Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
0.39mm Test Pin, Single, ±0.002mm, Pin Length 40mm, Total Length 57mm - Metav IndustryLine
High-precision test pin in a compact form: ±0.002 mm tolerance and special steel construction combine for dependable end‑measure inspections; compact overall length keeps handling and storage straightforward. Order the M323.039 directly via Metav Werkzeuge or consult the Metav advisors for application support. Test pin M323.039 — single workshop gauge pin, 0.39 mm diameter, ±0.002 mm accuracy (Metav IndustryLine) The Test pin M323.039 is a single‑piece precision gauge pin designed for end‑measure checks and fit verification in workshop and production environments, offering a compact overall length suited to confined fixtures. 0.39 mm diameter, ±0.002 mm tolerance Workshop‑grade special steel construction Delivered in a protective transport case Single gauge pin for end‑measure applications Reliable dimensional control for small bores and fittings The core advantage of this gauge pin is its ±0.002 mm tolerance, which provides a measurable step up from standard workshop probes and ensures repeatable results when checking end‑measures and final dimensions. Manufactured from special steel, the pin resists deformation under normal handling and maintains geometric stability in fixtures. For production lines that rely on quick go/no‑go decisions, the fine tolerance reduces uncertainty and lowers the risk of rework by making acceptance criteria verifiable at the bench or on the shop floor. Robust design that suits daily workshop use The compact form—pin length 40 mm, total length 57 mm—combines access to tight spaces with a handle length that improves grip and control during manual checks. The lightweight construction (approximately 0.003 kg) minimises operator fatigue when multiple measurements are required, while the workshop execution ensures the part withstands the rigours of regular use. Supplied in a protective transport case, the pin arrives ready for safe storage and secure transport between workstations without additional packaging effort. Practical applications and process integration Intended for end‑measure and fit checks, this single gauge pin is useful in small bore verification, assembly control and final inspection routines where micrometre‑level accuracy is required. The pin supports quick tactile measurement sequences and is suitable for integration into fixture checks or handheld verification workflows triggered by end‑of‑line sampling. Using a dedicated gauge pin reduces setup time compared with adjustable tooling and streamlines pass/fail decisions in repetitive inspection tasks. Why quality and supply reliability matter Sourcing this precision component from Metav IndustryLine combines technical suitability with dependable delivery from a European quality hub. The combination of controlled manufacturing, clearly stated dimensional data and protective packaging reduces handling risk and supports consistent quality outcomes across batches. For workshops seeking cost‑effective precision components, this pin offers a direct route to improved measurement certainty without complex calibration procedures. For precise end‑measure checks with reliable delivery, request the M323.039 from Metav Werkzeuge and consult our Emmerich team for application advice and ordering information. Technical Data Article number: M323.039 GTIN: 4061905054259 Manufacturer: Metav IndustryLine Facts Diameter: 0.39 mm Tolerance: ±0.002 mm Pin length: 40 mm Total length: 57 mm Weight: 0.003 kg Special features Workshop execution Delivered in protective transport case (plastic or wood) Material: special steel Single test pin FAQ What is the exact tolerance of this gauge pin? The M323.039 gauge pin is specified with a tolerance of ±0.002 mm to support fine end‑measure inspections. Is the pin suitable for measuring small bores and fits? Yes, the 0.39 mm diameter and precise tolerance make the gauge pin suitable for small‑bore verification and fit checks in assembly and inspection workflows. How is the pin delivered and protected during transport? The M323.039 is supplied in a protective transport case (plastic or wooden option) to ensure safe handling and storage during shipping and between workstations. What material is used for this test pin? The pin is manufactured from special steel, selected for dimensional stability and workshop durability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.3mm Gauge Pin, ±0.002mm Accuracy, 40mm Probe Length, 57mm Overall, Workshop Version - Metav IndustryLine
The combination of high repeatability (±0.002 mm), an ultra‑fine Ø 0.30 mm diameter and a compact overall length ensures dependable end‑dimension checks with minimal setup time; this single test pin supports consistent inspection workflows and long‑term wear resistance. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.030 – single gauge pin, Ø 0.30 mm, ±0.002 mm (Metav IndustryLine) A Test Pin M323.030 designed for precise end‑dimension inspection and plug‑gauge tasks in workshop and inspection environments. Diameter 0.30 mm with ±0.002 mm accuracy Pin length 40 mm, overall length 57 mm Manufactured from special steel for durability Suitable for precise end‑dimension inspection Ensure dimensional control with submicron confidence This single test pin delivers repeatable measurements thanks to its tight tolerance of ±0.002 mm. The extremely fine Ø 0.30 mm diameter is intended for accurate verification of end dimensions and small bores where even minor deviations matter. In practice, the narrow tolerance reduces measurement uncertainty and lowers the risk of false rejects or undetected faults, enabling quality teams to maintain a stable production yield while shortening inspection cycles. Reliable form and handling for daily workshop use Constructed from special steel, the pin balances surface hardness and corrosion resistance for prolonged service life in a workshop setting. The pin length 40 mm combined with an overall length 57 mm gives sufficient gripping area for fixtures and holders while keeping the exposed measurement portion stable. The lightweight construction (approx. 0.003 kg) minimises tool‑holder load and contributes to faster handling during repetitive gauge checks, which is especially beneficial in serial inspection tasks. Minimised setup time and straightforward integration Designed as a single, ready‑to‑use gauge pin, this item fits into common inspection jigs and plug‑gauge holders without modification. The compact geometry simplifies fixturing and allows quick swap‑outs in measurement rigs, supporting lean inspection processes. Traceability is supported by the visible SKU and GTIN on the product record, helping to maintain orderly inventory and compliance in controlled workshop environments. Precision where end measures define quality Small components and critical sections often demand sub‑millimetre control; the test pin’s Ø 0.30 mm and ±0.002 mm specification mean that dimensional decisions can be taken on solid data rather than estimates. Reduced measurement variability directly impacts downstream quality assurance: fewer reworks, predictable tolerances and clearer go/no‑go decisions for acceptance sampling. Practical advantages for metrology and production teams As a single‑piece gauge solution, the pin suits calibration programmes and routine checks in assembly and finishing operations. The robust material choice and measurable geometry support repeat calibrations and consistent results across batches. Delivered as a single unit and suitable for integration into existing inspection flows, the component simplifies logistics for quality engineers looking to standardise small‑bore verification procedures. Request a specification sheet or procurement advice from Metav Werkzeuge for the M323.030 single test pin—Metav’s Emmerich team can advise on delivery options and application fitment via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.030 GTIN: 4061905053979 Brand: Metav IndustryLine Facts Diameter: 0.30 mm Tolerance/Accuracy: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Material: special steel Type: single test pin Intended use: end‑dimension inspection Category: gauge pin / test pin FAQ What size and tolerance does this gauge pin have? The M323.030 gauge pin has a diameter of 0.30 mm and a tolerance of ±0.002 mm, suitable for tight end‑dimension checks. Is the pin suitable for frequent workshop use? Yes, the pin is manufactured from special steel and designed as a workshop version to resist routine handling and maintain form accuracy in repeated inspections. Can the M323.030 be used with standard plug‑gauge holders? The single test pin is compatible with common inspection fixtures and plug‑gauge holders; its overall length of 57 mm provides sufficient gripping length for typical mounts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.4 mm Test Pin, Single, ±0.002 mm Tolerance, 40 mm Probe Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance, compact geometry and workshop‑grade steel for reliable end‑dimension checks; the pin’s 0.40 mm diameter with ±0.002 mm accuracy supports reproducible acceptance tests and inline checks. Order the M323.040 precision pin directly via Metav Werkzeuge or consult the technical team for application advice. M323.040 — Precision gauge pin (0.40 mm, ±0.002 mm) by Metav IndustryLine The M323.040 is a single‑piece precision gauge pin designed for exact end‑dimension verification and fit checks in workshop and production environments. Precision diameter 0.40 mm ±0.002 mm Pin length 40 mm, overall length 57 mm Special steel construction, workshop variant Accurate end‑dimension checks with micron‑level confidence The compact geometry of this precision pin is engineered for repeatable end‑dimension verification. With a nominal diameter of 0.40 mm and an accuracy of ±0.002 mm, the component enables reliable pass/fail checks for small bores, pin fits and final inspection steps. The tight tolerance reduces uncertainty in go/no‑go decisions and supports process control, making it suitable for quality control stations where consistency and traceability matter. Laboratory metaphors aside, this tool converts tight specifications into manageable routine checks. Robust workshop design for routine handling and fixture use Constructed from special steel, the pin combines surface integrity with resilience against routine handling in a workshop setting. The 40 mm pin length and 57 mm overall length balance reach and stability: long enough to engage recessed features while remaining stiff under typical probing forces. The single‑piece supply suits integration into jigs, check fixtures and comparator setups; the compact mass (approx. 0.003 kg) minimises disturbance when used in delicate assemblies. This workshop execution reduces wear in standard production use while keeping handling straightforward for operators. Seamless fit into measurement routines and quality flows The precision pin is intended as a practical tool in measurement chains: it performs end‑measurements and fit checks quickly, thereby shortening inspection cycles and supporting throughput. Because the pin is dimensionally stable within the specified tolerance, recorded results can be used for statistical process control or short‑term decision making without frequent recalibration. For specialised applications, the Metav IndustryLine designation signals compatibility with common metrology accessories and fixtures, ensuring predictable behaviour in mixed inspection benches. For secure procurement and application support, request the Metav IndustryLine M323.040 precision pin from Metav Werkzeuge — technical advice and ordering assistance are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.040 GTIN: 4061905054266 Manufacturer: Metav IndustryLine Facts Diameter: 0.40 mm Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg ECLASS: 21170231 Special features Material: Special steel Workshop execution Single pin supply Application: end‑dimension checks and fit testing FAQ What applications is this precision pin suited for? The M323.040 precision gauge pin is suitable for end‑dimension verification, fit checks and small‑bore inspection in workshop and production environments. How precise is the gauge pin and what does that mean in practice? With a nominal diameter of 0.40 mm and a tolerance of ±0.002 mm, the pin delivers micron‑level repeatability for go/no‑go checks and short inspection runs using common metrology fixtures. Can the pin be integrated into fixtures or jigs? Yes. The special steel construction and the 40 mm pin length allow secure mounting in fixtures and use with comparators or inspection benches for reproducible checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.41mm Test Pin Single ±0.002mm, Pin Length 40mm, Total Length 57mm Workshop Version - Metav IndustryLine
