Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
150mm Vertical Clamp with Horizontal Foot, Max Clamp Force 600 N, Retaining Force 1100 N - AMF
Take advantage of the compact Size 1 format and the combination of a horizontal foot with proven holding and clamping forces (up to 1,100 N holding and 600 N clamping) for secure fixture tasks. Order supply or request specification advice directly via Metav Werkzeuge for a reliable workshop solution. AMF Vertical Clamp No. 6800 — vertical clamp with horizontal foot, Size 1 AMF Vertical Clamp No. 6800 provides robust vertical clamping with a horizontal mounting option for fixtures and jigs in production and assembly environments. Horizontal foot for flexible mounting Clamping force up to 600 N Holding force up to 1,100 N Compact Size 1 for tight fixtures Consistent clamping and measurable performance The device delivers a clamping force of 600 N and a holding force of 1,100 N, values that translate directly into dependable part retention during machining, assembly or inspection operations. Specified forces are particularly useful where repeatable clamping performance is required; the difference between clamping and holding figures helps to understand dynamic versus static load capacities. The integrated M5 x 30 pressure screw enables fine adjustment of contact force, allowing precise set-up on fixtures where controlled pressure is critical for part integrity. Flexible mounting and clear dimensional data Designed with a horizontal foot, the clamp adapts to a variety of fixture geometries without compromising accessibility above the workpiece. Key dimensions such as A = 5 mm, B = 39 mm, C = 16 mm and H1 = 98.5 mm support straightforward planning when integrating the clamp into existing tooling plates or bespoke jigs. The mechanical travel range (HW min. -4 mm / HW max. 2 mm) gives an understanding of adjustable engagement depth; this is helpful when compensating for part tolerances or surface irregularities in assembly processes. Suited to industrial use and straightforward handling The compact construction of the clamp (Size 1) and its clear mechanical interface simplify handling during set-up and maintenance. The design focus on measurable parameters reduces uncertainty in procurement and engineering documents: fixtures benefit from a component whose capabilities are stated in Newtons and millimetres rather than vague descriptors. Where higher throughput and repeatability matter, the clamp’s specification supports process consistency and reduces rework due to insecure clamping. Integration benefits and supply confidence Choosing a standardised clamping element with defined mechanical data supports faster fixture design cycles and easier spare-part management. The clamp matches well with modular fixturing systems and can be incorporated into subassemblies where a low-profile, vertically acting clamp is required. Metav Werkzeuge supplies the component with full logistical support from Emmerich, adding supply-chain transparency and a single-source option for workshop procurement. Arrange supply of the AMF vertical clamp (Size 1, horizontal foot) via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and delivery planning Technical data Article number: 4000833501NW Type: 6800 Manufacturer: AMF Product: Vertical clamp Execution: with horizontal foot Packaging unit: 1 Facts Clamping force max: 600 N Holding force max: 1,100 N Size: 1 A: 5 mm B: 39 mm C: 16 mm D: 4.5 mm E: 18 mm F: 6 mm H: 19 mm H1: 98.5 mm HW min.: -4 mm HW max.: 2 mm I: 10 mm K: 5.5 mm L1: 61 mm L2: 59 mm M: 22.5–26 mm N: 34 mm P: 27 mm a: 95° Special features Pressure screw M5 x 30 Compact Size 1 form factor Horizontal-foot mounting for fixture versatility Clear Newton- and millimetre-based specifications FAQ What maximum clamping and holding forces does this clamp provide? The clamp offers a clamping force of up to 600 N and a holding force of up to 1,100 N, values suitable for many light- to medium-duty fixturing tasks. Is the horizontal foot suitable for use on existing fixture plates? Yes, the horizontal foot design allows straightforward attachment to common fixture plates and modular fixturing systems, facilitating integration into existing tooling. Which adjustment screw is used for contact pressure? The unit uses an M5 x 30 pressure screw for setting and fine-tuning the contact pressure. What travel range is available for adjustment at the clamping interface? The adjustable engagement range is indicated as HW min. -4 mm to HW max. 2 mm, allowing compensation for part height variations. Is the clamp suitable for automated assembly processes? The compact dimensions and defined force ratings make the clamp appropriate for many automated and semi-automated setups where vertical clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp With Massive Holding Arm, 3,300 N Holding Force, Blackened - Kukamet
Take advantage of the combination of robust clamping force, a solid holding arm and compact design to increase fixture reliability and reduce setup times; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 212 — Vertical clamp with 150 mm arm and 3,000 N clamping force by Kukamet The Vertikalspanner 212 is a vertical lever clamp designed for secure workholding in jigs, fixtures and general machining applications. Massive holding arm for extra rigidity 150 mm solid holding arm 3,000 N clamping force Vertical-foot mounting for upright fitting Consistent clamping performance that improves throughput The robust construction delivers dependable, repeatable clamping: a maximum pressing force of 3,000 N combined with a maximum holding force of 3,300 N reduces part movement during machining and assembly. This reliability lowers the risk of rework and supports higher process stability. The compact mass and precise kinematics enable fast actuation, helping to shorten cycle times while maintaining steady contact pressure for repeatable results. Space-saving design and straightforward fixture integration With a 150 mm holding arm and a vertical-foot mounting arrangement, the unit is intended for upright installation on plates and tooling blocks where space is limited. The solid holding arm resists bending and vibration, providing a stable clamp point for workpieces. The blackened finish offers a non-reflective surface that can aid orientation in production environments. Together, these attributes support easy retrofitting into existing jigs and custom fixtures without extensive redesign. Durable construction for workshop conditions and simple upkeep Engineered for repetitive use, the clamp combines a sturdy build with a lightweight profile of 0.87 kg, making it resilient yet convenient to handle during assembly and maintenance. The lever-based operation is familiar to workshop personnel and minimises training time. Basic upkeep—periodic inspection of pivot points and lubrication—ensures long service life and consistent performance, supporting predictable maintenance intervals in production schedules. Contact Metav Werkzeuge for technical matching of Kukamet clamps to specific fixtures or to request detailed supply information from Emmerich; our advisers will support selection and delivery planning Technical data Article number: B212-4-D-C2 GTIN: 8682843522349 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm: 150 mm Maximum pressing force: 3,000 N Maximum holding force: 3,300 N Weight: 0.87 kg Special features Solid holding arm Mounting: vertical foot Finish: blackened Operation: lever clamp FAQ What clamping and holding forces does this clamp provide? The Vertikalspanner 212 offers a maximum pressing force of 3,000 N and a maximum holding force of 3,300 N, suitable for stable workholding in many jigs and fixtures. How is the clamp mounted in a fixture? Mounting is by a vertical foot; the clamp is designed for upright installation on plates or tooling blocks, allowing simple integration into existing fixtures. What is the length of the holding arm and why does it matter? The holding arm measures 150 mm; this span balances reach with stiffness so that the solid holding arm resists deflection while accessing typical fixture positions. Is the finish suitable for workshop use? Yes. The blackened finish provides a practical, non-reflective surface that withstands handling and helps to limit visible wear in production settings. Which operation principle does the device use? The device operates as a lever clamp, offering rapid engagement and reliable mechanical clamping for repetitive tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Massive Holding Arm, 3.3kN Hold Force, Galvanised - Kukamet
Take advantage of a compact, high-force clamping solution that combines a solid 150 mm holding arm with a galvanised finish for durable workshop performance; order the item directly via Metav Werkzeuge or contact their consultants for integration advice. 212 vertical toggle clamp by Kukamet — galvanised, 150 mm arm, 3,300 N holding force The 212 vertical toggle clamp is a sturdy vertical clamping device designed for reliable workholding in jigs, fixtures and general workshop applications. Robust 150 mm solid holding arm Galvanised finish for corrosion resistance Clamping force up to 3,300 N Lightweight: 0.87 kg for easy handling Secure, high-force clamping for repeatable production Built to provide dependable clamping in repeat-use applications, this vertical toggle clamp delivers a holding force of 3,300 N and a maximum pressure force of 3,000 N, values that translate into secure fixation of components during machining, assembly or inspection. The numerical force ratings describe the mechanical load capacity: the holding force indicates resistance against pull-out, while the pressure force denotes the achievable compressive load when the lever is actuated. Those specifications help planners calculate fixture stability and safety margins, supporting predictable cycle times and fewer interruption-related losses. Corrosion protection and long-term durability A galvanised surface treatment guards the mechanism from surface corrosion encountered in workshop environments. The protective zinc layer reduces maintenance needs and helps sustain consistent clamping behaviour over time. Combined with the solid holding arm, the construction is oriented towards long service life even with frequent operation. The unit’s low mass—0.87 kg—makes it straightforward to mount and replace in modular fixtures without sacrificing robustness. Fast actuation and simple integration into fixtures The vertical toggle design uses a lever action to achieve quick engagement and disengagement, reducing setup times and enabling efficient part loading. The 150 mm arm offers reach and clearance for a wide range of workpieces while remaining compact enough for dense jig layouts. Mounting is achieved via a vertical foot, allowing the clamp to be fixed to plates or tooling boards with minimal intrusion into machining envelopes. Repeatable clamping positions and a positive toggle lock contribute to consistent part placement and reduced rework. Practical benefits for workshop and light-industrial use Engineered as a pragmatic fixture element, the device supports streamlined processes by combining lightweight handling with high clamping capacity. The compact footprint and robust lever mechanics make it suitable for manual and semi-automated operations where dependable, repeatable clamping is required. Supplied via Metav Werkzeuge’s European distribution, availability and reliable fulfilment are supported from a centralised quality filter, helping workshops maintain inventory continuity and reduce supplier complexity. For integration support or to discuss suitability of the Kukamet 212 vertical toggle clamp for specific fixtures, contact Metav Werkzeuge—technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 212-4-D-C2 GTIN: 8680731506174 Manufacturer: Kukamet Facts Weight: 0.87 kg Arm length: 150 mm Holding force: 3,300 N Maximum pressure force: 3,000 N EClass: 21041717 ETIM: EC011973 Special features Material: galvanised Massive holding arm Vertical foot mounting Lever clamp design FAQ What is the main difference between holding force and pressure force? Holding force refers to the clamp’s resistance to pull-out, while pressure force denotes compressive load generated during lever actuation; both values are given for the Kukamet 212 vertical toggle clamp to aid fixture design. Can the clamp be used in light machining operations? Yes, the 212 vertical toggle clamp is suitable for light industrial and workshop machining where a 3,300 N holding capacity and a galvanised construction meet the required stability and corrosion resistance. What mounting arrangement does the clamp require? The clamp is fitted via a vertical foot mounting, designed to be secured to tooling plates or fixture boards for repeatable positioning of components. Is the galvanised finish suitable for humid environments? The galvanised surface provides enhanced protection against corrosion in typical workshop and humid conditions, extending service life and reducing maintenance intervals for the Kukamet clamp. Which SKU should be referenced when ordering or enquiring? Reference SKU 212-4-D-C2 when enquiring about the Kukamet 212 vertical toggle clamp to ensure correct identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Massive Holding Arm, 3.3kN Holding Force, 3kN Thrust - Kukamet
