Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
1700 N Three-Point Push Rod Clamp With Horizontal Foot, Stainless Steel - Kukamet
The combination of stainless steel durability, compact weight and proven clamping and holding forces ensures reliable fixture performance and low maintenance intervals. Benefit from the robust horizontal mounting and the standard M6×40 pressure screw for fast integration into production jigs. Order the clamp directly via Metav Werkzeuge or request specification advice from the consultants. Push‑rod clamp 511 (S511-2) by Kukamet — stainless steel, horizontal foot A robust Push‑rod clamp 511 intended for secure clamping in workshop fixtures and light industrial jigs Stainless steel construction for corrosion resistance Horizontal foot for secure bench or fixture mounting Maximum clamping force 1,500 N Holding force up to 1,700 N per clamp Reliable clamping where space is limited Lightweight yet sturdy, this rod clamping device delivers dependable performance in tight setups. With a maximum clamping force of 1,500 N and a holding force of 1,700 N, the unit secures components during assembly, testing and short-cycle production tasks. The compact mass of 0.28 kg minimises added load on movable fixtures and reduces inertia during automated sequences, supporting faster cycle times without compromising grip. The performance figures provide a clear basis for matching the clamp to specific workpiece geometries and process forces. Corrosion-resistant body for long service life Manufactured from stainless steel, the clamp resists corrosion and is suitable for use in humid environments or where frequent cleaning is required. The integrated M6×40 pressure screw gives a standardised interface for force transmission and simplifies replacement or adjustment procedures. Reduced maintenance needs and material longevity lower total cost of ownership for shops that require durable, low-maintenance components in daily operation. The stainless finish also supports consistent use in food-industry adjacent applications or damp production areas where plated parts would wear faster. Simple integration into jigs and fixtures The horizontal foot design allows straightforward mounting to plates, rails or fixture blocks, enabling a secure base that resists lateral loads. Installation uses common securing hardware and the clamp's geometry is suitable for incorporation into modular fixturing systems. The combination of horizontal base, standard pressure-screw thread and compact footprint makes it an economical choice for bespoke tooling where space optimisation and repeatability are priorities. The clamp is well suited to small-batch production, R&D rigs and repair benches requiring reliable repeat clamping. For specification support or to secure workshop-ready clamping from Kukamet, contact Metav Werkzeuge in Emmerich for expert advice and dependable supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S511-2 GTIN: 8680731504330 Brand: Kukamet eClass: 21041716 ETIM: EC011973 Facts Maximum clamping force: 1,500 N Maximum holding force: 1,700 N Weight: 0.28 kg Pressure screw: M6×40 Special features Material: Stainless steel Mounting type: Horizontal foot Particularity: None Category: Spanner FAQ What clamping and holding forces are specified for this clamp? The push-rod clamp is specified with a maximum clamping force of 1,500 N and a holding force of 1,700 N, suitable for light industrial fixturing and assembly tasks. Is the construction suitable for humid or washdown environments? Yes, the stainless steel construction provides corrosion resistance, making the clamp appropriate for environments where regular cleaning or elevated humidity occurs. How is the clamp mounted to a fixture plate? The clamp uses a horizontal foot mounting arrangement that secures the unit to plates or rails with standard fasteners; the pressure interface is an M6×40 screw. Can the clamp be used in automated setups with frequent cycling? The low mass and robust mechanics of this clamp support frequent cycling in automated jigs, offering consistent repeatability for small to medium series production. Which applications are typical for this type of clamp? Common uses include assembly fixtures, test rigs, repair benches and any setup requiring compact, repeatable clamping with corrosion-resistant material. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17000N Holding Force Horizontal Base Clamp With Hook, 15000N Closing Force, Blackened Cast Body - Kukamet
Benefit from a robust cast-body design, 17 kN holding force and a horizontal-foot mount for reliable, repeatable fixture closure. Order the toggle latch clamp 341 directly via Metav Werkzeuge or ask our consultants if needed. Toggle Latch Clamp 341 — Kukamet toggle latch clamp with 17 kN holding force and horizontal base A compact Toggle Latch Clamp 341 designed for secure, heavy-duty holding in fixture and enclosure applications, complete with a horizontal-foot mounting for stable installation. 17 kN maximum holding force 15 kN closing force for secure clamping Horizontal-base for stable installation Cast-body with blackened finish and hook Engineered for predictable, high-performance clamping The clamp delivers a 17 kN holding force and a 15 kN closing force, values that describe the static load it resists and the actuation force generated when engaged. In practice, this means the latch provides a reliable mechanical lock for jigs, access panels and transport closures where consistent retention is required. The forces are quoted as peak capacities; selecting safety margins in fixture design ensures long service life and consistent results. Stable mounting and rugged construction reduce downtime With a horizontal base for mounting and a cast body finished in a blackened coating, the product combines dimensional stability with surface protection. The integrated hook and a 130 mm thread length allow fine adjustment during setup, while the clamp’s 1.85 kg mass contributes to vibration resistance in machining and assembly environments. These design choices reduce rework and the need for frequent retightening, supporting smoother production processes. Practical applications and straightforward specification checks The latch is intended for heavy-duty industrial use in fixtures, machine guards and transport closures where a secure, repeatable closure is essential. Its straightforward mechanical design supports easy integration into existing assemblies and simple replacement planning. For clarification on compatibility with specific jigs or mounting plates, technical drawings are available and Metav Werkzeuge can provide parts guidance and supply information by email or phone. Contact Metav Werkzeuge for tailored availability and technical advice on the Kukamet Toggle Latch Clamp 341 (SKU 341-4) and ensure rapid, reliable delivery from Emmerich. Technical data SKU: 341-4 GTIN: 8680731502428 Model: 341 Manufacturer: Kukamet Facts Weight: 1.85 kg Max holding force: 17,000 N (17 kN) Max closing force: 15,000 N (15 kN) Thread length: 130 mm Special features Material: blackened finish with cast body Mounting: horizontal foot Hook: with hook ECLASS: 21041718 ETIM: EC011973 Category: Clamps FAQ What load capacities should be assumed for fixture design? The Kukamet toggle latch clamp 341 specifies a maximum holding force of 17 kN and a closing force of 15 kN; for fixture design, engineers typically apply safety factors to these values when specifying retaining elements. Is the clamp suitable for vibrating environments? Yes, the cast-body construction and horizontal-foot mounting of the toggle latch clamp 341 (SKU 341-4) contribute to stable installation and good resistance to loosening under vibration when correctly mounted. Can the latch be adjusted on-site after installation? The latch features an adjustable hook and a 130 mm thread length that allow on-site fine-tuning of engagement height and tension during commissioning and later adjustments. What surface protection does the finish provide? The blackened finish on the cast body offers basic surface protection against handling and workshop conditions; the finish reduces visible wear and helps preserve functional surfaces over time. Which applications are best suited to this latch? The clamp is designed for heavy-duty closures such as jigs, machine guards and transport enclosures where repeatable, secure clamping is required; for specific use cases, refer to technical drawings or consult Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700N Holding Force Pushrod Clamp M6x40, Blackened Finish - Kukamet
The compact combination of a 1,500 N pressing force and a 1,700 N holding capacity makes this clamp a reliable choice for repeatable workholding; its M6x40 spindle and blackened finish ensure easy integration and long service life. Order the push-rod clamp 513 directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 513 — compact lever clamp, 1.5 kN pressing force (Kukamet) The Push-rod clamp 513 is a compact lever clamp designed for secure, repeatable holding in machining and assembly applications. 1.5 kN pressing force 1.7 kN holding capacity M6x40 spindle thread Blackened, wear-resistant finish High-performance clamping for efficient machining The Kukamet rod clamp delivers a consistent pressing force of 1,500 N, which translates into reliable contact pressure for short-cycle production and fixture work. The specified holding capacity of 1,700 N provides a safety margin that reduces slippage risk under intermittent loads. Expressed in Newtons, these figures describe the actual force applied and retained by the device; such numeric values enable accurate fixture design and predictable process results. The result is shorter set-up times and fewer reworks when used as a fixed clamping element in jigs and fixtures. Space-saving fixture integration and simple mounting Thanks to the M6x40 spindle thread and the without foot configuration, the 513 model integrates easily into compact fixtures or can be fitted directly to tooling plates where base mounting is not feasible. At 0.2 kg the clamp adds minimal mass to assemblies, which helps maintain balance in rotating or moving fixtures and simplifies handling during operator setup. The compact form factor is particularly advantageous in congested tool zones or where several clamps must be positioned close together, enabling denser, more economical fixture designs and faster changeovers. Durable finish and low-maintenance operation A blackened (brunished) finish protects the clamp against surface wear and offers improved resistance to mild corrosive influences, reducing the need for frequent replacement or reconditioning. The mechanical design focuses on straightforward operation and easy access to the spindle for adjustment and alignment, which contributes to reduced maintenance intervals. For workshops seeking a dependable, compact clamping solution, this lever-style rod clamp combines straightforward handling with robust surface treatment to support continuous use in everyday production. Contact Metav Werkzeuge for application advice and to specify the Kukamet push-rod clamp 513 for your fixtures — our Emmerich team will assist with selection and delivery. Technical data Article number: B513-2 GTIN: 8680731505030 Manufacturer: Kukamet Facts Pressing force: 1,500 N Holding capacity: 1,700 N Weight: 0.2 kg Spindle thread: M6x40 Special features Finish: blackened (brunished) Mounting: without foot Category: clamp FAQ What clamping force does the Push-rod clamp 513 provide? The Kukamet Push-rod clamp 513 provides a pressing force of 1,500 N and a holding capacity of 1,700 N for secure workholding. How is the clamp mounted in a fixture? Mounting is carried out via the M6x40 spindle thread; the 513 is supplied without a foot to allow direct integration into compact fixtures. Is the finish resistant to workshop wear? Yes, the blackened (brunished) finish on the 513 improves surface wear resistance and reduces visible corrosion under normal workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700N Push Rod Clamp Zinc Plated, M6x40 Spindle, 1500N Thrust - Kukamet
