Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M70x3 Thread Gauge For Metric ISO Fine Thread, Right-Hand, With Calibration Certificate - Metav IndustryLine
Precise pass/fail inspection is delivered by a hardened gauge steel body and strict adherence to DIN 13 / 6g, combined with a supplied calibration certificate for traceability. Order the thread gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge M70 x 3.0 — No-Go Gauge for Metric ISO Fine Threads (Right-hand), Metav IndustryLine The Thread Ring Gauge M70 x 3.0 is a dedicated no-go control for right-hand metric ISO fine threads, designed for fast go/no-go checks in production and incoming inspection. No-go ring gauge for M70 x 3.0 Complies with DIN 13 / 6g Hardened gauge steel for durability Supplied with calibration certificate Fast, reliable thread inspection for production lines A dedicated no-go ring gauge simplifies pass/fail decisions at the inspection point. The M70 x 3.0 control allows operators to verify whether a component exceeds maximum material limits without need for measurements or interpretation. By using a physical limit gauge the process becomes repeatable and rapid, reducing inspection times and removing subjective judgement from routine checks. The practical result is fewer assembly issues and faster acceptance of conforming batches. Robust construction for frequent use Built from hardened gauge steel, the design prioritises wear resistance and dimensional stability under repeated use. The right-hand thread geometry follows the metric fine pitch specification, ensuring the gauge engages in the same way as the part under test. The solid construction supports consistent tactile feedback during checks, which helps to maintain operator confidence and reduces the likelihood of false rejects over long production runs. Traceable conformity that fits quality systems Conformity with DIN 13 / 6g provides a clear normative basis for inspection criteria. Delivery includes a calibration certificate, ensuring traceability from the workshop to the quality record and supporting audit requirements. For production environments where documentation and demonstrable control are required, the combination of a standardised gauge and certified calibration helps to protect against costly rework and supports continuous quality improvement. For reliable thread control and documentation, contact Metav Werkzeuge for technical matching and supply — Metav IndustryLine specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M315.870.8 Label: Gewinde-Lehrring AUSSCHUSS M 70 X 3,0 für metrisches ISO-Feingewinde, rechts Category: Gauges — Thread gauges Weight: 2 kg Thread size: M70 x 3.0 Tariff number: 90173000 GTIN: 4054469154657 Material: Gauge steel, hardened Standard: DIN 13 / 6g Function: No-go ring gauge (reject control) Special feature: Supplied with calibration certificate Thread direction: Right-hand FAQ What is the primary purpose of this gauge? The Thread Ring Gauge M70 x 3.0 is intended as a no-go (reject) ring for quick go/no-go verification of metric ISO fine threads, enabling immediate assessment of whether parts exceed maximum material limits. Does the gauge meet recognised standards? Yes, the ring is manufactured to match DIN 13 / 6g, providing a normative reference for inspections carried out with the Metav IndustryLine gauge. Is a calibration certificate provided with the product? A calibration certificate is supplied with the M70 x 3.0 ring gauge, ensuring measurement traceability and supporting quality documentation requirements. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel; this material choice ensures long-term wear resistance and dimensional stability for repeated use in production and inspection environments. For which applications is this thread gauge suitable? This no-go ring is suitable for inspection of right-hand metric ISO fine threads in production, incoming inspection and assembly control where rapid pass/fail decisions are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x3 Thread Gauge For Metric ISO Fine Thread, Right-Handed With Calibration Certificate, DIN 13 6g - Metav IndustryLine
Take advantage of precise, standards-compliant inspection with a hardened Go ring gauge that speeds up thread checks and reduces rework; supplied with a traceable calibration certificate and backed by Metav Werkzeuge’s quality assurance—order the gauge via Metav Werkzeuge or consult their advisors for application support. Go thread ring gauge M70 x 3.0 — Go gauge for metric ISO fine threads (right-hand) — Metav IndustryLine The Go thread ring gauge M70 x 3.0 is a hardened ring gauge for quick verification of metric ISO fine threads in production and incoming inspection; designed as a right‑hand Go gauge to confirm acceptance within the DIN 13, 6g tolerance class. Go ring gauge M70 x 3 for metric ISO fine threads Hardened gauge steel construction Delivered with calibration certificate Complies with DIN 13, 6g Faster conformity checks with reproducible acceptance criteria A hardened Go ring gauge provides immediate, go/no‑go inspection that removes ambiguity from routine thread checks. By matching the DIN 13, 6g tolerance, the gauge defines the acceptance limit for fine metric threads and thereby simplifies decision making at the control station. The hardened gauge steel construction ensures long wear life and constant mating conditions, which maintains measurement consistency across batches and reduces the need for repeated checks. Supplied with a calibration certificate, the tool supports traceability in your QA documentation and streamlines audits. Practical advantages on the shop floor and in QC labs Using a dedicated ring gauge accelerates throughput: one tactile test replaces time‑consuming dimensional measurement when the aim is a clear acceptance judgement. The right‑hand Go gauge format confirms internal thread form quickly, lowering inspection time and reducing production interruptions. As a robust workshop tool, it resists deformation under regular use; this durability translates into lower total cost of ownership and fewer unscheduled replacements. The compact, single‑purpose design integrates smoothly into incoming‑goods inspection, in‑process control and final inspection routines. Integration into quality systems and typical applications The gauge's key data — M70 x 3 thread size, DIN 13, 6g tolerance and hardened gauge steel material — makes it suitable for mechanical engineering, fastener production and maintenance workshops that require standardised, repeatable thread acceptance testing. The delivery includes a traceable calibration certificate, which supports documented conformity for internal records and supplier control. For assemblies and components where thread fit is critical, the ring gauge serves as a fast check to avoid downstream rework and assembly delays; it is also practical for use at goods‑in inspection points. Contact Metav Werkzeuge in Emmerich to specify the right inspection set for your production line and to secure calibrated, standards‑compliant gauges for immediate use Technical data Article number: M315.770.8 GTIN: 4054469154466 Label: Go thread ring gauge M70 x 3.0, right‑hand Dimensions and core data Thread size: M70 x 3 Tolerance/class: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Materials and features Material: hardened gauge steel Calibration: delivered with calibration certificate Thread direction: right‑hand, metric ISO fine thread Type: Go (GUT) ring gauge FAQ What does a Go ring gauge verify? A Go ring gauge confirms that an internal thread falls within the specified acceptance limit; the Go ring gauge M70 x 3.0 verifies that threads mate within the DIN 13, 6g tolerance for this size. Is the gauge supplied calibrated? Yes. The Metav IndustryLine Go ring gauge is delivered with a calibration certificate confirming the inspection status at the time of dispatch. Can this gauge be used for production line checks? Yes. The hardened construction and Go/no‑go principle make this ring gauge well suited for rapid production and incoming inspection tasks. What material is the gauge made from and why does it matter? The gauge is manufactured from hardened gauge steel, chosen for wear resistance and dimensional stability to keep acceptance criteria consistent over repeated use. Does the gauge indicate left‑ or right‑hand threads? This ring gauge is specified for right‑hand metric ISO fine threads with the size M70 x 3.0. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x3 Thread Go/No-Go Plug Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calib. Certificate - Metav IndustryLine
The combination of hardened gauge steel, DIN 13/6H conformity and an included calibration certificate ensures consistent pass/fail control in production. Use this no-go thread plug gauge to reduce rework and maintain traceability; order directly via Metav Werkzeuge or consult the team for application advice. No-go Thread Plug Gauge M70 x 3.0 — Hardened Gauge Steel, DIN 13/6H (Metav IndustryLine) The No-go Thread Plug Gauge M70 x 3.0 is a right-hand metric ISO fine-thread reject gauge designed for rapid pass/fail inspection in production, quality control and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, 6H Supplied with calibration certificate No-go plug gauge for M70 x 3.0 Consistent pass/fail control to cut rejects and downtime A dedicated no-go checking tool simplifies go/no-go decisions on the shop floor. As a thread plug gauge, it provides an unambiguous reject criterion: if the no-go end enters, the thread fails the specification. Built from hardened gauge steel, the gauge resists wear and preserves the acceptance limit over repeated cycles, which reduces the need for frequent rework and helps maintain throughput. The hardened construction offers a stable reference geometry that keeps inspection routines fast and repeatable. Conformity and traceability that support quality assurance Manufactured to DIN 13, 6H, the gauge matches the tolerance class expected for metric ISO fine threads, enabling immediate compatibility with standard documentation and inspection plans. Delivery includes a calibration certificate, which documents the inspection status at the time of delivery and supports traceability in internal audits. Traceable calibration and a clear conformity statement simplify record-keeping during batch releases and statistical process control. Practical design for efficient workshop use The gauge’s right-hand thread geometry and clear size marking (M70 x 3.0) make it straightforward to integrate into routine checks. Its robust construction and balanced weight facilitate handling without excessive operator fatigue, while the compact profile allows use at assembly stations and in inspection benches alike. Using a dedicated reject plug gauge speeds decision-making and reduces measurement variability compared with ad hoc methods. Durability and material explanation for long service life Made from hardened gauge steel, the tool offers elevated wear resistance and dimensional stability under typical workshop conditions. Hardened steel ensures that the calibration state remains valid across many inspection cycles, lowering the frequency of recalibration and downtime. Where a documented measurement baseline is required, the supplied calibration certificate provides immediate evidence of the gauge’s conformity at handover. Contact Metav Werkzeuge for a quotation or technical consultation about the Metav IndustryLine gauge M315.670.8 and to discuss suitability for specific production tolerances. Technical data Article number: M315.670.8 GTIN: 4054469154275 Tariff code: 90173000 Facts Thread: M70 x 3.0 Weight: 2 kg Right-hand thread Special features Material: hardened gauge steel Standard: DIN 13, 6H Supplied with calibration certificate Function: no-go (reject) plug gauge FAQ What does "no-go" mean for this plug gauge? A no-go plug gauge is the reject reference; if the no-go end enters the thread, the component does not meet the specified tolerance. The Metav IndustryLine no-go gauge M315.670.8 is intended solely to detect oversize or out-of-tolerance threads. Is the gauge delivered with documentation for audits? Yes, delivery of this Metav IndustryLine gauge includes a calibration certificate that documents the inspection status at delivery and supports traceability for audits. Which standard does the gauge comply with? The plug gauge conforms to DIN 13, tolerance position 6H, making it suitable for metric ISO fine-thread inspection as specified in standard production documentation. Can this gauge be used in serial inspection on the shop