Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
135mm Setting Ring Form C Hardened Gauge Steel DIN 2250 / DIN 286 JS3 - Metav IndustryLine
Benefit from the combination of Form C geometry, hardened and lapped gauge steel and a JS 3 tolerance class to secure reproducible diameter checks in production and inspection; order the setting ring directly via Metav Werkzeuge or consult our specialists for application support. Setting ring 135 mm (DIN 2250) – hardened gauge steel by Metav IndustryLine The Setting ring 135 mm is a Form C ring gauge for accurate external diameter verification according to DIN standards, intended for workshop and inspection use. Form C ring gauge to DIN 2250 Hardened and lapped gauge steel JS 3 tolerance for tight accuracy Precise conformity to standards for reliable quality control The control geometry follows DIN 2250 and DIN 286, delivering the defined tolerance class JS 3 that underpins consistent pass/fail judgements on turned or ground diameters. Manufactured from hardened and lapped gauge steel, the component resists wear and preserves measuring faces even under frequent use, which reduces rework and inspection time. For production planners, this means lower scrap rates and repeatable measurement results that integrate directly into existing quality flows. Durable construction that eases handling and storage With a diameter of 135 mm and a solid mass of 4.5 kg, the ring is engineered to remain stable during verification tasks; the Form C profile simplifies fitting on shafts and fixtures while the lapped finish ensures a precise contact surface. The robust material choice provides long-term dimensional stability, so maintenance intervals are extended and tool rotation for replacement is minimised. A clearly marked SKU and GTIN support traceable inventory control in the store room. Built to support measured improvement in processes Using a hardened setting ring with defined tolerance reduces operator uncertainty and speeds up set‑up procedures at machine or gauge stations. The compact, standardised design is suitable for both bench inspection and integration into downstream control routines. The ring’s standards-based specification makes it straightforward to document measurement capability during audits and to align suppliers and subcontractors on a common verification benchmark. For tailored advice and reliable supply of the Metav IndustryLine setting ring M313.135, contact Metav Werkzeuge for application guidance and rapid delivery coordination. Technical Data Article number: M313.135 GTIN: 4054469121116 ECLASS: 21170104 Tariff number: 90173000 Facts Diameter: 135 mm Weight: 4.5 kg Special features Form C ring gauge Material: hardened and lapped gauge steel Standards: DIN 2250; DIN 286, JS 3 FAQ What tolerance class does this ring gauge meet? The setting ring meets the JS 3 tolerance class as specified by DIN 2250 and DIN 286, giving a tight manufacturing tolerance suitable for fine inspection tasks. Is the material suitable for repeated workshop use? Yes, the ring is made from hardened and lapped gauge steel, which provides excellent wear resistance and long-term dimensional stability for routine checks. Which applications are typical for a 135 mm Form C ring? Form C rings of this diameter are commonly used for external diameter verification on shafts, turned parts and for setting go/no‑go checks in both machine shops and quality departments. How is the product identified and tracked in inventory? The item is listed as SKU M313.135 with GTIN 4054469121116, enabling straightforward traceability and inventory management for Metav IndustryLine ring gauges. Does the ring require special mounting or fixturing? The Form C profile simplifies fitting to shafts and fixtures; standard workshop fixturing is normally sufficient for stable and repeatable measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
137.5 mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS3 - Metav IndustryLine
Take advantage of the combination of hardened, lapped gauge steel, precise JS 3 tolerance and a stable Form C design for reproducible setups and long service life. Order the setting ring directly via Metav Werkzeuge or consult our specialists for bespoke inspection requirements. Setting ring 137.5 mm (DIN 2250) — hardened gauge steel, Form C — Metav IndustryLine The Setting ring 137.5 mm is a hardened, lapped ring gauge for precise setting and verification of mandrels, fixtures and reference diameters in inspection and workshop environments. Hardened & lapped gauge steel Conforms to DIN 2250 and DIN 286 Form C geometry for stable seating High mass for enhanced dimensional stability Repeatable measurement and conformity for production control The ring gauge is manufactured to DIN 2250 and DIN 286 standards with a JS 3 tolerance class, enabling reliable repeatability in setting procedures and go/no‑go checks. The tight tolerance class provides a measurable baseline for process control and statistical inspection routines, reducing uncertainty during first‑article checks or routine machine setups. As a hardened reference component, the ring supports consistent calibration chains and traceable comparators in a quality system. Robust construction for long service life and minimal wear Made from hardened, lapped gauge steel, the component delivers superior wear resistance and stable seating during repeated use. The lapped finish ensures low surface roughness and precise contact geometry, which preserves the gauge’s nominal diameter over long duty cycles. The Form C profile improves support and centring on mandrels or spigots, and the unit’s mass contributes to thermal and mechanical stability during measurement operations, lowering the risk of transient errors. Practical use cases: inspection, setup and fixture verification Designed as a workshop and metrology tool, this ring gauge is suited to setting fixtures, verifying spindle runout with reference plugs and checking internal diameters against a calibrated standard. In production environments it shortens setup time by offering a ready reference that integrates into workflow sequences for machine alignment or tool presetting. The robust finish and standards conformity make the component apt for both shop‑floor use and controlled inspection rooms where reproducibility is required. Choose the Metav IndustryLine Setting ring for dependable reference diameters — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for further specification or ordering assistance Technical data SKU: M313.137.5 GTIN: 4054469121123 Diameter: 137.5 mm Weight: 3.8 kg Material: hardened and lapped gauge steel Standards: DIN 2250; DIN 286; JS 3 Form: Form C Tariff number: 90173000 Facts Diameter: 137.5 mm Weight: 3.8 kg GTIN: 4054469121123 Tariff number: 90173000 Special features Hardened and lapped gauge steel Form C geometry for stable seating Conforms to DIN 2250 and DIN 286 Tolerance class JS 3 FAQ What is the primary purpose of this ring gauge? The Setting ring 137.5 mm from Metav IndustryLine is intended for setting, checking and verifying mandrels, fixtures and reference diameters in inspection and workshop workflows. Which standards and tolerance class apply to the gauge? The device is manufactured to DIN 2250 and DIN 286 and is supplied within a JS 3 tolerance class, ensuring conformity for routine production checks. What material and surface treatment are used? The ring is made from hardened, lapped gauge steel; the hardening and lapping reduce wear and secure accurate seating over prolonged use. Is this gauge suitable for shop‑floor use or laboratory inspection? The construction and finish of the Metav IndustryLine ring gauge make it appropriate for both robust shop‑floor operations and controlled inspection routines where repeatability matters. How should the ring be stored to preserve accuracy? Store the ring in a dry, protected environment, avoid impact and contamination, and apply light corrosion protection if long‑term storage is required to maintain the lapped surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Setting Ring Form C Hardened Gauge Steel DIN 2250/DIN 286 JS3 - Metav IndustryLine
Take advantage of the combination of a compact 13 mm diameter, hardened and lapped gauge steel, and conformity to DIN standards for reliable reference measurements; order the setting ring directly via Metav Werkzeuge or ask our consultants for application advice. Setting ring 13 mm — gauge ring, DIN 2250, hardened gauge steel (Metav IndustryLine) The Setting ring 13 mm is a compact reference gauge designed for precise setting and inspection tasks in metrology and workshop environments, especially where small-diameter, repeatable reference points are required. Hardened and lapped gauge steel Conforms to DIN 2250 and DIN 286 Tolerance grade JS 3 for reference use Compact 13 mm diameter, Form C design Reduce measurement uncertainty with a stable reference Manufactured from hardened and lapped gauge steel, this ring provides a wear-resistant contact surface that supports reproducible reference measurements. Conformity to DIN 2250 and DIN 286 ensures the component is produced within recognised production and tolerance frameworks, while the JS 3 tolerance grade positions the ring as a reliable reference standard for routine checks and setting operations. The use of a lapped finishing process reduces local surface roughness and improves contact consistency, which translates into fewer alignment errors during repetitive tasks. Compact geometry for space-constrained set-ups The Form C configuration and 13 mm diameter make this ring particularly suitable where limited access or small bores are involved. Its compact format allows simple integration into bench-mounted fixtures or portable inspection rigs without compromising profile stiffness. As a setting aid, the ring serves to define a precise reference dimension for comparative gauges and verification tools, supporting efficient workflow in production control and inspection stations. Built for workshop longevity and traceable use Produced under the Metav IndustryLine label, the ring combines robust material selection with industry-standard production control, supporting long service life in demanding conditions. The traceable identification (GTIN included in the technical data) helps maintain inventory and quality records. For operators seeking straightforward, low-maintenance reference pieces, the hardened and lapped finish minimises dressing and routine servicing, while the compact form reduces handling complexity during frequent use. For traceable, workshop-ready reference measurements, choose the Metav IndustryLine setting ring and contact Metav Werkzeuge for specification support and prompt supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M313.013 GTIN: 4054469120515 Brand: Metav IndustryLine Form: C Standards: DIN 2250; DIN 286; JS 3 Core Data Diameter: 13 mm eCl@ss: 21170104 Customs tariff number: 90173000 Special features Material: gauge steel, hardened and lapped Category: gauges; measuring pins Intended use: reference and setting in inspection and workshop Design detail: Form C geometry FAQ What is the main application of this setting ring? The setting ring is intended as a compact reference standard for setting, checking and comparative measurement tasks in workshops and inspection areas, providing a stable dimensional datum for small-diameter arrangements. Which standards and tolerance grade apply to the ring? The component is manufactured to DIN 2250 and DIN 286 with tolerance grade JS 3, which denotes a close tolerance suitable for reference gauges and consistent inspection use. Can the setting ring be used for calibrating gauges and measuring instruments? Yes, the ring serves as a precise reference for setting and verifying comparative gauges and inspection fixtures; the SKU M313.013 identifies the Metav IndustryLine gauge for traceable documentation. How should the ring be cared for to preserve accuracy? Owing to its hardened and lapped surface, minimal maintenance is required; however, routine protection from corrosion, clean handling and storage in a dry environment will help maintain its contact quality and dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14 mm Gauge Ball Pair Hardened Chrome Steel 0.003 mm Accuracy, 0.00008 mm Diameter Tolerance - Metav IndustryLine
