Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M68x3 Thread Gauge Go, Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a certified verification tool that combines DIN 13 compliance, hardened gauge steel construction and simple inspection logic for reliable thread control. Order directly via Metav Werkzeuge or consult our specialists for application advice and rapid delivery. Thread plug gauge GO M68 x 3.0 — GO plug gauge for metric ISO fine thread, right-hand (Metav IndustryLine) the Thread plug gauge GO M68 x 3.0 is a precision GO plug gauge designed to verify metric ISO fine threads in production and inspection environments; intended for right-hand threads and conformity checks Calibrated with certificate included For metric ISO fine thread M68 x 3.0 Hardened gauge steel for long life Reliable verification for production control The GO plug gauge form provides an unambiguous pass criterion for internal threads, enabling fast, repeatable checks on mating components during incoming inspection or in-process control. Manufactured to DIN 13 with tolerance class 6H, this gauge confirms that the major and pitch diameters are within specified limits for a valid fit. Using a dedicated GO check shortens inspection time compared with dimensional measurement methods, supporting higher throughput and consistent acceptance criteria. Robust construction for everyday workshop use Made from hardened gauge steel, the gauge resists wear in continuous use and keeps its functional dimensions longer than untreated mates. The compact, solid design and the right-hand thread form make it suitable for installation checks in machining, assembly and maintenance lines where repeatability matters. With a mass of 1.8 kg, the unit has sufficient heft for stable handling while remaining practical for bench use and transport between workstations. Traceable calibration that supports quality systems Delivered with a calibration certificate, the gauge arrives ready for immediate use in traceable quality workflows; the certificate documents verification against recognised standards and supports internal audits and supplier quality records. As a standard calibrated tool, it integrates into existing inspection routines and reduces lead time to first-use. The clear conformity result from the GO check fits well with control plans, reducing subjective interpretation and strengthening documented acceptance decisions. Request application guidance and certified delivery from Metav Werkzeuge for Metav IndustryLine gauges to ensure the right fit for production and quality assurance Technical data Article number: M315.568.8 GTIN: 4054469154077 Tariff number: 90173000 Weight: 1.8 kg Material: hardened gauge steel Standard: DIN 13, 6H Thread size: M68 x 3.0 Orientation: right-hand Numbers / Core technical data Thread pitch: 3.0 mm Mass: 1.8 kg GTIN numeric: 4054469154077 Tariff numeric: 90173000 Special features / Designs GO checking gauge for internal threads Calibrated delivery with certificate Category: plug gauge (gauge for internal threads) Suitable for metric ISO fine threads Durable, hardened gauge steel construction FAQ What does the GO designation mean for this gauge? The GO designation indicates the plug gauge will pass when the internal thread meets the minimum material and dimensional requirements; the GO plug gauge M68 x 3.0 verifies that the thread is within the acceptable limit for assembly. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate confirming documented verification, enabling immediate use in traceable inspection routines. Which standard and tolerance class does the gauge comply with? Manufactured to DIN 13 with tolerance class 6H, the gauge is intended for metric ISO fine thread checks. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, providing wear resistance and dimensional stability for frequent use in production and inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x3 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13 6g With Calibration Certificate - Metav IndustryLine
Take advantage of precise pass/fail inspection with DIN‑compliant tolerance, hardened gauge‑steel construction and an included calibration certificate for immediate traceability; order directly via Metav Werkzeuge or consult our specialists for project support. Go thread ring gauge M68 x 3.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) A Go ring gauge M68 x 3.0 that verifies metric ISO fine threads in production and inspection settings, designed as a right‑hand pass gauge for reliable go/no‑go checks Includes calibration certificate For metric ISO fine threads M68×3.0 Right‑hand Go ring gauge, DIN 13, 6g Hardened gauge steel construction Reliable pass/fail verification to reduce rework A dedicated Go ring gauge provides an immediate, unambiguous indication of whether an external thread meets specified limits. The M68 x 3.0 size, manufactured to DIN 13, 6g, offers compatibility with common metric ISO fine‑threaded components used in assemblies and fittings. By using a dedicated pass gauge for first‑article inspection and routine sampling, shops gain a fast, low‑effort method to prevent nonconforming parts from advancing in the production process, improving throughput and lowering rework rates. Robust materials and documented traceability for long service life Manufactured from hardened gauge steel, the ring gauge resists wear during repeated contact checks and maintains dimensional stability under normal workshop conditions. Delivery includes a calibration certificate, ensuring traceability of the measurement status at the time of supply and supporting quality documentation. The combination of hardened material and documented calibration reduces uncertainty in acceptance decisions and prolongs the interval between necessary verifications, contributing directly to consistent inspection outcomes. Simple integration into workshop quality routines The right‑hand Go ring gauge is immediately usable at the inspection station or on the shopfloor as part of a control plan. Its single‑purpose design speeds routine checks and complements vision or tactile inspection systems where a physical go/no‑go result is required. For buyers seeking vendor assurance, Metav IndustryLine provides a dependable supply route and technical consultation to match the gauge to existing quality procedures, making it straightforward to adopt as a repeatable element of a measurement regime. For a calibrated Metav IndustryLine Go ring gauge, request the M315.768.8 via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability for specific inspection tasks Technical data Article number: M315.768.8 GTIN: 4054469154459 Net weight: 1.8 kg Tariff number: 90173000 Core measurements Thread size: M68 x 3.0 Thread type: Metric ISO fine thread Tolerance class: 6g (DIN 13) Hand: Right‑hand Special features Material: gauge steel, hardened Calibration: calibration certificate included Gauge type: Go (pass) Label: Go ring gauge for metric ISO fine thread FAQ What does the calibration certificate cover? The supplied calibration certificate documents the inspection and acceptance criteria at the time of manufacture and accompanies the Go ring gauge M68 x 3.0 to provide traceability for quality records. Is this gauge suitable for production line checks? Yes, the Go thread ring gauge M68 x 3.0 is designed for quick pass/fail checks in production and inspection routines and conforms to DIN 13, 6g. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel; this material choice improves wear resistance and preserves dimensional stability during frequent use. Can this ring gauge verify left‑hand threads? This specific item is a right‑hand Go ring gauge; left‑hand thread checks require the corresponding left‑hand gauge. How is the gauge identified for ordering or stock? Order or reference using the article number M315.768.8 and the GTIN 4054469154459 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x3 Thread Plug Gauge Go/No‑Go Right‑Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened, standard‑compliant gauge that provides unmistakable rejection of out‑of‑tolerance threads, while supplying traceability via an included calibration certificate; order the gauge directly via Metav Werkzeuge or contact our consultants for application advice. Thread plug gauge NO‑GO M68 x 3.0 — Metric ISO fine thread, right‑hand, DIN 13 (6H) — Metav IndustryLine The Thread plug gauge NO‑GO M68 x 3.0 is a hardened inspection gauge for verifying metric ISO fine internal threads (right‑hand), designed for use in production control and final inspection. Hardened gauge steel construction DIN 13 (6H) tolerance class Supplied with calibration certificate Clear rejection when tolerance must be enforced The NO‑GO plug gauge serves as a definitive go/no‑go control for internal threads: if the NO‑GO entry is accepted, the thread falls outside the permitted limits defined by DIN 13 (6H) and must be rejected. This straightforward mechanical check removes ambiguity from pass/fail decisions and speeds inspection routines on the shopfloor. By relying on a hard gauge rather than subjective measurement chains, process stability is improved and non‑conforming parts are identified at the earliest stage. Durable construction for consistent repeatability Manufactured from hardened gauge steel, the gauge resists wear and preserves its functional limits over repeated cycles, which supports reproducible inspections and reduces the frequency of replacement. The right‑hand configuration and thread form match metric ISO fine profiles for the M68 × 3.0 size, providing a robust contact geometry that resists deformation. A stable, physical comparator such as this is an efficient addition to in‑line gauging stations and manual quality benches where repeatability and low maintenance are priorities. Traceable calibration for quality assurance The tool is supplied with a calibration certificate, ensuring traceability of the inspection limit back to a recognised measurement event. This supports internal quality procedures and audits by documenting that the gauge was checked prior to delivery. Where recordable calibration is required for incoming tooling, the enclosed certificate enables immediate integration into inspection schedules without delay. Practical benefits for production and QA teams Using a dedicated NO‑GO plug gauge reduces measurement time compared with full profile inspection and simplifies operator training: the physical pass/fail principle is intuitive and limits interpretation errors. The compact, single‑purpose design helps maintain bench space and allows fast sampling across batches, which in turn helps maintain throughput while upholding component integrity. For routine monitoring of thread quality in machining or assembly, such a gauge is a cost‑effective tool to protect downstream processes from rejected parts. Choose Metav IndustryLine plug gauges for clear thread control — contact Metav Werkzeuge for delivery and technical guidance from Emmerich, ensuring the right gauge reaches the production line without delay. Technical data Article number: M315.668.8 GTIN: 4054469154268 Name: Thread plug gauge NO‑GO M68 x 3.0 Material: Hardened gauge steel Standard: DIN 13 (6H) Right‑hand thread Weight: 1.8 kg Tariff number: 90173000 Numbers / Core technical data Thread diameter: M68 Thread pitch: 3.0 mm Tolerance class: 6H Weight: 1.8 kg Design / Special features NO‑GO plug gauge (reject gauge) Metric ISO fine thread, right‑hand Supplied with calibration certificate Hardened gauge steel construction Category: Thread gauges / Gauging tools FAQ What does NO‑GO mean for this plug gauge? The NO‑GO indication for the Thread plug gauge NO‑GO M68 x 3.0 means the gauge is designed to detect threads that exceed the maximum material condition; acceptance of the NO‑GO denotes a rejectable thread according to its DIN 13 (6H) limits. Is a calibration certificate included with the gauge? Yes, a calibration certificate is supplied with the Metav IndustryLine NO‑GO plug gauge, providing traceability and documentation for quality records. Can this gauge be used for left‑hand threads? This specific gauge is manufactured as a right‑hand thread plug gauge and is intended for inspection of right‑hand metric ISO fine threads sized M68 × 3.0. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, which provides wear resistance and dimensional stability so the limit condition remains reliable over repeated use. How does this gauge relate to production quality control? The plug gauge offers a quick, mechanical pass/fail check that accelerates sampling and reduces interpretation errors in the quality workflow; the NO‑GO function helps prevent out‑of‑tolerance threads from progressing further in production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x3 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand, Reject With Calibration Certificate - Metav IndustryLine
