Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
13.78mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Compact workshop-grade pin in special steel with ±0.002 mm tolerance and 13.78 mm diameter for reliable end‑dimension checks; the 50 mm length offers secure reach into recesses. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 13.78 mm — 50 mm length (Metav IndustryLine) The Gauge pin, single, 13.78 mm, length 50 mm is a workshop‑grade verification pin designed for precise end‑measure and fit checks in metalworking. Workshop version for robust use Diameter 13.78 mm for precise fitting Length 50 mm for deep reach Tolerance ±0.002 mm for high accuracy Built for dependable workshop verification Made for everyday workshop environments, this inspection pin combines a workshop version design with a special steel construction to resist wear during repeated insertion and withdrawal. The compact profile minimises handling effort while maintaining rigidity, so checks on shafts, bores and assembled components remain reproducible. With this configuration, traceable checks and routine in‑process inspections become straightforward, supporting faster decision‑making on the shop floor and reducing downtime caused by uncertain fits. Precision that reduces rejects and rework The manufacturing tolerance of ±0.002 mm places this pin in a high‑precision category suitable for stringent fit verification; the figure describes the maximum deviation from nominal diameter under standard inspection. Using a gauge with this tolerance improves first‑pass yield by ensuring mating parts meet design allowances before assembly. The 13.78 mm diameter provides a defined reference for limit and clearance testing, translating measurement certainty into fewer rejects and lower rework costs. Practical handling and integration into quality routines At 50 mm length the pin reaches into deeper features without sacrificing control, making it suitable for inline checks and bench measurement tasks. Supplied as a single, ready‑to‑use item, the profile is simple to handle and quick to deploy in go/no‑go procedures or comparison tests. The robust material and workshop finish support repeated use, while the compact format fits tool trays and inspection kits, easing storage and ensuring the pin is available exactly where and when it is needed. Choose the Metav IndustryLine gauge pin for reliable workshop measurement and contact Metav Werkzeuge in Emmerich for personalised technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.D78 GTIN: 4061905066214 Manufacturer: Metav IndustryLine Material: Special steel Weight: 0.1 kg Core specifications Diameter: 13.78 mm Length: 50 mm Tolerance: ±0.002 mm Special features Workshop version Single pin delivery Compact, rigid profile FAQ What tolerance does this gauge pin offer? The gauge pin from Metav IndustryLine is manufactured to a tolerance of ±0.002 mm, enabling high‑precision fit and end‑measure checks. Which material is the pin made from? This inspection pin is produced in special steel, chosen for wear resistance and suitability for frequent workshop use. Is the pin supplied individually or as part of a set? The item is supplied as a single gauge pin under SKU M323.D78, intended for immediate integration into inspection kits. What are the exact dimensions for verification tasks? The pin measures 13.78 mm in diameter and 50 mm in length, providing defined reference geometry for bore and shaft checks. Can this pin be used for end‑dimension and fit control? Yes, the design and accuracy of the Metav IndustryLine gauge pin make it suitable for end‑dimension and fit verification on assembled or individual components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.79mm Gauge Pin Length 50mm Workshop Version, Stainless Special Steel - Metav IndustryLine
Compact precision with a 13.79 mm diameter, ±0.002 mm accuracy and a 50 mm length ensures reliable end‑dimension checks in routine inspection tasks. Benefit from the robust workshop design and proven material choice for consistent measuring results — order the M323.D79 via Metav Werkzeuge or consult our specialists for application support. Gauge pin, single, 13.79 mm × 50 mm (Metav IndustryLine) Gauge pin, single, 13.79 mm × 50 mm is a precision inspection pin designed for accurate end‑dimension verification and go/no‑go checks in workshop and inspection environments. Workshop design for robust use Diameter 13.79 mm, length 50 mm High accuracy ±0.002 mm Made from special steel Precision that secures production decisions The inspection pin delivers repeatable results thanks to a tight tolerance of ±0.002 mm, making it suitable for fine end‑dimension verification where small deviations matter. A nominal diameter of 13.79 mm combined with a defined 50 mm shank length provides a stable reference when inspecting bores, fittings or turned parts. This level of precision supports fast pass/fail decisions and reduces uncertainty in quality control workflows, which in turn minimises rework and production delays. Workshop suitability and everyday handling benefits Engineered as a workshop design, the pin tolerates the demands of regular use while remaining straightforward to handle; the overall mass of 0.1 kg helps with quick manual positioning without fatigue. Constructed from special steel, the pin offers mechanical resilience appropriate for frequent contact with component edges and fixture seats. Supplied as a single unit, it simplifies inventory management for smaller toolrooms and enables selective replacement of worn gauges without affecting entire sets. Integration into inspection routines and supplier trust The component is ready to be incorporated into existing inspection benches, fixture arrays and measuring jigs, helping standardise checks across production lines. Labelling and traceability are supported via the SKU and GTIN in the technical data, easing documentation for incoming inspection or final release steps. Backed by Metav IndustryLine, the item benefits from a supplier network focused on making precision accessible to workshops of every size, reinforcing dependable supply and consistent product quality. Contact Metav Werkzeuge in Emmerich for procurement and technical advice on the M323.D79 inspection pin or request a tailored quotation at info@metav-werkzeuge.com Technical data Article number: M323.D79 GTIN: 4061905066221 Weight: 0.1 kg Material: Special steel Label: Prüfstift, einzeln, 13,79 mm Länge 50 mm Dimensions & accuracy Diameter: 13.79 mm Length: 50 mm Measurement range min: 13.79 mm Measurement range max: 13.79 mm Tolerance/Accuracy: ±0.002 mm Features & application Workshop design Single inspection pin delivery Suitable for end‑dimension checks Category: Gauge pins FAQ What level of accuracy does this inspection pin provide? The M323.D79 gauge pin is specified to an accuracy of ±0.002 mm, offering reliable repeatability for end‑dimension checks. Which materials is the pin made from? The pin is made from special steel, selected for mechanical durability in repetitive inspection tasks. Is the gauge pin delivered as part of a set or individually? This item is supplied as a single inspection pin; the single‑unit delivery simplifies selective replacement. Can the pin be used for go/no‑go testing on turned parts? Yes, the M323.D79 inspection pin is suitable for go/no‑go checks and end‑dimension verification on turned components and fitted assemblies. How is traceability handled for the part? Traceability is supported via the SKU M323.D79 and GTIN 4061905066221, which assist documentation and inventory control Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.7mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from workshop-grade robustness, Special steel construction and ±0.002 mm repeatability for reliable end‑dimension checks; the compact Ø 13.7 mm profile and 50 mm length support precise placement in gauges and fixtures. Order the probe pin directly via Metav Werkzeuge or consult our specialists if needed. Probe pin, single Ø 13.7 mm, L 50 mm (M323.D70) — Metav IndustryLine workshop probe pin Probe pin, single Ø 13.7 mm, L 50 mm engineered for precise end‑dimension verification and gauge applications in workshop and production environments Workshop‑grade execution Special steel, wear‑resistant High repeatability ±0.002 mm Length 50 mm for deep measurements Reliable metrology for end‑size checks This workshop probe delivers high repeatability (±0.002 mm) in a compact form factor, making it suitable for routine end‑dimension verification on production lines and during in‑process inspection. The special steel construction offers enhanced wear resistance compared with standard tool steels, reducing profile change over prolonged cycles and preserving measurement integrity. Designed for straightforward integration into comparative gauges and fixed fixtures, the component supports reproducible results that speed up decision cycles and reduce scrap rates. Compact design that fits tooling and gauges With a nominal diameter of Ø 13.7 mm and an overall length of 50 mm, this single probe pin falls into the Mikro measurement class (max range 10–100 mm), which is ideal where stiffness, repeatability and compactness matter. The short, rigid profile simplifies handling during fixture mounting and minimises bending error during touch‑off operations. Supplied as an individual item, the pin is intended for use in end‑measure assemblies and gauge blocks where exact contact geometry and limited overhang are prerequisites for reliable readings. Practical workshop features and handling benefits The workshop execution emphasises durability and low maintenance: the Special steel material and compact geometry lower the frequency of replacements and downtime. For transport and protection the item is supplied in a dedicated transport case, which helps preserve the contact surface during storage and transit. Light in weight at approximately 0.1 kg, the component is easy to position in small fixtures yet substantial enough to provide stable contact forces for manual and semi‑automated measurement routines. Contact Metav Werkzeuge today to request application advice or to order the M323.D70 probe pin directly from our Emmerich stock and benefit from expert guidance for integration into gauges and fixtures Technical data SKU: M323.D70 GTIN: 4061905069055 Manufacturer: Metav IndustryLine Numbers / Core technical data Diameter: 13.7 mm Length: 50 mm Accuracy / repeatability: ±0.002 mm Weight: 0.1 kg Special features / Versions Material: Special steel Workshop execution Supplied as single probe pin Delivered in transport case FAQ What applications suit this probe pin best? The M323.D70 probe pin is intended for end‑dimension verification, gauge inserts and fixed fixture use where a compact, stiff contact element is required. Is the probe pin supplied calibrated? This particular listing does not state a factory calibration standard; the M323.D70 is supplied in workshop execution with protective case for transport. What material is the pin made from and how does that help? Made from Special steel, the pin offers improved wear resistance and stability compared with basic steels, extending lifetime in frequent contact applications. Can the pin be used in automated test rigs or only manual gauges? The pin’s stiff geometry and compact mass make the M323.D70 suitable for both manual gauges and semi‑automated test rigs where stable contact and minimal