floor? The robust construction and hardened steel make the gauge suitable for repetitive, shop-floor pass/fail checks; regular calibration intervals should be scheduled according to in-house quality procedures. What material is the gauge made from and why does it matter? Manufactured from hardened gauge steel, the material choice enhances wear resistance and dimensional stability, preserving the acceptance limits and reducing frequency of recalibration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x3 Thread Master Go Plug Gauge Metric ISO Fine Thread Right, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13, 6H conformity and the included calibration certificate for dependable thread inspection results. Order the gauge directly via Metav Werkzeuge or contact the consultants for application advice. GO thread plug gauge M70 x 3.0 — Metric ISO fine thread, right-hand (Metav IndustryLine) A GO thread plug gauge M70 x 3.0 for rapid verification of metric ISO fine threads in production and incoming inspection, designed as a right-hand acceptance gauge. Hardened gauge steel construction Conforms to DIN 13, 6H Supplied with calibration certificate Reliable verification for metric fine threads The GO gauge is engineered for fast, unambiguous acceptance checks on metric ISO fine threads. Constructed from hardened gauge steel, the plug provides a stable reference surface that resists wear during repeated use, which helps maintain dimensional integrity over time. The tool is sized M70 x 3.0 and manufactured to the tolerance class specified in DIN 13, 6H, so it fits directly into established quality control routines and reduces the time needed for thread assessment on components and assemblies. Traceable accuracy and documented calibration Delivered with a calibration certificate, the gauge supports traceable inspection processes and documentation requirements in manufacturing and QA. The certificate documents the measurement status at delivery, enabling incorporation into inspection records and audit trails. Using a calibrated acceptance plug minimises subjective judgement in thread checks, improves repeatability, and contributes to lower scrap and rework rates—advantages that directly affect throughput and process reliability in production environments. Workshop-ready durability and process integration Built for routine workshop conditions, the plug gauge combines robust material selection with straightforward handling to support repetitive inspection tasks. The hardened construction simplifies maintenance and prolongs the service interval, while the GO-only configuration provides a clear pass condition during rapid checks at the machine or inspection bench. As part of the Metav IndustryLine range, this gauge benefits from a supplier approach that emphasises accessible precision: a practical, reliable instrument for quality-conscious workshops and inspection departments. Select the Metav IndustryLine GO thread plug gauge for dependable, calibrated thread checks and contact Metav Werkzeuge in Emmerich for tailored supply and application guidance. Technical data Article number: M315.570.8 GTIN: 4054469154084 Weight: 2 kg Tariff number: 90173000 Facts Thread size: M70 x 3.0 Standard / tolerance: DIN 13, 6H Hand: Right-hand Special features Material: hardened gauge steel Delivered with calibration certificate GO (acceptance) plug gauge Category: Thread gauges / plug gauges FAQ What is the primary use of this plug gauge? The plug gauge is used for fast acceptance checks of metric ISO fine threads; the GO condition confirms that an M70 x 3.0 thread meets the DIN 13, 6H acceptance criteria. Does the gauge arrive calibrated? Yes, the tool is supplied with a calibration certificate that documents its measurement status at delivery. Is this a GO or NOGO gauge? This product is a GO (acceptance) plug gauge intended to verify that threads are within specified limits; NOGO gauges are available separately for reject checks. What material is the gauge made from? The plug is made from hardened gauge steel for wear resistance and long-term dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x4 Thread Gauge Go Metric ISO Fine Right-Handed Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel design and DIN‑compliant tolerance to secure fast, repeatable thread inspection. The calibrated supply with certificate ensures traceable acceptance testing; order the gauge from Metav Werkzeuge or ask the consultants for application advice. Thread ring gauge GUT M70×4 — metric ISO fine thread, hardened, DIN 13 (Metav IndustryLine) The Thread ring gauge GUT M70×4 is a right‑hand gauge for quick verification of metric ISO fine threads in workshop and production inspection. Hardened gauge steel construction DIN 13 tolerance 6g fit Supplied with calibration certificate Reliable conformity for series inspection The ring is made from hardened gauge steel, providing long service life and stable geometry under routine inspection loads. With a nominal size of M70×4 and a 4.0 mm pitch, the gauge matches the DIN 13 specification and the 6g tolerance class, allowing rapid Go/No‑Go checks during incoming inspection and process control. Using a fixed‑limit gauge streamlines quality workflows and reduces measurement time compared with full gauging sequences, so production throughput is maintained without compromising compliance. Traceability and measured assurance Supplied with a calibration certificate, the gauge supports documented traceability for audits and quality records. The certificate confirms the acceptance check at delivery and enables immediate integration into quality systems. The robust design resists wear and, when combined with regular verification, preserves acceptance boundaries; this leads to fewer production interruptions and more predictable inspection cycles, which is particularly valuable for batch manufacturing and toolrooms. Practical benefits for workshop and inspection benches Designed as a right‑hand metric ISO fine thread gauge, this component is easy to handle on the bench and quick to apply in process checks. The compact, solid construction minimises deformation during handling and ensures consistent Go/No‑Go function over time. The ring’s specification and finish permit straightforward storage and use with standard gauge holders or dedicated racks, helping to keep inspection points organised and enabling immediate, reproducible decisions about part conformity. Contact Metav Werkzeuge in Emmerich for application guidance on Metav IndustryLine gauges and request the calibrated M70×4 thread ring gauge with certificate for traceable inspection results Technical data SKU: M315.770.9 GTIN: 4054469155197 Thread size: M70×4 Right‑hand thread Material: hardened gauge steel Standard: DIN 13, 6g Weight: 2 kg Customs tariff: 90173000 Special feature: supplied with calibration certificate Facts Nominal diameter: 70 mm Pitch: 4.0 mm Fit class: 6g Weight: 2 kg GTIN numeric: 4054469155197 Materials and features Hardened gauge steel Metric ISO fine thread Right‑hand Go/No‑Go function DIN 13 tolerance specification Calibration certificate included Brand: Metav IndustryLine FAQ What is the intended use of this ring gauge? The ring gauge is intended for Go/No‑Go verification of metric ISO fine threads; the Metav IndustryLine Thread ring gauge GUT M70×4 checks conformity to DIN 13, 6g. Is the gauge delivered calibrated? Yes, the gauge is supplied with a calibration certificate, so the calibrated Metav IndustryLine ring gauge can be placed directly into documented inspection routines. Which materials is the gauge made from? The gauge is manufactured from hardened gauge steel to ensure dimensional stability and wear resistance during repeated use. What tolerance and standard does the gauge comply with? The gauge is specified to DIN 13 with a fit class of 6g, suitable for standard metric fine thread acceptance testing. Can this gauge be used in production control or only for final inspection? The robust construction and DIN conformity make the gauge suitable for both in‑process checks and final acceptance testing in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x4 Thread Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of the combination of hardened gauge steel construction, DIN 13, 6H conformity and a supplied calibration certificate for reliable, repeatable thread inspection. Order the product directly via Metav Werkzeuge or ask our consultants if needed. Thread plug gauge GO M70 x 4.0 — Metric ISO fine thread, hardened gauge steel (DIN 13, 6H) — Metav IndustryLine A Thread plug gauge GO M70 x 4.0 for right‑hand metric ISO fine threads, designed for fast acceptance checks and quality control in production and inspection environments. Hardened gauge steel construction Delivered with calibration certificate Compliant with DIN 13, 6H M70 x 4.0 metric fine thread, right-hand Maintain consistent thread quality across production A GO plug gauge of this size is a pragmatic tool for inline quality control. The M70 x 4.0 gauge verifies internal thread form and basic functional fit quickly, reducing inspection time compared with full metrological evaluation. Compliance with DIN 13, 6H defines the tolerance class and ensures that acceptance criteria are met for metric ISO fine threads. Used as a first‑pass check, the gauge helps prevent the assembly of non‑conforming parts and therefore lowers rework rates and scrap. Built for repeatability and shop‑floor use Manufactured from hardened gauge steel, the plug is resistant to wear and remains stable under frequent handling, which supports consistent results over many cycles. The compact, single‑piece design yields a robust feel and predictable performance; together with its mass and balance it is easy to seat in a component without introducing error. This durability translates into fewer tool changes and longer intervals between recalibrations, which benefits throughput and lowers total inspection cost. Traceable inspection and integration into quality routines The gauge is supplied with a calibration certificate, providing traceability and documentation for quality management systems. As a GO (accept) plug gauge, it integrates seamlessly into go/no‑go inspection stations and sampling plans used in production or incoming inspection. Clear labelling and the included certificate make the component suitable for formal quality records and audit trails, supporting consistent decision making and supplier control. For assured thread verification, specify the Metav IndustryLine GO plug gauge M70 x 4.0 and contact Metav Werkzeuge for expert advice and prompt supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M315.570.9 GTIN: 4054469154831 Type: GO (accept) thread plug gauge Thread size: M70 x 4.0 Direction: right-hand Material: gauge steel, hardened Standard: DIN 13, 6H Facts Weight: 2 kg Tariff number: 90173000 ECLASS: 21170228 Special features Delivered with calibration certificate Suitable for metric ISO fine threads Category: thread gauges / plug gauges Brand: Metav IndustryLine FAQ What thread size does this gauge check? The plug gauge checks internal threads of M70 x 4.0, i.e. metric ISO fine threads in the specified size range. Which tolerance standard does the gauge conform to? Conformity is with DIN 13, 6H; the gauge is produced to match the acceptance limits for that tolerance class. Is the gauge supplied with calibration evidence? Yes, the plug gauge is delivered with a calibration certificate documenting the inspection status at delivery. How is the GO plug gauge used in inspection? The GO gauge is used as a pass/no‑pass check for the functional acceptance of internal threads; if the GO plug engages correctly, the thread meets the basic fit criteria. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x4 Thread Go Plug Gauge Metric Fine Pitch Right-Hand With Calibration Certificate DIN 13 6H - Metav IndustryLine
