Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
150mm Pneumatic Clamp Three-Point, Vertical Base, 3,000 N Thrust, Galvanised Massive Holding Arm - Kukamet
The combination of a massive holding arm, a 150 mm reach and a galvanised finish delivers reliable clamping for repetitive fixture tasks; this ensures stable production and lower rework rates. Order the clamp directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Pneumatikspanner 651 — Pneumatic clamp with 150 mm reach and galvanised finish (Kukamet) The Pneumatikspanner 651 is a vertical-foot pneumatic clamp designed for fixture and assembly applications, providing robust 90° clamping and high holding performance in machining and production environments. Massive holding arm for rigid clamping 150 mm reach for larger workpieces Galvanised finish for corrosion resistance Vertical-foot mounting, 90° clamping angle Robust clamping where repeatability matters The clamp offers a massive holding arm combined with a vertical-foot mounting, giving fixtures a stable base and minimising deflection during repeated cycles. The design translates into consistent part positioning and fewer rejects, which supports higher overall equipment effectiveness. By integrating a 90° clamping orientation, the unit suits standard tooling plates and jigs, reducing the need for complex rework. The galvanised surface enhances resistance to coolant and workshop humidity, prolonging service intervals and reducing downtime. Fast set-up and secure force transmission With a 150 mm reach and clear separation between actuation and clamping interfaces, the device streamlines set-up in modular fixturing systems. The pneumatic actuation allows for quick engagement and release, while the specified force capacities ensure secure fixation of medium-duty components. The combination of an actuation force of 3,000 N and a holding force up to 3,300 N supports reliable retention during machining and light assembly operations. The simple footprint of the vertical foot eases retrofitting into existing fixtures without extensive rework. Low-maintenance durability for workshop use Constructed in galvanised steel, the clamp resists corrosion in workshop conditions and requires only routine inspection of pneumatic connections and seals. The solidly built arm minimises wear at the contact points, resulting in longer intervals between part replacement. For maintenance teams, the straightforward mechanical layout simplifies checks and spares handling, helping to keep mean time to repair low and preserving production flow. Integration into production and safety considerations The clamp has been engineered for safe integration into automated sequences and manual fixtures alike. Its defined 90° clamping angle and vertical-base mounting support predictable kinematics, which simplifies risk assessments and guarding plans. When combined with suitable pressure regulation and tubing, the device can be incorporated into central pneumatic systems for coordinated actuation across multiple stations, improving throughput while maintaining operator safety. Contact Metav Werkzeuge for tailored advice on specifying the Kukamet Pneumatikspanner 651 with 3,300 N holding force for specific fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 651-4-D-C2 Brand: Kukamet Category: Spanner ECLASS: 21021004 ETIM: EC011973 Core specifications Arm length: 150 mm Max actuation force: 3,000 N Max holding force: 3,300 N Clamping angle: 90° Design and features Galvanised material Massive holding arm Vertical-foot mounting Suitable for fixture and assembly use FAQ What maximum holding force does the clamp provide? The Kukamet Pneumatikspanner 651 provides a maximum holding force of 3,300 N, ensuring secure retention for many medium‑duty workshop applications. Is the clamp suitable for wet or coolant‑exposed environments? The clamp’s galvanised finish improves corrosion resistance, making the unit well suited to environments with occasional coolant exposure or higher humidity. How is the device mounted to a fixture plate? The unit uses a vertical‑foot mounting, allowing secure bolting to standard fixture plates and straightforward integration into existing jigs. Can the reach accommodate larger fixtured parts? With a 150 mm arm, the clamp offers extended reach for larger workpieces and provides greater flexibility in positioning clamping points. Does the clamp require specialised maintenance tools? Maintenance is routine: inspection of pneumatic connections and seals plus occasional checks of the clamping interface; no special tools are typically required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Pneumatic Clamp With 3,000N Thrust, 3,300N Hold Force, Horizontal Foot, Massive Holding Arm, Galvanised - Kukamet
Reliable clamping for small to medium production runs is achieved through the combination of a galvanised construction, a 150 mm solid holding arm and a holding capacity of 3,300 N; order the Pneumatic Clamp directly via Metav Werkzeuge or consult our specialists for application advice. 611 Pneumatic Clamp by Kukamet — 3,300 N holding force, 150 mm arm A 611 Pneumatic Clamp designed for robust horizontal mounting and precise, repeatable production clamping. Galvanised steel construction 150 mm robust holding arm Horizontal foot mounting Up to 3,300 N holding force Consistent clamping performance for production workflows The 611 Pneumatic Clamp delivers a combination of measured clamping and secure holding that supports repeatable processes on assembly lines and jigs. With a maximum clamping force of 3,000 N and a holding force of 3,300 N, the device is suited to applications where parts must remain fixed while machining, welding or inspection takes place. Pneumatic actuation ensures rapid cycle times and consistent force application; the controlled air-driven mechanism reduces force variance compared with manual levers, helping to lower rework rates and improve throughput. Space-saving mounting with stable support Designed for horizontal foot mounting, the clamp integrates into confined fixture setups without compromising accessibility. The 150 mm holding arm provides reach while keeping the overall footprint compact; the arm’s massive construction stabilises workpieces and resists torsion under load. The device’s 95° operating angle is optimised for lever-style engagement, allowing secure clamping in tight assemblies where vertical clamps would obstruct tooling or handling. Corrosion-resistant materials and reduced upkeep Constructed from galvanised components, the clamp is protected against corrosion in workshop environments, which extends service intervals and maintains functional aesthetics. The robust arm and hardened internal elements are selected to withstand repeated cycles; as a result, downtime for replacement is minimised and the total cost of ownership is reduced. Where occasional cleaning and inspection are performed, the protective finish preserves contact surfaces and prevents premature wear, keeping fixtures stable over extended production runs. Safe integration and clear specification for engineers The clamping device is specified with measurable performance figures so planners and engineers can design fixtures with confidence. The pneumatic action allows controlled engagement that can be integrated with existing air systems and valve logic. Clear numeric values for reach, angle and force simplify FEM checks and safety assessments: the difference between the maximum clamping force (3,000 N) and the maximum holding force (3,300 N) reflects how the device acts under dynamic and static conditions, respectively, and should be considered when calculating workpiece retention under cutting or handling loads. For dependable clamping from Kukamet, contact Metav Werkzeuge in Emmerich for exact application guidance and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitment and delivery options Technical data Article number: 611-4-D-C2 Brand: Kukamet Classification: eClass 21021004 ETIM: EC011973 Key figures Arm length: 150 mm Max clamping force: 3,000 N Max holding force: 3,300 N Operating angle: 95° Materials & features Material: galvanised steel Mounting: horizontal foot Type: pneumatic lever clamp Notable feature: massive holding arm FAQ What is the difference between clamping force and holding force for this clamp? Clamping force refers to the peak pneumatic force available during engagement (3,000 N), while holding force describes the static retention capacity after engagement (3,300 N) for the 611 Pneumatic Clamp from Kukamet. Is the clamp suitable for use in a corrosive workshop environment? Yes, the galvanised finish of the Kukamet 611 Pneumatic Clamp provides corrosion resistance suitable for standard workshop conditions, reducing maintenance frequency. How is the clamp mounted to a fixture or jig? The clamp is designed for horizontal foot mounting; the horizontal base is fixed to the fixture plate and the arm operates across the workpiece at a 95° angle. Can the pneumatic clamp be integrated into automated valve controls? Pneumatic actuation allows integration with standard air valves and control systems; the device’s consistent actuation profile supports automated cycle programming. What are the key physical features that provide stability under load? The clamp’s massive holding arm and galvanised construction ensure rigidity and resistance to torsion, providing stable support during machining and assembly operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Pneumatic Clamp With Vertical Handle And Massive Holding Arm, 3,000N Push / 3,300N Hold, 90° - Kukamet
Take advantage of the vertical handle and solid holding arm combined with a zinc‑plated, heavy‑duty build to secure repeatable clamping and reduce downtime; order the clamp directly via Metav Werkzeuge or consult the team for application advice. Pneumatic Clamp 651 — Kukamet, vertical handle and massive holding arm The Pneumatic Clamp 651 is a vertical‑foot pneumatic toggle clamp engineered for secure 90° workholding in production, assembly and fixture applications. Vertical handle with solid holding arm Zinc‑plated corrosion protection Max clamping force 3,300 N 90° clamping angle, 150 mm arm Improve repeatability with pneumatic actuation and robust mechanics The pneumatic actuation delivers consistent cycle‑to‑cycle performance, converting a piston force of 3,000 N into a maximum holding force of 3,300 N, which supports dependable repeatability in batch production. The vertical operating axis and vertical handle provide a compact actuation path that reduces variation during clamping, while the stiff solid holding arm resists deflection under load. This combination ensures fixtures remain true to datum, lowering rework rates and stabilising throughput. Built for long service life and straightforward integration Constructed from zinc‑plated material and fitted with a massive holding arm, the clamp resists corrosion and mechanical wear typical in workshop environments. The vertical foot mounting facilitates firm attachment to jig plates and fixture bases, while the 150 mm arm offers sufficient reach for most standard components without adding bulk. The 90° clamping angle simplifies part orientation in assembly processes, and the compact footprint aids integration into existing tooling layouts for minimal retrofitting effort. Faster cycles and safer handling to boost productivity Pneumatic operation shortens actuation times versus manual clamps, supporting higher cycle rates and smoother line balancing. The vertical grip design encourages ergonomic handling for manual set‑up or intermittent interventions, reducing operator fatigue. Robust construction reduces unplanned stoppages, and the clear mechanical action of the toggle design improves safety by offering predictable clamp behaviour under pressure. The clamp’s specification suits repetitive production where speed and reliability matter. For reliable production clamping choose the Kukamet Pneumatic Clamp 651—contact Metav Werkzeuge for specification support and fast supply from Emmerich. Technical data SKU: 651-4-H-D-C2 Product name: Pneumatic Clamp 651 Brand: Kukamet Facts Max piston force: 3,000 N Max holding force: 3,300 N Arm length: 150 mm Clamping angle: 90° eCl@ss: 21021004 ETIM: EC011973 Special features Material: zinc‑plated Vertical handle and solid holding arm Vertical foot mounting Robust construction for industrial use Designed for 90° clamping FAQ What clamping forces are available with this clamp? The Kukamet Pneumatic Clamp 651 (SKU 651-4-H-D-C2) provides a piston force of 3,000 N and a maximum holding force of 3,300 N, suitable for many production fixtures. How is the clamp mounted in a jig or fixture? The Pneumatic Clamp 651 is supplied for vertical foot mounting, enabling secure attachment to jig plates and fixture bases for stable workholding. Is the design suitable for harsh workshop conditions? The Kukamet Pneumatic Clamp 651 features a zinc‑plated finish and a massive holding arm, offering enhanced corrosion resistance and mechanical durability for industrial environments. Can this clamp be integrated into automated lines? The Pneumatic Clamp 651’s compact toggle design and pneumatic actuation support automated production lines where consistent, repeatable clamping is required Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Pneumatic Toggle Clamp Horizontal Base, Massive Holding Arm, 3,300N Hold Force, 3,000N Clamp Force, 95° Angle - Kukamet
