Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
1500 N Horizontal Foot Toggle Clamp With Hook, Stainless Steel, 50mm Thread Length - Kukamet
Take advantage of stainless steel durability, a horizontal-foot design and a compact, hook-equipped form to secure fixtures reliably with up to 1,500 N clamping force; order the toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Toggle clamp 411 – stainless steel horizontal-foot clamp with hook, 1,500 N clamping force (Kukamet) A Toggle clamp 411 engineered for rapid, repeatable fastening in jigs, fixtures and assembly stations, featuring a horizontal foot and integrated hook for secure, low-profile locking. Stainless steel construction for corrosion resistance Horizontal-foot mounting for bench or fixture use 1,500 N maximum clamping force Integrated hook with 50 mm thread length Reliable clamping that keeps production moving The compact design delivers consistent clamping performance under repetitive use. With a maximum clamping force of 1,500 N and a rated holding force of 1,800 N, the device provides measurable, verifiable restraint for short-cycle assembly and test rigs. Its stainless steel build reduces the risk of material degradation in workshop environments, while the horizontal-foot format enables low-profile installation into bespoke fixtures. These technical characteristics translate into fewer interruptions on the line and a more predictable production rhythm. Quick installation and repeatable positioning for jigs Fitted with a 50 mm threaded spindle, the clamp facilitates straightforward adjustment of reach and engagement depth during setup. The relatively low weight of 0.21 kg and compact footprint make the unit suitable for dense fixture layouts where space is limited. Because adjustments are mechanical and retention is provided by the integrated hook, repeat cycles return to the same position with minimal rework. This contributes to higher throughput and reduced set-up times for medium-duty clamping tasks. Maintenance-friendly materials for long service life Constructed from stainless steel, the clamp resists common workshop contaminants and requires only basic inspection to maintain performance. The material choice and simple mechanical design reduce maintenance intervals and the need for specialised spare parts. For operations prioritising reliability and low life-cycle effort, these attributes mean lower total cost of ownership over time and predictable availability for production schedules. Where this clamp adds value on the shop floor Designed primarily for jigs, assembly stations and small fixture systems, the clamp suits applications where compact locking with a hook is needed — for example panel holding, temporary part positioning and test fixturing. The horizontal-foot mounting style enables secure anchoring to flat surfaces such as fixture plates or bench tops. Its combination of hook engagement and adjustable thread length makes it versatile for both woodworking and light fabrication tasks where fast, repeatable locking is required. For corrosion-resistant, repeatable clamping select the Kukamet Toggle clamp 411 and contact Metav Werkzeuge for tailored advice and supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S411-2 GTIN: 8680731504149 Manufacturer: Kukamet eClass: 21041718 ETIM: EC011973 Facts Weight: 0.21 kg Max clamping force: 1,500 N Max holding force: 1,800 N Thread length: 50 mm Mounting type: horizontal foot Special features Material: stainless steel Integrated hook Category: Clamps Story trigger: lever clamp FAQ What clamping and holding forces does this clamp provide? The Kukamet toggle clamp (SKU S411-2) provides a maximum clamping force of 1,500 N and a maximum holding force of 1,800 N, suitable for medium-duty fixture and assembly tasks. Is the clamp suitable for corrosive or humid workshop environments? The clamp is made from stainless steel, offering enhanced corrosion resistance for workshop and light outdoor conditions; proper cleaning extends service life. How is the clamp mounted and adjusted? Mounting is via a horizontal foot; adjustment is achieved through the 50 mm threaded spindle that sets the engagement length and locking position. What applications is this clamp intended for? Typical uses include jigs, fixture plates, assembly stations and temporary part positioning where a hook-engagement, low-profile locking solution is required. What are the physical dimensions and weight of the unit? The clamp weighs 0.21 kg and includes a 50 mm thread length for adjustment; refer to the SKU S411-2 for detailed dimensional drawings if required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Horizontal Toggle Clamp With Safety Lock, Stainless Steel, Hook 45mm Thread - Kukamet
Take advantage of a compact, corrosion‑resistant clamp that combines a stainless steel body with a mechanical safety locking mechanism and a secure hook for reliable holding; the robust holding force of 2,000 N and a clamping force of 1,500 N ensure stable fixturing. Order the Locking Toggle Clamp 351 directly via Metav Werkzeuge or ask our consultants if needed. Locking Toggle Clamp 351 — stainless‑steel latch clamp with safety lock Locking Toggle Clamp 351 is a stainless‑steel locking latch clamp designed for horizontal mounting in jigs, fixtures and production tooling where secure, repeatable holding is required. Stainless steel construction for durability Safety locking mechanism for safe retention Holding force 2,000 N for secure clamping Horizontal foot for stable mounting Integrated hook for reliable engagement Corrosion resistance and predictable holding performance Made from stainless steel, this clamp is designed to resist corrosion in workshop and light industrial environments, reducing maintenance intervals and preserving dimensional integrity over time. With a holding force 2,000 N and a clamping force 1,500 N, the device gives a quantifiable performance baseline for fixture design; these values allow engineers to calculate safety margins and select appropriate fasteners and support elements. The robust mechanical characteristics support repeatable positioning and help maintain cycle stability in automated or semi‑automated production. Safer operation through mechanical locking and secure engagement The built‑in safety locking mechanism prevents unintended release during vibration or handling, improving operator safety and process reliability. An integrated hook ensures positive engagement with the mating striker, while the horizontal foot mounting provides a low‑profile base that simplifies attachment to plates and tooling boards. Fine adjustment is enabled by the thread length 45 mm, allowing precise setting of the clamping point and compensation for wear without replacing major components. These features together reduce the risk of workpiece movement and minimise rework. Compact, lightweight design for easy integration At weight 0.175 kg, the clamp is light enough to be fitted into tight assemblies without adding significant mass, yet robust enough for demanding clamping tasks. The compact form factor facilitates use in small jigs, modular fixture systems and retrofit applications where space is limited. The combination of mechanical reliability and modest footprint supports higher throughput by enabling quicker changeovers and fewer interruptions for fixture maintenance. As a component within a clamping technology portfolio, this model balances strength, adjustability and longevity. Contact Metav Werkzeuge for a specification check or to arrange procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: S351-2-L GTIN: 8680731504736 Manufacturer: Kukamet Facts Weight: 0.175 kg Holding force: 2,000 N Clamping force: 1,500 N Thread length: 45 mm SKU: S351-2-L eClass: 21041718 ETIM: EC011973 Special features Material: stainless steel Mounting: horizontal foot Safety locking mechanism Integrated hook With hook: yes FAQ What maximum holding and clamping forces does the clamp provide? The Locking Toggle Clamp 351 delivers a holding force of 2,000 N and a clamping force of 1,500 N, values that support reliable retention in a wide range of fixture applications. Can this clamp be mounted on vertical or horizontal surfaces? The clamp is designed with a horizontal foot for stable mounting; alternative orientations require validation of load paths and mounting strength for the intended application. Is the clamp suitable for corrosive or humid workshop environments? Yes, the stainless‑steel construction of the Locking Toggle Clamp 351 improves resistance to corrosion and makes it suitable for workshop conditions where moisture is present. How is fine adjustment achieved on this model? Adjustment is provided via the threaded spindle with a thread length of 45 mm, which permits precise setting of the clamping point to accommodate component tolerances and wear compensation. What typical applications are recommended for this clamp? The clamp is intended for jigs, fixtures and small production tooling where secure, repeatable holding is required; it is particularly suited to light industrial assembly and machining setups. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Pneumatic Pushrod Clamp Horizontal Base, Zinc-Plated Cast Body, 12 mm Piston - Kukamet
Take advantage of the robust galvanised cast body combined with 3,700 N holding force and a compact 1.09 kg mass for dependable clamping in repetitive production tasks. Order the Pneumatic push‑rod clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Pneumatic Push‑rod Clamp 671 by Kukamet — 1,500 N thrust, 3,700 N holding force A versatile pneumatic push‑rod clamp, 671, designed for secure workholding in assembly lines, fixtures and automated jigs. Galvanised cast body Max holding force 3,700 N Piston diameter 12 mm Thrust force up to 1,500 N Compact design, weight 1.09 kg Consistent clamping that keeps production moving The Pneumatic push‑rod clamp 671 delivers reproducible clamping with a holding force of 3,700 N and a thrust force of 1,500 N, making it suitable for short-cycle production and fixture applications where repeatability matters. The piston diameter 12 mm balances force and stroke control, enabling precise engagement without excessive air consumption. For production planners, this combination translates into fewer rejects and steadier throughput, as the pneumatic actuation provides fast, reliable motion that integrates into pick-and-place sequences or repeated part positioning. Built to endure daily use with low maintenance Constructed with a galvanised cast body, the unit resists corrosion and mechanical wear in workshop and industrial environments, reducing maintenance intervals. The compact weight of 1.09 kg supports lightweight fixture designs while contributing to durable performance under continuous cycling. The horizontal foot mounting ensures a secure mechanical connection to frames and plates, and the robust housing protects internal components from impact and contamination, thereby extending service life and lowering running costs over multiple production campaigns. Simple integration for automated systems and fixtures Engineered for pneumatic installations, this clamp features a standard actuation style and mounting that eases mechanical and pneumatic integration into conveyors, jigs or assembly fixtures. The straightforward mechanical interface and stable clamping behaviour help to shorten setup time for tooling changes and accelerate commissioning in automated lines. The reliable actuation characteristics minimise process variability, supporting consistent part quality and a measurable improvement in operational efficiency for engineering and production teams. For specification advice and assured delivery, rely on Kukamet quality through Metav Werkzeuge — contact Metav Werkzeuge for detailed compatibility checks and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 671-3-Q12 GTIN: 8680731503166 Manufacturer: Kukamet Facts Weight: 1.09 kg Thrust force (max): 1,500 N Holding force (max): 3,700 N Piston diameter: 12 mm Special features Galvanised with cast body Horizontal foot mounting Category: Spanner eClass: 21041716 ETIM: EC011973 FAQ What clamping forces does the clamp provide? The Pneumatic push‑rod clamp 671 from Kukamet provides a holding force of 3,700 N and a thrust force up to 1,500 N (SKU 671-3-Q12). How is the clamp mounted to fixtures? The unit is supplied for horizontal foot mounting, allowing secure fixation to plates or jig frames for stable workholding. What is the unit weight and how does that affect fixture design? The clamp weighs 1.09 kg, which supports compact fixture design while maintaining mechanical stability during repeated cycles. Can this clamp be used in automated pneumatic systems? Yes, the pneumatic actuation with a 12 mm piston diameter is suitable for automated sequences and can be integrated into assembly lines and jigs where rapid, repeatable movement is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Pneumatic Push‑Rod Clamp Horizontal Base, Zinc Plated, 12 mm Piston - Kukamet
