Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
18.05mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Taking advantage of precise diameter control, robust material and secure transport packaging ensures reproducible end‑size checks and a longer service life; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — 18.05 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for accurate end‑size verification and routine workshop checking, combining a defined diameter and hardened construction for consistent fit control. 18.05 mm precision diameter Tolerance ±0.002 mm accuracy Made from special steel Supplied in a protective case Reliable dimensional control for workshop routines The supplied gauge pin delivers repeatable measurements where exact fit and runout matter. With a diameter of 18.05 mm and a declared accuracy of ±0.002 mm, the pin provides a clear dimensional reference for go/no‑go checks, plug gauges and assembly verifications. In everyday machine‑shop and inspection tasks this level of precision reduces rework and speeds up quality decisions, offering a straightforward way to confirm bore and shaft fits without complex set‑ups. Material and finish engineered for longevity Manufactured from special steel and finished to workshop grade, the component resists surface wear and preserves its nominal size under frequent use. The 50 mm shaft length gives stable support during insertion, while the hardened surface maintains dimensional integrity over many cycles. Supplied in a protective case for transport, the pin arrives ready for secure storage and immediate deployment in assembly or inspection stations, reducing the risk of accidental damage during handling. Simple integration into quality workflows Identification and traceability are supported by the SKU and GTIN, enabling inventory control and quick reference in maintenance records. The compact geometry of the checking pin makes it suitable for bench tests, fixture set‑ups and rapid go/no‑go assessments in production. When incorporated into standard inspection routines, the pin helps maintain a documented chain of measurement decisions and supports consistent part interchangeability across batches. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and technical clarification via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.I05 GTIN: 4061905071645 SKU: M323.I05 Data Diameter: 18.05 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Supplied in protective case Category: Gauge pins (Messstifte) FAQ What materials is the pin suitable for checking? The gauge pin from Metav IndustryLine is intended as a dimensional reference and is suitable for checking fits in common engineering materials; the component itself is made from special steel for durability. How is the declared accuracy verified? Accuracy of ±0.002 mm is a manufacturing specification for the gauge pin and can be referenced against internal quality records or the supplier's conformity information for dimensional tolerances. Is the pin ready for immediate use upon delivery? Yes, the gauge pin arrives as a single, workshop‑grade checking tool in a protective case, ready for insertion into inspection and assembly routines. Can this pin be used for go/no‑go checks on shafts and bores? The 18.05 mm diameter and stable 50 mm length make the pin well suited for go/no‑go assessments and quick fit verifications in production and maintenance environments. How is the product identified for stock and traceability? The item is listed under SKU M323.I05 and GTIN 4061905071645 for straightforward inventory tracking and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.06mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of workshop-grade robustness and ±0.002 mm accuracy combined with a compact 50 mm length for reliable end‑size verification; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I06 — single gauge pin, Ø 18.06 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.I06 is a workshop‑grade precision pin designed for end‑size checks, locating and go/no‑go applications in inspection, jigging and fixture set‑ups. Workshop-grade, hardened special steel Diameter 18.06 mm, precision ±0.002 mm Length 50 mm for stable locating Accuracy that reduces inspection uncertainty A compact precision pin with a nominal diameter of 18.06 mm and a verified tolerance of ±0.002 mm, this gauge component reduces measurement uncertainty in repetitive checks. The tight tolerance aligns with fine inspection tasks where small deviations lead to costly rework; by applying a defined reference datum with the pin, batch sampling and final inspection cycles become faster and more conclusive. In practice, smaller corrective actions can be implemented earlier in the process, improving throughput and lowering scrap rates. Built for workshop use and repeatable locating Delivered in a workshop‑grade design and manufactured from special steel, this single gauge pin withstands routine handling and positioning without compromising roundness or straightness. The 50 mm shank length offers a stable bearing surface in vices, fixtures or go/no‑go housings, enabling repeatable positioning in assembly and tooling tasks. For toolmakers and maintenance engineers the practical advantage is clear: consistent locating reduces set‑up time and increases the reproducibility of subsequent machining or testing steps. Practical handling and integration in inspection workflows The pin’s compact geometry and robust construction make it straightforward to integrate into existing jigs and gauges. Where end‑measure verification is required, the component functions as a precise reference for pass/fail decisions and alignment operations. The modest mass and balanced dimensions mean it can be manipulated easily during batch inspection or fitted into specialised fixtures without adding significant inertia. This simplicity supports lean workflows and keeps calibration routines efficient. For workshop-ready traceability and reliable end‑size verification, contact Metav Werkzeuge in Emmerich to discuss the M323.I06 gauge pin, availability and suitable delivery options Technical data SKU: M323.I06 GTIN: 4061905071652 Label: Gauge pin, single, 18.06 mm, length 50 mm Facts Diameter: 18.06 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg eClass: 21170231 Special features Workshop execution Material: Special steel Intended for end‑size verification, locating and go/no‑go applications FAQ What is the nominal diameter and tolerance of this pin? The gauge pin has a nominal diameter of 18.06 mm and a declared tolerance of ±0.002 mm for high‑precision end‑measure checks. Is this pin suitable for fixture and jig locating? Yes; the M323.I06 is a workshop‑grade single gauge pin designed specifically for locating and fixture integration where consistent datum reference is required. What material is used and how does it affect durability? Manufactured from special steel, the pin combines wear resistance with dimensional stability to withstand routine handling and maintain roundness over prolonged use. Can the pin be used for final inspection and go/no‑go tests? The pin is intended for end‑size verification and can serve as a reliable reference in go/no‑go assemblies and final inspection procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.07mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Compact workshop gauge pin in special steel with ±0.002 mm accuracy ensures repeatable inspection results; order the gauge pin directly via Metav Werkzeuge or contact our consultants for tailored advice. Gauge pin, single — 18.07 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single 18.07 mm, 50 mm is a workshop-grade precision pin for bore checking, alignment and end-measure verifications in fine mechanical and production settings. Workshop‑grade construction Special steel for wear resistance Tolerance ±0.002 mm 18.07 mm diameter, 50 mm length Precision that supports reliable in‑line inspection Engineered for routine verification tasks, this gauge pin delivers a measurable benefit where consistency matters. The ±0.002 mm tolerance class positions the pin for tasks that require very fine repeatability; this level of accuracy reduces uncertainty during go/no‑go checks and ensures reproducible dimension control across batches. The compact geometry and hardened surface provide dimensional stability during handling, so results remain consistent between operators. Measurable performance like this translates directly into reduced rework and fewer stoppages on the production line. Robust material and design for everyday workshop use Constructed from special steel, the pin combines surface hardness with resistance to wear—an advantage when used frequently in jigs, fixtures and gauge stacks. The 50 mm length and 18.07 mm diameter form a compact reference that is easy to seat in bores and locating features while maintaining rigidity. The workshop specification means the component tolerates regular handling and quick checks without complex maintenance. Where floor-level reliability and fast throughput are priorities, the robust construction supports efficient quality workflows and long service life. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.I07 can be integrated into existing inspection routines and to request product-specific recommendations. Technical data SKU: M323.I07 GTIN: 4061905071669 Label: Gauge pin, single, 18.07 mm, length 50 mm Facts Diameter: 18.07 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop‑grade design Category: Gauge pins Single component for end‑measure and alignment checks FAQ What materials is this gauge pin suitable for when checking fitted components? The gauge pin is a gauge pin, single 18.07 mm, 50 mm made from special steel and is intended for dimensional checks of bores and locating features across common engineering materials. How precise is the pin for routine inspection? The pin offers a tolerance of ±0.002 mm, making it suitable for fine repeatability checks and verification tasks where tight dimensional control is required. Can the pin be used as a reference for alignment in assembly jigs? Yes, the compact 50 mm length and rigid diameter make the pin appropriate as a locating and alignment reference in jigs and fixtures for small to medium assemblies. Is any calibration certificate supplied with the product? No calibration certificate is specified with this item by default. If a calibrated instrument is required, please contact Metav Werkzeuge to discuss available calibration options. How should the gauge pin be maintained to preserve accuracy? Clean the pin after use, protect it from corrosive environments, and store it in a suitable protective tray to prevent nicks and wear that could affect dimensional performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.08mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability ±0.002 mm, a precise 18.08 mm diameter and robust special steel, delivered as a single workshop reference pin in a transport case for safe handling; order the gauging pin directly via Metav Werkzeuge or consult our product specialists for integration advice. Gauging pin M323.I08 — single workshop reference pin, 18.08 mm Ø, 50 mm length (Metav IndustryLine) The gauging pin M323.I08 is a single, workshop-grade reference pin designed for final dimension checks and fixture set-up in fine mechanical and metalworking environments. Diameter precisely 18.08 mm High accuracy ±0.002 mm Special steel construction Delivered in transport case Precision that reduces rework and secures quality The 18.08 mm reference diameter with an accuracy of ±0.002 mm provides a reliable basis for end-dimension verification in serial inspection and setup tasks. Manufactured from special steel, the pin maintains geometric stability under repeated use and resists deformation during handling. As a result, measurement routines become more reproducible and scrap rates are reduced, supporting efficient quality control and consistent production output. Workshop-ready design for dependable handling Prepared as a workshop version, the pin is built to withstand frequent use during set-up and verification cycles. At 50 mm length and weighing approximately 0.15 kg, the component balances rigidity with manoeuvrability for bench and fixture work. Delivery in a transport case ensures secure handling and protects the gauge during storage and transit, reducing the risk of accidental damage that would otherwise compromise measurement integrity. Practical integration into inspection and assembly workflows As a compact reference pin, the component suits micro-range inspection tasks where short, stiff measuring elements are essential. Its dimensions and repeatable tolerance make it suitable for final checks on small machined parts, gauges and assemblies typical in precision engineering. The simple geometry allows fast visual sorting and direct integration into existing fixture points or go/no-go checking routines, contributing to faster setup times and reliable conformity assessments. Request the Metav IndustryLine gauging pin via Metav Werkzeuge for dependable end-dimension control and secure transport — Metav Werkzeuge is available to advise on specification matching and delivery from Emmerich. Technical Data Article number: M323.I08 SKU: M323.I08 GTIN: 4061905071676 Brand: Metav IndustryLine Material: Special steel Facts Diameter: 18.08 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Workshop version Single gauging pin Transport case included for protection End-dimension reference for fine mechanical work FAQ What tolerance is the gauging pin produced to? The gauging pin M323.I08 is manufactured to a tolerance of ±0.002 mm, suitable for high-repeatability reference measurements. What material is used for the pin? This reference pin is made from special steel, selected for dimensional stability and wear resistance in workshop conditions. Which applications suit this reference pin? Designed for end-dimension checks, the pin is ideal for fine mechanical parts, fixture set-up and final inspections within the micro measurement range. Is a transport case supplied with the pin? Yes, the product is supplied in a transport case (plastic or wooden variant) to protect the gauge during handling and transport. Can the pin be integrated into fixture and go/no-go checks? The geometry of the reference pin allows direct use as a go/no-go reference or as a locating element in fixtures for rapid conformity checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.09mm Test Pin, 50mm Length, Workshop Version, Special Steel in Plastic Case - Metav IndustryLine
Compact workshop test pin combining a precise Ø 18.09 mm nominal diameter with a tight manufacturing tolerance of ±0.002 mm and a practical 50 mm shaft length; supplied in a protective transport case for safe handling. Order directly via Metav Werkzeuge or contact our consultants for specification advice. Gauge pin M323.I09 — Test gauge pin Ø 18.09 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.I09 engineered for end‑dimension verification and go/no‑go checks in workshop and quality‑control applications. Precision ground Ø 18.09 mm Tight manufacturing tolerance ±0.002 mm Workshop version, robust finish Supplied in transport case Accurate measurement where it matters The M323.I09 is designed to deliver repeatable checks for end dimensions and fit verifications. With a nominal diameter of 18.09 mm and a documented manufacturing deviation of ±0.002 mm, the pin provides the dimensional reliability required for assembly gauges and final inspection routines. The short 50 mm shaft offers stability during insertion, reducing the influence of lateral play and improving measurement consistency in routine quality checks. Robust material and industrial finish Manufactured from special steel, this test pin combines wear resistance with dimensional stability under typical workshop conditions. The material choice supports frequent handling and contact with mating components without rapid degradation of the measurement surface. The workshop version finish prioritises durability and straightforward maintenance, ensuring the gauge retains its functional geometry through regular use. Practical handling and storage Supplied as a single item and delivered in a protective transport case, the pin is ready for immediate use on the shop floor and simple to store safely between tasks. The compact weight (approx. 0.15 kg) and straight‑forward geometry make the pin easy to integrate into fixture checks or use as a reference in visual inspection benches. Its configuration suits repetitive go/no‑go tasks where fast, reliable feedback shortens inspection cycles and supports production throughput. Proven partner for everyday precision Part of the Metav IndustryLine range, this test pin reflects the brand’s focus on making high precision tools accessible to workshops and small production environments. Combining a clear tolerance specification with a robust construction supports decision‑making in procurement and ensures compatibility with standard inspection practices. The straightforward design reduces the need for complex training and helps maintain quality standards across routine operations. Contact Metav Werkzeuge for procurement guidance or to discuss suitability of the M323.I09 for specific inspection tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert support Technical Data Article number: M323.I09 GTIN: 4061905449345 Label: Gauge pin, single, 18.09 mm Ø, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 18.09 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Supplied in transport case Single gauge pin, individual item FAQ What is the nominal diameter and tolerance of the test pin? The M323.I09 gauge pin has a nominal diameter of 18.09 mm and a manufacturing tolerance of ±0.002 mm. Is the pin supplied as a single item or in sets? This article is supplied as a single gauge pin; the product description specifies a single item delivery. What material is used for the pin? The test pin is made from special steel, chosen for wear resistance and dimensional stability in workshop use. Is a calibration certificate included with the M323.I09? Calibration information is not specified in the product data; a calibration certificate is not listed as included. Which applications suit this gauge pin best? The pin is suitable for end‑dimension verification, go/no‑go checks and assembly fit inspections in workshop and production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.11mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise repeatability and robust special-steel construction combined with a compact form factor for dependable workshop measurement. The tight ±0.002 mm tolerance and 50 mm length ensure consistent final-dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if further specification advice is required. Gauge pin M323.I11 — 18.11 mm Ø, 50 mm length (Metav IndustryLine) The Gauge pin M323.I11 is a single inspection pin designed for exact final-dimension checks and fixture alignment in workshop and inspection environments. Workshop-grade construction Nominal diameter 18.11 mm Tolerance ±0.002 mm Overall length 50 mm Supplied in transport case Stabilise quality control with micromeasurement certainty The inspection pin delivers a nominal diameter of 18.11 mm with a manufacturing tolerance of ±0.002 mm, providing a stable reference for pass/fail checks and jig verification. Manufactured from special steel, the component resists wear during repeated seating operations and maintains roundness under normal use. Such a narrow tolerance is particularly valuable where consistent repeatability reduces rework and inspection time — a rational improvement to production throughput that supports tighter process control. Compact format ideal for precise workshop and toolroom tasks Classified within the micro measurement range, this compact gauge pin combines accessibility with stiffness: its 50 mm overall length provides enough reach for small assemblies while remaining easy to handle and align. The small footprint suits fine mechanical work and fixture set-up where larger gauges would compromise control. In practical terms, the geometry reduces the chance of bending or misalignment during handling, translating technical precision into everyday reliability at the bench. Durable handling and transport for repeatable use The pin’s material choice and workshop specification mean long service life under typical inspection cycles. Supplied in a protective transport case, the gauge arrives ready for safe storage and movement between stations, keeping the measuring surface free from damage and contamination. Lightweight yet robust, the component integrates well into existing inspection kits and complements other reference standards in the shop without adding unnecessary complexity. For reliable workshop repeatability and consistent inspection results, contact Metav Werkzeuge to discuss the M323.I11 gauge pin and to arrange supply from our Emmerich facility Technical data Article number: M323.I11 GTIN: 4061905449253 Weight: 0.15 kg Core dimensions Nominal diameter: 18.11 mm Length overall: 50 mm Tolerance: ±0.002 mm Materials & special features Material: Special steel Workshop version Supplied in transport case FAQ What tolerance does the gauge pin offer? The gauge pin M323.I11 is manufactured to a tolerance of ±0.002 mm, suitable for tight workshop and inspection tolerance requirements. Is the pin suitable for fixture alignment in toolrooms? Yes, the Metav IndustryLine gauge pin M323.I11 (pin gauge) is intended for final-dimension checks and fixture alignment in workshop and toolroom applications. How is the gauge pin delivered and protected? Delivery of the M323.I11 includes a protective transport case to safeguard the measurement surfaces during storage and movement. Which material is used for the gauge pin? The inspection pin is made from special steel, specified for wear resistance and stable dimensional properties under routine use. Does the size classify as a micro-range instrument? With a nominal diameter of 18.11 mm and a compact length, the pin falls into the micro measurement range, balancing precision and ease of handling for small parts inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.12mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from a precise 18.12 mm diameter combined with a tight ±0.002 mm tolerance and a 50 mm length that supports stable gauge checks; order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.I12 — 18.12 mm measuring diameter, 50 mm length (Metav IndustryLine) Test pin M323.I12 for end‑measurements and gauge inspections in workshop metrology and production control Precision tolerance ±0.002 mm Diameter 18.12 mm for gauge testing 50 mm length for stable handling Workshop version for robust use Transport case included for safe