Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
14.18mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
The combination of workshop-grade construction, tight tolerance and a protective transport case ensures dependable end‑dimension checks and long service life; order the part directly via Metav Werkzeuge or consult our specialists for matching gauge sets. Gauge Pin M323.E18 – Single, Ø 14.18 mm, 50 mm Length (Metav IndustryLine) The Gauge Pin M323.E18 is a workshop-grade cylindrical reference pin intended for fast end‑dimension verification and fixture set‑up in production and inspection environments. Workshop-grade precision tool Diameter 14.18 mm, length 50 mm Tolerance ±0.002 mm Precision that makes quick checks decisive A compact reference that delivers predictable results: the 14.18 mm diameter and 50 mm length provide a stable contact geometry for bore and end‑dimension checks, while the stated ±0.002 mm tolerance reduces ambiguity during pass/fail decisions. This level of accuracy supports repeatable measurements on production lines and in quality control benches, enabling faster verification cycles and fewer rejects without changing existing inspection routines. Robust workshop design for reliable daily use Built as a workshop‑grade component from special steel, the pin balances hardness and wear resistance for frequently repeated engagement with gauges and fixtures. Delivered in a protective case, the single‑unit supply preserves the measuring face in transit and storage, keeping the reference surface free from nicks that could compromise results. The modest mass and compact form support straightforward handling and quick insertion into holders or test jigs. Integrates with inspection workflows to cut setup time As a single reference pin, M323.E18 fits into standard gauge stacks and fixture bores to simplify alignment and end‑dimension confirmation. Clear identification via GTIN and SKU facilitates inventory control and traceability for production records. Using a defined reference pin reduces iterative adjustments during set‑up, helping to lower downtime and improve throughput while maintaining documented repeatability in routine checks. For workshop applications seeking consistent end‑dimension control, contact Metav Werkzeuge in Emmerich for product matching, availability and assistance with gauge set configuration. Technical data Article number: M323.E18 GTIN: 4061905067853 SKU: M323.E18 Facts Diameter: 14.18 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Delivered in protective case Single gauge pin FAQ What applications is this gauge pin suitable for? The gauge pin is designed for end‑dimension verification, fixture set‑up and bore checks in workshops and inspection stations; the M323.E18 from Metav IndustryLine suits routine production and quality control tasks. Is the tolerance suitable for industrial use? Yes, the ±0.002 mm tolerance positions the pin for precise dimensional checks where reliable pass/fail assessment matters in a production environment. How is the item delivered and protected during storage? The product is supplied as a single unit in a protective case to preserve the measuring face and support secure transport and storage. Can this pin be used with standard gauge holders and fixtures? The pin’s nominal geometry and compact length make it compatible with common gauge holders and fixture bores; M323.E18 integrates easily into existing inspection jigs. How is the item identified for inventory and traceability? Identification is provided via SKU M323.E18 and GTIN 4061905067853, which supports warehouse management and traceability in inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.19mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of proven workshop robustness and pinpoint accuracy to speed up end‑dimension checks and reduce rework; the combination of a 14.19 mm working diameter and a ±0.002 mm tolerance ensures repeatable results in serial inspection. Order directly via Metav Werkzeuge or ask their consultants for application advice. Gauge pin M323.E19 — single 14.19 mm / 50 mm workshop inspection pin (Metav IndustryLine) A single gauge pin, the M323.E19, designed for precise end‑dimension checks and fixture setting in workshop and production environments. Workshop version for everyday use Precision diameter 14.19 mm ±0.002 50 mm overall length for fixture setting Made from special steel for enhanced durability Precision that streamlines inspection The M323.E19 delivers a tight tolerance of ±0.002 mm, making it suitable for routine verification of bore and pin fits where small deviations have real cost implications. By converting a measured clearance into a verifiable, numeric outcome, the inspection pin reduces subjective judgement, shortens check cycles and lowers the risk of downstream rework. The specified 14.19 mm nominal diameter and calibrated geometry work together to provide a reliable reference when setting gauges or confirming end‑dimensions on production parts. Built for workshop reliability and handling Manufactured in special steel, the pin is prepared for frequent handling and the mechanical demands of a busy workshop: consistent seating in bushings, resistance to wear and a compact 50 mm length that eases positioning in fixtures and jigs. The workshop specification means the component balances toughness with dimensional stability so that routine use does not rapidly degrade the reference fit. In practical terms, this translates to fewer replacements and steady results across inspection batches. Integration into measurement and setup workflows As a single inspection pin intended for end‑dimension and fixture tasks, this item supports quick changeovers and targeted checks during set‑up. Supplied individually, it is easy to store as a spare or to combine with an existing gauge tray for rapid access during tool changes. When established as part of a standardised setup, the pin reduces machine downtime and contributes to a predictable measurement routine. The compact form factor also aids ergonomic handling during repeated operations, keeping process throughput efficient. For a workshop‑grade inspection reference choose the Metav IndustryLine gauge pin M323.E19 — contact Metav Werkzeuge for tailored advice or to arrange supply. Technical data Article number: M323.E19 GTIN: 4061905067860 Category: Messstifte Facts Diameter: 14.19 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Eclass: 21170231 FAQ What is the exact diameter of this gauge pin? The gauge pin has a nominal diameter of 14.19 mm; the specification is indicated on the M323.E19 product label from Metav IndustryLine. How precise is the M323.E19 inspection pin? Precision is specified as ±0.002 mm, making the inspection pin suitable for tight end‑dimension checks in workshop and production settings. What material is used for the pin? The component is made from special steel, chosen for a balance of wear resistance and dimensional stability in workshop use. Is the pin supplied individually or in sets? This item is supplied individually as a single gauge pin, intended for selective replacement or integration into existing gauge sets. Which applications suit this inspection pin best? Typical uses include end‑dimension verification, fixture setting and short‑range plug checks where a compact 50 mm reference is required; the M323.E19 performs reliably in these tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.1mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
The combination of precise manufacture (±0.002 mm), special steel construction and a compact 50 mm length ensures repeatable end‑size checks and stable positioning in workshop jigs. Order the gauge pin directly via Metav Werkzeuge or consult our technical team for application advice. Gauge pin M323.E10 — 14.1 mm diameter, 50 mm length (Metav IndustryLine) A single gauge pin designed for end‑size verification, alignment and fixture set‑up in workshop and inspection environments Single hardened gauge pin 14.1 mm diameter 50 mm length for stable positioning Delivered in a protective transport case Repeatable end‑size checks for reliable production control Manufactured to a diameter of 14.1 mm with a manufacturing tolerance of ±0.002 mm, this single measuring pin delivers the dimensional certainty required for end‑size verification and alignment tasks. The compact 50 mm shank provides a short, stiff measuring element that reduces bending and runout, making it suitable for repetitive checks in assembly or inspection operations. The tolerance figure refers to the production deviation and supports clear pass/fail criteria when combined with gauge blocks or fixture references. Workshop robustness with straightforward handling benefits Made from special steel, the pin is built for frequent use in workshop conditions; the material selection balances hardness and toughness to resist wear while avoiding brittle failure. The hardened surface preserves the nominal diameter over many cycles, reducing the need for frequent replacements. Supplied as a single piece in a protective transport case, handling is simplified and damage during storage or transit is minimised, which helps maintain measurement integrity across the tool’s service life. Simple integration into inspection workflows and traceability The pin’s compact form factor and clear labelling (SKU M323.E10, GTIN 4061905066924) allow easy incorporation into inspection sets, fixture plates and control programmes. Traceability is supported through these identifiers, aiding inventory and quality records. For workshops seeking efficient measurement routines, the pin functions as a dependable reference for fixture checks, hole gauging and assembly alignment — reducing adjustment time and improving first‑pass yield. Contact Metav Werkzeuge for application guidance on Metav IndustryLine gauge pins and to arrange supply from our Emmerich stock. Technical Data Article number: M323.E10 GTIN: 4061905066924 Weight: 0.1 kg Material: Special steel Category: Measuring pins / Gauge pins Facts Diameter: 14.1 mm Length: 50 mm Manufacturing tolerance: ±0.002 mm Special features Workshop version Single piece delivery Supplied in a protective transport case FAQ What is the nominal diameter and tolerance of this gauge pin? The pin is manufactured to a nominal 14.1 mm diameter with a manufacturing tolerance of ±0.002 mm for consistent end‑size checks using M323.E10 gauge pins from Metav IndustryLine. Is the pin suitable for repeated use in a production environment? Yes; the special steel construction and hardened finish of the M323.E10 measuring pin are intended for frequent handling and maintain dimensional stability over many cycles. How is the product delivered and how does that help maintain accuracy? The gauge pin is supplied as a single piece in a protective transport case, which reduces the risk of transit damage and preserves the nominal diameter for accurate measurements. Can the pin be used for fixture alignment and hole gauging? The short, stiff 50 mm length and precise diameter make this measuring pin suitable for fixture alignment, hole gauging and repeatable positional checks in workshop and inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.21mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from workshop-grade robustness combined with ±0.002 mm repeatability and precisely machined Ø14.21 mm × 50 mm dimensions for reliable end‑measure checks; request the Metav IndustryLine gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.E21 — Metav IndustryLine workshop inspection pin, Ø14.21 mm, 50 mm length The gauge pin M323.E21 is a single, precision‑ground inspection pin intended for end‑measure verification and reference fits in workshop and production environments. Precision ground to ±0.002 mm Diameter 14.21 mm, length 50 mm Made from special steel for durability Workshop design, robust finish Reliable reference for dimensional control A consistently accurate reference reduces rework and speeds up quality checks. The gauge pin is precision ground to ±0.002 mm, delivering a stable nominal diameter that serves as an exacting go‑no‑go reference for plug fits, bore checks and gauge fixtures. Its defined geometry simplifies comparative measurements and helps maintain tight tolerances on finishing and assembly operations. Where repeatability matters, this inspection pin provides a compact and traceable means to verify end‑measures without the complexity of larger calibration artefacts. Built to withstand workshop handling Robustness is essential for daily use at the bench or in a production cell. Manufactured from Special steel, the inspection pin resists wear from repeated seating and handling while retaining its finish and dimensional integrity. The workshop execution is adapted to practical use: the 50 mm length gives enough engagement for stable checks without unnecessary overhang, and the smooth surface reduces the risk of scoring mating bores. This combination of material and design supports dependable, long‑term use under typical workshop conditions. Practical integration into quality routines Traceability and compatibility with established workflows make the inspection pin straightforward to deploy. Supplied as a single unit and carrying the SKU M323.E21, the pin can be used as a master for end‑measure checks, a reference in inspection jigs or as a verification tool during setup operations. For specific integration advice or to confirm suitability for a particular fixture geometry, Metav’s technical team in Emmerich can provide guidance by e‑mail or phone; their role as a precision partner supports consistent supply and advice for industry and trade. Choose the Metav IndustryLine gauge pin for dependable end‑measure checks — contact Metav Werkzeuge in Emmerich for expert application advice and prompt supply Technical data Article number: M323.E21 GTIN: 4061905068850 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 14,21 mm Länge 50 mm Facts Diameter: 14.21 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Delivery: single piece SKU: M323.E21 FAQ What tolerance does the gauge pin provide? The gauge pin M323.E21 is precision ground to a tolerance of ±0.002 mm, suitable for tight end‑measure comparisons and reference tasks. Which material is used for the inspection pin? The inspection pin is manufactured from special steel to ensure wear resistance and dimensional stability under repeated use. Is the pin supplied as a single item or in sets? This item is supplied as a single gauge pin (Prüfstift, einzeln) under SKU M323.E21. Can the pin serve as a master for plug and bore checks? Yes, the pin’s defined diameter and tight tolerance make it suitable as a master reference for plug and bore verification in workshop and production settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.22mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a workshop-grade inspection pin that combines ±0.002 mm repeatability, robust special steel construction and a compact 50 mm length for dependable end‑measurement checks. The result: reliable pass/fail control and consistent dimensional verification across production runs. Order directly via Metav Werkzeuge or consult the team for application advice. Gauge Pin M323.E22 — 14.22 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.E22 designed for precise end‑measurement checks and routine hole verification in workshop and inspection environments Workshop-grade design, robust construction Diameter 14.22 mm, length 50 mm Accuracy ±0.002 mm for tight tolerances Supplied in protective transport case Precision that fits routine inspection This inspection pin delivers high repeatability for short, frequent checks where stable reference dimensions matter. With a nominal diameter of 14.22 mm and an overall 50 mm length, the component is optimised for end‑measurement tasks and quick Go/No‑Go probing in fixtures and jigs. The specified ±0.002 mm variation denotes a tight manufacturing tolerance that reduces uncertainty in pass/fail decisions; this translates into fewer rework loops and more consistent quality on the shop floor. The special steel composition maintains dimensional stability under normal handling and reduces wear compared with untreated alternatives. Durable handling and straightforward storage Engineered as a workshop version, the pin offers practical resistance to knocks and routine handling typical of production areas. The compact weight and length make the item easy to seat in inspection setups and to manipulate with standard holders or magnetic fixtures. Delivery in a protective transport case preserves the calibrated surface during storage and transit and simplifies organisation of inspection sets. The combination of robust material and sensible packaging reduces downtime caused by damaged gauges and helps maintain an orderly inspection station. Integrating fast checks into quality workflows Designed for efficient insertion into existing inspection routines, the pin supports quick dimensional verification without complex adjustment. As a hardened gauge element, it is suitable for repeated contact with mating parts and jigs, speeding up batch checks and first-article inspections. The clear nominal size and tight tolerance make the pin ideal for use where end‑measurements are decisive in acceptance criteria. For traceable procurement and stock management, the item is sold under SKU M323.E22 and is identified by GTIN for logistics and inventory systems. Metav’s workshop focus ensures compatibility with everyday industrial workflows and reduces the barrier to deploying precise measurement tools at scale. Contact Metav Werkzeuge for advice on fitting the M323.E22 into existing inspection fixtures or to arrange prompt delivery from Emmerich—their specialists help match the pin to specific end‑measurement tasks and stocking options Technical Data Article number: M323.E22 GTIN: 4061905068867 Label: Prüfstift, einzeln, 14,22 mm Länge 50 mm Brand: Metav IndustryLine Facts Diameter: 14.22 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Measurement range: 14.22 mm Special features Workshop version Material: special steel Supplied in protective transport case Intended for end‑measurement checks Category: Gauge pins FAQ What tolerance can be expected from this gauge pin? The M323.E22 gauge pin from Metav IndustryLine is manufactured to a tolerance of ±0.002 mm, making it suitable for tight dimensional checks. Can this pin be used directly in fixtures and jigs? Yes, the workshop‑grade design allows the pin to be seated in standard holders and fixtures for routine Go/No‑Go and end‑measurement verification. Is the pin delivered ready for inspection use? The gauge pin is supplied in a protective transport case; any calibration certificates included will be noted in the product listing or on request. What material is the pin made from and why does that matter? The pin is made from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions. How is the item identified for ordering and stock control? Order and inventory references are the SKU M323.E22 and the GTIN 4061905068867, which simplify procurement and logistics. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.23mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Compact and workshop‑ready, this single gauge pin offers a nominal diameter of 14.23 mm, a rigid 50 mm length and a declared accuracy of ±0.002 mm, enabling dependable end‑size checks and repeatable plug‑gauging operations. Order this inspection pin directly via Metav Werkzeuge or consult the team for specification guidance. Gauge pin, single, 14.23 mm, length 50 mm — Metav IndustryLine workshop inspection pin, tolerance ±0.002 mm The Gauge pin, single, 14.23 mm, length 50 mm is a workshop‑grade inspection pin designed for precise end‑size verification and plug‑gauging tasks in production and quality control environments. Workshop‑grade construction Diameter 14.23 mm nominal size Length 50 mm for compact fixtures Tolerance ±0.002 mm Consistent end‑size control for repeatable checks The precise nominal diameter of 14.23 mm combined with a declared tolerance of ±0.002 mm ensures consistent size verification across repeated measurements. Such a narrow tolerance reduces uncertainty when comparing parts to a reference dimension, which helps to avoid unnecessary rework and to maintain interchangeability across mating components. The product’s compact form supports quick manual gauging and simple incorporation into existing inspection routines. Durable, compact design for workshop handling Manufactured from special steel, the pin delivers the strength required for regular workshop use while remaining compact at 50 mm overall length and about 0.1 kg in mass. This combination of material and dimensions makes the item easy to position in jigs and fixtures and resilient against routine handling. The workshop version designation denotes attention to practical demands such as durability and straightforward replacement when wear occurs. Simple integration into inspection workflows Supplied as a single inspection pin (SKU M323.E23), the component is intended for selective replacement and targeted gauging applications rather than bulk gauge sets. The single‑piece format supports focused end‑size checks, where one accurate reference pin is preferable to larger kits. Traceable identification by SKU and GTIN allows straightforward inventory control and process documentation in production environments. Choose the Metav IndustryLine gauge pin for precise end‑size control and contact Metav Werkzeuge in Emmerich for ordering or detailed specification support by email or phone (+49 2822 7131930, info@metav-werkzeuge.com) Technical data Article number: M323.E23 GTIN: 4061905068874 Manufacturer: Metav IndustryLine Core data Diameter (nominal): 14.23 mm Length: 50 mm Weight: 0.1 kg Declared accuracy: ±0.002 mm Special features Workshop version Single item delivery Material: Special steel Purpose: End‑size checks / plug‑gauging FAQ What nominal diameter does the inspection pin have? The inspection pin has a nominal diameter of 14.23 mm as specified for the Metav IndustryLine gauge pin (SKU M323.E23). What accuracy can be expected from this gauge pin? A declared tolerance of ±0.002 mm is given for the component, which supports precise end‑size verification and repeatable measurements. Which material is used for the pin? The pin is made from special steel, selected for mechanical strength and suitability for regular workshop use. How is the item supplied? The product is supplied as a single gauge pin (single item), intended for focused replacement or individual gauging tasks. Is this pin suitable for use in jigs and fixtures? Yes; the compact 50 mm length and robust material make it well suited for integration into small‑scale jigs and fixture set‑ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.24mm Test Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of precise end-size control, robust workshop durability and simple inspection integration to keep production checks efficient and reproducible; order the gauge pin directly via Metav Werkzeuge or request further technical advice from our consultants. Gauge pin M323.E24 — single 14.24 mm, length 50 mm (Metav IndustryLine) A single gauge pin designed for end-size inspection and workshop use, offering high repeatability in compact dimensions. 