Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
162mm Vertical Clamp With Vertical Foot, 1.2kN Thrust, 1.4kN Holding Force, Blackened Steel - Kukamet
Take advantage of a compact, high‑force clamping solution that combines a robust 162 mm holding arm, up to 1,400 N holding force and a corrosion‑resistant finish for dependable fixture work; order supply and technical advice via Metav Werkzeuge for smooth integration into workshop production. Vertical Clamp 212 (B212-2-D-L-C3) — 162 mm arm, 1,400 N holding force by Kukamet Vertical Clamp 212 is a vertical‑foot workholding device engineered for reliable clamping in light to medium industrial fixtures and jigs. Robust 162 mm holding arm and safety lock Up to 1,400 N holding force Corrosion‑resistant blued finish Lightweight at 0.21 kg for easy mounting Compact design that keeps fixtures precise The Vertical Clamp 212 delivers concentrated holding force in a compact package, making it suitable where space is limited but stability is essential. With a 162 mm arm and 1,400 N maximum holding capacity, the clamp secures small parts reliably during machining and assembly. The ratio of holding power to mass — at just 0.21 kg — reduces additional load on fixtures and enables simpler jigs without sacrificing clamping performance. For purchasers seeking measurable, repeatable results, this balance of size and force supports shorter setup times and fewer reworks. Measurable performance for process reliability Two distinct force parameters define application performance: the holding force of 1,400 N ensures a sustained grip on components, while the maximum pressing force of 1,200 N indicates the device’s capacity during actuation. Explaining these figures helps planners choose the right clamp for specific materials and operations: holding force resists part movement in use, pressing force relates to the actuation effort and contact pressure. This separation of terms supports efficient decision making in toolroom and production planning and reduces the risk of underspecified clamping. Safe operation and long service life Designed with a massive holding arm and integrated safety lock, the unit prevents unexpected release during processing and adds an extra layer of operator safety. The blued (blackened) finish provides corrosion resistance and a reduced surface shine that is beneficial in workshop environments. These design choices lower maintenance needs and extend service intervals, meaning less downtime and a longer effective service life for the clamping hardware. Simple integration into workshop systems Mounting via the vertical foot enables straightforward installation on benches, fixture plates or custom jigs, and the clamp’s modest weight keeps handling and positioning easy. The device matches well with standard fixture workflows in machine shops and assembly cells where consistent, repeatable clamping is required. For buyers who value a trustable supply chain, Metav combines broad availability with expert advice and a European quality filter that supports reliable procurement and predictable replenishment. For technical procurement or application advice on the Kukamet Vertical Clamp 212, contact Metav Werkzeuge to arrange supply and guidance: call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B212-2-D-L-C3 ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 162 mm Holding force (max): 1,400 N Pressing force (max): 1,200 N Weight: 0.21 kg Special features Attachment type: vertical foot Finish: blackened (blued) Massive holding arm and safety lock Material appearance: blackened/brünierte surface Brand: Kukamet FAQ What clamping capacity does this clamp provide? The Vertical Clamp 212 from Kukamet offers a maximum holding force of 1,400 N and a pressing force up to 1,200 N, suitable for many light to medium workshop fixtures. Is the clamp suitable for corrosion‑prone environments? The clamp features a blackened (blued) finish that increases resistance to corrosion and is suited for typical workshop conditions. How is the clamp mounted to a fixture plate? Mounting is via the vertical foot configuration, allowing direct attachment to benches or fixture plates in jigs and tooling assemblies. What safety features are integrated in the design? The device includes a massive holding arm and an integrated safety lock that prevents unintended release during machining or handling. Which SKU should be referenced when ordering or specifying? Reference SKU B212-2-D-L-C3 when specifying or ordering the Kukamet Vertical Clamp 212. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
162mm Vertical Clamp With Vertical Foot, Heavy Holding Arm, Safety Lock, 1,200N Thrust/1,400N Hold, Zinc-Plated - Kukamet
Combine strong clamping performance with a massive holding arm and a secure safety lock for dependable fixture work; order the Vertical Clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical Clamp 212 by Kukamet — Massive holding arm & 1,200 N clamping force The Vertical Clamp 212 is a compact vertical clamping device designed for secure workpiece fixation in jigs, fixtures and assembly applications. Massive holding arm with safety lock Zinc-plated for corrosion resistance 1,200 N clamping force, 1,400 N holding force Compact 162 mm arm, lightweight 0.21 kg Consistent clamping force for repeatable results The clamp delivers a defined clamping force of 1,200 N and a holding force of 1,400 N, values that ensure reliable fixation during machining, assembly and inspection tasks. These figures describe the actionable pressure applied during the clamping action and the maximum load the latch will retain; translated into shop-floor practice, this means repeatable clamping with reduced slippage and fewer rejected parts. The lever-driven mechanism converts manual input into stable force, enabling predictable setup times and consistent process outcomes across batches. Robust construction for daily workshop use Constructed from zinc-plated steel with a massive holding arm, the device is built to resist wear and corrosion in demanding environments. The vertical mounting foot provides a secure attachment point for machine tables and fixture plates; the 162 mm arm gives an effective reach while keeping the overall footprint compact. At 0.21 kg, the clamp is lightweight enough for quick retrofitting yet substantial where rigidity matters. The integrated safety lock prevents accidental release, improving operator safety and reducing the risk of workpiece damage during handling or vibration-prone operations. Practical integration into jigs and production fixtures The clamp’s vertical orientation and lever action make it suitable for horizontal and vertical fixtures where overhead clearance is limited. The compact design supports simple retrofit into modular fixturing systems or custom jigs without extensive modification. Because the mechanism is manual and mechanically straightforward, maintenance requirements are minimal: periodic inspection and lubrication keep the clamp performing reliably. For production environments seeking predictable manual clamping with low complexity, this clamp provides a pragmatic balance of force, durability and ease of use. Contact Metav Werkzeuge for application advice, to request a quote for the Kukamet Vertical Clamp 212 or to discuss fixture integration by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 212-2-D-L-C3 GTIN: 8680731501568 Eclass: 21041717 ETIM: EC011973 Facts Clamping force max: 1,200 N Holding force max: 1,400 N Arm length: 162 mm Weight: 0.21 kg Special features Material: zinc-plated Mounting: vertical foot Massive holding arm Safety lock FAQ What clamping and holding forces does the clamp provide? The clamp offers a clamping force of 1,200 N and a holding force of 1,400 N, values suitable for secure manual fixation in fixtures where repeatable pressure is required. Can the clamp be mounted on standard fixture plates? Yes. The vertical foot design allows the clamp to be fixed to machine tables or fixture plates for straightforward integration into jigs and assemblies. Is the surface protected against corrosion? The clamp is zinc-plated, providing corrosion resistance appropriate for workshop and industrial environments. Does the clamp include a safety mechanism to prevent accidental release? A dedicated safety lock is integrated to secure the lever in the closed position and reduce the risk of unintended opening under load. What is the effective reach of the clamp arm? The device features a 162 mm arm, offering a balance between reach and compact installation space. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1650 N Clamping Force Horizontal Base Toggle Clamp With Hook, Zinc Plated - Kukamet
Take advantage of the combination of robust galvanised corrosion protection, a compact horizontal mounting base, and proven clamping and holding forces for reliable fixture performance; order the locking clamp directly via Metav Werkzeuge or consult the Metav team for specification advice. Locking clamp 362 — horizontal-base toggle clamp, galvanised (Kukamet) A Locking clamp 362 designed for secure, repeatable clamping on jigs and fixtures, featuring a horizontal foot for stable mounting and an integrated hook for versatile applications. Galvanised corrosion protection Horizontal mounting base Clamping force 1,400 N Integrated hook, 25 mm thread length Proven clamping performance for production use The Locking clamp 362 delivers consistent results through a defined clamping force of 1,400 N and a higher holding force of 1,650 N, values that translate directly into secure workholding under dynamic load. These numerical ratings indicate the clamp’s capacity to resist displacement during machining or assembly; in practice this means fewer re-checks and improved cycle consistency. The galvanised finish contributes to long-term dimensional reliability by limiting corrosion on critical surfaces, while the compact mass of 0.14 kg keeps moving parts light and responsive. Space-saving design that speeds up set-up A horizontal-foot mounting arrangement enables easy installation on jigs, fixtures and assembly tables, where a low profile is essential. The integrated hook together with a 25 mm thread length provides adjustment range for variable material thicknesses without changing attachments, reducing downtime between jobs. The clamp’s lever action is optimised for rapid engagement and repeatability, supporting efficient batch processing and reducing manual repositioning. These characteristics make the component suitable for small-batch work as well as integration into automated production fixtures. Built for durability and dependable supply Constructed from galvanised steel and presented as a lever-style clamp, the device is intended to withstand everyday workshop stresses with minimal upkeep; periodic inspection and light lubrication of the pivot points are sufficient for prolonged service life. Supplied by Kukamet and distributed via Metav Werkzeuge, the part benefits from established logistics and quality oversight at the Emmerich location, offering reliable availability for workshops and production lines. For applications that demand consistent clamping and uncomplicated installation, this clamp provides a pragmatic balance of robustness and simplicity. Choose the Kukamet locking clamp 362 through Metav Werkzeuge for dependable clamping in jigs and fixtures — contact Metav Werkzeuge for tailored advice or detailed specifications at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 362-1 GTIN: 8680731505160 ECLASS: 21041718 ETIM: EC011973 Material: galvanised Core technical data Weight: 0.14 kg Clamping force: 1,400 N Holding force: 1,650 N Thread length: 25 mm Special features Horizontal foot mounting With hook Lever-style clamp (hebelspanner) Category: Spanner SKU: 362-1 Manufacturer: Kukamet FAQ What clamping force can be expected from this clamp? The clamp provides a clamping force of 1,400 N and a holding force of 1,650 N, suitable for secure workholding in many fixture and assembly applications. Is the clamp suitable for repeated industrial use? Yes, the galvanised finish and lever design make the clamp suitable for repeated cycles; light maintenance of pivot points is recommended to preserve performance. How is the clamp mounted and adjusted? Mounting is via a horizontal foot; adjustment is achieved using the integrated hook and the 25 mm thread for compensating material thickness. Which materials is the clamp compatible with? The clamp serves as a mechanical workholding device and can be used with fixtures that secure a wide range of materials; selection should match the required clamping pressure and fixture design. What are the dimensions and weight? The unit weighs 0.14 kg and features a 25 mm thread length; further dimensional details are available on request via Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
