Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
18.56mm Gauge Pin 50mm Length Workshop Version Special Steel, Calibrated Case Included - Metav IndustryLine
Take advantage of workshop-ready construction together with tight dimensional control to keep end-measurement tasks efficient and reproducible; the combination of a 18.56 mm diameter and a ±0.002 mm tolerance ensures high repeatability in alignment and gauging operations. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisers for specification guidance. Gauge pin M323.I56 — workshop test pin, 18.56 mm Ø, 50 mm length A gauge pin M323.I56 designed for precise end‑measurement and alignment tasks in workshop and inspection environments Workshop-grade design Diameter 18.56 mm precision Length 50 mm robust shaft Tolerance ±0.002 mm accuracy Precision that supports faster decisions on the shop floor The M323.I56 is manufactured for repeatable end measurements and fits applications where dimensional certainty shortens rework cycles. With a nominal 18.56 mm diameter and a specified ±0.002 mm tolerance, the pin provides a measurable basis for pass/fail decisions and fixture alignment. The geometry minimises runout and contact ambiguity; when used as a reference pin in comparative gauging or end‑measure assemblies, the stable diameter reduces measurement scatter and supports quicker quality verdicts. Robust workshop design for everyday handling Built in a workshop-grade configuration, this test pin offers a compact 50 mm shaft that balances reach with handling comfort. The component is produced from special steel, delivering surface hardness and wear resistance appropriate for repeated seating in bores and gauges. At approximately 0.15 kg, the pin is substantial enough to sit stably in jigs yet small enough for easy manual placement. The construction reflects a focus on practical longevity rather than delicate laboratory use, so maintenance intervals and replacement cycles are predictable. Traceability, identification and fit for industrial workflows Identification marks and the SKU simplify inventory and procurement: Article number M323.I56 is traceable via GTIN 4061905070419 for efficient logistic handling. Supplied as a single test pin, the item is suitable for integration into established inspection routines and fixture sets that rely on precise reference diameters. Backed by a supplier that emphasises accessible precision, this component supports standardised processes and helps maintain consistent quality across production batches. For workshop-ready precision and reliable supply, request the M323.I56 gauge pin from Metav Werkzeuge or contact our consultants for tailored technical advice Technical Data Article number: M323.I56 GTIN: 4061905070419 Description: Test pin, single, 18.56 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 18.56 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Single item supply SKU: M323.I56 FAQ What materials is the pin made from? The M323.I56 gauge pin is manufactured from special steel, selected for wear resistance and stability in workshop use. How precise is the diameter specification? The pin carries a diameter specification of 18.56 mm with a dimensional tolerance of ±0.002 mm, suitable for tight gauging and alignment tasks. Is the pin supplied as a single item or in sets? This product is supplied as a single test pin (single item), identified as M323.I56 for straightforward inventory control. Which applications are typical for this test pin? The gauge pin is intended for end‑measurement, alignment and comparative gauging duties in workshop and inspection workflows where a compact, robust reference diameter is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.57mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from the combination of a precise 18.57 mm diameter, a tight ±0.002 mm tolerance and a robust 50 mm length for reproducible end-dimension checks; order the test pin directly via Metav Werkzeuge or consult our advisors for application matching. M323.I57 Test pin (18.57 mm diameter, 50 mm length) — Metav IndustryLine M323.I57 is a single test pin designed for precise end-measurement and gauge applications in workshop environments Precision diameter 18.57 mm Tight tolerance ±0.002 mm Robust 50 mm length for workshop use Made from special steel for durability Reliable reference for end-dimension checks The M323.I57 functions as a dependable reference gauge pin for end-dimension verification and assembly set-up. With a nominal diameter of 18.57 mm and an accuracy of ±0.002 mm, the component offers measurable, repeatable results that reduce rework and speed up inspection cycles. The single-piece design simplifies insertion and withdrawal from bores or fixtures, while the clearly defined dimensions support traceable verification routines in quality control. Built for daily workshop use and handling Presented in a workshop-grade finish, this test pin combines practical robustness with the required measuring precision. The 50 mm active length balances accessibility and stiffness, making the item suitable for routine gauge checks and fixture set-ups. Supplied as a single unit under SKU M323.I57 and GTIN 4061905071270, the pin is compact to store and straightforward to integrate into existing inspection kits. The moderate mass assists stable handling without excessive inertia during manual operations. Versatile application in measuring and assembly workflows As a dedicated gauge pin, the article supports end-dimension checks, go/no‑go verification and the calibration of inspection tooling. The tight dimensional specification makes it appropriate for use in precision workshops, small-batch production and measurement benches where consistent end measurements are required. The component’s workshop specification ensures durability in repetitive use scenarios and contributes to reliable process control when used alongside other calibrated inspection standards. For a tailored recommendation or to procure the Metav IndustryLine M323.I57 test pin for workshop metrology, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and supply options Technical data SKU: M323.I57 GTIN: 4061905071270 Category: Messstifte Facts Diameter: 18.57 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop execution Material: Special steel Single test pin Supplied in a protective case FAQ What is the nominal diameter and tolerance of this test pin? The M323.I57 test pin has a nominal diameter of 18.57 mm with a stated tolerance of ±0.002 mm. Which material is used for the test pin? The test pin is manufactured from special steel and produced in a workshop-grade finish suitable for regular use. Is the test pin supplied with a calibration certificate? The product data does not specify a calibration certificate; the item is supplied as a single workshop test pin (M323.I57). For which applications is this gauge pin intended? The gauge pin is intended for end-dimension checks, go/no‑go verification, fixture set-up and general workshop metrology tasks. Is the test pin delivered in protective packaging? The M323.I57 is supplied in a protective case to facilitate safe transport and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.58mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from a combination of ±0.002 mm measurement accuracy, a precise Ø 18.58 mm diameter and a robust 50 mm length for reproducible bore checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 18.58 mm — 50 mm length (Metav IndustryLine) The Gauge pin Ø 18.58 mm provides a compact, high-precision inspection element for checking bore diameters and reference fits in production and quality control. High-precision tolerance ±0.002 mm Workshop-grade special steel construction Exact diameter Ø18.58 mm for fit checks 50 mm length for stable handling Consistent measurement for reproducible tolerances A strict focus on repeatability defines this inspection element: the ±0.002 mm tolerance ensures that dimensional checks produce reliable pass/fail decisions and reduce downstream rework. Used as a reference for assembly and quality control, the gauge pin delivers a stable datum for go/no-go assessments. The compact geometry minimises bending moments during insertion, so measured dimensions remain representative of the component rather than the operator’s handling. Robust workshop design for continuous use Constructed from special steel and offered in a workshop version, the element resists everyday wear while keeping handling straightforward. The 50 mm length provides sufficient gripping area for manual checks without compromising stiffness, while the exact Ø 18.58 mm diameter suits tight-fit verifications. The overall design supports frequent inspection cycles on the shop floor and integrates easily into bench setups or inspection fixtures, extending tool life and improving process reliability. Practical application and handling guidance For typical applications such as bore verification, reference-fit testing and final inspection, the pin functions as a reliable go/no-go reference. Clean contact surfaces before use and store the element in a corrosion‑protective environment to maintain dimensional integrity. Routine visual inspection for nicks and burrs preserves measurement quality; damaged items should be withdrawn from inspection work to avoid false readings. The robust construction and defined tolerance contribute to efficient quality processes and clearer production decisions. Choose the Metav IndustryLine gauge pin for dependable inspection results and contact Metav Werkzeuge for tailored supply and expert guidance on integrating this element into existing measurement routines Technical data Article number: M323.I58 GTIN: 4061905071287 Label: Gauge pin, single, 18.58 mm, length 50 mm Category: Messstifte Facts Diameter: 18.58 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version eClass: 21170231 Story trigger: endmasse FAQ What diameter and tolerance does this gauge pin have? The gauge pin M323.I58 has a diameter of 18.58 mm and an accuracy of ±0.002 mm. What material is used for the M323.I58 gauge pin? The M323.I58 gauge pin is manufactured from special steel in a workshop-grade execution. For which applications is the M323.I58 intended? The M323.I58 gauge pin is suited to bore verification, reference-fit checks and final inspection tasks in production and quality control. Is the M323.I58 supplied calibrated? The product data does not specify that the M323.I58 gauge pin is supplied calibrated. How should the M323.I58 be maintained to retain accuracy? Keep the M323.I58 clean and free of debris, protect it from corrosion and inspect for surface damage before use to preserve measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.59mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability, compact dimensions and workshop‑grade material for dependable end‑measure checks; the precise 18.59 mm diameter and ±0.002 mm tolerance reduce rework and support consistent assembly quality. Order the part directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.I59 — single inspection pin, 18.59 mm dia, 50 mm length (Metav IndustryLine) The gauge pin M323.I59 is a precision inspection pin intended for end‑measure and fit testing in production and quality control, offering consistent reference dimensions for assembly verification and go/no‑go checks High‑precision tolerance ±0.002 mm Diameter 18.59 mm, length 50 mm Material: special steel for industrial use Workshop version for robust handling Consistent metrology for repeatable checks The M323.I59 is designed for reliable dimensional checks in manufacturing environments where repeatability matters. With a nominal diameter of 18.59 mm and a declared tolerance of ±0.002 mm, the pin