14.24 mm diameter for end-size checks Tolerance ±0.002 mm for repeatable results Workshop-grade special steel, 50 mm length Precise end-size control to speed up inspection The compact pin is optimised for end-size verification where small dimensional deviations matter. With a nominal diameter of 14.24 mm and a manufacturing deviation of ±0.002 mm, the pin provides a measurable basis for consistent pass/fail decisions on mating parts and assemblies. The tight tolerance reduces rework and rejects, improving overall throughput in inspection routines; the result is a demonstrable saving in operator time and fewer stoppages caused by uncertainty at final checks. Robust workshop design that tolerates daily handling Built as a workshop version, the test pin combines a hardened surface finish with a special steel core for wear resistance during repeated seating and extraction. The 50 mm length offers convenient handling while keeping bending moments low; the individual pin weighs approximately 0.10 kg, making it easy to position without disturbing delicate setups. For transport and protection between uses, the pin is supplied in a protective transport box, ensuring the reference surface remains free from nicks and contamination that would impair accuracy. Simple integration into existing inspection routines The pin is intended for straightforward incorporation into go/no-go checks, fixture masters and end-of-line verification. Its compact form factor reduces cycle time for manual measurements and supports rapid visual confirmation when paired with datum fixtures or plug gauges. For traceability, the item is listed under SKU M323.E24 and the GTIN is available for inventory systems; this facilitates stock management and ensures consistent replacement of worn gauges. The combination of precise geometry and a workshop-oriented design promotes reliable, repeatable inspection results across production shifts. For assured workshop precision, order the Metav IndustryLine gauge pin via Metav Werkzeuge and rely on our team in Emmerich for any technical clarifications and delivery coordination Technical data SKU: M323.E24 GTIN: 4061905068881 Label: Gauge pin, single, 14.24 mm, length 50 mm Core specifications Diameter: 14.24 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Workshop version Supplied in a transport box Application: end-size inspection FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, providing reproducible results suitable for end-size verification with high repeatability. Is the pin suitable for routine workshop checks and transport? Yes. The Metav IndustryLine gauge pin M323.E24 is a workshop-grade test pin supplied in a protective transport box to preserve the reference surface during handling and storage. Can this pin be used as a reference for fixture masters? The pin’s precise diameter and short length make it well suited for inclusion in fixture masters and go/no-go assemblies where compact, repeatable gauging is required. How is the product identified for inventory and traceability? The item is listed under SKU M323.E24 and GTIN 4061905068881, which supports stock control and straightforward replacement in inspection systems. What typical applications suit this gauge pin? Typical uses include end-size checks on shafts and bores, quick go/no-go validation in assembly lines and use as a reference in fixture setups. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.25mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact, workshop-grade inspection pin that combines 14.25 mm diameter, ±0.002 mm accuracy and a 50 mm length for reliable end‑size checks; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single — Ø 14.25 mm, 50 mm length (Metav IndustryLine) Gauge pin, single, 14.25 mm diameter and 50 mm overall length, intended for precise end‑size inspection and alignment tasks in workshop environments Workshop version for robust use Diameter 14.25 mm with ±0.002 mm tolerance 50 mm overall length, special steel construction Supplied in a transport case for safe handling Consistent measurement quality for end‑size control The inspection pin is engineered for end‑size verification and alignment tasks where reproducible dimensions are required. Its nominal diameter of 14.25 mm and a declared accuracy of ±0.002 mm make it suitable for fine metrology checks and gauging fixtures in machine shops. The specified tolerance communicates a clear, measurable limit for acceptance criteria and supports efficient quality control routines; traceable reference data such as GTIN and SKU facilitate inventory and process documentation. Durable construction and straightforward handling Manufactured from special steel, this single gauge pin is finished for durable workshop use and resists routine handling and light surface wear. The 50 mm length provides enough engagement for stable seating in bores and test fixtures while keeping mass low for simple manipulation. Delivery in a dedicated transport case reduces the risk of damage in storage and transit and supports immediate deployment at the bench or in an inspection jig. The workshop specification emphasises practical service life over delicate laboratory finishes. Application fit and efficiency in production workflows As a compact inspection element, the pin is well suited for end‑of‑line checks, fixture set‑up and quick go/no‑go verifications on series parts. Its compact geometry speeds measurement routines and simplifies integration into existing gauge assemblies. With clear, measurable performance figures, the component supports rational decision‑making in process control: fewer measurement cycles, faster set‑ups and more predictable tolerance adherence translate into reduced rework and higher throughput. Contact Metav Werkzeuge for a tailored quote or to arrange priority dispatch of the M323.E25 gauge pin and its workshop kit Technical data Article number: M323.E25 GTIN: 4061905068898 SKU: M323.E25 Facts Diameter: 14.25 mm Overall length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Version: workshop execution Packaging: supplied in transport case Category: gauge pins (Messstifte) FAQ What is the nominal diameter and tolerance of this gauge pin? The gauge pin has a nominal diameter of 14.25 mm with a declared tolerance of ±0.002 mm for precise end‑size verification. Is the pin suitable for workshop use and transport? Yes, the Metav IndustryLine workshop version is made from special steel and is supplied in a transport case to protect the pin during handling and storage. Which SKU identifies this item for ordering and documentation? The inspection pin is listed under SKU M323.E25 and GTIN 4061905068898 for procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.26mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of a compact, workshop‑rated measuring solution that combines high repeatability and robust construction for consistent end‑dimension checks; the 14.26 mm diameter and ±0.002 mm tolerance ensure reliable fitting and quick go/no‑go decisions. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for application support. Gauge pin, single — 14.26 mm Ø, 50 mm length (Metav IndustryLine) Gauge pin, single — 14.26 mm Ø, 50 mm length (Metav IndustryLine) is a precision workshop pin for end‑measure and fit verification in component inspection and jig setup. Workshop version for robust handling Diameter 14.26 mm with ±0.002 mm accuracy 50 mm length for end‑measure and fitting Made from special steel for wear resistance Accuracy that speeds up inspection cycles The compact design delivers repeatable results where tight tolerances matter. With a nominal diameter of 14.26 mm and an accuracy of ±0.002 mm, this inspection pin reduces uncertainty in trial fits and fixture checks. The pin’s short, stiff geometry minimises bending under manual handling, making measurements fast and dependable; this saves time during set‑up and avoids iterative reworking. The precision rating is particularly suited to micro‑component checks within workshops and small assembly cells. Built for workshop use and long service life A workshop version implies components and finishes chosen for durability rather than fragile laboratory handling. The pin is manufactured from special steel, providing enhanced wear resistance during repeated ingress/egress operations in locating holes and gauges. The construction supports frequent handling on the shop floor and helps maintain tolerance over long production runs, lowering the frequency of replacements and interruptions to production. Practical dimensions for everyday metrology tasks At 50 mm length, the pin offers sufficient reach for end‑dimension checks without sacrificing rigidity, making it a practical tool for benchwork, jig validation and fast fit testing. The format is classified in the micro range of caliper‑type inspection aids, where compactness and stiffness deliver the best compromise between handling and measuring capability. Its balanced geometry reduces play in locating situations and speeds up go/no‑go decisions in routine quality control. How it integrates into inspection workflows The simple cylindrical form factor means the pin is easy to locate, pair with gauge blocks or fit into fixture bores, and include in comparative measurement rigs. Being a single, calibrated pin for end‑measure tasks, it supports checks for concentricity and clearance when used as a master diameter. The robust finishing and material choice ensure the pin performs consistently as a reference in assembly checks and trial mating operations. Choose the Metav IndustryLine gauge pin for dependable ±0.002 mm verification — contact Metav Werkzeuge for procurement and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.E26 GTIN: 4061905068904 Brand: Metav IndustryLine Facts Nominal diameter: 14.26 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Version: workshop execution Application: end‑measure and fit verification FAQ What tolerances can be expected from this gauge pin? The gauge pin delivers a tolerance of ±0.002 mm; the 14.26 mm diameter is held to this specified accuracy for reliable fit and inspection. Is this pin suitable for workshop use or only for lab inspection? This Metav IndustryLine workshop version is designed for shop‑floor durability while maintaining precision, making it ideal for routine assembly and inspection tasks. Can the pin be used as a reference for fixture set‑up? Yes, the 50 mm length and precise diameter make the pin suitable as a master for fixture validation and end‑dimension checks during set‑up. Which material is the gauge pin made from and why does it matter? The pin is made from special steel, chosen to resist wear during repeated insertion and removal, thereby preserving dimensional reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.27mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the ±0.002 mm manufacturing tolerance and robust special steel construction to ensure repeatable end‑dimension checks and reliable workshop handling; order the gauge pin directly via Metav Werkzeuge or contact our consultants for technical advice. Gauge pin, single, 14.27 mm Ø · 50 mm length (Metav IndustryLine) A gauge pin M323.E27 