Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
18.32mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise workshop performance, a 50 mm shank and a diameter of 18.32 mm with a ±0.002 mm tolerance to reduce rework and ensure repeatable end‑dimension inspections; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 18.32 mm — workshop test pin with 50 mm length (Metav IndustryLine) A Gauge pin, single, 18.32 mm for robust workshop inspection and end‑dimension checks, presented in a workshop‑grade execution with a 50 mm shank for deeper bore probing. Workshop‑grade construction Diameter 18.32 mm, tolerance ±0.002 Length 50 mm in special steel Transport case included Precision that reduces rework and speeds inspection The ±0.002 mm tolerance delivers measurable benefits on the shop floor: fewer rejected parts, faster go/no‑go decisions and reduced re‑machining. Specified as a single inspection element, this gauge pin is manufactured for tight fits and repeatable contact surfaces, making it suitable for routine dimensional checks in assembly and quality control. The high tolerance converts directly into process reliability and predictable first‑time quality. Built for everyday workshop handling and wear resistance Designed as a workshop‑grade tool, the inspection pin is made from special steel that resists surface wear and preserves the contact geometry under frequent use. The 50 mm length provides enough reach for deeper bores and recessed features while remaining easy to handle during manual inspection or when used in simple fixtures. Delivery in a transport case protects the pin in storage and transit, maintaining measurement integrity until first use. Practical integration into inspection routines and fixtures This single test pin is ideal for end‑dimension checks, fixture setting, plug verification and quick go/no‑go assessments within production lines. Its straightforward form factor allows quick mounting in basic jigs or use as a master reference in pick‑and‑place stations. Supplied as an individual item for targeted verification tasks, the pin supports lean inspection strategies where compact, precise tools are preferred over larger gauge sets. Choose the Metav IndustryLine workshop test pin for dependable, shop‑ready inspection; Metav Werkzeuge provides straightforward supply and local stock from Emmerich for quick replenishment. Technical data Article number: M323.I32 GTIN: 4061905071560 Manufacturer: Metav IndustryLine Weight: 0.15 kg Length: 50 mm Diameter: 18.32 mm Material: special steel Accuracy: ±0.002 mm Workshop execution Transport case included Facts Length: 50 mm Diameter: 18.32 mm Weight: 0.15 kg Accuracy: ±0.002 mm Single item supply Special features Intended for end‑dimension checks Robust workshop design Supplied individually in a transport case Suitable for use in simple fixtures and jigs Category: gauge pin / inspection pin FAQ What tolerance does the pin offer? The gauge pin is specified with an accuracy of ±0.002 mm, suitable for fine inspection tasks where tight dimensional control is required; item reference M323.I32. What material is used for the pin? The test pin is manufactured from special steel, chosen for wear resistance and dimensional stability in routine workshop use. Is a case supplied with the pin? Yes, the product is delivered in a transport case to protect the surface and geometry during storage and transport. What inspection tasks is this pin suited for? The pin is intended for end‑dimension checks, plug verification, fixture setting and quick go/no‑go assessments in production and assembly. Is the item supplied individually or as a set? This entry is a single gauge pin supplied as an individual inspection element. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.33mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial‑grade durability, ±0.002 mm measurement accuracy and practical workshop handling for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin, single, Ø 18.33 mm, length 50 mm — test pin for precise end‑dimension checks by Metav IndustryLine The Gauge pin, single, Ø 18.33 mm, length 50 mm serves as a compact, high‑precision reference pin for verifying end dimensions and seating fits in workshop and inspection routines. High accuracy ±0.002 mm Diameter Ø 18.33 mm for fit verification 50 mm functional length, workshop version Delivered in transport case Precision that keeps production moving The M323.I33 gauge pin provides a measured tolerance of ±0.002 mm, a level of exactness that helps to reduce scrap and rework by tightening pass/fail boundaries in inspection steps. Constructed from special steel, the pin sustains repeated use in short‑run checks or fixture set‑ups while maintaining dimensional stability. Stated accuracy refers to the manufacturing tolerance of the pin itself, enabling confident comparisons against nominal bores or mating parts during quality control. Designed for routine workshop use and handling With a nominal diameter of Ø 18.33 mm and a 50 mm usable length, the pin combines reach with compactness for everyday fit checks and end‑dimension verification. The workshop version is concentrated on practical robustness and ease of handling; its low mass (0.15 kg) makes manual placement straightforward and repeatable. Delivery in a transport case protects the reference surface in transit and storage, preserving the calibrated condition and surface finish between uses. Easy integration into inspection workflows Traceability and inventory integration are supported by the clear identification of the item (SKU M323.I33, GTIN 4061905071577), which simplifies catalogue management and replacement planning. The pin is suitable as a reference element for go/no‑go fixtures, fixture set‑up or comparative checks of end dimensions. Backed by Metav’s supply network and quality filter in Emmerich, the component aligns with workshop standards and dependable resupply for both maintenance and production environments. Contact Metav Werkzeuge for application guidance on the Ø 18.33 mm gauge pin and secure shipment from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.I33 GTIN: 4061905071577 Manufacturer: Metav IndustryLine Facts Diameter: 18.33 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: special steel Workshop execution Delivered in transport case Category: gauge pin / test pin FAQ What is the stated tolerance of this gauge pin and what does it mean? The gauge pin has a stated manufacturing tolerance of ±0.002 mm; this indicates the maximum deviation from nominal diameter for the M323.I33 and supports precise end‑dimension checks with minimal uncertainty. Which applications suit this test pin best? The pin is intended for end‑dimension verification, fit checks and fixture set‑up in workshop and inspection environments where a compact, repeatable reference is required. Is the gauge pin suitable for regular workshop use? Yes; the workshop execution and special steel construction make the pin resilient to daily handling, and the transport case preserves the measurement surface between uses. How is the product identified for inventory and reordering? The item is listed as SKU M323.I33 with GTIN 4061905071577, which enables straightforward catalogue management and procurement. Does the pin come with any protective packaging? Delivery includes a transport case to protect the reference surface during storage and transit, reducing the risk of damage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.34mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Compact workshop reference: 18.34 mm diameter with ±0.002 mm tolerance and a 50 mm usable length provide stable, repeatable reference measurements; the special steel construction is designed for frequent use in inspection and jig setups and is supplied ready for secure transport. Order the gauge pin directly via Metav Werkzeuge or consult our technical team if guidance is required. M323.I34 Gauge pin — 18.34 mm Ø, 50 mm length (Metav IndustryLine) The M323.I34 gauge pin is a single precision test pin intended for workshop inspection, end‑measurement tasks and use as a reference in gauging fixtures. Precision tolerance ±0.002 mm Diameter 18.34 mm, length 50 mm Workshop version, durable special steel Supplied in protective transport case Consistent reference measurements for reduced rework A tight tolerance of ±0.002 mm makes this gauge pin a reliable reference for dimensional checks and go/no‑go gauging. The stated accuracy reduces measurement uncertainty and helps to identify non‑conforming parts early in the process, which supports faster corrective action and less rework. By using a compact, hardwearing test pin with defined dimensional stability, inspection routines become more predictable and traceable, improving production flow and quality documentation. Durable construction built for everyday workshop use Manufactured from special steel and released as a workshop version, the pin resists wear from frequent insertion and fixture contact while maintaining its measuring surface. The 50 mm usable length and solid shank combine stiffness with easy handling, so repeatable seating and alignment in jigs is straightforward. Supplied in a protective transport case, the component arrives ready for secure storage and reduces the risk of transport damage — an important detail when precision tolerances must be preserved between jobs. Compact size for precision micro‑work and gauge integration With a diameter of 18.34 mm, this gauge pin sits in the micro range of precision reference tools, ideal where compact dimensions and minimal overhang matter. The pin performs well in fixture setups, end‑measurement checks and small‑batch inspection tasks, where a short, rigid reference element avoids bending and measurement error. Its dimensions and finish make it compatible with common gauging systems and mechanical holders used in workshop metrology, providing a pragmatic balance between reach and stiffness. Choose the Metav IndustryLine M323.I34 gauge pin for precise workshop reference measurements and request tailored guidance from Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.I34 GTIN: 4061905071584 Label: Single gauge pin, 18.34 mm, length 50 mm Facts Diameter: 18.34 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop execution Supplied in protective transport case FAQ What tolerance can be expected from this gauge pin? The M323.I34 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for fine workshop inspection and reference measurements. Is the product supplied ready for storage and transport? Yes. The gauge pin is delivered in a protective transport case to reduce the risk of damage during handling and transit. For which tasks is this pin most suitable? This single gauge pin is designed for end‑measurement checks, gauging fixtures and small‑scale inspection applications where a compact, rigid reference is required. What material is used for the pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability so that frequent use in fixtures does not rapidly degrade the measuring surface. Can this pin be integrated into existing gauging systems? Its compact diameter and 50 mm length make it compatible with common mechanical holders and gauging fixtures used in workshop metrology; the design supports repeatable seating and alignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.35mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Combine high repeatability (±0.002 mm) with a compact 50 mm length and special steel construction to secure reliable end‑measurements in workshop environments. Order this precision gauge pin directly via Metav Werkzeuge or request advice from our consultants for application‑specific selection. Gauge pin, single — 18.35 mm Ø, 50 mm length (Metav IndustryLine) A single gauge pin 18.35 mm designed for precise end‑measurement and fit verification in workshop inspection and assembly tasks Workshop version for robust everyday use 18.35 mm diameter for precise