Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
3700N Holding Force 2500N Thrust Rod Clamp Horizontal Base Zinc Plated Cast Body - Kukamet
Take advantage of the combination of compact design, 2,500 N pressing force and a zinc-plated cast body for reliable fixture performance; order the clamp directly via Metav Werkzeuge or contact our consultants for specification advice. Push‑rod clamp 532 — horizontal foot, 2.5 kN pressing force (Kukamet) The Push‑rod clamp 532 is a compact push‑rod clamping element for fixture and workholding applications, engineered for horizontal‑foot mounting and reliable repetitive operation. Kukamet push‑rod clamp 532 Horizontal‑foot mounting for stable fixing 2,500 N pressing force for secure clamping Zinc‑plated cast body for corrosion resistance Secure hold for production and jigging The clamp delivers a pressing force of 2,500 N and a holding force of 3,700 N, values that are decisive for dependable positioning and stability during machining or assembly cycles. The 12 mm piston diameter concentrates force with a compact footprint, making the unit suitable where space is limited but consistent clamping is required. Built to provide reproducible contact pressure, the device reduces cycle variability and supports efficient downstream processing through stable workpiece retention. Fast integration and reduced setup time Fitted with a horizontal foot and a pressure spindle sized M8x50, the component is designed for straightforward attachment to standard fixture plates and compatible bases. The clamp’s low mass (0.59 kg) simplifies handling during jig assembly and limits additional load on moving fixtures. As a result, set‑up time is shortened and fixtures can be modified or reconfigured with minimal effort, improving machine availability and contributing to leaner production flows. Durable construction for long service life A zinc‑plated cast body combines mechanical strength with corrosion protection, ensuring the clamping element withstands workshop conditions and routine handling. Surfaces are treated to resist wear and environmental influence, so maintenance intervals are extended and replacement cycles are reduced. The straightforward mechanical design supports uncomplicated inspection and servicing; common adjustments can be made without specialist tools, supporting a dependable, low‑effort maintenance routine. Contact Metav Werkzeuge today for detailed technical guidance, compatibility checks or a tailored quotation for the Kukamet push‑rod clamp 532 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 532-3-Q12 GTIN: 8680731504446 Manufacturer: Kukamet Facts Pressing force max: 2,500 N Holding force max: 3,700 N Piston diameter: 12 mm Weight: 0.59 kg Pressure spindle: M8x50 eClass: 21041716 ETIM: EC011973 Materials and features Material: zinc‑plated with cast body Mounting: horizontal foot Category: Spanner Story trigger: lever clamp FAQ What maximum clamping and holding forces does the clamp provide? The clamp provides a maximum pressing force of 2,500 N and a holding force of 3,700 N, as specified for the Kukamet push‑rod clamp 532 (SKU 532-3-Q12). How is the clamp mounted in a fixture? Mounting is via a horizontal foot; the unit is delivered for horizontal‑foot installation and is compatible with standard fixture plates using the M8x50 pressure spindle. What is the weight and how does it affect fixture design? The unit weighs 0.59 kg, which minimises added mass to moving assemblies and simplifies manual handling during fixture assembly. Is the clamp suitable for harsh workshop conditions? The clamp’s zinc‑plated cast body provides corrosion resistance and mechanical robustness, supporting reliable operation in typical workshop environments. How large is the piston and why does this matter? The piston diameter is 12 mm, which concentrates clamping force in a compact form and contributes to consistent contact pressure across repeated cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3700N Three-Point Push Rod Clamp Horizontal Foot, 3500N Thrust, Black Oxide - Kukamet
Take advantage of a compact clamp that combines 3,500 N clamping force, a 3,700 N holding capacity and a corrosion-resistant black blued finish for reliable fixture performance; order the push-rod clamp directly via Metav Werkzeuge or consult their specialists for fitment advice. Push-rod clamp 511 (B511-5) – horizontal-foot, 3,500 N clamping force (Kukamet) The Push-rod clamp 511 is a compact horizontal-foot clamp designed for secure workpiece fixation in jigs, fixtures and assembly stations where repeatable clamping and simple integration are required Horizontal-foot mounting for stable fixture integration Clamping force up to 3,500 N for secure fixation Holding force 3,700 N for retention under load Black blued finish for corrosion resistance High clamping performance for consistent production results The compact design delivers a defined clamping force of 3,500 N, providing the power needed to keep components immobilised during machining or assembly. The higher holding force of 3,700 N indicates the clamp’s retention capability when lateral or vibrational loads occur. Specified forces are given as objective measures to support fixture calculation and ensure process reliability. The lightweight construction at 0.96 kg keeps the total fixture mass low, aiding dynamic tooling setups and reducing strain on adjustable mounts. Easy mounting and predictable adjustment speed up setup With a horizontal foot for fast bed attachment and an M10x70 pressure spindle, the unit integrates into standard fixture plates and allows fine preloading of the workpiece. The spindle thread size and length support controlled contact pressure and repeatable clamp positioning; this reduces cycle-time variability and simplifies repeat setups. The clamp’s push‑rod mechanism converts operator or actuator movement into a linear clamping action, making it suitable for both manual fixtures and automated transfer lines. Robust finish and compact form for long service life Surface protection in a black blued treatment resists corrosion in workshop environments and helps maintain sliding surfaces and contact geometry. The unit’s compact footprint and straightforward kinematics reduce potential snag points and ease maintenance intervals. Constructed for routine industrial use, the device offers a balance of durability and serviceability that supports long-term, low-maintenance operation in production and assembly areas. Versatile use across jigs, fixtures and assembly aids Designed as a straightforward clamping element for general-purpose fixtures, the model suits assembly jigs, testing rigs and light machining fixtures where controlled linear force is required. The push-rod layout provides a direct clamping motion that can be paired with locating pins or stops to create reproducible positioning. For integrators and maintenance teams the clear numerical data allow rapid assessment of suitability for specific workpiece geometries and load cases; the B511-5 name appears on technical drawings and bill of materials for unambiguous component identification. Contact Metav Werkzeuge for specialist advice on integrating the Kukamet B511-5 push-rod clamp into existing fixtures and for supply direct from Emmerich via eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: B511-5 GTIN: 8680731503883 Manufacturer SKU: B511-5 Facts Clamping force (max): 3,500 N Holding force (max): 3,700 N Weight: 0.96 kg Pressure spindle: M10x70 Mounting: horizontal foot Special features Finish: black blued Mounting type: waagerechter Fuß (horizontal foot) Category: Spanner ETIM: EC011973 eCl@ss: 21041716 FAQ What maximum clamping force does the clamp provide? The clamp delivers a clamping force of 3,500 N, with an indicated holding capacity of 3,700 N, making it suitable for secure fixation in many jig and fixture applications. Can the clamp be mounted to standard fixture plates? Yes, the clamp uses a horizontal foot for direct attachment to fixture plates and includes an M10x70 pressure spindle for adjustment and preloading. What surface treatment does the unit have and why does it matter? The component has a black blued finish which reduces corrosion and helps preserve moving and contact surfaces in workshop conditions. Is the clamp suitable for automated systems? The push‑rod kinematics and compact mass (approx. 0.96 kg) allow integration with manual and automated fixtures where linear clamping action is required. Which model designation should be used in documentation? Use the designation B511-5 or the description Kukamet push-rod clamp 511 for bills of material and assembly drawings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
375mm Closure Clamp 15kN Thrust, 17kN Holding Force, Zinc Plated With Hook, Vertical Base, Extended Special Arm - Kukamet
Take advantage of the combination of high holding capacity, an extended 375 mm reach and robust zinc‑plated protection to secure large or awkward workpieces reliably. Order the clamp directly via Metav Werkzeuge or ask our consultants for specification support. 333 Latch Clamp – Latching hold‑down clamp with extended special arm, vertical foot (Kukamet) A 333 latch clamp designed for heavy‑duty fixturing and secure closure tasks, featuring a long 375 mm arm and a vertical‑mount foot for stable installation. Extended 375 mm special arm Vertical‑foot mounting for stability Zinc‑plated for corrosion resistance High holding force: 17 kN Secure holding where strength matters The clamp delivers a holding force of 17,000 N and a maximum pressing force of 15,000 N, providing quantifiable security for demanding jigs and fixtures. These two forces serve different functions: pressing force is the active closure capability, while holding force indicates the retained grip under load. For planners and purchasers, the clear numeric values simplify risk assessment and load calculations, enabling selection based on measurable performance rather than subjective claims. Greater reach and flexible mounting reduce set‑up time With a 375 mm arm and a thread length of 400 mm, the device extends reach to accommodate deep or offset workpieces without complex adapter solutions. The vertical foot configuration provides a compact base for upright installations, and the integrated hook enables rapid engagement in repetitive processes. These features reduce the need for bespoke fixturing, shorten machine idle time and improve throughput in small‑batch and series production. Robust finish for workshop longevity Constructed from zinc‑plated steel, the clamp resists surface corrosion in humid or oily environments commonly found in production shops. The protective finish lowers maintenance frequency and keeps mechanical interfaces consistent over many cycles, supporting predictable clamping behaviour. The lightweight construction at 1.19 kg balances sturdiness with ease of handling during assembly and reconfiguration. Easy specification and traceable procurement The item is identifiable for procurement and inventory management by SKU 333-4-L-M12-C2 and GTIN 8682843521007, supporting error‑free ordering and traceability in bills of materials. Classification codes such as the listed eClass and ETIM entries assist integration into electronic catalogues and CAD part libraries. For engineers seeking reliable repeatability, the clamp’s clear technical data and standard connection geometry enable fast BOM insertion and consistent interchangeability across stations — the 333 latch clamp suits production environments where predictable clamping equals uptime. Choose Kukamet’s 333 latch clamp for robust, measurable clamping performance and contact Metav Werkzeuge for tailored advice and swift supply from our Emmerich hub. Technical data SKU: 333-4-L-M12-C2 GTIN: 8682843521007 eClass: 21041718 ETIM: EC011973 Core data Arm length: 375 mm Thread length: 400 mm Weight: 1.19 kg Pressing force (max): 15,000 N Holding force (max): 17,000 N Design & features Material: zinc‑plated steel Mounting: vertical foot Special feature: extended special arm With hook: yes FAQ What maximum load can this clamp handle? The clamp provides a holding force of 17,000 N and a maximum pressing force of 15,000 N; these figures should be used to verify suitability for the intended fixturing application. Is the clamp suitable for outdoor or humid workshop environments? The zinc‑plated finish offers corrosion resistance suitable for many workshop conditions; further surface protection can be applied if the application demands enhanced durability. How is the clamp mounted and what does the vertical foot imply? Mounting uses the vertical foot configuration which enables upright installation on plates or fixtures, offering a compact footprint and stable attachment for repeated operations. Can the device engage hooked fixtures directly? Yes — the unit is supplied with a hook, allowing direct engagement in latching applications and simplifying rapid part transfer and closure sequences. How to order with exact identification? Order using SKU 333-4-L-M12-C2 or GTIN 8682843521007; refer to the technical data when specifying the component in procurement or CAD systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