provides a stable reference for socket and bore inspections, reducing uncertainty during end‑of‑line verification. The compact 50 mm length gives good handling while limiting deflection, so measurements and fit assessments remain reproducible. This factual specification helps planners and quality engineers select the correct reference gauge for in‑process or final inspections. Built for workshop conditions and frequent use As a workshop version, the inspection pin is intended for regular handling and robust operation on the shop floor. Manufactured from special steel, the component balances wear resistance with manufacturability to withstand repeated insertion and withdrawal cycles. The straightforward geometry simplifies cleaning and visual inspection, supporting fast cycle times in assembly checks. Engineers benefit from a tool that does not require complex maintenance while delivering durable service life under typical industrial conditions. Practical application, traceability and integration The single inspection pin is suitable for go/no‑go evaluations, fit control and end‑measure tasks across production, assembly and toolmaking. The compact design makes it suitable for fixture insertion or manual gauging, while the declared tolerance allows planners to incorporate the pin into control plans and dimensional studies. For tailored measurement strategies or batch traceability, Metav Werkzeuge provides further product data and logistical support from its Emmerich hub, ensuring predictable supply for continuous operations. Speak to Metav Werkzeuge for delivery from Emmerich and specify the M323.I59 gauge pin for precise end‑measure checks and reliable workshop performance Technical data Article number: M323.I59 GTIN: 4061905071294 Manufacturer: Metav IndustryLine Category: Gauge pins Facts Diameter: 18.59 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: Special steel Single inspection pin FAQ What is the declared tolerance of this inspection pin? The gauge pin M323.I59 is specified with a tolerance of ±0.002 mm, suitable for fine dimensional checks and fit testing. Which materials is the pin made from? The pin is made of special steel, providing wear resistance appropriate for routine workshop use. How is the pin typically used in quality control? Typical applications include end‑measure checks, bore and fit testing and go/no‑go evaluations where a fixed reference diameter is required. Can the pin be integrated into fixtures or manual gauges? Yes, the compact 50 mm length and standard geometry make the pin compatible with fixtures, insertion gauges and manual inspection processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.61mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the workshop-grade construction, the ±0.002 mm tolerance and the compact 18.61 mm diameter for reproducible end‑dimension checks; order the test pin from Metav Werkzeuge or ask our consultants for application advice. Metav IndustryLine Test pin – 18.61 mm diameter, 50 mm length The Test pin, 18.61 mm (50 mm length) is a workshop‑grade gauge pin for precise end‑dimension inspection and fixture alignment in production and inspection tasks. Workshop-grade execution Diameter 18.61 mm, 50 mm length Tolerance ±0.002 mm Delivered in transport case Precision that keeps production within tolerance The compact, hardened gauge pin provides a certified mechanical fit with a stated tolerance of ±0.002 mm, making it suitable for high‑accuracy go/no‑go checks and repeatable reference measurements. The fine tolerance ensures consistent mating with sockets and bores, reducing rework and first‑article rejection rates. Where repeatability and a narrow error band are required, the reduced clearance afforded by the 18.61 mm diameter shortens setup time and improves inspection throughput by allowing confident pass/fail decisions on the shop floor. Robust material and workshop‑ready handling Manufactured from special steel and specified as a workshop‑grade item, the component combines hardness with dimensional stability for frequent handling. The 50 mm length offers a stable engagement depth while keeping weight low for easy mounting; the listed mass is 0.15 kg. Delivered in a protective transport case, the pin arrives ready for secure storage and transport between bench and inspection station, preserving surface finish and nominal dimensions over repeated use. Fits into established inspection and fixturing workflows Designed as a single test pin for direct insertion into gauges, sockets and alignment fixtures, this component integrates seamlessly into modular inspection rigs and quick‑change holders. Using it as a reference reduces measuring uncertainty during setup and supports traceable in‑process checks. The compact design and workshop specification make it a practical choice for maintenance, fixture set‑up and small‑batch production where precise end‑measure verification is essential. Identification: M323.I61 for ordering and inventory control. For workshop‑grade gauging with the Metav IndustryLine test pin M323.I61, contact Metav Werkzeuge for technical guidance and delivery arrangements via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M323.I61 GTIN: 4061905071836 Description: Test pin, 18.61 mm diameter, 50 mm length Weight: 0.15 kg Facts Diameter: 18.61 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Special features Material: Special steel Workshop‑grade execution Delivery: protective transport case FAQ What is the intended use of this test pin? This test pin is intended for end‑dimension verification, fixture alignment and reference checks in workshop and inspection environments; the compact diameter and length suit small to medium bores. Which accuracy can be expected from the component? The pin is specified with a tolerance of ±0.002 mm, which supports tight go/no‑go decisions and improves repeatability in production checks. Is the material suitable for repeated shop‑floor use? Yes, the component is made from special steel and specified as workshop‑grade, offering a balance of hardness and durability for frequent handling. How is the product identified for ordering? Order reference is M323.I61; the entry includes GTIN 4061905071836 for inventory systems and procurement workflows. Does the delivery include protection for transport? The item is supplied in a protective transport case to preserve finish and dimensional integrity during shipping and storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.62mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high accuracy (±0.002 mm), compact 18.62 mm diameter and a robust special-steel construction for reliable end-measure verification in fine mechanical and workshop settings. Order the article directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.I62 – 18.62 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I62 is a single precision pin intended for end-measure verification and setting tasks in workshops and precision engineering, supplied as a workshop‑grade test pin with a 50 mm measuring length. Workshop-grade construction Diameter 18.62 mm for end measurements Tight tolerance ±0.002 mm Solid special-steel design Consistent accuracy for repeatable end measurements A compact precision element, this gauge pin delivers repeatability where narrow tolerances matter. With a nominal diameter of 18.62 mm and a declared accuracy of ±0.002 mm, the component is engineered to reduce measurement scatter during acceptance checks and tool set-up. The 50 mm measuring length provides a stable support for insertion and alignment tasks while the special steel material keeps deformation under load to a minimum, allowing consistent results across repetitive operations. Suited to micro-range precision and fine mechanical tasks Designed for small‑scale metrology, the pin sits within the micro-range of measurement tools and is therefore appropriate for precision workshops, gauge jigs and finishing operations where compact dimensions are essential. The article M323.I62 is useful for verifying bore ends, calibrating fixtures and establishing reference positions in assembly sequences. Its geometry simplifies integration into test benches and fixtures commonly used in precision engineering, making throughput improvements measurable and predictable. Built for workshop use and industrial wear resistance The workshop-grade execution reflects a focus on durability and day-to-day robustness. Manufactured from special steel, the pin resists surface wear and maintains diameter integrity under repeated insertion cycles, which reduces the need for frequent replacement and supports continuous production. This industrial construction pairs well with automated handling or manual inspection routines, offering a balance between resilience and the fine tolerances demanded by routine quality controls. Practical handling and process benefits in inspection workflows In practice, the gauge pin speeds up inspection routines by delivering a ready reference for end-measure checks and pass/fail trials. The 50 mm length aids secure clamping and stable positioning in gauges and bores, while the precise diameter and tight tolerance minimise measurement uncertainty when used alongside comparators, dial gauges or coordinate measurement devices. Implementing such a standardised pin in a measurement plan leads to quicker decision cycles, fewer reworks and higher confidence in dimensional conformity. For dependable, workshop-ready precision choose the Metav IndustryLine M323.I62 gauge pin—contact Metav Werkzeuge for tailored advice and to arrange dispatch from Emmerich. Technical Data SKU: M323.I62 GTIN: 4061905071843 Label: Gauge pin, single 18.62 mm length 50 mm Facts Diameter: 18.62 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Material: Special steel Special features Workshop‑grade execution Category: Gauge pins (Messstifte) Suitable for end‑measure verification Designed for repetitive insertion and alignment tasks FAQ What tolerance can be expected from this gauge pin? The M323.I62 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for fine mechanical and workshop measurement tasks. Which materials is the pin made from and how does that affect wear? This test pin is manufactured from special steel, which enhances surface durability and helps maintain dimensional stability under repeated use. Is the gauge pin suitable for setting fixtures and bore gauges? Yes, the pin’s 50 mm length and precise 18.62 mm diameter make it well suited for fixture setting, bore verification and alignment operations in precision engineering. Can this pin be used in automated inspection stations? The robust, workshop‑grade construction of the M323.I62 allows integration into automated handling and inspection systems where repeatability and resistance to wear are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.63mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Taking advantage of precision and robust workshop‑grade construction, this gauge pin delivers consistent end‑measurements with a tight ±0.002 mm tolerance and a handy 50 mm working length. Order the part directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single Ø18.63 mm, 50 mm length — ±0.002 mm tolerance (Metav IndustryLine) A Gauge pin, single Ø18.63 mm, 50 mm length designed for precise end‑measurements and setup checks in workshop and inspection environments. Workshop-grade execution Diameter Ø18.63 mm tolerance ±0.002 mm 50 mm working length for end measurements Supplied in protective transport case Precision tailored to micro‑scale tasks The pin belongs to the Micro range (max measuring range 10–100 mm), making it ideal where compact dimensions and minimal flex matter. With a declared ±0.002 mm tolerance, this