Combine >HRC 62 hardness with 0.003 mm accuracy to create a stable reference that reduces measurement uncertainty; the compact 14 mm diameter and tight diameter tolerance make this pair ideal for repeatable fixture set‑ups. Order the items directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Gauge ball pair M318.424 — 14 mm chrome steel, 0.003 mm accuracy (Metav IndustryLine) The gauge ball pair M318.424 is a hardened chrome‑steel reference sphere set for precision metrology, suited to calibration, fixture alignment and tactile probe checks in workshops and metrology labs 14 mm hardened chrome steel spheres Accuracy 0.003 mm for reference measurements Diameter tolerance ±0.00008 mm Supplied as a precision two‑piece set Reliable reference accuracy for repeatable results These precision spheres deliver a nominal accuracy of 0.003 mm, combined with a diameter tolerance of ±0.00008 mm, which reduces systematic error when used as reference artefacts. Such figures translate into measurable gains for quality control: probes, tactile sensors and optical systems obtain a consistent benchmark and deviations can be quantified more reliably. The extremely low surface roughness supports stable contact conditions, improving reproducibility in comparative and calibration routines. Hardened chrome‑steel construction for long service life Manufactured from hardened chrome steel with a hardness above HRC 62, the spheres resist wear and preserve geometry under repeated contact. This material choice ensures that the surface integrity stays intact through extensive use, so recalibration cycles are extended and maintenance intervals are reduced. The compact mass also minimises influence on delicate fixturing, while the robust finish avoids early degradation that would otherwise increase measurement uncertainty. Practical application and handling benefits Offered as a precision two‑piece set, the pair is adaptable to a range of workshop tasks: reference standards for CMMs, probe qualification, alignment of fixtures and comparative measurements against master gauges. The compact diameter and controlled roundness make them simple to integrate into inspection routines or into modular test rigs. For users seeking traceability and dependable repeatability, the spheres function as a small but essential part of a calibrated measurement chain; expert advice is available for integration into process control. For traceable reference standards and application guidance, contact Metav Werkzeuge to discuss the M318.424 and procurement options — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M318.424 GTIN: 4054469184128 Material: Chromstahl, gehärtet Diameter: 14 mm Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Set: 2 pieces Weight: 0.05 kg Hardness: >HRC 62 Surface roughness: 0.00001 Measured values Nominal diameter: 14 mm Nominal accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness Ra: 0.00001 Hardness: >HRC 62 Weight (set): 0.05 kg Special features Precision two‑piece gauge ball set Hardened chrome‑steel construction Suited for reference and fixture alignment Compact format for easy integration FAQ Are these spheres suitable for CMM calibration? Yes. The gauge ball pair M318.424 is designed as a precision reference suitable for use with CMM probing systems and tactile sensor qualification. What does the 0.003 mm accuracy mean in practice? It denotes the maximum expected deviation from the nominal geometry for the spheres, allowing the M318.424 pair to act as a reliable benchmark in comparative and calibration tasks. Is the material wear‑resistant for regular shop use? The hardened chrome‑steel composition with hardness above HRC 62 provides high wear resistance, helping the spheres retain their geometry during repeated contact operations. Can the spheres be used for probe repeatability tests? Yes, the controlled diameter and low surface roughness make the set well suited to probe repeatability and tactile sensor checks in both laboratory and production environments. What is included in the delivery? Delivery comprises a precision two‑piece gauge ball set (M318.424) with the stated dimensional and surface specifications Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14 mm Gauge Pin 50 mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the pin's combination of high geometric accuracy, compact 50 mm length and robust special steel construction for repeatable end‑size checks on the shop floor; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.E00 — 14.00 mm diameter, 50 mm length (Workshop version) The gauge pin 14.00 mm, 50 mm length is a single test pin designed for precise end‑size inspection and dimensional reference work in workshop and production environments. 14.00 mm ground diameter 50 mm length for recessed seats Tolerance ±0.002 mm for high repeatability Workshop version, durable construction Accuracy and repeatability for reliable end‑size inspection The M323.E00 gauge pin delivers a nominal diameter of 14.00 mm with a verified tolerance of ±0.002 mm, providing a dependable reference for acceptance checks and setting operations. Such close tolerance reduces measurement scatter when used as a master artefact or checking pin, supporting consistent pass/fail decisions on production lines. The compact geometry concentrates stiffness where it matters, so dimensional checks remain reproducible even with manual handling. Robust construction tailored to workshop use Manufactured from special steel, this single‑piece test pin combines dimensional stability with practical robustness required in everyday shop environments. The 50 mm length is chosen to access moderately deep bores and seats without compromising rigidity; the workshop version designation indicates a focus on durability and straightforward handling rather than delicate laboratory finishes. The overall design simplifies integration into bench checks, fixture validation and fixture set‑up tasks. Practical procurement and integration into quality workflows Supplied as an individual precision pin, the product suits use as a reference in master sets or for spot checks on components after machining. The compact form factor and clear nominal data make it straightforward to record in quality documentation and to order repetitively through established supply chains. Metav's European stock and quality filtering ensure fast availability and traceable fulfilment, supporting uninterrupted inspection routines and reliable inventory planning. Contact Metav Werkzeuge in Emmerich for application guidance or to arrange supply from our European quality stock Technical data SKU: M323.E00 GTIN: 4061905068591 Article: Gauge pin, single, 14.00 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 14.00 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: special steel Intended for end‑size checking Single test pin design FAQ What is the nominal diameter and tolerance of this pin? The gauge pin has a nominal diameter of 14.00 mm with a manufacturing tolerance of ±0.002 mm; this is specified for the M323.E00 test pin. For which inspection tasks is this pin suited? This single test pin is intended for end‑size inspection, seating checks and dimensional referencing of bores and recesses in workshop and production contexts. What material and length are provided? The M323.E00 is made from special steel and measures 50 mm in length, combining adequate reach with the stiffness required for repeatable checks. Can the pin be used as a master or setting artefact? Yes — the pin's tight tolerance and stable geometry make it suitable as a reference in master sets, bench checks or as a setting element for fixtures. How is the product supplied? The item is supplied as a single gauge pin (single‑piece configuration) under SKU M323.E00 for straightforward identification in procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14 mm Limit Gauge Ring Wear Measurement Side, Hardened Steel, DIN 7162 - Filetta
Take advantage of hardened steel construction and DIN 7162 conformity together with a built‑in wear allowance on the good side to secure fast, reliable in-process checks—order the limit plug gauge directly via Metav Werkzeuge or consult our specialists if required. Filetta limit plug gauge Ø14 mm – hardened steel, DIN 7162 The Filetta limit plug gauge serves as a compact go/no-go inspection tool for fast acceptance checks of internal diameters in production and quality control. Hardened steel for long service life DIN 7162-compliant tolerances Wear allowance on the good side Compact Ø14 mm inspection plug Reliable conformity checks for production lines Built for dependable pass/fail assessment, the limit plug gauge combines a simple acceptance principle with standardised dimensions to speed up inspection cycles. The Ø14 mm size suits common bore checks while the DIN 7162 alignment ensures measured dimensions match widely recognised tolerance tables. Using a standardised plug reduces interpretation time on the shop floor and contributes to a smoother production flow. Durability that keeps tools in service longer Manufactured from hardened steel, the gauge resists wear in continuous use and maintains measurement integrity over many cycles. The integrated wear allowance on the good side compensates for gradual abrasion and extends the effective service life before replacement is needed. The result is fewer tool changes, reduced downtime and predictable maintenance intervals for inspection equipment. Fast, unambiguous go/no-go inspection at the bench The plug’s geometry supports quick go/no-go decisions without elaborate setups, making it suitable for workstations, final inspection benches and rapid in-process checks. As a tactile verification tool it removes ambiguity: either the plug enters (go) or it does not (no-go). This simplicity helps standardise checks between operators and increases throughput while keeping quality consistent. Straightforward fit into quality management routines Compact and robust, the gauge integrates easily into existing test fixtures and inspection protocols, supporting traceable quality routines and consistent acceptance limits. Documentation of measured conformity becomes more reliable when using standard gauges, which simplifies audits and reduces the likelihood of customer rejections. The compact design also suits storage in inspection sets and is practical for mobile measuring trolleys. For rapid conformity checks and robust service life, request the Filetta limit plug gauge via Metav Werkzeuge for reliable delivery and targeted technical advice Technical data Article number: MS911.176 Designation: Limit plug gauge Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Facts Diameter: 14 mm Special features Wear allowance on the good side (Abnutzungsaufmaß der Gutseite) Hardened steel Categories: Gauges; Measuring pins FAQ What material is the gauge made from? The Filetta limit plug gauge is made from hardened steel for enhanced wear resistance and long service life. Which standard does this plug gauge comply with? Compliance is with DIN 7162; the Filetta limit plug gauge (SKU MS911.176) follows the standardised tolerancing specified there. What is the intended use for this gauge? Intended for quick go/no-go checks of internal diameters in production and inspection environments, the plug gauge supports rapid acceptance testing. How does the wear allowance affect inspection intervals? The wear allowance on the good side prolongs usable life by compensating for normal abrasion, reducing the frequency of replacements and scheduled downtime. Is this gauge suitable for use on the shop floor? Yes; the compact Ø14 mm size and robust construction make the gauge suitable for bench, mobile trolleys and fixture integration in workshop environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
14 mm Limit Plug Gauge DIN 2245 H7 Hardened Gauge Steel - Metav IndustryLine
The product data contains contradictory information: the declared weight values (0.2 kg vs 0.07 kg) conflict and quality flags indicate both reject and good status simultaneously. These inconsistencies make it challenging to determine the accurate specifications of the product. Without clarity on the correct weight and quality status, it becomes impossible to ensure the reliability of the information provided. A reliable product description cannot be generated from these inconsistent data, as it risks misleading potential users or buyers. Resolving these discrepancies is essential to create a trustworthy and accurate representation of the product for all stakeholders involved.