38mm Vertical Clamp 750N Closing Force, Massive Hold Arm, Zinc-Plated - Kukamet
Take advantage of the combination of a galvanised finish, a massive holding arm and compact 38 mm reach to ensure secure, repeatable clamping in fixtures and jigs. Order the component directly via Metav Werkzeuge or contact their consultants for application-specific advice. Vertikalspanner 213 — Vertical lever clamp, galvanised, 38 mm arm (Kukamet) The Vertikalspanner 213 is a precision vertical lever clamp intended for secure workholding in jigs, small assemblies and repetitive fixture operations. Compact 38 mm arm for tight fixtures Galvanised finish for corrosion resistance Robust holding arm design for long life 1,000 N nominal holding force for secure clamping Consistent clamping force for repeatable production The vertical lever design provides a clear distinction between actuation and retention: the specified 750 N actuation or pressing force engages the mechanism, while the rated 1,000 N holding force maintains the workpiece securely. This separation of forces reduces the risk of slippage under load and contributes to predictable process outcomes in repetitive tasks. The 38 mm arm length gives a compact reach that is particularly useful where space is restricted, allowing reliable engagement without compromising operator access or fixture layout. Built for durability and simple integration A galvanised surface finish enhances corrosion resistance for industrial environments, while the massive holding arm increases resistance to wear and mechanical stress during frequent cycles. At just 0.151 kg, the unit is lightweight enough to be integrated into portable jigs yet robust in structure. The angle-foot mounting offers a stable attachment to plates and fixture bases, enabling straightforward installation into existing setups and reducing time spent on fixture adaptation. Practical benefits that improve workflow efficiency As a lever clamp in the Kukamet range, this device reduces setup time and supports quick clamping and unclamping, which speeds up throughput on repetitive operations. The clear mechanical action and compact footprint minimise the likelihood of incorrect engagement, contributing to consistent assembly quality. Where reliable retention and fast cycle rates matter, this clamp combines simple mechanics with effective holding characteristics to support smoother production runs. Contact Metav Werkzeuge for tailored advice and to secure supply of the Kukamet Vertikalspanner 213 directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 213-1-D-C1 GTIN: 8680731505849 Manufacturer: Kukamet Model: 213 Category: Spanner Facts Arm length: 38 mm Max pressing force: 750 N Max holding force: 1,000 N Weight: 0.151 kg Special features Material: galvanised Mounting: angle-foot Massive holding arm Category: lever clamp FAQ What holding force does this clamp provide? The Vertikalspanner 213 delivers a holding force of 1,000 N; the actuation or pressing force is 750 N for engagement, offering secure retention under typical fixture loads. How is the clamp mounted to a fixture? Mounting uses an angle-foot arrangement that secures the clamp to plates or fixture bases; the compact design facilitates integration into jigs without major modifications. Is the finish suitable for workshop environments? Yes, the galvanised finish on the Vertikalspanner 213 provides corrosion resistance appropriate for most workshop and industrial settings, extending service life. Can this clamp speed up repetitive assembly tasks? The lever clamp design supports fast clamping and unclamping cycles; the consistent mechanical action of the Kukamet unit helps reduce setup time and improve repeatability. What is the exact arm reach of the clamp? The clamping arm has a reach of 38 mm, making it suitable for tight fixture spaces where compact engagement is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
38mm Vertical Clamp With Massive Holding Arm And Safety Lock, 750N Pressure / 1000N Hold - Kukamet
Take advantage of the galvanised construction, 750 N clamping force and a heavy-duty 38 mm arm for reliable, repeatable workholding; order directly via Metav Werkzeuge or consult the team for specification support. Vertical clamp 213 by Kukamet — galvanised vertical lever clamp with safety lock Vertical clamp 213 is a compact lever-operated vertical clamp intended for secure workholding in workshop and industrial clamping applications. Robust 38 mm holding arm Galvanised corrosion protection 750 N clamping force Integrated safety lock Reliable clamping for repeatable production The vertical lever design delivers a consistent clamping force of 750 N and a holding capacity rated at 1000 N, providing measurable, repeatable restraint for production and assembly tasks. The distinction between clamping and holding values ensures that temporary actuation and sustained retention are both quantified: the specified figures enable process planners to calculate safety margins and cycle capability. This engineered certainty supports efficient fixturing and reduces rework, making the component suitable for repetitive workflows where predictable force values are required. Built to last in workshop conditions Constructed from galvanised steel, the device resists corrosion in workshop environments and retains functional integrity over prolonged use. A heavy-duty 38 mm arm provides a rigid contact point that minimises deflection under load, while the compact overall footprint keeps bench space free for other operations. The angled foot mounting simplifies integration into existing jigs and fixtures, enabling stable attachment without extensive modification. These design choices combine to reduce maintenance intervals and ensure continuous operation in routine industrial settings. Safe, simple integration and operation An integrated safety lock prevents unintended release during handling or vibration, improving operator confidence and process safety. The clamp’s lever action offers rapid engagement and release, shortening cycle times and supporting lean production aims. At a weight of only 0.15 kg the component is easy to position and replace, yet delivers the mechanical performance expected from a larger assembly. Technical teams benefit from clear, domain-specific data — such as force ratings and mounting type — which facilitates specification and quality control in procurement documentation. Choose the Kukamet 213 for dependable vertical clamping and contact Metav Werkzeuge for technical advice and reliable supply from Emmerich. Technical data SKU: 213-1-D-L-C1 GTIN: 8682843520314 Model: 213 Category: Spanner ECLASS: 21041717 ETIM: EC011973 Core specifications Arm diameter: 38 mm Clamping force (max): 750 N Holding force (max): 1000 N Weight: 0.15 kg Materials & features Material: Galvanised Mounting: Angled foot Heavy-duty holding arm Safety locking mechanism Compact lever clamp design FAQ What maximum clamping and holding forces are specified for the clamp? The clamp specifies a maximum clamping force of 750 N and a holding force of 1000 N, which are intended to guide fixture design and safety margins for production use. Is the clamp suitable for outdoor or humid workshop environments? The galvanised finish provides improved corrosion resistance, making the clamp appropriate for humid workshop conditions; regular inspection is still recommended for outdoor exposure. How is the clamp mounted and what does the angled foot offer? Mounting is via an angled foot (Winkelfuß), which allows secure attachment to fixtures or benches and facilitates stable load transfer without complex brackets. Does the device include a safety feature to prevent accidental release? Yes, the clamp is fitted with an integrated safety lock that secures the lever in the engaged position to prevent unintended opening under vibration or during handling. Which SKU and manufacturer identify this product for procurement? The product is sold as SKU 213-1-D-L-C1 and is manufactured by Kukamet as the Vertical clamp 213. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
38mm Vertical Clamp With Massive Holding Arm, 750N Press Force, 1000N Holding Force - Kukamet
Benefit from the combination of a massive holding arm, a compact 38 mm arm and dependable clamping power for consistent fixture performance. Order the vertical clamp 213 directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 213 by Kukamet — compact design with robust holding arm Vertical clamp 213 is a vertical toggle clamp designed for secure holding and repeatable positioning in limited spaces, suitable for jigs, fixtures and light production tasks. Massive holding arm 38 mm Max. holding force 1,000 N Clamping force up to 750 N Right‑angle base for secure mounting Robust clamping where space is tight The massive holding arm provides stability in confined set-ups while the compact footprint keeps the clamp unobtrusive on the workbench. A 38 mm arm gives a favourable contact surface that helps distribute load and reduces workpiece deformation during clamping. The blackened finish offers a basic layer of corrosion resistance, ensuring that the fixture retains its appearance and function in standard workshop environments. This combination of robustness and compactness supports reliable repeatability for small-batch production and assembly tasks. Measured clamping power for reproducible results Specified forces ensure predictable clamping behaviour: a 1,000 N holding force and up to 750 N clamping force enable secure fixation of parts during machining, assembly or inspection. Newton values describe the mechanical force directly; for practical orientation, these figures suit light to medium clamping demands where consistent pressure and positional stability are required. The clamp’s mechanism converts operator input into repeatable holding force, reducing set-up variability and helping to maintain production quality. Fast fitting and maintenance-friendly design The right‑angle mounting foot simplifies integration into existing fixtures and tooling plates, allowing the clamp to be bolted down rigidly for direct load transfer. At just 0.151 kg, the component is lightweight yet sturdy, easing handling during jig assembly and replacement. The straightforward geometry of the toggle mechanism permits quick cleaning and inspection; wear parts can be monitored visually and replaced when required, contributing to predictable maintenance intervals and lower downtime in day-to-day use. For tailored clamping solutions from Kukamet and reliable supply from Metav Werkzeuge, contact Metav Werkzeuge for a bespoke quotation or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B213-1-D-C1 GTIN: 8682843522400 Designation: Vertical clamp 213 Facts Arm length: 38 mm Weight: 0.151 kg Clamping force: 750 N Holding force: 1,000 N eClass: 21041717 ETIM: EC011973 Special features Blackened finish Massive holding arm (massiver_arm) Right‑angle foot mounting (Winkelfuß) Brand: Kukamet FAQ What maximum holding force does this clamp provide? The Kukamet vertical clamp 213 offers a maximum holding force of 1,000 N as specified for secure part retention. Which clamping force can be expected during operation? Clamping force is rated up to 750 N, giving consistent pressure suitable for light to medium tasks with reproducible results. How is the clamp mounted to a fixture? The clamp is fitted using its right‑angle base, allowing bolted attachment to tooling plates or jig frames for rigid installation. What finish does the clamp have and how does it affect corrosion resistance? The component has a blackened finish, which provides basic surface protection and a durable appearance under normal workshop conditions. Is the clamp suitable for production jigs and assembly fixtures? Yes, the compact footprint, robust arm and repeatable force make the clamp well suited to jigs, fixtures and light production assembly. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
