Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
15.9mm Test Pin Length 50mm Workshop Finish - Metav IndustryLine
A compact, workshop-grade test pin that combines special steel durability with a tight ±0.002 mm tolerance to ensure consistent end-measurement results; supplied in a transport box for safe handling — order the test pin directly via Metav Werkzeuge or consult their specialists for application advice. Test pin M323.F90 — Gauge pin Ø15.9 mm, 50 mm length (Metav IndustryLine) The Test pin M323.F90 is a workshop-ready gauge pin designed for precise end-measurement checks and fixture integration in metalworking and inspection environments. Workshop-grade construction for rugged use Diameter 15.9 mm for end-measurement applications Length 50 mm for accessible probe reach Tolerance ±0.002 mm for high repeatability Consistent precision where it matters The M323.F90 delivers high repeatability through a measured tolerance of ±0.002 mm, a specification that keeps measurement scatter to a minimum during routine inspections. Such a tight deviation is particularly relevant for comparative and go/no-go checks, where reproducible contact geometry prevents cumulative error in assembly and test fixtures. Explaining the figure in practical terms: the stated tolerance ensures the probe returns virtually identical results across repeated contacts, reducing rework and inspection time while supporting reliable process control. Durable design for everyday workshop use Built in a workshop-grade configuration from special steel, this gauge pin withstands the mechanical demands of shop-floor handling and repeated seating in fixtures. The 50 mm length provides sufficient reach for many end-measurement scenarios without compromising stiffness, while the 15.9 mm diameter offers a stable contact area for contact probes, alignment pins and verification gauges. Supplied in a protective transport box, the pin is protected during storage and transit, helping to preserve surface condition and dimensional integrity between uses. Practical integration and operational benefits As a single gauge pin, this component simplifies inventory and fixture configuration: the compact form factor trims set-up time and makes replacement straightforward. The robust specification supports frequent mounting in test jigs and alignment tools, shortening inspection cycles and improving throughput. For tailored application guidance or compatibility checks with existing fixtures, Metav IndustryLine specialists can advise on optimal deployment and handling to maximise the pin’s service life and measurement stability. For assured availability and expert specification support for the M323.F90 test pin, contact Metav Werkzeuge GmbH in Emmerich — their specialists will advise on fixture compatibility and supply logistics. Technical data Article number: M323.F90 GTIN: 4061905068287 Label: Test pin, single, Ø15.9 mm, length 50 mm Material: Special steel Workshop execution Numerical data Diameter: 15.9 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Measurement range: 15.9 mm Special features Workshop-grade design Delivered in transport box Single test pin for end-measurement checks Category: Gauge pins Application: End-measurement and fixture integration FAQ What is the declared tolerance for this gauge pin? The test pin M323.F90 is specified with a tolerance of ±0.002 mm, providing the repeatability required for precise end-measurement tasks. Which material is used and is it suited for workshop use? Manufactured from special steel, the M323.F90 is designed for workshop conditions and frequent handling while maintaining dimensional stability. Is the pin delivered protected for transport? Yes, the gauge pin is supplied in a transport box to protect the contact surfaces and ensure safe storage and transit. What applications suit this gauge pin? The M323.F90 is suitable for end-measurement checks, fixture pins, alignment tasks and integration into inspection jigs where a 15.9 mm contact diameter and 50 mm reach are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15/16" 20 TPI UNEF Thread Go Gauge Right-Hand Hardened Gauge Steel ANSI/ASME B1.1 2B - Metav IndustryLine
Take advantage of a hardened gauge steel construction and exact UNEF 15/16 x 20 form for reliable internal thread inspection; the tolerance class 2B and ANSI/ASME conformity ensure consistent pass/fail control in production. Order directly via Metav Werkzeuge or consult our specialists for application advice. Thread Plug Gauge UNEF 15/16 x 20 — 2B, hardened gauge steel (Metav IndustryLine) A Thread Plug Gauge UNEF 15/16 x 20 (2B) designed for quick verification of internal thread form and tolerance in workshop and quality‑control environments. Right-hand UNEF 15/16 x 20 thread form Tolerance class 2B to ANSI/ASME B1.1 Hardened gauge steel construction Inspection grade for workshop use Fast, unambiguous pass/fail control for UNEF threads A hardened gauge steel plug provides a tactile, immediate check of internal threads. The 15/16 x 20 designation identifies the nominal diameter and thread density (20 threads per inch), while the 2B tolerance class denotes the standard internal thread fit defined by ANSI/ASME B1.1. Using this plug gauge streamlines inspection routines: if the gauge engages smoothly to the limit shoulder the thread is within tolerance, otherwise the feature is flagged for correction. This simple method reduces measurement time and prevents prolonged setup checks on the production line. Consistent measurement behaviour that reduces rework The right‑hand UNEF geometry and hardened material mean the gauge resists wear and maintains form under repeated use; this promotes reproducible checks over many cycles. For shops and inspection benches, reproducibility translates directly into lower scrap rates and fewer customer complaints because the inspection tool enforces the same acceptance criterion every time. The physical gauge removes ambiguity that can occur with subjective visual checks or improvised gauges, offering a robust means to protect assembly fit and functional reliability. Standards compliance that supports quality systems Conformity to ANSI/ASME B1.1/B1.2 and the explicit 2B tolerance class ensures compatibility with common engineering drawings and inspection plans. For procurement and quality teams, this means the gauge can be referenced directly in control plans, certificates and inspection records. The compact, single‑piece design suits routine checks in machine shops, toolrooms and incoming inspection, where traceable, standardised methods are required for auditability and supplier acceptance. Contact Metav Werkzeuge to add this Metav IndustryLine thread plug gauge (SKU M315.929.EF) to your inspection kit and discuss immediate dispatch from Emmerich Technical Data Article number: M315.929.EF GTIN: 4054469179766 Weight: 0.3 kg Material: hardened gauge steel Standard: ANSI/ASME B1.1/B1.2 Thread size: 15/16" x 20 Tolerance class: 2B Feature: right‑hand thread Tariff number: 90173000 ECLASS: 21170214 Numbers / Core technical data Diameter: 15/16" Pitch: 20 TPI Weight: 0.3 kg Tolerance class: 2B GTIN: 4054469179766 Special features / Versions Right‑hand UNEF thread form Designed for internal thread inspection Hardened gauge steel for wear resistance Workshop/inspection grade tool Category: plug gauge / thread gauge FAQ What size and thread form does this gauge check? The Thread Plug Gauge UNEF 15/16 x 20 (2B) checks internal UNEF threads with a nominal size of 15/16" and 20 threads per inch. Is the gauge suitable for use in a workshop inspection routine? Yes. The Metav IndustryLine plug gauge is manufactured as an inspection grade tool intended for workshop and quality‑control benches and is robust enough for frequent use. What standard and tolerance does the gauge conform to? This gauge conforms to ANSI/ASME B1.1/B1.2 and verifies the 2B tolerance class for internal threads. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, which preserves thread form under repeated engagement and ensures consistent inspection results. Can this gauge be referenced in quality documentation? Yes. The Metav IndustryLine plug gauge (SKU M315.929.EF) can be recorded in control plans and inspection records as the acceptance tool for the specified UNEF thread. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15/16" UNEF Thread Go/No-Go Ring Right-Hand 20 TPI ANSI B1.1 2A - Metav IndustryLine
Take advantage of hardened gauge steel, ANSI/ASME B1.1 conformity and tolerance class 2A for fast, repeatable verification of external threads; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge UNEF NOGO, 15/16-20 ANSI/ASME B1.1 / 2A — NOGO external thread ring, hardened gauge steel, right-hand thread The Thread ring gauge UNEF NOGO, 15/16-20 ANSI/ASME B1.1 / 2A is a hardened no-go ring designed for rapid verification of external UNEF threads on finished parts, ensuring conformity with industry thread form standards and consistent production quality. Hardened gauge steel construction Conforms to ANSI/ASME B1.1 thread standard NOGO function for quick external checks Right-hand thread, 15/16-20 UNEF size Reliable inspection through hardened construction The ring is manufactured from hardened gauge steel, giving it the rigidity required for frequent use on the shop floor. Hardened material reduces wear and preserves the go/no-go profile so that checks remain consistent over time. The mechanical stability of the gauge translates directly into fewer false rejects and more predictable process control, which supports efficient batch inspection and reduces rework. Conformity with recognised thread standards Built to ANSI/ASME B1.1, the ring matches the official UNEF profile and pitch conventions; the designation 15/16-20 denotes an external thread with 20 threads per inch on a 15/16-inch nominal diameter. Using a gauge that adheres to a formal standard guarantees compatibility with mating parts manufactured elsewhere and simplifies acceptance criteria in quality documentation. NOGO function explained and practical benefit As a NOGO ring, this tool is intended to detect oversized or incorrectly formed external threads: the part must not enter the NOGO member when within tolerance. This single-purpose check accelerates routine inspections and reduces interpretation effort compared with dimensional measurements alone. The clear pass/fail nature of the NOGO test increases throughput on production lines while maintaining objective evidence for quality records. Workshop suitability and traceability With a compact mass of 0.4 kg and a robust design, the ring is easy to handle during repeated checks and resists the knocks typical in industrial environments. The tolerance class 2A specifies manufacturing tightness suitable for standard commercial and industrial fits, offering a practical balance between accuracy and durability. The product's GTIN and SKU support traceability in procurement and inventory systems, assisting calibration cycles and asset management. For precise thread verification with Metav IndustryLine quality, contact Metav Werkzeuge for ordering