designed for precise end‑dimension verification and alignment tasks in workshop metrology. High-precision tolerance ±0.002 mm Hardened special-steel construction 50 mm useful length for end checks Workshop version for robust handling Precise measurement that reduces inspection uncertainty The single pin is manufactured to a tight ±0.002 mm tolerance, offering a measurable improvement in reproducibility compared with common bench probes. As a solid cylindrical gauge it is ideal for plain end‑dimension checks and locating bores during setup—this direct mechanical reference reduces the need for time‑consuming adjustments and supports faster throughput in production and inspection routines. The controlled tolerance is especially beneficial where repeatability influences downstream assembly quality. Robust material and form for everyday workshop use Constructed from special steel, the pin resists wear during repeated seating and withdrawal, sustaining the functional diameter over many cycles. The 50 mm length provides a stable engagement depth for most end‑dimension tasks while remaining easy to handle and store. The workshop specification balances toughness and machinability: suitable for alignment, go/no‑go checks and as a locating aid in jigs without requiring delicate handling or specialised fixtures. Practical benefits and inspection considerations Using a standard single gauge pin simplifies routine verifications and short run changeovers by providing a quick, unambiguous reference. The nominal diameter 14.27 mm aligns with fine tolerance fits and can be used alongside plug gauges or master pins during comparative checks. For formal traceability or laboratory reference use, request the specific calibration option or certificate that meets internal quality procedures; otherwise the pin serves as a dependable workshop standard that streamlines daily measurement tasks. For reliable end‑dimension checks with Metav IndustryLine quality, contact Metav Werkzeuge to request availability of the M323.E27 gauge pin or to discuss calibration and batch supply options. Technical data Article number: M323.E27 GTIN: 4061905068911 Brand: Metav IndustryLine Dimensions & accuracy Diameter: 14.27 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Version: Workshop execution Type: Single gauge pin Application: End‑dimension checks and alignment FAQ What are the exact dimensions of the gauge pin? The gauge pin M323.E27 has a nominal diameter of 14.27 mm and an overall length of 50 mm. What tolerance does the pin offer for inspection work? This single gauge pin is manufactured to a tolerance of ±0.002 mm, suitable for precise workshop verifications. Is the pin suitable for alignment and locating tasks? Yes, the robust form and 50 mm engagement length make the M323.E27 well suited to alignment, locating and simple go/no‑go seating checks. Can this pin be used as a calibrated reference standard? The M323.E27 functions as a dependable workshop reference; for formal traceability, request a calibration certificate or calibration service to meet specific quality system requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.28mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of precise diameter control (14.28 mm), high dimensional accuracy (±0.002 mm) and robust special steel to standardise end‑dimension checks in production and inspection. Order the pin directly via Metav Werkzeuge or consult our specialists for integration advice. Gage pin, single, 14.28 mm, length 50 mm — workshop reference pin with ±0.002 mm accuracy The Gage pin, single, 14.28 mm, length 50 mm is a compact inspection pin designed for repeatable end‑dimension verification, fixture setup and reference checks in workshop and shop‑floor metrology. Precision diameter 14.28 mm ±0.002 mm Length 50 mm for end‑dimension checks Made from special steel for robustness Delivered in a transport case Reproducible end‑dimension checks for quality control A purpose‑made gage pin with a defined diameter of 14.28 mm and an accuracy of ±0.002 mm provides a stable reference when verifying component end faces or mating bores. The tight tolerance reduces measurement uncertainty and shortens inspection loops, which helps to lower scrap rates and speeds up pass/fail decisions. Used as a master reference in routine checks or as a plug gauge substitute, this pin supports a consistent inspection workflow and improves overall process reliability. Dimensional stability and workshop suitability Manufactured from special steel, the pin combines wear resistance with dimensional stability under typical workshop conditions. The 50 mm length gives sufficient engagement for end‑face and short‑bore verifications while remaining easy to handle. The workshop execution ensures the component withstands everyday mechanical demands; its mass and surface finish contribute to repeatable seating in fixtures and gauges. A compact reference of this kind is particularly useful where space is limited but traceable precision is required. Practical handling, storage and integration in inspection routines The pin is supplied ready for use and stored safely in a transport case, which protects the calibrated diameter and surface during handling and transport. Lightweight and simple to incorporate, the reference pin suits hand inspection, fixture alignment and gauge setting tasks without adding complexity to the measurement procedure. For workshops seeking to centralise precision tools, this single‑piece reference integrates directly into go/no‑go checks and short‑run quality procedures, offering a pragmatic balance between robustness and metrological performance. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gage pin M323.E28 can be integrated into your inspection process or to request ordering guidance Technical data Article number: M323.E28 GTIN: 4061905069680 Label: Gage pin, single, 14.28 mm, length 50 mm Facts Diameter: 14.28 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Delivery: transport case included Suitable for end‑dimension and fixture checks FAQ What is the nominal diameter and tolerance of this gage pin? The gage pin has a nominal diameter of 14.28 mm with an indicated tolerance of ±0.002 mm for high‑precision reference measurements. Can the gage pin be used for fixture alignment and gauge setting? Yes; the M323.E28 gage pin is designed as a compact inspection reference suitable for fixture alignment, short‑bore checks and gauge setting on the shop floor. What material is the pin made from and why does it matter? The inspection pin is made from special steel, which provides wear resistance and dimensional stability important for repeatable seating and long‑term accuracy. Is the pin supplied ready for safe storage and transport? The pin is supplied in a protective transport case to maintain the integrity of the calibrated diameter and to prevent damage during handling. How does this reference pin support routine quality control? By offering a defined diameter and tight tolerance, the reference pin standardises end‑dimension checks, shortens inspection cycles and improves repeatability in routine quality processes. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.29mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of consistent measurement accuracy ±0.002 mm, a robust special‑steel construction, and a compact 50 mm length for reliable end‑measure checks; order the pin gauge directly via Metav Werkzeuge or consult our advisors for application support. Pin gauge M323.E29 — single gauge pin, Ø 14.29 mm, length 50 mm (Metav IndustryLine) The Pin gauge M323.E29 is a single, hardened gauge pin designed for precise end‑measure verification and reference sizing in workshop inspection and tool‑setting applications. Workshop design, robust execution Diameter 14.29 mm, tight tolerance Length 50 mm for end‑measure checks Accuracy ±0.002 mm for fine control Reduce rework with measurable precision A compact pin gauge with a nominal diameter of 14.29 mm and an accuracy of ±0.002 mm provides a clear, measurable reference for inspection points and final‑size verification. The close tolerance reduces uncertainty during acceptance checks and tool adjustments, which in turn lowers the likelihood of rework and scrap. When used as a reference for bore checks or reamer validation, the tight accuracy supports repeatable decisions and faster process stabilisation, helping production keep to scheduled cycle times. Built for everyday workshop use Constructed from special steel, this single‑piece gauge is optimised for frequent handling and quick checks at the bench or machine. The 50 mm length gives sufficient engagement for end‑measure applications while maintaining ergonomic handling and minimal bending moment during use. The workshop execution ensures the gauge resists the knocks and slips common in daily shop routines, so the tool remains dependable as a go‑to reference during set‑ups and final inspections. Simple integration into inspection workflows Lightweight at approximately 0.1 kg, the gauge is easy to index and combine with existing master sets or fixture checks. The clear identification via SKU and GTIN supports inventory control and traceability in quality systems, speeding up audits and order replenishment. As a single gauge pin it is particularly useful for quick go/no‑go verifications and as a calibration benchmark in assembly or inspection stations, contributing to a structured quality approach across the workshop. Select the Metav IndustryLine pin gauge for dependable end‑measure control and contact Metav Werkzeuge for tailored advice or ordering at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.E29 GTIN: 4061905069697 Label: Pin gauge, single, 14.29 mm, length 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 14.29 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Features and materials Material: special steel Workshop design (robust execution) Single gauge pin for end‑measure checks Intended use: end‑measure and reference sizing FAQ What is the nominal diameter of this gauge? The gauge has a nominal diameter of 14.29 mm and is supplied as a single pin for precise reference checks. How accurate is the gauge for inspection work? Accuracy is specified as ±0.002 mm, making it suitable for fine control and repeatable end‑measure verifications. What material is used for this pin gauge? The pin is made from special steel, chosen for durability in everyday workshop conditions. Can this pin gauge be used for tool setting and reamer checks? Yes, the single gauge pin is suited to tool setting, reamer validation and quick go/no‑go bore checks. Is the product traceable for quality systems? Yes, the item is identifiable by article number M323.E29 and GTIN 4061905069697 for inventory and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.2mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, ±0.002 Accuracy, Supplied in Case - Metav IndustryLine
