Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
16.32 mm Gauge Pin, Workshop Version, Length 50 mm - Metav IndustryLine
Take advantage of precision metrology and robust workshop handling: the combination of ±0.002 mm dimensional accuracy, a Ø 16.32 mm measuring diameter and a compact 50 mm working length ensures reliable end‑dimension verification in production control. Order the inspection pin directly via Metav Werkzeuge or ask their consultants for application advice. Inspection pin M323.G32 (Ø 16.32 mm, 50 mm length) — Metav IndustryLine The inspection pin M323.G32 is a single‑piece gauging pin designed for precise end‑dimension checks and go/no‑go verification in workshop and inspection environments. High dimensional accuracy ±0.002 mm Diameter 16.32 mm, length 50 mm Made from special steel Delivered in a protective transport box Consistent measurement where it matters most This inspection pin is engineered for consistent dimensional control: the stated ±0.002 mm tolerance supports fine acceptance criteria in routine inspection tasks and sampling checks. By using a cylindrical reference with a stable shank and defined tip geometry, the component reduces variability introduced by handling and fixturing. For users accustomed to plug gauges and gauging pins, this item functions as a reliable reference for end‑diameter assessment and quick pass/fail testing, providing a straightforward, measurable contribution to process stability. Robust material and workshop suitability Constructed from special steel, the pin offers wear resistance and dimensional stability under regular use on the shop floor. The compact 50 mm length and balanced mass contribute to secure manual handling and rapid alignment in fixtures; the item’s modest weight facilitates quick swapping between setups. Packaging in a protective transport box ensures safe delivery and reduces the risk of accidental nicks during transit, preserving the measuring face and maintaining repeatability over prolonged service intervals. Practical applications and integration into inspection workflows Typical uses include end‑dimension verification, check‑fitting into bores, reference measurement during assembly control and template set‑up for pneumatic or optical gauging systems. The pin complements handheld gauges, bench comparators and coordinate measuring preparations where a defined cylindrical reference is required. When incorporated into inspection routines, the pin enhances repeatability and shortens decision time for quality checks, supporting faster throughput without compromising on measurement confidence. Why this choice supports procurement and quality goals Selecting a workshop‑grade gauging pin from the Metav IndustryLine aligns pragmatic purchasing with dependable performance: the item is intended to integrate into standard inspection kits and spare‑part inventories, while its clear technical parameters simplify inventory management and traceability. For quality teams seeking measurable improvements in first‑article control and routine acceptance testing, this pin represents a focused tool delivering immediate benefits to inspection consistency and production uptime. For a tailored recommendation and rapid supply from Metav Werkzeuge, request the Metav IndustryLine inspection pin M323.G32 today — technical advice and ordering assistance are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.G32 GTIN: 4061905071065 Manufacturer: Metav IndustryLine Facts Diameter: 16.32 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Delivered in a protective transport box FAQ What is the declared tolerance of the inspection pin? The inspection pin M323.G32 is specified with a dimensional accuracy of ±0.002 mm. Which material is used for the pin? The pin is made from special steel, selected for wear resistance and dimensional stability in workshop use. Is the pin suitable for end‑dimension verification on production parts? Yes. The M323.G32 gauging pin is intended for end‑dimension checks, go/no‑go testing and quick reference measurements in production and inspection workflows. How is the item delivered to ensure safe handling? The inspection pin is supplied in a protective transport box to safeguard the measuring faces during transport and storage. Can this pin be used as a replacement in existing gauge sets? The pin’s clear diameter and length specifications make it suitable for integration into existing gauge sets and inspection kits where a 16.32 mm reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.33mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
The compact, workshop-grade pin gauge with a 16.33 mm diameter and 50 mm length combines high dimensional reliability and robust construction; the ±0.002 mm tolerance supports precise end-dimension checks while the special-steel construction ensures durability in daily shop use. Order via Metav Werkzeuge or consult our specialists for delivery and availability. Pin gauge, single — 16.33 mm diameter, 50 mm length (Metav IndustryLine) A Pin gauge, single, 16.33 mm designed for precise end-dimension verification and routine inspection tasks in workshop and small-series production environments. Workshop-grade construction for robust use Diameter 16.33 mm with 50 mm effective length Precision tolerance ±0.002 mm Supplied in a protective transport case for security Accuracy that secures production tolerances The instrument is manufactured for end-dimension verification where repeatability matters. With a declared tolerance of ±0.002 mm, the pin gauge offers a level of precision that supports strict quality-control routines and reduces rework. This tolerance, combined with the compact design, is particularly suitable for fine measurement tasks typically grouped in the micro category (measurement range up to 100 mm), so small components and precision fits can be checked reliably. The small form factor also minimises lever action and contributes to consistent readings in repetitive inspection work. Built for the workshop — resilient and practical Produced in a workshop-grade configuration and made from special steel, this gauge is aimed at everyday use in production and maintenance contexts rather than only reference-laboratory conditions. The 50 mm length and solid construction balance stiffness and handling, helping to avoid bending under normal use. For safe storage and transport the item is supplied in a protective transport case, which reduces the risk of impact damage and preserves the measuring surface between uses. The robust finish and geometry mean fewer service interventions and steady performance across many inspection cycles. Practical applications and integration into inspection workflows This single gauge pin is suited to routine go/no-go checks, comparative fits and spot verification of end dimensions on shafts, bores and assembled parts. Its compact diameter of 16.33 mm and short length make it easy to handle on benches or in jig stations, and it integrates simply into visual and tactile inspection steps. The robust tolerance supports efficient process control: fewer false rejects, clearer decision thresholds and more predictable assembly outcomes. For purchasers the association with Metav IndustryLine ensures access to a broad range of precision tools from a supplier that acts as a quality filter for the European market. For workshop precision and dependable supply choose the Metav IndustryLine pin gauge and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm stock and shipping options. Technical Data SKU: M323.G33 GTIN: 4061905071072 Label: Prüfstift, einzeln, 16,33 mm Länge 50 mm Facts Diameter: 16.33 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: special steel Supplied in a protective transport case Intended for end-dimension verification FAQ What accuracy can be expected from this pin gauge? The pin gauge is specified with an accuracy of ±0.002 mm, which makes it suitable for precise end-dimension checks in workshop and inspection applications. Is this gauge suitable for regular workshop use and transport? Yes. The workshop-grade configuration and special steel construction are designed for regular use, and the item is supplied in a protective transport case to reduce handling damage. Which measurement tasks is the gauge optimised for? The gauge is optimised for end-dimension verification, go/no-go checks and fit examinations on shafts, bores and assembled components where a 16.33 mm diameter and a 50 mm length meet the inspection requirement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.34mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of tight dimensional control and workshop durability for reliable end‑dimension checks; order the part directly via Metav Werkzeuge or consult our technical advisors for integration advice. Gauge pin, single — 16.34 mm Ø, Length 50 mm (Metav IndustryLine) A gauge pin designed for precise end‑dimension verification and inspection tasks in workshop and production environments, presented as a single, precision‑ground measuring element. Workshop version, hardened special steel Diameter 16.34 mm, precision ±0.002 mm Length 50 mm, precision‑ground measuring end Reduce rejects with measurable precision High repeatability in inspection begins with a stable reference component. The supplied pin is manufactured from special steel and finished to a tolerance of ±0.002 mm, which ensures consistent pass/fail decisions during routine checks. By using a defined 16.34 mm measuring diameter and a 50 mm length, the component provides a compact yet stiff reference that reduces measurement variability and shortens inspection cycles. The precision class indicated supports quality control in small‑batch production and serial testing alike. Built for everyday workshop use Robustness and ease of handling are essential in a busy shop floor. The workshop version construction combines durable material selection with a precision ground measuring end that resists wear from repeated seating or probing. Its moderate length keeps the pin rigid under normal use, preventing unnecessary deflection and maintaining accuracy across repeated insertions. The result is a reliable reference that integrates smoothly into fixture setups or handheld inspection routines without special handling. Clear functional advantages for inspection workflows A single, dedicated measuring element simplifies traceability and tool management. The compact format supports quick substitution in gauges and fixtures and enables straightforward calibration management. With the compact mass and finish, the pin is suitable for end‑dimension verification, go/no‑go checks and use as a plug reference in assembly controls. Specification clarity—diameter, length and tolerance—helps procurement and quality teams align inspection procedures and document acceptance criteria efficiently. Contact Metav Werkzeuge in Emmerich to specify the 16.34 mm gauge pin (M323.G34) for your inspection setup or to arrange supply directly from Metav Werkzeuge. Technical data Article number: M323.G34 GTIN: 4061905071089 Material: Special steel Weight: 0.15 kg Diameter: 16.34 mm Length: 50 mm Tolerance: ±0.002 mm Numbers / core technical data Diameter: 16.34 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop version Precision‑ground measuring end Single gauge pin Precision class: ±0.002 mm FAQ What inspection tasks is this pin suited for? The gauge pin M323.G34 from Metav IndustryLine is intended for end‑dimension verification, go/no‑go checks and use as a plug reference in production inspection. What tolerance and accuracy are available? The pin is finished to a tolerance of ±0.002 mm, providing the dimensional control required for tight inspection criteria. What material is used for the measuring surface? The measuring element is made of special