or technical matching — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and delivery options. Technical Data Article number: M315.989.EF GTIN: 4054469181042 Label: Thread ring gauge UNEF NOGO, 15/16-20 ANSI/ASME B1.1 / 2A Manufacturer: Metav IndustryLine Facts Mass: 0.4 kg Size: 15/16" (15/16-20) Pitch/threads per inch: 20 Tolerance class: 2A Special features Material: hardened gauge steel Thread orientation: right-hand thread Function: NOGO ring for external thread inspection Standard: ANSI/ASME B1.1/B1.2 FAQ What is a NOGO ring used for? A NOGO ring is used to verify that an external thread does not exceed the maximum material condition; the Thread ring gauge UNEF NOGO, 15/16-20 ANSI/ASME B1.1 / 2A must not fit an out-of-tolerance thread, providing a decisive pass/fail result. Which standard does this gauge follow? The gauge conforms to ANSI/ASME B1.1, ensuring the thread form and pitch meet widely recognised UNEF specifications for interchangeability. Is this gauge suitable for left-hand threads? No — the gauge features a right-hand thread orientation as stated in the product data and is intended for standard right-handed external UNEF threads. What material is the ring made from and why does that matter? The ring is made from hardened gauge steel, offering wear resistance and dimensional stability so that inspection results remain reliable during routine use. How should the ring be used in a quality inspection routine? Apply the NOGO ring to the external thread; a correct part will not pass the NOGO member. Record the result as part of regular batch sampling to maintain traceable quality evidence for the Thread ring gauge UNEF NOGO, 15/16-20 ANSI/ASME B1.1 / 2A. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15/16" x 20 UNEF Thread Go Gauge Right-Hand, Hardened Gauge Steel, ANSI/ASME B1.1/B1.2 - Metav IndustryLine
Take advantage of a combination of ANSI/ASME conformity, hardened gauge steel construction, and a precise 2A external thread tolerance to keep thread production within specification and reduce rework. Order the gauge from Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge UNEF GO 15/16-20, ANSI B1.1 / 2A — Metav IndustryLine, hardened gauge steel, right-hand thread The Thread Ring Gauge UNEF GO 15/16-20, ANSI B1.1 / 2A is a hardened GO ring gauge designed to verify external UNEF 15/16‑20 threads to ANSI/ASME tolerances for production and incoming inspection. Hardened gauge steel construction Conforms to ANSI/ASME B1.1 standard UNEF 15/16‑20 GO, tolerance class 2A Right‑hand thread form Ensure thread quality with repeatable GO testing A GO ring gauge is the fastest way to confirm that an external thread meets its major diameter and form limits without elaborate measurement setups. Manufactured in hardened gauge steel, this GO ring provides a durable pass condition check that integrates seamlessly into shop‑floor inspection routines. Using a GO ring for quick acceptance tests reduces machine downtime and limits scrap by identifying out‑of‑tolerance threads early. The combination of the UNEF 15/16‑20 pitch and 2A tolerance class ensures compatibility with components produced to ANSI/ASME B1.1 standards. Standards compliance for reliable interchangeability Conformity to ANSI/ASME B1.1 means the gauge corresponds to established U.S. Unified thread definitions, making it suitable for international production and maintenance tasks where thread interchangeability is essential. The specification 15/16‑20 denotes the nominal diameter and threads per inch, and the 2A designation specifies the external thread tolerance band; together they define the acceptance window for mating parts. For procurement and quality documentation, the gauge supports traceable inspection processes and clear pass/fail criteria. Durable design for workshop environments Constructed from hardened gauge steel, the ring resists wear during repeated use and preserves inspection accuracy over time. The item is supplied as a GO ring for right‑hand threads, suitable for routine throughput inspection at assembly stations or incoming goods checks. Its compact, single‑piece form factor is easy to handle and speeds up tactile checking compared with more elaborate metrology tools, offering a practical balance between robustness and operator convenience. Practical application and inspection guidance In practice, the GO ring gauge is passed over the external thread; a correct fit indicates the part meets the specified major diameter and form requirements for a GO condition. This method supports rapid decisions at the bench: accepted parts proceed to assembly, while failures prompt corrective action. For documentation purposes, note the ring’s GTIN and article number during inspection reporting to maintain traceability and audit trails within quality management systems. Choose the Metav IndustryLine thread ring gauge for dependable, standards‑based GO testing and contact Metav Werkzeuge for tailored advice or order support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.959.EF GTIN: 4054469180403 Label: Thread Ring Gauge UNEF GO, 15/16 x 20 ANSI B1.1 / 2A Numbers / Core technical data Nominal size: 15/16" Threads per inch: 20 tpi Tolerance class: 2A Weight: 0.4 kg Tariff number: 90173000 eClass: 21170214 Special features / Materials Material: gauge steel, hardened Thread form: UNEF (Unified Extra Fine) Type: GO ring gauge for external threads Standard: ANSI/ASME B1.1/B1.2 Thread direction: right‑hand FAQ What does the GO designation mean for this ring gauge? The GO designation indicates that the ring gauge is intended to check whether an external thread fits within the allowable acceptance limits; the Thread Ring Gauge UNEF GO 15/16‑20, ANSI B1.1 / 2A provides a pass condition for parts manufactured to the matching ANSI external thread specification. Is this gauge suitable for international compatibility checks? Yes, the gauge follows ANSI/ASME B1.1 definitions, so the Metav IndustryLine ring is suitable for verifying parts where unified thread interchangeability with US‑based standards is required. How does the 2A tolerance class affect inspection results? The 2A tolerance class denotes the external thread tolerance band; a passing fit with the 15/16‑20 GO ring confirms the thread sits within the specified dimensional limits for that class, ensuring expected mating performance with corresponding internal threads. Can this ring gauge be used for left‑hand threads? No, this specific item is manufactured as a right‑hand thread GO ring; left‑hand forms require a dedicated gauge made to the same nominal and tolerance specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS 3 - Metav IndustryLine
Take advantage of a combination of standards-compliant accuracy, hardened, lapped construction, and a stable Form C geometry for reproducible diameter checks and setup. The result is reduced rework and reliable process control on the shop floor — order the setting ring directly via Metav Werkzeuge or consult our specialists for application advice. Setting ring 150 mm — hardened, lapped gauge steel (DIN 2250) The Setting ring 150 mm is a precision ring gauge for external-diameter setting and inspection, designed for shop‑floor quality control and toolmaking applications in accordance with DIN 2250 and DIN 286 Hardened, lapped gauge steel Conforms to DIN 2250 and DIN 286 Tolerance JS 3 for precision fits Form C geometry for ring gauges Ensure consistent, standards-based inspection results The ring gauge is manufactured from hardened and lapped gauge steel, which provides a wear-resistant contact surface and stable reference geometry. Compliance with DIN 2250 and DIN 286 and the specified JS 3 tolerance class makes it suitable for reproducible go/no‑go checks and for setting gauges or mandrels used in production monitoring. Using a standards‑matched control gauge reduces uncertainty in routine checks and supports consistent part acceptance criteria. Robust design that keeps measurement drift low A Form C configuration combines a compact contact profile with mechanical stability, reducing the risk of profile deformation under handling. The lapped finish minimises asperities that accelerate wear, while the hardened substrate extends service life under frequent use. These material and geometric choices translate into fewer replacements, less downtime and a reliably repeatable reference for assembly and machining operations. Practical handling and integration into workflows At a nominal diameter of 150 mm and a weight of 4.1 kg, the gauge balances heft for stability with manageable handling in typical inspection benches. The ring is intended as a fixed reference for external diameter control, useful in bench setups, inspection stands or as a master for calibrating measuring fixtures. Labelling with GTIN and SKU ensures traceable inventory management and simplifies integration into procurement and quality systems. Applications where measurement confidence matters This ring gauge is well suited to toolrooms, component manufacturers and in‑house quality departments that require a certified reference for diameter checks, fixture setup and sampling control. The combination of normative conformity and durable finishing supports long service intervals and helps maintain process capability. For bespoke questions on compatibility with existing fixtures or assembly jigs, Metav’s technical team can provide further guidance and matching recommendations. Contact Metav Werkzeuge for procurement and expert selection advice — call +49 2822 7131930 or email info@metav-werkzeuge.com to ensure the correct reference gauge for the application Technical data Article number: M313.150 GTIN: 4054469121154 Label: Setting ring 150 mm, DIN 2250, hardened gauge steel Facts Diameter: 150 mm Weight: 4.1 kg Tariff number: 90173000 EClass: 21170104 Special features Material: gauge steel, hardened and lapped Norms: DIN 2250; DIN 286; JS 3 Form: C Categories: Gauges; Measurement gauges FAQ What is the primary purpose of this setting ring? The setting ring 150 mm from Metav IndustryLine (SKU M313.150) serves as a precision reference for external-diameter checks and for setting measuring fixtures and mandrels in production and inspection environments. Which standards and tolerances does the gauge observe? The component is manufactured to DIN 2250 and DIN 286 requirements with a tolerance class of JS 3, making it suitable for precision fits and standardised inspection routines. What are the material and surface characteristics? The ring is made from hardened gauge steel and finished by lapping, providing a wear-resistant, smooth contact surface for repeatable measurements. How should the gauge be handled and stored? Handle the gauge with care to avoid knocks; store in a dry, clean location and protect the contact surfaces from contamination. Regular visual inspection ensures the lapped finish remains intact and effective. Can the ring be used for go/no‑go checks and fixture setup? Yes — its normative conformity and JS 3 tolerance make it suitable as a go/no‑go reference and as a master for setting up fixtures and calibration of external‑diameter measuring devices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Ceramic Gauge End Standard To DIN 861, Zirconia, HV1250 Wear-Resistant - Metav IndustryLine