Robust, zinc-plated construction and precise pneumatic actuation deliver consistent clamping and repeatable set-ups. With a 3,000 N piston force and a 3,300 N holding load, this device reduces rework and machine downtime; order directly via Metav Werkzeuge or ask their advisors for specification support. 631 Pneumatic Clamp — Zinc-plated, 3,000 N piston force The 631 is a heavy-duty pneumatic clamp designed for industrial workholding and workshop fixtures, featuring a horizontal base and a massive holding arm for reliable part securing Heavy-duty holding arm 3,000 N pneumatic clamping force Horizontal foot for stable mounting Consistent clamping force for repeatable production The pneumatic clamp design provides a controlled and rapid clamping action, delivering a 3,000 N piston force and a 3,300 N holding load that stabilises parts during machining, welding or assembly. This level of force contributes to steady cycle times and fewer interruptions for re‑adjustment; the pneumatic actuation allows faster set-up than manual alternatives while offering repeatability that supports quality assurance and process reproducibility. Stable mounting and corrosion-resistant durability A horizontal foot ensures a compact and secure mounting position on fixtures and machine tables, while the zinc-plated finish protects against corrosion in workshop environments. The 150 mm arm provides reach without compromising rigidity, and the solid holding arm construction resists deformation under load. The clamping angle of 95° maintains a consistent force vector, meaning components stay in the intended position throughout the process for cleaner joins and fewer rejects. Easy integration into existing jigs and fixtures Designed in the lever-clamp tradition, this model suits a wide range of setups in metalworking and general fabrication. The robust build simplifies retrofit into existing jigs and automation cells; electrical or pneumatic interfaces remain standard, so commissioning is straightforward. Supplied by Kukamet, the unit pairs mechanical simplicity with industrial durability, supporting continuous operation and predictable maintenance intervals for production environments. For procurement or technical clarification on the Kukamet 631 pneumatic clamp, please contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 for availability and integration advice Technical data Article number: 631-4-D-C2 Manufacturer: Kukamet Facts Maximum piston force: 3,000 N Maximum holding force: 3,300 N Arm length: 150 mm Angle: 95° ECLASS: 21021004 ETIM: EC011973 Special features Material: Zinc-plated Mounting: Horizontal foot Massive holding arm Massive arm: yes FAQ How much clamping force does the clamp provide? The Kukamet 631 pneumatic clamp delivers a piston force of 3,000 N and a holding force of 3,300 N, suitable for demanding workholding tasks. Can this clamp be mounted on existing fixtures? Yes. The horizontal foot design of the 631 enables straightforward integration into jigs and machine tables without major modifications. Is the clamp suitable for harsh workshop environments? The zinc-plated finish on the 631 provides corrosion resistance appropriate for normal workshop and production conditions. What is the effective reach of the clamping arm? The device features a 150 mm arm that balances reach and rigidity for a variety of part geometries. Does the clamp maintain a consistent clamping angle during operation? Yes. The clamp operates at a fixed 95° angle, ensuring a stable force direction and reliable part positioning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Pull Rod Clamp Size 5 With Small Angle Foot, Stroke 40mm, Hold Force 4500N - AMF
Take advantage of a compact, high-force clamping solution with a small angled foot and a maximum holding force of 4,500 N for reliable fixture operation; order directly via Metav Werkzeuge or consult our advisors for application support. AMF Push-rod Clamp No. 6841, Size 5 — small angled foot, 4,500 N holding force The AMF Push-rod Clamp No. 6841 is a compact push-rod clamp designed for fixture and workholding tasks where space is limited and consistent clamping force is required. Size 5 push-rod clamp Max clamping force 4,500 N 40 mm stroke for secure clamping Small angled foot for compact setups Consistent clamping power for reproducible processes The clamp delivers a maximum clamping force of 4,500 N, ensuring reproducible hold in repetitive operations. The integrated 40 mm stroke permits reliable engagement across variable workpiece heights, while the standard M12 x 50 pressure screw enables straightforward force transmission. These specifications support process stability and reduce rework, which in turn contributes to predictable cycle times and lower scrap rates. Compact mounting that optimises fixture layouts Thanks to the small angled foot, this clamp is suitable for tight jigs and assemblies where clearance is at a premium. The compact footprint allows for denser tool placement without sacrificing accessibility for loading and unloading. The design therefore supports efficient use of machine table real estate and simplifies fixture design for short-run and batch production. Robust mounting and straightforward integration into assemblies The unit includes a mounting thread M24 x 1.5 and metric attachment points that comply with common shop standards, easing installation into existing tooling plates. The durable mechanical concept is intended to withstand frequent actuation without complex maintenance, helping to keep machine downtime to a minimum. Spare parts such as the pressure screw are metric and readily replaceable, supporting long-term serviceability. Suitable applications and target environments This clamp is engineered for fixture building, general workholding and assembly fixtures in manufacturing environments that require compact, high-force clamping. The size and force characteristics make it suitable for metalworking jigs, testing rigs and production tooling where a secure, repeatable clamp is needed but space is restricted. The performance values support placement in both manual and automated stations. For robust, compact clamping choose AMF and contact Metav Werkzeuge in Emmerich for stock information and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 4000833519NW Type: 6841 Brand: AMF Product type: Push-rod clamp Execution: with small angled foot Packaging unit: 1 Facts Max clamping force: 4,500 N Holding force max: 4,500 N Stroke: 40 mm Pressure screw: M12 x 50 Size: 5 A: 16 mm B min: 41.5 mm B max: 81.5 mm D: 8.5 mm E: 50 mm H: 30 mm H1: 129.5 mm K: 15.5 mm L1: 171.5 mm L2: 25 mm M min: 29 mm M max: 46 mm M2: M24 x 1.5 N: 65 mm P: 35 mm Special features Small angled foot Size 5 Pressure screw M12 x 50 M24 x 1.5 mounting thread Compact design for tight fixtures FAQ What maximum clamping force does this clamp provide? The AMF Push-rod Clamp No. 6841 (SKU 4000833519NW) provides a maximum clamping force of 4,500 N. What is the available stroke of the clamping rod? The clamping rod has a stroke of 40 mm, allowing compensation for varying workpiece heights. Which pressure screw is fitted to the clamp? The unit is supplied with a pressure screw M12 x 50 for force transmission. How is the clamp mounted in a fixture? Mounting is via an M24 x 1.5 thread and standard metric interfaces compatible with common tooling plates. For which applications is this clamp intended? It is designed for fixture building, general workholding and assembly fixtures where compact dimensions and high holding force are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamp No. 6842 Heavy Duty Tension/Compression 10,000 N Holding Force, 40mm Stroke - AMF
Benefit from a heavy‑duty, size 5 push‑rod clamp offering a 10,000 N clamping capacity and a 40 mm stroke for secure axial holding; order the push‑rod clamp directly via Metav Werkzeuge or contact our consultants for application advice. Push‑rod clamp No. 6842 — heavy duty, size 5 (AMF) The Push‑rod clamp No. 6842 is a heavy‑duty push/pull rod clamp designed for secure axial clamping in jigs, fixtures and repetitive production processes. Heavy‑duty design, size 5 Up to 10,000 N clamping force 40 mm stroke length M12 x 50 pressing screw Reliable axial clamping that reduces setup risk The rod clamp delivers a 10,000 N rated clamping force with a 40 mm stroke, providing consistent axial holding for production and assembly tasks. This performance translates into shorter cycle times and reduced rework, because the component is held securely during machining or joining operations. The design focuses on predictable force transmission and repeatability, so fixtures remain stable under load and downtime from loose workpieces is minimised. Robust construction for continual industrial use Built as a heavy execution in size 5, the unit is suited to demanding shop‑floor conditions. The clamp uses an M12 x 50 pressing screw and features adjustable mounting ranges (B min 58 mm, B max 98 mm) to accommodate different fixture geometries. These measurable dimensions simplify integration into modular tooling and make design verification straightforward when planning nests or dedicated fixtures. The combination of a compact footprint and clearly specified dimensions supports fast retrofitting into existing setups. Faster integration and dependable operation in production Integration is streamlined by clear, measurable geometry such as L1 174 mm and a consistent holding force 10,000 N, which aid layout calculations for indexing and movement clearance. The push/pull principle ensures a positive mechanical action for both pressing and withdrawing, which reduces adjustment needs and improves operator confidence. Reliable clamping contributes to higher first‑pass yield and a more efficient workflow on the shop floor, while the compact heavy‑duty design preserves valuable bench or fixture space. Contact Metav Werkzeuge for tailored procurement and technical guidance to secure the AMF push‑rod clamp No. 6842 for consistent, heavy‑duty fixture clamping. Technical data SKU: 4123680150NW Type: 6842 Product: Push‑rod clamp Brand: AMF Version: heavy Packaging unit: 1 Facts Max clamping force: 10,000 N Holding force: 10,000 N Stroke: 40 mm Pressing screw: M12 x 50 A: 16 mm B min: 58 mm B max: 98 mm C: 41 mm D: 8.5 mm E: 50 mm H: 38 mm H1: 137.5 mm K: 45 mm L1: 174 mm M min: 41 mm M max: 50 mm N: 71 mm P: 121 mm Special features Heavy duty execution, size 5 Push/pull operation Size designation: 5 M12 x 50 pressing screw FAQ What maximum clamping force does this clamp provide? The push‑pull rod clamp provides a maximum clamping force of 10,000 N; this is stated for the Push‑rod clamp No. 6842 (AMF, SKU 4123680150NW). What is the available stroke and how does it affect fixture design? The unit offers a 40 mm stroke, which allows for sufficient travel to accommodate workpiece tolerances and movement in fixtures when using the Push‑rod clamp No. 6842 (AMF). Which dimensions are most relevant for integrating the clamp into a jig? Key dimensions include L1 174 mm, B min 58 mm and B max 98 mm; these values support precise placement and mounting within fixture layouts using the AMF clamp. Is the clamp suitable for continuous production cycles? Yes, the heavy execution and rated holding force make the AMF push‑rod clamp No. 6842 suitable for repetitive industrial use, offering consistent performance in production environments. What fixing thread is used for the pressing screw? The pressing screw specification is M12 x 50, which simplifies replacement and integrates with standard fastening components for the AMF clamp. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamp Size 2 Small Angle Foot M6 Pressure Screw 2,000N Holding Force - AMF