3mm Vertical Clamp With Angle Base, Max Clamping Force 2,500 N, Max Thrust 1,400 N - AMF
Take advantage of the combination of compact design, high holding performance and easy integration for reliable fixture setups; the vertical clamp delivers a maximum holding force of 2,500 N and a clamping force of 1,400 N, supplied with an angled foot and an M8 x 45 pressure screw. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp No. 6803, Size 3 – Angled foot (AMF) A Vertical clamp No. 6803 engineered for secure workholding in machining and fixture assemblies, supplied with an angled foot for flexible mounting. High holding force 2,500 N Maximum clamping force 1,400 N Angled foot for versatile mounting Includes M8 x 45 pressure screw Secure clamping power that improves process reliability The clamp offers robust holding performance, with a rated holding force of 2,500 N and a maximum clamping force of 1,400 N, ensuring components remain stable during cutting, drilling and light milling operations. These figures translate into fewer re-clamps and fewer rejected parts, which supports higher first-pass yield and steadier throughput. The integrated pressure screw (M8 x 45) provides consistent actuation force for repeatable set-ups, while the standardised Size 3 footprint simplifies replacement in existing fixtures. Flexible mounting and compact footprint for tighter fixtures Equipped with an angled foot, the device enables alternative mounting orientations where vertical space or access is restricted. The compact dimensions and standardised attachment points allow the unit to be positioned close to the workpiece without obstructing tools, reducing setup times and improving access for operators. The angled base design supports versatile clamping geometries in jigs and modular fixturing systems, increasing layout options on small and medium-sized workbenches. Fast integration into workshop workflows Designed for industrial and trade environments, the vertical clamp integrates into common fixture plates and modular tooling with minimal adjustment. The simple mechanical construction reduces maintenance needs and keeps downtime low; the pressure screw and mounting points follow familiar standards to ease retrofitting. By delivering consistent clamping force and rapid installation, the clamp contributes to shorter cycle planning and greater operational predictability on the shop floor. Suitable applications and compatibility The clamp is intended for general fixturing duties in metalworking and assembly contexts where reliable vertical holding is required. Typical applications include small-batch machining, fixture prototyping and repetitive assembly stations. Its Size 3 specification and compact geometry make it particularly suited to workshops and production lines that prioritise adaptable, space-efficient clamping solutions rather than large, fixed vices. For tailored fixturing recommendations or to place an order for the AMF vertical clamp No. 6803, contact Metav Werkzeuge — specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with integration and application details Technical data Article number: 4123590130NW Type: 6803 Product: Vertical clamp, Size 3, angled foot Manufacturer: AMF Facts Max clamping force: 1,400 N Max holding force: 2,500 N Size: 3 Packaging unit: 1 Pressure screw: M8 x 45 Angle a: 105° H: 71 mm H1: 223 mm L1: 111 mm Special features Angled foot for flexible mounting Standardised Size 3 dimensions Compact footprint for tight fixtures Repeatable clamping with M8 x 45 pressure screw FAQ What maximum forces can the clamp handle? The vertical clamp delivers a maximum clamping force of 1,400 N and a holding force up to 2,500 N, suitable for secure fixturing in many machining tasks. Is the angled foot suitable for horizontal plates? Yes, the angled foot provides alternative mounting angles and is designed to fit on standard fixture plates, enabling compact and adaptable placement. Which pressure screw is supplied with the clamp? The unit is supplied with an M8 x 45 pressure screw as standard to ensure consistent actuation and repeatable clamping behaviour. Can this clamp be used in modular jig systems? The Size 3 standardised dimensions make the clamp compatible with many modular fixturing systems and straightforward to integrate into existing jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.5 kN Push Rod Clamp Horizontal Foot Zinc-Plated Cast Body 16mm Piston - Kukamet
Benefit from the combination of high clamping force, a corrosion-resistant galvanised cast body and compact weight for a reliable, smooth production flow; order the 535 push-rod clamp directly via Metav Werkzeuge or consult our specialists if necessary. 535 Push-rod clamp — horizontal foot mounting, 4,500 N max clamping force (Kukamet) The 535 is a push-rod clamp designed for horizontal installation to secure workpieces reliably in workshop jigs and production fixtures. Horizontal foot for stable mounting Max clamping force 4,500 N Galvanised cast body for durability Lightweight: 1.03 kg for easy handling Dependable clamping power for repetitive production The clamp delivers a max clamping force of 4,500 N combined with a holding force of 4,700 N, enabling consistent, reproducible fixation in series production and repetitive machining tasks. High clamping figures translate into reduced slippage and more predictable outcomes during milling, drilling or assembly operations. The unit’s mechanical design focuses on direct force transmission via the push-rod, which ensures efficient transfer of clamp pressure without complex linkages. This efficiency supports faster cycle times and fewer rework instances, contributing measurable improvements to throughput and process reliability. Robust construction that reduces downtime Built around a galvanised cast body, the clamp resists corrosion and mechanical wear in workshop environments where coolants, oils and swarf are present. Galvanising provides a protective zinc layer that slows surface oxidation, extending service life and lowering maintenance frequency. The compact piston with diameter 16 mm is engineered for balanced force distribution and minimal play, which preserves clamping accuracy over prolonged use. These construction choices reduce the need for frequent replacements and help maintain stable clamping behaviour across production batches. Compact fitment and quick installation The horizontal foot configuration facilitates straightforward integration into fixtures and machine tables, while the thrust spindle M10 x 70 allows fine adjustment of contact pressure and position. At 1.03 kg, the unit is light enough for easy handling during setup yet sufficiently robust for industrial use. The clamp’s compact footprint makes it suitable where space is constrained, enabling closer fixture layouts and more efficient use of table area. Reduced setup complexity contributes to faster changeovers and improved overall equipment effectiveness. Suitable for workshop and industrial fixtures As a specialist clamping element, this push-rod device is appropriate for jigs, assembly stations and smaller CNC fixtures that demand secure, repeatable clamping. The simple mechanical design supports maintenance-friendly service procedures and straightforward replacement of wear parts such as the thrust spindle. Backed by a vendor with a European quality filter and a broad product range, the clamp can be sourced as part of a coordinated tooling strategy to standardise clamping across multiple workstations and machines. Request tailored advice from Metav Werkzeuge to integrate the 535 push-rod clamp into production fixtures or to discuss compatible accessories and fixture layouts Technical Data SKU: 535-4-Q16-L GTIN: 8682843521243 Article name: Push-rod clamp (designation 535) Brand: Kukamet Facts Max clamping force: 4,500 N Holding force: 4,700 N Piston diameter: 16 mm Weight: 1.03 kg Thrust spindle: M10 x 70 Special features Mounting: horizontal foot Material: galvanised with cast body Category: Clamp Suitable for workshop and production fixtures FAQ What maximum clamping force does this clamp provide? The clamp reaches a maximum clamping force of 4,500 N; the holding force is specified at 4,700 N for secure fixation. Can the clamp be adjusted for different workpiece heights? Adjustment is provided via the thrust spindle (M10 x 70), allowing fine tuning of contact position and clamping travel. Is the 535 suitable for use in coolant-exposed environments? Yes. The galvanised cast body offers corrosion resistance, making the 535 push-rod clamp appropriate for many workshop conditions. What is the item number to order or reference for procurement? Order or reference by SKU 535-4-Q16-L and the GTIN 8682843521243 for clear identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Push Rod Clamp M10x70 Blackened Finish, 4.65 kN Holding Force - Kukamet
Compact, space-saving design combined with a 4,650 N holding force and an adjustable M10x70 pressure spindle ensures reliable clamping and fewer production interruptions. Order the push-rod clamp directly via Metav Werkzeuge or consult our specialists for application matching. Push-rod clamp 513 (Kukamet) — M10x70 pressure spindle, 4.65 kN holding force The push-rod clamp 513 is a compact rod clamp designed for secure workpiece holding in machining, assembly and fixture applications where quick, repeatable clamping is required Compact rod clamp design Max holding force 4,650 N Pressure spindle M10x70 Blackened burnished finish Secure clamping for repetitive production tasks The 513 delivers consistent clamping through a high holding force of 4,650 N and a maximum pressing force of 4,500 N, reducing the risk of part movement during machining. The mechanical action converts lever motion into axial force, producing reproducible results part after part. This predictability lowers scrap rates and shortens inspection loops, supporting leaner, more efficient workflows. Space-saving integration into jigs and fixtures With a without-base mounting style and a compact footprint, the clamp suits confined fixture designs and modular tooling systems. The M10x70 pressure spindle provides straightforward length adjustment and fine contact control for different workpiece geometries. At approximately 0.78 kg, the unit is light enough for quick handling yet robust enough for fixed installation in production jigs. Built for workshop durability and low maintenance Finished in a blackened burnished surface, the clamp resists corrosion and shows less wear in daily use, maintaining dependable friction behaviour at the contact point. The simple mechanical construction minimises service needs: fewer wear parts and uncomplicated replacement procedures result in lower lifetime maintenance overhead for the workshop. Faster set-up and steady throughput The lever-style push-rod mechanism enables rapid actuation for high-frequency production cycles, shortening cycle times without sacrificing clamping performance. The device’s straightforward operation and robust holding capability support repeatable set-up procedures, helping to keep machines running and reducing downtime between batches. For reliable clamping from Kukamet, request the Push-rod clamp 513 (SKU B513-6) through Metav Werkzeuge for dependable supply from Emmerich — contact Metav consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for technical matching Technical data SKU: B513-6 GTIN: 8680731508772 Manufacturer: Kukamet Facts Max pressing force: 4500 N Max holding force: 4650 N Weight: 0.78 kg Pressure spindle: M10x70 eCl@ss: 21041716 ETIM: EC011973 Designs and special features Finish / material: blackened burnished Mounting style: without base Product type: push-rod clamp (lever-style) Category: clamp FAQ What is the maximum holding force of this clamp? The Kukamet push-rod clamp 513 achieves a maximum holding force of 4,650 N, suited to many standard clamping tasks in production. Which spindle size is fitted for contact adjustment? The unit is equipped with a M10x70 pressure spindle for straightforward length adjustment and precise contact alignment. Is the clamp ready for direct installation in fixtures? Yes, the clamp is supplied without a base, enabling direct integration into modular jigs or custom fixture plates. What finish does the clamp have and why does it matter? The blackened burnished finish provides corrosion resistance and a durable surface that preserves consistent friction behaviour during repeated use. Which SKU and GTIN identify this product? The product is listed as SKU B513-6 with GTIN 8680731508772 for ordering and inventory purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Push Rod Clamp Vertical Foot M10x70, Black Oxide Finish - Kukamet
