Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
17.68mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high dimensional fidelity and robust workshop construction to ensure consistent end measurements; the combination of ±0.002 mm tolerance and a 50 mm shaft delivers reliable repeatability in serial checks. Order directly via Metav Werkzeuge or consult the technical team for application guidance. Test pin (gauge pin) — 17.68 mm diameter, 50 mm length | Metav IndustryLine The Test pin, single, 17.68 mm diameter, 50 mm length is a workshop-grade gauge designed for precise end‑measurement and assembly checks in inspection and fixture setups. Workshop-grade construction Diameter 17.68 mm precision Length 50 mm for robust handling Tolerance ±0.002 mm accuracy Reduce rework with measurable accuracy The core advantage of this gauge pin is its high dimensional accuracy: with a declared tolerance of ±0.002 mm, the component supports tight pass/fail decisions during incoming inspection and routine quality control. Such precision reduces the need for rework and rejects by ensuring that mating fits and critical clearances are checked against a dependable reference. The specification is expressed in a way that is directly comparable to drawing tolerances, enabling straightforward use in statistical process control and first-article inspection reports. Built for demanding workshop use Manufactured from special steel, the pin is finished to a hard-wearing surface that resists light impact and everyday handling in production environments. The 50 mm shaft length and a mass of 0.15 kg provide a stable feel that assists secure positioning when checking bore concentricity or end faces. The robust geometry simplifies handling in fixtures and gauging jigs, and the single‑piece supply format supports replacement and spare-part strategies in maintenance stocks. Durability here translates into longer service intervals and fewer calibration cycles. Easy integration into inspection routines This gauge pin is suitable for direct use in go/no‑go checks, plug gauges and bench inspection tasks where a precise cylindrical reference is required. The diameter of 17.68 mm makes it appropriate for verifying medium bore sizes and assemblies where tight clearances matter. Traceability is supported via the SKU and GTIN identifiers, allowing the pin to be logged into asset registers or quality management systems. Where configuration notes are required, provide the SKU M323.H68 for unambiguous procurement and inventory control. Request tailored advice from Metav Werkzeuge in Emmerich on the suitability of the M323.H68 gauge pin for specific inspection tasks or to arrange delivery and documentation Technical data Article number: M323.H68 GTIN: 4061905070082 Weight: 0.15 kg Material: special steel Length: 50 mm Diameter: 17.68 mm Tolerance: ±0.002 mm Facts Mass: 0.15 kg Diameter: 17.68 mm Shaft length: 50 mm GTIN: 4061905070082 Special features Workshop execution Single item delivery SKU: M323.H68 FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.H68 is specified with a tolerance of ±0.002 mm, suitable for fine inspection tasks that require close dimensional control. Is the test pin suitable for use in fixtures and jigs? Yes, the 50 mm shaft and robust construction make this gauge pin appropriate for fixtures, assembly checks and bench gauging in workshop environments. What material is the pin made from and how does that affect use? The pin is produced from special steel, providing wear resistance and dimensional stability under normal workshop conditions. How is the item identified for ordering and inventory? Order and catalogue the product using SKU M323.H68 or GTIN 4061905070082 to ensure accurate procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.69mm Test Pin, Single, 50mm Length, Workshop Finish - Metav IndustryLine
Precision control and workshop durability combine to give a reliable end-measurement solution: a special-steel gauge pin with a ±0.002 mm tolerance and compact 50 mm length for consistent fixture and bore checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists if further specification is required. Gauge pin M323.H69 – single plug gauge, Ø 17.69 mm, 50 mm length A gauge pin, single, 17.69 mm, length 50 mm designed for workshop inspection and end‑dimension verification in production and maintenance environments. Workshop-grade construction Ø 17.69 mm, length 50 mm Tolerance ±0.002 mm Made from special steel Consistent measurement accuracy for routine inspection The compact plug provides repeatable results where small deviations matter. With a declared tolerance of ±0.002 mm, the pin exceeds typical workshop requirements and approaches precision-control levels used for end‑dimension checks. This accuracy reduces measurement uncertainty during quick go/no‑go verifications and contributes to reproducible quality control across batches. The specification is particularly valuable when comparing actual bores or fixture seats to design limits, providing an objective numerical basis for decisions. Durable design that stands up to workshop handling Built as a workshop version, the component combines a short 50 mm length with a stable diameter of 17.69 mm to keep bending and handling error to a minimum. The body is manufactured from special steel, selected for strength under repeated insertion and extraction cycles; this material choice supports long service life under normal shop use. The compact mass and balanced geometry make the item easy to handle during fast inspection routines while maintaining positional stability in jigs and checking fixtures. Practical integration into inspection workflows The pin is supplied with clear identification (GTIN and internal article code) to simplify stock management and traceability in inspection records. At 0.15 kg and with workshop‑orientated dimensions, the part integrates readily into handheld inspection sets or fixed gauge banks. The robust specification supports use for quick bore checks, assembly pre‑inspection and machine set‑up verification. For specification matching or to confirm suitability for a particular fixture, the Metav Werkzeuge team can advise on interchangeability and complementary gauge sets. Contact Metav Werkzeuge today to specify the M323.H69 gauge pin for your inspection routine or to request tailored advice from our measurement specialists in Emmerich. Technical data Article number: M323.H69 GTIN: 4061905070921 Manufacturer: Metav IndustryLine Label: Gauge pin, single, 17.69 mm length 50 mm Facts Diameter: 17.69 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: special steel Category: Gauge pin (Messstifte) FAQ What tolerance does this gauge pin offer? The gauge pin M323.H69 (Metav IndustryLine gauge pin) is specified with a tolerance of ±0.002 mm, suitable for high-precision workshop checks. Is the M323.H69 suitable for bore verification? Yes, the 17.69 mm diameter and robust workshop design make the M323.H69 appropriate for rapid bore and seating checks in fixtures and assemblies. What material is used for this plug gauge? The pin is made from special steel, chosen for durability under repeated inspection cycles and reliable dimensional stability. How heavy is the gauge pin and how does that affect handling? At approximately 0.15 kg, the pin is compact and easy to handle, supporting fast manual checks and good positional control in jigs. How is the part identified for inventory and traceability? The item is listed as M323.H69 with GTIN 4061905070921 to aid stock control and documentation in inspection protocols. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.6mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop-grade robustness and a tight ±0.002 mm tolerance to speed up fit and inspection tasks. Order the part directly via Metav Werkzeuge or get tailored advice from our consultants to ensure the correct gauge selection for production control. Gauge pin, single, 17.6 mm × 50 mm — Workshop version (Metav IndustryLine) A gauge pin, single, 17.6 mm × 50 mm, designed for straightforward end‑measure and fit checks in workshop and inspection applications Workshop-ready construction Diameter 17.6 mm for accurate fit checks 50 mm overall length for compact inspections Special steel with ±0.002 mm tolerance Precision that reduces rework and speeds inspection The gauge pin M323.H60 delivers a reliable reference diameter of 17.6 mm with a specified positional tolerance of ±0.002 mm, making it suitable for dimensional verification where tight clearances matter. In practice, a consistent verification standard reduces false rejections and rework by ensuring mating bores or reference holes are checked against a stable, hardened reference. The compact 50 mm length keeps handling simple while maintaining sufficient engagement for confident fit assessments. Durable design for daily workshop routines Constructed from special steel, this test pin is finished for routine use in busy shop floors. The workshop-ready construction emphasises wear resistance and dimensional stability under regular handling, giving operators a dependable feel during tactile checks. The modest mass (approx. 0.15 kg) and compact geometry allow rapid manual mounting in fixtures or carriers without compromising on runout or concentricity during short inspection cycles. Practical integration into measurement workflows With its standardised diameter and plain cylindrical form, the pin integrates easily into go/no‑go fixtures, bench comparisons and handheld check routines. The defined ±0.002 mm tolerance provides a clear acceptance band for quick sorting tasks, while the simple geometry reduces interpretation effort for operators who perform repetitive checks. Where a traceable identification is required, the SKU and GTIN enable consistent inventory and process documentation. Traceability, identification and application notes The gauge pin is supplied as a single item and is ideal for checking ending dimensions and fit in assembly or repair operations. The workshop execution makes it a pragmatic choice for maintenance departments and production benches that demand repeatable checks without the overhead of complex fixtures. For use in formal calibration loops, supply and documentation options can be discussed with Metav Werkzeuge to match internal quality procedures. Secure reliable fit checks with Metav IndustryLine’s workshop gauge pin — contact Metav Werkzeuge in Emmerich for specification matching and order processing at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H60 GTIN: 4061905071966 Label: Prüfstift, einzeln, 17,6 mm Länge 50 mm Facts Diameter: 17.6 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop version Material: special steel Category: Messstifte FAQ What materials is the gauge pin made from? The gauge pin is manufactured from special steel, selected for wear resistance and dimensional stability in workshop use. Is the dimensional tolerance suitable for precision assembly checks? Yes. The item is specified with a ±0.002 mm tolerance, making it appropriate for many assembly and inspection tasks that require a close fit assessment. Can the pin be used in go/no‑go fixtures or jigs? The cylindrical geometry and standard diameter allow the pin to be incorporated into simple go/no‑go fixtures and bench jigs for rapid acceptance testing. What is the recommended application for the 50 mm length? A 50 mm overall length provides compact engagement for quick end‑measure inspections and for use where long insertion depths are not required. How is the item identified for stock and documentation purposes? The product is listed under SKU M323.H60 and GTIN 4061905071966, which supports consistent inventory