Combining hardened gauge steel, conformity to DIN 13 (6H) and an included calibration certificate, this plug gauge provides dependable thread inspection and audit traceability; order the thread plug gauge directly via Metav Werkzeuge or consult our specialists if technical clarification is required. Thread plug gauge M70×4,0 — Metric ISO fine thread, right-hand (Metav IndustryLine) Thread plug gauge M70×4,0 for inspection of right-hand metric ISO fine threads; manufactured from hardened gauge steel to DIN 13 (6H) for consistent acceptance testing Hardened gauge steel construction DIN 13, tolerance class 6H Supplied with calibration certificate M70×4 right-hand metric fine thread Ensure repeatable thread conformity in production A purpose-built plug gauge accelerates go/no-go assessment and reduces ambiguous judgements on threaded parts. By matching the M70×4 pitch and profile to DIN 13 (6H), the gauge ensures that threads produced to the specification are identified clearly at first inspection. The hardened surface maintains gauge geometry under frequent use, so batch checks remain consistent over time. This clarity in measurement translates into fewer rework cycles and more efficient quality control, supporting production throughput and predictable assembly performance. Robust design for sustained workshop use Constructed from hardened gauge steel, the instrument resists wear and surface damage that can compromise accuracy. The geometry and finishing are selected to withstand repeated engagement with mating threads while preserving the reference profile required for reliable inspection. Durability of the material and heat treatment reduces the frequency of replacement, lowering operating costs and downtime. The gauge’s solid build also simplifies handling during manual inspection routines, making repetitive checking straightforward and time-efficient. Traceable calibration for audit-ready documentation Delivered with a calibration certificate, the gauge supports traceability and audit requirements without additional procurement steps. The certificate documents conformity after calibration, enabling straightforward record-keeping for quality systems and supplier audits. Where documented evidence of inspection tools is required, this supplied paperwork streamlines compliance and reduces administrative effort during process validation or customer inspections. Practical fit for shop-floor and laboratory controls The plug gauge is intended for direct integration into routine inspection workflows, providing fast acceptance checks for threaded components, assemblies and fastener interfaces. Its right-hand metric ISO fine thread geometry suits fine-pitch applications where thread engagement and dimensional fidelity are critical. Using this type of gauge facilitates clear pass/fail decisions on the shop floor and helps maintain consistent product quality across production shifts and different operators. For certified thread inspection with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich to arrange supply of the M70×4 plug gauge and obtain specific application advice Technical data Article number: M315.670.9 GTIN: 4054469155012 Size: M70×4 Material: Gauge steel, hardened Standard: DIN 13, 6H Weight: 2 kg Special feature: Supplied with calibration certificate Thread hand: Right-hand Category: Gauges / Plug gauges FAQ What thread type does the gauge check? The gauge checks metric ISO fine threads with the M70×4 profile and is produced for right-hand threads. Is the gauge supplied calibrated? Yes, the plug gauge is supplied with a calibration certificate documenting the inspection status at delivery. Which tolerance class is represented by this gauge? The instrument corresponds to DIN 13, 6H, ensuring the correct tolerance fit for acceptance testing. What material is the plug gauge made from? Manufactured from hardened gauge steel to ensure wear resistance and long-term dimensional stability. Can this gauge be used for routine production checks? Yes, the gauge is designed for shop-floor acceptance testing and quick go/no-go verification of threaded parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x4 Thread Ring Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6g, With Calibration Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel construction, conformity to DIN 13, 6g, and an included calibration certificate to ensure reliable rejection of oversize threads in serial production. Order the No‑go thread ring gauge directly via Metav Werkzeuge or consult our experts for application advice and delivery details. No-go Thread Ring Gauge M70 x 4 (right-hand) – hardened gauge steel, DIN 13/6g No-go Thread Ring Gauge M70 x 4 is a dedicated inspection tool for verifying metric ISO fine external threads in production and quality control environments No-go ring gauge M70 x 4, right-hand Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6g Delivered with calibration certificate Ensure tolerance control at the point of production A dedicated No-go ring checks that an external thread does not exceed the maximum material condition; if the gauge enters, the thread must be rejected. This function safeguards assembly fit and prevents downstream failure, translating thread measurement into an immediate production decision. The M70 x 4 size and DIN 13, 6g designation match common ISO fine-thread specifications, so the gauge integrates directly into standard inspection routines without interpretation ambiguity. Durable design for repetitive use and minimal maintenance Manufactured from hardened gauge steel, the ring is built to withstand repetitive engagement with threaded parts while maintaining dimensional stability. Robust material choice reduces wear and the frequency of replacements, which improves uptime and lowers lifecycle cost. Clear marking and a substantive feel on handling support quick operator recognition during batch checks; the result is consistent, repeatable rejection criteria across shifts and inspectors. Traceable calibration to support quality systems The delivery includes a calibration certificate, providing documented traceability for internal audits and supplier quality agreements. Evidence of calibration supports quality management processes and simplifies acceptance during supplier or customer audits. Where traceable verification is required, the supplied certificate demonstrates that the gauge met the specified control standards at the point of dispatch. Choose the Metav IndustryLine No‑go ring gauge to secure thread quality—contact Metav Werkzeuge in Emmerich for tailored advice, delivery options and calibration details. Technical data Article number: M315.870.9 GTIN: 4054469155371 Manufacturer: Metav IndustryLine Material: gauge steel, hardened Size: M70 x 4 Thread hand: right-hand Standard: DIN 13, 6g Special: calibration certificate included Weight: 2 kg Facts Thread size M70 x 4 Tolerance class 6g (DIN 13) Weight 2 kg GTIN 4054469155371 Special features No-go function (reject ring gauge) Hardened gauge steel Supplied with calibration certificate Category: gauges / thread inspection FAQ What does a No-go ring gauge check, and how is it used? A No‑go ring gauge detects external threads that exceed maximum tolerance; the ring must not enter a compliant thread. The No‑go Thread Ring Gauge M70 x 4 is used in production to reject oversize threads immediately. Is a calibration certificate included with this gauge? Yes; the gauge is delivered with a calibration certificate, providing traceability and documentation suitable for quality control records. Which standard does the gauge comply with? The ring conforms to DIN 13 and is manufactured to the 6g tolerance class for metric ISO fine threads. Can this gauge be used for left‑hand threads? This model is specified as a right‑hand thread gauge; left‑hand versions require a different item configured for the opposite thread hand. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x6 Thread Gauge Ring For ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise, repeatable reject control and robust construction to protect production quality; the combination of a hardened gauge steel body, DIN 13 tolerance class and a supplied calibration certificate ensures reliable inspection results. Order the gauge through Metav Werkzeuge or consult the team for application advice. Thread ring gauge NO‑GO M70 x 6.0 — hardened gauge steel, DIN 13 (Metav IndustryLine) A Thread ring gauge NO‑GO M70 x 6.0 for right‑hand metric ISO fine threads, designed for fast in‑process and final inspection in production and quality control. No‑Go gauge for M70 x 6 threads Hardened gauge steel core for longevity Supplied with calibration certificate Conforms to DIN 13 tolerance class 6g Faster reject decisions at the inspection point The No‑Go function shortens decision loops on the shop floor: a failed engagement immediately identifies out‑of‑tolerance threads so nonconforming parts are removed before downstream assembly. With its clear go/no‑go principle, the gauge reduces inspection time compared with dimensional measuring procedures and supports consistent throughput. The direct tactile check complements sampling plans and is especially effective where quick sorting is required without complex measuring equipment. Durable construction for consistent measurements Made from hardened gauge steel, the ring resists wear and maintains form over repeated use, delivering repeatable results in production environments. The use of a hardened material keeps the measuring edges stable so that the gauge retains its functional fit over time; this reduces recalibration frequency and contributes to lower life‑cycle costs. Conformity to DIN 13 and the 6g tolerance class provides a standardised reference for compatibility with metric ISO fine threads, assuring that the tool matches industry expectations. Traceable calibration for quality assurance Supplied with a calibration certificate, the gauge arrives ready for documented quality control and traceability. The issued certificate records the inspection status at delivery and supports internal quality audits as well as external supplier acceptance processes. For regulated production or formal inspection protocols, the documented calibration offers a clear record that the inspection device met defined conditions at the time of handover, simplifying traceability and audit trails. Contact Metav Werkzeuge for tailored procurement advice and to secure this Metav IndustryLine NO‑GO thread ring gauge with its traceable calibration certificate; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M315.870.A GTIN: 4054469155890 Designation: Thread ring gauge NO‑GO M70 x 6.0 (right‑hand) Manufacturer: Metav IndustryLine Facts Thread size: M70 x 6.0 Tolerance class: 6g Weight: 2 kg Tariff number: 90173000 Special features No‑Go gauge (AUSSCHUSS) Supplied with calibration certificate (mit Kalibrierschein) Right‑hand metric ISO fine thread Material: hardened gauge steel Standard: DIN 13 FAQ What is the purpose of a No‑Go thread ring gauge? A No‑Go thread ring gauge is used to verify that a threaded part exceeds the maximum allowable size; the Thread ring gauge NO‑GO M70 x 6.0 from Metav IndustryLine identifies threads that must be rejected. Which tolerance standard does this gauge follow? The gauge is manufactured to DIN 13 and rated for the 6g tolerance class, matching the specification for metric ISO fine threads. Is the gauge suitable for production use and repeated checks? Yes, the hardened gauge steel construction of the Metav IndustryLine gauge is designed for repeated in‑process checks and provides long‑term stability for routine inspection. Does the product include documentation for audits? The ring gauge is supplied with a calibration certificate, giving traceable documentation suitable for quality systems and audit requirements. Can this gauge be used for left‑hand threads? This specific item is a right‑hand gauge (M70 x 6.0); left‑hand checks require the corresponding left‑hand version or alternative tooling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x6 Thread Go Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of hardened gauge steel construction, conformity with DIN 13, 6g and delivery with a calibration certificate for reliable thread inspection. Benefit from a robust, right‑hand metric fine‑thread reference that supports consistent quality control—order directly via Metav Werkzeuge or consult our specialists for application advice. Go thread ring gauge M70 x 6.0 – right‑hand metric ISO fine‑thread inspection ring (Metav IndustryLine) The Go thread ring gauge M70 x 6.0 is a right‑hand reference for checking metric ISO fine threads in production and inspection environments, suitable for standard quality control and workshop testing. Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, 6g tolerance Right‑hand metric fine thread M70 x 6 Consistent pass/fail control for production runs A go‑type thread ring provides an unambiguous check in repetitive production environments: when the gauge enters the component without force, the thread meets the intended form. The combination of DIN 13, 6g conformity and a hardened testing surface ensures repeatable checks across batches, reducing scrap and rework. The reference nature of this ring supports inline inspection and quick acceptance testing on the shop floor, improving process throughput while maintaining measurement integrity. Robust construction that stands up to workshop use Made from hardened gauge steel, the inspection ring resists wear and retains thread geometry during repeated use. This robustness minimises the frequency of replacement and contributes to predictable inspection intervals. The compact, monolithic design reduces handling variables and preserves the critical thread profile; the right‑hand, fine‑thread form is tailored for components where pitch accuracy and flank form are decisive for assembly and sealing performance. Traceable calibration for documented quality assurance The gauge is delivered with a calibration certificate, providing traceability for internal quality systems and audits. Calibration documentation supports conformity assessments and helps fulfil traceability requirements in regulated production processes. The presence of a certificate simplifies integration into quality documentation and supports decisions based on verified reference conditions. Practical application and handling guidance Designed for workshop and manufacturing use, the ring serves as a rapid go check for threaded parts during final inspection, incoming goods testing and assembly control. The clear, physical pass/fail principle makes it suitable for operators and inspectors alike, while the hardened material and standardised DIN 13, 6g tolerance class permit reliable interchangeability with other reference tools in a calibrated set. Regular visual inspection and periodic recalibration keep the gauge within specification and ensure continued measurement certainty. Choose the Metav IndustryLine go thread ring gauge for dependable, documented thread inspection—contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.770.A GTIN: 4054469155760 Weight: 2 kg Facts Thread size: M70 x 6.0 Tariff number: 90173000 Material: hardened gauge steel Special features Conforms to DIN 13, 6g Right‑hand metric ISO fine thread Supplied with calibration certificate Manufacturer: Metav IndustryLine FAQ What kind of inspection is this ring gauge intended for? The ring is intended for go‑type inspection of metric ISO fine threads; the Go thread ring gauge M70 x 6.0 provides a clear pass/fail check for production and incoming inspection. Does the gauge include calibration documentation? Yes, the product is supplied with a calibration certificate that documents traceability and measurement status for the Go thread ring gauge M70 x 6.0. Which material is used for the gauge and why? The gauge is manufactured from hardened gauge steel to ensure wear resistance and long‑term stability of the thread form during repeated use. What does the DIN 13, 6g designation mean for usage? DIN 13, 6g specifies the thread form and tolerance class used for standard metric fine‑thread inspection; this makes the ring suitable for routine quality control aligned to common engineering standards. Can this gauge be used for left‑hand threads? This item is a right‑hand thread ring; left‑hand threads require a corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x6 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a precise no‑go thread plug gauge that secures assembly quality through hardened gauge steel and DIN‑class tolerance control; the included calibration certificate documents traceable verification and supports consistent pass/fail decisions. Order the plug gauge directly via Metav Werkzeuge or ask our consultants for procurement advice. Thread plug gauge M70 x 6.0 — No‑go plug for metric ISO fine thread, right‑hand (Metav IndustryLine) A thread plug gauge M70 x 6.0 designed for quick verification of metric ISO fine internal threads in right‑hand form, providing unambiguous reject signalling in production and quality control environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Calibration certificate included M70 x 6.0 right‑hand thread Reliable pass/fail inspection for production lines The primary purpose of this no‑go plug gauge is to deliver an immediate, objective check of internal thread conformity. Manufactured from hardened gauge steel, the gauge resists wear and preserves the inspection limit during repetitive use, which reduces rework and avoids false rejects. The DIN 13 classification and 6H tolerance reference mean the tool verifies threads against established ISO metrics, ensuring interchangeability across suppliers. Using a dedicated go/no‑go system simplifies decision making on the shop floor and shortens inspection time without complex measurement procedures. Traceable calibration and measurable benefits Supplied with a calibration certificate, the gauge documents the inspection state at delivery and supports quality records for audits. The certificate confirms that the tool was measured and documented before dispatch, enabling traceability in ISO‑aligned quality systems. As a no‑go master, the gauge prevents undersized internal threads from passing inspection: if the no‑go enters the thread, the component is flagged for rejection. This straightforward control method protects downstream assembly processes and reduces the risk of field failures, delivering clear efficiency gains in production monitoring. Practical applications and handling advantages Ideal for workshop check stations, incoming inspection and production control, the plug gauge is compact to handle and quick to use in repetitive checks. The M70 x 6.0 dimension and right‑hand form make it suitable for medium‑to‑large components with metric fine threads, such as housings, flanges and coupling parts. The hardened steel body preserves the plug profile under regular usage, while a clear go/no‑go criterion replaces subjective assessment with a binary decision. For procurement and process planners, this gauge represents a low‑complexity, high‑impact tool that supports consistent product quality and fewer stoppages. For reliable thread verification and documented calibration, request the Metav IndustryLine no‑go thread plug gauge from Metav Werkzeuge — our Emmerich team provides availability details and purchasing support to integrate this gauge into inspection routines. Technical data Article number: M315.670.A GTIN: 4054469155630 Material: gauge steel, hardened Standard: DIN 13, 6H Thread size: M70 x 6.0, right‑hand Weight: 2 kg Tariff number: 90173000 Facts Nominal diameter: 70 mm Thread pitch: 6.0 mm Tolerance class: 6H Mass: 2 kg Special features No‑go (reject) plug function Calibration certificate included Hardened gauge steel construction Right‑hand metric ISO fine thread FAQ What does the no‑go plug gauge check? The no‑go plug gauge checks whether an internal thread exceeds the allowable maximum material condition; if the no‑go enters, the workpiece is rejected. The thread plug gauge M70 x 6.0 serves as the reject master for metric ISO fine threads. Is the gauge ready for use on receipt? Yes, the gauge is delivered with a calibration certificate, confirming its measured state at dispatch and enabling immediate use in documented inspection routines. Which standard does this plug gauge follow? The gauge is made to DIN 13 with a 6H tolerance reference, matching metric ISO thread specifications for interchangeability. Can this gauge be used for left‑hand threads? This specific item is produced as a right‑hand plug gauge; left‑hand verification requires the corresponding left‑hand version. How does hardened gauge steel benefit daily inspection? Hardened gauge steel preserves the critical thread profile under repeated use, maintaining the inspection limit and reducing the need for frequent replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M70x6 Thread Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H With Calibration Certificate - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction and conformity to DIN 13, 6H for dependable thread acceptance checks; the plug gauge is supplied with a calibration certificate for immediate, traceable use. Order the thread plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GO M70 x 6.0 — metric ISO fine thread, right‑hand The Thread plug gauge GO M70 x 6.0 is a right‑hand Go gauge designed for fast acceptance testing of metric ISO fine threads in production and incoming inspection Hardened gauge steel construction Conforms to DIN 13, 6H Supplied with calibration certificate For M70 x 6.0 metric fine threads Reliable pass/fail inspection with fast throughput The Go plug permits immediate acceptance checks on threaded parts, enabling concise pass/fail decisions on the shop floor. Built to the DIN 13, 6H tolerance, the gauge ensures the thread form and pitch comply with the standard, which reduces ambiguity during sampling. The M70 x 6.0 sizing matches common fine‑thread requirements, and the right‑hand orientation is ready for standard production flows. Designed as a Go gauge, it confirms whether a thread meets minimum material allowance without additional measurement steps, speeding up inspection routines and lowering throughput time. Supplied calibrated for traceability and quality control Delivery includes a calibration certificate, so the gauge can be put into service immediately and entered into quality records without delay. This standard calibration documents traceability and measurement status at the time of shipment, supporting audit processes and supplier quality agreements. The presence of a calibration record simplifies conformity documentation and reduces the administrative overhead associated with first‑use verification, improving the reproducibility of inspection results across shifts and sites. Robust design tailored to workshop and inspection use Manufactured from hardened gauge steel, the plug resists wear from routine engagement and maintains form over many cycles, which prolongs service intervals and reduces replacement frequency. The solid construction and clear specification under DIN 13, 6H make the tool suitable for incoming inspection, in‑process checks and small batch production control. Metav’s position as a precision partner and quality filter for the European market adds further reassurance: the product range and distribution from Emmerich are backed by an extensive catalogue and a long history of serving more than 48,000 customers, ensuring reliable supply and consistent quality. Contact Metav Werkzeuge for tailored guidance on integrating the Metav IndustryLine GO M70 x 6.0 thread plug gauge into existing inspection processes and for delivery from our Emmerich site Technical data Article number: M315.570.A GTIN: 4054469155500 Label: Thread plug gauge GO M70 x 6.0 for metric ISO fine thread, right‑hand Facts Weight: 2 kg Thread size: M70 x 6.0 Tariff number: 90173000 eClass: 21170228 Special features Material: hardened gauge steel Standard: DIN 13, 6H Right‑hand thread orientation Supplied with calibration certificate FAQ What does "GO" mean for this thread plug gauge? The GO designation indicates the plug is used to verify that a thread is within acceptable limits; the Thread plug gauge GO M70 x 6.0 (Metav IndustryLine, SKU M315.570.A) must enter the thread without binding for the part to be accepted. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate, which documents its measurement status on delivery and supports traceability for quality records. Which standard does this gauge follow and why is it important? Conformity to DIN 13, 6H defines the thread form and tolerance class; using the Metav IndustryLine GO M70 x 6.0 ensures inspections are aligned with that recognised industrial standard. For which inspection tasks is this plug gauge suitable? The gauge is intended for incoming inspection, in‑process sampling and production acceptance checks where a quick Go/No‑Go decision on an M70 x 6.0 metric fine thread is required. What material is the gauge made from and how does that affect service life? Manufactured from hardened gauge steel, the plug offers good wear resistance under regular use, preserving the thread form and extending the interval between replacement or re‑calibration Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x1.5 Go Thread Ring Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6g Calibrated Certificate - Metav IndustryLine