deflection are required. How is the product identified for order and traceability? Order and trace the item using SKU M323.D70 and GTIN 4061905069055 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.81mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop‑grade test pin that combines tight tolerance (±0.002 mm) with robust special‑steel construction for repeatable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask the consultants for tailored advice. Gauge pin M323.D81 — Single test pin, Ø 13.81 mm, 50 mm length (Metav IndustryLine) The Gauge pin, single, 13.81 mm, length 50 mm serves as a hardwearing, precise reference for end‑measure inspections and fit verification in workshop and production environments. Workshop‑grade construction Diameter 13.81 mm, length 50 mm Tolerance ±0.002 mm for precise fits Special steel for long service life Accurate fits for repeatable inspection results This single test pin is engineered for precision checks where repeatability matters. With a nominal diameter of 13.81 mm and a documented tolerance of ±0.002 mm, the pin provides a measurable basis for go/no‑go assessments, fixture setting and assembly verification. The quoted tolerance level places the component in a category suitable for tight tolerance work commonly found in jigs, gauges and final‑dimension controls; this reduces rework and shortens inspection cycles by delivering consistent, verifiable results. Robust workshop design that withstands daily use Made from special steel and produced in a workshop version, the pin balances surface hardness with corrosion resistance to endure repeated insertion and contact with mating parts. The 50 mm length makes it compact and easy to handle within toolrooms and on the shop floor, while the solid construction avoids deformation under normal use. These characteristics translate into lower maintenance effort and predictable wear behaviour, supporting steady production throughput. Practical compatibility and typical applications Designed as a single gauge pin for end‑dimension and fit checks, this test pin is suitable for insertion into locating bushes, alignment fixtures and comparator set‑ups. It functions well as a reference for small‑batch quality control, prototype validation and routine incoming‑inspection tasks. The modest mass and compact format allow easy integration into existing gauge sets or bespoke fixtures, helping to maintain consistent reference standards across multiple workstations. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for product advice and assured supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.D81 GTIN: 4061905066696 Brand: Metav IndustryLine Category: Gauge pins Label: Gauge pin, single, 13.81 mm, length 50 mm Facts Diameter: 13.81 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Accuracy specification: ±0.002 Special features Workshop‑grade execution Material: special steel Single test pin configuration Intended for end‑dimension checks FAQ What applications are suitable for this gauge pin? The gauge pin M323.D81 is intended for end‑dimension checks, fixture set‑up, insertion into locating bushes and fit verification in workshop and production environments. What level of precision can be expected from this pin? With a tolerance of ±0.002 mm, the pin offers tight‑fit accuracy suitable for high‑repeatability checks and precision assembly support. What is the pin made from and is it durable? The pin is manufactured from special steel in a workshop‑grade execution, providing wear resistance and stable performance under typical shop‑floor use. Is the item supplied as a single piece or in sets? This entry refers to a single test pin supplied individually for flexible use in custom gauge arrangements and inspections. Can the pin be used with existing gauge sets and fixtures? Yes; the pin’s nominal diameter and compact length make it compatible with common locating bushes, fixture pockets and comparator set‑ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.82mm Gauge Pin, Single, 50mm Length, Special Steel, Workshop Version - Metav IndustryLine
Take advantage of precise fit control and workshop-ready robustness: the combination of high repeatability (±0.002 mm) and durable special steel supports consistent inspection routines and minimal rejects. Order directly via Metav Werkzeuge or consult our specialists for batch requirements. Gauge pin M323.D82 — single precision pin, 13.82 mm diameter, 50 mm length (Metav IndustryLine) A single gauge pin designed for dimensional verification and go/no‑go fit checks in workshop and production environments, offering tight tolerance and a compact 50 mm length for deep-seat inspections Workshop-grade single gauge pin 13.82 mm Length 50 mm for deep-seat checks Tolerance ±0.002 mm for tight fits Made from special steel for durability Consistent fit control for production and inspection A compact inspection pin made to secure reproducible fit checks and minimise rework. The 13.82 mm diameter is held to a tolerance of ±0.002 mm, which reduces uncertainty in go/no‑go assessments and supports repeatable quality gates on assembly lines. The tight specification helps to detect marginal clearances early, improving first-pass yield and reducing downstream corrective work. The design is optimised for rapid staging in jigs and fixtures, enabling efficient throughput without compromising measurement integrity. Durable workshop design that endures daily use Built in a workshop-grade execution and manufactured from special steel, this single pin resists wear under frequent handling and contact with mating parts. The 50 mm length provides access for recessed bore checks while keeping the tool manageable for one-handed operation at the bench. Surface finishing and material selection focus on long service life, so change‑out intervals are extended and tooling costs per part are lowered. The robust construction also means fewer replacements, supporting a steadier production rhythm. Practical applications and traceable precision Ideal for dimensional spot checks, fixture validation and gauging benches, the pin suits both small-scale inspection tasks and regular in‑process controls. Marked and traceable as part number M323.D82, the component integrates easily into existing inspection workflows and documentation. Its repeatability supports statistical process control routines and helps to verify tool wear or part deformation. For procurement and logistics, the GTIN is provided for unambiguous stock handling and batch tracking. Contact Metav Werkzeuge for delivery options and technical advice on using the Metav IndustryLine gauge pin M323.D82 in series inspection setups — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.D82 GTIN: 4061905066702 Manufacturer: Metav IndustryLine Material: Special steel Length: 50 mm Diameter: 13.82 mm Tolerance: ±0.002 mm Weight: 0.1 kg SKU: M323.D82 Core measurements Diameter (nominal): 13.82 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Single gauge pin for fit checks Traceable article number M323.D82 Delivered as a single unit FAQ What tasks is this gauge pin best suited for? The gauge pin M323.D82 is intended for dimensional verification, go/no‑go checks and fixture validation where a 13.82 mm diameter reference is required; it is particularly useful for deep‑seat bore inspections thanks to its 50 mm length. How precise is the inspection using this pin? Precision is specified at ±0.002 mm, which makes the pin appropriate for tight fit assessments and repeatable in‑process checks within workshop and light production environments. What material is used and how does that affect durability? Manufactured from special steel, the pin offers enhanced wear resistance for frequent use; the material choice supports longer service life under normal workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.83mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Reliable end-measure control with a precise 13.83 mm diameter, a tight ±0.002 mm tolerance and a robust special steel body — order this test pin directly via Metav Werkzeuge or consult our specialists if further application guidance is required. Test pin (single) 13.83 mm Ø, 50 mm length — Metav IndustryLine The Test pin (single) 13.83 mm Ø, 50 mm length is a workshop-grade end-measure pin designed for precise dimensional checks on small components and assembly fixtures. Workshop-grade construction Diameter precision ±0.002 mm Special steel for wear resistance 50 mm overall length Repeatable results for end measurements The compact probe delivers consistent results thanks to its defined 13.83 mm diameter and industrial tolerance of ±0.002 mm, which together support reliable go/no‑go checks and comparative gauging. In routine inspection tasks the dimensional certainty reduces rework and machine downtime, providing measurable process benefits. The design is aimed at tasks that demand tight repeatability rather than broad-range versatility. Robust build for shopfloor use Manufactured from special steel, the pin resists wear during frequent engagement with mating parts and retains dimensional stability under typical workshop conditions. The 50 mm overall length offers sufficient reach for many fixture and end‑face checks while remaining easy to handle and store. The workshop execution emphasises durability and straightforward maintenance for continuous use in production environments. Compact size tailored for micro applications With a measuring range fixed at 13.83 mm, this pin falls into the micro category of precision gauges, making it suitable for fine mechanical work where space and stiffness matter. That compact footprint benefits precision tasks such as end‑face verification on small shafts, insert checks or final control of turned components, where long gauges would compromise stability. Practical handling and traceable identification The single‑piece construction keeps the geometry simple and repeatable; labelling and a clear SKU ensure traceability through inventory and quality records. The test pin is offered as a clear option for workshops that require a simple, precise reference for end measurements and small‑part inspection. Confidence in repeatable measurement contributes directly to reliable production output and fewer rejects. For application advice or to specify the Test pin M323.D83 for a particular inspection routine, contact Metav Werkzeuge for expert guidance and fast supply. Technical data SKU: M323.D83 GTIN: 4061905066719 Brand: Metav IndustryLine Facts Diameter: 13.83 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Category: Test pins Intended use: end measurements FAQ Is the diameter of the pin guaranteed to 13.83 mm? The diameter is specified as 13.83 mm with a manufacturing tolerance of ±0.002 mm, allowing precise end‑measurement checks with repeatable results. What applications suit this test pin? This single test pin is ideal for micro‑scale end measurements, small shaft verification and final inspection of turned components where a compact, rigid reference is required. Can the pin be used in automated fixtures? Yes, the pin’s defined diameter and robust material make it suitable as a fixed reference in assembly or checking fixtures; verify fixture mounting and alignment for best repeatability. Is the material corrosion resistant? The pin is made from special steel chosen for wear resistance; for corrosive environments, additional surface protection or a corrosion‑resistant