Combining zirconia ceramic construction, HV 1250 hardness and DIN EN ISO 3650 accuracy, this end measure provides a stable, wear‑resistant reference for precision inspection and fixture set‑up. Order the Ceramic End Measure directly via Metav Werkzeuge or consult our specialists for application guidance. Ceramic End Measure 150 mm DIN 861 — zirconia, HV 1250 The Ceramic End Measure 150 mm DIN 861 is a compact, high‑stability reference gauge designed for precision dimensional checks and calibration tasks in workshops and laboratories. Zirconia ceramic, antimagnetic and wear‑resistant Accuracy per DIN EN ISO 3650 Hardness HV 1250, double steel hardness Cross‑section 35 × 9 mm, nominal 150 mm Stable reference values for repeatable inspection Made from zirconia, the gauge offers exceptional dimensional stability and a surface that resists wear under regular use. Compliance with DIN EN ISO 3650 ensures the component functions as a reliable reference in inspection routines, reducing uncertainty across repeated measurements. The extreme HV 1250 hardness means minimal abrasive loss compared with metallic gauges, which preserves nominal dimensions and supports long intervals between verification checks. Durability and mechanical stiffness where it matters The pronounced cross‑section of 35 × 9 mm provides sufficient stiffness for handling and minimises bending during placement, while the nominal length of 150 mm suits a wide range of workshop tasks. The wear‑resistant and antimagnetic properties keep the reference surface free from magnetic interference and surface degradation, translating directly into fewer rejected parts and lower rework rates when used as a production benchmark. Designed for integration into quality workflows Certified to the dimensional standards indicated and marked as an end measure to DIN 861, this gauge can be used as a master for routine checks, fixture set‑up and incoming inspection. Its consistent material behaviour across temperature and contact conditions supports traceable measurements and easier documentation in quality records. Specification sheets and application advice are available from Metav IndustryLine to aid incorporation into existing calibration procedures. Contact Metav Werkzeuge in Emmerich for specification sheets or to discuss how the Metav IndustryLine Ceramic End Measure (SKU M324.150) can secure traceable reference values for production and inspection Technical Data Article number: M324.150 Description: Ceramic End Measure 150 mm DIN 861 Manufacturer: Metav IndustryLine Facts Nominal length: 150 mm Cross‑section: 35 x 9 mm Hardness: HV 1250 Accuracy standard: DIN EN ISO 3650 Special features Material: zirconia ceramic Antimagnetic Wear‑resistant surface Compliance: DIN 861 FAQ What material is the gauge made from? The Ceramic End Measure 150 mm DIN 861 is manufactured from zirconia ceramic; the material is stainless, antimagnetic and designed for wear resistance. Which accuracy and standards apply to this reference? Accuracy is specified according to DIN EN ISO 3650 and the product is supplied as an end measure to DIN 861 for use in calibrated inspection environments. Is the gauge suitable for use near magnetic equipment? Yes, the antimagnetic properties of the zirconia material prevent magnetic interference during measurements. For which applications is this 150 mm end measure intended? The gauge is intended as a stable reference for workshop inspection, fixture alignment and laboratory calibration where a 150 mm nominal length is appropriate. How should the gauge be handled and stored? Handle the ceramic gauge with care to avoid impacts; store in a dry, dust‑free environment and keep protective packaging to prevent surface contamination. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Profile Gauge With 84mm Wire Length For Shape Transfer - Metav IndustryLine
Take advantage of the combination of precise contour capture, 84 mm galvanised wire pins, and a compact 150 mm span for reliable profile transfer in routine workshop tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Profile gauge M318.515 — 150 mm contour gauge with 84 mm galvanised wire pins (Metav IndustryLine) The Profile gauge M318.515 is a compact contour copying tool designed for accurate transfer of shapes and profiles across metalworking, joinery and general workshop applications. 150 mm overall profile length 84 mm galvanised wire pins for deep contours Weight 1.2 kg for stable handling Workshop-ready design for repeatable transfers Accurate shape capture that speeds up profile transfer The gauge is built to simplify the routine task of copying complex outlines: a 150 mm overall span combined with 84 mm galvanised wire pins allows the capture of both shallow and relatively deep contours without repeated repositioning. The array of closely spaced pins records the geometry as a discrete contour profile, enabling reliable profile transfer to templates, stock material or inspection gauges. This reduces iterative measuring steps and supports faster downstream processes, which is particularly valuable in production runs where consistency and throughput matter. Corrosion-resistant pins and durable handling for everyday use Pins are specified as needles made from galvanised wire, which provides enhanced resistance to surface corrosion compared with plain steel pins while retaining the necessary spring and formability for contour copying. The tool’s mass of 1.2 kg contributes to steadiness during measurement and transfer, reducing the chance of pin displacement when lifting the gauge from a template. Simple maintenance—occasional cleaning and light lubrication where pins interface—keeps the device operating smoothly and preserves repeatability across repeated cycles. Practical integration into workshop routines and quality checks As part of the Metav IndustryLine, this contour gauge supports routine shop-floor tasks, such as trimming, filing, or setting up workpieces where a physical template is preferred over digital scanning. The discrete-pin principle makes the gauge inherently robust and quick to use for small to medium-sized components; it is especially suitable where a tactile reference or immediate hand transfer is required. The combination of accurate contour capture and practical handling characteristics helps reduce setup time and aids consistent outcomes during manual operations. For direct procurement or technical clarification regarding the Metav IndustryLine profile gauge M318.515, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or telephone +49 2822 7131930. Technical Data Article number: M318.515 GTIN: 4054469129129 Manufacturer: Metav IndustryLine Facts Length: 150 mm Wire length: 84 mm Weight: 1.2 kg Customs tariff number: 90173000 Special features Needles made from galvanised wire Intended for contour copying and profile transfer Category: Measuring pins / Gauges FAQ What materials are the pins made from and how do they resist corrosion? The pins are made from galvanised wire, which offers an electroplated zinc coating that improves resistance to surface corrosion compared with untreated steel, making the Profile gauge M318.515 suitable for normal workshop environments. Which tasks is this profile gauge best suited for? This gauge is designed for contour copying and profile transfer in metalworking, joinery and general workshop tasks where a tactile template is required rather than a digital scan. How deep a contour can be captured with this gauge? With 84 mm wire pins, the gauge captures relatively deep contours within its 150 mm span, enabling the transfer of pronounced profiles without multiple repositionings. Does the gauge require special maintenance to remain accurate? Routine care—removing debris, a light wipe-down and occasional lubrication at pin interfaces—will maintain smooth operation and repeatability for the Profile gauge M318.515. Is the gauge suitable for repeated production use? Yes; the galvanised pins and stable mass (1.2 kg) make the tool appropriate for repeated workshop use, providing consistent profile copies for production and repair tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
155mm Setting Ring, Hardened Gauge Steel, Form C, DIN 2250/DIN 286 JS 3 - Metav IndustryLine
Robust 155 mm setting ring in hardened and lapped gauge steel provides a stable, wear‑resistant reference with DIN 2250 / DIN 286 JS 3 tolerance; benefit from repeatable measurements, long service life and straightforward integration into inspection workflows. Order this precision ring directly via Metav Werkzeuge or contact our consultants for specification advice. Setting ring M313.155 – 155 mm ring gauge, hardened gauge steel (DIN 2250) – Metav IndustryLine The setting ring 155 mm is a precision ring gauge for calibration, setting and reference measurements in production and metrology environments Hardened and lapped gauge steel surface Conforms to DIN 2250 and DIN 286 JS 3 155 mm nominal diameter, stable reference Form C profile for standard gauge applications Stable reference for workshop and laboratory The ring is manufactured from hardened gauge steel and delivered with a lapped running surface to ensure consistent contact and minimal wear. This construction results in a stable reference for setting gauges and validating measuring equipment, so repeatability is maintained over many cycles. The solid mass and balanced geometry help reduce thermal and handling influences, allowing dependable use in both toolrooms and calibration benches. DIN tolerances that reduce acceptance uncertainty Built to DIN 2250 and DIN 286 with a JS 3 tolerance class, the component supplies clearly defined dimensional limits for acceptance tests and setting procedures. These standards make the part suitable as a ring gauge for calibrating micrometers and for use as a master reference in go/no‑go checks. Clear standardisation reduces ambiguity during quality inspections and simplifies documentation in controlled production processes. Durable design and practical workshop benefits At approximately 5.15 kg the component demonstrates the mass and rigidity expected of industrial reference gauges, providing resistance to small disturbances during measurement. The Form C geometry matches common gauge fixtures and holders, enabling easy integration into existing setups. Supplied by Metav IndustryLine, the ring benefits from a European quality filter and logistical proximity that supports reliable supply and traceability for serial production and maintenance planning. For a traceable 155 mm reference ring from Metav IndustryLine and tailored application advice, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for specification guidance and ordering support Technical data SKU: M313.155 GTIN: 4054469121161 Article designation: Setting ring 155 mm, DIN 2250, hardened gauge steel Weight: 5.15 kg Data Nominal diameter: 155 mm Tariff number: 90173000 ECLASS: 21170104 Special features Material: gauge steel, hardened and lapped Standards: DIN 2250; DIN 286, JS 3 Profile: Form C Use: calibration, setting, reference measurements Brand: Metav IndustryLine FAQ What is the primary application of this ring gauge? The setting ring M313.155 is designed primarily for calibration and setting of measuring instruments, serving as a precise reference in production control and inspection tasks. Which standards and tolerance class apply to the ring? The ring complies with DIN 2250 and DIN 286 and is manufactured to a JS 3 tolerance class to ensure narrow acceptance limits and reproducible checks. Is the material suitable for regular workshop use? Yes. The gauge is made from hardened and lapped gauge steel, giving it wear resistance and the dimensional stability required for frequent use in workshops and calibration rooms. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Ceramic Gauge Ball (Si3N4) 0.003mm Accuracy, HV1400-1700 Hardness - Metav IndustryLine