measurement pin functions as a reliable reference for fine mechanical work and short‑range checks. The close tolerance reduces uncertainty during setup and inspection, which in turn lowers rework rates and shortens cycle times. The small footprint and stable geometry make the item particularly suitable for precision fixtures and components where repeatable end‑measurements are required. Durable design for everyday workshop use Constructed from special steel and executed as a workshop‑grade tool, the pin is built to withstand regular handling and rougher shop conditions while keeping measurement integrity. The 50 mm working length and compact diameter combine practical handling with sufficient reach for common end‑measurement tasks. A protective transport case is included for safe storage and secure transport between workstations or job sites, which preserves the measuring surface and extends service life without adding complexity to daily workflows. Faster, more reliable inspection and setup Using a precisely made measurement pin delivers tangible operational benefits: improved repeatability, quicker reference checks and reduced machine downtime during setup. Lightweight handling and compact dimensions simplify integration into test rigs and gauging assemblies, while the robust material choice maintains geometric stability over repeated use. The combination of accuracy and practical design supports a more efficient inspection routine and greater confidence in measurement results. For reliable micro‑precision in workshop tasks, contact Metav Werkzeuge to order the Metav IndustryLine gauge pin or request tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.I63 GTIN: 4061905071850 Brand: Metav IndustryLine Material: Special steel Weight: 0.15 kg Length: 50 mm Diameter: 18.63 mm Declared tolerance: ±0.002 mm Facts Length: 50 mm Diameter: 18.63 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Supplied in protective transport case Category: Micro (max measuring range 10–100 mm) Compact geometry for minimal flex FAQ What is the intended application for this gauge pin? The gauge pin is intended for precise end‑measurements, alignment checks and fixture verification in workshop and inspection settings; the Metav IndustryLine gauge pin M323.I63 is especially suited to micro‑scale tasks. How precise is the measurement pin? The pin is manufactured to a declared tolerance of ±0.002 mm, providing high‑precision reference results for short‑range measurement tasks. Which materials and environments is the pin suitable for? Made from special steel, the pin is designed for general workshop environments where mechanical durability and stable geometry are required. Is the gauge pin delivered ready for use and how is it packaged? The gauge pin is supplied in a protective transport case to preserve the measuring surfaces during storage and transit. Can this pin be used for fixture setup on small assemblies? Yes, the compact diameter and 50 mm working length make it well suited to fixture setup and component alignment on small to medium assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.64mm Gauge Pin, Workshop Version, 50mm Length, ±0.002 Accuracy - Metav IndustryLine
Precise workshop measurement combined with robust handling: the 18.64 mm gauge pin with a 50 mm usable length provides repeatable end‑measure verification and a tight variation of ±0.002 mm, ideal for routine inspection tasks in small‑part production. Supplied in a protective transport case, this workshop‑grade test pin streamlines dimensional checks and reduces rework. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — 18.64 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single — 18.64 mm diameter, 50 mm length is a workshop‑grade test pin for precise end‑measure verification and dimensional checks of small components in metrology and quality control. Workshop‑grade finish Precision diameter 18.64 mm 50 mm usable length for end measurements Supplied in protective transport case Reliable end‑measure verification for small components The pin is classified in the micro measuring range (up to 100 mm), making it suitable where compact size and high repeatability matter. Manufactured from special steel and finished for workshop use, the component offers a measured variation of ±0.002 mm, which supports consistent pass/fail decisions during routine inspections. The combination of a defined 18.64 mm diameter and a 50 mm length provides a stable contact area for end‑stop checks and calibrated references, reducing measurement scatter and improving throughput in repetitive testing sequences. Built for robust workshop handling and simple integration A workshop‑grade design ensures the pin resists everyday handling and remains stable under normal inspection forces. The moderate mass (approximately 0.15 kg) and compact geometry allow easy positioning in fixtures or on datum surfaces, while the hardened surface of the special steel minimises wear during repeated cycles. Delivered in a protective transport case, the test pin arrives ready for use and is protected in transit — an advantage for mobile measurement teams and busy shop floors where secure storage and transport matter. Traceability, identification and practical use in inspection workflows Identified as M323.I64 and registered under GTIN 4061905071867, the pin supports orderly inventory and traceability in quality systems. Its straightforward geometry simplifies visual and tactile checks and keeps measurement setups concise, which helps reduce set‑up time on gauges and fixtures. As a Metav IndustryLine tool, the component benefits from the company's emphasis on making high precision accessible: a broad product range and consolidated supply reduce procurement complexity and increase process reliability for workshops and small production lines. For reliable small‑part inspection, request the Metav IndustryLine M323.I64 gauge pin through Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice Technical data SKU: M323.I64 GTIN: 4061905071867 Eclass: 21170231 Material: Special steel Weight: 0.15 kg Facts Diameter / measuring range: 18.64 mm Length: 50 mm Accuracy variation: ±0.002 mm Special features Workshop-grade finish Supplied in protective transport case Category: Gauge pins Label: Prüfstift, single, 18.64 mm length 50 mm FAQ What is the intended application for this gauge pin? The gauge pin is designed for end‑measure verification and dimensional checks of small components; it suits workshop inspection routines and fixture checks where a precise reference of 18.64 mm is required. What material is the pin made from and how does that affect wear? Made from special steel, the pin provides a hardened contact surface that improves wear resistance during repeated measurements and prolongs service life in workshop environments. Is the pin supplied ready for transport and storage? Yes, the test pin is delivered in a protective transport case to protect the reference surface during shipment and handling. Which accuracy can be expected when using this pin? The item has a variation specification of ±0.002 mm, suitable for precise repeatability in small‑part inspection tasks. How is the product identified for traceability? Identification is via SKU M323.I64 and GTIN 4061905071867, which supports inventory management and traceability in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.65mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, ±0.002 Accuracy, Supplied In Case - Metav IndustryLine
Precision plug ensures repeatable diameter checks with ±0.002 mm tolerance and robust special steel construction; supplied in a transport case for safe handling. Order this gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single – Ø 18.65 mm, length 50 mm (Metav IndustryLine) A gauge pin, single, Ø 18.65 mm, designed for reliable diameter verification and end-measure checks in workshop and inspection routines Workshop version for robust everyday use Tolerance ±0.002 mm for high precision Special steel for wear resistance Supplied in transport case for safe storage Accurate diameter verification for repeatable inspection results The cylindrical pin provides a clearly defined reference for go/no-go and comparative checks, with a specified tolerance of ±0.002 mm that supports tight production tolerances. As a hardened measurement element, the pin converts dimensional uncertainty into a reproducible datum: the stated Ø 18.65 mm ensures fast verification of bore diameters, seating fits and end measures while reducing rework caused by ambiguous readings. This design suits workshop inspection benches and in‑process control stations where consistent repeatability accelerates quality decisions. Robust construction for long service life in workshop environments Manufactured from special steel, the pin is optimised for abrasion resistance and dimensional stability under regular use. The workshop version balances hardness with toughness to tolerate handling and typical bench conditions without sacrificing metrological integrity. Supplied in a transport case, the pin is protected during storage and transit, which extends service life and maintains the calibrated surface condition. The combination of material choice and protective packaging reduces downtime for replacements and preserves measurement fidelity over many inspection cycles. Practical handling and application-oriented design At 50 mm overall length the pin is convenient for hand insertion and bench-mounted checks while providing sufficient contact length for secure seating in tapered or stepped bores. As a simple, mechanical reference element, the pin requires no power or data output and integrates smoothly into existing inspection workflows. Where precise end measurements or plug checks are required, this measurement pin provides a straightforward, low‑maintenance solution that complements micrometre and gauge-block setups in daily quality control. Contact Metav Werkzeuge for specification advice or to request a quotation for this Metav IndustryLine gauge pin with ±0.002 mm accuracy Technical Data Article number: M323.I65 GTIN: 4061905072352 Manufacturer: Metav IndustryLine Facts Diameter: 18.65 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Version: Workshop edition Packaging: Supplied in transport case FAQ What tolerance does the gauge pin offer? The gauge pin is specified with an accuracy of ±0.002 mm, suitable for fine workshop inspection tasks. Which material is used for the pin? The pin is made from special steel, chosen for wear resistance and dimensional stability during routine checks. Is the pin supplied with protective packaging? Yes, the gauge pin is supplied in a transport case to protect the measuring surfaces during storage and transit. How long is the measurement contact area? The pin has an overall length of 50 mm, providing adequate contact for bore and end‑face checks. Can this pin be used for go/no-go checks? This cylindrical measurement element is suitable for go/no‑go and seating checks where a defined reference diameter of 18.65 mm is required. Is the product compatible with standard bench inspection setups? The compact, hardened design integrates directly into common inspection benches and complements handheld micrometres and gauge blocks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.66mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise size control and workshop-ready robustness for reliable end‑measure checks; the combination of ±0.002 mm accuracy, a true diameter of 18.66 mm and a 50 mm length yields consistent fit verification with little setup time. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.I66 — 18.66 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin 18.66 mm designed for accurate fit checks and end‑measure verification in workshop metrology. High precision ±0.002 mm accuracy Diameter 18.66 mm, length 50 mm Robust special steel, workshop version Repeatable size control for production-ready parts The inspection pin is manufactured to a tight tolerance of ±0.002 mm, providing a measurable reference that supports reproducible fit checks and final dimension acceptance in serial work. With a nominal diameter of 18.66 mm and a working length of 50 mm, the component serves as a straightforward go/no‑go reference for bores, clearances and mating parts. The clear numeric specification removes ambiguity during quality checks and helps to reduce false rejects by offering a verifiable datum for routine inspection tasks. Built for daily workshop handling and longevity Constructed from special steel and presented as a workshop version, the pin combines surface stability with resistance to the light shocks and handling typical in production environments. The mass of approximately 0.15 kg provides a solid feel without being unwieldy for bench inspection, while the single‑piece design minimises handling complexity. This robustness translates into lower replacement frequency and a steady inspection routine, saving time otherwise lost to frequent re‑adjustment or calibration cycles. Fast integration into inspection workflows As a single reference pin, the item simplifies end‑measure operations: insert, check, document. The compact geometry and fixed diameter reduce fixturing needs and speed up throughput in small‑batch or larger production runs. Where traceability is required, the clear SKU and GTIN ensure easy recording in inventory and quality logs; for specialised measurement chains, the pin functions as a reliable mechanical datum that supports consistent decision‑making during assembly and final inspection. Contact Metav Werkzeuge today to confirm how the Metav IndustryLine gauge pin M323.I66 fits into existing inspection routines and to request personalised advice from our consultants in Emmerich Technical data Name: Prüfstift, einzeln, 18,66 mm Länge 50 mm Article number: M323.I66 GTIN: 4061905072369 Manufacturer: Metav IndustryLine Facts Diameter: 18.66 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.15 kg Measurement range min/max: 18.66 mm / 18.66 mm Special features Material: special steel Workshop version Single inspection pin FAQ What tolerance is specified for this gauge pin? The Metav IndustryLine gauge pin (SKU M323.I66) is specified with a tolerance of ±0.002 mm. What is the primary application of this inspection pin? The inspection pin is intended for end‑measure verification, fit checks and as a mechanical datum for bore and clearance testing in workshop metrology. Is a calibration certificate included with the pin? No ISO 17025 calibration certificate is indicated for this item; standard delivery does not include an accredited calibration document. How should the pin be handled to preserve accuracy? Handle the pin with clean, dry hands or gloves, avoid shocks and store in a dry environment to prevent corrosion; regular visual inspection is recommended to detect wear. Can this pin be used for go/no‑go checking of mating parts? Yes, the fixed diameter and tight tolerance make the pin suitable as a reference for go/no‑go fit checks and final acceptance testing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.67mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combining ±0.002 mm repeatability with a special steel construction and a compact 50 mm length, this gauge pin delivers dependable end‑measure checks and stable reference points in routine inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for technical advice. Gauge pin M323.I67 — Test pin, 18.67 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I67 is a precision test pin designed for end‑of‑line checks and reference measuring in workshop and production inspection setups. High repeatability ±0.002 mm Special steel construction Precision diameter 18.67 mm Compact 50 mm nominal length Reliable precision for everyday inspection The core benefit of this reference pin is consistent metrology: a diameter of 18.67 mm combined with a tolerance of ±0.002 mm produces highly reproducible contact conditions for end‑measure checks. In practical terms, the tiny permissible deviation lowers measurement uncertainty when comparing batch parts or setting up go/no‑go fixtures, which translates into fewer false rejects and a smoother quality workflow. The supplied dimensions and tolerance make the component suitable as a fixed reference in jigs and small inspection benches. Robust design that keeps production moving Built from special steel, the pin is finished for wear resistance and stable contact behaviour under repeated use. At a nominal length of 50 mm and a mass of 0.15 kg, the component balances manoeuvrability and stiffness, giving good handling on the bench while avoiding bending under normal contact forces. The workshop design is intended for routine production environments where durability and repeatability matter most: a single test pin can reduce fixture downtime and support quicker set‑ups, improving throughput in small to medium manufacturing operations. Easy integration into measurement routines As a plain cylindrical reference, the pin fits common clamping and locating systems and serves well for end‑measure, datum and reference checks. The straightforward geometry simplifies traceability: the part number and GTIN allow clear inventory handling and quick re‑ordering. For applications that require documented traceability, the pin can be recorded as the reference element in inspection protocols and fixture documentation. Metav’s product range and consultancy back the technical selection, so choosing a standardised reference component becomes part of a reliable supply chain rather than a one‑off decision. For precise end‑measure control, request the Metav IndustryLine gauge pin from Metav Werkzeuge and benefit from targeted advice and fast dispatch. Basic identifiers SKU: M323.I67 GTIN: 4061905072376 Manufacturer: Metav IndustryLine Core measurements Diameter: 18.67 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version for routine use Material: special steel Application: end‑measure checks and reference gauging FAQ What tolerance does the gauge pin offer? The gauge pin provides a tolerance of ±0.002 mm, ensuring high repeatability for reference and end‑measure tasks. Is the material suitable for frequent contact checks? Yes, the pin is made from special steel, selected for wear resistance and stable contact properties during repeated inspections. Can this pin be used in fixture and jig set‑ups? The M323.I67 is designed for integration into fixtures and locating systems as a reference element for routine measurement and alignment. What is the nominal length and diameter of this test pin? The test pin measures 50 mm in length with a precision diameter of 18.67 mm, offering a compact yet stiff reference for bench use. How should the pin be recorded for inventory and traceability? Use the SKU M323.I67 and GTIN 4061905072376 in inspection documentation to maintain traceability and simplify re‑ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.68mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, ±0.002 mm tolerance and a compact 18.68 mm nominal diameter for reliable end‑measurement routines; order the gauge pin directly via Metav Werkzeuge or consult our specialists for batch availability and compatibility. Gauge pin, single, 18.68 mm diameter, 50 mm length — Metav IndustryLine workshop execution with high tolerance Gauge pin, single, 18.68 mm diameter, 50 mm length provides a compact, high‑precision reference for end‑measurements and component checks in demanding workshop environments Workshop-grade construction Diameter 18.68 mm precision Length 50 mm for end measurements Tolerance ±0.002 mm accuracy Repeatable end measurements with micrometre-level control The single gauge pin is engineered for repeatable reference checks on bores, seats and end faces. With a nominal diameter of 18.68 mm and a declared tolerance of ±0.002 mm, it establishes a reliable measuring datum that reduces uncertainty during routine inspections. The special steel construction maintains form under mechanical stress, so process checks and simple go/no‑go verifications become faster and more consistent, lowering the need for corrective rework and shortening inspection cycles. Robust handling and workshop suitability Built as a workshop‑grade tool, the pin combines a compact 50 mm length with a manageable mass of 0.15 kg, making it straightforward to position by hand or in simple fixtures. The material choice supports repeated use in a busy production setting while keeping maintenance demands low. This compact format is particularly useful where space is limited but measurement integrity is essential, enabling quick insertion and withdrawal without disturbing adjacent features. Easy integration into inspection workflows and traceability The gauge pin is supplied under the Metav IndustryLine label and is identified as M323.I68, facilitating stock keeping and traceability within inspection plans. Its compact geometry and tight tolerance make it suitable for repeated inline checks or cyclical sampling protocols. Combined with Metav’s quality assurance approach and broad product range, this pin serves as a practical, dependable component of a workshop’s measurement toolkit, helping to uphold production standards across batches. Contact Metav Werkzeuge for availability, matching accessories and technical documentation for this Metav IndustryLine gauge pin (M323.I68) Technical data SKU: M323.I68 GTIN: 4061905072383 Brand: Metav IndustryLine Material: Special steel Nominal diameter: 18.68 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Facts Diameter: 18.68 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop execution Single gauge pin for end measurements Compact geometry for tight spaces Identified as M323.I68 for traceability FAQ What is the nominal diameter and tolerance of this gauge pin? The gauge pin (Metav IndustryLine, M323.I68) has a nominal diameter of 18.68 mm and a tolerance of ±0.002 mm. Which material is used for the pin and why is it chosen? This Metav IndustryLine gauge pin is made from special steel; the material provides the mechanical robustness required for frequent workshop use while preserving the pin’s dimensional stability. Is the pin suitable for end‑measurement of bores and seats? Yes, the single gauge pin M323.I68 is intended for end measurements and reference checks on bores, seats and end faces where a compact, precise datum is required. How is the product identified for stock and traceability? The product is referenced as M323.I68 and carries GTIN 4061905072383 to simplify inventory control and documentation in inspection workflows. Can the gauge pin be used in fixture or holding devices? The compact 50 mm length and robust construction of the Metav IndustryLine gauge pin make it compatible with simple fixtures and holding devices commonly used for repetitive inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.69mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Compact workshop‑grade gauge pin that combines a snug Ø 18.69 mm fit, a 50 mm functional length and a fine tolerance of ±0.002 mm for repeatable end‑dimension checks; robust special steel construction supports reliable, routine inspections. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. M323.I69 Test Pin — Workshop test pin, Ø 18.69 mm, 50 mm length (Metav IndustryLine) The M323.I69 is a compact, high‑precision workshop test pin intended for end‑measure verification and fixture checks in general metrology and production environments Precision fit Ø 18.69 mm 50 mm functional length Tolerance ±0.002 mm Workshop version, robust construction Reduce rework with traceable dimensional stability A tight tolerance of ±0.002 mm ensures that the gauge pin provides consistent reference dimensions during repetitive end‑measure checks. The controlled diameter of 18.69 mm reduces play in fixtures and holding devices, which in turn minimises setup variability and scrap. Presented as a single test pin, this component is suitable for insertion into gauge stacks, plug‑gauge holders and dedicated inspection jigs where a reliable reference diameter is required. Built for everyday workshop handling With a 50 mm functional length and a compact form, the pin is optimised for workshop applications where accessibility and handling speed matter. The body is manufactured from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions; this supports extended service life and stable repeatability across shifts. The workshop design emphasises straightforward integration into existing inspection routines without demanding specialised mounting or bespoke tooling. Confidence from a proven supplier network Procurement through Metav IndustryLine connects the component to a broad supply chain and a clear quality philosophy: practical, dependable metrology affordable for everyday industrial use. The product’s weight and dimensions make it simple to store and deploy on the shop floor, while Metav’s experience and catalogue coverage provide reassurance when matching pins to fixtures or complementary gauge elements. Technical advice and specification matching are available from the Metav team to support correct selection for specific measurement tasks. Contact Metav Werkzeuge for tailored advice on using the M323.I69 in gauge assemblies or for recommendations on compatible inspection accessories Technical data SKU: M323.I69 GTIN: 4061905072390 Manufacturer: Metav IndustryLine Core specifications Diameter: 18.69 mm Functional length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Single test pin delivery FAQ What is the primary use of this test pin? The test pin serves as a precise reference for end‑dimension checks, fixture set‑up and plug‑gauge based inspections using the M323.I69 test pin from Metav IndustryLine. Is the diameter suitable for precision gauge stacks? Yes, the 18.69 mm nominal diameter is manufactured to a fine tolerance (±0.002 mm), making the pin appropriate for use in gauge assemblies and fixture references. Can this pin be used for repeated production checks? The workshop design and special steel construction of the M323.I69 support routine production use and repeated insertion in inspection fixtures. How should the pin be stored to maintain accuracy? Store the pin clean and dry, ideally in protective packaging when not in use, to prevent surface contamination and preserve dimensional stability. Does the product include a certificate of calibration? No specific calibration certificate is included by default; the specification lists the manufacturing tolerance of ±0.002 mm for dimensional reference. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.6mm Test Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of tight ±0.002 mm tolerance, robust special-steel construction and compact 50 mm length for reliable end-size checks and fixture alignment. Order the gauge pin directly via Metav Werkzeuge or contact the Metav consultants for tailored technical advice. Gauge pin, single — 18.6 mm Ø, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end-size verification and locating tasks in workshop and production environments Workshop version for robust daily use Diameter 18.6 mm, precision ±0.002 mm 50 mm compact length for tight spaces Special-steel construction for long service life Consistent, measurable precision for end-size gauging The compact gauge pin delivers repeatable results thanks to a documented geometric tolerance of ±0.002 mm, which places it in a high-precision class suitable for fine gauging tasks. This level of conformity supports controlled assembly processes and accurate go/no-go checks on mating bores and locating features. The nominal diameter of 18.6 mm is produced to exacting roundness and straightness standards, ensuring that positional references and end-size comparisons remain stable during routine use. Such traceable precision reduces rework and helps maintain production throughput. Durable design built for workshop conditions Constructed from special steel, this single test pin is finished for workshop resilience and frequent handling. The 50 mm shank length and compact form factor make it straightforward to insert into fixtures and measurement rigs where space is limited, while the material choice balances hardness with wear resistance to preserve the measuring surface over repeated cycles. The unit mass of 0.15 kg gives a satisfying handling feel without excess bulk. The workshop specification signals suitability for daily use in tooling rooms, maintenance bays and production lines where robustness complements measurement reliability. Integrates smoothly into inspection and assembly routines The pin is intended for end-size verification, locating and alignment tasks in jigs, fixtures and inspection stands. Its precise diameter and controlled tolerance simplify pass/fail decisions during incoming inspection or in-process checks, and it pairs well with standard gauge blocks, bore gauges and fixture plates. For buyers seeking an immediately identifiable article, the product is listed under SKU M323.I60 and carries GTIN 4061905071300 for inventory and traceability. The combination of compact dimensions and tight tolerance supports efficient quality routines and reduces subjective judgement in manual gauging procedures. For dependable gauging components choose the Metav IndustryLine gauge pin M323.I60—contact Metav Werkzeuge for technical consultation or to arrange a direct supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.I60 GTIN: 4061905071300 Brand: Metav IndustryLine Facts Diameter: 18.6 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Intended for end-size verification and locating FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for end-size and locating measurements with the Metav IndustryLine test pin M323.I60. Is a calibration certificate included with the product? The product data does not specify an included calibration certificate; calibration status is not stated for this gauge pin in the supplied information. Which applications is the pin suited for? Typical uses include end-size verification, locating and alignment in jigs and fixtures, in-process checks and incoming inspection where an 18.6 mm reference diameter is required. What material is used and how durable is the pin? The pin is made of special steel, produced as a workshop-grade item to withstand frequent handling and maintain dimensional stability over time. How is the item identified for ordering and inventory? This gauge pin is listed under SKU M323.I60 and can be referenced with GTIN 4061905071300 for procurement and inventory systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.71mm Test Pin Single, Workshop Version, 50mm Length - Metav IndustryLine
High-precision workshop pin in special steel with a measured diameter of 18.71 mm and a length of 50 mm, offering repeatable inspection performance at a tolerance of ±0.002 mm. Benefit from robust construction and a protective transport case for safe handling — order directly via Metav Werkzeuge or consult our specialists for supply options. Gauge pin, single — 18.71 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single 18.71 mm is a workshop-grade precision pin designed for dimensional verification, fixture setting and go/no-go checks in production and inspection environments. Workshop-grade special steel construction Tolerance ±0.002 mm for high repeatability 18.71 mm cylindrical diameter Delivered in protective transport case Faster, more reliable inspection results A tight tolerance of ±0.002 mm minimises measurement uncertainty and reduces rework by providing clear go/no-go feedback during first-pass inspection. The defined 18.71 mm diameter serves as a stable reference for gauge blocks, plug gauges and fixture alignment; using a fixed-diameter reference accelerates pass/fail decisions and shortens inspection cycles. For production managers and quality engineers, the direct consequence is improved throughput and fewer ambiguous measurements in routine checks. Durable design that suits workshop environments Constructed from special steel, this single test pin is specified as a workshop-grade component and stands up to frequent handling and bench use. The 50 mm length gives sufficient engagement for many jigs and fixtures while keeping the pin easy to position by hand; the modest weight contributes to operator ergonomics during repetitive tasks. Supplied in a protective transport case, the pin arrives ready for safe storage and transport between inspection points without risk of damage to the measuring end. Simple integration into quality workflows As a single, traceable reference pin, this item fits neatly into fixture assemblies, plug gauges and measuring stations where a definitive diameter check is required. The stable geometry makes the component suitable for repeated comparative measurements, fixture set-up and final inspection steps. Where documentation or batch identification is required, the item is supplied with standard product identifiers for inventory and traceability within a calibrated inspection routine. Request supply and technical details for the Metav IndustryLine gauge pin M323.I71 from Metav Werkzeuge in Emmerich for tailored delivery and specification advice Technical Data SKU: M323.I71 GTIN: 4061905072413 Label: Prüfstift, einzeln, 18,71 mm Länge 50 mm Weight: 0.15 kg Numbers / Core technical data Diameter: 18.71 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Single gauge pin Supplied in protective transport case FAQ What is the declared measurement tolerance of this pin? The declared tolerance is ±0.002 mm for the gauge pin M323.I71 from Metav IndustryLine, providing high repeatability for inspection tasks. Which material is the pin made from? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability under workshop conditions. Is this pin suitable for fixture setting and go/no-go checks? Yes; the single gauge pin is designed specifically for fixture setting, go/no-go checking and dimensional verification in production and inspection workflows. What are the dimensional identifiers for this product? The product is identified as SKU M323.I71 with GTIN 4061905072413 and has a diameter of 18.71 mm and a length of 50 mm. How is the pin delivered to protect the measuring face? The item is supplied in a protective transport case to prevent handling damage and to simplify storage between uses. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.72mm Test Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop‑hardened construction, ±0.002 mm tolerance and compact dimensions for reliable end‑measurement checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I72 — Precision gauge pin, 18.72 mm Ø, 50 mm length (Metav IndustryLine) A gauge pin M323.I72 engineered for accurate end‑measure verification and repeatable inspection tasks in workshop and quality‑control environments. Workshop version, robust construction Diameter 18.72 mm for end‑measure checks Tolerance ±0.002 mm for high repeatability Protective transport case included Accuracy that removes doubt from inspection The central technical advantage is the ±0.002 mm tolerance, which positions this gauge pin in the high‑precision segment for routine workshop inspections. Such a narrow deviation ensures repeatable end‑of‑shaft measurements and dependable reference checks during set‑up or final inspection. The specified accuracy minimises rework and supports consistent quality decisions in production and maintenance processes. Built for the workshop — durable and dependable Made from special steel and released as a workshop version, the pin withstands daily handling and moderate impacts typical in machine shops. The material choice balances hardness with toughness to preserve the measuring surface while resisting wear. Robust construction reduces the need for frequent replacement, ensuring stable measurement results over the part’s service life and saving time on recalibration cycles. Compact form factor for tight fixtures and assemblies With a diameter of 18.72 mm and a length of 50 mm, this precision pin suits confined measuring points and end‑dimension checks where access is limited. Classified within the micro range for calipers and pins (measurement ranges from 10–100 mm), the design combines adequate reach with low bending risk, enabling controlled, repeatable contact even in small jigs and fixtures. Practical handling and traceable delivery Supplied as a single, individually identified gauge pin, the item arrives ready for immediate use in inspection routines. Delivery includes a protective transport case to prevent surface damage during storage and transit, aiding traceability and preserving the calibrated surface finish. The compact mass and neat form factor make handling straightforward on the shop floor and simplify tool storage between measurement cycles. Contact Metav Werkzeuge for tailored advice on integrating the M323.I72 into inspection routines or to arrange immediate supply from our Emmerich stock Technical Data SKU: M323.I72 GTIN: 4061905072420 Manufacturer: Metav IndustryLine Weight: 0.15 kg Material: Special steel Length: 50 mm Diameter: 18.72 mm Tolerance / Accuracy: ±0.002 mm Label: Gauge pin, single, 18.72 mm diameter, 50 mm length Story trigger: end dimensions Facts Measurement range max: 18.72 mm Measurement range min: 18.72 mm Measurement resolution hundredths: 2 Measurement range tenths: 7 Special features Workshop design Delivered as single pin Protective transport case for transport and storage Ideal for end‑measure verification and inspection tasks FAQ What is the intended use of this gauge pin? This gauge pin is intended for end‑measurement verification and routine inspection tasks; the M323.I72 from Metav IndustryLine serves as a stable reference for end‑dimension checks. How precise is the measurement capability? The M323.I72 offers a tolerance of ±0.002 mm, providing high repeatability for shop‑floor inspection and set‑up verification. Which materials is the pin suited to measure or check? The pin is a dimensional reference rather than a cutting tool; it is suitable for gauging components made of metals and assemblies where an 18.72 mm reference diameter is required. Is the pin delivered ready for use and protected in transit? The gauge pin is supplied individually and comes in a protective transport case to preserve the measuring surface and simplify storage. Can the M323.I72 be used in tight fixtures and jigs? Yes; the compact 50 mm length and precise 18.72 mm diameter make it well suited to confined fixtures and end‑face measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.73mm Test Pin Single 50mm Length Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.002 mm tolerance, Special steel construction and a compact 50 mm length for dependable end‑dimension control; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application support. Gauge pin M323.I73 — precision test pin, 18.73 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I73 is a precision measurement pin designed for end‑dimension checks, fixture alignment and reference positioning in workshop and inspection environments. High precision 18.73 mm diameter ±0.002 mm Robust special steel workshop design Compact 50 mm length for easy handling Delivered in protective transport case Consistent dimensional control that reduces rework A small investment in a reliable reference element pays back through fewer rejected parts and shorter inspection cycles. With a declared tolerance of ±0.002 mm, this test pin provides repeatable end‑dimension checks that support statistical quality control and batch validation. The tight tolerance is particularly valuable in production lines where small deviations cause downstream assembly issues, enabling operators to identify out‑of‑spec components quickly and prevent costly rework. Durable workshop construction for everyday use Engineered as a workshop execution item, the pin combines a compact form with robust finishing for repeated use under workshop conditions. The Special steel material resists wear and preserves the functional diameter across many cycles, while the 50 mm shaft provides a balance between reach and rigidity. Its manageable mass makes handling and fixture placement straightforward, which contributes to consistent measurement results even during frequent changeovers. Easy integration with fixtures and alignment tools As a single precision pin, the component is suitable as a datum, alignment peg or go/no‑go reference in jigs and setups. The nominal 18.73 mm diameter fits into custom bushings or hardened locating holes and reduces setup time by delivering an immediately usable reference surface. Where fixture repeatability matters, the pin supports faster machine starts and more predictable assembly outcomes, translating into measurable efficiency gains on the shop floor. Protected transport and clear identification Delivered in a protective case, the pin arrives ready for safe storage and transport between workstations or the inspection bench. Each item is labelled for traceability, facilitating inventory control and preventing mix‑ups during maintenance tasks. The compact packaging also simplifies logistical handling when multiple precision elements are required across different production areas. For a reliable precision reference, contact Metav Werkzeuge in Emmerich to request the Metav IndustryLine gauge pin M323.I73 or speak with our consultants at +49 2822 7131930 / info@metav-werkzeuge.com for application advice and supply options. Technical data Article number: M323.I73 GTIN: 4061905072437 Label: Gauge pin, single, 18.73 mm, length 50 mm Facts Diameter: 18.73 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Design: Workshop execution Delivery: protective transport case Intended use: end‑dimension checks / fixture alignment FAQ What is the declared tolerance of this gauge pin? The declared tolerance for the gauge pin M323.I73 is ±0.002 mm, making it suitable for demanding dimensional checks. Is the pin suitable for fixture alignment in production jigs? Yes, the Metav IndustryLine gauge pin M323.I73 is designed for use as a datum or alignment element in fixtures and jigs. What material is used for the pin and how does that affect durability? The pin is made from Special steel, chosen for wear resistance and long service life under regular workshop use. How is the pin delivered and stored to avoid damage? The gauge pin is supplied in a protective transport case to prevent damage in transit and to simplify safe storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.74mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
The workshop-grade gauge pin combines ±0.002 mm repeatability with a 18.74 mm nominal diameter and a 50 mm length to ensure consistent end‑measurement and fit checks in serial or spot inspections; order directly via Metav Werkzeuge or consult the team for application advice. M323.I74 gauge pin by Metav IndustryLine — 18.74 mm diameter, 50 mm length The M323.I74 is a single workshop-grade gauge pin designed for precise end measurements and fit verification in production and inspection routines. Workshop-grade construction Diameter precisely 18.74 mm Length 50 mm for reach and stability Tolerance ±0.002 mm for repeatable checks Consistent accuracy for routine inspection and setup Engineered for stable, repeatable measurements in workshop environments, this gauge pin offers a tolerance of ±0.002 mm, which translates into reliable pass/fail decisions during assembly and setting operations. The tight tolerance reduces rework by providing a verifiable reference for holes and bores, while the compact 50 mm shank length balances reach and rigidity for straightforward handling. The design supports rapid comparative checks and is suitable for inline verification where reproducibility is critical. Robust material and workshop suitability for everyday use Made from special steel, the test pin resists wear and keeps gaging surfaces stable across repeated use, extending service life and reducing the frequency of replacements. The workshop execution prioritises durability and practical handling: a firm, machined finish ensures seating stability in fixtures and minimises micro‑movement during checking. For shops that require a durable reference part for set‑ups or maintenance, the construction provides a good compromise between toughness and dimensional stability. Efficient integration into inspection processes As a single, calibrated reference element with a nominal diameter of 18.74 mm and 50 mm length, the pin is straightforward to incorporate into existing jigs, test benches or handheld comparators. The compact form factor simplifies storage and transport within a production cell, while the precise diameter supports tight tolerance fits and go/no‑go assessments. Where traceable benchmark parts are required for frequent checks, this gauge pin serves as a compact, repeatable solution that complements broader metrology equipment. For reliable workshop precision and application support, contact Metav Werkzeuge in Emmerich to discuss the M323.I74 gauge pin and complementary measurement solutions via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.I74 GTIN: 4061905449420 Weight: 0.15 kg Facts Diameter: 18.74 mm Length: 50 mm Tolerance: ±0.002 mm Special features Material: Special steel Workshop execution Single test pin FAQ What is the nominal diameter and length of the pin? The pin has a nominal diameter of 18.74 mm and a length of 50 mm, designed for stable end‑measurement checks. How precise is the M323.I74 gauge pin? The M323.I74 gauge pin is specified with a tolerance of ±0.002 mm, suitable for repeatable workshop inspection tasks. Is the material suitable for heavy‑duty use? Constructed from special steel, the pin is intended for robust workshop use and maintains dimensional stability under frequent handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.75mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Benefit from the combination of high repeatability, robust special‑steel construction and a compact 50 mm length for reliable end‑dimension checks; order the Test Pin directly via Metav Werkzeuge or consult our advisors for application advice. Test Pin M323.I75 — Precision test pin, 18.75 mm Ø, 50 mm length (Metav IndustryLine) The Test Pin 18.75 mm is a workshop‑grade precision pin for end‑dimension verification and fixture alignment in production and assembly environments. Workshop‑grade special steel construction Diameter 18.75 mm for precise fit checks Length 50 mm suited to confined assemblies Tolerance ±0.002 mm for high reproducibility Repeatable checks where tolerance matters Engineered for consistent verification, the Test Pin M323.I75 combines a nominal diameter of 18.75 mm with a declared tolerance of ±0.002 mm, enabling fast go/no‑go or seating checks during incoming inspection and assembly. The fine