Take advantage of robust clamping performance and a compact, vertical-foot mounting for stable fixtures; the combination of a 4,650 N holding capacity and a M10 x 70 pressure spindle ensures repeatable results in short-cycle production. Order the push-rod clamp 512 directly via Metav Werkzeuge or ask the consultants if additional data is required. Push-rod clamp 512 — Vertical-foot lever clamp with 4.65 kN holding force (Kukamet) The Push-rod clamp 512 is a compact lever-style clamp designed for reliable workholding in metalworking, fixture construction and assembly applications. Vertical-foot mounting for stable installation Up to 4,650 N holding force 4,500 N clamping force Pressure spindle M10 x 70 Consistent force where it matters The clamp delivers a clamping force of 4,500 N (4.5 kN) and a holding force of 4,650 N (4.65 kN), values that translate into reliable retention of workpieces under dynamic loads. These figures support reduced rework and fewer stoppages because components remain fixed during machining or assembly. The specified forces are especially relevant for repetitive tasks where predictable performance shortens cycle times and improves overall process efficiency. Stable mounting and easy adjustment Equipped with a vertical foot for secure fastening, the unit mounts directly to fixture plates or subbases for compact footprint installations. The integrated pressure spindle M10 x 70 provides fine axial adjustment of the contact point, enabling precise setting of the clamping stroke. At a weight of 1.07 kg, the device is light enough for easy positioning during fixturing while retaining the mechanical robustness required for industrial use. The blackened finish reduces visible wear and contributes to long-term surface integrity in workshop environments. Practical use and compatibility Designed as a lever-style push-rod solution, the item is suitable for fixture builders, jigs and assembly stations where a secure, repeatable clamp action is required. The mechanism supports both short clamp cycles and frequent actuation without complex servicing. Combined with Metav’s distribution and technical support, the product is positioned as a dependable component for small-batch production and high-mix manufacturing, providing the confidence of consistent clamping performance and straightforward integration into existing setups. Contact Metav Werkzeuge for personalised technical advice or to request the Kukamet Push-rod clamp 512 (SKU B512-6) and find the right mounting option for the application. Technical data SKU: B512-6 GTIN: 8680731508734 Designation: Push-rod clamp 512 Manufacturer: Kukamet Core data Clamping force max: 4,500 N Holding force max: 4,650 N Weight: 1.07 kg Pressure spindle: M10 x 70 Design / Special features Vertical foot mounting Blackened finish Lever-style push-rod mechanism eCl@ss: 21041716 ETIM: EC011973 FAQ What are the main force specifications of this clamp? The Push-rod clamp 512 provides a clamping force up to 4,500 N and a holding force up to 4,650 N, offering consistent retention for assembly and machining tasks. How is the clamp mounted to a fixture? Mounting is by a vertical foot; the vertical-foot configuration allows direct fastening to fixture plates or subbases for space-efficient installation. What adjustment is available for contact point positioning? Adjustment is effected via the pressure spindle M10 x 70, which permits fine axial setting of the contact point and accurate stroke alignment. Is the finish suitable for workshop environments? The component is supplied with a blackened finish, which improves surface durability and reduces visible wear in standard workshop conditions. Which industries and applications are typical for this clamp? The clamp is well suited to metalworking fixtures, jigs and assembly lines where repeatable, lever-style clamping is required; it is intended for industrial and trade applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Push Rod Clamp Without Foot, Zinc Plated, M10x70 Spindle – Kukamet
Take advantage of a robust, space-saving clamp with a zinc-plated finish and a secure M10x70 spindle, delivering up to 4,500 N of clamping force and 4,650 N holding capacity for reliable fixture performance; order the 513 push-pull clamp directly via Metav Werkzeuge or consult our specialists for application advice. 513 push-pull clamp — zinc-plated, 4,500 N, M10x70 (Kukamet) The 513 push-pull clamp is a compact rod clamp for jigs and fixtures, engineered to provide a secure clamping action and space-saving mounting without a foot. Compact push-pull clamp design Zinc-plated for corrosion resistance M10x70 spindle for reliable engagement 4,500 N clamping and 4,650 N holding force Efficient clamping for compact fixtures The 513 is designed for fixture builders who need a balance of power and small footprint. With a rated clamping force of 4,500 N and a lightweight body of 0.78 kg, the unit minimises bulk in tight assemblies while maintaining consistent securing power. The compact construction reduces interference in multi-clamp setups and simplifies part access, enabling smoother handling during both short runs and repetitive operations. Built for repeatable action, the clamp supports efficient cycle times in production tooling. Technical reliability and fast engagement A threaded spindle of M10x70 spindle length ensures dependable engagement and straightforward integration into jigs or plates. The difference between the rated push force and holding force (4,650 N) provides a safety margin for static retention after actuation, reducing the risk of workpiece shift during secondary operations. The zinc-plated surface offers baseline corrosion protection for general workshop conditions, contributing to longer service life and lower maintenance frequency for fixtures where space and reliability are priorities. Where this clamp adds value in production This rod clamp is suitable for assembly jigs, small-series production and repair benches where a no-foot, inline clamping solution is required. The low weight and compact profile make the unit appropriate for mobile fixtures and nested tooling plates without compromising industrial clamping performance. Specifying such a component helps standardise fixtures across jobs, shortening setup times and reducing inventory complexity when paired with a consistent supplier strategy. Enquire with Metav Werkzeuge for availability, technical matching and ordering of the Kukamet 513 push-pull clamp — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 513-6 GTIN: 8680731502749 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE Facts Max clamping force: 4,500 N Max holding force: 4,650 N Weight: 0.78 kg eClass: 21041716 ETIM: EC011973 Special features Compact rod clamp Zinc-plated surface finish No foot for space-saving mounting M10x70 spindle for secure engagement SKU: 513-6 FAQ What maximum clamping force does the clamp provide? The Kukamet 513 push-pull clamp delivers a maximum clamping force of 4,500 N and a holding force of 4,650 N (SKU 513-6). Is the finish suitable for standard workshop environments? Yes. The zinc-plated finish on the 513 unit provides basic corrosion resistance suitable for general workshop and industrial conditions; additional coating may be considered for aggressive environments. How is the clamp mounted into a fixture? The clamp is supplied without a foot and is intended for direct integration into fixture plates or tooling blocks; the spindle thread is M10x70 for secure mechanical connection. Is the clamp suitable for mobile or lightweight fixtures? With a weight of 0.78 kg the unit is compact and light enough for mobile jigs and portable fixtures while still offering industrial clamping forces. Can the clamp be used across different production stages? The clamp is intended for fixture and jig assembly; its combination of compact size and reliable force makes it suitable for positioning, holding and light machining support within a production sequence. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Pushrod Clamp Horizontal Foot Zinc-Plated, 1.07 kg - Kukamet
The galvanised construction combined with a defined 4.5 kN clamping force and a compact 1.07 kg body ensures reliable, repeatable holding in workshop and production environments; order directly via Metav Werkzeuge or contact their consultants for specification advice. 511 Rod Clamp – Kukamet push-rod lever clamp, galvanised, 4.5 kN The 511 Rod Clamp is a horizontal-foot push-rod lever clamp designed for secure, repeatable workholding in general workshop and light industrial applications Galvanised steel finish for corrosion protection 4.5 kN clamping force for secure fixing Horizontal-foot mounting for stable installation M10×70 pressure spindle for fine adjustment Secure clamping where it matters The 511 delivers a defined 4.5 kN clamping force with a maximum holding force of 4.65 kN, giving a clear, verifiable basis for selecting the right clamp for repetitive operations. Clamping force refers to the active force applied by the lever mechanism to press a workpiece in position, while holding force indicates resistance to displacement once clamped; together they reduce rework and downtime. The galvanised finish supports long-term use in mixed environments by resisting surface corrosion. Flexible mounting and straightforward adjustment A horizontal foot simplifies installation on flat fixtures or machine beds, enabling stable positioning without additional brackets. The integrated M10×70 pressure spindle allows precise adjustment of clamping height and contact pressure, making it suitable for varied part geometries. At 1.07 kg, the clamp combines portability with mechanical strength, facilitating fast fixture changes and reducing handling effort during setup. Durable design for everyday workshop use Constructed from galvanised steel and operated via a robust lever mechanism, this push-rod type clamp supports frequent cycles with minimal maintenance. The clear mechanical design means inspections and replacements are straightforward, helping maintain production continuity. For combination jigs and small fixtures the clamp provides predictable performance, contributing to efficient workflows and consistent part quality. For reliable clamping solutions from Kukamet, contact Metav Werkzeuge to discuss the 511 rod clamp and integration options; Metav’s consultants can advise on mounting, quantities and delivery from their Emmerich quality hub. Technical data Article number: 511-6 GTIN: 8680731502640 Manufacturer: Kukamet SKU: 511-6 Facts Weight: 1.07 kg Clamping force (max): 4,500 N Holding force (max): 4,650 N Pressure spindle: M10×70 eCl@ss: 21041716 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Type: push-rod lever clamp No special features indicated FAQ What is the maximum clamping force of this clamp? The maximum clamping force is 4,500 N; the Kukamet 511 rod clamp (SKU 511-6) provides a reliable 4.5 kN for secure workholding. Can the clamp be mounted on a machine bed? Yes, the horizontal-foot design permits stable mounting on flat beds and fixtures for machine or bench installations. Is the spindle adjustable for different part heights? The M10×70 pressure spindle on the 511 enables fine adjustment of contact height and pressure for varied workpiece geometries. How resistant is the clamp to corrosion? The device is made from galvanised steel, offering corrosion resistance suitable for general workshop environments and reducing surface wear. Is the clamp suitable for repetitive production use? Yes, the lever mechanism and defined clamping/holding forces make the Kukamet 511 suitable for repetitive cycles with low maintenance requirements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Pushrod Clamp Horizontal Foot, 18 mm Piston, 7.2 kN Holding Force, Zinc-Plated - Kukamet
