Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
129mm Horizontal Clamp Massive Holding Arm, 4500 N Closing Force, 5000 N Holding Force - Kukamet
Take advantage of a compact lever clamp that combines a sturdy 129 mm holding arm, a 5,000 N maximum holding force and a low-profile horizontal base for reliable, repeatable workholding; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Horizontal clamp 111 — lever clamp with 129 mm arm and 5,000 N holding force (B111-5-D-C1) The Horizontal clamp 111 is a horizontal-base lever clamp optimised for secure, repeatable clamping in assembly, welding and general workholding tasks Sturdy 129 mm holding arm 5,000 N maximum holding force Horizontal base for stable mounting Blackened finish for corrosion resistance Secure, repeatable clamping for continuous production The design delivers a consistent clamping performance through a high maximum holding force of 5,000 N and a thrust capacity of 4,500 N, which together keep workpieces immobile during machining, welding or assembly cycles. The force values are stated in newtons to provide a clear, comparable technical indicator of capacity; this level of force is suited to heavy-duty fixtures where reliable retention is required. The clamp’s lever mechanism, known for rapid engagement, reduces cycle times and supports efficient process flows in production environments. Durable construction that reduces downtime Built around a sturdy holding arm and finished for protection, this clamp is intended for long service life in workshop conditions. The arm length of 129 mm gives sufficient reach for a wide range of components while the robust construction helps resist deformation under load. The blackened surface provides an added layer of protection against surface corrosion and wear, which preserves the clamp’s functional accuracy and extends maintenance intervals. As a result, fixtures remain dependable and service interventions are less frequent. Simple mounting and seamless system integration The clamp is supplied with a horizontal base for secure attachment to flat fixtures, workbenches or assembly jigs; the base orientation supports a clean 90° lever action for predictable kinematics. The compact footprint and the straightforward mounting arrangement enable integration into existing tooling layouts with minimal rework. For installations where repeatability and quick changeover matter, the clamp’s geometry and force characteristics make it a practical choice to standardise on across several stations. For application support or to request supply of the Kukamet Horizontal clamp 111 (SKU B111-5-D-C1), contact Metav Werkzeuge for professional advice and reliable delivery — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B111-5-D-C1 GTIN: 8680731507072 eClass: 21041719 ETIM: EC011973 Data Arm length: 129 mm Weight: 1.378 kg Holding force max: 5,000 N Thrust force max: 4,500 N Angle: 90° Special features Material: blackened finish Mounting: horizontal base Massive holding arm Story trigger: lever clamp Category: clamp Manufacturer: Kukamet FAQ What holding force does the clamp provide? The clamp delivers a maximum holding force of 5,000 N and a thrust capacity of 4,500 N, making it suitable for heavy-duty workholding applications. What is the arm length and how does it affect reach? The arm length is 129 mm; this provides a practical reach for a variety of component sizes while maintaining rigidity during clamping. How is the clamp mounted? The clamp is mounted via a horizontal base, designed for secure fastening to flat plates, benches or jigs and providing a 90° lever action. What surface protection does the unit have? A blackened finish is applied to the clamp, offering improved resistance to surface corrosion and wear in workshop environments. Who manufactures the clamp and who is responsible for supply in Europe? The clamp is manufactured by Kukamet and is supplied in Europe through Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Pneumatic Plunger Clamp 1,500N Push Force, 3,700N Holding Force, Zinc Cast Body - Kukamet
The combination of a zinc‑plated cast body, dependable 1,500 N thrust and high 3,700 N holding force delivers secure, repeatable clamping for assembly and machining fixtures; the compact 1.09 kg design keeps integration effort low. Order the Pneumatic Push‑rod Clamp 673 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Push‑rod Clamp 673 — Zinc‑plated cast body, 1,500 N thrust (Kukamet) The Pneumatic Push‑rod Clamp 673 is a compact pneumatic clamping solution for production lines, jigs and repeatable fixture applications. Zinc‑plated cast body for industrial durability 1,500 N thrust with quick pneumatic actuation 3,700 N maximum holding force for secure clamping Horizontal foot mounting, 12 mm piston diameter Consistent clamping force for reliable throughput The actuator delivers a controlled 1,500 N thrust combined with a 3,700 N holding force, ensuring that workpieces remain fixed even under machining loads. By separating the pushing and holding metrics, the design provides predictable performance: thrust initiates the clamping stroke while holding force resists movement during processing. For production planners this means fewer rejects and reduced rework, as fixture repeatability improves cycle‑to‑cycle. The mechanism is suitable for frequent cycling thanks to pneumatic actuation that reduces manual effort and increases process speed. Robust construction that simplifies installation Built with a zinc‑plated cast body, the unit resists workshop wear and offers corrosion protection in standard industrial environments. The horizontal foot mounting enables straightforward attachment to fixed plates or modular fixture systems, keeping the clamp’s centre of gravity low for stable assemblies. At 1.09 kg, the component is lightweight enough to position easily yet substantial enough to absorb dynamic loads. The 12 mm piston diameter provides a compact actuator profile without sacrificing force output, allowing integration into confined fixture areas where space is at a premium. Practical advantages for workshops and fixture builders Designed for repetitive operations, the clamp supports automated and semi‑automated workflows by offering quick engagement and disengagement through pneumatic control. The compact actuator reduces the need for large valve banks and, when combined with standard compressed air systems, lowers installation complexity. The mechanical simplicity translates to low service requirements and long operational life under regular maintenance intervals. For engineers specifying clamps for jigs or assembly stations, the unit’s predictable metrics and straightforward mounting reduce engineering time and improve uptime. For reliable supply and technical advice on Kukamet clamping solutions, contact Metav Werkzeuge in Emmerich for tailored consultation and prompt delivery of the Pneumatic Push‑rod Clamp 673. Technical data Article number: 673-3-Q12 SKU: 673-3-Q12 GTIN: 8682843521700 Manufacturer: Kukamet ECLASS: 21041716 ETIM: EC011973 Facts Maximum thrust: 1,500 N Maximum holding force: 3,700 N Piston diameter: 12 mm Weight: 1.09 kg Special features Material: zinc‑plated with cast body Mounting: horizontal foot Category: Spanner UID: 673-3-Q12 FAQ What clamping force can be expected from this pneumatic clamp? The Pneumatic Push‑rod Clamp 673 provides a maximum thrust of 1,500 N and a holding force of 3,700 N, allowing secure positioning during machining and assembly. Is the clamp suitable for fixture integration in small spaces? Yes, the compact actuator with a 12 mm piston diameter and moderate weight of 1.09 kg permits installation in confined fixture arrangements and modular clamping systems. What material and surface treatment does the clamp have? The clamp features a zinc‑plated cast body, offering mechanical strength and corrosion resistance for standard industrial environments. Which SKU identifies this model for ordering and spare parts? The product is listed under SKU 673-3-Q12 (GTIN: 8682843521700) for procurement and parts ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Pneumatic Pushrod Clamp 1.5kN Thrust, Zinc-Plated Horizontal Foot - Kukamet
Take advantage of the combination of robust clamping performance and corrosion-resistant construction to secure fixtures reliably in serial production or workshop jigs. Benefit from a compact, lightweight design together with clear technical data for straightforward integration — order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. 661 Pneumatic Push-Rod Clamp by Kukamet — galvanised, 1,500 N thrust 661 is a compact pneumatic push-rod clamp designed for workshop and industrial fixtures, offering fast actuation and stable horizontal-foot mounting for repeatable clamping tasks Galvanised corrosion protection 1,500 N pneumatic thrust 2,960 N maximum holding force Horizontal-foot mounting stability Reliable power where it matters The clamp delivers a maximum piston thrust of 1,500 N, supported by a peak holding capacity of 2,960 N, which makes it suitable for medium-duty clamping in production jigs and assembly fixtures. The device’s 12 mm piston diameter is specified to clarify actuation geometry; piston size and supplied air pressure together determine force output, providing a predictable relationship between supply conditions and clamping performance. The galvanised surface ensures resistance to workshop contaminants and damp environments, helping to maintain consistent force transmission over time. Compact installation and durable construction With a weight of just 0.88 kg and a horizontal-foot mounting arrangement, the unit is designed for easy integration into existing fixture plates and conveyor-mounted stations. The galvanised construction reduces corrosion risk without the need for regular surface treatment, lowering maintenance intervals. The low mass minimises additional load on moving fixtures and enables quicker cycle times in automated sequences, while the horizontal foot offers a secure, repeatable attachment point for alignment-critical applications. Ready for fixture integration and series use The design emphasises straightforward compatibility with standard clamping layouts: the compact housing and clear force figures simplify layout calculations for jigs and automated systems. The clamp is appropriate for batch production, inspection fixtures and assembly lines where reproducible clamping and short cycle times are required. Technical documentation and dimension sheets are available to support integration; custom advice can be provided for adapting the device to specific pneumatic controls or manifold systems. Contact Metav Werkzeuge for tailored fixture recommendations and to arrange supply of the Kukamet 661 via the Emmerich team by email or phone Technical Data SKU: 661-3-Q12 GTIN: 8680731503111 Manufacturer: Kukamet Facts Weight: 0.88 kg Piston diameter: 12 mm Max thrust (druckkraft): 1,500 N Max holding force (haltekraft): 2,960 N Special features Material/finish: galvanised Mounting: horizontal foot Category: Spanner Classification: eClass 21041716, ETIM EC011973 FAQ What clamping force can be expected from this pneumatic device? The Kukamet 661 provides a piston thrust of up to 1,500 N and a maximum holding force of 2,960 N, suitable for medium-duty clamping in jigs and fixtures. Is the clamp suitable for humid or workshop environments? Yes, the galvanised finish on the 661 offers corrosion resistance that helps maintain function in typical workshop or damp conditions. How is the clamp mounted in a fixture? The unit uses a horizontal-foot mounting configuration, allowing stable attachment to fixture plates and alignment with linear or rotary tooling. What are the key dimensions relevant for integration? Piston diameter is 12 mm and the overall unit is lightweight at 0.88 kg; detailed dimension sheets are available to support exact layout planning. Can the clamp be used in automated assembly lines? The compact design and clear force specifications make the clamp suitable for integration into automated systems, where repeatable actuation and low inertial load are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Pneumatic Push‑Rod Clamp 1.5kN Push Force, Zinc-Plated, 0.88kg - Kukamet