167mm Extension Lever For Clamp, 13.5mm Width, 5mm Thickness - Kukamet
Take advantage of a robust metal construction combined with a compact form factor — the extension lever delivers dependable mechanical advantage while remaining lightweight for easy handling; order the extension lever directly via Metav Werkzeuge or consult our specialists for application guidance. Extension lever »220« – extension handle for toggle clamps, metal, 167 mm The Extension lever »220« provides a durable handle extension for toggle clamps and similar clamping equipment, designed to increase leverage and improve operator ergonomics in assembly and workshop applications. Solid metal construction for long service life 167 mm overall height for extended reach Lightweight at approximately 75 g for easy handling Compatible with standard toggle clamp fittings Greater leverage with a compact, durable design The metal construction of this extension handle offers a reliable upgrade to existing clamping setups, providing increased torque transmission without significant added mass. With an overall height of 167 mm and a nominal weight of 75 g, the component enhances operator leverage while keeping the dynamic load on the clamp low. This makes it suitable for repeated manual operations in production or repair environments, where small improvements in handling speed and fatigue reduction translate to measurable workflow gains. Simplified integration and clear identification Designed for straightforward interchangeability with common toggle clamp fittings, the part is easy to identify and track thanks to the SKU 220-2-06-C1 and the associated GTIN 4061905079498. The compact cross-section — width 13.5 mm and thickness 5 mm — enables fitting in confined jigs and fixtures, allowing retrofitting without major fixture redesign. The concise geometry also aids in predictable force transmission, which supports process stability and repeatable clamping performance. Practical benefits for workshop and production use Beyond raw durability, the extension handle contributes to ergonomic improvements and reduced cycle times by enabling faster, more comfortable actuation of toggle clamps. The lightweight, metal build minimises additional inertial effects, helping to preserve clamp life and avoid unintended stress on pivot points. In workshops where many manual clamping cycles occur daily, this small component can support consistent quality and operator well‑being. Choose the Kukamet extension lever for tried-and-tested robustness — contact Metav Werkzeuge for procurement details or bespoke advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 220-2-06-C1 GTIN: 4061905079498 Brand: Kukamet Measurements Height: 167 mm Width: 13.5 mm Thickness: 5 mm Weight: 0.075 kg Features Material: Metal Category: Spanner / toggle clamp extension Application hint: lever extension for clamping systems FAQ What is the primary use of this extension lever? The extension lever is used to extend the handle of toggle clamps and similar clamping devices to improve leverage and ergonomics during manual clamping operations. Is the lever compatible with standard toggle clamps? Compatibility with standard toggle clamp fittings is intended; the Extension lever »220« is dimensioned for easy integration in typical jigs and fixtures. What material is the extension handle made from? The extension handle is manufactured from metal, chosen for durability and reliable force transmission in workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
167mm Vertical Clamp 2000N Closing Force, Massive Arm with Safety Lock, Blackened Finish - Kukamet
A compact, high-force clamp designed for secure, repeatable fixture work: robust massive holding arm and safety locking mechanism combine with a 167 mm reach and a low mass of 0.37 kg for easy integration into bench-top jigs. Order the Vertikalspanner directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 212 – Vertical clamp with 167 mm arm, 2,000 N clamping force (Kukamet) The Vertikalspanner 212 is a vertical clamp engineered for secure, repeatable clamping in assembly and workshop fixtures. Massive holding arm with safety lock 167 mm arm for extended reach Vertical-foot mounting for bench installation Up to 2,500 N holding force Reliable clamping performance for consistent production The clamp delivers defined clamping and retention values: a maximum clamping force of 2,000 N and a maximum holding force of 2,500 N. These figures describe the applied downward force during operation and the secure retention once locked. Engineers and technicians benefit from repeatable clamping that reduces setup variability and supports steady cycle times on jigs and fixtures. Clear numerical values enable straightforward integration into force budgets and safety calculations. Built for safe, repetitive operation A massive holding arm and a dedicated safety locking mechanism prioritise operator protection and process reliability. The heavy-duty arm improves resistance to bending under load, while the locking feature prevents accidental release during machining, assembly or transport of a fixed workpiece. The blackened finish provides corrosion resistance and a matt surface that reduces glare and visible wear, supporting a professional workshop standard and long-term service life. Compact design eases retrofit and fixture layout With a reach of 167 mm and a net weight of 0.37 kg, the clamp is compact yet substantial enough for demanding tasks. The vertical-foot mounting simplifies attachment to benches, plates or fixture bases without requiring large clearances, allowing close-packed fixture designs and efficient use of workbench space. The low mass contributes to easier manual handling during jigs assembly and reduces added load on lighter fixtures. Clear suitability and straightforward upkeep The unit suits assembly, holding and clamping tasks in small-batch production and workshop environments where secure retention and quick cycle changes matter. Maintenance is simple: regular inspection of the locking mechanism, light lubrication of pivot points and visual checks on the arm finish preserve reliable operation and prolong service life. Specification-driven design supports engineers in selecting the clamp where defined force and compact mounting are required. For secure, repeatable clamping choose Kukamet’s Vertikalspanner 212—contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich. Technical Data Article number: B212-3-D-L-C3 Manufacturer: Kukamet Category: Clamps Core specifications Arm length: 167 mm Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.37 kg Features & finish Mounting: vertical foot Material/finish: blackened finish Massive holding arm Safety locking mechanism FAQ What forces does the clamp provide and what do they mean? The Vertikalspanner 212 specifies a maximum clamping force of 2,000 N (applied force during engagement) and a maximum holding force of 2,500 N (retention once locked), which helps dimension fixtures and safety margins. How is the clamp mounted to a bench or fixture? Mounting is via a vertical foot design, allowing the clamp to be fastened directly to bench tops or fixture plates for compact installation. Is the arm suitable for heavy-duty use and does it resist wear? The product features a massive holding arm and a blackened finish that increases surface durability and reduces visible wear in workshop use. What maintenance is recommended to keep reliable operation? Periodic inspection of the safety locking mechanism, light lubrication of moving joints and visual checks of the arm finish are recommended to maintain performance. Which SKU should be referenced when ordering or specifying this clamp? Reference SKU B212-3-D-L-C3 when ordering or specifying the vertical clamp to ensure correct identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
167mm Vertical Clamp 2000N Closing Force, Massive Hold Arm With Safety Lock, Zinc Plated - Kukamet
Take advantage of a galvanised, compact vertical clamp that combines robust holding force and a secure safety lock for reliable fixturing. The unit’s 167 mm arm and rated 2,500 N holding force support stable clamping in demanding workshop setups — order directly via Metav Werkzeuge or ask their consultants for application advice. Vertical clamp 212 by Kukamet — galvanised vertical clamping device, 2,500 N holding force The Vertical clamp 212 is a galvanised vertical clamping device for workshop and fixture applications that provides a heavy-duty holding arm and an integrated safety lock for secure part retention Galvanised construction for corrosion resistance Heavy-duty holding arm with safety lock Up to 2,500 N maximum holding force Compact 167 mm arm for precise positioning Durable construction that prolongs service life The clamp’s galvanised finish delivers reliable corrosion protection, reducing maintenance intervals in humid or light-industrial environments. Built with a massive holding arm, the device maintains consistent clamping pressure during repeated cycles, which lowers the risk of setup slippage and production stoppages. The solid construction also means fewer replacements over time, supporting continuous operation and lower lifetime costs for workshop fixtures. Predictable clamping performance for repeatable results Engineered for stability, the unit provides a maximum holding force of 2,500 N and a pressing capacity of 2,000 N, enabling secure fixation of small to medium workpieces during machining or assembly. The integrated safety lock prevents unintended release under vibration or impact, ensuring that clamping force remains constant once engaged. Such predictable force characteristics simplify process planning and improve part quality by reducing movement during operations. Space-saving design for accurate setups With a 167 mm arm and a compact footprint, this vertical clamp fits into tight fixture layouts where access and repeatability matter. The vertical-foot mounting arrangement allows straightforward installation on plates and tooling blocks, facilitating fast integration into modular fixtures. The relatively low weight (0.37 kg) contributes to nimble handling when configuring jigs and reduces added mass on movable assemblies. Suitable for workshop fixtures and production aids The clamp is designed as a practical fixture component for assembly benches, drill jigs and light machining setups. The combination of galvanised material and a heavy-duty arm with a locking mechanism makes it appropriate for repetitive tasks where consistent part positioning is required. The device supports efficient workflows by offering a straightforward mechanical solution for secure part retention without complex adjustments. For reliable clamping solutions from Kukamet, request the Vertical clamp 212 via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for application-specific recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 212-3-D-L-C3 GTIN: 8680731501643 Manufacturer: Kukamet EClass: 21041717 ETIM: EC011973 Facts Arm length: 167 mm Maximum holding force: 2,500 N Maximum pressing force: 2,000 N Weight: 0.37 kg Special features Material: Galvanised Mounting: vertical foot Massive holding arm and safety lock Compact vertical clamp for workshop fixtures FAQ What maximum holding force does the clamp provide? The Kukamet Vertical clamp 212 delivers a maximum holding force of 2,500 N (SKU 212-3-D-L-C3), suitable for secure retention of small to medium workpieces. Is the clamp protected against corrosion? Yes, the fixture is galvanised to provide enhanced corrosion resistance for typical workshop environments. How is the clamp mounted to a fixture plate? The unit is designed for vertical foot mounting, allowing direct attachment to plates or tooling blocks for compact fixture layouts. What arm length is available for positioning? The clamp features a 167 mm arm that enables precise positioning within confined assemblies and jigs. Can the clamp be used in repetitive production processes? The heavy-duty holding arm combined with a safety lock makes the clamp appropriate for repetitive tasks where consistent clamping force and part stability are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