Robust zinc-plated construction combined with measurable holding and pressing forces provides dependable clamping for repeatable production. The compact, lightweight design and M6x40 pressure spindle make integration into fixtures simple and efficient. Order the Schubstangenspanner 513 directly via Metav Werkzeuge or ask our consultants if needed. Schubstangenspanner 513 — Zinc-plated push-rod lever clamp, 1.7 kN holding force (Kukamet) The Schubstangenspanner 513 is a compact zinc-plated push-rod clamp intended for secure workpiece fixturing in light to medium-duty workshop and industrial applications Zinc-plated steel finish Up to 1,700 N holding force 1,500 N maximum pressing force Compact, lightweight 0.2 kg Reliable clamping for consistent processes The holding force of 1,700 N and a maximum pressing force of 1,500 N deliver quantifiable performance that minimises slippage and rejects during machining or assembly. These measurable values support production planning and quality control by allowing engineers to select a clamp that matches required clamping loads. The integral M6x40 pressure spindle gives precise contact adjustment, ensuring consistent force transmission and reducing the need for constant re‑setting. Fast installation and reduced set‑up time A lever-style push-rod design provides swift engagement and release, cutting fixture changeover times and increasing throughput. The unit’s compact and lightweight construction (0.2 kg) makes it easy to position in limited spaces and to retrofit into existing jigs where a base plate is not required — the clamp is supplied without foot, enabling direct in‑line mounting. This simplicity supports lean workflows and helps to reduce operator fatigue during repetitive clamping cycles. Corrosion protection and workshop suitability A zinc-plated finish offers basic corrosion resistance for general workshop environments, extending service life and maintaining reliable contact surfaces over time. The corrosion protection helps preserve functional surfaces where frequent handling or coolant mist may occur, lowering maintenance effort. Built for everyday industrial use, the component combines practical durability with straightforward operation, making it suitable for small-series production, repair shops and toolrooms seeking dependable fixturing. Choose the Kukamet 513 for consistent, measurable clamping performance and contact Metav Werkzeuge for procurement advice or to discuss integration into existing fixtures — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 513-2 GTIN: 8680731502718 Manufacturer: Kukamet Weight: 0.2 kg Material: Zinc-plated Mounting: Without foot Pressure spindle: M6x40 Facts Maximum pressing force: 1,500 N Maximum holding force: 1,700 N Weight: 0.2 kg Special features Push-rod lever clamp design Compact and lightweight for tight spaces Zinc-plated finish for corrosion protection Category: Clamps / Spanner FAQ What clamping forces can be expected from this clamp? The Kukamet Schubstangenspanner 513 provides a maximum pressing force of 1,500 N and a holding force up to 1,700 N, values that support reliable fixturing in light to medium-duty applications. Is the clamp suitable for direct in-line mounting? Yes, the unit is supplied without a foot, designed for direct in-line mounting where space is limited and a low-profile solution is required. Which spindle size does the clamp use for pressure adjustment? Adjustment is via an M6x40 pressure spindle, which allows fine control of contact position and clamping engagement. How compact is the clamp for retrofitting into existing jigs? At 0.2 kg and with a lever-style push-rod configuration, the clamp is compact and lightweight, making it straightforward to integrate into existing jigs and fixtures. Can this clamp withstand regular workshop conditions? The zinc-plated finish provides basic corrosion protection suitable for typical workshop environments, preserving functionality during routine use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700N Pushrod Clamp With Vertical Foot, Stainless Steel, 1500N Thrust - Kukamet
Stainless steel construction paired with a compact 0.28 kg body and up to 1,700 N holding force delivers dependable, corrosion‑resistant clamping for production jigs and workshop fixtures. Order the Push‑rod clamp 512 via Metav Werkzeuge or contact our consultants for tailored advice. Push‑rod clamp 512 by Kukamet — stainless steel, high holding force A robust stainless steel push‑rod clamp designed for vertical mounting in fixtures and small machining set-ups, offering precise pressure control and long service life. Stainless steel construction for corrosion resistance Max holding force 1,700 N for secure clamping Vertical foot mounting for space-saving set-ups Pressure spindle M6x40 for fine adjustment Reliable clamping that resists shop environments Built from stainless steel, this rod clamp provides a durable solution where exposure to coolant, oils or humid conditions is likely. The combination of 1,700 N holding force and a 1,500 N pressing force means components remain fixed under incidental loads and light machining operations, reducing rework and stoppages. The low mass (0.28 kg) of the unit allows quick repositioning on assembly jigs without compromising stability. For those unfamiliar with torque figures: holding force refers to the maximum lateral retention capability, while pressing force denotes the axial contact pressure applied by the spindle; both together determine how securely a workpiece is held during processing. Space-conscious mounting with precise adjustment The vertical foot design saves table area and permits installation on crowded fixture plates, locating the clamp close to the workpiece for improved stiffness. A pressure spindle M6x40 enables fine, incremental adjustment of contact pressure, so sensitive parts can be clamped without deformation. This feature simplifies set-up: the spindle is tightened to the required contact and the rod mechanism converts that input into a consistent clamping action. The compact profile suits common jigs and modular fixturing systems in production and small‑batch environments, where repeatability and quick changeovers are essential. Dependable performance backed by a trusted supplier Manufactured by Kukamet, the unit combines a straightforward mechanical design with materials that reduce maintenance effort and extend service intervals. The rod clamp's simplicity supports rapid visual inspection and replacement of wear parts if necessary, which contributes to predictable process uptime. Sourcing through Metav Werkzeuge ensures centralised procurement, reliable stock handling and professional after‑sales advice; this partnership supports workshops and industrial buyers who prioritise consistent supply and proven product quality. For corrosion‑resistant, high‑holding clamping from Kukamet, contact Metav Werkzeuge for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S512-2 GTIN: 8680731504347 Material: Stainless steel Weight: 0.28 kg Facts Max pressing force: 1,500 N Max holding force: 1,700 N Pressure spindle: M6x40 Mounting type: Vertical foot eCl@ss: 21041716 ETIM: EC011973 Special features Category: Spanner / Clamp Compact design for fixture integration Suitable for production and workshop use SKU: S512-2 FAQ What clamping capacity does this rod clamp offer? The clamp delivers a maximum holding force of 1,700 N and a pressing force of 1,500 N, which allows secure fixation of typical jig and fixture components when using the Push‑rod clamp 512. Can the clamp be mounted on a fixture plate with limited space? Yes, the vertical foot mounting and compact housing make the clamp suitable for constrained set‑ups and modular fixturing where table area is at a premium. How is the clamping pressure adjusted? Adjustment is made via the pressure spindle (M6x40); turning the spindle changes contact pressure incrementally, enabling delicate parts to be clamped without damage. Is the material appropriate for workshop environments with coolant or oil exposure? The stainless steel construction resists corrosion from common coolants and workshop contaminants, supporting longevity and minimal maintenance. Which applications suit this clamp best? The clamp is intended for assembly fixtures, jigs and light machining tasks that require repeatable, compact clamping solutions; its low weight and simple mechanics favour quick set‑ups and frequent reconfiguration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700N Three-Point Push Rod Clamp 1.5kN Thrust Stainless Steel Without Base - Kukamet
Take advantage of a compact, corrosion-resistant clamp that delivers a holding force of 1,700 N and a maximum thrust of 1,500 N for reliable fixturing; its low weight and stainless construction make it ideal for repeatable production use. Order or request advice via Metav Werkzeuge for straightforward procurement and technical guidance. Push-rod clamp 513 by Kukamet — stainless steel, 1,700 N holding force The Push-rod clamp 513 is a compact stainless steel clamp engineered for secure holding and repeatable positioning in jigs, fixtures and short-run production equipment Stainless steel body for corrosion resistance Holding force up to 1,700 N Maximum thrust 1,500 N Compact 0.2 kg lightweight design Consistent clamping power for process reliability The 513 push-rod clamp provides reliable holding capacity with a rated holding force of 1,700 N and a maximum thrust of 1,500 N, delivering the mechanical restraint needed for machining, assembly and inspection operations. These figures indicate the static and dynamic loads the device withstands; higher holding and thrust values translate directly into fewer reworks and more consistent cycle outcomes. Where repeatability is required, the clamp offers repeatable positioning and stable force transmission, reducing setup time and downstream quality checks. Durable stainless design for workshop environments Constructed from stainless steel, this clamp resists corrosion in humid or solvent-exposed environments while maintaining dimensional stability. The lightweight 0.2 kg construction reduces fixture mass, aiding quick handling and minimising load on moving assemblies. The integrated pressure spindle is specified as M6x40, allowing fine adjustment of contact pressure and simple replacement with standard hardware. The absence of a base foot (mounting: without foot) permits installation in confined spaces or inline mounting directly into plates or fixture blocks. Fast integration and low-maintenance operation Designed for straightforward integration into production fixtures, the rod clamp combines a compact footprint with robust function. The stainless construction and simple mechanical design require minimal maintenance, supporting continuous operation in busy workshop settings. The clamp’s compact form factor and consistent mechanical performance enable efficient cycle times and predictable part registration, helping production engineers to streamline fixture design and reduce machine downtime. For specification checks, application advice or to request a quotation for the Kukamet push-rod clamp 513, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S513-2 GTIN: 8680731504194 Material: Stainless steel Weight: 0.2 kg Core specifications Holding force: 1,700 N Maximum thrust: 1,500 N Pressure spindle: M6x40 eCl@ss: 21041716 ETIM: EC011973 Features Mounting: without foot Clamp type: push-rod clamp Category: Spanner Manufacturer: Kukamet FAQ What loads can this clamp handle during machining? The Kukamet push-rod clamp 513 is rated for a holding force of 1,700 N and a maximum thrust of 1,500 N, suitable for many light to medium machining and assembly tasks. Is the clamp suitable for corrosive or humid environments? Yes. The clamp’s stainless steel construction provides enhanced corrosion resistance and is appropriate for harsher workshop conditions. How is contact pressure adjusted on this clamp? Adjustment is made via the pressure spindle (M6x40), which allows precise setting of contact height and pressure for consistent part holding. Can the clamp be mounted directly into a fixture plate? The 513 is supplied without a foot, enabling direct or inline mounting into plates or fixture blocks where a compact installation is required. What is the product identification for ordering or specification? Refer to the SKU S513-2 and GTIN 8680731504194 when specifying or ordering the Kukamet push-rod clamp 513. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1725N Holding Force Horizontal Base Toggle Clamp, Silicone-Coated Handle, Zinc Plated, 50mm Thread Length - Kukamet