fit checks Accuracy ±0.002 mm for fine measurement Compact 50 mm length for confined spaces Repeatable precision where tolerance matters The M323.I35 is manufactured to deliver ±0.002 mm tolerance, placing it well above common workshop measuring tools in terms of reproducibility. This level of accuracy is meaningful when gauging mating parts or performing final checks on turned bores: it reduces uncertainty in pass/fail decisions and shortens inspection loops. Compared with typical digital calipers (standard display resolution 0.01 mm and error margins around ±0.02–±0.03 mm), the pin provides a decisive improvement for fine tolerancing, enabling tighter control of assembly clearances and tool set‑up. Built for workshop handling and long service life Constructed from special steel and offered in a workshop version, the pin combines surface hardness with dimensional stability for frequent use. The 50 mm length and 18.35 mm diameter create a compact gauge that is easy to manipulate in confined fixtures or on jigs, while its mass and geometry minimise flex during handling. The robust finish supports repeated seating in bores and reduces wear effects that otherwise compromise measurement consistency, so inspection routines remain efficient and predictable. Clear application fit and measurement class This gauge pin is part of the micro class of measuring pins (measurement range 10–100 mm), which is the preferred group for fine mechanical work and small assemblies. Typical uses include end‑measurements, fit checks of cylindrical bores, alignment checks and verification of mating components in fixtures. The short shank and solid construction make it particularly suitable for precision tasks in toolmaking, small‑part machining and quality control stations where space and repeatability are decisive. Traceability and workshop integration For stock management and traceability the pin carries a clear identifier (SKU M323.I35) and GTIN for barcode systems. The compact geometry supports easy storage in inspection sets and allows straightforward integration into existing gauging kits or fixture nests. Where batch control and audit trails are required, the item’s technical data facilitates documentation in quality records and measurement plans without ambiguity. For dependable small‑part inspection, request availability or technical advice from Metav Werkzeuge — our Metav IndustryLine specialists will recommend the right gauge pin and measurement workflow for the intended application. Technical data Article number: M323.I35 GTIN: 4061905071591 Manufacturer: Metav IndustryLine Core specifications Diameter: 18.35 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Features Material: Special steel Version: Workshop execution Category: Gauge pin (test pin) FAQ What tolerance does the gauge pin offer? The M323.I35 gauge pin provides a tolerance of ±0.002 mm, suitable for fine inspection tasks where high repeatability is required. Which tasks is this pin intended for? Typical applications are end‑measurements, bore fit checks and verification of mating parts during assembly and inspection processes. How is this product classified by measurement range? This item is classified in the micro range (10–100 mm), offering maximal precision for compact components and small assemblies. What material is the pin made from and how does that affect use? Manufactured from special steel, the pin offers wear resistance and dimensional stability for repeated workshop use in fixtures and gauges. How can this pin be tracked in inventory systems? Use the SKU M323.I35 and GTIN 4061905071591 for barcode labelling and integration into stock and quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.36mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact handling and workshop‑grade construction for reliable end measurements; order the gauge pin directly via Metav Werkzeuge or request specialist advice for integration into inspection routines. Gauge pin, single, Ø 18.36 mm, length 50 mm — Metav IndustryLine workshop version A gauge pin, single, Ø 18.36 mm, length 50 mm designed as a compact, workshop‑grade reference probe for fast end‑measurement, fixture setting and pass/fail checks. Workshop version, robust design Ø 18.36 mm precision diameter Tolerance ±0.002 mm accuracy Delivered in transport case Consistent reference for end‑measurement tasks As a hardened precision probe, this inspection pin provides a stable reference for end‑measurements and datum checks. The nominal diameter of 18.36 mm combined with a verified tolerance of ±0.002 mm yields tight repeatability in comparative tests and go/no‑go verifications. For shops that rely on short, reproducible checks — for example when aligning fixtures or verifying bore seating — the probe acts as a compact, traceable standard that reduces setup time while maintaining process control. Compact format that matches fine mechanical workflows Classified in the micro range (measurement capacity within 10–100 mm), the 50 mm length and compact body make the probe simple to handle and easy to position in tight assemblies. The 50 mm shaft offers sufficient engagement for end faces and shallow bores without excess overhang, while the modest mass (approx. 0.15 kg) improves manual stability during quick comparative measurements. This geometry is particularly suitable for precision workshop tasks where stiffness and low lever‑arm error matter more than long travel. Workshop durability with corrosion‑resistant construction Manufactured from special steel, the probe is finished for practical workshop use. The material choice balances surface hardness with resistance to wear during repeated seating operations, extending service life under normal inspection loads. Supplied as a workshop execution, the component is engineered to cope with everyday handling, while the inclusion of a transport case protects the reference surface during storage and transit — a pragmatic safeguard for maintaining accuracy over time. Traceable identification and simple logistics The inspection pin ships as a single item and is identified for stock and traceability under SKU M323.I36 and GTIN 4061905072093. The compact packaging and clear labelling streamline inventory handling and make it straightforward to integrate the probe into existing measurement sets or inspection trays. For process documentation, the listed tolerance and material provide the necessary information for inspection plans and quality records. For delivery details, availability or technical consultation on the Metav IndustryLine M323.I36 gauge pin, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 for prompt specialist advice. Technical data Article number: M323.I36 GTIN: 4061905072093 Label: Gauge pin, single, Ø 18.36 mm, length 50 mm Facts Diameter: 18.36 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Measurement range max: 18.36 mm Special features Material: Special steel Workshop execution Delivered in transport case Category: Gauge pins FAQ What measurement tasks is this probe intended for? The gauge pin is intended for end‑measurements, fixture setting and pass/fail checks where a compact, stable reference of 18.36 mm is required. Is the probe supplied as a single item or part of a set? This listing is for a single gauge pin (SKU M323.I36); sets are sold separately where available. How is the probe protected during storage and transport? The inspection pin is supplied in a protective transport case to preserve the measuring surface and ensure consistent handling. Which material and tolerance are specified for the probe? The probe is made from special steel and specified to ±0.002 mm tolerance for reliable repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.37mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high dimensional accuracy (±0.002 mm), special steel construction and compact 50 mm length for reliable end‑measure checks; order directly via Metav Werkzeuge or contact our consultants for specification support. Test pin, single, 18.37 mm — workshop‑grade gauge pin by Metav IndustryLine The Test pin, single, 18.37 mm, length 50 mm is a workshop‑grade gauge pin intended for end‑measure verification and assembly checks in toolrooms and production inspection benches. High precision ±0.002 mm tolerance Special steel construction 50 mm length for compact checks Delivered in protective transport case Precision where reproducibility matters This workshop pin delivers a defined diameter of 18.37 mm with a narrow tolerance of ±0.002 mm, which supports repeatable dimensional control during incoming inspection and in‑process checks. The tight tolerance reduces uncertainty when mounting or checking bore fits, so statistical control of assembly operations benefits from fewer outliers and lower rework rates. By providing a mechanical reference with known limits, the pin helps maintain traceable inspection routines and supports quality documentation in production cycles. Robust construction for everyday inspection Manufactured from special steel and specified as a workshop‑grade item, the probe is built to withstand routine handling in busy shops while maintaining surface integrity where it contacts mating parts. The compact 50 mm length and solid feel ensure stable seating in gauges and fixtures, aiding fast, single‑hand operation at inspection stations. A protective transport case is included to prevent damage during storage and transit, preserving the measuring surface and extending service life for dependable performance across repeated use. Designed for practical metrology workflows The pin suits common metrology tasks such as end‑measure checks, fit verification and quick go/no‑go assessments on production lines and assembly benches. Its compact form makes it ideal for confined fixtures or for use alongside other dimensional standards in a calibrated set. For buyers seeking dependable workshop references, this gauge pin integrates cleanly into existing processes and supports consistent measurement results. Metav’s quality filter in Emmerich ensures product consistency and reliable supply for industrial needs. Choose Metav IndustryLine gauge pins for consistent dimensional control — contact Metav Werkzeuge for advice and local supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.I37 GTIN: 4061905072109 Label: Prüfstift, einzeln, 18,37 mm Länge 50 mm Brand: Metav IndustryLine Facts Diameter: 18.37 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Delivered in protective transport case Single test pin (individual) FAQ What are the exact dimensions and tolerance of the pin? The test pin (SKU M323.I37) has a diameter of 18.37 mm, a length of 50 mm and a tolerance of ±0.002 mm. Which material is used for this gauge pin? This Metav IndustryLine test pin is made from special steel, specified for workshop and inspection use. Is the pin suitable for routine workshop checks? Yes — the workshop‑grade construction and compact length make the pin suitable for regular end‑measure and fit checks in production and toolroom environments. Is a case provided for storage and transport? A protective transport case is included to safeguard the measuring surface during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.38mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Reliable dimensional control with ±0.002 mm tolerance, 18.38 mm diameter and a sturdy 50 mm length in special steel ensures consistent inspection results; order via Metav Werkzeuge or contact our consultants for specification support. Gauge pin M323.I38 — Gauge pin Ø 18.38 mm, 50 mm length (Metav IndustryLine) A gauge pin (M323.I38) for precise dimensional checks and end‑measure verification in workshop inspection and assembly environments Workshop-grade construction Diameter 18.38 mm, tolerance ±0.002 mm 50 mm length in special steel Supplied in protective transport case Precision where it matters for inspection and tooling The gauge pin delivers a clear, measurable standard for repeatable checks: with a diameter of 18.38 mm held to ±0.002 mm, it supports tight acceptance windows during component inspection. Such a narrow tolerance reduces ambiguity in pass/fail decisions and shortens inspection time, which directly improves throughput and minimises costly rework. The dimensional stability of this test pin makes it suitable for end‑measure and contact‑gauge tasks in routine quality control. Robust workshop design that endures handling Manufactured in special steel, the test pin combines resistance to wear with straightforward handling: at 50 mm overall length and approx. 