Take advantage of the combination of strong clamping force, compact zinc‑plated construction and straightforward horizontal‑foot mounting for dependable workshop operation; order the clamp directly via Metav Werkzeuge or ask our consultants for further guidance. 521 push-rod clamp by Kukamet — 4,500 N pressing force, zinc‑plated The 521 is a compact push‑rod clamp designed for workshop and light production clamping, equipped with a horizontal foot for stable attachment and precise pressure control 4,500 N maximum pressing force 7,200 N holding force Zinc‑plated corrosion resistance Horizontal‑foot mounting for stability Consistent clamping power for repetitive tasks The clamp delivers a clear performance profile: a maximum pressing force of 4,500 N and a holding force of 7,200 N, which together provide secure retention for many standard fixturing operations. These figures indicate how much force the device applies during engagement and how much load it can reliably hold once set. For processes that require repeated, consistent clamping — for example assembly jigs or fixture workpieces in a small production run — the combination of pressing and holding force reduces slippage and rework, improving throughput and repeatability. Durable finish and compact footprint reduce downtime A zinc‑plated finish protects contact surfaces against corrosion, extending service life in workshop environments where humidity or coolant exposure can otherwise accelerate wear. The unit’s compact design and 0.825 kg mass make it simple to integrate into existing fixtures without adding unnecessary bulk or weight. The horizontal foot mounting arrangement supports low‑profile installation on plates and beams, saving vertical space while providing a stable basis for repeated clamp engagement. Simple integration and precise adjustment Adjustment is effected through the M10x70 pressure spindle, a standard metric thread and length that permits straightforward matching with common fixtures and replacement parts. The clamp uses an 18 mm piston diameter, which determines the active clamping area and the force transmission characteristics; a larger piston diameter typically yields smoother force delivery with less spindle travel. These features mean the device can be incorporated into jigs with predictable behaviour and minimal bespoke machining, lowering integration effort and easing maintenance. Practical workshop applications and efficiency gains The unit suits routine clamping tasks in workshops, on benches and in light assembly lines where reliable, repeatable holding is required. Its robust holding capacity supports secure fixturing of small to medium components, while the zinc‑plated surface reduces the need for frequent replacement. By standardising on compact, metric‑threaded clamps with known force values, process planners can simplify parts lists and speed setup times, contributing to leaner workflows and fewer stoppages due to loose workpieces. For secure, workshop‑ready clamping with Kukamet reliability, contact Metav Werkzeuge in Emmerich to discuss the 521 push‑rod clamp and its fit for specific fixtures or production tasks Technical data Article number: 521-4-Q18 GTIN: 8680731502787 Manufacturer: Kukamet Facts Max pressing force: 4,500 N Max holding force: 7,200 N Piston diameter: 18 mm Pressure spindle: M10x70 Weight: 0.825 kg ECLASS: 21041716 ETIM: EC011973 Design & special features Mounting: horizontal foot Finish: zinc‑plated Category: Spanner Image: 521-main.jpg FAQ What clamping and holding forces does this clamp offer? The Kukamet 521 push‑rod clamp provides a maximum pressing force of 4,500 N and a holding force of 7,200 N, values suited to many bench and light production fixturing tasks. How is the clamp mounted and adjusted? Mounting is via a horizontal foot; adjustment of clamping pressure is made using the M10x70 pressure spindle supplied with the unit. Is the finish resistant to workshop conditions? The zinc‑plated finish on the 521 offers corrosion resistance appropriate for typical workshop environments, helping to prolong service life under normal use. What does the piston diameter mean for performance? An 18 mm piston diameter governs the area over which clamping force is applied, affecting how force is transmitted and how smoothly the clamp operates during engagement. Which tasks is this clamp typically used for? Common applications include fixture and jig clamping in small production runs, assembly tasks and general workshop fixturing where compact, repeatable holding is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Vertical Clamp With Safety Lock, Zinc Plated, 1.54 kg - Kukamet
Take advantage of a compact clamp that combines reliable 5,000 N holding force, secure operation through a mechanical safety lock and a zinc-plated finish for long service life. Order this vertical toggle clamp directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertical toggle clamp 212 by Kukamet — zinc-plated with safety lock The 212 vertical toggle clamp is a compact clamping solution for vertical fixturing tasks in production, assembly and jig applications, designed for secure and repeatable workholding under frequent use. Zinc-plated for corrosion resistance Integrated safety lock for secure holding 5,000 N maximum holding force Vertical base for stable mounting Reliable clamping that keeps production moving The 212 delivers consistent clamping through a robust toggle mechanism that converts operator action into high clamping performance. With a holding force of 5,000 N and a clamping force of 4,500 N, the device secures workpieces reliably during machining, welding or assembly operations. The combination of compact dimensions and substantial force reduces rework and increases throughput, making it suitable for repetitive industrial tasks where stable fixation is essential. Fast, safe operation for busy production lines A built-in safety lock prevents accidental release under vibration or when the clamp remains under load, enhancing workplace safety and process stability. The latch engages automatically to hold the lever in position once closed, so operators benefit from a straightforward mechanical safeguard without additional components. This feature supports safer workflows and lowers the risk of damage to parts or tools, contributing to more predictable cycle times. Easy integration with existing fixtures and machines Mounting is simplified by the vertical base configuration and the standard M12×80 spindle, enabling direct attachment to benches, jigs or machine tables without complex adaptation. The zinc-plated steel construction offers a balance between durability and weight: at approx. 1.54 kg, the clamp is light enough for flexible fixture design yet robust enough for daily industrial use. Its compact form factor assists in tight layouts where space is limited. Low-maintenance build that saves operational time Surface protection and straightforward mechanics keep upkeep minimal: regular inspection and light lubrication are sufficient to maintain precise function over time. The zinc-plated finish resists corrosion in typical workshop environments, while the mechanical components are designed for long service intervals. Choosing this clamp reduces downtime for maintenance and supports continuous production with minimal intervention. For reliable, space-saving workholding choose the Kukamet 212 vertical toggle clamp — contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 212-5-L GTIN: 8680731501834 eCl@ss: 21041717 ETIM: EC011973 Facts Weight: 1.54 kg Holding force max: 5,000 N Clamping force max: 4,500 N Spindle thread: M12×80 Special features Material: zinc-plated Fastening: vertical base Safety lock SKU: 212-5-L Manufacturer: Kukamet FAQ What maximum holding force does the clamp provide? The clamp offers a maximum holding force of 5,000 N, which ensures secure fixation for general assembly and machining applications with the 212 vertical toggle clamp from Kukamet. How is the clamp mounted to a fixture or workbench? Mounting is carried out via the vertical base; the clamp includes an M12×80 spindle interface for straightforward attachment to jigs, benches or machine tables. Does the clamp include a locking mechanism for safety? Yes, the 212 features an integrated safety lock that secures the lever in the closed position to prevent accidental release under load. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Closure Clamp Horizontal Foot With Metal Handle, Hook, 2,000N Thrust / 2,500N Hold - Kukamet
Taking advantage of stainless steel construction and a 2,500 N holding force, this toggle latch clamp delivers secure, corrosion-resistant fastening with a compact footprint and a horizontal mounting base. The robust metal handle and integrated hook enable reliable repetitive clamping in production and jigging. Order the toggle latch clamp 361 directly via Metav Werkzeuge or ask our consultants if needed. Toggle latch clamp 361 — stainless-steel latch with hook, 2,500 N holding force (Kukamet) A Toggle latch clamp 361 for secure fastening in assembly, fixtures and transport applications, featuring a horizontal base for stable mounting and a durable metal handle Corrosion-resistant stainless steel construction Horizontal base for stable mounting Metal handle for long service life Holding force up to 2,500 N Consistent, measurable clamping for production use The clamp provides a repeatable clamping action that supports efficient handling in serial production. With a clamping force of 2,000 N and a holding force of 2,500 N, the device secures parts under load and reduces rework caused by shifting components. The compact design and the horizontal base enable simple integration into jigs and fixtures, while the hook ensures positive engagement. Technical values are deliberately stated to support decisions based on performance rather than opinion. Built to withstand workshop conditions and reduce downtime Made from stainless steel, the latch resists corrosion in damp or chemically exposed environments, extending service intervals and lowering life-cycle costs. The metal handle is engineered for repeated actuation and tactile feedback, so operators benefit from a smooth, confident locking movement. Where durability matters, the material choice reduces the need for frequent replacement and preserves alignment in long-term fixtures. Easy to fit and adjust within existing assemblies The unit includes a 40 mm thread length for secure fastening and flexible positioning when mounting to benches or subframes. The compact mass of 0.25 kg keeps added weight to a minimum on moving fixtures. As a toggle-style latch with an integrated hook, it simplifies clamping loops and reduces the number of components needed in a fixture layout. Clear numerical data enables planners to match the latch to load requirements and mounting constraints. For robust fastening in production environments, request the Kukamet toggle latch clamp 361 via Metav Werkzeuge for a reliable combination of corrosion resistance and high holding force — Metav Werkzeuge can advise on suitability for specific fixtures and supply from stock Technical data Article number: S361-3 GTIN: 8682843523377 eClass: 21041718 ETIM: EC011973 Facts Weight: 0.25 kg Clamping force (max): 2,000 N Holding force (max): 2,500 N Thread length: 40 mm Special features Material: stainless steel Mounting: horizontal base Handle: metal Feature: integrated hook Category: clamp / toggle latch FAQ How much holding force does the clamp provide? The Kukamet toggle latch clamp 361 delivers a holding force of up to 2,500 N, with a maximum clamping (pressing) force of 2,000 N. Is the latch suitable for corrosive or moist environments? Yes; the clamp is manufactured from stainless steel, which provides corrosion resistance suitable for damp workshop conditions. Can the latch be mounted to existing jigs and fixtures? The latch features a horizontal base and a 40 mm thread length, allowing straightforward mounting into existing fixture plates and subframes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Short Striking Rod Clamp Size 3, M8 x 35 Actuator, 2.5 kN Holding Force - AMF