Take advantage of a compact clamping solution that delivers 2,000 N holding force with a 26 mm stroke and a space-saving angled foot for flexible fixture layouts — order directly via Metav Werkzeuge or request advice from our consultants to ensure immediate integration into existing setups. AMF Push‑rod Clamp No. 6841 (Size 2) – small angled foot, 2,000 N holding force The AMF Push‑rod Clamp No. 6841 is a compact push‑rod clamping unit designed for medium‑duty fixturing, featuring a small angled foot that enables low-profile installation in confined work areas. Compact size small angled foot 2,000 N maximum holding force 26 mm stroke for secure clamping M16×1.5 threaded mount High clamping performance for reliable production flow The clamp provides a consistent maximum clamping force of 2,000 N, ensuring secure fixation during machining and assembly operations. With a 26 mm stroke and robust kinematics, the mechanism converts axial actuation into reliable clamp travel, supporting repeatable positioning and reduced rework. The technical design focuses on measurable performance so planners and purchasing can compare fixtures on objective criteria rather than subjective claims. Space‑saving mounting and straightforward integration The small angled foot reduces the required mounting envelope, allowing the unit to be fitted where vertical clearance is limited. Threaded mounting via M16×1.5 and the included contact screw M6×25 simplify attachment to plates and sub‑frames. Dimensional data such as A = 10 mm, B min = 32.5 mm to B max = 58.5 mm and L1 = 114 mm support precise CAD integration and ensure the clamp can be positioned without redesigning existing jigs. Robust operation and low maintenance for workshop reliability Constructed for frequent actuation and consistent holding force, the clamp requires minimal upkeep while delivering predictable behaviour over service life. The angled foot design helps protect the actuation elements from direct chip flow in many setups. Specified adjustment ranges (M min = 31.8 mm, M max = 36 mm) provide tolerance compensation during assembly, reducing setup time and supporting higher first‑time‑right rates on the shop floor. Contact Metav Werkzeuge for specification matching or to arrange delivery: info@metav-werkzeuge.com | +49 2822 7131930 — our consultants will advise on fixture planning and compatibility with existing equipment. Technical data Article number: 4000833517NW Type: 6841 Designation: Push‑rod clamp No. 6841 Size 2, small angled foot Manufacturer: AMF Product type: Push‑rod clamp Packaging unit: 1 Facts Maximum clamping force: 2,000 N Maximum holding force: 2,000 N Stroke (Hub): 26 mm A: 10 mm B min: 32.5 mm B max: 58.5 mm D: 5.6 mm E: 20 mm H: 20 mm H1: 85.5 mm K: 12.5 mm L1: 114 mm L2: 19 mm M min: 31.8 mm M max: 36 mm M2: M16×1.5 N: 50 mm P: 34 mm Special features Execution: with small angled foot Size: 2 Contact screw: M6×25 Type designation: 6841 Compact mounting footprint FAQ What is the maximum clamping force of this clamp? The AMF Push‑rod Clamp No. 6841 provides a maximum clamping force of 2,000 N, specified for consistent holding during common fixturing tasks. What stroke does the clamp offer and how does it affect fixture design? The clamp has a 26 mm stroke; this travel allows secure engagement and tolerance compensation within the stated M min/M max range, aiding precise fixture layout. Which mounting thread is required for installation? Mounting uses an M16×1.5 threaded interface (M2) and the unit includes a contact screw specified as M6×25 for local adjustments. Is the clamp suitable for tight installation spaces? Yes, the small angled foot reduces the vertical and lateral mounting envelope, making the unit suitable for restricted or compact fixture designs. How is repeatability and maintenance handled for this product? The clamp is engineered for frequent actuation with minimal routine maintenance; its mechanical design prioritises repeatable holding force and long‑term reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamp Type 6841 With Small Angle Foot, 2,500 N Holding Force - AMF
Reliable clamping with a compact footprint and straightforward adjustment reduces set-up time and increases throughput. The combination of a 2,500 N clamping capability and a 32 mm stroke delivers secure holding and repeatable operation; order the Push-rod clamp No. 6841 directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp No. 6841 (size 3) — small angled foot, 2,500 N, 32 mm stroke — AMF The Push-rod clamp No. 6841 offers robust, space-saving holding for jigs and fixtures in machining and assembly, supplied with a small angled foot for compact installation. High clamping force 2,500 N 32 mm stroke for secure positioning Compact small angled foot design M8 x 35 pressure screw included Secure hold for repetitive production tasks The push-rod clamp design converts linear movement into a reliable clamping action, providing a maximum clamping and holding force of 2,500 N which reduces part movement and rework during machining. This performance is especially valuable in series production or fixture-heavy work where consistent force equals fewer rejects. The specified 32 mm stroke offers a balance between reach and rigidity, allowing the clamp to engage securely even with varying part heights while maintaining a compact presence in the fixture layout. Compact installation with adjustable reach A small angled foot allows mounting where vertical space is limited and gives the clamp a compact footprint on the workpiece. The adjustable dimensions — including a variable B range (min 37 mm to max 69 mm) and M min/max (29.5 mm–42.5 mm) — enable flexible positioning and easy adaptation to different part geometries. This adjustability permits faster changeovers and a simpler setup process, translating into measurable time savings on the shop floor without sacrificing clamping reliability. Simple fastening and repeatable operation Fitting and adjustment are straightforward thanks to the supplied M8 x 35 pressure screw and a threaded connection of M20 x 1.5, which ensure repeatable preload and quick replacement if required. The clamp’s dimensions (for example L1 140 mm, H1 108 mm) support predictable integration into existing fixtures. The straightforward mechanical function demands minimal maintenance, supporting a high degree of uptime and consistent precise clamping over long production runs. Secure reliable clamping with AMF’s Push-rod clamp No. 6841 — contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833518NW Type: 6841 Product: Push-rod clamp with small angled foot Manufacturer: AMF Core dimensions Stroke: 32 mm A: 12 mm B min: 37 mm B max: 69 mm D: 6.5 mm E: 30 mm H: 25 mm H1: 108 mm K: 13 mm L1: 140 mm L2: 22 mm M min: 29.5 mm M max: 42.5 mm Thread (M2): M20 x 1.5 N: 60 mm P: 30 mm Max clamping/holding force: 2,500 N Design and features With small angled foot Pressure screw: M8 x 35 Packaging unit: 1 Size designation: 3 FAQ What maximum clamping force does this clamp provide? The clamp delivers a maximum clamping and holding force of 2,500 N with the Push-rod clamp No. 6841 from AMF (SKU 4000833518NW). Is the clamp suitable for fixtures with limited vertical space? Yes, the small angled foot and compact dimensions of the AMF Push-rod clamp No. 6841 make it suitable for installations with restricted vertical clearance. Which adjustment ranges are available for different part sizes? Adjustable ranges include B from 37 mm to 69 mm and M from 29.5 mm to 42.5 mm, enabling flexible positioning in various fixture designs. What fastening parts are supplied or required for installation? The unit is specified with an M8 x 35 pressure screw and a threaded connection of M20 x 1.5 for secure attachment and repeatable preload. Is the clamp appropriate for series production environments? Its repeatable mechanical action, simple maintenance requirements and robust clamping force make the Push-rod clamp No. 6841 well suited to series production and repetitive machining tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamp With Spring, Horizontal Foot, 1100N Closing Force - Kukamet
Take advantage of a robust, galvanised push-rod clamp with a spring-loaded return and a horizontal-foot mount to speed up fixture set-up and ensure repeatable holding in production. Order the clamp directly via Metav Werkzeuge or consult Metav's advisors for specification support. 511 Push-rod clamp — Kukamet spring-loaded linear clamping, galvanised 511 Push-rod clamp designed for linear clamping applications in jigs and fixtures, with a spring return and a horizontal foot for stable mounting Galvanised finish for corrosion resistance Spring-loaded mechanism for consistent clamping Horizontal-foot mounting for stable attachment Clamping force 1,100 N; holding force 1,160 N Fast, repeatable linear clamping to increase throughput A push-rod clamp delivers straight-line clamping force without lateral movement, which reduces set-up time for repeat operations and shortens cycle times on small-series production. The spring-loaded mechanism ensures the actuator returns reliably, maintaining consistent pressure between cycles and lowering the risk of workpiece movement. For production environments where repeatability and speed matter, this linear clamp contributes to predictable fixture behaviour and fewer rejects. Durable construction for workshop and shopfloor use The body is galvanised, providing a corrosion-resistant surface suitable for general workshop environments and damp conditions. The horizontal-foot mounting offers stable attachment to plates and jig bases, simplifying integration into existing fixtures without additional adapters. Low maintenance is achieved through simple mechanical design: regular inspection and basic lubrication keep the clamp serviceable, while the compact mass supports easy handling during jig assembly and modification. Practical benefits for fabrication, milling and assembly tasks Designed for fixture builders, assembly shops and metalworking benches, the clamp brings tangible operational advantages: consistent holding force reduces rework, and the compact footprint helps maximise available workspace. The combination of a reliable return spring and defined clamping and holding values makes the device suitable where controlled linear pressure is required. Integration into modular fixture systems is straightforward, helping to centralise tooling procurement and improve workshop efficiency. For dependable linear clamping in production or jigs, choose the Kukamet 511 via Metav Werkzeuge; Metav Werkzeuge can advise on suitability and delivery—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 511-3-Y GTIN: 8680731506099 eClass: 21041716 Manufacturer: Kukamet Facts Weight: 0.47 kg Clamping force (max): 1,100 N Holding force (max): 1,160 N Special features Material: galvanised Spring-loaded mechanism Mounting: horizontal foot Product type: push-rod clamp FAQ What is the primary function of this clamp? The 511 push-rod clamp (Kukamet) provides linear clamping for jigs and fixtures, delivering defined clamping and holding forces for repetitive operations. Can the clamp be mounted on a jig plate? Yes, the horizontal-foot mounting is designed for stable attachment to jig plates and fixture bases for secure integration. Is the surface protected against corrosion? The clamp is galvanised, giving corrosion resistance suitable for general workshop use. What forces can be expected from the clamp? The device offers a clamping force of 1,100 N and a holding force of 1,160 N, values intended for reliable positioning and secure fastening. Is the clamp suitable for repetitive production cycles? The spring-loaded mechanism ensures reliable return and consistent clamping pressure, making the clamp suitable for repetitive cycle work. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Push Rod Clamping Cylinder Heavy Duty Push/Pull Clamp 4000 N, 32mm Stroke - AMF