control and traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.71mm Gauge Pin 50mm Length Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of precise measuring tolerance, a compact micro class diameter, and a workshop-grade build for reliable end‑measure checks; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single – Ø 17.71 mm, 50 mm length (Metav IndustryLine) The gauge pin, single, 17.71 mm is a workshop-grade inspection pin designed for precise end‑measure verification and assembly gauge work in fine mechanical applications. Workshop-grade construction Diameter 17.71 mm nominal Length 50 mm overall High accuracy ±0.002 mm Precision where it counts for repeatable measurements The inspection pin delivers a high accuracy of ±0.002 mm, making it suitable for tasks that demand reproducible end‑measure checks. Manufactured from special steel, the component resists wear during repeated insertions and provides a stable reference surface. As a compact micro class gauge, the unit is particularly useful in fine mechanical workshops and jigs where short measuring lengths reduce bending and handling error. The close tolerance supports quality control routines and reduces the need for multiple rechecks, improving throughput. Compact format that improves handling and setup time With an overall length of 50 mm and a nominal diameter of 17.71 mm, this single‑piece pin is easy to seat in fixtures and gauges, shortening setup time on assembly stations. Its compact geometry keeps the centre of gravity close to the seating face, which lowers measurement uncertainty compared with longer probes. The straightforward design simplifies mounting and integration into existing checking fixtures, enabling rapid checks during production or inspection sequences and supporting smoother process control. Durable construction for workshop environments The workshop edition is produced from special steel and finished to maintain concentricity and surface integrity under frequent use. The robust material choice and machining quality ensure long service life, so maintenance intervals are extended and replacement frequency is reduced. The product suits applications linked to end‑measure verification or end‑masses, where a reliable, dimensionally stable reference pin is required. Metav IndustryLine’s approach focuses on consistent quality to support industrial workflows. Contact Metav Werkzeuge for technical advice on integrating Metav IndustryLine gauge pins into inspection fixtures or to check current stock and delivery options Technical Data Article number: M323.H71 GTIN: 4061905070945 Manufacturer: Metav IndustryLine Facts Diameter: 17.71 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop edition Category: Gauge pin (Messstifte) Application: End‑measure verification (end masses) FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to an accuracy of ±0.002 mm, offering stable results for end‑measure checks with the Metav IndustryLine single test pin (M323.H71). Is this pin suitable for precision fixture work in fine mechanics? Yes, the component’s compact diameter and 50 mm length place it in the micro class, making it well suited for fine mechanical fixtures and small‑part inspection. What material is the pin made from and how does that affect durability? The pin is made from special steel, chosen for wear resistance and dimensional stability under repeated use in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.72mm Test Pin Workshop Version 50mm Length - Metav IndustryLine
Take advantage of precise dimensional control and workshop-ready robustness: the combination of ±0.002 mm tolerance, 17.72 mm diameter and a compact 50 mm length supports reliable end-dimension checks and quick fixture set-ups. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration advice. Gauge Pin, Single 17.72 mm Ø – 50 mm Length (Metav IndustryLine) The Gauge Pin, Single 17.72 mm Ø is a precision cylindrical gauge designed for fast verification of bore diameters and end dimensions in inspection and production environments. Precision tolerance ±0.002 mm Workshop-ready construction Diameter 17.72 mm, length 50 mm Manufactured from special steel Accurate, reproducible checks for routine inspection A compact cylindrical gauge delivers clear, reproducible results for go/no-go testing and dimensional verification. With a declared tolerance of ±0.002 mm, this pin supports high-precision spot checks that reduce measurement uncertainty and speed up quality control routines. The controlled diameter of 17.72 mm provides a defined reference for verifying bore sizes, while the short 50 mm length allows confident handling in confined fixtures. This combination reduces rework and shortens inspection cycles in production environments. Robust design made for the workshop floor Constructed from special steel, the pin resists wear under frequent use and preserves the critical diameter over repeated cycles. The workshop design emphasises practical handling: the compact form factor is easy to seat in fixtures and quick to exchange during batch checks. Low mass contributes to safe, ergonomic use in manual operations while delivering consistent contact conditions. These attributes make the gauge ideal where durability and repeatability are essential for operational efficiency. Seamless fit into inspection and toolmaking workflows As a standard cylindrical reference, the pin integrates into fixture set-up, tool inspection and final acceptance procedures. Its precise diameter and repeatable geometry support reliable alignment and verification tasks during assembly and jig adjustments. By providing a stable reference for end dimensions, the gauge helps engineers and technicians maintain process capability and reduce stoppages. Metav’s positioning as a precision partner ensures traceable supply and pragmatic advice for industrial application. Contact Metav Werkzeuge for tailored application guidance or to arrange supply of the Metav IndustryLine gauge pin M323.H72 to match specific inspection needs Technical Data Article number: M323.H72 GTIN: 4061905070952 Manufacturer: Metav IndustryLine Core specifications Diameter: 17.72 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials & features Material: special steel Design: workshop execution Type: single gauge pin Category: measuring pins FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a tolerance of ±0.002 mm, providing high-precision dimensional checks for bore and end measurements. Which applications suit this gauge pin? This cylindrical reference is suitable for quick verification of hole diameters, fixture set-up and spot checks in production and inspection workflows. What material is the pin made from? The pin is made from special steel, selected for wear resistance and dimensional stability under frequent use. Can the pin be used for alignment in jigs and fixtures? Yes, the precise geometry and compact length make the pin suitable for alignment and verification tasks in jig and fixture assembly. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.73mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop performance: the gauge pin combines a 17.73 mm reference diameter with a ±0.002 mm tolerance and a 50 mm working length for repeatable end‑dimension checks. Order the item directly via Metav Werkzeuge or consult our specialists for specification matching. Gauge pin M323.H73 — inspection gauge pin, 17.73 mm diameter, 50 mm length — Metav IndustryLine The gauge pin M323.H73 is a single inspection pin designed for accurate end‑measure checks and fit verification in production and workshop metrology. Workshop version for robust daily use Diameter 17.73 mm for precise fit control Tolerance ±0.002 mm for high accuracy Supplied in a protective transport case Accuracy that reduces rejects and avoids rework The core advantage of this inspection pin is its high dimensional accuracy: a nominal diameter of 17.73 mm held to ±0.002 mm provides a reliable go/no‑go reference for mating bores and plug fits. Such a tight tolerance supports consistent process control and reduces the risk of out‑of‑tolerance assemblies, which in turn decreases rework and inspection overhead. The measured stability helps maintain throughput while safeguarding component interchangeability. Durable workshop design for long service life Built as a workshop version, the pin is manufactured from special steel chosen for wear resistance and dimensional stability under routine handling. The 50 mm length gives a practical engagement depth for many end‑dimension checks while keeping the instrument easy to position. The material selection and robust manufacturing process contribute to extended service life and sustained repeatability, helping to lower total cost of ownership in demanding production environments. Practical handling, secure transport and easy inventorying Supplied as a single piece, the pin arrives ready for immediate use and is packaged in a protective transport case to prevent damage in transit. The compact weight and clear identification simplify storage and handling; the included GTIN aids tracing and inventory management. For workshop applications where quick verification is needed, the compact form factor and sturdy finish enable fast, confidence‑inspiring checks at the bench or on the shop floor. Contact Metav Werkzeuge for tailored advice and reliable supply of the Metav IndustryLine gauge pin M323.H73, delivered ready for workshop use Technical data Article number: M323.H73 GTIN: 4061905070969 Description: Gauge pin, diameter 17.73 mm, length 50 mm Material: Special steel Net weight: 0.15 kg Accuracy: ±0.002 mm Packaging: Protective transport case included Core specifications Diameter: 17.73 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop version for daily industrial use Single piece delivery Designed for end‑dimension checks Robust finish for wear resistance FAQ What is the nominal diameter of this gauge pin? The nominal diameter of the gauge pin M323.H73 is 17.73 mm, specified for precise fit control. What tolerance can be expected from the gauge pin? The inspection pin is manufactured to a tolerance of ±0.002 mm, providing high‑precision verification for mating parts. Is the pin ready for immediate use on arrival? Yes — the Metav IndustryLine gauge pin M323.H73 is supplied as a single piece in a protective transport case and is ready for workshop inspection tasks. Which materials is the pin suitable to check? The pin serves as a dimensional reference for metallic and machined components where a 17.73 mm reference is required; it is made from special steel for durability and stable measurement results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.74mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Precision pairing of a 17.74 mm nominal diameter with a tight ±0.002 mm tolerance provides dependable gauging for workshop and light production use; the 50 mm length and special steel construction ensure robust handling and repeatable fits. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 17.74 mm, 50 mm length — Workshop version, ±0.002 mm accuracy (Metav IndustryLine) Gauge pin, single, 17.74 mm, 50 mm length is a precision inspection pin intended for end‑size checks, go/no‑go gauging and fit verification in workshop and small‑series production environments Diameter 17.74 mm nominal fit Tight tolerance ±0.002 mm 50 mm length, workshop execution Made from special steel Consistent end‑size control for repeatable production results The Gauge pin, single, 17.74 mm, 50 mm length combines a precisely ground nominal diameter with a verified ±0.002 mm tolerance to support repeatable acceptance tests and fit verification. In practical terms, the close tolerance reduces rework by making go/no‑go judgements reliable and consistent. The pin's geometry and surface finish deliver stable contact conditions, which helps to minimise measurement scatter when used for final dimensional checks or as a reference plug in assembly procedures. Durable construction that withstands workshop handling Built in a workshop specification and manufactured from special steel, the pin provides improved wear resistance and dimensional stability under everyday use. The 50 mm shank gives sufficient engagement for secure probing without compromising access in confined gauges or fixtures. The balanced mass and compact form make the component easy to handle on the shop floor while its robust finish reduces the risk of surface damage that can affect fit and longevity. Practical integration, traceability and process benefit As a single inspection pin intended for direct use in quality routines, this pin simplifies routine checks and reduces cycle time during end‑of‑line inspection. Identification by SKU and GTIN supports traceability in production records and enables structured tool‑management. Combined with Metav’s market position as a precision distributor, the item is suitable where reliable gauging, simple handling and clear traceability are required for process control and supply‑chain documentation. For workshop‑grade accuracy from the Metav IndustryLine range and assistance with selection or application, contact Metav Werkzeuge for tailored advice and order guidance Technical data Article number: M323.H74 GTIN: 4061905070976 Category: Gauge pins Core specifications Diameter: 17.74 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Single pin delivery Label: Prüfstift / gauge pin FAQ What is the declared tolerance for this gauge pin? The inspection pin is specified with a tolerance of ±0.002 mm, which ensures tight dimensional control for fit verification and go/no‑go checks. Is this pin suitable for workshop use and daily handling? Yes, the workshop execution and special steel construction make the pin appropriate for routine use in workshop and light production environments. Which dimensions identify this part for ordering and traceability? The pin is identified by SKU M323.H74 and GTIN 4061905070976; these references support ordering and inventory tracking for the gauge pin. Can the pin be used as a reference for assembly and final inspection? The pin is designed for end‑size checks and fit verification, providing a reliable reference when used within its specified tolerance and engagement length. What advantages does the Metav IndustryLine version offer? The Metav IndustryLine version combines workshop‑ready robustness with controlled tolerances and supply‑chain traceability, making it a pragmatic choice for production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.75mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the precise ±0.002 mm tolerance, the Ø17.75 mm diameter and the robust special steel construction for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or contact our consultants for batch supply and specification support. M323.H75 gauge pin — single test pin, Ø17.75 mm, 50 mm length The M323.H75 is a single gauge pin designed for precise end‑measurement and fit verification in workshop and inspection environments, supplied in a protective case for safe transport and storage. Precision tolerance ±0.002 mm Diameter Ø17.75 mm, length 50 mm Made from special steel Delivered in protective case Engineered for repeatable precision in inspection tasks The measuring pin is manufactured and finished to a tolerance of ±0.002 mm, which ensures consistently repeatable results when verifying bores, gauges and assembly fits. This level of accuracy places the component in the high‑precision segment of workshop gauging tools and reduces rework rates by narrowing the uncertainty of a single pass test. The tight tolerance is combined with a true cylindrical form and smooth finish, so the pin seats reliably in mating features without introducing measurement artefacts; this supports efficient, evidence‑based quality control and shortens inspection cycles. Robust material and safe handling for daily workshop use Constructed from special steel, the pin offers enhanced wear resistance and dimensional stability under routine use. The workshop version specification reflects practical design choices: short, balanced geometry for easy manual handling and a surface finish that tolerates regular cleaning and light lubricants. Delivery in a protective case preserves the gauge geometry during transport and storage, preventing nicks that would compromise accuracy. Together these attributes make the pin a low‑maintenance, long‑service solution for repetitive fit checks. Fits smoothly into production and inspection workflows As a compact, single‑piece gauge pin, the item integrates with standard inspection benches and manual checking procedures; its form factor is ideal for quick pass/fail assessments and setup confirmations. The clear dimensional designation simplifies inventory picking and traceability in statistical process control (SPC) routines. For customised kit composition or recurring supply contracts, Metav IndustryLine offers tailored advice to align batches with inspection frequency and traceability requirements — technical consultants can advise on quantities, storage and handling to optimise uptime and measurement confidence. Contact Metav Werkzeuge today to discuss batch availability of the Metav IndustryLine M323.H75 gauge pin or to request a recommendation matched to specific inspection tolerances Technical data SKU: M323.H75 GTIN: 4061905070983 Category: Gauge pins (Messstifte) Label: Gauge pin, single, Ø17.75 mm, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 17.75 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Delivered in protective case for transport and storage High concentricity and smooth finish for repeatable seating FAQ What inspection tasks is this gauge pin suited for? The M323.H75 gauge pin is intended for end‑measure checks, bore verification and fit testing where a precisely defined cylindrical reference of Ø17.75 mm and ±0.002 mm tolerance is required. Is the pin suitable for continuous workshop use? Yes, the workshop‑grade construction and special steel material make the M323.H75 robust for daily use; the protective case helps prevent handling damage that could affect accuracy. How should the gauge pin be stored to maintain accuracy? Store the M323.H75 in its protective case in a clean, dry environment and avoid contact with corrosive agents; periodic visual checks for nicks or wear are recommended to preserve measurement reliability. Can this gauge pin be supplied in larger quantities for production lines? Bulk supply of the M323.H75 is available; Metav IndustryLine can advise on batch sizing and traceability options to match production‑line inspection schedules. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.76mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of industrial robustness, tight tolerance and compact handling for reproducible end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.H76 — 17.76 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.H76 is a single precision test pin made from special steel, designed for reliable end‑dimension verification and workshop measurement tasks. Workshop version for robust daily use Diameter exactly 17.76 mm for end‑dimension checks Length 50 mm for compact gauge setups Tolerance ±0.002 mm for tight precision Consistent fit for end‑dimension verification The gauge pin offers a defined cylindrical reference with 17.76 mm nominal diameter and a verified tolerance of ±0.002 mm, making it suitable for high‑confidence verification of bore and shaft end dimensions. Such a tolerance level converts into measurable repeatability during sample checks and pass/fail inspections; the narrow ±0.002 mm band reduces ambiguity when comparing measured values to drawing limits. For workshop quality control and batch sampling, this precision supports faster decisions and fewer remeasurements, so inspection throughput improves without sacrificing accuracy. Durable construction that suits daily workshop use Built as a workshop version, the test pin is manufactured from special steel to resist wear during frequent engagement with fittings and gauges. The compact 50 mm length balances accessibility and stiffness, keeping handling straightforward while limiting deflection in confined fixtures. The modest mass (0.15 kg) makes the pin easy to install into test assemblies or holding devices, while the robust material choice prolongs service life and reduces replacement intervals — a practical advantage where uptime and tool longevity matter. Seamless integration into inspection routines and inventory The item is supplied individually and labelled for easy identification in toolrooms and stores; traceability is supported by the SKU and GTIN for stock management. As a dedicated cylindrical reference, it complements handheld callipers, bore gauges and go/no‑go systems, accelerating setup for end‑dimension checks and calibration tasks. Using a standardised gauge pin reduces setup variation between operators and equipment, which in turn streamlines quality documentation and supports consistent production outcomes. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and technical advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M323.H76 GTIN: 4061905071607 Label: Prüfstift, einzeln, 17,76 mm Länge 50 mm Core specifications Diameter: 17.76 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Features / Material Material: special steel Version: workshop execution Application: end‑dimension checks Category: gauge pin (Messstifte) FAQ What diameter and length does the pin have? The gauge pin M323.H76 from Metav IndustryLine has a nominal diameter of 17.76 mm and a working length of 50 mm (SKU M323.H76). What precision can be expected from this test pin? The test pin is specified with a tolerance of ±0.002 mm, making the M323.H76 suitable for tight end‑dimension verification tasks in workshop and inspection environments. Is the pin suitable for frequent workshop use? Yes, the workshop version of this gauge pin is made from special steel and is designed for robust daily handling and repeated engagement in measuring setups. Is the item supplied individually or as part of a set? This product is supplied individually; the label indicates a single gauge pin for straightforward replacement or targeted use. Which measurement tasks is this pin intended for? The M323.H76 is intended primarily for end‑dimension checks and as a cylindrical reference in inspection routines, complementing callipers, bore gauges and go/no‑go tests. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.77mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of high reproducibility through a fine manufacturing tolerance and the robust special‑steel construction for reliable end‑dimension checks; the 17.77 mm diameter and 50 mm overall length ensure stable handling in inspection fixtures. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.H77 — single precision test pin, 17.77 mm × 50 mm (Metav IndustryLine) The gauge pin is a single, precision test pin designed for end‑dimension verification and fixture use in workshop and inspection settings. 