Take advantage of the combination of robust pneumatic actuation, a compact 12 mm piston and high holding force for dependable fixture clamping. Order the clamp directly via Metav Werkzeuge or consult their specialists for integration advice and delivery from Emmerich. Pneumatic Pushrod Clamp 662 — zinc-plated, 12 mm piston (Kukamet) The Pneumatic Pushrod Clamp 662 is a compact clamping solution designed for horizontal mounting in production fixtures and jigs, offering fast pneumatic actuation and corrosion-resistant zinc plating. Pneumatic actuation with quick response Zinc-plated for corrosion resistance High holding force up to 2,960 N Engineered for dependable fixture clamping The clamp delivers a defined push force of 1,500 N and a holding force of 2,960 N, values that translate into secure workpiece retention for many routine machining and assembly tasks. Pneumatic actuation means the device operates with compressed air and provides a concise linear movement via a 12 mm piston, a specification that balances stroke control and compactness. For purchasers unfamiliar with actuator terminology: push force refers to the force applied during the active clamping motion, while holding force indicates the residual resistance the clamp provides once engaged. The zinc-plated finish increases service life in workshop environments where moisture or cutting fluids are present. Easy integration into production jigs and fixtures A horizontal foot mounting simplifies installation on plates and fixture bases, enabling rapid placement without elaborate adapters. At around 0.88 kg, the actuator remains light enough to be used in modular tooling while retaining the mechanical stability expected in industrial settings. The compact format and consistent actuation make it suitable for semi-automated stations and manual fixtures alike, reducing changeover time and contributing to improved cycle efficiency. The combination of quick pneumatic response and a defined holding specification supports repeatable clamping sequences and less rework. Proven supply and workshop support for long-term use Manufactured by Kukamet and distributed through Metav Werkzeuge, the unit benefits from a reliable supply chain and product range focused on practical workshop requirements. Metav’s role as a precision partner means access to comprehensive assortments and parts, ensuring compatibility across fixtures and replacement cycles. Choosing this clamp supports a pragmatic purchasing strategy: robust component selection, straightforward mounting, and straightforward technical data to aid specification in tender documents or CAD layouts. The product’s straightforward design also facilitates routine inspection and predictable maintenance intervals. For expert advice on fixture design or to arrange delivery of the Kukamet Pneumatic Pushrod Clamp 662 via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical guidance and prompt supply. Technical Data Article number: 662-3-Q12 GTIN: 8680731505931 eClass: 21041716 ETIM: EC011973 Facts Maximum push force: 1,500 N Maximum holding force: 2,960 N Piston diameter: 12 mm Weight: 0.88 kg SKU: 662-3-Q12 Special features Zinc-plated Horizontal foot mounting Pneumatic pushrod actuator Material: zinc-plated finish FAQ What materials is this clamp suitable for? The Pneumatic Pushrod Clamp 662 is a general-purpose clamping device; suitability depends on fixture design rather than material type, and the clamp’s forces (1,500 N push, 2,960 N hold) suit many metal and polymer workpieces when correctly fixtured. Can the clamp be mounted vertically instead of horizontally? The product is specified with a horizontal foot for base mounting; vertical installation would require an adapted fixture or consultation to ensure secure support and correct pneumatic connection. How does the 12 mm piston affect operation? A 12 mm piston provides a compact stroke and reliable linear motion, giving precise actuation suitable for confined fixture spaces while maintaining consistent clamping pressure. Is the clamp suitable for automated production cells? Yes, the pneumatic actuation and repeatable forces make the device a practical choice for semi-automated and automated fixtures when integrated with appropriate pneumatic valves and control logic. What identification details are provided for spare parts and ordering? Use the SKU 662-3-Q12 and GTIN 8680731505931 when specifying the Kukamet Pneumatic Pushrod Clamp for ordering and spare-part queries. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Push Rod Clamp Horizontal Base 1,500N Thrust, Zinc-Plated Cast Body 0.63kg - Kukamet
Dependable holding force of 1,700 N combined with a compact 0.63 kg body ensures fast fixture changes and stable clamping in workshop environments; the galvanised cast construction increases corrosion resistance and service life. Order the push-rod clamp 535 directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 535 – Horizontal-foot clamp with 1,500 N pressing force (Kukamet) Push-rod clamp 535 is a compact mechanical clamp for horizontal mounting, designed for repetitive fixture and workholding operations in workshops and light industry. Horizontal-foot mounting for stable installation Galvanised cast body for corrosion resistance Maximum pressing force 1,500 N Compact weight 0.63 kg for easy handling Consistent clamping performance for repeatable workflows The clamp delivers a maximum pressing force of 1,500 N and a holding force of 1,700 N, providing a clear performance margin for many assembly and machining tasks. These figures translate into reliable part retention during short-cycle operations and manual machining, reducing rework and misalignment. The mechanism converts operator action into a reproducible axial push, which is preferable where consistent clamping pressure is required. Such predictable behaviour supports planning of cycle times and tool paths in production processes. Durable construction that keeps the workshop running Built with a galvanised exterior and a cast body, the device resists routine wear and corrosive workshop atmospheres better than uncoated components. Galvanising protects exposed surfaces from oxidisation, while the cast main body provides the rigidity necessary to maintain alignment under load. Together these features help to extend mean time between replacements and limit unscheduled maintenance, supporting a steady production flow and lower lifetime operating costs. Fast mounting and compact handling for flexible setups The horizontal-foot design enables secure attachment to machine tables or fixture plates and supports a low-profile installation where space is restricted. The integrated pressure spindle (M8 x 50) allows fine adjustment of contact point and stroke, while the 12 mm piston diameter ensures an efficient transfer of force. At 0.63 kg, the unit is small enough to be repositioned quickly during fixture changes, which speeds set-up times and reduces downtime between jobs. Clear specifications to aid procurement and integration Technical clarity simplifies stocking and replacement planning: the clamp is supplied in a compact, ready-to-install format with standardised connection dimensions and a familiar mounting footprint. The combination of measured performance data—pressing force, holding force, piston diameter—and the robust build makes specification for jigs and fixtures straightforward. For purchasing and inventory control the product is listed under SKU 535-3-Q12-R with GTIN 8682843521236, facilitating traceability and reorder processes. For reliable workshop clamping choose the Kukamet push-rod clamp 535—contact Metav Werkzeuge for procurement advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 535-3-Q12-R GTIN: 8682843521236 SKU: 535-3-Q12-R EClass: 21041716 ETIM: EC011973 Facts Maximum pressing force: 1,500 N Holding force: 1,700 N Piston diameter: 12 mm Weight: 0.63 kg Special features Material: galvanised with cast body Mounting: horizontal foot Pressure spindle: M8 x 50 Category: Clamping FAQ What is the maximum pressing force of this clamp? The clamp provides a maximum pressing force of 1,500 N, enabling secure retention for many manual and light machining operations. Which mounting option does the clamp use? The unit is supplied with a horizontal foot for stable attachment to worktops and fixture plates. Is the clamp suitable for use in corrosive workshop atmospheres? With a galvanised cast body, the clamp offers improved resistance to oxidisation and general workshop humidity compared with uncoated components. What are the connection and adjustment specifications? Adjustment is via a M8 x 50 pressure spindle and the actuator uses a 12 mm piston diameter to deliver the specified force. How is the product identified for ordering and inventory? The product is listed under SKU 535-3-Q12-R and GTIN 8682843521236 for procurement and stock management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Push Rod Clamp Horizontal Base 2,500N Thrust, Zinc Plated 2960N Hold Force - Kukamet
Take advantage of a compact, zinc‑plated clamp that combines robust holding power and space‑saving installation for reliable fixture work; its 2,500 N clamping capacity and horizontal mounting foot make it suitable for repetitive operations in jigs and fixtures. Order directly via Metav Werkzeuge or contact the consultants for tailored specification advice. 521 Push‑rod Clamp (Horizontal foot, 2.5 kN) – Kukamet The 521 is a compact push‑rod clamp designed for horizontal mounting in fixtures and assembly jigs, delivering consistent clamping up to 2,500 N with a corrosion‑resistant zinc finish. Quick‑action clamping mechanism Horizontal mounting foot for fixture use Zinc‑plated for corrosion resistance 12 mm piston diameter for compact force transfer Robust holding where space is tight The compact design of this push‑rod clamp supports reliable fixture layouts where flange or rail space is limited. The horizontal mounting foot allows the unit to be secured close to the workpiece, reducing leverage and improving stability during repetitive cycles. With a zinc‑plated finish, the unit withstands humid workshop conditions while remaining easy to integrate into existing tooling. The small footprint and light weight lend themselves to both fixed production jigs and portable assembly rigs, enabling precise positioning without bulky attachments. Consistent clamping force for repetitive tasks Engineered for predictable performance, the device delivers a maximum clamping force of 2,500 N and a maximum holding capacity of 2,960 N, giving a clear safety margin between applied and retained forces. The 12 mm piston transfers clamping energy efficiently, which shortens cycle times and reduces the need for readjustment. For process planners this means fewer stoppages for re‑clamping and a measurable improvement in throughput when the clamp is used in repetitive assembly or inspection stations. Durable materials and practical mounting options Constructed with a zinc‑plated body, the clamp resists corrosion without requiring specialised maintenance. The horizontal foot fixing simplifies alignment and allows the use of common fasteners for installation. The robust thread spindle specification (M8x50) provides secure attachment with standard hardware. These features together lower total lifecycle effort and support predictable service intervals in busy workshops and small production lines. Integration, safety and workshop benefits The clamp’s compact actuation and clearly defined force ratings make it suitable for automated or manual applications where controlled clamping is essential. Because the design separates actuation and holding capacities, planners can select appropriate safety margins for different fixture tasks. For buyers seeking straightforward installation and straightforward spare‑part management, the unit’s standardised dimensions and familiar fastening mean shorter downtimes and easier stock management for maintenance teams. For durable, space‑efficient clamping choose Kukamet’s 521 and contact Metav Werkzeuge for specification support and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 521-3-Q12 GTIN: 8680731502756 Brand: Kukamet Weight: 0.39 kg Material: zinc‑plated Facts Maximum clamping force: 2,500 N Maximum holding force: 2,960 N Piston diameter: 12 mm Thread spindle: M8x50 ECLASS: 21041716 ETIM: EC011973 Special features Horizontal foot mounting Compact push‑rod actuation Suitable for fixture and jig work SKU: 521-3-Q12 FAQ What is the maximum clamping force of this clamp? The Kukamet 521 push‑rod clamp provides a maximum clamping force of 2,500 N, with a maximum holding capacity of 2,960 N for secure retention in fixture applications. Which mounting orientation is recommended for installation? The unit is supplied with a horizontal mounting foot designed for installation on flat fixture surfaces; the horizontal foot ensures stable engagement and straightforward alignment in jigs. What is the piston diameter and why does it matter? The piston has a 12 mm diameter, which concentrates force transfer in a small form factor and supports compact fixture designs while maintaining effective clamping power. Is the clamp protected against corrosion in workshop environments? Yes, the body is zinc‑plated, offering basic corrosion resistance suitable for standard workshop and assembly conditions without specialised coatings. Can this clamp be used in automated assembly lines? The clamp’s predictable force characteristics and compact actuation make it suitable for integration into automated or semi‑automated assembly stations where fixed clamping cycles are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Push Rod Clamp Horizontal Foot 2.5kN Thrust, Zinc Plated Cast Body 0.635kg - Kukamet