Take advantage of a compact, short-bodied clamping solution that combines a 2500 N clamping force with a 40 mm stroke for reliable fixture in restricted spaces; order directly via Metav Werkzeuge or ask our consultants for compatibility advice. AMF Pushrod clamp No. 6844 (Size 3) — short design, 2500 N clamping force AMF Pushrod clamp No. 6844 is a compact pushrod clamp designed for reliable clamping in confined machine and assembly environments Short design for compact installations Push force up to 2500 N 40 mm stroke for secure engagement Actuation screw M8 x 35 Minimise setup time with compact, powerful clamping The compact short design delivers a high clamping force in a small envelope, making it suitable for fixtures where space is at a premium. With a maximum holding and pressing force of 2500 N and a 40 mm stroke, this clamp enables fast, repeatable locking of workpieces while reducing interference with adjacent tooling. The combination of high force and reduced footprint helps to maintain production flow and reduce cycle interruptions without sacrificing grip strength. Straightforward integration and clear technical interfaces Designed for easy assembly into existing fixtures, the clamping unit features an M8 x 35 actuation screw and an M20x1.5 thread for secure mounting. Key dimensions such as H1 123 mm, L1 108 mm, A 12 mm and B 57 mm provide predictable clearances for layout planning. The plunger stroke and mounting threads are specified to industry conventions, which simplifies retrofitting and minimises engineering time. For less experienced users, this clear specification set reduces uncertainty during installation and commissioning. Reliable performance in repetitive production environments Built for repeated cycles, the device shows consistent holding characteristics suitable for assembly, jigs and light machining tasks. The robust actuation geometry and defined HW range 22–35 mm ensure secure contact and predictable behaviour under load. Where process stability is essential, this clamp contributes to lower scrap rates and improved throughput thanks to predictable positioning and dependable engagement. The product’s mechanical simplicity supports ease of maintenance and long service intervals. For sourcing, technical match or delivery from Emmerich, contact Metav Werkzeuge—our consultants will advise on application fit and supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4123665300NW Type: 6844 Product name: AMF Pushrod clamp No. 6844 Size 3 short Brand: AMF Packaging unit: 1 Facts Maximum pressing force: 2500 N Maximum holding force: 2500 N Stroke (Hub): 40 mm H1: 123 mm L1: 108 mm L3: 115 mm A: 12 mm B: 57 mm E: 25 mm HW min.: 22 mm HW max.: 35 mm L2: 16 mm N: 33 mm Actuation screw: M8 x 35 Thread M2: M20x1,5 Special features Short form construction for tight spaces Actuation via M8 x 35 screw Defined mounting and interface dimensions for simple integration Suitable for fixtures, jigs and assembly applications FAQ What is the maximum clamping force of the AMF Pushrod clamp No. 6844? The maximum pressing and holding force of the AMF Pushrod clamp No. 6844 (SKU 4123665300NW) is 2500 N. Which stroke length does this clamp offer and how does it affect application? The unit provides a 40 mm stroke, which allows for secure engagement with variable workpiece heights while maintaining a compact assembly footprint. What mounting interfaces are available for integration? The clamp uses an M8 x 35 actuation screw and includes an M20x1.5 threaded interface for mounting and actuation connection, simplifying integration into existing jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Toggle Clamp Horizontal Foot With Metal Handle, 2,000N Closing Force, Galvanised - Kukamet
Take advantage of galvanised construction and compact dimensions combined with a reliable 2,000 N clamping action and 2,500 N holding capability for secure, repeatable fixtures; order the 361 toggle latch clamp from Metav Werkzeuge or consult our specialists for application advice. 361 toggle latch clamp — Kukamet horizontal-base toggle latch with galvanised finish and metal grip A 361 toggle latch clamp for quick, secure fastening in workholding and fixture applications, offering a horizontal base for flush mounting and a hooked latch for positive engagement Galvanised steel for corrosion resistance Horizontal base for flush mounting Metal grip for robust handling 2,500 N holding force for secure locking Reliable clamping for repeatable fixtures The 361 toggle latch clamp delivers consistent clamping force and secure locking where repeatability matters. With a rated 2,000 N clamping action and 2,500 N holding force, the device provides defined restraint for jigs, fixtures and access panels, reducing rework and setup time. The clear numerical ratings allow planners to calculate safety margins and cycle loads, supporting a predictable production flow and minimising downtime. Durable design built for workshop environments Constructed from galvanised material with a metal grip, this clamp resists corrosion and stands up to everyday workshop use. The compact unit weighs 0.25 kg and features a hooked latch for reliable engagement under vibration. The robust handle offers comfortable actuation while maintaining mechanical longevity, so maintenance cycles are extended and replacement intervals are reduced, supporting cost-effective operation. Practical mounting and application advantages A horizontal base with a threaded engagement length of 40 mm enables flush mounting on plates, frames and fixtures where space is limited. The toggle mechanism provides quick-action locking that shortens handling times during assembly or clamping operations. Given its straightforward mounting and positive-lock hook, the component is suitable for repetitive securing tasks in manufacturing cells and maintenance jigs, improving handling efficiency. Trusted supply and service from Metav for industrial needs Sourcing Kukamet components through Metav adds logistical and quality assurance benefits: central supply from Emmerich, defined stock handling and a broad range of complementary workholding items. The combination of a proven toggle design and a dependable distribution partner supports continuous production and simplifies procurement, offering both technical reliability and supply-chain confidence. Choose the Kukamet 361 toggle latch clamp for robust, repeatable clamping and source it directly via Metav Werkzeuge for fast, dependable delivery from Emmerich — contact Metav at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical Data SKU: 361-3 GTIN: 8680731509984 Manufacturer: Kukamet Model: 361 Weight: 0.25 kg Core data Max clamping force: 2,000 N Max holding force: 2,500 N Thread length: 40 mm Design / Special features Material: galvanised steel Mounting: horizontal base Metal grip With hook Category: toggle latch clamp eClass: 21041718 ETIM: EC011973 FAQ What is the maximum clamping force of this toggle latch? The Kukamet 361 toggle latch clamp provides a maximum clamping force of 2,000 N and a holding force rated to 2,500 N for secure fastening. Can the clamp be mounted flush to a workpiece? Yes, the clamp uses a horizontal base designed for flush mounting; the threaded engagement of 40 mm facilitates stable installation in fixture plates. Is the 361 suitable for use in humid or corrosive environments? The 361 is made from galvanised steel and includes a metal grip, offering increased corrosion resistance suitable for standard workshop and light industrial conditions. What applications suit this type of latch clamp? This toggle latch clamp is suitable for jigs, fixtures, access panels and repetitive securing tasks where rapid locking and reliable holding are required. How is the 361 supplied and who distributes it? The Kukamet 361 toggle latch clamp (SKU 361-3) is distributed via Metav Werkzeuge, ensuring centralised stock and consistent supply for industrial buyers. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
41mm Closure Clamp Horizontal Foot With Hook, 2,000N Thrust / 2,500N Hold - Kukamet
Take advantage of robust clamping performance combined with a compact design and reliable surface treatment for consistent fixture results; the clamp delivers 2,000 N of clamping force and a 2,500 N holding capacity. Order the part directly via Metav Werkzeuge or contact our consultants for specification support. Toggle latch clamp 421 by Kukamet — horizontal base, 2,000 N clamping force A practical Toggle latch clamp 421 designed for secure horizontal mounting and medium-duty fixture applications in workshops and production cells. Horizontal mounting with flat base Max clamping force 2,000 N Holding force up to 2,500 N Blackened finish with hook included Consistent clamping force for repeatable production The latch provides a dependable 2,000 N clamping force with a 2,500 N holding capacity that supports repeatable fixture cycles. Its mechanical toggle action converts operator input into a stable clamping result, reducing variability in assembly and machining tasks. The compact construction keeps the closure compact on jigs while the low weight of 0.32 kg minimises added mass on moving fixtures. Such consistent mechanical performance improves process throughput and reduces rework. Secure horizontal mounting that improves accessibility Designed with a horizontal base, the clamp installs neatly onto flat fixture plates or subframes, offering unobstructed access from above. The mounting arrangement simplifies alignment in dedicated jigs and enables a low-profile fit that helps maintain tool clearance. The thread length 41 mm allows fine adjustment of the clamping point, making the latch adaptable to varying workpiece heights without modifying the fixture layout. Durable surface and integrated hook for long service life A blackened finish provides basic corrosion resistance and a professional appearance suitable for workshop environments. The integrated hook ensures a positive closure and reduces the risk of accidental release in vibration-prone processes. Together these design choices contribute to sustained functionality in repetitive applications while keeping maintenance straightforward — periodic inspection and light lubrication are normally sufficient to maintain smooth operation. Clear specification for straightforward integration The clamp’s compact footprint and measurable figures make it simple to specify for fixtures and production jigs. With a distinct mechanical function and clearly stated performance values, the component can be compared objectively when engineering fixture hardware. The model is supplied under SKU B421-3 by Kukamet, facilitating procurement and traceability for inventory and ordering systems. For secure, repeatable clamping from Kukamet, contact Metav Werkzeuge to request product details or procurement assistance — Metav Werkzeuge supplies directly from Emmerich and can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: B421-3 GTIN: 8680731508673 Model: 421 Manufacturer: Kukamet Performance figures Max clamping force: 2,000 N Holding force: 2,500 N Thread length: 41 mm Weight: 0.32 kg Features & materials Horizontal foot mounting Blackened finish Hook included ECLASS: 21041718 ETIM: EC011973 FAQ What clamping and holding forces does the latch provide? The latch achieves a clamping force of 2,000 N and a holding capacity of 2,500 N, suitable for medium-duty fixture applications with stable toggle action. Is the clamp suitable for horizontal mounting on jig plates? Yes, the clamp features a horizontal base designed for mounting on flat plates and subframes, enabling a low-profile installation on jigs. How is the clamping point adjusted? Adjustment is provided via the threaded spindle with a thread length of 41 mm, allowing fine tuning of the clamping position to accommodate different workpiece heights. What surface treatment and anti-corrosion measure are applied? The unit is supplied with a blackened finish, offering basic corrosion protection and a durable appearance for workshop use. Which manufacturer and SKU identify this part? This item is supplied by Kukamet and is listed under SKU B421-3, which assists with procurement and inventory management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