167mm Vertical Clamp 2000N Closing Force, Massive Hold Arm, Blackened Finish - Kukamet
Benefit from a massive 167 mm holding arm, up to 2,500 N holding force and a robust blackened finish for dependable vertical clamping in production environments. Order the Vertical clamp 212 directly via Metav Werkzeuge or consult their advisers for application-specific configuration. Vertical clamp 212 — Vertical lever clamp with 167 mm arm and 2,500 N holding force (Kukamet) The Vertical clamp 212 is a compact vertical lever clamp designed for secure workpiece retention in fixtures and jigs across workshop and light industrial settings. Massive 167 mm holding arm Up to 2,500 N holding force Vertical foot mounting Blackened burnished finish Secure clamping for repeatable production The clamp delivers high holding performance with a rated 2,500 N holding force and a maximum pressing force of 2,000 N, making it suitable for repetitive securing tasks in production and assembly. The long 167 mm arm increases reach without compromising stability, enabling secure clamping of irregular or taller workpieces. The specified forces are measured under standard conditions; the result is a measurable improvement in fixture reliability and reduced rework rates when integrated into assembly jigs. Compact, durable design that saves setup time Constructed with a massive holding arm and a blackened burnished finish, the device combines low weight with durability—the unit weighs 0.447 kg, allowing straightforward retrofitting to existing fixtures. The vertical foot mounting provides a low-profile attachment point that minimises interference with tool paths and neighbouring clamps. Surface treatment reduces corrosion and wear, extending service intervals and lowering lifetime operating costs compared with untreated equivalents. Straightforward integration in workshops and fixtures The lever mechanism and compact footprint make the clamp easy to incorporate into dedicated jigs or modular tooling systems. The vertical orientation lends itself to applications where clamping force must be applied from above, for example in positioning stations or test fixtures. Specifying this lever clamp in a fixture layout reduces cycle time by enabling faster part placement and consistent repeatable clamping forces, supporting higher throughput without additional operator training. Contact Metav Werkzeuge today to specify the Vertical clamp 212 for the intended application and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery Technical data SKU: B212-3-D-C3 GTIN: 8682843522318 Manufacturer: Kukamet Facts Arm length: 167 mm Holding force max: 2,500 N Pressing force max: 2,000 N Weight: 0.447 kg eClass: 21041717 ETIM: EC011973 Special features Vertical foot mounting Massive holding arm Blackened burnished finish Model designation: 212 Trigger type: lever clamp FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 2,500 N for the Vertical clamp 212 (Kukamet lever clamp, SKU B212-3-D-C3). How is the clamp mounted to a fixture? Mounting is via a vertical foot, designed for secure attachment to fixture plates and jig bases. Is the surface treated to resist corrosion? Yes, the device features a blackened burnished finish that improves wear and corrosion resistance. Can this clamp be used for manual assembly and automated stations? The compact form factor and lever mechanism suit both manual workstations and integration into automated or semi-automated fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
167mm Vertical Clamp 2000N Closing Force, Massive Holding Arm, Blackened Finish - Kukamet
Take advantage of the combination of a compact 167 mm reach, robust holding performance and a space-saving horizontal foot for reliable clamping; order directly via Metav Werkzeuge or consult the team for configuration advice. Vertikalspanner 211 Vertical clamp with 167 mm arm and horizontal foot (Kukamet) The Vertikalspanner 211 is a vertical clamp designed for secure, repeatable fixing in limited spaces, suited to workshop and light industrial fixturing. Vertical clamp 167 mm arm Horizontal foot for stable mounting Massive holding arm for repeatable use Blackened finish and low weight 0.45 kg Reliable clamping for repeatable setups The unit is a compact vertical clamp engineered to hold components during machining, assembly or testing. With a 167 mm arm the device extends reach while keeping the footprint modest, enabling the fixture of taller or offset workpieces without compromising stability. The combination of measurable clamping performance and a compact form supports predictable setup times and consistent production flow. Strong holding power with precise control Designed for dependable retention, the clamp provides a maximum 2,000 N clamping force and a peak 2,500 N holding capacity, values that ensure secure fixation during dynamic operations. These figures describe the mechanical limits under standard conditions and help in selecting appropriate workpiece sizes and clamping positions. The clear numeric specification simplifies decision-making when planning fixturing strategies. Durable construction for everyday workshop use The component features a blackened finish applied to minimise surface glare and increase resistance to handling wear, while the massive holding arm provides rigidity where repeatability matters most. Despite its robust build, the device remains lightweight at 0.45 kg, making it straightforward to reposition in modular fixtures or to include in portable tooling sets without adding significant mass to the assembly. Fast integration into existing fixtures A horizontal foot mounting offers a straightforward mechanical interface for bench, plate or jig attachment, reducing setup complexity and downtime. The clamp’s compact profile and sturdy arm support shorter cycle times and fewer resets, which is beneficial for batch work and small-series production. When combined with systematic fixturing, the component contributes to measurable productivity improvements. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertikalspanner 211 into existing fixtures; Metav’s consultants can provide technical details and order support from Emmerich. Technical data SKU: B211-3-D-C3 GTIN: 8680731507713 eClass: 21041717 ETIM: EC011973 Facts Arm length: 167 mm Weight: 0.45 kg Max clamping force: 2,000 N Max holding force: 2,500 N Special features Mounting: horizontal foot Finish: blackened Massive holding arm Category: Spanner FAQ What reach does the clamp offer? The Vertikalspanner 211 has a 167 mm arm, providing extended reach for offset or taller workpieces while maintaining a compact mounting footprint. What clamping and holding forces are specified? Specified maximums are 2,000 N clamping force and 2,500 N holding force for the Vertikalspanner 211, values intended for planning safe and effective fixtures. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, which permits stable attachment to benches, plates or modular fixturing systems. Is the finish suitable for workshop environments? The blackened finish offers a hard-wearing surface that reduces glare and shows minimal handling wear, supporting routine workshop use. Which product identifier is used for ordering? Order reference is SKU B211-3-D-C3; the product is listed under the spanner category and carries GTIN 8680731507713. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
168.5mm Vertical Clamp With Angle Base, Massive Holding Arm, 4.5kN Thrust, 5kN Hold – Kukamet
Take advantage of the combination of robust clamping force, a massive holding arm and a compact, zinc-plated finish to secure fixtures reliably in production and workshop environments. Order the clamp directly via Metav Werkzeuge or consult their specialists for system integration and application advice. Kukamet 213 Vertical Clamp — Massive Holding Arm, Zinc-Plated The 213 Vertical Clamp is a compact vertical clamping device designed for sturdy fixture work and reliable part retention in workshop and production jigs. Massive holding arm for robust clamping Zinc-plated corrosion protection Up to 5,000 N holding force Angle-foot mounting for secure installation Built for dependable clamping performance The vertical clamping device delivers precise, repeatable retention through a combination of high holding force and a massive holding arm. With a rated holding force of 5,000 N and a maximum pressing force of 4,500 N, the unit is engineered to secure components during machining, assembly and testing operations. The zinc-plated finish reduces corrosion risk, extending service life in humid production environments. These technical attributes translate into fewer unclamping incidents, less rework and a more predictable production flow. Space-conscious design that fits fixtures without compromise A short 168.5 mm arm and a compact footprint make the clamp suitable for dense fixture layouts where accessibility and clearance are limited. The angle-foot mounting provides a stable base that simplifies attachment to plates or subplates and helps maintain alignment under load. At a weight of 1.734 kg, the device balances solidity with easy handling during fixture assembly, enabling fast setup changes and reduced downtime when jigs need modification. Durable finish and straightforward integration for industrial use Constructed with a zinc-plated body and a reinforced holding arm, the clamp resists wear from repeated cycles and harsh workshop conditions. The straightforward mechanical design allows integration into existing fixturing systems without complex adaptations; the device functions as a reliable vertical clamping element in modular tooling, inspection fixtures and manual assembly stations. The robust mechanical properties lower maintenance intervals and support consistent production quality over long runs. Contact Metav Werkzeuge today for advice on fixture design, compatibility with existing tooling or to request a tailored quotation for the Kukamet 213 vertical clamp — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number (SKU): 213-5-D-C2 GTIN: 8680731502121 Manufacturer: Kukamet Core specifications Arm length: 168.5 mm Weight: 1.734 kg Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Materials & features Zinc-plated material Angle-foot mounting Massive holding arm Category: Spanner ECLASS: 21041717 ETIM: EC011973 FAQ How much holding force does the clamp provide? The Kukamet 213 vertical clamp delivers a maximum holding force of 5,000 N and a pressing capability of 4,500 N, suitable for demanding fixture applications. Can the clamp be mounted on standard fixture plates? Yes, the clamp features angle-foot mounting that enables secure attachment to plates and subplates commonly used in modular tooling systems; the SKU is 213-5-D-C2. Is the surface finish suitable for humid workshop environments? The clamp is zinc-plated, offering corrosion resistance that helps maintain performance and reduces the need for frequent replacement in workshop conditions. What makes this clamp suitable for compact fixtures? A short arm length of 168.5 mm and a compact design allow placement in tight assemblies while the massive holding arm maintains clamping stability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
168mm Horizontal Clamp Heavy Holding Arm With Safety Lock, 90° Angle - Kukamet