Take advantage of a galvanised, compact latch that combines robust clamping performance with an ergonomic, silicone-coated handle for fast, repeatable fastening. The horizontal base and integrated hook provide secure mounting and quick engagement, making this clamp a practical choice for production jigs and workshop fixtures — order directly via Metav Werkzeuge or ask our consultants for advice. Toggle Latch Clamp 361 by Kukamet — horizontal base, silicone-coated handle A Toggle Latch Clamp 361 engineered for secure, rapid fastening in industrial jigs, fixtures and workshop applications with a horizontal base for stable mounting. Horizontal base for stable fixture mounting Silicone-coated handle for slip resistance Galvanised steel for corrosion resistance Up to 1,500 N clamping force Secure clamping for repeatable production The clamp provides a consistent 1,500 N clamping force with a holding capacity of 1,725 N, ensuring reliable retention of parts during processing and transport. In practice, these values mean fewer repositioning steps and less rework on assembly lines and fixture-based tasks. The measured clamping and holding figures support decisions in production planning and offer a verifiable basis for choosing a compact mechanical fastener for repeat operations. Ergonomic handling that speeds up workflows An ergonomically designed, silicone-coated handle improves grip and reduces operator fatigue during frequent clamping cycles. The horizontal base simplifies integration into fixtures and tooling plates, while the built-in hook enables quick engagement and secure latching without additional parts. These features translate to reduced cycle times and easier manual operation on the shop floor, supporting smoother interaction between operator and fixture. Robust construction for workshop conditions Constructed from galvanised steel, the fastener resists corrosion in humid or dusty environments, extending service life and lowering replacement frequency. The lightweight design (approximately 0.1 kg) and adjustable 50 mm thread length permit flexible installation and fine adjustment of clamp travel. Simple mechanical construction allows straightforward maintenance and inspection, contributing to dependable uptime in small-batch and continuous production settings. For reliable, slip-resistant fastening choose Kukamet's Toggle Latch Clamp 361 — contact Metav Werkzeuge for supply and technical advice from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 361-2-K GTIN: 8680731504200 ECLASS: 21041718 ETIM: EC011973 Core measurements Max clamping force: 1,500 N Max holding force: 1,725 N Thread length: 50 mm Weight: 0.1 kg Materials and features Material: galvanised Silicone-coated handle Horizontal base With hook FAQ What clamping and holding forces does this latch provide? The latch delivers a clamping force of 1,500 N and a holding force of 1,725 N, values suitable for many jigs and fixture applications where secure retention is required. Is the clamp suitable for workshop environments prone to moisture? Yes, the galvanised construction gives the clamp corrosion resistance, making the Kukamet latch suitable for humid or general workshop conditions. How is the clamp mounted to a fixture plate? Mounting is via the horizontal base; the design allows straightforward integration into fixture plates and tooling with the thread and base fixing arrangement. Can the clamp travel be adjusted to different part heights? Adjustment is achieved through the threaded spindle (50 mm thread length) so the latch can be fine-tuned to varying part heights and clamping distances. Does the handle provide good grip for frequent operation? The silicone-coated handle enhances grip and reduces slippage during repeated cycles, improving operator comfort and consistency. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
179mm Horizontal Clamp Solid Holding Arm, 90° Angle, 5,000 N Clamping Force - Kukamet
Combine the heavy-duty 179 mm arm with a galvanised finish to achieve dependable, repeatable clamping; the high holding force and clear mounting design support uninterrupted production. Order the Kukamet 111 horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 111 Horizontal toggle clamp — 179 mm arm, galvanised finish A Kukamet 111 horizontal toggle clamp designed for secure horizontal fixturing in jigs and production benches. Heavy-duty 179 mm arm Galvanised corrosion resistance Holding force up to 5,000 N Horizontal base mounting Reliable clamping for repeatable assembly processes This toggle clamp is engineered for consistent clamping performance; the lever mechanism converts operator input into a secure hold, delivering a holding force that reaches 5,000 N. Such reliable force transmission reduces variation in assembly and machining setups, which enhances throughput and minimises rework. The robust action is suitable where quick manual operation and repeatability matter most, offering a measurable productivity gain over looser fixture solutions. Durable construction that cuts maintenance intervals Manufactured with a galvanised finish, the clamp resists corrosion in workshop environments and retains functionality where humidity or light contamination occurs. The heavy-duty arm design and a solid build contribute to longer service life and predictable wear characteristics. As a result, maintenance cycles are extended and downtime is reduced, supporting sustained production schedules in small workshops and light industrial settings. Straightforward installation for fast machine integration The clamp is fitted with a horizontal base that simplifies mounting to jigs, plates and fixture rails; the compact 179 mm arm delivers a clear lever reach that integrates into constrained spaces. The distinction between max clamping force (4,500 N) and static holding capacity is intentional: one value describes the compressive pressure during engagement, the other the continued retention under load. This separation helps engineers choose the correct clamp for specific fixture demands and prevents overspecification. Practical fit for trade workshops and production cells Designed as a standard component for manual fixturing, the clamp suits fabrication shops, assembly benches and testing jigs where reliable, repeatable fixing is required. The compact footprint and familiar toggle action make it easy for technicians to adopt, while the galvanised surface and solid construction support long-term asset value. Combined with Metav’s supply and quality screening, the solution is aimed at teams seeking affordable precision without compromise. Contact Metav Werkzeuge today to specify the Kukamet 111 for fixture applications or for tailored technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 111-5-D-C2 GTIN: 8680731500325 ETIM: EC011973 ECLASS: 21041719 Manufacturer: Kukamet Performance data Arm length: 179 mm Angle: 90° Weight: 1.48 kg Max clamping force: 4,500 N Max holding force: 5,000 N Materials & special features Galvanised finish Horizontal base mounting Massive holding arm Toggle clamp (lever clamp) design FAQ What maximum holding force does the clamp provide? The Kukamet 111 horizontal toggle clamp offers a maximum holding force of 5,000 N, specified for static retention under load. What is the effective clamping pressure during engagement? The clamp reaches a maximum clamping (compressive) force of 4,500 N when the lever is fully engaged. How is the clamp mounted? The unit is supplied for horizontal base mounting and is suited to jig plates and fixture rails that accommodate a horizontal foot. What material and surface protection does the clamp have? The clamp is finished in galvanised steel, providing improved corrosion resistance for typical workshop conditions. Is the arm length suitable for compact fixtures? With a 179 mm arm, the clamp offers a compact lever reach that is compatible with constrained fixture designs while maintaining effective clamping action. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17–42mm Closure Clamp Horizontal Base With Hook, Spring-Loaded, 220N Push, 325N Hold - Kukamet
Take advantage of the combination of reliable 325 N holding force, compact 0.341 kg construction and a spring-loaded hook for fast, repeatable fastening in fixtures and small assemblies. Order the closure clamp directly via Metav Werkzeuge or ask our consultants if needed. Closure clamp 311 — horizontal-foot latch with hook and spring, arm 17–42 mm (Kukamet) Closure clamp 311 is a horizontal-foot latch engineered for secure, repeatable fastening on jigs, fixtures and small assemblies, offering quick-action closure and a compact footprint for workshop integration. *Robust black-oxide finish Spring-loaded quick action Hook connection for positive engagement Holds up to 325 N retention force Faster, repeatable clamping for production workflows The spring-loaded mechanism enables a swift over-centre action that reduces cycle time on repetitive tasks. With a clamping force of 220 N, the unit delivers a defined compressive action while the adjustable arm (17–42 mm) permits adaptation to common fixture profiles. The horizontal-foot mounting allows the latch to be mounted flush to plates and rails, giving a compact installation that preserves workspace and supports steady throughput. Built to last under workshop conditions A blackened finish (brünniert) provides enhanced surface protection and a professional appearance while the hook-style engagement ensures a positive, audible lock. The closure maintains a holding force of 325 N, which translates into secure retention of parts during machining or inspection. The clamp’s modest mass (0.341 kg) and a thread length of 75 mm allow a firm mechanical anchorage without undue bulk, supporting long-term reliability and reduced maintenance intervals. Easy integration into jigs, fixtures and small assemblies Designed for fixture builders and maintenance workshops, the latch offers straightforward mechanical integration: the horizontal foot provides a stable mounting platform and the hook connection simplifies alignment. The compact design supports close-packed layouts and repeatable positioning, which is advantageous for assembly lines or inspection jigs where consistent clamping force and quick release cut process time. The clamp is suitable wherever a dependable, quick-action fastening is required. Choose the Kukamet closure clamp 311 for reliable workshop fastening — contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B311-3-Y GTIN: 4061905078644 eClass: 21041718 ETIM: EC011973 Manufacturer: Kukamet Facts Arm range: 17–42 mm Max clamping force: 220 N Max holding force: 325 N Thread length: 75 mm Weight: 0.341 kg Special features Horizontal-foot mounting Spring-loaded action Hook connection for positive engagement Blackened (brünniert) finish Category: Clamps FAQ What arm widths does this latch accept? The closure clamp 311 accepts arms from 17–42 mm, enabling adaptation to a wide range of fixture profiles. What are the clamping and holding forces? The Kukamet closure clamp offers a clamping force of 220 N and a holding force of 325 N for secure retention during handling and light machining. How is the latch mounted to a fixture? Mounting is via a horizontal foot with a 75 mm thread length; the design ensures a firm attachment to plates and rails for repeatable positioning. Is the finish suitable for workshop environments? Yes, the blackened (brünniert) finish on the closure clamp 311 provides surface protection suited to workshop conditions and reduces visible wear. Which applications are typical for this clamp? This latch is ideal for jigs, fixtures, assembly benches and inspection equipment where quick-action, repeatable fastening is required; the Kukamet SKU B311-3-Y is designed for these use cases. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17–42mm Closure Clamp With Hook, Spring-Loaded, 220N Press Force, Zinc Plated - Kukamet