specification should be considered. How is the test pin identified in stock and documentation? The item is listed under SKU M323.D83 and GTIN 4061905066719 for clear traceability in quality records and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.84mm Test Pin, 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Compact combination of precision and robustness: the single gauge pin Ø13.84 mm, 50 mm length delivers tight tolerances and workshop‑ready durability with an accuracy of ±0.002 mm. Benefit from reproducible end‑measure checks and reduced rework rates; order the part directly via Metav Werkzeuge or consult the Emmerich team for application advice. Gauge pin, single, Ø13.84 mm, 50 mm — Metav IndustryLine A single gauge pin Ø13.84 mm, 50 mm length engineered for precise end‑measurement checks and routine inspection tasks in workshop environments. Workshop execution Diameter Ø13.84 mm for precise fit High precision ±0.002 mm Precision that keeps inspection reliable This compact measuring element is built to deliver consistent results in serial checks and setup procedures. With an indicated accuracy of ±0.002 mm, the pin supports repeatable end‑measure verification and minimises uncertainty in go/no‑go comparisons. The combination of tight tolerance and a defined Ø13.84 mm diameter helps stabilise fit in fixtures and gauges, translating into fewer adjustment cycles and a steadier production flow. Robust construction for everyday workshop use Manufactured from special steel, the component resists wear and maintains geometry under frequent handling. The 50 mm length provides enough engagement for stable contact while remaining compact for tight assemblies; its low mass (approximately 0.1 kg) eases handling and reduces the risk of accidental deflection during manual placement. Classified within the micro range of measuring tools, this item is especially suited to fine mechanical work where space is limited but accuracy remains critical. Practical application and process benefits Designed for use in end‑measurement tasks and small‑part inspection, the pin integrates smoothly into existing inspection routines and fixture setups. As a single measuring element it is flexible for spot checks, incoming part verification or as a reference in bespoke test jigs. The workshop‑grade execution supports long service intervals, lowering downtime for replacements. For tailored application tips or compatibility checks, the Metav Werkzeuge specialists can advise on fixture integration and handling best practice. Contact Metav Werkzeuge today for advice on application and delivery of the Metav IndustryLine gauge pin M323.D84 to ensure the correct end‑measurement solution for the workshop. Technical Data Article number: M323.D84 GTIN: 4061905066726 ECLASS: 21170231 Label: Gauge pin, single, Ø13.84 mm, 50 mm Facts Diameter: 13.84 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Messbereich max: 13.84 mm Special features Workshop execution Material: Special steel Category: Gauge pins (Messstifte) Intended use: End‑measure checks FAQ What tolerance can be expected from this gauge pin? The gauge pin (Metav IndustryLine M323.D84) is specified with an accuracy of ±0.002 mm, suitable for precise end‑measurement and repeatable inspection tasks. What material is used and how durable is it? This Metav IndustryLine test pin is made from special steel, providing robust wear resistance for routine workshop use while keeping dimensional stability over time. For which measuring range is the pin suitable? With a diameter of 13.84 mm and a compact 50 mm length, the pin falls into the micro measuring category (10–100 mm), making it ideal for fine mechanical components and confined inspection setups. Can the pin be used in fixture or jig applications? Yes. The single gauge pin is designed for integration into fixtures and jigs for end‑measure verification and spot checks; Metav Werkzeuge can advise on fixture compatibility for specific applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.85mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-grade gauge pin that combines a precisely ground diameter of 13.85 mm with a stable 50 mm length and a tolerance of ±0.002 mm for repeatable end-measure checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application-specific recommendations and supply options. Gauge pin, single — 13.85 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single, 13.85 mm, length 50 mm is a workshop‑grade precision pin for end‑measure verification and fixture alignment in metalworking and inspection environments Diameter 13.85 mm precision Length 50 mm workshop pin Tolerance ±0.002 mm high accuracy Made from special steel Precision where it matters This single‑piece gauge pin is manufactured for reproducible dimension checks: a nominal diameter of 13.85 mm and a measured length of 50 mm provide a stable reference for bore and component end‑dimension verification. The specified tolerance of ±0.002 mm signals a high‑precision tool suited to close‑tolerance inspection tasks and in‑process checks. In practice, that level of accuracy reduces measurement uncertainty and supports consistent assembly and setup procedures, making it an efficient part of quality control routines. Robust workshop design for reliable handling Designed as a workshop edition, the pin is produced from special steel to ensure a hard, wear‑resistant contact surface under regular use. The compact geometry and modest mass contribute to easy handling during quick go/no‑go checks or when assembling pin stacks and test fixtures. The construction suits repetitive operations common in machining and maintenance environments, where physical robustness and stable reference geometry are decisive for long‑term repeatability. Practical integration and traceable identification As a single gauge element, the pin integrates smoothly into test benches, alignment procedures and dimensional sampling plans; it functions as a fixed standard for end measurements and setting tasks. The product is supplied with a clear SKU (M323.D85) and GTIN for traceability and stock control, simplifying inventory management for production or metrology departments. Use this pin to support standardised routines that reduce setup time and improve process stability. For dependable end‑measurement references, request the Metav IndustryLine gauge pin M323.D85 from Metav Werkzeuge — technical advice and order processing are available from Metav Werkzeuge to match the tool to application needs Technical Data Article number: M323.D85 GTIN: 4061905066733 Manufacturer: Metav IndustryLine Facts Diameter: 13.85 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop edition Category: Gauge pins FAQ What is this pin best used for in a workshop environment? The gauge pin M323.D85 (Metav IndustryLine gauge pin) is ideal for end‑dimension checks, fixture alignment and sampling tasks where a precise reference diameter and length improve setup repeatability. How precise is the diameter and what does the tolerance mean? The diameter is 13.85 mm with a tolerance of ±0.002 mm; this means the pin provides a high‑accuracy reference that helps reduce measurement uncertainty in close‑tolerance inspections. Which materials is the pin suited to check or set up for? As a reference standard, the pin is material‑agnostic in application; it is used to verify dimensions of components made from metals and assemblies where a fixed external reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.86mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Accurate hole inspection and straightforward pass/fail checks are achieved by the combination of tight dimensional tolerance and robust special-steel construction; order the pin directly via Metav Werkzeuge or consult their advisors for matching sets and accessories. Gauge pin, 13.86 mm (length 50 mm) — Metav IndustryLine, workshop version The gauge pin, 13.86 mm (length 50 mm) is a hardened inspection pin for precise verification of bore diameters and reference measurements in production and quality control. Workshop-grade design for shop use Special steel for robust wear resistance Tolerance ±0.002 mm for precise inspection 50 mm length for deeper hole checks Ensure reliable pass/fail inspection with micrometric accuracy A single inspection pin like this provides a clear, repeatable criterion for bore acceptance. The ±0.002 mm dimensional tolerance minimises measurement uncertainty, enabling faster decision-making on the production line and reducing rework. Used as a go/no-go reference or as a master for comparative checks, the pin shortens inspection cycles while preserving traceability and reproducibility. Built for the workshop: durability and simple handling Designed as a workshop execution, the pin combines a compact geometry with a special steel composition that resists wear under frequent use. The 50 mm length offers access to deeper bores without sacrificing stiffness. Supplied as a single unit in a protective transport case, this tool is ready for everyday shop-floor use and robust enough to withstand handling during fixture setup and routine inspections. Practical application and integration into inspection routines This precision inspection pin is ideal for quick verification of internal diameters, alignment checks and positioning aids in jigs and fixtures. The compact mass (approx. 0.1 kg) and standardised diameter of 13.86 mm make it compatible with common pin holders and comparator fixtures. For flexibility, it can be combined with other pins or sets to form a custom reference kit tailored to specific production tolerances. Choose the Metav IndustryLine gauge pin via Metav Werkzeuge for dependable shop-floor inspection — contact Metav Werkzeuge for help selecting complementary sizes and securing consistent measuring routines Technical data Article number: M323.D86 GTIN: 4061905066740 Label: Gauge pin, single, 13.86 mm, length 50 mm Facts Diameter: 13.86 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop execution Supplied in a protective plastic or wooden case for transport FAQ What tolerance does the gauge pin offer? The pin is specified with a tolerance of ±0.002 mm for high-precision inspection tasks and dimensional verification. Is this pin suitable for shop-floor inspections? Yes — the workshop-grade design and special-steel construction make the pin suitable for regular use on the production floor. Can the pin be used for deeper bores and stepped holes? The 50 mm length is intended for deeper bore checks and can assist in stepped-bore verification when used with appropriate fixturing. Is a calibration certificate supplied with the product? A calibration certificate is not specified in the provided product data for this item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.87mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine workshop-grade durability, a precise 13.87 mm diameter and a tight tolerance of ±0.002 mm for reliable end‑dimension checks; order this gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 13.87 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single — 13.87 mm Ø, 50 mm length is a workshop-grade inspection pin intended for accurate end‑size verification and repeatable fit testing in production and quality control environments Precision tolerance ±0.002 mm Exact 13.87 mm diameter for end‑dimension checks 50 mm length in special steel for workshop use Supplied in a transport