Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
14.42mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from precise end‑size control, a robust workshop design and traceable tolerances of ±0.002 mm — ideal where repeatability matters; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 14.42 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin (single), 14.42 mm Ø and 50 mm length, designed for quick end‑size verification and fit checks in workshop environments Workshop version for robust use Diameter 14.42 mm for precision fits Length 50 mm, stable handling Manufactured from special steel Consistent dimensional control for mating parts A compact inspection pin provides a straightforward, rational means to verify bore diameters and mating fits: the 14.42 mm nominal diameter combined with a declared repeatability of ±0.002 mm ensures that small clearances and interference fits are checked reliably. This level of consistency reduces rework and downstream rejects by transforming a visual or subjective check into an objective measurement step. For production control, the pin serves as a physical reference to validate assembly tolerances and to confirm the final dimension during routine sampling. Built for daily workshop use with durable materials This workshop execution is made from special steel, giving the pin mechanical resilience against knocks and abrasion encountered at the bench. The 50 mm length balances engagement depth with ease of handling, while a compact mass supports quick manual checks without fatigue—the item weight is 0.1 kg, which aids stable placement in bores. Where frequent probing is required, the robust construction maintains surface integrity and dimensional stability, preserving the original diameter and maintaining performance over time. Practical application and workflow integration As a single inspection probe, the component integrates easily into standard gauging routines and nest checks. The plain geometry allows immediate visual use with fixtures, bore gauges or when paired with plug gauge sets for stepwise verification of assemblies. Traceable labelling (GTIN: 4061905066832) and a clearly defined SKU simplify stock management and procurement. For customers uncertain about fit or suitable tolerances, Metav’s advisors can provide guidance on adopting the pin as part of an inspection plan, ensuring the pin complements existing measurement equipment and quality procedures. Contact Metav Werkzeuge today to check compatibility with specific assemblies and to secure supply of this workshop‑grade gauge pin from the Metav IndustryLine range Technical data Article number: M323.E42 GTIN: 4061905066832 SKU: M323.E42 Facts Nominal diameter: 14.42 mm Length: 50 mm Tolerance / repeatability: ±0.002 mm Weight: 0.1 kg Special features Single gauge pin for end‑size checks Workshop execution Material: special steel Suitable for routine fit verification FAQ What is the declared accuracy of the gauge pin? The declared repeatability for the gauge pin is ±0.002 mm, providing tight control for fit and end‑size verification. Which materials is the probe made from? The probe is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop environments. What applications suit this gauge pin best? This single gauge pin is suitable for bore checks, mating‑part verification and quick end‑size inspections in production and maintenance settings. How does the 50 mm length affect use? A 50 mm engagement length offers stable seating in bores while remaining easy to handle for manual checks and fixture use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.43mm Probe Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise end‑measurement capability and robust workshop design: a 14.43 mm diameter gauge pin with ±0.002 mm tolerance and a compact 50 mm length ensures repeatable results for inspection and assembly; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.E43 — single, 14.43 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin M323.E43 is a compact inspection pin for end‑measurements and hole gauging in workshop environments, offering high repeatability in alignment and assembly tasks. Workshop version for robust daily use Precision tolerance ±0.002 mm Diameter 14.43 mm, length 50 mm Delivered in protective transport case Accuracy that reduces rework and speeds inspection A tolerance of ±0.002 mm places this test pin in the high‑precision segment of workshop gauges, making it suitable for tight inspection limits and precision assembly checks. The close tolerance translates directly into fewer part rejections and less rework, as deviations are identified reliably at the gauge stage. Constructed from special steel, the pin maintains dimensional stability under normal workshop conditions and resists wear across repeated insertion cycles, which benefits throughput and consistency in quality control workflows. Built for everyday handling and secure transport Designed as a workshop version, the pin combines a compact 50 mm length with a precise 14.43 mm diameter to deliver easy handling in jigs, fixtures and measuring benches. Its low mass contributes to straightforward placement and removal, while the included protective transport case protects the measurement surface during storage and transit. The single‑piece supply supports fast replacement in modular gauges or when a specific nominal size is required for a particular inspection run. Practical applications and trusted supply chain Intended for end measurements, hole gauging and alignment tasks, the pin is suitable for use in inspection fixtures, drill jigs and assembly gauges where a defined diameter reference is required. Supplied as a single gauge pin, it integrates with standard metrology setups and complements a broader set of workshop gauges. Metav’s position as a precision partner and distributor ensures transparent availability and traceable logistics from Emmerich; further technical documentation or batch information can be provided on request to support integration into existing quality systems. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine gauge pin M323.E43 — technical consultants are available from our Emmerich site by e‑mail or phone to confirm suitability for specific metrology tasks Technical data SKU: M323.E43 GTIN: 4061905066849 Weight: 0.1 kg Material: Special steel Accuracy: ±0.002 mm Facts Diameter: 14.43 mm Length: 50 mm Mass: 0.1 kg Special features Workshop version Protective transport case included Single gauge pin for end measurements Designed for inspection and alignment tasks FAQ What tolerance does the gauge pin offer and for which tasks is it suited? The gauge pin delivers a tolerance of ±0.002 mm and is suited to precise end‑measurements, hole gauging and alignment tasks in workshop inspection and assembly processes. Is the pin supplied ready for use and how is it packaged? The gauge pin M323.E43 is supplied as a single unit and arrives in a protective transport case to preserve the measuring surface during storage and transit. Which material is used and how does it affect durability? Made from special steel, the pin offers good wear resistance and dimensional stability for routine workshop use and repeated insertion cycles. Can additional technical documentation or batch information be obtained? Yes; Metav Werkzeuge can provide supplementary technical data and traceability information upon request to support integration into quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.44mm Gauge Pin Workshop Version, 50mm Length - Metav IndustryLine
Benefit from the combination of ±0.002 mm dimensional accuracy and a Special steel construction for dependable reference checks and fixture set-up; the robust 50 mm length ensures repeatable positioning in workshop environments. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 14.44 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single, 14.44 mm (50 mm length) is a workshop-grade reference pin designed for dimensional checks, fixture alignment and routine inspection tasks in metalworking and assembly environments. Workshop-grade construction, hardened special steel Diameter 14.44 mm for precise reference fits Dimensional accuracy ±0.002 mm, traceable checks Consistent precision that speeds inspection cycles The gauge pin delivers repeatable results through a tight tolerance of ±0.002 mm, making it suitable for fine pass/fail checks and short-run quality control. With a nominal diameter of 14.44 mm and a working length of 50 mm, the component offers a compact but stable datum for go/no-go measurements and fixture alignment. The use of Special steel provides dimensional stability under routine shop‑floor conditions while keeping handling straightforward; this combination reduces rework and shortens inspection cycles by providing a reliable physical reference rather than relying solely on adjustable gauges. Robust design for workshop use and fixture setup Engineered as a workshop execution item, the pin is intended for repeated use in locating, setting and verifying parts on jigs and fixtures. The slim, single‑pin format simplifies insertion and removal during set-up operations and helps maintain alignment without adding bulk to assemblies. On the shop floor this equates to fewer interruptions during changeovers and more predictable set‑up times. The compact weight (approximately 0.1 kg) and straightforward form factor make handling and storage efficient in busy production environments. Practical integration and quality assurance on the production line Inventory and traceability are supported by the product identifiers: GTIN 4061905067648 and SKU M323.E44, which simplify ordering and stock control. The pin’s specification suits applications such as repeatability tests, fixture masters and dimensional go/no‑go validation in machining and assembly. Supplied by Metav IndustryLine, the item benefits from the supplier’s quality filtering and European distribution, a reassurance for purchasers seeking consistent metrology tools for everyday industrial use. For reliable workshop reference pins and technical guidance from Metav IndustryLine, contact Metav Werkzeuge to discuss application suitability and delivery from Emmerich Technical data Article number: M323.E44 GTIN: 4061905067648 Weight: 0.1 kg Material: Special steel Length: 50 mm Diameter: 14.44 mm Accuracy: ±0.002 mm Version: Workshop execution Dimensions & core data Length: 50 mm Diameter: 14.44 mm Weight: 0.1 kg Accuracy: ±0.002 mm Features & applications Single gauge pin for reference checks Suitable for fixture set-up and go/no-go controls Designed for workshop environments Identified for inventory with GTIN and SKU FAQ What tolerance does this gauge pin hold? The gauge pin M323.E44 (Metav IndustryLine) is specified to an accuracy of ±0.002 mm, suitable for fine reference checks and routine inspection. Is this pin suitable for fixture set-up and go/no-go checks? Yes — the single gauge pin is designed as a workshop reference for fixture alignment, locating and pass/fail measurements. What are the material and dimensions of the pin? The pin is made from Special steel, with a working length of 50 mm and a diameter of 14.44 mm. How can the item be identified for stock and ordering? Use GTIN 4061905067648 and SKU M323.E44 for inventory, ordering and traceability within procurement systems. Is this product intended for shop‑floor use? The workshop execution of this Metav IndustryLine gauge pin is optimised for shop‑floor