A compact gauge sphere that combines Si3N4 ceramic construction, a 15 mm diameter and a verified 0.003 mm measurement accuracy delivers a durable, traceable reference for inspection and calibration. Order the item directly via Metav Werkzeuge or contact the consultants for application advice. Ceramic measuring ball (Si3N4), 15 mm — Precision gauge sphere, 0.003 mm accuracy (Metav IndustryLine) The ceramic measuring ball (Si3N4) is a high-stability reference sphere designed for precision gauges, inspection fixtures and calibration tasks in quality control environments. Si3N4 ceramic for thermal stability 0.003 mm measurement accuracy 15 mm diameter with 0.00008 mm tolerance Reliable reference accuracy for everyday inspection The gauge sphere offers a 0.003 mm nominal accuracy, making it suitable as a reference standard in routine inspection and comparative measurements. Manufactured from Si3N4 ceramic, the sphere combines intrinsic material hardness with dimensional stability, which helps maintain consistent contact geometry under repeated probing. The very low surface roughness (Ra 0.00001) supports repeatable tactile measurements and reduces scatter when used with stylus probes or comparator setups. As a compact reference, this sphere simplifies traceable checks on gauges and fixtures where sub‑0.01 mm performance is expected. Wear resistance and long-term stability reduce rework With a hardness in the HV1400–1700 range the sphere withstands typical probe contact and mechanical handling better than many metal alternatives. The tight diameter tolerance (0.00008 mm) preserves interchangeability between reference points and minimises the need for frequent replacement. These material and production attributes provide a predictable wear profile, which translates into lower inspection uncertainty and fewer interruptions for recalibration or component replacement in production monitoring routines. Practical integration into calibration and inspection workflows The 15 mm size offers a balance between handling convenience and probe contact area, making the sphere compatible with common gauge blocks, fixture sockets and automated probe heads. Its modest mass (approx. 0.08 kg) aids stable seating in holders while remaining easy to position manually. For metrology teams seeking an economical yet dependable reference, the sphere functions well as a bench standard or as part of a gauge set used for routine acceptance checks. Where traceability is required, the documented measurement capability and the measured surface parameters support integration into a documented quality process. Confidence from a trusted supply chain Sourcing this precision component from an established supplier reduces procurement risk. Metav’s positioning as a specialist in accessible precision instruments offers reassurance through consolidated logistic support and product availability for industry and workshops. The combination of measurable performance, material robustness and supplier reliability creates a practical proposition for shops and quality departments that value both repeatability and straightforward inventory management. Choose Metav IndustryLine gauge spheres for dependable reference performance — contact Metav Werkzeuge for specific application guidance and supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M318.445 GTIN: 4054469184425 Material: Keramik (Si3N4) Diameter: 15 mm Weight: 0.08 kg Facts Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Hardness: HV1400–1700 Surface roughness Ra: 0.00001 Special features Intended application: gauges / reference spheres for inspection Compact size for bench and fixture use High hardness and low surface roughness for wear resistance FAQ What accuracy can be expected from this ceramic gauge sphere? The ceramic measuring ball (Si3N4) M318.445 is specified with an accuracy of 0.003 mm, making it suitable for routine precision checks and comparative measurements in workshop and inspection environments. What material properties make Si3N4 suitable for reference spheres? Si3N4 ceramic combines high hardness (HV1400–1700) and excellent dimensional stability; these properties allow the sphere to maintain geometry and resist wear during repeated contact in calibration and inspection tasks. Is the 15 mm diameter suitable for common probe and fixture setups? Yes, the 15 mm diameter offers a practical compromise between handling and contact area; the M318.445 is compatible with standard gauge sockets and probe heads used in many metrology fixtures. How tight is the diameter control on this measuring ball? The sphere is produced to a diameter tolerance of 0.00008 mm, supporting interchangeability and reproducible contact geometry for accurate comparative checks. Can this sphere be used as a daily reference in a production environment? The combination of measured surface roughness (Ra 0.00001), high hardness and compact geometry makes this ceramic sphere well suited for regular inspection cycles and as a bench reference in quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Gap Gauge Wedge 1–15mm Range 0.1mm Graduation Stainless Tool Steel - Metav IndustryLine
Product data conflict: the product label specifies "stainless steel" while the material field lists "tool steel". This discrepancy creates uncertainty regarding the actual composition of the product, which may lead to confusion for customers and hinder the creation of an accurate and reliable product description. To ensure clarity and consistency, it is essential to address this inconsistency promptly. Please verify the material information by cross-referencing relevant documentation or consulting with the appropriate team. Resolving this issue will help maintain the integrity of the product data and ensure that customers receive accurate information about the product's material specifications.
15mm Universal Weld Gauge Depth Height Width Angle Measurement, Matt Chrome Finish, Supplied in Case - Metav IndustryLine
Benefit from a compact multi‑function gauge that combines 0–15 mm measuring range, matt chrome finish and rapid depth, height, width and angle checks for consistent weld quality. Order the gauge directly via Metav Werkzeuge or contact their consultants for tailored technical advice. Universal weld seam gauge 0–15 mm — compact multi‑function weld inspection gauge by Metav IndustryLine The Universal weld seam gauge 0–15 mm is a compact multi‑function gauge for quick checks on flat and corner welds in metal fabrication and routine workshop inspection Compact multi‑function weld gauge Measurement range 0–15 mm Matt chrome finish for corrosion resistance Suitable for flat and corner welds Fast, reliable checks for everyday weld inspection The compact design offers precision where rapid go/no‑go decisions are needed on the shop floor. Measuring depth, height, width and angle in one tool reduces changeovers and avoids measuring with several instruments, which shortens inspection times and lowers the risk of rework. The device’s clear, direct measuring surfaces facilitate immediate reading and help maintain consistent depth and angle control during repeated checks. Micro‑sized gauge benefits for small welds and assemblies With a maximum measuring range of 15 mm this instrument sits in the Micro category of gauges, designed for fine mechanical and small‑part work. The short jaws keep the instrument rigid, improving stiffness and thus measurement repeatability when inspecting narrow seams or confined corners. Its compact footprint supports one‑handed operation and fast positioning, which is especially valuable in benchwork and assembly tasks requiring frequent checks. Robust finish and practical workshop handling A matt chrome plating provides a corrosion‑resistant surface that withstands routine workshop use while remaining easy to clean. At approximately 0.4 kg, the tool balances solidity with portability, making it simple to carry between stations or include in an inspection kit. The combination of durable finish and modest weight supports long‑term use without cumbersome handling, contributing to reliable day‑to‑day performance. Built for workflow efficiency and clear results Combining multiple measuring functions into a single instrument improves process flow by eliminating tool swaps and simplifying documentation of weld parameters. The universal design permits quick verification of common seam dimensions across a range of tasks, supporting consistent quality control and faster decision‑making. For routine checks on flat and corner welds, this universal gauge offers a pragmatic balance of repeatability and usability. For practical shop guidance and supply details for the Metav IndustryLine universal weld seam gauge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and delivery information Technical data Article number: M201.162 GTIN: 4054469168425 ECLASS: 21170207 Facts Weight: 0.4 kg Measuring range: 0–15 mm Tariff number: 90173000 Special features Finish: matt chrome‑plated Functions: depth, height, width and angle measurement Category: Gauges / Measuring pins Brand: Metav IndustryLine FAQ How wide is the measuring range of the gauge? The measuring range is 0–15 mm, suitable for fine weld seam checks and small joint geometries. Can the gauge measure both flat and corner welds? Yes, the universal design supports measurements on flat welds and welds in corners for quick inspection. What finish does the tool have and why does it matter? The tool is matt chrome‑plated, which improves corrosion resistance and eases cleaning in workshop environments. Is the gauge suitable for handheld, one‑person operation? Its compact dimensions and balanced weight around 0.4 kg make it appropriate for one‑handed use and frequent spot checks. Which article number should be referenced when ordering or enquiring? Reference article number M201.162 or the GTIN 4054469168425 when requesting product information. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15–30mm Gap Gauge 1.2mm Thick, 0.1mm Graduation, Stainless Tool Steel - Metav IndustryLine