case for safe handling Industry-grade precision for repeatable measurements The inspection pin delivers high repeatability through its tight nominal tolerance of ±0.002 mm, making it suitable where small deviations affect assembly or sealing performance. By pairing a defined nominal diameter with a compact 50 mm shank, the component simplifies end‑dimension verification and go/no‑go comparisons on fixtures and gauges. The close tolerance reduces measurement uncertainty during frequent checks and supports faster decision cycles on the shop floor, translating technical specification into measurable production reliability. Robust construction and practical handling in the workshop Manufactured from special steel and finished for routine use, this single gauge pin balances durability with manageable handling. The 50 mm length provides sufficient engagement for stable seating in bores or reference fixtures while remaining short enough to limit bending or misalignment during manual positioning. Supplied in a transport case, the pin is protected against handling damage and contamination, which helps to preserve the calibrated form and extends service life in busy environments where tools are moved between workstations. Where this inspection pin adds measurable value Use this plug‑style inspection pin for end‑size control, assembly verification, and template checking where a precise, non‑complex reference is required. The 13.87 mm nominal diameter is well suited to tasks such as bore go/no‑go checks, gauge setting and comparative fits against mating parts. Because the design is single and uncluttered, the pin integrates smoothly into fixture arrays, test benches and manual inspection routines, allowing technicians to speed up throughput without compromising on traceability of measurement outcomes. Practical details for procurement and workshop integration The item is delivered ready for use in a protective transport case and is traceable via its SKU and GTIN for stock management and reorder planning. Lightweight at approximately 0.1 kg, it is easy to handle during repeated checks and quick sampling. The workshop configuration emphasises serviceability and daily reliability rather than laboratory‑only performance, making it a pragmatic choice for maintenance shops, small series production and quality departments that require consistent end‑dimension references. For precision checks with Metav IndustryLine quality—contact Metav Werkzeuge in Emmerich for supply and technical guidance on integrating the 13.87 mm gauge pin into existing inspection routines Technical data SKU: M323.D87 GTIN: 4061905066757 Label: Prüfstift, einzeln, 13,87 mm Länge 50 mm Brand: Metav IndustryLine Material: Special steel Weight: 0.1 kg Length: 50 mm Diameter: 13.87 mm Tolerance: ±0.002 mm Facts Diameter: 13.87 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm GTIN: 4061905066757 Special features Workshop version Special steel construction Supplied in a transport case Category: gauge pins Single, plain inspection pin design FAQ What are the exact dimensions and tolerance of this gauge pin? The gauge pin has a diameter of 13.87 mm, a length of 50 mm, and a tolerance of ±0.002 mm. What material is used for the inspection pin? The Metav IndustryLine inspection pin is made from special steel, specified for workshop durability and routine use. Is the pin suitable for repeated end‑dimension checks in production? Yes, the 13.87 mm gauge pin is designed for repetitive end‑size verification and fixture checking in workshop and production environments. How is the item delivered to protect the precision surface? The gauge pin is supplied in a transport case to protect the finished surface during handling and storage. What identifier should be used for stock control and reorders? Use SKU M323.D87 and GTIN 4061905066757 for inventory and procurement processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.88mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Taking advantage of high concentric accuracy and robust construction ensures reliable go/no‑go checks and long service life; combine ±0.002 mm tolerance with the compact 13.88 mm diameter and order directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin, 13.88 mm — Single test pin, 50 mm length (Metav IndustryLine) The gauge pin, 13.88 mm is a single precision test pin designed for end‑measure checks, alignment tasks and workshop inspection where compact, repeatable gauging is required. Diameter 13.88 mm for precise fit Length 50 mm workshop version Tolerance ±0.002 mm high repeatability Made from special steel for durability Reliable fits through tight tolerances The compact measuring pin provides a 13.88 mm nominal diameter with a verified ±0.002 mm geometric tolerance, enabling high repeatability in pass/fail checks and controlled assembly trials. For fixtures and plug‑gauges the controlled diameter reduces uncertainty during changeover and minimises rework, while the tight tolerance supports interchangeability between measuring points and production batches. Robust construction for workshop environments Manufactured in Special steel and offered in a workshop version, the pin is hardened and finished for wear resistance under frequent handling. The 50 mm length gives a stable engagement depth for typical end‑measure applications while remaining compact enough for tight jigs and test stands. The material choice and finish lower surface wear and preserve the nominal diameter across repeated use, extending service intervals. Practical integration in inspection workflows Delivered as a single unit with clear identification, this measuring pin suits spot checks, assembly verification and comparative gauging in production. The light mass aids rapid handling and reduces fixture load; traceable marking assists process documentation and inventory control. When used alongside fixed gauges or modular test blocks the pin streamlines throughput and supports consistent quality decisions on the shop floor. For workshop inspections requiring compact, high‑precision pins from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for specification checks and supply options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.D88 GTIN: 4061905066764 Manufacturer: Metav IndustryLine Facts Diameter: 13.88 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Delivery: single piece Label: Prüfstift, einzeln, 13,88 mm Länge 50 mm FAQ What materials is the pin suitable for? The gauge pin from Metav IndustryLine is made of special steel and is suited to general workshop inspection tasks and gauging applications where steel pins are appropriate. Is the diameter guaranteed for interchangeability? Yes, the specified 13.88 mm diameter with ±0.002 mm tolerance ensures interchangeability and repeatable fit in modular fixtures and plug‑gauge assemblies. Can the pin be used for alignment and end‑measure checks? The single precision measuring pin (SKU M323.D88) is intended for alignment, end‑measure checks and go/no‑go verification in production and test setups. How is the pin delivered and identified? The product is supplied as a single piece and is identified by SKU M323.D88 and GTIN 4061905066764 to support inventory and traceability. Is this pin suitable for continuous workshop use? The workshop version is finished for durability and frequent handling; the special steel construction supports prolonged service under normal inspection conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.89mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Combining workshop‑grade robustness with 13.89 mm nominal diameter and a repeatable ±0.002 mm tolerance, this gauge pin ensures reliable end‑dimension checks and alignment in routine inspection tasks; its 50 mm length provides sufficient reach for medium‑depth bores while remaining easy to handle. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.D89 gauge pin — 13.89 mm diameter, 50 mm length (Metav IndustryLine) A M323.D89 gauge pin engineered for precise end‑dimension verification and locating in workshop and production environments. 13.89 mm diameter for precise fit 50 mm overall length for medium‑depth checks ±0.002 mm tolerance for high repeatability Reliable checks for everyday inspection tasks The pin is designed as a workshop‑grade measuring element that balances stiffness and handling for frequent use. With a nominal diameter of 13.89 mm and an overall length of 50 mm, the component fits common bores and locating holes used in jigging and inspection fixtures. The specified ±0.002 mm tolerance supports consistent go/no‑go evaluations and reduces rework by providing clear, measurable pass criteria. This makes the pin suitable for batch control in maintenance work and small series production where reproducibility is essential. Material choice and handling benefit accuracy Manufactured from special steel, the pin resists everyday wear while maintaining dimensional stability under normal workshop conditions. The material selection contributes to a smooth surface finish and predictable contact behaviour, which in turn preserves the measured tolerance over repeated cycles. The compact length keeps the pin rigid during insertion, lowering the risk of bending‑induced error and simplifying manual probing tasks. Together, these attributes reduce measurement noise and help technicians obtain usable data quickly. Practical integration into inspection workflows As a single‑piece gauge pin, the item integrates easily into existing master‑pin sets, plug gauges, or alignment routines. Its standard nominal size and clear marking enable rapid identification on the shop bench, while the robust finish minimises the need for frequent replacement. For shops that prioritise uptime, the combination of repeatable accuracy and straightforward handling shortens inspection time per component and supports a more efficient quality assurance cycle. For sample requests, technical clarification or batch supply options for the Metav IndustryLine M323.D89 gauge pin, contact Metav Werkzeuge in Emmerich by phone or email for prompt advice and delivery coordination Technical data Article number: M323.D89 GTIN: 4061905067556 Manufacturer: Metav IndustryLine Facts Diameter: 13.89 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Single gauge pin Suitable for end‑dimension and alignment checks FAQ What tolerances can be expected from the M323.D89 gauge pin? The M323.D89 gauge pin is specified with a ±0.002 mm tolerance, providing high repeatability for routine workshop inspections. Is the pin suitable for locating and alignment in fixtures? Yes, the 13.89 mm diameter and 50 mm length make the pin well suited for locating, alignment and end‑dimension verification in fixtures and jigs. Which material is used for this gauge pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability to ensure consistent measurement performance over time. Can the gauge pin be used as a replacement in existing master pin sets? The single‑piece design and standard nominal diameter allow straightforward substitution in master sets and alignment routines where a 13.89 mm pin is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.8mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