transport Consistent geometry for repeatable inspection results The supplied gauge pin is manufactured to a defined geometry that reduces interpretation error during manual inspection. With a nominal diameter of 18.12 mm and a verified clearance class, the component is suited to plug‑type checks, reference stacks and fixture validation where repeatability matters. The workshop design reduces the risk of accidental deformation in daily use, supporting consistent contact conditions and reliable pass/fail decisions in routine quality control. High accuracy and material properties that support traceable measures Built from special steel and finished for stable dimensions, the pin offers a verified ±0.002 mm dimensional accuracy which places it in the precision range for fine inspection tasks. This accuracy ensures measurable differences are attributable to the workpiece rather than the measuring element. The material selection provides wear resistance appropriate for frequent engagement with mating gauges; together with its compact 50 mm length, this makes the pin an economical tool for repeat verifications and reference comparisons in small‑part production. Practical handling, protection and workshop suitability Weighing approximately 0.15 kg, the pin is easy to position by hand or locate within small fixtures. The transport case supplied with this article protects the pin between uses and during transfer, reducing handling damage and contamination. The combination of a robust workshop finish and secure packaging supports long service intervals and reduces downtime for replacement. The product’s compact form factor also simplifies storage in instrument cabinets or inspection sets. For tailored advice or to secure the M323.I12 test pin from Metav Werkzeuge, contact our specialists in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.I12 GTIN: 4061905449260 Manufacturer: Metav IndustryLine Dimensions & tolerances Diameter: 18.12 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials & special features Material: special steel Version: workshop execution Packaging: transport case included Category: measuring pins FAQ What accuracy can be expected from this test pin? The test pin M323.I12 is specified with an accuracy of ±0.002 mm, suitable for precise workshop inspections and repeat checks. Is the pin suitable for frequent use in a production environment? Yes, the workshop execution and special steel construction of the M323.I12 make it suitable for regular use in production and inspection workflows. Does the delivery include protective packaging? Delivery of the M323.I12 includes a transport case to protect the measuring surface during storage and transit. For which applications is this measuring pin intended? The M323.I12 is intended for end‑measurements, plug‑type gauge checks and fixture verification in workshop metrology and small‑part production. How can Metav IndustryLine items be ordered or queried? For ordering or technical queries about the M323.I12 and other Metav IndustryLine products, contact Metav Werkzeuge via the provided email or telephone number Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.13mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of workshop-grade robustness combined with tight tolerance and simple handling for dependable end‑size inspection; order directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin, single — Ø 18.13 mm, length 50 mm (Metav IndustryLine) A Gauge pin, single engineered for precise end‑size verification in workshop metrology and production control. Workshop version for everyday use Diameter 18.13 mm with tight tolerance Length 50 mm compact profile Tolerance ±0.002 mm Reliable end‑size control for production checks The compact gauge pin is made for repeatable end‑size inspection where consistent fit checks and go/no‑go verification are required. With a declared tolerance of ±0.002 mm, the pin reduces ambiguity in acceptance criteria and supports rapid decision making on component conformity. The workshop execution balances dimensional accuracy with handling robustness, making this test pin suited to frequent use in assembly, incoming inspection and jig checks. Its nominal diameter of 18.13 mm provides a clear reference for bore and shaft mating checks. Measurable precision that supports process reliability A short, rigid design with a 50 mm length gives a good stiffness-to-reach ratio for typical workshop tasks; the unit weight of 0.15 kg ensures a stable feel without being cumbersome. The item is manufactured from special steel, offering stable geometry under normal workshop conditions. Numeric specification and simple form factor streamline integration into measurement routines and reduce operator variability during end‑size evaluation. The compact format also helps maintain traceability and storage discipline in lean production environments. Practical handling and workshop integration Delivered as a single unit in a transport case, the pin is ready for secure storage and simple removal when checks are needed; the protective packaging supports safe transport between bench and machine. The workshop design and single‑piece format facilitate fast, low‑effort checks during set‑ups, assembly and maintenance tasks. For bespoke test jigs or paired measurements, the pin’s standardised diameter and tight tolerance simplify substitution and documentation within quality records. For further details on suitability for a specific application, Metav Werkzeuge staff can provide technical guidance and matching items. Choose the Metav IndustryLine gauge pin for dependable end‑size verification and contact Metav Werkzeuge in Emmerich for ordering or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.I13 GTIN: 4061905449277 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 18,13 mm Länge 50 mm Core figures Diameter: 18.13 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Design and special features Material: Special steel Version: Workshop execution Delivery: single pin in transport case Application hint: End‑size checking / go/no‑go verification FAQ What is the exact diameter and tolerance of the pin? The pin has a diameter of 18.13 mm and is specified with a tolerance of ±0.002 mm for reliable end‑size checks. Is this item supplied ready for use or does it require calibration? The Metav IndustryLine test pin is supplied as a ready‑to‑use workshop item; standard delivery includes the pin in a transport case but does not indicate special calibration certificates. Which materials and applications is the pin intended for? Made from special steel, the pin is intended for general workshop metrology tasks such as bore checks, assembly verification and go/no‑go fit tests. How should the pin be stored to maintain accuracy? Store the pin in its transport case in a dry, stable environment; avoid mechanical shocks and contamination to preserve the dimensional integrity of the pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.14mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop design for reliable end‑measure verification; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I14 — 18.14 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.I14 designed for precise go/no‑go checks, end‑measure verification and routine inspection tasks in workshop and production environments Workshop version, robust construction Diameter 18.14 mm with ±0.002 mm tolerance 50 mm overall length, special steel construction Delivered in protective transport case Consistent fit for fast, repeatable inspection The pin provides a precise nominal diameter of 18.14 mm with a certified tolerance of ±0.002 mm, making it suitable for tight fit checks and final dimension verification. As a hardened, single gauge element, it functions as a quick go/no‑go reference or a master plug for end‑measure testing; this reduces the need for prolonged setup and helps avoid production stoppages caused by uncertain fits. The compact design supports rapid handling and short cycle inspection where time efficiency is essential. Built for workshop durability and easy handling Constructed from special steel, the component offers a balance of dimensional stability and wear resistance appropriate for frequent use in workshop settings. The 50 mm length gives sufficient engagement for reliable seating while remaining easy to position by hand or with simple fixtures. The workshop version implies a design focus on robustness rather than delicate laboratory handling, while the supplied protective transport case ensures the pin arrives undamaged and remains protected between uses, preserving measurement integrity over time. Integrates into inspection routines and reduces uncertainty As a single gauge pin, the item supports rapid verification of bores, gauges and assemblies during in‑process checks or final inspection. Use as an end‑measure reference shortens decision cycles: a clear pass/fail result from a known 18.14 mm master helps prevent rework and streamlines quality control documentation. Lightweight and simple to use, the pin complements tactile inspection workflows and can be combined with more advanced metrology tools when traceable or statistical measurement is required. Contact Metav Werkzeuge today to discuss how the M323.I14 gauge pin from Metav IndustryLine can improve inspection speed and repeatability in your workshop; our Emmerich team is available for technical guidance and order fulfilment Technical data Article number: M323.I14 GTIN: 4061905449284 Material: Special steel Diameter: 18.14 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Numeric specifications Diameter: 18.14 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg GTIN: 4061905449284 Features / Special properties Workshop version Delivered in protective transport case Single gauge pin Category: Gauge pins SKU: M323.I14 Manufacturer: Metav IndustryLine FAQ What is the nominal size and tolerance of this gauge pin? The gauge pin has a nominal diameter of 18.14 mm with a tolerance of ±0.002 mm, suitable for tight fit and end‑measure checks. Is the pin suitable for regular workshop use? Yes — the workshop version is designed for frequent handling and the special steel construction provides practical durability for routine inspection tasks. How is the gauge pin supplied and protected in transit? The pin is supplied as a single unit and is delivered in a protective transport case to prevent damage during shipping and storage. Can this pin be used as an end‑measure reference for assembly fixtures? The M323.I14 gauge pin is intended for go/no‑go and end‑measure verification and can be used as a quick reference in fixture setup and final checks. What documentation identifies the product for ordering and traceability? Use SKU M323.I14 and GTIN 4061905449284 when ordering; these identifiers match the Metav IndustryLine catalogue entry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.15mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Taking advantage of precise 18.15 mm diameter and ±0.002 mm accuracy, this single gauge pin ensures reliable end‑size checks and repeatable set‑ups in workshop inspection routines. Supplied ready for use and delivered in a protective transport case, order directly via Metav Werkzeuge or consult our specialists for application advice. Single gauge pin M323.I15 — 18.15 mm diameter, 50 mm length (Metav IndustryLine) A single gauge pin 18.15 mm designed for precise end‑size measurement