tolerance reduces ambiguous fits and helps to avoid rework cycles, delivering measurable time savings on repetitive tasks. By converting a visual or manual trial into a quantified reference, the pin supports streamlined quality control and faster decision‑making on the shop floor. Robust workshop construction for everyday handling Constructed from special steel in a workshop‑grade design, the pin offers mechanical resistance against knocks and frequent handling while maintaining dimensional integrity. The 50 mm shank length is optimised for confined spaces and typical fixture depths, ensuring the pin seats fully without excessive protrusion. The compact mass and balanced geometry keep handling comfortable and reduce the risk of bending during routine use, which in turn preserves calibration intervals and lowers lifecycle costs for tooling. Practical integration into inspection and assembly workflows As a single test pin for end‑dimension checks, it functions well as a reference plug for alignment, seat testing and verification of bore fits. The moderate weight and compact form make storage and rapid selection straightforward in busy workstations. Where multiple diameters are used, the consistent manufacture process across the Metav IndustryLine range ensures comparable tactile feedback and interchangeability between reference pins. The clearly legible SKU and GTIN facilitate inventory control and traceability in procurement and quality records. Choose the Metav IndustryLine Test Pin for reliable end‑dimension verification — contact Metav Werkzeuge for application guidance or to request compatibility information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.I75 GTIN: 4061905449437 Label: Prüfstift, einzeln, 18,75 mm Länge 50 mm Facts Diameter: 18.75 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: Special steel Single test pin Storytrigger: end‑dimension checks FAQ What tolerance can be expected from this test pin? The Test Pin M323.I75 is manufactured with a declared tolerance of ±0.002 mm, suitable for high‑repeatability seating and fit checks. Is the pin suitable for fixture alignment and bore seating checks? Yes — the 18.75 mm diameter and 50 mm length make it well suited for fixture alignment, bore seating and end‑dimension verification in assembly processes. What material is used for the pin and how does that affect durability? The pin is made from special steel in a workshop‑grade finish, offering resistance to everyday handling and maintaining dimensional stability under normal use. Can this pin be used alongside other Metav IndustryLine reference pins? Yes — the Metav IndustryLine family is produced to consistent manufacturing standards so that pins of different diameters provide comparable handling and interchangeability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.76mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Reliable workshop-grade precision thanks to ±0.002 mm tolerance and special steel construction, combined with a compact Ø 18.76 mm / 50 mm length design and a protective transport case for safe handling — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin Ø 18.76 mm — 50 mm length (Metav IndustryLine) The gauge pin Ø 18.76 mm, 50 mm is a workshop-grade inspection pin for end-dimension verification and fixture setting in production and maintenance environments. Workshop-grade construction Diameter Ø 18.76 mm, length 50 mm High dimensional accuracy ±0.002 mm Supplied in protective transport case Consistent metrology for fast in-process checks This compact gauge pin delivers repeatable results for routine end‑dimension and fit checks. With a declared dimensional tolerance of ±0.002 mm, the pin suits tasks where small deviations matter and where fast decisions on acceptance or rework shorten cycle times. The combination of a precise diameter and a short, rigid shank reduces deflection during insertion, which supports quicker verification on assembly benches or inspection jigs. This reliability translates into fewer interruptions and a steadier production flow. Durable construction that copes with workshop demands Manufactured from special steel, the pin offers enhanced wear resistance and long service life under regular workshop use. The workshop-grade finish tolerates handling and routine contact with fixtures, minimising surface damage that could affect measurement accuracy. Supplied in a protective transport case, the component remains protected during storage and transit, reducing the risk of accidental knocks and preserving the measurement surface for longer intervals between maintenance. Practical integration and application guidance The product is delivered as a single inspection pin suitable for use in plug‑gauge checks, fixture alignment and end‑dimension control on machining or assembly tasks. Its compact form factor and modest mass make it easy to handle at the bench or in a gauge block set without specialised tooling. For specific application setups or compatibility questions, Metav IndustryLine offers technical guidance to ensure correct selection and handling for intended measurement tasks. For precise end-dimension verification with the Metav IndustryLine gauge pin, contact Metav Werkzeuge for specialist advice and reliable supply from Emmerich. Technical data SKU: M323.I76 GTIN: 4061905449444 Material: Special steel Diameter: 18.76 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.15 kg Version: Workshop-grade Packaging: Protective transport case Facts Diameter (numeric): 18.76 mm Length (numeric): 50 mm Tolerance (numeric): ±0.002 mm Weight (numeric): 0.15 kg Special features Single gauge pin delivery Robust surface finish for workshop use Protective transport case for safe handling Suitable for end-dimension verification and fixture setting FAQ What is the dimensional tolerance of this gauge pin? The Metav IndustryLine gauge pin has a specified dimensional tolerance of ±0.002 mm. Which material is used for the pin? The gauge pin (SKU M323.I76) is made from special steel, providing wear resistance suited to workshop conditions. Is a calibration certificate included with the product? The product data does not specify a calibration certificate; no ISO 17025 calibration is indicated for this item. How is the pin supplied and protected? The single pin is supplied in a protective transport case to preserve the measurement surface during storage and transit. What applications is this gauge pin best suited for? Designed for end-dimension checks, plug‑gauge verification and fixture alignment in production, maintenance and inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.77mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of precise workshop measurement with a robust single test pin that combines Ø 18.77 mm nominal diameter, tight tolerance ±0.002 mm and a solid 50 mm working length for reproducible end‑dimension checks; order directly via Metav Werkzeuge or consult Metav specialists for integration advice. M323.I77 test pin (gauge pin) – Ø 18.77 mm, 50 mm length by Metav IndustryLine A M323.I77 test pin designed for end‑dimension verification, fixture set‑up and go/no‑go checks in workshop and production inspection environments. Workshop‑grade single test pin Ø 18.77 mm nominal diameter ±0.002 mm tolerance for repeatable checks Solid 50 mm working length Delivered in a transport case Reliable inspection for everyday workshop use The M323.I77 is engineered as a workshop‑grade test pin that delivers consistent dimensional references in manual and semi‑automated inspection routines. With a nominal diameter of 18.77 mm and a declared tolerance of ±0.002 mm, the pin provides a verifiable reference for end‑dimension checks and fixture alignment. The compact 50 mm length gives sufficient engagement for stable seating while remaining easy to handle during repetitive checks. The combination of robust geometry and a precise manufacturing tolerance reduces rework and inspection time, supporting a steady production flow. How precision and material translate into dependable results Manufactured from special steel, the pin balances wear resistance with machinability, ensuring dimensional stability under typical workshop conditions. The stated tolerance corresponds to a high level of repeatability for a single plug‑type gauge, which makes the component suitable for pass/fail inspection, setting gauges and reference measurements. For users accustomed to micrometrology, this item fits between quick go/no‑go checks and more elaborate gauge procedures, offering a pragmatic compromise of accuracy and durability for everyday measurement tasks. Practical integration, handling and storage benefits The solid construction and standardised diameter facilitate straightforward use in fixture set‑ups, dedicated plug jigs or comparative checks against master gauges. The 50 mm length provides a comfortable gripping area while ensuring consistent seating in bores or against end faces. Delivery in a transport case protects the gauge during storage and transit, helping to maintain the rated tolerance and surface condition. Lightweight handling and the compact footprint support rapid changeovers on the inspection bench without adding significant tool inventory complexity. Recommended applications and workflow advantages This gauge pin is particularly suited to end‑dimension verification, assembly checks and quick reference measurements in metalworking and component assembly. Its workshop orientation makes it a practical tool for maintenance departments, small series production and quality control stations where reliable, repeatable checks are required without the overhead of specialised laboratory equipment. Where a traceable master or batch control is needed, the pin serves as a stable, low‑effort reference for everyday quality routines. Contact Metav Werkzeuge in Emmerich for tailored advice and prompt delivery of the Metav IndustryLine M323.I77 test pin, or ask our consultants for assistance integrating the pin into existing inspection workflows Technical data Article number: M323.I77 GTIN: 4061905449451 Label: Prüfstift, einzeln, 18,77 mm Länge 50 mm Manufacturer: Metav IndustryLine Category: Messstifte Facts Diameter: 18.77 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Delivered in a plastic or wooden transport case Single test pin for end‑dimension verification FAQ What applications is this test pin suited for? This M323.I77 test pin by Metav IndustryLine is intended for end‑dimension verification, fixture set‑up and pass/fail checks in workshop and production inspection contexts. How precise is the gauge and what does the tolerance mean? The pin carries a tolerance of ±0.002 mm, which indicates the maximum deviation allowed from the nominal Ø 18.77 mm; this level of precision supports repeatable reference measurements in routine quality checks. What material is used and how does it affect wear? The component is made from special steel, chosen to offer a balance of wear resistance and dimensional stability for regular workshop usage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.79mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of exact diameter control, robust special steel construction and a finely matched length for reliable positioning and repeatable inspection cycles. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for application advice. Gauge pin M323.I79 — 18.79 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I79 is a single precision test pin made for workshop metrology tasks, offering a stable reference for end‑measurements, alignment and fit checks in small to medium‑sized assemblies. Precision diameter 18.79 mm fit Tight tolerance ±0.002 mm Special steel construction 50 mm length for workshop use Repeatable fits through controlled diameter and tolerance A controlled diameter of 18.79 mm combined with a stated tolerance of ±0.002 mm ensures highly repeatable fits when checking hole diameters, locating dowel seats or verifying mating parts. The close tolerance reduces variability in assembly checks and minimises the need for rework. For routine inspection tasks, this level of accuracy provides confidence that measured clearances and interference fits reflect the component reality rather than measurement scatter. Robust alloy for everyday workshop handling Manufactured from special steel, the pin is designed to tolerate frequent use in workshop environments without rapid wear. The choice of material provides an advantageous balance between surface hardness and toughness, which benefits longevity when the pin is used in fixture setups, gauging rigs or manual verification operations. At an overall length of 50 mm and a mass of 0.15 kg, the component remains easy to handle while delivering the rigidity required for consistent contact in inspection sequences. Integrates smoothly with standard inspection procedures As a precision test pin, this component slots into existing metrology workflows — from simple go/no‑go checks to documented inspection steps in quality control. The form factor supports secure seating in gauge blocks, holders or bespoke fixtures used for end‑measurement and alignment. Because the dimensioning is exact, the pin serves as a reliable reference for process stability and for validating tooling that relies on tightly defined plug diameters. Practical care to preserve accuracy To maintain the specified ±0.002 mm performance, routine care is recommended: keep the contact surfaces clean, protect the shaft from knocks, and store the pin in a dry environment to prevent surface corrosion. Occasional inspection for wear and a controlled handling procedure will extend service life and preserve measurement integrity. Where traceable documentation is required, consult Metav Werkzeuge about available calibration options and traceability practices. For workshop precision and dependable inspection results, request the Metav IndustryLine gauge pin M323.I79 from Metav Werkzeuge — expert advice and reliable delivery from Emmerich are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.I79 GTIN: 4061905449864 Description: Gauge pin, single, 18.79 mm diameter, 50 mm length Facts Diameter: 18.79 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins (Messstifte) FAQ What is the indicated tolerance and what does it mean in practice? The stated tolerance of ±0.002 mm means the diameter of the gauge pin is held within two micrometres of the nominal 18.79 mm, providing a tight reference suitable for precision fit and inspection tasks with low variability. Can the pin be used for mounting and locating components in fixtures? Yes. The design and special steel construction make the pin suitable for locating, alignment and fixture tasks where a stable, precise plug diameter is required. Is the pin supplied as a single item or as part of a set? This entry describes a single gauge pin; the SKU M323.I79 identifies the individual component supplied on its own for bespoke or replacement use. How should the gauge pin be maintained to preserve accuracy? Keep the shaft clean and dry, avoid impacts and store in protective packaging when not in use; regular visual checks for wear are recommended to ensure ongoing measurement reliability. Which applications are typical for this type of gauge pin? Typical uses include end‑measurement checks, hole gauging, alignment of mating parts and use as a reference in manual or semi‑automatic inspection processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.7mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of high repeatability through a ±0.002 mm tolerance, robust special steel construction and practical transport packaging to keep inspection routines efficient; order directly via Metav Werkzeuge or consult our technical advisers for specification support. Gauge pin M323.I70 — 18.7 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I70 is a workshop‑grade test pin designed for reliable end‑dimension and bore checks in inspection, assembly and fixture set‑up applications. Workshop‑grade execution Diameter 18.7 mm, length 50 mm Tolerance ±0.002 mm Supplied in transport box Precision where fit and repeatability count A compact measuring pin with a declared tolerance of ±0.002 mm delivers measurable gains in quality control: the low variation drastically reduces uncertainty when verifying bore diameters or mating parts. Where interchangeability and batch consistency are required, this level of repeatability shortens inspection time and lowers the risk of rework. The design supports quick reference checks and integration into standard inspection routines, providing a rational, efficiency‑driven improvement to production control. Durable design for workshop conditions Manufactured from special steel, the pin is intended for regular shop‑floor use; the material choice balances hardness with wear resistance to maintain dimensional stability over many cycles. The workshop‑grade execution means edges and surfaces are suited to handling and fixture contact without delicate treatment, which benefits users who require a robust, low‑maintenance measuring element. Where frequent insertion and removal are part of the process, longevity of the measuring surface preserves calibration intervals and reduces total cost of ownership. Practical handling and application benefits With a 50 mm length and a precise 18.7 mm diameter, the test pin is sized for end‑dimension checks and plug‑type verification tasks in assembly or inspection fixtures. Delivery in a transport box protects the gauge during storage and transit, ensuring the measuring face remains blemish‑free until first use. Clear identification via the SKU and GTIN simplifies inventory management and traceability in a centralised tool pool, helping to keep inspection workstreams orderly and efficient. Discuss application needs with Metav Werkzeuge and secure the Metav IndustryLine gauge pin for dependable bore and end‑dimension checks — contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: M323.I70 GTIN: 4061905072406 Manufacturer: Metav IndustryLine Material: special steel Diameter: 18.7 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Facts Diameter: 18.7 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm GTIN: 4061905072406 Special features Workshop‑grade execution Supplied in transport box for transport protection Suitable for end‑dimension and bore checks Robust measuring surface for regular use FAQ What material is the test pin made from? The test pin M323.I70 is manufactured from special steel, chosen for a balance of hardness and wear resistance suitable for workshop inspection. What tolerance can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, ensuring high repeatability for dimensional checks. Is the test pin suitable for routine bore inspections on the shop floor? Yes, the workshop‑grade design and protective transport box make the measuring pin well suited to routine bore and end‑dimension inspections in production environments. How is the instrument delivered and protected? Delivery includes a transport box to protect the measuring surfaces during storage and transit; the packaging supports safe handling until the pin is first used. Which product identifiers help with traceability? Traceability is supported by SKU M323.I70 and GTIN 4061905072406, enabling straightforward inventory and procurement control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.82mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise, workshop‑ready measurement with a gauge pin that combines tight tolerance and robust construction for reliable end‑measurements; order the item directly via Metav Werkzeuge or consult our specialists for application advice. M323.I82 Gauge Pin – 18.82 mm diameter, 50 mm length (Metav IndustryLine) The M323.I82 gauge pin is a single precision inspection pin intended for end‑measurement, fixture setting and rapid go/no‑go checks in workshop and inspection environments. Precision tolerance ±0.002 mm Exact diameter 18.82 mm 50 mm length, workshop version Supplied in protective case Accuracy that secures measurement certainty This inspection pin delivers a consistent fit for end‑measurement tasks thanks to its declared tolerance of ±0.002 mm, which keeps dimensional variation within tight limits. Such accuracy reduces uncertainty when establishing reference points, so inspection routines and fixture set‑ups run with fewer adjustments and less rework. The specified 18.82 mm diameter is manufactured to an exact nominal size, making the pin suitable for rapid pass/fail checks and repeatable seating in bores, gage blocks or locating features. Emphasis on repeatability and minimal deviation underpins efficient quality control across short production runs and regular workshop checks. Durable construction designed for workshop use Manufactured in special steel, the pin is engineered for dimensional stability under frequent handling typical of a workshop environment. The 50 mm length offers sufficient engagement for many reference and seating applications while remaining compact for quick handling and insertion in fixtures. The product is supplied in a workshop version, signifying practical features for everyday use, and its modest mass (approx. 0.15 kg) supports convenient manual operation without compromising rigidity. The material choice and finish prioritise steady geometry over time, which helps maintain consistent measurement results and lowers the need for premature replacement. Practical integration into inspection workflows As a single gauge pin for end‑measurements, this tool integrates easily into fixture calibration, bore validation and assembly verification workflows. Its exact diameter simplifies the creation of reliable master references and aids rapid alignment of components during assembly or testing. Supplied in a protective case, the pin is protected during transport and storage, preserving the calibrated condition and surface quality required for accurate measurements. For workshop teams aiming to streamline inspection steps, the pin acts as a compact, low‑effort reference that complements gauges and measuring instruments in a coherent quality routine. Contact Metav Werkzeuge to confirm suitability of the M323.I82 for specific applications and to arrange prompt supply from Emmerich Technical data Article number: M323.I82 SKU: M323.I82 GTIN: 4061905449895 Dimensions & weight Diameter: 18.82 mm Length: 50 mm Weight: 0.15 kg Materials & features Material: Special steel Tolerance: ±0.002 mm Workshop version Supplied in protective case FAQ What is the declared tolerance of this gauge pin? The declared tolerance for the M323.I82 gauge pin is ±0.002 mm, ensuring tight dimensional control for end‑measurement tasks. Is the pin suitable for fixture setting and repeatable alignment? Yes, the gauge pin from Metav IndustryLine is intended for fixture setting, alignment and go/no‑go checks where precise diameter control is required. How is the item supplied and protected for transport? The M323.I82 is supplied in a protective case to safeguard the gauge pin during transport and storage. What material is used for the pin and why does it matter? The pin is made from special steel; this provides stable geometry under handling and contributes to long‑term measurement reliability. Which SKU should be referenced when ordering? Please reference SKU M323.I82 when enquiring or ordering to ensure the correct gauge pin is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com