Take advantage of the compact 15–30 mm measuring range combined with a clear 0.1 mm graduation and a rigid 1.2 mm plate for reliable gap control in small assemblies; order this tool directly via Metav Werkzeuge or consult our specialists for application advice. Measuring Wedge M318.041 — 15–30 mm, 0.1 mm graduation (Metav IndustryLine) The Measuring Wedge M318.041 is a compact wedge gauge designed for precise gap and clearance checks in workshop inspection and assembly tasks. Measuring range 15–30 mm 0.1 mm graduation for clear readings 1.2 mm plate thickness for stability Compact wedge gauge, workshop-ready Precision where small gaps matter For tasks that demand concise, repeatable gap measurements, the measuring wedge offers a focused solution: a 15–30 mm measuring window with a 0.1 mm graduation provides straightforward numeric orientation for quality checks and setup work. Classified in the Mikro bracket (10–100 mm), this format combines reach with low flexing, which is essential when measuring fine components such as small housings, assemblies or jigs. The simple analogue scale gives an immediate readout, reducing the need for electronic systems where robustness and speed are priorities. The direct result is fewer setup iterations and faster process verification in production or maintenance routines. Reliable mechanical reading for workshop use The analogue scale, with its 0.1 mm resolution, suits standard workshop inspection and machine-shop quality control where clear, mechanical feedback is preferred over delicate electronics. The wedge’s form factor keeps contact forces consistent and the reading straightforward, which helps avoid interpretation errors during repetitive checks. Because the device is intentionally simple, it is well suited for shop-floor conditions: it tolerates quick handling, can be used without battery dependency and supports efficient operator workflows. This translates into a dependable measuring aid for everyday production tasks and incoming inspections. Built for repeatability and easy handling A plate thickness of 1.2 mm contributes to the wedge’s stiffness, improving repeatability when measuring narrow gaps. At approximately 0.1 kg, the tool remains lightweight and easy to manoeuvre, allowing single‑hand operation in confined spaces. The compact geometry reduces the risk of bending or misalignment during contact with mating parts, which in turn lowers systematic measurement error. For manufacturers and maintenance professionals, these attributes mean fewer re-measures, less downtime and smoother assembly checks — a practical improvement to routine quality workflows. Easily integrated into inspection routines The wedge functions as a rapid verification tool within a broader inspection setup: use it to confirm fit tolerances, check clearance after assembly or validate machining operations before final processing. Its compactness makes it suitable for bench testing and in-situ checks on fixtures and components. For traceable procurement and stock control, the item is listed under SKU M318.041 and is part of Metav IndustryLine’s workshop-oriented gauge range, which aims to simplify sourcing and ensure consistent availability for industrial and trade customers. For precise gap checks in small components, contact Metav Werkzeuge in Emmerich for tailored advice or request the Metav IndustryLine measuring wedge M318.041 through our specialists Technical data SKU: M318.041 GTIN: 4054469146737 eClass: 21170342 Tariff number: 90173000 Manufacturer: Metav IndustryLine Core measurements Measuring range: 15–30 mm Graduation / reading: 0.1 mm Plate thickness: 1.2 mm Weight: 0.1 kg Analogue reading: yes Features Compact wedge gauge design Suitable for gap and clearance checks Categories: gauge pins; gauges Workshop-ready, robust construction FAQ How accurate is the reading on this wedge? The wedge provides a mechanical graduation of 0.1 mm, giving clear, repeatable indications suitable for standard workshop control and assembly checks with the Metav IndustryLine wedge M318.041. Which tasks is the wedge best suited to? Ideal for gap, clearance and fit checks on small components, the wedge supports quick verification during setup, incoming inspection and routine maintenance. Is the instrument suitable for shop-floor use? Yes — the analogue design and compact form make the device resilient to everyday handling and appropriate for use at the workbench or directly on machines. How does the tool aid repeatability in measurements? The 1.2 mm plate thickness and compact geometry reduce flex and alignment error, improving repeatability for closely spaced or delicate parts when used in consistent measuring routines. Where can the wedge be ordered or inspected further? The measuring wedge is part of Metav IndustryLine (SKU M318.041); further product details and procurement assistance are available from Metav Werkzeuge’s product advisors. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15–30mm Tapered Bore Gauge, Cone 1:10, 0.1mm Graduation, Chrome‑Plated Steel Cone with Anodised Aluminium Handle - Metav IndustryLine
Take advantage of the combination of precise centring, a robust matt‑chrome cone and a clear 0.1 mm readout for fast, repeatable bore checks; order the gauge directly from Metav Werkzeuge or consult our metrology specialists if clarification is required. Metav IndustryLine Bore Gauge M318.047 — Tapered gauge, 15–30 mm, 1:10 taper, 0.1 mm readout Metav IndustryLine Bore Gauge M318.047 is a tapered inspection gauge for quick measurement of cylindrical bores in the 15–30 mm range, designed for routine workshop and incoming‑inspection tasks Tapered cone 1:10 for reliable centring Reading 0.1 mm for straightforward assessment Matt chrome cone and anodised aluminium handle Accurate centring and dependable range for routine inspection The tapered geometry with a 1:10 taper provides secure centring inside cylindrical bores, ensuring a stable contact condition over the measurement range 15–30 mm. This form reduces angular misalignment during insertion, which improves repeatability for comparative checks. The instrument is intended for shop‑floor inspection and simple go/no‑go evaluation where clear mechanical results are required rather than submicron laboratory measurement. The cone is produced from special steel, which contributes to wear resistance and maintains surface integrity over repeated use. Robust materials and ergonomic handling for everyday work Construction combines a matt chrome finished cone with an anodised aluminium handle, giving a balance of corrosion resistance and light weight. With an overall length of 250 mm and a cone length of 165 mm, the gauge is long enough to access common component bores while remaining easy to manoeuvre. The mass of approximately 0.63 kg delivers a reassuring hand feel without being fatiguing. These characteristics translate into fewer handling errors and a longer service life, so inspection routines stay efficient and predictable over time. Clear readout and practical application for faster decisions The instrument offers a 0.1 mm readout, which makes size classes and deviations immediately visible during routine checks. This resolution supports fast sorting and acceptance decisions on the production line, helping to reduce throughput delays caused by uncertain measurements. The tapered design coupled with the straightforward scale enables quick comparative checks across batches, simplifying process control and immediate corrective action where required. The gauge is a pragmatic tool for workshops that require reliable mechanical checks without investing in complex electronics. For tailored application advice or to procure the Metav IndustryLine M318.047 bore gauge, contact Metav Werkzeuge in Emmerich — our metrology team can advise on suitability for specific components and testing routines Technical Data Article number: M318.047 GTIN: 4054469163055 Weight: 0.63 kg Tariff number: 90173000 eClass: 21170208 Facts Measurement range: 15–30 mm Reading/resolution: 0.1 mm Cone length: 165 mm Overall length: 250 mm Special features Cone material: steel, matt chrome‑plated Handle: aluminium, anodised Taper: 1:10 Application: measuring cylindrical bores FAQ How precise is the gauge for workshop checks? The instrument provides a 0..1 mm readout suitable for routine inspection and comparative measurements within standard workshop tolerances. Which bore sizes can be measured with this gauge? Measurement capability covers cylindrical bores from 15 mm to 30 mm, using the tapered cone to secure centring across the range. What are the main materials and finishes? The cone is made from steel with a matt chrome finish and the handle is anodised aluminium, chosen for durability and corrosion resistance. Is a calibration certificate included with the product data provided? The product data does not specify an ISO 17025 calibration certificate; the published information should be checked if a specific certificate is required for quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 mm Ceramic Setting Ring 0.001 mm Accuracy, Stainless Antimagnetic Wear‑Resistant - Metav IndustryLine
Take advantage of zirconia construction and ±0.001 mm repeatability for reliable workshop setting tasks; precise, wear‑resistant performance helps reduce adjustment time and rework. Order directly via Metav Werkzeuge or contact the consultants for application advice. Ceramic setting ring 16 mm 0.001 mm (38x10) — Zirconia, HV 1250 hardness, ±0.001 mm accuracy (Metav IndustryLine) Ceramic setting ring 16 mm 0.001 mm (38x10) is a compact workshop‑grade setting gauge designed for high‑precision setting and reference tasks in metrology and toolrooms Zirconia ceramic, corrosion‑resistant and stable Accuracy ±0.001 mm for high repeatability Hardness HV 1250 reduces surface wear Non‑magnetic and workshop‑ready Precision where repeatability matters The ceramic setting ring delivers a clear rational advantage: ±0.001 mm accuracy combined with the high hardness of HV 1250 ensures that reference values remain stable over many cycles. For calibration and setting operations this means fewer verification steps and reduced downtime, since the material resists indentation and maintains dimensional integrity. The zirconia ceramic substrate offers low elastic deformation compared with many metals, so readings taken against the ring are more repeatable and less influenced by contact pressure. Durable material science for everyday workshop use Constructed from zirconia ceramic, the gauge is wear‑resistant, corrosion‑resistant and non‑magnetic, attributes that translate into long service life in mixed‑material environments. Hardness at HV 1250 places the ring well above typical tool steels in surface resistance, limiting abrasion from repeated contact with measuring anvils. This combination delivers reliable performance for routine setting tasks, lowering the frequency of replacement and stabilising quality control workflows. Practical benefits for metrology and tool preparation With compact external dimensions (38 x 10 mm) and a nominal diameter of 16 mm, the ring suits bench calibration of small micrometers and comparative setting of gauges in a busy workshop. The