Take advantage of a compact, spring‑assisted toggle clamp that combines galvanised construction, an adjustable arm (17–42 mm) and secure holding performance for reliable fixture work; order the clamp directly via Metav Werkzeuge or request specification advice from our consultants. Kukamet 311-3-Y toggle clamp — horizontal foot, spring‑assisted, adjustable arm 311-3-Y is a horizontal toggle clamp designed for fastening workpieces in jigs and fixtures where a consistent clamping action and corrosion resistance are required Galvanised steel construction Horizontal mounting foot Spring-assisted clamping action Adjustable arm 17–42 mm Consistent holding performance for repeatable tasks The 311-3-Y toggle clamp delivers measurable performance where repeatability matters: a holding force of 325 N and a closing force of 220 N provide stable restraint for many assembly, welding and test applications. These force figures indicate the clamp’s capacity to resist displacement under load, helping to reduce rework and downtime. Specified in newtons for clear comparison, the values are suitable for light-to-medium duty fixture work and serve as a reliable basis when selecting a clamp for production jigs or repair benches. Installation and adjustment designed for workshop efficiency Fitted with a horizontal mounting foot and an adjustable arm (17–42 mm), the clamp is simple to integrate into existing fixtures. The thread length of 75 mm allows fine height adjustment during set-up, while the built‑in spring supports smooth engagement and reduces operator effort during repetitive cycles. With a compact mass of 0.341 kg, the component is easy to position and replace in modular tooling systems. The hook configuration provides a secure contact point for a variety of striker plate geometries without complicating the mounting process. Durable finish and low‑maintenance operation for everyday use The galvanised surface treatment increases resistance to corrosion in typical workshop environments, extending service life and reducing the need for protective measures. Combined with robust mechanical design and a compact footprint, this clamp supports reliable clamping in production, maintenance and assembly contexts. The straightforward mechanism minimises wear and simplifies inspection routines, making it a practical choice for operations that prioritise uptime and predictable fixture performance. Select the Kukamet 311-3-Y when a compact, spring‑assisted horizontal toggle clamp is needed — contact Metav Werkzeuge for delivery options and precise application guidance from our Emmerich team. Technical data Article number: 311-3-Y Manufacturer: Kukamet GTIN: 8680731505382 SKU: 311-3-Y Material: Galvanised Mounting: Horizontal foot Special feature: With spring With hook: Yes Facts Weight: 0.341 kg Arm range: 17–42 mm Thread length: 75 mm Closing force (max): 220 N Holding force (max): 325 N eClass: 21041718 ETIM: EC011973 Special features Galvanised finish Spring-assisted action Hooked clamping point Compact design for modular fixtures Category: Toggle clamp FAQ What forces does the clamp provide and what do they mean? The clamp offers a closing force of 220 N (force applied during engagement) and a holding force of 325 N (resistance to displacement once engaged), values that indicate suitability for light-to-medium duty fixture and assembly tasks. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, enabling secure attachment to baseplates and fixture plates; the 75 mm thread length allows for precise height adjustment of the adjustable arm. Can the clamp cope with corrosive workshop conditions? The galvanised finish provides enhanced corrosion resistance for typical workshop environments, reducing maintenance frequency and helping to prolong service life. Is arm adjustment straightforward for different workpiece sizes? Yes, the adjustable arm (17–42 mm) permits quick adaptation to varying workpiece profiles and striker positions, supporting flexible jig design without additional components. What makes this clamp suitable for repetitive assembly operations? The spring-assisted mechanism ensures smooth, repeatable engagement and reduces manual effort during frequent clamping cycles, while the hooked contact point secures the workpiece reliably. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17–42mm Horizontal Base Toggle Clamp With Spring And Safety Lock, 325 N Holding Force - Kukamet
Take advantage of the combination of dependable clamping performance, compact design and simple adjustment to ensure consistent fixture results. Order directly via Metav Werkzeuge or contact our consultants for specification support and rapid supply from Emmerich. 311 Latching Clamp by Kukamet — Horizontal mount, safety lock The 311 Latching Clamp is a horizontal‑mount locking clamp designed for repeatable workholding and jig applications, featuring a spring‑loaded action and an integrated safety latch for secure, high‑cycle operation. Spring-loaded action with safety lock Horizontal-foot mounting for sturdy installation Adjustable arm 17–42 mm span Blackened finish with included hook Secure, measurable clamping for reliable production The compact locking device delivers a 220 N clamping force and a 325 N holding force, values that translate into predictable fixture behaviour on assembly lines and test jigs. These figures describe two different functions: the clamping force is the maximum pressure exerted during engagement, while the holding force indicates the retention under load once the latch is closed. The result is consistent repeatability and reduced rework in serial processes, making the clamp suitable for routine production tasks where process stability is a priority. Fast installation and straightforward adjustment save time Designed with a horizontal‑foot mounting, the clamp fits into standard fixture plates with minimal modification, enabling quick retrofit or new jig construction. The adjustable arm (17–42 mm) and thread length 75 mm allow fine tuning of engagement height and reach without replacing components, while the low mass (approx. 0.341 kg) keeps added inertia to a minimum. These design choices reduce setup time and make the clamp compatible with a wide range of part geometries. Built for safety and long service life A spring‑loaded action paired with a positive safety lock keeps the latch engaged under vibration and repeated cycles, reducing the risk of accidental release. The blackened finish provides basic surface protection and a uniform appearance for workshop environments, and the unit is supplied with a practical hook for direct attachment to the workpiece or fixture. Together these features support uninterrupted production and safer handling in high‑use applications. Practical uses and suitability for industry fixtures This locking clamp is ideal for repetitive assembly, quality inspection fixtures and small machining nests where a compact, reliable clamp is required. The combination of measurable holding values and a compact footprint makes the device particularly useful in confined setups and automated stations that demand consistent part positioning. The robust locking mechanism ensures long service intervals and predictable behaviour under frequent operation. For robust and repeatable workholding, consider the Kukamet 311 Latching Clamp — contact Metav Werkzeuge for technical advice or to secure supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: B311-3-Y-L GTIN: 4061905080982 ECLASS: 21041718 ETIM: EC011973 SKU: B311-3-Y-L Core technical data Clamping force (max): 220 N Holding force (max): 325 N Arm span: 17–42 mm Thread length: 75 mm Weight: 0.341 kg Special features Horizontal-foot mounting Spring and safety lock Included hook Blackened finish With hook FAQ What clamping and holding forces does the clamp provide? The latch offers a 220 N clamping force and a 325 N holding force, providing measurable engagement and retention for repeatable fixtures. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot; the clamp is designed for horizontal‑foot installation in standard fixture plates and jigs. Can the reach be adjusted for different part heights? Yes, the arm is adjustable across a 17–42 mm span and includes a 75 mm thread length for fine height adjustment. Does the device include any safety features? The unit features a spring‑loaded mechanism combined with a positive safety lock to prevent unintended release under vibration or load. Is the clamp supplied ready for immediate installation? The clamp is supplied with the hook included and a blackened finish; it requires standard fixing to the fixture plate for immediate use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17–42mm Toggle Clamp Horizontal Base With Spring Safety Lock, 220N Thrust, Zinc-Plated - Kukamet
Robust, compact and practical: the zinc-plated construction combined with 220 N clamping force and an adjustable arm 17–42 mm delivers reliable holding for repetitive fixtures; order the 311 toggle clamp directly via Metav Werkzeuge or consult our specialists for application advice. 311 Toggle clamp — horizontal foot, spring-loaded with safety latch (Kukamet) A 311 toggle clamp for horizontal mounting, providing secure, repeatable workpiece holding in production and workshop fixtures. Horizontal-foot mounting for stable fixation Spring-loaded mechanism with safety latch Zinc-plated corrosion resistance Adjustable spindle 17–42 mm for versatility Consistent clamping performance for repetitive production Designed for fixtures and jigs where reproducible results matter, the 311 toggle clamp applies a defined 220 N clamping force and a 325 N holding force, ensuring components remain stationary during machining, assembly or testing. The adjustable arm 17–42 mm allows fine tuning of the contact point, which reduces setup time and increases throughput in repeat operations. Numerical values are given to enable straightforward selection against fixture requirements and to support process planning. Quick, safe operation reduces set-up time A spring-loaded action combined with a safety latch offers both immediate clamping and secure locking to prevent accidental release during cycle times. The horizontal mounting foot simplifies integration into base plates and fixture plates, while the built-in hook provides a positive engagement. This mechanism is engineered to shorten clamping cycles, improve operator confidence and lower the risk of rework due to movement during handling. Durable finish and compact design for workshop applications The zinc-plated surface protects the clamp against corrosion in typical workshop environments, while the compact mass (weight 0.341 kg) keeps added inertia low when used in automated or manual fixtures. The combination of a horizontal foot and compact dimensions makes the device suitable where space is limited but reliable fixation is required. The clamp’s straightforward geometry and serviceable spindle thread length mean it can be adjusted or replaced quickly, supporting steady production with minimal downtime. Contact Metav Werkzeuge for advice on fixture integration of the Kukamet 311 toggle clamp and for reliable supply from Emmerich — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical Data SKU: 311-3-Y-L GTIN: 8682843523858 Manufacturer: Kukamet Core data Clamping force: 220 N Holding force: 325 N Arm range: 17–42 mm Thread length: 75 mm Weight: 0.341 kg Eclass: 21041718 ETIM: EC011973 Special features Mounting: horizontal foot Hook included Spring-loaded with safety latch Material/coating: zinc-plated FAQ What clamping and holding forces does this clamp provide? The Kukamet 311 toggle clamp delivers a clamping force of 220 N and a holding force of 325 N, suitable for many light- to medium-duty fixture tasks. Is the clamp suitable for cramped fixture layouts? Yes, the compact design and horizontal-foot mounting make the 311 toggle clamp appropriate for confined fixture plates and tight assembly stations. How is the clamping point adjusted? Adjustment is achieved via the spindle/arm, which covers a range of 17–42 mm; thread length is 75 mm to allow secure setting of the contact point. What finish does the clamp have and how does it affect durability? The clamp is zinc-plated, offering corrosion resistance for typical workshop environments and extending service life under normal operating conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1800N Clamping Toggle Latch Vertical Base With Hook, 50mm Thread Length - Kukamet