Benefit from precise, hard-wearing gauging and an included calibration certificate for reliable thread verification in production and inspection. Combine repeatable measurement, durable gauge steel and documented traceability to keep processes running smoothly. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Go ring gauge M72 × 1.5 — Metric ISO fine thread, right-hand, hardened gauge steel (Metav IndustryLine) Go ring gauge M72 × 1.5 for verification of metric ISO fine threads in workshop and quality-control environments Go ring gauge for M72 × 1.5 threads Hardened gauge steel for long service life Conforms to DIN 13, 6g tolerance class Supplied with calibration certificate Reliable accuracy for routine inspection The supplied Go ring gauge is specified for an M72 × 1.5 metric ISO fine thread and manufactured to the DIN 13, 6g tolerance class, which ensures conformity with common engineering standards. As a functional gauge, the component marked GUT (Go) checks whether internal threads fall within the acceptable lower limit; this provides fast, unequivocal go/no‑go results that speed up routine checks and reduce interpretation errors. The clear pass/fail principle helps maintain production quality with minimal operator training. Built to withstand workshop conditions Machined from hardened gauge steel, the ring gauge offers high wear resistance and dimensional stability in repeated use. The robust material choice reduces the frequency of replacement and maintains tight tolerances over extended inspection cycles, supporting a lower total cost of ownership. The right‑hand orientation matches standard thread directions, so integration into established inspection jigs and go/no‑go benches is straightforward. The compact, single‑piece design simplifies handling and storage without compromising stiffness. Traceable calibration for quality systems Delivery includes a calibration certificate, providing documented traceability for internal audits and supplier quality records. The certificate documents the inspection status at the time of supply and supports process controls in manufacturing and incoming inspection. Where formal recordkeeping is required, the gauge can be entered into an asset register and scheduled for periodic re‑calibration to preserve measurement confidence across production batches. The combination of material stability and certification supports reliable results in regulated and high‑volume environments. For certified thread control and workshop-ready durability, contact Metav Werkzeuge in Emmerich to request the Metav IndustryLine Go ring gauge M72 × 1.5 with its calibration certificate. Technical data Article number: M315.772.6 GTIN: 4054469152615 Label: Gewinde-Lehrring GUT M 72 X 1,5 für metrisches ISO-Feingewinde, rechts Facts Thread size: M72 × 1.5 Tolerance class: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Special features Go gauge (GUT) Right-hand thread Material: hardened gauge steel Supplied with calibration certificate FAQ What does the GUT marking mean on the ring gauge? The GUT marking identifies this item as a Go ring gauge; the Go side accepts correct threads for the Metav IndustryLine ring gauge M72 × 1.5 (SKU M315.772.6) and confirms that internal threads meet the lower size limit. Is a calibration certificate included with delivery? Yes, the ring gauge is supplied with a calibration certificate documenting its inspected condition on delivery for use in quality systems and traceability records. Which standard does the gauge conform to? The gauge is manufactured to DIN 13 with a 6g tolerance class, suitable for verifying metric ISO fine threads in standard mechanical engineering applications. Can this gauge be used for left‑hand threads? No, this particular ring gauge is specified for right‑hand threads only; left‑hand versions must be ordered separately if required. What material is the gauge made from and how does that affect use? Constructed from hardened gauge steel, the ring gauge provides high wear resistance and dimensional stability, which supports repeated inspection cycles and long service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x1.5 Thread Go/No-Go Ring Gauge, ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, a DIN 13, 6g tolerance class and an included calibration certificate for assured production control; order directly via Metav Werkzeuge or consult our specialists for application guidance. Thread ring gauge No‑Go M72 x 1.5 — metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread ring gauge No‑Go M72 x 1.5 is a hardened ring gauge designed for reliable go/no‑go inspection of metric ISO fine external threads in right‑hand form Hardened gauge steel construction For M72 x 1.5 metric ISO fine threads Tolerance to DIN 13, 6g Supplied with calibration certificate Repeatable pass/fail inspection for production control The ring is manufactured from hardened gauge steel to endure frequent handling and provide a stable reference geometry over prolonged use. As a No‑Go ring for M72 x 1.5 threads, it complements go gauges in a two‑piece inspection routine to separate acceptable parts from rejects quickly. Meeting DIN 13, 6g ensures the gauge corresponds to established metric ISO fine‑thread tolerances, which reduces ambiguity during quality checks and speeds decision‑making on the shop floor. Traceable calibration for audit readiness A calibration certificate is supplied with the gauge, documenting inspection before dispatch and supporting traceability in quality systems. Although this item is supplied with a standard calibration record rather than ISO 17025 accreditation, the certificate provides a verifiable baseline for internal audits and incoming inspection procedures. The documented status reduces administrative effort during supplier qualification and helps maintain consistent acceptance criteria across production batches. Durable handling and workshop suitability Weighing approximately 2 kg and shaped for straightforward mounting and storage, the gauge balances robustness with practical handling. The hardened tool steel resists wear from repeated engagement with external threads, which lowers the frequency of replacement and helps preserve measurement integrity. The right‑hand geometry and metric pitch match common fine‑thread components, enabling immediate integration into existing inspection benches and gauges sets without adaptation. Supply reliability and specialist backing from Metav Offered under Metav IndustryLine, this ring gauge is part of a focused portfolio that combines industrial standards with wide availability from Emmerich. Metav’s stocking and distribution reduce lead times for essential inspection tools, and the company’s experience in precision measurement supports consistent product quality. For purchasers seeking dependable thread inspection hardware, the combination of specification conformity, traceable calibration and a reliable supply chain helps protect manufacturing uptime and conformity obligations. Choose the Metav IndustryLine No‑Go ring gauge for consistent thread control and contact Metav Werkzeuge for procurement or technical clarification from our Emmerich team. Technical data Article number: M315.872.6 GTIN: 4054469152851 Size: M72 x 1.5 Weight: 2 kg Material: Gauge steel, hardened Standard: DIN 13, 6g Tariff number: 90173000 Special note: No‑Go ring gauge (AUSSCHUSS) Calibration: Certificate included Facts Thread: M72 x 1.5 Pitch: 1.5 mm Tolerance class: 6g Right‑hand thread Mass: 2 kg Special features Hardened gauge steel construction Supplied with calibration certificate Designed for metric ISO fine threads Category: Thread ring gauge FAQ What is the intended use of this ring gauge? The No‑Go ring gauge is intended for rejection checks of external threads; the M72 x 1.5 No‑Go ring is used alongside a matching go gauge to separate acceptable parts from rejects. Is a calibration document supplied with the gauge? Yes, the gauge is delivered with a calibration certificate that documents the inspection status at delivery. Which standard does the gauge comply with? The ring corresponds to DIN 13, 6g, matching metric ISO fine‑thread tolerance specifications. What material is the ring made from? The gauge is made from hardened gauge steel, selected for wear resistance and dimensional stability. Is this a right‑hand or left‑hand gauge? This ring gauge is manufactured for right‑hand metric external threads (M72 x 1.5). Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x1.5 Thread Plug Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a rugged inspection solution that combines hardened gauge steel, precise adherence to DIN 13 (6H) and an included calibration certificate to keep production rejects under control and reduce rework. Order the Thread plug gauge NO‑GO M72 x 1.5 directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge NO‑GO M72 x 1.5 — hardened gauge steel, DIN 13 (6H) A Thread plug gauge NO‑GO M72 x 1.5 engineered for fast, unambiguous rejection testing of metric ISO fine internal threads in manufacturing and quality control. Hardened gauge steel construction DIN 13 thread tolerance class 6H Supplied with calibration certificate Ensure rejects are caught before assembly A dedicated NO‑GO plug gauge provides an immediate, reliable check that internal threads do not exceed the permitted maximum material condition. Used on the shop floor, this gauge converts a complex measurement into a simple pass/fail decision, speeding up inspections and preventing faulty components from advancing to assembly. The M72 x 1.5 size is tailored to metric fine-threaded interfaces, so deviation beyond the acceptable profile is detected at the point of control, lowering scrap rates and limiting costly rework. Robust build for repeatable inspection cycles Constructed from hardened gauge steel, the plug offers resistance to wear and maintains form over repeated engagement cycles. Conformity to DIN 13 with tolerance class 6H means the thread form is compatible with standard ISO metric fine-thread specifications; this ensures the gauge reflects the same envelope manufacturers must meet. The compact, single‑piece design keeps handling simple and repeatability high, while the heat-treated finish reduces the need for frequent refurbishment, translating into dependable long-term performance on production lines. Traceable calibration for documentary quality control The gauge is supplied with a calibration certificate, enabling traceability of inspection results and straightforward inclusion in quality documentation. Calibration ensures the rejection limit is verified prior to first use and supports audit processes and internal quality systems. For inventory and traceability, the article is listed under SKU M315.672.6 and GTIN 4054469152370, facilitating stock management and procurement workflows. The accompanying certificate simplifies certification requirements for both workshop-level checks and formal quality audits. For dependable rejection testing with Metav IndustryLine gauges, contact Metav Werkzeuge in Emmerich for tailored advice or to place an order — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M315.672.6 GTIN: 4054469152370 Article: Thread plug gauge NO‑GO M72 x 1.5, right‑hand Facts Thread size: M72 x 1.5 Tolerance class: 6H Weight: 2 kg Tariff code: 90173000 Special features Material: hardened gauge steel Standard: DIN 13 Function: NO‑GO (reject) plug gauge for internal threads Supplied with calibration certificate FAQ What is the primary purpose of this gauge? The gauge is a NO‑GO plug gauge for quick rejection testing of internal metric ISO fine threads; the Thread plug gauge NO‑GO M72 x 1.5 identifies threads that exceed the allowable profile. Is the gauge delivered calibrated? Yes, the Thread plug gauge NO‑GO M72 x 1.5 is supplied with a calibration certificate to provide traceability and support quality documentation. Which thread standard does this gauge follow? The tool is manufactured to DIN 13 and corresponds to tolerance class 6H, matching common ISO metric fine‑thread specifications. What material is the gauge made from and how durable is it? Made from hardened gauge steel, the gauge is engineered for durability and repeatable inspection cycles, minimising wear under normal use. Is this gauge suitable for right‑hand threads only? Yes, the product is a right‑hand NO‑GO plug gauge specifically for the M72 x 1.5 thread form. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x2 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a robust combination of hardened gauge steel, precise M72 x 2.0 sizing and a supplied calibration certificate to keep thread inspection reliable and reproducible. Order the gauge directly via Metav Werkzeuge or consult the Metav team for integration into existing quality routines. No‑go thread ring gauge M72 x 2.0 — hardened gauge steel, DIN 13 / 6g (Metav IndustryLine) No‑go thread ring gauge M72 x 2.0 designed for verification of external metric ISO fine threads; right‑hand thread No‑go ring for M72 x 2.0 metric fine thread Hardened gauge steel, DIN 13 / 6g tolerance Supplied with traceable calibration certificate Ensure reproducible inspection of external threads A dedicated no‑go ring provides a fast, objective decision during incoming or in‑process inspections. The M72 x 2.0 sizing corresponds to the standard metric fine thread form and, when used as part of a Go/No‑Go check, prevents the acceptance of shafts or studs that exceed permissible limits. The ring’s geometry is matched to DIN 13 / 6g, which makes dimensional conformity straightforward to interpret and reduces subjective judgement during manual checks. This leads to fewer false‑acceptances and a measurable reduction in rework and scrap. Durable construction with traceable calibration for quality assurance Manufactured from hardened gauge steel, this ring resists wear under repeated use and holds form where dimensional stability is critical. The supplied calibration certificate documents traceability and supports audit requirements in quality management systems. Material choice and certification together create a reliable reference standard for workshop and shop‑floor environments where traceability and repeatability are required. The robust finish and contact geometry preserve accuracy across many inspection cycles, extending service life and lowering lifetime cost of ownership. Simple integration into inspection routines and production control Designed as a dedicated inspection tool, the gauge fits naturally into first‑article checks, batch sampling and final acceptance procedures. The right‑hand thread designation clarifies application and avoids mix‑ups in assortments; the physical weight and size make handling predictable during routine checks. Used alongside documented procedures, the gauge supports rapid decisions at the production line and contributes to consistent delivery quality. Metav IndustryLine’s warehouse and quality filter in Emmerich ensure that the product arrives ready for immediate use and traceable documentation is included. Contact Metav Werkzeuge for an application review and request the Metav IndustryLine No‑go thread ring gauge M72 x 2.0 (M315.872.7) with calibration certificate to secure reproducible thread inspection in production Technical data Article number: M315.872.7 GTIN: 4054469153896 Label: No‑go thread ring gauge M72 x 2.0 Weight: 2 kg Facts Thread size: M72 x 2.0 Tolerance class: 6g Standard: DIN 13 Customs tariff number: 90173000 Special features Material: hardened gauge steel Right‑hand thread No‑go (reject) function for external threads Supplied with calibration certificate Category: Gauges / Thread ring gauge FAQ What is the difference between a no‑go ring and a go ring? A no‑go ring is intended to detect oversize or out‑of‑tolerance external threads; if the part enters the no‑go ring it must be rejected. The complementary go ring verifies that the minimum material condition is met. Does this gauge come with official documentation? Yes, the Metav IndustryLine no‑go thread ring gauge M72 x 2.0 is supplied with a traceable calibration certificate confirming the measured dimensions. Which standard and tolerance does the ring check to? The ring checks metric ISO fine threads to DIN 13 with tolerance class 6g, suitable for standard quality verification of external threads. Is the gauge suitable for right‑hand and left‑hand threads? This specific ring is manufactured for right‑hand threads; left‑hand versions must be specified separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x2 Thread Go Gauge, Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of fast, repeatable acceptance checks thanks to the combination of hardened gauge steel construction and clear conformity to DIN 13, 6g. The included calibration certificate ensures traceability for quality audits; order or request specification advice via Metav Werkzeuge for a reliable supply chain solution. GO Thread Ring Gauge M72×2.0 – Right‑hand metric ISO fine thread (Metav IndustryLine) A GO Thread Ring Gauge M72×2.0 designed for rapid verification of metric ISO fine threads in production and inspection environments Hardened gauge steel construction Includes calibration certificate DIN 13 tolerance 6g compliance Faster inspection, fewer production hold‑ups The GO gauge form enables quick go/no‑go decisions at incoming inspection or on the shop floor, reducing conveyor‑stop events and assembly delays. With the M72×2.0 designation and right‑hand thread geometry matched to metric ISO fine threads, this gauge provides an immediate, tactile pass criterion that speeds throughput. The robust construction in hardened gauge steel resists wear during repetitive checks, delivering consistent fits over many cycles and lowering the need for frequent replacements. Traceability and audit readiness for quality control Delivered with a calibration certificate, the gauge supports traceable verification routines and record keeping required for audits and internal quality procedures. The DIN 13, 6g specification gives a recognised benchmark for acceptance limits, so inspection records produced with this tool are directly comparable to statutory or contractual tolerances. Calibration details are provided as standard documentation with the gauge, simplifying compliance documentation and reducing administrative friction during supplier or customer audits. Built for workshop durability and straightforward use The compact, single‑purpose design focuses on reliable, repeatable measurements without superfluous parts. The hardened material and simple GO‑only inspection method mean minimal operator training is required while achieving consistent results in production and workshop contexts. As a purpose‑made thread ring gauge, it integrates easily into established control plans and fixtures, offering a durable solution for routine thread verification with low handling complexity. For dependable thread inspection and specification support, request the Metav IndustryLine GO ring gauge M72×2.0 and consult Metav Werkzeuge for delivery options and technical clarification Technical Data Article number: M315.772.7 GTIN: 4054469153681 Size: M72×2.0 Material: hardened gauge steel Standard: DIN 13, 6g Right‑hand thread Weight: 2 kg Numbers / Core technical data Weight: 2 kg Tariff number: 90173000 Tolerance class: 6g Special features GO gauge for acceptance testing Includes calibration certificate Hardened gauge steel construction Category: Gauging / Thread ring Suitable for metric ISO fine threads FAQ What thread form and tolerance does this gauge check? The ring gauge is specified for metric ISO fine threads in M72×2.0 format and conforms to DIN 13 with a tolerance class of 6g. Is the gauge intended as a GO or a GO/NO‑GO set? This product is supplied as a GO gauge for acceptance checks; it verifies that threads meet the intended major‑diameter and pitch form criteria. Is a calibration document supplied with the gauge? Yes, the gauge is delivered with a calibration certificate, providing traceability and documentation for quality records. What material is used and how does this affect service life? Manufactured from hardened gauge steel, the ring gauge offers high wear resistance and sustained dimensional stability under frequent use. Can the gauge be used directly in production inspection routines? The design is suited to shop‑floor and inspection‑station use, offering rapid tactile acceptance checks for routine thread verification. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x2 Thread Go Plug Gauge For Metric ISO Fine Thread, Right-Hand With Calibration Certificate, DIN 13 6H - Metav IndustryLine
Take advantage of precise thread inspection with a hardened GO plug gauge that combines DIN 13 conformity and a delivered calibration certificate for immediate traceability; order directly via Metav Werkzeuge or request application advice from our consultants. Thread plug gauge (GO) M72×2.0 — hardened gauge steel, DIN 13 6H, right‑hand The Thread plug gauge M72×2.0 (GO) is a compact inspection tool for fast go/no‑go verification of metric ISO fine threads in production and incoming inspection. Hardened gauge steel, durable finish Delivered with calibration certificate DIN 13 tolerance class 6H conformity GO plug gauge for right‑hand M72×2 threads Quick acceptance decisions for production flow A GO plug gauge provides an immediate, objective result for thread acceptance: the gauge either enters (GO) or it does not (no GO). This simple binary check reduces inspection time compared with measuring full thread profiles and supports high throughput on the shop floor. The M72×2.0 size addresses fine metric threads commonly found in assemblies and fittings, enabling rapid conformity checks that cut non‑conforming part rework and keep production moving. Robust construction for repeatable measurements Made from hardened gauge steel, the gauge resists wear and maintains form over repeated use, delivering consistent tactile feedback and longevity under workshop conditions. The tool is manufactured to DIN 13 with a 6H tolerance class, which aligns with standard mating part limits and simplifies acceptance criteria. Hardened construction combined with precise machining ensures that each verification is repeatable, reducing measurement uncertainty and supporting reliable assembly fit‑up. Traceable calibration and quality assurance Delivered with a calibration certificate, the gauge arrives ready for documented use in quality systems and audits; the certificate provides traceability and confirms conformity to the specified geometry. As a GO plug gauge intended for right‑hand threads, it is a purpose‑built inspection instrument that integrates easily into incoming inspection, final inspection or in‑process checks. Metav’s distribution from Emmerich acts as a quality filter for European workshops, offering dependable logistics and a single point of contact for technical enquiries and procurement. For an inspection solution tailored to thread requirements, contact Metav Werkzeuge for application guidance or to order the Metav IndustryLine M72×2.0 plug gauge with full calibration documentation and shipment from Emmerich Technical data SKU: M315.572.7 GTIN: 4054469153094 Material: gauge steel, hardened Norm: DIN 13, 6H Thread size: M72×2.0 Thread hand: right‑hand Included: calibration certificate Manufacturer: Metav IndustryLine Weight: 2 kg Facts Nominal diameter: 72 mm Thread pitch: 2.0 mm Tolerance class: 6H Tariff code: 90173000 eClass: 21170228 Special features GO plug gauge (GUT) Hardened gauge steel for wear resistance Delivered with calibration certificate for traceability Category: gauges / plug gauges FAQ What is the intended use of this plug gauge? The plug gauge is intended for go/no‑go verification of metric ISO fine threads, providing quick acceptance checks for production and inspection workflows. Does the gauge include calibration documentation? Yes, the gauge is supplied with a calibration certificate, which documents the measured parameters and supports traceability in quality systems. Which standards does the gauge comply with? Manufactured to DIN 13 with a 6H tolerance class, the gauge matches standard thread acceptance criteria for mating parts. Is the gauge suitable for right‑hand or left‑hand threads? This particular plug gauge is specified for right‑hand threads in M72×2.0 format. What material is the gauge made from and why does it matter? The gauge is machined from hardened gauge steel, chosen for wear resistance and stability so that inspection results remain repeatable over many cycles. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x2 Thread Plug Go/No-Go Gauge Metric ISO Fine Right-Hand With Calibration Certificate - Metav IndustryLine