Combine the ±0.002 mm manufacturing tolerance with a special steel construction and compact 50 mm length for dependable end‑measurement checks; order the pin gauge directly via Metav Werkzeuge or consult our advisors for application support. Pin gauge, single — 14.2 mm Ø, 50 mm length (Metav IndustryLine) Pin gauge, single, 14.2 mm for precise end measurements and workshop inspection tasks, delivering repeatable diameter checks in a compact, robust format Workshop-grade construction Diameter 14.2 mm for end measurements Tolerance ±0.002 mm Consistent accuracy for routine inspection tasks A compact inspection pin designed for repeatable end‑measurement checks, the pin gauge provides a clear, measurable reference for production and quality control. The ±0.002 mm manufacturing tolerance ensures that diameter checks remain reliable across repeated use, reducing uncertainty at the inspection stage. Constructed from special steel, the tool resists wear in regular workshop environments, which preserves measurement integrity and minimises the need for frequent replacement. This combination of material and tolerance supports faster decision making during batch inspections and shortens machine downtime. Built for workshop durability and easy handling The workshop specification focuses on practical durability and straightforward handling: a 50 mm shank length gives enough engagement for stable measurements without excess bulk, while the modest mass (approx. 0.1 kg) keeps manipulation simple. Supplied in a protective case for safe transport, the gauge is ready for transfer between bench, machine or inspection jig without risk of damage. The compact format and robust finish make this an efficient choice for repetitive diameter verification and quick go/no‑go comparisons in production environments. Integrates smoothly into inspection routines and tooling sets Designed as a single reference pin for end measurements, the gauge fits into established inspection workflows and bench setups. Its clear, metric specification (14.2 mm) simplifies documentation and traceability within quality records and drawing references. As a purpose‑made measuring element it supports interchangeability in fixtures and can be used alongside other workshop gauges to build a reliable master set. The concise geometry reduces operator handling time and helps maintain consistent measurement force, which in turn improves repeatability of results across shifts. Choose Metav IndustryLine for dependable workshop gauges — contact Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com) to request SKU M323.E20 and confirm suitability for specific inspection routines Technical Data Article number: M323.E20 GTIN: 4061905067877 Product: Pin gauge, single, 14.2 mm Ø, 50 mm length Facts Diameter: 14.2 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution for regular use Supplied in a protective case for transport Single, standalone pin for end measurements FAQ What is the declared accuracy of this pin gauge? The Metav IndustryLine pin gauge (SKU M323.E20) is manufactured to a tolerance of ±0.002 mm, suitable for reliable workshop end‑measurement checks. What material is the gauge made from? The gauge is made from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions. Is the pin gauge supplied ready for transport? Yes, the gauge is supplied in a protective case for safe transport between bench and inspection areas. What applications is this pin gauge intended for? It is intended for end measurements, diameter verification and as a reference pin for production and quality control in workshop environments. Which identifier should be quoted when ordering? Please quote SKU M323.E20 or GTIN 4061905067877 when enquiring or ordering this Metav IndustryLine pin gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.31mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Taking advantage of the combination of ±0.002 mm tolerance, special steel construction and a compact 50 mm length, this inspection pin provides reliable dimensional verification for workshop and production use; order via Metav Werkzeuge or consult the technical team for application advice. Gauge pin M323.E31 — inspection pin, Ø 14.31 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.E31 is a precision inspection pin designed for consistent end‑measure checks and assembly validation in workshop and metrology environments. Precision tolerance ±0.002 mm Diameter 14.31 mm, length 50 mm Special steel for improved wear resistance Workshop-grade construction Reliable dimensional control for repetitive checks This inspection pin delivers repeatable accuracy thanks to a verified tolerance of ±0.002 mm, which positions it in the precision range required for machining and quality control tasks. The compact 50 mm length and fixed 14.31 mm diameter make the component particularly suitable for end‑measure checks, go/no‑go trials during assembly and quick verification of drilled or bored features. The numerical tolerance describes the permissible deviation in measurement; a tolerance of ±0.002 mm indicates that deviations are held to the micrometre level, reducing rework and improving process stability. Robust material and workshop design for daily use Manufactured from special steel, the pin is configured for routine use in a workshop setting where resistance to abrasion and dimensional stability are required. The material selection supports longevity under repeated contact and insertion cycles, which means fewer replacements and lower tool‑management overhead. The workshop execution emphasises practical handling and durability, allowing the item to be integrated into inspection benches or used as a lightweight checking tool during set‑up and maintenance tasks. Practical details that support quality workflows With a listed mass of 0.1 kg and a standardised geometry, the inspection pin is easy to handle and store while offering a stable reference for measurement operations. The compact form factor supports use in confined spaces and on fixtures where access is limited, ensuring that checks can be performed without complex rearrangement. Identifiable labelling and SKU facilitate traceability within stock systems and simplify reordering for production lines that require consistent dimensional standards. Integration into metrology and production processes As a metrology accessory, the pin functions as a simple, reliable tool for quick verification steps that complement more elaborate measuring instruments. Its role is to provide a fast, objective check of bore sizes, alignment and component fit during assembly or incoming inspection. When combined with calibrated measurement systems and documented quality checks, the inspection pin aids in maintaining process capability and reduces the likelihood of downstream defects. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for application guidance and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.E31 GTIN: 4061905069710 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 14,31 mm Länge 50 mm Facts Diameter: 14.31 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials / Special features Material: Special steel Workshop execution Single inspection pin Category: Gauge pins (Messstifte) FAQ What accuracy can be expected from this inspection pin? The inspection pin M323.E31 (Metav IndustryLine gauge pin, SKU M323.E31) is specified with a tolerance of ±0.002 mm, providing micrometre‑level repeatability for routine dimensional checks. Is the material suitable for frequent insertion and withdrawal? Yes, the component is made of special steel and produced in a workshop design intended for repetitive use, so it resists wear in standard checking and assembly cycles. Can this pin be used for bore verification in assemblies? The gauge pin is intended for end‑measure and bore checks; the fixed 14.31 mm diameter and robust construction make it suitable for quick go/no‑go style verification during assembly work. How is the item identified for stock and traceability? The product is supplied as SKU M323.E31 with GTIN 4061905069710, which supports inventory tracking and straightforward reordering within procurement systems. Which applications match the geometry and length of this pin? With a 50 mm length and compact form, the pin suits confined inspection tasks, alignment checks and small‑part assembly verification where a short, accurate reference probe is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.32mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of 14.32 mm diameter, 50 mm overall length and a tight tolerance of ±0.002 mm for dependable end‑dimension checks; order the measuring pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.E32 — measuring pin, Ø 14.32 mm, length 50 mm (Metav IndustryLine) The Test pin M323.E32 is a workshop‑grade measuring pin designed for fast end‑dimension verification and go/no‑go checks in production and inspection environments. Workshop-grade design for daily use Diameter 14.32 mm for precise end measurements 50 mm overall length for compact checking Dimensional tolerance ±0.002 mm for accuracy Made from special steel for wear resistance Accuracy that secures process decisions The inspection pin offers ±0.002 mm dimensional clarity, which supports reproducible pass/fail decisions on turned shafts and jig fixtures. With a defined 14.32 mm diameter and a compact 50 mm length, the component reduces uncertainty in short‑reach checks and aids quality control routines. The stated tolerance is a verifiable, measurable attribute that shortens inspection loops and lowers the risk of rework by providing a stable reference size that integrates easily into existing gauge setups. Built for the workshop — durable and serviceable Manufactured in special steel, the pin is optimised for repetitive handling and contact checks typical on the shop floor. The workshop‑grade finish balances corrosion resistance with the need for straightforward maintenance; occasional cleaning and light lubrication preserve contact geometry and measurement integrity. The single‑piece construction simplifies storage and use, while the solid material choice ensures longevity where abrasive debris or handling might shorten the life of softer measuring aids. Practical compatibility with inspection workflows As a dedicated measuring pin, this component complements fixture gauges, plug gauges and optical checks by providing a compact, repeatable datum for end‑dimensions. The compact geometry makes it suitable for confined inspection stations and integration into modular test rigs. Where a fixed reference is required for comparative measurements or quick go/no‑go assessments, the inspection pin supports a faster throughput and reduces the need for complex tooling changes during routine quality checks. Contact Metav Werkzeuge today to discuss application suitability for the Metav IndustryLine test pin M323.E32 and to arrange procurement or technical guidance from our emmerich‑based team. Technical Data SKU: M323.E32 GTIN: 4061905069727 Manufacturer: Metav IndustryLine Core specifications Diameter: 14.32 mm Overall length: 50 mm Dimensional accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop‑grade execution Category: Measuring pins Single unit supply FAQ What is the intended use for this measuring pin? This measuring pin is intended for end‑dimension checks and quick go/no‑go verification in workshop and inspection settings using the Metav IndustryLine test pin M323.E32. Is the diameter and tolerance suitable for precision assembly control? Yes, the 14.32 mm diameter and ±0.002 mm tolerance make the pin suitable as a repeatable reference in assembly and quality control processes. What material is the pin made from and how does it affect durability? The pin is made from special steel; this provides improved wear resistance for regular workshop use and supports consistent measurement results over time. Can the test pin be used with existing gauge blocks or fixtures? The measuring pin is compatible with standard fixture and gauge setups for comparative checks, plug‑gauging and fixture verification. Is this product supplied as a single unit or in sets? The product is supplied as a single measuring pin under SKU M323.E32 and is intended for single‑piece use in inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.33mm Gauge Pin 50mm Length Workshop Version Special Steel ±0.002 - Metav IndustryLine