Take advantage of a compact toggle latch that combines a 1,500 N closing force with an 1,800 N holding capacity and a durable blackened finish for consistent, repeatable fastening in fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Toggle latch clamp 412 — vertical-foot lever clamp with hook The Toggle latch clamp 412 serves as a compact locking lever for fixtures and jigs where secure, repeatable closure is required; its vertical-foot mounting and integrated hook make it suitable for upright attachment and reliable retention. Vertical foot mounting for upright attachment Hook-equipped design for secure locking Max clamping force 1,500 N Holding force up to 1,800 N Blackened finish resists wear Reliable clamping for repeatable setups A lever-style locking clamp delivers quick-action closure with predictable force. The mechanism provides a closing force of 1,500 N and a holding force of 1,800 N, values that translate into secure retention for routine production cycles. These metrics support faster set-up times and reduced rework because components remain fixed during machining, assembly or testing. The hook element ensures the latch remains engaged under vibration, improving process stability and lowering the risk of unintended release. Compact form for tight fixtures and straightforward mounting Designed for integration into confined fixtures, the clamp features a vertical foot for upright attachment and a threaded length of 50 mm for height adjustment and alignment. At approximately 0.21 kg, the unit is lightweight yet robust, simplifying retrofits and multi-station installations. The compact footprint allows closer packing of clamps on jigs, enabling efficient use of table space and faster changeovers while maintaining consistent clamping performance. Durable finish and low-maintenance operation The component is supplied with a blackened finish that reduces visible wear and provides basic corrosion resistance in standard workshop conditions. The lever action is straightforward to operate and requires minimal upkeep, which helps to reduce downtime and maintenance costs. Constructed for repeated cycles, the device offers reliable behaviour in manual and semi-automated applications, delivering predictable clamping force over long service intervals. Contact Metav Werkzeuge for tailored supply and technical clarification regarding the Kukamet toggle latch clamp 412 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B412-2 GTIN: 8680731508635 eClass: 21041718 ETIM: EC011973 Manufacturer: Kukamet Core technical figures Max clamping force: 1,500 N Holding force: 1,800 N Threaded length: 50 mm Weight: 0.21 kg Special features and design Vertical foot mounting With hook Blackened finish Category: Clamp FAQ What maximum clamping force does this toggle latch provide? The clamp provides a maximum closing force of 1,500 N as specified for the Kukamet toggle latch clamp 412 (SKU B412-2). Is the latch suitable for upright mounting on fixtures? Yes; the product is supplied with a vertical foot for upright attachment, allowing straightforward installation in jigs and fixture plates. Can the latch sustain vibration or intermittent shock loads? The hook-equipped design and the specified holding force of 1,800 N ensure secure retention under typical workshop vibrations when the latch is correctly mounted. What adjustment options are available for alignment? Adjustment is achieved via the 50 mm threaded length, which permits fine tuning of engagement height and preload in the clamping arrangement. How resistant is the surface to wear and corrosion? The blackened finish provides basic wear resistance and helps protect the surface in standard workshop environments; for aggressive conditions, further corrosion protection should be considered. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Pneumatic Clamp Horizontal Base, 4.5kN Thrust, 5.0kN Hold, 95° Arm, Zinc-Coated Heavy-Duty - Kukamet
Reliable production clamping that combines a zinc-plated heavy-duty arm with up to 5,000 N holding force delivers consistent, repeatable results for jigs and fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Pneumatikspanner 631 — horizontal-foot pneumatic clamp with 95° swing (Kukamet) The Pneumatikspanner 631 is a pneumatic clamp designed for secure, repeatable workholding in assembly, fixturing and light production environments, featuring a robust mounting foot and a heavy holding arm for stable clamping. Zinc-plated construction for corrosion resistance Massive holding arm for high rigidity Max holding force 5,000 N Horizontal-foot mounting, 95° swing Consistent clamping force for repeatable production The 631 model provides repeatable clamping through a combination of a sturdy actuator and a reinforced arm, ensuring parts remain stable during machining or assembly. With a max holding force of 5,000 N and an actuator force rated at 4,500 N, the unit converts pneumatic input into reliable mechanical restraint. This performance reduces setup variation and scrap rates, which supports higher throughput and predictable process outcomes. The clamp’s zinc-plated finish protects contact surfaces in busy shops and extends service intervals. Robust design for long service life and simple integration A massive holding arm and horizontal-foot mounting make the device straightforward to mount on fixtures and tooling plates while delivering high rigidity where it matters. The 180 mm arm gives a practical reach without compromising stiffness, so parts can be positioned and clamped from a convenient orientation. The compact footprint and 95° swing angle simplify integration into existing jigs; the format suits repetitive applications where quick pneumatic actuation replaces hand levers for consistent cycle times. Clear operational benefits and straightforward technical fit By converting compressed-air input into a dependable mechanical lock, this pneumatic clamp reduces manual handling and supports automated workflows. The construction and rated forces make it suitable for repetitive clamping tasks where stability and cycle reliability are priorities. For users less familiar with industrial clamping terms: the holding force indicates the maximum static restraint the unit can apply, while the actuator force describes the pneumatic push available to operate the mechanism—both determine whether a clamp is suitable for a given workpiece and process. For secure, repeatable clamping with proven workshop durability, contact Metav Werkzeuge for ordering and technical consultation — Metav’s team in Emmerich can advise on fixture integration and delivery options Technical data SKU: 631-5-D-C2 Model: 631 Manufacturer: Kukamet Category: Spanner eClass: 21021004 ETIM: EC011973 Core technical data Arm length: 180 mm Max holding force: 5,000 N Max actuator force: 4,500 N Swing angle: 95° Design & features Horizontal-foot mounting Zinc-plated material Massive holding arm Suitable for lever-clamp style applications FAQ What clamping force can be expected from this clamp? The Pneumatikspanner 631 offers a maximum holding force of 5,000 N, providing robust restraint for typical assembly and fixture tasks. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the horizontal-foot design simplifies attachment to plates and tooling bases and supports a 95° swing. Is the clamp suitable for harsh workshop environments? The zinc-plated finish provides corrosion resistance, making the unit suitable for standard workshop conditions where occasional exposure to moisture or oils occurs. What reach does the clamp arm provide? The arm length is 180 mm, offering practical reach for many jig and fixture layouts while maintaining stiffness for secure clamping. Who supplies and supports this clamp in Europe? Kukamet supplies the clamp; Metav Werkzeuge acts as the responsible partner for distribution and advice, offering fixture planning and delivery services. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Pneumatic Clamp Horizontal Foot, 4.5kN Push / 5kN Hold, Massive Holding Arm, 95° - Kukamet
Take advantage of the combination of high clamping force, robust zinc-plated construction and straightforward horizontal-foot mounting for consistent cycle-time performance; order directly via Metav Werkzeuge or consult our specialists for integration advice. 611 Pneumatic Clamp — Horizontal-foot mounting with 180 mm arm (Kukamet) The 611 pneumatic clamp is a production-grade pneumatic clamping unit designed for secure, repeatable holding in assembly and machining fixtures, mounted via a horizontal foot for compact installation. High holding force 5000 N 180 mm reach with massive holding arm Zinc-plated corrosion protection Pneumatic actuation for fast cycle times Reliable clamping power for automated workflows Built for repetitive production environments, the 611 pneumatic clamp delivers a measured holding force of 5000 N and an actuation force of 4500 N, providing the necessary clamping stability for downstream processes. The numerical specification of force indicates the maximum static retention and the actuator output respectively, enabling planners to match the clamp to fixture loads and safety factors. The clear rating of forces supports machine integration and risk assessments, reducing uncertainty in production planning. Robust materials and extended reach reduce rework The clamp’s zinc-plated body offers corrosion resistance suitable for workshop and light industrial atmospheres, while the massive holding arm gives mechanical rigidity during load application. An arm length of 180 mm increases effective reach without compromising stiffness, which helps to avoid part deformation and subsequent rework. These physical characteristics translate into fewer stoppages and a more predictable quality outcome on batch runs. Space-saving mounting and straightforward cycle integration A horizontal foot mounting keeps the unit low-profile on top plates and pallets, simplifying jig layout and enabling denser fixture packing. The clamp operates over a 95° travel angle, allowing reliable locking and release within typical fixture kinematics. Pneumatic actuation delivers fast, repeatable strokes that integrate directly with compressed-air control systems, improving takt time without adding complex electrical control. Maintenance is simplified by the uncomplicated mechanical design and the use of standard pneumatic ports. For reliable, workshop-ready clamping from Kukamet, contact Metav Werkzeuge to discuss application details or request a tailored quotation — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 611-5-D-C2 Manufacturer: Kukamet Name: Pneumatic clamp 611 Facts Actuation force: 4500 N Holding force: 5000 N Arm length: 180 mm Operating angle: 95° eClass: 21021004 ETIM: EC011973 Special features Material: zinc-plated Mounting: horizontal foot Massive holding arm Pneumatic actuation Catalog page available (PDF) FAQ What maximum holding force does the clamp provide? The clamp offers a maximum holding force of 5000 N, specified for static retention under normal operating conditions for the Kukamet pneumatic clamp (SKU 611-5-D-C2). Is the clamp suitable for integration into automated fixtures? Yes; pneumatic actuation and a compact horizontal-foot mounting make the unit suitable for automated assembly lines and palletised fixture systems. What is the arm reach and how does it affect fixture design? The arm provides an effective reach of 180 mm, allowing greater clearance for odd-shaped parts while maintaining rigidity with its massive holding arm construction. What corrosion protection is applied to the device? The body is zinc-plated, providing corrosion resistance appropriate for many workshop and light industrial environments. Which materials or process areas is this clamp most appropriate for? The design is intended for general production and assembly tasks where secure, repeatable clamping is required; selection should be confirmed against part geometry and process forces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp 2,000N Press Force, 6,000N Holding Force, 120° Heavy-Duty Arm, Blackened - Kukamet