Take advantage of a precise inspection method that combines hardened gauge steel, compliance with DIN 13, 6H, and a supplied calibration certificate to keep thread quality under reliable control; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge (No‑Go) M72 x 2.0 — right‑hand, hardened gauge steel (Metav IndustryLine) Thread plug gauge (No‑Go) M72 x 2.0 is a hardened plug gauge for verification of right‑hand metric ISO fine threads to DIN 13, 6H, intended for production and quality‑assurance inspection Hardened gauge steel for long service life ISO metric fine thread M72 x 2.0, right‑hand Supplied with calibration certificate Fast decision on acceptability with durable construction A robust No‑Go plug gauge enables quick, binary checks during series inspection: if the No‑Go side enters the thread, the component must be rejected. Manufactured from hardened gauge steel, the tool resists wear and maintains dimensional stability over repeated use, which reduces the need for frequent replacements and secures reproducible inspection results. The compact, single‑piece design supports rapid handling at the inspection station and shortens throughput time, delivering a measurable improvement in process efficiency. Clear conformity to international thread standards The geometry follows DIN 13, 6H, matching the tolerancing of metric ISO fine threads and ensuring compatibility with standard production practices. As a dedicated right‑hand thread gauge in size M72 x 2.0, it provides unambiguous verification of thread form and pitch without the interpretation required by visual methods. The supplied calibration certificate documents the initial dimensional status, creating a verifiable trace for quality records and internal audits and supporting consistent acceptance criteria in incoming inspection and final control. Practical benefits for workshop and QA teams Integrating this plug gauge into routine checks reduces downstream rework by catching out‑of‑tolerance threads at the earliest stage. The hardened material and precise manufacturing help to keep maintenance needs low and measurement uncertainty predictable, which supports leaner inventory control and fewer production interruptions. For applications that require documented measurement evidence, the certification accompanying the gauge offers immediate traceability and eases compliance with internal quality procedures. For reliable rejection testing on metric fine threads, choose the Metav IndustryLine No‑Go plug gauge M72 x 2.0 and contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M315.672.7 GTIN: 4054469153476 Brand: Metav IndustryLine Designation: Thread plug gauge No‑Go M72 x 2.0 Net weight: 2 kg Facts Thread size: M72 x 2.0 Standard: DIN 13, 6H Tariff code: 90173000 Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Reject function (No‑Go) Supplied with calibration certificate Category: Gauges / Measuring pins FAQ What is the primary function of this gauge? The No‑Go plug gauge checks whether a right‑hand metric ISO fine thread M72 x 2.0 exceeds acceptable limits; if the No‑Go side enters, the thread is out of tolerance. Is the plug gauge delivered calibrated? Yes — the gauge is supplied with a calibration certificate documenting its measured condition at delivery. Which standard does the gauge conform to? The thread geometry is produced to DIN 13, 6H, ensuring compatibility with standard metric ISO fine‑thread specifications. Can the gauge be used on left‑hand threads? No; this particular plug gauge is manufactured for right‑hand threads only and matches the M72 x 2.0 right‑hand form. How durable is the gauge in daily use? Made from hardened gauge steel, the plug gauge is designed for long service life under typical production inspection cycles; regular visual inspection and adherence to calibration intervals will preserve accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x3 Screw Gauge Thread Ring Metric ISO Fine Pitch Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a purpose-built rejection gauge that combines clear go/no‑go functionality, hardened gauge‑steel durability and traceable calibration for reliable incoming‑inspection workflows. Order the gauge directly via Metav Werkzeuge for assured quality and prompt dispatch. Thread Plug Gauge M72 x 3.0 — No‑Go, right‑hand, hardened gauge steel (Metav IndustryLine) The Thread Plug Gauge M72 x 3.0 serves as a dedicated rejection check for right‑hand metric ISO fine threads, intended for rapid go/no‑go verification in quality control and incoming goods inspection. Hardened gauge steel construction Includes calibration certificate Conforms to DIN 13, 6H Consistent reject detection that speeds inspection The No‑Go function of this plug gauge provides a fast, unambiguous verdict during visual and mechanical inspection: a part that does not accept the rejection mandrel exceeds the allowable limits and is immediately identified for rework or disposal. Manufactured to M72 x 3.0 nominal dimensions and specified for right‑hand thread applications, the gauge reduces decision time at the control bench and minimises subjective interpretation. Using a dedicated rejection mandrel gives a tangible benefit in throughput: fewer manual measurements are required and downstream processes receive reliably screened components, improving overall production flow. Durable design for long service life and measurement integrity Made from hardened gauge steel, the mandrel resists wear and maintains dimensional stability under repeated use. The robust material choice and heat treatment ensure that the functional diameter and thread form remain within tolerance over many cycles, reducing frequency of replacement and ensuring consistent boundary checks. Compliance with DIN 13, 6H ensures compatibility with standard ISO metric fine threads, while the hardened construction supports repetitive inspection tasks in workshop and shop‑floor environments without rapid degradation. Calibration and traceability that support quality systems Supplied with a calibration certificate, the gauge arrives ready for integration into documented quality procedures and process audits. Traceability of the calibration event provides the evidential link required for inspection records and quality management systems; the certificate documents the measured condition at the time of delivery. For organisations operating documented inspection plans, this provenance simplifies acceptance of the mandrel as a reference tool and supports repeatable audit trails. Practical fit for inspection workflows and storage The compact form of the thread mandrel makes it straightforward to include in inspection kits for incoming goods, assembly stations or first‑piece control. Its single‑purpose design—reject verification for M72 x 3.0 threads—keeps the inspection routine simple and fast, while the hardened gauge material minimises maintenance. When used alongside calibrated go gauges and visual checks, the mandrel contributes to a layered verification strategy that balances speed with documented assurance. Choose the Metav IndustryLine M72 x 3.0 No‑Go thread plug gauge for dependable rejection control and calibration traceability — contact Metav Werkzeuge in Emmerich for product details and secure supply. Technical data Article number: M315.672.8 GTIN: 4054469154282 Tariff number: 90173000 Weight: 2 kg Facts Thread size: M72 x 3.0 Direction: right‑hand Standard: DIN 13, 6H Weight: 2 kg Special features Material: hardened gauge steel Supplied with calibration certificate Type: rejection (No‑Go) thread plug gauge Intended use: verification of metric ISO fine threads FAQ What is the primary function of this plug gauge? The plug gauge performs a clear reject (No‑Go) check for M72 x 3.0 right‑hand metric ISO fine threads; if the mandrel does not enter, the thread is out of tolerance. Is the gauge ready for use on delivery? Yes — the mandrel is delivered with a calibration certificate, allowing immediate use in documented inspection processes. Which standard does the gauge comply with? The gauge is manufactured to DIN 13, 6H, ensuring conformity with common metric ISO fine‑thread specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x3 Thread Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g, Cal Certificate - Metav IndustryLine
Hardened gauge‑steel construction and DIN 13, 6g tolerance deliver reproducible rejection checks; supplied with a traceable calibration certificate for documented quality control. Take advantage of the combination of robust measurement integrity, clear compliance to thread standards and simple implementation into inspection routines. Order the thread ring gauge directly via Metav Werkzeuge or ask their consultants for application advice. Thread ring gauge No‑Go M72×3 — hardened gauge steel, DIN 13 (Metav IndustryLine) A thread ring gauge No‑Go M72×3 designed for fast rejection checks on metric ISO fine threads; right‑hand execution for workshop and production inspection. Hardened gauge steel construction DIN 13, 6g tolerance class Supplied with calibration certificate Right‑hand metric fine thread M72×3 Reliable rejection control that protects production quality A purpose‑built no‑go ring provides a clear pass/fail decision at the inspection point. The hardened gauge‑steel body and the adherence to DIN 13, 6g ensure that thread checks are reproducible and resistant to normal shop wear. By eliminating subjective judgement during go/no‑go tests, the gauge reduces the risk of incorrectly accepted parts and helps to avoid downstream assembly issues. The ring format guarantees axial guidance during engagement, which keeps the assessment straightforward and repeatable even on the shop floor. Traceable calibration for audit‑ready documentation This gauge is supplied with a calibration certificate, enabling documented traceability for quality management and audits. The included certificate provides an evidence base for inspection records and supports internal control plans or external quality checks. Having a certified reference means inspection results can be archived with confidence, which simplifies compliance tasks and reduces the administrative effort connected with quality assurance procedures. Practical design and handling for routine inspection The M72×3 geometry addresses metric fine‑threaded components common in heavy machinery and tooling. Constructed from gauge steel, hardened, the ring remains dimensionally stable during repeated use; its nominal size and 3 mm pitch are clearly marked for rapid identification. The right‑hand thread orientation suits standard production processes, and the compact ring form reduces handling time compared with more complex measuring equipment. The SKU M315.872.8 denotes the exact item configuration for ordering and inventory control. Where this gauge adds value in the process chain Ideal for incoming inspection, in‑process checks and final verification, the gauge is well suited to machine shops, toolrooms and quality departments working to metric ISO fine‑thread standards. By streamlining rejection decisions, it supports lean inspection workflows and reduces rework. The gauge is particularly useful where rapid throughput and clear acceptance criteria are required; it complements other gauging tools and can be integrated into standard operating procedures for thread verification. Contact Metav Werkzeuge for availability of the Metav IndustryLine M72×3 No‑Go thread ring gauge and for technical advice on integrating it into existing inspection routines Technical data SKU: M315.872.8 GTIN: 4054469154664 Designation: Thread ring gauge No‑Go M72×3 Material: Gauge steel, hardened Standard: DIN 13, 6g Special feature: Supplied with calibration certificate Numeric data Nominal diameter: 72 mm Thread pitch: 3 mm Weight: 2 kg Customs tariff number: 90173000 Special features Type: No‑Go (reject) thread ring Thread direction: Right‑hand Application: Metric ISO fine thread inspection Delivery: Calibration certificate included FAQ What is the primary function of this gauge? The M315.872.8 thread ring gauge (Metav IndustryLine) serves as a No‑Go check for M72×3 metric fine threads, providing a definitive rejection test during inspection. Is a calibration certificate included with the gauge? Yes, the thread ring gauge is supplied with a calibration certificate to document measurement traceability and support quality records. Which tolerance class does the gauge comply with? The ring is manufactured to DIN 13, 6g, matching the standard tolerance band for metric fine threads. Can this ring gauge be used for left‑hand threads? No; the product is produced as a right‑hand thread ring and is intended for right‑hand threaded components only. Which applications is this ring gauge best suited for? The gauge is suitable for incoming inspection, in‑process control and final verification of metric ISO fine threads in metalworking and assembly contexts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x3 Thread Go Ring Gauge Metric ISO Fine Pitch Right Hand DIN 13 6g With Calibration Certificate - Metav IndustryLine