workshop‑oriented design balances handling convenience with metrological stability, supporting rapid setup without compromising accuracy. The non‑magnetic nature avoids interference in magnetic environments, while the corrosion‑resistant surface reduces sensitivity to humidity and contaminants, helping maintain traceable reference values. For reliable, long‑term reference choose the Metav IndustryLine ceramic setting ring — contact Metav Werkzeuge GmbH in Emmerich for tailored advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M313.K16 Name: Ceramic setting ring 16 mm (38x10) Manufacturer: Metav IndustryLine Core data Nominal diameter: 16 mm External dimensions: 38 x 10 mm Accuracy: ±0.001 mm Hardness: HV 1250 Materials & features Material: Zirconia ceramic Corrosion‑resistant Non‑magnetic Wear‑resistant Workshop version FAQ What accuracy can be expected from the setting ring? The setting ring offers an accuracy of ±0.001 mm, suitable for fine workshop calibration and reference checks. What material is the ring made from? The ring is manufactured from zirconia ceramic, providing high hardness (HV 1250), wear resistance and corrosion stability. Which tasks is this ring intended for? Designed for setting and comparative checks in toolrooms and metrology benches, the ring is ideal for calibrating small micrometers and establishing reference points for precision instruments. How does the hardness benefit everyday use? A hardness of HV 1250 reduces surface wear from repeated contact, maintaining dimensional stability and extending the useful life of the reference gauge. Is the ring suitable for use near magnetic machinery? Yes — the ring is non‑magnetic, avoiding magnetic interference during fine measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 mm Gauge Ball Pair Hardened Chrome Steel 0.003 mm Accuracy Tolerance Ø 0.00008 - Metav IndustryLine
Take advantage of the combination of high reproducibility, extreme surface quality and hardened construction for dependable reference measurements; order the set directly via Metav Werkzeuge or consult our specialists for application advice. Gauge ball pair M318.426 — Precision gauge balls, 16 mm, hardened chrome steel (Metav IndustryLine) A precision gauge ball pair for reference and inspection tasks in metrology and fixture setup, supplied as a matched set for repeatable diameter and roundness checks. Hardened chrome steel >HRC 62 Diameter 16 mm for compact reference work Diameter tolerance 0.00008 mm Supplied as a calibrated-quality pair Stable reference for accurate comparative measurements The gauge ball pair serves as a compact, highly reproducible reference for a wide range of inspection tasks, from spindle runout checks to fixture alignment. With a stated accuracy of 0.003 mm and an ultra-fine surface finish of 0.00001, the pair provides a consistent datum that reduces measurement scatter and simplifies repeatability in routine checks. The matched nature of the set ensures both spheres behave identically in comparative setups, enabling straightforward use in comparative gauging and quick verification cycles without complex setups. The compact 16 mm diameter combines handling ease with sufficient contact area for many common probe and touch-trigger checks. Wear‑resistant construction for long service life Manufactured from hardened chrome steel, the balls resist abrasive wear and maintain form over many handling cycles, which preserves measurement integrity and reduces replacement frequency. The material hardness of >HRC 62 increases resistance to indentation and surface damage during contact measurements, so calibration intervals can be optimised and downtime minimised. The tight diameter tolerance of 0.00008 mm supports high-precision referencing even after extended use. The modest mass and compact dimensions make the pair convenient to position within fixtures or to use as portable reference artefacts in inspection benches. Practical integration and trustworthiness in the workshop The set is supplied as a matched pair with manufacturer traceability (SKU M318.426), making it straightforward to document reference artefacts in quality records. Its consistent geometry and surface quality simplify the interpretation of probe signals and reduce uncertainty in comparative checks, supporting efficient quality control workflows. Metav IndustryLine products are distributed from Emmerich with a tested selection process; this combination of product reliability and European distribution supports predictable supply and a clear chain of custody for workshop standards. For dependable reference measurements choose the Metav IndustryLine gauge ball pair M318.426 and contact Metav Werkzeuge for tailored advice on integration and calibration options Technical data Article number: M318.426 GTIN: 4054469184142 Set: 2 pieces Facts Diameter: 16 mm Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness: 0.00001 Weight: 0.08 kg Special features Material: Chromed, hardened steel Hardness: >HRC 62 Supplied as matched pair Category: Gauges / Inspection FAQ What applications are suitable for these gauge balls? The gauge ball pair M318.426 from Metav IndustryLine is suitable as a compact reference for spindle runout checks, fixture alignment and comparative gauging where a reliable, small-diameter datum is required. How precise are the gauge balls for reference measurements? The matched pair delivers an accuracy of 0.003 mm with a diameter tolerance of 0.00008 mm, making the set appropriate for high-repeatability workshop inspections and comparative checks. What material and hardness do the balls have? The balls are made of hardened chrome steel and feature a hardness above HRC 62, providing wear resistance and long-term stability under repeated contact measurements. Is the pair traceable by article or SKU? Yes, the set is supplied as SKU M318.426 and includes the GTIN for clear identification in quality documentation and inventory records. How should the gauge balls be stored to maintain accuracy? Store the matched pair in a clean, dry environment and avoid mechanical shocks. Keeping the balls in a padded container or calibration box when not in use helps preserve the surface finish and dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of a precision gauge pin that combines workshop‑grade robustness, a compact Ø16.00 mm profile and a 50 mm measuring length to streamline end‑dimension checks and fixture set‑up. The high positional accuracy of ±0.002 mm ensures repeatable results in production and inspection tasks; order the item directly via Metav Werkzeuge or contact our advisors for application support. Test pin, single, Ø16.00 mm, length 50 mm — Metav IndustryLine Test pin, single, Ø16.00 mm, length 50 mm — a workshop‑grade gauge pin designed for fast end‑dimension verification and fixture alignment in metalworking and quality‑control processes Workshop‑grade construction Ø16.00 mm, length 50 mm gauge pin High positional accuracy ±0.002 mm Delivered in protective transport case Precise end‑dimension checks with consistent repeatability A compact gauge pin with a Ø16.00 mm diameter and 50 mm length provides a straightforward reference for end‑dimension measurements and pin‑based locating tasks. The stated positional accuracy of ±0.002 mm reduces measurement scatter, which translates into fewer adjustments on jigs and shorter set‑up times. Where repeatability matters — for batch checks, go/no‑go control or final inspection points — this solid pin keeps results consistent without complex fixturing. The slim design supports tight arrangements in fixtures while maintaining the stiffness required for reliable contact. Durable workshop construction for routine production use Machined from special steel, the pin is produced to withstand the frequent handling typical in workshop environments. The workshop‑grade finish balances surface quality with robustness, so gauge integrity is retained through repeated insertion and withdrawal cycles. The simple geometry aids quick visual inspection for wear; a precise form and surface finish support stable positioning in hardened bores and locating holes. For production areas seeking components that tolerate daily use without excessive maintenance, this pin offers a practical combination of durability and dimensional fidelity. Practical handling, storage and traceability for the shop floor Delivered in a protective case, the pin is ready for transport and organised storage between measurement tasks, reducing the risk of damage in transit. The compact form factor makes handling and exchange straightforward in busy inspection routines, and the clear SKU and GTIN labelling permit easy inventory control and traceability. The Metav IndustryLine designation signals integration into a broader range of standardised workshop gauges and accessories, facilitating matching with existing pin blocks and locating systems when required. Contact Metav Werkzeuge to discuss how the Metav IndustryLine test pin M323.G00 can improve measurement reliability on the production line; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.G00 GTIN: 4061905069215 Label: Test pin, single, 16.00 mm length 50 mm Core data Diameter: 16.00 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: special steel Delivered in protective transport case FAQ What applications is this gauge pin suitable for? The test pin is suitable for end‑dimension checks, fixture locating and production inspection tasks where a compact reference pin of Ø16.00 mm and 50 mm length is required. Is the pin supplied with a calibration certificate? No calibration certificate is listed for this item; the product is supplied as described without an included calibration certificate. What material is the pin made from and how does that affect wear? The pin is machined from special steel, providing a balance of surface integrity and resistance to routine workshop wear for dependable locating and measurement. Can this pin be used in hardened locating holes? Yes; the pin’s precise form and workshop‑grade finish make it suitable for insertion into hardened locating bores and for use in repetitive locating tasks. How is the item protected during transport and storage? Delivery includes a protective case for transport and interim storage, reducing the risk of damage between uses. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 mm Go/No-Go Plug Gauge DIN 2245 H7 Hardened Gauge Steel - Metav IndustryLine
Product data contains contradictions: the item is simultaneously flagged as both good and scrap, and weight values are inconsistent. These discrepancies make it difficult to ensure the accuracy and reliability of the information provided. It is essential to address these issues promptly to avoid potential errors in downstream processes. Please verify and correct the source data to resolve these contradictions and ensure consistency. Once the data has been reviewed and corrected, a product description can be generated with confidence. Accurate and consistent data is crucial for maintaining quality standards and supporting effective decision-making across related operations.