Combine a massive holding arm, 2,500 N holding force and a secure safety lock for dependable clamping in repetitive production tasks; order the clamp via Metav Werkzeuge or consult the technical team for fitment and compatibility. Kukamet horizontal toggle clamp 112 — 168 mm arm, 2,500 N holding force A robust Kukamet horizontal toggle clamp 112 designed for secure, repeatable clamping in assembly, welding and jig fixtures with vertical-foot mounting for stable attachment. Massive holding arm for high durability Built-in safety lock for secure clamping 2,500 N maximum holding force Vertical-foot mounting for stable installation Robust clamping performance for daily production The clamp is engineered to deliver reliable retention under repeated cycles. The combination of a massive holding arm and a 2,500 N maximum holding force provides a high safety margin for many fixture tasks, while the 2,300 N pressing force ensures secure contact pressure for workpieces. In practical terms, this reduces part movement during machining or welding and lowers rework rates. The robust design translates into longer service life and predictable performance in light industrial environments. Quick action and stable installation for accurate tooling Operation follows the well-established toggle-clamp principle: a short lever travel produces a strong clamping action, enabling fast handling in production runs. The 168 mm arm and 90° angle geometry give a consistent clamping path, and the vertical-foot mounting allows the unit to be fixed to plates or fixture bases with minimal play. The result is repeatable positioning and faster cycle times for assembly or jig operations, with straightforward mechanical behaviour that is easy to integrate into existing tooling. Practical finish, maintenance and application scope Surface protection is provided by a blackened (blued) finish, improving wear resistance and offering basic corrosion protection in workshop conditions. At approximately 0.3 kg, the unit is lightweight to handle when fitting but substantial in feel thanks to its construction. This toggle clamp suits fixture and jig clamping in assembly, welding, woodworking and light machining. Basic upkeep consists of occasional lubrication of the pivot points and inspection of the safety lock for correct engagement, ensuring long-term reliability. For robust, repeatable clamping choose the Kukamet 112 horizontal toggle clamp — contact Metav Werkzeuge for technical advice and secure procurement directly from Emmerich. Technical data Article number: B112-3-D-L-C3 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 168 mm Maximum holding force: 2,500 N Maximum pressing force: 2,300 N Angle: 90° Weight: 0.3 kg Special features Vertical-foot mounting Massive holding arm Safety lock Blackened (blued) finish Suitable for fixture and jig clamping FAQ What holding force does the clamp provide? The Kukamet horizontal toggle clamp 112 delivers a maximum holding force of 2,500 N, specified for static retention in fixture applications (SKU B112-3-D-L-C3). How is the clamp mounted to a fixture base? Mounting is achieved via the vertical-foot mounting arrangement; the clamp is designed to be fastened securely to plates or fixture bases for minimal play and stable operation. Which surfaces and materials is the clamp suited for? The clamp is intended for general fixture use in assembly, welding and light machining; the blackened (blued) finish offers basic corrosion resistance for workshop environments. What does the safety lock do? The integrated safety lock secures the clamping arm in the closed position, preventing accidental release and improving safety during repeated handling. Is maintenance complicated for this toggle clamp? Maintenance is straightforward: periodic lubrication of pivot points and visual checks of the safety lock and fastening integrity are normally sufficient to maintain performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm 4.5kN Pneumatic Push‑Rod Clamp Horizontal Base, Zinc‑Plated 6.65kN Holding Force - Kukamet
Combining a 4,500 N pneumatic clamping stroke with a 6,650 N holding capacity and a galvanised housing, the clamp delivers dependable retention for automated and manual fixtures; the compact 16 mm piston keeps the unit space-efficient while maintaining force. Order the Pneumatic push rod clamp directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Pneumatic push rod clamp 661 — 4,500 N, galvanised (Kukamet) The Pneumatic push rod clamp 661 is a compact pneumatic clamp designed for horizontal mounting in production and assembly fixtures, offering robust clamping and secure holding for repeatable processes. Pneumatic actuation for fast clamping Max clamping force 4,500 N Holding force up to 6,650 N Galvanised finish for corrosion resistance Consistent clamping force for repeatable processes The pneumatic actuator provides controlled clamping with a reliable force of 4,500 N, supported by a holding capacity of 6,650 N that secures workpieces during machining or assembly. The specified 16 mm piston diameter balances travel and force transmission, enabling short stroke cycles and rapid cycle times in automated setups. By converting compressed air into linear motion, the device ensures stable, measurable results that suit both batch production and precision fixtures. Space-saving design that fits tight fixtures A compact footprint and a horizontal mounting foot make the unit straightforward to integrate into jigs and fixture plates where space is limited. The relatively low mass of 1.816 kg reduces added inertia on moving assemblies and simplifies handling during fixture build-up. The horizontal foot allows mounting close to the workpiece, reducing lever arm effects and improving clamping consistency in confined toolrooms and production cells. Durable finish and straightforward maintenance The body is galvanised, offering corrosion resistance for industrial environments and extending service life where metalworking coolants or ambient humidity are present. The construction reduces routine maintenance needs and supports long service intervals in demanding applications. Documentation such as the linked catalogue page provides installation guidance and dimensional references to speed up retrofitting and spare-part selection for system planners. Integration and ordering details for production planning For system integration the unit is classified and standardised for production procurement; reference the SKU 661-4-Q16 when specifying fixtures to ensure the correct variant is supplied. The combination of consistent pneumatic actuation, measurable force figures and a compact design supports predictable cycle times and quality control routines in both manual workshops and automated production lines. Contact Metav Werkzeuge today for advice on fixture design or to secure a Kukamet Pneumatic push rod clamp 661 for your production setup — our specialists are available to discuss suitability and application details Technical Data SKU: 661-4-Q16 GTIN: 8680731503135 Manufacturer: Kukamet eClass: 21041716 ETIM: EC011973 Catalogue: 661-662-katalogseite.pdf Facts Max clamping force: 4,500 N Max holding force: 6,650 N Piston diameter: 16 mm Weight: 1.816 kg Special features Material: galvanised Mounting: horizontal foot Category: clamp (Spanner) Actuation: pneumatic FAQ What clamping and holding forces does this clamp provide? The Pneumatic push rod clamp 661 from Kukamet provides a clamping force of 4,500 N and a holding capacity of 6,650 N (SKU 661-4-Q16), suitable for securing parts during machining and assembly. Is the clamp suitable for automated production cells? Yes. The pneumatic actuation and compact design of the Kukamet pneumatic push rod clamp 661 make it suitable for integration in automated fixtures and handling systems. How is the clamp mounted in the fixture? The unit is designed for horizontal mounting with a dedicated horizontal foot, allowing close placement to the workpiece and straightforward fixture integration. What material finish does the unit have for workshop environments? The housing is galvanised, providing corrosion resistance and improved durability in typical workshop conditions. Where can the technical documentation be found? Technical and catalogue information is provided in the listed catalogue page (661-662-katalogseite.pdf) and can be referenced alongside SKU 661-4-Q16 for procurement. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Pneumatic Clamp Horizontal Foot, 600N Push/1000N Hold, 95° Arm With Massive Support, Zinc-Plated - Kukamet
Benefit from consistent pneumatic clamping with a 600 N piston drive, a 1,000 N maximum holding force and a robust zinc-plated holding arm that resists corrosion and reduces maintenance. Order the 611 model directly via Metav Werkzeuge or ask our consultants if needed. 611 Pneumatic clamp by Kukamet — 600 N piston drive, 1,000 N holding force The 611 Pneumatic clamp is a compact pneumatic workholding solution for production jigs and fixtures, designed for horizontal-foot mounting and reliable repeatability in metalworking and assembly tasks. Massive holding arm for secure clamping Horizontal-foot mounting for stable installation Zinc-plated corrosion-resistant finish 1,000 N maximum holding force Consistent clamping performance for production use The pneumatic actuation delivers regular, repeatable clamping force, eliminating variability associated with manual toggles. With a 600 N piston force driven by a 16 mm piston, the unit provides stable engagement while the 1,000 N holding force secures workpieces through machining and finishing operations. Regular clamping pressure improves process yields and reduces scrap rates, making this clamp suitable for small series and automated fixtures. Robust construction that lowers maintenance needs Constructed with a zinc-plated finish and a massive holding arm, the design reduces wear and resists corrosion in workshop environments. The heavy-duty arm and plated surfaces extend service intervals and maintain clamping accuracy under frequent cycles. This translates into fewer interventions and less downtime for maintenance, supporting uninterrupted production and a steady quality level. Flexible mounting and easy integration into jigs The horizontal-foot fastening and a 44 mm arm length support a wide range of fixture layouts; an operating angle of 95° facilitates clearance during loading and unloading. The compact format and standardised fixing pattern simplify integration into existing tooling, while lever-type actuation logic aligns with common clamping schemes. The result is faster setup times and more consistent part presentation for downstream processes. Practical advantages for workshop planners The simple pneumatic interface reduces operator effort and allows centralised control of multiple clamps, which streamlines cycle times in repetitive operations. The compact cylinder and robust mechanics are optimised for frequent actuation, offering a balance between force capacity and footprint. Where space and repeatability matter, this clamp supports predictable operation and measurable productivity gains. For robust and repeatable pneumatic clamping specify the Kukamet 611 and contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 611-1-Q16-D-C1 Model: 611 Manufacturer: Kukamet Facts Maximum holding force: 1,000 N Piston force (max): 600 N Piston diameter: 16 mm Arm length: 44 mm Operating angle: 95° Special features Horizontal-foot mounting Zinc-plated finish Massive holding arm Suitable for lever-clamping applications FAQ How much holding force does this clamp provide? The clamp offers a maximum holding force of 1,000 N, providing secure fixation during machining and assembly operations. What is the piston specification for the pneumatic drive? The pneumatic drive uses a 16 mm piston delivering up to 600 N piston force for consistent actuation. Can the clamp be mounted directly to a fixture plate? Yes, the horizontal-foot mounting allows stable attachment to fixture plates and jigs for repeatable positioning. Is the surface treated to resist corrosion in workshop environments? The clamp features a zinc-plated finish that enhances corrosion resistance and extends component life. Which applications suit this clamp best? The design is intended for production jigs, assembly fixtures and repetitive machining tasks where reliable pneumatic clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Pneumatic Push Rod Clamp 4.5 kN Push, 6.65 kN Hold, Zinc Plated - Kukamet