Take advantage of fast pass/fail control with a hardened no‑go ring that matches DIN 13 (6g) tolerances and is supplied with a calibration certificate; order the gauge directly via Metav Werkzeuge or consult our advisors for precise delivery and documentation. Thread Ring Gauge M68 x 3.0 — No‑Go, Metric ISO Fine Thread (right‑hand) The Thread Ring Gauge M68 x 3.0 is a hardened no‑go ring for right‑hand metric ISO fine threads, intended for rapid in‑process and incoming‑goods inspection in industrial environments. Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g Supplied with a calibration certificate No‑go function for immediate pass/fail control Rapid pass/fail inspection for reliable production flow A dedicated no‑go ring such as this M68 x 3.0 variant turns thread assessment into an immediate, objective decision. The instrument is designed to verify that external threads exceed the maximum allowable material limit: if the ring does not pass, the part is rejected. This direct function reduces subjective judgement and accelerates quality gates on the shop floor, ensuring defective items are identified before downstream processing. Conformity with DIN 13 and 6g tolerance class provides a recognisable standard for procurement and documentation in production control. Durable, hardened construction for long service life Manufactured from hardened gauge steel, the ring offers dimensional stability and wear resistance that preserve gauge integrity under regular use. The hardened material minimizes profile degradation, so measurement uncertainty remains low over many cycles. For workshop logistics, a compact, robust gauge like this reduces downtime for replacements and supports repeatable checks on batches and prototypes. The right‑hand thread geometry and solid construction make the instrument suitable for routine verification of metric ISO fine threads where reproducible results are required. Traceable calibration for audit‑ready inspection records The product is supplied complete with a calibration certificate, enabling traceability in quality systems and simplifying audit preparation. Calibration documentation confirms the ring’s conformity at delivery and supports integration into inspection plans and measurement records. As a Metav IndustryLine item, the gauge benefits from a controlled supply chain: Metav’s European quality filter and stocked distribution mean documentation and provenance are kept transparent and consistent across orders. For assured thread inspection use the Metav IndustryLine calibrated no‑go ring gauge — contact Metav Werkzeuge in Emmerich for order and delivery arrangements or for tailored advice on integrating the gauge into inspection routines. Technical Data Article number: M315.868.8 GTIN: 4054469154640 Label: Thread ring gauge M68 x 3.0, no‑go, metric ISO fine thread, right‑hand Manufacturer: Metav IndustryLine Facts Weight: 1.8 kg Size/designation: M68 x 3.0 Standard: DIN 13 Tolerance class: 6g Tariff number: 90173000 Special features No‑go (Ausschuss) function for immediate reject decision Supplied with calibration certificate Material: gauge steel, hardened Right‑hand metric ISO fine thread application Category: gauges / thread gauges FAQ What is the primary purpose of a no‑go ring gauge? A no‑go ring gauge provides a quick pass/fail check: the Thread Ring Gauge M68 x 3.0 verifies that external threads do not exceed the maximum material condition specified by the standard. Is the gauge delivered calibrated? Yes, the ring is supplied with a calibration certificate confirming its measurement status at delivery. Which thread standard and tolerance does the gauge match? The instrument conforms to DIN 13 and is manufactured to tolerance class 6g for metric ISO fine threads. Can this gauge be used for left‑hand threads? This specific model is configured for right‑hand threads; left‑hand versions require a different ring geometry. What material is the gauge made from and why does that matter? The ring is made from hardened gauge steel, chosen for dimensional stability and wear resistance to maintain repeatable inspection over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x4 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and compliance with DIN 13 (6g) to secure fast, reliable go/no-go checks on metric fine threads; the tool is supplied calibrated with a certificate for immediate use and traceability. Order the gauge directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Go thread ring gauge M68 x 4.0 (DIN 13, 6g) – right-hand | Metav IndustryLine The Go thread ring gauge M68 x 4.0 is a hardened ring gauge designed for inspection of metric ISO fine threads in a right-hand configuration, ideal for rapid go/no-go acceptance testing in production and incoming inspection. Hardened gauge steel construction Calibrated with certificate included Conforms to DIN 13 tolerance 6g M68 x 4.0 right-hand metric fine thread Reliable in-process verification for consistent production quality A Go ring gauge provides an immediate, unambiguous check of internal thread form: a go fit confirms that the threaded part meets the essential dimensional requirements defined for M68 x 4.0. Built to DIN 13 with tolerance class 6g, this gauge reduces reliance on time‑consuming measurement equipment for routine checks and supports faster cycle times on the shop floor. The hardened construction maintains dimensional stability under frequent handling, translating into fewer stoppages and reduced scrap rates. Traceable calibration to support quality systems and audits Delivery with a calibration certificate ensures traceability and documents the gauge's conformity at the time of issue; this certificate supports internal quality records and audit trails. For companies operating a documented inspection regime, the certificate provides the necessary evidence that the gauge was verified prior to being put into service. The simple go/no‑go principle also helps standardise inspection steps across different operators, improving reproducibility and reducing operator-induced variance. Durable materials for long service life and low maintenance Manufactured from hardened gauge steel, the ring resists wear and preserves the functional gauge limits over extended use. This wear resistance means longer intervals between re‑calibration or replacement, lowering the total cost of ownership for the measuring tool. The right-hand orientation and metric fine‑thread geometry are engineered for repeatable engagement, ensuring the gauge remains a reliable quick‑check instrument throughout routine production cycles. Suited to workshop and inspection environments This gauge is tailored for machine shops, quality departments and assembly lines dealing with metric ISO fine threads in medium to heavy production. The pass/fail format supports efficient incoming inspection and in‑process checks alike, aiding rapid decision making and reducing throughput delays. Backed by Metav IndustryLine’s distribution and quality filter from Emmerich, the product pairs practical shop‑floor usability with the supply security expected by industrial buyers. For ordering, technical clarification or to discuss how the M68 x 4.0 go ring gauge fits existing inspection routines, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a consultant Technical data Article number: M315.768.9 GTIN: 4054469155180 Tariff number: 90173000 Facts Thread size: M68 x 4.0 Tolerance class: 6g Weight: 1.8 kg eCl@ss: 21170214 Special features Material: gauge steel, hardened Standard: DIN 13 Type: Go (GUT) thread ring gauge, right-hand Delivery: calibration certificate included FAQ What does a Go thread ring gauge check? A Go thread ring gauge checks whether an internal thread conforms to the maximum material limits; the supplied Go gauge for M68 x 4.0 confirms that the part allows the specified mating thread to engage. Is a calibration certificate included with this gauge? Yes, the M68 x 4.0 ring gauge is supplied with a calibration certificate, documenting the verification of the gauge at delivery. Which tolerance class does this gauge correspond to? This ring gauge is manufactured to DIN 13 with tolerance class 6g, suitable for metric ISO fine threads requiring that tolerance band. Can this gauge be used on left-hand threads? No, the supplied version is for right-hand metric threads. For left-hand applications, a corresponding left-hand gauge must be specified. Which industries typically use this type of ring gauge? Machine shops, component manufacturers, and quality inspection labs that work with metric ISO fine threads commonly use Go ring gauges like this one for fast, repeatable acceptance checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x4 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H With Calibration Certificate - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction, DIN 13 6H conformity and an included calibration certificate to maintain reliable thread inspections; purchase through Metav Werkzeuge or consult the specialists for suitability and local availability. Thread plug gauge, reject M68 x 4.0 – right‑hand metric ISO fine thread, DIN 13 6H (Metav IndustryLine) The thread plug gauge M68 x 4.0 provides a rugged verification tool for metric ISO fine internal threads in right‑hand form, intended for workshop inspection and gauge rooms M68 x 4.0 metric fine thread gauge Hardened gauge steel construction DIN 13, tolerance 6H compliance Supplied with calibration certificate Reliable pass/fail checking for production control The plug gauge offers a straightforward method for verifying internal metric threads to the DIN 13 6H tolerance class, enabling fast go/no‑go assessments at incoming inspection or on the shop floor. Constructed from hardened gauge steel, the gauge resists wear during repeated engagement and preserves the functional limits defined by the standard. Using a dedicated thread verification tool reduces measurement time compared with optical or CMM checks and supports consistent quality decisions in a production environment. Built for repeatability and workshop durability A hardened, single‑piece construction gives high mechanical stability and helps maintain the defined thread boundary under frequent use. The right‑hand M68 x 4.0 geometry matches the corresponding internal threads used in heavy‑duty assemblies and fixtures; the robust material choice lowers the risk of profile distortion so that the gauge remains a dependable reference during routine sampling. Where quick verification and traceable limits are required, this design balances durability with ease of handling. Traceable calibration for audit readiness Delivered with a calibration certificate, the gauge supports traceability in quality systems and supply‑chain documentation. The paperwork confirms the measured condition at the time of delivery and aids in integrating the gauge into existing inspection intervals. For companies that require documented verification of inspection equipment, the included certificate simplifies archive management and audit responses while indicating that the instrument left the factory in a validated state. Practical considerations and status note This item is marked as reject and is offered with full calibration documentation; the designation should be considered when deciding on intended use. Where a verified factory‑new gauge is mandatory for final assembly or critical measurement tasks, please consult the calibration records supplied and the Metav Werkzeuge advisors to confirm acceptability. For non‑critical checks, training, jigs or secondary inspection stations, the instrument remains a cost‑efficient, calibrated alternative. Choose the Metav IndustryLine M68 x 4.0 thread plug gauge via Metav Werkzeuge for calibrated, standard‑compliant thread checks and contact Metav Werkzeuge in Emmerich for purchase guidance and delivery options Technical data SKU: M315.668.9 GTIN: 4054469155005 Material: hardened gauge steel Size: M68 x 4.0 Standard: DIN 13, tolerance 6H Weight: 1.8 kg Tariff number: 90173000 Core data Thread designation: M68 x 4.0 Handedness: right‑hand Tolerance class: 6H Weight (kg): 1.8 Special features Supplied with calibration certificate Marked as reject item Suitable for metric ISO fine threads Robust, single‑piece construction FAQ What is the primary use of this plug gauge? The thread plug gauge M68 x 4.0 is used for quick go/no‑go checks of internal metric ISO fine threads in the tolerance class DIN 13 6H during incoming inspection and routine production sampling. Does the gauge come calibrated? Yes, the gauge is supplied with a calibration certificate confirming its measured condition at delivery; the documentation facilitates integration into formal inspection programmes. Is this gauge suitable for critical final‑assembly checks? The item is marked as a reject article; review of the supplied calibration certificate and consultation with Metav Werkzeuge is recommended before using it for critical final‑assembly verifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x4 Thread Go/No-Go Ring Gauge Metric ISO Fine Thread Right-Hand Calibrated, DIN 13 6g - Metav IndustryLine