14 mm Limit Plug Gauge With Go Side Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Reliable, DIN‑compliant inspection for internal bores through a 14 mm hardened‑steel gauge pin with a designed wear allowance on the GO side, ensuring repeated pass/fail decisions remain reproducible; combine durability and standard conformity for consistent quality control. Order the limit plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit plug gauge MS911.218 — 14 mm hardened steel, DIN 7162 — Filetta The limit plug gauge MS911.218 is a DIN 7162‑compliant gauge pin designed for fast pass/fail inspection of internal bores in production and quality assurance environments. Hardened steel construction DIN 7162 14 mm nominal diameter gauge pin Wear allowance on the GO side Ensure decisive, repeatable go/no‑go checks on the shop floor A limit gauge pin like this delivers an immediate binary evaluation for bore acceptance, converting measurement into a clear production decision. Manufactured to DIN 7162, the pin provides a standardised reference, making it simple to compare results across shifts and machines. The hardened‑steel body maintains dimensional integrity under frequent use, while the wear allowance on the GO side extends service life without compromising the accuracy of rejection criteria. This reduces downtime caused by ambiguous results and supports faster throughput in quality control workflows. Robust construction that keeps inspection reliable over time The hardened‑steel construction resists deformation and surface damage, which helps maintain the declared nominal size of 14 mm through repeated cycles. The specified wear allowance is applied to the GO face to ensure that wear first affects the go tolerance before the no‑go limit, preserving measurement intent longer. Such design choices translate into fewer replacements, predictable maintenance intervals and lower total cost of ownership for inspection tooling in industrial environments. Conformity and traceability to support quality systems Built in accordance with DIN 7162, the gauge pin is suitable for integration into documented inspection plans and traceability chains. Using standardised limit gauges simplifies audit preparation and aligns measurements with recognised metrology practice. The simple go/no‑go principle reduces operator interpretation and supports consistent training outcomes—an advantage when multiple operators perform routine inspections on production lots. Practical handling and common applications Compact and robust, this gauge pin is primarily intended for direct checking of bore diameters in assembly, machining and incoming inspection. It works well on toolroom benches and in production control stations where quick verification is required. The pin’s geometry and finish enable smooth insertion into bores, and the hardened material ensures resistance to common shop contaminants. Where repeatability and fast decisions matter, this gauge pin offers a pragmatic balance of durability and simplicity. For traceable, DIN‑compliant inspection equipment, request the Filetta limit plug gauge MS911.218 via Metav Werkzeuge or contact our consultants in Emmerich for precise technical guidance. Technical data Article number: MS911.218 Product: Limit plug gauge (gauge pin) Brand: Filetta Nominal diameter: 14 mm Material: hardened steel Standard: DIN 7162 Special feature: wear allowance on GO side Core measurements Diameter: 14 mm Features and applications Suitable for pass/fail inspection of bores Category: gauge pins / measuring pins Durable, hardened‑steel construction Wear allowance increases service life FAQ What is the primary use of this gauge pin? The Filetta limit plug gauge MS911.218 is used for quick go/no‑go inspection of internal bores to determine acceptance or rejection on the shop floor. What material is the gauge made from and how durable is it? Manufactured from hardened steel, the gauge pin provides high wear resistance; the built‑in wear allowance on the GO side prolongs its effective service life. Is the gauge made to any standard? Yes, the gauge complies with DIN 7162, making it suitable for standardised inspection routines and documented quality procedures. Which nominal size does this article cover? This specific article covers a nominal diameter of 14 mm as marked on the product designation. Can this gauge pin be used in production line sampling? Yes, the robust construction and simple go/no‑go function make MS911.218 appropriate for rapid sampling and routine checks within production and incoming inspection operations. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
14 mm Setting Ring Form C Hardened Gauge Steel DIN 2250, DIN 286 JS3 - Metav IndustryLine
Benefit from precise, repeatable gauging with a hardened, lapped gauge steel construction and compliance with DIN 2250 / DIN 286 tolerance class JS 3; order the setting ring directly via Metav Werkzeuge or ask our consultants if needed. Setting ring 14 mm (Form C) — hardened gauge steel, DIN 2250, Metav IndustryLine Setting ring 14 mm for precise reference and calibration in dimensional inspection, designed to serve as a stable datum for bore gauges, measuring instruments and workshop calibration rigs. DIN 2250 / DIN 286 JS 3 tolerance Hardened and lapped gauge steel Form C geometry for precise seating 14 mm nominal diameter for calibration tasks Consistent conformity for dependable measurement Manufactured to DIN 2250 in conjunction with DIN 286 and specified to tolerance class JS 3, this setting ring provides a predictable reference dimension that supports reproducible inspection routines. Compliance with these standards reduces the variability introduced by reference artefacts and simplifies audit trails in quality systems. The standardised tolerance class means that the ring can be integrated into existing inspection chains as a certified reference, helping to lower rejection rates through reliable dimensional verification and enabling clearer pass/fail decisions at the shop floor. Durable material and surface treatment that preserves accuracy Made from hardened gauge steel and lapped to a fine contact finish, the ring resists wear and maintains form stability under regular use. The lapping process yields a high-quality bearing surface that improves repeatability when setting instruments or checking bores. The Form C geometry ensures accurate seating against mating components and minimises positional error during calibration. These material choices deliver long service life and reduce the need for frequent replacement, supporting continuous production with minimal downtime. Practical use in workshop and quality-control workflows The 14 mm nominal diameter positions this ring as a compact, easy-to-handle reference for calibration benches, comparator setups and routine shop checks. As a reference gauge, the ring assists in setting internal micrometers, verifying bore gauges and confirming instrument zero points to speed up inspection sequences. The compact design and standardised tolerance contribute to efficient throughput: fewer instrument adjustments, faster checks and clearer documentation for quality records. For integration into a traceable calibration programme, the ring functions as a simple, robust building block that complements more complex metrology equipment. For traceable calibration and robust shop-floor reference, specify the Metav IndustryLine setting ring — contact Metav Werkzeuge for advice and supply from our Emmerich facility. Technical Data Article number: M313.014 GTIN: 4054469120522 SKU: M313.014 eClass: 21170104 Tariff number: 90173000 Standard: DIN 2250; DIN 286; JS 3 Facts Nominal diameter: 14 mm Special feature: Form C Material: gauge steel, hardened and lapped Weight: not specified in source data Special features Hardened and lapped contact surfaces Form C seating geometry Designed as reference / setting ring Metav IndustryLine product family FAQ What tolerance class does the setting ring meet? The setting ring meets DIN 2250 and DIN 286 specifications and is produced to tolerance class JS 3, making it suitable as a standard reference in routine metrology tasks. Which material is used for the ring and why? The ring is manufactured from hardened, lapped gauge steel, chosen for wear resistance and surface quality to preserve dimensional stability over prolonged use. How is the 14 mm ring typically used in the workshop? The 14 mm setting ring is used as a reference for calibrating bore gauges, setting internal micrometers and verifying instrument zero points to streamline inspection workflows. Is this product suitable for traceable calibration programmes? Yes — the ring’s conformity to DIN 2250 / DIN 286 JS 3 makes it suitable as a traceable reference within documented calibration procedures. Can the ring be used to set go/no-go gauges or comparators? The ring functions as a precise datum for comparator fixturing and for setting go/no-go or measuring instruments where a stable internal diameter standard is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14-15mm Gauge Pin Set 101pcs 0.01mm Increments With Probe Holder, Special Steel In Case - Metav IndustryLine
Take advantage of the combination of micro-range precision, fine 0.01 mm graduations and robust special-steel construction for reliable bore inspection and gauge work; order the set directly via Metav Werkzeuge or consult our specialists for application advice. Pin gauge set, 101-piece — 14–15 mm, 0.01 mm increments (Metav IndustryLine) Pin gauge set for fast, repeatable inspection of bores and gauges in workshop quality control and production testing 101 pins covering 14–15 mm in 0.01 mm steps High repeatability with ±0.004 mm accuracy Pins made from special steel for wear resistance Integrated pin holder for organised handling Micro-range precision for routine inspection The Pin gauge set, 101-piece delivers a compact solution for short-range bore measurement and plug gauge tasks within the 14–15 mm span. With 0.01 mm increments across 101 pins, the set provides dense coverage for fine tolerance work; this density reduces interpolation and speeds up go/no-go checks. The specified accuracy ±0.004 mm underlines the set’s suitability for routine inspection tasks and dimensional verification in machine shops and tool rooms, ensuring reproducible results during repeated measurements. Durable construction for long-term shop use Pins are manufactured from special steel, chosen for dimensional stability and resistance to wear under frequent contact inspections. Each pin is supplied with a working length of 50 mm, offering sufficient engagement depth for typical bore and gauge checks while keeping handling straightforward. The set includes a pin holder for organised storage and quick selection during inspection sequences, reducing handling time and the risk of misplacement in a busy workshop environment. Practical efficiency and integration into QC workflows Designed as a micro-range gauge set, this collection supports rapid size selection and serial checking, which