High clamping reliability is delivered by the combination of a 6,000 N holding force, a robust 180 mm massive arm and a secure vertical foot; this makes the unit especially suitable for repetitive fixture work and ensures stable production cycles. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 242 — Vertical clamp with 180 mm massive arm by Kukamet The Vertikalspanner 242 is a vertical clamp optimised for heavy-duty fixture and jig applications, offering strong clamping and a compact footprint for integration into benches and tooling plates. Massive 180 mm holding arm for strong leverage Vertical foot for secure bench or fixture mounting Holding force up to 6,000 N for heavy-duty clamping Blackened finish for corrosion resistance and durability Dependable clamping power for production and jigs The clamping device provides a 6,000 N holding force combined with a 2,000 N pressing force, delivering a clear performance advantage where repeatable, secure holding is required. These rated forces translate into less slippage, reduced rework and a lower risk of part movement during machining or assembly. The 120° lever angle supports effective toggle action, converting operator input into strong, stable clamping without excessive travel. Presented as a compact vertical unit, this clamping solution suits serial operations and fixtures where consistent clamping behaviour is essential to maintain throughput and quality. Robust construction for long service life and simple installation Built with a massive 180 mm arm and a blackened finish, the clamp resists wear and offers enhanced surface protection against corrosion in workshop environments. The vertical foot mounting option allows secure attachment to benches or dedicated fixture plates and simplifies alignment in vertical orientations. With a listed mass of 2.376 kg, the unit provides tactile stability while remaining easy to handle during fitting. The solid construction reduces maintenance intervals and supports predictable performance over extended production runs, helping to keep downtime and total cost of ownership low. Integration into tooling and practical operational benefits The vertical design and compact profile make the clamp straightforward to include in jigs, assembly stations and dedicated fixtures. The combination of toggle mechanics and the 2,000 N pressing force permits firm clamping with clear open/close positions, which benefits automated or manual workflows that require quick, repeatable engagement. Because the clamp is engineered for mounting on a vertical plane, it minimises interference with adjacent tooling and preserves access to the workpiece. For applications that demand repeatability and robust retention, this type of lever clamp is a pragmatic choice that supports efficient cycle times and consistent results. If clarification is required on suitability for a specific fixture, technical advice is available to assist with integration choices. Contact Metav Werkzeuge for tailored advice and secure supply of the Kukamet Vertikalspanner 242 from our Emmerich warehouse; our specialists will advise on mounting and application integration Technical data Article number: 242-6-D-C3 GTIN: 8682843520864 Manufacturer: Kukamet Core data Arm length: 180 mm Holding force: 6,000 N Pressing force: 2,000 N Weight: 2.376 kg Lever angle: 120° Special features Material/finish: blackened finish Mounting type: vertical foot Massive holding arm Category: Spanner FAQ What holding force does the clamp provide? The clamp delivers a holding force of 6,000 N, suitable for heavy-duty clamping tasks in fixtures and jigs. Can the unit be mounted on a fixture plate? Yes, the vertical foot mounting allows secure attachment to benches and fixture plates for reliable integration. What is the arm length and why does it matter? The arm measures 180 mm; the extended lever improves mechanical advantage and aids consistent clamping pressure. Is the clamp suitable for serial production use? The design and rated forces make this clamp appropriate for repetitive production environments where repeatable clamping is required. Who supplies technical advice and availability for this clamp? Metav Werkzeuge can provide application guidance and supply details for the Kukamet Vertikalspanner 242 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp 2000N Press Force, Three-Point Massive Arm With Safety Lock, 100° - Kukamet
Take advantage of precise, repeatable clamping thanks to a robust 180 mm holding arm and a proven safety locking system; combine high retention capacity with easy fixture integration via the vertical foot and secure your production processes with confidence. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 242 — vertical workholding with a massive arm and safety lock A Vertical clamp 242 designed for secure fixture workholding where a long reach and reliable locking are required in assembly and machining applications Robust 180 mm holding arm Safety locking for secure clamping Max. holding force 6,000 N Vertical foot mounting for fixture plates Consistent clamping performance for machining and assembly The device delivers a clear technical advantage by separating pressing force and holding force: a pressing force of 2,000 N provides the necessary clamp actuation while a holding force of 6,000 N secures parts during machining and handling. This distinction ensures stable workpieces under lateral loads and vibration, reducing rework and downtime. The long 180 mm arm and its 100° operating angle provide practical reach for fixtures, while the massive holding arm minimises flex and maintains positional accuracy. Fast installation and safe, repeatable operation on fixture plates Designed with a vertical foot for direct mounting to fixture plates and tooling blocks, the clamp integrates into modular production setups with minimal adaptation. At 2.52 kg the unit is substantial enough to remain stable yet compact for dense fixture layouts. The safety locking mechanism holds the clamp securely in position during set-up and transport, reducing the risk of accidental release and improving operator confidence. The blackened finish gives a professional surface appearance and aids in routine visual inspection. Durable design that supports continuous workshop use Constructed for repetitive production use, the clamp combines a solid arm and straightforward locking elements to lower maintenance requirements and support long service intervals. The simple mechanical design makes inspection and part replacement practical without specialised tools, helping to keep throughput steady. For customers seeking predictable, robust workholding in small-batch or series production, this workholding device offers a reliable foundation for fixtures and jigs. Discuss Kukamet vertical clamp options with Metav Werkzeuge in Emmerich for tailored advice and assured supply of robust workholding components Technical data Article number: 242-6-D-L-C3 GTIN: 8682843520895 ECLASS: 21041717 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 180 mm Max. pressing force: 2,000 N Max. holding force: 6,000 N Angle: 100° Weight: 2.52 kg Special features Massive holding arm Safety locking mechanism Vertical foot mounting Blackened finish Category: clamps FAQ What is the difference between pressing force and holding force? The pressing force (2,000 N) is the actuation load that closes the clamp; the holding force (6,000 N) is the retention capacity that prevents part movement when the Vertical clamp 242 is locked. Can the clamp be mounted on standard fixture plates? Yes, the Vertical clamp 242 is supplied with a vertical foot for direct mounting on fixture plates and tooling blocks used in assembly and machining cells. Is the clamp suitable for repeated production cycles? The clamp’s massive arm and simple locking design are intended for repetitive use and low-maintenance environments, making it appropriate for continuous workshop operation. What material and finish does the clamp have? The unit has a blackened finish, which provides a professional surface appearance and facilitates visual inspection. Which SKU should be referenced when ordering or enquiring? Reference SKU 242-6-D-L-C3 when enquiring about this vertical clamp to ensure correct identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp 4,500N Closing Force, Massive Holding Arm, Blackened Finish - Kukamet
The combination of a massive holding arm, compact vertical mounting and a high holding capacity of 5,000 N ensures secure, repeatable clamping in confined fixtures; benefit from consistent workholding and reduced rework. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 212 — Vertical clamp with 180 mm arm by Kukamet The Vertikalspanner 212 is a compact vertical clamp engineered for solid workholding in jigs and small machine fixtures, offering high clamping reliability where space is limited. Massive 180 mm holding arm Vertical-foot mounting for stable set-up Up to 5,000 N holding force Blackened finish for corrosion resistance Reliable clamping that cuts rework and downtime The clamp delivers a defined holding force and a reliable clamping force, minimising slip and the need for repeated adjustments. With a maximum 5,000 N holding capability and a peak clamping force of 4,500 N, this device stabilises components during machining and assembly processes, helping to reduce scrap rates. The robust massive arm transfers force directly to the workpiece, promoting repeatable results and supporting steady cycle times in production and repair workshops. Space-efficient mounting for tight fixtures Designed with a vertical foot for direct, compact attachment, the unit integrates readily into confined set-ups and modular tooling plates. The 180 mm arm provides reach without requiring excessive clearance, while the overall mass and balance—at about 1.466 kg—keep the clamp unobtrusive on fixtures. This combination supports flexible placement in jigs and reduces the need to redesign existing tooling, allowing faster retrofit into established production lines. Finish and construction for long service life Surface treatment is a blackened finish, providing basic protection against corrosion and daily wear in workshop conditions. The straightforward, robust construction requires little upkeep; routine checks and light lubrication are usually sufficient to maintain consistent performance. The design emphasises durability and low maintenance, making it suitable for busy environments where dependable, long-term operation is required. Where it works best and what it improves Ideal for bench fixtures, small-indexing stations and assembly jigs, the clamp enhances workholding precision in repetitive operations. By providing steady, measurable clamping, it improves process reliability and helps increase overall throughput. The device is particularly well-suited to users seeking a compact lever-clamping solution that combines a substantial holding capacity with simple mounting and robust build quality. For reliable workshop clamping choose the Kukamet Vertikalspanner 212 via Metav Werkzeuge — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: B212-5-D-C2 GTIN: 8682843522370 Model: 212 Brand: Kukamet Facts Arm length: 180 mm Holding force (max): 5,000 N Clamping force (max): 4,500 N Weight: 1.466 kg eCl@ss: 21041717 ETIM: EC011973 Special features Material/finish: blackened finish (Schwarz brüniert) Mounting type: vertical foot Massive holding arm Category: Spanner Story trigger: lever clamp Catalog: 212-D-katalogseite.pdf FAQ What is the maximum holding force of this clamp? The maximum holding force is 5,000 N for the Vertikalspanner 212 from Kukamet, providing strong retention for demanding workholding tasks. How is the clamp mounted in a fixture? Mounting is via a vertical foot, allowing direct attachment to jigs and plates for compact, stable installation. Is the finish suitable for workshop environments? Yes, the blackened finish on the Kukamet vertical clamp offers basic corrosion resistance and supports low-maintenance operation. What is the arm length and how does it affect reach? The arm length is 180 mm, giving sufficient reach for many jig and fixture arrangements without occupying excessive space. Which SKU should be referenced when ordering or specifying this clamp? Use SKU B212-5-D-C2 when specifying or ordering the Kukamet Vertikalspanner 212. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp 4.5kN Clamping Force, Massive Holding Arm, Galvanised - Kukamet