steel with a precision‑ground end to ensure wear resistance and stable contact geometry. Can this pin be used in fixture and gauge assemblies? Yes—its 50 mm length and rigid design make it suitable for integration into fixtures and handheld gauges where a compact, accurate reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.35mm Gauge Pin Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop design for reliable inspection routines; the accuracy of ±0.002 mm and the 16.35 mm diameter ensure consistent checks on mating bores. Order the test pin directly via Metav Werkzeuge or contact the consultants for application advice. Test pin M323.G35 — single gauge pin, Ø 16.35 mm, length 50 mm (Metav IndustryLine) Test pin M323.G35 is a compact single gauge pin designed for dimensional inspection and plug-gauge verification in workshop and production environments. Workshop version for robust use Diameter 16.35 mm for precise fits Tolerance ±0.002 mm for high repeatability Length 50 mm for compact inspection tools Accurate checks that speed up inspection decisions The M323.G35 serves as a dedicated gauge pin for quick verification of hole diameters where repeatable results are vital. With a declared tolerance of ±0.002 mm, the pin provides a measurable advantage in pass/fail decisions and reduces downstream rework by catching deviations early. The combination of a controlled diameter of 16.35 mm and a compact 50 mm length keeps handling simple while maintaining the contact geometry required for reliable seating in bores and fixtures. In practice, this translates to fewer measurement cycles and clearer go/no‑go outcomes during high-throughput checks. Built to withstand workshop conditions and frequent handling Specified as a workshop version, this inspection pin is finished from special steel to tolerate repeated use in industrial environments. The material choice balances wear resistance with dimensional stability so that the pin retains form under mechanical stress and routine cleaning. The deliberate design reduces the risk of edge damage and preserves the bearing surfaces that determine fit. When integrated into inspection benches or go/no‑go fixtures, the robust construction enhances repeatability across shift changes and different operators, contributing to consistent quality control in manufacturing. Simple integration into quality routines and traceability The pin's straightforward geometry makes it suitable for use in a wide range of fixtures, handheld checks and verification benches where a single reference diameter is required. Its compact size supports easy storage and fast exchange between control stations. Identification via the SKU M323.G35 and the GTIN facilitates stock control and traceability in quality records. For workshops seeking to streamline inspection, the pin functions as a reliable reference tool that complements calipers and plug‑gauge sets, supporting efficient decision-making without complex setup. For dependable workshop inspections choose the Metav IndustryLine test pin M323.G35 and contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and technical guidance Technical data Article number: M323.G35 GTIN: 4061905071096 Brand: Metav IndustryLine Measurements Diameter: 16.35 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Design: workshop version Category: gauge / test pin FAQ What is the declared accuracy of the test pin? The declared accuracy for the M323.G35 test pin is ±0.002 mm, ensuring tight repeatability for dimensional checks. Is the M323.G35 suitable for use in plug‑gauge fixtures? Yes, the M323.G35 gauge pin is suitable for plug‑gauge and go/no‑go fixtures where a stable reference diameter of 16.35 mm is required. Which material is used for the pin and how does it affect wear? The pin is manufactured from special steel, chosen to provide good wear resistance and dimensional stability under regular workshop use. How is the product identified for stock and traceability? Identification is available via the SKU M323.G35 and GTIN 4061905071096 for integration into inventory and quality documentation. Can this pin replace a caliper for diameter checks? The pin functions as a direct reference for specific diameters; it complements calipers and gauges but does not replace the broader measurement range of a caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.36mm Test Pin Length 50mm Workshop Version - Metav IndustryLine
Combine high repeatability with compact dimensions: the ±0.002 mm positional accuracy together with special steel construction ensures reliable end‑dimension checks in workshop environments; order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification support. Gauge pin M323.G36 – 16.36 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.G36 engineered for workshop use to perform precise end‑dimension verification and component gauging of small parts. Workshop-grade construction Diameter 16.36 mm, length 50 mm Accuracy ±0.002 mm Delivered in transport box Precision that supports reliable go/no‑go decisions The compact workshop version offers a small footprint while delivering industrial repeatability. With a stated accuracy of ±0.002 mm, this gauge pin is suited to tasks where tight tolerances matter: inspection of mating holes, pin fits and end‑dimension controls. The specified tolerance corresponds to the finer end of mechanical gauge performance and supports consistent measurement outcomes when integrated into routine inspection procedures. The solid construction minimises bending and wear, contributing to stable results over repeated use. Built for small parts and tight access Designed within the micro range of measuring tools, the geometric proportions of this pin balance reach and stiffness for small components. A diameter of 16.36 mm combined with a 50 mm overall length gives the pin sufficient engagement depth for many end‑dimension checks while remaining easy to handle in confined fixtures. The use of special steel provides surface hardness and resistance to minor impact and abrasion, which in turn keeps the gauge geometry true over longer service intervals. These attributes make the part well suited to precision assembly, toolroom checks and accessory gauging stations. Practicality and workshop readiness The M323.G36 is delivered in a transport box, protecting the measuring face during handling and storage and simplifying logistics for workshop environments. The compact mass and balanced geometry allow single‑handed placement in many setups; the construction is described as workshop-grade, reflecting a focus on robust day‑to‑day use rather than delicate laboratory handling. Traceable identifiers such as the SKU and GTIN are recorded for inventory and quality processes, supporting orderly stock control and part traceability within production and inspection records. Contact Metav Werkzeuge today for a tailored quotation or technical clarification on the Metav IndustryLine gauge pin M323.G36 and benefit from prompt delivery from Emmerich. Technical data Article number: M323.G36 GTIN: 4061905071102 Manufacturer: Metav IndustryLine Facts Length: 50 mm Diameter: 16.36 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Delivered in transport box Category: gauge pin FAQ What is the intended use of this gauge pin? The gauge pin is intended for end‑dimension verification and component gauging of small parts; the Metav IndustryLine M323.G36 is suitable for hole checks, pin fits and similar inspection tasks. How precise is the measurement capability? The M323.G36 offers an accuracy of ±0.002 mm, which positions it for fine mechanical checks where small deviations must be detected reliably. What material is the pin made from? The pin is manufactured from a special steel designed for durability and wear resistance in workshop conditions. Is the gauge pin supplied in a protective container? Yes, this gauge pin is supplied in a transport box to protect the measuring faces during storage and transit. Which category does this measuring tool fall into? With a maximum diameter of 16.36 mm and a compact 50 mm length, the product sits in the micro category of measuring tools, intended for fine and small‑part applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.37mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine workshop robustness, a compact 50 mm length and a high nominal accuracy of ±0.002 mm to ensure consistent end‑measure checks; order directly via Metav Werkzeuge or contact our advisors for application guidance. Gauge pin M323.G37 — single gauge pin, Ø 16.37 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.G37 is a workshop‑grade precision checking pin designed for end‑measure and fit testing in machine shops and inspection benches. High accuracy ±0.002 mm Diameter 16.37 mm precise fit 50 mm hardened special steel length Delivered in protective transport case Repeatable accuracy for end‑measure and fit testing The core advantage of this checking pin is its ±0.002 mm nominal accuracy, which supports tight tolerancing during final inspection. With a nominal diameter of Ø 16.37 mm, the component serves as a reliable reference for hole‑fit verification and end‑measure routines; the controlled tolerance reduces uncertainty when assessing mating parts. In practical terms, the fine dimensional control helps to prevent assembly rework and supports consistent quality documentation across production batches. The single‑piece design minimises interfaces that could introduce measurement variation, delivering straightforward, traceable checks on the shop floor. Built for workshop handling and durability Manufactured from special steel and presented in a workshop version, the pin balances wear resistance with manageable weight (approx. 0.15 kg) and a 50 mm length that is easy to handle at the bench. The material choice improves longevity under regular contact use while the compact length allows access in confined assemblies and fixtures. Supplied in a protective transport case, the unit arrives ready for safe storage and mobility between inspection stations, reducing the risk of surface damage that would affect measurement integrity. Practical integration into inspection workflows As a single gauge pin, this item is suitable for discrete go/no‑go checks, manual insertion tests and fixture validation tasks. The straightforward geometry makes it simple to incorporate into custom holders or to use with handheld inspection procedures. By standardising on a precisely specified reference such as this, process engineers gain reproducible checkpoints that align incoming part inspection with final assembly requirements. The compact format also supports use in maintenance toolkits where rapid fit checks are required without elaborate setup. Efficiency gains and quality assurance benefits Using a stable, workshop‑rated gauge pin reduces decision time at inspection points and contributes to a leaner quality loop. The combination of precise diameter control and robust steel construction means fewer replacements and less downtime for recalibration checks. For operations aiming to streamline end‑of‑line verification, this pin offers a pragmatic balance of accuracy and practicality, enabling faster acceptance of compliant parts and clearer identification of out‑of‑tolerance items. Contact Metav Werkzeuge for application advice on the M323.G37 gauge pin or to request a tailored quotation by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.G37 GTIN: 4061905071119 Manufacturer: Metav IndustryLine Core technical data Diameter: 16.37 mm Length: 50 mm Tolerance/accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Delivered in protective transport case Single gauge pin for end‑measure and fit testing FAQ What is the nominal tolerance of this gauge pin? The nominal tolerance is ±0.002 mm, specified for