improves throughput in small-batch production and maintenance routines. The compact nature of the range minimises setup time compared with adjustable gauges and simplifies documentation of measured sizes. Where traceability or procurement consistency matters, the set’s configuration and repeatability integrate well into existing workshop quality-control procedures and inspection reports. Choose the Metav IndustryLine pin gauge set for dependable micro-range inspection and contact Metav Werkzeuge in Emmerich for specification matching or supply coordination. Technical data Article number: M318.584 GTIN: 4054469156217 EClass: 21170231 Facts Measurement range: 14.0–15.0 mm Minimum size: 14 mm Maximum size: 15 mm Step size: 0.01 mm Accuracy: 0.004 mm Pins per set: 101 Pin length: 50 mm Weight: 9.8 kg Special features Material: Special steel With pin holder Set configuration suitable for micro-range inspection Tariff number: 90173000 FAQ What range of sizes does the set cover? The set covers the 14–15 mm range in 0.01 mm increments, providing dense size steps for precise bore checks. What is the material of the pins and why does it matter? Pins are made from special steel, which offers dimensional stability and wear resistance for repeated inspection tasks. How many pins are included and what is their length? The package contains 101 pins, each with a working length of 50 mm, suitable for standard bore engagement depths. What level of accuracy can be expected from the set? The set is specified with an accuracy of ±0.004 mm, making it appropriate for routine precision checks in workshop quality control. Is the set suitable for go/no-go inspection procedures? Yes — the dense 0.01 mm spacing and repeatable dimensions make the collection practical for systematic go/no-go checks and stepwise verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.01mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact handling and robust workshop design to streamline end-measure checks and reduce rework. Order the gauge pin directly via Metav Werkzeuge or ask the Metav consultants for batch availability and application advice. Gauge pin M323.E01 (14.01 mm Ø, 50 mm length) — Metav IndustryLine A gauge pin M323.E01 for precise end-measure checks and setting work in workshop and inspection tasks, designed as a single, robust measuring pin for routine dimensional control. Workshop version for robust daily use Diameter 14.01 mm, precision ±0.002 mm Length 50 mm for stable handling Supplied in transport case Dependable accuracy for repeatable end-measure checks The single gauge pin is engineered for precision and repeatability in routine inspection tasks. With a nominal diameter of 14.01 mm and a stated tolerance of ±0.002 mm, this measuring pin offers a consistent reference for go/no-go checks and fine setting operations. The tight tolerance supports rapid decisions at the inspection bench and reduces downstream rework by ensuring that components meet dimensional requirements before assembly. The combination of nominal size and accuracy positions this pin as an effective tool for end-measure verification where narrow clearance and interference fits are involved. Built for everyday workshop handling and long service life Constructed from special steel, the pin combines surface hardness with corrosion resistance required in production environments. The 50 mm overall length gives comfortable handling and stable seating in fixtures, while the workshop specification emphasises durability under frequent use. Supplied in a protective transport case, the pin is protected during storage and transit, which preserves its measuring quality and minimises the need for premature replacement. The robust design therefore supports lower total cost of ownership through extended service intervals and fewer measurement-related interruptions. Practical integration into quality routines and fixtures As a compact measuring element, the gauge pin suits small-scale metrology and fine-mechanical tasks typical of the micro measurement segment (measurement range up to 10–100 mm). It functions well as a setting datum, reference plug for fixture alignment, or a manual go/no-go gauge when paired with visual or tactile inspection methods. The simple geometry makes the pin straightforward to use in jigs, bore checks and end-of-line inspections, offering a fast, rational solution to control tasks that demand both repeatability and ease of handling. Documentation such as GTIN and the clear SKU facilitates traceability within inventory and quality systems. Contact Metav Werkzeuge for batch availability, application guidance or technical matching of precision gauge pins — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.E01 Label: Prüfstift, einzeln, 14,01 mm Länge 50 mm GTIN: 4061905068607 Weight: 0.1 kg Facts Diameter: 14.01 mm Length: 50 mm Tolerance: ±0.002 mm Material: Special steel Special features Workshop version Supplied in transport case Category: Gauge pin / measuring pin Story trigger: end-measure checks FAQ What is the declared tolerance of the gauge pin and how does it affect inspection? The tolerance of ±0.002 mm ensures tight control when using the gauge pin M323.E01 as a reference; this level of precision reduces ambiguity in go/no-go checks and helps prevent assembly errors. Is the pin suitable for frequent workshop use? Yes, the workshop specification and special steel construction make the gauge pin robust enough for routine use and repeated seating in fixtures. Can this pin be used as a datum for fixture alignment? The 50 mm length and cylindrical geometry make the measuring pin suitable as a datum or setting reference in jigs and alignment fixtures for small components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.03mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-grade measuring solution that combines 14.03 mm nominal diameter, ±0.002 mm accuracy and robust special-steel construction to secure reproducible end‑dimension checks; order directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin M323.E03 – 14.03 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.E03 is a workshop‑grade measuring pin for end‑dimension checks and fixture set‑up in production and inspection tasks. Workshop‑grade design Diameter 14.03 mm precision Length 50 mm hardened shaft Accuracy ±0.002 mm Precision where reproducibility matters A compact measuring element that delivers repeatable results: the pin’s 14.03 mm nominal diameter and ±0.002 mm stated accuracy provide a measurable improvement in process control compared with routine shop gauges. Manufactured from special steel, the shaft resists bending and wear, which reduces measurement drift during repeated insertion checks. For end‑dimension verification and plug‑gauge reference points, this compact format supports fast, reliable decisions and fewer downstream reworks. Built for workshop handling and durability Designed as a workshop version, this measuring pin balances toughness with manageable weight (approx. 0.1 kg), so handling and fixture changes remain straightforward. The 50 mm length offers sufficient engagement for most assembly and inspection tasks while keeping the element rigid under normal use. Delivery boxed for transport protects the instrument between shifts and during storage, ensuring the hardened surface and calibration state remain intact until the next use. Practical integration and time savings on the shop floor Integration into routine inspection sequences is simple: the pin’s standard dimensions make it immediately compatible with gauges, jigs and fixture bores used in machining and assembly. Using a defined, traceable gauge reduces subjective judgement in go/no‑go checks and shortens inspection cycles — a clear operational benefit that supports higher throughput and consistent quality. Where nominal end dimensions are critical, the design helps to avoid costly rework and supports efficient process documentation. For consistent end‑dimension control with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for technical advice and availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.E03 GTIN: 4061905068621 SKU: M323.E03 Label: Prüfstift, einzeln, 14,03 mm Länge 50 mm Facts Diameter: 14.03 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Boxed for transport (plastic or wooden box) Application: End‑dimension checks FAQ What is the intended use for this gauge pin? The gauge pin M323.E03 (Metav IndustryLine measuring pin) is intended for repeatable end‑dimension checks, fixture set‑up and plug‑type verification in workshop and production environments. How precise is the measuring element? The measuring pin is supplied with an accuracy of ±0.002 mm, making it suitable for fine shop measurements where tight reproducibility is required. What material is the pin made from? The shaft is manufactured from special steel, chosen for wear resistance and dimensional stability under routine workshop conditions. Is the pin delivered ready for use and protected for transport? Yes; the product is delivered boxed for transport to protect the hardened surface and preserve measurement integrity during storage and handling. Can this pin be used with standard fixtures and gauges? The pin’s standardised diameter and length make it compatible with common fixtures, gauge blocks and jigs used for end‑dimension verification in machining and assembly Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.04mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Precision measurement with a workshop-grade gauge pin in special steel, offering a diameter of 14.04 mm and a repeatable tolerance of ±0.002 mm; supplied individually in a protective transport case. Benefit from reliable repeatability and robust handling for in-process checks — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.E04 — single gauge pin, Ø 14.04 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.E04 for quick dimensional verification and end‑measure checks in workshop and inspection settings Workshop-grade execution Diameter 14.04 mm, length 50 mm Accuracy ±0.002 mm Consistent accuracy for rapid inspection results The M323.E04 is engineered as a precision gauge pin for fast, repeatable dimensional checks where small tolerances matter. The specified ±0.002 mm tolerance ensures that measurements used for go/no‑go checks and alignment tasks remain consistent over repeated use, reducing rework and inspection time. The relatively compact 50 mm length and exact 14.04 mm diameter make this pin ideal for end‑measure verification, fixture set‑up and comparative testing in busy workshop processes where throughput and reliability are essential. Robust construction tuned to workshop conditions Manufactured from special steel, this single pin is finished for durability and stable performance under regular handling. The workshop-grade execution provides resistance to everyday knocks and abrasion without compromising measurement integrity. Supplied individually and packed in a protective transport case, the pin is kept secure