Take advantage of robust hardened gauge steel, DIN 13 tolerancing and an included calibration certificate for reproducible thread inspection results; order the gauge directly via Metav Werkzeuge or ask our consultants for application advice. No‑Go Thread Ring Gauge M68 x 4.0 — right‑hand, DIN 13, hardened gauge steel (Metav IndustryLine) A No‑Go Thread Ring Gauge M68 x 4.0 designed for fast verification of metric ISO fine threads in production and quality control environments No‑Go ring gauge M68 x 4.0 Hardened gauge steel construction DIN 13 compliance, tolerance 6g Supplied with calibration certificate Assured rejection control for inline inspections A dedicated no‑go ring is the definitive tool when the priority is to detect oversize threads reliably. Manufactured from hardened gauge steel, this ring provides stable mating geometry that resists wear and preserves the set limit over repeated use. The part conforms to DIN 13, 6g, which ensures compatibility with metric ISO fine-thread specifications and allows simple integration into established inspection routines. Supplied with a calibration certificate, the gauge supports traceability and documented quality control without additional on-site calibration work. Practical use and process benefits in the workshop Designed as a right‑hand thread verifier for M68 x 4.0 pitches, the ring gauge serves as a fast go/no‑go decision tool on the shop floor and at final inspection stations. Its mass and robust construction give a positive feel when checking assemblies, reducing handling error and improving repeatability during high-volume checks. Using a dedicated no‑go ring reduces rework by identifying non-conforming threads immediately, which helps to maintain throughput and lower waste in the production chain. Long‑term reliability and standards conformity Hardened material selection and precision finishing extend service life and maintain limit accuracy between calibrations. Compliance with the DIN standard simplifies documentation and supplier communication, while the included calibration certificate documents the gauge’s condition at delivery for quality records. For operations that require consistent rejection criteria and clear audit trails, this no‑go ring gauge is a pragmatic, low‑risk component of any thread inspection set-up. For assured thread inspection and traceable calibration, order the Metav IndustryLine No‑Go Thread Ring Gauge via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.868.9 GTIN: 4054469155364 Label: Gewinde‑Lehrring AUSSCHUSS M 68 X 4,0 für metrisches ISO‑Feingewinde, rechts Facts Thread size: M68 x 4.0 Weight: 1.8 kg Standard: DIN 13, 6g eClass: 21170214 Tariff number: 90173000 Special features Material: gauge steel, hardened Right‑hand metric ISO fine thread Marked as no‑go (reject) gauge Supplied with calibration certificate FAQ What does "no‑go" mean in thread inspection? A no‑go ring checks whether a thread is oversize; if the No‑Go Thread Ring Gauge M68 x 4.0 does not fit, the thread is within tolerance — if it enters, the thread must be rejected. Is the gauge delivered ready for use with traceable documentation? Yes, the Metav IndustryLine ring is supplied with a calibration certificate confirming inspection at delivery and suitable for inclusion in quality records. Can this ring be used for non‑metric or left‑hand threads? This specific gauge is manufactured for metric ISO fine right‑hand threads at M68 x 4.0; different standards or left‑hand forms require the corresponding dedicated gauge. How often should the ring gauge be recalibrated? Recalibration intervals depend on usage frequency and the criticality of the process; the supplied certificate documents the initial state and should be referenced when defining the inspection schedule. Is the material suitable for continued shop‑floor use? Yes, the hardened gauge steel construction is chosen for wear resistance and long service life under normal inspection conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M68x4 Thread Plug Gauge, Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise thread acceptance control combined with robust, hardened construction and traceable calibration. The GO plug gauge for M68 x 4.0 metric fine threads ensures fast in‑line verification and repeatable results; order via Metav Werkzeuge or contact our consultants for specification support. Thread plug gauge GUT M68 x 4.0 — GO gauge for metric ISO fine thread, right‑hand (Metav IndustryLine) A Thread plug gauge GUT M68 x 4.0 for rapid verification of right‑hand metric ISO fine threads to DIN 13, 6H, intended for workshop and production quality control GO gauge for M68 x 4.0 metric fine thread Hardened gauge steel construction Manufactured to DIN 13, 6H standard Supplied with calibration certificate Fast, reliable acceptance testing for fine threads The primary benefit of this plug gauge is immediate, unambiguous acceptance testing for threaded components. As a GO plug gauge sized M68 x 4.0, it confirms that internal threads meet the nominal profile and the tolerance class DIN 13, 6H; a simple pass/no‑pass check replaces lengthy measurement routines and speeds up production control. For high‑volume checks on batches or quick spot checks at the inspection bench, the plug gauge reduces cycle time while maintaining objective criteria for conformity. Robust materials for long service life and stable results Constructed from hardened gauge steel, the gauge resists wear and maintains form under repeated use. The material choice and heat treatment deliver high surface hardness and dimensional stability, which in turn preserves the gauge profile and ensures repeatable checks over time. For maintenance this means fewer replacements and stable process capability indices, translating into lower total cost of ownership for the inspection tooling. Traceable calibration supports quality systems Supplied with a calibration certificate, the gauge arrives ready for integration into traceable quality procedures and inspection records. The calibration document provides verifiable evidence of conformity at the time of delivery, making the plug gauge suitable for incoming inspection, final inspection and first‑article checks. This traceability supports audit requirements and helps maintain consistent quality across production batches. Practical use and typical applications Designed as a right‑hand plug gauge, this tool is ideal for verifying internal metric fine threads in components such as housings, flanges and precision fittings commonly encountered in mechanical engineering and assembly work. The simple tactile check suits shop‑floor environments where rapid decisions are required; where more detailed measurement is necessary, the plug gauge serves as the first‑line control to identify parts that need further examination. Contact Metav Werkzeuge for delivery times and technical advice on integrating this Metav IndustryLine plug gauge into inspection routines Technical data Article number: M315.568.9 GTIN: 4054469154824 Weight: 1.8 kg Material: hardened gauge steel Size: M68 x 4.0 Facts Thread size: M68 x 4.0 Tolerance standard: DIN 13, 6H Tariff number: 90173000 Classification: 21170228 Special features GO (GUT) plug gauge for right‑hand metric ISO fine threads Supplied with calibration certificate Suitable for workshop and production quality control FAQ What does the GO marking mean for this gauge? The GO designation indicates that the plug gauge verifies acceptable threads; the Thread plug gauge GUT M68 x 4.0 confirms whether internal threads meet the nominal profile and tolerance class. Is the gauge suitable for right‑hand or left‑hand threads? This plug gauge is manufactured for right‑hand metric ISO fine threads and is intended to check corresponding internal threads only. Does the product come with calibration documentation? Yes, the gauge is supplied with a calibration certificate, enabling traceability and immediate use within quality systems. To which standard is the gauge manufactured? Manufacture and tolerances comply with DIN 13, 6H, the recognised standard for metric fine thread gauges. Can the gauge be used in production for fast pass/fail checks? Absolutely; the plug gauge is designed for quick, tactile acceptance testing at the inspection bench or in‑line sampling during production to accelerate quality decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6x0.35 Thread Go Ring Gauge, Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of DIN 13 conformity, hardened gauge steel construction and the compact M6 x 0.35 size for fast, repeatable thread verification on the shop floor. Order the gauge directly via Metav Werkzeuge or consult the sales team for application advice. Thread ring gauge M6 x 0.35 'Go' — hardened gauge steel, right-hand (Metav IndustryLine) A Thread ring gauge M6 x 0.35 'Go' designed for rapid verification of metric ISO fine internal threads in production and quality control Hardened gauge steel construction DIN 13 standard, tolerance 6g Right-hand metric ISO fine thread Compact size for workshop use Faster acceptance checks through standardised limits The go gauge provides an immediate, unambiguous pass criterion for internal threads, reducing inspection cycles and machine downtime. Manufactured to DIN 13 with a 6g tolerance, the ring allows visual and tactile verification without lengthy measurement setups. Using a dedicated ring for the M6 x 0.35 fine thread speeds up repetitive checks and supports lean production methods by simplifying go / no-go decisions at the point of assembly. Durable design for continuous shop-floor use Constructed from hardened gauge steel, the ring is engineered to resist wear under frequent handling. The choice of hardened material preserves thread form and dimensional integrity over many inspection cycles, which reduces replacement frequency and maintains reliable pass criteria. The right-hand configuration and metric ISO profile make the component suitable for many common fastening systems in mechanical and metalworking environments. Seamless fit with existing inspection workflows The compact ring format integrates easily into established inspection jigs and bench setups. Marking and identifiers such as GTIN and the internal SKU ensure traceability in inventory and quality records, while the clear designation as a go gauge removes ambiguity in routine procedures. The ring is suitable for rapid inline sampling as well as final acceptance testing, supporting consistent quality documentation and traceable results. What the specifications mean in practical terms The M6 x 0.35 designation describes the nominal thread diameter and the fine pitch, while 6g specifies the tolerance class for internal threads according to ISO/DIN conventions. A go ring should enter a correctly made internal thread without force; it confirms that the threaded component meets minimum material removal and form requirements. Using a calibrated go gauge as a simple physical standard translates measurement theory into an efficient workshop control that is easy to instruct and replicate. Contact Metav Werkzeuge to discuss how the Metav IndustryLine M6 go ring can be integrated into your inspection routine and to secure the correct gauge for consistent thread verification Technical data Article number: M315.106.1 SKU: M315.106.1 GTIN: 4054469123806 Core specifications Thread: M6 x 0.35 Standard: DIN 13 Tolerance class: 6g Tariff number: 90173000 Special features and materials Material: Gauge steel, hardened Function: Go ring for pass verification of internal threads Thread direction: Right-hand Brand: Metav IndustryLine FAQ What is the primary use of this ring gauge? The Thread ring gauge M6 x 0.35 'Go' is intended for quick acceptance checks of metric ISO fine internal threads, providing a simple pass criterion in production and quality inspection (SKU M315.106.1). What does the tolerance class 6g indicate? The 6g classification defines the permissible limit deviations for the internal thread form and size according to DIN/ISO rules; it ensures compatibility with corresponding external threads manufactured to the same system. Is the gauge suitable for frequent shop-floor use? Yes. The gauge is made from hardened gauge steel to withstand repeated handling and to keep the thread form stable over many inspection cycles. Does the ring check for handedness of the thread? The gauge is specified as a right-hand metric ISO fine thread instrument and is matched to standard right-hand internal threads in production parts. How is the gauge identified for inventory and traceability? Identification is supported by the GTIN 4054469123806 and the article number M315.106.1 for unambiguous tracking in quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6x0.5 Thread Ring Gauge, Good, DIN 13 6g, Right-Handed, Hardened Gauge Steel - Metav IndustryLine