17.77 mm diameter, 50 mm length ±0.002 mm manufacturing tolerance Special steel for workshop durability Precision for repeatable inspection tasks The workshop‑grade test pin delivers fine repeatability thanks to a manufacturing tolerance of ±0.002 mm, making it suitable for dimensional verification where small deviations matter. A diameter of 17.77 mm combined with a 50 mm overall length provides a compact but stiff probing geometry that reduces lateral flex and improves the reproducibility of seating and alignment checks. Measurements that rely on consistent contact surfaces benefit from the stable geometry, so inspection jigs and go/no‑go fixtures can operate with predictable results and lower scrap rates. Robust construction that stands up to daily use Constructed from special steel in a workshop version finish, the pin resists wear during repeated insertion and withdrawal cycles and keeps the measuring surface intact over time. The slightly weighted design aids handling in manual setups while maintaining a compact footprint for multi‑pin arrays and gauge blocks. The material choice and craftsmanship support long service intervals and reduced rework for maintenance teams, translating into less downtime and a steadier throughput in routine quality control. Easy integration into metrology processes As a single‑piece test pin, the component is ready for immediate integration into inspection fixtures, locating systems and custom gauges. The clear specification of 17.77 mm diameter and the documented ±0.002 mm tolerance simplify planning for fitting and clearance in assemblies. Traceability is supported by the listed SKU and GTIN, facilitating inventory control and replacement planning within established procurement workflows. Supply from a recognised brand streamlines sourcing and helps maintain a consistent quality filter across production lines. For reliable end‑dimension verification choose Metav IndustryLine’s M323.H77 via Metav Werkzeuge for assured supply and technical guidance Technical data Article number: M323.H77 GTIN: 4061905071614 Brand: Metav IndustryLine Label: Gauge pin, single, 17.77 mm diameter, 50 mm length Material: Special steel Core specifications Diameter: 17.77 mm Length: 50 mm Manufacturing tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop execution Single test pin for end‑dimension checks Compact geometry for reduced lateral flex FAQ What are the exact dimensions of this gauge pin? The gauge pin M323.H77 has a diameter of 17.77 mm and an overall length of 50 mm. What tolerance can be expected from the pin? A manufacturing tolerance of ±0.002 mm is specified for the M323.H77, supporting fine repeatability in inspection tasks. Which material is the pin made from? The pin is made from special steel and specified as a workshop execution for enhanced durability. Is the pin intended for fixture and gauge integration? Yes; the single, compact design of the test pin is intended for use in inspection fixtures, locating systems and custom gauges. How is traceability handled for ordering and inventory? Traceability is supported via the SKU M323.H77 and GTIN 4061905071614 for straightforward procurement and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.78mm Test Pin Single 50mm Length Workshop Version - Metav IndustryLine
Taking advantage of a compact gauge pin with a precise 17.78 mm diameter, robust special steel construction and a practical 50 mm length ensures reliable end‑dimension checks and consistent workshop performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 17.78 mm · 50 mm length (Metav IndustryLine) A single gauge pin designed for precise end‑dimension inspection in workshop and production environments, combining a compact form with workshop‑grade durability. Workshop version for robust daily use 17.78 mm diameter for end‑dimension checks 50 mm length for recessed measurements Manufactured from special steel Precision where it matters: accurate end‑dimension checking The compact design delivers a controlled contact surface for repeatable end‑dimension verification, with a stated accuracy of ±0.002 mm that supports fine measurement tasks. The hardened contact area and the reduced form‑tolerance minimise deformation during use, so the pin keeps true to nominal size across many cycles. For production sampling or fixture set‑up, the consistent geometry reduces rework and shortens inspection time while maintaining traceable measurement results. Built for workshops: rugged materials and handling benefits Constructed from special steel, this workshop‑grade pin tolerates the knocks and handling of daily use without sacrificing measurement integrity. The 50 mm shank provides sufficient reach for recessed or countersunk bores while remaining easy to locate and position in tight setups. Delivery in a protective case included simplifies transport and safeguards the gauge pin during storage, reinforcing a dependable tool life in busy environments. Workflow advantages: simple, fast integration into inspection routines The single‑piece configuration fits standard gauge pin holders and inspection jigs and is suitable for rapid go/no‑go checks as well as comparative measurements on fixtures. Its compact footprint supports efficient handling in batch inspection and reduces cycle time when checking multiple parts. The combination of small diameter and workshop robustness makes this item particularly useful for end‑dimension control during assembly, maintenance and quality spot checks. Quality assurance and traceability The item is supplied with clear identification (SKU M323.H78, GTIN 4061905071621) to support inventory control and traceability in quality documentation. Weight and dimensions are minimal, aiding straightforward integration into tool drawers and measurement sets, while the workshop design aligns with common industrial inspection practices, ensuring compatibility with existing metrology workflows. For reliable end‑dimension control choose the Metav IndustryLine gauge pin M323.H78 — contact Metav Werkzeuge for technical clarification or to place an order, and benefit from local stock and application advice. Technical data Article number: M323.H78 GTIN: 4061905071621 Brand: Metav IndustryLine Category: Gauge pins Facts Diameter: 17.78 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Single test pin Delivery in protective case FAQ What tolerances can be expected with this gauge pin? The Metav IndustryLine gauge pin M323.H78 is specified with an accuracy of ±0.002 mm, making it suitable for fine inspection tasks and reliable end‑dimension checks in workshop environments. Is the gauge pin suitable for recessed bores? Yes, the 50 mm length provides reach for recessed or partially blind bores while the compact diameter enables precise seating and verification of end dimensions. What material is the pin made from and how does that affect durability? The pin is manufactured from special steel, chosen for wear resistance and robustness under workshop conditions, which helps preserve nominal dimensions through repeated use. Can this pin be used in fixture set‑ups and quick go/no‑go checks? Its single‑piece design and workshop specification make the M323.H78 well suited for integration into fixture set‑ups and rapid go/no‑go inspections where consistent contact geometry is required. How is the gauge pin delivered and how should it be stored? The gauge pin is supplied in a protective case to simplify transport and reduce risk of damage; dry, organised storage in the case is recommended to maintain measurement accuracy. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.79mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Reliable workshop inspection: the combination of a precise 17.79 mm diameter, ±0.002 mm tolerance and a robust 50 mm overall length ensures repeatable end‑dimension checks and dependable fit control. Order the inspection pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.H79 – inspection pin, 17.79 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.H79 is a single inspection pin designed for precise end‑dimension checks in workshop applications, providing a compact, stable reference for go/no‑go and fit verifications. Precision diameter 17.79 mm Workshop grade special steel 50 mm overall length for end‑measure checks Precise control for repeatable end‑dimension checks The inspection pin offers a defined diameter of 17.79 mm with a measured tolerance of ±0.002 mm, making it suitable where tight clearance and consistent fit are critical. The small form factor gives low flex under contact pressure, so the component interaction remains stable during repeated measurements. This results in faster quality decisions and reduced rework in assembly or incoming inspection operations, because each insertion delivers a reliable go/no‑go indication. Durable construction for everyday workshop use Manufactured from special steel in a workshop specification, the pin resists wear and maintains its critical diameter over many cycles. The 50 mm overall length supplies enough engagement for end‑measure verification without adding unnecessary handling weight, while the robust finish tolerates standard workshop conditions. The result is a practical instrument that blends longevity with low maintenance, suitable for both bench checks and use in simple gauge fixtures. Practical measurement benefits and ease of integration The single‑piece design simplifies storage and identification in inspection sets and fixtures. With low mass and compact dimensions, the pin integrates into existing plug‑gauge rigs and checking stations without modification. Its tight tolerance supports reliable tolerance stacking analysis during assembly trials, enabling production engineering teams to validate fits quickly and document acceptance criteria with confidence. Ideal for fine mechanical and workshop applications Classified in the micro range for small‑part inspection (max range 10–100 mm), this inspection pin is especially well matched to precision fitting tasks in toolmaking, small‑batch assembly and end‑of‑line checks. The combination of repeatability and minimal setup time supports throughput improvements while preserving measurement integrity — a pragmatic balance between workshop convenience and laboratory‑grade precision. For dependable end‑dimension verification choose the Metav IndustryLine inspection pin from Metav Werkzeuge; contact our advisors at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance and order support Technical data Article number: M323.H79 GTIN: 4061905071638 Label: Prüfstift, einzeln, 17,79 mm Länge 50 mm Facts Diameter: 17.79 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version (Werkstatt‑Ausführung) Material: special steel Single inspection pin for end‑measure checks Suitable for precision go/no‑go and fit verification FAQ What is the declared tolerance of this inspection pin? The inspection pin M323.H79 is specified with a tolerance of ±0.002 mm, providing high repeatability for fit and clearance checks. Can this pin be used for routine assembly inspection in a workshop? Yes, the Metav IndustryLine inspection pin is designed as a workshop version, combining durable special steel construction with a compact 50 mm length for practical routine checks. Is the diameter exactly 17.79 mm for gauging nominal fits? The nominal diameter is 17.79 mm; the pin is manufactured and inspected to meet the stated tolerance of ±0.002 mm for dependable gauging performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.7mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Combine precision tolerance ±0.002 mm, robust special steel construction and a compact 50 mm length for repeatable end‑measure checks in workshop environments; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin, single, 17.7 mm diameter, 50 mm length (Metav IndustryLine) Test pin, single, 17.7 mm, 50 mm length is a compact inspection component for dimensional verification, designed for fixture set‑up, end‑measure controls and workshop quality checks. Workshop‑grade special steel Precision tolerance ±0.002 mm 17.7 mm diameter, 50 mm length Reliable accuracy for routine inspection The compact inspection component delivers a tolerance of ±0.002 mm, making it suitable for tasks where small deviations matter. The controlled tolerance reduces uncertainty in go/no‑go assessments and comparative checks, so measurement routines become more predictable. Built for frequent use, this type of gauge pin offers consistent contact geometry that simplifies repeatability in bench checks and fixture validation, translating into fewer reworks and clearer pass/fail decisions. Robust make for everyday workshop use Manufactured from special steel, the pin resists wear under regular contact with common shop surfaces while maintaining dimensional stability. With a 50 mm shank and a 17.7 mm diameter, the component balances stiffness and handling: the length is short enough to limit bending yet long enough for secure clamping in fixtures. Its workshop‑grade execution means the component tolerates routine handling, making it a pragmatic choice for production environments and service benches where durability and straightforward use are priorities. Practical compatibility and handling advantages The cylindrical design supports standard holding methods in inspection jigs, alignment tools and transfer fixtures. The compact weight (approx. 