspection. Traceability and reduced rework through certified calibration Supplied with a calibration certificate, the gauge provides documented traceability that supports quality systems and audit requirements. The documented verification of conformity reduces uncertainty during first‑article inspections and helps to lower the rate of rework by confirming thread acceptability at source. Integration of a calibrated control element into the inspection workflow offers a clear, rational benefit: faster decision making with documented evidence for compliance. Practical fit for production and workshop environments Designed for use on right‑hand metric ISO fine threads, the gauge is optimised for quick pass/fail checks on assemblies, machined parts and fixtures. The robust material and finish ease handling and maintenance in busy inspection stations, while the ring form factor allows straightforward visual and tactile control of threaded components. This makes the tool especially suitable where repeatable verification and throughput efficiency are priorities. For assured thread verification and documented traceability, request the Metav IndustryLine, calibration-backed ring gauge via Metav Werkzeuge—phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.765.6 GTIN: 4054469152585 Designation: Thread ring gauge GUT M65 x 1.5 Facts Material: hardened gauge steel Standard: DIN 13, 6g Weight: 1.8 kg Special features Right-hand metric ISO fine thread Includes calibration certificate "Go" gauge functionality FAQ What is the primary use of this ring gauge? The ring gauge is intended for acceptance testing of metric ISO fine threads and functions as a go gauge to confirm conformity to the DIN 13, 6g tolerance class. Is the gauge delivered calibrated? Yes, the gauge is supplied with a calibration certificate, providing traceability and documentation suitable for quality systems and inspections. Which material is the gauge made from and why does that matter? Manufactured from hardened gauge steel, the gauge offers wear resistance and dimensional stability for repeatable inspections over time. Can this gauge be used in production for fast pass/fail checks? The ring form and hardened construction make it well suited for rapid pass/fail verification at production stations and incoming goods inspection. What is the exact thread size covered by the gauge? The gauge is specified for metric ISO fine thread M65 x 1.5, right-hand. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x1.5 Thread Go Ring Gauge Metric ISO Fine Right-Hand Hardened Gauge, Calibrated Certificate, DIN 13 6g - Metav IndustryLine
A hardened, standards‑compliant no‑go ring provides reliable rejection control for right‑hand metric ISO fine threads; combined with a supplied calibration certificate and DIN 13 (6g) tolerancing, it supports traceable quality assurance. Secure the No‑Go Thread Ring Gauge M65 x 1.5 via Metav Werkzeuge or consult our specialists for specification advice. No‑Go Thread Ring Gauge M65 x 1.5 — hardened gauge steel, DIN 13 (6g) | Metav IndustryLine The No‑Go Thread Ring Gauge M65 x 1.5 is a right‑hand metric ISO fine‑thread gauge intended for rejecting out‑of‑tolerance internal threads during production and incoming inspection No‑go ring gauge M65 x 1.5 for metric ISO fine threads Hardened gauge steel for durable inspection Supplied with calibration certificate Manufactured to DIN 13, tolerance 6g Consistent reject control through robust construction The solid, hardened gauge steel body ensures dimensional stability under repetitive use, so rejection decisions remain consistent shift after shift. Designed specifically as a no‑go ring, this tool confirms whether an internal thread exceeds the allowed maximum material condition; if the no‑go does not enter, the thread passes the reject threshold. The short decision path reduces operator interpretation and speeds up process flow, supporting efficient in‑line quality checks without compromising reproducibility. Traceable calibration that fits audit requirements Delivered with a calibration certificate, the gauge documents measurement traceability and supports quality management systems. The accompanying paperwork records the inspection basis and date, enabling straightforward audit trails and periodic recalibration scheduling. For manufacturers who demand documented tolerancing, the combination of a hardened ring and an issued calibration sheet simplifies acceptance procedures and helps maintain compliance with internal and external inspection routines. Standards alignment to simplify inspection criteria Manufactured to DIN 13 with a 6g tolerance, this gauge aligns with common metric thread standards used across mechanical engineering and component supply chains. Its specification as a right‑hand, fine‑pitch thread ring (M65 x 1.5) matches typical applications in machine housings and hydraulic fittings where precise engagement is critical. Using a standards‑matched reject gauge reduces ambiguity in supplier verification and harmonises communication across production, purchasing and quality teams. Practical design for workshop and production use The compact, ready‑to‑use ring is suitable for bench inspection and on‑line checks in workshops and production cells. The hardened finish limits wear, prolonging service life and reducing replacement frequency; this supports lower total cost of ownership and predictable inspection intervals. As a dedicated reject gauge it eliminates guesswork in go/no‑go decisions, helping teams keep throughput high while preventing out‑of‑spec parts from progressing through assembly. Secure this Metav IndustryLine no‑go thread ring gauge for M65 x 1.5 to reinforce traceable thread rejection control; contact Metav Werkzeuge in Emmerich for further specification support or to arrange purchase details via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M315.865.6 GTIN: 4054469152820 Weight: 1.8 kg Material: Gauge steel, hardened Thread: M65 x 1.5 Standard: DIN 13, 6g Tariff number: 90173000 Facts Right‑hand metric ISO fine thread No‑go / rejection gauge Supplied with calibration certificate Durable hardened surface Special features Intended for production and incoming inspection Reduces subjective decision‑making during checks Traceability for quality systems Compact, ready‑to‑use design FAQ What is the primary function of this ring gauge? The no‑go ring gauge is used to confirm whether an internal thread exceeds the maximum permissible limits; the No‑Go Thread Ring Gauge M65 x 1.5 from Metav IndustryLine indicates rejection when it enters the thread. Is a calibration certificate included with delivery? Yes, the gauge is supplied with a calibration certificate to document its measured condition at the time of issue and to support traceability in quality records. Which industry standard does the gauge comply with? The ring is manufactured to DIN 13 with a 6g tolerance class, matching common metric ISO fine‑thread specifications. Can this tool be used on left‑hand threads? No; this item is specified as a right‑hand thread gauge and is not suitable for left‑hand thread inspection. How should the gauge be handled to maintain accuracy? Handle the hardened ring with care, avoid impacts and store it clean and dry; periodic recalibration is recommended to maintain documented measurement confidence. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x1.5 Thread Go/No-Go Plug Gauge Metric ISO Fine Right Hand, Calibrated Certificate, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of strict reject control, hardened gauge steel construction and traceable calibration for reliable thread inspection. The tool ensures consistent detection of out-of-tolerance fine threads and is delivered with a calibration certificate; order the thread plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge (NO‑GO) M65 x 1.5 — right‑hand metric ISO fine thread, Metav IndustryLine Thread plug gauge (NO‑GO) M65 x 1.5 — a compact, hardened inspection gauge for right‑hand metric ISO fine threads used in workshop and inspection environments NO‑GO restriction for clear rejection criteria Hardened gauge steel for long service life Conforms to DIN 13, 6H inspection class Supplied with traceable calibration certificate Prevent assembly failures with definitive reject control This no‑go thread plug gauge is designed to identify threads that exceed tolerance limits and must be rejected before assembly. By providing an immediate, binary check—either the gauge enters (GO) or it does not (NO‑GO)—the device removes ambiguity from routine inspections. Built for the specific pitch and diameter of M65 x 1.5, the gauge supports rapid in‑process checks and final acceptance testing, lowering the risk of component mismatch and subsequent production stoppages. The clear mechanical function eliminates interpretation errors and streamlines the quality workflow. Durable construction for consistent measurement results Manufactured from hardened gauge steel, the tool resists wear and maintains its geometry under frequent use, ensuring repeatable results on the shop floor. The hardened finish reduces the need for frequent replacement, which is particularly beneficial in high‑volume inspection lanes. The specification DIN 13, 6H indicates the tolerance and thread form the gauge is intended to check, so inspectors can rely on the gauge’s compatibility with standard metric‑fine applications. Robust construction also simplifies handling and cleaning, keeping downtime and maintenance predictable. Traceability and quality assurance backed by calibration A supplied calibration certificate documents the dimensional check carried out prior to delivery, enabling traceability within quality management systems and meeting internal audit requirements. The certificate accompanies the gauge and supports documentation for batch release or supplier inspection tasks. For customers who operate formal quality systems, the calibration evidence helps maintain conformity and provides confidence that the rejection criterion used on the production line is verifiable and reproducible. For bespoke inspection plans, the gauge can be integrated into existing procedures as a clear go/no‑go criterion. Contact Metav Werkzeuge in Emmerich for tailored advice, delivery details or to request further documentation on the Metav IndustryLine thread plug gauge M65 x 1.5 and its suitability for specific inspection tasks Technical data Article number: M315.665.6 GTIN: 4054469152349 Label: Thread plug gauge NO‑GO M65 x 1.5, right‑hand Manufacturer: Metav IndustryLine Facts Size: M65 x 1.5 Weight: 1.8 kg Standard: DIN 13, 6H Tariff number: 90173000 Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Delivered with calibration certificate Category: Gauges / Thread inspection plug FAQ What is the purpose of this gauge? The thread plug gauge is a NO‑GO inspection tool for detecting out‑of‑tolerance right‑hand metric ISO fine threads; it provides a clear rejection criterion for M65 x 1.5 threads. Which standard does the gauge comply with? The gauge is manufactured for inspection to DIN 13, 6H, ensuring compatibility with the standard metric fine thread form and tolerance class. Is the gauge supplied with calibration documentation? Yes, the gauge is delivered with a traceable calibration certificate that documents the inspection prior to shipment. Can this gauge be used for production and final inspection? The tool is suitable for both in‑process checks and final acceptance testing where a definitive NO‑GO check for M65 x 1.5 is required. How should the gauge be stored and maintained? Keep the gauge clean and dry, protect the thread form from impacts, and store in a protective wrap or box to preserve the hardened surface and maintain calibration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x2 Thread Gauge Ring Go, Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
The product data are inconsistent: the item is simultaneously flagged as both scrap and good, so a reliable product description cannot be generated from these contradictory status indications. This inconsistency creates confusion and prevents accurate processing or categorisation of the item. Without a clear and definitive status, it is impossible to determine whether the item should be treated as usable or discarded. Please review the item's condition thoroughly, ensure that the correct status is applied, and resubmit the corrected data. Accurate and consistent information is essential to avoid delays and ensure proper handling of the product in future processes.