Take advantage of a compact, zinc‑plated clamp that delivers reliable, repeatable clamping: 2,960 N holding force and 1,500 N push force ensure secure fixation in automated fixtures. Order the pneumatic push‑rod clamp directly via Metav Werkzeuge or consult its specialists for integration advice. Pneumatic Push‑Rod Clamp 621 — Kukamet clamp with 1,500 N push force and Ø12 mm piston A Pneumatic Push‑Rod Clamp 621 engineered for secure, repeatable clamping in industrial jigs, assembly stations and automated fixtures Zinc-plated corrosion protection Max holding force 2,960 N Push force 1,500 N piston Ø12 mm Horizontal foot for secure mounting Consistent, measurable clamping performance for production lines The pneumatic push‑rod clamp provides a clearly defined mechanical output that supports process stability: max push force 1,500 N (pushing) and holding force 2,960 N (retention). The difference between push and holding forces is explained by the clamp’s mechanical advantage and internal geometry; the actuator produces the specified push force while the clamping geometry and contact area determine the holding capability. Delivered with a 12 mm piston diameter, the actuator is suited to medium‑force fixture tasks where repeatability and cycle speed matter. Specified values allow straightforward calculation of fixture loads and cycle requirements for machine designers and fixture engineers. Robust construction and straightforward mounting for long service life Built from zinc‑plated components, the clamp resists surface corrosion in typical workshop and production environments, reducing the need for frequent replacement. The horizontal foot mounting ensures stable attachment to subplates and tooling plates, simplifying alignment in modular fixture systems. At 1.14 kg the unit is compact enough for dense fixture layouts while remaining substantial enough for rugged use. Corrosion protection and solid mounting reduce downtime and maintenance effort, supporting continuous operation in series production or demanding jobbing environments. Integration, procurement and traceable specifications for engineering teams Technical classification and identifiers are provided for procurement and system integration: eClass 21041716, ETIM EC011973 and GTIN 8682843521601 allow clear matching in BOMs and ERP systems. The clamp is supplied under SKU 621-3-Q12, facilitating ordering and inventory management. Where control or sequencing is required, the actuator can be incorporated into pneumatic valve circuits; piston dimension and force data support valve sizing and cycle timing calculations. The product’s compact profile and measurable output make it suitable for retrofitting existing fixtures as well as new automation designs. Contact Metav Werkzeuge to discuss integrating the Kukamet pneumatic push‑rod clamp 621 into production equipment and to arrange fast delivery and technical documentation from Emmerich Technical data SKU: 621-3-Q12 GTIN: 8682843521601 Manufacturer: Kukamet Facts Max holding force: 2,960 N Max push force: 1,500 N Piston diameter: 12 mm Weight: 1.14 kg eClass: 21041716 ETIM: EC011973 Special features Material: zinc‑plated Mounting: horizontal foot Category: clamp Rapid dispatch noted in product listing FAQ What clamping forces are specified for this clamp? The Kukamet pneumatic push‑rod clamp 621 specifies a push force of 1,500 N and a holding force of 2,960 N, values suitable for medium‑force fixture applications. Is the clamp suitable for integration into automated jigs? Yes, the clamp’s compact build, 12 mm piston, and horizontal foot mounting make it suitable for automated jigs and modular fixture systems. Which identifiers help with procurement and parts management? Use SKU 621-3-Q12, GTIN 8682843521601, eClass 21041716 and ETIM EC011973 for BOM and ERP matching. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Push Rod Clamp Horizontal Foot, Zinc-Plated, 1700 N Holding Force - Kukamet
Take advantage of robust clamping power and compact installation for dependable production processes: the combination of galvanised construction, clear numerical performance data and easy mounting supports consistent results on assembly jigs and fixtures. Order the 511 push-rod clamp directly via Metav Werkzeuge or ask the consultants if further specification is required. 511 Push-rod clamp — galvanised, 1.5 kN pressing force (Kukamet) A 511 push-rod clamp designed for horizontal mounting, providing secure holding for light‑to‑medium assembly and welding tasks in workshop and production settings Galvanised construction for corrosion resistance Max. holding force 1,700 N Horizontal foot for secure mounting Compact design, 0.28 kg weight Dependable clamping performance for repeatable processes The 511 is engineered as a production‑grade push-rod clamp that converts manual actuation into a defined clamping action. With a max. pressing force of 1,500 N and a max. holding force of 1,700 N, the device supplies quantifiable restraint suitable for repeatable operations on jigs and small fixtures. The pressure spindle specified as M6x40 permits fine contact adjustment and straightforward replacement; this mechanical clarity simplifies setup decisions and reduces downtime compared with more complex systems. The clear numeric ratings enable planners and buyers to evaluate cycle‑by‑cycle performance precisely. Space-efficient mounting and simple integration into tooling The clamp’s horizontal foot mounting supports low‑profile installation where lateral clearance and predictable clamping direction are required. At 0.28 kg, the component is compact and light enough to be integrated into modular fixtures without adding significant mass, yet robust enough for repetitive use. The galvanised finish enhances corrosion resistance, which lengthens service intervals in non‑controlled environments and keeps maintenance cycles predictable. For engineers designing fixture panels, this translates into lower fixture weight, minimal rebalancing and easier handling during reconfiguration. Low-maintenance specification with workshop‑grade reliability Constructed from galvanised material and devoid of auxiliary electronics, the clamp emphasises mechanical simplicity and longevity. The absence of complex maintenance routines reduces total cost of ownership while preserving steady clamping behaviour across production runs. Specification transparency—threads, forces and mounting type—supports procurement confidence and simplifies spare‑part planning. Paired with a reliable supplier network, the unit suits small workshops and industrial buyers seeking a pragmatic balance between performance and lifecycle stability. Secure production‑grade clamping with the Kukamet 511 — contact Metav Werkzeuge for specification advice and reliable supply from Emmerich Technical Data SKU: 511-2 GTIN: 8680731504163 EClass: 21041716 ETIM: EC011973 Facts Weight: 0.28 kg Max pressing force: 1,500 N Max holding force: 1,700 N Pressure spindle: M6x40 Special features Material: galvanised Mounting: horizontal foot Special feature: none FAQ What is the maximum holding force of this clamp? The 511 push-rod clamp from Kukamet provides a maximum holding force of 1,700 N as specified for secure temporary fixation. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, intended for fixed attachment to jigs or fixture plates; the compact footprint supports low‑profile integration. Which spindle is fitted for pressure adjustment? The unit is supplied with a pressure spindle with thread M6x40, allowing precise contact adjustment and easy replacement. Is the surface finish suitable for humid workshop environments? The clamp is galvanised, offering enhanced corrosion resistance compared with untreated steel and supporting longer maintenance intervals in typical workshop conditions. Can the clamp be used in welding fixtures? Yes, the mechanical clamping action and specified forces make the 511 suitable for many light‑to‑medium welding and assembly fixtures where lateral mounting and repeatable clamping are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Base With Hook, 2000 N Holding Force - Kukamet
Take advantage of a compact clamp that combines robust clamping force, a horizontal foot for stable mounting and a quick hook closure to keep production jigs secure. Order the clamp directly via Metav Werkzeuge or consult our advisors for matching fixtures and implementation support. Toggle Latch Clamp 331 — horizontal foot, hook variant by Kukamet A Toggle Latch Clamp 331 designed for secure, repeatable fastening in fixtures and jigs where a compact, high-force closure is required for workshop and light industrial use. Horizontal foot mounting design 1,500 N maximum clamping force 2,000 N maximum holding force Blackened finish with hook attachment Reliable clamping performance for repetitive use The latch delivers a consistent clamping force that supports dependable fixation in small-series production and workshop jigs. With a rated 1,500 N clamping capacity and 2,000 N holding force, the design focuses on repeatable results and process reliability. The compact construction reduces footprint on fixtures while maintaining the mechanical advantage needed for firm closure, helping to keep cycle times stable and quality inspections consistent. The combination of measurable forces and a simple mechanical action makes this clamp suitable for production where reproducibility is essential. Quick mounting and secure engagement for efficient assembly Engineered for straightforward integration, the clamp features a horizontal foot for stable attachment and a hook closure that enables fast engagement and release in assembly operations. A thread length 45 mm allows flexible fixing options for a range of base plates and jigs, simplifying retrofitting into existing tooling. The quick-lock action supports efficient handling during set-up changes and reduces downtime between operations, contributing to leaner workflows and easier fixture management in busy workshops. Surface and handling designed for workshop conditions Finished in a blackened, burnished finish, the clamp presents a discreet appearance and a treated surface that helps to reduce glare in bright working environments. Weighing 0.16 kg, the unit is lightweight enough for manual handling yet engineered for mechanical durability in normal workshop use. The compact steel construction balances low mass with the mechanical robustness required for repeated clamping cycles, making it a practical choice for both prototype rigs and production jigs where space and weight are considerations. Practical placement in the clamping programme As a member of the clamping family, this latch is suitable for securing lids, panels and fixture components where a repeatable, measurable closure is required. The model integrates easily into common clamping layouts and complements toggle and lever