Take advantage of a robust combination of heavy-duty push/pull actuation and 4,000 N holding power to secure reliable clamping in repetitive production tasks; the compact Size 3 design with a 32 mm stroke simplifies integration and reduces setup time. Order directly via Metav Werkzeuge or contact their consultants for technical clarification. AMF Push-Pull Clamp No. 6842, Size 3 — Heavy-duty push/pull clamping The AMF Push-Pull Clamp No. 6842 (Size 3) is a heavy-duty push/pull clamping element designed for industrial workholding where consistent actuation and secure holding are essential. Heavy-duty push-pull design Max clamping force 4,000 N 32 mm stroke for positive actuation Adjustable clamping range 40–72 mm Reliable clamping force for continuous production The device delivers a maximum clamping and holding force of 4,000 N, offering predictable performance for repetitive operations and automated sequences. The robust actuation ensures consistent contact pressure across cycles, reducing the need for frequent rechecking and lowering downtime. With its 32 mm stroke, the mechanism provides sufficient travel for secure engagement while keeping movements compact; this helps maintain cycle efficiency and repeatability on production lines where space and timing are critical. The heavy-duty construction supports stable clamping under regular industrial loads and contributes to process reliability. Flexible adjustment for varied setups An adjustable clamping range from 40 mm to 72 mm enables adaptation to different workpiece thicknesses without complex modification. The integrated pressure/adjustment screw M8 x 35 allows fine calibration of contact pressure, enabling precise positioning and secure fixation. These measurable settings mean fixtures can be aligned quickly and reproducibly, which shortens changeover times and simplifies jig design. Clear numerical values such as A = 12 mm, C = 41 mm and L1 = 139 mm assist planners in checking fitment in CAD layouts or on bespoke fixtures before installation. Compact footprint with straightforward integration The compact dimensions and organised geometry make mounting and integration into assemblies straightforward. Key dimensional references—H1 = 116 mm, N = 60 mm, P = 95 mm—support accurate space planning and ensure the clamp fits into confined fixtures. The heavy execution keeps the mechanism robust without excessive bulk, so the unit can be placed close to the workpiece for direct force application. Where repeatability and minimal setup are priorities, this push/pull element provides a dependable balance between size and performance. Durable design that supports process quality Built for repetitive industrial use, the clamp’s heavy design and clear mechanical parameters promote long service intervals and consistent results. The push and pull functionality allows reversible actuation, which is useful in applications requiring both applied force and retention. By relying on fixed, measurable properties rather than adjustments by feel, the clamp helps establish reproducible clamping routines that support quality assurance across batches. For integration advice or to secure supply of the AMF heavy-duty push-pull clamp, contact Metav Werkzeuge in Emmerich — their specialists provide technical support and reliable delivery from stock via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4123680130NW Type: 6842 Product: Push-pull clamp Execution: heavy Manufacturer: AMF Packing unit: 1 UID: 4123680130NW Facts Max clamping force: 4,000 N Max holding force: 4,000 N Stroke: 32 mm A: 12 mm B min: 40 mm B max: 72 mm C: 41 mm D: 6.5 mm E: 30 mm H: 30 mm H1: 116 mm K: 28 mm L1: 139 mm M min: 36 mm M max: 44 mm N: 60 mm P: 95 mm Pressure screw: M8 x 35 mm Special features Size: 3 Heavy-duty design Push and pull clamping function Adjustable clamping range 40–72 mm Pressure/adjustment screw M8 x 35 Brand: AMF FAQ What is the maximum clamping force of this clamp? The AMF Push-Pull Clamp No. 6842 (SKU 4123680130NW) provides a maximum clamping and holding force of 4,000 N, suitable for many heavy-duty workholding tasks. What stroke and travel adjustments does the clamp offer? The unit features a 32 mm stroke and an adjustable clamping range from 40 mm to 72 mm, with a pressure screw specified as M8 x 35 for fine adjustment. Which size is this push-pull clamp and why does size matter? This is Size 3; size indicates the physical class and typical force capacity, helping fixture designers select an appropriately proportioned clamp for the intended load and available installation space. How does the clamp support repeatable positioning in fixtures? Measured parameters such as A = 12 mm, L1 = 139 mm and defined stroke and adjustment ranges ensure fixtures can be set up with predictable geometry, aiding reproducible clamping and consistent part quality when using the AMF Push-Pull Clamp No. 6842. Is the clamp suitable for reversible actuation requirements? Yes, the push and pull function of the heavy execution enables reversible actuation, allowing both application of force and retention in automated or manual clamping scenarios. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pusher Clamp Type 6845 Pressure Clamp Size 3, Max Force 4000 N - AMF
Benefit from a compact, high‑force clamping solution that delivers 4,000 N of holding power and a fitted M8 x 35 pressure screw for repeatable setup. Order directly via Metav Werkzeuge or request application advice from our consultants. AMF Pushrod Clamp No. 6845, Size 3 — Pressure clamp with 4,000 N clamping force The AMF Pushrod Clamp No. 6845, Size 3 is a compact pressure clamp engineered for secure workpiece retention in fixtures and jigs across machining and assembly tasks. Compact Size 3 design Max. clamping force 4,000 N M8 x 35 pressure screw included Stable clamping force for reliable machining results The device provides a 4,000 N maximum clamping force, which ensures secure retention of components during cutting, drilling or assembly. High clamping force reduces vibration and movement, lowering the risk of burrs or rework and improving cycle reliability. For users unfamiliar with force metrics: 4,000 N corresponds to a robust hold suitable for many medium‑duty fixture applications, enabling shorter set‑up times and steadier process parameters. Space‑efficient Size 3 body improves fixture design The Size 3 format places a premium on footprint without sacrificing performance. Its compact body allows integration into tight fixture layouts, freeing up space for additional tooling or multiple clamps on a single plate. The small envelope supports more compact clamping arrays and can simplify CNC table layouts, contributing to higher machine utilisation and a neater, more ergonomic workstation. Precise adjustment with the M8 x 35 pressure screw Equipped with an M8 x 35 pressure screw, the clamp permits fine mechanical adjustment and consistent contact pressure. The standard thread size facilitates easy replacement or aftermarket upgrades and ensures compatibility with common tooling hardware. Repeatable adjustment helps maintain consistent clamping force across batches, decreasing inspection variance and improving throughput quality. Ready for integration and dependable supply Delivered as a single unit (packaging unit 1) and identified by SKU 4000604385NW, the pressure clamp is straightforward to specify in bills of materials and procurement lists. Sourcing through an experienced distributor provides the assurance of steady availability and quality control; Metav Werkzeuge combines warehouse logistics with a European quality filter to simplify procurement and sustain production continuity. For applications requiring dependable fixture clamping choose the AMF pushrod clamp No. 6845 and contact Metav Werkzeuge for stock information, technical advice and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000604385NW Type: 6845 Product: Pushrod clamp Execution: Pressure clamp Manufacturer: AMF Facts Max. clamping force: 4,000 N Size: 3 Pressure screw: M8 x 35 Packaging unit: 1 Special features Compact design for tight fixtures Repeatable mechanical adjustment via pressure screw Suitable for machining and assembly fixture use FAQ What clamping force does this clamp provide? The AMF pushrod clamp No. 6845 delivers a maximum clamping force of 4,000 N, offering secure retention for medium‑duty fixture applications. Is the pressure screw replaceable or standardised? Yes, the clamp uses a standard M8 x 35 pressure screw, which can be replaced with compatible M8 hardware if required. Can this clamp be integrated into compact fixture layouts? The Size 3 body is designed for space‑saving installation, allowing multiple clamps to be arranged on small plates or tight work areas. How is the product supplied for ordering and specification? The item is supplied as a single unit (packaging unit 1) and is listed under SKU 4000604385NW for straightforward procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pushrod Clamp Horizontal Base M4x25 Pressure Spindle 550N, 700N Holding Force, Metal Handle - Kukamet
Compact, durable clamping in a small footprint: the combination of a black oxide finish, a metal handle and a reliable 550 N clamping force delivers secure, repeatable holding for jigs and fixtures. Order the Push-rod clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Push-rod clamp 511 — Kukamet push-rod clamp with horizontal foot and metal handle The Push-rod clamp 511 is a compact horizontal-foot clamping device designed for secure holding in fixture and jig applications where space and repeatability matter. Horizontal foot for secure mounting Metal handle for durable operation Black oxide finish for rust resistance 550 N clamping force, 700 N holding force Secure, measurable clamping for repeatable processes The compact design of this rod clamp offers a consistent clamping force of 550 N with a maximum holding force of 700 N, providing measurable performance for production and assembly tasks. The horizontal-foot mounting reduces lateral profile and enables installation in tight fixture layouts; the pressed M4x25 pressure spindle allows fine adjustment of contact pressure and compensates for small workpiece tolerances. These technical specifications translate into predictable part registration and reliable cycle-to-cycle behaviour, supporting process stabilisation and reduced rework rates. Quick set-up and straightforward adjustment to speed workflows Designed for fast integration into jigs and small assemblies, the unit’s metal handle and ergonomic lever action permit swift engagement and disengagement. The horizontal foot base simplifies alignment and secures the clamp to rails or plates without complex adapters. The M4x25 pressure spindle is standard tooling size, enabling simple replacement or adjustment with common workshop tools; this reduces downtime during set-up and maintenance, and supports a leaner workflow on the shop floor. Durable finish and low maintenance for heavy-duty shop use A black oxide finish provides practical corrosion resistance while keeping the surface non-reflective and abrasion resistant in daily use. Constructed with robust materials and a metal gripping element, the clamp withstands repetitive cycles with minimal upkeep. At just 0.087 kg, the device has a low mass that minimises dynamic impact on delicate assemblies yet retains the stiffness required for consistent clamping, making it suitable for both light production lines and precision fixture work. Practical benefits that matter to the workshop Beyond raw figures, the clamp’s form factor delivers a small footprint that frees table space and allows closer part nesting in fixtures. The precise pressure adjustment via the M4x25 spindle enables controlled contact force without guesswork, which is especially useful when working with sensitive or finely finished components. The overall combination of compactness, clearly defined force values and durable construction supports faster set-up, predictable production runs and lower handling risk. For secure and compact fixturing, request the Kukamet Push-rod clamp 511 through Metav Werkzeuge; Metav’s specialists are available for technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: B511-0-M GTIN: 8680731508680 Manufacturer: Kukamet Material/finish: black oxide finish Weight: 0.087 kg Datasheet: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/texts/93/da/15/63/6315da932af694c3544977ee/511-katalogseite.pdf Facts Max clamping force: 550 N Max holding force: 700 N Pressure spindle: M4x25 Mounting type: horizontal foot Special features Metal handle Black oxide finish Compact design for fixtures and jigs Catalogue image available FAQ What clamping and holding forces does the clamp provide? The Kukamet Push-rod clamp 511 delivers a clamping force of 550 N and a holding force of 700 N, values that support reliable part retention in fixtures. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, making the clamp suitable for installation on plates or rails where a low profile is required. What is the adjustment mechanism for contact pressure? An M4x25 pressure spindle is fitted for fine adjustment of contact pressure, allowing precise setting without specialised tools. Is the finish suitable for workshop environments? The clamp features a black oxide finish that provides practical corrosion resistance and reduced surface glare for everyday shop use. How heavy is the clamp and does that affect handling? The unit weighs 0.087 kg, offering a low mass that makes placement and integration into fixtures straightforward while maintaining clamping stiffness. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Pushrod Clamp Short Form With M6 Pressure Screw, 21.5mm Stroke, 1000N Holding Force - AMF