M65x2 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and the precise M65 × 2.0 metric fine thread tolerance to maintain reliable incoming‑inspection routines; the calibrated Go plug gauge is supplied with a traceable calibration certificate and can be ordered directly via Metav Werkzeuge or discussed with our specialists for application support Go thread plug gauge M65 × 2.0 — right-hand, DIN 13 (Metav IndustryLine) Go thread plug gauge M65 × 2.0 for verifying metric ISO fine internal threads; right‑hand execution suitable for quality control in production and inspection environments Hardened gauge steel construction Metric ISO fine thread M65 × 2 Right-hand Go gauge, DIN 13 6H Supplied with calibration certificate Consistent pass/fail decisions for fine threads A calibrated Go plug gives a clear, objective verdict on internal threads by confirming the acceptance limit defined for a M65 × 2.0 metric fine thread. Manufactured from hardened gauge steel, the tool resists wear and preserves its dimensional stability during repetitive use, which reduces rework and line stoppages. The DIN 13 tolerance marking 6H ensures compatibility with standardised thread gauges and drawing specifications, so inspection personnel can make fast, reliable pass/fail judgements without additional measurement steps. Designed for durable shop‑floor performance The plug's robust material and machining deliver long service life under routine handling. A stable body and precise flank geometry minimise the risk of false rejects caused by gauge distortion. This results in fewer tool replacements and lower lifecycle cost compared with non‑hardened equivalents. The compact, single‑piece design simplifies storage and handling while the clear identification (nominal size M65 × 2.0, right‑hand) speeds up selection during multi‑gauge audits, supporting efficient quality workflows. Traceability and conformity for audit readiness Supplied with a calibration certificate, the gauge provides documented traceability for inspection records and internal audits. Calibration documentation confirms the tool’s conformity to inspection requirements and supports quality management systems. Where formal record keeping is required, the certificate reduces administrative effort and demonstrates adherence to measurement control procedures. For customers seeking audit‑ready inspection tools, the included documentation is a practical benefit that closes the loop between production and quality assurance. Practical integration in inspection routines The plug gauge is intended as a go/no‑go verification instrument for internal threads; it is not a measuring device for producing quantitative diameter readings. Installed as part of a standard inspection station, the gauge complements dimensional checks performed with calipers or thread gauges and fits into established quality processes with minimal training. For repeat testing on batches or incoming parts, the hardened construction and clear nominal marking help maintain throughput while ensuring consistent acceptance criteria. Contact Metav Werkzeuge for tailored advice on integrating this calibrated M65 Go plug gauge into inspection plans and to request availability for your workshop Technical Data SKU: M315.565.7 GTIN: 4054469153063 Article: Go thread plug gauge M65 × 2.0 Thread direction: Right-hand Measurements / Core Data Thread size: M65 × 2.0 Tolerance standard: DIN 13, 6H Weight: 1.8 kg Tariff code: 90173000 Materials / Special Features Material: hardened gauge steel Calibration: supplied with calibration certificate Gauge type: Go (GUT) Category: gauges / plug gauges FAQ What exactly does the Go plug gauge check? The Go thread plug gauge M65 × 2.0 checks whether an internal metric ISO fine thread meets the acceptance limit for a right‑handed M65 × 2 thread; a smooth fit indicates conformance. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate that documents traceability and supports quality records for the Go thread plug gauge M65 × 2.0. Can this gauge be used for several materials or only one? The plug gauge is made from hardened gauge steel and is suitable for routine inspection of internal threads regardless of the workpiece material; care should be taken with abrasive or contaminated threads to avoid premature wear. How should the gauge be stored to keep accuracy? Store the gauge clean and dry in a protective box or drawer and avoid impacts; the hardened material preserves accuracy but correct handling and the supplied calibration certificate help maintain traceability. Is this a measuring instrument for exact thread dimensions? No; the Go plug gauge provides a go/no‑go check against the acceptance limit for the nominal thread. For dimensional measurement, use a calibrated measuring instrument such as a thread micrometer or precision caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x2 Thread Go Gauging Mandrel For ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6H, With Calibration Certificate - Metav IndustryLine
Take advantage of fast, unequivocal thread rejection and long-term traceability thanks to hardened gauge steel and an included calibration certificate — ideal where rejected threads must be identified reliably. Order the plug gauge directly via Metav Werkzeuge or consult the sales team for application support. Thread No-Go Plug Gauge M65 × 2.0 — metric ISO fine thread, right-hand (Metav IndustryLine) The Thread No-Go Plug Gauge M65 × 2.0 is a right-hand plug gauge intended for conformity testing of metric ISO fine threads in production and incoming inspection. ISO 6H tolerance according to DIN 13 Hardened gauge steel for workshop durability Delivered with calibration certificate Right-hand metric fine thread M65 × 2.0 Ensure out-of-tolerance threads are detected before assembly This No-Go plug gauge operates as a decisive quality gate: it will not pass threads that exceed the ISO 6H limit defined in DIN 13, so non-conforming parts are flagged immediately. The mechanical simplicity of a plug gauge converts dimensional checks into a single, unambiguous acceptance step, reducing inspection time and lowering the risk of incorrect assemblies. The direct-effect of faster go/no-go verification is a leaner inspection flow and fewer downstream failures. Traceable measurements for consistent quality control A calibration certificate accompanies delivery, ensuring each inspection result can be traced back to a recognised reference. Traceability supports audit requirements and process documentation in serial production environments, while the certificate documents initial conformity following the supplied calibration. This certified start point helps maintain stable acceptance criteria across shifts and suppliers, improving reproducibility and granting confidence in lot releases and supplier quality management. Robust design for repeated shop-floor use Manufactured from hardened gauge steel, the gauge resists wear under frequent handling, preserving the reference profile across many inspection cycles. Its right-hand execution and metric fine pitch are optimised for M65 × 2.0 threads, and the compact, tool-steel geometry keeps handling straightforward for workshop staff and inspectors. Built for durability, the gauging solution reduces downtime for replacement and supports reliable go/no-go checks in harsh workshop conditions. Fit within inspection routines and procurement strategies This plug gauge suits quality managers, production engineers and incoming‑goods teams who require clear acceptance criteria without complex measuring equipment. Integrating the gauge into receiving inspections, in‑process checks or final control reduces reliance on time-consuming measurements while keeping documented proof of compliance. As part of a broader metrology strategy, it complements dimensional checks and helps to triage parts that warrant further investigation or full measurement. For specification advice, availability or procurement assistance for the Metav IndustryLine thread gauge, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com — and secure the right gauging solution for production control. Technical data Article number: M315.665.7 GTIN: 4054469153278 Tariff code: 90173000 Facts Thread size: M65 × 2.0 Tolerance: ISO 6H Standard: DIN 13 Weight: 1.8 kg Design & features Material: gauge steel, hardened Function: No-Go (reject) plug gauge Hand: right-hand thread Delivery: including calibration certificate Category: plug gauge for metric ISO fine threads Brand: Metav IndustryLine FAQ What is the purpose of this No-Go plug gauge? The No-Go plug gauge is used to detect threads that exceed the maximum allowed limits; the Thread No-Go Plug Gauge M65 × 2.0 will not pass threads that are too large according to ISO 6H/DIN 13. Does the gauge come with traceable documentation? Yes, the gauge from Metav IndustryLine is delivered with a calibration certificate, providing traceability for inspection records. Can this plug gauge be used on any M65 thread? The gauge is designed specifically for M65 × 2.0 metric fine threads with tolerance class ISO 6H; use should be limited to right-hand threads matching these specifications. How durable is the plug gauge for shop-floor use? Constructed from hardened gauge steel, the gauge provides durable service under normal inspection handling and is suitable for repeated go/no-go checks in production environments. What is the article number for ordering and reference? Refer to article number M315.665.7 when ordering or requesting technical data sheets for the Metav IndustryLine plug gauge. Is the plug gauge suitable for incoming inspection and final control? Yes, the plug gauge supports both incoming inspection and final control by offering a quick, unambiguous acceptance criterion for threaded parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x2 Thread Go Ring For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of durable hardened gauge steel, precise DIN 13, 6g tolerance and a supplied calibration certificate for reliable go/no‑go inspection of metric fine threads; order the gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread Ring Gauge GUT M65 x 2.0 — Go gauge for metric ISO fine threads, right-hand, hardened gauge steel (DIN 13, 6g) The Thread Ring Gauge GUT M65 x 2.0 is a calibrated go gauge designed for production inspection and quality control of metric ISO fine threads in right‑hand form. Hardened gauge steel construction Calibrated delivery with certificate Conforms to DIN 13, tolerance 6g Size M65 x 2.0, right‑hand thread Durable construction for repeatable thread inspection Made from hardened gauge steel, the ring gauge delivers robustness and long service life under frequent use in production environments. The material choice reduces wear and preserves the thread form over time, which in turn supports consistent go/no‑go decisions on the shop floor. The hardening process also helps maintain gauge geometry during handling, so inspection results remain reproducible even after repeated cycles. Traceable accuracy and quality assurance Supplied with a calibration certificate, the gauge enables traceable quality documentation for incoming inspection and process control. The certificate confirms the gauge was checked before delivery and provides evidence for internal quality systems. Conformity to DIN 13, 6g defines the acceptance limit used in production, making this gauge suitable where standardised tolerance classes are required for metric ISO fine threads. Practical role in workshop and production workflows As a dedicated go gauge, this ring is intended for a simple and fast verification step during manufacturing or final inspection: parts that pass the go gauge meet the minimum functional thread requirement. The compact, single‑purpose design supports quick throughput checks without