Take advantage of precision, consistent tolerance and compact handling for reliable end‑measurement and alignment tasks; the small diameter and tight tolerance reduce rework and speed inspection routines. Order the item directly via Metav Werkzeuge or ask the consultants for application advice. M323.041 Gauge Pin – 0.41 mm, ±0.002 mm (Metav IndustryLine) The M323.041 is a single 0.41 mm precision gauge pin intended for end‑measurement and fine alignment checks in metrology and workshop inspection tasks Workshop-grade precision plug gauge ±0.002 mm Diameter 0.41 mm, special steel construction Pin length 40 mm, overall length 57 mm Supplied in protective case for transport Small size, big impact on inspection efficiency A compact precision pin with a nominal diameter of 0.41 mm and a narrow tolerance of ±0.002 mm enables fast, repeatable checks of small bores, pin fits and reference gauges. The reduced handling time for very small features translates into shorter inspection cycles and fewer stoppages on the production line. The use of special steel ensures mechanical stability during repeated insertions, so measurement routines remain dependable without frequent replacements. Robust workshop execution for everyday use Designed as a workshop‑grade test pin, the tool withstands routine use in assembly and quality control environments. The 40 mm measuring shank and 57 mm overall length provide sufficient engagement for most small‑part checks while keeping handling straightforward. Supplied in a protective case, the gauge pin stays secure during storage and transport, reducing the risk of damage and preserving its tight tolerance for extended service life. Practical benefits and application scenarios This precision pin is suited for end‑measure checks, alignment of fixtures and control of assembly fits where sub‑millimetre accuracy matters. The narrow diameter makes it ideal for micro‑components, electrical connectors and small bores in precision engineering. By integrating a reliable gauge pin into inspection routines, process engineers achieve clearer go/no‑go decisions and reduce the likelihood of concealed defects affecting downstream assembly. For tailored advice on integrating the Metav IndustryLine M323.041 into inspection workflows or to request a procurement quote, contact Metav Werkzeuge in Emmerich for specialist support and next‑day dispatch options. Technical Data Article number: M323.041 SKU: M323.041 GTIN: 4061905054273 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 0,41 mm, +/- 0.002 mm Stiftlänge 40 mm, Gesamtlänge 57 mm Facts Diameter: 0.41 mm Accuracy / Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Material: Special steel Version: Workshop execution Packaging: Supplied in case for transport Intended use: End‑measurement and alignment tasks FAQ What tolerance does the M323.041 gauge pin offer? The M323.041 gauge pin from Metav IndustryLine is specified at ±0.002 mm, providing tight repeatability for micro‑inspection tasks. Which applications suit this small‑diameter pin? This precision pin is intended for end‑measurement, small bore checks and fixture alignment in precision engineering and electronics assembly. What material is used for the gauge pin and how is it delivered? The pin is made from special steel and is supplied in a protective case to prevent damage during transport and storage. What are the physical dimensions of the pin? Nominal diameter 0.41 mm, pin (measuring) length 40 mm, overall length 57 mm; weight approximately 0.003 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.42 mm Gauge Pin Single ±0.002 mm Tolerance 40 mm Stem Length 57 mm Overall, Workshop Version - Metav IndustryLine
Take advantage of a combination of pinpoint accuracy and compact dimensions for reliable end‑of‑line checks. The small‑diameter gauge pin offers 0.42 mm nominal size with a tight ±0.002 mm tolerance, supplied individually for easy replacement or fixture use — order directly via Metav Werkzeuge or consult the team for specification advice. Gauge pin M323.042 – precision inspection pin, 0.42 mm, ±0.002 mm (Metav IndustryLine) A gauge pin M323.042 designed for precision dimensional checks and fixture verification in inspection benches and workshop environments. 0.42 mm diameter, tolerance ±0.002 mm Special steel construction for wear resistance Pin length 40 mm, total length 57 mm Workshop version for routine inspection tasks High-precision measurement that improves process reliability Engineered for tight dimensional control, the 0.42 mm diameter pin with a ±0.002 mm specification delivers reproducible contact geometry for go/no‑go checks and repeat measurements. The fine tolerance reduces measurement scatter and increases confidence in sorting and inspection steps. Where small bores or pin gauges are used as reference elements in fixtures, the consistent shaft diameter and cylindricity minimise positional error and help maintain traceability across repeated sampling. Durable workshop design for daily inspection cycles Built in a workshop version with special steel, the probe resists surface wear and withstands routine handling in production areas. The pin length 40 mm combined with a total length 57 mm provides sufficient engagement depth for many common verification tasks while keeping the accessible shank length for secure clamping or manual handling. The low mass (approx. 0.003 kg) reduces the risk of impact damage during use and simplifies insertion in delicate assemblies, preserving accuracy over extended service intervals. Practical integration and quality-control benefits Supplied individually, the component is straightforward to replace within modular fixtures or as a single spare element in quality departments. The compact geometry makes it suitable for close‑pitch layouts and small‑bore inspection, while the clearly defined nominal size supports catalogue management and inventory control under SKU M323.042. Using standardised pins with documented tolerances streamlines inspection protocols and supports consistent decision thresholds in incoming inspection, in‑process checks and final acceptance routines. For workshop environments that demand compact precision, consider the Metav IndustryLine gauge pin M323.042 — contact Metav Werkzeuge for ordering and specification support at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M323.042 GTIN: 4061905054280 Brand: Metav IndustryLine Material: Special steel Weight: 0.003 kg Facts Nominal diameter: 0.42 mm Tolerance: ±0.002 mm Pin length: 40 mm Total length: 57 mm Special features Workshop execution Supplied individually Label: Prüfstift, single 0.42 mm SKU: M323.042 FAQ What measurement accuracy can be expected from this gauge pin? The gauge pin is specified at ±0.002 mm tolerance; this precision supports repeatable go/no‑go checks and fine‑tolerance inspection tasks. Is the pin suitable for use in inspection fixtures and jigs? Yes, the workshop execution and the pin length 40 mm with a total length 57 mm make it suitable for fixture mounting and routine verification applications. What material is the probe made from and how does that affect wear? The probe is made from special steel, chosen for wear resistance in workshop environments to preserve surface integrity and dimensional stability. Is the component supplied as a set or individually? The item is supplied individually; replacement or spare‑part management is therefore simplified for fixture maintenance. How is this part identified for procurement and stock control? The part is listed under SKU M323.042 and GTIN 4061905054280 for clear identification in procurement and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.43mm Test Pin Single ±0.002mm Stem Length 40mm Total Length 57mm Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometre-level accuracy, compact geometry and a robust workshop design for reliable end‑measurements and fixture checks. The single Test pin M323.043 offers a 0.43 mm diameter with a tolerance of ±0.002 mm for consistent repeatability in production control. Order the Test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.043 — single gauge pin, Ø 0.43 mm, ±0.002 mm (Metav IndustryLine) A Test pin M323.043 designed for high‑precision end‑measurements and fixture verification in workshop and inspection environments. Test pin M323.043, Ø 0.43 mm, ±0.002 mm accuracy Pin length 40 mm, overall length 57 mm Made from special steel, workshop design Supplied individually for fixture and end‑measurements Precision where small tolerances matter The gauge is made for applications that demand high repeatability: with a nominal diameter of Ø 0.43 mm and a specified tolerance of ±0.002 mm (equivalent to 2 µm), it serves as a reliable reference for fine end‑measurements and pin gauges. Such tolerances are critical when detecting minute deviations during assembly or when checking end faces and bores. The narrow diameter and tight tolerance minimise measurement uncertainty, enabling traceable checks that support quality control procedures. Robust workshop design for routine inspection Constructed in special steel and specified as a workshop version, this single probe is balanced between finesse and durability. The pin length 40 mm combined with an overall length 57 mm provides sufficient engagement for many fixture and end‑measurement tasks while remaining compact for handheld use or insertion into gauge holders. The material choice offers wear resistance under regular inspection cycles, meaning fewer replacements and stable dimensional behaviour over time. Practical benefits for production and tooling Delivered as a single item, the probe is ideal for targeted checks on gauges, fixtures and end‑masses where space is limited. Its small mass contributes negligible loading on delicate assemblies, while the precise tolerance supports go/no‑go assessments and comparative measurements against master gauges. Where process stability is required, this gauge pin simplifies integration into existing measurement routines and assists in maintaining consistent production quality. For reliably precise end‑measurements, request availability and expert advice on the Metav IndustryLine Test pin M323.043 from Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: M323.043 GTIN: 4061905054297 Material: special steel Designation: single test pin Facts Diameter: 0.43 mm Tolerance / Accuracy: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Workshop version Supplied individually Intended for end‑measurements and fixture checks FAQ What is the diameter of the Test pin M323.043? The Test pin M323.043 has a nominal diameter of 0.43 mm. What accuracy does the Test pin M323.043 offer? The Test pin M323.043 is specified with a tolerance of ±0.002 mm (2 µm). What material is the Test pin M323.043 made from? The Test pin M323.043 is manufactured from special steel and specified as a workshop design. What are the pin and overall lengths of the Test pin M323.043? The Test pin M323.043 has a pin length of 40 mm and an overall length of 57 mm. For which applications is the Test pin M323.043 suitable? The Test pin M323.043 is suitable for end‑measurements, fixture verification and precision checks in workshop and inspection settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.44mm Gauge Pin Single, ±0.002mm, Pin Length 40mm, Total Length 57mm, Workshop Version - Metav IndustryLine