Take advantage of fast, repeatable checks with the M6 x 0.5 go ring gauge, combining DIN 13 conformity, tolerance class 6g and hardened gauge steel for long service life; order directly via Metav Werkzeuge or contact our consultants for application advice. Thread ring gauge M6 x 0.5 — DIN 13, 6g (Metav IndustryLine) The Thread ring gauge M6 x 0.5 is a precision go gauge for right‑hand metric ISO fine threads, designed for production inspection and routine quality control DIN 13 compliant, tolerance class 6g Hardened gauge steel for wear resistance Precision M6 x 0.5 metric fine thread Right‑hand go ring gauge (good) Precision engineered for repeatable thread inspection This ring gauge is engineered to deliver consistent go/no‑go verification for fine metric threads. The combination of DIN 13 standardisation and the 6g tolerance class ensures compatibility with common ISO metric assembly requirements, making the gauge suitable for acceptance tests and in‑process controls. By using a dedicated go ring, inspectors obtain a quick binary check that reduces measuring time and simplifies documentation: a part that passes the ring requires no further thread form measurement for that criterion, freeing up metrology resources for critical dimensions. The nominal M6 x 0.5 designation denotes the basic thread size and pitch; the ring verifies the functional fit of mating fasteners to established industrial limits. Robust construction that withstands shopfloor use Manufactured from hardened gauge steel, the tool resists abrasive wear and maintains its form under frequent use, which lowers replacement intervals and supports reliable sampling plans. The hardened material ensures the thread flanks retain their intended geometry, so the gauge preserves its conformity to DIN 13 over time when handled correctly. The compact, lightweight design facilitates fast manual checks at the workstation while offering sufficient stiffness to avoid deformation during engagement. Regular maintenance—cleaning and dry storage—maximises service life and keeps repeatability high in both small batch production and continuous manufacturing environments. Simple integration into quality routines and documentation The ring gauge supports straightforward process control: use it as part of first‑article inspections, batch acceptance or incoming goods checks to confirm that external threads meet metric ISO fine‑thread requirements. Its clear pass/fail nature simplifies training for shopfloor staff and accelerates decision making during production stoppages. Traceable identification (SKU and GTIN in technical data) helps maintain inventory records and audit trails. For assemblies where thread engagement and interchangeability are critical, this gauge provides a practical, low‑effort assurance step that complements dimensional measuring equipment and avoids unnecessary rework. For guaranteed thread inspection capability, contact Metav Werkzeuge to source this Metav IndustryLine ring gauge and discuss delivery or technical matching to specific components via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.106.2 GTIN: 4054469123813 Weight: 0.05 kg Material: hardened gauge steel Standard: DIN 13, 6g Thread: M6 x 0.5, right‑hand Category: Gauges / Lehren HS code: 90173000 Facts Thread nominal diameter: M6 Thread pitch: 0.5 mm Weight (nominal): 0.05 kg ECLASS: 21170214 Special features Go ring gauge ('gut') for functional inspection Intended for metric ISO fine threads Hardened gauge steel for wear resistance Conforms to DIN 13, tolerance class 6g FAQ What thread size and pitch does this gauge check? The ring checks M6 x 0.5 threads; it is specified for metric fine‑pitch ISO threads and verifies functional fit. Is this a go or a no‑go gauge? This item is supplied as a go ring gauge (marked 'gut') for right‑hand metric ISO threads to confirm acceptable external thread form. Which standard and tolerance class apply to the gauge? The gauge conforms to DIN 13 and is manufactured to tolerance class 6g for compatibility with common production requirements. What material is used and how does that benefit inspection? Made from hardened gauge steel, the ring provides high wear resistance and long service life under regular shopfloor checking. How is the gauge used in routine quality control? The ring is used for quick go/no‑go verification during incoming inspection, first‑article checks and in‑process sampling to ensure thread interchangeability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6x0.75 Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Handed, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of the combination of DIN 13 6H conformity, hardened gauge steel construction and the compact M6×0.75 size for reliable, repeatable thread checks; order the gauge directly via Metav Werkzeuge or consult our technical team for application advice. M315.006.3 — Limit plug gauge M6×0.75, metric ISO fine thread, right‑hand A compact limit plug gauge designed to verify metric ISO fine internal threads (M6×0.75) quickly and reliably in workshop and production environments. Metric ISO M6×0.75 right‑hand thread Hardened gauge steel for high wear resistance Manufactured to DIN 13 tolerance class 6H Compact 0.03 kg body for easy handling Consistent thread assessment for production control The limit plug gauge provides a straightforward, objective method to verify internal threads against the DIN 13 standard and tolerance class 6H. By design this plug confirms the presence and basic conformity of the internal thread profile, enabling fast pass/fail decisions on the shop floor and reducing rework. The compact M6×0.75 size suits small components typical in mechanical assemblies, fastening applications and precision sub‑assemblies. Using a gauge avoids subjective interpretation and supports documented quality procedures. Durable construction that supports frequent use Manufactured from hardened gauge steel, the probe is built to withstand repeated engagement without rapid wear, helping to maintain gauging integrity over time. The hardened material and precise machining ensure the reference surfaces remain true, which is essential for consistent results in routine inspections. The low mass of roughly 0.03 kg makes the tool easy to handle and manoeuvre into small bores, while the robust material choice provides stability under normal workshop conditions. Practical integration into inspection routines This plug gauge is intended for immediate use in standard quality workflows and complements visual and dimensional inspection processes. As a simple limit device it enables rapid checks during incoming goods inspection, assembly and final inspection steps. Traceability is supported by the clear article identification (M315.006.3) and GTIN, enabling record keeping and stock management. For operations that require documented calibration, specific calibration services can be arranged to match internal QA cycles. Ensure reproducible thread quality with the Metav IndustryLine limit plug gauge — contact Metav Werkzeuge in Emmerich for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.006.3 GTIN: 4054469122151 Tariff number: 90173000 Weight: 0.03 kg Facts Thread size: M6 × 0.75 Thread direction: right‑hand Tolerance class: 6H Standard: DIN 13 Special features Material: gauge steel, hardened Type: limit plug gauge for internal threads Category: gauges / limit gauges Application: verification of metric ISO fine threads FAQ What does this gauge check and how is it used? The M315.006.3 limit plug gauge checks the conformity of internal M6×0.75 metric ISO fine threads; the gauge is inserted to confirm a go/no‑go condition in a simple pass/fail inspection. Is the gauge suitable for high‑volume shop‑floor use? Yes. The hardened gauge steel and compact form factor make this plug gauge appropriate for repeated use in production inspection and incoming goods checks. Which standard does the gauge comply with? The device is manufactured to DIN 13 and corresponds to the 6H tolerance class for metric internal threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6x1 Limit Thread Plug Gauge Right-Hand ISO Metric Thread DIN 13 6H, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a durable, standards‑compliant gauge for rapid thread checks: this hardened gauge plug combines DIN 13 / 6H conformity with a compact M6 × 1.0 right‑hand profile for reliable in‑process inspection. Order the limit thread gauge plug directly via Metav Werkzeuge or ask our consultants if needed. Limit thread gauge plug M6 × 1.0 mm — right‑hand, DIN 13 / 6H (Metav IndustryLine) The Limit thread gauge plug M6 × 1.0 mm is a precision go/no‑go thread gauge designed for fast verification of internal metric ISO threads in production and quality control. Hardened gauge steel construction Complies with DIN 13 – tolerance 6H Right‑hand metric M6 × 1.0 thread profile Lightweight 0.03 kg for easy handling Rapid, unambiguous thread inspection on the shop floor A plain go/no‑go concept saves time without sacrificing certainty: the plug gauge gives an immediate pass/fail verdict for internal threads, eliminating measurement interpretation in routine checks. The M6 × 1.0 right‑hand profile matches the metric ISO thread form, while DIN 13 and the 6H tolerance class ensure compatibility with standard tapped holes and nuts. For traceable batch control, the compact design enables quick checks at the machine or at the inspection bench and supports stable process decisions. Built to last – material and standards that reduce downtime Made from hardened gauge steel, the gauge plug resists wear and maintains profile fidelity over repeated trials, extending service intervals and lowering replacement frequency. The hardened construction provides consistent contact geometry, which reduces the risk of false rejects due to gauge deformation. The small mass aids safe handling and reduces operator fatigue during frequent use while the standard conformity supports a predictable acceptance criterion in quality documentation. Integrates into established quality workflows with minimal training Implementation requires no specialist instrumentation: the plug is inserted into the internal thread to check conformity, making it ideal for incoming inspection, first article checks and in‑process audits. Clear acceptance boundaries, based on the go/no‑go principle and the DIN 13 / 6H specification, simplify written procedures and operator instructions. The design is particularly suitable for series production where fast throughput and reproducible checks are decisive for maintaining takt time and avoiding costly rework. For robust thread inspection using Metav IndustryLine’s hardened limit gauge plug, contact Metav Werkzeuge for product details and procurement advice — supply is managed from Emmerich with direct technical support available. Technical data Article number: M315.006 GTIN: 4054469122120 Manufacturer: Metav IndustryLine Facts Thread size: M6 × 1.0 mm Weight: 0.03 kg Tariff number: 90173000 eClass: 21170235 Special features Material: hardened gauge steel Thread standard: DIN 13 Tolerance class: 6H Right‑hand metric thread Product type: limit thread gauge plug FAQ What is the primary purpose of this plug gauge? The limit thread gauge plug is used for quick go/no‑go verification of internal metric ISO threads to confirm conformity with the M6 × 1.0 profile and DIN 13 tolerance class. Which materials and environments is the gauge suitable for? Constructed from hardened gauge steel, the gauge plug is intended for standard workshop and production environments where robust mechanical contact checks are required. How is conformity documented when using this gauge? Use the plug gauge as part of standard inspection records: a go result confirms compliance with the M6 × 1.0 / DIN 13 / 6H specification, which can be recorded in batch or lot inspection reports. Can the SKU M315.006 be referenced for reordering and inventory? Yes, reorder using the article number M315.006; the SKU identifies the Metav IndustryLine limit thread gauge plug for procurement and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6×0.35 Thread Limit Go Plug Gauge Right-Hand Metric ISO Fine Thread DIN 13, 6H, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of DIN 13 conformity, hardened gauge steel, and compact Go/No‑Go inspection capability for reliable thread verification in production. Order the limit thread plug gauge via Metav Werkzeuge or consult our specialists if advice on application is required. Limit thread plug gauge M6 x 0.35 (right-hand) — hardened gauge steel, DIN 13 (6H) by Metav IndustryLine A limit thread plug gauge M6 x 0.35 (right-hand) for straightforward Go/No‑Go inspection of metric ISO fine threads in production control and workshop quality checks. Hardened gauge steel construction Designed for M6 x 0.35 ISO fine thread Conforms to DIN 13 tolerance 6H Faster, standards-based verification for threaded parts The plug gauge offers an efficient, standards-driven method to confirm thread acceptability at the point of manufacture. By providing a clear Go/No‑Go assessment to DIN 13 with the 6H tolerance class, the gauge reduces decision time during inspection and lowers the risk of incorrectly accepted or rejected parts. The simple pass/fail approach is especially useful where throughput and repeatability matter, enabling reliable checks without elaborate measuring setups. Robust build for consistent performance under routine use Constructed from hardened gauge steel, the tool resists wear and preserves dimensional integrity through repeated cycles. The material selection and heat treatment provide high wear resistance, so results remain stable over many inspections and recalibration intervals are extended. For workshop environments where gauges are handled frequently, this durability translates into lower lifetime maintenance and consistent measurement outcomes. Compact handling that fits production workflows The right‑hand, metric fine‑thread format makes this gauge convenient for bench‑level control and inline checks. Its compact profile supports swift positioning and rapid assessment, which helps to keep assembly lines moving and reduces inspection bottlenecks. Integrating the gauge into existing quality routines requires no specialised fixtures, so familiar inspection steps become faster and more predictable. Traceability and supplier confidence for quality assurance Supplied under the Metav IndustryLine umbrella, the gauge benefits from Metav’s quality filter for the European market. This connection supports traceability from order to delivery and aligns the tool with the retailer’s broad range of precision instruments. Relying on established standards and a trusted supplier helps maintain auditability in production records and supports consistent compliance across batches. Discuss application details with Metav Werkzeuge to ensure the Metav IndustryLine limit thread plug gauge suits the specific production requirement; call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice on specification and deployment Technical Data Article number: M315.006.1 GTIN: 4054469122137 Thread size: M6 x 0.35 mm Material: hardened gauge steel Standard: DIN 13, 6H Facts ECLASS: 21170235 Customs tariff number: 90173000 Condition: good Special features Right‑hand thread orientation For metric ISO fine threads Go/No‑Go inspection functionality FAQ What thread type does this gauge check? The limit thread plug gauge checks metric ISO fine threads of size M6 x 0.35 mm and is intended for right‑hand threads. Which standard and tolerance does the gauge follow? The gauge is manufactured to DIN 13 with the 6H tolerance class for consistent verification against standard thread specifications. What is the gauge made from and why does that matter? Made from hardened gauge steel, the instrument offers improved wear resistance and dimensional stability, ensuring repeated Go/No‑Go checks remain reliable. Is the tool suitable for use in a production inspection routine? Yes; the compact design and clear Go/No‑Go functionality make it suitable for rapid checks in production control and workshop quality assurance (SKU M315.006.1). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M6×0.5 Limit Thread Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of a hardened gauge-steel construction together with conformity to DIN 13, tolerance 6H for reproducible pass/fail checks; the compact 0.03 kg design speeds handling in repetitive inspection tasks. Order directly via Metav Werkzeuge or request advice from our consultants for integration into shop-floor control routines. Limit thread plug gauge M6 x 0.5 — right-hand, metric ISO fine thread (Metav IndustryLine) A Limit thread plug gauge M6 x 0.5 intended for rapid go/no-go checks of metric ISO fine threads in production and inspection environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Metric fine thread M6 x 0.5 right-hand Rapid, reliable pass/fail inspection for threaded parts A compact limit plug gauge provides an immediate go/no-go result, reducing inspection time and eliminating interpretation variance from manual measurement chains. Made from hardened gauge steel, the gauge resists wear under frequent use and keeps the verification point stable over many cycles, which conserves calibration intervals and minimises downtime. Designed for metric ISO fine threads, the tool supports fast sorting during assembly or incoming inspection and helps maintain a consistent production flow by catching out-of-spec parts before they move to the next operation. Traceability and specification compliance that supports quality systems Compliance with DIN 13, tolerance 6H ensures the gauge matches recognised thread standards so that measurement results align with established acceptance criteria. The compact mass of 0.03 kg makes the device easy to handle and reduces operator fatigue during repetitive checks, while the clear article and GTIN data facilitate traceable inventory control. Such features simplify documentation in quality records and audits and integrate smoothly with existing quality-management procedures where standardised acceptance gauges are required. Practical workshop benefit from a trusted precision partner Selecting a dedicated limit thread plug gauge from a specialist range supports efficient shop-floor inspection without over-specifying equipment. The right-hand M6 x 0.5 variant is a common requirement across small assemblies, tooling and maintenance tasks, offering a pragmatic balance between accuracy and cost-effectiveness. Metav’s role as a precision partner means the product is supplied ready for use with clear identification for procurement and logistic handling, allowing teams to focus on production rather than instrument management. Contact Metav Werkzeuge for expert guidance and to secure a hardened M6 limit thread plug gauge compliant with DIN 13, 6H Technical data Article number: M315.006.2 GTIN: 4054469122144 Manufacturer: Metav IndustryLine Material: hardened gauge steel Thread: M6 x 0.5 right-hand Standard: DIN 13, 6H Weight: 0.03 kg Facts Thread size: M6 x 0.5 Tolerance class: 6H Mass: 0.03 kg Tariff number: 90173000 GTIN: 4054469122144 Special features Limit (go/no-go) thread plug gauge For metric ISO fine threads Right-hand thread Hardened gauge steel construction SKU: M315.006.2 Categories: gauge pins, gauges FAQ What is the intended use of this limit thread plug gauge? The limit thread plug gauge M6 x 0.5 is designed for go/no-go inspection of metric ISO fine threads to quickly verify whether a threaded bore meets the DIN 13, 6H acceptance criteria. Is the gauge suitable for frequent shop-floor checks? Yes, the hardened gauge-steel construction of the M6 limit gauge is intended for repetitive use and offers wear resistance appropriate for routine inspection tasks. Which standard does this gauge conform to? This plug gauge is manufactured to conform with DIN 13 and the tolerance class 6H, aligning with common metric ISO fine-thread specifications. How is the gauge identified for inventory and traceability? Identification is provided via the article number M315.006.2 and GTIN 4054469122144, supporting traceable procurement and quality records. Can this gauge replace dimensional measurement for threads in quality documentation? For pass/fail acceptance, the limit plug gauge offers a reliable go/no-go verdict; for full dimensional analysis, complementary measurement methods may be required depending on documentation needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M7 x 0.75 Thread Go Gauge Right-Hand Hardened Plug Gauge DIN 13 6g - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, exact DIN 13 tolerance and compact handling for consistent reject control in production. Order the gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M7 x 0.75 mm (No-Go) — hardened gauge steel, DIN 13 | Metav IndustryLine The Thread Ring Gauge M7 x 0.75 mm (No-Go) is a precision inspection tool for detecting oversized external metric ISO fine threads in production and workshop environments Hardened gauge steel construction DIN 13 tolerance class 6g For M7 x 0.75 mm metric fine threads Right-hand No-Go thread ring gauge Ensures reliable rejection of out-of-tolerance external threads A dedicated No-Go ring gauge provides a clear, unambiguous check during final inspection: the component must not accept the ring if it meets specifications. Manufactured to DIN 13 with 6g tolerance, this ring gauge is intended for M7 x 0.75 mm metric fine threads (right-hand). The result is a fast, binary pass/fail indication that reduces subjective judgement and shortens inspection time while keeping quality decisions reproducible. Built for reproducible measurements and long service life Constructed from hardened gauge steel, the ring gauge resists wear and maintains thread form over repeated use, supporting consistent measurement outcomes. The compact design and light mass (0.03 kg) make handling straightforward on the shop floor and reduce operator fatigue during routine checks. Compliance with established standards delivers measurable traceability and integrates directly into standard quality-control routines. Practical benefits for production and quality control Using a purpose-made No-Go ring gauge in the inspection process prevents oversized threaded parts from progressing to assembly, lowering scrap and rework rates. The simple functional principle complements statistical quality measures and supports efficient line-side inspection. For workshops and manufacturers producing or verifying fine threads, this ring gauge offers dependable control and clear documentation of routine checks. For traceable thread control, choose the Metav IndustryLine No-Go ring gauge and contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M315.207.3 GTIN: 4054469125510 Thread size: M7 x 0.75 mm Type: No-Go thread ring gauge (right-hand) Standard: DIN 13, 6g Material: Gauge steel, hardened Mass: 0.03 kg Tariff number: 90173000 Numbers / Core technical data Thread pitch: 0.75 mm Tolerance class: 6g Weight: 0.03 kg Special features For metric ISO fine threads Right-hand configuration Compact, shop-floor suitable Intended for reject/No-Go inspection FAQ What does "No-Go" mean for this ring gauge? A No-Go ring gauge is used to detect oversized external threads; the correct part must not accept the ring. If the ring screws on, the component is out of tolerance. Which thread specification does this gauge check? This ring gauge checks M7 x 0.75 mm metric ISO fine threads in the 6g tolerance per DIN 13 and is supplied as a right-hand No-Go gauge. What material and durability characteristics does the gauge have? The gauge is made from hardened gauge steel, designed for wear resistance and long service life in routine inspection. How is the gauge used in a production inspection routine? Fit the No-Go ring to the external thread; any component that accepts the ring must be rejected or reworked. The method provides a quick pass/fail check for line-side quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M7 x 1 mm Go Thread Ring Gauge Metric ISO Right-Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge steel construction and strict DIN 13 (6g) tolerancing for reliable go/no‑go assessment of metric threads; the M7 x 1 mm Go ring delivers repeatable verification in production and inspection routines. Order the gauge directly via Metav Werkzeuge or ask the consultants for application