Robust clamping performance and a 150 mm solid holding arm deliver dependable, repeatable workholding in tight workshop setups; combined with a 3,300 N maximum holding force, the design supports secure machining and assembly operations. Order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical Clamp 211 – Kukamet vertical toggle clamp with 150 mm solid arm The Vertical Clamp 211 is a vertical toggle clamp designed for secure bench workholding, pairing a horizontal base with a massiven holding arm for general industrial and workshop applications. 150 mm solid holding arm Horizontal base for bench mounting 3,300 N maximum holding force Blackened finish for surface protection Consistent holding for repeatable processes The clamp provides a balanced ratio of 3,000 N clamping force to a 3,300 N holding force, ensuring components remain fixed under machining loads. Clamping force refers to the active closing pressure applied by the toggle mechanism, while holding force denotes the static resistance once locked; both figures deliver objective assurance for process repeatability. This measurable performance reduces rework and supports stable quality in serial tasks, translating technical data into a clear production advantage. Secure bench mounting with a compact working envelope Engineered with a horizontal base for bench or fixture mounting and a 150 mm arm, the unit minimises footprint while giving a long reach for a variety of workpieces. The solid holding arm stabilises the clamped part and resists bending under lateral loads, simplifying fixturing layouts. For workshops where space and accessibility matter, the combination of compact mounting and a robust arm shortens setup times and keeps fixtures compact without compromising on grip. Durable finish and low-maintenance operation A blackened finish provides corrosion-resistant surface protection that supports long service life in workshop environments. The toggle mechanism is designed for straightforward operation and limited maintenance requirements, so daily use is efficient with minimal downtime. The relatively low mass of under 1 kg contributes to ease of handling during fixture changes while the sturdy construction sustains frequent engagement cycles, making the component a practical choice for continuous use. Fast action where speed meets safety The toggle-style actuation delivers rapid clamping and release, enabling quicker changeovers and higher throughput in repetitive operations. The mechanical lock inherent to the design ensures the clamped part remains secure without continuous force, adding a safety margin during secondary operations. These operational advantages convert directly into time savings and predictable work cycles in production and assembly contexts. Choose Kukamet quality for dependable holding — contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B211-4-D-C2 GTIN: 8680731507744 Manufacturer: Kukamet Core specifications Arm length: 150 mm Clamping force: 3,000 N Holding force: 3,300 N Weight: 0.864 kg eClass: 21041717 ETIM: EC011973 Features Mounting: horizontal base Solid holding arm (massive arm) Finish: blackened Clamp type: vertical toggle clamp Category: Clamping tools and fixtures FAQ What clamping and holding forces does this clamp provide? The Vertical Clamp 211 offers a clamping force of 3,000 N and a maximum holding force of 3,300 N, values that indicate the active closing pressure and the static resistance respectively for secure workholding. How is the clamp mounted to a workbench or fixture? Mounting is via a horizontal base designed for bench or fixture attachment, enabling stable installation of the clamp in common workshop set-ups. What is the reach of the holding arm? The holding arm measures 150 mm, giving an extended reach for a compact clamp that suits a variety of component sizes. What surface protection and durability can be expected? The unit features a blackened finish that enhances corrosion resistance and supports long service life under regular workshop conditions. Is the design suitable for repetitive industrial use? Yes, the robust construction and toggle mechanism of the Vertical Clamp 211 are intended for frequent actuation and repeatable fixturing tasks, making it suitable for industrial and workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp With Safety Lock, M5x35 Pressure Spindle, 750N Closing Force - Kukamet
Take advantage of a compact, robust clamp that combines reliable holding force with quick lever action to speed up fixture changes. The zinc-plated finish and horizontal foot allow straightforward integration into existing jigs, while the built-in safety lock reduces the risk of accidental release — order directly via Metav Werkzeuge or contact their consultants for tailored advice. Kukamet Vertical clamp 211 — Vertical clamp with safety lock and horizontal foot The vertical clamp 211 is a compact lever clamp designed for secure temporary clamping in fixtures, jigs and assembly benches where rapid, repeatable action and reliable locking are required. Safety locking mechanism Zinc-plated corrosion protection Horizontal foot for stable mounting Holding force up to 1,000 N Faster throughput with reliable clamping performance A vertical clamp that delivers predictable results reduces cycle time and operator error. The Kukamet 211 vertical clamp provides an actuation force of 750 N and a maximum holding force of 1,000 N, values that translate into secure workpiece retention for light to medium industrial applications. The lever-action design enables quick engagement and release, which shortens fixture changeovers and supports tighter takt times on repetitive tasks. Stating these figures as performance criteria helps production planners compare alternatives and select a clamp that matches required processing forces. Durable construction for workshop environments Corrosion resistance and a compact footprint are practical advantages in busy shops. The body is zinc-plated, offering a protective layer against abrasion and mild corrosion, while the horizontal foot simplifies mounting to plates or fixtures without extensive modification. The clamping contact is provided via an M5×35 spindle, enabling fine adjustment of contact pressure and consistent seating. At around 0.155 kg, the clamp is light enough for multi-point fixture layouts yet sturdy for reliable operation, making it suitable for assembly, light machining and inspection stations. Safe handling and process reliability Built-in safety features minimise unplanned opening and support operator confidence. The integrated safety lock secures the lever in the closed position and prevents accidental release during handling or vibration-heavy operations. This mechanical restraint contributes to safer workflows and reduces scrap and rework associated with unsecured parts. The combination of clear numeric ratings, a positive locking mechanism and a compact mounting interface makes this clamp a pragmatic choice for engineers specifying components for jigs, test rigs and small-batch production lines. For secure, repeatable clamping in production or the workshop, request the Kukamet 211 through Metav Werkzeuge — technical advice and ordering assistance are available from Metav Werkzeuge at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 211-1-L GTIN: 8680731501124 eClass: 21041717 Material: Zinc-plated Weight: 0.155 kg Performance data Maximum actuation force: 750 N Maximum holding force: 1,000 N Spindle thread: M5×35 ETIM class: EC011973 Design & features Horizontal foot mounting Safety locking mechanism Zinc-plated finish Leverage-style vertical clamp FAQ What holding and actuation forces does the clamp provide? The Kukamet vertical clamp 211 offers a maximum actuation force of 750 N and a holding force up to 1,000 N, suitable for light to medium clamping tasks. Is the clamp suitable for workshop environments with occasional moisture? The clamp is zinc-plated, which provides enhanced resistance to corrosion compared with bare steel and is appropriate for general workshop conditions. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, allowing straightforward attachment to plates or fixture bases; the compact design supports multi-point layouts. What is the specification of the pressure spindle? The contact spindle is M5×35, permitting fine adjustment of contact position and pressure for precise seating of the workpiece. Does the clamp include a safety mechanism to prevent accidental release? Yes, the product features an integrated safety lock that secures the lever in the closed position to reduce unintentional opening. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Vertical Base, Massive Holding Arm And Safety Lock, 3.3kN Hold Force - Kukamet
Take advantage of a compact, corrosion‑resistant clamping solution that combines high holding force, a massive holding arm and a secure safety lock for reliable fixture performance. Order the Vertical toggle clamp 212 directly via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp 212 — zinc‑plated vertical clamp with 3,300 N holding force The Vertical toggle clamp 212 secures workpieces vertically in jigs and fixtures, offering strong clamping and a dedicated safety locking mechanism for industrial and workshop use. Robust 150 mm holding arm Safety locking mechanism Zinc‑plated corrosion protection Holding force up to 3,300 N Consistent clamping and repeatable force for production The clamp delivers clearly defined clamping force and holding force, rated at 3,000 N and 3,300 N respectively, which ensures repeatable results in series production and fixture work. Clear numerical ratings make it straightforward to match the device to a particular task: the difference between clamping and holding is relevant for process safety, as the clamping force is the applied load while the holding force is the maximum static retention. This predictability reduces setup time and supports process reliability in machining, assembly and inspection operations. Durable finish and straightforward mounting for long service life Constructed from zinc‑plated material and designed for vertical foot mounting, the device combines corrosion resistance with simple integration into existing fixtures. The 150 mm holding arm and robust construction minimise deformation under load, while the modest mass of 0.785 kg keeps the clamp easy to position during jig assembly. The zinc plating protects contact surfaces from environmental effects and light surface contamination, extending maintenance intervals and preserving accuracy in workshop environments. Safe handling and fast changeovers reduce downtime A safety lock secures the lever once the clamp is engaged, preventing accidental release during processing and transport. The lever‑action mechanism typical of lever clamps provides rapid clamping and release, enabling quick changeovers between workpieces and fewer interruption losses. The combination of a firm locking feature and fast operation supports safer workflows in welding, assembly and test stations, improving throughput without compromising operator safety. Practical applications and low‑effort upkeep Ideal for jigs, assembly fixtures, inspection benches and light welding fixtures, the vertical toggle design offers a compact footprint where vertical retention is required. Routine care is limited to light lubrication of the pivot points and inspection of the locking mechanism; the zinc‑plated surface simplifies cleaning and resists corrosion in humid workshop conditions. The clamp integrates well into bespoke fixtures and standard tooling plates, making it a versatile component for small and medium batch production. The product is supplied by Kukamet, a recognised supplier of mechanical clamping hardware. Contact Metav Werkzeuge in Emmerich for tailored advice and to secure the Kukamet vertical toggle clamp 212 for your workshop — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 212-4-D-L-C2 GTIN: 8680731501735 ECLASS: 21041717 ETIM: EC011973 Facts Max clamping force: 3,000 N Max holding force: 3,300 N Arm length: 150 mm Weight: 0.785 kg Special features Zinc‑plated material Vertical foot mounting Massive holding arm and safety locking Category: Clamps FAQ What is the difference between the clamping force and the holding force? The clamping force is the applied load during engagement, while the holding force indicates the maximum static retention; the Vertical toggle clamp 212 is rated at 3,000 N clamping and 3,300 N holding, providing clear performance limits. Can the clamp be used in welding jigs? Yes, the zinc‑plated finish and robust arm make the clamp suitable for light welding fixtures and assembly jigs where vertical retention is required. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot design; the device is intended for secure attachment to fixture bases or plates using standard fastenings compatible with the vertical foot. What maintenance is required to keep the clamp functional? Periodic lubrication of pivot points and inspection of the safety lock are usually sufficient; the zinc‑plated surface reduces corrosion and simplifies routine care for the clamp. Is the model suitable for serial production use? The repeatable force ratings and secure locking mechanism make the clamp well suited to serial production and repetitive fixture tasks, delivering consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Vertical Foot, Massive Holding Arm And Safety Latch, 3000N Press Force - Kukamet