the M323.G37 gauge pin to ensure tight fit and repeatable checks. Is the pin suitable for regular workshop use? Yes, the workshop version and special steel construction make the pin appropriate for routine inspection and handling in shop environments. Can this pin be used for hole fit verification? Yes, with a diameter of Ø 16.37 mm, the gauge pin is intended for hole‑fit verification and end‑measure testing on mating parts. How is the pin delivered and protected during transport? The product is supplied in a protective transport case to prevent surface damage and preserve measurement integrity during storage and transfer. Which identifier should be used for ordering or stock control? Use SKU M323.G37 and GTIN 4061905071119 for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.38mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise end‑measurement control and robust workshop construction in a compact inspection tool; the single gauge pin delivers repeatable results with a tolerance of ±0.002 mm and a nominal diameter of Ø 16.38 mm for reliable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin, single – Ø 16.38 mm, length 50 mm (Metav IndustryLine) Gauge pin for precise end‑measurement tasks in workshop inspection and production control, supplied as an individual inspection pin in a workshop specification. Workshop‑grade construction for daily use Diameter Ø 16.38 mm for end measurements Length 50 mm for short‑reach probing Tolerance ±0.002 mm for repeatable results Precision where end dimensions matter This inspection pin is engineered for consistent end‑measurement tasks. The nominal Ø 16.38 mm diameter and 50 mm overall length combine to provide a compact probe that fits tight inspection set‑ups while still offering a stable datum point. The declared tolerance of ±0.002 mm indicates a manufacturing consistency that supports routine dimensional checks and small‑batch quality control. As a result, the tool functions well as a verification aid for turned and milled parts where end‑mass dimensions are critical. Built to withstand workshop conditions Designed in a workshop specification, the pin uses special steel as its basic material to balance wear resistance and dimensional stability under frequent handling. The compact format and modest mass mean the probe is easy to position and align during repetitive inspection cycles, reducing operator strain and minimising handling‑related variation. Supplied individually, the inspection pin integrates into existing gauge sets or pocket kits and serves as a dependable short‑reach reference for go/no‑go comparisons and manual inspection benches. Practical benefits for production control The probe’s narrow length and precise diameter support quick verification routines on production lines and small assembly stations. As a single‑piece inspection tool, it is suited to end‑dimension checks and component acceptance processes where rapid, repeatable results are required. Traceability is supported by the item identity, and the compact geometry eases storage and interchange within inspection tooling racks. For environments where concise, reliable measurements speed throughput, this compact probe provides a straightforward and robust solution. For workshop inspections and routine end‑dimension checks, choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for tailored advice and order placement via info@metav-werkzeuge.com or by telephone +49 2822 7131930. Technical data SKU: M323.G38 GTIN: 4061905071126 Label: Gauge pin, single, Ø 16.38 mm, length 50 mm Facts Diameter: 16.38 mm Length: 50 mm Weight: 0.15 kg Dimensional tolerance: ±0.002 mm Special features Material: special steel Delivery: single inspection pin Specification: workshop execution Category: gauge pins FAQ What inspection tasks is this gauge pin suited for? This gauge pin (Metav IndustryLine gauge pin, SKU M323.G38) is intended for end‑dimension checks and short‑reach verification in workshop and production environments. What level of precision can be expected from the pin? Manufactured with a declared tolerance of ±0.002 mm, the pin provides repeatable dimensional references suitable for precise inspection routines. What material is the pin made from and how does that affect durability? The pin is made from special steel, offering a balance of wear resistance and dimensional stability for frequent handling in workshop conditions. Is the item supplied individually or as part of a set? This product is supplied as an individual inspection pin (single delivery), suitable for integration into existing inspection kits. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.39mm Gauge Pin Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop robustness, ±0.002 mm accuracy and compact handling to secure repeatable end‑measurement results; order the gauge pin directly via Metav Werkzeuge or contact the consultants for specification support. Gauge pin M323.G39 — single precision pin, 16.39 mm / 50 mm (Metav IndustryLine) The gauge pin M323.G39 is a single precision measurement pin designed for end‑measurement and reference checks in workshop environments, combining compact geometry with a reliable tolerance for routine gauging tasks. Single gauge pin, 16.39 mm diameter 50 mm hardened length for stable handling Accuracy ±0.002 mm for precise end measurements Workshop version with special steel construction Consistent precision for routine end measurements The M323.G39 is engineered to deliver consistent repeatability in end‑measurement applications. Its nominal diameter of 16.39 mm and the declared tolerance of ±0.002 mm provide a dependable reference that reduces uncertainty during go/no‑go checks, fixture set‑up and assembly verification. For production settings where quick, repeatable checks are required, the compact single‑pin design shortens measuring cycles and supports faster decision making on the shopfloor. The narrow tolerance also assists in maintaining traceable inspection results when combined with documented measurement routines. Durable workshop construction for everyday use Built as a workshop execution component from special steel, this pin is intended to withstand the mechanical demands of regular handling and short‑term contact with components. The 50 mm length gives a practical balance between reach and stiffness, helping to avoid flex under hand pressure while remaining easy to position in small fixtures or bores. Thanks to its robust material and design, the gauge pin remains a stable reference over repeated use, which lowers the frequency of replacement and supports uninterrupted inspection workflow. Practical identification and easy inventorying The pin is supplied as a single item with a clear identifier (SKU M323.G39), simplifying stocking and replacement procedures in toolrooms and quality departments. The compact mass and nominal dimensions mean the pin integrates cleanly into existing gauge sets or inspection kits used for end‑measurements. Where traceability is required, the delivered item can be entered into asset registers by its article and GTIN, enabling consistent documentation of which reference pins were used during specific checks or batches. Contact Metav Werkzeuge today to discuss the M323.G39 gauge pin from Metav IndustryLine and arrange purchase or technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.G39 GTIN: 4061905071683 ECLASS: 21170231 SKU: M323.G39 Numbers / Core technical data Diameter: 16.39 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop execution Single gauge pin Intended for end‑measurement tasks FAQ What is the primary use of this gauge pin? The gauge pin M323.G39 (Metav IndustryLine) is intended for end‑measurement and reference checks, serving as a precise mating or go/no‑go reference in workshop gauging and fixture set‑up. What accuracy can be expected from the pin? The M323.G39 is specified to ±0.002 mm, which provides tight repeatability suitable for workshop inspection tasks and routine dimensional checks. What material is the gauge pin made from? This gauge pin is manufactured from special steel, chosen for durability in a workshop environment and stable dimensional behaviour under frequent handling. Is the gauge pin delivered as a single item or in a set? The product is supplied as a single gauge pin under SKU M323.G39 to simplify replacement and inventory management. Can the pin be used for setting up fixtures and gauges? Yes, the M323.G39 is designed to serve as a reference element for fixture set‑up and short inspection runs where a compact, accurate pin is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.3mm Gauge Pin Length 50mm Workshop Version, Special Steel ±0.002 - Metav IndustryLine
Take advantage of precise bore checking with a 16.3 mm diameter and 50 mm length combined with industry‑grade robustness; the workshop‑grade construction and a tight ±0.002 mm tolerance support repeatable end‑measure controls. Order the gauge pin directly via Metav Werkzeuge or ask the consultants if needed. Gauge pin M323.G30 — test pin (Ø 16.3 mm, 50 mm length) by Metav IndustryLine A workshop‑grade gauge pin M323.G30 designed for end‑measure checks and bore gauging, combining high repeatability with compact handling for workshop use Workshop version for robust daily use High precision: ±0.002 mm accuracy Diameter 16.3 mm for bore gauging Compact length 50 mm for tight spaces Engineered precision for routine gauging The gauge pin is manufactured to a declared ±0.002 mm tolerance, delivering a level of repeatability that reduces adjustment cycles and rejects in serial inspection. Classified in the micro measurement range (10–100 mm), this size bracket is optimised for fine mechanical work where short jaws and minimal deflection matter; the 16.3 mm diameter provides a stable reference for bore checks and end‑measure setups. The narrow tolerance supports faster decision‑making in quality control processes because deviations are immediately detectable against a tight reference. Durability that suits workshop environments Constructed from special steel, the pin is finished for wear resistance and dimensional stability under frequent handling. The 50 mm length keeps the tool compact and easy to position in confined bores while maintaining sufficient engagement for secure checking. With a mass of approximately 0.15 kg, handling is unencumbered and tactile feedback during insertion is consistent, reducing the risk of misuse. The workshop version designation points to a design balanced for everyday use rather than purely laboratory conditions, so the pin withstands routine handling without compromising the measurement reference. Where this pin adds value in production As a dedicated reference element for end‑measure and bore verification, the test pin integrates into incoming inspection, go/no‑go checks and fixture setting tasks. Its dimensions and tolerance make it suitable for use as a setting standard in gauging stations and as a master pin for ring gauges or plug gauges. Compatibility with existing metrology benches is supported by the standardised diameter and length, enabling smooth workflow integration and fewer adapter requirements. Clear technical specification simplifies procurement and reduces the effort required to match tooling to inspection fixtures. For precise bore verification and dependable workshop performance, request the Metav IndustryLine gauge pin M323.G30 from Metav Werkzeuge in Emmerich; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.G30 GTIN: 4061905070112 Material: Special steel Version: Workshop‑grade Facts Diameter: 16.3 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Supplied as a single gauge pin Intended for end‑measure and bore gauging ECLASS: 21170231 FAQ What tolerance is specified for this gauge pin? The gauge pin M323.G30 from Metav IndustryLine specifies an accuracy of ±0.002 mm, suitable for high‑precision routine checks. Is an ISO 17025 calibration certificate supplied? No ISO 17025 calibration status is declared in the product data for this gauge pin; the product data does not state an ISO 17025 certificate. For which measurement category is this pin intended? This test pin falls within the micro measurement range (10–100 mm), making it ideal for fine mechanical and workshop bore checks. What applications suit this test pin? Typical uses include end‑measure controls, bore gauging, setting fixtures and as a reference element for ring or plug gauge checks; the dimensions support straightforward fixture integration. How is the item supplied? The product is listed as a single gauge pin (supplied individually) and is offered under the Metav IndustryLine product line (SKU M323.G30). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.4 mm Gauge Pin 50 mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of precise ±0.002 mm tolerance, special steel construction and a compact 50 mm length for reliable end‑size verification; order the gauge pin directly via Metav Werkzeuge or consult our advisers for application-specific advice. Gauge pin, single — 16.4 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single — 16.4 mm Ø, 50 mm length is a workshop‑grade inspection pin for accurate end‑size checks and fixture verification in machining and quality‑control environments. Workshop‑grade construction Diameter 16.4 mm precision fit 50 mm length for end‑size checks Tolerance ±0.002 mm Dependable precision for end‑size verification This inspection pin delivers consistent results where repeatability matters: the 16.4 mm diameter and declared ±0.002 mm variation make it suitable for tight fit and end‑dimension checks in assembly and jig set‑up. As a single‑piece inspection dowel, it supports quick go/no‑go assessments and measurement transfer tasks. The compact design reduces the risk of deflection during handling and preserves measurement integrity, so routine checks remain both efficient and reliable. Durable, workshop‑tuned construction Manufactured from special steel, the pin is specified for regular workshop use where resistance to wear and dimensional stability are required. The choice of material ensures high surface hardness after heat treatment and a long service life under repeated insertion cycles. The workshop‑grade configuration combines robustness with practical handling characteristics, delivering dependable performance in machine shops, maintenance bays and production testing stations. Simple integration into inspection workflows With a 50 mm overall length and low mass, the pin is easy to position in fixtures, gauges and bore checks, supporting fast measurement routines and minimal set‑up time. The form factor assists in maintaining consistent contact geometry for repeatable results, while the compact dimensions suit bench testers and portable inspection kits alike. The component is supplied as a single inspection pin suitable for calibrated tool sets and traceable measurement procedures. For dependable end‑size checks choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for specification matching, batch availability or tailored advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M323.G40 GTIN: 4061905071690 Brand: Metav IndustryLine Facts Diameter: 16.4 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Single inspection pin Workshop version FAQ What is the declared tolerance of this inspection pin? The gauge pin is specified with a dimensional variation of ±0.002 mm, providing the accuracy expected for tight end‑size and fit checks with the Metav IndustryLine inspection pin. Is the pin suitable for fixture and gauge set‑up? Yes, the single inspection pin with a 16.4 mm diameter and 50 mm length is intended for fixture alignment and verification tasks in machining and assembly processes. What material is used for the pin and how does that affect wear? The pin is made from special steel, chosen to offer improved wear resistance and dimensional stability for repetitive insertion and go/no‑go applications. Can this pin be used for portable inspection kits? The compact 50 mm length and low mass make the pin well suited for portable inspection kits and bench testers, enabling rapid, repeatable checks on the shop floor. What is included when ordering the M323.G40 gauge pin? Orders include the single inspection pin (SKU M323.G40) as described; specifications such as diameter, length and declared tolerance are provided for integration into quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.41mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Reliable reference measuring with 16.41 mm diameter and ±0.002 mm tolerance ensures consistent inspection results; combined with a 50 mm length and special steel construction in a workshop version, the pin is supplied in a protective case for secure transport. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for batch supply and documentation. Gauge Pin M323.G41 — 16.41 mm Ø, 50 mm Length (Workshop Version) A Gauge Pin M323.G41 designed as a robust reference pin for go/no‑go checks, alignment and end‑measure inspection in workshop environments. Workshop version for robust industrial use Diameter 16.41 mm for precise fits Length 50 mm for stable handling Tolerance ±0.002 mm for fine accuracy Precision where production tolerances count A compact reference pin delivers reproducible results in serial and spot inspections. The ±0.002 mm tolerance class positions this test pin among high‑precision workshop tools, reducing measurement scatter and rework. Its controlled diameter of 16.41 mm provides a defined reference for fit and clearance checks; thanks to the tight specification, the pin is suitable for use as a go/no‑go datum or alignment aid where consistent repeatability shortens inspection time and supports process stability. Built to withstand workshop demands The workshop‑grade construction in special steel offers increased wear resistance and reliable surface integrity during repeated insertions and contact cycles. The 50 mm length balances accessibility with stiffness, so the pin can be handled comfortably while resisting bending during use. Supplied in a protective case to prevent transport damage, this single gauge pin is configured for everyday use on production floors and in maintenance departments, making it a dependable component of a pragmatic inspection kit. Practical integration into quality workflows As a standardised reference element, the pin integrates easily with manual inspection jigs and fixture setups, speeding up verification tasks without complex calibration routines. Traceable marking and the concise physical dimensions simplify inventory allocation and tool tracking. When used alongside existing measurement equipment, the pin helps to anchor process checks to a stable mechanical datum, contributing to fewer false rejects and a smoother quality workflow. For dependable workshop inspection, request the M323.G41 gauge pin from Metav Werkzeuge — contact our Emmerich team for availability, batch supply options and documentation support. Technical data Article number: M323.G41 GTIN: 4061905071706 Manufacturer: Metav IndustryLine Facts Diameter: 16.41 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Supplied in protective case Single gauge pin for end‑measure checks FAQ What inspection tasks is this gauge pin intended for? The gauge pin M323.G41 is intended for go/no‑go checks, alignment and end‑measure inspection in workshop and production settings, providing a repeatable mechanical reference. Is the pin suitable for repeated use on the shop floor? Yes, the workshop version with a special steel body is designed for durable, repeated contact cycles and comes supplied in a protective case to reduce transport and storage damage. How tight is the dimensional accuracy of the pin? Dimensional accuracy is specified as ±0.002 mm, which supports fine tolerance verification and consistent fit testing for components requiring precise clearances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.42 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of precise dimensional control, robust workshop design, and straightforward handling for reliable inspection workflows; order the gauge pin directly from Metav Werkzeuge or consult their specialists for application advice. Gauge pin M323.G42 — 16.42 mm Ø, 50 mm length (Metav IndustryLine) A Gauge pin M323.G42 designed for precise end‑measure verification and fit checks in workshop inspection and production environments. Workshop version for robust handling Diameter 16.42 mm for precise fits Length 50 mm, balanced rigidity Accuracy ±0.002 mm for tight tolerances Precision that supports repeatable inspection results The gauge pin delivers measurable precision with an indicated positional deviation of ±0.002 mm, making it suitable where repeatable dimensional checks are required. With a nominal diameter of 16.42 mm and classification in the micro range (10–100 mm), this component is optimised for fine mechanical tasks and small‑part inspection. The tight tolerance ensures minimal uncertainty when used for end‑measure verification, plug fits or comparative checks within standard workshop metrology routines. Built for workshop use with secure handling and transport As a workshop version, the pin is manufactured from special steel for consistent performance under everyday use. The overall 50 mm length offers a balance between reach and stiffness, while the mass of 0.15 kg provides a stable feel in handheld inspections. Supplied individually and packed in a transport box, the item arrives protected for transit; the packing is intended for safe delivery rather than permanent storage. This configuration reduces handling risk and keeps the measuring surface ready for immediate use. Designed to integrate into routine quality control The M323.G42 is a practical tool for end‑measurement control and fit assessment during incoming inspection, assembly checks or tool setting. Its workshop focus simplifies adoption into existing processes, supporting quicker decision making and fewer reworks through dependable, repeatable readings. Backed by Metav’s emphasis on accessible precision and a broad industrial catalogue, this gauge pin aids consistent quality workflows while fitting seamlessly into standard inspection kits. Contact Metav Werkzeuge for application guidance on the M323.G42 and to discuss delivery or customised measuring solutions via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.G42 GTIN: 4061905071713 Manufacturer: Metav IndustryLine Facts Diameter: 16.42 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: Special steel Delivery: transport box Category: Gauge pins eClass: 21170231 FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.G42 is specified with an accuracy of ±0.002 mm, suitable for tight tolerance checks in workshop environments. Is the pin suitable for small‑part inspection? Yes, with a 16.42 mm diameter and classification in the micro range, the pin is intended for fine mechanical and small‑part inspection tasks. What material is the pin made from? The pin is made from special steel, chosen for consistent dimensional stability and everyday workshop durability. How is the item delivered? The gauge pin is supplied individually and packed in a transport box to protect the measuring surface during shipping. Can the M323.G42 be used for plug‑fit verification? Yes, the dimensional specification and tight accuracy make the M323.G42 suitable for plug‑fit and end‑measure verification in inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.43mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of the combination of high reproducibility, compact