Take advantage of the combination of robust holding power, simple mounting and corrosion-resistant construction for reliable clamping in serial production. Order the Kukamet push-rod clamp directly via Metav Werkzeuge or consult our specialists for application advice. Push-rod clamp 531 — Kukamet horizontal-base clamp with 3.7 kN holding force The Push-rod clamp 531 is a horizontal-base push rod clamp designed for secure workholding in workshop and light industrial applications Horizontal base for stable mounting Holding force up to 3,700 N Zinc-plated cast body for long life Pressure spindle M8×50 for adjustable contact Consistent clamping for repeatable production A clamp that delivers measurable results reduces scrap and downtime. With a maximum holding force of 3,700 N and a maximum pressing force of 2,500 N, this device secures components reliably during machining, assembly or testing. The adjustable pressure spindle M8×50 permits fine contact pressure setting, making repeatable setups faster to achieve. Translating specification into benefit: fewer re-clamps and more consistent tolerances across batches. Built to withstand workshop environments Robust construction matters where tools are used daily. The unit features a zinc-plated cast body that combines structural rigidity with corrosion resistance, extending service life even in humid or oily surroundings. At approximately 0.635 kg, the clamp offers a favourable weight-to-stability ratio, simplifying handling during fixture changes while maintaining a solid feel when engaged. The material choice minimises maintenance and supports long-term reliability. Faster set-up and safe operation on the shop floor Fast, repeatable clamping reduces cycle time. The horizontal base allows secure bolting to fixtures or workbenches for immediate use, while the compact actuation mechanism and piston diameter 12 mm ensure a direct transfer of force with limited deflection. The mechanical principle is straightforward, enabling quick operator familiarisation and a lower risk of incorrect use compared with more complex systems. The compact design keeps the clamped area clear and accessible for machining operations. Versatile use across fixtures and applications This clamp is suited to general workshop fixturing, assembly stations and jigs where dependable lateral clamping is required. Its form factor and mounting style make it compatible with existing clamping arrays or bespoke fixtures. Where several identical clamps are required for series production, consistent performance supports process stability and predictable throughput. For procurement channels seeking an assured blend of functionality and stock availability, the supply via Metav Werkzeuge offers the additional reassurance of a European quality filter. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet push-rod clamp 531 into existing fixtures and to request technical compatibility information from Emmerich’s quality specialists Technical Data SKU: 531-3-Q12 GTIN: 8680731502800 Weight: 0.635 kg Material: zinc-plated with cast body Facts Maximum pressing force: 2,500 N Maximum holding force: 3,700 N Piston/rod diameter: 12 mm Pressure spindle: M8×50 Special features Horizontal base mounting Category: clamp / spanner Compact design for fixture integration Suitable for workshop and light industrial use FAQ What is the maximum holding force of this clamp? The Kukamet push-rod clamp 531 provides a maximum holding force of 3,700 N for secure workpiece retention. How is the clamp mounted to a fixture? Mounting is performed via the horizontal base; the design is intended for bolting to jigs, fixtures or workbench plates for stable installation. Is the finish resistant to workshop corrosion? Yes, the zinc-plated cast body offers corrosion resistance suitable for typical workshop environments. What adjustments are available for contact pressure? Contact pressure is adjusted using the M8×50 pressure spindle, allowing fine setting of pressing force for different workpieces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Pneumatic Clamp With Massive Holding Arm, 95° Angle, 5 000 N Hold - Kukamet
A robust pneumatic toggle clamp with a 130 mm arm and galvanised construction delivers dependable, repeatable clamping with high force capacity. Combining a massive holding arm, a horizontal base for simple fixture mounting and 4,500 N clamping / 5,000 N holding forces supports secure workholding — order the 611 Pneumatic Toggle Clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 611 Pneumatic Toggle Clamp — 130 mm arm, galvanised, horizontal base The 611 Pneumatic Toggle Clamp is a durable pneumatic clamping solution designed for jigs, fixtures and automated production where secure, repeatable holding is required. Massive holding arm for secure clamping 130 mm arm for extended reach Galvanised body resists corrosion Horizontal base for simple fixture mounting Reliable pneumatic performance for repeatable production The pneumatic drive provides fast, controlled clamping cycles with consistent results. Equipped to deliver 4,500 N clamping force and 5,000 N holding force, this toggle clamp allows shorter cycle times and reduced rework through stable part retention. Pneumatic actuation ensures the force is applied smoothly and can be integrated with existing compressed-air control systems, offering a measurable improvement in process reliability for repetitive assembly or machining tasks. Built for heavy-duty use and long service life Thanks to a massive holding arm and galvanised finish, the 611 model is made to withstand harsh workshop environments and frequent operation. The robust arm reduces deflection under load, which translates into improved positional accuracy and fewer rejects. The corrosion-resistant coating prolongs component life and lowers maintenance frequency, supporting predictable uptime in metalworking and assembly lines. Simple integration into fixtures and automation The clamp’s horizontal base simplifies mounting to plates, jigs or modular fixturing systems and the 130 mm arm provides extra reach where clearance is limited. An operating angle of 95° facilitates a reliable over-centre lock typical for toggle clamps, so the force is maintained even if pneumatic pressure varies momentarily. Clear reference values such as clamping and holding forces make it straightforward to match the clamp to the required workpiece loads during design and procurement. Trusted supply and practical support from Metav Metav combines decades of industry experience with a broad product range to make precision workholding accessible for workshops and production sites. The partnership backing ensures transparent logistics from Emmerich and a practical supply chain for repeat orders, helping to keep fixtures stocked and production uninterrupted. For complex applications, technical advisors can confirm compatibility and suggest mounting or control adaptations to meet specific process requirements. For robust pneumatic clamping from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and fast delivery on the 611 model — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: 611-5-D-C1 Model: 611 ETIM: EC011973 ECLASS: 21021004 Facts Arm length: 130 mm Operating angle: 95° Max clamping force: 4,500 N Max holding force: 5,000 N Special features Material: galvanised Mounting: horizontal base Massive holding arm Pneumatic actuation (toggle clamp) Category: Toggle clamp FAQ Which materials can the clamp handle reliably? The 611 Pneumatic Toggle Clamp from Kukamet is designed for general industrial use; its massive holding arm and galvanised body make it suitable for standard metal and fixture materials in production environments. How much clamping force does the clamp provide? Specified clamping and holding forces are 4,500 N (clamping) and 5,000 N (holding) for the Kukamet 611, providing clear guidance when matching the clamp to workpiece loads. How is the clamp mounted in a fixture? The clamp uses a horizontal base for straightforward plate mounting; designers can fasten the base directly to jigs or subplates for rapid integration. Is the clamp suitable for automated cycles? Yes. Pneumatic actuation and the toggle lock mechanism make the 611 model appropriate for automated and semi-automated applications where repeatable, fast clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp 5,000N Holding Force, Massive Arm With Safety Lock - Kukamet
Take advantage of a robust, zinc-plated vertical toggle clamp that combines a massive holding arm with a reliable safety latch to secure workpieces and maintain steady production. The unit delivers a high holding force while remaining compact and lightweight for easy fixturing; order via Metav Werkzeuge or consult our advisors for application support. 211 Vertical Clamp — Zinc-plated vertical toggle clamp with 5,000 N holding force The 211 Vertical Clamp is a sturdy vertical toggle clamp intended for secure fixturing in machining, welding and assembly environments, offering a compact footprint and high repeatable clamping performance. Zinc-plated construction for corrosion resistance 130 mm robust holding arm Maximum holding force 5,000 N Horizontal mounting foot for stable attachment Consistent clamping performance for productive workflows The 211 vertical clamp delivers measured forces that translate into reliable part retention on fixtures and jigs. With a maximum holding force of 5,000 N and a maximum clamping (pressing) force of 4,500 N, the clamp provides defined mechanical limits that aid in process planning and safety assessments. These figures are useful for selection when a specific retention load is required; the distinct separation between pressing and holding values clarifies the expected behaviour during actuation. The robust force characteristics support repeatable positioning, reducing rework and contributing to improved throughput in repetitive production tasks. Durable construction that reduces maintenance and downtime Built from zinc-plated material and featuring a massive holding arm, the clamp resists surface corrosion and mechanical wear in workshop environments. The horizontal mounting foot affords a secure connection to fixtures or plates, while the integrated safety latch prevents accidental release when clamped. Together, these design features extend service intervals and lower the likelihood of unexpected stoppages. The compact mass (approx. 1.51 kg) makes the clamp easy to handle during set-up without compromising structural integrity, supporting quicker changeovers and safer handling on the shop floor. Practical integration across fixturing and assembly applications As a vertical toggle-style clamp, the unit operates with a lever mechanism that transforms manual actuation into a stable clamping action, enabling quick part placement and removal while maintaining repeatable clamping geometry. The 130 mm arm provides reach for a range of workpiece sizes, and the zinc-plated finish eases cleaning and inspection routines. The clamp is suited to fixtures used in small-batch production, welding benches and assembly stations where fixed-position retention and rapid cycle times are valued. For clarification on specific mounting details or compatibility with existing jigs, technical consultation is available to ensure correct integration. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 211 vertical clamp into production setups or request technical guidance from our Emmerich team for application-specific recommendations Technical data Article number: 211-5-D-L-C1 GTIN: 8680731501438 eClass: 21041717 ETIM: EC011973 Facts Weight: 1.51 kg Arm length: 130 mm Max pressing force: 4,500 N Max holding force: 5,000 N Special features Material: zinc-plated Mounting: horizontal foot Massive holding arm Safety latch Product type: vertical toggle clamp FAQ What holding and clamping forces does the 211 provide? The 211 vertical clamp offers a maximum holding force of 5,000 N and a maximum clamping (pressing) force of 4,500 N, values that support secure fixturing in repetitive tasks. How is the clamp mounted to a fixture? Mounting is via a horizontal foot that allows stable attachment to fixture plates and jigs; the Kukamet 211 vertical clamp is designed for straightforward bolting to standard workbenches or fixture bases. Does the clamp include any safety features to prevent accidental release? Yes, the clamp includes a safety latch that secures the lever in the closed position, reducing the risk of unintended opening during handling or vibration. What materials and environments suit this clamp? The zinc-plated construction and robust arm make the clamp suitable for general workshop and light industrial environments where corrosion resistance and mechanical durability are required for assembly and machining fixtures. What are the physical dimensions and handling characteristics? The clamp has a 130 mm holding arm and an overall weight of approximately 1.51 kg, offering a balance between reach and manageable handling during set-up. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp Three-Point Massive Holding Arm, 5,000 N Hold Force - Kukamet