0.15 kg weight it balances rigidity with easy placement in fixtures. The product’s workshop‑grade execution is tailored to frequent use and mechanical stress typical for shop‑floor routines. Delivery in a protective transport case keeps the pin safe during storage and transport and reduces the need for immediate reconditioning after handling. Improves process reliability and decision speed Using a dedicated gauge pin like this one integrates smoothly into measurement stations and manual gauging procedures. The clear specification — 18.38 mm nominal and ±0.002 mm accuracy — helps standardise inspection criteria across shifts and operators. That rational clarity supports faster decisions, fewer disputes over measurements and a lower scrap rate; in short, the tool pays back through improved quality assurance and predictable throughput. Practical handling, storage and compatibility The compact form factor and workshop specification make the pin simple to slot into existing test rigs or to use with handheld comparators. Protected transport packaging ensures the reference surface remains intact until use, preserving the stated tolerance. For traceability and inventory control, the unit is supplied with product identifiers suitable for integration into stock systems and inspection records, supporting consistent documentation of measurement activities. For tailored advice on how the Metav IndustryLine gauge pin M323.I38 can fit into existing inspection processes and to arrange delivery from Metav Werkzeuge, contact our specialists in Emmerich for prompt technical guidance and reliable supply. Technical data SKU: M323.I38 GTIN: 4061905072116 Article: Gauge pin, single, 18.38 mm diameter Measured values Nominal diameter: 18.38 mm Tolerance: ±0.002 mm Length: 50 mm Weight: 0.15 kg Materials & features Material: Special steel Execution: Workshop version Delivery: Protective transport case Eclass: 21170231 FAQ What nominal size and tolerance does this gauge pin provide? The gauge pin M323.I38 (Metav IndustryLine) has a nominal diameter of 18.38 mm and a stated tolerance of ±0.002 mm, suitable for precise go/no‑go and inspection checks. What material is the gauge pin made from? This gauge pin is manufactured from special steel, specified for workshop durability and wear resistance in repeated inspection tasks. Is the gauge pin supplied ready for storage and transport? The M323.I38 is supplied in a protective transport case to preserve the reference surface during handling and storage. What applications suit this gauge pin? The pin is intended for dimensional control, end‑measure verification and fixture checking in workshops, assembly lines and inspection benches. How is the product identified for inventory or traceability? Identification is provided via SKU M323.I38 and GTIN 4061905072116, enabling straightforward recording in stock and inspection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.39mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, robust special-steel construction and a compact 50 mm length for straightforward final-size inspection; order the gauge pin directly via Metav Werkzeuge or consult the sales team for application advice. Gauge pin M323.I39 – single plug gauge, 18.39 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin engineered for precise final-size inspection and go/no-go reference measurements in workshop metrology and toolmaking environments. Precision 18.39 mm diameter, ±0.002 mm tolerance 50 mm length for stable handling and repeatable checks Workshop-grade special steel construction Supplied as single gauge pin, inspection reference Engineered for repeatable dimensional checks The M323.I39 is manufactured to deliver consistent repeatability for bore verification and reference testing. With a nominal diameter of 18.39 mm and a declared tolerance of ±0.002 mm (equivalent to 2 micrometres), the pin provides a measurable boundary for acceptance decisions in quality control routines. The tight tolerance supports reliable pass/fail judgements and reduces uncertainty during serial inspections, making the component suitable for tasks where precision is the decisive criterion. Practical workshop handling and application benefits At 50 mm overall length the plug offers a good balance between reach and rigidity, facilitating comfortable handling during in-process checks and bench inspection tasks. The special steel construction is specified for workshop use and provides mechanical stability for repeated contact with bores and housings. Designed as a single, dedicated reference pin, it functions well as an end-size datum for setting fixtures, checking reamed holes or confirming final bore dimensions in assemblies, helping to streamline routine inspection workflows. Built for quality workflows and dependable supply Delivered with a focus on everyday usability, this workshop version is intended to integrate into formal measurement procedures or quick verification loops on the shop floor. The declared ±0.002 mm accuracy aligns the component with high-precision acceptance criteria, while the modest weight supports easy handling without adding complexity to test rigs. Metav’s role as a European quality filter and distribution hub ensures consistent product availability and traceability, supporting uninterrupted inspection processes in production and maintenance environments. Contact Metav Werkzeuge for specification matching and supply — Metav’s consultants assist with selection, delivery and integration into existing inspection routines. Technical data Article number: M323.I39 GTIN: 4061905072123 SKU: M323.I39 Facts Diameter: 18.39 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single gauge pin for final-size inspection FAQ What tolerance does the gauge pin deliver? The M323.I39 gauge pin is specified with a tolerance of ±0.002 mm, corresponding to a 2 micrometre variation suitable for fine acceptance checks. Which applications suit this plug gauge? This plug gauge is intended for final-size inspection, go/no-go verification and fixture setting in toolmaking, component inspection and workshop metrology. What material is used for the pin? The M323.I39 is constructed from special steel; details on heat treatment or surface finish are not specified in the basic product data. Is the 50 mm length advantageous for workshop use? Yes, the 50 mm length offers stable handling and adequate engagement in common bore depths, balancing rigidity with usability for routine checks. Can the pin be used as a reference in assembly fixtures? The plug is designed to serve as a reference datum for final-size checks and setting tasks, supporting repeatable alignment in fixtures and measurement setups. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.3mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Metav IndustryLine precision meets practical workshop utility: the combination of an exact 18.30 mm nominal diameter, a robust 50 mm length and a tight ±0.002 mm tolerance ensures reproducible reference measurements and reliable fit checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I30 — 18.30 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I30 is a single inspection pin designed for end‑measure verification and reference-fit checks, supplied as a workshop‑grade instrument for routine quality control Precision 18.30 mm diameter 50 mm overall length Special-steel construction Tolerance ±0.002 mm Accurate reference for repeatable checks A compact reference element, the M323.I30 provides a consistent datum for mating components thanks to its nominal 18.30 mm diameter and laboratory-grade tolerance of ±0.002 mm. In practical terms, this level of accuracy reduces setup time and rejects during batch checks by maintaining tight fit criteria; the result is fewer downstream adjustments and more predictable assembly outcomes. The specification is expressed in standard metrology terms so measurements integrate seamlessly into existing inspection routines and reports. Built for everyday workshop handling Constructed from special steel, the pin combines surface resilience with geometric stability across its 50 mm effective length. The workshop execution addresses common handling and storage conditions encountered on the shop floor, providing a robust tool for frequent use. Nominal mass is modest, allowing straightforward manual positioning while preserving the stiffness needed for reliable contact measurements. Where interchangeability and mechanical wear are concerns, the material choice balances durability with machinability for maintenance or replacement. Practical integration into quality workflows This single inspection pin acts as a simple but effective tool for end‑measurement, gauge setting and go/no‑go checks. Its plain geometry makes it compatible with bore gauges, alignment fixtures and comparator setups, while the stated tolerance supports traceable decision limits in process control. For documentation and procurement, the item is offered under the stock reference M323.I30 and can be included in routine inventory lists and inspection plans as a repeatable reference element. For repeatable reference measurements, contact Metav Werkzeuge to request the M323.I30 gauge pin and discuss availability from our Emmerich quality hub. Technical Data SKU: M323.I30 GTIN: 4061905070907 Material: Special steel Weight: 0.15 kg Core data Diameter: 18.30 mm Length: 50 mm Tolerance: ±0.002 mm Special features Workshop execution Single inspection pin Category: Gauge pins Intended use: End‑measure and reference checks FAQ What tolerance can be expected from this gauge pin? The M323.I30 gauge pin (Metav IndustryLine, SKU M323.I30) is specified with a tolerance of ±0.002 mm, providing a high level of dimensional reproducibility for reference measurements. Which material is used for the pin and what are the benefits? The pin is made from special steel, chosen for a balance of surface durability and dimensional stability suitable for regular workshop use. Is the M323.I30 suitable for setting bore gauges and fixtures? Yes, the single inspection pin is intended for end‑measure verification and is compatible with bore gauge setting, fixture alignment and comparator checks. Can this pin serve as a reference for fit checks in production? The nominal 18.30 mm diameter and tight tolerance make the M323.I30 appropriate as a repeatable reference for fit and go/no‑go assessments within production control plans. How is the product referenced for ordering and documentation? The item is listed under SKU M323.I30 and GTIN 4061905070907 for procurement and traceability in inspection documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.41mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a workshop‑grade test pin that combines tight tolerance (±0.002 mm), a precise Ø 18.41 mm diameter and robust special‑steel construction for reliable end‑measurements; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.I41, single – Ø 18.41 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.I41 engineered for precise end‑measurement and assembly verification in workshop inspection and jig construction. Workshop‑grade construction Diameter Ø 18.41 mm for end measurements Tolerance ±0.002 mm for tight fits Delivered in a protective transport case Repeatable precision for tight fits The M323.I41 serves as a dedicated inspection pin where repeatability