handling, offering a balance of robustness and compact form for everyday inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.45mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a workshop-grade gauge pin that combines repeatable measurements, robust construction and fine tolerance control for reliable end‑size verification; order the M323.E45 directly via Metav Werkzeuge or consult the Metav advisers for application support. M323.E45 gauge pin — 14.45 mm × 50 mm (Metav IndustryLine) M323.E45 is a single gauge pin designed for precise end‑size checks and routine inspection tasks in machine shops and quality departments. Workshop version for robust use Diameter 14.45 mm for end-size verification Length 50 mm for checks in deeper bores Accuracy ±0.002 mm for precise repeatability Precise end‑size checks with workshop-grade repeatability The M323.E45 gauge pin is engineered for dimensional confirmation where consistent results matter. With a nominal 14.45 mm diameter and an exact 50 mm length, the pin delivers ±0.002 mm positional repeatability, which supports tight tolerance control in production and inspection loops. Such specification allows straightforward interpretation of deviations during go/no‑go checks and bench verification, reducing rework and helping to maintain process capability. The combination of compact geometry and defined tolerance makes the component suitable for spot checks, fixture verification and final dimensional acceptance in regular shop environments. Robust construction for everyday shop use Constructed from special steel and executed as a workshop version, the gauge pin tolerates frequent handling and the mechanical stresses typical of a production setting. The mass and finish support stable seating in holes and fixtures, promoting reproducible contact conditions and minimising operator‑induced variation. The item is supplied in a protective transport box, ensuring safe delivery and simple storage between uses. These practical design choices translate into lower downtime for inspection routines and longer service life compared with untreated checking pins. Seamless integration into inspection workflows As a single‑piece inspection pin, this component is compatible with common gauging procedures and jigs used in machine shops and inspection benches. Its compact dimensions facilitate measurements in confined spaces and allow easy substitution within existing pin sets or fixtures. Clear labelling via SKU and GTIN supports traceability in inventory systems, while the pin’s consistent geometry assists metrology teams in documenting deviations and trend analyses. For operators and quality engineers, the result is a straightforward tool that simplifies routine checks and supports reproducible measurement records. Contact Metav Werkzeuge today to secure the M323.E45 gauge pin from Metav IndustryLine or to request tailored application advice from our technical consultants in Emmerich Technical Data Article number: M323.E45 GTIN: 4061905067655 Manufacturer: Metav IndustryLine Facts Diameter: 14.45 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Delivered in protective transport box Category: Gauge pins eClass: 21170231 FAQ What tolerance does the gauge pin achieve? The M323.E45 gauge pin (Metav IndustryLine) is specified with an accuracy of ±0.002 mm, suitable for tight workshop and inspection tolerances. How is the pin delivered for handling and storage? Delivery of the M323.E45 includes a protective transport box, which safeguards the pin during transport and simplifies storage. What material is used for the gauge pin? The inspection pin is made from special steel, providing durable contact surfaces and resistance to everyday wear in a workshop setting. Can this pin be used for checks in deeper bores? Yes, the 50 mm length of the M323.E45 suits applications requiring access into moderately deep holes or recesses while maintaining stable seating. Is the M323.E45 suitable for routine shop gaging tasks? Designed as a workshop version, the M323.E45 gauge pin supports routine end‑size verification and fits standard inspection workflows. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.46mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of high repeatability and robust special steel in a compact workshop format to secure reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge Pin M323.E46 — single precision test pin, Ø 14.46 mm, 50 mm length (Metav IndustryLine) The Gauge Pin M323.E46 is a single workshop‑grade test pin designed for precise dimensional checks and fixture set‑up in inspection and production environments. Workshop version for daily use Diameter 14.46 mm for end measurements Accuracy ±0.002 mm Special steel for wear resistance Precision that reduces rework and speeds inspections The compact design delivers repeatable results thanks to a manufacturing tolerance of ±0.002 mm, which supports consistent end‑dimension verification and reduces the need for corrective machining. As a small, single‑element gauge, this pin is ideal where a defined reference is required for short‑range checks; the combination of controlled geometry and low deviation provides a reliable basis for pass/fail decisions and helps maintain production throughput without frequent recalibration. Robust material and everyday handling for workshop environments Constructed from special steel, the pin combines surface wear resistance with dimensional stability under normal workshop conditions. The 50 mm overall length and solid construction make the pin easy to mount in inspection fixtures or to use as a reference in assembly jigs, while the modest weight (0.1 kg) ensures comfortable handling during repetitive operations. The workshop version balances durability and precision, offering a tool that withstands regular use while maintaining the fine tolerances required for repeatable checks. Practical integration in inspection workflows As a single‑element gauge pin, the M323.E46 fits naturally into existing measuring routines and small‑batch workflows where reliable short‑range measurement is essential. Use this pin for end‑measurement tasks, alignment checks and as a reference in manual or semi‑automated inspection set‑ups; the straightforward geometry minimises interpretation errors and makes documentation of measurement routines simpler. For specialised setups or batch testing strategies, the pin can serve as a verifiable reference within a traceable inspection chain. For workshop‑grade precision from Metav IndustryLine, choose the M323.E46 gauge pin and contact Metav Werkzeuge for ordering or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.E46 GTIN: 4061905067662 Manufacturer: Metav IndustryLine Facts Diameter: 14.46 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Single gauge pin FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.E46 is manufactured to a tolerance of ±0.002 mm, providing high repeatability for end‑measurement tasks. Which material is used for the pin? This test pin is made from special steel, chosen for wear resistance and dimensional stability in workshop conditions. Is the item supplied as a single unit or as part of a set? The product is supplied as a single gauge pin (M323.E46) for use as an individual reference or replacement element. What applications suit this gauge pin best? The M323.E46 is suitable for short‑range dimensional checks, alignment and fixture set‑up where a precise, durable reference pin is required. How should the pin be stored to preserve accuracy? Store the gauge pin in a dry environment, avoiding corrosive atmospheres and mechanical impacts; periodic visual inspection is recommended to ensure surface condition and geometry integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.47mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
The combination of workshop‑rated construction, ±0.002 mm accuracy and a compact 50 mm length delivers a dependable reference for end‑dimension checks; order directly via Metav Werkzeuge or consult our experts for application advice. Gauge pin, single — 14.47 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin 14.47 mm is a precision reference pin for end‑dimension verification and routine inspection tasks in workshop environments Workshop version for robust daily use Diameter 14.47 mm and length 50 mm High accuracy ±0.002 mm Supplied in protective transport case Consistent precision for routine inspection The inspection pin offers a diameter of 14.47 mm paired with a tolerance of ±0.002 mm, providing repeatable reference measurements for dimensional checks and go/no‑go comparisons. This degree of accuracy corresponds to just a few micrometres of deviation, which reduces uncertainty during short‑run sampling and fixture set‑up. Calibrated master references and tight tolerances shorten decision cycles and lower scrap rates by enabling faster, verifiable acceptance criteria on the shop floor. Durable workshop design for everyday handling Constructed in special steel, the pin is designed as a workshop execution item that resists wear under frequent use and simple handling. At 50 mm overall length and around 0.1 kg, the pin is compact enough for tool boards yet substantial enough to remain stable in hand and in typical holding devices. Delivery in a protective transport case preserves the reference surface during storage and shipment, helping to maintain accuracy between inspections and to extend the component’s service life. Practical integration into inspection routines Supplied as a single reference pin (SKU M323.E47, GTIN 4061905067679), the item suits end‑dimension verification and reference checking where a compact, high‑accuracy gauge is required. The plain cylindrical geometry simplifies seating in small fixtures and makes it straightforward to record repeat readings during process capability checks. Traceable identification via SKU and GTIN supports inventory control and documentation in quality management systems while the workshop focus ensures a pragmatic balance between precision and robustness. For dependable end‑dimension checks, request the Metav IndustryLine gauge pin (M323.E47) from Metav Werkzeuge — Metav Werkzeuge can be contacted at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for ordering and technical advice Technical data Article number: M323.E47 GTIN: 4061905067679 Manufacturer: Metav IndustryLine Weight: 0.1 kg Material: Special steel Length: 50 mm Diameter: 14.47 mm Accuracy: ±0.002 mm Workshop version Facts Length: 50 mm Diameter: 14.47 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Single gauge pin Supplied in protective transport case for transport Intended for end‑dimension verification SKU: M323.E47 FAQ What is the declared accuracy of the gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, making it suitable as a tight reference for workshop inspection. What material is the pin made from? The pin is manufactured from special steel, chosen for wear resistance and stable dimensions under normal workshop conditions. How is the item supplied for transport and storage? The pin is supplied as a single unit and shipped in a protective transport case to safeguard the reference surfaces during transit. Which applications suit this gauge pin best? Typical uses include end‑dimension verification, reference checks during fixture set‑up and routine inspection of small components. What identifiers are available for inventory and traceability? The product is listed as SKU M323.E47 and GTIN 