The combination of a massive holding arm, compact dimensions and a 5,000 N holding force ensures reliable fixture performance and consistent clamping results. Order the component directly via Metav Werkzeuge or request technical advice from our consultants for swift integration into production. Vertical clamp 211 by Kukamet — 130 mm arm, 5,000 N holding force A Vertical clamp 211 engineered for secure, repeatable holding in fixtures and jigs, featuring a horizontal base and a robust holding arm for demanding workshop and production tasks Massive holding arm for stable clamping Horizontal base for fixture mounting 130 mm arm length for broad reach Up to 5,000 N static holding force Consistent force for repeatable production results The clamp delivers a holding force of 5,000 N and a maximum clamping force of 4,500 N, values that support repeatable fixturing and reduce rework. These figures indicate how firmly a workpiece is secured and how much dynamic clamping load can be applied; the former relates to secure static retention, the latter to the peak force applied during actuation. Specified forces allow process planners to match the clamp to machining and assembly cycles where defined, measurable performance is required. The compact design and measured output make the component suitable for production fixtures where predictable clamping is essential. Robust design and protective finish for workshop use Constructed with a massive holding arm and a blackened finish, the clamp is designed for regular industrial use. The substantial arm provides mechanical stability under load, while the blackened surface treatment gives a durable external layer that reduces surface glare and offers basic protection against wear. With a unit mass of 1.364 kg, the device remains compact enough for dense fixture layouts yet substantial enough to contribute to a stable clamping arrangement. These characteristics support long service intervals and predictable behaviour in demanding environments. Mounting flexibility and straightforward integration Equipped with a horizontal base, the clamp is intended for secure mounting to fixture plates and machine tables. The base configuration simplifies alignment in assemblies and is compatible with common fixture layouts, enabling integration into jigs, welding fixtures and assembly stations. The 130 mm arm length gives additional reach without compromising rigidity, allowing effective clamping of larger or irregularly positioned workpieces. Where repeatability and fast set-up are priorities, this clamp provides clearly defined mechanical parameters that can be incorporated into process documentation. Typical applications and process benefits The unit is suited to production and workshop tasks that require dependable, repeatable clamping: fixture plates, assembly jigs and repetitive machining set-ups benefit from the clamp’s measurable performance and compact footprint. By selecting a clamp with specified static and dynamic force values, engineers can reduce trial-and-error in fixture design and ensure that clamping behaviour aligns with machining and handling requirements. The device’s balance of reach, mass and holding capability supports efficient production workflows and contributes to higher first-pass yield. For a reliable fixture solution from stock at Metav Werkzeuge, request the Kukamet Vertical clamp 211 (SKU B211-5-D-C1) for technical consultation or a tailored quotation by contacting Metav Werkzeuge at info@metav-werkzeuge.com or calling +49 2822 7131930 Technical data SKU: B211-5-D-C1 GTIN: 8680731507775 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Core technical data Arm length: 130 mm Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Weight: 1.364 kg Special features Horizontal base mounting Massive holding arm Blackened finish Category: Spanner FAQ What is the maximum holding force of this clamp? The Kukamet Vertical clamp 211 has a maximum holding force of 5,000 N, specified for static retention in fixtures. How is the clamp mounted to a fixture plate? Mounting is performed via the horizontal base; the clamp’s base is designed for secure attachment to fixture plates and machine tables. What is the reach of the clamping arm? The clamping arm provides a reach of 130 mm, suitable for a broad range of workpiece sizes within compact fixture layouts. Is the surface treated for workshop environments? The clamp is supplied with a blackened finish, providing a durable outer layer and basic surface protection appropriate for workshop use. Which SKU should be ordered for this model? Order using SKU B211-5-D-C1 to ensure the correct Kukamet Vertical clamp 211 is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp With Horizontal Base, 5,000N Holding Force, Massive Arm & Safety Lock - Kukamet
Take advantage of a robust holding arm, mechanical safety locking and proven clamping capacity to secure components reliably in repetitive production tasks. The combination of sturdy construction, compact weight and easy horizontal mounting supports efficient workstation layouts. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 211 — horizontal-base lever clamp with 4,500 N clamping capacity (Kukamet) The Vertical clamp 211 is a lever-style vertical clamp designed for secure workpiece retention in machining and assembly fixtures, suitable for workshop and industrial jigs where compact, repeatable clamping is required. Massive holding arm and safety lock Horizontal base mounting Clamping force up to 4,500 N Holding force up to 5,000 N Consistent, measurable clamping for reliable processes The clamp delivers a defined clamping force of up to 4,500 N with a maximum holding force of 5,000 N, values that support reproducible set-ups and reduce repositioning time. Specified forces offer a clear basis for fixture design and safety calculations; the numerical ratings enable planners to compare alternative clamps objectively and to size tooling for process stability. The compact performance helps maintain cycle times while ensuring workpiece security during machining or assembly. Secure mounting and durable construction for everyday use A horizontal base enables flush mounting to fixture plates and tooling blocks, simplifying integration into existing jigs. The massive holding arm and mechanical safety lock reduce the risk of accidental release during handling or vibration-prone operations, enhancing operator safety and process reliability. The clamp’s blackened finish provides a corrosion-resistant surface that withstands workshop environments while keeping running tolerances and contact surfaces protected over time. Compact integration and practical workshop benefits Weighing approximately 1.51 kg, the device is light enough for retrofit into compact toolholders yet rigid enough to resist deflection under load. The lever-clamp design supports quick manual actuation and clear visual indication of engagement, which accelerates cycle times without adding complexity. As part of a broader tooling strategy, this clamp contributes to fewer supplier interfaces and dependable supply chains when ordered via Metav, a partner known for consistent inventory and expert advice. Contact Metav Werkzeuge to discuss the Kukamet Vertical clamp 211 and its suitability for specific fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: B211-5-D-L-C1 Model: 211 Manufacturer: Kukamet SKU: B211-5-D-L-C1 Facts Arm length: 130 mm Max clamping force: 4,500 N Max holding force: 5,000 N Weight: 1.51 kg ECLASS: 21041717 ETIM: EC011973 Special features Material: blackened finish Mounting: horizontal base Massive holding arm Safety locking mechanism FAQ What clamping and holding forces does the clamp provide? The Vertical clamp 211 offers a clamping force up to 4,500 N and a holding force rating of 5,000 N, values intended for reliable fixation in jigs and fixtures. How is the clamp mounted to a fixture plate? Mounting is by a horizontal base that allows secure attachment to fixture plates and tooling blocks for compact integration. Does the clamp include a safety feature to prevent accidental release? Yes, the design incorporates a mechanical safety lock together with a robust holding arm to reduce the risk of unintended opening under vibration. Is the clamp suitable for retrofitting into existing fixtures? The compact weight of 1.51 kg and lever actuation make the unit suitable for retrofitting into many existing jigs where space is limited but rigid clamping is required. Which company supplies this model and how is it sourced? This model is supplied by Kukamet and distributed through Metav Werkzeuge; ordering via Metav ensures consistent availability and supply-chain reliability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp With Massive Holding Arm, 4.5kN Thrust / 5kN Clamp Force, Blackened - Kukamet
Take advantage of a robust clamping solution that combines a massive holding arm, high clamping performance and compact mounting for reliable fixture stability in production. Order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Vertikalspanner 212 vertical clamp by Kukamet — massive holding arm, vertical foot mounting The Vertikalspanner 212 is a compact vertical clamp designed for secure workholding in jigs, fixtures and general workshop applications, combining high holding capacity with space-saving mounting. Robust 130 mm holding arm Vertical foot mounting for stable set-up Holding force up to 5,000 N Blackened finish for corrosion resistance Dependable clamping power for repeatable production quality The clamp brings consistent clamping performance to repetitive operations thanks to a high holding force of 5,000 N and an actuation force rating of 4,500 N, which together reduce part movement and rework. The massive holding arm transmits force evenly across the clamped component, improving repeatability in serial fixturing and supporting process reliability. These measurable values allow planners to assess suitability for specific machining and assembly tasks with confidence. Compact mounting that simplifies fixture design and set-up With a 130 mm arm and a vertical foot mounting, the device integrates into tight assemblies and upright fixture plates without major redesign. The modest mass of 1.381 kg keeps added load low while maintaining rigidity, so tooling plates remain stable during handling and machining. This combination shortens set-up times and supports more efficient jig layouts, helping to keep cycle times predictable in small-batch and series production. Durable finish and solid construction for low maintenance The clamp is manufactured with a blackened finish, giving enhanced surface protection and a subdued appearance suitable for workshop environments. The heavy-duty construction minimises wear under frequent use and helps preserve clamping accuracy over time, reducing maintenance intervals. The design intent focuses on straightforward longevity rather than complex servicing, which supports continuous operation in demanding applications. For reliable fixturing backed by Kukamet quality, contact Metav Werkzeuge to request a quotation or technical clarification on the Vertikalspanner 212 and its suitability for specific fixtures and jigs. Technical data Article number: B212-5-D-C1 GTIN: 8682843522363 Manufacturer: Kukamet Facts Arm length: 130 mm Maximum holding force: 5,000 N Maximum actuation/pressing force: 4,500 N Weight: 1.381 kg eClass: 21041717 ETIM: EC011973 Special features Massiver Haltearm (massive holding arm) Vertical foot mounting (senkrechter Fuß) Blackened finish (Schwarz brüniert) Category: Spanner FAQ What clamping and actuation forces does the clamp provide? The vertical clamp offers a holding force of 5,000 N and an actuation (pressing) force of 4,500 N, values that help assess suitability for machining and assembly fixtures using the Vertikalspanner 212 Is the clamp suitable for compact fixtures and upright plates? Yes, the vertical foot mounting and a 130 mm arm length make the device appropriate for compact jigs and upright fixture plates where space is limited How does the finish contribute to longevity? The blackened finish provides surface protection against corrosion and abrasion, reducing maintenance and helping to retain clamping accuracy over time Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp With Vertical Base, 4.5kN Thrust, 5kN Holding Force, Galvanised Heavy-Duty Arm - Kukamet