matters. With a declared tolerance of ±0.002 mm, this single test pin is suitable for dimensional checks and go/no‑go verifications that demand narrow clearance interpretation. The declared accuracy supports consistent measurement outcomes when used as a reference in assembly checks or when verifying bore finishing, reducing uncertainty in pass/fail decisions. Robust build that suits workshop handling Manufactured in special steel and labelled as a workshop execution, the pin balances wear resistance with handling practicality. The 50 mm overall length and compact mass make it straightforward to position by hand or in simple fixtures while the solid shaft geometry minimises flex under light probing. Delivery includes a protective transport case, ensuring the pin remains undamaged between jobs and preserving the calibrated surface from accidental knocks during storage or transit. Practical integration into inspection routines The single‑piece design and clear dimensional specification (Ø 18.41 mm, 50 mm length) simplify documentation and tool lists for quality control. The compact footprint of the pin makes it easy to store with tooling sets or include in first article inspection kits for repeatable checks. Where traceable identification is required, the product is supplied with a unique SKU and GTIN for inventory control and procurement workflows. A precision partner you can rely on Metav IndustryLine positions this test pin within a broader supply chain philosophy that focuses on accessibility and dependable stock management from Emmerich. The offering is aimed at workshops and production facilities that need reliable tools without complex procurement procedures: proven product consistency, broad catalogue depth and a local logistics hub combine to shorten lead times and lower sourcing risk. Contact Metav Werkzeuge for ordering the Metav IndustryLine gauge pin M323.I41 or for tailored technical advice and delivery options – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: M323.I41 GTIN: 4061905072727 Category: Messstifte Facts Diameter: 18.41 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Model type: Workshop execution Delivery: Protective transport case (plastic/wood) Packaging: Single test pin FAQ What is the declared tolerance of this test pin? The M323.I41 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.002 mm. Which material is used for the pin? The test pin is manufactured from special steel as listed in the product data. Is a protective case included with the pin? Yes, the product listing indicates delivery in a protective transport case (plastic or wooden), suitable for transport. For which applications is this gauge pin intended? This inspection pin is intended for end‑measurements, assembly verification and reference checks in workshop and fixture environments. How can the item be identified for procurement and inventory? The gauge pin is listed under SKU M323.I41 and GTIN 4061905072727 for procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.42mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine workshop-grade robustness with ±0.002 mm repeatability and a compact 18.42 mm diameter for dependable end‑measure checks; the compact form factor and 50 mm length ensure easy handling and stable seating during inspection. Order the gauge pin directly via Metav Werkzeuge or consult the technical advisers if additional information is required. Gauge pin, single — 18.42 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single, 18.42 mm, 50 mm length is a workshop‑grade cylindrical reference designed for quick end‑measure verification and assembly checks in production and inspection environments. Workshop-grade construction Diameter 18.42 mm precision Length 50 mm special steel Tolerance ±0.002 mm Consistent, measurable reference for end‑of‑line checks This cylindrical reference provides a repeatable datum for end‑measure and fit verification, reducing uncertainty in fast inspection loops. The combination of a narrow tolerance of ±0.002 mm and the compact geometry makes this pin suitable where high dimensional fidelity is required in short runs or sample checks. The hardened surface and stable mass help to maintain position during seating, which supports reproducible results across repeated measurements. Robust material and handling benefits for busy workshops Manufactured from special steel, the pin resists surface deformation and wear under regular contact use, lengthening service life in daily shop environments. The 50 mm length is long enough to provide confident seating and grip while remaining compact for handheld positioning or fixture use. The controlled surface finish yields predictable contact behaviour with micrometre heads and gauge blocks, aiding reliable comparative measurements without complex fixturing. Integration into inspection routines and traceability As a straightforward dimensional reference, this gauge pin fits naturally into incoming inspection, in‑process checks and final acceptance tests. Marking and traceable identifiers simplify catalogue handling and audit trails when used alongside workshop documentation. The compact design supports quick interchange in modular fixtures or portable inspection sets, helping to keep throughput high while maintaining a clear measure of conformity. For tailored advice on using this Metav IndustryLine gauge pin in production or quality control, contact Metav Werkzeuge’s technical team for practical guidance and procurement support. Technical Data Article number: M323.I42 GTIN: 4061905072734 Weight: 0.15 kg Material: Special steel Diameter: 18.42 mm Length: 50 mm Tolerance: ±0.002 mm Label: Gauge pin, single, 18.42 mm length 50 mm Facts Precision class: ±0.002 mm Net weight: 0.15 kg Special features Workshop version Single gauge pin format Compact cylindrical reference FAQ What is the intended use for this gauge pin? The gauge pin is intended as a compact reference for end‑measure and fit checks in workshop inspection and production control; the Metav IndustryLine pin with SKU M323.I42 supports quick dimensional verification. Is the material suitable for repeated contact with micrometre anvils? Yes, the special steel construction is chosen to withstand regular contact and to maintain surface integrity during repeated seating and comparative measurements. Can this pin be used in fixtures and portable inspection sets? Its 50 mm length and compact form factor make it suitable for modular fixtures and portable sets where a stable, short reference element is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.43mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from repeatable measurement accuracy and workshop-grade durability: a 18.43 mm diameter test element with 50 mm usable length and a tight ±0.002 mm tolerance, designed for end-dimension verification. Order the gauge pin directly via Metav Werkzeuge or consult our advisers for application support and availability. Gauge pin M323.I43 — single test pin, Ø 18.43 mm, length 50 mm (Metav IndustryLine) The Gauge pin M323.I43 is a single test pin engineered for fast, repeatable verification of end dimensions in workshop and production environments. Workshop version for industrial use Diameter 18.43 mm, length 50 mm Manufactured from special steel Calibration tolerance ±0.002 mm Precise measurements that reduce rework and inspection time This gauge pin delivers a compact, repeatable measurement solution where tight end dimensions matter. Manufactured for a nominal diameter of 18.43 mm with a length of 50 mm, the component is machined to a controlled form that keeps roundness and taper within a ±0.002 mm deviation. Such consistency lowers the number of marginal parts that require rework and shortens inspection cycles, translating into measurable efficiency gains on the shop floor. The description focuses on outcomes so that inspection routines become faster and more predictable. Robust design for everyday workshop handling Built as a workshop-grade test element, the pin combines a hard-wearing special steel alloy with a geometry optimised for reliable seating in gauges and fixtures. The single-piece configuration simplifies handling during insertion and removal, while the robust finish resists incidental wear that would otherwise affect repeatability. This durability supports frequent use in production-control stations, where mechanical resilience complements dimensional precision to maintain throughput and reduce calibration frequency. Traceability and straightforward integration into quality processes The pin is supplied with an identifiable SKU and GTIN for seamless inventory and traceability management; it fits existing plug-gauge housings and inspection jigs without modification, which minimises setup time. For quality documentation, product identifiers can be logged directly into inspection records to support batch traceability and audits. Choosing a standardised, properly specified test pin helps to stabilise acceptance criteria across shifts and suppliers, enhancing overall process reliability. Why Metav IndustryLine is a practical choice for workshops Metav IndustryLine pairs the component with a practical purchasing and logistics backbone: central European distribution, broad product availability and advice tailored to workshop needs. The emphasis on accessible precision reflects a commitment to equipping workshops and small production sites with tools that are both reliable and easy to adopt. This pragmatic approach reduces procurement complexity and supports continuous production with consistent measuring tools. Secure supply and technical advice from Metav Werkzeuge for the Metav IndustryLine gauge pin M323.I43 — contact our team for delivery options and application guidance Technical data Article number: M323.I43 GTIN: 4061905072741 Manufacturer: Metav IndustryLine Key measurements Diameter: 18.43 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg ECLASS: 21170231 Special features Material: special steel Workshop execution Single test pin Category: gauge pins Story trigger: end dimensions FAQ What applications is this gauge pin intended for? The Metav IndustryLine gauge pin M323.I43 is designed for end-dimension verification in workshop and production inspection tasks, suitable for plug-gauge seating and dimensional checks. Is the diameter and tolerance suitable for precision assembly checks? Yes — the nominal 18.43 mm diameter and ±0.002 mm tolerance make the gauge pin appropriate for precise assembly control and final-dimension verification. Which material is used and why is it beneficial? The pin is made from special steel, offering a durable surface and dimensional stability under routine handling typical in workshop environments. How is the product identified for inventory and traceability? Identification is possible via the SKU M323.I43 and GTIN 4061905072741, facilitating stock management and quality-record linkage for the gauge pin. Can this pin be used directly in existing gauges or fixtures? The single-pin format and standardised diameter/length allow straightforward integration into common plug-gauge housings and inspection jigs without modification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.44mm Gauge Pin, 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a robust workshop design, tight ±0.002 mm tolerance and a compact 18.44 mm diameter for precise end‑dimension checks; order the inspection pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.I44 — inspection pin, 18.44 mm diameter and 50 mm length (workshop version) The Test pin M323.I44 is a workshop‑grade inspection pin for fast verification of end dimensions and fixture alignment in production and maintenance environments. Workshop-grade construction High repeatability ±0.002 mm Diameter 18.44 mm precision fit Supplied in protective case Consistent accuracy that stabilises inspection processes The compact gauge pin offers a measured tolerance of ±0.002 mm, which