Take advantage of DIN 13 traceability, hardened gauge‑steel construction and the clearly defined M72 × 3.0 fine‑thread specification for consistent in‑process inspection. The ring arrives as a GUT (Go) gauge and is supplied with a calibration certificate — order the ring directly via Metav Werkzeuge or consult our advisors for application support. GUT Thread Ring Gauge M72 × 3.0 — Right‑hand metric ISO fine thread gauge (Metav IndustryLine) A GUT Thread Ring Gauge M72 × 3.0 for fast verification of metric ISO fine threads in production control and incoming inspection. DIN 13 tolerance 6g verification Hardened gauge steel construction Right‑hand metric fine thread M72 × 3 Supplied with calibration certificate Consistent thread checks for production reliability The ring gauge is designed for rapid, repeatable verification of metric ISO fine threads and serves as a practical Go‑check in production lines and inspection benches. Manufactured from hardened gauge steel, the tool preserves its measuring edges under frequent use, helping to reduce rejects and rework. Compliance with DIN 13 and the 6g tolerance class provides a clear, objective criterion for pass/fail decisions, which simplifies quality control and shortens inspection times without compromising traceability. Construction that supports reproducible results A compact, robust geometry and hardened material ensure stable measuring conditions and long service life. The Go‑type configuration confirms the internal thread form and lead quickly; if the ring engages freely, the thread meets the defined limit. The solid construction minimises deformation during handling so that the same nominal performance is maintained over many cycles. These attributes translate into predictable inspection results and fewer production interruptions. Calibrated and documented for audit readiness The gauge is delivered with a calibration certificate, documenting the inspection carried out prior to dispatch and enabling traceability in quality systems. The certificate supports internal audits and supplier control processes by providing a verifiable measurement history. For workshops that require documented verification steps, the inclusion of the calibration record reduces administrative effort and supports compliance with customer‑specific quality requirements. Practical use and handling in the workshop Intended as a Go gauge for right‑hand, fine‑pitch metric threads, the ring fits inspection fixtures or may be used freehand with appropriate care. The compact design eases handling during inline checks and incoming inspections, enabling quick decisions at point of control. Combining simple Go‑checks with a documented calibration routine helps link everyday inspection practice with long‑term quality assurance, making the gauge a reliable tool for production and quality teams. Contact Metav Werkzeuge today to request the Metav IndustryLine M72 × 3.0 Go ring gauge with calibration certificate and discuss the best inspection workflow for your production Technical data SKU: M315.772.8 GTIN: 4054469154473 Tariff number: 90173000 Weight: 2 kg Thread designation: M72 × 3.0 Tolerance class: 6g Standard: DIN 13 Facts Type: Go (GUT) thread ring gauge Hand: Right‑hand thread Material: Hardened gauge steel Supplied: With calibration certificate Category: Ring gauge / Thread verification Special features Intended for metric ISO fine threads Durable, wear‑resistant construction Clear pass/fail criterion for quick inspection Suitable for incoming inspection and production control Manufacturer brand: Metav IndustryLine FAQ What does the GUT marking mean for the ring gauge? The GUT marking indicates a Go (pass) ring gauge; the Metav IndustryLine M72 × 3.0 Go ring gauge confirms that an internal thread meets the defined limit when the ring engages freely. Is a calibration certificate included with delivery? Yes, the gauge is supplied with a calibration certificate that documents the inspection prior to dispatch and supports traceability in quality systems. Which standard does the ring gauge comply with? The ring gauge is manufactured to DIN 13 and is specified for tolerance class 6g, matching common metric ISO fine‑thread inspection criteria. Can this gauge be used on left‑hand threads? No, this particular ring is for right‑hand metric fine threads only; left‑hand thread checks require the corresponding left‑hand gauge. What material is the gauge made from and why is that important? The ring is made from hardened gauge steel, which provides wear resistance and dimensional stability for repeatable inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x3 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6H With Calibration Certificate - Metav IndustryLine
Benefit from the combination of hardened gauge steel, DIN 13 (6H) conformity and an included calibration certificate for reliable, repeatable thread inspection. Order the Go thread plug gauge M72 x 3.0 directly via Metav Werkzeuge or ask the consultants if further application advice is needed. Go thread plug gauge M72 x 3.0 – right‑hand, metric ISO fine thread (Metav IndustryLine) A Go thread plug gauge designed for verification of metric ISO fine threads in production and inspection environments, ensuring conformity with DIN 13 (6H) tolerances. Hardened gauge steel, DIN 13 (6H) Go gauge for M72 x 3.0 metric threads Delivered with calibration certificate Right‑hand, precision ground thread form Consistent, exact thread verification for production control A Go thread plug gauge provides a fast, objective pass/fail check for internal threads. Manufactured from hardened gauge steel, this gauge resists wear and maintains form fidelity over repeated use, which reduces rework and downtimes. The adherence to DIN 13 (6H) ensures the gauge corresponds to widely recognised tolerances for metric ISO fine threads, so results are comparable across suppliers and inspection stations. Using a dedicated Go gauge speeds up process control by eliminating subjective judgement and supports clear accept/reject decisions on the shop floor. Calibrated delivery secures traceability and audit readiness The supplied calibration certificate documents the inspection status of the gauge at delivery and supports quality records. As the gauge is delivered calibrated, traceability chains can be closed immediately — beneficial for first-article inspection and incoming goods verification. The combination of precision finish and documented calibration means measurement uncertainty is reduced, strengthening statistical process control and allowing straightforward integration into quality management systems. The right‑hand, precision‑ground thread form ensures a true representation of the mating thread condition. Practical handling and durability for workshop use Designed with workshop ergonomics and long service life in mind, the gauge’s hardened construction and precision grinding minimise surface damage to threads during routine checks. The compact size and clear designation make the tool simple to store and identify in tool sets or inspection benches. For recurring checks, a calibrated Go gauge saves time by replacing labour‑intensive functional tests, while the durable material extends the replacement interval. This makes the gauge a cost‑effective choice for maintenance departments and production lines requiring regular thread verification. For precise thread inspection and documented quality assurance, request the Metav IndustryLine Go thread plug gauge M72 x 3.0 from Metav Werkzeuge or contact the consultants for application‑specific recommendations. Technical data Article number: M315.572.8 GTIN: 4054469154091 Weight: 2 kg Thread size: M72 x 3.0 Tariff number: 90173000 Facts Tolerance standard: DIN 13, 6H Thread direction: right‑hand Gauge type: Go (GUT) Special features Material: hardened gauge steel Delivery: includes calibration certificate Application: verification of metric ISO fine threads Category: thread gauges / plug gauges FAQ What thread size does this gauge check? The Metav IndustryLine Go thread plug gauge checks M72 x 3.0 metric ISO fine threads and is manufactured to match DIN 13 (6H) tolerances. Is the gauge delivered calibrated? Yes, the gauge is supplied with a calibration certificate confirming its measured condition at delivery. What material is the gauge made from? The tool is made from hardened gauge steel, chosen for wear resistance and dimensional stability. Does this gauge indicate Go only or Go and No‑Go? This item is a Go gauge designed for functional Go checks of internal threads; No‑Go gauges are available separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x4 Gauge Ring, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Reliable, hardened gauge steel and compliance with DIN 13, 6g class ensure fast, repeatable verification of metric fine threads. Supplied with a calibration certificate for immediate traceability, the ring gauge supports production control and quality assurance. Order the Go thread ring gauge GUT M72×4 directly via Metav Werkzeuge or ask our consultants if needed. Go thread ring gauge GUT M72×4 — metric ISO fine thread verification, right-hand A Go thread ring gauge GUT M72×4 designed for quick pass/fail inspection of external metric ISO fine threads in production and inspection environments. Calibrated with certificate included Hardened gauge steel construction For metric ISO fine thread M72×4, right-hand Manufactured to DIN 13, 6g tolerance Rapid, reliable pass/fail control that keeps production moving The ring is engineered for fast verification of external threads, enabling immediate acceptance or rejection during assembly and machining. The Go gauge function verifies that major thread dimensions lie within the specified DIN 13, 6g tolerance; a successful fit confirms conformity, reducing rework and line stoppages. Using a dedicated gauge shortens inspection time compared with full metrological measurement and supports high throughput quality control. Built to last: wear resistance and dimensional stability Manufactured from hardened gauge steel, the gauge offers excellent resistance to wear and retains dimensional stability over repeated use. The hardened construction minimises profile change under typical workshop conditions, preserving the nominal form of the thread profile and extending service intervals. The robust design supports frequent handling on shop floors and in incoming inspection, lowering long‑term replacement costs and maintaining assembly reliability. Traceable calibration for documented quality control Supplied with a calibration certificate, the gauge arrives ready for documented inspection work and traceability in quality systems. The certificate documents the calibration status at delivery and enables integration into internal inspection schedules. Traceable calibration simplifies audit preparation and ensures that results obtained with the ring gauge can be reported with confidence as part of a controlled measurement process. Practical integration into workshop and inspection routines The compact ring format and right‑hand thread configuration make the gauge straightforward to use on benches and inspection stations. The M72×4 sizing and clear Go/No‑Go function keep operator instructions simple and reproducible, reducing human error during pass/fail checks. Where quick assessment is needed to verify conformity before assembly or shipping, this gauge provides an efficient, pragmatic solution that complements more detailed metrology equipment. For ordering and technical advice on the Metav IndustryLine Go gauge, contact Metav Werkzeuge for direct procurement and consulting support Technical data Article number: M315.772.9 GTIN: 4054469155203 Customs tariff no.: 90173000 Facts Size: M72 × 4 Weight: 2 kg Tolerance class: 6g (per DIN 13) Special features Material: hardened gauge steel Right‑hand thread Go gauge (pass ring) Supplied with calibration certificate FAQ What does this gauge check? The Go thread ring gauge GUT M72×4 checks external metric ISO fine threads for conformity to the DIN 13, 6g tolerance; a pass indicates the thread meets the required major and pitch dimensions. Is the gauge supplied ready for use in quality records? Yes, the ring is delivered with a calibration certificate that documents its calibration status for immediate use in inspection and quality documentation. Can the gauge be used on both right‑ and left‑hand threads? This specific gauge is manufactured for right‑hand threads only; left‑hand verification requires the corresponding left‑hand ring. How should the gauge be handled to preserve accuracy? Handle the gauge with care, keep it clean and dry, and store it in a protective location to minimise wear; periodic recalibration is recommended according to internal quality procedures. Which applications are typical for this ring gauge? Typical uses include in‑process thread checks, final inspection before assembly, and incoming inspection of externally threaded components manufactured to M72×4 specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com