complex readouts or adjustments, reducing measurement time and limiting operator influence on the decision process. Suitability and application areas The gauge’s M65 x 2.0 size and right‑hand configuration make it appropriate for components with metric fine threads commonly found in machine construction, hydraulic fittings and precision assemblies. Its specification aligns with routine quality assurance tasks and line‑inspection points where a straightforward go/no‑go verdict protects against assembly faults and avoids downstream rework. Contact Metav Werkzeuge for tailored application advice, factory stock information and to arrange supply of the Metav IndustryLine thread ring gauge with calibration certificate Technical Data SKU: M315.765.7 GTIN: 4054469153650 Manufacturer: Metav IndustryLine Label: Thread ring gauge GUT M65 x 2.0, metric ISO fine thread, right-hand Core specifications Size: M65 x 2.0 Tolerance/class: DIN 13, 6g Weight: 1.8 kg Tariff code: 90173000 Materials & features Material: hardened gauge steel Right‑hand thread Supplied with calibration certificate Go gauge (GUT) FAQ What tolerance standard does this ring gauge follow? The ring gauge follows DIN 13, 6g as its acceptance class, which defines the dimensional limits for the metric ISO fine thread inspected by this gauge. Is a calibration certificate included with delivery? Yes, the Thread Ring Gauge GUT M65 x 2.0 is supplied with a calibration certificate, confirming inspection prior to dispatch and enabling traceability in quality records. For which applications is this gauge intended? This go gauge is designed for production inspection and quality control of right‑hand metric fine threads, for example in machine elements, hydraulic components and precision assemblies. How should the gauge be used during inspection? Use the gauge as a go/no‑go check: the part must engage the go ring without excessive force to confirm the minimum functional thread form; any resistance beyond normal fit indicates non‑conformance. Does the gauge require special storage or handling? Store the ring in a dry, clean environment and handle it by non‑abrasive surfaces to protect the hardened thread flanks; the supplied calibration certificate should be retained with the gauge’s quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x3 Thread Go Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated - Metav IndustryLine
Take advantage of precise, standard‑compliant thread inspection combined with robust, hardened construction and a supplied calibration certificate to keep assembly lines moving with fewer rejects; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge GUT M65 × 3.0 — right‑hand Go ring gauge, DIN 13, 6g (Metav IndustryLine) A Thread Ring Gauge GUT M65 × 3.0 designed for fast acceptance checks of metric ISO fine threads in production and inspection environments Hardened gauge steel construction For metric ISO fine thread M65 × 3 Tolerance class DIN 13, 6g Delivered with calibration certificate Reliable acceptance checks to reduce downstream rejects The Go ring gauge serves as a rapid, unequivocal acceptance tool for threaded components: a correct fit confirms that external threads meet the specified limits. Manufactured from hardened gauge steel, the device resists wear during repeated use, ensuring that the pass condition remains stable over many cycles. In practice, this translates into fewer measurement disputes, lower scrap rates and a smoother production flow when the gauge is used for in‑line quality control or final inspection. Durable construction for continuous shop‑floor use Robust material choice and heat treatment deliver a stable measuring boundary that withstands handling and frequent use. The hardened gauge steel body minimises dimensional change from abrasion, while the ring geometry preserves the thread form during engagement. For workshops and small series production, this durability reduces the need for frequent replacement gauges and supports predictable maintenance cycles — an advantage for planners who need reliable tooling availability. Clarity through standards: what DIN 13, 6g means for production Tolerance class DIN 13, 6g defines the acceptance window for metric ISO threads; using a ring gauge manufactured to this standard provides an objective reference against the drawing specification. The gauge verifies the maximum material condition permitted for the external thread, making it ideal for Go/No‑Go protocols where a Go dimension confirms acceptability. This objective standardisation simplifies communication across quality, production and purchasing teams. Simple integration into inspection routines and traceability Supplied with a calibration certificate, the gauge can be incorporated immediately into official inspection records and quality management systems. Traceability is maintained by recording the article number and calibration data, supporting audit requirements and preventing ambiguity in supplier or internal inspections. The compact nature of ring gauges also means they are straightforward to store and to include in first‑piece inspections or sample checks on the shop floor. Choose Metav IndustryLine’s ring gauge to secure thread conformity at critical control points — contact Metav Werkzeuge for calibration details and prompt dispatch from Emmerich. Technical data Article number: M315.765.8 GTIN: 4054469154442 Size: M65 × 3 Material: Gauge steel, hardened Standard: DIN 13, 6g Numerical data Weight: 1.8 kg Tariff number: 90173000 Special features Go (acceptance) ring gauge Supplied with calibration certificate Manufacturer: Metav IndustryLine FAQ What is the primary use of this ring gauge? The ring gauge is used as a Go (acceptance) check for external metric ISO fine threads and confirms compliance with the drawing limits for M65 × 3 threads. Is the gauge delivered ready for inspection use? Yes, the gauge is supplied with a calibration certificate so it can be entered into quality records and used immediately for traceable inspections. Which tolerance class does the gauge represent? This device conforms to DIN 13, 6g, providing a standardised acceptance condition for threads produced to that tolerance class. What material is the gauge made from and why does that matter? Manufactured from hardened gauge steel, the ring gauge offers wear resistance and dimensional stability necessary for repeated shop‑floor checking. Can this gauge be used for left‑hand threads? No, the item is specified as a right‑hand Go ring gauge for metric ISO fine threads; left‑hand variants must be ordered separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x3 Thread Go/No-Go Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Choose the combination of hardened gauge steel, DIN 13, 6H compliance and a supplied calibration certificate for reliable thread inspection; order the no‑go thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. No‑go thread plug gauge M65 x 3.0 – metric ISO fine thread, right‑hand (Metav IndustryLine) A No‑go thread plug gauge M65 x 3.0 engineered for pass/fail inspection of metric ISO fine threads in production, incoming goods control and quality assurance. No‑go design for pass/fail thread inspection Hardened gauge steel for wear resistance Delivered with calibration certificate Ensure rejected parts are caught before assembly A dedicated no‑go plug provides an unequivocal check for oversized or out‑tolerance internal threads. By fitting only when a thread exceeds the allowed limits, the tool enables immediate pass/fail inspection, reducing rework and avoiding assembly faults. Compliance with DIN 13, 6H gives a recognised benchmark for fine metric threads and supports consistent quality decisions on the shop floor. Built for repeated use in industrial environments Constructed from hardened gauge steel, the mandrel resists wear and maintains dimensional stability under frequent handling, which preserves measurement integrity over time. The right‑hand, fine‑pitch M65 x 3.0 geometry suits larger metric components where repeatable checking is essential; the robust design minimises maintenance and supports steady throughput in production and inspection stations. Traceability and audit readiness for quality systems Delivered with a calibration certificate, the gauge supports traceable measurement records and documented control plans. This traceability aids internal quality audits and supplier assessments, providing confidence in measurement results and simplifying compliance documentation. The combination of durable material and certified calibration offers both practical longevity and administrative reassurance. Request technical advice from Metav Werkzeuge or arrange supply of the M65 no‑go thread plug gauge through our Emmerich specialists for dependable inspection capacity Technical Data Article number: M315.665.8 GTIN: 4054469154251 Material: gauge steel, hardened Thread: M65 x 3.0 Standard: DIN 13, 6H Weight: 1.8 kg Special: calibration certificate included Facts Tariff number: 90173000 Special features No‑go plug gauge (AUSSCHUSS), right‑hand Hardened gauge steel construction Metric ISO fine thread application Supplied with calibration certificate FAQ What does a no‑go plug gauge check? A no‑go plug gauge is used to detect oversize or out‑tolerance internal threads; the No‑go thread plug gauge M65 x 3.0 by Metav IndustryLine ensures immediate pass/fail decisions during inspection. Which thread standard is covered by this gauge? The gauge is made to check metric ISO fine threads and conforms to DIN 13, 6H for consistent reference dimensions. Is the gauge supplied calibrated? Yes, the tool is delivered with a calibration certificate, providing traceability and documentation for quality records. Is this gauge suitable for production and incoming inspection? The hardened construction and clear go/no‑go function make the M65 no‑go plug suitable for both production line checks and incoming goods inspection. What material is used and how durable is the gauge? Manufactured from hardened gauge steel, the plug is designed for wear resistance and repeated use in industrial inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x3 Thread Go/No-Go Plug Gauge Metrical ISO Fine Thread Right, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise, rapid thread verification and robust material construction to keep inspection routines efficient and reproducible; the gauge is supplied with a calibration certificate for traceable acceptance testing. Order the Go thread plug gauge directly via Metav Werkzeuge or ask the consultants if needed. Go thread plug gauge M65 x 3.0 (GUT) — ISO metric fine, right‑hand — Metav IndustryLine The Go thread plug gauge M65 x 3.0 is a hardened gauge‑steel plug designed for quick Go checks of ISO metric fine threads in production and inspection environments. Hardened gauge steel construction DIN 13 compliant, tolerance 6H Right‑hand ISO metric fine thread M65 x 3 Supplied with calibration certificate Fast, repeatable thread verification on the shop floor A dedicated Go thread plug gauge like this is designed for fast verification of internal threads, allowing operators to check conformity in seconds rather than minutes. The hardened body resists wear, so pass/fail checks remain consistent over many cycles; this reduces stoppages and helps maintain production throughput. Used at incoming inspection or on the shop floor, the gauge provides a reliable mechanical limit for thread acceptance without the need for complex measuring setups. Assured conformity to DIN tolerances and durable construction Manufactured to DIN 13 with a 6H tolerance, the gauge is matched to the standard ISO metric fine‑thread series and thus represents the nominal acceptance limit for mating parts. The hardened gauge steel construction ensures dimensional