translates into reliably repeatable checks when assessing end dimensions and locating features. Such a narrow tolerance reduces uncertainty in go/no‑go decisions and supports tighter process control in serial inspection tasks. The pin’s 18.44 mm diameter is suited to precise seating and reference points, enabling quick verification of bores, shafts and fixture positions without complex set‑ups. By converting tight dimensional data into actionable outcomes, the component contributes directly to reduced rework and shorter inspection cycles. Built to withstand workshop use and maintain shape Manufactured from special steel, the probe is engineered for the mechanical demands of daily workshop handling. The 50 mm length and the workshop version specification ensure sufficient engagement depth while keeping rigidity high for repeatable seating. Delivered in a protective case for transport, the single‑piece design resists accidental deformation and maintains surface integrity over repeated use. The small mass and compact form factor make the pin straightforward to integrate into gauge plates or test fixtures, while the material choice provides wear resistance that preserves dimensional stability over time. Practical compatibility and traceable delivery for process integration As a single test pin, the item is intended for dedicated measurement tasks where a precise reference is required. The robust geometry simplifies mounting in modular inspection setups and fixture blocks, and the documented tolerance supports formal inspection records. The product is classified within the Messstifte range and is supplied ready for use, easing procurement and stocking. Metav’s quality approach and European distribution backbone mean straightforward availability and professional advice for adaptation into existing metrology routines. For application support, tailored recommendations or to secure stock of the workshop‑grade M323.I44, contact Metav Werkzeuge in Emmerich for direct assistance and prompt supply. Technical data SKU: M323.I44 GTIN: 4061905072758 Article: Test pin, single, 18.44 mm diameter, 50 mm length ECLASS: 21170231 Dimensions & weights Diameter: 18.44 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Materials & features Material: special steel Workshop version Supplied in protective case Category: Messstifte FAQ Is the pin suitable for calibration reference tasks? The test pin is manufactured to a tight tolerance of ±0.002 mm, making it suitable as a workshop reference; formal calibration status should be requested if a certificate is required for laboratory use. Can the pin be used in fixture alignment and gauge blocks? Yes, the geometry and surface finish of this inspection pin support precise seating in fixture bores and gauge plates for alignment and verification tasks. What material is the pin made from and how does that affect wear? Made from special steel, the pin balances hardness and toughness to resist wear in routine inspection operations while preserving dimensional stability. Is the item delivered ready for use or does it require additional processing? The test pin is supplied as a single, finished component in a protective case and is ready for immediate integration into inspection routines. Which product identifiers should be used when ordering? Order using SKU M323.I44 or the GTIN 4061905072758 to ensure accurate supply of the specified diameter and length. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.45mm Gauge Pin 50mm Length Workshop Version Plastic Case - Metav IndustryLine
Benefit from exact end-dimension control with the 18.45 mm nominal diameter and a close ±0.002 mm tolerance, combined with a robust special steel construction and a 50 mm usable length for reliable insertion depth. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.I45 gauge pin — single test pin, 18.45 mm diameter, 50 mm length (Metav IndustryLine) A M323.I45 gauge pin designed for precise end-dimension verification and fixture testing in inspection and assembly environments. 18.45 mm diameter for precise fits 50 mm usable length for deeper sockets Tolerance ±0.002 mm for high accuracy Special steel for long-term wear resistance Guarantee interchangeability through exact diameters A hardened gauge pin with a nominal 18.45 mm diameter offers consistent contact geometry for go/no‑go checks, alignment aids and plug-gauge fixtures. The declared ±0.002 mm runout tolerance reduces uncertainty in pass/fail decisions and supports faster throughput in inspection loops. Using a defined test pin diameter simplifies traceability in production control and shortens setup times for repeat runs. Minimise downtime with durable, serviceable construction Constructed from special steel, the test pin resists surface wear and maintains dimensional integrity under frequent engagement. The 50 mm length ensures adequate engagement depth in many insertion scenarios while keeping handling and storage practical. This combination of durability and a compact form factor supports longer inspection intervals and fewer tool replacements, contributing to lower total operating effort. Integrate easily into existing metrology workflows The single-piece design suits individual replacement or bespoke gauge assemblies and integrates cleanly with existing plug‑gauge blocks and fixture plates. Supplied as an individual unit and packaged for transport, the pin is ready for immediate use in inspection benches or fixture build-outs. Consistent material choice and tight tolerance deliver measurable improvements in repeatability across serial inspections. Choose Metav IndustryLine precision—contact Metav Werkzeuge for specification guidance and procurement support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.I45 GTIN: 4061905072765 Label: Prüfstift, einzeln, 18,45 mm Länge 50 mm Core dimensions Diameter: 18.45 mm Length: 50 mm Weight: 0.15 kg Materials & special features Material: special steel Tolerance: ±0.002 mm Delivery: individual pin, packaged in a transport case Version: workshop execution FAQ What nominal diameter does the pin have? The pin has a nominal diameter of 18.45 mm and is designed for precise end-dimension verification using the Metav IndustryLine M323.I45 single gauge pin. What tolerance can be expected from this test pin? This test pin is specified with a tolerance of ±0.002 mm, providing a high degree of measurement certainty for go/no‑go and comparative checks. Which material is used for the pin and what does that mean for wear? The pin is made from special steel, chosen to resist surface wear and maintain dimensional stability under repeated use in inspection applications. Is the pin supplied individually or as part of a set? The product is supplied as an individual gauge pin (single unit), suitable for replacement purposes or integration into custom gauges. How is the pin packaged for transport? The gauge pin is delivered in a transport case to protect the component during shipment and handling Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.46mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Reliable workshop performance meets fine traceability: the compact design and dimensional tolerance ±0.002 mm ensure consistent end‑measure checks across production runs. Combine robust construction, exact fit and straightforward procurement via Metav Werkzeuge for dependable gauging; order the gauge pin directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.I46 – single test pin, Ø 18.46 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.I46 is a compact test pin intended for end‑measure verification and inspection tasks in workshop and production environments, offering a dedicated solution where repeatable small‑scale gauging is required. Workshop-grade construction Diameter 18.46 mm for end‑measure checks Length 50 mm hardened special steel Dimensional tolerance ±0.002 mm Repeatable results through defined tolerance and fit The pin's dimensional tolerance of ±0.002 mm provides a clear technical basis for repeatable measurements and pass/fail decisions on small features. In practical terms, this level of accuracy reduces ambiguity when verifying end dimensions or checking fits during incoming‑goods inspection, so production control data remain consistent. The specification is suitable for routine gauging where narrow tolerance windows are enforced and where measurement uncertainty must be minimised to maintain product conformity. Robust, workshop‑grade design for everyday handling Built as a workshop‑execution test pin from special steel, the component resists the handling and contact stresses typical of daily inspection routines. The compact mass and balanced geometry support secure placement and stable seating in fixtures or test rigs, while the manageable weight assists quick handling on the shop floor. These attributes translate into fewer setup adjustments and a lower rate of incidental surface damage during repetitive checks, which helps preserve measurement integrity over time. Compact dimensions that suit confined checks The combination of a 50 mm length and a 18.46 mm diameter makes this pin particularly useful for confined spaces, short bore inspections and end‑measure applications where longer gauges would be impractical. Its dimensions allow it to serve as a reference mandrel for small assemblies and to be used in pneumatic or manual test fixtures where accessibility is limited. This compact form factor supports efficient gauging cycles without compromising on the contact area needed for stable measurement. Clear identification and workflow integration Marked and catalogued for procurement workflows, the test pin is supplied as a single unit and is easily referenced in bills of material and inspection plans. The inclusion of an article identifier and GTIN supports traceable ordering and inventory control, while sourcing from Metav IndustryLine benefits from the company's European quality‑filter approach and broad product availability. This alignment between specification, identification and supply chain reduces lead times and simplifies repeat orders for production and maintenance schedules. Request technical sheets or a tailored supply proposal from Metav Werkzeuge for the Metav IndustryLine gauge pin M323.I46; contact info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and assured delivery from Emmerich. Technical data Article number: M323.I46 SKU: M323.I46 GTIN: 4061905072772 Manufacturer: Metav IndustryLine Facts Diameter: 18.46 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Single gauge pin for end‑measures Material: Special steel Category: Gauge pins FAQ What is the intended use for this test pin? The gauge pin M323.I46 is intended for end‑measure checks and small‑bore verification in workshop and production inspection tasks. How precise is the dimensioning of the pin? The pin is manufactured to a tolerance of ±0.002 mm, providing tight repeatability suited to routine gauging and quality control. Which material is used for the pin? The test pin is made from special steel, selected for workshop durability and stable contact performance. Can the pin be ordered individually for replacement stocks? Yes, the item is supplied as a single unit under SKU M323.I46 and can be re‑ordered via Metav IndustryLine channels. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.47mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine ±0.002 mm dimensional accuracy with robust special steel construction and a workshop-ready protective case for dependable reference gauging in production. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. M323.I47 gauge pin — single test pin, Ø 18.47 mm, 50 mm length (Metav IndustryLine) A M323.I47 gauge pin designed for precise reference measurements and fit verification in workshop and inspection environments. *Workshop-grade finish for daily industrial use *Diameter 18.47 mm with ±0.002 mm accuracy *Delivered in protective transport case Consistent high-precision for in-process checks The cylindrical reference element offers ±0.002 mm positional accuracy, making it suitable for fine tolerance checks during assembly and inspection. Manufactured from special steel, the pin resists wear and maintains geometric integrity over repeated contact cycles, which reduces the need for frequent replacement and supports consistent production throughput. The compact 50 mm length and moderate mass contribute to stable handling when placed into fixtures or bore gauges, helping to keep process variation low. Designed to simplify fit and mating assessments With a diameter of 18.47 mm, the pin serves as a reliable master for go/no-go checks, pin gauging and alignment tasks. Its smooth, ground finish minimises surface friction and provides a true running surface for assessing bore form and clearance. The workshop execution combines practical robustness with dimensional fidelity, allowing quick verification of mating parts and tool set-ups without complex measuring equipment—ideal where rapid, repeatable assessments increase operational efficiency. Practical handling, storage and traceability Delivered as a single unit in a protective case for transport, the pin is ready for storage and safe transfer between measuring stations. The compact packaging preserves the calibrated condition of the element and reduces risk of nicks or contamination. At 0.15 kg gross weight and 50 mm length, the instrument integrates easily into inspection trays and modular tooling. Supplied as a standalone reference pin, it supports straightforward integration into existing quality routines and traceable part handling. Contact Metav Werkzeuge today to specify the M323.I47 gauge pin for production or inspection use and request tailored advice from our metrology specialists Technical data SKU: M323.I47 GTIN: 4061905072789 Weight: 0.15 kg Length: 50 mm Diameter: 18.47 mm Material: Special steel Accuracy: ±0.002 mm Workshop execution Delivered in transport case Core measurements Diameter: 18.47 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Single test pin Ground, wear-resistant surface Protective transport case included Category: Gauge pins FAQ What inspection tasks is this gauge pin suitable for? The M323.I47 gauge pin from Metav IndustryLine is intended for fit checks, bore verification and reference measurement tasks where a 18.47 mm master and ±0.002 mm accuracy are required. Is the pin protected for transport and storage? Yes, the gauge pin is supplied in a protective transport case to keep the ground surface free from damage and contamination during handling. Which material is used for the test pin? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.48mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop‑ready gauge pin that combines a defined diameter of 18.48 mm, a working length of 50 mm and a high manufacturing tolerance of ±0.002 mm to secure reproducible end‑measure checks; order via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I48 — single test pin, Ø 18.48 mm, length 50 mm (Metav IndustryLine) A gauge pin M323.I48 engineered for precise end‑measure inspection and plug‑gauge tasks in workshop and production metrology. Workshop version for routine inspection Diameter 18.48 mm, length 50 mm Tolerance ±0.002 mm for fine checks Made from special steel for long service Reliable inspection that fits everyday workshop routines This single test pin provides a compact reference for go/no‑go checks and dimensional verification in assembly, fixture set‑up and quality control. With a nominal diameter of 18.48 mm and a grip length of 50 mm, the component delivers a well‑balanced contact area that reduces flex and stabilises readings during manual handling. The declared ±0.002 mm tolerance corresponds to approximately 2 micrometres, ensuring precision that is suitable for fine mechanical parts and tight assembly tolerances without the complexity of a full gauging system. Use of a defined test pin avoids cumulative measurement errors and simplifies routine acceptance sampling. Built to withstand workshop use while maintaining reference geometry Constructed from special steel, the pin is intended as a resilient reference element for repeated checks. The workshop version designation indicates a focus on robust finishing and consistent geometry under normal shopfloor conditions, which reduces the need for frequent replacement. The relatively low mass (0.15 kg) and compact profile aid in safe handling and rapid exchange in pin blocks or fixtures. Where surface wear is a concern, the choice of steel provides dimensional stability over many cycles, preserving the gauge integrity required for traceable inspection processes. Streamlined handling and traceability for quality workflows As a single‑piece test pin, the M323.I48 integrates easily into manual and semi‑automated inspection routines, serving as a handheld reference, a mating plug for sockets, or a master for bench verification. Marking with SKU M323.I48 and GTIN supports inventory control and clear traceability in production documentation. The simple geometry reduces manipulation time during checks, which improves throughput and lowers the risk of measurement variation caused by handling. For customers seeking reproducible short‑range checks and minimal setup time, this gauge pin is an efficient choice. Contact Metav Werkzeuge for tailored advice and to order the Metav IndustryLine gauge pin M323.I48 for reliable end‑measure inspection; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.I48 GTIN: 4061905072796 Brand: Metav IndustryLine Facts Diameter: 18.48 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Single gauge pin design Workshop version (Werkstatt‑Ausführung) Category: Gauge pins (Messstifte) FAQ What is the intended use of this gauge pin? The gauge pin M323.I48 is intended for end‑measure checks, plug‑gauge verification and quick dimensional checks in workshop and production metrology. What are the exact dimensions and identifiers? Diameter 18.48 mm, length 50 mm, tolerance ±0.002 mm; SKU M323.I48, GTIN 4061905072796. How precise is a tolerance of ±0.002 mm in practical terms? A tolerance of ±0.002 mm equals roughly 2 micrometres, which is appropriate for high‑precision inspection tasks where small deviations must be detected reliably. What material is used and what does that mean for durability? The pin is manufactured from special steel, selected to provide wear resistance and dimensional stability under typical workshop use. Is this model suitable for routine workshop inspection? Yes — the Werkstatt‑Ausführung (workshop version) of this gauge pin is designed for everyday measurement tasks and frequent handling. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.49mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability (±0.002 mm), 18.49 mm diameter and a robust special steel construction to standardise inspection and fixture checks in the workshop. Order or request application advice directly via Metav Werkzeuge for fast availability and technical guidance. Inspection pin M323.I49 — gauge pin with 18.49 mm diameter and 50 mm length (Metav IndustryLine) The inspection pin M323.I49 is a single gauge pin designed for precise end‑measurement, fixture testing and go/no‑go checks in workshop and inspection environments. High-precision tolerance ±0.002 mm Diameter 18.49 mm, length 50 mm Hardened special steel construction Workshop-grade execution Precision that reduces rework and speeds inspection A compact, single-piece gauge pin delivers a measurable advantage in routine quality checks. With a verified tolerance of ±0.002 mm, the pin provides a quantifiable basis for acceptance testing and minimises ambiguous fit results that lead to rework. The given 18.49 mm nominal diameter and 50 mm length are matched to common end‑measurement tasks, enabling straightforward interchange with fixture seats and inspection jigs. In practice, the tight tolerance shortens decision cycles during incoming inspection and assembly verification, contributing directly to throughput improvements on the shop floor. Durable construction for repeatable measurements Made from special steel, the pin resists wear and preserves critical diameters over many cycles, which supports long‑term repeatability of measurements. A stable material and workshop execution reduce the risk of surface damage when the pin is used in alignment, location or gauging operations. The modest mass and balanced geometry help maintain alignment in fixture checks, so measurements remain consistent even under frequent handling. Where process stability and traceable measurement steps are required, this specification supports reliable comparative checks across shifts and operators. Practical handling and calibration context The M323.I49 format suits direct insertion into bores, alignment sleeves and reference fixtures; its single‑piece design keeps handling simple and reduces setup time versus multi‑component gauges. The pin’s specification is expressed in clear numerical terms (18.49 mm, 50 mm, ±0.002 mm) so incorporation into inspection plans and control charts is immediate. If formal calibration is required, the dimensional values given here provide an explicit reference for in‑house or laboratory calibration records and for procurement specifications in quality documentation. Confidence through responsible sourcing From a procurement perspective, relying on a recognised line reduces supply risk and supports consistent quality control routines. Metav IndustryLine items are selected to suit industrial metrology needs and to make accurate inspection tools accessible to workshops and specialist suppliers alike. The choice of a workshop‑grade inspection pin helps maintain inspection standards without unnecessary complexity, aligning well with a pragmatic quality management approach. Contact Metav Werkzeuge for application advice and availability of the Metav IndustryLine inspection pin — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M323.I49 GTIN: 4061905449352 Brand: Metav IndustryLine Core specifications Diameter: 18.49 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Execution: workshop-grade Category: gauge pin / inspection pin Application: end-measurement and fixture checks FAQ What accuracy can be expected from this gauge pin? The inspection pin delivers a tolerance of ±0.002 mm, which makes it suitable for fine dimensional checks and repeatable fixture verification. Is the pin suitable for use in alignment and locating applications? Yes, the single‑piece gauge pin is designed for insertion into bores and sleeves for alignment, locating and go/no‑go gauging tasks. What material is used for the pin and how does that affect wear? The pin is made from special steel, chosen to provide good surface hardness and wear resistance for frequent workshop use. Can this pin be included in formal inspection records? The dimensional data (18.49 mm / 50 mm / ±0.002 mm) enables straightforward inclusion in inspection plans and calibration records for traceability. Is the Metav IndustryLine inspection pin compatible with standard fixture sizes? The nominal diameter and length are matched to common fixture and sleeve dimensions; refer to the recorded values for final compatibility checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.4mm Gauge Pin Length 50mm, Workshop Version, Special Steel, ±0.002 Accuracy, Supplied In Case - Metav IndustryLine