geometry and a robust workshop finish to secure consistent end‑measurements across production and inspection processes; order the M323.G43 gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.G43 gauge pin — precision gauge pin with 16.43 mm diameter and ±0.002 mm tolerance M323.G43 gauge pin is a single high‑precision pin designed for reliable end‑measurements and fixture checks in workshop environments Exact diameter 16.43 mm for end‑measurement tasks Tolerance ±0.002 mm for tight reproducibility Workshop version with durable special steel finish Consistent measurement quality for small but critical checks The compact, solid geometry of this gauge pin delivers repeatable contact conditions that matter when checking final dimensions or verifying assemblies. With a nominal diameter of 16.43 mm and a manufacturing tolerance of ±0.002 mm, the component provides a measurable reference that reduces variability in pass/fail decisions. The calibrated form stability inherent in the design minimises bending under local loading and supports fast, objective gauging routines in series inspections. Robust design matched to everyday workshop demands Constructed from special steel, the pin combines wear resistance with sufficient surface quality for tactile and optical checks. The 50 mm length offers a balanced free reach for insertion and extraction while keeping the centre of mass low, which helps prevent handling errors during repetitive use. The workshop specification ensures a surface and finish that withstands standard handling and cleaning procedures typical in machine shops and inspection bays. Easy integration into fixture and gauge sets As a single‑piece gauge pin with a standardised diameter, this item simplifies stocking and fixture planning: it works equally well as a reference for plug gauges, as a locating element in jigs, or as a functional limit plug in assembly checks. The slender but stable form factor supports rapid positioning in bores and recesses, and the tight tolerance allows it to serve as a reliable go/no‑go reference in comparative audits and incoming inspection tasks. For application support or to order the M323.G43 gauge pin, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data Article number: M323.G43 GTIN: 4061905071720 Label: Gauge pin, single, 16.43 mm diameter, length 50 mm Facts Diameter: 16.43 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution SKU: M323.G43 FAQ What level of dimensional accuracy does this gauge pin offer? The M323.G43 gauge pin is manufactured to a tolerance of ±0.002 mm, providing the tight reproducibility required for fine end‑measurements and fixture verification. Which material is used for the pin and what does that mean for wear? The pin is made from special steel, chosen for a balance of hardness and surface integrity; this yields good wear resistance under normal workshop gauging conditions. Can this gauge pin be used as a locating element in jigs and fixtures? Yes. The M323.G43 gauge pin’s stable geometry and precise diameter make it suitable for use as a locating or reference element in jigs, fixtures and assembly gauges. Is the M323.G43 suitable for optical inspection or tactile checks? The surface finish and dimensional stability of the M323.G43 allow use in both optical and tactile inspection setups, offering a consistent reference for comparative measurements. What identifies this product for ordering and stock purposes? Order using SKU M323.G43 or GTIN 4061905071720; the product is listed as a single gauge pin with a 16.43 mm diameter and 50 mm length. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.44mm Test Pin Workshop Version 50mm Length - Metav IndustryLine
Take advantage of workshop-grade precision, compact handling and repeatable results to streamline inspection tasks; the combination of a 16.44 mm diameter, 50 mm length and a tight ±0.002 mm tolerance ensures reliable verification of end dimensions. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin (single) – 16.44 mm diameter, 50 mm length, Metav IndustryLine A gauge pin designed for precise end-dimension checks and quick workshop verification; a compact inspection pin for measuring, checking and referencing close-tolerance fits. Workshop-grade design Diameter 16.44 mm for gauge control Length 50 mm for compact checks High repeatability: ±0.002 mm tolerance Special steel construction for durability Consistent accuracy that reduces rework and inspection time A compact inspection tool that brings repeatable measurement into everyday use: with a declared tolerance of ±0.002 mm, this pin supports tight control limits in production and inspection environments. The small footprint and manageable weight make it straightforward to handle during rapid checks, while the close tolerance reduces the incidence of false rejects and rework. The specification emphasises measurable benefits—shorter inspection cycles and more reliable pass/fail decisions—so quality teams can focus on throughput and conformance rather than corrective action. Robust construction for regular workshop use Built as a workshop-grade item from special steel, the pin resists wear in routine use and maintains its geometry during handling. The construction supports frequent insertion and withdrawal from bores and gauges without rapid degradation, which keeps calibration intervals longer and running costs lower. The length of 50 mm offers enough engagement for many common checks while staying compact enough for handheld use or placement in inspection jigs. Durability here means predictable results over many cycles, which benefits planning and cost control. Practical integration into inspection workflows The pin is suited to applications where end dimensions and fits must be verified quickly: use it for go/no-go checks, reference setting and comparative measurements on mating parts. Traceability is supported through the article identifiers provided in the technical data, aiding inventory and quality documentation. As a simple precision tool, it complements digital or analogue metrology equipment and slots into standard workshop routines where fast, reliable checks are required. The emphasis is on operational efficiency and measurable improvement to quality procedures. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and speedy delivery from Emmerich. Technical data Article number: M323.G44 GTIN: 4061905449109 ECLASS: 21170231 Category: Gauge pins Weight: 0.15 kg Dimensions & tolerances Diameter: 16.44 mm Length: 50 mm Measuring range: 16.44 mm (min / max) Accuracy / tolerance: ±0.002 mm Materials & features Material: special steel Design: workshop version Packaged as single unit Story trigger: end dimensions FAQ What measurement accuracy can be expected from this gauge pin? The gauge pin delivers an accuracy of ±0.002 mm; the specification for the Metav IndustryLine gauge pin (SKU M323.G44) supports fine tolerance checks in standard workshop applications. Is the material suitable for regular insertion checks and light wear? Yes, the pin is manufactured from special steel and the workshop-grade design ensures durability for frequent insertion and verification tasks. What sizes does the pin cover and how is it identified in stock systems? The pin is a single 16.44 mm diameter, 50 mm length inspection pin and is listed under SKU M323.G44 with GTIN 4061905449109 for traceability. Can this pin be used as a reference for setting gauges and fixtures? This inspection pin is appropriate for setting and checking fixtures where a fixed, repeatable reference of 16.44 mm is required; its compact length supports use in many common setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.45mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise end‑size control, robust workshop construction and protective transport packaging to reduce inspection time and rework. Order this gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.G45 – single precision test pin, Ø 16.45 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.G45 is a single test pin designed for reliable end‑size checks and reference measurements in inspection, assembly and toolmaking applications. Workshop version for industrial use High precision ±0.002 mm Ø 16.45 mm, length 50 mm Delivered in protective transport case Consistent precision for end‑size inspection A single, hardened test pin provides a compact reference for end‑size verification and pass/fail checks. The combination of a nominal Ø 16.45 mm diameter and an accuracy of ±0.002 mm ensures repeatable measurements under routine workshop conditions — a clear rational benefit for quality control workflows. Using a dedicated reference pin reduces interpretation variance compared with improvised gauges and speeds up inspection cycles, which supports throughput and reduces downstream rework. Durable construction suited to the workshop Constructed from special steel and supplied in a protective transport case, this inspection pin is built for frequent handling in production environments. The workshop version specification signals reinforced workmanship where resistance to wear and reliable seating in bores are essential. The solid feel and listed weight of 0.15 kg add to handling stability during checks, giving technicians a durable tool that maintains geometrical integrity over repeated use. Practical integration into inspection routines Designed as a straightforward reference instrument, the pin is particularly useful for final size validation, assembly fit tests and simple functional gauging tasks. The compact 50 mm length and single‑piece construction allow easy placement into jigs, go/no‑go fixtures or comparison benches. Clear product identification (SKU M323.G45, GTIN 4061905067549) supports inventory control and ordering in structured procurement systems, while the workshop specification makes it a practical component of daily quality checks. For precise end‑size control choose the Metav IndustryLine gauge pin M323.G45 – ask Metav Werkzeuge in Emmerich for detailed application advice and delivery options. Technical Data Article number: M323.G45 GTIN: 4061905067549 Manufacturer: Metav IndustryLine Data Diameter: 16.45 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Delivered in protective transport case Application: End‑size checks FAQ How accurate is this gauge pin? The gauge pin M323.G45 is specified with an accuracy of ±0.002 mm, suitable for precise end‑size inspections and repeatable workshop measurements. What material is the pin made from and is it robust enough for frequent use? The test pin is manufactured from special steel and supplied as a workshop version, providing wear resistance appropriate for regular inspection tasks and handling. Is a transport or storage case included? Yes, delivery includes a protective transport case to keep the pin secure during storage and transit. Which applications is this pin best suited to? The pin is intended for end‑size checks, assembly fit verification and use as a simple reference gauge in inspection benches and go/no‑go fixtures; it is sold under SKU M323.G45 by Metav IndustryLine. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.47 mm Gauge Pin Length 50 mm Workshop Finish - Metav IndustryLine