The combination of a massive holding arm, the safety locking mechanism and a compact 150 mm reach delivers reliable clamping and consistent part positioning for jig and fixture work. Benefit from sturdy vertical mounting and high holding capacity to reduce setup time. Order the clamp directly via Metav Werkzeuge or contact our consultants for specification advice. Vertical clamp 212 — vertical clamping solution with 150 mm arm and up to 3,300 N holding force (Kukamet) The Vertical clamp 212 is a heavy-duty vertical clamping device designed for workshop jigs and fixture applications, offering a long arm reach and positive locking for secure, repeatable clamping. Massive holding arm and safety lock Vertical foot mounting for panel fitting 150 mm arm length for deep reach Up to 3,300 N holding force Robust clamping for stable production fixtures The device provides a high holding force combined with a strong actuator arm, which translates into stable, repeatable clamping during repetitive operations. The substantial 3,300 N retention capability and a maximum clamping pressure of 3,000 N reduce the risk of part movement under load, supporting consistent machining and assembly results. This stability minimises rework and contributes to predictable cycle times on production lines. Safer handling through positive locking A mechanical safety lock prevents accidental release once the clamp is engaged, adding an important layer of operational security in busy workshops. The positive locking mechanism is integrated with the robust arm structure, ensuring the clamp remains closed during handling and transport within a fixture. This design feature supports safer workflows and reduces the likelihood of interruptions caused by unintended unclamping. Simple installation and compact design for easy integration Fitted with a vertical foot for mounting, the clamp is intended for direct attachment to jigs, plates or fixture bases. The 150 mm arm length allows deeper reach into assemblies while the unit’s compact weight of 0.785 kg keeps the overall fixture manageable. The blackened finish provides a uniform surface appearance and helps avoid reflections on illuminated workstations, while the slim footprint supports dense tooling layouts without sacrificing accessibility. Built for repetitive workshop use and precise positioning Engineered for clamping cycles in production and assembly contexts, the clamp combines a solid construction with straightforward functionality that supports fast set-up and reliable part retention. The lever-style actuation and rigid holding arm translate to immediate tactile feedback during engagement, helping operators achieve consistent clamping force and positioning with each cycle. This makes the clamp suitable for fixtures where repeatability and uptime are priorities. Choose the Kukamet vertical clamping solution for dependable fixture performance and contact Metav Werkzeuge for technical consultation or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B212-4-D-L-C2 Material: Blackened finish Weight: 0.785 kg Facts Arm length: 150 mm Clamping force max: 3,000 N Holding force max: 3,300 N Special features Vertical foot mounting Massive holding arm Safety locking mechanism FAQ What maximum holding force does this clamp provide? The Kukamet vertical clamp offers a maximum holding force of 3,300 N; the clamping pressure can reach up to 3,000 N under standard operation (SKU B212-4-D-L-C2). How is the clamp mounted in a fixture? Mounting is done via a vertical foot designed for panel or plate attachment; the vertical foot mounting simplifies integration into jigs and fixture bases for Kukamet’s vertical clamp. What arm length is available and what does it mean for reach? The clamp features a 150 mm arm, which provides additional reach into assemblies and allows secure clamping of components set deeper within a fixture. Does the clamp lock automatically once engaged? Yes, the unit includes a built-in safety locking mechanism that secures the lever position once the clamp is engaged, preventing accidental release during handling. Is the finish suitable for illuminated workstations? The blackened finish on this Kukamet clamp reduces surface reflections and offers a consistent appearance, aiding use in well-lit assembly or inspection areas. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamping Lever With M5x35 Pressure Spindle, Angle Base - Kukamet
Compact performance and straightforward integration: the Vertical clamp 213 combines a sturdy blackened finish with a compact 0.17 kg body and provides up to 750 N clamping force and 1,000 N holding force for reliable fixturing; order directly via Metav Werkzeuge or contact our consultants for technical advice. Vertical clamp 213 – Kukamet vertical clamping device with angle-foot mount and M5×35 pressure spindle The Vertical clamp 213 is a compact, lever-style vertical clamping device designed for secure workpiece retention in machine fixtures and assembly jigs across workshops and light industrial production Robust blackened finish Up to 1,000 N holding force Angle-foot mounting for compact installation M5×35 pressure spindle for precise actuation Consistent, measurable clamping performance for small fixtures With a clear specification of 750 N clamping force and 1,000 N holding force, this vertical clamping device offers predictable retention for repetitive tasks. The distinction between clamping and holding force means the device applies a defined actuation force during engagement and maintains a separate static retention value once set; this separation reduces slippage risk in sensitive set-ups. Engineers and workshop planners benefit from the quantifiable values when calculating safety margins and cycle reliability, making the clamp suitable for low- to medium-duty fixtures where repeatability and known load limits are required. Durable finish and compact mass for longevity and flexible placement The clamp’s blackened finish provides basic surface protection while presenting a subdued appearance that integrates neatly into machine tables and assembly stations. At 0.17 kg, the unit is lightweight yet robust, allowing straightforward retrofitting into bespoke jigs without significant added mass. The surface treatment minimises glare and helps resist light corrosion in typical workshop environments; for users unfamiliar with the term, a blackened finish is a controlled surface oxidation that improves wear resistance and reduces reflections during inspection and set-up operations. Precise actuation and space-saving mounting Equipped with a M5×35 pressure spindle, the device enables accurate contact pressure adjustment and repeatable engagement points across repeated cycles. The angle-foot mounting offers a low-profile footprint, making it easy to incorporate into narrow fixture bays or where lateral space is restricted. Because the mounting style secures the clamp at an offset, layout planners can position the mechanism close to critical tooling without obstructing access, which simplifies fixture design and reduces overall assembly complexity. Practical suitability for workshop and light industrial use The lever-operated vertical design, indicated by its lever-clamp configuration, provides fast engagement and reliable retention for repetitive clamping tasks in production and repair environments. The combination of a compact form factor, measurable forces and standardised spindle thread means the clamp is particularly suited to jigs, test rigs and small-scale production where consistent holding without extensive servicing is required. The model’s specifications allow purchasing decisions to be based on measurable performance rather than subjective claims, supporting efficient workflow integration. For reliable vertical clamping with defined force values and easy fixture integration, contact Metav Werkzeuge for stock status and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B213-1 GTIN: 8680731507942 ECLASS: 21041717 ETIM: EC011973 Facts Weight: 0.17 kg Maximum clamping force: 750 N Maximum holding force: 1,000 N Pressure spindle: M5×35 Special features Blackened finish Angle-foot mounting Lever-operated vertical clamp design FAQ What are the rated forces of this clamp? The Vertical clamp 213 is specified with a maximum clamping force of 750 N and a maximum holding force of 1,000 N, values that support predictable retention in jig and fixture applications. Which spindle thread does the clamp use? The unit is fitted with a M5×35 pressure spindle, enabling fine adjustment of contact pressure and repeatable setting in repetitive operations. How is the clamp mounted to a fixture? Mounting is by an angle-foot, allowing a low-profile installation that suits compact jig layouts and keeps the clamping action clear of neighbouring tooling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamping Toggle Clamp M6x40 Spindle, 1,200 N Clamp Force - Kukamet
Take advantage of the combination of a compact vertical-foot mounting, 1,200 N clamping capacity and a low added mass for faster fixture cycles; order the clamp directly via Metav Werkzeuge or consult the team for application-specific advice. Vertical clamp 212 — Vertical-foot clamp with M6x40 pressure spindle (Kukamet) The Vertical clamp 212 is a compact vertical-foot clamping device for workshop jigs and fixture plates, designed to deliver consistent clamping and holding forces in routine production and assembly tasks. Vertical-foot mounting for compact fixtures 1,200 N maximum clamping force Blackened finish for corrosion resistance M6x40 pressure spindle for adjustable contact Reliable clamping that speeds up production The 212 offers a consistent clamping force of up to 1,200 N with a holding force rated at 1,400 N, providing dependable restraint for short-cycle assembly and machining tasks. The mechanical action is engineered to maintain parallel contact under load, which reduces rework and inspection time. For users who value throughput, the clamp’s swift engagement and release reduce cycle time while its modest mass keeps dynamic loads low on moving fixtures. Space-saving mounting with flexible positioning Thanks to the vertical-foot mounting, the clamp integrates neatly into tight fixture layouts and on vertical plates where horizontal clamps would interfere. The vertical foot allows the device to be mounted with a stable footprint, enabling consistent alignment in modular jigs. The included M6x40 pressure spindle enables fine contact adjustment on varied workpiece geometries, ensuring secure contact without overstressing delicate parts. Robust finish and low-maintenance operation Manufactured with a blackened finish, the clamp resists surface corrosion while offering a low-reflective appearance that suits workshop environments. The compact construction and simple spindle thread make routine maintenance straightforward: occasional cleaning and inspection of the contact face and spindle threads preserves clamping performance. Built-in mechanical simplicity reduces failure modes, contributing to predictable uptime in demanding production settings. Contact Metav Werkzeuge to confirm fitment and receive tailored advice for integrating the Kukamet Vertical clamp 212 into existing fixtures — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: B212-2 GTIN: 8680731507867 Manufacturer: Kukamet Facts Clamping force max: 1,200 N Holding force max: 1,400 N Weight: 0.23 kg Special features Blackened finish Vertical-foot mounting Pressure spindle M6x40 No additional special features noted FAQ What is the maximum clamping force of this clamp? The Kukamet Vertical clamp 212 (SKU B212-2) provides a maximum clamping force of 1,200 N and a holding force rated at 1,400 N. Can the pressure spindle be adjusted for delicate parts? Yes, the M6x40 pressure spindle allows fine adjustment of contact pressure to avoid damage on sensitive workpieces. Is the clamp suitable for tight fixture layouts? The vertical-foot mounting is designed for compact fixtures and vertical plate integration, making it suitable for limited-space applications. What surface protection does the clamp have? The device features a blackened finish that provides basic corrosion resistance and a low-reflective surface suited to workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertikalspanner mit massivem Haltearm, 191mm Arm, Winkelfuß, Druckkraft 3000N - Kukamet