clamping systems by providing a reliable closure point with controlled force. Identified as SKU B331-2 and listed under clamps, the unit is a pragmatic option for workshops seeking a straightforward, performance-focused closure without unnecessary complexity. Choose the Kukamet Toggle Latch Clamp 331 for compact, high-force clamping—contact Metav Werkzeuge in Emmerich for tailored advice and to place your order: +49 2822 7131930, info@metav-werkzeuge.com Technical Data SKU: B331-2 GTIN: 8680731508413 Manufacturer: Kukamet Facts Maximum clamping force: 1,500 N Maximum holding force: 2,000 N Thread length: 45 mm Weight: 0.16 kg Special features Horizontal foot mounting With hook Material: blackened, burnished finish Category: Clamps FAQ What clamping and holding forces are specified for this clamp? The Toggle Latch Clamp 331 (Kukamet, SKU B331-2) specifies a maximum clamping force of 1,500 N and a holding force of 2,000 N. How is the clamp mounted to a fixture? Mounting is via a horizontal foot designed for stable attachment; the thread length of 45 mm provides flexibility for different plate thicknesses and fastener choices. Is the latch suitable for frequent engagement and release? The latch is engineered for repeatable operation and quick hook engagement, making it appropriate for fixtures and jigs subject to frequent cycles. What surface finish does the clamp have and why does it matter? The clamp is supplied with a blackened, burnished finish, offering a discreet workshop appearance and a treated surface that improves handling and reduces visible wear. Which applications are typical for this clamping model? Typical uses include securing panels, lids and fixture inserts in assembly, testing rigs and small-batch production where compact, measurable closure is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Base, 50 mm Thread Length, Zinc Plated, With Hook - Kukamet
Robust galvanised construction combined with a compact 0.21 kg body provides dependable clamping and holding performance — 1,500 N clamping force and 1,800 N holding force ensure secure fixtures on production lines and jigs. Order the Kukamet 411 latch clamp directly via Metav Werkzeuge or ask our consultants for technical clarification. Kukamet 411 horizontal toggle latch clamp — galvanised, with hook Kukamet 411 is a horizontal-base toggle latch clamp designed for secure, repeatable fastening in industrial and workshop fixtures Galvanised steel for corrosion resistance Stable horizontal base for easy mounting Clamping force up to 1,500 N Holding force up to 1,800 N Consistent, measurable performance that keeps production moving Engineered for reliable engagement, this horizontal toggle clamp delivers a defined clamping force of 1,500 N and a holding force of 1,800 N, values that translate into repeatable fixture pressure and reduced rework. The difference between clamping and holding forces is important: clamping force denotes the active closing pressure applied during locking, while holding force indicates the continued resistance against vibration and external loads. For assembly and welding jigs where repeatability and predictable load capacity matter, the clamp’s rated forces provide a clear basis for fixture design and risk assessment. The galvanised finish supports long-term dimension stability in common shop environments. Space-saving installation and adjustable reach for versatile fixtures The compact construction at 0.21 kg and the horizontal base make this latch clamp suitable where space is limited or multiple clamps are clustered. The thread length 50 mm allows for adjustable latch engagement so the closure can be fine-tuned for different panel thicknesses or mating plates. A small mass reduces dynamic loads on moving assemblies and simplifies handling during fixture setup. The integrated hook secures the mating part with minimal play, making the device appropriate for repetitive indexing operations and small-batch production where quick manual actuation is required. Galvanised surface and straightforward materials choice for durability A galvanised finish provides corrosion resistance in typical workshop atmospheres and helps maintain surface appearance and function without specialised coatings. Constructed for simple robustness rather than complex maintenance, the clamp is suitable for use on steel, aluminium and similar substrates when combined with appropriate fasteners. The horizontal-foot mounting enables direct attachment to flat plates or rails, reducing the need for additional brackets. Supplied through Metav Werkzeuge’s distribution in Emmerich, the component benefits from a reliable European supply chain and clear logistical traceability. Request a technical quote or delivery schedule from Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice on the Kukamet 411 latch clamp and assured European stock supply. Technical data Article number: 411-2 GTIN: 8680731502527 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.21 kg Clamping force: 1,500 N Holding force: 1,800 N Thread length: 50 mm Special features Material: galvanised steel Fastening type: horizontal base With hook Category: spanner / clamp Brand: Kukamet FAQ What maximum forces can the clamp handle? The Kukamet 411 latch clamp is rated for a clamping force of 1,500 N and a holding force of 1,800 N, suitable for many light- to medium-duty fixture tasks. How is the clamp mounted? Mounting is via the horizontal base; the design allows direct attachment to flat plates or rails and was created to simplify positioning in jigs and fixtures. Is the finish suitable for mildly corrosive environments? Yes, the galvanised surface provides basic corrosion resistance appropriate for standard workshop conditions and indoor production areas. Can the hook be adjusted for different panel thicknesses? The device includes a 50 mm thread length for adjustment, enabling fine-tuning of engagement to match panel or plate variations. Which materials pair well with this toggle clamp? The clamp’s construction and fastening options make it compatible with steel and aluminium assemblies when used with appropriate fasteners; selection depends on the specific fixture design and load assumptions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Base, Metal Handle, Hook, 50 mm Thread Length - Kukamet
Robust stainless-steel construction and a horizontal base combine with a hooked latch and a metal handle to deliver reliable, repeatable clamping at up to 1,500 N of pressure; order the Kukamet 361 latch clamp via Metav Werkzeuge for secure fixture solutions or ask our consultants for specification support. 361 latch clamp (S361-2) by Kukamet — stainless steel, horizontal base The 361 latch clamp is a compact lever clamp designed for secure, repeatable workholding in jigs, fixtures and production benches where a horizontal mounting foot and hooked engagement are required. Stainless steel housing and hook Horizontal base for easy fixture mounting Robust metal handle for long service life 1,500 N clamping force, 1,725 N holding Dependable clamping power for consistent production results The lever-style latch offers a high clamping-to-size ratio: 1,500 N of pressing force with a holding force of 1,725 N provides stable workholding that reduces part movement during machining or assembly. This translates into fewer rejects and tighter tolerances on repeat runs, while the positive hooked engagement ensures the clamped element remains in place under vibration. The mechanical design focuses on repeatable results and predictable cycle behaviour, making the clamp suitable for medium-duty industrial applications where process reliability matters. Low-maintenance stainless-steel build for harsh environments Constructed from stainless steel with a metal handle, this clamp is specified for environments where corrosion resistance and longevity are priorities. The stainless-steel surfaces simplify cleaning and reduce the need for frequent replacement, which lowers total lifetime maintenance. For applications where exposure to coolant, humidity or occasional wash-down occurs, the material choice helps maintain functional reliability and a uniform clamping feel throughout long production cycles. Compact footprint and straightforward mounting save assembly time With a horizontal base and a slim profile, the clamp integrates easily into trolleys, modular fixtures and welded jigs without occupying excessive space. The lightweight construction (approx. 0.1 kg) minimises added mass on moving subassemblies, and the 50 mm thread provides sufficient adjustment range for varied workpiece thicknesses. These design choices simplify fixture layout and allow denser packing of clamps where several hold-down points are required, improving workflow and reducing setup iterations. Adjustable hook and lever for precise, repeatable positioning The hooked latch and threaded spindle allow fine adjustment of clamping height and pre-tension, which supports fast changeovers and consistent contact pressure across batches. The mechanism is engineered for straightforward operation and visible engagement, aiding operators during manual assembly or automated jigs. Supplied as SKU S361-2, this latch clamp suits applications that demand reliable mechanical engagement, simple maintenance and long-term dimensional stability. For procurement or technical advice on the Kukamet 361 latch clamp, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert guidance Technical Data Article number: S361-2 GTIN: 8680731509564 Manufacturer: Kukamet Category: Spanner eClass: 21041718 ETIM: EC011973 Facts Maximum pressing force: 1,500 N Maximum holding force: 1,725 N Thread length: 50 mm Weight: 0.1 kg Special features Material: stainless steel Mounting type: horizontal base Handle: metal handle With hook: yes Application type: lever/latch clamp FAQ What clamping and holding forces does this clamp provide? The Kukamet 361 latch clamp delivers a maximum pressing force of 1,500 N and a holding force of 1,725 N, providing stable fixation for medium-duty fixtures. Is the clamp suitable for use in humid or wash-down environments? Thanks to its stainless steel construction and metal handle, the 361 latch clamp resists corrosion and is appropriate for situations with moisture exposure or occasional cleaning. How is the clamp mounted and adjusted? The clamp mounts via a horizontal base and uses a threaded spindle (50 mm thread length) for height adjustment and precise engagement of the hooked latch. Can the clamp be used on moving assemblies or lightweight fixtures? Yes; at approximately 0.1 kg, the latch clamp is compact and light enough for fixtures where added mass must be minimised while retaining reliable clamping force. Which applications are typical for this latch clamp? Common uses include jigs, assembly fixtures, welding benches and inspection stations where repeatable, mechanical locking and quick manual operation are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Base, Metal Handle, Zinc Plated, With Hook, 50 mm Thread Length - Kukamet