and fixture alignment in inspection, toolmaking and quality control applications. High accuracy ±0.002 mm Diameter 18.15 mm for end‑size checks 50 mm length for secure fixture insertion Robust accuracy for routine inspection The solid construction of this workshop‑grade gauge pin delivers repeatable measurements where small deviations matter. With a declared tolerance of ±0.002 mm, the component provides a reliable, measurable reference for end‑size verification and plug‑gauge substitution in everyday shop use. The compact design and balanced mass reduce handling variability, so setup time is minimised and process stability improves. Material choice that supports wear resistance Manufactured from special steel, the pin combines surface hardness with dimensional stability to withstand regular use in busy production environments. The material choice reduces flank wear and preserves the calibrated diameter over extended cycles, helping to maintain traceability of inspection results without frequent replacement. Practical dimensions for fixture and gauge stations At 18.15 mm diameter and 50 mm length, the pin is long enough to engage fixtures securely while remaining compact for dense gauge stacks. The length provides sufficient insertion depth to eliminate play in many clamping and checking arrangements, supporting consistent seating and straightforward integration into existing jigs and test benches. Ready for the workshop — single piece delivery Supplied as a single test pin, the item is tailored for targeted replacement or for use as a master reference in assembly and inspection tasks. Delivered in a protective transport case, the pin arrives ready for immediate incorporation into inspection benches, minimise handling damage and preserve the reference surface during transit. For targeted precision in end‑size inspection, request the M323.I15 from Metav Werkzeuge — our Emmerich team provides product selection support and practical advice for integrating this gauge pin into existing inspection processes Technical data SKU: M323.I15 GTIN: 4061905449291 Designation: Single gauge pin, 18.15 mm diameter, 50 mm length Facts Diameter: 18.15 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Workshop version Material: special steel Supplied as single test pin Delivered in a protective transport case Intended use: end‑size checks, fixture alignment, inspection FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to an accuracy of ±0.002 mm, making the M323.I15 suitable for precise end‑size verification in workshop environments. Is the pin suitable for heavy‑duty shop use? Yes. The workshop‑grade construction and special steel material used for the M323.I15 support regular handling and frequent insertion into fixtures. Can this pin replace a worn plug gauge for quick checks? The single gauge pin offers a stable reference for quick plug‑type checks and fixture set‑ups; it is supplied as a standalone test pin for targeted replacement or use in gauge stacks. How should the gauge pin be stored to maintain accuracy? Store the M323.I15 in its protective transport case when not in use and avoid contact with abrasive or corrosive substances to preserve the reference diameter. Which tasks is the pin primarily designed for? This measurement pin is intended for end‑size checks, fixture alignment and other inspection tasks where a fixed diameter reference is required in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.16mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
The combination of compact dimensions, workshop-grade material and a tight ±0.002 mm tolerance makes this test pin an efficient choice for repeatable fit checks and end‑measurement tasks; its 18.16 mm diameter and 50 mm length provide a stable reference in inspection jigs. Order it directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin, single, 18.16 mm Ø × 50 mm — Metav IndustryLine Gauge pin, single, 18.16 mm Ø × 50 mm is a precision measurement pin for workshop inspection and dimensional verification in production and assembly environments Workshop-grade precision ±0.002 mm Diameter 18.16 mm for accurate fits 50 mm hardened special-steel body Delivered in protective transport case Stable reference for routine fit and end‑measurements The M323.I16 gauge pin serves as a compact, repeatable reference for checking bore clearances, seating depths and assembly fits. Classified in the micro class (10–100 mm), this size range balances reach and stiffness for handheld inspection and fixture use. With a declared tolerance of ±0.002 mm, the pin supports reliable go/no‑go assessments and reduces the need for iterative adjustments, helping to maintain a steady production flow and lower scrap rates. Durable construction for workshop conditions Manufactured from special steel and specified as a workshop version, the pin withstands regular handling in engineering and maintenance settings. The hardened body keeps the gauge resistant to wear, preserving dimensional integrity over repeated use. Supplied in a protective transport case, the item is ready for shop-floor deployment and retains its calibrated geometry during storage and transit, which contributes to consistent measurement outcomes and longer service life. Practical handling and integration into inspection routines Compact dimensions and a moderate mass make the pin straightforward to position by hand or within a fixture; the nominal 50 mm length provides useful engagement without excess overhang. Its form factor simplifies insertion into jigs and test stacks while the precise diameter ensures consistent seating. Use in combination with bench comparators or simple visual checks to verify component interfaces quickly, thereby improving throughput and measurement traceability in day‑to‑day quality control. For workshop-ready precision from Metav IndustryLine, request the M323.I16 gauge pin via Metav Werkzeuge — our Emmerich team can advise on suitability and delivery options Technical data Article number: M323.I16 GTIN: 4061905449307 Category: Messstifte Facts Diameter: 18.16 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Version: workshop execution Delivered in protective transport case ECLASS: 21170231 FAQ What is the intended use for this gauge pin? The gauge pin M323.I16 is intended for fit checks, end‑measurements and fixture verification in workshop and production environments. How precise is the diameter control on this pin? Diameter control is specified at ±0.002 mm, providing a high level of repeatability suitable for routine inspection tasks. Is the pin supplied ready for immediate use? Yes, the gauge pin is delivered protected in a transport case and ready for integration into inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.17mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
For reliable end‑measure verification, choose the single gauge pin with a precise Ø 18.17 mm diameter and 50 mm length, machined to a tight ±0.002 mm tolerance and made from durable special steel. Order the part via Metav Werkzeuge for consistent inspection throughput or consult the Metav team for specification support. Gauge pin M323.I17 — Single precision probe, Ø 18.17 mm × 50 mm (Metav IndustryLine) The gauge pin M323.I17 is a compact end‑measure probe intended for accurate go/no‑go checks, fixture set‑up and calibration tasks in workshop and inspection environments. Precision ground Ø 18.17 mm, tolerance ±0.002 Workshop version with robust finish Made from special steel for wear resistance Reliable, repeatable checking to speed up quality control The precision‑ground gauge pin delivers a reproducible reference for end‑measure tasks, reducing setup time and minimising rework. With a nominal Ø 18.17 mm and a declared ±0.002 mm form tolerance, this probe is suitable for micro‑accurate pass/fail verification and alignment operations where dimensional certainty shortens inspection cycles. The compact 50 mm length keeps handling straightforward while providing sufficient engagement for fixture locating; the combination of geometry and finish translates directly into measured time savings on the shop floor. Durable material and workshop design for everyday use Manufactured from special steel, the pin offers enhanced wear resistance compared with untreated alternatives, supporting consistent performance under repeated contact and light loading. The workshop version finish resists surface damage during handling and reduces fretting at seating points. This robustness preserves the ±0.002 mm performance window over many inspection cycles, so maintenance intervals are extended and replacement frequency is reduced — a practical economy for busy production and assembly environments. Compact handling that integrates with fixtures and gauges At a weight of 0.15 kg and a slender profile, the probe is easy to seat into locating bores or gauge blocks and to transport between measurement stations. The geometry suits fixture set‑up, go/no‑go plugs and end‑measure arrays where space is limited but precision remains essential. Because the item is a single, precision‑machined pin, it integrates cleanly into modular inspection kits and replacement schedules, supporting predictable stocking and straightforward inventory control for quality departments. Specify the Metav IndustryLine gauge pin for precise end‑measurement tasks — contact Metav Werkzeuge in Emmerich for advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.I17 GTIN: 4061905449314 Category: Messstifte Brand: Metav IndustryLine Facts Diameter: 18.17 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Precision ground finish Workshop version for robust use Single gauge pin for end‑measure applications Material: special steel FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.I17 is specified with a ±0.002 mm tolerance, suitable for fine inspection and go/no‑go verification. Which material is the pin made from? This probe is manufactured from special steel, selected for its wear resistance and stable surface finish. Is the pin suitable for fixture locating and alignment? Yes, the slender 50 mm length and precision ground diameter make the pin well suited to fixture locating, alignment and modular gauge sets. How is the item identified for ordering? Order using the SKU M323.I17; the product is also listed under GTIN 4061905449314 for catalogue and procurement systems. What kind of applications is this probe designed for? Designed for workshop inspection, go/no‑go checks and end‑measure verifications where a compact, high‑precision reference pin is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.18 mm Gauge Pin Length 50 mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, exact 18.18 mm sizing and a tight ±0.002 mm tolerance to secure repeatable end-measure checks; order the gauge pin directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Gauge pin M323.I18 — single inspection pin, 18.18 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.I18 is a workshop-grade inspection pin designed for precise end‑measure verification and bore checking in production and maintenance environments. Single precision gauge pin 18.18 mm diameter Length 50 mm for standard inspection setups Special steel construction for wear resistance Workshop-grade design for everyday industrial use Reliable, repeatable checks with minimal setup The M323.I18 functions as a straightforward, single-piece inspection tool for manufacturers and workshop technicians