Profitieren Sie von der Kombination aus Massiver Haltearm, 3.000 N Druckkraft und robuster Befestigung für sichere Werkstückspannung; die kompakte Bauweise sorgt für hohe Alltagstauglichkeit in Werkstatt und Fertigung. Bestellen Sie den Vertikalspanner direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Vertikalspanner 213 von Kukamet Der Vertikalspanner 213 ist ein Hebelspanner für präzise Werkstückspannung in Werkstatt und Fertigung Kukamet Vertikalspanner »213« mit massivem Haltearm Druckkraft bis 3.000 N Haltekraft bis 3.300 N Armlänge 191 mm für stabile Spannung Befestigungsart Winkelfuß, Gewicht 1,062 kg Robuste Konstruktion für dauerhafte Spannleistung Die Konstruktion mit massivem Haltearm und brüniertem Finish bietet mechanische Beständigkeit gegen Verschleiß und sorgt für reproduzierbare Spannungsergebnisse. Durch die klare Dimensionierung der Kraftwerte lassen sich Spannprozesse kalkulieren: die angegebene Druckkraft von 3.000 N und die Haltekraft von 3.300 N erlauben eine sichere Fassung auch bei anspruchsvollen Werkstücken. Anwender profitieren von geringer Wartung und langfristiger Stabilität. Präzision und Anwendernutzen im Alltag Eine Armlänge von 191 mm ermöglicht Zugriff auf enge Spannpositionen und erhöht die Flexibilität beim Einrichten. Das geringe Gewicht bei gleichzeitig solider Bauweise reduziert den Handhabungsaufwand beim Positionswechsel und beschleunigt Rüstvorgänge. Das Ergebnis ist eine messbar effizientere Arbeitsfolge, weil fixierte Werkstücke zuverlässig in der gewünschten Lage gehalten werden. Montagefreundlichkeit und Befestigungsoptionen Der Spanner ist für die Montage mit Winkelfuß ausgelegt und lässt sich auf Werkbank oder Vorrichtungsplatten sicher befestigen. Die Montage erfolgt ohne Spezialwerkzeug, was die Einrichtzeit verkürzt und Stillstand minimiert. Das brünierte Material sorgt zusätzlich für Korrosionsschutz und anhaltende Funktionalität auch in rauen Produktionsumgebungen. Geeignet für Handwerk, Vorrichtungsbau und Serienfertigung Dieses Spannmittel ist entwickelt worden für Anwender, die auf hohe Wiederholgenauigkeit und robuste Bauteile setzen. In Werkstätten, Prüfplätzen und beim Vorrichtungsbau bietet der Spanner eine praktikable Kombination aus Präzision und Belastbarkeit. Aufgrund der klaren technischen Daten lässt sich das Gerät einfach in bestehende Spannkonzepte integrieren. Für dauerhafte und präzise Werkstückspannung empfiehlt Metav den Kukamet Vertikalspanner 213 mit massivem Haltearm; bei Fragen zu Anwendung oder technischen Daten erreichen Sie uns unter info@metav-werkzeuge.com Produktmerkmale Artikelnummer: B213-4-D-C3 Hersteller: Kukamet Bezeichnung: Vertikalspanner Baureihe: 213 Fakten Druckkraft max: 3.000 N Haltekraft max: 3.300 N Arm: 191 mm Gewicht: 1,062 kg Besonderheiten Material: Schwarz brüniert Befestigungsart: Winkelfuß Massiver Arm: Ja Besonderheit: Massiver Haltearm Storytrigger: Hebelspanner eClass: 21041717 ETIM: EC011973 FAQ Welche maximale Druckkraft bietet der Vertikalspanner 213? Der Vertikalspanner 213 von Kukamet verfügt über eine maximale Druckkraft von 3.000 N und eine Haltekraft von 3.300 N, sodass belastbare Spannverhältnisse erzielt werden können. Ist der Spanner für den Einsatz in feuchter Umgebung geeignet? Das brünierte Finish des Kukamet Vertikalspanner 213 reduziert Korrosionsrisiken, bei dauerhaft feuchten Bedingungen empfiehlt Metav zusätzliche Schutzmaßnahmen oder regelmäßige Kontrolle. Welche Befestigungsoptionen sind vorgesehen? Der Spannadapter ist für die Befestigung mit Winkelfuß konstruiert, wodurch eine sichere Montage auf Werkbank oder Vorrichtungsplatten gewährleistet ist. Wie schwer ist das Spannmittel und wie wirkt sich das auf die Handhabung aus? Mit einem Gewicht von 1,062 kg bleibt das Spannmittel handhabbar und erlaubt schnellen Positionswechsel, ohne die notwendige Stabilität bei Spannvorgängen einzubüßen. Für welche Anwendergruppen eignet sich dieses Spannmittel besonders? Der Kukamet Vertikalspanner 213 richtet sich an Handwerker, Vorrichtungsbauer und Fertigungsbetriebe, die Wert auf wiederholbare Spannungen und robuste Komponenten legen.
158mm Vertical Clamp 1.2kN Closing Force, Massive Arm, Angled Base, Zinc-Plated - Kukamet
Take advantage of a galvanised finish and a solid holding arm together with defined clamping and holding capacities to secure repeatable production processes; order the Kukamet vertical clamp directly via Metav Werkzeuge or consult the Metav team for integration advice. Vertical clamp 213 by Kukamet — galvanised vertical toggle clamp with solid holding arm A vertical clamp 213 designed for secure workholding in jigs and fixtures, offering reliable clamping and easy mounting for industrial and workshop applications Solid 158 mm holding arm Galvanised corrosion-resistant finish Holding force up to 1,400 N Angled base for stable mounting Consistent clamping for repeatable results The galvanised construction provides corrosion resistance that extends service life in demanding shop environments. With a 1,200 N clamping force and a 1,400 N holding force, the device secures components reliably during machining and assembly operations, reducing rework and stoppages. The robust, solid holding arm absorbs side loads and minimises flex, which helps maintain positional accuracy in production jigs and fixtures. Compact mounting that fits into fixtures and tooling An angled base (Winkelfuß) enables low-profile installation in fixtures where space is limited, while the 158 mm arm offers sufficient reach for a broad range of workpieces. At approximately 0.3 kg, the clamp is lightweight enough to be integrated into moving assemblies without adding unnecessary mass, yet engineered to deliver industrial-grade retention. The mounting geometry simplifies alignment in multi-clamp setups and supports efficient fixture layouts. Low maintenance and long-term reliability The galvanised surface finish and simple mechanical design reduce maintenance intervals and ensure predictable performance over many cycles. The mechanical toggle principle provides secure locking without reliance on external power or pneumatics, which lowers system complexity and service costs. Built for repetitive use in workshops and production lines, the clamp supports stable throughput and dependable fixture behaviour under regular operating conditions. Choose the Kukamet vertical clamp 213 for durable, repeatable clamping — contact Metav Werkzeuge in Emmerich for technical consultation and rapid supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 213-2-D-C3 GTIN: 8680731501896 SKU: 213-2-D-C3 Facts Arm length: 158 mm Weight: 0.3 kg Max clamping force: 1,200 N Max holding force: 1,400 N Special features Material: galvanised Mounting: angled base Solid holding arm Category: clamp (Spanner) FAQ What materials is the clamp suitable for? The Kukamet vertical clamp 213 is provided with a galvanised finish; suitability for specific materials depends on the application and fixture design rather than material alone. How is the clamp mounted in a fixture? The clamp uses an angled base for stable mounting; the angled foot simplifies integration into jigs and fixtures and supports compact layouts. What forces does the clamp deliver? Maximum clamping force is 1,200 N and maximum holding force is 1,400 N, providing reliable retention for typical assembly and machining tasks. Is the clamp suitable for moving fixtures or robotics? At 0.3 kg and with a solid holding arm, the clamp is compact and can be used in mobile or automated fixtures where low mass and repeatable locking are required. What is the model designation and identifier for ordering? Model: vertical clamp 213 by Kukamet — SKU 213-2-D-C3, GTIN 8680731501896 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
158mm Vertical Clamp With Angle Base, Massive Holding Arm, 1.4kN Hold Force, Blackened Finish - Kukamet
Compact, lever-operated vertical clamp with a massive holding arm, 1,400 N holding force and a compact 158 mm reach; ideal for repetitive production tasks and tight fixture layouts — order directly via Metav Werkzeuge or consult their specialists for fast delivery and integration support. Vertikalspanner 213 — Vertical clamp with 1,400 N holding force and angled base (Kukamet) The Vertikalspanner 213 is a lever-operated vertical clamp designed for secure, space-saving fixturing in machining and assembly applications. Solid holding arm for enhanced rigidity 1,400 N maximum holding force 158 mm reach with angled base mounting Blackened finish for corrosion resistance Secure clamping for repeatable production The lever-operated design delivers a dependable holding force of 1,400 N and a maximum clamping/pressing force of 1,200 N, values that ensure components remain stable during machining, welding or assembly. This distinction between holding and pressing capacity is relevant where a workpiece must be locked in position rather than actively pressed; the specified figures provide a clear, measurable basis for fixture planning. The clamp’s behaviour can be integrated into automated sequences, and the clamping action is compatible with typical workshop control systems. Space-saving mounting and precise reach for tight jigs With a reach of 158 mm and an angled base mounting, the device is suited to fixtures where clearance is limited and access from above is required. The shallow profile and light mass (0.3 kg) reduce additional load on moving fixtures and make retrofitting straightforward. Because the clamp is designed for vertical operation, it minimises horizontal interference with neighbouring tools and allows workpiece handling to remain efficient in both manual and semi-automated production setups. Robust construction and protective finish for workshop use The massive holding arm provides improved rigidity and reduced flex under load, which translates into consistent positioning and longer tool life for downstream processes. The blackened finish improves surface resistance to corrosion and wear compared with untreated surfaces, supporting longevity in demanding shop-floor environments. Components are manufactured to be compact and service-friendly; the overall design focuses on dependable performance in daily production rather than decorative detail. Contact Metav Werkzeuge to arrange procurement or discuss fixture integration for the Kukamet Vertikalspanner 213; specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: B213-2-D-C3 GTIN: 8682843522455 Manufacturer: Kukamet Category: Spanner eClass: 21041717 ETIM: EC011973 Facts Holding force max: 1,400 N Pressing force max: 1,200 N Arm length: 158 mm Weight: 0.3 kg Special features Mounting type: angled base Finish: blackened Massive holding arm Storytrigger: lever clamp (hebelspanner) FAQ How much holding force does the Vertikalspanner 213 provide? The Vertikalspanner 213 delivers a maximum holding force of 1,400 N, suitable for secure positioning in many fixture applications. Can the clamp be mounted in compact fixture assemblies? Yes; the angled base and 158 mm reach allow the clamp to be integrated into tight jigs where vertical access and low horizontal profile are required. What is the difference between holding force and pressing force for this clamp? Holding force (1,400 N) refers to the clamp’s ability to keep a workpiece stationary, while pressing force (1,200 N) indicates the maximum load the clamping action can apply during active pressing operations; the Vertikalspanner 213 is optimised for secure retention. Is the finish suitable for workshop environments? The blackened finish provides enhanced resistance to corrosion and surface wear, making the clamp appropriate for regular workshop use. What is the product code for ordering or specifying in a parts list? The SKU for this vertical clamp is B213-2-D-C3 and it is sold under the Kukamet brand as Vertikalspanner 213. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
15° 842 Horizontal Foot Quick-Acting Clamp Screw-Type, Zinc-Plated, 3.5 kN Thrust / 4 kN Hold - Kukamet
Product data contains contradictory information: the item is described as both a screw-clamp type and a lever clamp. This inconsistency makes it difficult to determine the correct clamp type and provide a clear, comprehensive product description. Accurate product details are essential to ensure customers understand the item's functionality and suitability for their needs. Please clarify whether the clamp type is screw-clamp, lever clamp, or another variation. Resolving this ambiguity will allow for the creation of a complete and accurate product description that aligns with the item's actual specifications and intended use.