Benefit from extremely fine tolerances and a compact form that suits precision end‑measure tasks; the pin’s 0.44 mm diameter with ±0.002 mm accuracy and robust special steel construction support reliable inspection routines. Order the M323.044 directly via Metav Werkzeuge or contact our consultants for technical advice. M323.044 Test Pin — 0.44 mm, ±0.002 mm workshop grade The M323.044 is a single precision test pin for fine end‑measurements and gauging applications, designed as a workshop‑grade inspection tool for repeatable checks. Precision tolerance ±0.002 mm Diameter 0.44 mm for fine measurements Shaft length 40 mm, overall 57 mm Special steel for workshop durability Accuracy that reduces rework and inspection time The compact inspection probe delivers a ±0.002 mm tolerance, making it suitable for tasks where small deviations matter. With a 0.44 mm diameter and a slim profile, the pin excels in end‑measure applications and confined gauge fixtures, enabling faster go/no‑go decisions. The high repeatability reduces the need for follow‑up checks and supports tighter process control in routine production environments. Robust format for frequent shop‑floor use Constructed from special steel and specified as a workshop execution, the component balances resilience with handling convenience. The 40 mm shaft and 57 mm overall length provide enough reach for common fixture arrangements while remaining rigid for accurate contact. The design minimises deformation under light probing force, so surface interactions stay consistent and the inspection result remains trustworthy across cycles. Simple integration into existing inspection setups The single‑piece layout of this measuring pin simplifies replacement and calibration routines. Traceability is supported via the SKU and GTIN, and the compact form factor fits standard pin holders and gauge blocks without modification. For metrology tasks that demand concise, verifiable measurements, this inspection pin helps standardise checks and shortens setup times on the shop floor. For workshop‑grade precision with ±0.002 mm accuracy, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.044 GTIN: 4061905054303 Description: Single test pin, 0.44 mm, ±0.002 mm, shaft length 40 mm, overall length 57 mm Facts Diameter: 0.44 mm Tolerance: ±0.002 mm Shaft length: 40 mm Overall length: 57 mm Weight: 0.003 kg Measurement range max: 0.44 mm Special features Material: special steel Workshop‑grade execution Individual delivery Category: Measuring pins eClass: 21170231 FAQ Is this pin suitable for end‑measurements in small bores? The M323.044 test pin is intended for fine end‑measurements and fits small bores and precision fixtures thanks to its 0.44 mm diameter and tight tolerance. Can the pin be used in standard pin holders and gauge blocks? Yes, the inspection pin from Metav IndustryLine is designed for straightforward integration into common holders and gauging setups without modification. What material is the pin made from and how does that affect wear? Made from special steel, the M323.044 offers good wear resistance for workshop use while maintaining the contact fidelity required for repeated measurements. How precise are the measurements with this test pin? The measuring pin provides a tolerance of ±0.002 mm, supporting repeatable checks and reducing measurement uncertainty in routine inspection tasks. Is traceability provided for procurement and inventory? The product is supplied with a SKU (M323.044) and GTIN (4061905054303) for clear traceability and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.45 mm Test Pin Single ±0.002 mm Length 40 mm Total Length 57 mm Workshop Version - Metav IndustryLine
Taking advantage of precision (±0.002 mm) and a compact 0.45 mm diameter, this workshop-grade gauge pin delivers reliable results for small-bore checks and repeatable end-dimension verification; supplied in a protective transport case for safe handling. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. M323.045 Gauge Pin (0.45 mm) – Precision ±0.002 mm, Special Steel by Metav IndustryLine The M323.045 gauge pin is a workshop-grade precision pin for checking small bores and end dimensions in fine mechanical assemblies 0.45 mm diameter, tolerance ±0.002 mm Workshop version, robust special steel Pin length 40 mm, overall 57 mm Supplied in protective transport case Precision for the smallest bores and tight tolerances The compact design classifies this instrument in the Micro range and is optimised for high-precision checks on very small diameters. With a nominal diameter of 0.45 mm and a declared tolerance of ±0.002 mm, the pin provides a verifiable reference for fit and clearance measurements where micrometre-level control matters. Such accuracy reduces uncertainty in production checks and quality control, enabling faster acceptance decisions and fewer reworks. The tight tolerance is especially beneficial for fine mechanical parts, miniature bearings and precision connectors where repeatable dimensional control is essential. Robust workshop construction for everyday checking Designed as a workshop version, the pin is manufactured from special steel to withstand repeated use while maintaining dimensional stability. The pin length of 40 mm and an overall length of 57 mm give sufficient engagement depth for reliable insertion into bores without excessive handling, and the low mass supports quick manipulation during sampling. The hardened surface and material choice reduce wear and preserve the measuring edge, so the tool remains dependable through routine inspection cycles. Supplied in a protective transport case, the pin arrives ready for secure storage and safe transport between bench and machine. Practical handling, traceability and industrial use Delivered as a single precision gauge pin, the item is identified as M323.045 (GTIN 4061905054310) for easy inventory and traceability. The compact profile makes the pin suitable for insertion checks, end‑dimension validation and use in small jig setups where accessibility is limited. Its measurement capability complements calipers and micrometres by providing a fixed-diameter reference that is straightforward to interpret and less sensitive to operator technique. For complex applications or integration into existing inspection routines, Metav’s technical consultants can advise on suitable workflows and matching gauge sets to streamline quality control. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and to secure the M323.045 gauge pin with protective transport case through Metav Werkzeuge’s ordering channels Technical data Article number: M323.045 GTIN: 4061905054310 Brand: Metav IndustryLine Label: Gauge pin, single, 0.45 mm, ±0.002 mm; pin length 40 mm; overall length 57 mm Weight: 0.003 kg Numbers / Core technical data Nominal diameter: 0.45 mm Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features / Materials Material: special steel Workshop version (robust design) Supplied in protective transport case Single-piece delivery (individual gauge pin) FAQ What measurement tasks is this gauge pin best suited for? The M323.045 gauge pin from Metav IndustryLine is designed for checking very small bores, end dimensions and fit verification in fine mechanical assemblies where a 0.45 mm reference is required. Does the gauge pin come with traceability information? The M323.045 is supplied as a single, identified item (GTIN 4061905054310) for inventory control and traceability in inspection workflows. What material is used for the pin and why does it matter? The pin is made from special steel to provide wear resistance and dimensional stability during repetitive checks, ensuring that the gauge retains its specified tolerance of ±0.002 mm. Can the pin be used in production sampling and jig checks? Yes, the compact dimensions and overall length of 57 mm make the pin suitable for production sampling, jig checks and accessibility-critical inspections where a rigid, fixed-diameter reference is needed. Is the M323.045 supplied ready for safe transport and storage? Yes, the gauge pin is supplied in a protective transport case to prevent damage during handling and storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.45–1.5 mm Nozzle Gauge Set 20 Pieces, Steel Pins, 0.005 mm Accuracy - Metav IndustryLine
Take advantage of precise orifice verification and a compact, lightweight format to keep inspections fast and repeatable; the combination of ±0.005 mm accuracy and a continuous size range from 0.45–1.50 mm supports consistent quality control across small-bore components. Order the set directly via Metav Werkzeuge or contact the consultants for application advice. Nozzle gauge set M318.025 — 0.45–1.50 mm precision gauge pins by Metav IndustryLine The nozzle gauge set M318.025 is a compact inspection kit intended for accurate checking of small orifice diameters in maintenance workshops and production lines, primarily for fuel injectors, spray nozzles and small-bore components. Precision tolerance 0.005 mm Range 0.45–1.50 mm in 20 increments Lightweight set, total weight 0.02 kg Consistent orifice verification for production control The set delivers repeatable checking of nozzle diameters across a continuous size range, reducing uncertainty in small-bore inspections. With an indicated accuracy of ±0.005 mm, the pins allow clear pass/fail decisions where tight tolerances matter; this level of precision supports root-cause analysis and lowers scrap rates when used as part of incoming inspection or routine maintenance. The labelled sizes facilitate quick documentation of measurement results and contribute to process reliability in serial production. Designed for workshop convenience and fast inspection cycles A compact format and low total mass make the kit easy to handle at the bench or on mobile service trolleys, shortening inspection times during maintenance stops. The 20 incremental sizes from 0.45 to 1.50 mm permit fine gradation without the need for micrometres or complex measuring fixtures, so visual and tactile verification are completed more efficiently. The set structure helps teams implement standardised checks and improves throughput while maintaining measurement confidence. Supports traceability and quality workflows The format is suitable for integration into routine quality procedures and inspection logs; the individual sizes are listed for straightforward recording. As part of the Metav IndustryLine portfolio, this set aligns with a supplier approach that emphasises accessible precision for workshops and industry alike. The measurement pins serve as a practical tool for maintenance engineers, service technicians and quality inspectors who require a reliable, fast means to verify nozzle and small-bore dimensions without over‑engineering the inspection step. Contact Metav Werkzeuge to discuss how the Metav IndustryLine nozzle gauge set M318.025 can be integrated into existing inspection routines and arranged for prompt delivery from Emmerich Technical data Article number: M318.025 GTIN: 4054469127743 Tariff number: 90173000 Manufacturer: Metav IndustryLine Set: yes Facts Accuracy: 0.005 mm Size range: 0.45–1.50 mm Number of sizes: 20 Weight: 0.02 kg Pin length: 5 mm Special features Included sizes: 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00, 1.05, 1.10, 1.15, 1.20, 1.25, 1.30, 1.40, 1.50 mm Category: Measuring pins; Gauges Compact inspection kit for small-bore orifices FAQ How is the set intended to be used in inspection routines? The nozzle gauge set M318.025 is used to verify orifice diameters by matching the appropriate gauge pin to the bore; a full fit indicates conformity to the nominal size, while a noticeable clearance indicates oversize. What precision can be expected from these gauge pins? The pins are specified with an accuracy of ±0.005 mm, which supports repeatable go/no-go style checks and helps to reduce variations in small-bore inspections. Is this set suitable for injector maintenance and similar tasks? Yes, the M318.025 nozzle gauge set by Metav IndustryLine is designed for small-bore checks typical of injector maintenance, spray-nozzle inspection and other applications requiring fine diameter verification. Does the product come as a complete set, and what is the SKU? The item is supplied as a complete set of 20 sizes and is listed under SKU M318.025 for ordering and inventory purposes. How should inspection results be recorded when using this kit? Record the nominal size tested and the pass/fail result for each pin; the clearly defined increments in the set simplify documentation and trend analysis in quality logs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.46mm Test Probe, Single, ±0.002mm Accuracy, 40mm Pin Length, Workshop Version, In Case - Metav IndustryLine