who require fast, repeatable checks of bore diameters and end measures. Ground to a fixed diameter of 18.18 mm, the pin delivers a consistent reference that simplifies go/no‑go decisions on the shop floor. The specified ±0.002 mm tolerance ensures that the pin meets tight measurement criteria, reducing the need for time‑consuming secondary checks and supporting efficient quality workflows. Built to withstand routine use while preserving accuracy Constructed from special steel, the pin resists wear under repeated insertion and handling, which preserves dimensional integrity over many cycles. The 50 mm length offers a practical engagement depth for common inspection tasks without excess overhang, keeping handling comfortable and improving alignment during measurement. This combination of durability and ergonomic sizing reduces downtime caused by tool changeovers and contributes to a predictable inspection routine in maintenance and production lines. Clear technical attributes that integrate with existing inspection processes As a single, workshop-grade gauge pin, the item is intended for straightforward insertion checks and end‑measure comparisons. Its compact format makes it usable at benches, in fixtures or as a reference during assembly operations. The simple geometry and standard diameter support compatibility with common holding devices and alignment jigs, enabling integration into existing quality control procedures without additional tooling investments. Efficiency and quality assurance tailored for industry use Using a defined reference like this pin reduces subjective judgement in visual or tactile checks and supports a measurable, auditable inspection step. The lightweight construction (approx. 0.15 kg) keeps handling quick and safe, while the robust material choice lowers lifecycle costs by extending service intervals. For production managers and quality engineers, the pin represents a small but effective component to uphold precision across repetitive tasks and to aid traceable inspection routines. Contact Metav Werkzeuge for application support or to confirm suitability for specific bore checks — Metav’s Emmerich team can advise on integration and delivery options Technical data SKU: M323.I18 GTIN: 4061905449321 Category: Gauge pins Facts Diameter: 18.18 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version FAQ What is the intended use of this gauge pin? The M323.I18 gauge pin is intended for end‑measure verification and bore checking in workshop and production settings where a fixed reference diameter is required. What tolerance does the gauge pin provide? The gauge pin is supplied with a tolerance of ±0.002 mm, suitable for tight inspection limits in routine quality checks. Which materials and environments suit this inspection pin? Made from special steel, the pin is designed for general workshop use and daily handling; it performs well in standard industrial environments where wear resistance is required. Is the gauge pin available individually or in sets? This entry describes a single gauge pin (SKU M323.I18) supplied as an individual inspection element for use in bespoke inspection setups. Can this pin be used with existing holding fixtures? Yes; the straight cylindrical form and standard diameter make it compatible with common jigs and fixtures for alignment and checking operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.19mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the workshop-grade construction, 18.19 mm diameter and ±0.002 mm tolerance for repeatable end-measure checks; the 50 mm shaft provides stable handling during inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single 18.19 mm, 50 mm length — Metav IndustryLine workshop grade Gauge pin, single 18.19 mm, 50 mm length is a workshop-grade inspection pin designed for end-dimension verification and routine gauging in production and quality control environments. Precision diameter 18.19 mm Length 50 mm for stable handling Tolerance ±0.002 mm Made from special steel, workshop grade Supplied in transport case Repeatable end-dimension checks with workshop robustness This inspection pin is built for consistent performance in busy production areas. The 18.19 mm nominal diameter combined with a ±0.002 mm variation ensures that the pin functions as a reliable reference for end-measure verification and fit checks. Because the shaft measures 50 mm overall, handling is stable during insertion and extraction, reducing operator-induced wobble and improving repeatability. The result is faster inspection cycles and fewer measurement outliers when integrating simple plug checks into a quality routine. Material choice and durability suited to daily use Constructed from special steel in a workshop-grade finish, the pin balances wear resistance with ease of handling. The chosen material maintains dimensional stability under frequent use and resists typical workshop contaminants; this supports a longer service life compared with softer gauges. The design prioritises straightforward maintenance: periodic cleaning and visual inspection keep the reference geometry intact, helping to sustain measurement reliability across numerous production shifts. Accuracy that supports practical quality control With a declared variation of ±0.002 mm, the pin bridges standard workshop needs and higher-precision tasks where fine tolerances matter. This level of accuracy is appropriate for end-measurement controls, assembly fits and verification of machined bores where sub-millimetre conformity is required. The compact, single-pin format allows integration into existing gauging processes without the need for complex fixtures, offering a pragmatic route to tighter in-process control and fewer downstream rejects. Practical handling, storage and supply advantages Delivery in a dedicated transport case protects the pin during storage and transit, reducing the risk of nicks and contamination that can invalidate a reference surface. The single format keeps inventory simple and allows fast replacement when gauges show wear. Supplied by Metav IndustryLine and distributed from Emmerich, the item is part of a broader portfolio that supports straightforward replenishment and consistent quality across workshops and small production facilities. For supply or technical clarification on Metav IndustryLine gauge pins, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 — specialist advice and prompt delivery are available Technical data Article number: M323.I19 GTIN: 4061905449338 Manufacturer: Metav IndustryLine Facts Diameter: 18.19 mm Length: 50 mm Tolerance / variation: ±0.002 mm Weight: 0.15 kg Special features Workshop execution Material: Special steel Supplied in transport case Single inspection pin FAQ What materials is the pin made from? The pin is manufactured from special steel; the Metav IndustryLine gauge pin (M323.I19) is designed for workshop durability and wear resistance. How precise is the gauge pin for fit checks? Declared variation is ±0.002 mm, which positions the pin for precise end-dimension verification and assembly fit inspections with reliable repeatability. Is the pin delivered ready to use and protected in transit? Yes. The gauge pin is supplied in a transport case to protect the reference surface during storage and transport. Which tasks is this inspection pin suited for? The pin is intended for end-measure verification, gauging of bores and simple assembly fit checks where a stable single reference is required. Can this pin be used in manual production lines? Yes; the 50 mm shaft length and workshop-grade construction make the pin well suited to manual insertion checks and repeat inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.1mm Test Pin Single 50mm Length Workshop Version - Metav IndustryLine
Taking advantage of a compact, workshop-grade design and ±0.002 mm tolerance, this gauge pin delivers reliable end-measure checks and consistent fit verification in production environments; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for technical advice. Gauge pin M323.I10 — Single inspection pin, 18.10 mm Ø, 50 mm length (Metav IndustryLine) The Gauge pin M323.I10 is a single, workshop-grade inspection pin intended for precise end‑measure and fit checks in general inspection and fixture applications. Workshop-grade inspection pin Diameter 18.10 mm, length 50 mm Accuracy ±0.002 mm Supplied in protective transport case Precision that supports reliable production decisions A compact inspection pin provides a clear, reproducible reference for dimensional checks and assembly verification. With a diameter of 18.10 mm and an accuracy of ±0.002 mm, this test pin is engineered to detect minute deviations that matter in tight-tolerance parts. Using a defined, hardened reference pin reduces measurement uncertainty and speeds up decision-making on the shop floor, supporting consistent quality control and fewer reworks. Built for workshop use and secure transport The workshop version is constructed from special steel, offering high wear resistance for frequent handling and insertion cycles. Its 50 mm length and modest mass make it simple to position within jigs or fixtures, while being robust enough for daily use. The item is supplied in a protective transport case, easing safe storage and reducing the risk of damage in transit — a practical detail that helps maintain the pin’s reference condition over time. Practical compatibility and inspection workflows As a single inspection element, this pin is suited for end‑measure, fit and clearance checks in assembly, toolmaking and maintenance routines. The compact format integrates easily into existing inspection benches or mobile measurement sets and can serve as a quick master for visual and tactile checks. Traceability is supported by the included identifiers, allowing straightforward documentation of inspection tools within production records. Choose the Metav IndustryLine gauge pin for dependable, workshop-ready reference checks and contact Metav Werkzeuge for order and specification support — Metav Werkzeuge is available to advise on integration into existing quality processes Technical data Article number: M323.I10 GTIN: 4061905449246 Weight: 0.15 kg Numbers / Core technical data Diameter: 18.10 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Supplied in protective transport case FAQ What is the intended use for this inspection pin? The inspection pin M323.I10 is designed for end‑measure and fit checks in assembly, toolmaking and inspection routines where a precise cylindrical reference is required. What accuracy can be expected from the pin? The M323.I10 provides an accuracy of ±0.002 mm, making it suitable for tight tolerance verification in workshop and production environments. Which material is used for this test pin? This inspection pin is made from special steel, selected for wear resistance and durability during frequent use. How is the gauge pin delivered and protected? The pin is supplied in a protective transport case to prevent damage in transit and to preserve reference integrity during storage. Is the pin identifiable for inventory and traceability? Yes, the product is supplied with identifiers including GTIN 4061905449246 and article number M323.I10 for clear traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.21mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of precise ±0.002 mm tolerance together with robust special steel construction