advice if needed. M315.107 Thread Ring Gauge M7 x 1 mm — Go ring, DIN 13, hardened gauge steel A M315.107 thread ring gauge for right‑hand metric ISO threads, designed to verify conformity of M7 x 1 mm cores in workshop and production environments. Hardened gauge steel for durable verification Conforms to DIN 13 tolerance class 6g Go ring for M7 x 1 mm metric ISO threads Compact, lightweight design for easy handling Consistent dimensional control for fast production checks A ring gauge provides a rapid, unequivocal pass/fail decision for threaded parts; this ring is manufactured to DIN 13 and tolerance 6g, ensuring compatibility with common metric ISO thread specifications. The hardened gauge steel body maintains form under repetitive use, which preserves accuracy and reduces the need for frequent replacement. Using a dedicated Go gauge simplifies inspection sequences and speeds up throughput, because acceptance is confirmed mechanically without reliance on visual comparison or complex measurement setups. Robust construction that reduces downtime and maintenance The hardened material and precise machining of the ring produce stable seating on mating threads, lowering the risk of surface wear that can alter results. The compact, lightweight format makes handling straightforward on the shop floor and in gauge racks, while the ring’s finish protects against incidental corrosion during normal use. Fewer rework cycles and longer service intervals translate into tangible efficiency gains in quality control routines, since one durable gauge replaces multiple temporary solutions and keeps inspection points operative. Simple integration into quality procedures and traceability As a standardised inspection tool, the ring gauge supports documented acceptance criteria and helps enforce process control at incoming inspection, in‑process checks and final verification. The clear Go/no‑Go result reduces operator interpretation time and enables consistent decisions across shifts. For traceability, the ring can be recorded against inspection plans and inventory; its compact nature also makes it suitable for carrying to assembly stations for spot checks. The combination of mechanical immediacy and standard conformity supports reliable quality gates within production sequences — a practical tool for routine metrology. Contact Metav Werkzeuge in Emmerich for tailored advice on using the M315.107 ring gauge within existing inspection plans or to discuss calibration and inventory needs Technical Data Article number: M315.107 GTIN: 4054469123837 Weight: 0.06 kg Material: gauge steel, hardened Standard: DIN 13, 6g Thread: M7 x 1 mm, right‑hand Facts Nominal size: M7 x 1 mm Gauge type: Go ring gauge Country tariff code: 90173000 SKU: M315.107 Special features Material: gauge steel, hardened Thread standard: DIN 13, tolerance 6g Right‑hand metric ISO thread verification Category: Thread gauges / Go ring FAQ What type of thread does this ring gauge check? The M315.107 ring gauge checks right‑hand metric ISO threads with a nominal size of M7 x 1 mm, providing a mechanical go decision for conformity. Is the gauge suitable for production spot checks? Yes. The Go ring gauge is designed for quick, repeatable verification in production and inspection areas where fast pass/fail assessment is required. What material is the ring made from and why does it matter? The ring is manufactured from hardened gauge steel, which gives wear resistance and stable seating under repetitive use, preserving measurement reliability over time. Which tolerance class does the gauge comply with? The tool is made to DIN 13 with tolerance class 6g, matching standard metric ISO threading practices for general engineering applications. Can this gauge be used for documentation and traceability? Yes. The compact Go ring format is suitable for serial checks and can be recorded in inspection logs to maintain traceability within quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x1.5 Thread Gauge Go Right-Hand Metric ISO Fine Pitch, Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Reliable verification of M70 × 1.5 metric fine threads combined with a hardened gauge steel body and an included calibration certificate ensures reproducible inspection results and minimal downtime; order the gauge directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Thread ring gauge GO M70 x 1.5 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread ring gauge GO M70 x 1.5 is a hardened steel inspection gauge for quick verification of right‑hand metric ISO fine threads in production, inspection and incoming goods control. Hardened gauge steel construction Calibrated with certificate included Conforms to DIN 13, tolerance 6g For right‑hand metric ISO fine thread M70×1.5 Speedy, standards‑compliant thread checks for production lines A hardened thread ring gauge provides a straightforward go/no‑go check that speeds up routine inspections and reduces stoppages on the shop floor. With its M70 × 1.5 nominal size and 6g tolerance class to DIN 13, this gauge offers a clear pass/fail decision without time‑consuming measurement setups. The robust construction in hardened gauge steel resists wear over repeated use, which supports consistent acceptance criteria across production batches and helps to lower scrap rates. Precision and repeatability that protect quality assurance Batch acceptance and final inspection benefit from a gauge that maintains geometry under everyday handling. The ring form delivers a direct reference to the thread profile and pitch; the 1.5 mm thread pitch is matched to metric fine‑thread standards so the check is meaningful for components manufactured to ISO specifications. Regular use of a calibrated master gauge shortens inspection time while ensuring repeatable results, supporting traceability chains and simplifying documentation in quality records. Durable design and simple handling for inspection benches Constructed from hardened gauge steel, the ring gauge resists deformation and offers long service life even in busy environments. The compact, ring‑type geometry is simple to handle and ideal for bench inspection, incoming goods checks or inline verifications where quick decisions are required. Its weight and finish are engineered for stability and tactile feedback during the check, enabling operators to perform reliable verification without elaborate fixtures. Traceability and documentation for audit readiness Delivered with a calibration certificate, the gauge supports metrological traceability and meets internal audit demands for measurement equipment control. This certificate documents the inspection status at delivery and facilitates integration into calibration schedules. For manufacturing and quality teams seeking dependable Go/No‑Go control of metric fine threads, the inclusion of formal calibration reduces administrative follow‑up and ensures the gauge is ready for immediate use in controlled inspection processes. Secure production confidence with the Metav IndustryLine GO M70 x 1.5 — contact Metav Werkzeuge for fast supply and technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.770.6 GTIN: 4054469152608 Size: M70 × 1.5 Material: gauge steel, hardened Norm: DIN 13, 6g Weight: 2 kg Tariff code: 90173000 Delivered with calibration certificate Facts Nominal thread size: M70 Thread pitch: 1.5 mm Tolerance class: 6g Weight: 2 kg Special features Right‑hand metric ISO fine thread Calibrated — calibration certificate included Category: Thread ring gauge (Go) Manufacturer: Metav IndustryLine FAQ What is the intended use for this ring gauge? The Metav IndustryLine thread ring gauge GO M70 x 1.5 is intended for go/no‑go verification of right‑hand metric ISO fine threads in production, inspection and incoming goods control. Does the gauge come with calibration documentation? Yes. The thread ring gauge is delivered with a calibration certificate that documents the inspection status at delivery and supports traceability. Which standard and tolerance class does the gauge comply with? The gauge conforms to DIN 13 and is manufactured to 6g tolerance, matching standard specifications for metric fine threads. Is the gauge suitable for high‑volume shop‑floor use? The hardened gauge steel construction and ring form make it suitable for frequent go/no‑go checks in high‑volume environments while maintaining long‑term geometric stability. Who manufactures this thread gauge? The product is supplied under the Metav IndustryLine brand and is produced to the stated DIN specification and tolerance class Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x1.5 Thread Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Reliable inspection of large metric fine threads is achieved with hardened gauge steel construction, DIN‑compliant geometry and a supplied calibration certificate; the result is reproducible GO control for production and quality assurance. Order the thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread plug gauge M70 x 1.5 — GO gauge, right‑hand, DIN 13 6H (Metav IndustryLine) The thread plug gauge M70 x 1.5 checks right‑hand metric fine threads to DIN 13 6H, suitable for workshop inspection and incoming goods control in metalworking environments. Hardened gauge steel construction M70 × 1.5 metric fine thread Right‑hand, DIN 13 6H compliance Supplied with calibration certificate Ensure correct thread fit on first inspection A dedicated thread plug gauge with nominal size M70 x 1.5 provides a straightforward GO check that confirms whether internal threads meet the required profile and tolerance class. The GO function verifies the minimum material condition so that fast, pass/fail decisions are possible at the control station. Compliance with DIN 13, 6H ensures the gauging geometry matches standard metric fine‑thread practice, which simplifies documentation and traceability within production routines. Robust construction for repeatable measurements Manufactured from hardened gauge steel, the gauge resists wear and preserves contact geometry across many inspection cycles, reducing rework and downtime. The right‑hand thread orientation and the precision ground flanks mean the tool is optimised for direct engagement with finished components. As a plain GO gauge, it offers a low‑effort inspection method without the need for complex measurement equipment, making it suitable for plant-floor checks and assembly verification alike. Calibrated and ready for quality systems Delivered with a calibration certificate, the gauge supports documented quality control activities and can be entered into inspection schedules immediately after receipt. The supplied certificate documents the measured conformity of the gauge to the specified tolerance and enables straightforward traceability for audits. For users seeking integration into structured QA processes, the calibrated gauge removes the initial burden of first‑time verification and streamlines acceptance into inventory. Choose Metav IndustryLine's calibrated thread plug gauge M70 x 1.5 — contact Metav Werkzeuge in Emmerich for purchase details and technical advice Technical data SKU: M315.570.6 GTIN: 4054469152127 Size: M70 x 1.5 Material: gauge steel, hardened Standard: DIN 13, 6H Weight: 2 kg Tariff number: 90173000 Core specifications Thread form: metric fine thread Orientation: right‑hand Inspection type: GO (pass/fail) Included document: calibration certificate Materials and features Hardened gauge steel for wear resistance DIN‑compliant gauging geometry Suitable for workshop and incoming inspection Categories: Gauges; Thread gauges Manufacturer: Metav IndustryLine FAQ What thread sizes does the gauge check? The M70 x 1.5 thread plug gauge is made specifically for M70 × 1.5 metric fine internal threads and verifies right‑hand threads to the DIN 13 6H tolerance class. Is the gauge ready for use on delivery? Yes. The gauge is supplied with a calibration certificate, so the M70 x 1.5 plug gauge can be entered into inspection procedures immediately after receipt. What material is the gauge made from? The plug gauge is manufactured from hardened gauge steel, chosen for its wear resistance and long‑term stability in production environments. Does the plug gauge provide a pass/fail result or a measured value? This tool functions as a GO gauge, offering a clear pass/fail inspection method for quick acceptance of internal threads without producing a numerical measurement. Can this gauge be used for incoming goods control and process checks? Yes. The calibrated M70 x 1.5 plug gauge is intended for both incoming inspection and on‑line process checks where reproducible GO testing is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x1.5 