Take advantage of the combination of reliable pneumatic performance, robust galvanised construction and compact installation for a consistent clamping process. Order the Pneumatic push-rod clamp 621 directly via Metav Werkzeuge or ask our consultants if additional technical clarification is required. Pneumatic push-rod clamp 621 by Kukamet — 4.5 kN thrust, galvanised The Pneumatic push-rod clamp 621 is a compact industrial clamp designed for secure, repeatable clamping in production and jigs, ideal where fast pneumatic actuation and stable mounting are required. 4.5 kN pneumatic thrust 6.65 kN high holding force Galvanised steel construction Horizontal foot mounting for stability Robust performance for repeated cycles The clamp delivers a 4.5 kN actuation force and a 6.65 kN holding force, providing reliable mechanical restraint for typical machining and assembly operations. The pneumatic drive produces rapid, consistent motion so that cycle times are shortened without sacrificing clamping reliability. The device is built for repetitive use: the combination of pneumatic actuation and a piston diameter of 16 mm ensures a stable force profile that reduces rework and supports higher throughput on production lines. Compact design that eases integration A compact footprint and horizontal foot mounting allow the clamp to be positioned close to workpieces and incorporated into tooling fixtures with minimal redesign. The galvanised finish and restrained mass make the unit suitable for bench-mounted fixtures and short-travel applications where space is at a premium. Installation is straightforward because the mounting arrangement keeps the clamp aligned with the work surface, simplifying fixture layout and permitting quick mechanical integration into existing jigs. Durable finish for harsh workshop environments Constructed from galvanised steel, the clamp resists corrosion and abrasion commonly found in industrial workshops. The protective finish extends service intervals and reduces the frequency of replacements in environments with coolant mist or moderate humidity. This durability supports a lower total cost of ownership by maintaining clamping precision and reducing downtime for maintenance or part swaps. Clear technical advantages for production planners The unit’s balanced specification — compact mass, measured actuation force and robust holding capacity — makes it suitable for automated cells and manual jigs alike. The combination of pneumatic actuation and the specified force ratings allows planners to match the device to common fixturing tasks without overspecifying or compromising safety margins. The clamp is a pragmatic choice where reliable, repeatable clamping is required and where supply chain reliability and product consistency are valued. For procurement or application advice on Kukamet’s 621 pneumatic push-rod clamp, contact Metav Werkzeuge for a tailored recommendation and full product support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 621-4-Q16 Model: 621 Manufacturer: Kukamet GTIN: 8680731502961 Category: Spanner Facts Weight: 2.23 kg Max thrust: 4,500 N Max holding force: 6,650 N Piston diameter: 16 mm eClass: 21041716 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal foot SKU: 621-4-Q16 Asset: 621-main.jpg FAQ What maximum thrust does the clamp provide? The clamp provides a maximum pneumatic thrust of 4,500 N, as specified for the Pneumatic push-rod clamp 621 from Kukamet. Is the clamping unit suitable for workshop environments with humidity? Yes, the galvanised finish of the Kukamet 621 offers corrosion resistance suited to typical workshop atmospheres and coolant exposure. How is the clamp mounted to fixtures? Mounting is by a horizontal foot arrangement, enabling secure attachment to jigs and workbenches while maintaining alignment with the clamped component. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Pneumatic Push‑Rod Clamp 4.5kN Push Force, Zinc‑Plated Cast Body - Kukamet
Take advantage of the combination of 4.5 kN push force, a zinc‑plated cast body and compact horizontal mounting for robust, repeatable clamping in production environments. Order the Pneumatic Push‑Rod Clamp 641 directly via Metav Werkzeuge or consult the team for configuration advice. Pneumatic Push‑Rod Clamp 641 — horizontal foot mounting, 4.5 kN push force (Kukamet) The Pneumatic Push‑Rod Clamp 641 is a compact industrial clamp engineered for horizontal mounting to provide consistent, high‑force workholding in jigs, fixtures and assembly lines. Compact pneumatic clamp with horizontal foot 4.5 kN push force for secure workholding Zinc‑plated body with cast construction High holding force up to 8.1 kN Consistent clamping for reliable production flow This clamp delivers a 4.5 kN piston push force with a maximum holding force of 8.1 kN, ensuring steady contact and minimal component movement during machining or assembly. The pneumatic actuation provides rapid, repeatable cycles that reduce setup time and support higher throughput. The zinc‑plated cast body combines corrosion resistance with structural rigidity, translating into consistent clamping accuracy and fewer rejects over long production runs. Simple integration and durable operation With a 16 mm piston diameter, the device is designed for dependable pneumatic operation and straightforward integration into existing fixture systems. The horizontal foot mounting simplifies alignment on flat surfaces or baseplates and is suitable for automated tooling stations. The corrosion‑resistant finish and cast construction reduce routine servicing; scheduled inspections and standard pneumatic maintenance keep the unit operating reliably with minimal downtime. Practical applications and compatibility Designed for general industrial workholding, the clamp is well suited to small to medium fixtures in workshops and production cells where secure, repeatable clamping is required. Typical uses include assembly jigs, light machining fixtures and transfer systems where compact pneumatic clamps are preferred over mechanical alternatives. The combination of robust holding force and compact design helps maintain precision in repetitive processes, supporting quality assurance objectives. For robust, high‑force pneumatic clamping choose Kukamet’s 641 — contact Metav Werkzeuge for application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 641-4-Q16 GTIN: 8680731503050 SKU: 641-4-Q16 Facts Push force: 4,500 N Holding force: 8,100 N Piston diameter: 16 mm Weight: 2.56 kg Special features Material: zinc‑plated with cast body Mounting: horizontal foot eClass: 21041716 ETIM: EC011973 FAQ What clamping force does the device provide? The Pneumatic Push‑Rod Clamp 641 delivers a piston push force of 4,500 N and a maximum holding force of 8,100 N for secure workholding. Is the clamp suitable for automated fixtures? Yes, the clamp’s compact pneumatic design and horizontal foot mounting make it suitable for integration into automated jigs and transfer systems. What material and surface protection does the clamp have? The unit has a zinc‑plated cast body, offering corrosion resistance and structural stability for industrial use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Pneumatic Push‑Rod Clamp 4.5kN Push Force, Zinc‑Plated Cast Body, 8.1kN Holding Force - Kukamet
Take advantage of the combination of 4,500 N pneumatic thrust, a zinc-plated cast body and a compact horizontal-foot mounting to secure workpieces reliably and speed up production cycles. Order the clamp directly via Metav Werkzeuge or contact the consultants for tailored technical advice. Kukamet Pneumatic Push-Rod Clamp 671 — 4,500 N thrust, horizontal foot The 671 is a pneumatic push-rod clamp for industrial fixtures and repetitive clamping tasks, designed for secure holding in production and assembly applications. 4,500 N pneumatic thrust force 8,100 N maximum holding force Zinc-plated body with cast construction Ø16 mm piston for compact actuation Horizontal-foot mounting for stable fixing Reliable clamping performance for repetitive production The pneumatic design delivers a consistent 4,500 N thrust combined with an 8,100 N holding force, ensuring repeatable engagement and secure fixture retention across cycles. This level of performance reduces rework and minimises downtime by providing dependable clamping force for common jigs and fixtures. The Ø16 mm piston provides compact actuation that is suitable where space is limited, while pneumatic control enables quick cycle times and integration into existing compressed-air systems. The described force parameters support process stability in medium-duty production and automated handling stations. Durable construction that withstands workshop conditions Manufactured with a zinc-plated, corrosion-resistant finish and a robust cast body, the clamp is engineered for longevity in demanding environments. The combination of protective plating and a solid casting reduces wear from repeated use and exposure to workshop conditions, extending service intervals and preserving clamping accuracy. The horizontal foot mounting provides a low-profile, rigid attachment point that keeps fixtures stable under load, and the unit’s weight of 2.13 kg contributes to secure anchoring without unnecessary bulk. Practical installation and straightforward upkeep Designed for simple integration, the unit supports straightforward mounting and pneumatic connection with minimal auxiliary components. The push-rod mechanism operates via pneumatic actuation, which simplifies controls and reduces mechanical complexity compared with electric solutions. Routine maintenance is limited to standard lubrication and inspection of seals; the construction minimises service frequency, helping to keep maintenance costs low. Where automation or retrofitting is required, the compact form factor and standardised interfaces allow efficient incorporation into existing clamping systems while preserving reliable operation. For tailored advice on integrating the Kukamet 671 clamp into a production line or for a fast, reliable supply from Metav Werkzeuge, contact our technical consultants at Metav Werkzeuge in Emmerich Technical data SKU: 671-4-Q16 GTIN: 8680731503180 Brand: Kukamet Model: 671 Facts Max thrust force: 4,500 N Max holding force: 8,100 N Piston diameter: 16 mm Weight: 2.13 kg ECLASS: 21041716 ETIM: EC011973 Special features Material: zinc-plated with cast body Mounting: horizontal foot Category: Spanner Actuation: pneumatic FAQ What clamping and holding forces does the clamp provide? The clamp delivers a pneumatic thrust of 4,500 N and a maximum holding force of 8,100 N, offering secure fixation for medium-duty production tasks with the Kukamet 671 push-rod clamp. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation and compact piston diameter make the unit suitable for integration into automated fixtures and handling systems, facilitating rapid cycle times and consistent clamping. What mounting options are available for this clamp? The unit features a horizontal-foot mounting that provides a stable, low-profile attachment to plates and fixtures for secure installation in jigs and assemblies. What materials and surface protection are used? The clamp body is cast and zinc-plated, which offers enhanced corrosion resistance and durability for workshop and industrial environments. How often is maintenance required? Maintenance is limited to routine inspection of seals and periodic lubrication; the robust construction reduces service frequency and keeps operating costs low. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Precision Pushrod Clamp M10x70 Horizontal Base 4,500N Hold 8,100N - Kukamet
Take advantage of strong clamping performance and a corrosion‑resistant cast construction to keep fixtures secure and downtime low; the combination of a galvanised cast body, 4,500 N clamping force and a horizontal foot mount ensures reliable results in jigs and assembly stations. Order the Kukamet 531 push‑rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 531 Push‑rod Clamp — Horizontal foot, M10×70 pressure spindle The 531 is a robust push‑rod clamp engineered for secure workpiece clamping in workshop fixtures and production jigs, offering a galvanised cast body and a horizontal foot mounting for stable integration. Galvanised cast body for corrosion resistance Max clamping force 4,500 N, holding force 8,100 N Horizontal foot mounting for stable fixture Pressure spindle M10×70, piston Ø16 mm Consistent clamping performance that stabilises production Built for repeatable operation, this push‑rod clamp provides a clearly defined clamping force and superior holding force, which together reduce slippage and rework. The specified 4,500 N clamping force gives a measurable basis for fixture design and cycle planning, while the 8,100 N holding force secures the component when external loads occur. The piston diameter of 16 mm supports predictable actuation dynamics; explaining these values in design terms helps technicians select the right clamp for target process forces and safety margins. Durable construction for long service life and low maintenance A galvanised finish combined with a sturdy cast body delivers corrosion resistance and mechanical stability in workshop environments. The surface treatment slows environmental wear, whereas the cast main body provides the mass and rigidity required for vibration damping in machining or assembly operations. This construction reduces the frequency of maintenance interventions and helps preserve alignment in long‑running fixtures, translating technical robustness into lower total cost of ownership for production equipment. Easy mounting and precise adjustment for fixture integration The horizontal foot mounting simplifies attachment to base plates and modular fixturing systems, allowing clamps to be positioned close to the workpiece without obstructing access. The integrated pressure spindle (threaded M10×70) enables fine preloading and rapid adjustment during set‑up, so fixtures can be dialled in quickly. These features shorten set‑up time and support faster changeovers, which is particularly valuable in small‑batch production and mixed‑model lines where flexibility and uptime are priorities. Practical reliability and design clarity for workshop use Designed with clear mechanical parameters and straightforward mounting, the clamp supports predictable fixture behaviour and safer handling. The combination of defined actuation geometry and a robust body means fewer surprises on the shop floor and greater confidence during handling and inspection. Where risk reduction and process stability matter, the measurable data and rugged design help justify the integration of this clamp into production tooling. Contact Metav Werkzeuge for specialist advice on fitting the Kukamet 531 push‑rod clamp into existing fixtures or for customised ordering and delivery options Technical data Article number: 531-4-Q16 GTIN: 8680731502824 ETIM: EC011973 eCl@ss: 21041716 Numeric specifications Clamping force max: 4,500 N Holding force max: 8,100 N Piston diameter: 16 mm Weight: 1.14 kg Pressure spindle: M10×70 Materials & features Galvanised finish with cast body Horizontal foot mounting Category: Push‑rod clamp (lever clamp) Manufacturer: Kukamet FAQ What maximum clamping force does this clamp deliver? The Kukamet 531 push‑rod clamp (SKU 531-4-Q16) provides a maximum clamping force of 4,500 N and a holding force of 8,100 N for secure fixturing. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the clamp has a horizontal foot mounting face for bolting directly to base plates or modular fixture components. Which spindle and adjustment are provided on the clamp? The clamp is fitted with a pressure spindle specified as M10×70 and a piston diameter of 16 mm for precise preload and straightforward adjustment. What materials and finish are used in the construction? The main body is cast and the component is galvanised to provide corrosion resistance and mechanical stability suitable for workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Push Rod Clamp 4.5kN Push Force, 8.1kN Holding Force, Zinc-Plated Cast Body M10x70 Spindle - Kukamet
Achieve consistent fixturing with a zinc‑plated cast body, a 4,500 N clamping force and an 8,100 N holding force for dependable production performance; order the clamp directly via Metav Werkzeuge or consult our specialists for application guidance. Push‑rod clamp 532 — Horizontal‑foot mount, 4,500 N clamping force (Kukamet) The Push‑rod clamp 532 is a compact horizontal‑foot clamping device designed for medium‑duty workshop and production fixturing, providing secure locating and repeatable holding for assembly and machining tasks. Zinc‑plated cast body for robustness 4,500 N maximum clamping force Horizontal foot for stable mounting M10x70 pressure spindle included Reliable clamping where it matters The clamp delivers a clear performance advantage through its 4,500 N maximum clamping force and an 8,100 N static holding force, ensuring workpieces remain stationary during machining or assembly. These measurable values make planning and fixture design straightforward: the specified forces correspond to defined safety margins, reducing the need for repeated re‑checks and minimising downtime. The device is suitable for repetitive operations where consistent clamp load is essential, and the compact construction contributes to efficient use of bench and fixture space. Robust construction for long service life Constructed with a zinc‑plated cast body, the unit combines corrosion resistance with mechanical strength; the surface treatment extends operational life in standard workshop environments. The 16 mm piston diameter provides predictable contact pressure progression, while the overall mass of 1.03 kg keeps the component easy to integrate into modular fixtures without adding excessive weight. This balance of durability and low mass reduces fixture inertia, helping to maintain machine dynamics and cycle reliability. Practical mounting and adjustment Equipped with a horizontal foot mounting arrangement and an M10x70 pressure spindle, the clamp allows secure attachment to flat fixture plates and tooling rails. The horizontal foot design aids alignment in confined setups and supports low‑profile installations. The standard M10x70 spindle permits straightforward spindle replacement or length adjustment to match workpiece contours, enabling precise positioning without specialised tooling. Application focus and workmanship benefits Engineered for medium‑duty clamping tasks, the unit supports a range of workshop applications including jigs, assembly fixtures and light machining operations. The lever‑style clamping concept—derived from classic toggle and push‑rod designs—translates to fast actuation and simple integration into manual and semi‑automatic processes. Specified numeric data facilitates planning and reduces uncertainty during fixture design, delivering an economic solution that preserves machining accuracy and operator confidence. Contact Metav Werkzeuge for tailored fixture advice and to secure the Kukamet push‑rod clamp 532 for reliable, repeatable clamping in your workshop. Technical data SKU: 532-4-Q16 GTIN: 8680731504460 eClass: 21041716 ETIM: EC011973 Facts Weight: 1.03 kg Maximum clamping force: 4,500 N Maximum holding force: 8,100 N Piston diameter: 16 mm Pressure spindle: M10x70 Special features Material: zinc‑plated with cast body Mounting: horizontal foot Typical design: lever‑style / push‑rod clamping FAQ What materials is the clamp suitable for? The clamp is designed for general workshop materials; the Push‑rod clamp 532 is primarily intended for metal and mixed‑material fixturing where medium‑duty clamping is required. Can the pressure spindle be replaced or adjusted? Yes. The M10x70 pressure spindle on the 532 allows for replacement or length adjustment to suit different workpiece heights. How does the holding force differ from clamping force? The 4,500 N value denotes the active clamping force during actuation; the 8,100 N figure refers to static holding capacity when the clamp is engaged and secured. Is the clamp suitable for automated or manual fixtures? The compact design and lever‑style actuation make the unit adaptable to both manual and semi‑automated fixtures; the 532 integrates well into modular clamping systems. What are the mounting requirements for stable operation? A flat fixture plate or tooling rail is required for the horizontal foot mounting; secure fastening ensures the specified forces are transmitted reliably. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Push Rod Clamp Horizontal Base 4.5kN Push Force, Zinc Coated Cast Body - Kukamet
Take advantage of the combination of robust construction, measurable clamping performance and compact installation to secure reliable workholding on the shop floor. Order the clamp directly via Metav Werkzeuge or consult the specialists for application advice. 535 push‑rod clamp (SKU 535-4-Q16-R) — horizontal base, 4.5 kN clamping force (Kukamet) The 535 push‑rod clamp is a horizontal‑base workholding element designed for light to medium industrial clamping tasks, offering repeatable force and compact integration for fixtures and jigs. Horizontal base for stable mounting 4.5 kN clamping force for secure hold Galvanised cast body resists corrosion M10x70 pressure spindle for fine adjustment Consistent clamping for repeatable production A predictable clamping result is essential in series work. The clamp delivers a clamping force of 4.5 kN and a holding force of 4.7 kN, figures that translate directly into repeatable part fixation and reduced rework. These measurable values support process control and enable planning of fixture stresses. The internal piston with Ø 16 mm provides the mechanical basis for stable actuation, while the specified forces make it straightforward to calculate safety margins for a given setup. Durable construction built for shop‑floor conditions Long service life on the shop floor is achieved through the galvanised finish and a cast body that absorb mechanical wear and resist typical workshop corrosion. The material choice reduces maintenance intervals and keeps clamping surfaces stable under load, which benefits uptime and total cost of ownership. Mass and balance are optimised for handling—at 1.03 kg the unit is light enough for fixture assembly but substantial enough to remain secure during operation. Compact footprint and simple integration into fixtures A horizontal base allows direct mounting to plates or tooling blocks without additional adaptors, saving space inside jigs and reducing assembly time. The clamp’s compact dimensions and standard thread interfaces mean it can be positioned close to the workpiece for short lever arms and minimal deflection. The M10x70 pressure spindle permits accurate contact positioning and compensates for small height variations in workpieces, simplifying alignment during set up. Fast adjustment and reliable operation for daily use Adjustment is achieved via the pressure spindle, enabling controlled contact pressure and quick re‑setting between jobs. The mechanical design supports frequent actuation while keeping behaviour consistent over cycles; this reliability shortens changeover times and supports higher throughput. The clamp’s specifications are suitable for a broad range of fixtures, from single‑station jigs to modular fixturing systems, where predictable clamping behaviour improves overall process stability. For robust, shop‑ready clamping from Kukamet, contact Metav Werkzeuge for supply and application guidance: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 535-4-Q16-R GTIN: 8680731504217 ECLASS: 21041716 ETIM: EC011973 Facts Clamping force (max): 4500 N Holding force (max): 4700 N Piston diameter: 16 mm Pressure spindle: M10x70 Weight: 1.03 kg Special features Mounting: horizontal base Material: galvanised with cast body Brand: Kukamet FAQ What applications suit this clamp best? The 535 push‑rod clamp is suitable for light to medium industrial fixtures where repeatable fixation is required; its 4.5 kN clamping capacity matches many general machining and assembly tasks. How is the clamp adjusted to different part heights? Adjustment is made via the M10x70 pressure spindle, which allows fine positioning of the contact point and compensation for height differences during setup. Can the clamp withstand shop‑floor conditions? Yes. The galvanised cast body provides resistance to corrosion and wear, making the clamp appropriate for regular use in workshop environments. Is the clamping force measured or calculated? The stated values (4500 N clamping, 4700 N holding) are the manufacturer’s technical figures for the unit and can be used for fixture design and safety margin calculations. Does the clamp require specific mounting hardware? The clamp is designed for horizontal‑base mounting to standard tooling plates; the required fasteners depend on the fixture design and are not included. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Push Rod Clamp Horizontal Base 4.5kN Thrust, 6.65kN Hold, Zinc-Plated - Kukamet