Benefit from the combination of a massive holding arm, a safety locking mechanism and zinc-plated corrosion protection for reliable, repeatable clamping in production environments. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Vertical clamp 212 – Kukamet, zinc-plated with safety lock The vertical clamp 212 is a lever-operated holding solution for fixtures and workbenches, designed for secure, repeatable clamping in industrial and workshop applications. Vertical mounting with foot base Zinc-plated body resists corrosion 130 mm robust holding arm Safety locking mechanism included Reliable clamping that keeps production moving The vertical toggle design delivers consistent closing action and rapid engagement, translating into shorter cycle times and fewer handling errors. With a clamping force max 4,500 N and holding force max 5,000 N, the device secures workpieces reliably during machining, assembly or inspection operations. The term clamping force refers to the active force applied to press the part in position, while holding force indicates the static retention capacity once the clamp is engaged. This distinction helps planners choose the right clamp for load-bearing or positioning tasks and reduces downtime due to slipping or repositioning. Durable construction for long service life Constructed from zinc-plated steel, the clamp resists surface corrosion common in workshop atmospheres, extending maintenance intervals and protecting contact faces. The massive holding arm increases rigidity under load and reduces vibration transfer to the clamped component, which benefits precision tasks. A safety locking mechanism prevents accidental release during vibration or impact; this mechanical lock secures the lever in its clamped position and supports operator confidence during repetitive operations. Simple integration into fixtures and workstations The vertical foot mounting allows direct attachment to plates, clamps or bespoke fixtures, offering compact installation and stable support. At 130 mm arm length and a weight of 1.32 kg, the unit balances accessibility with a small footprint, suitable for tight assembly cells or machine tables. The lever-operated action enables quick manual cycle times without auxiliary drives, while the robust design minimises the need for frequent replacements—supporting continuous production and predictable maintenance planning. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet vertical clamp 212 into production setups; our team in Emmerich can provide specification checks, delivery options and practical installation tips Technical data Article number: 212-5-D-L-C1 GTIN: 8680731501803 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 130 mm Clamping force max: 4,500 N Holding force max: 5,000 N Weight: 1.32 kg Special features Material: zinc-plated Mounting: vertical foot Massive holding arm Safety locking mechanism Lever clamp operation FAQ What is the difference between clamping force and holding force? Clamping force refers to the active pressing force (here 4,500 N) applied during engagement; holding force indicates the static retention capability (here 5,000 N) after the clamp is closed. The Kukamet vertical clamp 212 (SKU 212-5-D-L-C1) is specified with both values to support correct selection for machining and fixturing tasks. Is the clamp suitable for workshop environments with occasional moisture? Yes. The zinc-plated finish on the Kukamet vertical clamp provides basic corrosion resistance suitable for general workshop atmospheres, helping to protect surfaces and prolong service life without specialised coatings. How is the clamp mounted and what does vertical mounting mean? The clamp uses a vertical foot mounting arrangement, meaning the base is fixed to a horizontal surface so the lever and arm operate in a vertical plane—ideal for bench fixtures and machine tables where a compact, upright clamp is required. What advantages does the 130 mm arm length provide? A 130 mm arm gives a good balance between reach and leverage, allowing secure clamping of a variety of workpiece sizes while keeping the operating lever within comfortable reach for manual actuation. Can this lever clamp be used for repetitive automated sequences? The robust lever action and safety locking mechanism of the Kukamet vertical clamp 212 make it well suited to repetitive manual cycles and semi-automated stations; for fully automated use, ensure compatibility with the cell’s actuation methods and cycle timing. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp With Vertical Base, 4.5kN Thrust, 5kN Holding Force, Hardened Black Finish - Kukamet
Take advantage of a compact, robust clamping solution that combines a massive holding arm with safety lock, a 130 mm arm and reliable holding force up to 5,000 N for secure fixturing. Order the clamp directly via Metav Werkzeuge or contact our consultants for specification advice and dependable supply from Emmerich. Vertical clamp 212 – Kukamet vertical clamp with 130 mm arm and 5 kN holding force The Vertical clamp 212 is a vertical clamping device designed for secure fixturing in workshop and light industrial environments, offering a compact footprint and robust retention for repeatable setups. Massive holding arm with safety lock 130 mm effective arm length Up to 5,000 N clamping hold Dependable holding force that stabilises production The primary advantage of this clamping device is its consistent clamping performance. With a maximum holding force of 5,000 N and a maximum pressing force of 4,500 N, the clamp secures workpieces reliably during machining or assembly. Holding force refers to the tensile retention once the clamp is engaged, ensuring parts remain immobile under lateral or dynamic loads. For workshop managers and process engineers, this translates into fewer re-clamps, reduced rework and steadier cycle times. The combination of measured forces and mechanical design supports repeatability across batches and aids quality control. Compact footprint speeds up setup and saves bench space Fitted with a 130 mm arm and a vertical foot for upright mounting, the unit is optimised for areas where space is at a premium. The compact design reduces interference with tooling and allows closer placement of adjacent fixtures, shortening tool paths and improving accessibility. At approximately 1.32 kg, the clamp is lightweight enough for flexible fixturing yet solid in feel, making it suitable for modular jig systems and agile production cells. The smaller footprint supports efficient workstation layout and faster part loading and unloading. Safety features that protect operators and processes A prominent safety lock and a massive holding arm are integrated to prevent accidental release under load, which reduces the risk of mishaps and unscheduled downtime. The safety lock maintains clamping engagement even in the event of vibration or transient forces, providing operators with extra confidence during manual handling or automated cycles. From a compliance point of view, mechanical locking reduces reliance on additional secondary restraints and simplifies risk assessments for routine operations. Robust finish and low-maintenance reliability The clamp is finished in a blackened finish that offers corrosion resistance and a uniform, workshop-tolerant appearance. Constructed for regular industrial use, the device requires minimal maintenance: periodic inspection of the locking mechanism and occasional lubrication of pivot points keep performance consistent. The robust build and low service demands contribute to a lower total cost of ownership over time, supporting continuous production without frequent replacements. For secure, compact fixturing choose the Kukamet Vertical clamp 212 and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: B212-5-D-L-C1 Model: 212 Type: Vertical clamp Dimensions & Performance Arm length: 130 mm Weight: 1.32 kg Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Features & Materials Material: blackened finish Attachment: vertical foot Massive holding arm Safety lock Category: Spanner FAQ What maximum load can the clamp retain? The clamp provides a maximum holding force of 5,000 N; the Vertical clamp 212 is specified to keep workpieces secure under the loads indicated. How is the clamp mounted to a fixture? Mounting is by a vertical foot; the Vertical clamp 212 is designed for upright installation on jigs and fixture plates. Is the locking mechanism reliable for vibration-prone processes? Yes, the integrated safety lock and massive holding arm minimise the risk of unintended release under vibration, making the clamp suitable for many workshop processes. What finish does the clamp have and how should it be maintained? The unit has a blackened finish that resists corrosion; routine lubrication of moving parts and visual inspections are sufficient to maintain serviceability. Can this clamp be used in automated clamping stations? The compact design and robust retention characteristics make the Vertical clamp 212 compatible with many automated or semi‑automated fixturing setups, subject to verification of forces and mounting details. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamping Toggle Clamp With Massive Holding Arm, 5,000 N Holding Force - Kukamet
Take advantage of a combination of robust clamping force, a massive holding arm and a compact vertical mount to secure fixtures reliably in workshop and production settings. Order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice and rapid supply from Emmerich. Kukamet 212 Vertical Clamp — galvanised, heavy-duty with 130 mm arm A 212 Vertical Clamp designed for vertical mounting and reliable fixture clamping in general workshop and light industrial applications. Massive holding arm, 130 mm reach Galvanised steel construction Holding force up to 5,000 N Vertical foot mount for secure installation Stable clamping for repeatable production quality The clamp delivers dependable fixture retention through a massive holding arm and a high-rated holding force. With a maximum holding force of 5,000 N and a pressing capacity of 4,500 N, the device is intended to keep workpieces secure during machining and assembly operations. The result is fewer interruptions for repositioning and reduced scrap rates, supporting throughput and consistent output quality. The lever-style actuation provides rapid engagement and reliable lock‑up for repetitive tasks. Built for workshop conditions and low upkeep Constructed from galvanised steel, the unit resists typical workshop wear while remaining straightforward to maintain. The corrosion-resistant finish extends service life in mixed environmental conditions, while the modest weight of 1.381 kg keeps handling and installation manageable. These attributes combine to lower total ownership effort: effective protection from surface corrosion plus simple periodic inspections ensure steady performance over time. Space-efficient form that adapts to fixturing layouts The compact profile and 130 mm arm length make the clamp suitable for dense fixture arrangements where vertical clearance and footprint matter. The vertical foot mount allows the device to be fixed directly to plates or subplates, saving horizontal space and enabling close‑packed tooling. The lever action supports quick cycle times and facilitates ergonomic operation when multiple clamps are used across a fixture. Practical integration into production workflows Designed as a pragmatic tool for everyday production use, the clamp supports straightforward integration into jigs and fixtures without complex adaptations. The galvanised body and robust arm provide secure installation and predictable behaviour under load, which simplifies process planning and reduces the need for contingency measures. For detailed layout planning, refer to the technical sheet and component dimensions to match fixture tolerances and mounting patterns. For tailored fixturing solutions including the Kukamet 212 Vertical Clamp, contact Metav Werkzeuge in Emmerich for specification support and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: 212-5-D-C1 GTIN: 8680731501773 EClass: 21041717 ETIM: EC011973 Facts Arm length: 130 mm Max holding force: 5,000 N Max pressing force: 4,500 N Weight: 1.381 kg Special features Material: galvanised steel Mounting: vertical foot Massive holding arm Lever clamp type FAQ What clamping and holding forces does the clamp provide? The Kukamet 212 vertical clamp specifies a maximum holding force of 5,000 N and a maximum pressing (clamping) force of 4,500 N. Which construction material is used for the clamp? The device is made from galvanised steel, providing enhanced surface protection suitable for workshop environments. How is the clamp mounted in a fixture? Mounting is via a vertical foot, intended for direct bolting to plates or subplates to enable compact fixturing. What are the arm length and the unit weight? Arm length is 130 mm and the unit weight is 1.381 kg. Is routine maintenance required to preserve performance? The galvanised finish reduces corrosion risk; regular visual inspection and standard lubrication of moving parts are recommended. Specific maintenance intervals are not specified in the basic data. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Toggle Clamp 4.5kN Thrust, Massive Holding Arm, Zinc Plated, 5kN Hold - Kukamet