4061905067679 for stock management and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.48mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise end‑measure verification combined with workshop‑grade durability and compact handling. With a nominal diameter of 14.48 mm, a length of 50 mm and a verified tolerance of ±0.002 mm, this gauge pin delivers repeatable results for fixture checks and final dimension control; order directly via Metav Werkzeuge or request guidance from our consultants for seamless integration. Precision gauge pin, single — 14.48 mm diameter, 50 mm length (Metav IndustryLine) A Precision gauge pin, single designed for end‑dimension checks and fixture verification in workshop and inspection environments Workshop version, robust construction Diameter 14.48 mm nominal size Length 50 mm for compact measurements Tolerance ±0.002 mm for precise checking Consistent accuracy for demanding inspection tasks The precision pin is manufactured to tight tolerances, offering a verified dimensional accuracy of ±0.002 mm, which makes it suitable for high‑accuracy end‑measure checks and repeat inspections. Its nominal diameter of 14.48 mm and compact 50 mm length reduce leverage effects and make positioning in fixtures straightforward, improving repeatability when comparing batches or calibrating go/no‑go devices. The metal alloy used — special steel — ensures dimensional stability under typical workshop conditions and supports long service intervals. Robust workshop design for everyday use Engineered as a workshop version, this pin withstands routine handling and insertion cycles typical on production floors. The compact format keeps the centre of gravity close to the measuring point, simplifying manual placement and alignment in gauge housings or assembly fixtures. Delivery in a transport box (plastic or wooden) protects the pin in transit and reduces the risk of nicks or contamination before first use, ensuring the pin arrives ready for immediate deployment in quality control routines. Practical applications and compatibility This precision pin is intended for end‑dimension verification, fixture set‑up, and use within plug‑gauge checks where a defined nominal shaft is required. The item integrates easily into existing gauge sets and inspection benches and pairs well with micrometres, dial gauges and optical comparators for cross‑checking. Clear traceability is supported by the product identifiers provided, aiding inventory and audit processes in production and metrology departments. For reliable end‑measure verification with workshop‑grade durability, choose the Metav IndustryLine precision gauge pin and contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.E48 GTIN: 4061905067686 Label: Precision gauge pin, single, 14.48 mm × 50 mm Material: Special steel Facts Diameter: 14.48 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution for robust use Delivered in transport box (plastic or wooden) Suited for end‑measure checks and fixture verification SKU: M323.E48 FAQ What is the nominal diameter of this gauge pin? The nominal diameter is 14.48 mm for the precision gauge pin (M323.E48) from Metav IndustryLine. What tolerance can be expected for measurement checks? The pin is manufactured to a tolerance of ±0.002 mm, providing high‑precision end‑dimension verification. What material is used for the pin? The pin is made from special steel, chosen for dimensional stability and workshop resilience. How is the item delivered and protected in transit? The gauge pin (M323.E48) is supplied protected in a transport box (plastic or wooden), reducing the risk of damage before use. Which applications suit this precision pin? Typical uses include end‑measure checks, fixture set‑up and inclusion in plug‑gauge assemblies for production and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.4mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of a compact, workshop-grade measuring solution that combines a 14.4 mm nominal size, 50 mm working length and a tight accuracy of ±0.002 mm for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration advice. Gauge pin, single, 14.4 mm — Gauge pin, 50 mm length (Metav IndustryLine) A gauge pin 14.4 mm, 50 mm length designed as a workshop‑grade inspection pin for end‑measure and go/no‑go checks in machining and assembly. Workshop version for robust use Diameter 14.4 mm, length 50 mm Accuracy ±0.002 mm Hardened special steel construction Precision where micro dimensions matter This compact inspection pin belongs to the micro measurement class (nominal sizes from 10–100 mm), making it especially suited to fine mechanical work where small tolerances decide part acceptance. The nominal diameter of 14.4 mm and the 50 mm overall length provide a stable contact length that minimises bending and enables reproducible end‑measurements. The specified deviation of ±0.002 mm highlights its role in high‑precision workshop controls and short‑run quality checks, where rapid, verifiable results support efficient production decisions. Built for repeatable workshop inspection Constructed from special steel and supplied in a workshop configuration, the pin is intended for frequent handling and routine gauging tasks. The material choice and heat treatment deliver surface hardness and wear resistance, so that dimensional drift is reduced under repeated use. In practice, this means consistent insertion and withdrawal behaviour during serial checks and a lower replacement frequency compared with untreated pins, supporting uninterrupted workflow on the shopfloor. Easy identification and catalogue integration Small components must be straightforward to specify and reorder. The pin is listed under catalogue SKU M323.E40 and GTIN 4061905066818, which simplifies procurement and traceability. At 0.1 kg it is easy to handle and store within tool sets. The simple geometry requires no special fixturing for most end‑measure tasks, so it integrates readily into established inspection jigs or handheld checking routines, enabling immediate uptake without process redesign. Contact Metav Werkzeuge for tailored advice on incorporating the Metav IndustryLine gauge pin into existing inspection routines or for assistance with bulk procurement and delivery logistics: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany; +49 2822 7131930; info@metav-werkzeuge.com Technical data Article number: M323.E40 GTIN: 4061905066818 Brand: Metav IndustryLine Facts Nominal diameter: 14.4 mm Length: 50 mm Weight: 0.1 kg Accuracy deviation: ±0.002 mm Special features Material: special steel Workshop version Category: gauge pins FAQ What are the main dimensions of this gauge pin? The gauge pin has a nominal diameter of 14.4 mm and an overall length of 50 mm; it is listed as SKU M323.E40. How precise is the inspection pin for end‑measure checks? The inspection pin provides an accuracy deviation of ±0.002 mm, suited to precise workshop gauging and tight go/no‑go assessments. Which material is used and how durable is the pin? The pin is made from special steel in a workshop configuration; the material and treatment deliver surface hardness and wear resistance for frequent use. For which applications is this pin most suitable? Designed for end‑measure and slot/checking tasks, the pin is ideal for machining, assembly inspection and repeatability checks within micro measurement ranges. How can the product be identified for reordering? Reference SKU M323.E40 and GTIN 4061905066818 when reordering or specifying the gauge pin in procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.5-19.5mm Test Pin Holder With Good/Reject Indication - Metav IndustryLine
Take advantage of a compact, repeatable gauging solution that combines precise pin compatibility and clear pass/fail indication for faster inspection cycles. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Measuring-pin holder for 14.5–19.5 mm pins with Good and Reject marking — Metav IndustryLine clamp for workshop gauging The Measuring-pin holder for 14.5–19.5 mm pins with Good and Reject marking is a compact fixture designed to secure measuring pins and provide instant visual pass/fail feedback for bench and production gauging tasks. Secure clamp for Ø14.5–19.5 mm pins Integrated 'Good' / 'Reject' visual marking Compact 150 mm length, 0.2 kg mass Robust design for repetitive workshop use Consistent positioning reduces measurement variance A stable locating fixture is essential for repeatable checks. The holder provides a defined seating for measuring pins with diameters from 14.5 mm to 19.5 mm, ensuring the same pin axis and contact point on every insertion. This repeatability reduces setup time and measurement scatter, supporting faster batch inspection and consistent quality control. The compact form factor keeps the centre of mass low, improving handling and alignment when used on gauging rigs or test benches. Clear pass/fail marking speeds inspection throughput Visual differentiation between acceptable and rejected parts shortens decision time on the shop floor. The integrated 'Good' / 'Reject' marking gives an immediate, unambiguous indication during manual checks, which reduces interpretation errors and accelerates operator throughput. For process-controlled environments this kind of visible signalling complements digital records by decreasing the number of steps in a manual inspection routine and helps maintain steady production rhythm. Workshop-grade construction for reliable daily use Designed for everyday industrial use, the fixture balances light weight with sufficient rigidity. At 150 mm length and roughly 0.2 kg, the unit remains easy to manoeuvre while providing a secure clamp for measuring pins. The design supports repeated insertion cycles and holds the pin without wobble, which preserves the integrity of the measuring tip and the accuracy of subsequent checks. Simple handling reduces operator fatigue and helps maintain inspection consistency across shifts. Compatibility and practical integration into gauging setups The holder is intended for use with standard measuring pins and integrates smoothly into existing gauges and fixtures. As a purpose-built accessory for gauging tasks, it complements bench and modular gauge systems by offering a fixed interface for cylindrical pins in the 14.5–19.5 mm range. The solution is particularly suited to small-batch inspections and fixture-based routines where quick changeover and clear results are priorities. Contact Metav Werkzeuge for tailored gauging advice and procurement of the M318.565 measuring-pin holder, including assistance with selecting compatible pins and integrating the holder into inspection fixtures. Technical data Article number: M318.565 GTIN: 4054469167169 Category: Gauging / Measuring pins Tariff number: 90173000 Facts Length: 150 mm Weight: 0.2 kg Compatible pin diameter: 14.5–19.5 mm Special features Integrated Good / Reject visual marking Compact holder for workshop gauging Suitable for repetitive manual inspection FAQ What pin diameters does the holder accept? The holder accepts measuring pins with diameters from 14.5 mm to 19.5 mm and is specified for use with standard cylindrical gauging pins. Is the M318.565 suitable for production-line checks? Yes, the M318.565 measuring-pin holder from Metav IndustryLine is designed for repetitive workshop use and supports quick visual pass/fail decisions to keep inspection throughput high. Can the marking be customised for a specific inspection scheme? The unit is supplied with a clear 'Good' / 'Reject' marking; for customised labelling or additional signalling, consult Metav IndustryLine support to discuss options and compatibility. Does the holder require special pins or adapters? Standard measuring pins within the 14.5–19.5 mm range fit the holder; no special adapter is needed for those diameters, though tailored fixture interfaces can be advised by Metav Werkzeuge if integration into bespoke gauges is required. What are the main advantages of using this holder in a small workshop? The holder offers reliable repeatability, compact handling, and immediate visual pass/fail indication, which together reduce inspection time and lower the risk of human error during manual gauging. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.51mm Test Pin Single, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of precise dimensional control and workshop-ready durability: the combination of 14.51 mm nominal diameter, ±0.002 mm tolerance, and a robust special steel construction ensures repeatable inspection results and reliable fit checks. Order the gauge pin directly via Metav Werkzeuge or consult Metav's specialists for application advice. Gauge pin M323.E51 — single gauge pin, 14.51 mm Ø, 50 mm length (Metav IndustryLine) Gauge pin M323.E51 is a single, cylindrical gauge pin designed for accurate end measurements and fit checks in inspection and setup applications, supplied in a workshop-grade execution. Precision ±0.002 mm Diameter 14.51 mm, length 50 mm Special steel construction Workshop-grade finish Consistent measurement performance for routine inspections The M323.E51 delivers high repeatability thanks to its tight tolerance of ±0.002 mm, making it suitable for go/no-go checks, plug gauges and dimensional verification tasks where small deviations affect assembly quality. The defined length of 50 mm provides a stable reference when inserted into bores or assemblies, reducing measurement scatter compared with shorter pins. By specifying a single, calibrated geometry in production tooling, process variability is minimised and inspection throughput becomes more predictable. Durable, workshop-oriented construction for everyday use Manufactured from special steel, this single gauge pin is finished to withstand the rigours of workshop environments while maintaining its critical diameter. The workshop-grade execution balances surface integrity with practical handling: the robust material resists wear in repetitive seating operations and preserves the nominal dimension over extended use. This contributes to longer service intervals for gauges and less frequent replacement — an efficiency gain for maintenance and quality teams. Simple integration into test setups and fixtures The cylindrical form and standard dimensions ensure compatibility with common test jigs, fixture bores and alignment tools. The single-pin design simplifies storage and selection in inspection kits and can be used as a master element for quick in-process checks. Clear nominal marking and the compact geometry make handling straightforward during serial inspections, which supports faster cycle times without sacrificing measurement confidence. Traceability and workshop readiness This product is supplied under the Metav IndustryLine designation and carries a unique SKU for inventory control, supporting traceable tooling management in the workshop. The straightforward specification — 14.51 mm diameter, 50 mm length, ±0.002 mm tolerance — allows quality managers to document gage characteristics in inspection plans and control plans, aiding conformity demonstrations and repeatable production control. For workshop-grade repeatability and dependable fit verification, request the Metav IndustryLine gauge pin M323.E51 from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for stock and technical guidance at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M323.E51 GTIN: 4061905067716 Manufacturer: Metav IndustryLine SKU: M323.E51 Facts Diameter: 14.51 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Single gauge pin Category: gauge pin / inspection pin FAQ What applications is this gauge pin suitable for? The M323.E51 gauge pin is intended for end-measurement checks, fit verification and fixture set-up tasks where a defined cylindrical reference of 14.51 mm and 50 mm length is required. How accurate is the pin for dimensional checks? The pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for routine inspection and plug-gauge comparisons. Which material is used for the gauge pin and what is the benefit? The pin is made from special steel, offering robust wear performance in workshop conditions and preserving the critical diameter during repeated seating operations. Can the gauge pin be used in standard test fixtures? Yes, the standard cylindrical geometry and the specified dimensions make the pin compatible with common jigs and fixture bores for quick integration into existing inspection workflows. Is the product identified for inventory and traceability? The gauge pin is listed under SKU M323.E51 with GTIN 4061905067716 to support inventory control and traceability in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.52mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, ±0.002 mm dimensional accuracy and a compact 14.52 mm diameter for reliable end‑dimension checks; order directly via Metav Werkzeuge or contact the consultants for application advice. Test pin, single — Ø 14.52 mm, length 50 mm (Metav IndustryLine) the Test pin, single, 14.52 mm, length 50 mm is a workshop‑grade gauge pin designed for repeatable end‑dimension inspection and integration into jigs and fixtures Workshop‑grade construction Diameter 14.52 mm, length 50 mm Dimensional accuracy ±0.002 mm Precision that keeps production moving The component is manufactured from special steel and finished to tight tolerances, delivering ±0.002 mm repeatability for end‑measurement tasks. This level of accuracy supports reliable acceptance testing and reduces the risk of part rejection during final inspection. Specified as a single gauge pin with a 14.52 mm diameter and 50 mm overall length, the item suits measurement rigs and manual plug checks where compact, high‑precision contact elements are required. Clear dimensional stability under workshop conditions helps maintain throughput and minimise rework. Built to withstand workshop use and easy to handle Produced in a workshop‑grade specification, the pin balances hardness and toughness for frequent use while remaining straightforward to handle at the bench. At approximately 0.1 kg, the weight is low enough for quick placement in fixtures yet sufficient to provide stable seating in sockets and gauges. The delivery includes a protective transport case to safeguard the pin during storage and transfer, ensuring the calibrated geometry remains intact between inspections. The single‑piece design simplifies fixture mounting and replacement procedures. Integrates into quality workflows with measurable benefits Intended for end‑dimension control and process checking, this test pin supports standard inspection sequences and can be incorporated into mechanical gauges or measurement jigs. Using a consistently manufactured contact element like this reduces measurement scatter and helps maintain traceable results across batches. The robust finish and defined geometry promote long service life in repetitive cycles, offering a tangible reduction in downtime and an improvement in first‑pass yield. For workshops seeking dependable, compact metrology components, this pin provides a pragmatic solution with clear performance data. For dependable end‑dimension checks choose the Metav IndustryLine test pin and contact Metav Werkzeuge for application guidance and secure supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M323.E52 GTIN: 4061905067723 Brand: Metav IndustryLine Facts Diameter: 14.52 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Special steel construction Workshop‑grade execution Single test pin Supplied in protective transport case FAQ What tolerances can be expected from this test pin? The test pin from Metav IndustryLine delivers a tolerance of ±0.002 mm, suitable for precise end‑dimension inspections and integration into measurement fixtures. Is the pin suitable for integration into existing inspection jigs? Yes, the single pin design is intended for easy mounting in gauges and jigs; the defined 14.52 mm diameter and 50 mm length make it compatible with standard socket arrangements. How is the pin delivered and protected during transport? The test pin is supplied in a protective transport case to preserve the finished geometry and reduce handling damage prior to installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.53mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the compact Micro‑range design, the ±0.002 mm accuracy and the robust special‑steel construction for reliable end‑measure checks and fixture setting. Order directly via Metav Werkzeuge or consult the specialists for integration into inspection workflows. Gauge pin, single — Ø 14.53 mm, 50 mm length (Metav IndustryLine) A gauge pin (single) designed for precise end‑measure checks and fixture setting in fine mechanical and workshop environments. Workshop version for robust everyday use Diameter 14.53 mm with ±0.002 mm accuracy 50 mm length in special steel construction Single‑piece gauge pin for precise end measurements Precision where small differences matter This single gauge pin, with a diameter of 14.53 mm and a stated tolerance of ±0.002 mm, is tailored for tasks that demand repeatable, micrometric control. Classified in the Micro range (10–100 mm), the design balances a compact form with the stiffness required for fine mechanical measurement and fixture work. The close tolerance reduces measurement uncertainty, helping to shorten inspection cycles and increase throughput in repeat production. Built for workshop durability and repeatable contact Manufactured from special steel, the pin is configured as a workshop version that resists everyday wear while maintaining contact geometry. The solid construction and precise machining support consistent seating in bores and gauges, which in turn lowers variability in go/no‑go checks and alignment procedures. The 50 mm length offers enough engagement for secure location without excess overhang, preserving dimensional stability during repeated use. Practical integration into inspection and setup processes Delivered as a single piece, this pin is suitable for end‑measurement tasks, setting gauges and as a reference in assembly fixtures. Its compact size and consistent finish reduce set‑up time and simplify tool lists for jigs and gauges. For production environments seeking an efficient way to improve first‑article inspections or batch sampling, the combination of compact form and micron‑level precision supports faster decisions and fewer non‑conformances. Further technical advice and specification matching are available from Metav Werkzeuge if integration into existing systems is required. Contact Metav Werkzeuge to discuss specification matching or to secure supply of the Metav IndustryLine gauge pin (SKU M323.E53) for your inspection and fixture needs Technical data SKU: M323.E53 GTIN: 4061905067730 Brand: Metav IndustryLine Label: Gauge pin, single, Ø 14.53 mm, length 50 mm Facts Diameter: 14.53 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Application: end measurements and