Take advantage of the combination of robust zinc-plated construction, a horizontal base for stable mounting and a hooked lever that ensures a positive lock; compact and light, it supports clamping and holding forces up to 1,725 N for reliable fixture work. Order the clamp directly via Metav Werkzeuge or consult our advisors for application guidance. 361 latch clamp – Horizontal-foot locking clamp, zinc-plated (Kukamet) A 361 latch clamp for secure fastening in jig, fixture and general workshop applications, designed for horizontal mounting and positive engagement via a hooked lever. Zinc-plated corrosion resistance Horizontal base for stable mounting Metal handle for enhanced durability Hooked lever for positive engagement Faster set-up and consistent part retention The latch design delivers rapid engagement and release, reducing cycle times during assembly and short-run production. With a holding force of 1,725 N and a maximum pressing force of 1,500 N, the clamp provides measurable performance that supports repeatable processes. The thread length of 50 mm allows fine height adjustment of the clamping spindle, so fixtures can be aligned precisely without improvisation. This reliability translates into fewer reworks and a steadier throughput on the shop floor. Durable finish keeps downtime to a minimum A zinc-plated surface protects the clamp against corrosion in typical workshop environments, extending service life and lowering maintenance needs. The metal handle resists wear from frequent operation and preserves tactile feedback during locking and unlocking. By choosing a corrosion-resistant finish paired with robust components, the design reduces lifecycle costs and supports continuous operation in humid or mildly corrosive conditions. Space-saving design for tight fixtures Weighing just 0.1 kg, the unit is compact yet strong, making it suitable for confined jigs and modular fixture plates where mass and footprint matter. The horizontal base facilitates low-profile mounting on flat surfaces, while the hooked engagement ensures a secure lock even when clearance is limited. This compact geometry makes the clamp a practical component for retrofits and new designs where a full vertical clamp would obstruct toolpaths or access. Clear function and easy integration The simple lever mechanism provides a direct mechanical advantage: minimal operator effort achieves high clamping forces, enabling manual operation without additional actuation. The presence of a hooked lever means parts are held with positive contact, lowering the risk of slippage during machining or assembly. For designers and technicians, the clamp integrates with standard fixture hardware and permits precise spindle adjustment thanks to the threaded spindle length. Choose Kukamet quality for dependable clamping: request the 361 latch clamp via Metav Werkzeuge for prompt supply and technical advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 361-2 GTIN: 8680731504606 eCl@ss: 21041718 ETIM: EC011973 Facts Weight: 0.1 kg Maximum pressing force: 1,500 N Maximum holding force: 1,725 N Thread length: 50 mm Special features Material: zinc-plated Mounting: horizontal foot Handle: metal Engagement: hooked lever Category: clamping toggle FAQ What is the maximum holding force of this clamp? The 361 latch clamp from Kukamet provides a maximum holding force of 1,725 N, suitable for secure retention in many fixture applications. Can the clamp be mounted on horizontal surfaces? Yes, the clamp features a horizontal base intended for secure mounting on flat fixture plates and jigs. Is the handle durable for frequent operation? The metal handle design ensures long-term durability and consistent tactile feedback, reducing wear under regular use. What surface protection does the clamp have? The unit is zinc-plated, offering corrosion resistance appropriate for standard workshop environments. What adjustment range is provided for spindle height? The threaded spindle has a length of 50 mm, enabling fine height adjustment for precise clamping positions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Foot With Hook, Zinc Plated, 45 mm Thread Length - Kukamet
Reliable clamping performance with a holding force of 2,000 N and a clamping force of 1,500 N, combined with a galvanised finish and compact, lightweight construction, ensures secure, repeatable fixturing. Order the Toggle latch clamp 351 directly via Metav Werkzeuge or consult our advisers for integration support. Toggle latch clamp 351 — horizontal-base toggle clamp, galvanised (Kukamet) The Toggle latch clamp 351 is a compact locking clamp for fixture and assembly use, featuring a horizontal base and an integrated hook for fast engagement and reliable retention. Galvanised finish for corrosion resistance Horizontal base for stable mounting Holding force up to 2,000 N Compact design, only 0.175 kg Reliable clamping for repeatable processes The clamp delivers a controlled clamping force of 1,500 N and a holding force of 2,000 N, values that translate into consistent part retention across repeated cycles. These measured forces mean that the device can be relied upon where repeatability and safety are required; the distinction between clamping and holding force is important — clamping force describes the active closing pressure, while holding force indicates the maximum sustained retention under load. The robust mechanism reduces setup variation and supports stable machining, welding or assembly operations. Built to last in workshop environments Constructed from galvanised material the latch resists corrosion, extending service life in humid or industrial atmospheres. The compact component weighs just 0.175 kg, making it simple to handle during fixture assembly and reducing the load on jigs. Where space and durability matter, the combination of finish and lightweight construction keeps maintenance intervals low and inventory turnover predictable, supporting efficient production planning. Fast installation and positive engagement for productivity Designed with a horizontal base for secure mounting and an integrated hook, the clamp enables quick engagement and straightforward alignment on workholding plates. The thread length 45 mm allows for flexible adjustment during setup, accommodating a range of panel thicknesses and engagement distances. The low-profile format and simple fixing method reduce cycle time when swapping fixtures, helping to maintain throughput in busy shops. Versatile use across fixtures and assembly tasks The device suits a wide range of clamping tasks where a compact, repeatable latch is required, from small jigs to light-duty assembly fixtures. Delivered as a practical solution for secure fastening, it supports standard workshop workflows without complex assembly. The solid mechanical design ensures reliable operation, while procurement through Metav provides the additional advantage of a central European quality filter and dependable supply for production-critical components. Contact Metav Werkzeuge for technical advice and to arrange supply of the Kukamet Toggle latch clamp 351 — our team in Emmerich will advise on mounting options and delivery to the workshop Technical Data SKU: 351-2 GTIN: 8680731502466 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.175 kg Clamping force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Special features Material: galvanised Mounting: horizontal base With hook Category: clamps (spanner) FAQ What is the difference between clamping force and holding force for this clamp? Clamping force refers to the active closing pressure (1,500 N) and holding force denotes the maximum sustained retention (2,000 N) of the Toggle latch clamp 351 from Kukamet (SKU 351-2). Can the clamp be mounted on vertical surfaces? The latch is supplied with a horizontal base for stable mounting; with appropriate fixture design the Kukamet clamp can be adapted to a variety of orientations, but the standard configuration is horizontal. Is the surface treated for corrosion protection? Yes, the component is galvanised, providing corrosion resistance suitable for workshop and light industrial environments. What adjustment options are available for engagement length? The clamp features a threaded engagement with a thread length of 45 mm, allowing adjustment of the hook position to suit different panel thicknesses and engagement distances. Which applications suit this type of latch clamp? The clamp is intended for fixtures, jigs and light assembly tasks where compact, repeatable locking is required; it is particularly useful where quick engagement and reliable retention are priorities. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Verschlussspanner, senkrechter Fuß, Haken, Gewindelänge 45mm, Schwarz brüniert - Kukamet
Der Verschlussspanner B312-2 überzeugt durch seine kompakte Bauform, die Haltekraft von bis zu 2000 N und die maximale Druckkraft von 1500 N, sodass sichere Spannungen bei beengten Platzverhältnissen möglich sind. Nutzen Sie die Kombination aus robuster Oberflächenbehandlung und einfacher Befestigung für zuverlässige Werkstattabläufe. Bestellen Sie den Artikel direkt über Metav oder fragen Sie bei Bedarf die technische Beratung an. Verschlussspanner B312-2 von Kukamet Der Verschlussspanner B312-2 ist ein Hebelspanner für Montage- und Spannaufgaben mit senkrechter Fußbefestigung, ausgelegt für präzise Halte- und Druckkräfte in Werkstatt und Produktion. Verschlussspanner »B312-2« von Kukamet Haltekraft bis 2000 N für sichere Fixierung Druckkraft max. 1500 N für stabile Verriegelung Befestigung: senkrechter Fuß für einfache Montage Material: Schwarz brüniert für Korrosionsschutz Robuste Oberfläche für Langlebige Einsätze Die Schwarz brünierte Oberfläche schützt vor Korrosion und reduziert Lichtreflexionen bei Montagearbeiten. Dadurch bleibt die Funktionalität langfristig erhalten und der Wartungsaufwand wird reduziert. Für Anwender, die regelmäßige Spannvorgänge durchführen, bedeutet das weniger Nacharbeit und verlässliche Ergebnisse bei jeder Nutzung. Kompakte Bauweise und Sichere Befestigung Mit senkrechtem Fuß und einer Gewindelänge von 45 mm lässt sich der Spanner platzsparend montieren. Die Konstruktion eignet sich insbesondere für begrenzte Einbauräume, wo trotzdem eine hohe Haltekraft verlangt wird. Die einfache Montage ermöglicht schnelle Rüstzeiten und verkürzt Stillstandszeiten an der Werkbank. Leistung, Die über Betriebsanforderungen Hinausgeht Die Kombination aus Druckkraft von 1500 N und Haltekraft von 2000 N sorgt für sichere Verriegelung auch bei dynamischen Belastungen. Anwender profitieren von konstanter Klemmsicherheit, wodurch Bauteile während Bearbeitung oder Transport zuverlässig fixiert bleiben. Diese Leistungswerte sind entscheidend für Wiederholpräzision in Serienprozessen. Praktische Ausstattungsmerkmale Für Den Alltag Der Spanner verfügt über einen integrierten Haken, der das Einhaken und Sichern von Bauteilen erleichtert. Das geringe Gewicht von 0,175 kg macht Handhabung und Positionierung einfach, ohne unnötige Belastung bei wiederkehrenden Einsätzen. So bleibt die Handhabung ergonomisch und effizient. Greifen Sie zur bewährten Spannlösung von Kukamet: Der Verschlussspanner B312-2 kombiniert hohe Haltekraft mit einfacher Montage und langlebiger Oberfläche — bestellen Sie über Metav und nutzen Sie unsere technische Beratung für passgenaue Einsatzempfehlungen. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Produktmerkmale Artikelnummer: B312-2 Marke: Kukamet Bezeichnung: Verschlussspanner 312 Fakten Druckkraft max. N: 1500 Haltekraft max. N: 2000 Gewicht kg: 0.175 Gewindelänge mm: 45 Besonderheiten Befestigungsart: senkrechter Fuß Material: Schwarz brüniert Mit Haken Storytrigger: Hebelspanner Besonderheit: Keine eClass: 21041718 ETIM: EC011973 FAQ Wie hoch ist die maximale Haltekraft dieses Spanners? Die maximale Haltekraft des Verschlussspanners B312-2 von Kukamet beträgt 2000 N, sodass Bauteile auch unter Belastung sicher fixiert bleiben. Ist der Spanner für beengte Einbausituationen geeignet? Ja, der Kukamet Verschlussspanner B312-2 verfügt über eine kompakte Bauform und eine Befestigung mit senkrechtem Fuß, was die Montage in engen Bereichen erleichtert. Welche Gewindelänge muss beim Einbau berücksichtigt werden? Für den Einbau des Verschlussspanner B312-2 ist eine Gewindelänge von 45 mm relevant; diese Angabe hilft bei der Auswahl passender Schrauben und Einbaumaße. Eignet sich der Spanner für den täglichen Werkstatteinsatz? Der Verschlussspanner B312-2 ist dank der schwarz brünierten Oberfläche, des geringen Gewichts und der zuverlässigen Kräfte für wiederkehrende Spannaufgaben in Werkstatt und Produktion ausgelegt. Verfügt der Spanner über zusätzliche Befestigungsoptionen? Der Kukamet Verschlussspanner B312-2 ist mit einem Haken ausgestattet und für die Montage mit senkrechtem Fuß vorgesehen, was flexible Befestigungsvarianten ermöglicht.