Compact, workshop-ready gauge pin combining robust special steel construction with a tight ±0.002 mm tolerance and a convenient 50 mm working length for reproducible end-measurements; order the gauge pin M323.G47 directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.G47 — Gauge pin, 16.47 mm nominal, 50 mm length (Metav IndustryLine) The gauge pin M323.G47 is a single inspection pin designed for precise end-measurements and quick dimensional checks in workshop metrology and quality-control processes. Workshop-grade construction Nominal diameter 16.47 mm Length 50 mm Tolerance ±0.002 mm Consistent accuracy for end-measurement tasks The M323.G47 functions as a high-precision gauge pin, providing reproducible results where tight limits matter. With a nominal diameter of 16.47 mm and a declared tolerance of ±0.002 mm, this inspection pin supports reliable pass/fail assessments and assembly checks. The use of special steel offers dimensional stability and resistance to everyday workshop wear, which helps to preserve the crucial tolerance band over repeated use. Such predictability reduces rework and contributes to a smoother inspection routine. Robust design made for daily workshop use Designed as a workshop variant, the pin withstands the demands of production environments while remaining compact at 50 mm length and a mass of 0.15 kg. The single-item format simplifies replacement and inventory control for spares and fixture setups. The construction prioritises handling and fixture compatibility, so integration into existing checking rigs or manual gauges is straightforward. This combination of durability and compactness supports efficient measurement cycles and fewer interruptions on the shop floor. Traceability and straightforward identification Inventory and traceability are supported by clear identifiers: SKU M323.G47 and a GTIN for catalogue and procurement systems. The compact dimensions and standardised diameter simplify ordering of mating bushings, sockets or reference blocks for end-point verification. By keeping component identification simple and consistent, the inspection workflow benefits from faster set-up times and fewer measurement ambiguities, which is particularly valuable when documenting batch inspections or transferring results into quality-management systems. For reliable end-measurement components choose the Metav IndustryLine gauge pin M323.G47 — contact Metav Werkzeuge in Emmerich for personalised advice and assured supply from a trusted European precision partner Technical Data Article number: M323.G47 GTIN: 4061905068515 Label: Prüfstift, einzeln, 16,47 mm Länge 50 mm Manufacturer: Metav IndustryLine Core specifications Nominal diameter: 16.47 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Spezial-Stahl Workshop version Single item delivery Application: end measurements FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.G47 is specified with a tolerance of ±0.002 mm, suitable for precise end-measurement and dimensional verification tasks. Is the product supplied as a single item or in sets? This item is supplied as a single inspection pin; the product listing denotes individual delivery. What material is used for the pin and how does it affect usage? The pin is manufactured from special steel, chosen for dimensional stability and resistance to routine workshop wear, supporting consistent measurement results. How can the product be identified for procurement and stock control? Identification is via SKU M323.G47 and GTIN 4061905068515; the item is listed under the Metav IndustryLine brand for catalogue and ordering purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.48mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of workshop-grade robustness, tight tolerance (±0.002 mm) and a compact 50 mm length for reliable end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists if specification support is required. Gauge pin M323.G48 — Gauge pin, Ø 16.48 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.G48 is a workshop‑grade precision pin for end‑measure verification and fit testing in production and inspection environments. Workshop‑grade construction Diameter 16.48 mm with fine tolerance Length 50 mm for compact installations Tolerance ±0.002 mm for precise checks Consistent measurement where it matters A gauge pin built for repeatable results reduces rework and inspection time. The M323.G48 combines a 16.48 mm diameter with a ±0.002 mm variation limit to support tight assembly and fit‑up tolerances common in jigs, fixtures and batch inspections. The compact 50 mm length keeps the pin easy to handle while offering sufficient engagement for end‑measure checks. The specified accuracy ensures that measurements are comparable across shifts and operators, which stabilises process capability and improves throughput. Designed for workshop use and lasting performance The workshop version construction means the gauge pin tolerates frequent handling and routine use in production environments. Manufactured from special steel, the pin resists deformation under normal insertion forces and maintains form over many cycles. Supplied in a protective case for transport and storage, the item arrives ready for immediate use and is straightforward to integrate into existing gauge sets or inspection benches. This durability lowers total cost of ownership by reducing replacement frequency and downtime for sourcing spares. Practical benefits for inspection and assembly Using a dedicated inspection pin simplifies go/no‑go checks and end‑dimension verification during assembly. The precise diameter and low runout inherent in a dedicated gauge pin make it suitable for verifying bore size, locating features and setting up fixtures where tight fits are required. The compact form factor supports accessibility in confined assemblies and enables quick tactile verification by operators, improving inspection speed without sacrificing confidence in the result. Quality and traceability for production workflows Accuracy specifications and a clearly identified SKU mean the pin can be tracked in quality documentation and integrated into inspection plans. The M323.G48 is supplied ready to use and its defined tolerance helps maintain a clear link between measurement results and process adjustments, supporting continuous improvement activities and supplier audits. For customers seeking a robust, easy‑to‑manage solution, this pin complements a shop’s existing toolkit with predictable performance. For a workshop‑ready measurement solution from Metav IndustryLine, request the M323.G48 gauge pin via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored specification support Technical data SKU: M323.G48 GTIN: 4061905068522 Label: Prüfstift, einzeln, 16,48 mm Länge 50 mm Brand: Metav IndustryLine Material: Spezial‑Stahl Version: Werkstatt‑Ausführung Core specifications Diameter: 16.48 mm Length: 50 mm Weight: 0.15 kg Tolerance / accuracy: ±0.002 mm Special features Supplied in protective case for transport and storage Workshop execution for frequent handling Compact form factor for restricted spaces FAQ What is the declared tolerance of the gauge pin? The M323.G48 gauge pin is specified with an accuracy of ±0.002 mm, making it suitable for fine fit and end‑measure checks. Which material is used for this inspection pin? This inspection pin is made from special steel, chosen for its wear resistance and dimensional stability under normal workshop use. Is the pin delivered ready for use and protected for transport? Yes, the M323.G48 is supplied in a protective case appropriate for transport and short‑term storage to preserve its measurement integrity. For which applications is this gauge pin best suited? The pin is ideal for end‑dimension verification, fit testing in assembly jigs and quick go/no‑go checks where a compact, precise cylindrical reference is required. How can the M323.G48 be ordered or specified for project use? Order the M323.G48 through Metav Werkzeuge (SKU M323.G48) and request specification support from the Metav consultants if integration into custom inspection plans is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.49mm Gauge Pin, Single, 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact inspection pin that combines high repeatability and robust workshop design — ideal for routine end‑dimension checks. With a 16.49 mm nominal diameter, 50 mm length and a fine tolerance of ±0.002 mm, order the pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.G49 test pin — 16.49 mm Ø, 50 mm length (Metav IndustryLine) The M323.G49 test pin is a workshop-grade inspection pin intended for precise end‑dimension verification and use as a reference gauge in routine measuring processes. High-precision tolerance ±0.002 mm Nominal diameter 16.49 mm Length 50 mm for depth inspections Workshop-grade special steel construction Repeatable dimensional control for routine inspections The compact design provides a stable reference for pass/fail checks and comparative measurements. With a specified tolerance of ±0.002 mm, the pin supports tight acceptance criteria while keeping handling straightforward. The combination of nominal diameter 16.49 mm and a 50 mm effective length makes the component suitable for checking bores, plug fits and end‑measurements where a short, rigid gauge is required. This precision supports reduced rework and faster inspection cycles in production environments. Robust construction that suits workshop conditions Built as a workshop version, the pin is manufactured from special steel to withstand frequent use and mild impacts typical for shop floors. At approximately 0.15 kg, the component offers good mass for stable seating without being cumbersome during manual inspections. The material choice balances wear resistance and dimensional stability, prolonging service life under standard workshop handling. This durability translates into predictable measurement behaviour and lower replacement frequency. Practical integration into metrology routines The pin functions as a straightforward inspection aid for assembly, quality control and incoming inspection tasks. It is compatible with common bench fixtures and can be used alongside micrometers, depth gauges and comparator setups as a reproducible contact surface. For traceable results, record measurements against the pin’s nominal 16.49 mm dimension and stated tolerance; the clear specification aids in documenting conformity during batch checks. The small footprint and familiar geometry make it a convenient addition to any metrology kit. Choose the Metav IndustryLine M323.G49 when consistent, workshop-ready reference measurements are needed — contact Metav Werkzeuge for technical guidance and prompt supply from Emmerich. Technical data SKU: M323.G49 GTIN: 4061905068539 Article: Test pin, single, 16.49 mm diameter, length 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 16.49 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Features Workshop version Material: special steel Category: Measuring pins FAQ What inspection tasks is this pin suited for? The M323.G49 test pin is designed for end‑dimension checks, plug fits and short‑range bore verification in workshop and production inspection routines. Does the pin come calibrated to a national standard? The supplied data does not specify a calibration certificate; the M323.G49 is specified with its nominal dimension and tolerance for immediate use in routine checks. Is the material suitable for frequent contact use? Yes, the pin is made from special steel and the workshop‑grade design is intended for repeated handling and standard inspection wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.51 mm Gauge Pin Length 50 mm Workshop Finish - Metav IndustryLine