during storage and transit, which helps maintain the measurement surface and preserves repeatability across measurement cycles. Practical applications and handling benefits This gauge pin suits quick dimensional checks, plug‑type verification and fixture alignment tasks commonly found in maintenance and production control. At a weight of approximately 0.1 kg, the pin balances easy manual handling with a solid feel at the point of inspection. Delivered as a single item, it integrates simply into existing inspection benches and pin sets, enabling straightforward replacement or targeted checks without the need for extensive tooling changes. Fit into quality workflows with minimal overhead For workshop and small‑series production, the pin offers a low‑effort way to uphold tolerances during assembly and machining operations. Its clear specification and compact format reduce decision time when selecting inspection aids, while the Metav IndustryLine designation signals consistent procurement and dependable stock availability from a central European quality filter. Using dedicated gauge pins for frequent checks supports traceable, auditable inspection routines and helps keep production moving with fewer interruptions. Contact Metav Werkzeuge for tailored advice on using the Metav IndustryLine gauge pin in specific inspection setups or to request immediate availability from our Emmerich warehouse, info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M323.E04 GTIN: 4061905068638 Label: Prüfstift, einzeln, 14,04 mm Länge 50 mm Facts Length: 50 mm Diameter: 14.04 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Supplied individually in a protective transport case Category: Gauge pins Storytrigger: end‑measure checks FAQ What inspection tasks is this gauge pin suitable for? This gauge pin (Metav IndustryLine gauge pin M323.E04) is suitable for end‑measure verification, plug‑type dimensional checks and fixture alignment in workshop and production control environments. Is the measurement tolerance suitable for precision assembly work? Yes, the specified tolerance of ±0.002 mm for the M323.E04 makes it suitable for precision assembly and quality control tasks that require tight repeatability. How is the pin supplied and protected during transport? The gauge pin is supplied individually and delivered in a protective case to preserve the measuring surface and ensure reliable repeatability after storage or transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.06mm Gauge Pin 50mm Length, Workshop Version, Special Steel ±0.002mm - Metav IndustryLine
Combining workshop-grade robustness, ±0.002 mm repeatability and a compact 50 mm length, this single gauge pin supports consistent fit and end‑dimension checks in production and inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice and integration options. Gauge pin M323.E06 — single gauge pin, 14.06 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin for precise fit and end‑dimension verification in workshop and inspection settings, presented in a resilient workshop design for regular use. Workshop version for robust everyday use Diameter 14.06 mm for precise fit checks Length 50 mm compact and easy to handle High accuracy ±0.002 mm for reliable checks Reduce rejects with measurable precision The compact design delivers a clear metrological advantage: a 14.06 mm nominal diameter combined with an accuracy of ±0.002 mm yields highly repeatable fit verifications and gauge comparisons. For routine inspection, the narrow tolerance band reduces ambiguity in acceptance decisions and shortens downstream rework cycles. The specified precision is especially beneficial where small clearances and press fits determine assembly quality; the result is fewer rejections and a more predictable production flow. Built for everyday workshop use and handling Designed as a workshop version, the pin balances durability with ease of handling. The special steel construction resists wear in repetitive use and maintains dimensional stability over many cycles, which supports consistent measurement results on the shop floor. The 50 mm length provides a practical grip and avoids excessive cantilever during insertion, making the pin straightforward to position in jigs, bores and assemblies. Delivered in a transport case, the item remains protected between shifts and during transport. Practical information for integration and inspection routines The single‑piece design simplifies inventory and replacement planning: the item is stocked under SKU M323.E06 and identified by GTIN 4061905065910 for traceable procurement. With a nominal diameter of 14.06 mm and a weight around 0.1 kg, the pin is easy to store and deploy in fixture sets or gauge kits. The straightforward geometry supports both manual checks and use as a reference pin in comparison tests, enabling standardised acceptance criteria across multiple stations. Contact Metav Werkzeuge for tailored workshop gauging and technical advice on integrating the Metav IndustryLine gauge pin M323.E06 into existing inspection processes Technical Data SKU: M323.E06 GTIN: 4061905065910 Brand: Metav IndustryLine Label: Gauge pin, single, 14.06 mm, length 50 mm Facts Diameter: 14.06 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop design Material: Special steel Delivered in transport case Single gauge pin FAQ What tolerance can be expected from this gauge pin? The Metav IndustryLine gauge pin M323.E06 is specified with an accuracy of ±0.002 mm, making it suitable for fine fit and end‑dimension checks where tight tolerances are required. Is the pin suitable for regular shop‑floor use? Yes. This workshop version is made from special steel and built for repetitive handling and insertion, offering durability for daily inspection routines. Can the pin be used in comparison checks and fixture testing? The straight, single‑piece geometry of SKU M323.E06 is ideal for fixed reference checks, comparative gauging and as a fixture plug for pass/fail assessments. How is the product supplied for storage and transport? The gauge pin is supplied protected in a transport case to prevent damage during storage and movement between workstations. Which identifier should be used for procurement and traceability? Use SKU M323.E06 or GTIN 4061905065910 for ordering and traceability within procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.07mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of workshop‑grade durability, ±0.002 mm accuracy and a compact 50 mm length to streamline fixture setting and end‑measure checks. Order directly via Metav Werkzeuge or contact our consultants for application advice and availability. Gauge Pin M323.E07 — 14.07 mm diameter, 50 mm length (Metav IndustryLine) The Gauge Pin M323.E07 is a single, workshop‑grade precision gauge pin designed for end‑measure verification, fixture setting and repeatable inspection tasks in production and maintenance environments. Workshop‑grade design for daily use Diameter 14.07 mm for end‑measure checks Length 50 mm for fixture and setting Tolerance ±0.002 mm for high repeatability Reliable accuracy for repeatable measurement results Built for applications where dimension control matters, this gauge pin delivers a specified deviation of ±0.002 mm, which supports tight process control and reduces downstream rework. The stated tolerance means that each pin conforms closely to its nominal diameter so that mating holes and gauge sets can be verified with confidence. For metrology and quality assurance tasks, the direct consequence is faster decision making: pass/fail checks become consistent and less dependent on operator judgement, improving throughput in inspection loops. Compact form factor that speeds up setup With a 14.07 mm diameter and a 50 mm length, the pin is sized to fit typical fixture seats and locating holes while remaining easy to handle. The special steel construction offers the rigidity needed for repeated seating without significant wear, and the modest mass supports swift insertion and removal during setup cycles. In everyday workshop use the compact dimensions reduce handling time and allow one–person operation for many tasks; the single‑item delivery suits selective replacement or bespoke gauge assemblies. Traceability, inventory and workshop compatibility Identified as M323.E07 and listed with GTIN 4061905066269, the pin integrates cleanly into parts lists and inventory systems. Its workshop specification highlights suitability for routine production environments rather than delicate laboratory contexts. The combination of clear labelling and robust construction simplifies stock management and lowers the risk of mismatching components in gauge blocks or fixture packs. For operations aiming to standardise tooling, the pin represents a precise, easy‑to‑store component for recurring measurement operations. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for personalised advice, stock information and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.E07 GTIN: 4061905066269 Manufacturer: Metav IndustryLine Label: Gauge Pin, single, 14.07 mm dia, 50 mm length Dimensional data Diameter: 14.07 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg ECLASS: 21170231 Special features Material: Special steel Workshop‑grade execution Category: Gauge pins Single item supply FAQ What measurement tolerance does this gauge pin offer? The M323.E07 gauge pin is specified with a tolerance of ±0.002 mm, providing high repeatability for end‑measure checks and gauge comparisons. For which tasks is this gauge pin suitable? This single gauge pin is intended for end‑measure verification, fixture setting and routine inspection tasks in workshop and production environments where robust, repeatable locating is required. What material is used and how does it affect durability? The pin is made from special steel, which provides the rigidity and wear resistance needed for frequent seating and handling in a workshop setting. How is the part identified for inventory and ordering? The product is listed as M323.E07 with GTIN 4061905066269, allowing clear identification in inventory systems and order lists. Is this gauge pin suitable for inclusion in a gauge set or fixture pack? Yes, the compact dimensions (14.07 mm × 50 mm) and workshop execution make the pin well suited for integration into gauge sets and fixture assemblies where consistent locating is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.08mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop‑grade construction, 14.08 mm diameter precision and a compact 50 mm length to secure repeatable end‑dimension checks and simple fixture alignment; order directly via Metav Werkzeuge or contact the consultants for specification advice. Gauge pin M323.E08 — 14.08 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.E08 is a workshop‑grade precision inspection pin designed for end‑dimension verification and alignment tasks in production and inspection environments. Workshop‑grade construction Diameter 14.08 mm precision Compact 50 mm