1500N Clamp With Hook, Horizontal Base, Stainless Steel, 2000N Holding Force, 45mm Thread Length - Kukamet
Take advantage of the stainless-steel construction, compact horizontal-foot mounting and up to 2,000 N holding force for secure, repeatable clamping in production environments; order the Closure Toggle Clamp 351 directly via Metav Werkzeuge or ask our consultants if needed. Closure Toggle Clamp 351 – Stainless-steel latch clamp with hook (Kukamet) A Closure Toggle Clamp 351 for horizontal mounting that secures workpieces with a robust lever latch and is suitable for fixtures, jigs and assembly stations. Stainless-steel construction Horizontal-foot mounting 2000 N maximum holding force Hook-equipped lever latch Secure clamping for reliable production flow The 351 is a compact toggle clamp engineered for consistent retention and quick operation in repetitive tasks. With a rated holding force of 2,000 N and a separate clamping force specification of 1,500 N, the device delivers predictable performance for assembly and fixture work. The lever latch design converts operator motion into steady pressure, reducing rework and minimising process variation. This translates into measurable time savings where repeatability matters most. Built to last in workshop conditions Constructed from stainless steel, the latch offers corrosion resistance and mechanical resilience compared with standard plated components. The material choice supports long service intervals and lower maintenance needs in humid or mildly corrosive environments, which keeps downtimes to a minimum. The robust build ensures the clamp maintains alignment and clamping behaviour under frequent cycles, supporting lean production and quality control regimes. Quick installation and adjustment for diverse set-ups The clamp features a horizontal foot for straightforward bolting to fixture plates and tooling bases; the threaded spindle with 45 mm thread length permits fine adjustment of clamp reach and bite. The hook-equipped latch allows rapid engagement with compatible catches or plates, providing a secure closure without complex alignment. This adaptability makes the unit suitable for small-batch fixtures as well as integration into larger assembly jigs. Practical suitability across common applications Designed as a lever-operated closure, the product is ideal for holding panels, moulded parts and machined components during joining, testing or manual operations. The compact footprint supports dense fixture layouts and the repeatable action assists automated workstations where manual intervention is occasional. For projects demanding a corrosion-resistant, easy-to-adjust latch with reliable retention, this clamp offers a straightforward solution. Contact Metav Werkzeuge today to secure Kukamet’s reliable latch technology for your fixtures — Metav Werkzeuge GmbH in Emmerich provides fast delivery and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S351-2 Model: 351 GTIN: 8680731506723 Manufacturer: Kukamet Numbers / Core technical data Weight: 0.175 kg Maximum holding force: 2000 N Maximum clamping force: 1500 N Thread length: 45 mm Designs / Special features Material: stainless steel Mounting: horizontal foot Hook-equipped lever latch Lever toggle (hebelspanner) mechanism FAQ What maximum holding and clamping forces does the clamp provide? The Closure Toggle Clamp 351 is specified with a maximum holding force of 2,000 N and a maximum clamping force of 1,500 N, giving clear guidance for fixture design and load calculations. Is the clamp suitable for corrosion-prone environments? Yes, the Kukamet latch is made from stainless steel, which provides enhanced resistance to corrosion compared with standard steel finishes and is therefore suitable for many workshop and light industrial environments. How is the clamp mounted and adjusted on a fixture? The unit uses a horizontal-foot mounting arrangement and a threaded spindle with 45 mm thread length for adjustment, allowing secure bolting and fine setting of clamp engagement depth. Can the hook-equipped latch be used with custom catches? The hook design allows simple engagement with compatible catches or plates; pairing with a suitably sized catch ensures secure closure and repeatable retention. Which applications are best matched to this type of latch? This lever-operated latch is well suited to jigs, fixtures, assembly stations and testing setups where reliable, repeatable holding is required without complex actuation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Horizontal Foot Clamp With Hook, 45mm Thread Length, Zinc Plated - Kukamet
Take advantage of the combination of reliable clamping performance, compact zinc-plated durability and straightforward mounting for efficient jig and fixture setups. Order the clamp directly via Metav Werkzeuge or contact our consultants for matching mounting advice. Toggle clamp 331 — horizontal-base toggle clamp, zinc-plated (Kukamet) The Toggle clamp 331 secures workpieces using a horizontal base and a lever-action mechanism, offering a pressing force of 1,500 N and a holding capability up to 2,000 N for jigs, fixtures and light production tasks. Horizontal base for secure mounting Pressing force 1,500 N Holding force up to 2,000 N Zinc-plated corrosion protection Faster, more secure workholding for repetitive tasks The lever-style mechanism delivers a consistent and repeatable clamping motion that speeds up cycle times in assembly and fixturing. With a pressing force of 1,500 N and a holding force of 2,000 N, the clamp provides the necessary restraint for common workshop operations without complex adjustment. The toggle action converts a short handle travel into a strong clamping force, reducing operator fatigue and ensuring that tolerances are maintained across repeated operations. This reliability supports leaner workflows and fewer rechecks during multi-part assemblies. Built to resist the workshop environment while staying compact A zinc-plated finish provides basic corrosion resistance for use in standard workshop environments, making the clamp suitable for both woodworking and light metalwork applications. The compact construction and lightweight 0.16 kg design allow integration into small fixtures and portable jigs where space is limited. The horizontal base simplifies mounting on flat plates or fixture blocks, while the integrated hook offers secure engagement with mating components. These characteristics combine to give dependable service life with minimal footprint. Practical installation and clear technical fitment Installation requires a horizontal mounting surface and standard fastening through the base; the clamp features a thread length of 45 mm, which accommodates typical fixture thicknesses and adjustable linkages. The lever mechanism is straightforward to align and hooks to the mating catch without precision shims, which keeps setup time low. For specialised applications, the compact profile and robust clamping values mean the device can be specified where a repeatable, manual locking action is required in assembly, testing or holding operations. Request tailored mounting and compatibility advice from Metav Werkzeuge — our Emmerich team can confirm technical fitment and availability by email or phone Technical data SKU: 331-2 GTIN: 8680731506020 eClass: 21041718 ETIM: EC011973 Facts Weight: 0.16 kg Pressing force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Special features Material: zinc-plated Mounting: horizontal foot With hook Lever / toggle-style clamp FAQ What clamping force can be expected from this clamp? The clamp provides a pressing force of 1,500 N and a holding capability up to 2,000 N; the Toggle clamp 331 (Kukamet, SKU 331-2) is specified for these load conditions. Is the finish suitable for humid workshop conditions? The zinc-plated finish offers basic corrosion protection for standard workshop environments; for aggressive or marine conditions, consider additional surface protection beyond the clamp’s standard plating. Can the clamp be mounted to thin fixture plates? Yes. The horizontal base is designed for flat-plate mounting and the thread length of 45 mm accommodates common fixture thicknesses and linkage adjustments. Is this clamp suitable for metalworking and woodworking fixtures? The clamp’s lever action and rated forces make it suitable for both woodworking and light metalworking jigs where manual, repeatable clamping is required. What elements should be checked during installation? Check base flatness, thread engagement (45 mm available), and mating catch alignment to ensure full engagement of the hook and proper toggle lock of the mechanism. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Push Rod Clamp 12mm Piston Diam, Horizontal Foot, Zinc-Plated Cast Body - Kukamet
The combination of zinc-plated cast construction, a 1,500 N clamping capacity and a compact, low-mass design ensures secure, repeatable workholding with minimal fixture space; order the clamp directly via Metav Werkzeuge or consult the advisors for application support. 535 Pushrod clamp by Kukamet — 1,500 N clamping force, horizontal-foot The 535 is a compact pushrod clamp designed for fixture and jig workholding where a horizontal-foot mounting and reliable, repeatable clamping are required. Zinc-plated cast body for corrosion resistance 1,500 N maximum clamping force Horizontal-foot mounting for simple fixture integration Compact weight 0.63 kg for space-saving layouts Robust clamping that keeps production moving The unit combines a zinc-plated exterior with a cast body to resist workshop wear while maintaining stable contact pressure. With a 1,500 N maximum clamping force and a 1,700 N holding force the device secures workpieces reliably during machining and assembly. The internal 12 mm piston converts lever action into linear force with minimal backlash, providing consistently repeatable positioning in batch production or single-item fixturing. These mechanical characteristics translate into fewer reworks and a steadier process flow. Easy integration into existing fixtures and jigs Designed with a horizontal foot for mounting, the clamp fits standard fixture plates and tooling setups without complex adapters. The clamping spindle is specified as an M8x50 spindle, allowing rapid replacement or adjustment within the fixture. At 0.63 kg the component adds minimal mass to movable subassemblies, which benefits automated handling and reduces inertial load on indexers. The simple pushrod principle of this clamp supports rapid cycle times and straightforward maintenance, making it suitable for repetitive assembly and light machining operations. Durable, practical choice for everyday workshop use Manufactured by Kukamet, the unit is engineered for long service life under workshop conditions. The combination of a sturdy cast housing and corrosion-resistant finish reduces downtime for replacement, while the compact form factor supports dense fixture layouts in tool rooms and production cells. The SKU: 535-3-Q12-L identifies this configuration for procurement and spare-part planning. For customers seeking a reliable mechanical clamp that balances holding power and footprint, this clamp represents a pragmatic solution that minimises complexity in fixture design. Speak with Metav Werkzeuge for tailored advice on fitting the Kukamet 535 into production fixtures — email info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance. Technical data SKU: 535-3-Q12-L GTIN: 8682843521229 ECLASS: 21041716 ETIM: EC011973 Core data Maximum clamping force: 1,500 N Maximum holding force: 1,700 N Piston diameter: 12 mm Spindle thread/length: M8x50 Weight: 0.63 kg Special features Material: zinc-plated with cast body Mounting: horizontal foot Application type: pushrod / lever clamp FAQ What is the maximum clamping force of this clamp? The Kukamet 535 pushrod clamp delivers a maximum clamping force of 1,500 N and a holding force of 1,700 N. Which mounting style does the clamp use? The unit features a horizontal-foot mounting designed for direct attachment to fixture plates and jig bases. What spindle and piston dimensions are specified? The clamp uses an M8x50 spindle and a 12 mm piston diameter for reliable force transmission. Is the clamp suitable for frequent use in a production environment? Yes, the Kukamet 535 is built with a zinc-plated cast body for durability and a compact form that supports repeated cycles in production settings. How can the SKU be used for ordering or spare parts? Reference SKU: 535-3-Q12-L when ordering the exact configuration or when planning replacement components. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Toggle Clamp Horizontal Foot With Hook, Stainless Steel, 1725N Holding Force - Kukamet