0.15 kg) and round profile ease insertion and removal during batch checks and single‑piece verification. Where interchangeability matters, the precise diameter and consistent surface ensure reliable seating in mating bores or reference blocks. This inspection tool is therefore well suited to applications in general metalwork, toolrooms and maintenance operations that require fast, reproducible dimensional checks. Traceability and supply reliability for production workflows Supplied as a single item designed for day‑to‑day measurement tasks, the pin is identified by SKU M323.H70 and a GTIN for inventory control and procurement. Metav’s European distribution from Emmerich provides a quality filter for industrial buyers seeking dependable sourcing and stock continuity. Combining measurable accuracy, resilient material choice and compact geometry, this inspection pin supports stable process control without adding complexity to established inspection routines. Select the Metav IndustryLine test pin for dependable workshop measurement and contact Metav Werkzeuge in Emmerich for technical details and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H70 GTIN: 4061905070938 Manufacturer: Metav IndustryLine Facts Diameter: 17.7 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Delivery: single test pin Version: Workshop execution FAQ What is the primary use of this gauge pin? The gauge pin M323.H70 is intended for dimensional verification, end‑measure checks and fixture set‑up in workshop and production inspection routines. Is the diameter suitable for seating checks and alignment? Yes, the 17.7 mm diameter provides a defined contact surface for seating checks, alignment tasks and compatibility with mating bores in fixtures. Can this pin withstand frequent handling in a production environment? The workshop execution and special steel construction of the pin are designed for regular use and maintain dimensional stability under standard handling conditions. How is the component identified for procurement and inventory? Identification is via SKU M323.H70 and GTIN 4061905070938, which supports ordering, stock control and traceability. Is the pin supplied as an individual item or in sets? This product is supplied as a single test pin, suitable for replacement or addition to existing inspection kits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.81mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Achieve reliable end‑gauging with ±0.002 mm tolerance, durable special steel construction and a compact 50 mm overall length for consistent inspection results. Order the gauge pin directly via Metav Werkzeuge or consult their advisors for application support and matching workshop equipment. Gauge pin 17.81 mm — single gauge pin, 50 mm length, workshop grade (Metav IndustryLine) A gauge pin 17.81 mm engineered for precise end‑measurement and quick go/no‑go checks in workshop and inspection environments Precision tolerance ±0.002 mm Special-steel workshop design 50 mm overall length, 17.81 mm diameter Consistent dimensional control for routine inspection The compact pin is specified with a tolerance of ±0.002 mm, which places it in the category of high‑precision gauge elements for workshop inspection. This level of accuracy ensures repeatable end‑measurements and reliable pass/fail checks when used in gauges, fixtures or with comparison mandrels. By specifying the exact diameter of 17.81 mm and a controlled length of 50 mm, the pin reduces ambiguity in measurement protocols and supports efficient quality decisions without elaborate setup procedures. Durable design suited to workshop handling Manufactured in special steel and labelled as a workshop execution, the pin is intended to withstand regular handling and insertion into test rigs. The material choice and single‑piece construction provide mechanical stability and reduced surface distortion under standard use. The modest mass of 0.15 kg aids handling and positioning while maintaining sufficient inertia to sit securely in fixtures. These attributes translate to lower downtime for replacements and predictable service intervals in production or inspection loops. Practical integration into metrology workflows This gauge element is intended for end‑measurement tasks, seating as a reference or master pin in bench testing and alignment procedures. The plain geometry and clearly stated dimensions allow straightforward incorporation into go/no‑go setups, depth checks and comparative trials. Because the specification is concise and comparable, procurement and inventory management benefit from unambiguous labelling and rapid cross‑referencing with drawing tolerances and inspection plans. Benefits for production and quality assurance Using a defined gauge pin reduces measurement scatter and supports traceable decision making across repetitive operations. The combination of a precise diameter, workshop robustness and compact 50 mm length is particularly suited to small to medium assemblies where spatial constraints demand short gauge elements. When paired with stable fixtures, the pin contributes to faster inspection cycles and fewer rework instances, supporting overall process efficiency and quality consistency. Contact Metav Werkzeuge for application advice and to source Metav IndustryLine gauge pins for precise workshop inspection needs. Technical data Article number: M323.H81 GTIN: 4061905449123 Manufacturer: Metav IndustryLine Data Diameter: 17.81 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop execution Single gauge pin, individual item Accuracy class: high‑precision inspection element FAQ What level of accuracy does this gauge pin provide? The gauge pin is specified with an accuracy of ±0.002 mm, making it suitable for high‑precision workshop inspection and repeatable end‑measurement tasks. Is the material corrosion‑resistant? The pin is made from special steel and supplied in a workshop execution; surface behaviour depends on the specific steel alloy and shop conditions—appropriate storage and handling are recommended for longevity. Can this gauge pin be used in go/no‑go fixtures? Yes, the gauge pin with a defined diameter of 17.81 mm and 50 mm length is suited for use as a master or reference element in go/no‑go fixtures and alignment jigs. What is the SKU and brand for ordering? The item is listed as SKU M323.H81 and supplied under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.82mm Test Pin, Single, 50mm Length, Special Steel, Workshop Version - Metav IndustryLine
Take advantage of the combination of pinpoint 17.82 mm nominal diameter, ±0.002 mm accuracy and robust special steel construction for reproducible end‑measurement checks in routine inspection. Order the test pin directly via Metav Werkzeuge or consult our advisers for specification matching. M323.H82 Test pin (single) — 17.82 mm diameter, 50 mm length A M323.H82 test pin designed as a workshop‑grade gauging pin for precise end‑measurements and fit checks in component inspection and quality control. Workshop‑grade build for daily inspection Nominal diameter 17.82 mm Tight tolerance ±0.002 mm Precision where repeatability matters The instrument is a dedicated gauge pin specified to a nominal diameter of 17.82 mm with a stated variation of ±0.002 mm, making it suitable for tight tolerance checks and pass/fail verifications in production. The small footprint and fixed 50 mm length deliver a stable contact geometry that reduces measurement scatter; the defined contact surface gives clear, reproducible reference points for end‑of‑line inspection. Presented as a single‑piece test pin, the component supports straightforward integration into manual or fixture‑based gauging routines, where repeatability and traceable dimensions are the priority. Designed for robust workshop inspection Built as a workshop‑grade tool from special steel, the pin resists routine wear and maintains its nominal diameter across many inspection cycles. The material choice and machining tolerance translate into reliable surface quality and hardness that reduce scoring and minimise measurement drift during frequent use. For applications such as bore verification, alignment checks and final dimensional control, the tool provides a rugged, low‑maintenance option that supports consistent results without the complexity of adjustable gauges. Practical handling and measurement benefits The single‑pin format simplifies handling and storage while providing a clear metrological function for end‑measurement tasks. Its compact length and defined shank make it easy to align in jigs or to use as a master reference in comparative checks. The product's straightforward geometry eases operator training and speeds routine inspections, improving throughput where cycle time and repeatable quality are essential. Where traceability or batch matching is needed, the clear nominal and tolerance data support documentation and quality records. For reliable end‑measurement control choose the Metav IndustryLine M323.H82 test pin — contact Metav Werkzeuge in Emmerich for order details and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.H82 GTIN: 4061905449130 eClass: 21170231 Label: Test pin, single, 17.82 mm, length 50 mm Category: Messstifte / Gauge pin Facts Nominal diameter: 17.82 mm Length: 50 mm Weight: 0.15 kg Accuracy/variation: ±0.002 mm Material: Special steel Special features Workshop version (Werkstatt‑Ausführung) Single test pin configuration Intended for end‑measurement and fit checks Suitable for routine inspection and fixture use FAQ What is the nominal diameter and tolerance of the pin? The M323.H82 test pin has a nominal diameter of 17.82 mm with a stated variation of ±0.002 mm, specified for precise end‑measurement tasks. Which material is used for this gauge pin? This gauge pin is manufactured from special steel, selected to provide wear resistance and stable contact geometry for repetitive inspection. For which inspection tasks is this pin suitable? Typical uses include bore verification, alignment checks, fit and end‑measurement controls in workshop and production environments where a fixed, repeatable reference is required. Can this test pin be used in a gauging fixture or jig? Yes. The single‑piece construction and defined 50 mm length make the pin well suited for integration into fixtures