Take advantage of the combination of high repeatability (±0.002 mm), robust special-steel construction and compact geometry for reliable end‑dimension checks in workshop environments — order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Prüfstift, einzeln, 14,33 mm Länge 50 mm — workshop-grade gauge pin with 14.33 mm nominal diameter and 50 mm length Prüfstift, einzeln, 14,33 mm Länge 50 mm is a single gauge pin designed for fast, reproducible verification of end dimensions in small to medium components and fixtures within production and inspection routines. High repeatability ±0,002 mm tolerance Nominal diameter 14.33 mm for end‑dimension checks 50 mm length in workshop execution Delivered in a transport case Repeatable dimensional checks, engineered for inspection speed The gauge pin combines a nominal diameter of 14.33 mm with a repeatability of ±0.002 mm, delivering the kind of dimensional certainty required for routine end‑measurements and go/no‑go verifications. Machined from special steel, the pin exhibits stable geometric form and consistent contact behaviour, which reduces measurement scatter when used with pin gauges, jigs or fixture bores. Classified in the micro range (10–100 mm), this size is optimised for fine, compact checks where accessibility and minimal probe deflection matter. The tight tolerance supports quick acceptance testing and in‑process checks, shortening inspection loops and improving throughput without compromising confidence in the results. Compact, workshop‑tough design for everyday handling At 50 mm length and a nominal 14.33 mm diameter, the component offers a compact footprint while providing enough reach for most small assemblies. The workshop version finish prioritises robustness: surface hardening and precision grinding preserve the contact geometry under repeated use. The modest mass and ergonomic dimensions allow easy insertion and removal from bores and fixtures, enhancing efficiency on the shop floor. Supplied in a transport case, the pin is protected during storage and transit, reducing the risk of accidental damage and keeping the datum surface ready for immediate use. Traceability, identification and practical integration The part is supplied with clear identification (SKU M323.E33, GTIN 4061905070051) to simplify inventory management and ordering. The material choice — special steel — balances wear resistance and machinability, making it suitable for frequent contact with standard ferrous materials encountered in machining and assembly. For applications that require documented calibration, please enquire about calibration options; the standard delivery contains the gauge pin ready for use in routine verification tasks. Metav’s product range and logistical setup support straightforward replenishment for workshops and quality departments seeking a dependable, compact gauge solution. Contact Metav Werkzeuge for sample availability or technical matching to inspection fixtures — our specialists in Emmerich will advise on suitability and supply options. Technical Data Article number: M323.E33 GTIN: 4061905070051 Brand: Metav IndustryLine Numbers / Core technical data Nominal diameter: 14.33 mm Length: 50 mm Tolerance / repeatability: ±0.002 mm Weight: 0.1 kg Special features / Versions Workshop execution Material: special steel Supplied in transport case Category: gauge pin (Messstifte) FAQ What is the intended use of this gauge pin? The Prüfstift, einzeln, 14,33 mm Länge 50 mm is intended for quick verification of end dimensions, bore checks and go/no‑go assessments in workshop and production inspection tasks. What precision can be expected during routine use? A repeatability of ±0.002 mm is specified for the gauge pin; in practice this yields consistent results for end‑dimension checks when used with stable fixtures and proper handling. Is the material suitable for frequent contact with steel components? Yes — the pin is manufactured from special steel, offering wear resistance appropriate for repeated measurements against standard ferrous components. How is the item identified for inventory and reordering? The item carries SKU M323.E33 and GTIN 4061905070051 to facilitate stock management and straightforward reorder processes. Does the delivery include protective packaging? The gauge pin is supplied in a transport case to protect the measuring surfaces during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.34mm Gauge Pin, 50mm Length, Special Steel, Workshop Version, Supplied in Case - Metav IndustryLine
Precision, durability and workshop-ready design come together in this single gauge pin: a 14.34 mm nominal diameter with a tight ±0.002 mm manufacturing tolerance and a 50 mm engagement length for repeatable end-dimension checks. Order the pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single, 14.34 mm; 50 mm length (Metav IndustryLine) A gauge pin, single, 14.34 mm intended for precise end-dimension verification and bench testing in workshop metrology. 14.34 mm nominal diameter 50 mm engagement length ±0.002 mm manufacturing tolerance Special steel construction Workshop version for robust use Reliable reference for end-dimension verification The M323.E34 functions as a stable reference element where dimensional certainty matters. With a nominal diameter of 14.34 mm and a documented ±0.002 mm tolerance, this gauge pin provides a clear go/no-go condition for end-measurements and assembly checks. The specified tolerance reflects manufacturing precision that reduces uncertainty in comparative gauging and pass/fail decisions, enabling consistent inspection routines and helping to avoid costly rework or field failures. Material and handling that support longevity Constructed from special steel, the pin is shaped for dimensional stability and wear resistance under frequent use in workshop environments. The 50 mm engagement length gives sufficient contact depth for typical bore and seat checks while keeping handling straightforward; the overall mass (0.1 kg) balances robustness with easy placement in fixtures. The compact, single-piece format suits fast manual checks and integration into jigs where fixed reference points are required, reducing setup time and improving throughput. Designed for workshop workflows and fixture integration As a workshop version gauge pin, the item is intended for repetitive use on the shop floor rather than purely for laboratory comparison. Its geometry and finish support tactile insertion and rapid verification of end dimensions, making it suitable for bench checks, fixture set-up and quick inspection stations. Where traceable instrument chains are maintained, this pin can act as a practical transfer standard between gauging tools and final assembly controls, enhancing process reliability across production steps. Contact Metav Werkzeuge for tailored application advice and fast supply from Emmerich — our specialists will confirm suitability of the M323.E34 gauge pin for specific tasks and support integration into existing inspection routines. Technical data Article number: M323.E34 GTIN: 4061905070068 Brand: Metav IndustryLine Facts Diameter: 14.34 mm Engagement length: 50 mm Manufacturing tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Single-piece delivery Category: gauge pins FAQ What is the manufacturing tolerance of this gauge pin? The M323.E34 gauge pin is manufactured to a tolerance of ±0.002 mm, providing a precise reference for end-dimension checks in workshop environments. Which material is used for the pin? This gauge pin is made from special steel, chosen for dimensional stability and wear performance suitable for repetitive use on the shop floor. Is the length suitable for bore and seat checks? With a 50 mm engagement length, the pin offers sufficient contact depth for most bench-level bore and seat verifications and is practical for fixture integration. Can the pin be used in assembly jigs and fixtures? Yes, the workshop-design M323.E34 is intended for robust use in jigs and fixtures where a repeatable reference diameter is required. How is the product supplied? The gauge pin is supplied as a single piece under the article number M323.E34 and is categorised as a gauge pin from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.35mm Gauge Pin 50mm Workshop Version, Special Steel ±0.002mm - Metav IndustryLine
Take advantage of workshop‑grade durability and micrometre‑level accuracy: the combination of a 14.35 mm nominal diameter, ±0.002 mm tolerance and a 50 mm length delivers consistent end‑dimension checks and reliable jig set‑up. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.E35 Gauge pin – 14.35 mm diameter, 50 mm length (Metav IndustryLine) A M323.E35 gauge pin designed for precise end‑measurements and fixture verification in workshop metrology. Workshop‑grade construction Diameter 14.35 mm for end measurement Tolerance ±0.002 mm Special steel for wear resistance Delivered in transport case Dependable micrometre‑level accuracy for routine checks The gauge pin offers a defined nominal diameter of 14.35 mm with a guaranteed variation of ±0.002 mm, enabling repeatable end‑measurements where small deviations matter. Such precision supports efficient go/no‑go checks and contributes to faster decision making on the shop floor, reducing rework rates. The tight tolerance is suited for quality control tasks where a stable reference diameter shortens inspection cycles and increases throughput. Built for the workshop — durable, easy to handle and store Manufactured from special steel, the probe is produced in a workshop‑grade specification for robust everyday use. The compact 50 mm length and 0.1 kg mass make handling straightforward during fixture set‑up or when stacking pins for comparative measurements. Delivery includes a transport case, ensuring safe storage and protected transport between workstations or job sites, which preserves surface integrity and helps maintain measurement reliability over time. Integrates with existing inspection and set‑up procedures Designed as a discrete gauge instrument, this pin complements bench metrology tools and jigs: it functions as a quick reference for bore checks, end‑dimension verification and alignment tasks. When used alongside dial gauges or optical comparators, the pin assists in establishing repeatable datum points and accelerates setup. The clear specification and robust finish simplify inventory and procurement, making the item a practical choice for production, maintenance and toolroom environments. For workshop‑ready precision and purchase information, contact Metav Werkzeuge in Emmerich for technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.E35 GTIN: 4061905066245 Category: Gauge pin / Test pin Facts Diameter: 14.35 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Delivered in transport case FAQ What tolerance does the gauge pin offer? The M323.E35 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for fine end‑dimension checks. Which material is used for this test pin? This gauge pin is manufactured from special steel, providing wear resistance appropriate for workshop use. Is the pin suitable for bore and end measurements? Yes — the M323.E35 functions as a reference for both end‑dimension