Reliable workshop measurement with a compact form factor: the pin’s 16.51 mm nominal diameter, ±0.002 mm repeatability and 50 mm length combine to support consistent end‑measurements and fast in‑process checks. Order the item directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.G51 — gauge pin for precise end‑measurements, 16.51 mm diameter, ±0.002 mm tolerance (Metav IndustryLine) The Test pin, single, 16.51 mm, 50 mm length is a workshop‑grade gauge pin designed for reliable end‑measurement checks, go/no‑go verifications and fixture validation in mechanical workshops and metrology stations. Precision tolerance ±0.002 mm Diameter 16.51 mm nominal Workshop version, 50 mm length Dependable precision for end‑measurement checks Built for tasks that demand measurable repeatability, this gauge pin delivers a ±0.002 mm specification that aligns with fine workshop control and many inspection routines. The compact geometry and defined nominal diameter of 16.51 mm make it suitable for checking bores, alignment seats and end faces where dimensional certainty reduces rework and speeds up quality decisions. The numerical tolerance provides a clear technical basis for acceptance limits and process control charts, supporting efficient root‑cause analysis when deviations occur. Robust construction suited to everyday workshop use Manufactured from special steel, the component is hardened and finished for stable performance under repeated handling and light assembly tasks. The 50 mm shaft length and workshop version build prioritise ease of use: the pin is simple to mount in fixtures, insert into bores and hold for quick comparative checks. With a mass of 0.15 kg, it is easy to manoeuvre while still providing the rigidity needed to avoid measurement artefacts caused by flexing. The solid construction therefore translates into fewer measurement cycles lost to replacement or adjustment. Practical integration into inspection routines and fixtures Supplied as a single‑item gauge, the pin integrates into common inspection jigs, plug gauges and assembly controls without complex setup. Identification by SKU M323.G51 and GTIN ensures traceability within procurement and inspection records, enabling consistent replenishment and audit trails. For process engineers this single‑purpose gauge is a straightforward tool to lock down a critical diameter during set‑up or to verify mating parts before final assembly, delivering clear, reproducible pass/fail outcomes that support continuous production flow. Contact Metav Werkzeuge for a technical suitability check or a customised quote, quoting SKU M323.G51 and GTIN 4061905068553 Technical data Article number: M323.G51 GTIN: 4061905068553 Label: Test pin, single, 16.51 mm, 50 mm length Manufacturer: Metav IndustryLine Core measurements Diameter: 16.51 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Single test pin Material: Special steel Category: Gauge pin (Messstifte) FAQ Is this pin suitable for bore inspection and go/no‑go checks? Yes. The test pin is specified for end‑measurement checks and go/no‑go validation; its 16.51 mm nominal diameter and ±0.002 mm tolerance make it appropriate for bore verification tasks. Does the instrument come as a calibrated item? The product description does not state a calibration certificate; the test pin is supplied as a workshop‑grade gauge. For calibrated delivery options and traceable certificates, contact Metav Werkzeuge and reference SKU M323.G51. What material is used for the pin and how does that affect durability? Constructed from special steel, the pin is designed for workshop durability and repeated insertion cycles; this material choice prioritises stability and wear resistance for routine inspection use. Can the pin be mounted in fixtures or used with standard plug gauge holders? Yes. The single‑item format and compact 50 mm length allow straightforward integration into common fixtures and holders for quick verification or assembly checks. How should the pin be identified in procurement and records? Use SKU M323.G51 and GTIN 4061905068553 for ordering and traceability; including these identifiers in inspection logs simplifies stock management and audit trails. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.52mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Compact inspection capability with a 16.52 mm nominal diameter, 50 mm length and a close ±0.002 mm tolerance delivers reliable end‑size checks for workshop and production use. Order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin (single) 16.52 mm × 50 mm — Metav IndustryLine The Test pin M323.G52 is a workshop‑grade inspection pin designed for precise end‑size control and repeatable dimensional verification in industrial metrology and routine quality checks. Workshop-grade special steel construction Precise diameter 16.52 mm Length 50 mm for end-size checks Tight tolerance ±0.002 mm Reliable tolerances for repeatable inspection results A nominal diameter of 16.52 mm combined with a guaranteed ±0.002 mm manufacturing tolerance ensures that this inspection pin supports consistent end‑size verification on production runs. The tight tolerance reduces uncertainty during final checks, which streamlines pass/fail decisions and shortens inspection cycles. For metrology tasks where even small deviations can cascade into scrap or rework, the pin’s dimensional stability provides a measurable improvement in process control. Robust workshop design that aids handling and longevity Constructed from special steel and delivered in a workshop execution, the pin withstands frequent handling and the typical mechanical stresses of a busy shop floor. The 50 mm length offers a practical balance between reach and rigidity, allowing secure seating in holders or fixtures without excessive flex. This combination of material and geometry reduces the risk of handling damage and supports longer service intervals, lowering downtime for routine inspections. Fits seamlessly into quality workflows and documentation Marked as a single inspection pin and identified as M323.G52, the component integrates easily into existing gauging sets and inspection stations. Its clear specification simplifies traceability in quality records and production reports, supporting efficient sampling plans and statistical process control routines. The compact format also makes it suitable for calibration routines where space and access are limited, helping maintain a consistent measurement chain from workshop floor to quality documentation. For workshop-grade, traceable inspection equipment from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for availability, application guidance and order processing Technical data Article number: M323.G52 GTIN: 4061905068560 Brand: Metav IndustryLine Material: special steel Label: test pin, single, 16.52 mm diameter, 50 mm length Facts Diameter: 16.52 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop execution Single inspection pin format Category: gauging pins (Messstifte) Intended use: end‑size and dimensional verification FAQ What is the intended application for this inspection pin? The Metav IndustryLine test pin M323.G52 is intended for end‑size checks and repeatable dimensional verification in workshop and production quality control. Is the dimensional tolerance suitable for precision inspection tasks? Yes, the ±0.002 mm tolerance of this test pin makes it appropriate for high‑accuracy workshop inspections and final quality checks. Which material is used and why does it matter? The pin is made from special steel, selected for its wear resistance and dimensional stability under frequent use in workshop environments. How does the length affect measurement use? The 50 mm length provides a practical balance between reach and stiffness, making the pin easy to seat in fixtures while keeping deflection minimal during checks. Can this pin be identified in documentation and stock systems? Yes, the item is listed as M323.G52 (GTIN 4061905068560) and can be referenced directly in inventory and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.53mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Benefit from pinpoint dimensional control with a 16.53 mm diameter test pin in special steel, offering a tight ±0.002 mm tolerance and a compact 50 mm length for reliable end‑measure verification; delivered as a workshop variant in a protective transport case. Order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.G53 — 16.53 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.G53 designed for workshop inspection tasks, providing high‑precision end‑measurement and robust handling in component verification. Diameter 16.53 mm for end‑measure checks 50 mm overall length, workshop design Special steel construction for long life Tight tolerance ±0.002 mm for precise control Precision that shortens inspection cycles The compact geometry of this test pin delivers repeatable measurements for end‑face and hole checks, so inspection routines run faster and with fewer retakes. The ±0.002 mm tolerance represents a high level of dimensional control, allowing confident acceptance or rejection decisions during quality checks. Where frequent gauging is required, tight tolerances reduce downstream rework and contribute to smoother production flow. The special steel construction also supports consistent contact behaviour, preserving accuracy across many cycles. Built for everyday workshop use Engineered as a workshop version, the pin balances wear resistance with practical handling: the 50 mm length gives enough reach for common components while remaining easy to manipulate on a bench or in a fixture. The robust finish resists surface damage during routine handling and storage, maintaining measurement integrity. Supplied in a protective transport case, the pin arrives ready for secure storage and safe transport between inspection stations, minimising the risk of nicks that would compromise results. Simple integration with existing gauges and fixtures The cylindrical form and standard diameter make the pin suitable for slotting into existing inspection set‑ups, plug gauges or custom jigs without adaptation. By standardising on a precise reference component, calibration intervals can be planned more predictably and calibration efforts focused where they add most value. The pin’s compact mass and 0.15 kg weight ease manual positioning, while the consistent surface and diameter support reliable repeatability across multiple measurements. Confidence through verifiable specifications Clear, measurable data underpins trust in the component: the 16.53 mm nominal size, the 50 mm length and the documented ±0.002 mm tolerance are objective criteria that can be recorded in inspection reports. For operations that rely on reproducible end‑of‑line checks or incoming inspection, using a defined reference pin reduces ambiguity and supports traceable quality decisions. The item is listed under the Messstifte category for straightforward identification within quality tooling inventories. Contact Metav Werkzeuge today to order the M323.G53 workshop gauge pin or to request tailored inspection recommendations — Metav Werkzeuge offers practical advice from Emmerich and fast logistical support to industrial workshops and service providers. Technical Data Article number: M323.G53 GTIN: 4061905069390 Label: Prüfstift, einzeln, 16,53 mm Länge 50 mm Facts Diameter: 16.53 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Version: workshop execution Delivery: protective transport case included Category: Messstifte FAQ What is this pin best used for? This gauge pin M323.G53 is intended for precise end‑measure and hole verification tasks in workshop and inspection environments where a compact, robust reference is required. How accurate is the gauge pin? The pin is manufactured to a tolerance of ±0.002 mm, providing tight dimensional control suitable for fine inspection tasks and reliable pass/fail decisions. Is the pin supplied ready for use? Yes, the item is delivered as a workshop variant and comes in a protective transport case to prevent damage during storage and transport. What material is the pin made from and why does it matter? Constructed from special steel, the pin offers good surface stability and wear resistance, which helps maintain measurement integrity over repeated use. Can this pin be used with existing fixtures and gauge blocks? The standard cylindrical form and nominal diameter make the pin compatible with common fixtures and plug‑type gauge set‑ups used in inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.54 mm Gauge Pin Length 50 mm Workshop Version - Metav IndustryLine