fixture setting Delivery: single piece FAQ What is the declared accuracy of this gauge pin? The declared dimensional tolerance for the Metav IndustryLine gauge pin (SKU M323.E53) is ±0.002 mm, suitable for high‑precision workshop checks. Which materials is the pin suitable for when used as a reference or gauge? As a precision reference, the pin is material‑agnostic in use; it is manufactured from special steel to provide stable, wear‑resistant contact when measuring parts made from a wide range of metals and engineered plastics. Is the gauge pin supplied with a calibration certificate? A calibration certificate is not specified in the product data; customers requiring traceable calibration should contact Metav Werkzeuge to arrange calibration or to discuss available calibration options. Can this pin be used in go/no‑go fixtures and jig locating applications? Yes — the single‑piece design and tight tolerance make the item suitable as a go/no‑go reference or as a locating element in assembly jigs and fixture setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.54mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Combine precise diameter control (14.54 mm) with special-steel construction and a tight ±0.002 mm tolerance to achieve reproducible end-size checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.E54 Gauge Pin — 14.54 mm diameter, 50 mm length (Metav IndustryLine) The M323.E54 gauge pin is a workshop-grade reference for end-size inspection and fixture alignment, designed for repeatable measurements in inspection benches and production jigs Precision tolerance ±0.002 mm Special-steel construction for durability 14.54 mm diameter, 50 mm length Supplied in protective transport case Precision that reduces rework and speeds inspection The M323.E54 is engineered as a stable reference for end-dimension verification, offering a tolerance of ±0.002 mm that keeps acceptance decisions clear and repeatable. A tight tolerance translates directly into fewer ambiguous measurements, which reduces rework and shortens inspection cycles. The hardened special steel body delivers long-term dimensional stability, making the pin suitable for repetitive use on gauging fixtures and check plates without frequent replacement or readjustment. Workshop-ready robustness with compact handling With a 14.54 mm diameter and 50 mm length the pin balances stiffness and accessibility: the shorter form minimises deflection while remaining easy to position in tight setups. The workshop-grade execution resists abrasion and handling wear, and the supplied protective transport case preserves calibration and surface finish during storage or transit. This practical robustness supports continuous shop-floor use where speed and durability matter most. Integrates with common inspection workflows for clear results Designed to serve as a reference for end-measurement tasks, the pin fits into existing gauging routines and fixture arrangements with minimal adaptation. Its consistent geometry simplifies alignment of mating parts and aids in quick go/no-go checks, improving throughput on repetitive inspection tasks. At roughly 0.10 kg, the component is manageable by a single operator when setting up jigs, while its material and finish reduce the risk of marking delicate surfaces during use. For reliable reference measurements and tailored application advice, contact Metav Werkzeuge to source the Metav IndustryLine gauge pin M323.E54 — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M323.E54 GTIN: 4061905068676 Weight: 0.10 kg Material: Special steel Dimensions & accuracy Diameter: 14.54 mm Length: 50 mm Tolerance: ±0.002 mm Features & delivery Workshop-grade execution Supplied in protective transport case Category: Gauge pin FAQ What is the intended use of this gauge pin? The M323.E54 gauge pin is intended as a reference for end-size checks, fixture alignment and quick go/no-go inspections on production and inspection benches. What level of accuracy can be expected from the pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, providing repeatable reference measurements suitable for workshop inspection tasks. What material is the pin made from and why does that matter? This component is made from special steel; the material choice ensures wear resistance and dimensional stability under frequent use. Is the pin delivered ready to store and transport? The M323.E54 is supplied in a protective transport case to preserve its surface and geometry during storage and transit. Can the pin be used directly in fixture setups? Yes, the pin’s geometry and workshop-grade finish make it suitable for direct integration into existing fixtures and gauging routines. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.55mm Gauge Pin, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability and workshop-grade robustness provided by this precision gauge pin with Ø14.55 mm diameter and ±0.002 mm tolerance; the compact 50 mm length supports reliable end‑measure checks and fixture validation. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Gauge pin M323.E55 — Ø14.55 mm, 50 mm length Metav IndustryLine M323.E55 gauge pin for precision end‑measure and go/no‑go checks in workshop environments *Workshop execution for daily use *Ø14.55 mm diameter with fine tolerance *Tolerance ±0.002 mm accuracy *Delivered in protective case Precision where measurement errors are reduced The compact pin is engineered for consistent repeatability in short‑range dimensional checks. With a nominal Ø14.55 mm diameter and a verified ±0.002 mm tolerance, this component gives a clear rational advantage where tight fits or end‑standard checks are required. The small form factor and accurate diameter control mean fewer setup iterations when verifying bores, pins or assembly seats, which translates directly into measurable time savings during production and inspection runs. Robust construction that suits busy workshops Built as a workshop execution component, the pin is manufactured from special steel and finished to withstand regular handling. The 50 mm length provides a convenient balance between reach and rigidity, reducing the influence of bending in handheld or fixture use. Supplied in a protective case, the item arrives ready for safe storage and transport, improving longevity and preserving the calibrated surface where applicable. These design choices favour durability and low life‑cycle maintenance in everyday industrial settings. Practical integration, traceability and part identification Marked and tracked as M323.E55 (SKU) and referenced by GTIN 4061905068683, this gauge component integrates cleanly into tooling inventories and inspection routines. The compact geometry facilitates quick placement in gauges, jigs and assembly aids while the clearly defined tolerance supports documented quality procedures. For users seeking predictable gauge behaviour in repetitive checks, this Metav IndustryLine product serves as a reliable reference piece that complements standard measuring equipment and workshop workflows. For workshop-ready precision from the Metav IndustryLine, request the M323.E55 from Metav Werkzeuge in Emmerich — details and order handling via info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M323.E55 GTIN: 4061905068683 Category: Messstifte Core measurements Diameter: 14.55 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Delivered in protective case Storytrigger: end masses (end dimensions) FAQ What is the nominal size and tolerance of this gauge pin? The M323.E55 gauge pin has a nominal diameter of 14.55 mm and a stated tolerance of ±0.002 mm. Is the gauge pin suitable for repeated workshop use? Yes. The Metav IndustryLine M323.E55 is supplied in a workshop execution and packaged in a protective case to withstand regular handling. How should the M323.E55 be stored to preserve accuracy? Store the gauge pin in its protective case in a dry, stable‑temperature environment to prevent corrosion and maintain dimensional integrity. Can the M323.E55 be used as a reference in fixture alignment? The compact 50 mm length and fine tolerance make the M323.E55 suitable for fixture alignment and short‑range positioning checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.56mm Test Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of high repeatability, robust workshop design and tight tolerance for dependable end‑measure checks. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for seamless integration into existing inspection routines. Gauge pin, individual — 14.56 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for reliable end‑measure and fit verification in workshop environments, finished for everyday industrial use. Workshop-grade construction Diameter 14.56 mm, length 50 mm Tolerance ±0.002 mm for tight fits Made from specialist steel Reliable precision for fit and final checks The measuring pin delivers consistent precision across repetitive fit‑checks thanks to its nominal diameter of 14.56 mm and a displacement tolerance of ±0.002 mm. This level of accuracy supports reproducible go/no‑go assessments and final dimensional verification on shafts, bores and mating parts. The tight tolerance reduces rework cycles and streamlines quality control steps, ensuring components pass assembly criteria first time. Built for the workshop — robust and easy to handle Specified as a workshop version, the pin is manufactured from specialist steel to withstand regular handling and contact with tooling surfaces. At a length of 50 mm the probe remains compact for confined checks while providing sufficient engagement for secure measurement. A protective transport case is provided for safe storage and transport, preserving the measuring surface and maintaining geometric integrity between uses. Practical integration into inspection workflows The individual gauge pin is ideal for targeted end‑dimension testing in routine inspection sequences or as a reference master in small series production. Lightweight and straightforward to identify in inventory, the component supports quick process checks and reduces downtime caused by uncertain fits. For traceable identification use the SKU and GTIN in procurement and documentation processes to maintain clear records. Contact Metav Werkzeuge in Emmerich for specification matching or to secure workshop‑grade gauge pins for your inspection line — our consultants are available at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M323.E56 GTIN: 4061905068690 Category: Messstifte Designation: Gauge pin, individual, 14.56 mm diameter, 50 mm length Facts Diameter: 14.56 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: specialist steel Protective transport case included SKU: M323.E56 FAQ What is the nominal diameter and length of the pin? The gauge pin has a nominal diameter of 14.56 mm and a length of 50 mm, suitable for end‑measure and fit verification. What tolerance can be expected from this measuring pin? The individual gauge pin is specified with a tolerance of ±0.002 mm, providing tight reproducibility for fit checks. Is the pin supplied ready for workshop use? Yes, the workshop version is finished from specialist steel and delivered with a protective transport case to preserve the measuring surfaces. Which applications suit this type of gauge pin? This measuring pin is intended for end‑measure checks, fit verification and final inspection of mating parts in production and assembly environments. How can the product be identified for