and manual inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.83mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, exact tolerance ±0.002 mm and a compact form factor to secure consistent end‑measure inspections. Order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test Pin M323.H83 — workshop test pin, Ø 17.83 mm, 50 mm length (Metav IndustryLine) A Test Pin M323.H83 designed for precise end‑measure checks and robust use in workshop fixtures and gauge assemblies. Workshop version for daily industrial use Diameter 17.83 mm for accurate fits Length 50 mm for stable seating Tolerance ±0.002 mm for high precision Repeatable accuracy for end‑measurement tasks The pin is specified with a tolerance of ±0.002 mm, delivering a level of repeatability that supports reliable end‑measure inspections and dimensional checks. Such precision reduces uncertainty in comparative measurements and helps maintain process stability when used in plug gauges, comparator set‑ups or fixture alignment. The combination of a fine tolerance and compact geometry translates into measurable time savings during routine inspection cycles and fewer rejects downstream. Robust design for everyday workshop use Built as a workshop version from special steel, the pin balances wear resistance with dimensional stability. The Ø 17.83 mm diameter and 50 mm length provide a stable seating in holders and jigs while remaining compact enough for tight assemblies. The robust material choice ensures consistent contact behaviour under repeated usage, keeping surface interaction predictable and minimising profile wear over time. Delivery includes a dedicated transport case to protect the pin during storage and transit. Practical integration and traceability in production Intended for use in end‑measure control, fixture verification and go/no‑go checks, this pin integrates smoothly into existing inspection routines thanks to its standard geometry and clearly referenced identifiers. The item is listed under SKU M323.H83 and GTIN 4061905449147, supporting inventory management and traceability in procurement records. Wherever precise plug‑type probes are required for alignment or comparative gauging, the compact construction and defined tolerance make this pin a dependable option for workshop and light industrial environments. For secure supply of workshop‑grade test pins and practical advice, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 — Metav IndustryLine stock and consultancy available Technical Data SKU: M323.H83 GTIN: 4061905449147 Description: Test pin, single, Ø 17.83 mm, 50 mm length Core specifications Diameter: 17.83 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials & Features Material: Special steel Workshop version Delivery in transport case FAQ What is the declared tolerance of this test pin? The declared tolerance for the Test Pin M323.H83 is ±0.002 mm, suitable for precise comparative measurements and end‑measure checks. Which materials is the pin suitable for when used in fixtures? The test pin is manufactured from special steel and is intended as a robust contact element for typical workshop fixtures and gauge assemblies. Is the pin delivered protected for transport and storage? Yes, the Test Pin M323.H83 is supplied with a transport case to protect the component during transit and storage. Can this pin be used in comparator set‑ups and go/no‑go gauges? The pin’s geometry and tolerance make it appropriate for comparator stations and plug‑type gauge arrangements where stable seating and repeatable contact are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.84mm Gauge Pin, 50mm Length, Workshop Version - Metav IndustryLine
Combine precision (±0.002 mm), workshop-grade durability and compact dimensions for consistent end‑measurement results; order the gauge pin directly via Metav Werkzeuge or request advice from our consultants if required. Gauge pin M323.H84 — 17.84 mm diameter, 50 mm length (Metav IndustryLine) A Gauge pin M323.H84 designed as a workshop‑grade end‑measurement pin for checking bore dimensions and finish tolerances in precision assembly and tool rooms Workshop version: robust construction Diameter 17.84 mm for end‑gauging Tolerance ±0.002 mm high precision Supplied in protective transport case Repeatable, high‑precision end measurements The measuring pin is intended for repeatable verification of end dimensions and bore sizes where small deviations matter. With a nominal diameter of 17.84 mm and a declared runout tolerance of ±0.002 mm, the pin delivers the kind of dimensional stability required for final checks and comparative gauging. The 50 mm shank length provides adequate contact area for stable positioning while remaining compact for confined setups. The quoted accuracy places this instrument firmly in the micro‑measurement domain, making it suitable when fine tolerances determine part acceptance. Workshop‑ready design for everyday handling Built as a workshop version, the pin combines a compact form with handling features that reduce set‑up time on the shop floor. Manufactured from special steel, the component resists wear during repeated insertions and removals, supporting longer service life under normal workshop conditions. The single‑piece delivery format simplifies stockkeeping and traceability; the item is supplied in a protective transport case to prevent damage in transit and to keep the measuring face clean between uses. At 0.15 kg the pin is easy to manoeuvre and store alongside common inspection tools. Integrates into production and inspection workflows The measuring pin is intended as a practical tool for machine shops, tool rooms and quality control stations that require quick, reliable end‑gauging. As a precision end mass for verification tasks, it pairs naturally with handheld measuring instruments such as precision calipers and micrometres for secondary checks. The compact geometry shortens measurement cycles and reduces fixturing complexity, supporting faster throughput without sacrificing repeatability. As part of the Metav IndustryLine offering, the component benefits from centralised supply and consistent product documentation for streamlined procurement. For ordering or technical clarification about the M323.H84 gauge pin, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for tailored advice on integration and delivery. Technical data Article number: M323.H84 GTIN: 4061905449154 Label: Prüfstift, einzeln, 17,84 mm Länge 50 mm Core measurements Nominal diameter: 17.84 mm Length: 50 mm Tolerance / runout: ±0.002 mm Weight: 0.15 kg Materials & features Material: special steel Version: workshop execution Delivery: single gauge pin in protective transport case Category: gauge pins Application: end measurement / bore checking FAQ What measurement accuracy can be expected from this gauge pin? The declared runout tolerance for the M323.H84 gauge pin is ±0.002 mm, which supports tight end‑measurement requirements in precision inspection tasks. Is the pin suitable for fine mechanical or watchmaking applications? With a nominal diameter of 17.84 mm and a compact 50 mm length, the pin falls into the micro measurement class and is appropriate for fine mechanical checks where space and repeatability are critical. What material is used and how does it affect service life? The M323.H84 is made from special steel, a choice that provides workshop‑grade durability under frequent use and helps maintain dimensional stability over repeated cycles. How is the gauge pin supplied and protected during transport? The pin is supplied as a single item and is delivered in a protective transport case to prevent damage and contamination during storage and shipping. Which inspection tools pair well with this gauge pin? The pin is designed for use with precision calipers and micrometres for comparative and secondary measurements; it is ideal where a fixed end mass simplifies set‑up and repeatability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.85mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of high repeatability and compact handling: the precise diameter and tight tolerance ensure reliable seating and end‑measure checks in routine inspection tasks. Benefit from a rugged single‑piece design and short length for low deflection and fast fixture checks. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single, 17.85 mm diameter, 50 mm length — Metav IndustryLine A gauge pin, single, 17.85 mm diameter, 50 mm length designed for quick seating verification and end‑measurement control in workshop and production inspection. Workshop version Diameter 17.85 mm Length 50 mm Tolerance ±0.002 mm Consistent precision for repeatable checks This compact inspection pin delivers a tight tolerance of ±0.002 mm, making it suitable for routine dimensional verification where reproducibility matters. The short 50 mm length limits cantilever deflection, so measurements remain stable when used in jigs, fixtures or tactile probes. As a hardened, single‑piece checking implement, the component reduces jack‑and‑gage adjustments and supports faster go/no‑go decisions on production lines. Robust material and compact handling reduce downtime Constructed from special steel, the pin withstands repeated seating cycles while keeping contact surfaces intact. The 17.85 mm diameter and balanced mass (0.15 kg) enable secure placement and straightforward handling on benches and in fixture arrays. The workshop specification emphasises practical wear resistance and easy integration into existing inspection routines, allowing technicians to maintain throughput with minimal setup time. Integrates with inspection workflows to save time Ideal for end‑measure and seating inspections, the pin complements manual gauges and automated checking stations alike. Its single‑unit delivery simplifies inventory for small batches or bespoke checks, while the clear dimensional specification supports traceable procedures. By shortening cycle time per inspection and lowering rework rates, this gauge pin contributes directly to improved process efficiency and dependable quality control. For precise seating checks and reliable end‑measure control, request the Metav IndustryLine gauge pin M323.H85 from Metav Werkzeuge — contact our Emmerich specialists for tailored recommendations and prompt supply Technical Data Article number: M323.H85 GTIN: 4061905449161 Manufacturer: Metav IndustryLine Category: Gauge pins Facts Diameter: 17.85 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single pin delivery Accuracy class: ±0.002 mm FAQ What is the intended use for this gauge pin? The gauge pin M323.H85 from Metav IndustryLine is intended for seating verification, end‑measure checks and short‑range dimensional control in workshop and production environments. Is the specified tolerance suitable for precision inspection tasks? Yes, the tolerance of ±0.002 mm makes this gauge pin appropriate for repeatable inspection tasks where tight dimensional control is required. Which materials is the pin compatible with in inspection setups? The M323.H85 is a hardened steel checking pin; it is used as a measuring reference against components of various materials when verifying fit and seating, rather than for direct machining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.86mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Choose the combination of workshop robustness and fine tolerance for reliable end‑measurement tasks; the 17.86 mm diameter, 50 mm long single gauge pin provides ±0.002 mm accuracy for repeatable checks and is delivered ready for safe transport. Order the article directly via Metav Werkzeuge or consult the Metav advisors for tailored selection. M323.H86 — Gauge pin (single), 