16 mm Limit Plug Gauge Go Side Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Combine hardened steel construction, DIN 7162 conformity and a wear allowance on the good side to achieve dependable, long-lived gauging; order the limit plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Limit plug gauge — hardened steel, DIN 7162, 16 mm (Filetta) The limit plug gauge is a precision check pin for fast go/no‑go assessment of hole diameters in inspection and production environments, designed to provide clear accept/reject decisions to DIN 7162. Hardened steel construction Complies with DIN 7162 Nominal size 16 mm Wear allowance on the go side Consistent pass/fail checks for series production A compact limit plug gauge gives a straightforward method for acceptance testing in repetitive manufacturing tasks. By combining a hardened steel body with adherence to DIN 7162, the gauge delivers reliable go/no‑go checks that minimise operator interpretation. This removes ambiguity from routine inspection and accelerates throughput, helping quality control to maintain cycle times without sacrificing test integrity. Durable design that reduces downtime The inclusion of a wear allowance on the good side extends service life and preserves the gauge’s functional limit before refurbishment is required. The hardened material resists surface damage during repeated use, contributing to stable repeatability across thousands of cycles. For workshop teams, that means fewer replacements and predictable maintenance intervals, supporting continuous production with minimal interruption. Clear traceability and workshop suitability Marked to the DIN standard and supplied under an industrial brand, this pin supports traceable inspection protocols in the shop‑floor context. The straightforward geometry suits handheld or fixture‑mounted checks and is compatible with common inspection workflows. The simple design also allows rapid cross‑checks against calibrated ring or plug gauge sets, aiding documentation of conformity where required. Practical advantages in daily inspection routines The compact nominal size simplifies handling and storage while still meeting the accuracy demands of typical mechanical manufacture. The gauge’s robust construction makes it practical for both bench inspections and use within assembly jigs. Where quick decisions are needed at the point of manufacture, the gauge provides an efficient, low‑complexity solution that integrates seamlessly into established quality procedures. For availability, batch options or technical advice on the Filetta limit plug gauge (MS911.220), contact Metav Werkzeuge for personalised support and supply information via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS911.220 Name: Limit plug gauge Material: gehärterter Stahl Standard: DIN 7162 Nominal size: 16 mm Special feature: Abnutzungsaufmaß der Gutseite Brand: Filetta Facts Nominal diameter: 16 mm Special features Hardened steel construction DIN 7162 conformity Wear allowance on the good side Intended for quick go/no‑go assessment FAQ What is the intended use of this gauge? The limit plug gauge is intended for rapid go/no‑go assessment of hole diameters in production and inspection environments; the Filetta gauge MS911.220 is designed for straightforward acceptance testing. Is the gauge compliant with recognised standards? Yes, the pin is manufactured to the requirements of DIN 7162, ensuring compatibility with standard inspection procedures. What does the wear allowance on the good side mean? The wear allowance on the good side provides extra usable material on the functional face, extending the interval before rework or replacement is necessary and helping to maintain reliable go results. Which materials suit inspection with this gauge? The gauge itself is made of hardened steel and is used to check holes in workpieces irrespective of the workpiece material; selection depends on the inspection requirements rather than the gauge material. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
16 mm Limit Plug Gauge Go, Wear Allowance On Master Side, DIN 7162 - Filetta
Take advantage of a hardened-steel, DIN 7162 compliant design with an integrated wear allowance on the good side to maintain reliable go/no-go checks throughout production. The robust Ø 16 mm construction supports repeatable limit inspection and reduces rework. Order the Filetta limit pin gauge directly via Metav Werkzeuge or ask our consultants for application advice. Filetta limit pin gauge – hardened steel, DIN 7162, Ø 16 mm The limit pin gauge is a precision checking pin for fast go/no-go verification of bores and fits in machine shops and inspection benches. Hardened steel construction Compliant with DIN 7162 Wear allowance on good side Consistent limit checks that keep production moving Designed for straightforward go/no-go inspection, this checking pin offers a compact method to control bore limits without complex setup. The hardened steel body preserves the gauge geometry under repeated use, which improves repeatability and reduces the need for corrective machining. Using a defined limit pin accelerates routine quality checks and shortens inspection cycles, delivering measurable efficiency gains on the shop floor. Built for durability and traceable performance A wear margin on the good side compensates for gradual abrasion, prolonging the service life while keeping functional checks reliable. Compliance with DIN 7162 places the component within a recognised framework for limit gauges, simplifying documentation and audit trails. The robust Ø 16 mm format balances stiffness and handling for frequent tactile checks, enabling quick decision-making at the bench without compromising measurement integrity. Simple handling, clear results for workshop use The geometry of the pin supports immediate tactile feedback in pass/fail inspection: the "go" condition should fit into the bore, while the "no-go" condition must be rejected. This binary outcome removes ambiguity from routine testing and helps maintain throughput. The gauge’s straightforward form factor makes it suitable for integration into existing inspection routines or as a portable verification tool carried between workstations. For specification support or to obtain the Filetta limit pin gauge Ø 16 mm (MS911.178), contact Metav Werkzeuge in Emmerich by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: MS911.178 Name: Limit pin gauge Material: hardened steel Standard: DIN 7162 Facts Diameter: 16 mm Category: gauges / test pins Special features Wear allowance on the good side Hardened material for durability FAQ What is the primary use of this limit pin gauge? The Filetta limit pin gauge (MS911.178) is used for fast go/no-go verification of bores and mating fits on production lines and inspection benches. Does the gauge comply with industry standards? Yes, the Filetta limit pin gauge is manufactured to comply with DIN 7162, ensuring it matches recognised requirements for limit gauges. How does the wear allowance affect long-term use? The built-in wear allowance on the good side extends usable life by compensating for gradual surface wear, keeping checks functionally reliable over time with less frequent replacement. What size is this checking pin and how is it handled? The checking pin is Ø 16 mm and is sized for easy tactile go/no-go inspections; its hardened construction supports repeatable handling in workshop environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
16 mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS 3 - Metav IndustryLine
Take advantage of the 16 mm setting ring's combination of traceable standards compliance, robust hardened and lapped gauge steel, and compact Form C geometry to secure repeatable gauge setting and master checks in the inspection area; order the ring directly via Metav Werkzeuge or consult our specialists for application advice. M313.016 Setting ring gauge — 16 mm, Form C (Metav IndustryLine) The M313.016 is a precision 16 mm setting ring designed for setting and verifying dimensional masters in toolrooms and inspection benches, compliant with DIN 2250 and DIN 286. Form C setting ring 16 mm nominal diameter Hardened and lapped gauge steel DIN 2250 / DIN 286, tolerance JS 3 Consistent calibration and conformity for inspection tasks The compact Form C construction provides a stable reference for setting internal and external measuring tools, reducing setup time in repetitive workflows. Manufactured from hardened and lapped gauge steel, the ring offers a wear-resistant contact surface that preserves the nominal dimension and minimises drift during routine use. Compliance with DIN 2250 and DIN 286, together with the specified JS 3 tolerance class, ensures that the component serves as a verifiable master for bench checks, contributing to a reproducible quality loop and supporting documented inspection procedures. Robust workmanship that makes everyday handling reliable The short, stout geometry of this gauge yields a favourable stiffness-to-size ratio, which simplifies handling and stabilises positioning during gauge setting operations. The lapped finish provides low-friction contact and protects measuring faces from premature abrasion, extending service intervals and lowering life-cycle intervention. This reliability translates into fewer recalibrations and less machine downtime, an economically sensible choice for busy workshops and inspection labs that require fast, repeatable setup without sacrificing traceability. Practical use cases and integration into quality routines As a dedicated setting ring, the item is suited for establishing reference dimensions for comparators, bench micrometers, and setting fixtures. Its compact size and clear standard compliance make it suitable as a portable master for mobile inspection tasks as well as a fixed reference in a calibration cabinet. The element supports standardised acceptance criteria and can be documented in inspection records, helping to fulfil internal quality audits and component acceptance checks with confidence. The robust material and finish also make the ring appropriate for regular shop-floor use where repeatability and quick verification are priorities. For reliable gauge setting backed by Metav IndustryLine quality, contact Metav Werkzeuge to discuss suitability for specific measurement tasks or request application guidance directly from our technical team Technical data SKU: M313.016 GTIN: 4054469120546 ECLASS: 21170104 Customs tariff number: 90173000 Facts Diameter: 16 mm Standards: DIN 2250; DIN 286 Tolerance class: JS 3 Category path: Messgeräte › Lehren Special features Form C geometry Material: gauge steel, hardened and lapped Intended use: setting and verification of dimensional masters FAQ What is the primary use of this setting ring? The M313.016 setting ring from Metav IndustryLine is used as a precision master for establishing and verifying reference dimensions on measuring equipment and fixtures. Which standards does the ring conform to? This setting ring conforms to DIN 2250 and DIN 286, with a tolerance class of JS 3 to support reproducible inspection routines. Is the material suitable for routine shop-floor use? Yes, the ring is made of hardened and lapped gauge steel, which provides wear resistance and low-friction contact suitable for regular verification tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.01mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Combining a workshop‑grade construction, a precise diameter of 16.01 mm and an accuracy of ±0.002 mm, this single gauge pin delivers repeatable end‑measure checks for micro components and tight fits. Order the pin directly via Metav Werkzeuge or consult our specialists for integration and measurement planning. Gauge pin, single — 16.01 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single, 16.01 mm, length 50 mm is a workshop‑grade test pin designed for fast fit verification and end‑measure control in precision production and inspection. High accuracy ±0.002 mm Diameter 16.01 mm, length 50 mm Special steel construction Workshop‑grade finish for durability Dependable precision for micro components This test pin is engineered for applications that demand tight tolerances and repeatable results. Classified in the micro range (10–100 mm), it suits fine mechanical tasks where short, stiff gauges reduce bending and measurement uncertainty. The ±0.002 mm specification ensures that dimensional checks and clearance tests remain consistent across repeated cycles, supporting reliable quality control and fewer downstream rejects. The combination of small form factor and high repeatability makes it suitable for jigs, fixtures and fine assembly lines. Robust construction for continuous workshop use Made from special steel and finished for workshop environments, the pin resists wear and preserves its measuring surface under frequent insertion. The construction supports stable seating in bores and gauges, reducing micro‑movement during inspection and helping maintain batch‑to‑batch consistency. The compact design also eases handling and