Take advantage of the compact short design and 1,000 N clamping capacity for dependable securing in confined fixtures; the 21.5 mm stroke and standard thread interfaces ensure straightforward integration. Order directly via Metav Werkzeuge or contact our consultants for application advice. AMF 6844 Rod Clamp (Size 2) — Short Design, 1,000 N Holding Force The AMF 6844 rod clamp (size 2, short version) is a compact clamping device designed for fixtures and jigs where space is restricted, offering a robust solution for repeatable positioning and holding. Short design for confined spaces 1,000 N clamping force 21.5 mm stroke for secure positioning Space-saving clamping that keeps workflows tight and accurate The short-configuration rod clamp is optimised for setups where clearance is limited. Thanks to its short design and size 2 form factor, the clamp can be mounted closer to the workpiece without obstructing tools or measurement probes. This compact layout reduces fixture height and simplifies stacking on multi-level jigs, resulting in a more ergonomic work envelope and less rework. The reduced footprint therefore supports faster part changes and a neater machine table. Predictable force and consistent hold for secure processing Engineered to deliver a maximum clamping force of 1,000 N, the device provides reliable retention during machining and assembly operations. The 21.5 mm stroke describes the effective travel of the pressure element; this travel range allows controlled contact and compensates for minor workpiece height variation. The pressure screw is specified as M6 x 25, providing a familiar adjustment interface that can be set and locked for repeatable pressure. Such characteristics translate into fewer rejects and improved process stability. Straightforward integration with standard threads and compact mounting Installation is facilitated by standardised threads and clear dimensional references: the clamp includes mounting interfaces compatible with M6 and M16x1.5 fittings and presents defined reference dimensions for alignment. These mechanical standards simplify retrofitting into existing jigs or new fixture designs and reduce the need for special adaptors. The short stroke combined with conventional thread sizes enables quick assembly, straightforward replacement and modest upkeep demands, supporting continuous production with minimal downtime. For robust, compact clamping choose the AMF 6844 — contact Metav Werkzeuge in Emmerich for availability and tailored integration advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4123665200NW Type: 6844 Label: Schubstangenspanner Nr.6844 Gr.2 kurz AMF Product type: Rod clamp Manufacturer: AMF Design: Short version Core data Maximum clamping force: 1,000 N Maximum holding force: 1,000 N Stroke (Hub): 21.5 mm Pressure screw: M6 x 25 A: 10 mm B: 36 mm E: 15 mm H1: 73 mm HW min.: 17 mm HW max.: 25 mm L1: 68.5 mm L2: 13 mm L3: 68 mm M: M6 M2: M16x1.5 N: 30.5 mm Packaging unit: 1 Special features Short design for confined applications Size: 2 Standard thread interfaces (M6, M16x1.5) Defined dimensional references for fixture integration Compact stroke for precise contact control FAQ What is the maximum clamping force of this rod clamp? The AMF 6844 rod clamp provides a maximum clamping force of 1,000 N, suitable for many light to medium-duty fixturing tasks. How much stroke does the clamp offer and what does that mean? The device offers a 21.5 mm stroke, which is the effective travel of the pressure element; this allows compensation for minor height differences and ensures controlled contact with the workpiece. Which threads are provided for mounting and adjustment? Mounting and adjustment use standard threads: the pressure screw is M6 x 25, and an additional mounting thread is M16x1.5, enabling easy integration into conventional jigs. Is the short design suitable for automated or multi-level fixtures? Yes, the short configuration of the clamp makes it particularly suitable for multi-level or automated fixtures where space above the workpiece is constrained. What dimensions are relevant for fixture planning? Key reference dimensions include A 10 mm, B 36 mm, H1 73 mm and N 30.5 mm; these should be used when designing the fixture to ensure proper alignment and clearance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Rod Clamp No Angle Base Size 2 M6 Pressure Screw 2,000 N - AMF
Benefit from a compact, installation-friendly clamp that delivers a reliable 2,000 N holding force and a 26 mm stroke, combined with a secure M16×1.5 mounting thread; order the AMF push‑rod clamp directly via Metav Werkzeuge or consult our specialists for application support. AMF Push‑Rod Clamp No. 6840, Size 2 — Compact 2,000 N Clamping Force The AMF Push‑Rod Clamp No. 6840, Size 2 is a compact clamping element designed for fixtures and jigs, supplied without an angled foot for flexible mounting positions. Compact Size 2 with 26 mm stroke Maximum clamping force 2,000 N M16×1.5 main thread for secure mounting Supplied without angled foot for flexible set-up Save space without sacrificing holding power The compact design of this clamp provides a small installation footprint while delivering a high holding force of 2,000 N. The 26 mm stroke allows reliable axial motion for controlled clamping and unclamping cycles, making it suitable for confined fixtures and automated cells. The short travel combined with a robust mechanical transmission supports repeatable clamping, reducing rework and increasing process stability in production environments. Fast integration and simple adjustment for production use Mounting is straightforward via the M16×1.5 main thread and the clamp features an M6×25 pressure screw for fine contact adjustment. These standard interfaces enable rapid integration into existing tool plates and bespoke fixturing, while the absence of an angled foot gives freedom in orientation and placement. The mechanical design aims for low maintenance and predictable behaviour during repetitive cycles, supporting smoother set‑up times and faster changeovers. Robust function that improves workflow and quality Engineered for fixture applications, the push‑rod design converts axial movement into secure clamping force with minimal play. The result is consistent clamping force and superior positional accuracy for workpieces during machining or assembly. For workshops and production departments that prioritise throughput and consistency, this clamping element helps shorten cycle times and supports higher first‑time‑right rates, contributing to an efficient and reliable production flow. For reliable fixture clamping with a proven 2,000 N holding force, contact Metav Werkzeuge for expert advice on the AMF push‑rod clamp No. 6840 — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 4000604393NW Type: 6840 Product: Push‑rod clamp No. 6840, Size 2 Manufacturer: AMF Packaging unit: 1 Facts Max clamping force: 2,000 N Max holding force: 2,000 N Stroke (Hub): 26 mm Pressure screw: M6×25 Main thread: M16×1.5 A: 10 mm B min: 20 mm; B max: 46 mm E: 20 mm; H1: 66 mm HW min: 17 mm; HW max: 25 mm L1: 114 mm; L2: 19 mm; L3: 105 mm N: 22 mm Special features Size: 2 Supplied without angled foot Type designation: 6840 Compact push‑rod clamping element FAQ What is the maximum clamping force of this clamp? The AMF push‑rod clamp No. 6840 provides a maximum clamping force of 2,000 N (SKU 4000604393NW). What stroke does the clamp offer and how does it affect use? The clamp features a 26 mm stroke, which gives controlled axial travel for secure contact and is well suited to compact fixtures where installation space is limited. How is the clamp mounted to a fixture plate? Mounting is by the M16×1.5 main thread; the clamp also includes an M6×25 pressure screw for contact adjustment to match component geometries. Can the clamp be used in automated systems? Yes, the mechanical push‑rod design and standard thread interfaces make this clamp suitable for integration into automated fixturing and pick‑and‑place systems where repeatable clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Rod Clamp No Angle Base Size 3 M8x35 32mm Stroke 2500N Holding Force - AMF
Take advantage of robust 2,500 N clamping capacity and a 32 mm stroke for dependable workpiece retention in medium‑duty fixtures; the compact Size 3 design without an angled base keeps setups slim while allowing secure actuation via the M20x1.5 thread. Order the AMF Push‑rod Clamp No. 6840, Size 3 directly via Metav Werkzeuge or ask our consultants if needed. AMF Push‑rod Clamp No. 6840, Size 3 — 2,500 N clamping, 32 mm stroke The AMF Push‑rod Clamp No. 6840, Size 3 is a compact industrial clamp for secure, repeatable workpiece holding in fixtures and machining jigs, supplied without an angled base for flexible mounting. 2,500 N clamping force 32 mm stroke M20x1.5 threaded actuator Compact Size 3, no angled base Consistent clamping performance that improves cycle stability The push‑rod unit delivers a clamping force of 2,500 N, engineered to maintain secure contact during machining or assembly operations. High, repeatable holding values reduce the need for rechecks between cycles and therefore contribute to shorter overall process times. The linear actuator arrangement with a 32 mm stroke gives a practical travel range for typical fixture tolerances, ensuring consistent pressure application across varied workpiece heights and minimising setup adjustments. Space‑saving design for versatile fixture layouts A small footprint and the absence of an angled base allow the clamp to be integrated into confined jigs or banked fixture plates without compromise. The mechanical interface is prepared for a M20x1.5 threaded connection and includes a thrust screw of M8 x 35, enabling straightforward mechanical fixing and straightforward connection to existing tooling assemblies. The slim profile supports denser station layouts while retaining the mechanical integrity required in production environments. Low‑maintenance construction for reliable uptime Built for repetitive operation, the clamp’s mechanical principle emphasises durability and simple servicing. The robust construction minimises wear on moving parts and keeps maintenance intervals long, which supports predictable production planning. Where quick checks are required, readily measurable parameters such as stroke and thread engagement allow rapid visual inspection and straightforward corrective action without specialist tools. Practical applications and compatibility in workshop use Ideal for medium‑duty clamping tasks in metalworking fixtures, assembly jigs and test rigs, the unit adapts to a range of production tasks thanks to the adjustable working height (B min 24 mm – B max 56 mm) and a defined approach dimension (A 12 mm). The clamp suits repetitive positioning and holding duties where a reliable, mechanical solution is preferred over pneumatic variants, particularly when electrical or compressed‑air supplies are limited. Contact Metav Werkzeuge to discuss fitment options for the AMF Push‑rod Clamp No. 6840 and arrange tailored advice from our Emmerich team Technical data SKU: 4000604394NW Type: 6840 Product: Push‑rod clamp Variant: without angled base Brand: AMF Packing unit: 1 Core specifications Max clamping force: 2,500 N Max holding force: 2,500 N Stroke (Hub): 32 mm A: 12 mm B min: 24 mm B max: 56 mm E: 30 mm H1: 82.5 mm HW min: 22 mm HW max: 35 mm L1: 140 mm L2: 22 mm L3: 127 mm M2: M20x1.5 N: 27 mm Thrust screw: M8 x 35 Features & design Size: 3 Supplied without an angled base Compact footprint for tight fixtures Mechanical, repeatable clamping action Suited to fixture and machining setups FAQ What maximum force does this clamp provide? The AMF Push‑rod Clamp No. 6840 (Type 6840, SKU 4000604394NW) delivers a maximum clamping and holding force of 2,500 N, giving dependable retention for medium‑duty tasks. How much travel does the actuator offer and what is the usable height range? The unit features a 32 mm stroke and an adjustable working height range from 24 mm to 56 mm, making the clamp suitable for varied workpiece thicknesses in fixture assemblies. Is the clamp ready for direct mounting in a fixture plate? Yes, the Size 3 version is supplied without an angled base to allow direct mounting; the actuator thread is M20x1.5 with an M8 x 35 thrust screw for secure mechanical connection on fixture plates. Which production environments benefit most from this clamp? This mechanical push‑rod clamp is especially useful in machining jigs, assembly fixtures and test rigs where a compact, reliable clamp with predictable force and travel characteristics is required — the AMF 6840 is built to meet those needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Rod Clamp No Angle Foot Size 1, M4 Pressure Screw, 20mm Stroke, 1,000 N Holding Force - AMF