Precision gauge pin with ±0.002 mm tolerance and robust special steel construction ensures reproducible end‑dimension checks and long service life; the compact 50 mm length provides practical reach while the supplied transport case protects the pin in workshop use. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. M323.G54 test pin — Single gauge pin, Ø16.54 mm, length 50 mm (Metav IndustryLine) The M323.G54 test pin is a precision gauge pin designed for reliable end‑dimension checks and routine inspection tasks in workshop environments. Workshop version for daily use Precision tolerance ±0.002 mm Diameter 16.54 mm, length 50 mm Supplied in transport case Accuracy that reduces rework and speeds inspection The compact gauge pin offers a tolerance of ±0.002 mm, which positions it for precise end‑dimension verification where reproducibility matters. With a nominal diameter of 16.54 mm, the pin serves as an unambiguous reference for go/no‑go checks, plug gauges and final acceptance tasks. The tight tolerance reduces the need for repeat measurements and downstream rework, delivering a measurable improvement in quality control throughput and process reliability. Durable workshop design for everyday handling Constructed from special steel and specified as a workshop version, this test pin resists routine wear while remaining straightforward to handle. The 50 mm length offers sufficient reach for many component geometries without compromising stiffness; the compact mass (approx. 0.15 kg) keeps handling comfortable and stable. Delivery in a transport case protects the reference surface during storage and movement, preserving the calibration state between uses and extending service life. Practical integration into inspection routines Intended for end‑dimension checks, the pin is easy to incorporate into bench inspection, fixture verification and simple gauge assemblies. As a single test pin it complements sets of incremental pins and can be paired with optical or tactile inspection methods to document conformity. Clear, repeatable checks using this gauge pin support faster decision‑making on the shop floor and help to maintain consistent production quality across shifts. Contact Metav Werkzeuge for tailored advice and immediate supply of the M323.G54 test pin; our team in Emmerich can confirm fitment details, delivery options and suitability for specific inspection tasks Technical Data SKU: M323.G54 GTIN: 4061905069406 Label: Prüfstift, einzeln, 16,54 mm Länge 50 mm Brand: Metav IndustryLine Facts Diameter: 16.54 mm Length: 50 mm Measurement range: 16.54 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Supplied in transport case Category: Gauge pins Intended use: End‑dimension checks FAQ What tolerance does this test pin offer? The M323.G54 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.002 mm, suitable for precise end‑dimension checks. What material is used for the pin? The test pin is made from special steel, giving it the wear resistance expected of a workshop‑grade gauge. Is the pin supplied with protective packaging? Yes — the M323.G54 is delivered in a transport case to protect the measuring surface during storage and transport. What applications is this pin suited to? This gauge pin is intended for end‑dimension checks, plug gauge tasks and routine inspection jobs where a single, precise reference diameter is required. Can this single pin be combined with other gauges? The test pin is a single‑unit gauge and can be paired with other pins or fixtures to create functional checking assemblies for component acceptance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.55mm Gauge Pin, Single, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Combining a 16.55 mm diameter, 50 mm length and a ±0.002 mm runout tolerance, this test pin delivers dependable end‑measure checks in demanding workshop settings; order the item via Metav Werkzeuge or consult our specialists for application guidance. M323.G55 gauge pin — single test pin, 16.55 mm, 50 mm length (Metav IndustryLine) The M323.G55 gauge pin is a single, workshop‑grade test pin designed for precise end‑dimension verification and use in jigs, gauges and inspection fixtures. Workshop version for robust use Diameter 16.55 mm precision fit Length 50 mm in special steel Tolerance ±0.002 mm ensured Reliable end‑measure verification for production control The inspection pin is engineered for repeatable dimensional checks where precision matters. With a nominal diameter of 16.55 mm and a length of 50 mm, the component provides a stable reference for end‑measurements and bore verification. The tight ±0.002 mm specification reduces uncertainty when locating features or checking mating parts, so the pin is suitable for bench inspection and integration in checking fixtures. The solid special steel construction offers consistent contact behaviour and wear resistance under regular use, translating into fewer rejects and clearer quality decisions. Robust workshop execution for everyday handling Built as a workshop version, the test pin tolerates the knocks and handling typical in industrial environments without sacrificing measurement integrity. At a mass of 0.15 kg, the component is easy to position yet substantial enough to remain stable in assemblies and jigs. The straightforward geometry of the pin allows quick seating and removal in plug gauges or fixture pockets, simplifying repetitive checks. Where reproducibility is required on the shop floor, this design balances durability with the fine tolerances needed for reliable pass/fail assessments. Traceability and compatibility with inspection systems The single test pin is supplied as an identifiable article (SKU M323.G55, GTIN 4061905069413), making stock control and documentation straightforward. Its nominal dimensions and narrow tolerance window support interchangeability with other precision pins and gauge elements, facilitating modular fixture design and easy replacement. The product’s workshop specification and clear labelling help maintain process traceability in quality records and support consistent measurement routines in serial production environments. For precision end‑measure tasks, choose the Metav IndustryLine M323.G55 gauge pin and contact Metav Werkzeuge for application advice or to integrate this pin into existing inspection setups. Technical Data Article number: M323.G55 GTIN: 4061905069413 SKU: M323.G55 Material: Special steel Length: 50 mm Diameter: 16.55 mm Weight: 0.15 kg Tolerance: ±0.002 mm Category: Gauge pin Feature: Workshop version Accuracy class: ±0.002 Facts Length (numeric): 50 mm Diameter (numeric): 16.55 mm Weight (numeric): 0.15 kg Tolerance (numeric): ±0.002 mm Eclass: 21170231 Special features Single test pin, plain geometry Designed for end‑measure and bore checks Robust execution for workshop use Clear identification for traceability FAQ What material is the pin made from? The M323.G55 is made from special steel, chosen for wear resistance and stable contact characteristics in inspection tasks. What is the declared tolerance of the test pin? The test pin is specified with a tolerance of ±0.002 mm to support high‑accuracy end‑dimension checks. Can this pin be integrated into inspection fixtures? Yes, the single gauge pin is intended for use in jigs, gauges and fixture pockets and is compatible with modular inspection setups. How is the item identified for ordering and inventory? The product is listed as SKU M323.G55 and GTIN 4061905069413 for easy procurement and stock management. Is the pin suitable for routine shop‑floor checks? The workshop‑grade construction and compact form make the pin well suited to regular shop‑floor inspection operations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.56 mm Gauge Pin 50 mm Length Workshop Version - Metav IndustryLine
Precision ground inspection pin with a Ø16.56 mm gauge and 50 mm shank length provides reproducible go/no-go checks, tight tolerance control and low wear thanks to the special steel construction; order directly via Metav Werkzeuge or consult our technical advisors for application advice. Test pin, single, Ø16.56 mm — 50 mm length (Metav IndustryLine) A Test pin, single, Ø16.56 mm, 50 mm length designed for accurate end‑measure checks and reference gauges in inspection jigs and fixture assemblies Workshop‑grade special steel construction Diameter ground to ±0.002 mm tolerance Compact 50 mm shank for confined fixtures Supplied in a protective transport case Reproducible checks with micrometric tolerance The inspection pin is manufactured for repeatable reference measurements and pass/fail checks. With a ground diameter of Ø16.56 mm and a verified variation of ±0.002 mm, the pin reduces measurement uncertainty in routine inspection tasks and shortens cycle time for quality control. The tolerance level is suitable for precision metrology tasks where dimensional conformity must be demonstrated quickly and consistently, turning manual gauging into a reliable, auditable step in the production flow. Robust workshop design that stands up to handling Built in a workshop specification from special steel, the pin combines surface hardness with dimensional stability to resist wear during repeated seating and insertion. The compact 50 mm shank keeps leverage low for secure mounting in gauge blocks or pockets, while the lightweight construction eases handling and reduces fixture load. For safe transport and protection against impacts, the item is supplied in a protective transport case, preserving the ground finish and ensuring measurements remain reproducible after storage or shipment. Fits integration needs and traceable identification The single test pin suits a range of inspection set‑ups, from simple bench gauges to modular fixture systems. As a dedicated reference element it supports internal inspection loops and batch acceptance testing; the clear article identification simplifies inventory and traceability. For ordering and documentation refer to the Metav IndustryLine designation and SKU for logistic clarity and to match the component exactly to existing gauge plates and holders. For reliable, workshop‑ready measuring elements, request the Metav IndustryLine test pin from Metav Werkzeuge — contact our Emmerich team at info@metav-werkzeuge.com or +49 2822 7131930 to confirm compatibility and delivery options. Technical Data SKU: M323.G56 GTIN: 4061905069420 Material: Special steel Length: 50 mm Diameter: 16.56 mm Accuracy: ±0.002 mm Weight: 0.15 kg Workshop specification Supplied in protective transport case Facts Length: 50 mm Diameter: 16.56 mm Tolerance: ±0.002 mm Weight: 0.15 kg GTIN: 4061905069420 Special features Single test pin Ground gauge diameter Workshop‑grade finish Special steel for wear resistance Protected transport packaging FAQ What is the declared tolerance of the test pin? The Metav IndustryLine test pin has a declared variation of ±0.002 mm for the ground diameter, suitable for tight inspection tolerances. Which material is used for the inspection pin? This Metav IndustryLine single test pin is made from special steel, chosen for dimensional stability and wear resistance in workshop conditions. Is the pin supplied ready for immediate use in fixtures? The test pin is delivered in a protective transport case and ready for mounting in inspection jigs; final seating and clamping practice should follow existing fixture procedures. How is the item identified for ordering and traceability? Order using SKU M323.G56 or GTIN 4061905069420 to ensure exact replacement of the same workshop‑grade test pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com