procurement? Use the SKU M323.E56 and GTIN 4061905068690 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.57mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Precision performance meets robust workshop use: the tight ±0.002 mm tolerance together with a special steel body and a compact 50 mm length ensure reproducible end‑dimension checks and a long service life in routine inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.E57 gauge pin — 14.57 mm diameter, 50 mm length (Metav IndustryLine) A M323.E57 gauge pin for precise end‑size verification and short‑reach inspection tasks in workshop and quality control environments Precision 14.57 mm diameter, ±0.002 mm Robust special steel construction 50 mm working length for compact checks Workshop version for routine inspection Reliable metrology for repeatable end‑measurements The pin delivers a clearly defined reference diameter of 14.57 mm with an extremely tight manufacturing tolerance of ±0.002 mm, providing a measurable baseline for pass/fail checks and quick go/no‑go decisions. Such accuracy reduces ambiguity in dimensional control and lowers the risk of rework by ensuring that a single insertion provides a reproducible measure of bore or hole size. The stated tolerance refers to the diameter stability under normal inspection handling and is appropriate for workshop inspection where consistent repeatability is required. Durable design for everyday inspection workflows Manufactured from special steel, the component is engineered for wear resistance and dimensional stability during repeated use in production or inspection jigs. The 50 mm overall length balances accessibility with stiffness, so the pin resists bending when used in confined spaces or within fixtures. The workshop specification indicates a design optimised for routine handling: easy insertion, stable seating in gauges, and compatibility with standard fixture layouts, which together help maintain throughput on the shop floor. Practical integration and traceable identification Supplied as a single precision testing pin with SKU M323.E57, the item is suitable for quick verification tasks, layout checks and as a reference member in fixture sets. The compact form factor allows integration into bench fixtures or portable inspection kits without adding significant mass (approx. 0.1 kg), simplifying handling and storage. Where a repeatable physical gauge is required for go/no‑go inspections or end‑size confirmation, this test pin offers a straightforward, low‑complexity solution that complements digital measuring systems and manual comparator setups. For a supply quote or to discuss batch availability of the M323.E57 gauge pin from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and prompt delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.E57 GTIN: 4061905068706 Brand: Metav IndustryLine Facts Diameter: 14.57 mm Length: 50 mm Weight: 0.1 kg Diameter tolerance: ±0.002 mm Special features Workshop version Single piece supply Material: Special steel Category: Gauge pin / Test pin FAQ What tolerance can be expected from this gauge pin? The M323.E57 gauge pin is manufactured to a diameter tolerance of ±0.002 mm, suitable for repeatable end‑size checks in a workshop environment. Is the pin suitable for use in production fixtures and jigs? Yes, the workshop design and 50 mm length make this test pin appropriate for integration into benches, fixtures and portable inspection kits where a compact, stiff reference is required. Which material is used and what are the benefits? The pin is made from special steel, which offers enhanced wear resistance and dimensional stability under regular inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.58mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
The combination of precise diameter control (14.58 mm), tight dimensional tolerance (±0.002 mm) and a robust 50 mm length delivers reliable end‑measurement performance for workshop inspection and gauge applications. Order the test pin directly via Metav Werkzeuge or consult the Metav team for specification guidance. Test pin M323.E58 – single, Ø 14.58 mm, 50 mm length (Metav IndustryLine) The test pin M323.E58 is a single workshop‑grade inspection pin designed for precise end‑measurements and gauge work in industrial metrology. High‑precision Ø 14.58 mm Tight tolerance ±0.002 mm Workshop‑grade special steel Precision where repeatability matters The test pin is engineered for repeatable end‑measurements and reference checks. With a nominal diameter of 14.58 mm and a recorded dimensional variation of ±0.002 mm, the pin supports tight tolerance inspections typically required in precision assembly and quality control. The specification is suitable for tasks that demand consistent contact geometry, such as plug gauges, alignment verifications and final acceptance checks, where a defined gauge diameter provides an objective reference point. Robust workshop design for regular handling Manufactured in special steel and delivered in a workshop version, the component withstands frequent handling and the rigours of a production environment. The 50 mm length offers a practical balance between grip and functional projection, while the modest mass keeps manipulation straightforward during fixture set‑up or manual inspection. The workshop specification prioritises durability and ease of use, reducing the need for frequent replacement and supporting uninterrupted inspection routines. Application and compatibility in inspection workflows The single test pin M323.E58 serves as a reliable datum or reference element in gauging fixtures, alignment tools and end‑size control procedures. Its nominal diameter and accuracy make it appropriate for comparative measurements against master gauges or for use as a reference plug in assembly checks. Lightweight and compact, the pin integrates easily into measurement benches and gauge sets, helping standardise checks across repeated production cycles and ensuring measurable conformity to specified end dimensions. For workshop‑grade precision components such as the M323.E58, contact Metav Werkzeuge to obtain the detailed specification sheet or to place an order via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: M323.E58 GTIN: 4061905068713 EClass: 21170231 Weight: 0.1 kg Facts Diameter: 14.58 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Special features Material: Special steel Workshop version Category: Test pin (Messstifte) FAQ What is the nominal diameter and tolerance of this inspection pin? The test pin has a nominal diameter of 14.58 mm with a measured variation of ±0.002 mm, suitable for tight end‑measurement tasks. Can the pin be used as a reference in plug gauges and fixtures? Yes, the M323.E58 is designed for use as a reference element in plug gauges, fixture alignment and end‑size control procedures. What material is the pin made from and how does that affect longevity? Manufactured from special steel, the workshop‑grade construction improves resistance to wear and supports repeated handling in production environments. Is this component intended for handheld inspection or fixed gauge assemblies? The combination of compact 50 mm length and precise diameter makes the pin appropriate for both handheld checks and as an installed reference within fixed gauge assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.59mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact, high-precision inspection tool that combines ±0.002 mm tolerance with a 14.59 mm ground diameter and a sturdy 50 mm length for dependable bore verification; order directly via Metav Werkzeuge or consult our specialists for batch supply and technical advice. Gauge pin, single, 14.59 mm, length 50 mm – Workshop test pin by Metav IndustryLine A gauge pin designed for precise bore verification and end-dimension checks in workshop and quality-control settings. High precision ±0.002 mm tolerance Diameter 14.59 mm ground to size Robust special steel construction 50 mm overall length for stable insertion Accuracy that secures production tolerance The pin’s ±0.002 mm tolerance provides a measurable basis for acceptance decisions in inspection routines. With a 14.59 mm ground diameter, this gauge pin is suitable for narrow tolerance bores where repeatability matters; the tight tolerance reduces uncertainty during go/no-go checks and supports consistent part quality across production batches. Clear dimensional specification simplifies documentation and traceability in quality records. Built for workshop reliability and handling Constructed from special steel and specified as a workshop version, the component resists everyday handling and maintains form under routine use. The 50 mm length gives sufficient engagement depth for common bore checks while keeping the pin compact and easy to manoeuvre. A mass of 0.1 kg makes the part robust without being unwieldy, aiding fast inspection cycles in shop-floor environments. Practical identification and traceability Identification is straightforward: item SKU M323.E59 and GTIN 4061905068720 facilitate ordering and inventory management. The single-pin format delivers flexibility for ad-hoc checks or custom sets; complementary pins can be combined to form complete validation kits. Clear labelling and standard dimensions help integrate the pin into existing inspection procedures and measuring fixtures. Where this test tool delivers measurable benefit Using a precisely ground pin for bore verification shortens inspection time and reduces subjective judgement in assembly and incoming inspection tasks. The combination of compact design and industrial-grade material supports regular use on the shop floor and contributes directly to improved efficiency and tighter quality control in production workflows. Contact Metav Werkzeuge in Emmerich for tailored batch supply or technical advice on the Metav IndustryLine gauge pin M323.E59 — tel +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M323.E59 GTIN: 4061905068720 Brand: Metav IndustryLine Facts Diameter: 14.59 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Packaging: single item FAQ What is this pin used for? The gauge pin M323.E59 is intended for precise bore verification and end-dimension checks in workshop inspection and quality-control applications. What tolerance can be expected? This Metav IndustryLine gauge pin is manufactured to a tolerance of ±0.002 mm, suitable for tight acceptance limits. Which material is the pin made from? The pin is produced from special steel, selected for durability and stable dimensional performance under normal workshop conditions. How is the item identified for ordering? Order as Metav IndustryLine gauge pin M323.E59; the GTIN is 4061905068720 for catalogue and logistics reference. Is the length suitable for common bore checks? The 50 mm overall length provides reliable engagement depth for many routine bore inspections while remaining compact for handheld handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.5mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of robust special steel construction, tight ±0.002 mm dimensional control and a compact 50 mm length for reliable workshop inspection tasks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.E50 Gauge Pin — 14.5 mm diameter, 50 mm length (Metav IndustryLine) M323.E50 Gauge Pin is a single plug gauge intended for precise bore and end‑dimension checks in workshop metrology and inspection routines. Workshop version for robust use