1600 N Closure Clamp Horizontal Base With Hook, Stainless Steel, 25mm Thread Length - Kukamet
Take advantage of a compact, corrosion-resistant design combined with strong clamping and holding forces for secure fixture work. The stainless steel construction, 1,600 N maximum clamping force and horizontal foot mounting with a hook ensure reliable quick-action securing in jigs and closures. Order the latch clamp directly via Metav Werkzeuge or consult our specialists for application advice. 361 Latch Clamp S361-3-T – stainless steel toggle latch clamp with hook (Kukamet) A 361 Latch Clamp S361-3-T for quick lever locking on fixtures and transport closures, designed for horizontal foot mounting in workshop and industrial settings Stainless steel construction Horizontal base for easy mounting Hook-equipped for secure engagement Clamping force up to 1,600 N Holding force 1,800 N Robust design for secure fixture clamping The clamp is made from stainless steel, which provides corrosion resistance and long service life in workshop environments where coolant, oils or humidity are present. The horizontal foot mounting simplifies installation on jigs and machine tables, allowing the clamp to be integrated into production fixtures with standard fastenings. With a compact form and a thread length of 25 mm, the component is suited to tight assembly spaces while delivering dependable mechanical performance. Fast lever action that speeds production cycles A lever (toggle) mechanism converts operator movement into high clamping output, delivering a 1,600 N clamping force and a 1,800 N holding force for repeatable, vibration-resistant locking. The short, positive stroke reduces cycle time on repetitive operations and supports ergonomic handling on assembly lines. The hook arrangement provides secure engagement for closure applications where a reliable latch is required without complex adjustment. Practical mounting and maintenance advantages Mounting on a horizontal foot makes alignment straightforward and reduces set-up time during fixture changes. The stainless construction minimises corrosion and wear, cutting down on maintenance intervals and supporting predictable downtimes. Weight of just 0.205 kg eases handling and replacement, while the robust mechanical design ensures consistent clamp behaviour across many cycles, improving process reliability in small-batch and series production. Contact Metav Werkzeuge today to confirm mounting details and secure the Kukamet stainless steel latch clamp S361-3-T for reliable fixture and closure tasks Technical Data Article number: S361-3-T GTIN: 8680731509274 Model: 361 Brand: Kukamet Material: stainless steel Data Weight: 0.205 kg Thread length: 25 mm Max clamping force: 1,600 N Max holding force: 1,800 N eClass: 21041718 ETIM: EC011973 Special features Horizontal foot mounting Hook-equipped Lever (toggle) action Corrosion-resistant stainless steel SKU: S361-3-T FAQ What materials is this latch clamp suitable for? The latch clamp S361-3-T is constructed in stainless steel; it is intended for mechanical fixturing and closure tasks where metal and mixed-material assemblies require secure clamping. How does clamping force differ from holding force? Clamping force (1,600 N) refers to the compressive load applied during locking, while the higher holding force (1,800 N) indicates the maximum static retention the mechanism can resist without disengaging. Can the clamp be mounted in other orientations? The design features a horizontal foot for preferred mounting; alternative orientations may be possible depending on fixture design, but horizontal mounting ensures the specified performance. What maintenance does the lever latch require? Routine inspection for wear and lubrication of pivot points preserves the lever action and repeatability; stainless steel reduces corrosion-related maintenance. Is the hook adjustable for different engagement depths? The clamp is supplied with a hook-equipped fastening; engagement adjustments are achieved via the threaded connection (25 mm thread length) and fixture setup to achieve the required closure fit. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1600 N Toggle Clamp With Hook, Horizontal Base, Zinc Plated, 25 mm Thread Length - Kukamet
Take advantage of the compact lever-action design, zinc-plated durability and a holding force of 1,800 N to secure repetitive clamping tasks reliably. Order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. 361 Toggle Clamp — horizontal-foot toggle clamp with hook, zinc-plated (Kukamet) 361 is a horizontal-foot toggle clamp designed for rapid, repeatable workholding in assembly, jigging and general workshop use Horizontal-foot base for stable mounting Zinc-plated corrosion protection Holding force up to 1,800 N Lever-action with quick-engage hook Reliable clamping power that speeds production The lever-action latch provides a consistent max clamping force of 1,600 N and a holding force of 1,800 N, ensuring components remain fixed during machining or assembly. The mechanism converts manual lever movement into high retention pressure, reducing cycle time and the risk of part movement. For applications that demand repeatable results, this toggle clamp offers a measurable improvement in process stability and throughput. The compact footprint and decisive clamping action are particularly valuable in fixtures where space and speed are priorities. Durable finish for longer service life A zinc-plated surface gives the clamp corrosion resistance suitable for workshop and light industrial environments, extending service intervals and reducing replacement frequency. The plating protects the steel substrate against surface rust and wear from frequent operation, so maintenance is limited to occasional lubrication of pivot points. For users who value low-maintenance components, the plated finish delivers reliable protection while keeping the clamp’s appearance and function intact over long production runs. Easy integration into jigs and fixtures Mounting via the horizontal foot simplifies installation on flat bases, while the thread length 25 mm enables straightforward height adjustment and precise positioning of the clamping spindle. The unit’s modest mass (approx. 0.205 kg) minimises added weight on delicate fixtures without compromising rigidity. The supplied hook facilitates quick engagement with mating fixtures or workpiece anchors, making the latch ideal for modular jigs where frequent loading and unloading occur. Installation requires only common fastening hardware and basic hand tools. Practical safety and handling benefits The lever-action layout offers a controlled, binary clamping motion that reduces operator uncertainty during repetitive tasks; the tactile lock point confirms engagement, which helps prevent accidental release. The compact design and clear mechanical feedback support safer operation compared with improvised fixturing. For process planners, this latch provides a tangible efficiency gain: faster cycle times, reproducible clamping pressure and a reduction in scrap caused by shifting workpieces. Contact Metav Werkzeuge for tailored advice or a quotation on Kukamet toggle clamps; our specialists in Emmerich will assist with selection and delivery to ensure the clamp fits the intended application Technical data SKU: 361-3-T GTIN: 8682843522165 Designation: Toggle clamp 361 Facts Weight: 0.205 kg Max clamping force: 1,600 N Max holding force: 1,800 N Thread length: 25 mm Special features Material: zinc-plated Mounting: horizontal foot With hook Lever-action toggle clamp design FAQ What maximum holding force does this clamp provide? The clamp offers a maximum holding force of 1,800 N, which ensures secure retention for typical assembly and jigging tasks. Is the clamp suitable for workshop environments where corrosion is a concern? Yes, the zinc-plated finish on the toggle clamp provides effective corrosion protection for general workshop and light industrial use. How is the clamp mounted to a fixture? Mounting is via the horizontal foot base; the clamp’s threaded spindle with 25 mm thread length allows for height adjustment and secure fastening. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1600N Horizontal Toggle Clamp With Hook, 25mm Thread Length, Zinc Plated, 1800N Holding Force - Kukamet
Benefit from a zinc-plated finish, 1,800 N holding force and compact 0.16 kg mass for reliable, low-maintenance securing of lids and panels — order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Toggle Latch Clamp 362 — zinc-plated with hook and horizontal foot The Kukamet Toggle Latch Clamp 362 is a horizontally mounted latch designed for secure fastening of covers, doors and access panels in industrial fixtures and workshop jigs. Zinc-plated finish for corrosion resistance Holding force up to 1,800 N Closing force 1,600 N for secure locking Horizontal foot with hook for easy mounting Robust, compact fastening for repetitive industrial use The latch is manufactured in zinc-plated steel, combining a corrosion-resistant surface with a compact mass of 0.16 kg, which is advantageous where weight and space are limited. Its hook catch and horizontal base allow it to be integrated into machine guards, transport cases and metal enclosures where a positive mechanical lock is required. The combination of 1,600 N closing force and 1,800 N holding force ensures a firm engagement under vibration and repeated cycles, so assemblies remain secured without extra fasteners or complex adjustments. Clear technical fitment and easy installation Installation is simplified by the horizontal mounting foot; the latch is supplied with a thread length 25 mm for the adjustable catch, enabling fine tuning of engagement distance. The mechanism is designed so that the clamping action is produced by the toggle geometry rather than excessive preload, which reduces wear on mating parts and makes maintenance predictable. Where repeated opening and closing are required, the latch can be serviced quickly and the zinc surface helps to delay onset of corrosion in standard workshop environments. Efficiency in production and workshop contexts This latch supports efficient assembly processes by delivering repeatable, tactile closure and quick release when required. It is particularly suitable for fixtures and jigs, transport fastenings and removable machine guards where uptime and operator safety are priorities. The product is offered within Metav’s distribution network, backed by a longstanding supply chain that serves workshops and industry; Metav’s inventory and logistics at Emmerich provide a consistent source for replacements and larger orders. For projects that require dependable mechanical locking with minimal complexity, the latch provides a pragmatic balance of strength, installation flexibility and low maintenance. Speak to Metav Werkzeuge for delivery options and technical advice on the Kukamet toggle latch clamp 362 — phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com Technical Data SKU: 362-2 GTIN: 8680731504613 Manufacturer: Kukamet Finish: zinc-plated Mounting: horizontal foot with hook Weight: 0.16 kg Closing force: 1,600 N Holding force: 1,800 N Thread length: 25 mm ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.16 kg Holding force: 1,800 N Closing force: 1,600 N Thread length: 25 mm SKU: 362-2 GTIN: 8680731504613 Special features Zinc-plated steel Hook included Horizontal foot mounting Adjustable catch Compact design Category: clamp FAQ What materials is this latch suitable for fastening? The Kukamet toggle latch clamp 362 is intended for securing metal and sheet components; its zinc-plated finish provides corrosion resistance for typical workshop and industrial environments. How is the latch mounted and adjusted? Mounting is by the horizontal foot; the adjustable catch uses a thread length of 25 mm for fine tuning of engagement distance on the assembly. What are the maximum forces the latch can withstand? The device offers a closing force of 1,600 N and a holding force of up to 1,800 N, values measured to indicate secure engagement under load. Is the finish suitable for outdoor or humid environments? The zinc-plated surface improves resistance to corrosion compared with bare steel; for prolonged outdoor exposure or aggressive environments, consider additional protective measures. Can the latch be used on movable guards and frequent-access panels? Yes, the toggle geometry is designed for repeated opening and closing with predictable wear characteristics, making it appropriate for guards and access panels that require regular access. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