The combination of high shop-floor robustness, tight tolerance of ±0.002 mm and the compact 13.8 mm diameter enables consistent end‑measurement and inspection routines in production. Order the test pin directly via Metav Werkzeuge or contact our consultants for application advice. Test pin, single — 13.8 mm Ø, 50 mm length (Metav IndustryLine) The Test pin, single, 13.8 mm, 50 mm is a workshop-grade inspection pin for precise end‑measurement, alignment checks and go/no‑go testing in manufacturing and quality control. Workshop-grade construction Diameter 13.8 mm, length 50 mm Tolerance ±0.002 mm Made from special steel Compact, repeatable inspection tool Precision that reduces rework and inspection time The compact probe is engineered to deliver consistent results on the shop floor: with a stated accuracy of ±0.002 mm, the pin minimises measurement scatter and helps to reduce reject rates. The tight tolerance is especially relevant for final gauging and pass/fail checks where even small deviations can drive costly rework. The simple cylindrical geometry supports quick seating in fixtures and repeatable contact points, enabling rapid cycle times during routine inspection. Built for everyday workshop use Designed as a workshop-grade item, the pin combines durability with easy handling. The special steel construction provides wear resistance under frequent contact, while the 50 mm length offers enough engagement for most end‑measurement tasks without unnecessary overhang. The modest mass ensures comfortable manual handling and stable placement in portable gauges or test fixtures. This balance of robustness and manageability makes it suitable for assembly lines, toolrooms and maintenance benches. Practical integration and handling benefits The straight cylindrical form makes the pin straightforward to integrate into existing fixtures and gauge assemblies. It functions well as a reference contact or locating element and is suitable for repetitive go/no‑go routines. Clear dimensional specification — 13.8 mm diameter and 50 mm overall length — aids in selecting the correct mating components and fixture bores. Labelling and the included SKU allow traceable inventory control when used in structured quality environments. Contact Metav Werkzeuge for specification support and to request the Metav IndustryLine workshop test pin (SKU M323.D80) for immediate inclusion in inspection workflows — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.D80 GTIN: 4061905066689 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 13,8 mm Länge 50 mm Facts Diameter: 13.8 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop execution Material: Special steel Category: Messstifte eClass: 21170231 FAQ What are the exact dimensions of the pin? The test pin has a diameter of 13.8 mm and an overall length of 50 mm (SKU M323.D80). What tolerance does the pin meet? The inspection pin is specified with an accuracy of ±0.002 mm, suitable for tight end‑measurement tasks. What material is used for the pin? The pin is manufactured from special steel, chosen for wear resistance and durability in workshop conditions. Which applications suit this pin best? Typical uses include end‑measurement, locating and go/no‑go checks in production, fixture locating and alignment routines with repeatable contact points. Is the pin compatible with standard gauge fixtures? Yes, the straight cylindrical form and clear dimensional specification facilitate integration into common gauge blocks and bespoke fixtures; refer to SKU M323.D80 when matching components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.91mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact workshop probe that combines a precise Ø 13.91 mm diameter with a robust 50 mm length and an exacting tolerance of ±0.002 mm for repeatable bore checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.D91 — single test pin, Ø 13.91 mm, 50 mm length (Metav IndustryLine) A single gauge pin (M323.D91) designed for precise end‑measure checks and routine workshop inspection of bore sizes and fixture alignment. Workshop execution for daily use Diameter exactness Ø 13.91 mm High repeatability with ±0.002 mm tolerance Robust special steel construction Reliable tolerance for repeatable inspection results The core advantage lies in the ±0.002 mm dimensional variation, which provides measurable confidence during acceptance and in‑process checks. This level of tolerance supports consistent verification of hole diameters and gauge fittings, reducing ambiguity in pass/fail decisions. By using a dedicated gauge pin rather than improvised probes, measurement uncertainty is lowered and inspection throughput becomes more predictable, which benefits production monitoring and quality control processes alike. Engineered for workshop handling and longevity Built as a workshop execution item, the pin combines a special steel construction with a compact 50 mm shank to withstand repetitive handling and light impacts common on the shop floor. The profile and mass (approx. 0.1 kg) make the test pin easy to locate and insert while maintaining sufficient stiffness for accurate seating. The material choice balances wear resistance and machinability, ensuring that the pin preserves its critical diameter over extended use and minimises the need for premature replacement. Simple fit into existing inspection routines The single‑piece design is suitable for end‑measure and gauge reference tasks, offering straightforward application in go/no‑go checks, fixture set‑up and calibration templates. Identification via SKU M323.D91 and the GTIN supports traceable inventory and quick procurement. Using a dedicated inspection pin streamlines measurement sequences and shortens set‑up times, delivering a practical efficiency gain during routine quality checks without introducing complex workflows. For precise bore verification, choose the Metav IndustryLine gauge pin M323.D91 from Metav Werkzeuge — contact our Emmerich team for tailored technical guidance and procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.D91 GTIN: 4061905067570 Material: Special steel Weight: 0.1 kg Length: 50 mm Diameter: 13.91 mm Tolerance / Accuracy: ±0.002 mm Feature: Workshop execution Facts Single item delivery Compact workshop probe High repeatability Industry use: bore verification and fixture setting Special features Robust special‑steel construction Designed for routine shopfloor use Identifier: M323.D91 FAQ What applications suit this gauge pin? The gauge pin M323.D91 is intended for end‑measure checks, fixture set‑up and verification of bore diameters in workshop and production environments. What is the declared accuracy of the pin? The M323.D91 gauge pin is specified with a dimensional variation of ±0.002 mm, enabling precise go/no‑go and setting operations. Which material is used for the test pin? This test pin is manufactured from special steel, chosen for its wear resistance and suitability for repetitive workshop handling. Is the product supplied as a single item or in sets? The product is supplied as a single gauge pin under SKU M323.D91 for straightforward integration into inspection toolkits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.92mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
For precise workshop gauging, the combination of a 13.92 mm nominal diameter, ±0.002 mm manufacturing tolerance and robust special steel construction delivers consistently reproducible checks — order the part directly via Metav Werkzeuge or consult our specialists if further clarification is required. Gauge pin, single — 13.92 mm Ø, 50 mm length (Metav IndustryLine) Gauge pin, single — 13.92 mm Ø, 50 mm is a compact workshop pin for dimensional verification, assembly checks and reference measurements in precision fixtures. Workshop-grade construction Diameter 13.92 mm precision Tolerance ±0.002 mm accuracy Length 50 mm, single supply Accurate verification for tight tolerances The gauge pin is manufactured to a ±0.002 mm tolerance, making it a reliable reference for high-precision pass/fail checks and fit control. With a nominal diameter of 13.92 mm, the pin provides a defined datum for bores, jigs and alignment operations where repeatability is essential. The tight tolerance reduces uncertainty in go/no-go testing and shortens inspection cycles, supporting smoother production flow and fewer rework loops. As a precision reference, it complements both manual inspection routines and automated fixture validation. Durable, workshop-ready design Engineered as a workshop-grade item, the pin is made from special steel that resists wear under repeated insertion and withdrawal. The 50 mm length balances handling convenience with sufficient engagement in typical small-bore verifications, while the single-piece supply suits selective replacement or toolroom kits. The robust finish facilitates long service life and predictable contact behaviour, which helps maintain measurement consistency across batches and over time. This construction favours practical maintenance regimes and reliable everyday use in busy production environments. Simple integration into inspection routines Compact and straightforward to use, the pin fits common gauge blocks, fixture pockets and transfer gauges, speeding setup for comparative or reference measurements. Traceable identification via SKU and GTIN supports inventory control and part replacement. Stored alongside other precision tools, it provides an immediate go-to reference for bench checks, incoming inspection and final assembly verification. The M323.D92 designation allows quick retrieval from stock lists and helps align supplier communications with internal quality records. For dependable workshop verification choose the Metav IndustryLine gauge pin M323.D92; contact Metav Werkzeuge in Emmerich for suitability checks, availability and delivery details at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: M323.D92 GTIN: 4061905067587 Category: Gauge pins Core data Diameter: 13.92 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Supplied individually FAQ What is the primary use of this gauge pin? The Metav IndustryLine gauge pin M323.D92 (gauge pin, 13.92 mm diameter, length 50 mm) is intended for dimensional verification, go/no-go checks and alignment tasks in fixture and assembly work. How tight is the manufacturing tolerance? Manufactured to a ±0.002 mm tolerance, the M323.D92 offers the precision required for high-repeatability checks and critical fit inspections. What material is the pin made from? The gauge pin is made from special steel, selected for wear resistance and stable contact properties under repeated use. Is the pin supplied individually or in sets? This item is supplied individually, suitable for selective replenishment of inspection kits and bespoke fixture requirements. Can the pin be used in automated fixtures? Yes, the compact geometry and precise diameter make the pin compatible with many fixture pockets and transfer gauges used in automated and semi-automated inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.93mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop‑ready test pin with a precise 13.93 mm diameter and an exacting ±0.002 mm tolerance to secure repeatable end‑measure checks; the 50 mm length and robust construction ensure stable reference points in fixtures and gauging operations. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin, single — 13.93 mm Ø, 50 mm length (Metav IndustryLine) Test pin, single, 13.93 mm, 50 mm length — a compact reference pin for metrology and workshop gauging, suitable for end‑measure checks and fixture alignment Workshop version, robust design Diameter 13.93 mm for precision fits Tolerance ±0.002 mm for high accuracy Supplied in transport box for protection Precision where alignment and repeatability count This gauge pin delivers a defined contact diameter of 13.93 mm with a very small tolerance of ±0.002 mm, making it suitable where dimensional certainty is required. As a hardened reference element, the pin functions as a reliable datum for plug‑type checks and end‑measure verifications, reducing measurement scatter and supporting consistent pass/fail decisions on the production line. The tight tolerance class corresponds to high‑precision workshop and inspection tasks, providing a measurable basis for quality control procedures. Built for everyday workshop handling and fixture use Manufactured from special steel, the pin is configured in a workshop execution that balances toughness and surface quality for repeated seating in jigs and gauges. With a shaft length of 50 mm, the component offers sufficient engagement depth for stable positioning without excess overhang, which aids handling and reduces the risk of deflection. Delivery in a dedicated transport box preserves the surface finish and geometry during storage and transit, ensuring the pin reaches the workplace ready for immediate use. Practical integration and measurement benefits As a compact reference element, the pin integrates easily into existing gauge assemblies, test fixtures and alignment tools to provide a fixed datum for comparative measurements. The dimensionally stable design enables faster set‑ups and reduces rework by offering a reproducible contact surface for go/no‑go checks or comparative inspection stages. Where throughput and reliable decision criteria are priorities, this precision pin supports streamlined control processes and traceable measurement routines. For Metav IndustryLine workshop gauge pins and further guidance on integrating precision reference elements into gauges and fixtures, contact Metav Werkzeuge for specialist advice and prompt supply from Emmerich Technical data SKU: M323.D93 GTIN: 4061905067594 Description: Test pin, single, 13.93 mm, length 50 mm Material: Special steel Weight: 0.1 kg Accuracy: ±0.002 mm Facts Diameter: 13.93 mm Length: 50 mm Tolerance: ±0.002 mm Mass: 0.1 kg Special features Workshop execution Delivered in transport box for protection during transport Application: end‑measure checks, gauging, fixture alignment Supplied as single item FAQ What tolerance does the test pin offer? The test pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for inspection and gauging tasks with the Metav IndustryLine workshop design. Which material is the pin made from? This Metav IndustryLine test pin is produced from special steel, chosen for dimensional stability and wear resistance in repeated fixture contact. Is the pin delivered ready for use and protected? Yes, the pin is supplied as a single item and is delivered in a transport box to protect the finished surface and ensure ready‑to‑use condition on arrival. For which applications is the 13.93 mm pin suitable? The 13.93 mm diameter pin is intended for end‑measure checks, go/no‑go gauging and as a reference element in fixtures where a defined contact diameter is required. How does the pin help with setup and alignment in production? By providing a stable, precisely sized datum, the pin simplifies fixture alignment and reduces set‑up time, enabling reproducible positioning and faster quality decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.94mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Reliable end‑size verification is provided by this workshop‑grade gauge pin: Ø 13.94 mm nominal diameter, 50 mm overall length and a manufacturing tolerance of ±0.002 mm for repeatable checks. Robust special steel construction supports frequent use in setup and inspection tasks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Gauge Pin (Ø 13.94 mm, 50 mm length) The Metav IndustryLine Gauge Pin (Ø 13.94 mm, 50 mm length) is a single workshop‑grade measuring pin designed for precise end‑size checks and straightforward setup tasks Workshop-grade design for toolroom use Diameter 13.94 mm with ±0.002 mm tolerance 50 mm overall length suitable for end‑size checks Manufactured from special steel for durability Precision where it matters The Metav IndustryLine gauge pin delivers a defined measurement datum with a specified tolerance of ±0.002 mm, making it suitable for high‑accuracy workshop checks and final inspection steps. The nominal Ø 13.94 mm dimension and ground working surface ensure contact conditions that reduce measurement scatter; in practise this means more consistent pass/fail decisions during production control. Use in end‑size verification and jig setting benefits directly from the narrow tolerance band because fewer rechecks are required, improving throughput without sacrificing reliability. Built for repeated workshop use Specified as a workshop‑grade item, the pin is made from special steel formulated for wear resistance and dimensional stability under normal handling. The 50 mm overall length provides a practical working length for probing bores and aligning fixtures while remaining compact for bench work. Classified in the micro range of measuring pins, this size combines low deflection with easy one‑hand handling, making it well suited to small parts assembly, toolroom tasks and precision maintenance operations. Practical integration into inspection routines As a single measuring pin for end‑size controls, the unit fits into existing gauge blocks, alignment fixtures and bench jigs without special adapters. The defined geometry and tight tolerance deliver repeatable results, which simplifies statistical process control (SPC) sampling and reduces the need for compensating adjustments in downstream operations. For users requiring further adaptation to bespoke fixtures, Metav specialists can advise on suitable complementary items and measurement strategies to maintain consistent quality flow. For assured end‑size verification and workshop reliability, contact Metav Werkzeuge to request the Metav IndustryLine gauge pin and expert guidance; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.D94 GTIN: 4061905067600 ECLASS: 21170231 Category: Messstifte Facts Nominal diameter: 13.94 mm Overall length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Single test pin delivery Intended for end‑size checks FAQ What is the stated dimensional tolerance for this measuring pin? The product is specified with a dimensional tolerance of ±0.002 mm for the nominal Ø 13.94 mm, enabling fine end‑size verification in workshop inspections. Which material is used for the pin and why does it matter? The pin is manufactured from special steel; this material choice improves wear resistance and dimensional stability for repeated contact measurements in a workshop environment. What length and diameter does the pin have? The gauge pin measures 50 mm in overall length with a nominal diameter of 13.94 mm, matching common micro‑range requirements for small parts and toolroom checks. Is a calibration certificate included with delivery? The product data does not indicate delivery with a calibration certificate; calibration details would be specified separately if included. Which applications suit this gauge pin best? This measuring pin is intended for end‑size checks, fixture and jig set‑up, and precision bench operations where a compact, low‑deflection gauge is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.95mm Gauge Pin 50mm Length Workshop Version, Special Steel ±0.002 - Metav IndustryLine
Take advantage of precise end‑dimension control with a 13.95 mm diameter pin and a ±0.002 mm positional tolerance, combined with a robust special steel construction and transport-ready casing for reliable workshop use. Order the test pin directly via Metav Werkzeuge or consult the specialists if application advice is required. Test pin, single, 13.95 mm, length 50 mm — workshop test pin with ±0.002 mm accuracy (Metav IndustryLine) Test pin, single, 13.95 mm, length 50 mm is a workshop-grade gauge pin intended for accurate end‑dimension checks, fixture alignment and reference probing in production and inspection settings. Workshop-grade construction Diameter 13.95 mm precision fit Tolerance ±0.002 mm accuracy Supplied in transport case Confident dimensional verification for production processes The inspection pin is designed for consistent, repeatable checks where accuracy reduces rework and downtime. With a declared tolerance of ±0.002 mm, the pin supports fine adjustment tasks and final inspections that demand narrow deviation limits. Using a defined gauge pin simplifies pass/fail assessments and speeds up quality decisions, so measurement steps become a dependable part of the production sequence rather than a bottleneck. Durable build for everyday workshop demands Constructed from special steel in a workshop execution, the pin withstands routine handling and repeated seating in fixtures. The material choice provides wear resistance and a stable surface finish that preserves the 13.95 mm datum over many cycles, extending the service life and lowering replacement frequency. This robustness translates to fewer interruptions in maintenance windows and a steadier overall throughput on the shop floor. Faster setup and secure fixturing with exact fit A precisely ground diameter ensures a snug fit in locating holes and gauges, which improves assembly alignment and reduces play during machining or measurement. The standardised length of 50 mm offers sufficient engagement for most fixture designs without excess overhang, enabling quicker setup and reliable datum transfer. By integrating a dedicated gauge pin, alignment procedures become shorter and less error‑prone, increasing operational efficiency. Transport-ready delivery and traceable identification Delivered in a protective transport case, the pin arrives ready for safe handling and storage; the casing minimises surface contact and transit damage. The compact format and clear SKU/GNT identifiers facilitate inventory control and drawer storage in toolrooms. Lightweight and straightforward to inspect, the component supports a pragmatic approach to workshop logistics, from bench use to bench storage. For workshop-ready precision choose the Metav IndustryLine test pin and contact Metav Werkzeuge in Emmerich for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.D95 GTIN: 4061905067617 Weight: 0.1 kg Material: Special steel Length: 50 mm Diameter: 13.95 mm Positional tolerance: ±0.002 mm Facts Single item gauge pin Workshop execution Transport case included Special features Designed for end‑dimension checks Robust surface for repeated seating Compact geometry for fixture integration FAQ What measurement accuracy can be expected from this gauge pin? The test pin offers a positional tolerance of ±0.002 mm, making it suitable for fine workshop inspections and precision alignment tasks. Is the pin supplied ready for use or does it require additional preparation? The Metav IndustryLine test pin is supplied in a protective transport case and is ready for immediate use in fixturing and inspection routines. Which material is the pin made from and what does that mean for longevity? Manufactured from special steel, the pin provides good wear resistance under normal workshop handling, ensuring stable datum surfaces over repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.96mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial accuracy, compact handling and robust workshop design to keep inspection throughput steady. The high tolerance of ±0.002 mm on a 13.96 mm diameter and the 50 mm overall length ensure repeatable end‑measurement results; order directly via Metav Werkzeuge or consult the technical team for specification matching. Gauge pin (single) 13.96 mm diameter · 50 mm length — Metav IndustryLine A Gauge pin (single, 13.96 mm diameter, 50 mm length) tailored for precise end‑measurement and fit‑checking in inspection and assembly applications. Workshop version, robust finish Diameter 13.96 mm precision fit Length 50 mm for deep seats Tolerance ±0.002 mm for tight control Precision that reduces rework and speeds inspection The gauge pin provides a clearly defined reference for end measurements and go/no‑go checks, delivering a repeatable datum with a stated tolerance of ±0.002 mm. Such tight control is particularly useful where component fit and clearance are critical: the fixed 13.96 mm diameter gives a deterministic contact surface, avoiding ambiguity in pass/fail decisions. Presented as a compact verification tool, it supports higher throughput by shortening inspection cycles and reducing the likelihood of downstream rework. Robust construction for everyday workshop demands Manufactured in special steel, the pin combines wear resistance with dimensional stability over repeated cycles. The 50 mm overall length affords access to deeper seats while remaining easy to handle; at approximately 0.1 kg the weight supports stable placement without being cumbersome. The workshop version finish balances durability and cost‑efficiency, making the component suitable for production benches, fixture checks and assembly lines where tools are used frequently and need to withstand practical handling. Simple integration into measurement routines and tooling As a standardised inspection artefact, the pin slots into established procedures for end‑dimension verification, reference checks and fixture validation. The uncomplicated geometry enables straightforward comparison to nominal dimensions and easy replacement in jigs or mandrels. Using a defined gauge such as this reduces interpretation error in quality control documentation and improves statistical process control inputs, supporting leaner production and more reliable acceptance criteria. Contact Metav Werkzeuge for technical advice and to secure the M323.D96 gauge pin for precision inspection tasks Technical Data Article number: M323.D96 GTIN: 4061905067624 Manufacturer: Metav IndustryLine Facts Diameter: 13.96 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins Intended use: End measurement / fit checking FAQ What measurement tasks is this gauge pin suitable for? The gauge pin is intended for end‑measurement and fit checks; it offers a defined 13.96 mm reference for bore and seating verification. How precise is the M323.D96 gauge pin? The M323.D96 from Metav IndustryLine carries a stated tolerance of ±0.002 mm, suitable for tight inspection limits. Is the gauge pin robust enough for daily workshop use? Yes, the workshop execution and special steel construction make the pin resilient to frequent handling and routine inspection use. Can this pin be used with inspection fixtures and jigs? The pin’s simple cylindrical geometry and 50 mm length allow straightforward integration into existing fixtures and mandrels. How is the gauge identified for inventory and traceability? Identification is possible via the article number M323.D96 and GTIN 4061905067624 for inventory and ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.97mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of a compact, workshop-ready gage that combines a Ø 13.97 mm nominal diameter with a repeatable ±0.002 mm tolerance and a 50 mm length for fast end‑dimension checks; its special steel construction ensures durability in daily use. Order the inspection pin directly via Metav Werkzeuge or ask our consultants if needed. Inspection pin M323.D97 – Ø 13.97 mm, 50 mm length (Metav IndustryLine) The Inspection pin M323.D97 is a precision gage pin designed for end‑dimension verification and quick in‑process checks in workshop environments. *Workshop version, robust design *Diameter 13.97 mm, high-precision fit *Tolerance ±0.002 mm for reliable checks Consistent end‑dimension checks for assembly and inspection This gage pin delivers a compact solution for routine dimensional control where tight fits and repeatable results matter. The combination of Ø 13.97 mm and a 50 mm overall length gives a stable bearing surface that reduces wobble during insertion, while the declared ±0.002 mm variation supports trustworthy go/no‑go assessments in production. The use of special steel balances surface hardness with resistance to wear, preserving the pin’s geometry through repeated handling and contributing to lower rejection rates on assembly lines. Built for workshop handling and everyday robustness The workshop version construction provides resilience against knocks and frequent manipulation typical in trade and maintenance contexts. At approximately 0.1 kg, the pin is heavy enough to feel substantial in hand yet compact for rapid gauging tasks; that mass aids stable seating in bores and sockets without being cumbersome. The refined shaft finish and precision fit make it suitable for use in jigs, fixture checks and as a reference in quick go/no‑go procedures where simplicity and repeatability save time on the shop floor. Integrates smoothly into quality routines and tooling sets Designed to complement existing gage sets and bench tooling, this inspection pin supports efficient process control and reduces setup iteration. The straightforward geometry eases use in line inspections, bore verification and end‑dimension confirmation of machined parts. By standardising on a reliable, workshop‑orientated pin, teams can improve throughput and consistency without complex calibration steps; the short, rigid profile is especially beneficial for final dimensional checks and fastening alignment tasks. Contact Metav Werkzeuge for tailored advice on incorporating this inspection pin into workshop inspection processes; Metav Werkzeuge in Emmerich can supply the M323.D97 and advise on compatible tooling and delivery options – info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.D97 GTIN: 4061905067631 Description: Inspection pin, single, Ø 13.97 mm, length 50 mm Facts Diameter: 13.97 mm Length: 50 mm Weight: 0.1 kg Tolerance / variation: ±0.002 mm Special features Material: special steel Workshop version Intended for end‑dimension checks and bore verification FAQ What applications suit this inspection pin best? The inspection pin M323.D97 is intended for end‑dimension checks, bore verification and simple go/no‑go assessments in workshop and production environments. How precise is the pin for repeatable measurements? Manufactured for a variation of ±0.002 mm, the pin delivers repeatable seating and reliable pass/fail decisions for typical assembly and inspection tasks. Which material is used and how does it affect durability? Made from special steel, the pin offers a durable surface and wear resistance suitable for frequent workshop use without rapid deterioration of the reference diameter. Can this pin be used in jigs and fixture alignment? Yes; the compact 50 mm length and rigid profile are designed to assist with alignment, seating checks and fixture verification during setup and production runs. Is the pin suitable for precision laboratory metrology? While optimised as a workshop gage, the pin’s tight tolerance makes it useful for routine quality control; for lab‑grade traceability and submicron requirements, a dedicated laboratory standard should be considered Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.98mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from repeatable end‑dimension checks with a 13.98 mm diameter and a tight ±0.002 mm tolerance; the workshop‑grade gauge pin combines robust special steel construction and a compact 50 mm length for reliable fixture verification. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisors if further clarification is required. Gauge pin, single — 13.98 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single designed for precise end‑dimension inspection and fixture verification in workshop metrology. Diameter 13.98 mm precision fit 50 mm length workshop execution Tolerance ±0.002 mm high repeatability Special steel construction for durability Ensure repeatable end‑dimension checks with tight tolerances The compact measuring probe delivers consistent results where small deviations matter. With a nominal diameter of 13.98 mm and a verified tolerance of ±0.002 mm, this compact test pin is suited to end‑dimension control and plug‑gauge applications that demand traceable repeatability. The fine tolerance reduces rework and accelerates inspection cycles, enabling quicker in‑process decisions and fewer downstream faults. Built for daily workshop use — robust and easy to handle Crafted in special steel, the pin resists wear and preserves measuring integrity across repetitive operations. The 50 mm length offers a practical balance between reach and rigidity for bench checks and fixture validation; the compact form factor simplifies handling during series inspection and minimises the risk of flex‑related error. This workshop execution is optimised for frequent use, helping to maintain productivity in busy production environments. Identification, traceability and system compatibility Marked and traceable as M323.D98 and supplied with GTIN 4061905068577, the pin integrates easily into parts lists and calibration schedules. The simple geometry makes it compatible with standard plug‑gauge holders and fixture bores, supporting rapid substitution and inventory control. Paired with Metav’s service and catalogue range, this component supports a streamlined procurement process and reliable replenishment for scheduled inspections. Contact Metav Werkzeuge to request the M323.D98 gauge pin for dependable fixture checks or to obtain tailored technical advice from our metrology specialists Technical data Article number: M323.D98 GTIN: 4061905068577 Eclass: 21170231 Facts Diameter: 13.98 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop execution Label: Prüfstift, einzeln, 13,98 mm Länge 50 mm Story trigger: endmasse FAQ What applications is this gauge pin intended for? This gauge pin is intended for end‑dimension checks, fixture verification and plug‑gauge tasks in workshop metrology; the compact design suits routine inspection of bores and gauges. Does the pin meet high repeatability requirements? Yes — the test pin features a tolerance of ±0.002 mm, providing high repeatability for comparative and acceptance measurements. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability under frequent use, which helps maintain measurement integrity. How is the item identified for ordering and inventory? The component is listed as M323.D98 with GTIN 4061905068577, enabling straightforward ordering and traceability within procurement systems. Is the 50 mm length suitable for fixture and bore checking? The 50 mm length offers a practical compromise between reach and rigidity, making it suitable for most workshop fixture and small‑bore checks where a compact, stable probe is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.99mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the high repeatability of ±0.002 mm tolerance, the precise 13.99 mm diameter and robust special steel construction for reliable in‑process checks. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.D99 — single precision test pin, 13.99 mm diameter (Metav IndustryLine) The gauge pin M323.D99 is a single precision test pin designed for quick verification of bore fits and go/no‑go checks in workshop inspection tasks. Workshop-configured for daily industrial use Diameter 13.99 mm for precision fit Tolerance ±0.002 mm for consistent results Precision where it matters The gauge pin delivers a nominal diameter of 13.99 mm with a verified tolerance of ±0.002 mm, making it suitable for repeatable go/no‑go checks and tight‑tolerance verifications. Constructed from special steel, the pin maintains dimensional stability under typical workshop handling and enables consistent contact with mating bores. The narrow tolerance and hardened material minimise elastic deformation during insertion, which supports trustworthy pass/fail assessments and reduces rework. Built for workshop inspection and fixtures Engineered as a workshop version, this single test pin combines sturdy handling characteristics with a compact 50 mm length that is easy to manoeuvre in jigs and fixture setups. The straightforward geometry simplifies visual alignment and tactile feel during manual inspection cycles. The robust finish of the special steel surface resists everyday wear, preserving the measuring diameter and ensuring consistent measurement outcomes in serial quality checks. Practical use and traceable identification For traceability and ordering, the test pin is listed under SKU M323.D99 and GTIN 4061905068584; the compact form factor makes it a practical spare for inspection kits and toolrooms. Typical applications include assembly line spot checks, fixture verification and quick dimensional validation of bores and holes. Rely on its repeatability to reduce inspection time and support efficient process control while benefiting from Metav IndustryLine’s industrial supply chain and product consistency. Select the Metav IndustryLine workshop‑grade gauge pin for reliable bore verification and contact Metav Werkzeuge for tailored advice and fast supply from Emmerich Technical data Article number: M323.D99 GTIN: 4061905068584 Weight kg: 0.1 Material: Special steel SKU: M323.D99 Core dimensions Diameter mm: 13.99 Length mm: 50 Tolerance: ±0.002 mm Special features Workshop version Single gauge pin Category: Messstifte Precision nominal diameter FAQ What are the exact dimensions of the gauge pin? The gauge pin M323.D99 has a nominal diameter of 13.99 mm and a length of 50 mm, specified for compact inspection tasks. Which tolerance can be expected from this test pin? The test pin is manufactured to a tolerance of ±0.002 mm, offering high repeatability for go/no‑go and fit checks. What material is used for the pin? The pin is made from special steel, providing dimensional stability and resistance to everyday workshop wear for consistent measurements. For which applications is this gauge pin suitable? The gauge pin from Metav IndustryLine is intended for bore verification, fixture checks and quick quality control operations in a production or workshop environment. How is the product identified for ordering or stock? The product is listed as SKU M323.D99 and GTIN 4061905068584, which can be used for procurement and stock tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.9mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability, tight tolerance and robust workshop construction to keep inspection cycles reliable and efficient; order the single gauge pin Ø13.9 mm, length 50 mm directly via Metav Werkzeuge or consult our technical team for application advice. Gauge pin Ø13.9 mm — single workshop plug gauge, Metav IndustryLine The gauge pin Ø13.9 mm, length 50 mm is a single, workshop-grade plug gauge designed for quick end‑measurement and fit verification in production and inspection environments. Workshop-grade construction Diameter 13.9 mm, length 50 mm Tolerance ±0.002 mm Made from special steel Repeatable accuracy to protect production tolerances This workshop plug provides a tolerance of ±0.002 mm, delivering repeatable checks that reduce uncertainty in go/no‑go decisions and help avoid costly rework. The tight tolerance translates into a reliable reference for checking bores and fits during assembly and final inspection, improving process stability and increasing throughput. The accuracy is presented in a form easily integrated into standard quality control procedures, so inspection time per part is minimised while traceability is maintained. Robust design for everyday handling and longevity Manufactured in special steel and finished for workshop use, the plug is engineered to tolerate frequent handling and routine contact with machined surfaces. The compact length of 50 mm and low weight (0.1 kg) make it simple to position in jigs, fixtures or handheld checks without fatigue. The solid construction reduces the risk of deformation and preserves the gauge’s geometric integrity, ensuring consistent measurement performance over many inspection cycles. Easy identification and practical integration into workflows Supplied as a single item with clear identifiers, the plug can be recorded in inspection logs and stored alongside other calibration standards for efficient part selection. The SKU M323.D90 and GTIN enable straightforward stock management and ordering. Because the item is a workshop version, it suits routine go/no‑go checks, in‑process verification and final acceptance testing where a compact, precise reference is required. The result is a small investment that contributes to fewer production interruptions and a steadier quality record. For workshop-calibre verification tasks choose Metav IndustryLine plug gauges such as the M323.D90 — contact Metav Werkzeuge GmbH for ordering and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.D90 GTIN: 4061905067563 Manufacturer: Metav IndustryLine Material: Special steel Diameter: 13.9 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Facts Length: 50 mm Diameter: 13.9 mm Weight: 0.1 kg Tolerance: ±0.002 mm eCl@ss: 21170231 Special features Workshop version Single-piece supply SKU: M323.D90 GTIN included High repeatability for routine inspection FAQ What applications suit this gauge pin best? The gauge pin Ø13.9 mm, length 50 mm from Metav IndustryLine is intended for bore and fit verification in workshop and production environments, making it suitable for go/no‑go checks, assembly control and routine inspection tasks. What is the declared tolerance and how does it affect use? The plug offers a declared tolerance of ±0.002 mm; this level of precision supports reliable acceptance checks and reduces the risk of false rejects in standard quality workflows. Is the item easy to order and identify in stock systems? Yes. The product is listed under SKU M323.D90 and GTIN 4061905067563, which facilitates inventory management and reordering for workshop tool cabinets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
130mm Setting Ring Form C Hardened Gauge Steel DIN 2250/DIN 286 JS3 - Metav IndustryLine
Take advantage of the combination of DIN‑compliant tolerance (DIN 2250 / DIN 286, JS 3), hardened and lapped gauge steel, and a robust Form C profile for reliable seating and repeatable checks — order the setting ring directly via Metav Werkzeuge or consult our specialists for application advice. M313.130 setting ring — 130 mm, Form C, hardened and lapped gauge steel (Metav IndustryLine) The M313.130 is a 130 mm setting ring manufactured to DIN standards for use as a traceable reference gauge in inspection and workshop environments. Certified to DIN 2250 and DIN 286, JS3 Hardened, lapped gauge steel construction Form C profile for stable seating and use Precise, standardised reference for faster inspection decisions The ring is manufactured to DIN 2250 and DIN 286 with a tolerance class of JS 3, delivering a clearly defined reference size for calibrating instruments and routine go/no‑go checks. The combination of standard conformity and a lapped contact surface ensures low measurement uncertainty and fast decision making on the shop floor: operators can rely on the dimension as a fixed benchmark, reducing secondary checks and minimising rework. As a hardened, stable component in the measuring chain, the ring supports repeatable setups and consistent inspection throughput. Robust design that aids handling and repeatability Built from hardened and lapped gauge steel and supplied in a Form C profile, the ring balances mass and seating geometry to provide secure positioning during checks. The 3.7 kg mass contributes to a vibration‑resistant contact, while the Form C contour simplifies engagement with shafts or mandrels and reduces lateral movement during measurement. This design reduces operator influence on results and shortens setup time when setting comparators or verifying tool diameters — an efficiency gain for production and toolrooms alike. Longevity, traceability and workshop integration The lapped finish resists surface wear and preserves nominal dimension over repeated use, increasing service life and lowering total cost of ownership. Traceability to recognised standards simplifies internal quality records and audit trails; the ring is readily integrated into calibration routines and inspection plans. For workshops seeking dependable reference gauges, this setting ring combines durable construction with industry‑recognised tolerancing so that inspection processes remain consistent and auditable across production runs. Contact Metav Werkzeuge for application guidance and to request the M313.130 setting ring or a detailed inspection certificate from our Emmerich team Technical data Article number: M313.130 GTIN: 4054469121109 Diameter: 130 mm Weight: 3.7 kg Material: hardened and lapped gauge steel Form: C Standards: DIN 2250; DIN 286, JS 3 Facts eClass: 21170104 Tariff number: 90173000 Category: Lehren / Messstifte SKU: M313.130 Special features Hardened and lapped contact surfaces Form C profile for stable seating Designed for workshop inspection and gauge setting Robust mass for reduced vibration during checks FAQ What tolerance class does the setting ring meet? The M313.130 setting ring conforms to DIN 2250 and DIN 286 with a tolerance class of JS 3, providing a defined reference for inspection tasks. Which material is used and how does it affect wear? Manufactured from hardened and lapped gauge steel, the ring offers a wear‑resistant contact surface that maintains dimensional stability under frequent use. Is the ring suitable for shop‑floor use or only for laboratory settings? The robust construction and Form C seating make the ring suitable for both workshop inspection routines and laboratory reference tasks where standardised checks are required. How does Form C benefit handling during measurement? The Form C profile promotes secure seating on shafts and mandrels, reducing lateral play and making positioning quicker and more repeatable for production checks. Can the M313.130 be used to set measuring instruments? Yes — the M313.130 is intended as a reference gauge for setting comparators, calibrating measuring devices and performing go/no‑go checks in inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com