Take advantage of the combination of compact installation length, a 20 mm stroke and a reliable 1,000 N holding force to secure workpieces consistently in fixtures; procure directly via Metav Werkzeuge or request application guidance from our consultants. Push-rod clamp No. 6840, Size 1 AMF — 20 mm stroke, 1,000 N holding force The Push-rod clamp No. 6840, Size 1 AMF is a compact mechanical clamping element for fixtures and jigging, designed to provide repeatable linear actuation and secure workpiece retention without an angled foot. 20 mm linear stroke Up to 1,000 N holding force M12×1.5 clamping thread Compact 91 mm installation length Reliable clamp power for steady production The compact actuator delivers a controlled 20 mm stroke combined with a maximum clamping force of 1,000 N, which means secure contact pressure for medium-duty machining and assembly operations. The mechanical design converts linear motion into consistent holding force, reducing slippage and rework in repetitive processes. Where cycle stability and predictable clamp behaviour matter, this clamping element offers a straightforward, robust solution that can be integrated into fixtures requiring repeatable actuation. Space-saving mounting and flexible positioning Designed without an angled foot, the clamp is optimised for tight layouts and direct mounting on plates and jigs. The short installation length (L1 91 mm) and compact head geometry allow close-packed arrangements on modular tooling. A standard M12×1.5 interface provides compatibility with common threaded adaptors, while the adjustable contact geometry (B min 17.5 mm to B max 37.5 mm) permits fine alignment of the clamping travel. The modest envelope supports efficient use of clamping stations where floor space and stack height are limited. Simple integration and practical adjustment features Mechanical simplicity is emphasised by the included M4 × 20 pressure screw and the clear dimensional references (A 8 mm; E 20 mm; H1 45.5 mm; HW min 12 mm / HW max 20 mm), which aid swift installation and set-up. The clamp's M12 external thread (M12×1.5) enables direct mounting or the use of adaptors; the push rod travel (hub 20 mm) is suited to both holding and light locating actions. The unit is supplied as size 1 and is compatible with common fixture components, making it easy to replace or expand clamping points while maintaining machine uptime. For tailored application advice or prompt supply from our Emmerich stock, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss integration options and availability. Technical data Article number: 4000604392NW Type: 6840 SKU: 4000604392NW Product type: Push-rod clamp Execution: without angled foot Packaging unit: 1 Numbers / Core technical data Stroke (hub): 20 mm Maximum pressing force: 1,000 N Maximum holding force: 1,000 N L1: 91 mm H1: 45.5 mm B min: 17.5 mm B max: 37.5 mm HW min: 12 mm HW max: 20 mm Designs / Special features Size: 1 Pressure screw: M4 × 20 Clamping thread: M12×1.5 A: 8 mm E: 20 mm L2: 16 mm L3: 74 mm N: 18 mm FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum holding and pressing force of 1,000 N in the specified configuration of the Push-rod clamp No. 6840, Size 1 AMF. How much linear travel does the push rod offer? The unit offers a 20 mm stroke, suitable for short travel positioning and reliable workpiece engagement. Is the clamp supplied with an angled foot? This model is supplied without an angled foot; the flat execution is intended for direct mounting on fixture plates. Which thread is used for mounting and connection? Mounting and clamping interfaces use an M12×1.5 thread; the pressure adjustment is performed via the included M4 × 20 screw. Can the clamp be used in compact, densely populated fixtures? Yes, the compact installation length (L1 91 mm) and reduced head profile make it suitable for close-packed fixture arrangements where space saving is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Rod Clamp No Angled Base Size 5 4,500 N Thrust, M24x1.5 - AMF
Reliable hold and flexible setup are guaranteed by the combination of a 4,500 N clamping force, a 40 mm stroke and an adaptable clamping span, making the clamp ideal for demanding fixture tasks; order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp No. 6840, size 5 (AMF) — 4,500 N clamping force, 40 mm stroke A Push-rod clamp No. 6840, size 5 (AMF) for secure workpiece fixturing in machining and assembly, supplied without an angled foot. High clamping force 4,500 N Stroke 40 mm for secure engagement Adjustable span 26.5–66.5 mm Robust size 5 construction Stable clamping for accurate machining and repeatable results The 4,500 N clamping force and equal holding force 4,500 N ensure consistent retention of components under cutting or assembly loads. A 40 mm stroke provides sufficient travel for engaging irregular or offset workpieces while keeping the contact pattern predictable; this reduces rework and rejects. In practice, the clamp’s performance is translated into fewer adjustments during a production run and improved process reliability. The compact footprint and clear mechanical parameters make integration into existing fixtures straightforward, supporting efficient cycle times and reproducible set-ups. Flexible adjustment that speeds up setup and adapts to parts Designed for adaptable mounting and quick adjustment, the device features an adjustable span 26.5–66.5 mm and a pressure screw M12 x 50 for fine positioning. The main mounting thread M24 x 1.5 allows standardised installation in fixtures and subplates. Key dimensions such as A 16 mm, E 50 mm and H1 99 mm are provided for accurate planning of clamp positions and clearances. Because these values are defined, engineering drawings and jigs can be prepared in advance, shortening set-up times. The unit is supplied without an angled foot, offering freedom to mount on custom brackets or directly into modular tooling systems. Robust design for workshop use and consistent throughput Built as a size 5 clamp with clearly specified limits (HW 30–50 mm, B 26.5–66.5 mm), the component is geared towards industrial applications where repeatability and serviceability matter. The combination of standardised threads and measurable lengths (L1 171.5 mm, L3 158 mm, N 34.5 mm) makes the clamp compatible with common fixture architectures, enabling long-term use with predictable maintenance intervals. Where durable mechanical performance is required, the rated forces and stroke translate into fewer interventions and steady production quality, supporting continuous operation in busy workshops. Contact Metav Werkzeuge for application advice and to secure the AMF Push-rod clamp No. 6840 (SKU 4000604395NW) for reliable fixture performance Technical data Article number: 4000604395NW Product type: Push-rod clamp No. 6840 Brand: AMF Packaging unit: 1 Execution: without angled foot Facts Max. clamping force: 4,500 N Max. holding force: 4,500 N Stroke: 40 mm Pressure screw: M12 x 50 Mounting thread: M24 x 1.5 A: 16 mm B min: 26.5 mm B max: 66.5 mm E: 50 mm H1: 99 mm HW min: 30 mm HW max: 50 mm L1: 171.5 mm L2: 25 mm L3: 158 mm N: 34.5 mm Special features Size: 5 Compact industrial clamp for fixtures Supplied without angled foot Standardised threads for easy mounting Suitable for machining and assembly fixtures FAQ How much clamping force does the clamp provide? The clamp provides a rated clamping force and holding force of 4,500 N for the AMF Push-rod clamp No. 6840 (SKU 4000604395NW), suitable for many machining and assembly applications. What stroke and adjustment range are available? The unit features a 40 mm stroke and an adjustable span from 26.5 mm to 66.5 mm, enabling engagement of parts with varying heights and offsets. Which threads are used for mounting and pressure adjustment? Mounting is effected via an M24 x 1.5 thread and the pressure adjustment uses an M12 x 50 screw, both of which are industry-standard sizes for fixture integration. Is the clamp supplied with an angled foot? No, the clamp is supplied without an angled foot, allowing direct mounting to custom brackets or integration into modular tooling plates. Can the clamp be used in automated fixtures? Yes, the defined forces, stroke and mounting threads make this clamp suitable for automated and semi-automated fixturing systems where mechanical repeatability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp Holding Arm 6000N, 2000N Clamping Force - Kukamet
Benefit from the combination of a 6,000 N holding arm, a 2,000 N maximum clamping force and a compact horizontal-foot mount for secure, space-saving workholding; order directly via Metav Werkzeuge or consult the team for integration advice. Kukamet 221 Vertical Clamp – 6,000 N holding arm, horizontal-foot mount A Kukamet 221 vertical clamp engineered for repeatable, high-force fixtures where robust holding and compact installation are essential High 6,000 N holding force Max clamping force 2,000 N Horizontal-foot mounting design Blackened finish for workshop durability Robust 2.14 kg construction Secure, high-force clamping for repeatable setups The vertical clamp delivers a dependable combination of holding arm strength and controlled clamping force: the arm provides up to 6,000 N of holding capacity while the mechanism exerts a peak 2,000 N clamping force. This distinction means fixtures remain immobile under machining loads while the applied clamp pressure protects components from deformation. For production lines and jigs where repeatability is critical, that separation between holding and clamping performance reduces setup time and lowers scrap rates. The result is a measurable improvement in process consistency and throughput. Space-efficient mounting that adapts to tight fixtures Designed with a horizontal-foot mounting arrangement, the clamp fits into low-profile and constrained fixtures without obstructing tool paths. The mounting concept simplifies retrofitting to existing plates and pallets and enables closer part-to-tool clearances, which can be decisive in compact machining centres or assembly jigs. Because the unit occupies minimal vertical space, designers can prioritise accessibility and tool clearance while still benefiting from a high-holding capability that maintains component stability during machining or testing. Durable finish and solid build for everyday workshop use Constructed with a blackened finish, the clamp is protected against mild corrosion and surface wear while minimising glare at the workbench. The solid mass—approximately 2.14 kg—provides a reassuring feeling of robustness and reduces transmitted vibration at the contact points, which supports more accurate machining and longer service life. The surface treatment and construction together mean lower maintenance intervals and fewer replacements, supporting a more predictable total cost of ownership in busy shop environments. Predictable integration and straightforward operation With a lever-style actuation familiar to shop personnel, the clamp integrates quickly into standard tooling concepts and fixture plates. Its mechanical simplicity ensures predictable behaviour under load and makes inspection and routine checks straightforward. Documentation supplied with the unit enables correct torque and mounting specifications to be applied, helping to avoid misalignment and premature wear. For technical queries or bespoke fixture adaptations, Metav Werkzeuge’s consultative support is available to assist with selection and fitment. Contact Metav Werkzeuge today for tailored advice on integrating the Kukamet 221 vertical clamp into the fixture system and secure reliable, high-force workholding for production or prototyping. Technical Data Article number: 221-6-C GTIN: 8682843520420 ETIM: EC011973 Facts Weight: 2.14 kg Max clamping force: 2,000 N Max holding force: 6,000 N Angle: 120° Special features Material: blackened finish Mounting: horizontal-foot Category: clamp Manufacturer: Kukamet FAQ What are the maximum clamping and holding forces? The Kukamet 221 vertical clamp (SKU 221-6-C) provides a maximum clamping force of 2,000 N and a holding-arm capacity of 6,000 N. How is the clamp mounted to a fixture plate? The unit uses a horizontal-foot mounting arrangement designed for low-profile attachment to fixture plates and pallets. Is the finish suitable for workshop environments? The clamp’s blackened finish offers enhanced surface protection and reduced glare, making the device well suited to standard workshop conditions. Will the clamp fit into compact or tight fixtures? Yes; the horizontal-foot design and compact profile are intended for installations where vertical space is limited. Who to contact for technical integration or special requirements? For assistance integrating the Kukamet 221 vertical clamp into a specific fixture or application, contact Metav Werkzeuge for expert guidance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp M12x80 Press Spindle 4,500 N Clamping Force, 5,000 N Holding Force - Kukamet