Take advantage of ±0.002 mm accuracy and a 0.46 mm diameter to secure repeatable end‑measurements and reliable gauging in workshop environments; order the matching test pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.046 Test Pin – Gauge Pin, 0.46 mm, ±0.002 mm (Metav IndustryLine) A M323.046 gauge pin designed for precise end‑measurements and fine gauging tasks in workshop metrology High precision ±0.002 mm tolerance Diameter 0.46 mm for fine gauging Made from special steel for durability Workshop version with 57 mm overall length Consistent micro‑precision that reduces rework The narrow 0.46 mm diameter combined with a tight ±0.002 mm tolerance delivers a level of repeatability suited to fine inspection tasks where marginal deviations matter. This degree of control reduces downstream rework by catching dimensional drift early in the process, and supports routine comparative checks and go/no‑go verification of finished bores or pins. The specification is aligned with precision gauging practices and allows straightforward integration into measurement sequences where narrow clearances are inspected. Robust construction for daily workshop use Manufactured from special steel, the pin is engineered to withstand the knocks and handling typical of a busy workshop while retaining its measurement integrity. The 40 mm pin length and 57 mm overall length provide stable insertion depth and a convenient grip length for manual handling or use with simple clamping fixtures. Small mass (about 0.003 kg) contributes to easy positioning in dedicated jigs and reduces the risk of accidental deflection during spot checks, making the component a pragmatic choice for production and maintenance teams. Compact geometry for narrow bores and end‑measurement tasks The compact, single‑piece design suits narrow bores and precise end‑measurements where access is limited. The slim geometry ensures compatibility with tight tolerances and enables reliable probing of recessed features. Where visual control is required, the clear, rigid shaft gives immediate tactile feedback during insertion, supporting consistent contact and more reproducible results than improvised probes or improvised tools. Traceability and straightforward workshop logistics The component is supplied as an individual test pin with a GTIN for inventory control and traceability, simplifying stock keeping and batch identification. The simple specification—diameter, pin and overall length, material and tolerance—makes it straightforward to document in inspection plans and to assign to specific gauge sets or inspection points. For procurement and application planning, Metav’s product filtration in Emmerich offers centralised availability and documented sourcing for quality‑conscious operations. Contact Metav Werkzeuge for tailored advice on integrating the M323.046 gauge pin into inspection routines or to request a supply proposal from the Emmerich stock point. Technical data Article number: M323.046 GTIN: 4061905054327 Label: Test pin, single, 0.46 mm, ±0.002 mm, pin length 40 mm, overall length 57 mm Category: Gauge pins Facts Diameter: 0.46 mm Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Material: special steel Workshop version Single test pin Application: end measurements FAQ What level of accuracy does this test pin offer? The M323.046 test pin provides a ±0.002 mm tolerance, making it suitable for fine gauging and repeatable end‑measurement tasks in a workshop environment. Which materials is the pin made from and how durable is it? The pin is made from special steel, selected for everyday workshop durability while preserving dimensional stability for routine checks. Is the M323.046 suitable for narrow bore inspections? Yes, the 0.46 mm diameter and compact geometry make the M323.046 gauge pin well suited to narrow bores and recessed end‑measurements. Can the pin be used in dedicated gauge holders or jigs? The single test pin format of the M323.046 allows simple incorporation into custom jigs or holders used for repeat inspections and comparative gauging. How is the component identified for inventory and traceability? The M323.046 test pin is issued with a GTIN (4061905054327) to support inventory control and traceability in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.47mm Test Pin Single, ±0.002mm Accuracy, 40mm Probe Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of micro‑accuracy, durable special steel construction and compact geometry for reliable end‑measurements; order the component directly via Metav Werkzeuge or consult the experts for application guidance. Gauge pin M323.047 — single precision test pin, Ø 0.47 mm, tolerance ±0.002 mm (Metav IndustryLine) The Gauge pin M323.047 is a single precision test pin designed for high‑accuracy end‑measurements and plug checking in workshop inspection and small‑part metrology. Diameter 0.47 mm, tolerance ±0.002 mm Pin length 40 mm, overall length 57 mm Special steel construction Workshop version, single pin supply Micro‑accuracy for decisive inspection results The compact design delivers measurable benefits where very small diameters matter: with a nominal diameter of 0.47 mm and a tolerance of ±0.002 mm, the pin provides reproducible reference points for fine inspection tasks. The tight tolerance reduces uncertainty in go/no‑go checks and enhances process control when verifying bore finishes, small bores or end dimensions. The geometry minimises eccentricity and, in practical applications, supports consistent contact with mating features for repeatable results. Material and mechanical integrity for workshop use Constructed from special steel, the pin withstands regular handling and offers stable surface hardness for prolonged service life in inspection routines. The pin length 40 mm and overall length 57 mm create a secure seating in common holders and inspection fixtures while keeping unwanted deflection to a minimum. The workshop execution is tailored to routine use: robust enough for daily inspection tasks yet compact for inclusion in bench kits or modular gauge sets. Practical application and compatibility in quality workflows The single‑piece design is intended for precise end‑measurements and small‑bore checks in toolrooms, production control and component verification. As a precision reference element, the component integrates directly into measuring assemblies or manual test procedures and is suitable for inclusion in gauge sets where individual pin replacement or specific diameters are required. Traceable dimensions and close tolerances support statistical process control and reduce the incidence of false rejects in serial inspections. Procurement and inventory advantages for the technical buyer Sourcing from the Metav IndustryLine provides both product consistency and logistical clarity for procurement teams. The compact form factor eases storage and logistics, while the clear specification — Ø 0.47 mm, ±0.002 mm, M323.047 — simplifies part selection for defined inspection tasks. Specification clarity shortens approval cycles and reduces the effort of matching precision pins to inspection jigs and plug gauges, supporting reliable production throughput. Contact Metav Werkzeuge for tailored inspection components and request the Metav IndustryLine M323.047 for precise end‑measurement applications; Metav Werkzeuge will advise on fitment and availability. Technical Data SKU: M323.047 GTIN: 4061905054334 Brand: Metav IndustryLine Numbers / Core Technical Data Diameter: 0.47 mm Tolerance: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Single pin supply EClass: 21170231 FAQ What material is the pin made from? The gauge pin M323.047 is manufactured from special steel, selected for mechanical stability and wear resistance in routine inspection use. What are the exact dimensions and tolerance of the pin? The test pin has a nominal diameter of 0.47 mm, a pin length of 40 mm, overall length 57 mm and a tolerance of ±0.002 mm. For which inspection tasks is this pin suitable? This precision pin is intended for end‑measurements, small bore verification and plug‑gauge tasks in toolrooms and quality control stations. Is the item supplied individually or as part of a set? The product is supplied as a single precision pin under the designation M323.047. How does this pin support process control in production? The close tolerance and reproducible geometry enable consistent reference measurements, helping to reduce measurement variability and improve inspection reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.48 mm Test Pin Single, ±0.002 mm, 40 mm Pin Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.002 mm accuracy, a 0.48 mm diameter and a workshop‑grade build for reliable end‑measure checks and repeatable gauging operations; the test pin is supplied in a protective transport box for secure handling. Order the M323.048 directly via Metav Werkzeuge or consult the Metav specialists if additional advice is required. M323.048 — Workshop test pin, 0.48 mm diameter, ±0.002 mm accuracy (Metav IndustryLine) M323.048 is a workshop‑grade test pin designed for precise end‑measure checks and fine‑feature gauging in production and setup environments Workshop‑grade design for heavy use Diameter 0.48 mm with ±0.002 mm accuracy Made from special steel for wear resistance Supplied in protective transport box Precision that reduces rework and speeds inspection The compact probe offers ±0.002 mm tolerance on a 0.48 mm shaft, providing the accuracy required for tight end‑measure inspections and small‑feature checks. Thanks to the fine diameter and stable geometry, inspection sequences become more reliable, reducing repeat measurements and downstream rework. The combination of traceable tolerances and a workshop‑oriented design supports higher process yield and consistent quality control across batches. Robust materials and transport protection for everyday workshop use Manufactured from special steel, the pin balances hardness and toughness to withstand frequent handling in a production setting while maintaining contact surface integrity. Supplied in a protective transport box, the item arrives secured for transit and workshop movement, lowering the risk of damage before first use. The workshop‑grade finish makes the probe suitable for routine checks on assemblies and fixtures where durability and repeatability matter. Practical handling and integration into inspection routines The pin’s 40 mm functional length and 57 mm overall length suit a variety of gauges and fixture set‑ups common in machining and assembly shops. Its small mass facilitates quick positioning for short, repetitive inspections and contributes to minimal probe-induced deviation. Compatibility with standard gauge holders and fixture bores makes the item a convenient choice for measurement stations that require frequent verification of small bores, end faces and locating features. Request the M323.048 