Take advantage of a compact, corrosion-resistant latch that combines reliable holding performance with simple horizontal mounting for fast fixture integration. Order directly via Metav Werkzeuge or ask their consultants for specification support. Latch clamp 363 – stainless steel toggle latch with hook, horizontal foot mounting by Kukamet The Latch clamp 363 is a stainless steel toggle latch designed for secure, repeatable fastening in jigs, fixtures and assembly applications where a horizontal-foot mount and positive-hook engagement are required Stainless steel construction Horizontal foot mounting Built-in hook for positive engagement Holding force up to 1,725 N Robust material and corrosion resistance for demanding environments Made from stainless steel, this toggle latch delivers long-term resistance to corrosion and wear, reducing maintenance intervals and downtime. The metal construction ensures consistent clamping behaviour under frequent cycling, while the compact design keeps the footprint minimal. A corrosion-resistant finish supports use in workshop and light industrial environments, providing a reliable fastening point where repeatability is essential. The combination of material and build quality yields a durable clamp that maintains alignment and preload over many cycles. Clear mechanical performance for precise fixture design The latch offers distinct mechanical values: a pressing force rated at 1,500 N and a holding force of 1,725 N, which allows engineers to dimension jigs and assemblies with confidence. The difference between pressing and holding forces should be considered when designing closures: the pressing value indicates achievable closure power, while the holding value expresses static retention under load. The integrated hook secures the mating plate positively, preventing unintended release and ensuring safe operation in automated or manual production processes. Fast mounting and compact operation to streamline workflows A horizontal-foot mounting plate enables straightforward installation on flat surfaces or fixture bases, simplifying retrofits and new equipment builds. At approximately 0.05 kg, the clamp is lightweight yet robust, making it suitable for portable fixtures and movable fixtures inside production cells. The latch mechanism operates with simple lever action for quick open/close cycles, supporting efficient takt times on assembly lines. Specifying a compact toggle latch like this reduces spatial requirements while maintaining secure closure, which benefits lean manufacturing and dense tooling layouts. For procurement or application advice on Kukamet stainless-steel latch clamps, contact Metav Werkzeuge for direct ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s specialists will assist with compatibility and integration into existing fixtures Technical data SKU: S363-2 GTIN: 8680731509588 Brand: Kukamet eClass: 21041718 ETIM: EC011973 Core specifications Max pressing force: 1,500 N Max holding force: 1,725 N Weight: 0.05 kg Design & features Material: stainless steel Mounting: horizontal foot With hook Product type: latch clamp (toggle latch) FAQ What material is used for this latch clamp and how does that affect corrosion resistance? The latch clamp 363 is manufactured from stainless steel, which provides enhanced resistance to corrosion and a longer service life in humid or mildly aggressive workshop atmospheres. What are the rated forces and how should they be used in fixture design? Rated values are 1,500 N pressing force and 1,725 N holding force; use the pressing force to assess closure capability and the holding force to determine static retention under load. How is the clamp mounted and where is it most suitable to be installed? The clamp uses a horizontal foot mounting, making it suitable for installation on flat fixture bases, jigs and assembly plates where a low-profile latch is required. Does the latch include a positive locking feature? Yes, the integrated hook ensures positive engagement when closed, improving safety and preventing unintended release during handling or vibration. Is the latch suitable for portable or lightweight fixtures? At approximately 0.05 kg the latch is lightweight and well suited to portable fixtures or applications where low mass is desirable without compromising holding performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Vertical Base Latch Clamp With Hook, 45mm Thread Length, 0.16kg - Kukamet
Take advantage of the combination of robust holding performance, a compact and lightweight design, and straightforward vertical-foot installation for reliable fixture clamping. Order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Latch clamp 332 — vertical-foot toggle latch clamp with hook by Kukamet The Latch clamp 332 is a compact vertical-foot toggle latch clamp intended for secure fastening in jigs, fixtures and access panels across metalworking and general workshop applications. Vertical foot for flush mounting Holding force up to 2,000 N Compact and lightweight at 160 g Blackened finish for corrosion resistance High-performance holding for demanding fixtures The clamp delivers a holding force of up to 2,000 N combined with a clamping force rated at 1,500 N, providing measurable reliability where repeatable retention is required. These figures translate into consistent clamp behaviour under cyclical loads, reducing rework and downtime in production environments. The specified forces are useful reference values when replacing or specifying clamps for pallets, jigs or enclosure doors, and they support rational decision-making when selecting hardware for load-critical fixtures. Durable construction with corrosion-resistant finish Constructed with a blackened finish, the component offers enhanced surface protection while maintaining a discreet appearance in industrial settings. The integral hook and a threaded engagement of 45 mm length enable secure latch engagement and straightforward adjustment. At just 0.16 kg, the assembly adds minimal mass to moving fixtures, which benefits indexing systems and portable tooling where low inertia is preferred. The materials and surface treatment together balance durability with the ease of retrofitting into existing assemblies. Easy integration and service-friendly adjustment Designed for mounting on a vertical foot, the clamp allows flush installation on panels and plates, saving space on workbenches and fixture bases. The lever-style actuation provides quick manual operation with clear tactile feedback, while the threaded section permits fine preload adjustment without specialised tools. Routine checks are limited to visual inspection and re-tensioning if required, keeping maintenance intervals short and predictable — an advantage for busy workshop schedules and lean production lines. Proven partner for consistent supply and support Specified by professionals in clamping technology, this latch clamp is suitable for small-batch fixtures as well as larger assembly lines where dependable repeatability matters. Sourcing through an experienced distributor ensures traceability and continuity of supply; Metav’s position as a precision partner combines extensive product range with a quality filter for the European market. The result is predictable availability alongside the technical data needed to integrate the clamp into engineering documentation. For secure fixture assembly choose Kukamet quality — contact Metav Werkzeuge for tailored advice and reliable supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B332-2 GTIN: 8680731508468 eClass: 21041718 ETIM: EC011973 Core specifications Clamping force: 1,500 N Holding force: 2,000 N Weight: 0.16 kg Thread length: 45 mm Features & materials Vertical foot mounting With hook Blackened finish Category: Clamps SKU: B332-2 FAQ What maximum load can the clamp sustain? The clamp offers a holding force of up to 2,000 N and a clamping force of 1,500 N, figures that indicate suitability for most fixture retention tasks with moderate dynamic loads. Is the clamp suitable for outdoor or humid environments? The blackened finish provides improved surface protection; however, for prolonged outdoor exposure additional corrosion protection may be recommended depending on the specific environmental conditions. How is the clamp mounted and adjusted? Mounting is performed via the vertical foot and adjustment is achieved through the 45 mm threaded engagement, allowing precise preload setting without special tools. Can the latch be used on portable fixtures or jigs? Yes — the lightweight construction at approximately 0.16 kg and compact footprint make it well suited to portable fixtures and moveable tooling where low mass is important. Which SKU and manufacturer reference should be quoted when ordering? Please refer to SKU B332-2 from Kukamet when ordering or enquiring about this toggle latch clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Vertical Base Toggle Clamp With Safety Lock, 45mm Thread Length, Stainless Steel - Kukamet
Compact stainless construction, secure hook closure and a positive safety lock give reliable fixture performance up to 2000 N holding force; lightweight design eases integration into existing jigs. Use the robust latch for repetitive clamping tasks and order directly via Metav Werkzeuge or consult our specialists for tailored advice. Latch clamp 312 (S312-2-L) – stainless steel latch clamp with safety lock by Kukamet Latch clamp 312 offers a compact locking closure for vertical-foot mounting, combining corrosion-resistant construction with a hook closure and integrated safety locking for repeatable clamping. Stainless steel construction Vertical-foot mounting Integrated safety locking mechanism Hook-equipped for secure closure Corrosion-resistant durability that fits tight spaces Made from stainless steel, this compact closure delivers corrosion resistance and consistent performance in workshop environments. The light overall mass of 0.175 kg reduces the load on fixtures while keeping the component simple to handle during assembly. Because the housing resists common workshop contaminants, service intervals are reduced and long-term reliability is improved. The combination of a robust material and compact footprint supports compact jig design without sacrificing durability. High holding and pressing forces for dependable clamping Designed for demanding repetitive operations, the device provides a pressing force of 1500 N and a holding force of 2000 N, giving a clear safety margin between actuation load and static retention. This separation of values allows secure closure under vibration and machining loads while keeping actuation effort manageable. The mechanical behaviour ensures repeatable positioning and reliable part retention, which translates into fewer stoppages and more consistent production output. Easy mounting and secure operation for everyday workflows The vertical-foot design enables straightforward installation on flat fixture plates and tooling blocks; the thread length 45 mm permits fine height adjustment for precise part alignment. A hook-equipped closure point ensures a positive engagement; the integrated safety lock prevents accidental release during handling or machining operations. The compact lever action makes manual operation quick, while the locking feature supports safe transport and handling of clamped assemblies. Why this latch supports efficient sourcing and long-term supply As part of Kukamet’s range, the unit is engineered for industrial use and built to integrate with standard tooling. Sourcing via Metav Werkzeuge brings the added assurance of an experienced European distribution partner: a wide product range, structured quality checks at the Emmerich hub and a proven delivery process that supports ongoing production needs. This supply chain transparency reduces procurement risk and helps maintain uninterrupted workshop throughput. Contact Metav Werkzeuge for expert advice on integrating the Kukamet latch clamp S312-2-L with safety lock into existing jigs and fixtures, or to request compatibility information for specific applications Technical data SKU: S312-2-L GTIN: 8680731509403 Brand: Kukamet Material: Stainless steel Category: Spanner Facts Weight: 0.175 kg Pressing force (max): 1500 N Holding force (max): 2000 N Thread length: 45 mm Special features Vertical-foot mounting Integrated safety lock Hook-equipped closure Lever-type latch action Compact, corrosion-resistant design FAQ What materials is this latch best suited for? The Kukamet latch clamp S312-2-L is manufactured from stainless steel and is suitable as a fixture element in general workshop and industrial environments where corrosion resistance and mechanical durability are required. What holding and actuation forces can be expected? The latch provides a pressing force of 1500 N and a holding force of 2000 N, giving secure retention for a wide range of repetitive clamping tasks. How is the device mounted and adjusted? Mounting is via the vertical foot; the device features a threaded spindle with a 45 mm thread length for height adjustment and accurate positioning on fixture plates. Does the clamp include safety features to prevent accidental opening? Yes, the S312-2-L includes an integrated safety locking mechanism and a hook closure to reduce the risk of accidental release during handling or machining. What are the identifying details for ordering and stock checks? Ordering reference: SKU S312-2-L; GTIN 8680731509403; product type: Kukamet latch clamp 312 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Vertical Clamp With 5000N Holding Arm, Safety Lock, 100° Angle - Kukamet