Take advantage of a compact, galvanised vertical clamp that combines a robust M12x80 pressure spindle with a high holding force for reliable fixture security. With a maximum holding capacity of 5,000 N and a clamping force of 4,500 N, the design supports stable vertical-foot installation; order directly via Metav Werkzeuge or consult their specialists for application matching. Kukamet Vertical Clamp 212 — galvanised vertical clamp with M12x80 spindle The Kukamet Vertical Clamp 212 is a compact vertical clamping device engineered for secure workpiece retention in workshop fixtures and light industrial jigs. Galvanised finish for corrosion resistance M12x80 pressure spindle for robust clamping Vertical-foot mounting for stable installation Max holding force 5,000 N, clamping force 4,500 N Consistent clamping performance for production demands Built around a precision M12x80 pressure spindle, this vertical clamping device delivers repeatable clamping force and consistent engagement under cycle use. The specified maximum holding force of 5,000 N and clamping force of 4,500 N give a verifiable performance envelope for fixture design and load calculations. Engineers and workshop planners can therefore integrate this clamp into predictable assemblies where known force values are required to secure workpieces during machining, inspection or assembly operations. Compact installation that saves fixture space With a vertical-foot mounting, the clamp preserves table and fixture real estate while offering a secure anchor point for vertical clamping tasks. The vertical-foot mounting reduces lateral footprint and simplifies alignment in jigs and modular fixtures. At approximately 1.54 kg, the unit contributes little mass to the setup, easing handling and positioning during assembly without compromising stability. The compact footprint supports denser fixture layouts and faster changeovers in small-batch production. Galvanised finish and low-maintenance operation A galvanised finish provides effective surface protection against corrosion in workshop environments, reducing the need for frequent upkeep and extending service life. The straightforward mechanical design minimises parts subject to wear, which translates into low maintenance and predictable downtimes. For maintenance teams, routine checks of the spindle thread and clamping surfaces are typically sufficient; spare-part complexity is minimal, which keeps workshop logistics simple and cost-effective. Suitable uses and safe handling recommendations This vertical clamp is particularly suitable for light to medium-duty clamping tasks in general workshop use, fixture-making and assembly stations. When specifying the clamp in a fixture, allow for the stated maximum forces (5,000 N holding, 4,500 N clamping) and ensure that mating components and fastenings meet those loads. Correct tightening of the M12x80 pressure spindle and secure fastening of the vertical foot are essential for safe operation. Where dynamic or impact loads are expected, verify application parameters against the clamp’s rated values before commissioning. For tailored advice on integrating the Kukamet Vertical Clamp 212 (SKU 212-5) into specific fixtures or for technical matching, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and availability. Technical Data SKU: 212-5 GTIN: 8680731501766 ETIM: EC011973 ECLASS: 21041717 Material: galvanised Weight: 1.54 kg Facts Max holding force: 5,000 N Max clamping force: 4,500 N Pressure spindle: M12x80 Weight: 1.54 kg Special features Vertical clamp design Vertical-foot mounting Galvanised finish No special additional features FAQ What is the maximum holding capacity of this clamp? The Kukamet Vertical Clamp 212 provides a maximum holding force of 5,000 N and a clamping force up to 4,500 N, values suitable for many workshop fixture applications. Is the clamp suitable for corrosive workshop environments? The unit features a galvanised finish, which offers good corrosion resistance and reduces maintenance frequency in typical workshop conditions. How is the clamp mounted to a fixture? Mounting is achieved via a vertical-foot mounting, designed for stable fastening to fixture plates or machine tables and straightforward alignment in vertical clamping setups. Which spindle specification does the clamp use? The clamp uses an M12x80 pressure spindle, providing robust thread engagement and straightforward replacement if needed. Can the clamp be used in light industrial jigs and assembly stations? Yes, the clamp is intended for workshop and light industrial fixtures where its compact footprint and rated forces meet the application requirements; verify loads against the stated maximum holding and clamping forces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp Three-Point, Solid Holding Arm & Safety Lock, 3,000 N Thrust - Kukamet
Take advantage of the combination of 3,000 N clamping force, a galvanised finish and a compact horizontal base to secure repeatable fixtures with minimal downtime; order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. Vertikalspanner 211 — Kukamet vertical toggle clamp with 3,000 N clamping force Vertikalspanner 211 is a vertical toggle clamp designed for secure part holding in workshop fixtures and production jigs, combining a robust holding arm with an integrated safety locking mechanism. Robust holding arm with safety lock Galvanised finish resists corrosion 3,000 N clamping force, 3,300 N hold Horizontal base for stable mounting Consistent clamping performance for production use The vertical toggle clamp delivers defined force values that support repeatable workholding: a 3,000 N clamping force with a 3,300 N holding force ensures components remain immobilised during machining, assembly or testing. These numeric values indicate the clamp’s capability to withstand dynamic loads and vibration; for users unfamiliar with the terms, clamping force refers to the pressing force applied when the lever is engaged, while holding force is the resistance to pull-out when loaded. The measured forces make this clamp suitable for standard industrial fixtures where predictable restraint is required, reducing rework and inspection time. Built for resilience and safe operation Constructed with a galvanised finish, the device resists surface corrosion in workshop environments, extending service life and lowering maintenance intervals. The design incorporates a robust holding arm and a safety locking mechanism that prevents accidental release during operation. The lock increases operator safety and process reliability by ensuring the toggle remains engaged under intermittent loads. Where safety documentation is required for work instructions, the mechanical lock provides a clear, verifiable safeguard compared with non-locking clamps. Compact mounting and straightforward integration A horizontal base allows stable attachment to benches, fixture plates or tooling stations while the 150 mm arm provides reach without excessive overhang. At approximately 0.89 kg the clamp is lightweight yet rigid, which simplifies placement in modular jigs and reduces strain on mounting hardware. The compact footprint supports dense fixture layouts and enables faster changeovers in small-batch production. Where adaptation is necessary, the clamp’s standard dimensions and mounting style make it compatible with common workshop practices and retrofit applications. For tailored fixture recommendations or to specify the Kukamet 211 vertical toggle clamp for a particular production task, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation. Technical Data Article number: 211-4-D-L-C2 GTIN: 8680731501353 Brand: Kukamet Facts Clamping force: 3,000 N Holding force: 3,300 N Arm length: 150 mm Weight: 0.89 kg eClass: 21041717 ETIM: EC011973 Special features Galvanised finish Horizontal base mounting Massive holding arm Safety locking mechanism Category: Clamps FAQ What maximum clamping force does the Vertikalspanner 211 provide? The Vertikalspanner 211 provides a maximum clamping force of 3,000 N and a holding force of 3,300 N suitable for many fixturing tasks. Can the clamp be mounted on a fixture plate or bench? Yes, the clamp features a horizontal base that enables stable mounting to fixture plates, benches or tooling stations for repeatable positioning. Is the finish suitable for humid workshop environments? The galvanised finish offers corrosion resistance for general workshop conditions, increasing the service life of the clamp. What benefit does the safety locking mechanism offer? The safety lock prevents accidental opening under load, improving operator safety and ensuring consistent process reliability during machining or assembly. Is the Vertikalspanner 211 suitable for compact jig layouts? With a 150 mm arm and a compact footprint at around 0.89 kg, the clamp is well suited to dense fixture arrangements and modular jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Base M12 x 110 Pressure Screw 3,400N Holding Force 5,500N - AMF
Benefit from a dependable combination of 5,500 N holding force, an adjustable clamping range of −2.5 to 55 mm, and a horizontal base designed for flexible mounting — ideal for secure workholding in production. Order the clamping unit directly via Metav Werkzeuge or contact our consultants for tailored integration advice. Vertical clamp No. 6800, size 6 (AMF) – vertical clamping unit with horizontal base and high holding force The Vertical clamp No. 6800, size 6 (AMF) is a vertical clamping unit for secure workholding in machining and assembly that features a horizontal base for flexible mounting and a mainspring-adjustable clamping screw for consistent contact. High holding force 5,500 N Max clamping force 3,400 N Horizontal base for flexible mounting Clamping range -2.5 to 55 mm Reliable clamping where precision matters The 6800-series vertical clamp delivers measurable security through a holding force of 5,500 N and a maximum clamping force of 3,400 N, which reduces movement during machining and minimises rework. The force specifications support consistent repeatability across batches, allowing process planners to rely on predictable results and integrate the clamp into quality-controlled production. Such measurable performance is particularly relevant for jigging, fixture work and assembly operations where precision and minimal part shift are essential. Adaptable mounting for varied set-ups A horizontal base increases the number of possible mounting orientations on machine tables and fixtures, boosting layout flexibility on the shop floor. The unit is supplied with a M12 x 110 clamping screw and offers an adjustable vertical travel, with a clamping range from −2.5 mm to 55 mm, which accommodates thin and thicker workpieces without additional shims. Because the clamp’s geometry and travel are clearly defined, engineers can plan fixture layouts and CAD models with confidence, avoiding trial-and-error during set-up. Built to streamline workshop processes Designed as size 6 in the 6800 range, the clamping unit balances compact footprint with robust capability, helping to save space on multi-station fixtures and enabling denser part placement. The solid force figures translate into fewer machine interruptions and shorter clamping cycles, improving throughput. Integration into existing tooling systems is straightforward thanks to the horizontal-foot configuration and standardised screw thread, which support quick retrofit and reduced downtime. Clear specifications for planning and procurement All relevant dimensions and mechanical limits are documented for fast incorporation into technical drawings and purchasing lists: defined travel, pin positions and angle values allow technicians to compare options objectively and select the right clamp for the task. The combination of a high holding force, a wide clamping range, and compact design simplifies decision-making when upgrading jigs or specifying new fixtures, delivering tangible production benefits such as reduced set-up time and improved process reliability. Contact Metav Werkzeuge for expert advice on integrating the AMF vertical clamp No. 6800 into production and to request additional technical documentation or CAD files — email info@metav-werkzeuge.com or call +49 2822 7131930 for dedicated support Technical data Article number: 4000604350NW Type: 6800 Label: Senkrechtspanner Nr.6800 Gr.6 waagrechter Fuß AMF Execution: with horizontal base Brand: AMF Packaging unit: 1 Facts Max. clamping force: 3,400 N Max. holding force: 5,500 N Clamping screw: M12 x 110 A [mm]: 14 B [mm]: 165.5 C [mm]: 50.5 D [mm]: 13 E [mm]: 89 F [mm]: 28 H [mm]: 81 H1 [mm]: 333 HW min. [mm]: -2.5 HW max. [mm]: 55 I [mm]: 30 K [mm]: 24.5 L1 [mm]: 231 L2 [mm]: 206 M [mm]: 67.5-72.5 N [mm]: 100 P [mm]: 90 a [°]: 140 Special features Size: 6 Horizontal base Clamping range (HW): −2.5 mm to 55 mm Angle a: 140° Adjustable M dimension: 67.5–72.5 mm Includes standard M12 clamping screw FAQ What is the maximum holding force of this clamp? The clamp offers a maximum holding force of 5,500 N, providing secure retention for demanding machining and assembly tasks. Which clamping travel does the unit support? The vertical travel covers a clamping range from −2.5 mm to 55 mm, allowing workholding of both thin and relatively thick components. Is the product compatible with standard fixture threads? Yes, the unit is supplied with an M12 x 110 clamping screw and is intended for integration with standard fixture layouts. How is the item identified for ordering and documentation? Refer to the article number 4000604350NW and the type 6800 when ordering or requesting CAD data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Base, Massive Holding Arm & Safety Lock, 3,300 N Hold - Kukamet