and a 50 mm engagement length for reliable go/no‑go checks and alignment tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I21 — precision plug gauge, 18.21 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.I21 is a workshop‑grade reference pin for accurate bore gauging, alignment and dimensional verification in production and inspection routines. High tolerance ±0.002 mm Manufactured from special steel 50 mm length for stable seating Supplied in a protective transport case Consistent inspection results through tight tolerance control The ±0.002 mm tolerance class places this reference pin in the high‑precision segment suitable for demanding workshop inspections. As a hardened, single‑piece gauge pin, it provides a stable datum for bore gauging and alignment tasks where repeatability is essential. The numerical specification allows straightforward integration into quality procedures and ensures comparability of measured parts; technicians and inspection staff benefit from fewer ambiguous results and a clearer pass/fail decision when using calibrated reference gauges. Robust material choice for everyday workshop use Construction from special steel gives the pin a balance of wear resistance and dimensional stability under regular handling. The workshop version design takes account of everyday mechanical stress: socketing and seating remain repeatable over many cycles, with a mass that contributes to steady engagement without being unnecessarily heavy. Where common stainless options are not specified, the material selection still supports durable performance for general industrial and toolroom tasks. Practical handling that reduces downtime At 50 mm overall length the pin reaches sufficient depth for most standard bores while remaining easy to position by hand or with simple clamping aids. The single‑piece supply format simplifies inventory management and traceability in inspection logs. Critical features such as the nominal diameter 18.21 mm and documented tolerance allow direct referencing in measurement plans and work instructions, reducing setup time and clarifying acceptance criteria during audits. Packaging and workshop logistics aligned to real needs Delivery includes a protective case for transport, which eases storage and prevents transit damage to precision surfaces. The workshop construction and supplied transport case support mobile inspection routines and reduce the risk of surface abrasion during handling. For procurement teams, the compact footprint of this component simplifies stocking alongside other precision tools without the need for elaborate storage solutions. Contact Metav Werkzeuge for tailored advice on integrating the M323.I21 gauge pin into inspection routines and request availability from our Emmerich warehouse Technical Data SKU: M323.I21 GTIN: 4061905449826 Material: Special steel Feature: Workshop version Facts Nominal diameter: 18.21 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Single item supply Protective transport case included Suitable for go/no‑go and alignment checks FAQ What tolerances can be expected from this gauge pin? The M323.I21 gauge pin from Metav IndustryLine is manufactured to a tolerance of ±0.002 mm, making it suitable for high‑precision workshop inspection. Is the pin suitable for repeated use in a production environment? Yes; the M323.I21 is a workshop‑grade pin produced from special steel and supplied in a protective case to preserve surface integrity during repeated use. For which applications is this gauge pin intended? Typical uses include bore gauging, alignment checks and end‑dimension verification on components where an 18.21 mm reference is required. Does the product include special packaging for transport? Delivery of the M323.I21 includes a protective transport case to reduce the risk of damage during handling and transit. Can the M323.I21 be used as a reference in traceability documentation? Yes; the clear SKU and GTIN allow the gauge pin to be recorded in inspection plans and traceability records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.22mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, fine tolerance of ±0.002 mm, and simple handling for dependable in‑process checks; the pin’s Ø 18.22 mm diameter and 50 mm length make it a compact reference for end‑dimension controls. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin (single) Ø 18.22 mm, 50 mm length — Metav IndustryLine The Gauge pin (single) Ø 18.22 mm, 50 mm length is a workshop‑grade measuring pin for end‑dimension checks, fixture verification and repeatable reference measurements in metalworking environments. Workshop version for robust industrial use Diameter Ø 18.22 mm for end-dimension checks Toleranced to ±0.002 mm for fine accuracy Supplied in protective transport box Built for workshop reliability and repeatable checks This measuring pin is designed as a workshop‑grade reference tool, manufactured from special steel to withstand routine handling and light knocks during setup. The compact 50 mm length keeps the pin stable in common holders and fixture pockets while the Ø 18.22 mm diameter aligns with standard end‑dimension checks. Robustness reduces the need for frequent replacement, supporting steady operation in production and assembly stations. Precision that supports quality control processes The pin is manufactured to a close tolerance of ±0.002 mm, which provides a measurable improvement in repeatability for gauging and go/no‑go checks compared with coarser workshop gauges. This level of precision is suitable for many inspection tasks where small deviations matter; the tight tolerance helps to reduce false rejects and improves the reliability of pass/fail decisions in the quality workflow. Simple handling and integration into fixtures With a weight of approximately 0.15 kg and a straight cylindrical form, the pin is easy to position in standard gauge blocks, fixture pockets and inspection jigs. The single‑piece design minimises play and keeps repeatability high when used as a reference or alignment element. Supplied in a protective transport box, it arrives ready for use on the shop floor and for safe storage between operations. Traceability and identification for workshop logistics The pin is identified by SKU M323.I22 and GTIN 4061905449833, which supports inventory tracking and procurement processes. Clear labelling and compact packaging simplify storage and replacement planning, so the measuring pin can be integrated into tool crib systems or fixture kits without additional repackaging. For assured dimensional control choose the Metav IndustryLine gauge pin — contact Metav Werkzeuge in Emmerich for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.I22 GTIN: 4061905449833 Manufacturer: Metav IndustryLine Measurements & tolerances Diameter: 18.22 mm Length: 50 mm Accuracy / Tolerance: ±0.002 mm Weight: 0.15 kg Features & delivery Material: special steel Workshop version Supplied in protective transport box Single measuring pin FAQ What is the primary application for this gauge pin? The gauge pin is intended as a workshop reference for end‑dimension checks, fixture set‑up and alignment tasks; the Ø 18.22 mm size suits components and jigs that accept standard cylindrical reference pins. What level of accuracy does the measuring pin provide? The pin is produced with a tolerance of ±0.002 mm, offering fine repeatability for routine inspection and gauging operations. Is the pin delivered ready for safe storage and transport? Yes, the measuring pin is supplied in a protective transport box to reduce handling damage and to simplify storage between uses. Which material is the pin made from, and why does that matter? The pin is made from special steel, chosen for wear resistance and dimensional stability in workshop conditions, which helps maintain the specified tolerance over time. How is the item identified for inventory or reordering? The product is listed under SKU M323.I22 and GTIN 4061905449833 to support inventory control and straightforward reordering Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.24mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Accurate end-dimension verification is achieved with the combination of a true 18.24 mm diameter, a fine ±0.002 mm tolerance and a compact 50 mm length; this results in repeatable reference checks and fewer rejected parts on the production line. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored application advice. Gauge pin, single, 18.24 mm — 50 mm length (M323.I24) by Metav IndustryLine The gauge pin, single, 18.24 mm is a precision reference plug designed for end‑dimension inspection, fixture set‑up and pass/fail checks in workshop metrology. Precision diameter 18.24 mm with ±0.002 mm tolerance 50 mm length in durable special steel Workshop design for robust everyday use Single item for accurate end-dimension checks Ensure reproducible dimensional control with micro-level accuracy The compact reference element is engineered for precision measurement tasks where consistent results matter. With a nominal diameter of 18.24 mm and a specification variance of ±0.002 mm, the component serves as a reliable datum for end‑dimension verification, plug‑gauge setting and dimensional go/no‑go checks. The stated tolerance represents the maximal deviation expected during production and inspection; placing such a reference into a gauge or fixture reduces uncertainty, shortens inspection time and supports predictable quality outcomes on the shop floor. Durable construction that maintains form and fit during repeated use Manufactured from special steel, the 50 mm length provides a balance between accessibility in assembly jigs and sufficient engagement for stable seating. The workshop design focuses on repeatable contact geometry, minimising wear and preserving the functional diameter across multiple cycles. A single, compact reference like this reduces handling complexity in confined fixtures and is suited to routine tactile inspection and simple plug checks where mechanical robustness is required without excess bulk. Integrate directly into measurement workflows for efficiency gains As a single gauge pin, the component simplifies stockkeeping and allows rapid replacement or re‑setting of gauges. Traceability is supported via the SKU and GTIN for procurement and inventory management. Using a defined reference plug throughout production reduces adjustment variance between operators and equipment, leading to fewer process interruptions and lower rework rates. For customers seeking consistency, the combination of measured tolerance, material choice and pragmatic design delivers a measurable improvement in inspection throughput and component conformity. For application guidance or to confirm compatibility with existing gauges, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange a supply of Metav IndustryLine gauge pins Technical Data Article number: M323.I24 GTIN: 4061905449857 Label: Prüfstift, einzeln, 18,24 mm Länge 50 mm Facts Diameter: 18.24 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop design Single item supply Category: Gauge pins FAQ What is the intended use of this gauge pin? The gauge pin M323.I24 is intended as a precision reference plug for end‑dimension inspection, fixture set‑up and basic go/no‑go checks in workshop and production environments. Does the gauge pin come with a certificate of calibration? The product data does not specify a calibration