Take advantage of precision tolerance, robust workshop design and convenient transport protection to ensure fast, repeatable inspection and fitting checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I40 — single test pin, Ø 18.4 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.I40 is a precision ground test pin designed for end‑measure verification and fit inspection in workshop and production environments, offering a compact length for reliable handling during assembly and quality control tasks. Workshop execution for robust daily use Precision tolerance ±0.002 mm Diameter Ø 18.40 mm, length 50 mm Supplied in protective transport case Repeatable accuracy for critical fits The pin delivers a tolerance of ±0.002 mm, which supports repeatable verification of bores and mating parts where small deviations affect assembly performance. Manufactured from special steel and ground to size, the component provides dimensional stability that reduces uncertainty in pass/fail checks. This level of precision is particularly relevant for end‑measure checks and fits where a fine clearance or interference must be confirmed reliably. Designed for daily workshop handling A workshop execution implies resilience under frequent use and straightforward handling on the shop floor. With a compact 50 mm length and a clear Ø 18.4 mm diameter, the test pin is easy to position in bore checks and jig inspections without excessive overhang. The supplied protective transport case preserves surface integrity during storage and transit, maintaining the pin’s measuring quality over time and lowering the risk of accidental damage. Practical integration into inspection routines As a single ground test pin, the product is suitable for rapid pass/fail checks, gauging tasks and occasional spot inspections as part of standard quality routines. The simple geometry supports quick comparisons against reference gauges and can be incorporated into fixture checks where a defined end measure is required. Using such a precisely made pin streamlines inspection throughput while maintaining measurable confidence in assembly tolerances. Traceability and identification for procurement Clear identification is provided for inventory and traceability purposes: the item is listed under M323.I40 and carries GTIN 4061905072710. The modest mass facilitates handling on the shop floor without adding significant weight to kits or tool drawers. The combination of specified tolerance, material and workshop design supports consistent results in serial inspection tasks and reduces the need for repeated rework. Contact Metav Werkzeuge for a specification sheet or to request a tailored offer — Metav Werkzeuge provides regional stocking and technical guidance from Emmerich for reliable delivery and application support Technical data Article number: M323.I40 GTIN: 4061905072710 Brand: Metav IndustryLine Material: Special steel Type: Single gauge pin Facts Diameter: 18.4 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop execution Precision ground surface Supplied in protective transport case Compact geometry for fixture and bore checks FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.I40 is manufactured to a tolerance of ±0.002 mm, suitable for fine inspection and fit verification in workshop environments. Is the pin supplied ready for transport and storage? Yes, the test pin is supplied in a protective transport case, which preserves the ground surface and prevents handling damage during storage or shipment. What material is used for the pin? The pin is made from special steel, selected for dimensional stability and wear resistance in routine inspection tasks. Which applications is this pin best suited to? The single gauge pin from Metav IndustryLine is intended for end‑measure checks, bore gauging and quick fit inspections where a compact, precise reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.5 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of a robust measurement reference that combines special steel construction, ±0.002 mm accuracy, and compact handling for reliable end-size inspection — ordered directly via Metav Werkzeuge or discussed with our consultants for speedy integration into workshop processes. Gauge pin, single — 18.5 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin is a single precision test pin designed for end‑size checks, fixture set‑up and quick pass/fail verifications in workshop and inspection environments. Precision ±0.002 mm tolerance Special steel for wear resistance 50 mm overall length, 18.5 mm diameter Workshop version delivered in protective case High precision that reduces rework and speeds checks The core advantage of this precision test pin is its tight tolerance of ±0.002 mm, which provides a dependable reference for end‑size inspection and fixture alignment. Tolerance here refers to the maximum deviation expected during production; a low value means less uncertainty when verifying component fit. In practice, using a high‑accuracy pin for go/no‑go checks shortens decision cycles on the shop floor and reduces scrap rates, since measurements are directly comparable and repeatable. The measurable benefit is a more consistent production flow and fewer interruptions for corrective machining. Durable construction for frequent workshop use Made from special steel, the test pin is formulated to withstand repeated insertion and contact without rapid wear, keeping reference dimensions stable over time. The workshop version specification indicates a design intended for everyday handling rather than delicate laboratory conditions: surfaces are finished for low friction, edges are chamfered for easy entry and the component is ruggedised against knocks. Delivered in a protective case, the pin arrives ready for storage and transport, reducing the risk of damage during shift changes or mobile inspection rounds and extending service life. Compact dimensions for versatile fixture and gauge use With an 18.5 mm diameter and 50 mm length, the pin combines a compact profile with enough engagement length for reliable seating in jigs, bushings or bore gauges. The short overall length improves stiffness during insertion, which lowers measurement variance caused by bending or misalignment. Its modest weight and size make it convenient to handle as part of a gauge set or to include in a portable inspection kit, enabling fast checks on assembly lines, test benches or in-situ inspections without complex fixturing. Practical applications and operational benefits This gauge pin is suitable for end‑size measurement, quick functional testing of mating parts and setting reference distances in fixture construction. Marking the pin as a fixed‑dimension reference helps standardise inspection routines, which supports traceable quality control processes and shorter cycle times in production. Where repeatability matters, the combination of special steel and tight tolerance makes the pin a cost‑effective way to raise measurement confidence and lower downstream rework rates. Contact Metav Werkzeuge for expert advice on integrating this Metav IndustryLine gauge pin into production or to request tailored recommendations from our Emmerich team Technical data Article number: M323.I50 GTIN: 4061905449369 Manufacturer: Metav IndustryLine Material: Special steel Length: 50 mm Diameter: 18.5 mm Facts Length (overall): 50 mm Diameter: 18.5 mm Weight: 0.15 kg Tolerance: ±0.002 mm Eclass: 21170231 Special features Workshop version Delivered in protective case Precision grade for end‑size inspection Category: Gauge pin FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, ensuring tight dimensional control appropriate for precision end‑size checks. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for its wear resistance and dimensional stability under frequent contact, which preserves the reference dimension over many inspection cycles. Is this pin suitable for use in fixtures and jigs? Yes, the gauge pin is intended for fixture set‑up and jigs; its 50 mm length and 18.5 mm diameter provide a stiff, reliable reference for mating parts. How is the product delivered and protected in transit? The workshop version is supplied in a protective case to prevent surface damage during storage and transport, ensuring the reference dimension remains intact. Can this pin be used for rapid pass/fail checks on the shop floor? Yes, the combination of compact dimensions and ±0.002 mm accuracy makes the pin well suited for quick functional checks and go/no‑go verifications. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.51mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
The compact combination of ±0.002 mm repeatability, Ø 18.51 mm diameter and a 50 mm length makes this single gauge pin a reliable choice for precise end‑measure checks and fit verification; order the item directly from Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 18.51 mm — 50 mm length (Metav IndustryLine) The gauge pin, single, Ø 18.51 mm is a workshop‑grade datum pin designed for repeatable end‑measure inspections and assembly checks in production and maintenance environments. Workshop-grade gauge pin Diameter Ø 18.51 mm, length 50 mm High repeatability: tolerance ±0.002 mm Supplied in transport case Repeatable inspection results through tight mechanical tolerance A tolerance of ±0.002 mm ensures consistently repeatable readings when used as a datum for go/no‑go assessments, fit verifications or end‑of‑line checks. The tight clearance control reduces downstream rework and improves first‑pass yield, translating directly into lower production interruptions. By relying on a precision pin with a defined diameter and minimal run‑out, inspection routines become faster and more dependable, helping to maintain process stability in small‑batch and serial production alike. Durable workshop construction for everyday handling Manufactured from special steel, the component is engineered for workshop conditions where robustness and resistance to handling are important. The workshop version design balances dimensional stability with practical toughness; the compact 50 mm length and solid cross‑section reduce bending risk during use. Delivered in a protective transport case, the item is protected during storage and movement, which preserves its dimensional integrity and keeps maintenance effort to a minimum. Integrates smoothly into measurement and assembly workflows As a simple, single datum element, the pin is suitable for quick insertion into fixtures, bore checks and assembly jigs: it acts as a repeatable reference for alignment and gauging tasks. The straightforward geometry and defined diameter support rapid use in quality control stations and hand‑held verification procedures. Where accurate end‑measure confirmation is required, the gauge pin provides a fast, low‑complexity solution that complements digital and mechanical inspection tools. Practical handling and traceable identity for shopfloor use With a compact mass of 0.15 kg and clearly specified dimensions, the product is easy to transport between inspection benches and fits into standard storage solutions. The precise diameter specification supports consistent interchangeability across fixtures and reduces measurement uncertainty during assembly operations. Combined with Metav’s quality filter and inventory management, the component forms part of a dependable supply chain for workshops seeking repeatable precision without excessive complexity. For reliable workshop measurement, order the Metav IndustryLine gauge pin directly from Metav Werkzeuge or contact our application experts at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice. Technical data Article number: M323.I51 GTIN: 4061905449376 Label: Gauge pin, single, Ø 18.51 mm, length 50 mm Core specifications Diameter: Ø 18.51 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: special steel Supplied in protective transport case Suitable for end‑measure and fit verification FAQ What applications suit this gauge pin best? The gauge pin is ideal for end‑measure checks, fit verification and fixture alignment in workshop and production settings; the Metav IndustryLine gauge pin (M323.I51) is designed for these repetitive inspection tasks. Is the diameter tolerance sufficient for precision assemblies? Yes, the ±0.002 mm tolerance of the gauge pin supports high repeatability and is suitable for tight‑fit assemblies and quality control points where minimal variation is required. How is the pin delivered