from Metav Werkzeuge for dependable workshop inspection tasks or contact Metav’s consultants for advice on integrating the pin into existing gauging systems — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.048 GTIN: 4061905054341 Category: Messstifte Diameter: 0.48 mm Tolerance/accuracy: ±0.002 mm Pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Material: Special steel Version: Workshop execution Supply: Protective transport box FAQ What is the exact diameter and tolerance of this test pin? The M323.048 test pin has a diameter of 0.48 mm and an accuracy of ±0.002 mm, making it suitable for tight end‑measure checks. Which material is the pin made from and how does that affect wear? The pin is made from special steel, selected to provide a balance of hardness and resilience; this improves wear resistance for routine workshop inspections. Is the pin supplied ready for transport and storage? The item is supplied in a protective transport box to prevent damage during transit and handling; the box is intended mainly for transport protection. For which applications is this test pin best suited? This gauge pin is intended for precise end‑measure checks, small bore verification and fixture testing where a 0.48 mm probe and ±0.002 mm accuracy are required. Can the pin be used in standard gauge holders and fixtures? Yes, the pin’s dimensions and overall design allow integration with common gauge holders and fixtures used in machining and quality control stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.49mm Test Pin Single ±0.002mm, 40mm Stem 57mm Overall Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop construction for precise end‑measurements. The 0.49 mm gauge pin with ±0.002 mm tolerance and a 40 mm pin length supports reliable reference checks in routine inspection tasks. Order the test pin directly via Metav Werkzeuge or ask the consultants for application advice. M323.049 Test pin gauge – 0.49 mm, ±0.002 mm (Metav IndustryLine) A M323.049 precision test pin designed for high‑accuracy end and reference measurements in workshop and inspection environments Precision diameter 0.49 mm, tolerance ±0.002 mm Hardened special steel construction 40 mm measuring pin length, 57 mm overall Workshop‑grade design for robust use Engineered accuracy for repeatable measurements The gauge pin delivers a 0.49 mm nominal diameter with a verified ±0.002 mm manufacturing tolerance, making it suitable for tight tolerance checks and go/no‑go reference routines. This level of accuracy reduces uncertainty in repeat measurements and supports traceable inspection traces when used as a tactile reference in quality control. The small diameter and fine tolerance allow detection of minute deviations that would be invisible with coarser gauges; the result is fewer downstream rejects and a more stable production output. Durable construction and compact handling Manufactured from special steel and supplied in a single, workshop‑oriented configuration, the pin combines wear resistance with a compact footprint. The measuring pin is 40 mm long and the total length is 57 mm, dimensions that balance accessibility into tight bores with comfortable handling. At approximately 0.003 kg, the probe is lightweight yet stiff enough to avoid flex under typical measuring forces, enabling consistent contact geometry and repeatable results over many inspection cycles. The workshop execution denotes robust finishing appropriate for daily use. Practical applications and integration into inspection workflows This precision measuring probe is intended for end‑measurements, fit checks and verification tasks where a small‑diameter reference is required. Supplied as a single test pin, it is straightforward to integrate into existing pin sets, fixture checks or bespoke gauges used on the shop floor. The compact form factor supports rapid acceptance testing and reduces setup time for serial inspections; when paired with calibrated masters or bench instruments it contributes to a documented measurement chain and improves process capability figures. For fast supply and tailored advice on using Metav IndustryLine measuring components like the M323.049, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: M323.049 GTIN: 4061905054358 Category: Messstifte Facts Nominal diameter: 0.49 mm Manufacturing tolerance: ±0.002 mm Measuring pin length: 40 mm Overall length: 57 mm Weight: 0.003 kg Special features Material: Special steel Delivered: single test pin Workshop execution (robust finishing) ECLASS: 21170231 FAQ What accuracy can be expected from this gauge pin? The M323.049 test pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for fine‑tolerance checks in workshop inspections. Is the pin suitable for insertion into small bores and tight features? Yes, the 0.49 mm diameter and 40 mm pin length make this probe well suited to access narrow bores and detailed features for end‑measurement tasks. What material is used and how does that affect wear? The pin is made from special steel, offering improved wear resistance compared with standard tool steels; this enhances lifetime under regular inspection use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5 mm Gauge Pin, Single, ±0.001 mm Accuracy, 50 mm Length, Workshop Version - Metav IndustryLine
Combine ±0.001 mm accuracy with a 0.50 mm testing diameter and robust special steel construction for dependable micro-inspection tasks; the compact form and workshop-grade finish support repeatable results in high-throughput inspection routines. Order the M323.050 test pin directly via Metav Werkzeuge or consult the technical team if further specification is required. Test pin M323.050 — single, 0.50 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The Test pin M323.050 is a precisely ground inspection pin for micro-scale end‑measurements, designed for workshop environments and quality‑control stations. High precision ±0.001 mm tolerance Compact 0.50 mm diameter for micro checks 50 mm length for access to recessed features Workshop version supplied in protective case Accuracy that reduces inspection uncertainty A tolerance of ±0.001 mm positions this inspection pin in the realm of high-precision gauging. Such fine tolerance means the pin will reliably indicate dimensional deviations at the micrometre level, which is essential when assessing critical end dimensions. The narrow 0.50 mm diameter allows checks inside small bores or against fine features; combined with a calibrated manufacturing process, the result is high repeatability and fewer false rejects during routine quality control. Robust material and handling for daily workshop use Made from special steel, the inspection pin balances hardness and dimensional stability, resisting wear during repetitive contact with measured parts. The workshop version finish provides practical resilience for shop-floor conditions, while the low mass (0.003 kg) and slender geometry ease handling during rapid inspection cycles. Supplied in a protective case, the pin is kept secure during storage and transport, preserving the measuring surface and ensuring consistency from the first use. Practical applications and process benefits This inspection pin is intended for precise end‑mass checks, internal feature verification and micro-component inspection. Its geometry suits tasks where small contact diameters are required—such as alignment checks on small shafts, end‑face verification, or fixture set‑up control. By offering dependable micrometric feedback, the tool helps streamline quality workflows, reduces rework and supports faster decision making on the production line. Traceability and procurement conveniences for industry use Identifiers such as SKU M323.050 and GTIN 4061905054365 make procurement and inventory tracking straightforward within ERP systems. Supplied as a single unit, the pin integrates easily into inspection kits and fixture sets. The combination of clear identification, compact design and workshop durability supports reliable stock rotation and predictable availability for assembly or inspection teams. Contact Metav Werkzeuge for procurement advice on the M323.050 test pin or to discuss integration into existing inspection setups Technical data SKU: M323.050 GTIN: 4061905054365 Material: special steel Weight: 0.003 kg Length: 50 mm Diameter: 0.50 mm Tolerance: ±0.001 mm Facts Diameter: 0.50 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg GTIN: 4061905054365 Special features Workshop version Supplied in protective case for transport and storage Single-piece test pin Category: test pins FAQ What level of precision does this test pin offer? The M323.050 test pin provides a tolerance of ±0.001 mm, offering micrometre-level precision for sensitive inspection tasks. Which material is the pin made from and why does it matter? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance suitable for repeated workshop use. Is the M323.050 suitable for checking small bores or fine features? Yes, the 0.50 mm diameter is specifically suited to micro-scale inspections and recessed features that require a narrow contact diameter. How is the test pin supplied and protected during transport? The M323.050 is supplied as a single unit in a protective case to safeguard the measuring surface during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5 mm Maximum Precision Plug Gauge Set Tapered, 8‑Piece 150 mm Length, Ring‑Mounted - Metav IndustryLine
Take advantage of precise gap control, the broad 0.05–0.50 mm thickness range and the practical 150 mm blade length to standardise clearance checks across the workshop. Order the set directly via Metav Werkzeuge or consult our specialists for matching measurement kits. Precision Feeler Gauge Set M318.022.1 — 8‑piece ring set, 0.05–0.50 mm, 150 mm (Metav IndustryLine) A Precision Feeler Gauge Set M318.022.1 designed for accurate gap and clearance measurement in assembly, maintenance and inspection tasks Eight blades on a retaining ring Thickness range 0.05–0.50 mm 150 mm blade length for reach Conical tips for precise gap access Precise, consistent thickness control for routine inspection This set provides eight individual blades across the 0.05–0.50 mm range, each finished to consistent thickness for reproducible checks on valve clearances, shim stacks and mating surfaces. The 150 mm blade length gives extended reach into recessed joints while the conical tips enable access to narrow gaps without disturbing adjacent components. The ring-mounted format keeps all gauges assembled for efficient selection and prevents individual blades being lost during repetitive tasks. The overall design supports steady, repeatable measurement routines that increase throughput and reduce rework. Benefits for workshop efficiency and quality control A compact, well-ordered feeler gauge set accelerates routine maintenance and first-off inspections by combining a practical spread of thicknesses with simple handling. The blades’ nominal accuracy of 0.012 mm and low weight (0.04 kg) ensure minimal operator fatigue when carrying out extended measurement sequences. By standardising gap checks with a single, engineered set, inspection intervals become more consistent and machine downtimes can be reduced. The product’s construction and specified dimensions make it suitable for both bench-level quality checks and on‑machine adjustments. Practical handling and longevity in everyday use The set is supplied as a complete 8‑piece kit on a secure retaining ring, simplifying storage and transport between work stations. The conical blade profile reduces the risk of catching on edges during insertion, while the 12.7 mm blade width provides a stable contact area for accurate feel. Visual identification is straightforward thanks to the clear progression of blade thicknesses assembled in sequence. Routine cleaning and light lubrication will preserve the blades’ condition and ensure longevity under standard workshop conditions. Contact Metav Werkzeuge today to request delivery of the Precision Feeler Gauge Set M318.022.1 from stock in Emmerich or to receive advice on complementary measuring tools and sets tailored to specific inspection tasks. Technical data Article number: M318.022.1 GTIN: 4054469164724 Manufacturer: Metav IndustryLine Norm: Werksnorm Facts Thickness range: 0.05–0.50 mm Individual thicknesses: 0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 mm Blade length: 150 mm Blade width: 12.7 mm Nominal accuracy: 0.012 mm Weight: 0.04 kg Pieces per set: 8 Tariff number: 90173000 Special features Conical form for improved access Ring-mounted set for organisation Supplied as an 8-piece set Suitable for workshop and inspection use FAQ Are the blade thicknesses marked for quick identification? The Precision Feeler Gauge Set M318.022.1 features a clear sequence of thicknesses that allows quick visual selection of each blade. Can this set be used for engine valve clearance checks? Yes, the M318.022.1 feeler gauge set is suitable for valve clearance and similar gap measurements thanks to the 0.05–0.50 mm range and conical tips. Is the retaining ring removable for individual blade use? The retaining ring on the set keeps blades organised; it can be opened to remove individual blades when required for specific measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5 mm Precision Feeler Gauge Set 8pc, Tapered, Length 100 mm - Metav IndustryLine