17.86 mm diameter, 50 mm length, Metav IndustryLine The M323.H86 is a single gauge pin for precise end‑measurement and fit checks, designed for routine workshop metrology and fixture testing. Workshop-grade design for daily use Diameter 17.86 mm for precise fit Length 50 mm for reliable end measurements Tolerance ±0.002 mm for high accuracy Reliable workshop metrology with industrial accuracy A compact, single gauge pin engineered for consistent end‑of‑line checks delivers measurable improvements to throughput and quality control. With a specified tolerance of ±0.002 mm, the pin reduces uncertainty in go/no‑go assessments and alignment tasks, enabling faster decision making on the shop floor. The tight specification supports repeatable results when used as a reference in assembly fixtures or when validating bore diameters, turning a routine inspection into a verifiable quality step. Robust material and dimensions for repeatable handling Constructed from special steel, the pin combines wear resistance with dimensional stability under normal workshop conditions. The 17.86 mm diameter and 50 mm active length give a practical balance between insertion depth and handling convenience, making the item suitable for fixture set‑up, plug checks and end measurement applications. The workshop‑grade finish eases cleaning and prevents local corrosion that could affect gauge performance, so calibration intervals remain predictable. Practical delivery and integration into existing processes Designed for integration into established metrology routines, the pin is supplied in a protective transport case to prevent damage during storage and transit — a practical advantage for mobile inspection kits or multi‑station workshops. Lightweight and compact, it can be combined with fixture plates or handed‑over to quality stations without added handling complexity. Metav’s supply chain ensures prompt availability from Emmerich, supporting continuous production and minimising downtime. Choose the Metav IndustryLine M323.H86 gauge pin for workshop‑grade precision; contact Metav Werkzeuge in Emmerich for consulting on matching gauges to specific inspection tasks Technical data Article number: M323.H86 GTIN: 4061905449178 Brand: Metav IndustryLine Facts Diameter: 17.86 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Delivered in transport case Intended for end‑measurement applications FAQ What tolerance can be expected from this gauge pin? The specified tolerance for the M323.H86 gauge pin is ±0.002 mm, designed to support precise end‑measurement and fit checks. Which material is used for the pin body? The pin is made from special steel, chosen for dimensional stability and wear resistance in workshop environments. Is the gauge pin suitable for end‑measurements and fixture setting? Yes, the single gauge pin is intended for end‑measure tasks and is suitable for fixture set‑up and quick fit verification. Does the product arrive protected for transport? The item is supplied in a transport case to protect the pin during storage and handling. What are the exact dimensions of the pin? The key dimensions are 17.86 mm diameter and 50 mm length, providing a practical insertion depth for common inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.87mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-grade gauge pin that combines high repeatability with robust handling: a fixed Ø 17.87 mm dimension and a tight tolerance of ±0.002 mm support reliable end‑measure checks and fast in‑process verification. Supplied in a protective case for safe transport, order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.H87 — single test pin, Ø 17.87 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.H87 for precise end‑measurement and dimensional verification in workshop and small‑series production environments. Workshop-grade construction Fixed diameter Ø 17.87 mm Length 50 mm for compact gauging Supplied in protective case Precision that keeps production moving A fixed‑diameter gauge pin offers a straightforward reference for verifying hole sizes and end measurements; the M323.H87 presents a diameter of 17.87 mm combined with a declared accuracy of ±0.002 mm, which reduces uncertainty in assembly checks and quick go/no‑go comparisons. This level of repeatability shortens inspection cycles and decreases stoppages caused by ambiguous fits, making the pin suitable as a fast inspection tool on the shop floor and in quality control stations. The clear nominal dimension and tight tolerance help standardise routine checks, lowering the cognitive load for operators and supporting consistent production throughput. Built for daily workshop use Manufactured in special steel and trimmed to a 50 mm length, the pin balances reach and handling for a wide range of tasks without excess bulk. The workshop version is designed to withstand frequent handling and to fit into modular test fixtures or gauge blocks when rapid checks are required. Supplied in a protective case, the unit is simple to transport between workstations while maintaining its finished surfaces and dimensional integrity. The compact mass (approximately 0.15 kg) and single‑piece design aid quick placement and stable seating during verification, which supports reliable outcomes under typical workshop conditions. Practical integration and traceability for shopfloor verification For traceable identification and inventory, the part is listed as SKU M323.H87 and carries a GTIN for procurement and stock management. As a single, fixed‑size test pin it is ideal for end‑measure comparisons, seating tests and as a reference probe for assembly jigs where a defined stop or fit control is required. The straightforward geometry simplifies training and reduces interpretation errors in fast inspection routines, while the robust material selection supports repeated use as part of a dependable inspection regimen. The compact format also facilitates storage and handling in standard tool trays and quality kits. For workshop gauging needs, request the Metav IndustryLine gauge pin via Metav Werkzeuge; contact our Emmerich team for specification advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: M323.H87 GTIN: 4061905449185 Brand: Metav IndustryLine Category: Gauge pins / Test pins Facts Diameter: 17.87 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Delivery: Supplied in protective case Intended use: End measurement and dimensional verification FAQ What nominal dimension does the pin provide? The pin provides a fixed nominal diameter of 17.87 mm, suitable for direct end‑measure checks and fit verification with minimal interpretation. Is the pin suitable for use in assembly jigs and fixture checks? Yes; the single‑piece design and 50 mm length make the test pin appropriate for seating and reference use in fixtures and jigs for production checks. What tolerance can be expected from this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, allowing for tight repeatability in routine inspection tasks. Which material is used for the pin and what does it mean for handling? The pin is made from special steel, designed to provide mechanical stability and reliable contact surfaces for frequent workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.88mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precision, robust workshop design and practical transport packaging for repeatable end measurements; the compact gauge pin combines high tolerance with easy handling. Order the item directly via Metav Werkzeuge or ask our consultants if further specification detail is required. Gauge pin M323.H88 — single gauge pin, Ø 17.88 mm, length 50 mm (Metav IndustryLine) The Gauge pin M323.H88 is a single, workshop-grade test pin in special steel intended for precise end and dimensional checks in inspection jigs and measuring benches. Single gauge pin, Ø 17.88 mm Length 50 mm for compact checks Accuracy ±0.002 mm for reliable results Supplied in protective transport case Consistent diameter checks for production control The compact measuring pin delivers repeatable diameter checks where small tolerances matter. With a nominal diameter of Ø 17.88 mm and a stated positional tolerance of ±0.002 mm, the pin is suited to fine acceptance inspection and go/no‑go verification. Classified as a micro range instrument (measurement range up to 100 mm), it combines the stiffness required for short‑span tests with the resolution necessary for workshop quality control, reducing the need for rework and supporting efficient process decisions. Robust workshop design and handling advantages Designed as a workshop version, the measuring pin uses special steel for wear resistance and dimensional stability during repeated use. At a length of 50 mm and weighing approximately 0.15 kg, the component is easy to seat in fixtures and to manipulate in tight inspection set‑ups. Delivery in a protective transport case safeguards the gauge during storage and movement, ensuring the nominal geometry is preserved between measurements and lowering the risk of accidental damage that would otherwise affect result reliability. Seamless integration into inspection workflows The pin is suitable for end measurements, alignment checks and use as a reference plug in calibration jigs; the compact form factor supports automation feeds and manual benches alike. Identified by SKU M323.H88 and GTIN 4061905449192, the element can be documented in inventory and traceability systems. The combination of tight tolerance and workshop robustness facilitates faster decision making on the shop floor: fewer ambiguous results, clearer pass/fail outcomes and a reduced incidence of scrapped parts. Practical reasons to choose a Metav IndustryLine gauge pin Choosing a workshop-grade measuring pin from Metav IndustryLine aligns precision with availability: the product is intended to be a straightforward, dependable tool for everyday metrology tasks. The design focuses on the essentials—accurate diameter, solid material, compact length and protective packaging—so that inspection personnel can concentrate on measurement quality rather than component handling. This straightforward specification supports clear procurement and efficient asset management across production sites. For specification confirmation, availability from our Emmerich stock and tailored advice on using the M323.H88 in existing inspection setups, contact Metav Werkzeuge for fast professional support and supply arrangements. Technical data Article number: M323.H88 GTIN: 4061905449192 Label: Prüfstift, einzeln, 17,88 mm Länge 50 mm Numbers / Core technical data Diameter: 17.88 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features / Materials Material: Special steel Workshop design (workshop‑grade execution) Suitable for end and dimensional measurements Supplied in protective transport case FAQ What is the nominal diameter of the pin? The nominal diameter is 17.88 mm, specified for precise end and fit measurements with the M323.H88 gauge pin. What tolerance does the gauge pin hold? The instrument is specified with an accuracy of ±0.002 mm, enabling tight inspection limits and reliable go/no‑go checks. Which materials is the pin made from? The measuring pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop conditions. Is the pin delivered protected for transport? Yes, the product is supplied in a protective transport case to preserve geometry during handling and storage. What is the SKU and GTIN for ordering and documentation? SKU: M323.H88; GTIN: 4061905449192 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.89mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a compact, workshop‑grade gauging pin that combines high dimensional