stability under routine use and resists deformation that would otherwise compromise repeatability. Clarifying the standard and material helps integrate the tool into quality plans and drawing notes where specified tolerances must be enforced. Calibrated delivery supports traceable quality control The item is supplied with a calibration certificate, which documents the delivered condition and enables traceability in quality records. Traceable calibration supports audit requirements and simplifies acceptance into inspection equipment lists; the certificate can be retained with control plans or batch documentation. For routine handling, the plug gauge functions as a quick go‑limit reference, helping to reduce rework and align shop‑floor checks with laboratory‑level verification. For procurement or technical advice on this Metav IndustryLine Go thread plug gauge, please contact Metav Werkzeuge to arrange supply and documentation support. Technical data Article number: M315.565.8 GTIN: 4054469154060 Weight: 1.8 kg Material: Gauge steel, hardened Thread size: M65 x 3, right‑hand Facts Nominal size: M65 × 3 Tolerance: 6H (DIN 13) Tariff code: 90173000 Special features Supplied with calibration certificate Go (GUT) plug gauge type Category: Gauges / Plug gauges FAQ What does "GUT" mean on the gauge? The designation indicates a Go‑type plug gauge; the Go thread plug gauge M65 x 3.0 should enter the inspected internal thread without binding if the part meets the specified tolerance. Is a calibration certificate included? Yes, the gauge is supplied with a calibration certificate that documents the measured condition at delivery and supports traceability in quality records. Which standard does the gauge conform to? The plug gauge complies with DIN 13 and is produced to the 6H tolerance class for ISO metric fine threads. Can this gauge check left‑hand threads? This specific gauge is a right‑hand thread tool; left‑hand threads require the corresponding left‑hand gauge. For which applications is this gauge intended? The gauge is intended for production inspection and quick acceptance checks of internal M65 × 3 fine threads in machining, assembly and incoming inspection processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x3 Thread Go/No-Go Ring For ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Ensure reproducible inspection of metric fine threads with hardened gauge steel and DIN 13, tolerance 6g; the tool is supplied with a calibration certificate for traceability. Order the Thread ring gauge NO‑GO M65×3.0 directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge NO‑GO M65×3.0 — right‑hand metric ISO fine thread gauge, hardened steel Thread ring gauge NO‑GO M65×3.0 is a right‑hand ring gauge designed to verify external threads to DIN standard for metric fine threads; ideal for production inspection and incoming goods control Hardened gauge steel construction DIN 13 tolerance 6g compliance Right‑hand M65×3.0 thread check Calibration certificate included Consistent pass/fail inspection for metric fine threads A dedicated no‑go ring is the fastest way to detect out‑of‑tolerance external threads during serial production. The hardened gauge steel body resists wear and preserves gauge form over long inspection cycles, so the shop‑floor check remains reproducible. By specifying DIN 13 with the 6g tolerance band the gauge verifies conformity to the ISO metric fine‑thread requirements for M65×3.0, reducing false positives and avoiding rework. The ring’s role is binary and intuitive: a correct external thread must not enter the no‑go ring; any fit signals a reject, enabling immediate process control and corrective action. Robust construction that keeps inspection reliable Designed as a purpose‑built ring gauge, the device’s heat‑treated material and precise internal form provide dimensional stability under frequent handling. The construction in hardened gauge steel minimises wear and dimensional drift, translating into fewer gauge replacements and lower life‑cycle costs. The modest mass and compact form make it practical for workshop use while its solid build withstands the mechanical demands of quality control stations. Calibrated geometry and durable surfaces ensure that each check is a meaningful measurement rather than a rough verification. Traceability and integration with quality systems Supplied with a calibration certificate, the gauge supports documented quality routines and audit trails; the paperwork confirms measured conformity at dispatch and can be placed in the inspection record for traceability. This certificate aids integration into quality management systems and facilitates supplier or customer audits. Where documented evidence of measurement capability is required, the included certificate provides immediate reassurance to production management and quality engineers that the no‑go check has a verifiable reference point. Practical benefits for production and incoming inspection Using a dedicated no‑go ring for M65×3.0 streamlines tactile inspection and shortens cycle times on the shop floor: operators can sort parts by simple fit/no‑fit checks without complex setup. The gauge supports fast decision‑making at the machine or in the receiving bay, improving throughput and reducing bottlenecks. Robust material choice and adherence to the DIN 13, 6g rating mean compatibility with common ISO fine‑thread specifications, so the gauge functions reliably across batches and suppliers. Contact Metav Werkzeuge for expert advice on integrating the calibrated M65×3.0 no‑go ring gauge into your inspection routine; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss availability and delivery from Emmerich. Technical data Article number: M315.865.8 GTIN: 4054469154633 Weight: 1.8 kg Material: Gauge steel, hardened Facts Nominal diameter: 65 mm Pitch: 3.0 mm Standard: DIN 13, 6g Tariff number: 90173000 Special features Right‑hand metric ISO fine thread gauge No‑go (reject) ring function Supplied with calibration certificate Category: Gauges / Ring gauge Brand: Metav IndustryLine FAQ What is the primary purpose of a no‑go ring gauge? A no‑go ring gauge is used to detect external threads that exceed the maximum material condition; the Thread ring gauge NO‑GO M65×3.0 quickly identifies rejects by a simple fit/no‑fit check, enabling immediate sorting on the production line. Does the ring gauge come with calibration documentation? Yes, the gauge is supplied with a calibration certificate that documents the measured form at the time of dispatch and supports traceability for the Thread ring gauge NO‑GO M65×3.0 in quality records. What standard and tolerance does this gauge check against? This ring gauge checks conformity to DIN 13 with a 6g tolerance class for metric fine threads, ensuring compatibility with typical ISO metric thread requirements for M65×3.0. Can this gauge be used for left‑hand threads? No, the supplied gauge is a right‑hand thread ring; left‑hand threads require a specifically produced left‑hand ring gauge rather than the Thread ring gauge NO‑GO M65×3.0. How does the hardened material benefit everyday inspection? The hardened gauge steel reduces wear on the internal form, maintaining dimensional stability over repeated use and helping the Thread ring gauge NO‑GO M65×3.0 to deliver consistent checks with lower replacement frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x4 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of fast pass/fail checks and durable construction to keep inspection lines moving: the hardened gauge steel body and DIN 13, 6H tolerance ensure reproducible detection of out-of-tolerance threads, while delivery with a calibration certificate supports traceability and documentation. Order the gauge directly via Metav Werkzeuge or ask our consultants for application advice. No-go thread plug gauge M65×4.0 — metric ISO fine pitch, right-hand (Metav IndustryLine) The No-go thread plug gauge M65×4.0 by Metav IndustryLine is a right‑hand plug gauge designed for fast, unambiguous verification of metric ISO fine threads in production and inspection environments DIN 13 tolerance 6H Hardened gauge steel body Delivered with calibration certificate Right‑hand metric fine thread M65×4 Rapid pass/fail inspection that prevents rework and downtime A dedicated no‑go plug gauge provides a straightforward binary check: parts that accept the gauge fail the tolerance, parts that do not accept it pass. This simplifies decision making on the shop floor and speeds throughput by removing subjective judgement. The use of a defined DIN 13, 6H tolerance band translates complex thread geometry into a clear inspection step, enabling repeatable checks during high-volume runs and reducing the risk of assembly issues further down the line. Durable design for frequent shop‑floor use Manufactured from hardened gauge steel, the gauge is built for repetitive engagement without rapid wear. The robust material choice preserves the functional dimensions over long service intervals, maintaining accuracy during continuous use. The compact, single‑piece design minimises handling errors and is suited to manual checking stations as well as integration into a parts‑inspection routine for incoming or finished components. Traceable calibration for quality management and documentation Supplied with a calibration certificate, the gauge supports existing quality systems and audit trails by providing documented measurement provenance. Traceability of inspection equipment is essential for supplier quality assurance and for processes that require records of conformity; the included calibration documentation fulfils that need and eases compliance with internal or customer audit requirements. Contact Metav Werkzeuge to request the calibrated Metav IndustryLine no‑go plug gauge M65×4.0 and ensure consistent thread inspection across production and incoming inspection processes Technical Data Article number: M315.665.9 GTIN: 4054469154992 Label: Thread plug gauge AUSSCHUSS M 65 X 4,0 for metric ISO fine thread, right‑hand Standard: DIN 13, 6H Facts Weight: 1.8 kg Size/designation: M65×4 Tariff number: 90173000 ECLASS: 21170228 Special features Material: hardened gauge steel Function: No‑go (reject) plug gauge for metric fine threads Supplied with calibration certificate Category: Gauges / Plug gauges FAQ What does the No‑go designation mean for inspection? The No‑go function means the plug gauge is used to detect threads that exceed the upper tolerance limit; if the No‑go gauge enters the thread, the part is rejected. The Metav IndustryLine No‑go plug gauge M65×4.0 offers a clear pass/fail check for this purpose. Is the gauge traceable for audits and quality records? Yes, the gauge is supplied with a calibration certificate, providing documented traceability suitable for quality management systems and audit requirements for the Metav IndustryLine plug gauge M65×4.0. Which thread standard does the gauge conform to? The gauge is manufactured to DIN 13 with a 6H tolerance class, matching standard metric ISO fine thread specifications for reliable conformity checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x4 Thread Go Ring For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Ensure reliable thread inspection with the combination of hardened gauge steel construction and DIN 13 (6g) conformity; supplied with a traceable calibration certificate for immediate QA use — order the M65 x 4.0 No‑Go thread ring directly via Metav Werkzeuge or consult our specialists for application advice. Thread No‑Go Ring M65 x 4.0 — No‑Go ring gauge for right‑hand metric ISO fine threads (Metav IndustryLine) A Thread No‑Go Ring M65 x 4.0 designed for rapid rejection checks of right‑hand metric ISO fine threads in production and inspection environments Hardened gauge steel construction DIN 