44mm Vertical Clamp 750N Closing Force, Zinc Plated Massive Arm, Horizontal Base - Kukamet
Taking advantage of a massive holding arm, compact 44 mm clamping reach and a galvanised finish, this vertical clamp delivers dependable workpiece retention for light to medium-duty fixtures; order directly via Metav Werkzeuge or consult our specialists for application advice. 211 vertical clamp — Kukamet vertical clamp with 44 mm arm and galvanised finish The 211 vertical clamp is a compact vertical clamping solution for jigs, fixtures and light assembly stations that requires a horizontal-foot mounting for secure installation. Massive holding arm design 44 mm clamping arm for compact fixtures Galvanised corrosion protection Horizontal-foot mounting for stable installation Consistent retention for repetitive production The clamp provides a clear operating window between holding and applied force: holding force 1,000 N and clamping force 750 N. These figures indicate the maximum static retention and the maximum applied pressing capacity respectively, ensuring stable fixation during machining, welding or assembly operations. Defined numerical values support process planning and allow integration into fixtures where reliable, repeatable clamping is required. The performance data reduces setup variability and supports efficient cycle times. Compact form with durable components for long service life With a 44 mm arm and a massive holding arm, the design focuses on compactness without sacrificing rigidity. The component is finished galvanised, providing a corrosion-resistant surface suitable for workshop environments. A horizontal-foot mounting offers a low-profile attachment that simplifies alignment on plates and bases. Material choice and construction minimise deformation under load, which in turn maintains positional accuracy across repeated cycles and prolongs tool life. Practical fit for fixtures, jigs and assembly benches The product is intended for use in workholding assemblies where space is limited and a vertical clamping action is required. The compact geometry and horizontal base make it suitable for welded or bolted fixture plates in production cells and test rigs. The simple lever-inspired mechanism enables quick engagement in manual operations and stable retention during automated processes. Specification-driven selection helps planners choose the correct clamping element for the application. Low-maintenance operation and straightforward integration Routine upkeep is limited to visual checks and occasional lubrication of moving pivots; the zinc finish reduces the need for intensive corrosion control. The robust construction reduces susceptibility to wear and supports long intervals between servicing. Where full compatibility checks are required, technical details such as SKU: 211-1-D-C1 and the supplied force data support CAD integration and procurement workflows. For reliable, compact clamping from Kukamet with clear force specifications, contact Metav Werkzeuge to discuss integration and secure supply directly from Emmerich. Technical data SKU: 211-1-D-C1 GTIN: 8680731505795 Manufacturer: Kukamet Facts Arm: 44 mm Weight: 0.138 kg Holding force max: 1,000 N Clamping force max: 750 N eClass: 21041717 ETIM: EC011973 Special features Galvanised finish Horizontal-foot mounting Massive holding arm Category: Spanner Story trigger: lever clamp FAQ What maximum retention does the clamp provide? The clamp offers a maximum holding force of 1,000 N; the clamping (pressing) capacity is 750 N for the Kukamet vertical clamp SKU 211-1-D-C1. Can the clamp be mounted on a fixture plate? Yes, the horizontal-foot mounting is designed for bolting or welding onto fixture plates and bases for stable installation. Is the clamp suitable for outdoor or corrosive environments? The component is galvanised, which improves corrosion resistance compared with an uncoated part; further protection is advised for aggressive environments. How compact is the clamp for tight assemblies? The 44 mm arm provides a short reach, allowing integration into compact jigs and assembly fixtures where space is limited. What routine maintenance is required? Maintenance is limited to periodic visual inspection and lubrication of pivots; the robust design and galvanised finish reduce maintenance frequency. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
44mm Vertical Clamp 750N Thrust, 1000N Hold Force, Zinc Plated, Horizontal Base, Heavy Arm Safety Lock - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a galvanised body with a massive holding arm and a secure safety lock, ensuring reliable fixation under daily workshop stresses. Order the unit directly via Metav Werkzeuge or consult the Metav team for specification support and supply assurance. Vertical clamp 211 — Kukamet lever clamp with 44 mm arm and safety lock A robust vertical clamping solution designed for fixture and jigs, the Vertical clamp 211 secures components with precise holding characteristics and a space-saving horizontal base. Massive holding arm with safety lock 44 mm arm for secure positioning Galvanised finish for corrosion resistance 1,000 N hold, 750 N clamp capacity Precise holding and measurable performance for production tasks Constructed to deliver dependable fixation, this vertical clamp offers clearly specified forces: a 1,000 N holding force and a 750 N clamping force, values that translate directly into predictable behaviour on the shop floor. The rated forces allow straightforward calculation of clamping layouts and fixture safety factors, so planners and engineers can select the right clamp without guesswork. The galvanised surface reduces maintenance in humid environments, while the low mass supports quick manual handling. Practical mounting and safe operation in confined setups Fitted with a horizontal foot for stable attachment to plates and rails, the device features a 44 mm arm that positions the workpiece reliably beneath the lever action. The massive holding arm design minimises bending and wear under repeated cycles, and the integrated safety lock prevents accidental release during secondary operations. These attributes make the clamp suited to repetitive jigs, assembly fixtures and light machining setups where operator safety and cycle stability are priorities. Compact, workshop-ready design backed by a reliable supply chain At just 0.155 kg, the clamp remains simple to incorporate into modular fixture systems without adding unnecessary bulk. The lever-style actuation gives immediate tactile feedback during engagement, useful for assembly technicians and machine operatives who require rapid, repeatable clamping. Supplied as a galvanised steel unit, the component matches well with common shop materials and benefits from Metav’s quality filter and central European distribution, helping procurement managers reduce supplier overhead while keeping access to spare parts and replacements straightforward. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertical clamp 211 into fixtures and for secure delivery from Emmerich to the workshop bench Technical data Article number: 211-1-D-L-C1 GTIN: 8680731509953 eClass: 21041717 ETIM: EC011973 Facts Arm: 44 mm Weight: 0.155 kg Holding force: 1,000 N Clamping force: 750 N Special features Material: Galvanised Mounting: Horizontal foot Massive holding arm Safety lock Category: Clamp (Spanner) FAQ What clamping and holding forces does the clamp provide? The Kukamet Vertical clamp 211 offers a 750 N clamping force and a 1,000 N holding force, enabling reliable fixation for light to medium-duty fixtures. How is the clamp mounted to a fixture plate? The clamp is designed for a horizontal foot mounting, allowing secure bolting to plates, rails or modular tooling systems. Is the clamp suitable for humid or corrosive workshop environments? Yes, the unit is made from galvanised steel, providing enhanced resistance to surface corrosion in typical workshop atmospheres. What benefits does the 44 mm arm provide in practical use? The 44 mm arm gives repeatable positioning and clearance for common workpiece profiles, reducing interference during secondary operations. Which applications fit this lever clamp best? Typical uses include assembly jigs, fixture securing and low-volume machining setups where a compact, manually operated lever clamp is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
44mm Vertical Clamp 750N Thrust, Massive Arm With Safety Lock, Zinc-Plated - Kukamet