fidelity and robust construction: the small diameter and tight tolerance ensure repeatable end‑dimension checks, while the supplied protective case keeps the instrument ready for daily use. Order the part directly via Metav Werkzeuge or consult the technical team for batch and fixture advice. Test pin 17.89 mm — workshop gauging pin, 50 mm length (Metav IndustryLine) Test pin 17.89 mm, 50 mm length is a precision‑gauging component for end‑dimension inspection and fixture verification in machining and assembly environments. Workshop design for daily use High accuracy ±0.002 mm Special steel construction Delivered in protective case Consistent dimensional control for production environments The compact pin has been engineered for repeatable measurements where precision is essential. A verified positional accuracy of ±0.002 mm provides a reliable baseline for pass/fail checks and short‑run quality control. This level of tolerance reduces rework by tightening the uncertainty band around critical diameters, enabling production engineers to make faster, data‑driven decisions and maintain process capability. Durable construction that withstands workshop handling Constructed from special steel, the pin balances hardness and corrosion resistance to endure routine contact with workpieces and fixtures. The 50 mm shaft length offers a stable engagement depth that minimises measurement wobble while remaining compact enough for tight fixturing. The robust finish and geometry limit deformation and wear, extending service life and lowering total cost of ownership in demanding shopfloor conditions. Compact form factor for flexible gauging tasks With a measuring diameter of 17.89 mm and a restrained overall profile, the pin is suitable for end‑dimension inspection, locating, and verification within jigs and gauges. The workshop version is intended for everyday industrial use and is delivered in a protective case, simplifying transport between workstations and helping to preserve the measuring surface. The small mass and simple geometry also make integration into manual and semi‑automatic fixtures straightforward. Traceability and integration into quality workflows The component is supplied with clear identification to support inventory control and traceability in quality documentation. The compact design facilitates fixture mounting and routine exchange during maintenance intervals, supporting lean inspection practices and predictable machine downtime. Combined with Metav’s distribution and quality filter in Emmerich, the part contributes to uninterrupted supply and consistent measurement standards on the production floor. For ordering and specific batch or fixture questions, contact Metav Werkzeuge in Emmerich to discuss availability of the Test pin and options for series supply or customised packaging. Technical data Article number: M323.H89 GTIN: 4061905449208 Manufacturer: Metav IndustryLine Measurements Measuring diameter: 17.89 mm Shaft length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Materials & features Material: special steel Design: workshop version Delivery: protective case included Category: gauging pin / test pin FAQ What applications suit this test pin best? The test pin is designed for end‑dimension checks, locating and verification tasks in machining, assembly jigs and inspection fixtures; the 17.89 mm diameter and 50 mm length suit compact components and fixture integration. Is the accuracy of the test pin traceable? The part is supplied with identification and production traceability; the specified accuracy of ±0.002 mm describes the manufacturing tolerance for the gauging surface. Can this pin be used in automated fixtures? Yes, the compact geometry and robust material make the pin suitable for manual and semi‑automatic fixtures; ensure mounting and repeatability criteria are met for fully automated applications. How does the workshop design affect longevity? The workshop version and special steel construction offer improved resistance to wear and handling, prolonging service life under normal production‑floor conditions. What is the SKU for ordering replacement pins? The replacement article is listed as M323.H89 and can be ordered through Metav Werkzeuge for single‑unit or series supply Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.8mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.002 mm tolerance, special steel construction and a compact 50 mm length for reliable end‑dimension checks; order directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge Pin, single, 17.8 mm Ø – 50 mm length (Metav IndustryLine) The gauge pin is a workshop‑grade test pin designed for end‑dimension verification and fixture inspection in metrology and assembly workflows. Workshop version, robust construction Diameter 17.8 mm for precise fits 50 mm length for standard gauging Consistent precision for end‑dimension checks The test pin delivers repeatable results thanks to a tolerance of ±0.002 mm, which supports high‑precision fitting and go/no‑go verification in production and inspection routines. This level of accuracy keeps process variation low and reduces rework by providing a verifiable reference for hole and shaft fits. Where interchangeability and tight clearances matter, the controlled geometry and surface finish of the pin ensure reliable contact and measurable outcomes without guesswork. Built for workshop durability and ease of handling Constructed from special steel, the pin resists wear under frequent use and maintains its calibration characteristics over time, which reduces the frequency of replacement and downtime. The 50 mm length provides sufficient engagement for typical gauging tasks while remaining compact for manual handling and fixture insertion. The workshop version combines robustness with a balance of stiffness and manageability, making it suitable for bench checks, jig validation and on‑machine spot inspections. Practical integration and traceability in production The single‑piece design supports straightforward inventorying and assignment to inspection kits; the compact weight and dimensions make the pin convenient for routine tooling. With an assigned GTIN and clear article identification, traceability is maintained through supply and inspection chains. Metav’s distribution approach means the item can be supplied as part of broader inspection assortments, helping to consolidate sourcing and ensure consistent quality across workshop and production environments. For specification matching and supply of the Metav IndustryLine gauge pin, contact Metav Werkzeuge GmbH in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and fast delivery Technical Data Article number: M323.H80 GTIN: 4061905449116 Facts Diameter: 17.8 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single gauge pin Label: Gauge pin, single, 17.8 mm length 50 mm FAQ What accuracy can be expected from this gauge pin? The gauge pin provides an accuracy of ±0.002 mm, making it suitable for precise end‑dimension verification in workshop and small‑series production environments. Is the pin suitable for fixture and jig checking? Yes, the Metav IndustryLine gauge pin is designed as a workshop version suitable for fixture, jig and assembly checks where repeatable reference dimensions are required. What material is used and how does it affect wear resistance? Made from special steel, the pin offers enhanced wear resistance compared with untreated steels, supporting longer service life under frequent contact checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.91mm Test Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of precise dimensional control, robust special‑steel construction and a compact 50 mm length for reliable end‑measure checks in workshop routines. Order the part directly via Metav Werkzeuge or consult the Metav team for delivery and stock information. Gauge pin, single — 17.91 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single (17.91 mm diameter, 50 mm length) designed for fast verification of final dimensions and bore checks in workshop metrology. Precision ground 17.91 mm diameter Tight tolerance ±0.002 mm 50 mm usable length for deep checks Workshop-grade special steel construction Consistent, measurable accuracy for routine checks The precision-ground diameter of 17.91 mm combined with a declared tolerance of ±0.002 mm provides a reliable basis for repeatable pass/fail decisions. Where throughput and traceability matter, the tight tolerance reduces ambiguity during inspection and shortens cycle times by limiting rework. Presented as a single test element, this component suits quick go/no-go verifications and supports consistent inline quality assurance without complex setup. Robust material and handling reduce downtime Manufactured from special steel in a workshop specification, the pin resists common wear mechanisms encountered during repeated insertion and extraction. The hard, finely finished surface preserves dimensional integrity and eases cleaning, which helps maintain measuring certainty between periodic checks. With a compact 50 mm length the item remains easy to handle and store while offering sufficient reach for many typical bore and end‑measure applications. Integration into inspection workflows and tooling Supplied as an individual gauge pin, the item complements bench fixtures, manual gauges and basic checking rigs. The lightweight construction (approx. 0.15 kg) enables rapid changeovers and minimal fixturing influence, so measurement throughput improves without adding system complexity. Marked and traceable identifiers support inventory control and link inspection results to specific hardware when documenting quality records. Practical choice for workshop environments As a workshop‑grade measuring element, the pin balances precision with durability for everyday use. The precision-ground finish and compact form make it suitable for end‑measure checks where space and speed are priorities. Its simple geometry minimises handling errors, supports straightforward visual and tactile inspection and integrates seamlessly into established metrology processes. Choose Metav IndustryLine's M323.H91 for dependable end‑measure verification and contact Metav Werkzeuge for supply and dispatch from Emmerich Technical Data SKU: M323.H91 GTIN: 4061905449222 Brand: Metav IndustryLine Description: Gauge pin, single, 17.91 mm diameter, length 50 mm ECLASS: 21170231 Facts Diameter: 17.91 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Category: Messstifte Special features Material: special steel Version: workshop execution Delivery: single item Intended use: end‑measure and bore verification Label: Prüfstift, einzeln, 17,91 mm Länge 50 mm FAQ What inspection tasks is this pin suitable for? This pin is intended for final dimensional checks and bore verification; the 17.91 mm diameter and ±0.002 mm tolerance make it suitable for precise workshop measurements with the Metav IndustryLine gauge pin M323.H91. Is the material suitable for repeated use in a production environment? Yes, the pin is made from special steel and produced in a workshop specification to withstand repeated insertion and extraction common in routine inspection tasks. How is the item identified for traceability? Identification is supported by the SKU M323.H91 and GTIN 4061905449222, which can be recorded alongside inspection results for traceability. Can this pin be used as a reference standard in calibration procedures? The pin is designed for routine verification and bore checks; for formal calibration protocols refer to your internal procedures and the applicable laboratory accreditation requirements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com