13 tolerance class 6g Delivered with calibration certificate Right‑hand M65 x 4.0 No‑Go dimension Faster, unambiguous pass/fail checks on the production line A dedicated No‑Go ring gauge provides a simple, objective decision for threaded parts: a correct thread must not accept the No‑Go member. This design eliminates measurement interpretation and accelerates inline checks, reducing standstill time. Conformity with DIN 13 and tolerance class 6g ensures the gauge aligns with common metric ISO fine-thread specifications, so inspection routines remain consistent with engineering drawings and contractual tolerances. The result is a clear reduction in rework and faster throughput during batch releases. Durable materials for long inspection cycles Manufactured from hardened gauge steel, the component resists wear from repeated use and maintains dimensional stability over many cycles. Hardening increases resistance to abrasion and helps preserve the reference form of the thread profile, which is crucial for repeatable results. Supplied with a calibration certificate, the ring arrives ready for documented quality procedures and traceability; the certificate confirms the gauge state at delivery, supporting quality records without delay. Robust construction therefore lowers lifetime cost by extending service intervals. Simple integration into quality management systems This No‑Go ring is specified for metric ISO fine threads and is instantly usable within established inspection workflows for incoming goods, production control and final inspection. The compact, single‑function instrument removes ambiguity from sampling routines and simplifies operator training. Where formal traceability is required, the included calibration documentation supports batch records and audit trails. For environments that demand efficient pass/fail decisions, the ring enables reproducible outcomes with minimal handling and no specialised measuring equipment. For dependable reject detection and documented inspection, order the thread No‑Go ring through Metav Werkzeuge — the Emmerich-based team is available to advise on suitability and delivery via phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: M315.865.9 GTIN: 4054469155357 Tariff number: 90173000 Weight: 1.8 kg Material: Hardened gauge steel Thread size: M65 x 4.0 Tolerance / standard: DIN 13, 6g Right‑hand thread Supplied with calibration certificate Facts Thread diameter: 65 mm Thread pitch: 4.0 mm Weight: 1.8 kg Tariff code: 90173000 Special features No‑Go (reject) ring gauge function Suitable for metric ISO fine threads Hardened tool steel for wear resistance Delivered with calibration certificate for traceability FAQ What is the purpose of a No‑Go ring gauge? A No‑Go ring gauge is used for quick pass/fail checks on threaded parts; the No‑Go must not fit if the thread is within tolerance — the Thread No‑Go Ring M65 x 4.0 performs this role for right‑hand metric ISO fine threads. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate confirming its measured state at delivery, enabling immediate use in documented quality procedures. Which standard does this thread gauge follow? The ring complies with DIN 13, tolerance class 6g, matching common specifications for metric ISO fine threads. Can this ring be used for left‑hand threads? No, this particular ring is manufactured for right‑hand threads only; left‑hand applications require the corresponding left‑hand gauge. What material is the gauge made from and why does it matter? The ring is made from hardened gauge steel, which ensures dimensional stability and wear resistance for reliable inspection over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x4 Thread Go Ring For Metric ISO Fine Thread Right-Handed With Calibration Certificate, DIN 13 6g - Metav IndustryLine
Take advantage of precise conformity and robust construction: the hardened gauge steel body and conformity to DIN 13, 6g ensure reproducible thread checks and reduced rejection rates in production. Supplied with a calibration certificate, the gauge delivers traceable results and immediate integration into quality procedures. Order via Metav Werkzeuge or consult our specialists for application advice. Go Thread Ring Gauge M65 x 4.0 (right-hand) — Metav IndustryLine, hardened gauge steel, tolerance 6g Go Thread Ring Gauge M65 x 4.0 (right-hand) is a hardened ring gauge designed for inspection of metric ISO fine threads to DIN 13, tolerance grade 6g, suitable for production control and incoming inspection Go ring gauge M65 x 4.0, right-hand Hardened gauge steel construction Manufactured to DIN 13, tolerance 6g Supplied with calibration certificate Reduce rejects with standard-compliant thread inspection A ring gauge manufactured to DIN 13 with tolerance 6g provides a clear, objective verdict on internal thread conformity. The Go variant accepts the maximum acceptable thread form so that non-conforming parts are reliably identified at first check; this simplifies in-line quality checks and supports statistical process control. Using a standardised acceptance limit reduces subjective assessment and shortens inspection time, translating directly into improved process reliability and lower scrap rates. Durable construction for repeatable measurements and long service life The body is produced from hardened gauge steel, chosen for wear resistance and dimensional stability under workshop conditions. This construction keeps the acceptance limit constant across many measurement cycles, maintaining traceability of results and reducing frequent replacement costs. The right-hand Go ring design gives an immediate pass/fail result without additional gauges, and the compact mass aids safe handling during repeated checks while ensuring rigidity at the seating face. Calibration and traceability that support audits and documentation Supplied with a calibration certificate, the gauge enters the metrological chain ready for use in quality systems and audits. The certificate documents the measured reference values and provides traceability for internal records or external inspections. For procurement and quality managers, this reduces administrative lead time: the gauge can be filed in the measurement plan and scheduled for routine recalibration, ensuring ongoing conformity and demonstrable control over thread production. Choose Metav IndustryLine for reliable thread inspection: request the Go thread ring gauge M65 x 4.0 with calibration certificate from Metav Werkzeuge to integrate standard-compliant verification into your production line efficiently Technical data Article number: M315.765.9 GTIN: 4054469155173 ECLASS: 21170214 Customs tariff number: 90173000 Facts Thread designation: M65 x 4.0 Tolerance grade: 6g Weight: 1.8 kg Standard: DIN 13 Special features Material: hardened gauge steel Gauge type: Go (GUT) ring gauge Thread hand: right-hand Supplied with calibration certificate Category: gauges / ring gauges FAQ What thread size and pitch does this gauge check? The Go thread ring gauge checks M65 x 4.0 metric ISO fine threads as specified for the Metav IndustryLine Go gauge (SKU M315.765.9). Is a calibration certificate included with delivery? Yes, the ring gauge is supplied with a calibration certificate, which documents traceability and measured reference values for audit purposes. Which standard does the gauge comply with? The gauge is manufactured to DIN 13 with tolerance grade 6g, suitable for standard production and inspection routines. Can the gauge be used for left-hand threads? This model is manufactured as a right-hand Go ring gauge; equivalent left-hand versions must be selected if left-hand thread inspection is required. What material is the gauge made from and why is that important? The gauge is made from hardened gauge steel, selected for wear resistance and dimensional stability to ensure reproducible results over prolonged use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M65x4 Thread Plug Go Right-Hand For Metric ISO Fine Thread, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Combine robust hardened gauge steel construction with strict DIN 13, 6H conformity and an included calibration certificate for dependable, repeatable thread checks; order the Go plug gauge directly via Metav Werkzeuge or ask our consultants for application advice. Go plug gauge M65 x 4.0 — right‑hand metric ISO fine thread, hardened gauge steel A Go plug gauge M65 x 4.0 designed for rapid acceptance testing of right‑hand metric ISO fine internal threads in production and inspection environments. Hardened gauge steel construction DIN 13, 6H thread tolerance Includes calibration certificate Ensures fast, reliable acceptance testing on the shop floor The primary benefit of this gauge is immediate, objective verification of internal threads. As a Go plug gauge, it confirms that threaded bores meet the dimensional acceptance limits defined by DIN 13, 6H, enabling fast decisions during in‑process inspection. The straightforward pass/fail check removes ambiguity from sampling routines and reduces traceability gaps in batch testing. The thread form M65 x 4.0 is specifically matched to fine metric ISO threads, which simplifies handling of large series where consistent quality is essential. Traceable calibration for documented quality control Delivered with a calibration certificate, the gauge provides documented proof of conformity that integrates with quality management systems and internal audits. Traceable calibration supports reproducible results and helps maintain inspection intervals without guesswork. For procurement and quality managers, the certificate reduces administrative overhead and shortens qualification time for incoming inspection processes. The presence of a formal calibration document is particularly useful where inspection records are scrutinised during supplier evaluations. Durable build suited to routine inspection tasks Constructed from hardened gauge steel, the tool resists wear from repeated engagement with mating threads, extending service life and preserving measurement integrity. The simple mechanical design of a plug gauge means no electronics or batteries are required — inspection is immediate and low‑maintenance. Robust manufacturing and appropriate heat treatment ensure the gauge retains tolerance over repeated cycles, making it a practical choice for both shop‑floor inspectors and dedicated metrology benches. For reliable thread acceptance with Metav IndustryLine quality, contact Metav Werkzeuge for purchasing guidance and technical consultation on the M65 x 4.0 go plug gauge. Technical data Article number: M315.565.9 GTIN: 4054469154817 Manufacturer: Metav IndustryLine Norm: DIN 13, 6H Numbers / Core technical data Thread size: M65 x 4.0 Weight: 1.8 kg Tariff code: 90173000 ECLASS: 21170228 Materials / Special features Material: Gauge steel, hardened Calibration: Supplied with calibration certificate Thread form: Right‑hand metric ISO fine thread (6H) Application: Thread verification (Go plug gauge) FAQ What does this gauge check? The M65 x 4.0 go plug gauge checks whether an internal thread conforms to the acceptance limits of a right‑hand metric ISO fine thread as specified by DIN 13, 6H; it performs a simple go/no‑go validation for fit. Is a calibration certificate supplied with the gauge? Yes, the go plug gauge M65 x 4.0 is supplied with a calibration certificate to document measured conformity for quality records and audit purposes. Which standard does the gauge comply with? The tool is manufactured to match DIN 13, 6H thread tolerances for metric ISO fine threads and is intended for standardised acceptance testing. What material and treatment are used? Manufactured from hardened gauge steel, the gauge is designed for durability and long service life under routine inspection use. Can this gauge be used for production testing of series components? Yes, the M65 x 4.0 plug gauge is optimised for rapid, repeatable acceptance checks in series production and incoming inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x1.5 Thread Go Gauge For Metric ISO Fine Thread, Right-Handed, Hardened Gauge Steel DIN 13 6H, Calibrated - Metav IndustryLine