verification and bore checking within its nominal diameter. Does the product include protective packaging? The gauge pin is supplied in a transport case to protect the surface and support safe storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.36mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a workshop-grade measuring aid that combines high repeatability, a ±0.002 mm tolerance and robust material for reliable end‑size verification; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single — 14.36 mm Ø, 50 mm length (Metav IndustryLine) A precision workshop gauge pin, single, 14.36 mm intended for end‑size checks and fixture alignment in metalworking and toolroom environments. Workshop version for robust daily use Precision tolerance ±0.002 mm Ø 14.36 mm with 50 mm overall length Supplied in protective transport case Durable design for everyday workshop use The workshop design places emphasis on long‑term reliability and ease of handling. Machined from special steel, the pin resists wear under regular contact and maintains its form in common production conditions. The solid construction reduces deformation risk during insertion and removal, so measurements remain consistent; the inclusion of a protective case also protects the gauge during storage and transport, reducing downtime from damaged tools. Accuracy that supports dependable quality control With a declared tolerance of ±0.002 mm, this measuring pin delivers the precision required for tight end‑size verification and plug‑gauge tasks. Such a tolerance level suits quality checks where small deviations affect assembly fit or functional clearance. The nominal diameter of 14.36 mm combined with the 50 mm overall length gives a stable contact area for bore and gauge tests, enabling quick go/no‑go assessments and supporting reproducible results in repeat inspection cycles. Simple integration into workshop processes The single gauge pin format keeps usage straightforward: install in fixtures, use as a reference for alignment or check mating parts during set‑up. The moderate mass and compact length help with handling and reduce operator fatigue during repetitive checks; the item's workshop version designation indicates readiness for shopfloor routines rather than delicate laboratory use. Clear labelling and the robust transport case streamline storage and tool management, aiding traceability and reducing replacement frequency. For consistent, workshop‑grade results choose Metav IndustryLine — contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and prompt delivery. Technical data Article number: M323.E36 GTIN: 4061905066771 Material: Special steel Label: Gauge pin, single, 14.36 mm length 50 mm Facts Diameter: 14.36 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Supplied in protective transport case Single gauge pin for end‑size verification Category: Gauge pins FAQ What is the declared tolerance of this gauge pin? The gauge pin M323.E36 from Metav IndustryLine has a declared tolerance of ±0.002 mm, suitable for precise end‑size checks and tight assembly tolerances. Which material is used for the pin? The M323.E36 gauge pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop environments. Is a case included for transport and storage? Yes, the gauge pin is supplied in a protective transport case to safeguard the pin during transit and storage. For which applications is this pin recommended? This single gauge pin is intended for end‑size verification, fixture alignment and go/no‑go checking in metalworking, toolroom and general workshop settings. How should the gauge pin be stored to preserve accuracy? Store the pin dry in its protective case after cleaning; avoid corrosive environments and abrasive contact to preserve the declared ±0.002 mm tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.37mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of high repeatability, compact dimensions and robust workshop design for consistent end‑size checks; the precise diameter and tight tolerance support efficient inline inspection and reduce rework. Order supply directly via Metav Werkzeuge or consult the technical team for application advice. M323.E37 — Gauge pin, 14.37 mm diameter, 50 mm length (Metav IndustryLine) A M323.E37 gauge pin for precision size verification and end‑measure inspection in workshop metrology. Workshop design for daily use Diameter 14.37 mm, length 50 mm Special steel, hard‑wearing surface Tolerance ±0.002 mm for fine control Proven precision for routine inspection The compact inspection pin is engineered for reliable repeatability in production and maintenance environments. With a diameter of 14.37 mm and a length of 50 mm, the component is suited to quick end‑measure checks and reference gauges where space and handling matter. The declared tolerance of ±0.002 mm positions this pin for fine control tasks that demand narrow deviation bands; such accuracy reduces scrap rates and shortens inspection cycles, improving process throughput. Robust handling and workshop suitability Constructed from special steel and finished for daily use, the item delivers long service life under frequent contact and insertion. The workshop version emphasises field‑ready durability while keeping handling straightforward: its modest weight (0.1 kg) supports fast manual checks without operator fatigue. Delivered in a transport case for secure storage and movement, the pin preserves calibrated geometry between uses and simplifies inventory management for toolrooms and quality stations. Practical integration and traceability As a simple measurement artefact, the pin supports quick go/no‑go or reference checks and integrates seamlessly into established inspection routines. The compact form factor aids placement in fixtures or within gauge sets, while clear identification (SKU and GTIN) enables traceable inventory control. The combination of precise tolerance, durable material and secure delivery helps maintain calibration intervals and lowers the effort required for routine verification. For reliable workshop inspection tools and expert advice on application or compatibility, contact Metav Werkzeuge — Manufacturer / Responsible: Metav Werkzeuge GmbH — via info@metav-werkzeuge.com or call +49 2822 7131930 for supply and guidance. Technical Data SKU: M323.E37 GTIN: 4061905066788 Label: PrüfÂstift, einzeln, 14,37 mm Länge 50 mm Facts Diameter: 14.37 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm ECLASS: 21170231 Special features Material: special steel Workshop version Delivered in transport case FAQ What inspection tasks is this gauge pin suited for? The gauge pin is intended for end‑measure checks, reference sizing and quick go/no‑go evaluations; the 14.37 mm diameter and tight ±0.002 mm tolerance make it suitable for fine control tasks in workshop metrology. Is the pin delivered ready for use or does it require preparation? The inspection pin arrives ready for workshop use; the robust finish and transport case ensure the geometry is preserved for immediate application in routine checks. Can the pin be used in fixture measurements or gauge sets? Yes, the compact dimensions and precise diameter permit integration into fixtures and gauge assemblies, where the pin serves as a stable reference element for repeatable measurements. How does the material affect longevity and surface contact? Made from special steel, the pin offers enhanced wear resistance and dimensional stability under repeated contact, supporting longer service life in daily inspection environments. How is traceability provided for inventory and quality records? Identification via SKU M323.E37 and GTIN 4061905066788 supports catalogue tracking and traceable procurement within quality management systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.38mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine workshop-grade durability, a compact 50 mm length and a narrow ±0.002 mm tolerance for dependable end-measure checks; order the gauge pin M323.E38 directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin, single, 14.38 mm, length 50 mm – Metav IndustryLine gauge pin with ±0.002 mm accuracy The gauge pin 14.38 mm is a precision end-measure pin designed for workshop inspection, fixture alignment and repeatable locating tasks in industrial metrology Workshop-grade finish, robust for regular use Diameter 14.38 mm with ±0.002 mm tolerance 50 mm working length for end-measure applications Supplied in transport box for secure handling Precision that keeps tolerances in check The Metav IndustryLine gauge pin delivers a declared tolerance of ±0.002 mm, which positions it for fine inspection tasks where dimensional conformity matters. That level of precision supports reproducible go/no‑go checks and close-mating fits in assemblies, reducing the risk of rework. Stated as a numeric performance parameter, the tolerance gives an objective basis for acceptance in quality-control protocols and helps integrate the pin into existing measurement routines. Built for the workshop — robust handling and secure storage Manufactured from special steel, the pin is specified as a workshop version, offering a combination of dimensional stability and mechanical resilience for everyday use. The design keeps handling straightforward while the compact mass aids precise placement in fixtures. Delivery in a dedicated transport box protects the pin during storage and transit, ensuring the measuring surface remains intact until the moment of use and supporting traceable organisation on the shop floor. Integrates into inspection and assembly workflows With a nominal diameter of 14.38 mm and a 50 mm overall length, the pin is intended for end-measure applications such as reference gauging, locating pins in jigs and quick verification of bore diameters. The compact format eases positioning in confined setups and permits rapid swapping during batch checks. By combining a small footprint with a clearly specified tolerance, the pin supports both manual inspection routines and semi-automated quality checks where consistent reference dimensions are required. Contact Metav Werkzeuge today to specify the Metav IndustryLine gauge pin M323.E38 for workshop inspection, request application advice or supply details via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.E38 GTIN: 4061905066795 Label: Gauge pin, single, 14.38 mm length 50 mm Facts Diameter: 14.38 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: special steel Supplied in transport box Category: gauge pin Story trigger: end gauges FAQ What tolerance does this gauge pin offer? The Metav IndustryLine gauge pin M323.E38 is specified with a tolerance of ±0.002 mm for repeatable inspection tasks. Which material is used for the pin? The pin is manufactured from special steel, chosen for dimensional stability and robust workshop use. What are the main applications for this pin? Typical uses include end-measure checks, locating in fixtures, reference gauging and quick inspection of bore diameters. Is the pin supplied with any protective packaging? Yes, the gauge pin is supplied in a transport box to protect the measuring surfaces during storage and transit. How does the 50 mm length influence usability? The 50 mm overall length offers a compact working size that is easy to handle in confined setups while providing sufficient reach for many end-measure applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.39mm Gauge Pin 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of workshop-grade durability, ±0.002 