overall length Accuracy ±0.002 mm Reliable inspection for tight tolerances The M323.E08 pin delivers ±0.002 mm tolerance, making it suitable where repeatable close‑fit checks are essential. As a hardened, single gauge pin it functions as a direct comparative standard for bore‑go/no‑go checks and end‑dimension verification, reducing ambiguity in the measurement chain. The quoted accuracy refers to the manufacturing tolerance of the pin itself and ensures that fits and clearances can be assessed with confidence in routine shop inspection and setup tasks. Durable workshop design for everyday handling Manufactured from special steel, this workshop edition is intended for frequent use in machining and assembly areas. The 50 mm length and compact profile allow secure seating in fixture holes and jigs while keeping handling straightforward. Robust material selection minimises wear over repeated insertions, so the component maintains its dimensional integrity across repeated cycles and supports longer intervals between replacement. Seamless integration into quality control workflows The pin is a single‑piece gauge that fits directly into inspection sequences and assembly checks; its simple geometry reduces interpretation time and speeds decision making on the shop floor. Traceability is supported by the SKU and GTIN, which helps with inventory control and batch documentation. Use of standard sizes such as 14.08 mm simplifies stockkeeping and ensures compatibility with common fixtures and gauges found in metalworking and inspection departments. Contact Metav Werkzeuge for detailed specification matching or to procure the Metav IndustryLine gauge pin M323.E08 for immediate inclusion in inspection routines Technical data SKU: M323.E08 GTIN: 4061905066900 Product: Gauge pin, single Label: Gauge pin, single, 14.08 mm, length 50 mm Facts Diameter: 14.08 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Version: Workshop edition Category: Gauge pins / Messstifte Story trigger: End dimensions FAQ What tolerance is specified for this gauge pin? The gauge pin M323.E08 is manufactured to an accuracy of ±0.002 mm, providing a stable reference for tight tolerance checks. For which inspection tasks is this pin suitable? This pin is intended for end‑dimension verification, bore checking and alignment tasks in machining and assembly workflows where a compact, durable reference is required. What material is the pin made from and how does that affect service life? The pin is made from special steel, chosen for wear resistance under regular insertion and handling, which helps preserve dimensional stability over repeated use. How is the product identified for inventory and traceability? Identification is via SKU M323.E08 and GTIN 4061905066900, which support purchasing, stock control and documentation processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.09mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise diameter control and robust workshop design to improve inspection throughput; combine the 14.09 mm diameter with a tight ±0.002 mm tolerance and stable 50 mm length for reproducible end‑measurements. Order via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.E09 — 14.09 mm diameter, 50 mm length (Metav IndustryLine) A Test pin M323.E09 intended for precision end‑measurement and inspection tasks in workshops and quality control stations. Workshop‑grade special steel construction Diameter 14.09 mm with ±0.002 mm tolerance 50 mm length for stable probing Supplied in protective transport box Accurate diameter control for reliable inspection This gauge pin delivers a 14.09 mm nominal diameter with a verified ±0.002 mm variation, making it suitable for tight tolerance checks and final‑dimension inspection. The declared tolerance supports reproducible plug‑gauging and pass/fail checks, reducing rework and inspection time. For teams performing frequent end measurements, the narrow variance translates directly into fewer false rejects and steadier process capability. Built for routine workshop use and handling Constructed from special steel and presented as a workshop version, the pin combines material resilience with a compact 50 mm shaft that eases handling and positioning in fixtures. The modest mass supports quick manual operations while the length provides sufficient engagement for stable probing and repeatable seating in jigs. Delivered in a protective transport box, the item is protected during storage and transit, helping maintain surface quality and dimensional integrity. Simple integration into quality workflows Identified as a single test pin with SKU M323.E09 and GTIN 4061905066917, the component slots easily into inspection kits and fixture sets. Traceable identification simplifies stock management and replacement planning in production lines. Backed by Metav IndustryLine’s emphasis on accessible precision, the piece benefits from a supplier network that prioritises consistent availability and clear product information for industrial purchasers. Speak with Metav Werkzeuge for tailored advice on using the Metav IndustryLine test pin M323.E09 in existing inspection routines; contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and ordering assistance Technical Data Article number: M323.E09 GTIN: 4061905066917 Label: Test pin, single, 14.09 mm diameter, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 14.09 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Supplied in protective transport box Category: Gauge pins FAQ What level of dimensional accuracy does the pin offer? The test pin M323.E09 is specified with a tolerance of ±0.002 mm, suitable for tight end‑measurement and precision gauging operations. Is the pin suitable for fixture or jig use in production environments? Yes, the 50 mm length and workshop‑grade construction make the gauge pin well suited for repeated seating in fixtures and jigs during production checks. How is the item supplied to preserve its condition? The product is supplied in a protective transport box to minimise damage during handling and storage and to keep the measuring surface in good condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.11mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
High-repeatability end measurements are achieved by combining a 14.11 mm diameter with a ±0.002 mm tolerance and a robust special steel construction; the single-piece design and 50 mm length suit routine workshop verification and fixture checks. Order the test pin directly via Metav Werkzeuge or consult the Metav specialists for application advice. Test pin, single, 14.11 mm × 50 mm — workshop-grade gauge pin by Metav IndustryLine with ±0.002 mm tolerance A single test pin designed for precise end-measurement, fixture verification and plug-gauge reference tasks in workshop metrology. Workshop-grade construction Diameter exactly 14.11 mm Length 50 mm for stable handling Tolerance ±0.002 mm Repeatable end measurements for production control The compact gauge pin provides a strictly defined reference for end measurements and plug-gauge checks, enabling consistent results across repeated inspections. With a nominal diameter of 14.11 mm and a stated tolerance of ±0.002 mm, the pin functions as a reliable dimensional standard for component end faces and bores. The special steel material offers the stiffness required to minimise elastic deformation during contact, so measurements remain reproducible even under frequent use. This precision orientation supports efficient quality control and shortens inspection lead times by reducing rework cycles. Robust workshop design that stays ready for use Designed as a workshop version, the pin balances handling comfort with mechanical integrity. The 50 mm overall length provides sufficient contact area for stable seating in fixtures while remaining compact enough for single-handed positioning; the unit weight of 0.10 kg contributes to a solid feel without unnecessary bulk. Delivered as a single item, the pin is suitable for direct integration into manual inspection routines, assembly jigs and reference sets. The hardwearing surface of the special steel resists everyday wear and ensures long-term dimensional stability, reducing the need for frequent replacement. Practical applications and system integration This gauge pin is intended for end-measurement tasks, reference checks in assembly fixtures and use as a master plug in plug-gauge comparisons. Its nominal diameter and tolerance make it appropriate for verifying mating parts, locating bores and confirming end positions where a precise cylindrical datum is required. The single-piece configuration supports straightforward handling in measuring benches and control stations, and the clear specification simplifies procurement and documentation for quality systems. For batch inspections, the pin can be used alongside production gauges to validate tool settings and machine outputs. For workshop-grade repeatability rely on Metav IndustryLine components; contact Metav Werkzeuge for tailored advice and procurement assistance. Technical data Article number: M323.E11 GTIN: 4061905066931 Manufacturer: Metav IndustryLine Key figures Diameter: 14.11 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Delivery: single test pin Suitable for end-measurement and plug-gauge reference Workshop version for routine inspection FAQ What is the exact diameter and tolerance of the gauge pin? The gauge pin has a nominal diameter of 14.11 mm and a tolerance of ±0.002 mm, specified for high-repeatability end measurements. Is the pin supplied as an individual unit or in sets? This item is supplied as a single test pin (SKU M323.E11) suitable for direct use in fixtures and verification workflows. What material is used for the pin and why is it relevant? The pin is made from special steel, chosen for its stiffness and wear resistance to maintain dimensional stability under regular contact. Can this pin be used for plug-gauge checks and fixture locating? Yes, the geometry and tolerance are intended for plug-gauge comparisons, fixture verification and locating tasks where a precise cylindrical datum is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.12mm Gauge Pin Length 50mm Workshop Version, Steel Case - Metav IndustryLine