The combination of a hardened gauge‑steel construction, clear conformity to DIN 13, 6H, and delivery with a calibration certificate provides immediate traceability and dependable reject inspection for metric fine threads; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. No‑go thread plug gauge M68 x 1.5 — right‑hand, hardened gauge steel (Metav IndustryLine) The No‑go thread plug gauge M68 x 1.5 is a right‑hand plug gauge intended for fast, reliable inspection of metric ISO fine internal threads in production and incoming quality control. No‑go plug gauge for M68 x 1.5 Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Supplied with calibration certificate Reduce scrap with reproducible reject checks A dedicated no‑go plug gauge speeds up thread inspection by providing an immediate pass/fail result for internal threads. Specified for M68 x 1.5 metric ISO fine threads and manufactured to the DIN 13, 6H profile, the instrument ensures that parts exceeding the maximum material condition are identified before assembly or plating. This measurable control step reduces rework and avoids hidden defects in bolted assemblies, streamlining quality routines on production lines and in incoming goods inspections. Durable build for repeated use in production environments Constructed from hardened gauge steel, the tool resists wear and maintains the essential profile over prolonged cycles of use. The robust material and careful heat treatment preserve dimensional integrity so that the reject check remains reliable under frequent handling. The compact, single‑piece design is optimised for repeatability and stable seating in the thread, supporting fast cycle checks without the need for additional fixtures. Traceability and inspection-ready delivery The gauge is delivered with a calibration certificate, providing documented traceability of the inspection standard used. That certificate supports internal quality records and external audits, giving confidence that the rejection criterion applied on the shop floor is verifiable. Where a documented chain of measurement is required, the supplied paperwork simplifies incorporation into quality management systems and calibration logs. Practical applications across workshop and production This plug gauge suits quality departments in metalworking, fastener production, and mechanical assembly where metric fine threads are used. Typical applications include initial inspection of turned or cast housings, final checks before surface treatment, and spot checks during series production. As a single‑purpose reject gauge, it complements go gauges in a two‑stage inspection concept and integrates easily into standardised inspection plans. Contact Metav Werkzeuge for procurement details on the Metav IndustryLine M68 x 1.5 no‑go plug gauge (SKU M315.668.6) and to confirm calibration documentation and delivery from Emmerich Technical Data Article number: M315.668.6 GTIN: 4054469152356 Thread: M68 x 1.5 Material: gauge steel, hardened Standard: DIN 13, 6H Weight: 1.8 kg Specifications Diameter: 68 mm Pitch: 1.5 mm Tolerance class: 6H Weight: 1.8 kg HS tariff number: 90173000 Special features No‑go (reject) plug gauge Right‑hand thread Supplied with calibration certificate Category: Gauges / Plug gauges FAQ What is the primary function of this plug gauge? The no‑go plug gauge checks whether an internal metric ISO fine thread exceeds the maximum material condition; the Metav IndustryLine M68 x 1.5 (SKU M315.668.6) is used to reject parts that do not meet the specified thread limits. Does the gauge come with calibration documentation? Yes, the item is supplied with a calibration certificate, which documents the measurement status and traceability for quality records. Which thread standard and tolerance does it follow? The gauge is manufactured to DIN 13 with a 6H tolerance class for metric internal threads and is intended for fine‑pitch series where M68 x 1.5 is specified. What material is the gauge made from and why is that important? Made from hardened gauge steel, the gauge offers longevity and stable dimensions under repeated use, ensuring the reject criterion remains consistent over time. How is a no‑go check interpreted during inspection? If the no‑go plug does not enter the threaded component under the designated light force, the thread passes the reject check; if it does enter, the part is classed as out of tolerance and subject to rejection or rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x1.5 Thread Go Plug Gauge Metric Fine Pitch Right-Hand Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Robust verification performance with hardened gauge steel and DIN 13 compliance ensures consistent production checks; supplied with a traceable calibration certificate, order directly via Metav Werkzeuge or consult our inspection specialists for application advice. Thread Go Plug Gauge M68×1.5 (Go) — Go plug gauge, DIN 13, 6H The Thread Go Plug Gauge M68×1.5 is a hardened limit gauge for fast, reliable verification of right‑hand metric ISO fine threads in production, incoming inspection and quality control. Hardened gauge steel for stable measurements Calibrated delivery incl. calibration certificate Conforms to DIN 13, tolerance class 6H Ensure repeatable thread verification on the shop floor A properly selected Go plug gauge reduces measurement uncertainty and speeds up thread inspection. The M68×1.5 size addresses ISO fine‑thread applications where a tight tolerance band is required. Manufactured from hardened gauge steel, the gauge resists wear and maintains geometry during repetitive use, which translates into fewer false rejects and more consistent assembly acceptance. Conformity to DIN 13, 6H simplifies integration with existing inspection protocols and drawing specifications, ensuring checks are directly comparable across shifts and suppliers. Achieve traceable quality and audit readiness Delivery with a calibration certificate provides documented evidence of conformity at the time of supply and supports traceability for audits. For regulated production lines or supplier incoming inspections, the calibrated status confirms the gauge meets specified dimensions and functional limits. The right‑hand orientation and "Go" function confirm that threads accept an intended fastener without interference; this functional check is faster than full dimensional remeasurement and aligns with lean inspection philosophies, reducing cycle time while preserving product reliability. Built for practical handling and long service life The compact, single‑piece design focuses on robust contact geometry and straightforward use at the bench or on the shop floor. The M68×1.5 gauge serves as a quick go/no‑go check that avoids complex fixtures or lengthy set‑ups. Where frequent verification is required, the wear resistance of hardened gauge steel and the simple go‑gauge principle lower maintenance demands and support continuous throughput. Clear marking of the size and tolerance class enables rapid identification during multi‑gauge inspection routines. Contact Metav Werkzeuge today to secure the Metav IndustryLine M68×1.5 thread Go plug gauge, supplied with a traceable calibration certificate and ready for immediate use in production inspection. Technical data Article number: M315.568.6 GTIN: 4054469152110 Weight: 1.8 kg Thread size: M68×1.5 Standard: DIN 13, 6H Tariff code: 90173000 Facts Type: Go (G) plug gauge Hand: Right‑hand thread Material: Gauge steel, hardened Packaged with: Calibration certificate Special features Designed for metric ISO fine threads Suitable for production and incoming inspection Robust one‑piece gauge for repetitive use Clear size/tolerance marking for rapid identification FAQ What does the Go designation mean for this plug gauge? The Go designation indicates this plug is a functional limit gauge that checks whether a thread meets the minimum material condition: the Metav IndustryLine Thread Go Plug Gauge M68×1.5 (SKU M315.568.6) will enter a conforming internal thread, confirming acceptability without measuring every pitch or diameter. Is the gauge supplied with traceable calibration? Yes, the M68×1.5 gauge is supplied with a calibration certificate that documents the measurement status at delivery, suitable for inclusion in quality records and audit trails. Which standard does the gauge follow and why is that important? The gauge is manufactured to DIN 13, 6H, which defines metric thread tolerances; using a gauge aligned to this norm ensures compatibility with engineering drawings and supplier specifications. Can this gauge be used for both inspection and process control? The robust Go plug design is appropriate for incoming inspection and simple in‑process checks where a quick go/no‑go determination is sufficient; it supports faster throughput compared with full dimensional inspection. How does the material affect long‑term use? Made from hardened gauge steel, the gauge offers increased wear resistance and dimensional stability under repetitive use, which preserves the functional check and reduces replacement frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x1.5 Thread Go/No-Go Ring Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a rugged, standard‑compliant ring gauge that speeds up inspection and reduces rework: the hardened gauge steel construction and DIN 13 (6g) tolerance deliver reliable, repeatable results for metric fine threads. Order the gauge directly via Metav Werkzeuge or contact the consultants for application advice. Thread ring gauge NO‑GO M68 x 1.5 — metric ISO fine thread, right‑hand — Metav IndustryLine A Thread ring gauge NO‑GO M68 x 1.5 designed for rapid verification of external metric ISO fine threads in production and quality control, ensuring clear reject detection on right‑hand threads Hardened gauge steel construction Conforms to DIN 13 (6g) tolerance Includes calibration certificate Designed for M68 x 1.5 metric fine threads Rapid, unambiguous reject detection for production lines The NO‑GO ring is intended for decisive, one‑step verification: when the no‑go side does not fit, the external thread is confirmed as out of tolerance. This straightforward mechanical check converts dimensional theory into a binary result, shortening inspection time and avoiding ambiguous measurements. Using a dedicated ring gauge for the M68 x 1.5 size preserves the traceability of inspections and simplifies operator training, which in turn improves throughput and reduces the risk of costly rework. Durable build with traceable calibration for quality assurance Manufactured from hardened gauge steel, the ring delivers long service life even under frequent use in workshop and shop‑floor environments. Compliance with DIN 13 (6g) ensures the gauge matches established thread standards for metric fine threads, offering a reliable reference for acceptance criteria. The tool is supplied with a calibration certificate, supporting quality documentation and internal audits by providing documented measurement traceability and baseline conformity for incoming or in‑process checks. Practical fit for inspection routines and process control Compact and robust, the ring gauge integrates easily into routine quality checks and go/no‑go stations. The right‑hand orientation aligns with standard screw thread directions, while the gauge’s mass and dimensioning make handling straightforward during rapid sampling. By providing immediate accept/reject feedback, the gauge supports