Take advantage of the robust 5,000 N holding arm, the integrated safety lock and a compact horizontal foot for stable mounting — a combination that secures workpieces reliably while keeping setup time short. Order directly via Metav Werkzeuge or contact our advisors for fixture planning and integration advice. Vertical toggle clamp 221 by Kukamet — 5,000 N holding arm, 1,500 N clamping force The Vertical toggle clamp 221 is a compact vertical clamping solution designed for fixtures and jigs where high holding force and secure locking are essential for repeatable production. Robust holding arm with 5,000 N force Integrated safety lock for secure clamping Horizontal foot for stable mounting Clamping force up to 1,500 N Consistent clamping for reliable production The clamp delivers high holding performance through a dedicated holding arm rated at 5,000 N, combined with a maximum clamping force of 1,500 N, which reduces the risk of workpiece movement during machining or assembly. The integrated safety lock prevents unintended release of the lever, lowering the likelihood of set-up errors and scrap. These measured performance values translate directly into fewer interruptions on the shop floor and improved process reliability for small-batch and medium-volume workflows. Compact integration reduces setup time Designed with a horizontal foot for simple installation, the device fits into standard fixture plates and modular jigs without demanding additional mounting complexity. The body features a black oxide finish that gives basic corrosion resistance while maintaining a low visual impact in production cells. With a compact mass of 1.31 kg and a working angle of 100°, the clamp allows close-packed arrangements on pallets and reduces interference with neighbouring tools, enhancing layout flexibility and faster changeovers. Suitable for diverse fixtures and practical workbenches This toggle-style clamp is engineered for workshops, subassembly lines and engineering labs that require dependable vertical clamping in a modest footprint. The lever mechanism, inspired by classic toggle clamps, ensures positive force transmission and simple manual operation, helping operators position and secure parts swiftly. Sourcing through Metav Werkzeuge gives access to consistent stock levels and technical advice from a partner experienced in supplying precision tools and fixture elements for industry and trade. Contact Metav Werkzeuge today to discuss fixture compatibility, request the SKU 221-4-C-L for order processing or obtain tailored advice by phone or e‑mail: +49 2822 7131930 / info@metav-werkzeuge.com Technical data Article number: 221-4-C-L GTIN: 8682843520390 EClass: 21041717 ETIM: EC011973 Facts Clamping force: 1,500 N Holding force: 5,000 N Weight: 1.31 kg Working angle: 100° Special features Mounting type: horizontal foot Safety lock: integrated Finish: black oxide Product type: vertical toggle clamp FAQ What is the maximum holding force of this clamp? The clamp offers a holding arm rated at 5,000 N and a clamping force up to 1,500 N for secure fixation. Is the safety lock suitable for automated cells? The integrated safety lock on the Vertical toggle clamp 221 secures the lever mechanically; for full automation, assess integration with safeguarding and control systems. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot; the design allows bolting to standard fixture plates and modular bases for stable installation. What finish does the device have and how does it perform in shop environments? The clamp comes with a black oxide finish that offers basic corrosion protection and a discreet appearance suited to workshop use. Which SKU should be referenced when ordering or requesting data sheets? Use SKU 221-4-C-L for ordering, stock checks and when requesting detailed documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Vertical Foot Clamping Toggle Clamp With Safety Latch, Black Oxide Finish - Kukamet
Compact, safe clamping with measurable performance: the combination of a 2,000 N holding force, a 1,500 N clamping capacity and a secure safety lock makes this latch clamp a dependable choice for repetitive fixtures and jigs. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. Kukamet B312-2-L Toggle Latch Clamp 312 — Vertical Foot, Safety Lock Toggle Latch Clamp 312 (B312-2-L) is a compact industrial latch clamp for fast, repeatable securing in fixtures, jigs and small assembly stations. Vertical-foot mounting for stable installation Safety lock for secure clamping Holding force up to 2,000 N Blackened finish for corrosion resistance Maintain consistent production with reliable clamping power The latch provides a measurable combination of clamping and holding performance, delivering a clamping force of 1,500 N and a holding force up to 2,000 N for demanding repeat operations. These figures enable predictable fixture behaviour and reduce setup variation, which supports throughput and lower rework rates. The mechanical design translates force efficiently, meaning less operator effort during closing and a consistent result across cycles. Safer, faster operation thanks to an integrated safety mechanism An integrated safety lock prevents accidental release during processing, adding a layer of protection for both workpieces and operators. The vertical-foot mounting ensures the clamp remains rigid under load, improving positional stability in welded or bolted jig assemblies. The latch action is quick to engage and release, improving cycle times while keeping handling straightforward for workshop staff. Space-saving mounting and simple integration into fixtures With a compact mass of 0.175 kg and a thread length of 45 mm, the clamp fits tight installation envelopes and adapts to common fixture plates and frames. The built-in hook simplifies latching onto mating parts or anchors and supports versatile alignment options. Its low profile reduces interference with adjacent tooling and helps maintain clear access for assembly or measurement tasks. Durable finish and construction for workshop environments Finished in a blackened treatment, the clamp resists surface wear and offers improved corrosion protection in everyday industrial atmospheres. The robust mechanical components are designed for repetitive cycles, making this latch suitable for production lines, welding fixtures and general-purpose jigs. Where longevity and predictable performance are priorities, this clamp provides a practical, low-maintenance solution. Contact Metav Werkzeuge to specify the Kukamet B312-2-L for production fixtures; our Emmerich-based team will advise on fitment and supply options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B312-2-L GTIN: 8680731508338 Manufacturer: Kukamet SKU: B312-2-L Facts Weight: 0.175 kg Clamping force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Eclass: 21041718 ETIM: EC011973 Special features Vertical-foot mounting Safety lock Blackened finish With hook Category: Spanner FAQ What applications is this latch clamp suited for? The Kukamet B312-2-L toggle latch clamp is suitable for fixtures, jigs and small assembly stations where repeatable clamping and fast actuation are required. How much load can the latch withstand during holding? Rated holding force for the product is 2,000 N, providing secure retention for typical workshop and light industrial applications. Does the clamp include any anti-release feature? Yes — the clamp comes with an integrated safety lock to prevent unintended opening under load. What mounting style does the clamp use? This model uses a vertical foot mounting arrangement, offering a stable base for bolted or welded fixture installation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Vertical Toggle Clamp With Safety Lock, Zinc Plated, Hook Model, 45mm Thread Length - Kukamet
Galvanised construction paired with a secure safety lock and a compact vertical-foot mounting delivers dependable clamping and fast fixture cycles; the robust holding capacity of 2,000 N and closing force of 1,500 N ensure reliable retention in demanding applications. Order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Latch clamp 312 – Vertical-foot hook latch clamp with safety lock by Kukamet A Latch clamp 312 designed for fast, secure closing in fixtures, jigs and transport applications, featuring a vertical foot and integrated safety locking mechanism. Vertical-foot mounting for compact installation Galvanised finish for corrosion resistance Integrated safety lock prevents accidental release Holding force up to 2,000 N and 1,500 N closing force Faster clamping cycles with industrial reliability The design focuses on repeatable, time-saving operation for production and assembly environments. The compact vertical base allows the clamp to be mounted in confined setups while the galvanised surface provides corrosion resistance for longer service life. With a closing force of 1,500 N and a holding force of 2,000 N, the component secures workpieces reliably during machining or transport, reducing rework and downtime. The mechanism is intended to integrate into fixtures where quick engagement and a secure lock are essential. Low wear, easy mechanical integration A purpose-built hook and threaded connection simplify alignment and fastening while reducing wear across cycles. The thread length 45 mm offers secure adjustment when paired with standard fixtures, and the lightweight construction at 0.175 kg minimises added mass to moving assemblies. The galvanised material finish both protects surfaces and supports maintenance regimes by reducing the need for frequent replacements. This model is especially suitable where compact, durable clamps are required for repetitive processes. Safety-first design that supports industrial workflows The built-in safety lock prevents accidental opening under vibration or unexpected loads, improving operator safety and process reliability. The clamp’s compact footprint and robust holding figures make it suitable for use in tooling, transport latches and quick-change fixtures. Supplied by Kukamet and distributed via Metav Werkzeuge, the component benefits from a quality-assured supply chain that supports consistent availability and straightforward integration into workshop inventories. Contact Metav Werkzeuge to confirm compatibility for fixture designs or to arrange supply of the Kukamet latch clamp 312 from Emmerich stock. Technical Data Article number: 312-2-L GTIN: 8680731502350 ECLASS: 21041718 ETIM: EC011973 Facts Closing force (max): 1,500 N Holding force (max): 2,000 N Thread length: 45 mm Weight: 0.175 kg Special features Material: galvanised Mounting: vertical foot With hook With safety lock Manufacturer: Kukamet FAQ What maximum holding capacity does this clamp provide? The Kukamet latch clamp 312 provides a holding force of up to 2,000 N and a closing force of 1,500 N for secure retention in fixture and transport applications. Is the clamp suitable for outdoor or humid environments? The galvanised finish on the latch clamp 312 increases resistance to corrosion, making it more suitable for humid environments than untreated steel components. How is the clamp mounted? Mounting is via a vertical foot that enables compact installation in jigs and fixtures; the part is supplied with a hook and a 45 mm thread length for secure mechanical connection. Does the latch include a safety mechanism? Yes, the model features an integrated safety lock designed to prevent accidental opening under vibration or external forces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Closure Clamp 6848H Horizontal With Counterholder, 1600N Holding Force - AMF
Take advantage of a compact, horizontal locking solution that combines a high holding force and an adjustable clamping range for secure, repeatable fixturing; order directly through Metav Werkzeuge or request tailored advice from our consultants. AMF Closure clamp No. 6848H (horizontal) — Size 2, 1,600 N holding force The Closure clamp No. 6848H is a horizontal locking latch designed for fixtures and jigs, supplied complete with a counter holder for reliable clamping in production and assembly applications. Horizontal locking clamp, size 2 Max holding force 1,600 N Adjustable clamping range 42–76 mm Supplied with counter holder Secure, repeatable holding for production use A robust horizontal locking solution delivers consistent clamping across repetitive operations. With a holding force of 1,600 N and an adjustable clamping range of 42–76 mm, this clamp secures parts reliably without frequent readjustment. The mechanical design translates applied force into stable contact pressure, reducing the risk of part movement during machining, assembly or testing. For jigs and fixture systems where repeatability matters, the clamp’s predictable performance contributes directly to process stability and fewer rejects. Fast setup and flexible adjustment reduce cycle times The horizontal configuration and supplied counter holder simplify installation and alignment on fixture plates. The latch features an adjustable reach (L1 125–159 mm) and a stroke adjustment range (M 19.5–23.5 mm), enabling quick adaptation to different workpiece heights and tolerances. These characteristics support faster changeovers and fewer stoppages: the mechanical adjustments are intuitive and minimise downtime, helping to increase throughput on small-batch and large-scale production alike. Made for industrial workshop conditions Designed for demanding shop-floor environments, the clamp’s compact geometry and horizontal design allow close packing on fixture plates and robust engagement under load. The closure latch is suitable for use in assembly, welding fixtures and packaging jigs where secure locking is essential. The concept focuses on longevity and operational reliability: a simple, service-friendly mechanism reduces maintenance intervals while maintaining consistent clamping performance throughout repetitive cycles. Clear installation guidance and maintenance-friendly design Mounting and adjustment options are straightforward, with defined datum dimensions and a clear clamping envelope that aids in fixture planning. The latch can be integrated into modular tooling systems using the specified dimensional data for confident placement. Routine inspection is limited to fastener torque checks and visual wear assessment, keeping lifecycle maintenance simple. For additional technical data or application-specific recommendations, Metav Werkzeuge provides specialist advice to match the clamp to the required fixturing task. Contact Metav Werkzeuge for tailored application advice on the AMF horizontal closure clamp No. 6848H — ensure the right configuration for dependable fixturing; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4123682200NW Model: 6848H Label: Closure clamp No. 6848H, Size 2, horizontal, AMF Execution: horizontal; including counter holder Packaging unit: 1 Facts Size: 2 Holding force max: 1,600 N B min: 42 mm B max: 76 mm C: 13 mm D: 5.2 mm D1: 4 mm E min: 38 mm E max: 72 mm F: 11 mm H: 12 mm H1: 47 mm H2: 99 mm K: 6.4 mm L1: 125–159 mm L5: 69 mm M: 19.5–23.5 mm N: 38 mm P: 26 mm Special features Horizontal locking design Supplied with counter holder AMF brand Adjustable clamping range 42–76 mm L1 adjustable 125–159 mm FAQ What is the maximum holding force of this clamp? The AMF Closure clamp No. 6848H provides a maximum holding force of 1,600 N, suitable for many light to medium duty fixturing tasks. Which clamping range does the latch cover? The locking latch covers an adjustable clamping range of 42–76 mm, with L1 reach adjustable from 125 to 159 mm to suit various part heights. Is the counter holder included with the clamp? Yes, the delivery includes a counter holder; the Closure clamp No. 6848H arrives ready for mounting with the paired counter element to ensure secure engagement. Can this clamp be used in welding fixtures and assembly jigs? The horizontal design and stable locking action of the AMF No. 6848H make it well suited for welding fixtures and assembly jigs where repeatable, secure clamping is required. What information is helpful for mounting on a fixture plate? Refer to the dimensional facts (B, C, H, L1, M etc.) for fixture planning; the SKU 4123682200NW identifies the exact configuration of this AMF horizontal closure clamp. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Closure Clamp 6848H Horizontal With Counterholder, 7000 N Holding Force - AMF