Take advantage of precise end‑size control and robust workshop construction: the gauge pin combines a 14.12 mm calibrated diameter with ±0.002 mm accuracy and a 50 mm working length for reliable, repeatable checks; order directly via Metav Werkzeuge or contact the team for advice. Gauge pin, single, 14.12 mm diameter, 50 mm length — Metav IndustryLine The gauge pin, single, 14.12 mm diameter, 50 mm length is a compact test pin for fast end‑size inspection, alignment and go/no‑go checks in toolrooms and production environments. 14.12 mm precision diameter ±0.002 mm high accuracy Workshop‑grade special steel Precision that reduces rework and speeds inspection A high‑resolution diameter of 14.12 mm combined with a verified ±0.002 mm tolerance gives a clear, quantifiable basis for acceptance decisions. This level of accuracy minimises rework and scrap by ensuring that mating parts and bores are checked with repeatable results; the fine tolerance is especially valuable where small deviations cause assembly problems. The pin’s specification supports quick pass/fail assessments in quality control routines, which reduces cycle time and keeps production flowing. Robust construction for everyday workshop use Manufactured from special steel and finished as a workshop‑grade tool, the pin withstands routine handling and frequent insertion into gauges and fixtures. With a 50 mm overall length and compact profile, the test pin is easy to position and to store alongside inspection kits, while its low mass aids quick manoeuvring during series checks. The design balances stiffness and handling so that the operator can perform rapid measurements without introducing sag or unwanted deflection. Practical integration and traceable identification The single test pin simplifies inventory and tool‑setting procedures: it is supplied as an individual gauge with clear identification (SKU M323.E12) and a global trade item number for procurement. Using a dedicated, standardised pin for end‑size checks reduces setup complexity across different machines and fixtures, and the clear technical specification supports documented quality workflows. For applications that demand fast, objective go/no‑go decisions, this precision pin integrates easily into established inspection stations and QA documentation. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for supply and expert advice at info@metav-werkzeuge.com or +49 2822 7131930, and ensure the right gauge pin is selected for the task. Technical data Article number: M323.E12 GTIN: 4061905066948 SKU: M323.E12 Description: Single gauge pin, diameter 14.12 mm, length 50 mm Facts Diameter: 14.12 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Measurement range: 14.12 mm Eclass: 21170231 FAQ What is the primary use of this gauge pin? The gauge pin is intended for end‑size inspection and quick go/no‑go checks; the gauge pin (M323.E12) is suitable for verifying bore diameters, alignment and fit during setup and quality control. How precise is the pin for dimensional verification? The test pin provides a ±0.002 mm accuracy rating, offering a high degree of dimensional reliability for critical inspection tasks. Which materials is the pin compatible with when checking parts? The pin itself is made of special steel and is used to measure components irrespective of the part material; it checks physical dimensions rather than machining compatibility. Is the gauge pin suitable for repeated workshop use? Yes, the workshop‑grade construction is designed for frequent handling and routine checks in production and toolroom environments. How is the item referenced for procurement and documentation? Procure and document the part using SKU M323.E12 and GTIN 4061905066948 to ensure consistent replacement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.13mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high dimensional accuracy, robust special‑steel construction, and compact workshop design for reliable fit checks and repeatable end‑dimension verification. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin, single, Ø 14.13 mm – length 50 mm (Metav IndustryLine) The gauge pin, single, 14.13 mm is a precision probe for end‑dimension checks and bore verification in workshop and inspection routines. Workshop design for everyday inspection Diameter 14.13 mm for precision fit checks Length 50 mm for bore and depth access Special steel construction, accuracy ±0.002 mm Precision where end dimensions matter This compact inspection element delivers ±0.002 mm dimensional consistency, making it suitable for verification of final tolerances and tight fits. The 14.13 mm diameter is manufactured to narrow tolerances to support pass/fail checks and plug‑gauge style applications. Because the component is produced in a workshop specification, it balances repeatability with durability, allowing quality teams to rely on stable readings during routine production sampling. The special steel construction provides a hardwearing contact surface that helps maintain gauge integrity under regular use. Designed for practical workshop use With a 50 mm length and a low mass of approximately 0.1 kg, this single gauge element is easy to handle and to insert into bores or fixtures without upsetting the measured part. The straightforward form factor supports quick checks in assembly, jig set‑up and incoming inspection, reducing process interruptions. The workshop version is optimised for practical handling and repeated contact; the material choice and machining quality reduce wear and support consistent measurement cycles in a production environment. Benefits for process control and traceability Using a stable reference like this pin improves first‑pass yield and shortens inspection times by providing an unambiguous, repeatable check for mating parts and end dimensions. Integrating such a reference into documentation and inspection plans supports traceable quality control and clearer go/no‑go decisions on the shop floor. Sourcing through Metav IndustryLine ensures access to a broad range of compatible measuring aids and a dependable supply chain centred in Emmerich, which helps to keep measurement capability available where it matters most. Request the Metav IndustryLine gauge pin (M323.E13) via Metav Werkzeuge for robust end‑dimension checks and dependable workshop performance Technical data Article number: M323.E13 GTIN: 4061905066955 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 14,13 mm Länge 50 mm Core dimensions Diameter: 14.13 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Materials and features Material: Special steel Version: Workshop design Item type: Single gauge pin Typical application: End‑dimension checks and fit verification FAQ What tolerance does this gauge pin provide? The product is specified with a dimensional tolerance of ±0.002 mm, shown in the technical data for the Metav IndustryLine gauge pin M323.E13. What materials is the pin made from? The gauge pin is manufactured from special steel, chosen to provide a durable contact surface suitable for routine fit and bore checks. Is this item suitable for bore and depth verification? Yes, the combination of 14.13 mm diameter and 50 mm length makes the pin suitable for bore checks and for verifying end dimensions in assemblies and fixtures. Is the product supplied individually or as a set? This article is supplied as a single gauge pin; the designation M323.E13 denotes the individual test pin rather than a matched kit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.14mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of high repeatability, compact dimensions and workshop‑grade construction to streamline fixture checks and end‑dimension verification. Order the test pin directly via Metav Werkzeuge or consult the sales team for application advice and fast supply. M323.E14 — Metav IndustryLine gauge pin (Ø 14.14 mm, 50 mm length) The M323.E14 is a single gauge pin for precise end‑dimension checks and fixture alignment in workshop environments Workshop version, robust construction Diameter 14.14 mm for precise end measurements Length 50 mm compact for fixture checking Tolerance ±0.002 mm for high repeatability Consistent dimensional accuracy that reduces rework The M323.E14 gauge pin offers a declared tolerance of ±0.002 mm, which represents a level of repeatability suited to demanding workshop and quality‑control tasks. Such precision narrows measurement scatter and reduces the need for iterative rework, making inspection steps more predictable. In practical terms, the fine tolerance helps to detect marginal deviations in bores and seating surfaces early, so production flow and assembly reliability benefit from fewer interruptions. Compact geometry for quick fixture and end‑mass verification With a diameter of 14.14 mm and a length of 50 mm, this test pin is sized to reach tight bores and to serve as a reference mandrel for quick alignment checks. The compact dimensions reduce handling effort and allow a single operator to perform repeatable checks on jigs and workholding without cumbersome tooling. The modest mass contributes to easy positioning, while the short length minimises deflection and preserves measurement integrity. Workshop‑grade material and a specification built for daily use Made from special steel and presented in a workshop execution, the pin is designed for repeated contact and robust handling typical of production environments. Supplied individually, the component is suitable for use as a standalone reference or as part of a set of gauge pins for stepwise checking. The construction prioritises wear resistance and dimensional stability, so calibration intervals can be predictable and inventory turnover reduced. For dependable workshop precision choose the Metav IndustryLine M323.E14 gauge pin — contact Metav Werkzeuge in Emmerich for specification guidance and reliable delivery: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: M323.E14 GTIN: 4061905067815 Brand: Metav IndustryLine Numbers / Core technical data Diameter: 14.14 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Design / Special features Material: Special steel Workshop version Supplied individually Intended use: end‑dimension and fixture checks FAQ What level of accuracy can be expected from this gauge pin? The M323.E14 gauge pin is specified with a tolerance of ±0.002 mm, providing high repeatability for workshop inspections and end‑dimension checks. Is the material suitable for regular workshop use? Yes, the pin is manufactured from special steel and specified as a workshop version, offering wear resistance and dimensional stability under typical handling conditions. Can this pin be used for aligning workholding and fixtures? The Ø 14.14 mm diameter and 50 mm length make this test pin appropriate for fixture alignment and quick mandrel‑type checks in jigs and clamping setups. Is the product supplied individually or as part of a set? This article is supplied individually; the packaging and delivery reflect a single gauge pin intended for immediate use or inclusion in a custom set. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.15mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, Calibrated Delivery in Case - Metav IndustryLine