Take advantage of the combination of high clamping performance, galvanised corrosion resistance and compact design for reliable fixture integration — the 521 Push‑rod clamp delivers secure workholding with a small installation footprint. Order the push‑rod clamp directly via Metav Werkzeuge or ask our consultants if additional technical details are required. 521 Push‑rod clamp by Kukamet — 4.5 kN pressing force, galvanised 521 Push‑rod clamp for horizontal mounting, engineered to provide consistent clamping and high holding capacity in jigs and fixtures 4.5 kN pressing force capacity 6.65 kN maximum holding force Galvanised for corrosion resistance Horizontal-foot mounting for simple integration Consistent force for reliable production The 521 Push‑rod clamp offers a defined 4,500 N pressing force and a 6,650 N holding force, ensuring repeatable clamping across cycles. Defined force values translate into predictable part retention, which reduces rework and minimises downtime in repetitive production tasks. The difference between pressing and holding forces is clarified: pressing force denotes the active application when the actuator is operated, while holding force indicates the clamp's passive resistance once engaged — both figures inform fixture design and safety margins. Compact mounting that speeds assembly With a horizontal foot mounting and an M10x70 actuating spindle, this clamp integrates cleanly into bespoke jigs and modular fixture plates. The unit's 0.81 kg mass keeps added inertia low, simplifying handling during assembly and reducing load on fixture supports. Where space is limited, the compact footprint allows closer packing of clamps without compromising access for loading and unloading, supporting efficient flow in manual and semi‑automated production cells. Robust finish for workshop longevity Constructed from galvanised steel, the clamp resists corrosion in typical workshop environments and requires minimal surface care. The protective coating prolongs service life in stamping, assembly and general clamping applications, which reduces total cost of ownership through lower replacement frequency. Simple mechanical design and standard spindle sizing mean maintenance is straightforward; worn spindles and fasteners can be serviced with common workshop tools, keeping uptime high. For reliable fixture clamping with proven holding figures, request further specification or procurement support from Metav Werkzeuge — Metav's advisers can confirm suitability and integration options for the Kukamet 521 Push‑rod clamp, SKU 521-4-Q16 Technical data SKU: 521-4-Q16 GTIN: 8680731502770 EClass: 21041716 ETIM: EC011973 Facts Max pressing force: 4,500 N Max holding force: 6,650 N Piston diameter: 16 mm Weight: 0.81 kg Materials & features Material: Galvanised steel Mounting: Horizontal foot Actuating spindle: M10x70 FAQ What is the maximum pressing force of this clamp? The maximum pressing force is 4,500 N for the 521 Push‑rod clamp, which defines the active clamping capability when the spindle is actuated. What holding force can be expected after actuation? The 521 Push‑rod clamp provides a maximum holding force of 6,650 N, representing the passive resistance once clamped. How is the clamp mounted in a fixture? The clamp is designed for horizontal‑foot mounting, allowing secure attachment to fixture bases and plates. What material and finish does the clamp have? The 521 Push‑rod clamp is made from galvanised steel, offering enhanced corrosion resistance for workshop use. Which actuating spindle does the clamp use? The clamp is fitted with an M10x70 actuating spindle, compatible with common threaded adjustment and locking hardware. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Push Rod Clamp Horizontal Foot 4,500N Push Force 8,100N Holding Force Galvanised Cast Body - Kukamet
Take advantage of the combination of robust clamping performance and low-maintenance construction to keep fixtures secure and production running smoothly — order the 536 push‑rod clamp directly via Metav Werkzeuge or contact the consultants for specification support. 536 Push‑rod clamp — horizontal foot, 4.5 kN clamping force (Kukamet) The 536 push‑rod clamp is a horizontal‑mounting workholding element designed for secure clamping in fixtures and jigs, delivering reliable force control for repetitive machining or assembly tasks. Compact horizontal foot design Clamping force 4.5 kN, holding force 8.1 kN Galvanised cast body for durability M10x70 pressure spindle specification Secure clamping where repeatability matters The push‑rod design provides a clear, linear force transfer: 4.5 kN clamping force with a holding force of 8.1 kN ensures stable retention of components during machining or assembly. A piston Ø 16 mm converts actuation into consistent pressure, reducing positional drift in repetitive operations. This type of clamp is suited for production where constant cycle times and reproducible clamping are required, enabling process planners to predict fixture behaviour and maintain throughput. Durable build reduces downtime and servicing Constructed with a galvanised, cast body, the unit resists corrosion in workshop environments while offering structural rigidity under lateral loads. The moderate mass of 1.03 kg balances robustness with ease of handling when fitting into modular fixtures. A corrosion‑resistant finish and a compact frame lower maintenance frequency, contributing to longer service intervals and fewer unplanned stoppages in the production chain. Simple integration into existing fixtures and jigs The horizontal foot mounting enables straightforward attachment to tooling plates and baseplates used in standard workholding setups. The M10x70 pressure spindle supplies a defined contact point, compatible with common threaded receiver holes. Installation requires common workshop tooling and no specialised adaptation; the clamp can be placed in line with other workholding elements for compact fixture design and predictable force vectors. Practical value for industry and trade Designed for machine shops, fixture builders and maintenance departments, this clamp delivers dependable performance without complex controls. The compact geometry and defined thread interface make it suitable for retrofits as well as new jig designs. Metav’s distribution and quality control in Emmerich add a layer of supply reliability and technical assurance for purchasing departments that prioritise consistent delivery and verified product condition. Secure fixtures efficiently with Kukamet’s 536 push‑rod clamp—contact Metav Werkzeuge for application matching and reliable supply from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 536-4-Q16 GTIN: 8680731504927 eClass: 21041716 ETIM: EC011973 Facts Clamping force (max): 4,500 N Holding force (max): 8,100 N Piston diameter: 16 mm Pressure spindle thread: M10x70 Weight: 1.03 kg Special features Horizontal foot mounting Galvanised finish with cast body Workholding element for fixtures and jigs Category: Spanner / clamp FAQ What is the maximum clamping force of this clamp? The 536 push‑rod clamp provides a maximum clamping force of 4.5 kN, with a holding force rated at 8.1 kN. Is the clamp suitable for use in machine‑shop environments? Yes — the galvanised cast body and compact horizontal‑foot design make the clamp suitable for standard machine‑shop fixtures and jigs. Which pressure spindle does the unit use? The unit is supplied with an M10x70 pressure spindle, providing a standard threaded contact for integration into tooling plates. How heavy is the clamp and how does that affect installation? The clamp weighs 1.03 kg, which permits easy handling during fixture assembly while retaining sufficient mass for stable clamping under load. Can this clamp be combined with other workholding elements? The horizontal mounting and standard spindle thread allow the clamp to be incorporated alongside other workholding components in modular fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17-42mm Closure Clamp Horizontal Foot With Spring, 220N Thrust, Stainless Steel - Kukamet
Combining stainless steel construction with a spring-loaded mechanism and a secure holding force, this clamp ensures reliable, low-maintenance fastening for industrial fixtures. Its adjustable arm and horizontal-foot mounting give versatile fit and simple integration. Order the 311 latch clamp directly via Metav Werkzeuge or ask our consultants if needed. 311 Latch Clamp — Stainless steel, spring-loaded horizontal-foot latch by Kukamet The 311 latch clamp is a spring-loaded stainless steel closure clamp with a horizontal foot, designed for secure fastening of panels, covers and fixtures in industrial and workshop applications. Spring-loaded over-centre action Stainless steel construction Adjustable arm 17–42 mm Holding force up to 325 N Secure, consistent fastening for repeatable processes The spring-loaded over-centre design provides consistent clamping and minimise the risk of loosening under vibration. With a rated holding force of up to 325 N and a maximum clamping force of 220 N, the closure offers dependable retention in repetitive assembly or transport situations. The mechanical action guarantees repeatable results without manual re-tensioning, supporting higher process reliability and reduced downtime. Flexible mounting and quick adjustment for different assemblies An adjustable arm that covers 17–42 mm enables rapid adaptation to varying panel thicknesses or flange gaps, reducing the need for multiple part variants. The horizontal foot mounting allows a compact installation profile where space is limited, while the integrated hook provides a secure engagement point. The specified thread length of 75 mm supports conventional fastenings and fine adjustment during setup, making the clamp suitable for jigs, enclosures and access doors. Corrosion resistance and minimal upkeep in demanding environments Constructed from stainless steel, the latch is suited to environments where corrosion resistance is required, resulting in low maintenance and prolonged service life. The spring element ensures constant preload while absorbing minor misalignments, and the robust hook design withstands repeated cycles. Together, these attributes reduce replacement frequency and support a stable long-term fixture solution. Contact Metav Werkzeuge for expert advice on the Kukamet 311 latch clamp and to request detailed technical information or configuration support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S311-3-Y GTIN: 8680731505702 Manufacturer: Kukamet Weight: 0.341 kg Core technical data Maximum clamping force: 220 N Maximum holding force: 325 N Arm range: 17–42 mm Thread length: 75 mm Weight: 0.341 kg Materials & features Material: stainless steel Attachment: horizontal foot With hook With spring Category: clamps FAQ What is the primary function of this latch clamp? The Kukamet 311 latch clamp is designed to provide secure, repeatable closure for panels and fixtures, offering a spring-loaded over-centre action and a reliable holding force for industrial applications. Can the clamp accommodate different panel thicknesses? Yes. The adjustable arm range of 17–42 mm allows the 311 latch clamp to be adapted to various gaps and panel thicknesses during installation. Is this clamp suitable for corrosive environments? The 311 latch clamp is made from stainless steel, which offers enhanced corrosion resistance and reduced maintenance in humid or corrosive settings. How is the clamp mounted? The unit is designed for horizontal-foot mounting and includes a hook engagement; a thread length of 75 mm permits standard fastening and fine positional adjustment. What load values should be considered for safety? Reference the maximum clamping force of 220 N and the holding force of 325 N when designing fixtures; these values indicate the clamp’s reliable retention and clamping capability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17-42mm Toggle Clamp Horizontal Foot With Spring And Safety Catch, Stainless Steel - Kukamet