positioning, enabling technicians to perform quick verification tasks with minimal setup time while protecting mating parts from scoring or deformation. Simple integration into inspection and production routines The single‑piece configuration is intended for direct use in end‑measure and fit verification workflows, offering a straightforward means to check hole diameters, clearances and assembly fits. As a standardised reference element, it complements plug gauge sets and optical inspection tools, speeding up sampling and reducing measurement variability. Where traceability and repeatable checks are required, this workshop version supports efficient processes and clearer pass/fail decisions on the shop floor. Contact Metav Werkzeuge to discuss how the Metav IndustryLine gauge pin can be integrated into existing inspection routines; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.G01 GTIN: 4061905069222 Category: Gauge pin (Messstifte) Brand: Metav IndustryLine Facts Diameter: 16.01 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version finish Intended for end‑measure and fit verification Single pin delivery FAQ What tolerance does this gauge pin provide? The gauge pin, single, 16.01 mm, length 50 mm is specified with an accuracy of ±0.002 mm for tight, repeatable checks. Which material is used for the pin? The pin is manufactured from special steel and finished for workshop use to ensure wear resistance and stable seating. What types of inspection tasks suit this pin? Suitable tasks include end‑measure checks, fit verification, quick bore sampling and assembly clearance tests in micro component production. Is the pin supplied individually or as part of a set? This item is supplied as a single gauge pin for flexible use alongside existing sets or as a standalone reference tool. How does the workshop version influence handling and durability? The workshop finish increases surface robustness for frequent insertion cycles and reduces surface damage to mating parts, supporting long service life and consistent measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.02mm Gauge Pin, Workshop Version, 50mm Length, Special Steel - Metav IndustryLine
Take advantage of a workshop-grade testing solution that combines high repeatability, compact dimensions and robust material selection for reliable end-measure checks; order directly via Metav Werkzeuge or request technical guidance from our consultants for seamless integration into existing inspection routines. M323.G02 Gauge Pin — Ø 16.02 mm, Length 50 mm (Metav IndustryLine) The M323.G02 is a single workshop-grade gauge pin designed for precise end-measure verification and fixture checking in production and inspection environments Workshop-grade execution for daily use Diameter 16.02 mm for end-measure checks Tight tolerance ±0.002 mm for reproducible results Delivered in a protective case for transport Consistent reference for end-measure verifications A compact, single-piece gauge pin that serves as a reliable reference for end-of-line and in-process checks. With a nominal diameter of 16.02 mm and a length of 50 mm, the component provides a stable datum for fixture alignment and plug-type inspections. The specified ±0.002 mm tolerance supports high-precision comparisons and reduces uncertainty in go/no-go assessments. Constructed from special steel, the pin resists deformation under standard workshop handling, helping to preserve dimensional integrity over repeated insertions. Lower reject rates through reproducible inspection Integrating this precision pin into a routine inspection sequence increases throughput by shortening verification cycles and reducing secondary checks. The smooth, hardened surface minimises fretting and wear against mating bores, which contributes to long-term dimensional stability. Supplied in a protective case, the item stays transport-safe and ready for immediate use on the shop floor or in a measuring bench, while its compact mass (approx. 0.15 kg) makes manual handling straightforward and safe. Proven supply chain and workshop suitability Metav IndustryLine positions this test pin as a dependable workshop tool: robust material choice and exacting manufacturing tolerances make it suitable for fixture set-up, end-measure audits and calibration routines where repeatability matters. The product is traceable via GTIN and shipped from the Metav distribution centre in Emmerich, backed by the company's broad inventory and established logistics. For purchasers seeking consistent measurement references, this gauge pin offers a pragmatic balance of precision, durability and workshop practicality. Contact Metav Werkzeuge for expert advice on integrating the M323.G02 gauge pin into inspection jigs or fixture setups and to arrange supply from the Emmerich distribution centre Technical Data Article number: M323.G02 GTIN: 4061905069239 Manufacturer: Metav IndustryLine Facts Diameter: 16.02 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop execution Material: special steel Delivered in a protective case Category: gauge pins / test pins FAQ What is the intended application of this gauge pin? The M323.G02 gauge pin from Metav IndustryLine is intended for end-measure verification, fixture alignment and plug-type inspection tasks in workshop and inspection settings. What level of precision does the pin offer? Manufactured to a tolerance of ±0.002 mm, the M323.G02 supports high-repeatability checks and is suitable where tight dimensional control is required. Is the gauge pin suitable for use with assembly fixtures and jigs? Yes, the robust construction and compact dimensions of the M323.G02 make it well suited for fixture set-up and routine verification in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.03 mm Gauge Pin 50 mm Length Workshop Version - Metav IndustryLine
Combining ±0.002 mm repeatability, a special-steel construction and secure delivery in a transport case ensures reliable end-measurement performance on the shop floor; order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin, single, Ø 16.03 mm – 50 mm length (Metav IndustryLine) The Test pin, single, 16.03 mm diameter, 50 mm length is a workshop-grade precision pin engineered for end-measurements, fixture setting and reference checking in industrial metrology. Workshop version for daily use Diameter precision 16.03 mm for end measurements Accuracy ±0.002 mm for reproducible results Delivered in a transport case for secure handling Consistent, measurable precision for production control The pin delivers high repeatability with a specified deviation of ±0.002 mm, making it suitable where tight tolerances are essential. This level of precision minimises rework and inspection time by providing a stable reference for Go/No‑Go checks, fixture calibration and comparison measurements. The stated tolerance reflects manufacturing control and supports traceable measurement routines; operators can therefore rely on consistent outcomes when integrating the pin into routine quality checks or assembly set‑ups. Durable design tuned to the workshop environment Constructed from special steel, the component resists wear under regular use while maintaining its measuring geometry. The 50 mm length and robust shaft profile suit insertion into gauges, bores and fixtures without excessive deformation, so mechanical stability is retained during handling. The workshop configuration prioritises practical resilience: surfaces are finished to preserve contact quality and the mass of 0.15 kg aids stable placement during measurement tasks. Practical handling and transport for efficient workflows Delivered in a protective transport case, the pin is ready for secure storage and safe transfer between workstations or inspection benches. The compact format reduces downtime by keeping the reference standard protected and immediately accessible. Traceability is supported by clear identification: SKU M323.G03 and GTIN 4061905069246 link the component to order, stock and inspection records, simplifying replacement planning and inventory control across production cycles. Secure the Metav IndustryLine test pin M323.G03 via Metav Werkzeuge for assured measurement reproducibility and protected transport, or contact our advisers for tailored application guidance Technical data Article number: M323.G03 GTIN: 4061905069246 Manufacturer: Metav IndustryLine Facts Diameter: 16.03 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: special steel Workshop execution Delivered in transport case SKU: M323.G03 FAQ What is the intended use of this test pin? This test pin from Metav IndustryLine is intended for end-measurements, fixture setting and reference checks in workshop and production environments. How precise is the measuring pin and what does the tolerance mean? The pin is manufactured to a tolerance of ±0.002 mm; this indicates the maximum deviation expected from the nominal diameter and underpins reproducible measurement results with minimal scatter. Is the test pin supplied ready for storage and transport? Yes, the item is supplied in a protective transport case to preserve the contact surfaces during handling and transit. Which material is used for the pin and why is that important? The pin is made from special steel, offering wear resistance and stable geometry under repeated use, which helps maintain measurement integrity over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.04mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of consistent measurement quality and workshop-ready durability—the 50 mm length and a diameter tolerance of ±0.002 mm ensure reliable end‑dimension checks. Delivered with practical transport protection, order the gauge pin directly via Metav Werkzeuge or contact their consultants for specification advice. Gauge pin M323.G04 — single precision checking pin, 16.04 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.G04 is a single precision checking pin designed for end‑dimension verification in workshop inspection and production control. Precision tolerance ±0.002 mm Diameter 16.04 mm Length 50 mm Workshop‑grade special steel Consistent measurement for production control A compact inspection pin like this provides repeatable end‑dimension checks where small variances can lead to costly rework. The declared tolerance of ±0.002 mm positions the item in the high‑precision bracket for workshop gauging; this means it is suitable for close‑tolerance inspections and for use as a reference in assembly jigs and checking fixtures. The nominal diameter of 16.04 mm corresponds to standard nominal fits, facilitating fast go/no‑go assessments and reducing measurement uncertainty during routine quality control. Built for robust workshop use Constructed from special steel in a workshop version finish, the pin resists everyday handling and retains its geometry under typical bench use. The 50 mm shank provides secure seating in holders and manual gauges, while the modest weight supports straightforward handling. Delivery in a protective transport case keeps the surface free from incidental knocks and debris, prolonging service life and preserving the calibration state of the artefact for longer periods between checks. Easy integration into inspection routines Designed as a single checking element, this precision pin simplifies inventory and replacement logic for inspection benches. Clear identification via SKU and GTIN eases procurement and traceability in quality documentation. Using a dedicated gauge pin shortens setup times for repetitive checks and supports a predictable inspection flow, which in turn reduces downtime, minimises scrap and contributes to measurable efficiency gains in production. Contact Metav Werkzeuge for availability and delivery from Emmerich—reference M323.G04 for ordering and specification support Technical data Article number: M323.G04 GTIN: 4061905069253 Manufacturer: Metav IndustryLine Facts Diameter: 16.04 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Delivered in a transport case for protection Single gauge pin for end‑dimension checking FAQ What tolerance can be expected from this checking pin? The gauge pin M323.G04 is specified with a tolerance of ±0.002 mm, making it suitable for high‑precision workshop checks and close‑tolerance inspections. Is the pin supplied ready for storage and transport? Yes, the M323.G04 is supplied in a protective transport case to prevent damage during handling and storage. For which tasks is this gauge pin intended? The pin is intended for end‑dimension verification, go/no‑go checks and use as a reference element in jigs and fixtures within workshop inspection routines. Which material is used for the pin and what does it mean in practice? Made from special steel, the M323.G04 balances surface hardness and toughness for routine workshop use, offering durability while maintaining measurement accuracy. How can the product be ordered or referenced in documentation? Order using the article number M323.G04 or the GTIN 4061905069253; both identifiers ensure correct procurement and traceability in quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com