Take advantage of the combination of 14.15 mm diameter, ±0.002 mm tolerance and a 50 mm length for reliable end‑dimension checks; the workshop‑grade construction and supplied transport case ensure safe handling and repeatable results. Order the test pin directly via Metav Werkzeuge or consult our advisors for application support. M323.E15 — Test pin (14.15 mm Ø, 50 mm length) by Metav IndustryLine The M323.E15 test pin is a workshop‑grade gauge pin for fast end‑dimension verification and fixture alignment in machining and quality control environments. Workshop-grade construction Diameter 14.15 mm, length 50 mm Dimensional tolerance ±0.002 mm Supplied in transport case High precision where small tolerances matter The M323.E15 is manufactured for consistent metrology tasks, combining a tight dimensional tolerance of ±0.002 mm with a nominal diameter of 14.15 mm and a usable length of 50 mm. This combination supports reliable go/no‑go checks and reference measurements in production and setup, reducing rework and inspection time. The workshop‑grade finish balances durability with the fine edge control needed for repeated contact measurements, while the compact form factor keeps handling straightforward on the bench or in a fixture. Designed for micro‑scale inspection and fixture verification Classified in the micro category (measuring range within 10–100 mm), this gauge pin is ideal for fine‑mechanical applications and small assemblies where stiffness and minimal deflection are crucial. The solid construction and special steel material give the pin a stable contact surface for end‑dimension checks, alignment of sockets and quick verification of locating features. In practice, the component acts as a precise reference for jigs, gauges and calibration routines, enabling faster setup and more predictable production runs. Robust handling and storage for workshop use The single test pin is supplied in a protective transport case, which protects the measuring end and simplifies storage between shifts. At a mass of approximately 0.1 kg and a compact length, the gauge pin is easy to handle and position in fixtures while maintaining the rigidity required for reproducible results. The workshop specification ensures resilience to everyday handling; routine visual inspection and proper case storage preserve accuracy over time and support consistent quality assurance workflows. For procurement, specification checks or application advice relating to the Metav IndustryLine M323.E15 test pin, contact Metav Werkzeuge GmbH directly by phone +49 2822 7131930 or email info@metav-werkzeuge.com — Metav’s advisers can assist with selection and delivery. Technical data Article number: M323.E15 GTIN: 4061905067822 Brand: Metav IndustryLine Description: Test pin, single, 14.15 mm diameter, 50 mm length Facts Weight: 0.1 kg Length: 50 mm Diameter: 14.15 mm Tolerance: ±0.002 mm Measuring range min: 14.15 mm Measuring range max: 14.15 mm Special features Workshop‑grade version Material: Special steel Supplied in transport case Single test pin for end‑dimension checks Category: Gauge pin (Messstifte) FAQ What is the M323.E15 most commonly used for? The M323.E15 test pin is used for end‑dimension verification, fixture alignment and quick go/no‑go checks on small components and assemblies. Does the M323.E15 come with a calibration certificate? No ISO 17025 calibration is indicated for this item; the M323.E15 is supplied as a workshop‑grade gauge pin without an ISO 17025 certificate. What material is the pin made from? The gauge pin is manufactured from special steel, providing a durable contact surface suitable for repeated measuring tasks. Is the M323.E15 suitable for precision measuring of micro parts? Yes, with a tolerance of ±0.002 mm and a diameter of 14.15 mm, the pin is classified in the micro range and is suitable for fine mechanical inspection and small‑part verification. How is the pin protected during transport and storage? The M323.E15 is supplied in a protective transport case to safeguard the measuring ends and simplify storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.16 mm Gauge Pin Plain Shaft 50 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, exact ±0.002 mm tolerance and compact 50 mm length for reliable end‑dimension checks in daily production. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration advice. Gauge pin, single, Ø 14.16 mm, 50 mm length (Metav IndustryLine) The Gauge pin, single, Ø 14.16 mm, 50 mm length is a compact, workshop‑grade cylindrical master designed for quick and repeatable end‑dimension verification in workshop and fixture environments. Workshop‑grade finish for rugged use Diameter tolerance ±0.002 mm Supplied in transport box for protection Precision where it matters for routine checks The compact cylindrical master delivers repeatable measurement capability thanks to a diameter of 14.16 mm held to ±0.002 mm. Such tolerance class positions the pin among high‑precision workshop gauges suitable for end‑dimension inspection and go/no‑go references; the tight specification reduces measurement uncertainty and supports consistent assembly and quality decisions. Classified in the micro range (10–100 mm measurement span), this size combines stiffness and accessibility, making it particularly apt for detailed tasks where small deviations affect fit and function. Built to withstand everyday workshop handling Produced in special steel with a workshop‑grade finish, the pin is resistant to wear during repeated seating and release in checks and fixtures. The 50 mm length gives a stable contact area while remaining easy to handle at the bench. Delivery in a protective transport box preserves the gauge geometry during transport and storage, reducing downtime for inspection teams. The robust construction translates to fewer replacements and predictable service life, supporting leaner inventory and steady production flow. Practical integration into inspection routines The single gauge pin functions as a precise master for end‑dimension testing, fixture setting and verification of mating bores. Its compact form factor simplifies insertion into jigs and test stands and allows straightforward reference checks during setup or batch sampling. Traceability is supported by clear identification (SKU and GTIN), while the simple geometry makes the pin compatible with manual and semi‑automatic inspection procedures, aiding rapid decisions on part conformity and process control. For workshop reliability with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich to discuss availability and integration of this gauge pin into current measurement routines Technical data SKU: M323.E16 GTIN: 4061905067839 Label: Gauge pin, single, Ø 14.16 mm, 50 mm length Manufacturer: Metav IndustryLine Core measurements Diameter: 14.16 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Features & applications Material: Special steel Workshop version Category: Gauge pins Supplied in transport box for transport protection ECLASS: 21170231 FAQ What tolerance does this gauge pin provide? The gauge pin is specified with a diameter tolerance of ±0.002 mm, making the Metav IndustryLine pin suitable for high‑precision workshop checks. Is this size suitable for fine mechanical work? Yes, the 14.16 mm diameter and 50 mm length place the pin in the micro classification (10–100 mm), offering the stiffness and control needed for fine mechanical and fixture tasks. What material is used for the gauge pin? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions. Is the gauge pin supplied protected for transport? Yes, the product is supplied in a transport box to protect the pin geometry during shipment and storage. Can the pin be used as a reference in assembly fixtures? The pin functions well as a master for end‑dimension verification and as a reference element in fixtures and go/no‑go checks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.17mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of workshop-grade robustness combined with tight dimensional control: the 14.17 mm diameter and ±0.002 mm tolerance ensure reliable end‑dimension checks, while the 50 mm length and special steel construction deliver long service life; order directly via Metav Werkzeuge or consult our advisors for integration into inspection sets. Gauge pin, single — Ø 14.17 mm / 50 mm length (Metav IndustryLine) The gauge pin, single, 14.17 mm length 50 mm is a workshop‑grade inspection pin for fast end‑dimension verification, fixture setting and component gauging in metalworking environments. Workshop version Precision Ø 14.17 mm Length 50 mm Tolerance ±0.002 mm Consistent dimensional control for efficient inspection A compact inspection pin designed for repetitive end‑dimension checks, the pin provides repeatable accuracy thanks to its tight ±0.002 mm tolerance and precise diameter of 14.17 mm. This level of control reduces rework and speeds up quality checks in production sequences, making measurement results comparable across shifts and operators. The numerical specification enables straightforward inclusion in inspection protocols and statistical process control, supporting faster decision‑making and fewer production interruptions. Robust workshop construction that withstands everyday use Built as a workshop version from special steel, the pin balances hardness with wear resistance to tolerate daily handling and contact with machined components. The 50 mm length offers a solid gripping area and easy handling while remaining compact for fixture work or placement in gauge blocks and test jigs. Delivered in a transport case for secure storage and transit, the unit reduces the risk of damage in workshop environments and keeps the measuring asset protected between uses. Practical integration and traceability for measurement workflows Marked with SKU M323.E17 and GTIN 4061905067846, the pin is ready for inventory management and traceable procurement. As a single inspection element it fits into modular gauge sets or can be used standalone for quick go/no‑go checks and alignment tasks on assemblies. The combination of precise diameter control and workshop durability supports consistent setup of fixtures, making the pin a time‑saving component in both repair benches and production lines. Metav’s emphasis on reliable European supply further underpins availability and consistent quality for repeat purchases. For workshop‑grade inspection needs, contact Metav Werkzeuge to request the Metav IndustryLine M323.E17 gauge pin and discuss stocking or set integration from our Emmerich warehouse — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.E17 GTIN: 4061905067846 Label: Prüfstift, einzeln, 14,17 mm Länge 50 mm Category: Gauge pins Facts Diameter: 14.17 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Delivered in transport case FAQ What is the intended use of this gauge pin? The M323.E17 gauge pin is intended for end‑dimension verification, fixture setting and quick go/no‑go checks in workshop and production environments. Which material is the pin made from and why does that matter? The pin is made from special steel, chosen for a balance of hardness and wear resistance that preserves dimensional stability over repeated use. Is the tolerance suitable for precision production tasks? With a tolerance of ±0.002 mm, the pin meets demanding workshop inspection requirements and supports consistent measurement routines. Does the product come ready for storage and transport? Yes, the pin is delivered in a transport case to protect the measuring surface and simplify handling between jobs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com