Benefit from a compact, robust solution that combines a 7,000 N holding force with a horizontal mounting and an integrated counterholder for secure, repeatable clamping. Order the clamp directly via Metav Werkzeuge or consult their advisors for application-specific guidance. AMF 6848H horizontal toggle clamp, size 4 — 7,000 N holding force The AMF 6848H horizontal toggle clamp, size 4 is a sturdy workholding device designed for jigs, fixtures and repetitive assembly tasks that demand reliable clamping and fast part changeover. Horizontal configuration with counterholder included 7,000 N maximum holding force Adjustable clamping range 66–130 mm Robust industrial design, size 4 Secure, repeatable clamping for production use The horizontal toggle clamp delivers a high clamping capacity with a maximum holding force of 7,000 N, making it suitable for demanding fixture applications where consistent pressure and retention are essential. The integrated counterholder removes the need for separate support components, simplifying fixture layout and reducing part count. In practice, this translates to fewer setup errors and a stable clamp that maintains position under cyclic loads, improving process stability on the assembly line. Easy integration thanks to defined adjustment ranges Designed for straightforward installation, the unit offers an adjustable clamping range (66–130 mm) that covers common workpiece thicknesses. Key installation dimensions such as L1: 209–273 mm and M: 35.0–46.0 mm enable precise alignment within fixtures and jigs; these measurable values support rapid CAD integration and accurate positioning during fixture design. The horizontal orientation permits low-profile mounting on plates or frames, while the clearly stated dimensions facilitate reliable repeatability between setups. Built for industrial workflows and efficient operations As a dedicated workholding component, the clamp supports faster cycle times and predictable clamping behaviour, which helps to reduce rework and downtime on production lines. The size 4 designation denotes an industrial-grade variant intended for medium-duty to heavy-duty applications where repeatability and mechanical robustness matter. With a single packaging unit and a compact footprint, the device is easy to stock and replace, supporting continuity in small-batch and series production alike. For tailored advice and rapid supply of AMF horizontal toggle clamps with a 7,000 N holding force, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 4123682400NW Type: 6848H Product name: AMF horizontal toggle clamp, size 4 Configuration: horizontal, includes counterholder Packaging unit: 1 Facts Holding force: 7,000 N Size: 4 B min: 66 mm B max: 130 mm C: 32 mm D: 8.5 mm D1: 8 mm E min: 59 mm E max: 123 mm F: 19 mm H: 26 mm H1: 94.5 mm H2: 171.5 mm K: 9.5 mm L1: 209–273 mm L5: 111 mm M: 35.0–46.0 mm N: 64.3 mm P: 53.5 mm Special features Horizontal mounting Counterholder included Size 4 designation Suitable for industrial fixtures Robust holding capacity FAQ What is the maximum holding force of this clamp? The AMF 6848H horizontal toggle clamp provides a maximum holding force of 7,000 N (SKU 4123682400NW), suitable for medium-duty to heavy-duty fixturing. What clamping range does the device cover? The unit features an adjustable clamping span from 66 to 130 mm, allowing accommodation of a wide range of workpiece thicknesses. Is a counterholder included and is the clamp for horizontal mounting? Yes, the clamp is supplied in a horizontal configuration and includes a counterholder to simplify fixture assembly and ensure secure engagement. Which dimensions should be checked for integration into a jig? Relevant dimensions include L1: 209–273 mm, H1: 94.5 mm, H2: 171.5 mm and the clamping range B: 66–130 mm; these values are specified for precise positioning during fixture design. What applications suit this type of clamp? The clamp is well suited to jigs, fixtures and production tooling where repeatable, secure clamping is required, for example in assembly, welding or machining fixtures using standard clamping stations. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Closure Clamp 6848V Vertical With Counterholder, 3 Size Range 34.5–64mm, 3200N - AMF
Take advantage of a high holding force of 3200 N, compact vertical design and an adjustable clamping range for secure, repeatable fixtures in production. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Toggle clamp No. 6848V, Size 3 (vertical) – AMF | vertical toggle clamp, 3200 N hold The Toggle clamp No. 6848V (vertical) is a compact industrial closure clamp for fixtures and jigs, supplied with a counter-holder and designed for vertical clamping tasks in assembly and machining setups. Vertical orientation with counter-holder included Holding force up to 3200 N Adjustable clamping range B 34.5–64 mm Compact mounting length L1 125 mm Robust vertical clamping for secure production fixtures The vertical toggle clamp offers a holding force of 3200 N, making it suitable where reliable, vibration-resistant retention is required. The vertical action keeps the clamping motion aligned with the workpiece, reducing lateral forces and preventing unwanted movement during operations. This results in stable fixation for repetitive tasks and short cycle times. The mechanism is designed for quick engagement and release, providing a balance between secure retention and efficient workflow. Precise adjustability for varied workpiece dimensions With an adjustable clamping range from B min 34.5 mm to B max 64 mm, the device accommodates a wide span of component sizes without complex readjustment. The adjustable spindle range M 24.5–32.0 mm allows fine tuning of clamp height, while the compact L1 125 mm and overall dimensions keep the unit low-profile on fixtures. These measurable parameters translate directly into reduced set-up time and fewer fixture variants, supporting lean production and easier jig design. Simple integration and long-term operational reliability The vertical clamp is supplied including a counter-holder, enabling immediate installation into existing tooling plates or custom jigs. Standardised mounting dimensions and the clearly defined pin and hole diameters (for example D 6.5 mm, D1 6 mm) ease retrofit and repeatability. The design is focused on durability and predictable behaviour under load, reducing downtime. For workshops seeking dependable components, this clamp provides a straightforward way to improve process repeatability and operator confidence. For professional integration and procurement advice — contact Metav Werkzeuge today to discuss how the AMF vertical toggle clamp No. 6848V can be fitted into existing fixtures or bespoke tooling solutions. Technical data SKU: 4123683300NW Type: 6848V Manufacturer: AMF Product: Toggle clamp (vertical) Packaging unit: 1 Facts Holding force max: 3200 N B min: 34.5 mm B max: 64 mm C: 19 mm D: 6.5 mm D1: 6 mm E min: 7 mm E max: 36 mm F: 14 mm G: 25 mm H: 6 mm H1: 70 mm H2: 136 mm K: 8 mm L1: 125 mm M: 24.5–32.0 mm N: 48 mm P: 35 mm Special features Vertical orientation Includes counter-holder Size 3 Compact mounting length Quick-action toggle mechanism FAQ What is the maximum holding force of this clamp? The clamp delivers a maximum holding force of 3200 N, as stated for the AMF vertical toggle clamp No. 6848V (SKU 4123683300NW). Which clamping range does the device cover? The adjustable clamping capacity covers B 34.5–64 mm, with spindle adjustment M 24.5–32.0 mm for fine height tuning on the AMF toggle clamp. Is a counter-holder supplied with the clamp? Yes, the unit is supplied including a counter-holder, enabling immediate mounting and use in most fixture layouts. Which mounting dimensions are relevant for fixture design? Key mounting values include L1 125 mm, hole diameters D 6.5 mm / D1 6 mm and base heights H1 70 mm / H2 136 mm, useful when integrating the clamp into tooling plates. Can the clamp be used for repetitive industrial production? The AMF vertical toggle clamp No. 6848V is designed for repeated engagement and reliable retention, making it suitable for jigs and fixtures in serial production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Closure Clamp 6848V Vertical With Counterholder, Max Hold 1600 N - AMF
Take advantage of the vertical action and 1,600 N holding force combined with a compact, adjustable clamping range for secure, repeatable fixturing; order directly via Metav Werkzeuge or consult our advisers for technical fitment. AMF 6848V Vertical Toggle Latch (Size 2) – 1,600 N holding force, counterholder included An AMF 6848V vertical toggle latch engineered for secure vertical clamping in fixtures and jigs, supplied complete with a counterholder for precise engagement. Vertical action with counterholder included 1,600 N maximum holding force Adjustable clamping range 24–49 mm Compact footprint for fixtures and jigs Reliable clamping performance for production fixtures The vertical toggle latch provides a consistent holding force of 1,600 N, ensuring parts remain stable during assembly and machining operations. Vertical action clamps are designed to apply force through a controlled vertical motion, which reduces lateral movement and improves repeatability on fixtures. The included counterholder secures the mating surface and simplifies alignment, so clamping cycles stay uniform even under repetitive loads. This makes the latch suitable for medium-duty applications where reliable retention and repeatable positioning are required. Clear adjustability for varied workpieces Adjustment features allow a broad clamping range of 24–49 mm (B min–B max), enabling the latch to accommodate different stock thicknesses without additional parts. Spindle adjustment is provided in the range 19.5–23.5 mm, permitting fine tuning of clamping height during setup. These measurable settings reduce setup time and eliminate guesswork: once the correct position is set, the mechanism locks at the chosen engagement without further modification. The compact dimensions support integration into space-constrained jigs while maintaining straightforward mechanical adjustment. Easy integration and dependable operation Designed for straightforward mounting in production jigs, the latch combines compact external dimensions with clearly defined mounting geometry to simplify assembly layouts. Key dimensions (for example L1 = 91 mm and H2 = 99 mm) provide a stable footprint for bolting or welding into frames. The mechanism performs a positive mechanical lock when engaged, so corrective actions are minimised during cycle changes. Documentation of the principal dimensions and the 1,600 N rating supports planning for multiple fixtures and aids in choosing compatible fastening hardware for a robust installation. Contact Metav Werkzeuge today for specialist advice and assured supply of the AMF 6848V vertical toggle latch — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability and availability Technical data Article number: 4123683200NW Type: 6848V Product: Vertical toggle latch (locking clamp) Manufacturer: AMF Packaging unit: 1 Core data Size: 2 Maximum holding force: 1,600 N Clamping range B min–B max: 24–49 mm C: 13 mm D: 5.2 mm D1: 4 mm E min–E max: 5–30 mm F: 11 mm G: 19 mm H: 4.5 mm H1: 47 mm H2: 99 mm K: 6.4 mm L1: 91 mm M: 19.5–23.5 mm N: 38 mm P: 26 mm Special features Vertical action Counterholder included Adjustable clamping range 24–49 mm Compact footprint, suitable for fixtures and jigs Positive mechanical locking at 1,600 N holding force FAQ What is the maximum holding force of the latch? The AMF 6848V vertical toggle latch offers a maximum holding force of 1,600 N. Which clamping range does the device cover? The clamping range is 24–49 mm (B min–B max), allowing adaptation to different workpiece thicknesses. Is a counterholder supplied with the product? Yes, the item is delivered vertical with counterholder included, enabling precise engagement without separate components. For which applications is this clamp suitable? The latch is intended for fixtures, jigs and medium-duty production applications where secure vertical clamping and repeatability are required. How is the clamping height adjusted? Adjustment is achieved via the spindle settings, with the M dimension offering 19.5–23.5 mm for fine tuning during setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com