Take advantage of the combination of 3,000 N clamping capacity, a 150 mm arm and a robust safety lock for secure and repeatable fixture clamping; order the Vertikalspanner 211 directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 211 – Vertical toggle clamp with 150 mm arm and 3,000 N clamping force The Vertikalspanner 211 is a vertical toggle clamp engineered for secure workpiece retention in jigs, fixtures and assembly operations across industrial and workshop environments Vertical toggle clamp with 150 mm arm 3,000 N maximum clamping force Robust arm with safety lock Horizontal foot for secure mounting Boosted throughput with consistent clamping force The vertical toggle design delivers a highly repeatable clamping action, making it a suitable choice where cycle-to-cycle consistency matters. With a rated 3,000 N clamping force and a 3,300 N maximum holding force, the device reduces rework caused by shifting workpieces and supports streamlined production sequences. The 150 mm reach of the arm allows confident access to a range of component sizes while the toggle mechanism enables fast engagement and release, transferring manual handling time into productive machining or assembly time. Secure fixturing and user-safe operation Designed for demanding use, the clamp features a massive holding arm and a positive safety lock to prevent accidental release under load. The horizontal foot mounting provides a stable base for bolting into jigs or fixture plates, ensuring the clamp remains aligned even under repeated stress. At 0.89 kg, the unit combines solidity with manageable mass for straightforward installation and replacement in modular tooling systems, supporting both repeatability and operator safety. Durable finish and workshop compatibility The device is supplied with a blackened finish, offering surface protection that helps resist corrosion in workshop conditions and reduces reflective glare during inspection or welding tasks. Its construction makes it compatible with standard jig and fixture layouts found in metalworking and fabrication shops; the clamp is particularly well suited to holding components during drilling, light milling, brazing and assembly processes. The sturdy design minimises maintenance intervals, delivering longer service life in busy production cells. Simple integration and dependable supply chain Mounting and alignment are accomplished with common fastenings and the horizontal base configuration, so the clamp integrates quickly into existing tooling plates. Technical data and SKU references allow rapid replacement planning: see the item code for procurement and inventory control. For buyers seeking supply reliability, Metav Werkzeuge provides central European distribution from Emmerich and a broad catalogue that simplifies workshop sourcing while maintaining consistent quality standards. Contact Metav Werkzeuge for tailored fixture advice and swift supply from Emmerich — quote SKU B211-4-D-L-C2 or email info@metav-werkzeuge.com / call +49 2822 7131930 for a personalised consultation Technical Data Article number: B211-4-D-L-C2 Manufacturer: Kukamet Material/finish: blackened finish Facts Maximum clamping force: 3,000 N Maximum holding force: 3,300 N Arm length: 150 mm Weight: 0.89 kg Special features Massive holding arm Safety lock Horizontal foot mounting Toggle clamp design Suitable for jigs and fixtures FAQ What is the maximum clamping force of this clamp? The maximum clamping force for the Vertikalspanner 211 is 3,000 N, with a holding force rated at 3,300 N. How is the clamp mounted to a fixture? Mounting is via the horizontal foot; the clamp is intended to be bolted to jig plates or fixture bases for secure positioning. Which materials is the clamp suitable for holding? The clamp is designed for general workshop use and is commonly employed in metalworking jigs, assembly fixtures and light machining applications. Does the clamp include a safety mechanism to prevent accidental release? Yes, the unit is fitted with a safety lock and a robust holding arm to reduce the risk of unintentional opening under load. What is the item code for ordering or stock control? The SKU for ordering is B211-4-D-L-C2 and should be quoted for procurement and inventory purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Base, Massive Holding Arm, 3.3kN Clamping Force - Kukamet
Take advantage of the 150 mm arm, high holding capacity and galvanised durability to secure repeatable vertical clamping in production and assembly tasks. Order the Vertical lever clamp 211 directly via Metav Werkzeuge or ask our consultants if needed. Vertical lever clamp 211 — vertical clamp with 150 mm arm and galvanised finish (Kukamet) A Vertical lever clamp 211 engineered for secure vertical clamping with a horizontal base, offering a robust holding arm for demanding workshop applications Massive holding arm for stable work 3,300 N maximum holding force 150 mm arm reach for deep clamping Galvanised finish resists corrosion Consistent clamping performance that speeds up workflows The clamp delivers reliable vertical clamping through a combination of measured holding forces and a long reach. The specified 3,300 N holding force and a maximum actuation pressure of 3,000 N ensure components remain fixed during machining, assembly or inspection. This consistency reduces rework and downtime, supporting predictable cycle times on production lines. The design translates machine data into an operational advantage by stabilising parts without complex fixtures. Built for endurance in workshop environments Constructed with a galvanised finish and a robust holding arm, this clamp resists corrosion and mechanical wear common in busy shops. The corrosion protection extends service intervals and maintains accurate clamp geometry, which in turn preserves repeatability. At a weight of 0.864 kg the component is compact yet solid, allowing installation where space is limited while still offering durable performance for everyday use in fabrication and assembly cells. Easy integration into standard fixtures and jigs The clamp's horizontal base mounting enables straightforward integration onto plates, stands and modular fixturing systems. With a 150 mm arm reach, the unit can access recessed workpieces or clear tooling envelopes without additional adapter parts. The simple lever action is compatible with manual and semi-automated setups, making it suitable for small batch production and larger assembly stations alike. Clear mechanical function means predictable behaviour even for operators with limited specialist training. Practical benefits for procurement and maintenance The compact construction and familiar lever mechanism reduce the need for specialist spares and simplify maintenance routines. The galvanised surface and sturdy arm cut the frequency of replacements and lower lifetime operating costs. Supplied as a single SKU, the clamp supports efficient stock management and quick replenishment through established supply channels, aiding purchasing strategies that favour reliability and low administrative overhead. Choose the Kukamet 211 for dependable vertical clamping and contact Metav Werkzeuge for tailored advice and prompt supply Technical data SKU: 211-4-D-C2 GTIN: 8680731501322 Manufacturer: Kukamet Core specifications Arm length: 150 mm Weight: 0.864 kg Maximum holding force: 3,300 N Maximum actuation pressure: 3,000 N ECLASS: 21041717 ETIM: EC011973 Materials & features Material: galvanised Mounting: horizontal base Massive holding arm Lever clamp design for vertical clamping FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 3,300 N as specified for the Vertical lever clamp 211 from Kukamet. Which mounting option is required for installation? This unit is designed for a horizontal base mounting; the horizontal base makes it suitable for fixture plates and jigs. What is the arm reach and where does it help most? The arm reach is 150 mm, which is beneficial for accessing recessed parts or clamping over fixtures without additional adapters. Is the clamp suitable for harsh workshop conditions? Yes, the galvanised finish and robust holding arm increase resistance to corrosion and wear, extending service life in workshop environments. Which SKU should be ordered for this model? Order SKU 211-4-D-C2 for the Vertical lever clamp 211 by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Foot Size 4, Max Thrust 1,700N - AMF
Take advantage of the compact footprint, robust horizontal base and clear force ratings to ensure stable, repeatable workholding. With a size 4 design and an M8 x 65 clamping screw, this vertical clamp delivers reliable clamping and secure holding force for fixtures and jigs — order directly via Metav Werkzeuge or consult the team for application advice. Vertical clamp No. 6800 — vertical clamping unit with horizontal foot by AMF The Vertical clamp No. 6800 is a compact vertical clamping device with a horizontal base, designed for secure workholding in fixtures and assembly jigs across light to medium industrial applications. Size 4 vertical clamp for compact fixtures Horizontal foot for stable mounting Holding force 3,000 N for secure workholding Stable clamping that improves process reliability The clamp offers a clearly specified clamping force of 1,700 N and a holding force of 3,000 N, which translates directly into dependable part security during machining, assembly and quality checks. The specified forces enable planners to calculate safety margins and fixture layouts without guesswork, improving throughput and reducing rework. The horizontal foot reduces the required mounting space and provides a low centre of gravity, making the unit suitable where rigidity and a small footprint are priorities. Technical planners will appreciate the M8 x 65 clamping screw, which is industry-standard and simplifies replacement and integration. Precise dimensions for predictable integration Key dimensions are provided for straightforward CAD integration and fixture design: A 10 mm, B 101 mm, C 32 mm, H1 221 mm and an adjustable stroke range HW -6 mm to 22.5 mm. These measures support accurate clash checks and modular fixture planning, while the size 4 classification helps in selecting matched components across a clamping system. The angular orientation at 105° and the compact lateral dimensions contribute to flexible positioning options in constrained tooling spaces. Clear dimension data reduces engineering iterations and accelerates time to first part. Robust build for industrial use and easy maintenance Constructed for everyday workshop and production use, the unit combines a robust base with straightforward mechanical actuation. The mechanical design emphasises repeatability and low-maintenance operation: simple mechanical interfaces and a standard clamping screw minimise downtime for servicing. Where regular inspection is required, the accessible geometry and common fastener sizes make routine checks and part replacement efficient. The component’s specification supports consistent performance under cyclic loading, ensuring longevity and stable fixture behaviour over many production cycles. Versatile application across fixtures and jigs Designed for clamping tasks in assemblies, inspection fixtures and small machining stations, this vertical clamp integrates into modular systems and bespoke jigs alike. The combination of compact footprint and strong holding force makes it suitable for securing components during drilling, light milling, assembly tasks and transfer processes. The horizontal mounting option facilitates direct attachment to base plates or subplates and simplifies alignment in stacked or multi-level fixture assemblies. For applications where force and space constraints must be balanced, this clamping unit offers a practical, engineering-led solution. Discuss mounting options and order the AMF vertical clamp No. 6800 via Metav Werkzeuge for reliable fixture performance — specialists are available to advise on integration and compatibility Technical data Article number: 4000833504NW Type: 6800 Manufacturer: AMF Product: Vertical clamp Execution: with horizontal foot Facts Max clamping force: 1,700 N Max holding force: 3,000 N Size: 4 A: 10 mm B: 101 mm C: 32 mm D: 8.6 mm E: 54 mm F: 16 mm H: 42.5 mm H1: 221 mm HW min.: -6 mm HW max.: 22.5 mm I: 20 mm K: 13 mm L1: 141 mm L2: 130 mm M: 43.5–46.5 mm N: 64 mm P: 53 mm a: 105° Special features With horizontal foot Clamping screw M8 x 65 Packaging unit: 1 FAQ What is the maximum holding force of this clamp? The maximum holding force is 3,000 N for the Vertical clamp No. 6800, providing secure retention for typical fixture applications. Can the stroke be adjusted for different part heights? Yes, the clamp offers an adjustable stroke range (HW) from -6 mm to 22.5 mm to accommodate varying component heights. Is the clamping screw a standard size for easy replacement? The unit uses an M8 x 65 clamping screw, a common size that simplifies maintenance and spare-part sourcing for the AMF vertical clamp No. 6800. Which applications suit this vertical clamp? The clamp is suitable for jigs, fixtures and light machining or assembly tasks where a compact vertical clamping solution with a horizontal mounting base is required. Are full dimensions available for CAD integration? Yes, detailed dimensions including A, B, C, H1 and others are provided for seamless CAD integration and fixture planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com