certificate; for details on calibration services or certification options for the gauge pin, Metav Werkzeuge can provide further information. Which materials is the pin suitable for when used as a reference? As a reference element, the pin is material‑agnostic in application; it is made from special steel and is designed to be used as a dimensional standard rather than a cutting or forming tool. How is the gauge pin identified for reordering or stock control? The gauge pin is identified by SKU M323.I24 and GTIN 4061905449857 for procurement and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.25mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.002 mm accuracy, special steel construction and a compact 50 mm length for reliable, repeatable diameter checks. Order the gauge pin directly via Metav Werkzeuge or consult our advisors if assistance is required. Gauge Pin M323.I25 — single test pin, Ø 18.25 mm, 50 mm length (Metav IndustryLine) Gauge Pin M323.I25 is a single inspection pin designed for precise end‑diameter verification and locating tasks in assembly fixtures and inspection routines. ±0.002 mm tolerance for tight checks Special steel for wear resistance Compact 50 mm length for confined spaces High-precision measurement where it matters The inspection pin delivers a measured tolerance of ±0.002 mm, making it suitable for demanding quality control and fine inspection tasks. Built for repeatable contact measurement, this component reduces ambiguity during end‑dimension checks and supports consistent pass/fail decisions. The fine tolerance is particularly valuable when verifying mating diameters, locating holes or confirming end‑forms where small deviations can affect assembly integrity. With such accuracy, the pin functions as a reliable reference part in metrology benches and fixture set‑ups. Durable construction and compact handling Manufactured from special steel, the test pin combines surface hardness with resilience against wear. The 18.25 mm diameter and 50 mm overall length create a compact, stiff profile that resists bending during short contact measurements and handling. This balance of stiffness and size simplifies placement in tight fixtures and allows faster throughput on inspection stations. Where repeated insertion is required, the material choice extends service life and maintains dimensional stability over many cycles. Practical integration into workshop workflows The single test pin is a straightforward element for both production lines and bench inspection. As a simple locating and gauging component, it supports quicker set‑up times and predictable measurement outcomes, contributing to reduced inspection latency. The modest weight and compact form factor make it easy to store alongside other gauge tools and to include in pre‑assembled kits for jig and fixture maintenance. For operations seeking to combine precision with operational efficiency, this component complements existing measuring equipment without complicating the process. For robust diameter checks with Metav IndustryLine precision, contact Metav Werkzeuge for a stock check and tailored recommendation to integrate this gauge pin into current inspection processes. Technical data Article number: M323.I25 GTIN: 4061905070853 Manufacturer: Metav IndustryLine Material: Special steel Facts Diameter: 18.25 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Single test pin Workshop version End‑dimension application Category: Gauge pins FAQ What is the declared tolerance of this inspection pin? The declared tolerance for the gauge pin M323.I25 is ±0.002 mm, suitable for fine inspection tasks and precise locating operations. Which material is used for the pin, and what does that mean for wear resistance? The pin is made from special steel; this material provides improved wear resistance and dimensional stability during repeated use. Can this test pin be used in fixture locating and gauging stations? Yes; the single test pin M323.I25 is intended for locating and end‑diameter checks in fixtures and inspection setups where a compact, precise reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.26mm Test Pin, Single, 50mm Length, Special Steel, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial robustness, sub‑millimetre accuracy and compact length for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or request technical advice from our consultants. Gauge pin M323.I26 — single gauge pin, 18.26 mm diameter, 50 mm length (Metav IndustryLine) A single gauge pin, the M323.I26, engineered for precise end‑measure verification in workshop inspection and fixture testing. Workshop specification for daily industrial use Diameter 18.26 mm with ±0.002 mm tolerance 50 mm length for recessed bore and gauge checks Made from high‑grade special steel for durability Precise end‑measure results to reduce rework The gauge pin delivers a clear advantage where tight tolerances matter: a diameter of 18.26 mm combined with a verified accuracy of ±0.002 mm ensures repeatable fits and reliable go/no‑go assessments. Manufactured in a workshop specification, the component provides a defined reference for final dimension checks, reducing measurement uncertainty and the risk of costly rejects. Using a compact, single‑pin layout simplifies fixture design and speeds up routine inspections. Built to withstand everyday shop floor use With a 50 mm length the pin reaches into recessed bores and through‑holes while remaining easy to handle during serial checks. The special steel construction balances hardness and toughness for long service life under repetitive contact, maintaining dimensional stability across production runs. The workshop version is optimised for handling and impact resistance, which lowers replacement frequency and contributes to predictable maintenance intervals on inspection jigs and assembly stations. Efficient handling and consistent process control The M323.I26 is supplied as a single test pin for immediate use in inspection sequences and fixture integration. Its compact mass and form factor support fast cycle times and straightforward exchangeability in gauge blocks or pin rails, improving throughput in small‑batch and series production alike. The measurable benefit is consistent repeatability: fewer stoppages for recalibration and a more reliable quality flow when the pin is used as a fixed reference in control processes. Choose the Metav IndustryLine gauge pin for assured dimensional control — contact Metav Werkzeuge for specialist advice and dependable supply direct from Emmerich. Technical data Article number: M323.I26 GTIN: 4061905070860 Label: Gauge pin, single, 18.26 mm, length 50 mm Facts Diameter: 18.26 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins (Messstifte) SKU: M323.I26 FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.I26 is specified with a tolerance of ±0.002 mm, providing sub‑millimetre precision suitable for tight inspection routines. Is the M323.I26 suitable for recessed bore measurements? Yes; the 50 mm length of the M323.I26 is designed to access recessed bores and through‑holes commonly encountered in fixture and assembly checks. What material is used for the pin and how does that affect longevity? The pin is made from special steel, giving a balance of hardness and toughness that preserves diameter stability under repeated contact, enhancing service life. How is the product supplied for immediate use in the workshop? The M323.I26 is supplied as a single gauge pin ready for integration into existing inspection setups or pin rails. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.27mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-ready inspection tool that combines repeatable dimensional control with robust construction; the 18.27 mm diameter and 50 mm length offer a reliable reference for end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for specification advice. Test pin, single – 18.27 mm Ø, 50 mm length (Metav IndustryLine) The Test pin, single, 18.27 mm, 50 mm length serves as a precision inspection pin for end‑dimension verification and go/no‑go checks in workshop metrology. Workshop version for robust everyday use Precision diameter 18.27 mm with ±0.002 mm Supplied in transport case for safe storage Reliable dimensional control for routine inspection A compact inspection pin designed for frequent use in busy workshops, this gauge delivers consistent repeatability thanks to its tight manufacturing tolerance of ±0.002 mm. The pinned reference of 18.27 mm diameter is suited to end‑dimension tests and pass/fail checks where a clear, unequivocal result is required. By providing an unambiguous reference, the pin reduces interpretation time during quality checks and speeds up decision‑making on the shop floor, supporting a lean inspection routine and minimising rework. Built for handling and durability in workshop environments Manufactured from special steel, the pin combines surface hardness with dimensional stability so that the 50 mm length remains straight and usable under repeated insertion and contact. The workshop version specification prioritises robust finish and handling ergonomics; the modest mass (0.15 kg) makes transport between benches straightforward while the transport case included protects the reference surface during storage. These attributes make the pin a practical tool for both production lines and assembly jigs where frequent reference checks are needed. Integration into quality workflows and traceable inventory As a simple, single‑piece inspection tool, the pin slots easily into existing inspection routines and fixtures. Its straightforward geometry allows rapid visual and tactile verification without complex setup, helping maintain throughput in repetitive operations. For procurement and inventory control the item is identified via GTIN and SKU, which simplifies reordering and stock management. The Metav IndustryLine selection emphasises accessibility of precision tools for everyday industrial use, combining dependable manufacture with practical delivery options. For targeted dimensional control and workshop resilience, contact Metav Werkzeuge in Emmerich for availability and technical guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M323.I27 GTIN: 4061905070877 Weight: 0.15 kg Manufacturer: Metav IndustryLine Facts Diameter: 18.27 mm Length: 50 mm Accuracy: ±0.002 mm Mass: 0.15 kg Special features Material: Special steel Workshop version Supplied in transport case Single inspection/gauge pin FAQ What is the primary use of this inspection pin? The gauge pin is intended for end‑dimension verification and simple go/no‑go checks; the M323.I27 provides a clear reference for pass/fail inspection. What tolerance can be expected from the pin? The pin is produced to an accuracy of ±0.002 mm, offering high repeatability for routine workshop inspections. Which material is the pin made from, and does that affect care? The pin is made from special steel; light corrosion protection and careful handling of the reference ends preserve long‑term accuracy. How is the test pin delivered? The item is supplied in a transport case to protect the measuring faces during storage and transport. Can this pin be integrated into existing fixtures? Yes — the simple geometry and robust finish mean the pin fits most fixture designs used for end‑dimension checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.28mm Gauge Pin 50mm Length Workshop Version, Special Steel ±0.002 - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, precise 18.28 mm diameter control and a compact 50 mm working length for reliable end‑measure checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.I28 Gauge Pin – Single 18.28 mm Diameter, 50 mm Length (Metav IndustryLine) The M323.I28 is a single precision gauge pin intended for routine end‑measure and reference checks in workshop and inspection environments. Precision diameter 18.28 mm 50 mm working length for end‑measure controls Special steel construction for long service life Workshop design for frequent use Consistent dimensional control through measurable accuracy The gauge pin offers a declared positional tolerance of ±0.002 mm, making it suitable where tight dimensional control is required. Constructed from special steel, the pin retains form under repeated use and resists superficial wear that would otherwise affect gauges and reference plugs. This combination of small diameter and fine tolerance supports faster decision‑making in inspection routines, reducing rework and ensuring that production parts meet specification with fewer iterative checks. Compact geometry that simplifies repetitive checks With a 50 mm working length and a compact profile, the pin is easy to handle on the shop floor and in a bench inspection setup. The modest mass (approx. 