Rely on the combination of a galvanised construction, a massive holding arm and up to 5,000 N of holding force for secure, repeatable workholding. Order the 212 Vertical Clamp directly via Metav Werkzeuge or ask our consultants if needed. 212 Vertical Clamp by Kukamet — galvanised lever clamp with 180 mm arm The 212 Vertical Clamp is a vertical lever clamp designed for secure fixture and jig applications in workshops and light industrial settings. 5,000 N secure holding force 180 mm solid holding arm Galvanised finish for corrosion protection Vertical foot mounting for stable installation Consistent clamping force for reliable production The clamp delivers a holding force of 5,000 N with a maximum pressing force of 4,500 N, offering a clear performance margin for repetitive tasks. This force profile reduces part movement during machining and assembly, which improves process stability and lowers scrap rates. The lever-style mechanism converts manual input into a robust, constant hold; technical users will appreciate the predictable force transmission when integrating the clamp into jigs or fixture plates. The numeric values provide a verifiable basis for selecting the correct workholding device for specific materials and cycle requirements. Durable construction that suits workshop conditions Constructed from galvanised steel and equipped with a massive holding arm, the clamp is built to withstand everyday workshop environments. The corrosion-resistant finish extends service life where humidity or coolant exposure is present, while the solid arm minimises flex under load. At approximately 1.466 kg, the unit balances rigidity with manageable mass for fixture design. The vertical foot mounting ensures a low-profile attachment point, allowing stable installation on bench tops or fixture plates without complex substructures. Fast mounting and repeatable operation save time Featuring a vertical-foot mounting arrangement and a proven lever clamp concept, the product enables quick installation and repeatable clamping cycles. This supports higher throughput by cutting setup time in jigs and reducing manual rework. The 180 mm arm provides reach where workpieces require lateral clearance; the substantial arm geometry also aids in maintaining clamping trajectory over repeated cycles. Assistance is available from Metav Werkzeuge for specification checks and integration advice to ensure the clamp suits the application and fixture layout. Contact Metav Werkzeuge today to specify the Kukamet 212 Vertical Clamp for secure fixture setups and to request tailored advice from our specialists. Technical data SKU: 212-5-D-C2 GTIN: 8680731501780 Manufacturer: Kukamet Weight: 1.466 kg Material: Galvanised steel Facts Arm length: 180 mm Holding force: 5,000 N Maximum pressing force: 4,500 N Special features Mounting: vertical foot Massive holding arm Lever clamp type Category: Clamps (Spanner) FAQ What is the maximum holding force of the 212 Vertical Clamp? The 212 Vertical Clamp provides a holding force of up to 5,000 N, suitable for many fixture and jig applications. What material and finish does the clamp have? The clamp is made of galvanised steel, offering corrosion resistance for workshop environments. How is the clamp mounted? Mounting is via a vertical foot, enabling a stable, low-profile attachment to fixture plates or workbenches. Is the 180 mm arm suitable for larger workpieces? The 180 mm solid holding arm provides extended reach and additional clearance for parts where lateral space is required. Can the clamp be used in production fixtures with repeated cycles? Yes, the lever clamp design offers repeatable clamping cycles and predictable force transmission for production use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Horizontal Base, 5,000N Holding Force, Robust Arm & Safety Lock - Kukamet
Combine robust holding force and a massive holding arm with safety lock for secure, repeatable clamping; order the unit directly via Metav Werkzeuge or consult our technical advisors for application support. Vertikalspanner 211 – vertical clamp with 180 mm arm and 5,000 N holding force (Kukamet) The Vertikalspanner 211 is a vertical clamping device designed for secure workpiece fixation in workshops and light production environments, offering a compact footprint and reliable locking for repetitive clamping tasks. Vertical clamp »211« by Kukamet Massive holding arm with safety lock Max. holding force 5,000 N Horizontal foot for stable mounting Dependable clamping performance for repetitive processes The clamp delivers a holding force 5,000 N and a clamping force 4,500 N, values that indicate the device's capacity to maintain workpiece position under processing loads. In practice, the distinction between holding and clamping force matters: the holding force describes retention under shear or pull-off, while the clamping force refers to the pressure applied to the workpiece surface. This combination ensures that the component stays put during machining, measuring or assembly steps, reducing rework and cycle-time losses. The specification set supports planning for fixtures and tooling layouts where consistent clamp performance is required. Robust construction that reduces setup interruptions Built with a massive holding arm and a safety lock, the unit is engineered to resist wear from frequent operation. The mechanism uses a horizontal-foot mounting to provide lateral stability on jigs and plates; the blackened finish offers corrosion resistance and a professional surface appearance. At approximately 1.51 kg, the device balances solidity and manageable handling during fixture assembly, allowing technicians to position and secure clamps quickly while maintaining a high level of operational safety through the integrated locking feature. Space-saving design with flexible mounting options Featuring an 180 mm arm, this vertical clamp occupies little vertical space while providing sufficient reach for many typical setups. The horizontal foot is suitable for mounting to plates, fixture bases or tooling blocks, enabling flexible placement in confined workstations. The compact footprint and conservative mass make the device appropriate where multiple clamps are required on a single jig, promoting efficient use of bench space and straightforward integration into existing clamping schemes. Built for workshop reliability and predictable supply Manufactured by Kukamet and offered through Metav's distribution, the clamp is intended for workshops and light production where repeatable, low-maintenance components are essential. The simple mechanical design minimises routine maintenance needs and supports predictable uptime. For complex fixtures or unusual materials, the specification data and the clamp's features allow planners to assess suitability quickly and incorporate the device into broader production or inspection processes. For a tailored recommendation on integrating the Kukamet vertical clamp into fixtures or small-series production, contact Metav Werkzeuge for reliable advice and supply from Emmerich: +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: B211-5-D-L-C2 Designation: Vertikalspanner 211 Manufacturer: Kukamet Material / finish: blackened finish Mounting: horizontal foot Core specifications Arm length: 180 mm Weight: 1.51 kg Max. holding force: 5,000 N Max. clamping force: 4,500 N eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Safety lock Horizontal-foot mounting Compact design for fixture use FAQ What is the difference between holding force and clamping force? The holding force describes retained load (here 5,000 N) while the clamping force (4,500 N) is the pressure applied to the workpiece; the Vertikalspanner 211 specifies both for reliable fixture design. Can the clamp be mounted on custom fixture plates? Yes, the horizontal foot is suitable for mounting on plates or tooling blocks, enabling the clamp to be integrated into customised fixtures. Is the device suitable for frequent operation in production? The robust design with a massive holding arm and safety lock makes the clamp appropriate for repetitive use in workshops and light production environments. What surface finish does the clamp have and why does it matter? The clamp has a blackened finish, which improves corrosion resistance and provides a durable surface for prolonged workshop use. What are the typical applications for this vertical clamp? Typical uses include workpiece positioning, holding during measuring operations, light machining and repetitive assembly tasks where secure vertical clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Massive Holding Arm, 4.5kN Thrust / 5kN Hold, Zinc-Plated - Kukamet
Take advantage of the combination of durable construction, high holding force and compact integration for reliable fixture clamping in production and workshop environments. Built with a galvanised finish, a 180 mm arm and a 5,000 N holding capacity, the unit delivers secure positioning with low upkeep. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants for tailored advice. Vertical clamp 211 — Kukamet vertical toggle clamp with 180 mm arm and 5,000 N holding force The Vertical clamp 211 is a compact vertical toggle clamp designed for workshop jigs, assembly stations and light production fixtures, combining a robust holding mechanism with corrosion-resistant construction. 5,000 N holding capacity 4,500 N clamping force 180 mm arm length Galvanised, corrosion-resistant finish Secure clamping performance for repetitive operations The clamp provides notably high static retention: a 5,000 N holding force and a 4,500 N clamping force ensure components remain fixed during machining, welding or assembly. Measured forces are expressed in Newtons to enable direct comparison with machine specifications and fixture requirements; this makes selection straightforward for planning production processes. The rigid design reduces micro-movement in the workpiece, which supports consistent tolerances and fewer rejects. By choosing a device with defined mechanical characteristics, process reliability is increased and cycle-time optimisation becomes easier to calculate. Designed to integrate and endure in workshop environments Constructed with a galvanised finish and a massive holding arm, the clamp resists surface corrosion and maintains mechanical accuracy over prolonged service. The horizontal foot mounting enables straightforward installation onto plates and fixture bases, while the 180 mm arm extends reach without compromising stability. At a lightweight 1.468 kg, the unit is easy to position during jig assembly yet robust enough to withstand daily operational stress. The combination of durable materials and compact geometry simplifies retrofitting into existing tooling setups and reduces the need for frequent replacement. Low-maintenance handling and sourcing confidence Maintenance requirements are minimal due to the corrosion-resistant coating and the simple mechanical toggle action; routine inspection and lubrication suffice to preserve performance. Supplied under the Kukamet brand and available through Metav Werkzeuge, the clamp benefits from a tested supply chain and European distribution. Metav’s role as a quality filter for the market supports dependable delivery and product traceability, which is particularly valuable when specifying fixtures for series production. The clear specification and consistent sourcing contribute to predictable long-term availability for maintenance and extension of existing jigs. For robust, corrosion-resistant clamping with dependable holding capacity choose the Kukamet vertical clamp 211—contact Metav Werkzeuge in Emmerich for advice and order placement via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 211-5-D-C2 GTIN: 8680731501414 Manufacturer: Kukamet Material: galvanised Mounting: horizontal foot Facts Arm length: 180 mm Holding force max: 5000 N Clamping force max: 4500 N Weight: 1.468 kg eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Galvanised finish Horizontal-foot mounting Category: Clamps FAQ What is the maximum holding capacity of this clamp? The clamp provides a maximum holding capacity of 5,000 N as specified for the Kukamet vertical clamp 211 (SKU 211-5-D-C2). Can the clamp be mounted directly to a fixture plate? Yes, the horizontal-foot mounting allows direct fastening to fixture plates and bases for secure integration into jigs. Is the finishing suitable for humid or workshop conditions? The galvanised finish on the vertical clamp 211 gives improved corrosion resistance, making it suitable for typical workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Massive Holding Arm, 4.5kN Thrust, 5kN Hold Force - Kukamet