Rely on the combination of stainless-steel durability, a spring-loaded safety lock and an adjustable arm for secure, repeatable clamping in production and assembly environments; order the unit directly via Metav Werkzeuge or ask our consultants for application support. 311 toggle latch clamp S311-3-Y-L – stainless steel, spring-loaded safety lock The 311 toggle latch clamp is a horizontal-mounted clamp designed to secure fixtures, closures and jigs with fast actuation and reliable retention. Stainless steel construction Spring-loaded with safety lock Horizontal foot for secure mounting Adjustable arm 17–42 mm Holding force up to 325 N Reliable retention that reduces rework and downtime The clamp delivers both a clear clamping force and a higher holding force, ensuring that fixtures remain stable during processing and handling. The difference between the two is straightforward: clamping force is the pressure applied when the latch is engaged, while holding force describes resistance to separation under load. With a measured holding capability of 325 N, this device provides secure positioning for light to medium-duty tasks, reducing the likelihood of part movement and subsequent rework. The clear numeric values support planning for fixture design and process reliability. Corrosion-resistant build for long service life Manufactured from stainless steel, the device is optimised for environments where rust resistance and hygiene are important. The robust material choice minimises maintenance intervals and extends service life compared with plated or painted alternatives. For operators who need predictable performance over many cycles, the corrosion-resistant construction means fewer unexpected replacements and a lower total cost of ownership for the clamping station. This is particularly relevant where regular cleaning or exposure to humidity occurs. Fast, safe operation with integrated spring and lock Operation is rapid thanks to the spring-loaded mechanism, which returns the latch to position and speeds repetitive cycles. The integrated safety lock prevents accidental release during vibration or handling, improving process safety and protecting components in transit or machining. The clamp’s simple lever action supports efficient handling on assembly lines and jigs, delivering both speed and a defined locked state so that operators can rely on consistent engagement without additional fixtures. Flexible mounting and straightforward adjustment A horizontal foot simplifies installation on flat fixture plates; the arm is adjustable from 17–42 mm, enabling adaptation to different flange heights and closure gaps without replacing hardware. Thread length of 75 mm allows secure fixation and a range of fastener choices. The presence of a hook option permits use as a latch for doors or panels as well as direct clamp applications. Such adaptability makes the component suitable for diverse applications in assembly, packaging and light fabrication. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Kukamet 311 toggle latch clamp into production processes and to discuss available quantities and delivery options Technical data Article number: S311-3-Y-L GTIN: 4061905080159 Manufacturer: Kukamet Core specifications Weight: 0.341 kg Arm range: 17–42 mm Max clamping/pressure force: 220 N Max holding force: 325 N Thread length: 75 mm Materials & features Material: stainless steel Mounting: horizontal foot Spring-loaded operation Safety lock included With hook Category: spanner FAQ What is the difference between clamping force and holding force? Clamping force refers to the pressure applied during engagement, while holding force indicates resistance to separation; the Kukamet 311 toggle latch clamp specifies a clamping pressure of 220 N and a holding capability of 325 N. Can the clamp be mounted on standard fixture plates? Yes, the horizontal foot design allows direct mounting to flat plates; the 75 mm thread length supports various fasteners and secure attachment. Is the clamp suitable for use in humid or washdown environments? The stainless-steel construction of the 311 toggle latch clamp improves corrosion resistance, making it appropriate for conditions where moisture or regular cleaning is expected. How is the arm adjustment achieved and what range is available? Adjustment is made by repositioning the arm within the 17–42 mm range to match component thickness or gap; this allows flexible use across several fixture designs. Can this clamp function as a latch for doors or panels? Yes, the integrated hook and spring-loaded action permit use as a latch for closures as well as for direct clamping duties in jigs and fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700 N Hold Force Horizontal Foot Push Rod Clamp 1.5 kN Thrust, Blackened Finish - Kukamet
Take advantage of a compact clamp that combines a 1,500 N clamping force, a 1,700 N holding force and a lightweight design for reliable fixture work in tight setups; its horizontal-foot mounting and M6 x 40 pressure spindle simplify integration into existing jigs. Order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if additional specification details are required. Push-rod clamp 511 — horizontal-foot mounting, 1.5 kN clamping force (Kukamet) The Push-rod clamp 511 is a compact industrial clamp designed for short-stroke fixture applications, offering robust clamping and secure holding in machining and assembly environments. Compact 1.5 kN clamping force for secure fixing Horizontal-foot mounting for space-saving installation Lightweight construction at 0.28 kg for easy handling Blackened finish for corrosion resistance and reduced reflections Assured clamping power for repeatable production results The clamp delivers a maximum clamping force of 1,500 N and a holding force of 1,700 N, values that support consistent fixturing under dynamic loads. These rated forces translate into reliable part retention during operations such as light milling, drilling or assembly, reducing the risk of movement that can cause rejects. The registered spindle thread M6 x 40 permits fine contact pressure adjustment; the threaded pressure spindle enables controlled compression and compensation for minor part tolerances. Such quantifiable performance figures make the component a predictable element within quality-controlled workflows. Space-efficient mounting with straightforward integration Thanks to the horizontal foot mounting, the clamp fits onto base plates and fixtures where vertical clearance is limited, offering a low-profile option for compact jigs. The body’s blackened finish provides basic corrosion protection and minimises glare under workshop lighting, supporting visual inspection tasks. At 0.28 kg, the device imposes minimal additional mass on moving fixtures and is easy to position during assembly. The mechanical design emphasises simplicity: fixed mounting holes and a direct actuation path reduce installation time and lower the need for subsequent adjustments. Practical benefits for everyday workshop use Material selection and finish ensure a low-maintenance component that integrates into mixed-tooling environments. The clamp’s compact footprint and measurable force ratings allow planners to standardise on a single clamping solution for small- to medium-sized parts, simplifying inventory and fixture design. Where quick part changes are required, the rigid holding characteristic helps maintain process repeatability; this reduces setup iterations and supports smoother production sequences. The device suits users who prioritise dependable mechanical performance over complex actuation systems. Secure production reliability with Kukamet’s 511 clamp — contact Metav Werkzeuge for technical advice and supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B511-2 Model: 511 GTIN: 8680731503869 ECLASS: 21041716 ETIM: EC011973 Facts Clamping force, max: 1,500 N Holding force, max: 1,700 N Weight: 0.28 kg Pressure spindle: M6 x 40 Special features Mounting type: horizontal foot Finish: blackened Special feature: none FAQ What applications is this clamp suitable for? The Push-rod clamp 511 from Kukamet is suitable for short-stroke clamping in machining, assembly and inspection jigs where a compact, mechanically robust clamp is required. How is the clamp mounted to a fixture? Mounting is achieved via the horizontal foot; the clamp’s base allows direct attachment to plates or fixture blocks compatible with horizontal-foot clamps. Can the contact pressure be adjusted? Yes. The M6 x 40 pressure spindle permits adjustment of the contact point and pressure for compensation of small part height variations when using the Push-rod clamp 511. What finish does the clamp have and why does it matter? The clamp features a blackened finish which offers basic corrosion resistance and reduces reflective glare, aiding visual tasks and longevity under normal workshop conditions. Is the clamp suitable for portable fixtures and frequent repositioning? At 0.28 kg the clamp is lightweight and therefore well suited to portable or frequently reconfigured fixtures where easy handling is an advantage. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700 N Hold Force Pushrod Clamp Vertical Foot, Zinc Plated, 1500 N Thrust - Kukamet
Combine the compact design, zinc-plated corrosion resistance and impressive 1,500 N clamping capacity to keep fixtures secure and production steady. Order the push‑rod clamp directly via Metav Werkzeuge or contact our consultants for application advice. Push-rod clamp 512 — vertical-foot clamping unit with zinc plating and 1,500 N force (Kukamet) A Push-rod clamp 512 for secure workholding in jigs and fixtures, designed with a vertical foot for sturdy mounting and a compact profile suited to dense assembly environments Zinc-plated steel finish Max. clamping force 1,500 N Holding force up to 1,700 N Compact weight 0.28 kg, vertical foot Consistent, measurable clamping for repeatable production The unit delivers a clear performance advantage where reliable force and repeatability matter. With a maximum clamping force of 1,500 N and a holding force of 1,700 N, the clamp converts input actuation into stable workpiece retention; clamping force refers to the active pressure applied during engagement, while holding force denotes resistance to displacement once engaged. This distinction ensures correct selection for fixtures that require both initial bite and sustained retention. The robust force figures support shorter cycle times and reduce rework, making the component particularly suited to batch production and light assembly lines where precision under repeated operation is essential. Durable finish and compact mounting for tight spaces A zinc-plated surface provides basic corrosion protection and long service life in workshop environments where humidity and coolant spray are present. The compact mass of 0.28 kg keeps inertia low and simplifies handling during installation, while the vertical foot mounting offers a secure base for perpendicular attachment to plates and fixture frames. The compact footprint enables denser placement of clamps in modular fixture plates, improving part accessibility without compromising strength. For users transitioning from temporary setups to permanent assembly fixtures, the combination of corrosion resistance and small form factor reduces the need for bulky supports and streamlines fixture design. Straightforward integration and low-maintenance operation The clamp is supplied with an M6x40 pressure spindle, enabling standardised adjustment and straightforward replacement with common workshop hardware. The simple mechanical design minimises wear points and facilitates routine checks; cleaning and occasional lubrication of the spindle keep the unit functioning consistently. Because the construction relies on proven mechanical principles rather than complex internals, downtimes are reduced and in-house maintenance remains feasible for small maintenance teams. Typical applications include small-part assembly, light machining jigs and test fixtures where fast engagement, clear force ratings and compact mounting matter more than elaborate automation. For dependable fixture clamping from Kukamet, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 512-2 GTIN: 8680731502664 Manufacturer: Kukamet Facts Clamping force (max): 1,500 N Holding force (max): 1,700 N Weight: 0.28 kg Pressure spindle: M6x40 eClass: 21041716 ETIM: EC011973 Special features Zinc-plated Vertical foot mounting Category: Clamping Datasheet: 512-513-katalogseite.pdf FAQ What is the difference between clamping force and holding force? Clamping force is the active pressure applied during engagement; holding force is the resistance to movement once the clamp is engaged. The Push‑rod clamp 512 by Kukamet provides a maximum clamping force of 1,500 N and a holding force up to 1,700 N. Can this clamp be mounted on a fixture plate with standard fasteners? Yes. The vertical foot and compact design allow secure attachment with common fasteners; the supplied M6x40 pressure spindle supports standard workshop hardware and straightforward installation. Is the surface suitable for humid or coolant‑exposed environments? The zinc‑plated finish offers basic corrosion protection suitable for many workshop conditions. For aggressive environments, consider additional protective measures beyond the clamp’s standard plating. Which applications suit this clamp best? The clamp is intended for jigs, fixtures and light assembly where repeatable clamping and compact mounting are required. It fits scenarios prioritising secure workholding over heavy‑duty machining. How is maintenance handled for the unit? Maintenance is minimal: periodic cleaning and spindle lubrication preserve function. The simple mechanical design of the Kukamet clamp allows in‑house servicing with standard tools. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com