161mm Vertical Clamp 2,000N Closing Force, Massive Holding Arm, Angle Base - Kukamet
Take advantage of the combination of a massive holding arm, a compact 161 mm reach and 2,500 N holding force for secure, repeatable clamping in assembly and fixture applications; order the clamp via Metav Werkzeuge or contact their consultants for application advice. Vertical clamp 213 — vertical lever clamp with massive holding arm and 2,500 N holding force (Kukamet) The Vertical clamp 213 is a compact vertical lever clamp designed to secure workpieces in light to medium jigs and fixture applications where a robust, space-saving solution is required Massive holding arm for robust clamping 2,500 N maximum holding force 161 mm arm length for extended reach Angle-base mounting for secure installation Secure clamping with high holding capacity A compact design paired with a massive holding arm gives a high stability-to-size ratio, making this clamp suitable where firm retention is essential. The device delivers a holding force of 2,500 N and a pressing force of 2,000 N, values that translate into reliable part retention during machining, assembly or inspection. The solid arm construction reduces deflection and keeps fixtures aligned, which supports consistent process results and fewer reworks. For production planners the measurable forces provide a clear basis for fixture design and risk assessment. Flexible installation for confined fixtures The clamp is supplied with an angle-base mounting, enabling attachment to vertical plates, fixture bases and customised supports in compact layouts. A 161 mm arm gives extended reach without increasing the overall footprint, allowing clamping over profiles or through-holes where space is limited. At 0.5 kg the unit is light enough for quick handling during fixture assembly yet substantial in feel, which aids precise placement and repeatable positioning during set-up operations. Predictable operation that supports cycle-time efficiency Defined numerical values for clamping and pressing forces allow planners to integrate the device into automated or manual processes with predictable behaviour. The distinction between pressing and holding force ensures that initial engagement is firm while sustained retention remains secure. Consistent clamp performance reduces part movement during downstream operations, helping to lower cycle-time losses caused by repositioning or scrap and supporting an efficient production flow. Durable finish and maintenance advantages A blackened finish provides a corrosion-resistant surface that withstands workshop environments and simplifies care routines. The robust arm design minimises wear at the load-bearing interfaces, so maintenance intervals are extended and total lifecycle handling remains straightforward. Sourced from Kukamet and distributed through Metav Werkzeuge’s quality-controlled supply chain, the device benefits from a practical, industry-oriented approach to precision that supports dependable stocking and traceable quality for European customers. For reliable vertical clamping in compact fixtures, specify the Kukamet 213 vertical clamp and consult Metav Werkzeuge for technical guidance and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B213-3-D-C3 GTIN: 8682843522486 Manufacturer: Kukamet Facts Arm length: 161 mm Weight: 0.5 kg Maximum holding force: 2,500 N Maximum pressing force: 2,000 N eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Angle-base mounting Blackened finish Design type: lever clamp Category: Clamp Material finish: blackened FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 2,500 N; the related pressing force is 2,000 N for initial engagement. Can the clamp be mounted on vertical plates? Yes — the angle-base mounting suits attachment to vertical plates and compact fixture bases. What is the reach of the clamping arm? The clamping arm measures 161 mm, offering extended reach while keeping the overall footprint compact. How heavy is the unit and does it affect handling? Weighing 0.5 kg, the device is light enough for easy handling during fixture assembly while remaining robust in operation. Which manufacturer and SKU apply to this clamp? The clamp is supplied by Kukamet and sold under SKU B213-3-D-C3 through Metav Werkzeuge Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
161mm Vertical Clamp 2000N Closing Force, Massive Hold Arm With Safety Lock, Blackened - Kukamet
Robust, compact clamping that combines a massive retaining arm, a secure safety lock and measurable clamping values for reliable fixture work. Benefit from the 161 mm arm and the high holding force when consolidating production jigs; order directly via Metav Werkzeuge or request technical guidance from the consultants. Vertikalspanner 213 — Vertical clamp with 161 mm arm and safety lock | Kukamet The Vertikalspanner 213 is a compact vertical clamp designed for secure workholding in workshop fixtures and small-series production, delivering repeatable clamping with a saved footprint. Massive retaining arm with safety lock Angle-base mounting for flexible positioning Holding force 2,500 N, pressing force 2,000 N Lightweight construction, only 0.43 kg Stable clamping for repeatable production quality The combination of a massive retaining arm and a dedicated safety lock provides mechanical reliability for repetitive clamping tasks. The clamp’s rated holding force of 2,500 N and pressing force of 2,000 N make it suitable for securing components during machining, assembly or measurement operations. In practical terms, holding force describes the maximum tensile load the clamp resists once engaged, while pressing force indicates the clamping pressure generated during actuation; both values enable planners to select the correct device for fixture safety and process stability. Compact design that reduces setup complexity With an arm reach of 161 mm and a low mass of 0.43 kg, this clamp is engineered for fixtures where space is limited and frequent handling occurs. The angle-base mounting permits flexible positioning on plates and jig frames, simplifying integration into existing tooling. The moderate weight and compact envelope support faster set-up and reconfiguration in small-batch production or repair benches, delivering measurable time savings during fixture changeovers. Durable finish and practical construction for workshop use The clamp is supplied with a blackened, burnished finish, which improves surface protection against light corrosion and wear while maintaining a professional workshop appearance. The massive arm construction resists bending under load, and the mechanical safety lock prevents accidental release in vibration-prone environments. These construction choices lead to a longer service life and fewer unplanned interruptions in daily workshop routines. Suitable applications and installation notes Intended primarily for clamping and fixturing tasks within assembly, inspection and light machining, the device is categorised among clamps for fixture technology. The angle-base fastening method provides a stable interface for bolting to fixture plates; where higher forces are expected, designers should verify plate thickness and fastener strength against the listed clamping numbers. The product’s compact form factor and clear performance values facilitate straightforward selection for jigs, test rigs and small production cells. Contact Metav Werkzeuge for availability and to request detailed drawings or batch supply information for the Kukamet Vertikalspanner 213 (SKU B213-3-D-L-C3) via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: B213-3-D-L-C3 Manufacturer: Kukamet Material/finish: blackened, burnished finish Facts Arm length: 161 mm Weight: 0.43 kg Holding force (max): 2,500 N Pressing force (max): 2,000 N Special features Mounting type: angle base Massive retaining arm and safety lock Category: Clamps FAQ What is the primary use of this clamp? The Vertikalspanner 213 (Kukamet vertical clamp, SKU B213-3-D-L-C3) is designed for fixture and jig work where compact, repeatable vertical clamping is required in assembly, inspection or light machining tasks. How does the safety lock work and why is it important? The integrated safety lock mechanically retains the arm in the clamped position; in the Vertikalspanner 213 this reduces the risk of accidental release during vibration or handling and supports safer operation in production environments. Can this clamp be mounted to custom fixture plates? Yes. The angle-base mounting supports bolting to fixture plates and jig frames; it is recommended to check plate thickness and fastener strength against the clamp’s holding and pressing force values before final installation. Is the finish suitable for workshop environments? The blackened, burnished finish on the Vertikalspanner 213 offers enhanced surface protection against light corrosion and wear, making it suitable for standard workshop conditions. What are the key dimensions and forces to consider when specifying this clamp? Relevant specification points are the 161 mm arm length, weight 0.43 kg, holding force 2,500 N and pressing force 2,000 N, which together determine suitability for specific fixturing tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
161mm Vertical Clamp Three-Point With Solid Holding Arm, 2000N Clamping Force, Galvanised - Kukamet