Take advantage of proven clamping performance, robust construction and a compact 180 mm reach to keep setups precise and efficient. The combination of a massive holding arm, 5,000 N maximum holding force and a horizontal-foot mounting supports secure workpiece positioning and repeatable machining results. Order the clamp directly via Metav Werkzeuge or ask the consultants for specification advice. Vertical clamp 211 (B211-5-D-C2) — 180 mm arm, 5 kN holding force — Kukamet Vertical clamp 211 is a lever-operated vertical clamp intended for secure workpiece holding in machining, assembly and testing applications Massive holding arm for stable clamping 180 mm arm for extended reach 5,000 N maximum holding force Horizontal-foot mounting for secure base Secure, measurable clamping that reduces rework The clamp delivers a quantifiable holding performance: a maximum holding force of 5,000 N combined with a maximum pressing force of 4,500 N gives a reliable safety margin for typical workshop operations. The specified forces translate directly into improved positional stability during machining, lowering the risk of vibration-induced errors and material rejects. The 180 mm arm provides a practical working clearance for fixturing while keeping the overall footprint compact, which helps maintain throughput on benches and fixtures without complex repositioning or additional supports. Robust construction for faster setup and longer service life A massive holding arm and a blackened burnished finish create a durable clamp that resists wear under repetitive use. The lever-operated design enables quick engagement and release, shortening cycle times during batch work and repeated clamping operations. With a weight of 1.468 kg, the unit balances solidity and manoeuvrability for fitters and machinists who adjust fixtures frequently. The horizontal-foot mounting provides a stable base that integrates easily into existing plates or tooling blocks, reducing the need for bespoke adaptors and saving assembly time. Easy integration into production workflows and low maintenance The lever clamp concept supports fast, repeatable clamping with minimal adjustment, which benefits jigs, assembly stations and inspection setups seeking predictable results. The component’s finish and simple mechanical design keep maintenance demands low: periodic checks of the lever pivot and a light lubrication cycle are generally sufficient to maintain function. Supplied as a compact, lever-operated clamp, the B211-5-D-C2 model fits typical workshop and production environments and can be combined with common fixturing elements to increase output reliability without complex retrofits. Choose Kukamet’s vertical clamp 211 for consistent clamping performance—contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data SKU: B211-5-D-C2 GTIN: 8680731507782 Manufacturer: Kukamet Eclass: 21041717 ETIM: EC011973 Material finish: blackened burnished Core specifications Arm length: 180 mm Max pressing force: 4,500 N Max holding force: 5,000 N Weight: 1.468 kg Special features Mounting type: horizontal foot Massive holding arm Lever-operated vertical clamp Story trigger: lever clamp FAQ How much holding force does the clamp provide? The Kukamet vertical clamp 211 provides a maximum holding force of 5,000 N and a maximum pressing force of 4,500 N for secure fixturing. What is the arm length and how does it affect application? The arm length is 180 mm, which gives extra reach for workpieces while maintaining a compact footprint suitable for benches and fixture plates. Which mounting option is available for this clamp? The unit is supplied with a horizontal-foot mounting, designed to be fixed to tooling plates or machine fixtures for a stable base. What material finish does the clamp have and why is it beneficial? The clamp features a blackened burnished finish, providing enhanced surface protection and resistance to wear in workshop environments. Is this clamp suitable for repetitive production use? Yes; the robust construction, lever operation and low maintenance needs make the clamp appropriate for repeated clamping cycles in production and assembly contexts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Vertical Base, 4.5kN Thrust, 5kN Holding Force, Zinc Plated - Kukamet
Robust clamping performance meets compact design: the galvanised construction and massive holding arm deliver high repeatability and secure fixture retention under up to 5,000 N holding force and 4,500 N pressing force. Order directly via Metav Werkzeuge or request guidance from our consultants for application-specific selection. Vertical clamp 212 — Vertical clamp with 5,000 N holding force, galvanised (Kukamet) A vertical clamp 212 engineered for secure workpiece retention in jigs and assembly fixtures, combining a sturdy vertical foot with a safety locking mechanism for repeatable operation. Massive holding arm with safety lock 5,000 N maximum holding force 4,500 N pressing force capacity Galvanised finish for corrosion resistance High clamping force for consistent cycle times The clamp provides 5,000 N holding force and 4,500 N pressing force, values that translate into reliable, repeatable retention during machining and assembly operations. High clamping capability reduces part movement and rejects, improving first-pass yield and lowering rework rates. The numerical specification of force enables planners to select the device based on calculated clamping requirements; where a specific clamping load is required, the force figures act as a direct basis for machine and fixture design decisions. The compact mass ensures a favourable power-to-weight ratio, supporting automated or manual applications without excessive inertia. Durable components for low maintenance and long service life Constructed with a galvanised finish and a massive holding arm, the device resists wear and environmental exposure in busy workshop settings. The robust locking mechanism secures the arm in the clamped position and prevents accidental release, contributing to operator safety and process stability. Material and design choices reduce the frequency of adjustment and replacement, which lowers lifecycle maintenance and downtime. The overall mass of 1.32 kg balances solidity with ease of integration into multi-clamp fixtures and modular tooling systems. Fast installation and adaptable mounting for versatile use Supplied with a vertical foot mounting arrangement and an arm length of 180 mm, the clamp fits common fixture geometries while offering sufficient reach for many part profiles. The vertical mounting keeps the clamping action clear of critical tool zones, simplifying collision planning in CNC setups and assembly stations. The compact footprint and clear performance data make it suitable for small-batch fixtures as well as larger production jigs, enabling quick specification changes and faster tooling cycles. Integration into standard fixture plates is straightforward, allowing planners to standardise clamping across different assemblies for more efficient spare-part management. Contact Metav Werkzeuge for technical advice on integrating the Kukamet vertical clamp 212 into production fixtures; Metav’s Emmerich-based team provides product expertise and supply reliability to support seamless procurement and deployment Technical data Article number: 212-5-D-L-C2 GTIN: 8680731501810 Manufacturer: Kukamet Facts Weight: 1.32 kg Arm length: 180 mm Pressing force (max): 4,500 N Holding force (max): 5,000 N ECLASS: 21041717 ETIM: EC011973 Special features Galvanised finish Vertical foot mounting Massive holding arm Safety locking mechanism Category: Clamps FAQ What maximum holding force does the clamp provide? The Kukamet vertical clamp 212 offers a maximum holding force of 5,000 N, specified for reliable retention in fixtures and assembly jigs. Is the clamp suitable for harsh workshop environments? Yes, the galvanised finish on the clamping device gives improved resistance to corrosion and workshop contaminants, extending service life under typical industrial conditions. How is the clamp mounted in a fixture? The unit uses a vertical foot mounting arrangement with an 180 mm arm reach, enabling direct attachment to fixture plates or subplates in vertical clamping configurations. Can the clamp be used in automated production cells? The clamp’s compact mass (1.32 kg), clear force ratings and secure safety lock make it suitable for integration in both manual and automated fixtures where defined clamping forces are required. What is the article number or SKU for ordering? Ordering reference: 212-5-D-L-C2 (SKU). The same identifier is used for stock and logistic purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Vertical Base, Massive Holding Arm And Safety Locking, 4.5kN Pressure/5kN Holding Force - Kukamet
Take advantage of the massive holding arm, safety interlock and high clamping capacity to secure workpieces reliably in production and assembly fixtures. The compact design and 180 mm reach support efficient handling and quick fixture changes. Order via Metav Werkzeuge or consult our specialists for integration advice. Vertikalspanner 212 – vertical toggle clamp with 180 mm arm and safety interlock The Vertikalspanner 212 is a vertical toggle clamp designed for secure, repeatable fixation of workpieces in jigs, welding fixtures and assembly lines. Massive holding arm with safety interlock 180 mm arm length for extended reach Clamping force up to 4,500 N Holding force rated at 5,000 N Blackened burnished finish for corrosion resistance Reliable hold with integrated safety The clamp delivers a secure, repeatable clamping action thanks to the massive holding arm and integrated safety interlock, which prevents unintended release during operation. This design reduces rework and minimises the need for manual re-tightening, supporting a steadier production rhythm and fewer process interruptions. The locking mechanism is engineered for visible engagement and clear tactile feedback, which aids assembly-line operators and fixture designers alike. Heavy-duty clamping in a compact form Engineered for demanding applications, the device provides a clamping force of 4,500 N and a holding force of 5,000 N, enabling the secure fixation of robust components. The 180 mm arm length increases reach without compromising stability, while the overall mass of 1.32 kg keeps the clamp easy to position and replace in modular fixtures. These figures translate into practical benefits: consistent clamping pressure across cycles and reduced fixture size compared with bulkier alternatives, which helps to streamline tool layouts and save bench space. Durable finishing and straightforward mounting Finished in a blackened burnished finish, the clamp resists surface wear and offers basic corrosion protection suitable for workshop and light industrial environments. The vertical foot mounting simplifies attachment to plates and bases commonly used in jig construction, allowing fast retrofit or installation in new fixtures. Together, the material treatment and mounting concept promote longevity and consistent performance under repetitive use, supporting long-term operational reliability. For reliable clamping solutions based on Kukamet quality characteristics, contact Metav Werkzeuge to discuss the Vertikalspanner 212 (SKU B212-5-D-L-C2) and suitability for specific fixtures — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: B212-5-D-L-C2 Model: 212 Manufacturer: Kukamet Category: Spanner Core technical figures Clamping force: 4,500 N Holding force: 5,000 N Arm length: 180 mm Weight: 1.32 kg Special features Massive holding arm Safety interlock Mounting: vertical foot Finish: blackened burnished Suitable for use as a lever/toggle clamp FAQ What applications suit this vertical toggle clamp best? The Vertikalspanner 212 is suitable for jigs, welding fixtures and assembly stations where secure, repeatable clamping is required; its force ratings support medium to heavy workpieces. How much clamping force does the clamp provide? The clamp provides a clamping force of 4,500 N and a holding force rated at 5,000 N, values that enable reliable fixation of robust components in production settings. How is the clamp mounted to a fixture? Mounting is via a vertical foot, designed for direct attachment to base plates and fixture plates common in jig and fixture construction. What surface protection does the clamp have? The clamp features a blackened burnished finish that offers enhanced surface durability and basic corrosion resistance for workshop environments. What is the arm reach and how heavy is the unit? The arm reach is 180 mm and the unit weight is 1.32 kg, combining extended reach with a compact, easy-to-handle form factor. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com