Take advantage of a robust clamping solution that combines a galvanised finish, a massive hold arm and up to 5,000 N holding force for dependable workholding in jigs and fixtures; order via Metav Werkzeuge or consult the specialists for matching accessories and mounting advice. Vertikalspanner 211 — Vertical clamp with 130 mm arm, galvanised (Kukamet) A Vertikalspanner 211 is a lever-operated vertical clamp intended for secure, repeatable clamping in workshop fixtures and production jigs. Galvanised corrosion-resistant finish 130 mm solid hold arm Holding force up to 5,000 N Horizontal-foot mounting Consistent clamping force for reproducible results The 130 mm arm and massive hold arm construction deliver stable leverage and reduced flex during operation, providing a 5,000 N holding force with a maximum pressing capacity of 4,500 N. These measurable values translate into fewer rework cycles and a steadier production flow since the clamp maintains consistent contact pressure across repetitive cycles. Integrating this vertical clamp into a fixture reduces setup variation and supports process reliability in small-batch and series manufacturing. Robust finish and compact mounting for everyday workshop use A galvanised finish protects exposed surfaces against corrosion, supporting longer service life in workshop environments where humidity or coolant exposure may occur. The horizontal-foot mounting design simplifies installation to plates and fixtures, while the clamp’s compact mass of 1.364 kg makes integration into jigs straightforward without adding excessive weight. These practical attributes reduce maintenance frequency and make the device suitable for bench-mounted fixtures or welded bases in assembly operations. Efficient lever operation tailored to fixture and jig applications Designed as a lever clamp, the unit enables fast manual actuation and secure vertical locking, accelerating cycle times on test rigs, assembly stations and custom tooling. The geometry of the clamping arm and the specified forces make this device well suited to repeatable positioning tasks and light to medium-duty machining or assembly work. The item is supplied under the Kukamet brand and carried by Metav Werkzeuge for consistent availability and quality assurance. Contact Metav Werkzeuge for tailored selection advice or to confirm compatibility with existing fixtures; Metav Werkzeuge’s specialists in Emmerich can advise on suitable mounting plates and delivery options Technical Data Article number: 211-5-D-C1 GTIN: 8680731501407 Weight: 1.364 kg Arm length: 130 mm Core specifications Max holding force: 5,000 N Max pressing force: 4,500 N Mounting: horizontal foot eCl@ss: 21041717 ETIM: EC011973 Special features Galvanised finish Massive hold arm Lever-operated vertical clamp Suitable for fixtures and jigs FAQ What maximum holding and pressing forces does the Vertikalspanner 211 provide? The Vertikalspanner 211 offers a holding force of up to 5,000 N and a maximum pressing force of 4,500 N, suitable for secure workholding in repetitive tasks. How is the clamp mounted to a fixture or plate? Mounting is achieved via a horizontal-foot configuration; the Vertikalspanner 211 is designed for straightforward bolting to plates and jig bases. What protective finish does the product have and what does that mean for workshop use? This clamp features a galvanised finish, which enhances corrosion resistance and helps to extend service life in humid or coolant-exposed workshop environments. Is the Vertikalspanner 211 suitable for quick manual operation in assembly lines? Yes, the lever-operated vertical design enables fast manual actuation and reliable locking, making the Vertikalspanner 211 appropriate for assembly and testing stations. Which brand manufactures this vertical clamp and what is the SKU for ordering? The clamp is produced by Kukamet and is listed under SKU 211-5-D-C1 for ordering and stock reference. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
138mm Vertical Clamp With Massive Holding Arm, 750N Press Force, 1000N Hold Force - Kukamet
Take advantage of a compact clamping solution that combines a robust holding arm, precise holding force and straightforward mounting for reliable fixture work. The combination of a blackened finish, a 138 mm arm and measurable clamping values supports consistent set-up and long service life—order directly via Metav Werkzeuge or contact the consultancy team for application advice. Vertikalspanner 213 vertical clamp by Kukamet — robust holding arm and angle-foot mounting Vertikalspanner 213 is a vertical clamp engineered for fixture and jig applications in production and assembly environments, providing repeatable clamping with a compact footprint. Robust 138 mm holding arm Holding force 1,000 N capacity Clamping force 750 N performance Angle-foot mounting for secure installation Faster, more reliable fixture setup with measurable clamping performance The clamp delivers a tangible improvement in fixture reliability through its holding force 1,000 N and clamping force 750 N, values that translate directly into secure workpiece retention during machining and assembly. The measured forces allow planners to match clamping capacity with process requirements, reducing setup iterations and downtime. The device’s compact dimensions and 138 mm arm length make it particularly suited to confined fixture layouts where predictable force application is essential. Durable construction and finish for long service intervals Constructed with a blackened finish, the unit resists corrosion and surface wear while maintaining a professional appearance on the production bench. The massive holding arm provides mechanical stiffness that minimises deformation under load, preserving positional accuracy across repeated cycles. For technicians and production engineers, this means fewer adjustments, consistent part quality and a longer service life for fixture components. Integration and practical mounting for workshop efficiency Equipped with an angle-foot mounting, the clamp installs securely on plates and tooling blocks, enabling straightforward retrofitting into existing jigs. The compact form factor and clear technical data support planning and procurement: the clamp can be specified with confidence for small-batch production or series manufacture alike. Backed by a recognised manufacturer, the unit supports efficient workflow design and reliable clamping across varied applications. Discuss Kukamet’s 213 vertical clamp with Metav Werkzeuge to assess fit for specific fixtures—Metav Werkzeuge offers technical guidance and reliable supply from Emmerich Technical data Article number: B213-1-D-C3 GTIN: 8682843522424 Manufacturer: Kukamet Facts Arm length: 138 mm Holding force: 1,000 N Clamping (pressing) force: 750 N Weight: 0.196 kg eClass: 21041717 ETIM: EC011973 Special features Material: blackened finish Mounting: angle foot Massive holding arm Type: vertical clamp SKU: B213-1-D-C3 FAQ What clamping forces does this vertical clamp provide? The vertical clamp provides a holding force of 1,000 N and a clamping force of 750 N, values specified for the Kukamet 213 vertical clamp and useful for matching to workpiece requirements. Is the clamp suitable for fixture use in confined spaces? Yes, the compact design and 138 mm arm length make the device suitable for tight fixture layouts while maintaining reliable force transmission. What surface protection does the clamp feature? The clamp is finished with a blackened surface, offering increased resistance to corrosion and wear in workshop environments. Who supplies and supports this clamp in Europe? The Kukamet 213 vertical clamp is supplied via Metav Werkzeuge, which provides distribution and technical consultancy from Emmerich. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
138mm Vertical Clamp With Massive Holding Arm, 750N Thrust / 1000N Hold - Kukamet
The combination of a galvanised finish, a massive holding arm and a compact 138 mm reach ensures reliable, long-lasting clamping and secure positioning in small fixtures; benefit from robust holding force and straightforward integration via an angle foot mounting—order or request advice through Metav Werkzeuge for fast delivery and expert guidance. Vertikalspanner 213 – Vertical clamp with galvanised finish and 1,000 N holding force Vertikalspanner 213 is a compact vertical clamp intended for precision workholding and fixture applications in workshops and light production environments Galvanised steel construction Massive holding arm design 138 mm arm length for versatile reach Holding force up to 1,000 N Dependable clamping performance for routine production The vertical clamp performs as a dependable fixture element where reproducible clamping is required. With a holding force of 1,000 N and a maximum clamping force of 750 N, the device secures workpieces reliably during machining, assembly or inspection operations. The compact 138 mm arm provides a useful reach without excessive bulk, making the clamp suitable for confined setups and jigs. Technical values are geared to repeatable results, supporting shorter setup times and improved process stability. Built for stability and corrosion resistance A galvanised surface treatment protects the clamp against corrosion in standard workshop environments, extending service life and reducing maintenance intervals. The massive holding arm design increases rigidity at the clamping point, lowering the risk of vibration and micro-movement under load. The clamp is supplied with an angle foot mounting for straightforward attachment to fixture plates or tooling blocks, enabling a stable connection and reliable force transmission during cyclical use. Quick integration into existing fixtures and modular systems Integration into modular fixturing is simplified by the clamp’s compact footprint and standardised mounting style. Lightweight construction at approximately 0.196 kg facilitates handling and positioning when assembling multi-point clamping arrangements or retrofitting existing jigs. The combination of compact size and significant clamping capability supports versatile use across inspection benches, light milling fixtures and general workshop fixturing, improving throughput without adding complexity to the setup process. Contact Metav Werkzeuge for a tailored quotation and specification advice on the Kukamet Vertikalspanner 213 to ensure optimal integration in the production workflow Technical Data Article number: 213-1-D-C3 GTIN: 8680731505863 Brand: Kukamet Facts Arm length: 138 mm Weight: 0.196 kg Holding force max: 1,000 N Clamping force max: 750 N eCl@ss: 21041717 ETIM: EC011973 Special features Material: galvanised steel Mounting: angle foot Massive holding arm Category: Clamps SKU: 213-1-D-C3 FAQ Is the clamp suitable for fixture use in small production runs? The Kukamet Vertikalspanner 213 is designed for fixture and workholding tasks in workshops and small production, offering repeatable fixation with up to 1,000 N holding force. How is the clamp mounted to a fixture plate? Mounting is performed via the supplied angle foot; the vertical clamp provides a compact interface for secure attachment to plates or tooling blocks. What material and surface protection does the clamp have? The device is made from steel with a galvanised finish, providing corrosion resistance appropriate for standard workshop conditions. What reach can be expected from the clamp arm? The arm length is 138 mm, providing a compact reach that is suitable for tight jig spaces while still allowing reliable engagement with the workpiece. Where can the technical drawing or catalogue information be found? A catalogue page and product documentation are available for the Vertikalspanner 213, showing dimensions and mounting details for planning and integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1400N Holding Force Vertical Clamp Waagerechter Foot, M6x40 Spindle - Kukamet