and protected in transit? The item is supplied in a protective transport case to reduce handling damage during shipment and storage. Can this pin be used alongside digital gauges and fixtures? The cylindrical datum form and defined diameter make the pin compatible with mechanical fixtures and digital inspection setups, supporting seamless integration into existing workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.53mm Gauge Pin, Workshop Version, 50mm Length, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the workshop‑grade combination of high precision (±0.002 mm), special steel construction and compact handling to shorten inspection cycles and secure repeatable end‑measure results. Order the gauge pin directly via Metav Werkzeuge or consult the Metav technical team for application advice. Metav IndustryLine Gauge Pin M323.I53 — Ø 18.53 mm, 50 mm length The M323.I53 gauge pin is a single, workshop‑grade test pin designed for end‑measure checks and go/no‑go verification in production and inspection areas. Precision tolerance ±0.002 mm Diameter Ø 18.53 mm 50 mm length, workshop grade Supplied in protective case Reliable measurement performance for routine inspection The compact test pin delivers consistent, repeatable measurements thanks to its tight tolerance of ±0.002 mm, which places it in the high‑precision range for workshop gauges. Built from special steel, the pin resists wear during frequent insertion and withdrawal cycles, reducing the need for premature replacement and keeping inspection throughput high. As a single‑piece plug gauge, it simplifies end‑measure checks and supports rapid go/no‑go decisions on production lines, shortening cycle time while maintaining traceable accuracy. Robust design suited to workshop environments Engineered as a workshop grade component, the pin combines a nominal Ø 18.53 mm diameter with a 50 mm active length to suit a broad range of bore and feature checks. The construction emphasises stable handling and minimal deformation under normal use, and the supplied protective case ensures safe transport and storage between shifts. The moderate weight and compact footprint make the pin easy to integrate into handheld inspection routines or bench setups without adding bulk to toolkits. Practical applications and process benefits This single test pin is ideal for final dimension verification, end‑measure controls and quick acceptance checks during series production. By standardising on a precision reference such as this, internal inspection routines gain clarity: fewer ambiguous results, faster decisions and a clear pass/fail criterion. For small‑batch quality assurance or repetitive sample checks, the pin supports reproducible outcomes and reduces scrap caused by measurement uncertainty. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice on integrating the M323.I53 gauge pin into inspection workflows and spare‑part planning. Technical data SKU: M323.I53 GTIN: 4061905449390 Category: Gauge pins Numbers / Core technical data Diameter: 18.53 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features / Versions Workshop execution Material: special steel Single test pin (individual item) Supplied in protective transport case ECLASS: 21170231 FAQ What level of accuracy does this gauge pin provide? The M323.I53 gauge pin from Metav IndustryLine offers a manufacturing tolerance of ±0.002 mm, making it suitable for high‑precision end‑measure and plug checks in workshop environments. Which applications are typical for this test pin? The Metav IndustryLine M323.I53 is intended for end‑measure verification, go/no‑go testing and routine bore checks in production and inspection processes. Is the pin ready for workshop use on delivery? The M323.I53 is supplied as a single, ready‑to‑use test pin in a protective case, designed to be incorporated immediately into inspection routines. What material is the gauge pin made from and why does it matter? Manufactured from special steel, the M323.I53 combines wear resistance with dimensional stability, which helps preserve precision over repeated use and extends service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.54mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Compact Ø 18.54 mm gauge pin with ±0.002 mm tolerance and 50 mm length provides workshop-ready precision and repeatable end-dimension checks; order this Metav IndustryLine component directly via Metav Werkzeuge or consult our advisors if required. Gauge pin, single, 18.54 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single, 18.54 mm diameter, 50 mm length is a workshop‑grade cylindrical reference pin for end‑dimension verification and fixture set‑up in general metalworking and precision inspection tasks. Workshop-grade construction for durability Diameter 18.54 mm for end‑dimension checks Length 50 mm, compact and easy to handle Dimensional tolerance ±0.002 mm for precision Consistent precision for end‑dimension verification The cylindrical reference pin is engineered for repeatability in end‑dimension measurements. With a nominal diameter of Ø 18.54 mm and a verified dimensional tolerance of ±0.002 mm, the component supports fine control in inspection routines and gauge stacks. Constructed from special steel, the pin resists wear in routine shop use while maintaining stable geometry; this ensures reproducible readings when verifying shafts, bores and mating parts. The compact format minimises thermal mass, so short‑term temperature shifts have reduced effect compared with larger artefacts. Robust workshop design and practical handling Designed as a workshop-grade tool, the pin combines hardened material choice with a manageable 50 mm length to balance stiffness and accessibility. The shortened profile reduces bending under manual handling and simplifies insertion into tight jigs and fixture pockets. Supplied as a single piece and protected for transport in a compact transport box, the item is easy to store and move between inspection benches. The modest mass contributes to safe handling in busy production environments while preserving the mechanical integrity required for repeated use. Where it fits in the measurement workflow This compact cylindrical gauge is particularly useful for final-size checks, fixture set‑up and quick go/no‑go validation of end dimensions in component production. The pin supports a rational quality workflow: rapid verification reduces rework and supports consistent assembly tolerances, while the reliable geometric reference shortens inspection cycles. In small‑batch and repair work, the combination of precision and portability keeps inspection close to the process, increasing throughput without sacrificing measurement quality. For workshop-ready precision from Metav IndustryLine, request details or procure the gauge pin via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific tasks. Technical data Article number: M323.I54 GTIN: 4061905449406 Facts Diameter: 18.54 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Supplied as single piece Delivered in transport box FAQ What applications is this gauge pin suited for? The gauge pin (Metav IndustryLine, SKU M323.I54) is intended for end‑dimension verification, fixture set‑up and quick dimensional checks in metalworking and inspection workflows. Is the material suitable for regular shop use? Yes; the pin is made from special steel that gives wear resistance appropriate for routine measurement tasks and frequent handling. Can this pin be used for bore alignment or only external checks? The pin is optimised for end‑dimension and alignment tasks; it functions as a reference for both external and insertion checks depending on the jig or bore being measured. Does the tool include protective packaging for transport? The gauge pin is supplied as a single piece and delivered in a compact transport box to protect the reference surface during storage and transit. How precise is the diameter compared with typical workshop standards? With a tolerance of ±0.002 mm, the pin offers higher precision than standard workshop artefacts and is suitable where tight reproducibility is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.55mm Gauge Pin, Single 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-ready durability, ±0.002 mm accuracy and compact handling for reliable end-dimension control; order the pin via Metav Werkzeuge or consult our team for application advice. Gauge pin, single — Ø 18.55 mm, 50 mm length (Metav IndustryLine) A single gauge pin, the 18.55 mm Ø test pin, designed for precision end-dimension checks and workshop use Workshop version for robust daily use Diameter 18.55 mm with ±0.002 mm precision 50 mm solid test pin in special steel Supplied in transport case for secure storage Precision where measurement decisions become certain The gauge pin delivers a measured tolerance of ±0.002 mm, enabling repeatable pass/fail assessments on tight bores and end dimensions. Such accuracy reduces ambiguous results during incoming inspection and shortens corrective loops on the shop floor. Built for inspection tasks that demand verifiable limits, this pin supports traceable measurement workflows and makes dimension comparisons straightforward for production control or set-up checks. Built for the workshop — durable, compact and ready Manufactured in special steel and finished for the workshop version, the pin’s 50 mm length and compact mass make it easy to handle in jigs and fixtures while resisting the wear of daily use. The solid construction ensures stability when seated in bore checks and minimises deformation under light contact. Delivery in a transport case protects the surface and geometry during storage and movement, preserving the reference condition between uses. Practical uses across inspection and set-up tasks This test pin is suitable for precise end-dimension verification, go/no-go gauging and alignment aids in fixture manufacture. Its geometry is ideal for checking bore sizes, calibrating gauge blocks and establishing reference positions in assembly operations. The compact design helps technicians perform quick spot checks on production runs, supporting efficient quality control without elaborate measuring stations. Reliable supply and sensible precision from a measured partner Sourced from the Metav IndustryLine range, the item benefits from a distribution and quality filter geared to workshop realities: steady availability, clear product specification and a focus on practical metrology. Metav’s breadth of products and experience streamlines procurement and reduces the number of suppliers required for reliable inspection equipment, supporting consistent production throughput and traceable quality practices. For workshop-ready accuracy from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.I55 GTIN: 4061905070402 Description: single gauge pin Ø 18.55 mm, length 50 mm Facts Diameter: 18.55 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Supplied in transport case Intended for end-dimension and bore checks FAQ What tolerance is specified for this gauge pin? The gauge pin M323.I55 from Metav IndustryLine is specified with a tolerance of ±0.002 mm. Is an ISO 17025 calibration certificate included? The product data does not list an ISO 17025 calibration certificate; no ISO 17025 certificate is stated as included in standard delivery. Which measurement tasks is the pin intended for? The pin is intended for end-dimension checks, bore verification and fixture alignment where a compact precision reference is required. What material is the pin made from and how durable is it? Made from special steel and supplied in a workshop version finish, the pin resists everyday wear and is suitable for repeated inspection routines. Is the pin delivered with protection for transport and storage? Yes, the item is supplied in a transport case to protect the measuring surface and geometry during storage and movement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com