tighter process control and contributes to lower scrap rates and fewer downstream failures, making it a pragmatic investment for production and inspection departments. For procurement or technical guidance on Metav IndustryLine gauges — including this M68 x 1.5 NO‑GO ring gauge — contact Metav Werkzeuge directly at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for the application Technical data Article number: M315.868.6 GTIN: 4054469152837 Weight: 1.8 kg Material: gauge steel, hardened Designation: M68 x 1.5 Core specifications Nominal diameter: 68 mm Thread pitch: 1.5 mm Tolerance class: 6g Tariff number: 90173000 eClass: 21170214 Materials & features Hardened gauge steel For metric ISO fine thread, right‑hand No‑go (reject) ring function Supplied with calibration certificate Standard: DIN 13 FAQ What is the primary purpose of this ring gauge? The ring gauge serves as a NO‑GO control for external metric ISO fine threads; the Thread ring gauge NO‑GO M68 x 1.5 confirms whether a manufactured thread exceeds acceptable limits. How does the calibration certificate support quality records? The supplied calibration certificate documents the gauge’s measurement traceability, enabling the ring (M315.868.6) to be included in audit trails and inspection records for quality management systems. Which standard does the gauge comply with? The gauge is manufactured to match DIN 13 (6g) specifications for metric fine threads, ensuring conformity with common industry acceptance criteria. Is this gauge suitable for continuous shop‑floor use? Yes. Constructed from hardened gauge steel, the NO‑GO ring is designed for repetitive use in production inspection routines and maintains dimensional stability under regular handling. Can this gauge detect handedness errors on threaded parts? The gauge is a right‑hand thread NO‑GO ring; it is intended specifically for right‑handed metric ISO fine threads and will not correctly assess left‑hand threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x1.5 Thread Plug Gauge Metric ISO Fine Right Handed Calibrated, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 tolerance class 6g and an included calibration certificate for reproducible, traceable thread inspection. Order the GO thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. GO thread ring gauge M68 x 1.5 — Metric ISO fine thread, right-hand (Metav IndustryLine) A GO thread ring gauge M68 x 1.5 intended for fast pass/fail verification of metric ISO fine threads in production and quality-control environments. Includes calibration certificate Hardened gauge steel construction DIN 13 — tolerance class 6g Consistent pass/fail inspection that speeds up quality control The GO ring is engineered for reliable pass/fail testing, allowing clear acceptance or rejection of threaded parts without time-consuming measurements. With the M68 x 1.5 pitch and a right-hand thread form, the gauge matches the common metric ISO fine-thread profile, ensuring compatibility with standard components produced under DIN 13. Using a dedicated ring gauge reduces cycle time on the shop floor and minimises subjective interpretation, which directly improves throughput in series inspection. Durable construction for long service life and stable dimensions Manufactured from hardened gauge steel, the ring gauge resists wear and retains its geometry under repeated use. The material choice and heat treatment provide wear resistance that preserves the functional limit dimensions over extended inspection intervals. This stability means fewer replacements and less process variation, a practical advantage for workshops and production lines that require dependable gauges for routine checks. Traceable calibration for quality assurance and documentation The tool is supplied with a calibration certificate, establishing measurement traceability and supporting internal quality records or external audits. The supplied certificate confirms the gauge's conformity at the time of calibration and simplifies documentation for incoming inspection or final approval procedures. For regulated production environments, this traceability helps to demonstrate control of measurement equipment and supports consistent product conformity. Practical handling and shop-floor integration The ring's compact design and clear GO function make it straightforward to integrate into existing inspection stations or portable checking routines. Lightweight and robust, the gauge fits hand inspection workflows and can be used alongside go/no-go plug gauges or calibrated masters to form a complete thread verification set. The simple pass/fail logic reduces operator training time while maintaining repeatable results. For reliable thread inspection from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice or to request delivery: call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M315.768.6 GTIN: 4054469152592 Weight: 1.8 kg Thread size: M68 x 1.5 Standard: DIN 13, 6g Facts Material: hardened gauge steel Thread hand: right-hand Calibration: supplied with calibration certificate Category: thread ring gauge (GO) Special features Suitable for metric ISO fine threads Designed for pass/fail inspection Durable, heat-treated construction FAQ What does the calibration certificate cover for this ring gauge? The calibration certificate confirms that the GO thread ring gauge M68 x 1.5 was inspected and measured against traceable standards at the time of calibration, providing documented conformity for quality records. Can this gauge be used for everyday production checks? Yes, the GO ring gauge from Metav IndustryLine is designed for routine pass/fail verification in production and quality-control workflows, offering quick decisions and consistent results. What does the DIN 13, 6g specification mean for compatibility? DIN 13 with tolerance class 6g indicates the gauge matches common metric ISO fine-thread tolerances, ensuring the ring gauge is compatible with parts manufactured to that specification. How should the ring gauge be maintained to preserve accuracy? Keep the gauge clean, store it in a dry place and avoid impacts; regular recalibration is recommended to maintain traceability and measurement confidence for the GO thread ring gauge M68 x 1.5. Is this gauge suitable for left-hand threads? No, this specific gauge is manufactured as a right-hand thread gauge; left-hand thread inspection requires a corresponding left-hand ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x2 Thread Go Ring Gauge Metric ISO Fine Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Reliable go/no-go control for M68 × 2 threads combines hardened gauge steel, DIN 13 (6g) tolerance and a supplied calibration certificate to support traceable inspection — Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed Thread ring gauge GUT M68 x 2.0 — metric ISO fine thread, right-hand (Metav IndustryLine) The thread ring gauge GUT M68 x 2.0 is a right-hand metric ISO fine-thread control gauge designed for production inspection and final acceptance testing in mechanical workshops and quality-control labs M68 x 2 fine-pitch thread gauge DIN 13 tolerance class 6g Hardened gauge steel construction Supplied with calibration certificate Ensure repeatable go/no-go inspection for fine threads A purpose-made go/no-go thread ring gauge offers a fast and reliable pass/fail check for external threads. Manufactured to DIN 13 with tolerance 6g, this control ring enables immediate conformity decisions on M68 × 2 threads without the need for complex measurement setups. The hard-wearing construction reduces wear-related drift, so throughput remains consistent and scrap rates fall — a practical solution to streamline routine inspection and maintain production efficiency. Traceability and documented quality for audits Supplied with a calibration certificate, the gauge supports documented measurement traceability required during audits and incoming inspection. The enclosed certificate records the acceptance status at handover and can be archived with quality records, helping to meet traceability demands in supplier chains and internal quality systems. This documented assurance simplifies audit preparation and reinforces objective evidence for batch release or inspection logging. Robust design for workshop reliability and longevity Made from hardened gauge steel, the control ring is engineered for repeated use under workshop conditions. The material choice secures dimensional stability and resistance to mechanical damage, while the right-hand design matches standard thread production. The compact, single-piece construction minimises handling errors and supports quick inspection cycles — delivering reliable service life even in high-volume applications and reducing total cost of ownership through fewer replacements. Practical benefits for procurement and QA teams Adopting a standardised thread ring like this one brings operational clarity: inspection can be delegated safely to trained operators, measuring throughput increases, and quality gates become concise and reproducible. The combination of a fine-pitch M68 × 2 specification, DIN-compliant tolerance, and a calibration certificate makes this gauge a targeted tool for suppliers, maintenance departments and inspection benches that require dependable, auditable results. For traceable thread inspection and prompt supply, contact Metav Werkzeuge to secure the Metav IndustryLine thread ring gauge with calibration certificate and professional advice from Emmerich Technical data SKU: M315.768.7 GTIN: 4054469153667 Size: M68 x 2.0 Standard: DIN 13, 6g Dimensions & identifiers Weight: 1.8 kg Tariff code: 90173000 eCl@ss: 21170214 Materials & features Material: hardened gauge steel Right-hand metric ISO fine thread Supplied with calibration certificate FAQ What size and thread type does this gauge check? The thread ring gauge GUT M68 x 2.0 checks external metric ISO fine threads with a pitch of 2.0 mm and a nominal diameter of M68. Is the gauge traceable for quality assurance purposes? Yes — the Metav IndustryLine GUT M68 x 2.0 is supplied with a calibration certificate that documents its inspection status for traceability. Which tolerance class is the ring manufactured to? The control ring conforms to DIN 13 with tolerance class 6g, suitable for standard production acceptance. What material is the gauge made from and how does that help? Constructed from hardened gauge steel, the ring offers dimensional stability and wear resistance, supporting reproducible inspection results over extended use. Can this gauge be used straight from delivery for inspection work? Yes — the supplied calibration certificate confirms the delivered acceptance; the gauge is ready for immediate use in inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x2 Thread Plug Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction, conformity to DIN 13 (6H) and a supplied calibration certificate to secure reproducible thread inspection results; order the gauge directly via Metav Werkzeuge or contact the consultants for specification advice. Thread plug gauge GUT M68 x 2.0, right‑hand — calibrated, DIN 13 (6H) The Thread plug gauge GUT M68 x 2.0 is a right‑hand plug gauge for verification of metric ISO fine threads, designed for production testing and quality assurance in metalworking environments Calibrated with certificate included Conforms to DIN 13, tolerance 6H Hardened gauge steel construction Right‑hand metric M68 x 2.0 Reliable inspection that keeps production moving Manufactured as a Go gauge, this instrument provides a fast, unambiguous check that internal threads meet the specified limits. The combination of hardened gauge steel and the DIN 13 tolerance class ensures mechanical stability during repeated use, reducing wear‑related drift and helping to keep scrap rates low. For