Take advantage of a compact, reliable clamping solution that pairs a high holding force with a precise pressure spindle M6x40 for repeatable setups; order directly via Metav Werkzeuge or consult our specialists for integration advice. Vertikalspanner 211 – Vertical clamp with 1,200 N pressure spindle, horizontal base (Kukamet) The Vertikalspanner 211 is a compact vertical clamp intended for jigs, fixtures and assembly stations where repeatable, space-saving clamping is required. 1,400 N maximum holding force 1,200 N maximum pressure force Horizontal base for stable mounting Blackened finish, compact 0.23 kg mass Consistent clamping performance for repeatable production The compact vertical clamp delivers a defined holding force of 1,400 N with a maximum pressure force of 1,200 N, values that support secure retention of workpieces during machining and assembly. The difference between holding and pressure forces is explained by the mechanical leverage of the toggle system: the actuator transmits a set clamping pressure while the latch maintains the workpiece in position. The incorporated pressure spindle M6x40 provides fine adjustment of contact pressure and compensates for part tolerances, enabling precisely controlled workholding without additional shims. This mechanical simplicity reduces setup variability and supports efficient cycle times on production lines. Small footprint and straightforward integration into fixtures Designed with a horizontal base, the clamp mounts easily to plates and tooling boards, taking up little vertical space while maintaining accessibility to the work area. At just 0.23 kg, the unit contributes minimal mass to assemblies and is suitable for fixtures where low weight and compact dimensions matter. The blackened finish offers basic protection against everyday workshop wear and provides a matt surface that reduces glare in inspection zones. Owing to its reduced size and standardised mounting, the clamp integrates rapidly into existing jigs or new fixture concepts, helping to shorten implementation time and conserve bench space. Durable mechanism that supports workshop routines Built as a lever-operated toggle clamp, the device relies on proven mechanics to deliver long service life with minimal maintenance. The toggle principle converts actuator movement into a high clamping force with limited travel, which reduces stress on both the clamp and the retained component. Components are finished to resist surface wear, and the absence of complex electronics means fewer failure modes and straightforward inspection routines. This robustness renders the clamp a pragmatic choice for repetitive tasks, where uptime and ease of replacement are decisive for throughput and process stability. For procurement or technical clarification on the Kukamet vertical clamp, contact Metav Werkzeuge for tailored advice and fast delivery from our Emmerich hub via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B211-2 GTIN: 8680731503814 eClass: 21041717 ETIM: EC011973 Core technical data Holding force: 1,400 N Pressure force: 1,200 N Weight: 0.23 kg Pressure spindle: M6x40 Materials & features Material: blackened finish Mounting: horizontal base Special feature: none Product type: Vertical clamp Manufacturer: Kukamet FAQ What clamping forces does the Vertikalspanner 211 provide? The Vertikalspanner 211 offers a maximum holding force of 1,400 N and a maximum pressure force of 1,200 N, enabling secure retention for many light to medium-duty applications. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, allowing the clamp to be fixed to plates or tooling boards for straightforward integration into jigs and fixtures. Can the contact pressure be adjusted? Yes, the clamp features a pressure spindle M6x40 for fine adjustment, permitting compensation for part tolerances and controlled clamping pressure in the Kukamet vertical clamp B211-2. Is the clamp suitable for automated stations? The compact design and standardised mounting make the device suitable for use in assembly lines and semi-automated stations where mechanical clamping is required. What finish does the clamp have and how does it affect durability? The component is supplied with a blackened finish, which improves surface wear resistance and reduces visual reflections in inspection areas. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1400N Three-Point Pneumatic Clamp 95° Horizontal Base, Zinc-Coated 1.2kN Actuating Force - Kukamet
Take advantage of the combination of robust zinc-plated construction, reliable 1,200 N clamping force and compact form for consistent workholding and smooth production flow; order the pneumatic clamp directly via Metav Werkzeuge or ask the consultants for integration advice. Pneumatic Clamp 631 — horizontal-foot pneumatic clamping solution, 1,200 N clamping force The Pneumatic Clamp 631 provides horizontal-foot mounting and is designed for secure, repeatable workholding in machining and assembly fixtures Robust zinc-plated finish for corrosion resistance Horizontal-foot design for stable mounting 1,200 N clamping force for secure holding Compact weight 0.765 kg for flexible positioning Reliable clamping performance to raise throughput The 631 series delivers a clear operational advantage through its 1,200 N rated clamping force and 1,400 N maximum holding capacity, which together ensure stable fixation of workpieces during machining and assembly. By separating nominal clamping force and holding force, the design provides predictable behaviour under dynamic loads, reducing part movement and rework. The pneumatic actuation yields short, repeatable cycles, supporting higher throughput and consistent process quality in production environments where cycle stability is critical. Zinc-plated durability for long service life A zinc-plated surface protects the mechanism from corrosion and supports low-maintenance use in workshop conditions. The corrosion-resistant finish prolongs fixture life and maintains smooth mechanical action over time, which lowers the frequency of replacements and interruptions. The overall mass of 0.765 kg makes the unit easy to handle during installation and replacement, while the sturdy finish helps preserve appearance and function in busy shop floors. Stable mounting and ergonomic lever geometry Engineered with a horizontal foot for secure base attachment and a 95° lever angle for convenient operation, the clamp integrates into jigs and fixtures with minimal adaption. The horizontal-foot mounting reduces lateral movement and simplifies alignment on plates or straight rails, while the compact footprint conserves fixture space. The pneumatic mechanism provides controlled motion and consistent clamp travel, which supports automated or semi-automated sequences without the variability inherent in manual devices. Suited for fixture builders and production workshops This clamping solution is appropriate for workshop and industrial applications where repeatability and compact integration matter. The combination of robust construction and predictable pneumatic actuation supports fixture builders, maintenance teams and production engineers aiming to standardise workholding across small-batch and series production. Compared with purely mechanical levers, the pneumatic option reduces operator strain and delivers faster cycle times — a practical, efficiency-driven choice for modern shops. Speak with Metav Werkzeuge for tailored integration of the Kukamet Pneumatic Clamp 631 into existing fixtures and production lines — Metav’s consultants in Emmerich provide technical guidance and supply chain reliability to ensure fast, dependable delivery Technical Data Article number: 631-2 GTIN: 8680731503005 Manufacturer: Kukamet Facts Clamping force: 1,200 N Holding force: 1,400 N Weight: 0.765 kg Lever angle: 95° Special features Material: zinc-plated Mounting: horizontal foot Category: spanner FAQ What clamping and holding forces are specified for this unit? The Pneumatic Clamp 631 from Kukamet specifies a clamping force of 1,200 N and a maximum holding force of 1,400 N, values that support secure fixation during machining and assembly. Can the clamp be mounted on a flat fixture plate? Yes; the horizontal foot design allows stable attachment to flat plates and standard fixture bases, facilitating alignment in jigs and bespoke fixtures. How does the zinc-plated finish influence maintenance? The zinc-plated surface on the Kukamet Pneumatic Clamp 631 offers corrosion resistance that reduces maintenance frequency and maintains reliable function in workshop conditions. Is the mechanism suitable for automated cycles? The pneumatic actuation provides repeatable motion and consistent clamp travel, making the unit suitable for automated or semi-automated production sequences where repeatability is required. Does the weight affect ease of installation? At 0.765 kg, the clamp is lightweight enough for straightforward handling and positioning during fixture assembly while remaining robust in operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1400N Vertical Clamp 1200N Closing Force, Zinc Plated, Angle Base - Kukamet
Take advantage of a compact, corrosion‑resistant clamping solution that combines a 1,200 N clamping force with a 1,400 N holding capacity for reliable workholding in fixtures and jigs. The zinc‑plated construction and M6 x 40 pressure spindle provide durable contact and straightforward integration on an angle base. Order directly via Metav Werkzeuge or consult our team for application advice. Vertical clamp 213 – Vertical toggle clamp with zinc‑plated finish and 1.2 kN force (Kukamet) The Vertical clamp 213 is a sturdy vertical toggle clamp designed for secure fixture work in small to medium assembly and machining tasks, featuring a right‑angle mounting foot and a threaded pressure spindle for fine contact adjustment. Zinc‑plated steel for corrosion protection Max clamping force 1,200 N Holding force up to 1,400 N Angle base for right‑angle mounting Secure, measurable clamping for dependable production flow The clamp delivers a defined clamping force of 1,200 N and a holding force of 1,400 N, providing measurable security for workpieces during processing. These figures translate into less part movement under load and fewer reworks, supporting more consistent cycle times. The presence of an adjustable M6 x 40 pressure spindle allows fine setting of contact pressure without additional adaptor parts, which simplifies setup and reduces changeover time while maintaining a compact footprint. Compact mounting and simple integration into jigs A right‑angle angle base enables straightforward installation on fixture plates or machine tables where space is limited. At 0.265 kg, the unit is lightweight yet robust, making it suitable for indexed fixtures and portable clamping assemblies. The configuration avoids complex brackets: the fixed mounting foot and standard thread size mean direct attachment and predictable alignment, easing assembly-line planning and saving installation effort. Durable finish and straightforward maintenance for long service life The zinc‑plated surface provides basic corrosion protection appropriate for workshop environments, reducing the need for immediate replacement due to surface oxidation. Constructed for mechanical simplicity, the clamp has no special features requiring proprietary tooling; routine inspection of the spindle and pivot points is sufficient to keep the device serviceable. Its straightforward design supports reliable uptime and fits into broader standardisation strategies for workholding components. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertical clamp 213 into existing fixtures and to request technical clarifications by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data SKU: 213-2 GTIN: 8680731501865 Model: 213 Manufacturer: Kukamet Core data Max clamping force: 1,200 N Holding force: 1,400 N Weight: 0.265 kg Pressure spindle: M6 x 40 ECLASS: 21041717 ETIM: EC011973 Special features Material: zinc‑plated steel Mounting: angle base Arm: not applicable Special features: none Category: Toggle clamp / clamp FAQ What clamping force does this clamp provide? The Kukamet vertical clamp 213 offers a maximum clamping force of 1,200 N, with a holding capacity listed at 1,400 N for secure workholding. Which threaded spindle is fitted for contact adjustment? Adjustment is provided via an M6 x 40 pressure spindle, allowing fine control of the contact point and clamping pressure on the workpiece. How is the clamp mounted to a fixture? Mounting is via an angle base designed for right‑angle attachment to plates or fixtures; the compact footprint supports integration into jigs without additional brackets. What material and finish does the clamp have? The body is zinc‑plated steel, offering basic corrosion resistance suitable for standard workshop conditions. What is the part number or SKU for ordering? The item is sold as Kukamet model 213 with SKU 213-2 and GTIN 8680731501865. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