Robust galvanised construction, a massive holding arm and a 161 mm lever combine to deliver dependable, repeatable clamping with up to 2,500 N holding force; ideal for jigs, fixtures and short-cycle production. Order the Vertikalspanner 213 directly via Metav Werkzeuge or consult our advisors for application-specific mounting advice. Vertikalspanner 213 — galvanised vertical clamp, 2,500 N holding force (Kukamet) The Vertikalspanner 213 is a galvanised vertical clamp designed for secure fixture and holding applications in workshops and light production environments, featuring an angled-foot mount and a compact, robust lever arm. Galvanised construction for corrosion resistance Massive holding arm for high stability 2,500 N maximum holding force 161 mm lever arm for increased reach Reliable holding force for repeatable production The combination of a 2,500 N maximum holding force and a defined 2,000 N actuation force ensures consistent clamping during repetitive operations. This characteristic supports shorter cycle times and fewer reworks because clamping results remain predictable. In practical terms, the solid clamp action reduces part movement during assembly or machining, providing a stable base for quality-controlled processes and helping to maintain throughput in busy workstations. Durable, corrosion-resistant design for long service life Constructed from galvanised steel and fitted with a massive holding arm, this clamp resists corrosion and mechanical wear typical in workshop use. The heavy-duty lever improves load distribution and reduces flex under stress, which prolongs service intervals and minimises unplanned downtime. For engineers and workshop managers, the result is a long-lived tool that upholds fixture accuracy while keeping maintenance requirements minimal. Compact mounting and straightforward integration into fixtures The angled-foot mounting enables low-profile installation on fixture plates and machine tables, while the 161 mm lever arm provides reach without occupying excessive space. Its compact footprint supports dense fixture layouts and allows closer placement of multiple clamps for complex workpieces. The design supports modular jig systems and enhances flexibility in tooling arrangements, simplifying retrofits and new fixture builds. Suitable uses and added operational confidence Designed primarily for workshop and light industrial environments, this vertical clamp performs well in assembly, welding fixtures and holding operations where consistent pressure and repeatable positioning are required. The galvanised finish and robust arm make it particularly useful in environments exposed to coolant or occasional moisture. Supplied as a compact component with a clear technical footprint, it integrates into existing tooling concepts and supports reliable process outcomes. Contact Metav Werkzeuge for precise mounting options and delivery from our Emmerich stock; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the Vertikalspanner 213 and compatible fixture components Technical data Article number: 213-3-D-C3 GTIN: 8680731501971 Weight: 0.5 kg Material: Galvanised Facts Arm length: 161 mm Max holding force: 2,500 N Max pressing force: 2,000 N Mounting: angled foot eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Corrosion-resistant galvanised finish Compact design for fixtures FAQ What is the maximum holding capacity of this clamp? The maximum holding capacity is 2,500 N for the Vertikalspanner 213 produced by Kukamet, suitable for secure workholding in many fixture applications. Which mounting type is used for installation? The clamp is fitted with an angled foot mount (angled-foot), allowing low-profile attachment to fixture plates and workbench surfaces. What material is the clamp made from? The Vertikalspanner 213 is made from galvanised steel, offering enhanced resistance to corrosion and harsh workshop environments. Is the lever arm suitable for close-packed fixture layouts? With a 161 mm lever arm the clamp offers reach while retaining a compact footprint, enabling denser fixture configurations without compromising access. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
161mm Vertical Clamp Three-Point, Massive Holding Arm, 2,000N Thrust / 2,500N Grip, Galvanised - Kukamet
Take advantage of the combination of durable galvanised construction, a 161 mm heavy-duty holding arm and a secure safety lock to ensure reliable clamping and uninterrupted production. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Vertical toggle clamp 213 by Kukamet — galvanised, heavy-duty holding arm The Vertical toggle clamp 213 is a vertical clamp for fixture and workholding applications, designed to deliver consistent clamping performance in jigs, fixtures and assembly operations. Galvanised steel construction for corrosion resistance Massive 161 mm holding arm with safety lock Clamping force up to 2,500 N for secure workholding Angle-foot mount for versatile panel and fixture fixing Secure workholding through clearly defined clamping performance The clamp delivers a clear distinction between clamping force and holding force, offering up to 2,000 N pressing force and a maximum holding force of 2,500 N. This quantifiable performance helps planners select the right device for repeatable operations, reducing rework and downtime. Galvanised steel construction provides corrosion protection, which supports consistent dimension and contact behaviour over time — an important factor for series production and long-term fixtures. Robust mechanics that simplify integration into fixtures A 161 mm heavy-duty arm and an angle-foot mount allow flexible installation on plates and jig bases. The lever mechanism operates as a toggle clamp, converting manual input into a reliable clamping action with positive mechanical advantage. The integrated safety lock prevents accidental release during machining or handling, increasing process safety. These mechanical characteristics make the clamp suitable for both manual assembly stations and semi-automated workstations where robust, predictable clamping is required. Practical benefits for workshop and production use Lightweight at just 0.43 kg, the unit is easy to handle during fixture assembly yet engineered for secure contact under load. The galvanised finish reduces surface corrosion in workshop environments, lowering maintenance cycles and preserving contact faces. Using a standard angle-foot mounting allows quick replacement or repositioning in modular fixtures, supporting lean workflows and faster changeovers. Why this clamp fits into a precision-focused procurement strategy Specifying a device with documented forces and proven safety features supports quality assurance and process documentation. Clear numerical data for clamping and holding forces enables comparison with other components and avoids overspecification. The clamp’s straightforward mechanics mean minimal maintenance and long service life, which together contribute to operational efficiency and reduced total cost of ownership for jigs and fixtures. For tailored advice on integrating the galvanised vertical toggle clamp 213 into fixtures, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com to discuss specifications and delivery options Technical Data Article number: 213-3-D-L-C3 GTIN: 8680731502008 Manufacturer: Kukamet Facts Arm length: 161 mm Clamping force (pressing): 2,000 N Maximum holding force: 2,500 N Weight: 0.43 kg Material finish: galvanised Special features Massive holding arm and safety lock Angle-foot mounting (Winkelfuß) Suitable for lever-clamp applications Robust galvanised steel construction FAQ How does the clamping force differ from the holding force? Clamping force denotes the pressing action generated by the toggle mechanism (here 2,000 N), whereas holding force (up to 2,500 N) indicates the maximum load the clamp resists without release; the Vertical toggle clamp 213 is specified with both values for safe fixture design. Can the clamp be mounted on standard jig plates? Yes. The angle-foot mount permits straightforward installation on common fixture plates and modular bases, making the clamp compatible with many standard jig systems. Is the finish suitable for industrial workshop environments? The galvanised finish protects against surface corrosion and is appropriate for typical workshop conditions, improving longevity and reducing maintenance intervals for the clamp. Does the clamp include any safety feature to prevent accidental opening? A mechanical safety lock is integrated to prevent unintended release during handling or machining, enhancing operator and process safety for the Kukamet vertical clamp. What is the recommended application area for this clamp? The device is intended for fixture and workholding tasks in assembly, jigs and light machining operations where a robust lever clamp with clear force data is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
162mm Vertical Clamp 1,200N Clamping Force, Massive Holding Arm, Galvanised – Kukamet
Take advantage of a compact, robust clamping solution that combines a solid holding arm and galvanised corrosion protection for dependable, repeatable results on assembly jigs and fixtures; order directly via Metav Werkzeuge or consult the Metav team for specification support. Vertikalspanner 211 – Vertical lever clamp with 162 mm arm (Kukamet) Vertikalspanner 211 is a vertical lever clamp designed for fixture and jig mounting, offering compact clamping with a horizontal foot for stable attachment to workbenches and machine tables. Robust 162 mm holding arm Galvanised finish for corrosion resistance Horizontal foot for stable mounting Up to 1,400 N holding force Dependable clamping force for repeatable production The compact vertical lever clamp delivers measurable performance: a 162 mm arm paired with a maximum holding force of 1,400 N and a maximum clamping pressure of 1,200 N ensures secure fixation of workpieces during machining or assembly. The difference between clamping pressure and holding force is that one denotes the immediate applied pressure while the other reflects the sustained retention under load; this distinction supports reliable process planning and reduces rework. The solid main arm provides dimensional stability, which helps maintain consistent part orientation across repeated cycles. Stable installation that saves setup time Equipped with a horizontal foot, the clamp mounts easily to flat surfaces and fixtures, enabling quick integration into existing jigs. The lever-style actuation permits rapid engagement and release, shortening cycle times in repetitive operations. Thanks to its low mass and compact footprint, the component is suitable for confined layouts where larger clamping systems would obstruct access. These characteristics support efficient workflow design and can increase throughput without extensive fixture redesign. Durable finish for long service life and low maintenance A galvanised finish protects the clamp against corrosion in workshop environments, extending service intervals and reducing the need for replacement parts. The protective coating is beneficial where occasional exposure to coolant splash or humid conditions is expected, preserving functional surfaces and the integrity of the lever mechanism. Lower maintenance demands translate into fewer production interruptions and better total cost of ownership for standard shop-floor applications. Practical data for planning and safety compliance With a compact mass of 0.254 kg and clearly defined technical values, the clamp is straightforward to include in bills of materials and safety assessments. The lever geometry and robust arm construction reduce the risk of slippage under rated loads, and the galvanised material simplifies storage and handling logistics. For customers requiring integration guidance or CAD data, technical documentation is available and Metav can advise on suitable fixing patterns and load direction to match the required application. For reliable clamping with a solid holding arm choose the Kukamet Vertikalspanner 211 — contact Metav Werkzeuge for ordering, CAD data or application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 211-2-D-C3 GTIN: 8680731501162 Manufacturer: Kukamet Facts Arm length: 162 mm Weight: 0.254 kg Material: galvanised Mounting: horizontal foot Max clamping pressure: 1,200 N Max holding force: 1,400 N ECLASS: 21041717 ETIM: EC011973 Special features Solid holding arm Lever clamp operation Compact, lightweight design Suitable for fixture and jig mounting FAQ What is the maximum holding force of the Vertikalspanner 211? The Vertikalspanner 211 provides a maximum holding force of 1,400 N and a maximum clamping pressure of 1,200 N for sustained fixation during machining. Can the clamp be mounted on a workbench or machine table? Yes, the clamp features a horizontal foot designed for stable mounting to workbenches and machine tables, supporting straightforward fixture integration. What material and surface treatment does this clamp have? The clamp is made in galvanised material, offering corrosion resistance and reduced maintenance for workshop environments. Is the Vertikalspanner 211 suitable for tight installation spaces? The compact arm and lightweight design make the 211 appropriate for confined layouts and fixtures where space is limited; consult Metav for mounting recommendations. Which identifier should be referenced when ordering or requesting technical data? Reference SKU 211-2-D-C3 and GTIN 8680731501162 when ordering or requesting CAD and technical documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
162mm Vertical Clamp 1,200N Clamping Force, Massive Holding Arm, Horizontal Base - Kukamet