production control, a Go plug gives an immediate pass/fail result that integrates smoothly into machinist routines, improving throughput while maintaining traceability of inspection steps. Why DIN 13 (6H) and material choice matter Compliance with DIN 13 (6H) defines the thread form and tolerance band for metric ISO fine threads; this gauge is made to that standard so results are directly comparable to engineering drawings and acceptance criteria. The gauge steel body is hardened to preserve the reference profile over many cycles, which translates into stable measurement performance and predictable maintenance intervals. Supplied calibration certificate documents the instrument's conformity at delivery and supports internal quality records without delay. Practical handling and workflow benefits The plug gauge is sized M68 x 2.0, suitable for inspection of finer‑pitch metric assemblies where correct flank engagement is critical. As a right‑hand gauge with clear Go function, it is simple to use at the workbench or in incoming inspection: insert, feel the fit, and record the pass. The robust construction allows for straightforward cleaning and storage with minimal special handling, while the calibration documentation facilitates audit readiness and fast acceptance into quality systems. For traceable thread inspection and dependable shop‑floor performance choose the Metav IndustryLine calibrated thread plug gauge — contact Metav Werkzeuge in Emmerich for expert guidance and prompt supply: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany; +49 2822 7131930; info@metav-werkzeuge.com Technical data Article number: M315.568.7 GTIN: 4054469153070 Customs tariff number: 90173000 Numbers / Core technical data Mass / Size: M68 x 2.0 Weight: 1.8 kg Standard: DIN 13, 6H Special features / Materials Material: gauge steel, hardened Type: Go (thread plug gauge) Direction: right‑hand thread Calibration: supplied with calibration certificate FAQ What thread size and pitch does this gauge check? The thread plug gauge checks an M68 x 2.0 metric fine thread as specified for the GUT M68 x 2.0 Go gauge. Is a calibration certificate included with the gauge? Yes, the instrument is supplied with a calibration certificate confirming the condition at delivery. What tolerance class is represented by the gauge? The gauge conforms to DIN 13 with tolerance class 6H, matching standard ISO metric fine‑thread requirements. Which material is used for the gauge and why? The gauge is made from hardened gauge steel to preserve the reference profile and ensure long service life under frequent use. Can this gauge be used for acceptance testing of critical threaded components? Yes, the calibrated plug gauge is intended for production and incoming inspection to verify conformity with metric ISO fine‑thread specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x2 Thread Plug Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise rejection control with a hardened gauge‑steel no‑go plug for M68 x 2.0 threads; compliance with DIN 13 (6H) and delivery with a calibration certificate ensure reliable pass/fail decisions on production lines. Order directly via Metav Werkzeuge or contact the consultants for application advice. Thread no‑go plug M68 x 2.0 — right‑hand metric ISO fine thread, hardened gauge steel by Metav IndustryLine Thread no‑go plug M68 x 2.0 is a dedicated reject gauge for rapid verification of metric ISO fine threads in production and inspection environments, designed to check that internal threads exceed permitted tolerances. Hardened gauge steel construction DIN 13 (6H) tolerance compliance Supplied with calibration certificate Right‑hand metric ISO fine thread High‑speed, reliable rejection control for production The no‑go plug is engineered for straightforward, repeatable checks that prevent out‑of‑tolerance components entering assembly. Made from hardened gauge steel, the gauge resists wear and maintains its verification geometry over many cycles, reducing rework and downtime. Conforming to DIN 13 (6H) gives a clear normative basis for acceptance decisions; the defined tolerance class helps standardise inspection routines across shifts and suppliers. Designed for use at bench‑level or inline quality stations, the component supports efficient quality assurance workflows and shortens inspection times without sacrificing measurement certainty. Clear technical conformity and traceable calibration Supplied with a calibration certificate, this reject gauge supports documented quality processes and traceability. The certificate confirms the gauge’s conformity at the time of delivery and is suitable for inclusion in inspection records and quality audits. The tool is tailored to the M68 x 2.0 metric fine thread profile and is a right‑hand version, ensuring direct interchangeability with threaded parts manufactured to the same standard. Using a dedicated no‑go plug reduces subjective interpretation during checks: a mechanical fit signals an out‑of‑tolerance condition immediately, enabling rapid corrective action and clear pass/fail documentation. Robust handling and workshop integration The robust design and familiar plug‑gauge format simplify daily handling: operators can perform quick go/no‑go checks without additional fixtures or complex measurement devices. The compact form factor facilitates storage near production lines and the hardened construction minimises maintenance needs. For workshop managers seeking to harmonise inspection procedures, this gauge provides a low‑complexity, high‑reliability tool that complements existing metrology equipment and supports consistent quality standards across production batches. For a dependable no‑go solution from Metav IndustryLine and to request the calibration certificate or application guidance, contact Metav Werkzeuge today for tailored advice and supply options. Technical data SKU: M315.668.7 GTIN: 4054469153285 Category: Lehren / Messstifte Customs tariff number: 90173000 Facts Thread size: M68 x 2.0 Thread pitch: 2.0 mm Weight: 1.8 kg Standard: DIN 13, 6H Special features Material: hardened gauge steel Right‑hand metric ISO fine thread No‑go (reject) plug gauge Supplied with calibration certificate FAQ What is the purpose of this no‑go plug? The thread no‑go plug M68 x 2.0 is used to detect internal threads that exceed allowable tolerances; a fit indicates a rejected (out‑of‑tolerance) condition for the inspected component. Does the gauge conform to recognised standards? Yes, the plug gauge is manufactured to the DIN 13 (6H) specification and intended for use with metric ISO fine threads at the M68 x 2.0 size. Is a calibration certificate included with delivery? The product is supplied with a calibration certificate confirming the gauge’s conformity at delivery, enabling traceability in quality documentation. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel; this material maintains dimensional stability and resists wear, ensuring consistent inspection results over time. Can this tool be used on left‑hand threads? This specific item is a right‑hand thread plug gauge M68 x 2.0; left‑hand thread applications require the corresponding left‑hand gauge. How should a fit with the no‑go plug be interpreted in production? If the no‑go plug enters the internal thread, the part exceeds permitted tolerances and should be rejected or reworked according to the quality procedure. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x2 Thread Ring Gauge Metric ISO Fine Right-Hand, Rejected With Calibration Certificate, DIN 13 6g - Metav IndustryLine
Take advantage of a hardened gauge-steel construction, precise M68×2.0 thread form and a supplied calibration certificate for traceable thread checks; order this inspection item directly via Metav Werkzeuge or contact our consultants for application advice. Thread gauge ring AUSSCHUSS M68×2.0 – Thread gauge ring, DIN 13, 6g (Metav IndustryLine) A Thread gauge ring AUSSCHUSS M68×2.0 designed for right‑hand metric ISO fine threads; suitable for workshop verification and process checks under DIN 13 tolerance class 6g. Hardened gauge steel construction For metric ISO fine threads M68×2, 6g Supplied with calibration certificate Right‑hand thread, DIN 13 compliance Reliable verification for metric fine threads The ring serves as a direct Go/No‑Go reference for metric ISO fine threads with a nominal size of M68×2.0 and tolerance class 6g, enabling rapid acceptance decisions on incoming parts or during in‑process inspections. Because the gauge embodies the thread form defined by DIN 13, measurements are comparable across suppliers and production stages, which supports consistent quality assurance and reduces ambiguity in pass/fail outcomes. Durable design for repeated use and low wear Manufactured from hardened gauge steel, the component resists wear and maintains its form under regular handling, which preserves measurement integrity over many cycles. The robust material choice minimises profile change and the need for early replacement, yielding lower lifetime costs for routine inspection tools and a stable reference for repetitive thread checks in the workshop environment. Calibrated delivery for traceability and documentation This inspection item is supplied with a calibration certificate, providing documented traceability for quality records and audit requirements. The included certificate supports internal quality systems and facilitates integration into inspection plans, making it straightforward to demonstrate that thread gauges used in control processes have been examined and documented prior to use. Condition note and recommended applications The label indicates AUSSCHUSS status, which denotes that the item is offered as an inspection/reprocessing lot; suitability depends on the intended use. Such items are particularly useful for non‑critical fixture checks, training, jigs, or as a spare reference where absolute production release tolerances are not required. For critical final acceptance tasks, consider selecting a standard new gauge or request further condition details from Metav IndustryLine. For precise-thread verification or to discuss whether this Metav IndustryLine inspection item fits the application, contact Metav Werkzeuge in Emmerich for delivery and documentation details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.868.7 GTIN: 4054469153872 Thread: M68×2.0 Material: Lehrenstahl, gehärtet Standard: DIN 13, 6g Weight: 1.8 kg Tariff code: 90173000 Facts Nominal size: M68×2.0 Tolerance class: 6g Right‑hand thread: yes Special features Supplied with calibration certificate Condition: AUSSCHUSS (inspection/rework lot) Application: Metric ISO fine threads, verification and process checks FAQ What thread size and tolerance class does this gauge cover? The Thread gauge ring AUSSCHUSS M68×2.0 covers a nominal thread form of M68×2.0 and conforms to tolerance class 6g as specified in DIN 13. Is a calibration certificate included with the gauge? Yes, the Thread gauge ring AUSSCHUSS M68×2.0 is supplied with a calibration certificate to provide traceability for inspection records. What does the AUSSCHUSS designation mean for usability? AUSSCHUSS indicates the item is offered as an inspection/rework lot; the Thread gauge ring AUSSCHUSS M68×2.0 is therefore recommended for non‑critical checks, training, jigs or secondary verification rather than final release where new‑item status is required. Which material is the gauge made from? The Thread gauge ring AUSSCHUSS M68×2.0 is made from hardened gauge steel, chosen for wear resistance and dimensional stability during repeated use. Does the gauge comply with a recognised standard? Yes, the Thread gauge ring AUSSCHUSS M68×2.0 references DIN 13 and the specified 6g tolerance class for metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com