mm dimensional accuracy and a compact 14.39 mm diameter for repeatable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.E39 — single gauge pin, Ø 14.39 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.E39 is a precision plug gauge designed for end‑dimension inspection and quick fit checks in workshop and quality control environments. Workshop-grade construction Diameter 14.39 mm exact fit Tolerance ±0.002 mm accuracy Durable special steel Repeatable accuracy for end‑dimension verification This precision pin delivers a clear measurement reference where repeatability matters: the nominal diameter of 14.39 mm combined with a verified tolerance of ±0.002 mm ensures consistent results when checking bores, pins and mating parts. Classified in the Micro range for measuring tools, the geometry and small diameter make it well suited to fine mechanical tasks and short‑reach checks. The tight tolerance reduces uncertainty during go/no‑go inspections and fixture verification, translating into fewer rejected parts and faster quality decisions on the shop floor. Robust workshop design that endures daily use Manufactured in special steel, the pin is finished for durability in workshop conditions and built to withstand frequent handling and seating cycles. The workshop version designation indicates components prepared for pragmatic use rather than fragile laboratory handling, so routine inspection and in‑process checking are straightforward. At 50 mm overall length the pin provides a stable contact area while remaining compact enough for confined setups; this balance helps maintain alignment and reduces user‑induced measurement variation. Practical handling and integration into inspection workflows The pin’s compact mass and form factor support fast insertion and withdrawal during manual inspection routines. Recorded weight and dimensions keep handling predictable: the low mass supports quick positioning, while the precise diameter minimises lateral play in tight bores. As a single gauge pin, it is intended for direct comparison and fit testing in fixtures, assembly checks and final inspection steps. When used alongside calibrated reference standards, the pin improves throughput by simplifying repetitive checks and reducing setup time for routine quality controls. For reliable end‑dimension checking with Metav IndustryLine precision, specify the gauge pin M323.E39 from Metav Werkzeuge — the Metav team in Emmerich is available to advise on application fit and delivery. Technical Data SKU: M323.E39 GTIN: 4061905066801 Description: Gauge pin, single, 14.39 mm diameter, 50 mm length Facts Diameter: 14.39 mm Length: 50 mm Weight: 0.10 kg Tolerance: ±0.002 mm Special features Material: Special steel Version: Workshop version Category: Gauge pins FAQ What applications suit this gauge pin best? The gauge pin M323.E39 is designed for end‑dimension checks, fit testing of bores and quick go/no‑go verifications in workshop and quality control contexts. How precise is the M323.E39 for inspection tasks? The M323.E39 offers a tolerance of ±0.002 mm, providing the fine reproducibility required for repeatable fit checks and high‑precision assembly controls. Which material is used for the pin and what does that mean for durability? The pin is made from special steel; this provides a durable contact surface appropriate for frequent workshop use and repeated seating cycles. Can the pin be used for very small bores or fine mechanical work? Yes — the 14.39 mm diameter and Micro‑class dimensions make the pin suitable for fine mechanical tasks and confined inspection setups. Does the product include a traceable identifier for stock and logistics? Yes, the item is supplied with GTIN 4061905066801 and SKU M323.E39 for inventory and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.3mm Test Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise, workshop‑grade measuring for reliable end‑measurements: a 14.3 mm gauge pin with ±0.002 mm tolerance and robust special‑steel construction ensures repeatable checking and low rework rates. Order directly via Metav Werkzeuge or contact our consultants for specification advice. Gauge pin M323.E30 — single 14.3 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.E30 is a single, workshop‑grade checking pin designed for routine dimensional verification and end‑measurements in production and inspection fixtures. Workshop version with durable finish Diameter 14.3 mm for precision fits Length 50 mm for stable support Tolerance ±0.002 mm for repeatable checks Consistent dimensional control for everyday inspection A compact checking pin like this supports reliable go/no‑go and fit checks on shafts, bores and assembly jigs. The ±0.002 mm specification describes the maximum deviation from nominal diameter and translates directly into reduced measurement uncertainty during routine checks. Produced in special steel, the pin combines hardness with wear resistance, so calibration intervals are extended and downtime is reduced. For shops that prioritise throughput, the ability to trust a fixed reference dimension speeds up takt time without sacrificing accuracy. Built for workshop handling and longevity The 50 mm length gives sufficient engagement for most bench and jig applications while keeping the pin stiff and easy to locate. The special‑steel material provides a balance between toughness and surface durability, lowering the risk of deformation during handling. Supplied in a protective transport case, the pin is protected against knocks and corrosion during storage and movement between workstations. The workshop‑grade design emphasises robustness: less frequent replacement and predictable behaviour under repeated use support more efficient inspection routines. Practical traceability and integration into quality workflows Marked with SKU M323.E30 and GTIN for ordering and inventory control, the pin fits seamlessly into existing measurement sets and inspection protocols. Its compact form factor makes it suitable for bench gauges, fixture assemblies and portable inspection kits used in machining and assembly. Clear technical data and consistent manufacturing tolerances make this component a dependable reference for first‑article checks and periodic verification procedures, helping to reduce scrap and support process capability goals. For specification guidance or to procure this Metav IndustryLine gauge pin with SKU M323.E30, contact Metav Werkzeuge for tailored advice and reliable delivery to your workshop. Technical Data Article number: M323.E30 GTIN: 4061905069703 Brand: Metav IndustryLine Facts Diameter: 14.3 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Supplied in transport case Single gauge pin FAQ What nominal size and length does this checking pin have? The checking pin is specified as a 14.3 mm diameter pin with a 50 mm length, supplied under SKU M323.E30 from Metav IndustryLine. How precise is the diameter of the pin? Diameter precision is ±0.002 mm, which ensures the gauge pin meets tight checking tolerances required for reliable fit and assembly inspections. Is the pin suitable for routine workshop use? Yes — the workshop‑grade construction and special‑steel material make this pin suitable for regular use in inspection jigs and bench checks. How is the pin supplied to protect it in transport? The pin is delivered protected in a transport case to prevent damage and maintain surface quality during storage and movement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.41mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine workshop-grade durability with tight ±0.002 mm repeatability and a precise 14.41 mm diameter for dependable end‑measurement tasks; the solid Special steel construction and 50 mm length ensure robust handling and long service life. Order this gauge pin directly via Metav Werkzeuge or consult our technical advisers for specification checks. Gauge pin M323.E41 (14.41 mm; 50 mm length) – Metav IndustryLine Gauge pin M323.E41 is a single, workshop‑grade precision gage pin designed for end‑dimension verification and plug‑gauging operations in production environments Precision diameter 14.41 mm, tolerance ±0.002 Special steel for wear resistance and stability 50 mm length for fixture and bore checks Workshop‑grade finish for robust daily use Consistent measurement accuracy that speeds quality control The M323.E41 functions as a direct, low‑overhead means to validate final dimensions and bores. With a 14.41 mm nominal diameter and a guaranteed ±0.002 mm variation, the pin supports tight tolerance checks without elaborate set‑ups. This level of precision reduces rework rates and shortens inspection cycles by enabling immediate go/no‑go decisions on production lots. For batch sampling and end‑of‑line checks, the component offers a straightforward, reproducible reference that integrates easily into existing gaging fixtures. Durable construction for frequent workshop use Manufactured from Special steel, the pin resists wear and maintains dimensional integrity under repeated insertion and removal. The 50 mm shaft length provides adequate engagement for most small‑ to medium‑diameter bores while remaining compact enough for handheld or fixture use. The workshop‑grade finish enhances surface robustness and simplifies cleaning, so inspection routines stay reliable across shifts. Where traceability and repeatability are required, the solid construction delivers predictable service life and lower total cost of ownership. Practical applications and handling benefits This single gauge pin is suited for plug‑gauging bores, end‑dimension controls and use as a hardened reference in jig and fixture set‑ups. Its compact format and modest mass aid quick handling during serial inspection, and the clearly defined tolerance supports documented acceptance criteria in quality records. As a familiar workshop tool, it slots into routine processes without training overhead and complements gauging sets where a discrete, certified reference diameter is needed for fast verification. Choose Metav IndustryLine gauge pins for dependable, workshop‑ready precision — contact Metav Werkzeuge for availability and professional specification advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.E41 GTIN: 4061905066825 Manufacturer: Metav IndustryLine Material: Special steel Weight: 0.1 kg Nominal diameter: 14.41 mm Length: 50 mm Accuracy: ±0.002 mm Designation: Gauge pin, single Feature: Workshop‑grade execution Core technical figures Diameter: 14.41 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features and applications Single gauge pin for plug‑gauging Material suitability: wear‑resistant special steel Workshop execution for daily industrial use Suitable for end‑dimension verification and fixture reference FAQ What is the exact diameter tolerance of the gauge pin? The gauge pin M323.E41 is specified with a tolerance of ±0.002 mm on the 14.41 mm nominal diameter. Which material is used for this pin and why does it matter? The pin is made from Special steel, chosen for its wear resistance and dimensional stability under repeated use in workshop environments. Is this pin suitable for use in fixtures and jigs? Yes, the 50 mm length and robust construction make the M323.E41 well suited for fixture integration and repeated plug‑gauging operations. Does the product data include a calibration certificate? The product data does not state that a calibration certificate is supplied with the gauge pin. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com