140mm Machine Table Clamp 240mm Clamping Height 30x15mm Rail Cross-Section - BESSEY
Take advantage of the clamp's combination of high clamping height and compact rail interface to improve machining flexibility while maintaining a secure, repeatable fixture. Suitable for varied table-mounted setups and robust enough for workshop use. Order the clamp directly via Metav Werkzeuge or consult our team for sizing and integration advice. BESSEY machine table clamp — 240 mm clamp height, 140 mm reach The BESSEY machine table clamp is a workshop-grade clamping solution for table-mounted fixturing, offering a tall 240 mm clamp height and a 140 mm outreach for flexible part positioning. 240 mm clamp height for tall setups 140 mm outreach for versatile positioning Rail cross‑section 30 x 15 mm for rigid guide Robust, workshop-ready construction by BESSEY Secure, repeatable clamping for production tasks A tall clamping range enables secure fixation of larger or irregular components. The 240 mm clamp height provides greater vertical tolerance compared with standard table clamps, reducing the need for auxiliary shims and speeding up setup times. This translates into measurable efficiency gains on repeat jobs, as fixtures can be re-established with consistent force and alignment. The design focuses on reliable contact and stable force transmission for repeatable machining operations. Flexible positioning that simplifies fixture design With an outreach of 140 mm and a rail cross-section of 30 x 15 mm, this clamping solution fits compact guide rails while allowing lateral freedom for versatile part placement. The narrow rail profile supports tight carriage spacing on multi-clamp fixtures, making it possible to build compact, space-efficient assemblies. As a result, fewer bespoke fixtures are needed, and bench space can be used more effectively without compromising clamping rigidity. Robust build for workshop durability and low-maintenance use Engineered for regular use in industrial and trade environments, the clamp's construction emphasises durability and straightforward handling. The robust guidance and clamping mechanics are intended to minimise setup time and maintenance intervals, contributing to continuous production flow. For operations where uptime matters, the focus on solid mechanics means predictable performance under frequent cycle conditions. Practical integration and compatibility with table-mounted systems The clamp suits standard machine tables and modular fixturing systems that accept narrow guide rails. Its specifications allow easy integration into existing workholding arrangements, enabling quick retrofits or expansions of current setups. When planning system upgrades, assess rail compatibility and clamp spacing to exploit the 30 x 15 mm cross-section fully and achieve optimal load distribution across the fixture. For precise fixturing with proven workshop resilience, contact Metav Werkzeuge to request a tailored quotation or technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Technical Data Article number: 4123740050NW Label: Maschinentischspanner Spann-H.240mm A.140mm Schienenquerschnitt 30x15mm BESSEY Product type: Machine table clamp Brand: BESSEY Packaging unit: 1 Facts Clamp height: 240 mm Outreach: 140 mm Rail cross-section: 30 x 15 mm Special features Suitable for table-mounted fixturing Compact rail interface for dense clamp arrangements Workshop-oriented construction FAQ What clamp height does this table clamp offer? The clamp provides a clamp height of 240 mm, specified on the BESSEY machine table clamp (SKU 4123740050NW). Which rail size is required for mounting? Mounting uses a rail with a cross-section of 30 x 15 mm, matching the clamp's guide interface. Is the clamp suitable for dense multi-clamp fixtures? Yes, the compact rail interface and 140 mm outreach enable close spacing for multiple clamps in confined fixture layouts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140° Pneumatic Clamp With Vertical Handle, 1200 N Clamping Force, Zinc-Plated - Kukamet
Reliable fixation and compact design make this pneumatic clamp an efficient choice for repetitive assembly and machining tasks: 1200 N clamping force, 1400 N holding force and zinc‑plated construction ensure secure, corrosion‑resistant performance and long service life. Order the 651 directly via Metav Werkzeuge or ask our consultants for application advice. Kukamet 651 Pneumatic Clamp — vertical handle, 1200 N clamping force The 651 pneumatic clamp is a compact, zinc‑plated fixture for secure workpiece holding in assembly and machining, equipped with a vertical handle and vertical foot mounting. Vertical handle for ergonomic operation Zinc‑plated corrosion protection 1200 N clamping force, 1400 N hold strength Reliable clamping for continuous production The pneumatic actuation delivers consistent, repeatable clamping that reduces setup variation and minimises rework. With a rated 1200 N clamping force and 1400 N holding force, the device secures components reliably during handling and machining operations. Pneumatic actuation ensures rapid cycle times and predictable force application, which supports higher throughput and better first‑pass yields. The compact actuator mechanism also keeps the fixture footprint small, aiding dense production layouts. Durable finish and compact mounting for workshop use A zinc‑plated finish provides robust corrosion resistance in standard workshop environments, extending service intervals and reducing replacement rates. The clamp’s vertical foot mounting and fixed 90° angle permit stable right‑angle installation on jigs, pallets or production benches, while the lightweight construction (approximately 0.62 kg) simplifies integration into modular fixtures. These attributes combine to reduce downtime and support reliable long‑term performance in industrial settings. Ergonomic operation that speeds routine tasks The vertical handle is designed for straightforward, ergonomic actuation, allowing operators to engage and release the clamp swiftly with minimal fatigue. This ergonomic detail translates into measurable time savings across repeated cycles and contributes to improved workplace comfort—important in busy assembly environments where speed and operator wellbeing matter. The vertical orientation also keeps the handle clear of adjacent tooling, improving accessibility in compact assemblies. Flexible application and straightforward installation Engineered for fixture and jig use, this pneumatic clamping device suits assembly, welding and light machining tasks that require secure, repeatable holding at a right angle. The compact design and established mounting pattern support integration into existing tooling systems without major redesign. Supplied as a single‑unit SKU 651-2-H, the clamp offers a practical combination of strength, corrosion protection and low mass that benefits both bespoke fixtures and volume production jigs. Order the Kukamet 651 via Metav Werkzeuge for dependable clamping solutions and expert advice—contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specification guidance and application support. Technical data Article number: 651-2-H GTIN: 8682843521632 Manufacturer: Kukamet Facts Weight: 0.62 kg Max clamping force: 1200 N Max holding force: 1400 N Angle: 90° Special features Material: zinc‑plated Mounting: vertical foot Handle: vertical eClass: 21021004 ETIM: EC011973 FAQ What clamping and holding forces does this clamp provide? The Kukamet 651 pneumatic clamp delivers a maximum clamping force of 1200 N and a holding force of 1400 N for secure workpiece fixation. How is the clamp installed on a fixture? The unit is designed for vertical foot mounting with a fixed 90° orientation; the SKU 651-2-H fits standard right‑angle fixture arrangements. What surface finish and durability can be expected? The clamp is zinc‑plated, providing corrosion resistance suitable for typical workshop conditions and extending the service life of the component. Is the handle suited to high‑cycle operations? Yes. The vertical handle design on the 651 supports quick, ergonomic actuation that helps maintain cycle speed and reduce operator fatigue during repetitive use. Which production areas benefit most from this clamp? The device is intended for assembly jigs, welding fixtures and light machining applications where compact, repeatable clamping at right angles is required; the Kukamet clamp is specified as SKU 651-2-H. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
141mm Vertical Clamp 3,300N Holding Force, 3,000N Thrust, Angled Base, Hardened Blackened Finish - Kukamet
Compact, robust and easy to integrate: the Kukamet vertical clamp delivers a solid holding arm, a 141 mm reach and a reliable holding force up to 3,300 N for stable workholding in production and jigs. Benefit from a compact footprint and a black blued finish that resists workshop wear. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 213 — Vertical lever clamp with 141 mm arm and angle base (Kukamet) Vertikalspanner 213 is a vertical lever clamp engineered for secure fixture work, combining a robust holding arm with a compact mounting footprint. Solid holding arm for stable clamping 141 mm reach for compact fixtures Angle base for secure mounting Up to 3,300 N holding force Consistent, high holding force for repeatable production The clamp provides a holding force of 3,300 N with an actuation pressure of 3,000 N, ensuring consistent restraint of workpieces during repetitive processes. This level of force reduces slippage and rework, improving throughput in assembly, welding or machining jigs. The mechanical design converts lever motion into dependable clamping action, delivering industrial-grade repeatability without complex pneumatic systems. Small footprint and straightforward mounting for tight fixtures With a 141 mm arm and an angle base, the device integrates into compact jigs and bench setups while maintaining accessibility to the clamped area. The low mass—approximately 0.972 kg—keeps additional load on moving fixtures minimal and helps preserve cycle dynamics. Mounting on an angled foot simplifies alignment and makes the clamp suitable for constrained layouts where space optimisation is essential. Robust construction and workshop-capable finish A solid holding arm and a black blued finish provide mechanical strength and increased resistance to corrosion and handling wear. The sturdy build supports long-term use in production environments and reduces maintenance intervals compared with lighter, less rigid alternatives. Supplied design and materials focus on pragmatic longevity so that fixtures remain stable and predictable over many cycles. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet vertical clamp 213 into existing jigs and fixtures; phone +49 2822 7131930 or email info@metav-werkzeuge.com for specification support and ordering assistance Technical data Article number: B213-4-D-C2 GTIN: 8680731508024 Manufacturer: Kukamet Facts Weight: 0.972 kg Arm length: 141 mm Max holding force: 3,300 N Max actuation/pressing force: 3,000 N eClass: 21041717 ETIM: EC011973 Special features Mounting: angle base (Winkelfuß) Finish/material: black blued Solid holding arm Application trigger: lever clamp Category: Clamps (Spanner) FAQ What maximum holding force does the Vertikalspanner 213 provide? The Vertikalspanner 213 delivers a maximum holding force of 3,300 N as specified for reliable workpiece restraint. What is the reach of the clamp arm? The clamp has an arm length of 141 mm, giving a compact reach suitable for tight fixtures and jigs. How is the clamp mounted in a fixture? Mounting is via an angle base (Winkelfuß), allowing secure attachment to plates and angled surfaces for stable integration. What is the finish and weight of the vertical clamp? The Kukamet vertical clamp has a black blued finish and a weight of approximately 0.972 kg, offering a durable surface and low added mass. Which article number and GTIN identify this product? The SKU is B213-4-D-C2 and the GTIN is 8680731508024 for ordering and inventory reference. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com