Diameter 14.5 mm with ±0.002 mm tolerance 50 mm hardened special steel length Single piece for selective checking Consistent dimensional verification for production work The plug is made from special steel and engineered for repetitive measuring tasks where repeatability matters. With a diameter of 14.5 mm and a verified tolerance of ±0.002 mm, the component provides a clear go/no‑go reference that reduces ambiguity during inline or batch checks. Using a hardened test pin simplifies rapid verification of bores and alignment features, enabling faster decision cycles on the shop floor and reducing rework rates through early detection. Durable build for frequent handling and workshop environments Designed as a workshop version, the test pin resists common stresses in production environments while maintaining the dimensional integrity required for reliable checking. The 50 mm length offers a practical balance between reach and stiffness, so the plug is comfortable to handle and remains stable during measurement. The compact format also minimises the footprint in inspection kits and reduces the potential for accidental deformation compared with longer, slimmer probes. Practicality and traceability in routine inspection Delivered as a single item, the plug gauge is simple to document and track inside quality processes; the GTIN 4061905067709 and SKU M323.E50 support inventory and traceability workflows. Its modest weight makes it easy to include in inspection sets or carrying cases without adding unnecessary bulk. Clear labelling and consistent geometry mean repeat readings can be relied upon in standard checks and quick pass/fail assessments. Integration into quality workflows and maintenance of standards As a straightforward measuring artefact, the plug gauge performs the specific task of dimensional verification with minimal setup. It complements micrometers and calipers where a fixed‑size reference is required and reduces operator interpretation by providing a tangible acceptance limit. For teams aiming to streamline quality control, the gauge pin functions as a deterministic tool that improves throughput and supports documented measurement routines. For workshop‑grade precision and quick procurement, contact Metav Werkzeuge in Emmerich — our advisors assist with selection and supply details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.E50 GTIN: 4061905067709 Category: Gauge pin (Messstifte) Label: Gauge pin, single, 14.5 mm, length 50 mm Data Diameter: 14.5 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution (Werkstatt‑Ausführung) Delivery form: Single piece eClass: 21170231 FAQ What size and tolerance does this gauge pin provide? The M323.E50 gauge pin has a diameter of 14.5 mm and a verified dimensional tolerance of ±0.002 mm, suitable for precise go/no‑go checks. Is the plug suitable for routine workshop use? Yes; the M323.E50 is specified as a workshop version, built in special steel to withstand frequent handling in inspection and production settings. How is the product identified for inventory and traceability? Identification is provided by SKU M323.E50 and GTIN 4061905067709, which support standard stock and quality documentation practices. What is the length and handling advantage of this test pin? At 50 mm length the plug achieves a practical compromise between reach and stiffness, making it easy to use for quick bore verifications without flexibility issues. Can this gauge pin be used as a reference in measurement kits? Yes; its single‑piece delivery, compact dimensions and tight tolerance make it a reliable fixed reference in inspection sets and quality control procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.61 mm Gauge Pin, 50 mm Length, Workshop Version, Special Steel, ±0.002 Accuracy, Supplied in Case - Metav IndustryLine
Precision checks benefit from the combination of tight tolerance, robust special steel construction and a compact 50 mm length for repeatable end‑measure control; order the probe pin directly via Metav Werkzeuge or consult our specialists for application advice. Probe pin M323.E61 — 14.61 mm diameter, 50 mm length (Metav IndustryLine) A probe pin M323.E61 designed for precise end‑measure checks and fixture inspection in workshop and production metrology. Workshop version, robust construction Diameter 14.61 mm for precise fits Tight tolerance ±0.002 mm Proven accuracy for repeatable inspection results The probe pin delivers measured performance where small deviations matter: a diameter of 14.61 mm combined with an accuracy of ±0.002 mm ensures reproducible contact geometry in go/no‑go fixtures and inspection jigs. This level of precision reduces uncertainty in acceptance testing and shortens troubleshooting cycles, because fewer borderline results require remeasurement. The compact 50 mm length keeps the pin rigid under contact forces, improving repeatability compared with longer, more flexible pins. Durable construction for workshop environments Manufactured from special steel, the pin resists wear from repeated contact and retains dimensional stability in everyday shop use. The workshop configuration prioritises resilience and service life, meaning fewer replacements and consistent performance across batches. The modest mass (0.1 kg) supports easy handling during fixture changes while keeping inertial effects low during rapid inspection routines. Designed for easy integration with gauges and fixtures This inspection pin suits end‑measure applications, alignment tasks and fixture inserts where a defined contact diameter is required. Its standardised geometry makes it compatible with common clamping systems and insertion bores; where interchangeability is needed, the precise 14.61 mm nominal size reduces trial fitting. In production lines, the pin can be used for dimensional spot checks and as a reference element in custom gauge assemblies, simplifying quality control workflows. Traceability and identification for process control The item is supplied with a clear identifier (SKU M323.E61) and GTIN for inventory and quality records, supporting traceable tool management. Documentation of material and measured dimensions assists in defining replacement intervals and audit trails. For operations that require consistent bench marking, this probe pin serves as a stable reference component that supports predictable inspection outcomes. Choose Metav IndustryLine's precision probe pin for reliable end‑measure control and contact Metav Werkzeuge for tailored application guidance or ordering assistance. Technical Data Article number: M323.E61 GTIN: 4061905068744 Category: Probe pins Manufacturer: Metav IndustryLine Facts Diameter: 14.61 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: special steel Single piece delivery eClass: 21170231 FAQ What level of accuracy can be expected from this probe pin? The probe pin is specified with an accuracy of ±0.002 mm, making it suitable for tight tolerance inspection tasks where reproducible contact diameter is required. Is the pin suitable for heavy‑duty workshop use? Yes. The workshop version and special steel construction provide enhanced wear resistance and robustness for repeated inspection cycles in production environments. Can this probe pin be used in standard gauge blocks and fixtures? The nominal 14.61 mm diameter and standard geometry of the probe pin allow straightforward integration into common fixture bores and clamping systems for go/no‑go and alignment applications. How is the item identified for inventory and traceability? The product is listed under SKU M323.E61 and GTIN 4061905068744, enabling clear recording in tool control systems and procurement records. What benefit does the 50 mm length provide compared with longer pins? A 50 mm length offers a balance of reach and stiffness: it reduces bending under contact, improving repeatability while remaining easy to handle and change in fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.62mm Inspection Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-suited measuring solution that combines a 14.62 mm nominal diameter, a 50 mm length and a verified ±0.002 mm tolerance for repeatable end measurements; order the part directly via Metav Werkzeuge or consult the Metav team for specification support. Gauge pin, single — 14.62 mm diameter, 50 mm length (Metav IndustryLine) The single gauge pin designed for precise end measurements and everyday workshop use, offering a compact footprint and industrial-grade accuracy. Workshop-grade construction Diameter 14.62 mm precision fit Length 50 mm for compact setups Tolerance ±0.002 mm Precision that delivers reliable end-measure results This compact measuring element is engineered to support accurate end measurements where repeatability matters. The 14.62 mm nominal diameter and the ±0.002 mm tolerance specify the permitted deviation between manufactured units and establish the component’s suitability for close‑fit gauges and verification tasks. In practice, a tolerance of ±0.002 mm indicates a high level of dimensional control that reduces rework and accelerates inspection cycles, making this component appropriate for calibration jigs and small‑part test fixtures where tight clearances are common. Robust construction tailored to workshop conditions Manufactured from special steel, the pin is intended as a workshop‑version part that withstands routine handling and integration into test rigs. The chosen material supports dimensional stability under normal workshop stresses and contributes to long service life when used for repetitive locating or checking operations. The compact 50 mm length keeps the component easy to manoeuvre and mount in confined setups, while its single‑piece design simplifies storage and traceability in tool cabinets or inspection sets. Practical handling, traceability and system fit With a nominal 14.62 mm diameter and a short overall length, the pin is straightforward to insert, align and measure within gauge assemblies or as a reference mandrel. The product is supplied as a single item for flexible use in bespoke setups; the included GTIN facilitates inventory control and procurement workflows. Lightweight and small‑format, the component integrates cleanly into modular inspection stations and supports quick replacement without lengthy downtimes, improving throughput on the shop floor. Choose the Metav IndustryLine gauge pin for compact, high‑accuracy end measurements and contact Metav Werkzeuge in Emmerich for purchasing and technical guidance Technical data SKU: M323.E62 GTIN: 4061905068751 Material: Special steel Nominal diameter: 14.62 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Core measurements Diameter: 14.62 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Features Workshop version Single gauge pin Category: Gauge pins (Messstifte) GTIN for traceability FAQ What is the nominal diameter and tolerance of this gauge pin? The gauge pin has a nominal diameter of 14.62 mm and a specified tolerance of ±0.002 mm for high repeatability. Is this component suitable for end‑measurement applications? Yes. The single gauge pin is intended for end measurements and small‑part checking in workshop and inspection contexts. What material is used and how does it affect use? The pin is made from special steel, which gives the part a robust workshop‑suitable construction and stable dimensional behaviour under normal handling. How is the item identified for procurement and inventory? The product is supplied with a GTIN (4061905068751) and the SKU M323.E62 to support ordering and stock management. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.63mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the ±0.002 mm accuracy and special steel construction for reliable fit checks and repeatable end‑measure verification in workshop environments; the compact 50 mm overall length and nominal 14.63 mm diameter make this gauge pin a practical choice for inline inspection and assembly control. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 14.63 mm, 50 mm length — Workshop‑grade inspection pin, ±0.002 mm | Metav IndustryLine The gauge pin, single, Ø 14.63 mm, 50 mm length is a workshop‑grade precision inspection pin designed for end‑measure checks and fit verification in machining, assembly and inspection tasks. Workshop‑grade finish Diameter 14.63 mm nominal Tolerance ±0.002 mm 50 mm overall length Accurate control that reduces rework and inspection time A compact inspection pin with a nominal diameter of 14.63 mm and a specified tolerance of ±0.002 mm enables fast go/no‑go checks and precise reference measurements at the machine or test station. The tight tolerance reduces uncertainty during fit verification, which translates into fewer rejects and lower rework rates. For production lines and small‑batch workshops, this level of reproducibility supports consistent assembly quality without complex measuring devices. Robust construction for everyday workshop use Manufactured from special steel, this pin combines wear resistance with dimensional stability under typical shop conditions. The 50 mm length provides sufficient engagement for end‑measure tasks while keeping the tool easy to handle and store. The workshop version finish balances durability with cost‑effective manufacture, making the pin suitable for routine inspections, gauge sets and short‑run quality checks where a hardwearing surface and clear nominal size are required. Practical handling and integration into inspection routines The single gauge pin is compact and straightforward to use in pick‑and‑place checks, fixture set‑ups and manual gauging procedures. Its simple geometry permits quick comparison against mating bores or seats and can be paired with basic inspection equipment or inserted into block sets for more structured measurement sequences. The robust design and clear nominal dimension simplify operator training and speed up routine controls, helping maintain throughput without compromising accuracy. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to discuss procurement of this gauge pin (SKU M323.E63) and suitability for specific inspection tasks. Technical data Article number: M323.E63 GTIN: 4061905068768 SKU: M323.E63 Weight: 0.1 kg Core dimensions and accuracy Nominal diameter: 14.63 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Features and applications Material: special steel Workshop‑grade finish Category: gauge pins (Messstifte) Typical use: end‑measure checks and fit verification FAQ What nominal diameter does this pin have? The gauge pin has a nominal diameter of 14.63 mm, suitable for checks of matching bores and seats. What accuracy is specified for the inspection pin? The inspection pin is specified with a tolerance of ±0.002 mm, enabling fine fit verification in workshop inspection tasks. Which material is used for the pin? This gauge pin is produced from special steel, chosen for wear resistance and dimensional stability in typical workshop conditions. For which applications is this gauge pin intended? The pin is intended for end‑measure checks, fit verification and simple go/no‑go inspections in machining, assembly and workshop quality control. What is the SKU for ordering and traceability? Order and traceability reference: SKU M323.E63 (GTIN: 4061905068768). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.64mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, robust workshop construction and fine tolerance for dependable end-measure checks and fixture set-up. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for compatibility advice and fast delivery. Gauge pin, single, 14.64 mm Ø, 50 mm length — Metav IndustryLine The Gauge pin, single, 14.64 mm Ø, 50 mm length is a workshop-grade end-measure pin designed for precise dimension checks, locating and fixture verification in inspection and production environments. Workshop-grade construction Diameter 14.64 mm for end-measure applications Accuracy ±0.002 mm Made from special steel Consistent accuracy for routine inspection A reliable gauge pin must deliver repeatable results under daily use; this workshop-version pin provides a stated accuracy of ±0.002 mm, enabling tight control in tolerance-critical checks. The solid cylindrical form and fixed length reduce variables during insertion and measurement, which translates into fewer re-measures and a more efficient inspection routine. For production lines and inspection benches the clear numerical accuracy offers a direct basis for process decisions and documentation. Built to withstand shopfloor demands Constructed from special steel, this gauge pin is specified for frequent handling and contact with various mating surfaces. The 50 mm length gives sufficient engagement for most end-measure tasks while remaining compact enough for quick positioning. The workshop execution emphasises mechanical robustness rather than delicate laboratory finishes, which helps to keep service intervals low and uptime high in machining and assembly environments. Practical use cases and handling benefits Designed as a single test pin, the component is suitable for hole checking, gauge stacks, locating operations and fixture alignment. The nominal 14.64 mm diameter matches end-measure reference sizes where precise fit and minimal play are required. Because the part is single, it integrates easily into existing gauge sets or bespoke test rigs and supports straightforward traceable measurements during first-article inspections or daily quality checks. Simple documentation and identification The item is supplied with identification data that eases stock-keeping and traceability: SKU M323.E64 and GTIN 4061905068775 simplify ordering and record-keeping. A measured mass of 0.1 kg and the combination of diameter and length make it straightforward to plan storage and handling on the calibration rack. Clear labelling and consistent material choice also support repeatable results in serial inspection tasks. Contact Metav Werkzeuge for a quotation or compatibility check on the Metav IndustryLine gauge pin M323.E64 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.E64 GTIN: 4061905068775 SKU: M323.E64 Facts Diameter: 14.64 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Single gauge pin for end-measure applications FAQ What applications suit this gauge pin best? The gauge pin is intended for end-measure checks, hole verification and locating tasks; the Metav IndustryLine gauge pin M323.E64 is therefore well suited to inspection benches and fixture set-up. How tight is the tolerance and what does it mean in practice? A tolerance of ±0.002 mm gives high repeatability for routine inspection; in practice the value indicates that the pin’s diameter deviates from nominal by no more than two micrometres. Is the gauge pin traceable for documentation? Yes, the item is supplied with clear identification (GTIN 4061905068775 and SKU M323.E64) to support traceability and inventory control. Can this pin be used directly in gauge sets and fixtures? The single-piece design and workshop-grade construction make it compatible with common gauge stacks and locating fixtures where a 14.64 mm diameter member is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.65mm Gauge Pin 50mm Length Workshop Version, Special Steel in Case - Metav IndustryLine
This gauge pin combines high repeatability with compact dimensions and robust workshop design — ideal for reliable end‑dimension checks in fine mechanical production. Benefit from ±0.002 mm tolerance and a 14.65 mm diameter finish for consistent fits. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.E65 Gauge Pin — 14.65 mm Diameter, 50 mm Length (Metav IndustryLine) A gauge pin M323.E65 designed for precise end‑measurement and alignment tasks in workshop and inspection environments Precise 14.65 mm diameter fit Tolerance ±0.002 mm for fine inspection 50 mm length in special steel workshop version Accurate end‑dimension control for micro components The supplied test pin delivers precision where small tolerances decide part acceptance. With a nominal diameter of 14.65 mm and an indicated accuracy of ±0.002 mm, the component serves as a reliable reference for end‑measurement and fit verification in small assemblies. Classified in the micro range (10–100 mm), this product is particularly suitable for fine mechanical work such as instrument components and small housings. The tight tolerance reduces scrap and rework by providing a stable datum for repeatable checks. Workshop‑proof construction that withstands daily use Machined from special steel, the pin is engineered for durability in workshop conditions while retaining the fine finish required for gauge applications. The 50 mm overall length offers a convenient handling length without compromising stiffness, making measurements and fit checks straightforward during assembly or inspection. The compact mass supports quick manipulation on the bench and can be used with common fixture plates and alignment tools. The workshop version emphasises practical longevity and simple integration into existing quality routines. Practical applications and efficiency gains on the shop floor Used as a reference pin for end‑measurement, alignment, and component seating, this test pin helps streamline quality control processes. The dimension stability and repeatable fit facilitate fast go/no‑go checks, setup verification and alignment of mating parts, contributing to shorter inspection cycles and fewer production interruptions. As a single‑piece test pin, it is effective for both standalone checks and as a reference in comparative gauges, promoting consistent assembly outcomes and greater confidence in final part quality. Discuss batch availability and specification matching with Metav Werkzeuge to ensure the M323.E65 meets application requirements and production cadence Technical data Article number: M323.E65 SKU: M323.E65 GTIN: 4061905066603 Brand: Metav IndustryLine Core figures Diameter: 14.65 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Design & features Material: special steel Version: workshop execution Category: gauge pin / test pin Intended use: end‑dimension checks and alignment FAQ What tolerance does the gauge pin offer? The M323.E65 gauge pin is specified with an accuracy of ±0.002 mm, suitable for fine inspection and tight‑fit verification. Which materials is the pin suited for checking? The test pin itself is made from special steel and is intended as a dimensional reference for components made of various workshop materials during fit and alignment checks. Is this gauge pin suitable for watchmaking or micro‑mechanics? Yes — classified in the micro range (10–100 mm), the pin is designed for small parts and precision assemblies where compact, stiff references are required. How is the pin delivered and identified? Each item is supplied with the listed article details (SKU M323.E65 and GTIN) for clear identification and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com