Reliable measurement for fine mechanical work is achieved by the set’s 0.05–0.5 mm coverage, the stable 100 mm blade length and special steel construction; the eight blades deliver a compact, graduated thickness range for repeatable gap and clearance checks. Order the precision feeler gauge set directly via Metav Werkzeuge or ask our consultants if needed. Precision Feeler Gauge Set M318.022 – 8-piece, 0.05–0.5 mm, 100 mm A Precision Feeler Gauge Set M318.022 engineered for accurate gap and clearance measurement in assembly, inspection and maintenance tasks. 8 precision blades covering 0.05–0.5 mm 100 mm blade length for stable handling Hardened special-steel construction Factory standard conformity (Werksnorm) Consistent accuracy for demanding measurements The gauge set provides a continuous thickness range from 0.05–0.5 mm in eight graduated steps, enabling precise selection of the required shim or clearance. With a quoted accuracy of 0.012 mm, the blades support fine adjustment tasks in mechanical assembly and precision fitting. The clearly graduated sizes reduce interpretation errors, while the compact nature of the set makes it suitable for bench and workshop use where repeatable, documented measurements are needed. This focus on measurable performance supports efficient quality control and reduces rework. Robust dimensions and material for everyday workshop use Each blade measures 100 mm in length, which gives a steady contact area and good guidance during insertion between mating parts. Manufactured from special steel, the blades combine surface hardness with ductile resilience to resist bending during repeated use. The eight-part arrangement with standard thickness increments allows controlled selection of one or two blades for shim equivalence or feeler stacking, so a single set covers a wide variety of clearance checks without frequent tool changes. The modest weight and compact format make it straightforward to carry within tool kits or inspection cases. Practical applications and traceable production standard The set is delivered as an 8-piece kit in accordance with the declared factory standard (Werksnorm), providing a verified baseline for workshop inspection processes. Typical applications include valve and bearing clearance checks, spark plug gap setting, jig and fixture shimming, and small-bore gap measurement in precision engineering. The clear progression of blade thicknesses simplifies documentation of measured clearances and supports consistent assembly tolerances. For purchasers seeking an economical yet technically sound feeler blade solution, this set balances reach, rigidity and repeatability. Choose the Metav IndustryLine Precision Feeler Gauge Set M318.022 for reliable gap measurement; contact Metav Werkzeuge for specialist advice and dependable supply from Emmerich Technical data Article number: M318.022 GTIN: 4054469164717 SKU: M318.022 Facts Measurement range: 0.05–0.5 mm Individual blade length: 100 mm Accuracy: 0.012 mm Weight (set): 0.02 kg Pieces per set: 8 Tariff number: 90173000 Special features Material: special steel Conformity: Werksnorm Set: 8 precision thicknesses (0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 mm) Suitable for assembly, inspection and maintenance tasks FAQ What thicknesses are included in the set? The kit contains eight blades with thicknesses of 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40 and 0.50 mm for fine gradation during clearance checks. Is the blade length suitable for stable measurements? Yes, the 100 mm blade length provides a stable contact area and improved guidance for insertion between components during measurement. Which materials are the blades made from? Blades are manufactured from special steel, chosen for a balance of surface hardness and resilience suitable for repeated workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5 mm Precision Feeler Gauge Set Tapered, 200 mm Length, 8-Piece, Ring Holder - Metav IndustryLine
Take advantage of precise gap setting and consistent repeatability offered by the 8-piece precision feeler gauge set, combining a conical blade profile with a long 200 mm blade length for access into deeper assemblies; order directly via Metav Werkzeuge or consult our specialists for application advice. Precision Feeler Gauge Set M318.022.2 (8-piece) — 0.05–0.50 mm, 200 mm blades by Metav IndustryLine The Precision Feeler Gauge Set M318.022.2 is a ring-mounted series of calibrated feeler blades designed for accurate clearance and gap measurement in mechanical assemblies and inspection tasks. Conical blade geometry for precise access 8 blades covering 0.05–0.50 mm 200 mm blade length for deep measurements Supplied on a durable retaining ring Accurate measurement for small clearances This set delivers reliable precision for fine gap setting and inspection, with individual blade thicknesses of 0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 mm. The manufacturing tolerance of ±0.012 mm ensures repeatable results when aligning components, setting clearances or calibrating fixtures. The combination of fine thickness increments and consistent production tolerances reduces adjustment cycles and speeds up inspection routines, making the set suited to precision shops and maintenance departments where measurable repeatability is required. Designed for practical reach and accessibility Each blade runs to a length of 200 mm and a nominal width of 12.7 mm, allowing access into deeper recesses and between stacked parts where shorter gauges would be difficult to use. The conical tip design assists in entering tight gaps and gives a progressive feel when locating minimum clearances. Ring mounting keeps the blades organised and ready for fast selection during process set-up, while the slim blades retain sufficient stiffness to avoid bending under normal measuring use, preserving dimensional integrity for workshop measurements and assembly control. Robust workflow benefits and common applications Presented as an 8-piece set on a retaining ring and manufactured to the factory standard (Werksnorm), the gauges are suited for valve clearance setting, shim selection, bearing play checks and fine mechanical assembly work. The long blade length reduces the need for improvised extensions, supporting safer and faster inspections. As a practical tool for quality control and assembly teams, the set improves throughput by cutting time spent searching for the correct feeler and by reducing rework through more consistent measurement transfer between operators. Contact Metav Werkzeuge to discuss fit for purpose and secure the Metav IndustryLine M318.022.2 feeler gauge set — Metav’s Emmerich team can advise on workshop integration and supply logistics Technical data Article number: M318.022.2 GTIN: 4054469164632 Manufacturer: Metav IndustryLine Set: 8-piece Numbers / Core technical data Measurement range: 0.05–0.50 mm Blade thicknesses: 0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 mm Blade length: 200 mm Blade width: 12.7 mm Weight (set): 0.05 kg Manufacturing tolerance: ±0.012 mm Special features / Versions Conical blade geometry for improved access Supplied on a retaining ring for organised storage Manufactured to Werksnorm (factory standard) Delivered as a complete set of 8 blades FAQ What blade sizes are included in the set? The set includes blades of 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40 and 0.50 mm, supplied as an 8-piece ring-mounted assembly (M318.022.2) from Metav IndustryLine. Is the set suitable for precision assembly work? Yes — the Metav IndustryLine M318.022.2 set offers a manufacturing tolerance of ±0.012 mm and long 200 mm blades, making it suitable for fine assembly, valve clearances and inspection tasks requiring repeatable gap measurement. How are the blades stored and selected during use? The blades are mounted on a durable retaining ring to keep instruments organised and enable quick selection; the conical blade tips help access narrow gaps while maintaining sufficient stiffness for reliable feel. Can the gauges be used for multiple measurement types? The ring-mounted feeler blades are intended primarily for gap and clearance checks, shim selection and bearing play assessment; the long blades also suit deeper measurement locations where typical short gauges fall short. What standard does the product comply with? The feeler gauge set is produced to the factory standard (Werksnorm) and supplied as a complete 8-piece set by Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-1 mm Ceramic Gauge Pin Set 51 Pieces 0.01 mm Steps In Plastic Case - Metav IndustryLine
Take advantage of exceptionally stable, wear‑resistant zirconia pins and submicron repeatability for reliable gauge work; combine ±0.0015 mm accuracy, 51 finely graduated pins and compact 50 mm length for efficient micro‑metrology tasks. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge pin set, 51-piece — zirconia ceramic, 0.01 mm steps (Metav IndustryLine) The ceramic gauge pin set, 51-piece is a workshop‑grade collection of precision pins for micro‑metrology and fit inspection in fine mechanical and toolmaking environments. Very high dimensional accuracy ±0.0015 mm Zirconia ceramic: antimagnetic and wear‑resistant 51‑piece range 0.50–1.00 mm in 0.01 mm increments 50 mm pin length with measuring‑pin holder Submicron accuracy for repeatable inspections The set delivers exceptional repeatability, with an accuracy of < ±0.0015 mm, which translates to reliable gap and fit checks where margins are measured in micrometres. Such precision reduces rework and inspection time by providing a verifiable reference for bore gauges, plug gauges and optical comparators. The fine 0.01 mm graduations across the 51‑piece set make it straightforward to step through fits and tolerances without intermediate adjustments, supporting efficient process control and traceable results. Robust zirconia construction for long service life Made from zirconia ceramic, the pins combine high hardness (HV 1250) with intrinsic corrosion resistance and antimagnetic behaviour. The material choice ensures low friction and wear‑resistance under repeated insertion and measurement cycles, preserving diameter integrity and extending usable life. For workshops that measure small bores or set tight clearances, this material stability maintains dimensional certainty and minimises measurement drift over time. Practical set design for micro‑metrology workflows Each pin measures 50 mm in length and the set is supplied complete with a measuring‑pin holder and protective plastic case, enabling controlled handling and safe storage. Designed for micro‑metrology and fine mechanical work, the range 0.50–1.00 mm with 0.01 mm steps is ideal for small bore gauging, checking pin fits and calibration tasks in assembly or toolroom contexts. The compact package and clear graduation support rapid identification and sequence use during quality checks, while the holder aids consistent alignment and insertion force. For tailored advice or to reserve this Metav IndustryLine ceramic gauge pin set for immediate dispatch, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M318.590 Manufacturer: Metav IndustryLine Product: Ceramic gauge pin set, 51-piece Facts Measuring range: 0.50–1.00 mm Step size: 0.01 mm Pin length: 50 mm Pieces: 51 Accuracy: < ±0.0015 mm Hardness: HV 1250 Special features Material: zirconia ceramic, corrosion‑resistant, antimagnetic Wear‑resistant surface With measuring‑pin holder Supplied in plastic case Workshop version FAQ What tolerance can be expected with this set? The ceramic gauge pin set achieves an accuracy of < ±0.0015 mm, providing submicron repeatability suitable for tight fit and bore inspections. Is the material suitable for use near magnetic or sensitive components? Yes, the zirconia ceramic construction is antimagnetic and corrosion‑resistant, making the set appropriate for environments where magnetic interference must be avoided. What sizes are included and how fine are the increments? The set covers 0.50–1.00 mm in 0.01 mm increments across 51 pins, allowing precise stepwise checks and comparisons. How are the pins supplied for workshop use? Delivery includes the 51‑piece set with a measuring‑pin holder, supplied in a protective plastic case for safe transport and organised storage. Can this set be used for comparative gauging and setting plug gauges? Yes, the pins are suitable for comparative gauging, plug gauge setting and fine inspection tasks where high hardness and dimensional stability are required; the set (M318.590) serves as a precise reference collection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-1 mm Plug Gauge Set 51 Pieces, 0.01 mm Increments, Special Steel, Case - Metav IndustryLine
High-precision inspections are supported by the fine 0.01 mm graduations and a tight tolerance of ±0.002 mm, making this set ideal where repeatable dimensional checks are required; the robust special steel construction secures long-term stability. Order the gauge pin set directly via Metav Werkzeuge or consult the Metav advisors for application-specific guidance. Gauge Pin Set M318.550 – 0.50–1.00 mm, 0.01 mm steps The Gauge Pin Set M318.550 is a compact inspection kit designed for precise hole, bore and plug verification in workshop and production environments. Precision 0.01 mm increments Measuring range 0.50–1.00 mm Special steel for long service life Compact set for bench-top inspection Accurate dimensional control for production assurance The set delivers repeatable measurements thanks to the fine 0.01 mm step size and a documented accuracy of ±0.002 mm, which supports tight tolerance acceptance and in-process checks. These attributes make the kit suitable for small-bore verification, gauge matching and comparative inspection tasks in mechanical workshops and quality labs. The measurable values are easily referenced during inspection routines, reducing interpretation errors and accelerating decision-making in production control. Practical layout that speeds up inspection workflows Designed as a ready-to-use workshop kit, the pins are arranged to simplify selection and minimise handling time during batch checks. The compact form factor and organised order of sizes support efficient bench-top operations and fast verification of mating parts or drilled holes. The set format reduces the need for multiple instruments and enables quick pass/fail assessments, improving throughput in small-component assembly and maintenance tasks. Durable materials for consistent results over time Manufactured from special steel, the pins retain dimensional stability under normal workshop conditions and resist premature wear during frequent use. The material choice ensures consistent contact geometry and reliable fit results, which is essential for repeat measurements and traceable inspection records. The robust construction also reduces the frequency of replacements, offering a practical life‑cycle advantage for production and quality departments. Contact Metav Werkzeuge for tailored advice and to secure the Metav IndustryLine gauge pin set M318.550 for precise small-bore inspection and reliable workshop control Technical data Article number: M318.550 GTIN: 4054469129334 Customs tariff number: 90173000 Facts Measuring range: 0.50–1.00 mm Graduation/step: 0.01 mm Accuracy/tolerance: ±0.002 mm Pieces per set: 51 Weight: 0.9 kg Pin length: 50 mm Special features Material: Special steel Set type: Gauge pin set for plug/bore verification Application: Workshop and production inspection Format: Sequential sizes for quick selection FAQ What tolerance can be expected from this gauge pin set? The gauge pin set M318.550 is specified with an accuracy of ±0.002 mm, providing tight tolerances suitable for fine inspection tasks. Is the material suited to frequent workshop use? Yes, the pins are made from special steel, selected for dimensional stability and resistance to wear under regular bench‑top inspection routines. How are the sizes arranged for selection during checks? The set contains sequential sizes in 0.01 mm increments from 0.50 to 1.00 mm, enabling quick selection and swift go/no‑go assessments in production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-10mm Go/No-Go Drill Gauge Steel - Filetta
Take advantage of accurate diameter checks, a compact 0.5–10 mm range and robust steel construction to streamline drill verification in the workshop. Order the item directly via Metav Werkzeuge or consult our specialists for tailored advice. Drill Gauge MS910.501 — steel drill gauge, 0.5–10 mm range The Drill Gauge MS910.501 is a compact steel gauge designed for rapid identification and verification of drill diameters in workshop, tooling and inspection environments. Robust steel construction Measuring range 0.5–10 mm Steps every 0.1 mm for quick checks Compact size ideal for micro measurements Fast, reliable diameter checks that speed up inspection The instrument enables immediate validation of drill sizes, offering a measuring range of 0.5–10 mm with clear, regular increments of 0.1 mm for fast go/no-go decisions. This makes the tool particularly effective when time is critical: operators spend less time searching for the right drill and more time on machining. The compact form factor supports quick handling at the bench or next to a machine, reducing workflow interruptions and improving throughput. Built for repeatable precision and easy interpretation Constructed from steel for consistent dimensional stability and wear resistance, the gauge provides repeatable checks across many cycles of use. The regular step spacing simplifies visual comparison between the tool and the corresponding gauge slot, which is especially useful when a production line requires fast sampling rather than laboratory-level metrology. The simple mechanical design avoids electronics, so operation remains straightforward and maintenance demands are minimal while preserving dependable performance. Suited to micro work and small-scale quality control With its maximum measuring range of 10 mm, the gauge is classified in the micro category—ideal for fine mechanical and watchmaking tasks as well as routine checks in general machining where small-diameter drills are common. The tool supports quick decision-making during setup and run-time inspections, contributing to consistent part quality and fewer tool-change mistakes. Where traceable calibration is required, consultancy on calibration options can be provided to match workshop quality routines. Contact Metav Werkzeuge for procurement details, calibration options and application advice on the Filetta Drill Gauge MS910.501 — direct supply from Emmerich to the workshop bench. Technical data Article number: MS910.501 Manufacturer: Filetta Type: Drill gauge Facts Measuring range: 0.5–10 mm Step size: 0.1 mm Minimum: 0.5 mm Maximum: 10 mm Special features Material: Steel Application: Drill diameter verification Category: Gauges / Measuring pins FAQ What measuring range does this gauge cover? The gauge covers a range from 0.5 mm to 10 mm, making the Drill Gauge MS910.501 suitable for small-diameter drill checks. How fine are the increments on the gauge? Increments are 0.1 mm, which allows for quick visual checks and straightforward go/no-go comparison when verifying drill diameters. Is the gauge suitable for workshop use or only for metrology labs? Designed for practical workshop use, the Filetta drill gauge provides robust, repeatable checks ideal for bench and production environments. What material is the gauge made from? The gauge is made from steel, selected for dimensional stability and wear resistance under regular inspection cycles. Can the gauge be used during machine setup? Yes, the compact size and clear steps make the MS910.501 convenient for use during machine setup and routine sampling inspections. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
0.5-11 mm Digital Feeler Gauge With 10 mm And 20 mm Gauge Blocks, 0.001 mm Readout - Metav IndustryLine
Take advantage of high-resolution digital measuring, a compact measuring range and robust tool-steel construction for reliable gap checks in production and inspection. Order the gauge directly via Metav Werkzeuge or contact our consultants for application advice. Digital feeler wedge M240.170 — digital wedge gauge, 0.5–11 mm, 0.001 mm resolution (Metav IndustryLine) The Digital feeler wedge M240.170 is a compact digital gauge designed for precise measurement of narrow gaps and clearances in workshop and quality-control environments Digital readout with 0.001 mm resolution Measuring range 0.5–11 mm for narrow gaps Supplied with 10 mm and 20 mm gauge pieces Hardened tool-steel body for robust use Precision where tight tolerances matter The wedge gauge delivers a resolution of 0.001 mm, making it suitable for applications that require fine discrimination between very small gap sizes. The compact measuring range (0.5–11 mm) targets narrow clearances commonly encountered in bearing seats, valve guides and mating parts where a small deviation can affect function. Built from tool steel, the gauge maintains dimensional stability under routine shop use, which supports reliable repeatability and reduces rework in production. Faster inspections with clear digital feedback A direct digital readout speeds up measurement cycles and reduces interpretation errors compared with mechanical scales. The clear numerical display shortens inspection time and integrates easily into a standardised quality routine, which contributes to leaner workflows on the shop floor. Supplied 10 mm and 20 mm gauge pieces extend the effective range and enable quick reference checks without additional setups, supporting efficient sampling during first-article inspection or in-process control. Designed for everyday workshop handling The device’s compact form and modest weight make it straightforward to handle at the bench or by an inspector on the machine. The solid construction protects the sensing faces during normal use and helps preserve accuracy over time. Readings are immediately actionable for production staff and inspectors, allowing faster decisions about accept/reject criteria and reducing stoppages. Where traceable measurement records are required, the stable performance of the instrument supports consistent quality documentation. Contact Metav Werkzeuge today to confirm suitability for the application and arrange prompt delivery from Emmerich, backed by expert consultation. Technical data Article number: M240.170 GTIN: 4054469146225 EClass: 21170342 Customs tariff number: 90173000 Key figures Measuring range: 0.5–11 mm Readout / resolution: 0.001 mm Weight: 0.4 kg Special features Digital device Material: tool steel Supplied with 10 mm and 20 mm gauge pieces Category: Gauge pins; Gauges FAQ What is the smallest increment detectable with this gauge? The digital wedge provides a resolution of 0.001 mm, enabling detection of very small changes in gap width with the Metav IndustryLine digital feeler wedge M240.170. For which applications is this wedge gauge best suited? It is ideal for narrow-gap inspections such as bearing clearances, valve guides and precision assemblies where the 0.5–11 mm measuring range covers typical clearance dimensions. Are gauge pieces included to extend the measuring setup? Yes, the delivery includes 10 mm and 20 mm gauge pieces to facilitate extended checks and quicker reference measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-11 mm Gap Gauge Reading 0.1 mm, Tool Steel - Metav IndustryLine