Take advantage of the combination of a solid arm construction, compact 162 mm reach and reliable holding force for secure, repeatable clamping in fixtures and jigs. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 211 — Kukamet vertical clamp with 162 mm arm and blackened finish The Vertical clamp 211 is a compact clamping device intended for secure vertical holding in modular fixturing and machine-table setups, featuring a robust holding arm and a horizontal base for stable mounting. Compact 162 mm clamping arm Solid arm for heavy-duty stability Horizontal base for stable mounting Holding force up to 1,400 N Robust design for repeatable clamping The clamping device is built around a solid arm that reduces elastic deformation under load, so processes requiring consistent positioning benefit from fewer adjustments. The blackened finish provides corrosion resistance and reduces light reflection in machining environments. With a compact mass of 0.254 kg, the unit integrates into fixtures without adding excessive inertia, which supports quick changeovers and stable operation on assembly jigs and machine tables. Measurement-based performance that supports productivity Key performance figures include a clamping pressure of 1,200 N and a holding force rated at 1,400 N, values that translate directly into reliable immobilisation of workpieces during machining or inspection. These numerical characteristics support calculations for fixture design and risk assessment, enabling planners to match the clamp to expected cutting or handling forces and reduce rework arising from slippage. Practical mounting and workshop benefits The horizontal base allows the clamp to be mounted securely on planar surfaces, T-slots or plate workstations, simplifying installation in existing tooling setups. The short 162 mm arm reach means the clamping point remains close to the mounting plane, improving rigidity. These design choices reduce setup time and permit reproducible clamping cycles, which is advantageous for batch production and repetitive assembly tasks. Application focus and compatibility considerations As a vertical clamping solution with a compact footprint, the device is suited to fixtures where vertical restraint is required without excessive envelope. The solid arm construction is designed to withstand repeated actuation and to maintain clamping geometry over many cycles. When integrating the clamp into a system, refer to the numeric ratings for force and the physical dimensions to ensure compatibility with jaws, workpiece profiles and mounting patterns. Contact Metav Werkzeuge to enquire about Kukamet's Vertical clamp 211 and to discuss optimal fixture integration from our Emmerich distribution centre Technical Data SKU: B211-2-D-C3 GTIN: 8680731507676 Manufacturer: Kukamet Core specifications Arm length: 162 mm Clamping pressure (max): 1,200 N Holding force (max): 1,400 N Weight: 0.254 kg Mounting type: horizontal base Features and design Solid/massive holding arm Blackened finish (brünierte) Compact vertical clamping device Category: clamp FAQ What is the maximum holding force of this clamp? The clamp delivers a holding force of up to 1,400 N, enabling secure fixation for a wide range of workshop tasks. How long is the clamping arm and why does that matter? The arm has a reach of 162 mm, which keeps the clamping point close to the mounting plane and increases rigidity in the setup. What mounting option does the clamp use? The device uses a horizontal base for stable mounting on plates or fixtures, simplifying integration into existing tooling. Is the finish suitable for workshop environments? The unit is supplied with a blackened finish, offering basic corrosion resistance and a professional appearance for industrial use. Which SKU should be ordered for this vertical clamp? Order using SKU B211-2-D-C3 to ensure the correct vertical clamp model is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
162mm Vertical Clamp With Massive Holding Arm, 1,200N Press Force, Galvanised - Kukamet
Take advantage of the combination of compact dimensions, reliable clamping force and a zinc-plated corrosion-resistant finish for consistent fixture performance. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 212 — Kukamet vertical clamping lever, 162 mm arm, zinc-plated The Vertical clamp 212 is a compact vertical clamping lever designed for fixture and workshop use where firm, repeatable clamping is required and mounting space is limited. Robust 162 mm solid holding arm Zinc-plated construction for corrosion resistance Clamping force up to 1,200 N Holding force up to 1,400 N Reliable clamping in compact fixtures The vertical clamp delivers measurable performance where space is constrained. With a slender footprint and a 162 mm arm, the device enables stable clamping without requiring excessive installation area. The compact design supports efficient fixture layouts, reducing cycle times in repetitive operations while keeping access to the workpiece clear. This makes the clamp suitable for production jigs and small-batch assembly stations where precise positioning and repeatability are required. Durable construction for daily workshop use Genuine workshop reliability is achieved through a zinc-plated finish and a solid holding arm, which together protect against corrosion and mechanical wear. The galvanised surface prolongs service life in humid or mildly corrosive environments, while the massive arm resists deformation under load. The result is lower maintenance frequency and predictable performance across production runs, supporting long-term operational stability in both manual and semi-automated setups. Measured force for secure, repeatable fixation Designed to provide clear force specifications, the clamp offers a clamping force of up to 1,200 N and a holding force of up to 1,400 N. Clamping force refers to the operational force applied during engagement, while holding force indicates the static retention once the lever is locked. These values help in component selection and risk assessment when securing parts made from common workshop materials, allowing planners to size fixtures according to known mechanical requirements rather than approximation. Straightforward integration into existing fixtures Mounting is via a vertical foot that simplifies attachment to plates, benches or modular tooling. At just 0.256 kg, the unit adds minimal mass to assemblies while offering robust performance, making it suitable for transportable jigs and indexing fixtures. The model’s clear mechanical function — a lever-actuated toggle that locks securely — enables quick installation and predictable behaviour within production sequences, reducing setup times and facilitating rapid changeovers. For procurement or technical advice on the Kukamet vertical clamp 212 and compatible fixture solutions, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 212-2-D-C3 GTIN: 8680731501537 Manufacturer: Kukamet Facts Arm length: 162 mm Clamping force (max): 1,200 N Holding force (max): 1,400 N Weight: 0.256 kg ECLASS: 21041717 ETIM: EC011973 Special features Material: zinc-plated Mounting: vertical foot Massive holding arm Model: 212 Category: clamp FAQ What type of applications is this clamp suited for? The clamp is designed for fixture work, assembly jigs and workshop tooling where a compact vertical clamping action and reliable retention are required; the Kukamet vertical clamp 212 is particularly useful in production and inspection fixtures. How does the clamping force relate to holding force? Clamping force (up to 1,200 N) describes the operational engagement power, while holding force (up to 1,400 N) indicates the static retention after locking; both values help determine suitability for specific parts and materials. Is the clamp protected against corrosion? Yes, the zinc-plated finish provides corrosion resistance suitable for typical workshop environments and extends service life under normal conditions. Can this clamp be mounted on modular fixturing plates? The vertical foot mounting is compatible with plate and bench installations, enabling easy integration into modular fixturing systems and quick replacement where required. What are the main physical dimensions to consider? Key dimensions to note are the 162 mm arm length and the compact footprint provided by the vertical foot, which together influence reach and clearance in fixture design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
162mm Vertical Clamp With Massive Holding Arm, 1.2kN Press Force, 1.4kN Holding Force - Kukamet
Take advantage of a compact 162 mm arm, 1,400 N holding force and a solid holding arm to secure workpieces reliably in vertical setups; order the clamp directly via Metav Werkzeuge or consult our specialists for tailored fixture recommendations. 212 Vertical Lever Clamp — Kukamet · 162 mm arm · 1,400 N holding force The 212 vertical clamp is a compact vertical lever clamp for workshop and industrial fixtures, engineered to provide secure perpendicular clamping where space is limited and repeatable positioning is required. Solid holding arm for reliable clamping 162 mm arm for extended reach 1,400 N maximum holding force Blackened finish for corrosion resistance Stable, high-force clamping for repeatable setups The vertical lever design delivers a dependable holding force of 1,400 N, ensuring consistent fixation for medium-duty assembly and jigs. The combination of a rigid lever mechanism and a solid holding arm reduces movement under load, which supports repeatable positioning and shortens setup time in production processes. The 1,200 N rated pressing capacity complements the holding performance, allowing secure engagement without the need for bulky fixtures. Space-saving mounting that adapts to workshop rigs A 162 mm arm provides additional reach while maintaining a compact footprint suitable for tight fixture grids and conveyor-mounted stations. The vertical base allows the clamp to be mounted with its foot in a perpendicular orientation, making it straightforward to integrate into existing clamping plates or bespoke tooling blocks. This arrangement improves accessibility to the workpiece and helps maintain clear tool paths during machining or inspection sequences. Robust finish and lightweight handling for everyday use Finished in a blackened coating, the clamp resists surface wear and offers improved corrosion protection in workshop environments. At approximately 0.256 kg, the unit combines low mass with mechanical resilience, simplifying handling during fixture changes and minimising added load on adjustable fixtures. The lever-style actuation provides quick engagement and disengagement, supporting efficient cycle times without compromising clamping integrity. Contact Metav Werkzeuge for delivery and specification support regarding the Kukamet 212 vertical clamp — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing fixtures Technical data SKU: B212-2-D-C3 GTIN: 8682843522288 Manufacturer: Kukamet Facts Arm length: 162 mm Holding force: 1,400 N Pressing force: 1,200 N Weight: 0.256 kg eClass: 21041717 ETIM: EC011973 Special features Solid holding arm Vertical base mounting Blackened finish Lever clamp design Category: Clamps / Spanners FAQ What holding force can be expected from this clamp? The Kukamet 212 vertical clamp provides a holding force of 1,400 N, with a pressing capacity rated at 1,200 N for secure engagement. Can the clamp be mounted on a standard fixture plate? Yes, the vertical base mounting is designed for direct integration into fixture plates and bespoke tooling blocks used in workshop and industrial settings. What is the working reach of the clamp? The clamping arm offers a reach of 162 mm, giving extended access while preserving a compact installation footprint. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com