Thread Plug Gauge For Metric ISO Fine Thread Right Hand, Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction and DIN 13, 6H conformity combined with an included calibration certificate for reliable go/no‑go rejection testing of M70 fine threads; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge M70 x 1.5 (reject) — right‑hand, hardened gauge steel by Metav IndustryLine A Thread plug gauge M70 x 1.5 (reject) for swift verification of metric ISO fine internal threads (right‑hand), designed for production control and incoming inspection in machine shops and inspection laboratories Calibrated certificate included Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Right‑hand metric fine thread M70×1.5 Reliable go/no‑go control for fine‑thread production The reject gauge serves as a straightforward, fast inspection tool for internal threads with a nominal size of M70 x 1.5, enabling immediate acceptance or rejection decisions on the shop floor. As a plug‑type gauge manufactured to DIN 13, 6H, it provides a fixed‑limit check that removes ambiguity from pass/fail assessments; the mechanical nature of the device translates measurement tolerance into a binary outcome, which greatly reduces inspection time and improves process throughput. Traceable calibration that supports quality systems Delivered with a calibration certificate, the gauge supplies documentary evidence required for quality assurance and audit trails. Calibration ensures that the gauge's dimensions are verified against traceable standards, which is essential when integrating inspection results into statistical process control or certification documentation. The presence of a certificate increases confidence in measurement data and aids compliance with customer and regulatory requirements. Durable construction for long‑term accuracy Made from hardened gauge steel, the plug gauge resists wear and maintains dimensional stability under repetitive use, extending service life and protecting measurement integrity. The robust material choice combined with precise machining ensures repeatable engagement with internal threads; this construction minimises the risk of edge deformation that can otherwise compromise go/no‑go checks and reduce the need for frequent rework or replacement. Practical fit for inspection routines and fixtures The right‑hand design and standard metric pitch make the gauge compatible with common thread forms in industrial components, allowing straightforward integration into inspection benches and gauge sets. Its compact, single‑purpose format simplifies handling and storage compared with adjustable instruments, and its dedicated function helps standardise checks across teams and shifts, supporting consistent quality decisions during production and incoming goods inspections. For assured thread inspection and traceable results, request the Metav IndustryLine M70 x 1.5 reject plug gauge through Metav Werkzeuge or speak with our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.670.6 GTIN: 4054469152363 Thread size: M70 x 1.5 Weight: 2 kg Facts Pitch: 1.5 mm Tolerance class: 6H Tariff number: 90173000 Special features Material: hardened gauge steel Type: reject (no‑go) plug gauge Thread direction: right‑hand Standard: DIN 13 Supplied with calibration certificate FAQ What is the primary purpose of this plug gauge? The thread plug gauge M70 x 1.5 (reject) is used for rapid go/no‑go assessment of internal metric ISO fine threads, providing immediate pass/fail verification on component inspection. Does the gauge come with traceable calibration? Yes, the Metav IndustryLine M70 x 1.5 reject plug gauge is supplied with a calibration certificate, documenting verification against traceable standards. Which standard does the gauge comply with? The gauge is manufactured to DIN 13 with a tolerance class of 6H, matching common specifications for metric internal threads. Is this gauge suitable for left‑hand threads? No, this particular gauge is a right‑hand design; left‑hand thread verification requires a corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x1.5 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand Calibrated, DIN 13 6g - Metav IndustryLine
Take advantage of a hardened gauge-steel construction, precise DIN 13 tolerance class 6g, and an included calibration certificate to secure reproducible thread inspection and reduce downstream rejects; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge NO-GO M70 x 1.5 (right-hand) — hardened gauge steel, DIN 13 (6g) by Metav IndustryLine The Thread ring gauge NO-GO M70 x 1.5 is a right-hand, no-go inspection ring for metric ISO fine threads, designed to identify out-of-tolerance threads in production and incoming inspection. No-go ring gauge M70 x 1.5, right-hand Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Delivered with calibration certificate Ensure only conforming threads pass inspection A dedicated no-go ring gauge serves as the simplest, fastest barrier against non-conforming threads. Made from hardened gauge steel, this ring provides a stable reference for repeat checks and short-cycle control at the inspection bench. The DIN 13 standard and the 6g tolerance class mean the device is tailored for metric ISO fine threads, enabling clearly defined acceptance criteria that reduce subjective judgements on the shop floor. The mechanical design prioritises repeatability so that measurements remain consistent during routine checks. Durable construction for repetitive use and clear reject decisions The gauge’s material and heat treatment yield high wear resistance and dimensional stability, which translates into fewer gauge changes and lower lifetime cost per check. As a purpose-built no-go artefact, it removes ambiguity from thread verification: a tight fit indicates a probable rejection, preventing defective parts from progressing. The relatively compact mass supports easy handling across inspection stations while the robust steel body withstands daily use in a production environment, making it suitable for quality control in metalworking and assembly operations. Traceability and conformity backed by a calibration certificate Delivered with a calibration certificate, this ring gauge documents its inspection status and measurement traceability, supporting quality management and audit requirements. The certificate confirms that the instrument has been assessed and recorded before dispatch, which simplifies incoming inspection procedures and evidences conformity for suppliers and auditors. For regulated environments or when tighter process control is needed, the presence of a calibration record ensures that the gauge can be integrated into documented quality workflows. Contact Metav Werkzeuge today to discuss the suitability of this Metav IndustryLine no-go ring gauge with calibration certificate and to request availability or application guidance Technical data SKU: M315.870.6 GTIN: 4054469152844 Material: Lehrenstahl, gehärtet Size: M70 x 1.5 Norm: DIN 13, 6g Weight: 2 kg Customs tariff number: 90173000 Facts Type: No-go ring gauge Thread form: Metric ISO fine thread Hand: Right-hand Category path: Messgeräte / Lehren Special features Delivered with calibration certificate Intended for thread inspection and quality control Robust, hardened gauge-steel construction FAQ What is the primary purpose of this ring gauge? The ring gauge is a no-go ring gauge M70 x 1.5 intended to detect out-of-tolerance metric ISO fine threads and to provide a quick go/no-go decision during inspection. Is a calibration certificate supplied with the gauge? Yes, the Metav IndustryLine ring gauge is supplied with a calibration certificate that documents its inspection status at delivery. Which thread standard and tolerance does the gauge follow? The gauge conforms to DIN 13 and is manufactured to the 6g tolerance class for metric ISO fine threads. What material is the gauge made from and why is that important? Manufactured from hardened gauge steel, the gauge offers wear resistance and dimensional stability important for repeated use in production environments. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x2 Thread Go Gauge For Metric ISO Fine Thread, Right Hand, Hardened Gauge Steel DIN 13 6H With Calibration Certificate - Metav IndustryLine
Benefit from a hardened gauge steel construction, compliance with DIN 13 (6H) and an included calibration certificate; order the Go thread plug gauge M70 x 2.0 directly via Metav Werkzeuge or consult our advisors if required. Go thread plug gauge M70 x 2.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) A Go thread plug gauge M70 x 2.0 for rapid verification of right‑hand metric ISO fine threads in production control and incoming inspection Hardened gauge steel construction Calibrated and supplied with certificate Conforms to DIN 13, tolerance 6H Consistent inspection speed for production workflows The Go thread plug gauge is designed to provide a quick, reproducible pass check of internal threads, helping to maintain production flow and reduce handling time in serial inspection. Its compact, robust form is intended for repetitive use on the shop floor; the hardened construction keeps the gauge dimensionally stable under frequent contact. The result is a reliable, wear‑resistant tool that supports faster decision‑making at the gauge station. Clear conformity for traceable quality control Made to DIN 13 with a 6H tolerance, this plug gauge provides an objective statement about thread conformity against widely recognised standards. The presence of a calibration certificate documents the gauge condition at delivery and supports traceability in quality records. Where formal inspection protocols are required, the supplied certificate facilitates integration into existing inspection routines without additional immediate paperwork. Material choice and durability explained Manufactured from hardened gauge steel, the gauge resists everyday abrasion and maintains its functional geometry under normal workshop conditions. The right‑hand thread profile and the precise M70 x 2.0 pitch are produced to ensure immediate fit assessment of mating parts. This combination of material resistance and accurate thread form reduces the frequency of replacements and contributes to lower operating downtime. Practical applications and handling recommendations Suited to incoming inspection, in‑process checks and quick acceptance tests, the plug gauge is a direct means to confirm internal thread conformity for components manufactured to the metric ISO fine thread series. Its straightforward use—engage the gauge and verify unrestricted entry for a Go result—makes it suitable for machinists and quality technicians alike. For long‑term accuracy, store the gauge clean and dry and include it in regular calibration cycles as documented on the supplied certificate. For secure and traceable thread inspection choose the Metav IndustryLine Go thread plug gauge M70 x 2.0 and contact Metav Werkzeuge for expert advice and prompt supply. Technical data Article number: M315.570.7 GTIN: 4054469153087 Tariff number: 90173000 Numbers / Core technical data Thread size: M70 x 2.0 Weight: 2 kg Tolerance class: 6H Designs / Special features Material: gauge steel, hardened Gauge type: Go (GUT) plug gauge, right‑hand thread Standard: DIN 13 Supplied with calibration certificate FAQ What is this gauge used for? The Go thread plug gauge M70 x 2.0 is used to verify that internal right‑hand metric ISO fine threads meet the specified tolerance class and will accept mating external threads. Does the gauge come with documentation for quality records? Yes, the plug gauge is supplied with a calibration certificate, which documents the condition of the gauge at delivery and supports traceability in quality systems. What standard and tolerance does the gauge comply with? The tool is manufactured to DIN 13 and conforms to tolerance class 6H for metric ISO threads, ensuring compatibility with common engineering and inspection requirements. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the plug gauge is designed for wear resistance and dimensional stability under routine inspection use. Is this a Go gauge and what does that mean practically? Yes — marked as a Go (GUT) plug gauge; it confirms that an internal thread accepts the nominal mate. A free entry indicates conformity for the Go condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x2 Thread Go Gauge, ISO Fine Pitch Metric Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise go/no‑go control, hardened gauge steel construction and an included calibration certificate to secure consistent thread inspection results. Order the gauge directly via Metav Werkzeuge or contact our consultants for specification advice. Thread plug gauge 'No‑go' M70×2 — No‑go plug gauge for metric ISO fine thread, right‑hand (Metav IndustryLine) Thread plug gauge 'No‑go' M70×2 provides go/no‑go verification for metric ISO fine threads in production and quality control environments No‑go plug gauge for M70×2 threads Hardened gauge steel construction Conforms to DIN 13, tolerance class 6H Delivered with calibration certificate Reliable go/no‑go control for metric ISO fine threads The plug serves as a dedicated no‑go inspection tool for M70×2 metric ISO fine threads, designed to flag parts that exceed permissible limits. By checking the part against the defined DIN 13 tolerance and 6H class, the gauge delivers an immediate pass/fail result that simplifies in‑line decisions. This direct verification method reduces inspection time compared with full-form measurement and supports faster throughput on the shop floor while maintaining traceable quality control. Durable construction for repeatable measurements Manufactured from hardened gauge steel, the gauge is built for sustained use in workshop and production settings where repeatability matters. The material selection and heat treatment ensure high wear resistance so that dimensional stability is retained over many mating cycles. The right‑hand thread geometry is finished to match the target profile, enabling consistent contact and minimal measurement uncertainty during routine checks. Traceable calibration and documented conformity The tool is supplied with a calibration certificate, providing documented evidence of its inspection status and traceability. This documentation supports internal quality procedures and external audits, making it easier to demonstrate conformity during process reviews. Routine re‑calibration intervals can be planned on the basis of recorded usage and the initial certificate, ensuring the inspection device remains a reliable element of the control chain. Practical benefits for production and quality assurance Using a dedicated plug gauge streamlines go/no‑go decisions, decreases rework and prevents non‑conforming assemblies from progressing down the line. The simple tactile check complements dimensional measuring equipment by offering an efficient means to segregate unacceptable components at the earliest stage. For production teams and quality engineers, the gauge presents a pragmatic balance of speed, clarity and compliance with recognised thread standards. Contact Metav Werkzeuge today for supply and advice on Metav IndustryLine thread gauges and ensure your thread inspection process is both efficient and fully documented. Technical Data Article number: M315.670.7 GTIN: 4054469153469 Tariff number: 90173000 Net weight: 2 kg Delivered with calibration certificate Facts Thread size: M70×2 Thread direction: Right‑hand Standard: DIN 13 Tolerance class: 6H Special features Material: hardened gauge steel Function: no‑go (reject) plug gauge Application: inspection of metric ISO fine threads Category: plug gauge / thread gauge FAQ What does "no‑go" mean for this gauge? A no‑go plug indicates whether a thread exceeds the maximum material condition; the Thread plug gauge 'No‑go' M70×2 (Metav IndustryLine) must not fit into accepted parts and therefore identifies out‑of‑tolerance components. Is the gauge traceable for audits and quality records? Yes. The gauge is supplied with a calibration certificate that documents its inspected status and supports traceability in quality systems for the Metav IndustryLine plug gauge M70×2. Which standard does this thread gauge comply with? The plug gauge is manufactured to meet DIN 13 and the 6H tolerance class for metric ISO fine threads, suitable for standardised thread inspection routines. What material is used for the gauge and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so that the inspection result remains reliable over repeated use. Can this gauge be used for both production and laboratory inspection? Yes. The plug gauge is suitable for shop‑floor production checks and as part of documented inspection procedures where a clear go/no‑go decision is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x2 Thread Go Ring Gauge Metric ISO Fine Right-Handed Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of repeatable go/no-go inspection, hardened gauge steel construction and an included calibration certificate for immediate, traceable use; order the Go thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go Thread Ring Gauge M70 x 2.0 (DIN 13, 6g) — Metav IndustryLine The Go Thread Ring Gauge M70 x 2.0 is a right‑hand, metric ISO fine‑thread checking gauge designed for fast acceptance testing in production and quality control environments. Hardened gauge steel construction Calibrated with certificate included DIN 13 tolerance class 6g Go ring gauge, right‑hand thread Streamlined pass/fail inspection to keep production flowing The Go gauge provides a definitive pass result for threads manufactured to the DIN 13, 6g tolerance. Used at inspection stations or inline testing points, this ring gauge reduces decision time by delivering immediate acceptance verification; parts that pass the gauge can proceed without further dimensional sorting. The clear binary outcome supports higher throughput and fewer stoppages, contributing to measurable productivity gains on the shop floor. Where frequent checks are required, the rapid handling of a ring gauge minimises cycle time compared with detailed metrological measuring. Robust construction for long‑term repeatability Manufactured from hardened gauge steel, the tool resists wear under repeated contact and preserves the calibrated form over long service intervals. The stable material choice and precise finishing ensure consistent fit, which means fewer measurement deviations and lower rework rates. The compact, purpose‑built geometry of the ring delivers reliable tactile feedback during a check cycle, while the durable finish reduces surface damage from handling. Regular visual inspection and adherence to a calibration plan maintain the reproducibility that production controls demand. Traceability and conformity made practical A calibration certificate is supplied with the gauge, providing documented traceability for quality systems and audits. The certificate supports recorded acceptance criteria and simplifies compliance checks when referencing the DIN 13 thread standard and the specified 6g tolerance class. As a go‑only ring gauge for a right‑hand metric fine thread, it should be integrated into a control plan that specifies acceptance limits and inspection frequency. For incoming goods control, final inspection or process verification, the gauge offers a pragmatic balance between speed and documented assurance. Choose Metav IndustryLine’s Go ring gauge for reliable, repeatable thread acceptance — contact Metav Werkzeuge for tailored technical advice and prompt supply from Emmerich Technical data Article number: M315.770.7 GTIN: 4054469153674 Designation: Go thread ring gauge M70 x 2.0 Material: hardened gauge steel Standard: DIN 13, 6g Thread hand: right‑hand Weight: 2 kg Tariff number: 90173000 Calibration: calibration certificate included Numeric data Nominal thread: M70 Pitch: 2.0 mm Tolerance class: 6g Special features Go (GUT) ring gauge only Suitable for metric ISO fine threads Hardened for wear resistance Delivered with calibration certificate FAQ What does the "GUT" designation signify for this ring gauge? The "GUT" designation indicates a Go gauge: the Go Thread Ring Gauge M70 x 2.0 (Metav IndustryLine, SKU M315.770.7) is intended to confirm that a thread meets the specified acceptance form. Is a No‑Go gauge supplied with the Go ring? No; this item is supplied as a Go ring gauge only and does not include a No‑Go counterpart. Which thread standard and tolerance class does this gauge check? The gauge checks metric ISO fine threads to DIN 13 with a 6g tolerance class, suitable for standard engineering and production specifications. Is the gauge ready for use on receipt? Yes, the gauge is supplied with a calibration certificate and is ready for immediate use in quality control or production inspection. For which applications is this ring gauge most suitable? Typical uses include incoming inspection of threaded components, in‑process checks on production lines and final acceptance testing of fasteners or threaded parts produced to M70 x 2.0 tolerances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x2 Thread Go/No-Go Ring Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of traceable inspection with a hardened gauge-steel construction and precise DIN 13, 6g tolerance — ideal for reproducible quality control of metric fine threads. Order the gauge directly via Metav Werkzeuge or contact our consultants for advice on integrating the ring into existing inspection routines. Thread No-go Gauge Ring M70 x 2.0 — Metric ISO fine pitch, hardened gauge steel (Metav IndustryLine) The Thread No-go Gauge Ring M70 x 2.0 is a right‑hand, metric ISO fine‑pitch limit gauge for acceptance testing and quick go/no‑go decisions in production and inspection environments Hardened gauge steel construction Metric ISO fine pitch M70 x 2.0 Right‑hand thread, DIN 13, 6g Supplied with calibration certificate Reliable, repeatable inspection for production control A dedicated no‑go ring provides a fast, unambiguous check for thread conformity. Manufactured from hardened gauge steel, this limit gauge resists wear and maintains dimensional integrity under frequent use, reducing rework and inspection uncertainty. The combination of robust material and a clearly defined tolerance class makes the tool suitable for routine in‑process checks as well as final quality control, supporting a consistent production flow and quicker decision making on the shop floor. Conforms to standards and supports traceability Designed to the DIN 13, 6g specification and marked for the nominal size M70 x 2.0, the ring offers a standards‑based reference for metric fine threads. It is supplied with a calibration certificate, ensuring traceability and documented conformity for audits and supplier quality agreements. Using a calibrated limit gauge reduces the need for time‑consuming measurement setups when the objective is a pass/fail assessment, thereby increasing throughput while maintaining documented quality assurance. Practical benefits for workshop and inspection benches The no‑go design is optimised for rapid handling and clear results: the ring either enters the threaded part (indicating reject) or it does not, eliminating interpretation errors common with subjective assessments. The hardened construction and precise machining minimise dimensional drift, which means fewer replacements and longer intervals between re‑calibrations. This makes the tool an economical choice where high inspection frequency and operational reliability are priorities. Contact Metav Werkzeuge for tailored advice on integrating calibrated thread gauges into existing inspection workflows and to ensure the correct limit gauge for specific production tolerances Technical data SKU: M315.870.7 GTIN: 4054469153889 Tariff number: 90173000 Weight: 2 kg Numbers / Core technical data Nominal size: M70 Pitch: 2.0 mm Tolerance class: 6g Thread direction: Right‑hand Designs / Special features Material: gauge steel, hardened Standard: DIN 13 Function: no‑go / reject ring for pass/fail testing Supplied with calibration certificate Category: limit gauge (thread ring) FAQ What is the purpose of a no‑go gauge ring? A no‑go gauge ring is used for quick pass/fail checks of internal or external thread conformity; the Thread No‑go Gauge Ring M70 x 2.0 confirms whether a thread exceeds the maximum allowable material condition. Is the ring calibrated on delivery? Yes, the ring is supplied with a calibration certificate, ensuring documented measurement traceability for the Metav IndustryLine gauge. Which standard does the gauge comply with? The part is manufactured to DIN 13, 6g, matching the common metric ISO fine‑thread specification for reliable compatibility with production tolerances. Can this gauge be used in high‑throughput inspection stations? The hardened construction and clear go/no‑go functionality make the gauge suitable for frequent use in production environments and automated inspection routines where a binary decision is required. Is the thread direction or size indicated on the gauge? Yes; the ring is specified for right‑hand threads at M70 x 2.0, and markings on the part identify nominal size and tolerance class. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com