Take advantage of a compact, reliable inspection tool that combines a 0.5–11 mm measuring range, 0.1 mm graduation and robust tool‑steel construction for fast, repeatable gap checks on the shop floor. Order the wedge gauge directly via Metav Werkzeuge or consult our technical team for application advice. Wedge gauge 0.5–11 mm, 0.1 mm graduation (M318.043) — Metav IndustryLine A Wedge gauge 0.5–11 mm, 0.1 mm graduation designed for quick and repeatable gap‑width checks in production, assembly and maintenance environments Compact 0.5–11 mm measuring range Graduation 0.1 mm for clear readings Analogue nonius scale for straightforward use Made from tool steel for workshop durability Precision where fast checks matter The wedge gauge delivers a simple, rational solution for checking narrow gaps and clearances with a measuring range of 0.5–11 mm and a clear 0.1 mm graduation. The analogue nonius provides an immediate, readable value that is ideal for routine inspections and go/no‑go assessments. This setup reduces measurement time compared with micrometre setups where access is limited, while offering reliable repeatability for everyday quality control tasks. The compact format suits bench or machine‑side use and supports efficient inspection cycles. Robust build for everyday workshop use Constructed from tool steel, the gauge withstands the typical mechanical demands of industrial use without adding unnecessary weight. At approximately 120 g, the unit is easy to handle and manoeuvre into narrow gaps while remaining stable during measurement. The solid construction ensures dimensional stability over many inspection cycles, contributing to consistent results and lower replacement frequency. The simple, analogue design minimises electronic vulnerability and maintenance needs, making it a cost‑effective addition to standard gauging toolkits. Practical measurement workflow and integration Designed as a purpose‑built gauge for gap measurement, the instrument integrates smoothly into production routines: slide the wedge into the gap, read the nonius for a direct value, and record or compare against tolerance limits. The straightforward operation accelerates checks during setup, in‑process control or final inspection. The compact instrument complements digital inspection tools where rapid verification is needed before switching to higher‑resolution devices. For specific application advice or measurement strategies, technical consultants at Metav Werkzeuge can advise on best practice and complementary instruments. Request a quotation or application advice from Metav Werkzeuge — our Emmerich team will recommend the right inspection approach for your process and supply the M318.043 wedge gauge promptly Technical Data Article number: M318.043 GTIN: 4054469168418 Label: Wedge gauge 0.5–11 mm, 0.1 mm graduation Facts Measuring range: 0.5–11 mm Graduation / reading: 0.1 mm Weight: 0.12 kg Tariff code: 90173000 ECLASS: 21170342 Special features Material: Tool steel Analogue nonius scale Categories: Gauges; Measuring pins FAQ How is the gauge best used for gap measurements? The wedge gauge M318.043 is inserted into the gap until it seats; the analogue nonius then indicates the gap width on the 0.1 mm scale for direct comparison with tolerance limits. Is the instrument suitable for routine production checks? Yes, the tool steel construction and compact measuring range make the wedge gauge well suited to rapid, repeatable production checks and maintenance inspections. What documentation accompanies the product? The wedge gauge is supplied with standard product information and identification; for specific certification needs please enquire with Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-13mm Probe Holder With Good/Reject Indication - Metav IndustryLine
Take advantage of the combination of clear pass/fail signalling, compact bench-ready dimensions and lightweight handling for faster inspection cycles; order the holder directly via Metav Werkzeuge or ask our consultants if technical details are required. Measuring pin holder M318.560 – Holder for measuring pins 0.5–13 mm with Good/Reject indication (Metav IndustryLine) A compact measuring pin holder designed to accept pins from 0.5 to 13 mm and to provide immediate visual 'Good' or 'Reject' feedback for inspection benches and production control. *Compact 113 mm length for tight setups *Compatible with measuring pins 0.5–13 mm *'Good' and 'Reject' optical marking *Lightweight 0.1 kg for easy handling Reduce inspection time with instant pass/fail feedback The holder offers clear Good / Reject signalling that speeds up routine checks and reduces decision latency on the shop floor. By providing a direct visual cue, the device supports faster sorting and fewer handling steps, which improves overall throughput. The design concentrates on pragmatic functionality: quick identification of non-conforming parts and immediate separation without additional gauges or complex readouts, improving efficiency in repetitive inspection tasks. Compact form that fits crowded benches and fixtures With a nominal length of 113 mm and a weight of 0.1 kg, the holder fits small inspection stations and can be integrated into existing jigs without obstructing neighbouring tools. The compact footprint supports ergonomic placement close to machining centres or assembly lines, reducing travel time between process steps. Its compatibility with a wide pin range means fewer different holders are required, simplifying inventory and workflow planning while maintaining repeatable handling. Reliable compatibility and simple procurement The accessory accepts measuring pins across the specified range and is delivered under the Metav IndustryLine range for traceable sourcing. Clear identification and a standard article number streamline purchasing and stock-keeping, while the compact construction maintains measurement repeatability under routine use. The solution is aimed at workshop and production environments that require robust, low-complexity components to support fast, repeatable inspection procedures. For tailored advice on integrating the M318.560 into existing inspection routines, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and compatibility. Technical data Article number: M318.560 GTIN: 4054469168241 eClass: 21170231 HS tariff number: 90173000 Facts Length: 113 mm Weight: 0.1 kg Special features Measuring pin range: 0.5–13 mm Visual 'Good' and 'Reject' indication Category: Measuring pins / Gauges FAQ What pin sizes does the holder accept? The holder accepts measuring pins in the 0.5–13 mm range as specified for the M318.560 measuring pin holder. Is the pass/fail indication mechanical or visual only? The product provides a clear visual 'Good' / 'Reject' indication suitable for rapid bench checks and sorting. Can the holder be integrated into a fixture or jig? Yes, the compact 113 mm length and lightweight design make the holder suitable for incorporation into small fixtures or inspection benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-1mm Gauge Pin Set 51pcs 0.01mm Steps With Retainer, Supplied In Case - Metav IndustryLine
Benefit from precise, repeatable micro‑diameter checks thanks to the fine 0.01 mm graduation and the complete 51‑piece configuration; the compact pins and special steel construction ensure reliable wear resistance for frequent inspection tasks. Order the pin gauge set directly via Metav Werkzeuge or ask the consultants if additional data is required. Pin Gauge Set M318.570 — 51‑piece pin gauges, 0.5–1.0 mm range, 0.01 mm increments (Metav IndustryLine) A Pin Gauge Set M318.570 designed for high‑resolution inspection of small bores and clearance checks in precision workshops and metrology routines. 51-piece set for fine bore checking 0.5–1.0 mm range in 0.01 mm steps Special steel for wear resistance Includes practical pin holder Consistent micro‑diameter precision for production control The set provides high precision inspection in a compact format, with a fine 0.01 mm graduation that supports systematic sorting and verification of small bores. A nominal accuracy value of 0.004 mm describes the manufacturing tolerance of the pins, which translates to dependable repeatability during batch checks and reduces the risk of scrap or rework. This level of resolution is particularly valuable in micro‑component assembly and precision instrument manufacture where tight clearances determine fit and function. Complete coverage and ergonomic handling for workshop use Covering the range from 0.5–1.0 mm in uniform 0.01 mm steps, the set bundles 51 consecutive sizes to eliminate guesswork when selecting reference pins. The inclusion of a pin holder improves handling and speeds up measurement cycles while protecting the pins from accidental damage during insertion and removal. The special steel material offers enhanced wear resistance and dimensional stability under frequent use, making the set suitable for both routine shop‑floor inspection and quality‑assurance benches. Durability and repeatability that support quality workflows With a compact pin length of 50 mm and a set weight of 1.03 kg, the kit is easy to store and carry between inspection stations without compromising robustness. The systematic increments and material choice combine to deliver repeatable measurements for small bores, gauges and fittings, helping to streamline incoming inspection and in‑process checks. Ideal applications include fine mechanical workshops, electronic connector verification and toolmaking where consistent micro‑measurement is essential for product reliability. Choose Metav IndustryLine for dependable micro‑inspection: contact Metav Werkzeuge for tailored technical advice and procurement assistance Technical Data Article number: M318.570 GTIN: 4054469156163 SKU: M318.570 Set: 51 pieces Facts Measurement range: 0.5–1.0 mm Graduation: 0.01 mm Nominal accuracy: 0.004 mm Pins per set: 51 Pin length: 50 mm Weight (set): 1.03 kg Special features Material: Special steel Includes pin holder Product type: Pin gauge set EClass: 21170231 Tariff number: 90173000 FAQ What measurement range does the set cover? The set covers 0.5–1.0 mm in 0.01 mm increments, providing continuous coverage across this micro‑diameter span. How many pins are included and how are they graduated? The kit contains 51 pins, graduated in steps of 0.01 mm to allow precise incremental selection for bore and clearance checks. What material are the pins made from? Pins are manufactured from special steel, chosen for dimensional stability and improved wear resistance under frequent use. What nominal accuracy can be expected from the pins? The pins are produced with a nominal accuracy of 0.004 mm, supporting repeatable inspection results in precision workflows. Which applications suit this pin gauge set? This set is suited to fine mechanical assembly, toolmaking, connector inspection and any application requiring reliable micro‑diameter verification. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com