0.15 kg) minimises handling fatigue during repeated measurements while the workshop specification ensures the component is suited to everyday use rather than delicate laboratory only tasks. The design is therefore optimised for quick end‑measure verifications, where a stable reference diameter speeds up go/no‑go assessments and functional fits. Built for integration into calibrated workflows As a purpose‑made gauge pin, this item serves as a reliable reference for end‑measure and limit checks within a broader quality control regimen. The workshop execution denotes robustness for frequent handling; pairing this pin with existing gauge blocks or fixtures supports traceable inspection steps and efficient throughput. Clear, repeatable geometry aids compatibility with common measuring fixtures and simplifies documentation of measurement results during production runs. Contact Metav Werkzeuge today to specify the M323.I28 for workshop inspections or to receive guidance on integrating precision gauge pins into your quality processes Technical data Article number: M323.I28 GTIN: 4061905070884 Brand: Metav IndustryLine Category: Gauge pins / Messstifte Facts Diameter: 18.28 mm Length: 50 mm Mass: 0.15 kg Positional tolerance: ±0.002 mm Special features Material: Special steel Design: Workshop version Intended use: End‑measure and reference checks FAQ What tolerance can be expected from this gauge pin? The M323.I28 gauge pin is specified with a positional tolerance of ±0.002 mm, providing a high level of dimensional reliability for workshop inspections. Which materials is the pin made from and how does that affect longevity? The pin is manufactured from special steel; this material choice enhances wear resistance and maintains the reference diameter for extended service life under routine use. Is this pin suitable for end‑measure checks on small precision parts? Yes. The 18.28 mm diameter and 50 mm length make the M323.I28 suitable as a compact reference for end‑measure and fit checks on small to medium components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.2mm Gauge Pin 50mm Length Workshop Version, Special Steel In Plastic Case - Metav IndustryLine
Take advantage of the combination of tight tolerance, compact dimensions and durable construction for reliable end‑dimension checks; order directly via Metav Werkzeuge or consult our specialists if required. Gauge pin, single Ø 18.2 mm, length 50 mm — Metav IndustryLine Gauge pin, single Ø 18.2 mm, length 50 mm is a workshop-grade test pin for precise end‑measure verification and fixture set‑up in inspection and assembly jigs. High tolerance ±0.002 mm Precision Ø 18.2 mm diameter Hardened special-steel construction 50 mm length for compact fixtures Consistent measurement performance for workshop checks The gauge pin, single Ø 18.2 mm, length 50 mm delivers a tolerance of ±0.002 mm, a level of precision that supports reliable pass/fail checks and repeatable reference measurements. Such tight specification reduces uncertainty in go/no‑go judging and helps maintain consistent quality across batches. Constructed from special steel, the pin resists wear in routine use; this conserves dimensional integrity over many cycles and reduces the need for frequent replacements. The compact 50 mm length is purposefully chosen for tight fixturing where space is limited while maintaining handling convenience. Easy integration into fixtures and inspection workflows Designed as a single test pin, this component suits a range of workshop applications from simple go/no‑go gauges to adjustable fixture locators. The Ø 18.2 mm diameter provides a stable datum when mounted, helping to minimise lateral play and ensuring reliable seating in hardened bushings or locating holes. The workshop version finish balances service life and cost-efficiency, making it appropriate for production environments where parts are indexed frequently. For assembly lines and small inspection stations, this pin simplifies setup and shortens changeover times by providing a precise, repeatable reference surface. Durability, traceability and workshop value Robustness and traceable identification help to secure process confidence: the pin’s construction in special steel and the clear product identifiers (SKU and GTIN retained in the technical specification) support inventory control and replacement planning. Using precision components such as this test pin reduces scrap and rework by improving the first‑pass acceptance rate, which contributes directly to operational efficiency. Metav’s positioning as a precision partner emphasises accessible quality and dependable supply — a practical advantage for workshops seeking consistent measuring tools without complex procurement steps. For fixture set‑up and precise end‑dimension verification, rely on Metav IndustryLine gauge pins — contact Metav Werkzeuge GmbH in Emmerich for ordering or technical advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M323.I20 GTIN: 4061905449819 Manufacturer: Metav IndustryLine Facts Diameter: Ø 18.2 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Single test pin for end-dimension checks Workshop version FAQ What tolerance can be expected from this gauge pin? The pin is specified with a tolerance of ±0.002 mm, making it suitable for precision workshop inspections and go/no‑go checks. Is the pin suitable for fixture locating and repeatable reference points? Yes, the Ø 18.2 mm diameter and 50 mm length offer a stable locating surface ideal for fixture set‑up and repeated seating in jigs. What material is used for the pin and how does that affect durability? The test pin is made from special steel, chosen to provide wear resistance and dimensional stability under normal workshop use. How can this item be identified when ordering or replacing? Reference the SKU M323.I20 or the GTIN 4061905449819 for ordering and inventory purposes. Can this pin be used for tight tolerance laboratory measurement? The pin is a workshop‑grade precision component; its ±0.002 mm tolerance supports accurate inspection tasks, though laboratory environments requiring traceable calibration protocols should verify specific requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.31mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
High-precision 18.31 mm gauge pin in special steel with a declared tolerance of ±0.002 mm and a 50 mm working length delivers reproducible reference measurements for workshop inspection tasks; supplied as a workshop‑grade component in a protective case for safe transport. Order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I31 — single gauge pin, Ø 18.31 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.I31 is a workshop‑grade reference pin for quick bore checks and end‑dimension verification in assembly, inspection and toolmaking environments. Workshop‑grade finish Diameter 18.31 mm precision Tolerance ±0.002 mm Delivered in protective case Consistent reference for fast, reliable bore checks The M323.I31 serves as a stable reference for go/no‑go checks, seating tests and end‑dimension controls. With a nominal diameter of 18.31 mm and a declared dimensional tolerance of ±0.002 mm, the pin reduces measurement uncertainty and shortens inspection cycles by replacing improvised solutions. The 50 mm length provides sufficient engagement for repeatable contact while remaining easy to handle in jig and fixture operations. The result is a measurable improvement in throughput and fewer reworks. Robust design to withstand workshop conditions Engineered as a workshop‑grade tool, the pin is manufactured from special steel chosen for dimensional stability and resisting surface wear during repeated use. The compact mass (approx. 0.15 kg) and solid construction ensure steady seating in bores and minimise vibration during tactile checks. Supplied in a protective case, transport and on‑bench storage are simplified, reducing the risk of damage and preserving the pin’s precision between uses — a practical advantage in busy production areas. Inventory and traceability support for quality workflows Identification and ordering are straightforward: the item is listed as SKU M323.I31 with GTIN 4061905070914, easing stock management and procurement. The declared tolerance of ±0.002 mm (2 µm) positions the pin between routine workshop gauges and higher‑precision metrology tools, making it suitable as a reliable go/no‑go reference or as part of a gauge set for production control. Clear labelling and consistent dimensions help integrate the component into existing inspection procedures and documentation. For a dependable addition to workshop inspection tooling, request a quotation or technical consultation from Metav Werkzeuge — Metav IndustryLine quality, available from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.I31 GTIN: 4061905070914 Category: Gauge pins Label: Prüfstift, einzeln, 18,31 mm Länge 50 mm Facts Diameter: 18.31 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Supplied in protective case Single pin FAQ What is the declared dimensional tolerance of this gauge pin? The gauge pin M323.I31 is supplied with a declared tolerance of ±0.002 mm, suitable for fine workshop reference and routine inspection tasks. Which materials is the pin made from and how does that affect use? Manufactured from special steel, the pin offers good dimensional stability and wear resistance for repeated seating and inspection cycles in production environments. Is the pin delivered ready for use and protected in transit? Yes, the item is a workshop‑grade single pin supplied in a protective case to safeguard the measuring surface during transport and storage. How can the item be identified for inventory and procurement? The product is listed under SKU M323.I31 and GTIN 4061905070914 for straightforward ordering and stock control. For which inspection tasks is this gauge pin best suited? The pin is ideal for quick bore checks, seating tests and end‑dimension verification where a stable reference diameter of 18.31 mm and ±0.002 mm tolerance are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com