The combination of a galvanised finish, a 44 mm arm and a secure safety lock provides reliable, low‑maintenance clamping for light workshop fixtures; the compact design with a 125 g body supports fast integration into assembly jigs. Order the clamp directly via Metav Werkzeuge or consult the technical team for specification matching. Vertikalspanner 212 — Compact vertical clamp with 44 mm arm and safety lock (Kukamet) The Vertikalspanner 212 is a compact vertical clamp designed for secure holding in light‑duty fixtures and jigs, offering corrosion‑resistant construction and simple vertical foot mounting. Galvanised finish for corrosion resistance 44 mm arm for compact clamping Safety lock for secure holding Up to 750 N clamping force Stable clamping that improves process reliability The clamp delivers consistent holding through a massive holding arm and defined force ratings: 750 N clamping force and 1000 N holding force. These quantified values allow planners to calculate fixture load limits precisely and reduce rework caused by component movement. The galvanised construction helps maintain repeatable performance in mixed workshop environments, lowering the need for frequent replacement and contributing to continuous production uptime. Safe operation and easy integration into fixtures A safety lock prevents unintentional release during operation, enhancing workplace safety in assembly and test setups. The device is supplied with a vertical foot mounting, which simplifies attachment to vertical plates or tooling blocks and reduces assembly time. Weighing only 125 g, the clamp adds minimal mass to moving subassemblies, making it suitable for compact jigs and applications where space and weight are constrained. Low maintenance design for long service life The galvanised surface finish resists corrosion and keeps maintenance requirements low, while the robust arm construction stands up to frequent actuation. For users seeking a compact clamping solution within clamping technology and fixture construction, this model offers a balance of durability and compactness without complex adjustments. Clear technical ratings and a standardised mounting style support straightforward replacement and modular fixture design. Contact Metav Werkzeuge in Emmerich for a technical quote or integration advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss how the Kukamet Vertikalspanner 212 fits specific fixture requirements Technical data SKU: 212-1-D-L-C1 GTIN: 8682843520284 eClass: 21041717 ETIM: EC011973 Facts Arm length: 44 mm Clamping force (max): 750 N Holding force (max): 1000 N Weight: 0.125 kg Materials and special features Galvanised steel Vertical foot mounting Massive holding arm Safety lock Category: Clamp (Spanner) FAQ What maximum clamping force does the clamp provide? The Kukamet Vertikalspanner 212 specifies a maximum clamping force of 750 N and a maximum holding force of 1000 N. Is the clamp suitable for environments prone to corrosion? Yes, the galvanised finish on the Vertikalspanner 212 increases resistance to corrosion and reduces maintenance frequency. How is the clamp mounted in a fixture? The device uses a vertical foot mounting which allows attachment to vertical plates or tooling blocks for quick integration into jigs. What is the arm length and why does it matter? The arm length is 44 mm, a compact size that suits tight fixture spaces and helps position clamping force close to the workpiece. Can the clamp be used in modular fixture systems? Designed for clamping technology and fixture construction, the Vertikalspanner 212 is suited to modular jigs thanks to its standard mounting and compact form Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
44mm Vertical Clamp Heavy-Duty Arm, 750N Thrust, 1000N Hold Force, Blackened Finish - Kukamet
Take advantage of the combination of compact dimensions, robust holding force and a massive holding arm for secure, repeatable clamping in fixtures and benches. Order the vertical clamp directly via Metav Werkzeuge or consult the team for specification support. Vertical clamp 212 – compact vertical clamp with 44 mm arm and 1,000 N holding force (Kukamet) A Vertical clamp 212 is a compact lever-style clamping device intended for secure workpiece retention in workshop fixtures and light assembly applications. Massive holding arm for secure clamping 44 mm arm for compact clamping reach Holding force up to 1,000 N Vertical-foot mounting for bench or fixture Reliable clamping performance that fits tight setups The lever-style clamping mechanism delivers consistent holding force with a maximum specification of 1,000 N, while the device offers a separate pressing force rating of 750 N for controlled engagement. The compact 44 mm arm reduces obstruction in dense assemblies and allows positioning close to the workpiece, which supports shorter cycle times and fewer interference issues in jig and fixture layouts. The combination of measurable force ratings and a straightforward mechanical design provides a clear basis for selecting this clamping device where predictable retention and fast operation are required. Built for durability and easy integration Constructed with a blackened finish and a massive holding arm, the clamp is designed to resist surface wear and to maintain grip under repeated use. At 0.138 kg the unit is lightweight enough for modular fixture assemblies yet substantial where rigidity matters. The vertical-foot mounting enables direct attachment to benches, plates or subplates without additional adapters, reducing setup time. The lever-clamp arrangement simplifies manual operation and is suitable for repetitive tasks where quick engagement and release support workflow efficiency. Practical advantages for workshop and small-batch production This compact clamping device supports a pragmatic approach to precision: a straightforward mechanical design paired with clear technical data reduces sourcing uncertainty and helps integrate the component into existing workholding layouts. The robust arm and defined force ratings contribute to repeatable positioning and safer handling of workpieces. For procurement and technical questions, the supplier offers guidance to ensure the component matches the fixture design and expected load cases, helping to avoid trial-and-error on the shop floor and to speed up implementation. Choose the Kukamet vertical clamp 212 for robust, compact holding; contact Metav Werkzeuge for tailored advice and procurement at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: B212-1-D-C1 GTIN: 8680731507829 eClass: 21041717 ETIM: EC011973 Facts Arm length: 44 mm Holding force: 1,000 N Pressing force (max): 750 N Weight: 0.138 kg Special features Blackened finish Massive holding arm Vertical-foot mounting Lever-clamp design FAQ What holding capacity does this clamp provide? The Vertical clamp 212 provides a holding force of up to 1,000 N and a pressing force rated at 750 N for controlled engagement. Can the clamp be mounted directly to a bench or fixture plate? Yes, the device uses a vertical-foot mounting that allows the Vertical clamp 212 to be fastened directly to bench tops, subplates or fixture assemblies. What is the arm reach and how does that affect installation? The clamp features a 44 mm arm, which keeps the profile compact and reduces interference in tightly packed fixtures while maintaining practical reach to the workpiece. Is the finish suitable for repetitive industrial use? The clamp is supplied with a blackened finish and a massive holding arm, which together enhance surface durability for repeated manual operation. What is the product identification for ordering or reference? Reference the Vertical clamp 212 (Kukamet), SKU B212-1-D-C1, when enquiring or ordering to ensure accurate matching of the component. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
44mm Vertical Clamp Three-Point Massive Holding Arm, 750N Clamping Force 1000N Holding Force - Kukamet
Robust clamping with a massive holding arm and up to 1,000 N of holding force delivers secure vertical fixturing while remaining light at just 0.138 kg; the compact 44 mm reach keeps setups space-efficient. Order the clamp directly via Metav Werkzeuge or consult our advisors for specification support. Vertical clamp 211 — compact lever clamp with 44 mm arm and 1,000 N holding force (Kukamet) The Vertical clamp 211 is a compact lever clamp engineered for vertical holding tasks in machining and assembly, designed for secure fixtures where space and reliable clamping force matter. Massive holding arm 44 mm arm reach 1,000 N holding force Horizontal foot mounting Secure holding for machining and assembly The lever-style design provides reliable clamping by separating the actuation and holding forces: an actuation or pressing force of 750 N produces a maximum holding force of 1,000 N, reducing slippage under load. The robust construction with a massive holding arm improves load distribution across the fixture, which is especially beneficial in repetitive production environments and short-cycle assembly processes. For those less familiar with these terms, actuation force describes the input at the lever, while holding force is the retained clamping capability once engaged — a decisive factor for process stability. Compact footprint that streamlines production layouts With a 44 mm arm and a total mass of 0.138 kg, this clamp keeps the work area uncluttered and minimises additional fixture weight. The horizontal foot mounting enables low-profile installation on fixture plates or subplates, saving vertical space in stacked jigs or multi-level workstations. The blackened finish gives corrosion resistance and a professional appearance suitable for industrial shop floors. These attributes support faster set-ups and easier part access, contributing to smoother cycle times and reduced downtime. Durable operation and simple integration Constructed for daily industrial use, the clamp combines a solid mechanical design with straightforward mounting to integrate into existing tooling systems. The lever mechanism offers quick, repeatable clamping without complex adjustment, while the compact form factor allows multiple clamps to be used close together on a single jig. The item is identified as B211-1-D-C1 and can be checked against the GTIN for procurement and inventory management. The combination of durable components and simple mechanics makes this a practical choice for production and maintenance teams seeking dependable, low-complexity fixturing. Choose the Kukamet vertical clamp for robust, compact clamping — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for detailed advice or to place an order Technical Data Article number: B211-1-D-C1 GTIN: 8682843522240 Model: 211 Manufacturer: Kukamet Facts Arm length: 44 mm Holding force: 1,000 N Actuation (pressing) force: 750 N Weight: 0.138 kg eClass: 21041717 ETIM: EC011973 Special features Mounting: horizontal foot Material/finish: blackened finish Massive holding arm Category: Clamping technology Catalogue page available: 211-D-katalogseite.pdf FAQ What holding force can be expected from this clamp? The Vertical clamp 211 by Kukamet provides a maximum holding force of 1,000 N (SKU B211-1-D-C1), ensuring secure retention for many standard assembly and machining tasks. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, which allows low-profile attachment to fixture plates or subplates for compact setups and easy integration into existing tooling. What is the arm reach and how does that affect applicability? The clamp has a 44 mm arm, offering a short reach that is ideal for tight layouts and closely spaced clamping points where minimal projection is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
44mm Vertical Clamp With Solid Holding Arm, 750N Closing Force, Zinc Plated - Kukamet
Robust, galvanised construction combined with a massive holding arm and up to 1,000 N holding force ensures dependable clamping in compact fixtures. Order the 212 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 212 Vertical Clamp — galvanised, 1,000 N holding force The 212 is a vertical clamp designed for fixture and jig use, featuring a massive holding arm and a vertical-foot mounting for space-saving integration. Massive holding arm for stable clamping Galvanised steel for corrosion resistance Vertical-foot mounting for compact fixture integration Consistent clamping for production-grade repeatability A solid clamping solution delivers measurable benefits in repeat production. The holding force of 1,000 N and a pressing force of 750 N allow consistent retention of workpieces during machining and assembly processes, reducing cycle-time variability. By specifying a clamp with defined force values, process engineers gain a predictable parameter for fixture design and quality assurance. The mechanical action is straightforward and requires minimal maintenance, ensuring high uptime in production environments. Space-saving mounting with straightforward integration Compact fixtures demand components that save space without compromising performance. The vertical-foot mounting and the 44 mm arm provide a low-profile footprint that is easy to incorporate into jigs and specialised tooling. At approximately 0.138 kg, the unit is lightweight yet robust, enabling multiple clamps to be installed without adding excessive mass to the assembly. This combination supports modular fixture concepts and simplifies retrofitting existing workholding systems. Built for workshop conditions and longevity Constructed from galvanised material and equipped with a massive holding arm, the clamp resists corrosion and mechanical wear typical in industrial workshops. The corrosion protection extends service life and reduces the need for frequent part replacement, supporting cost-effective operations. The clamp’s lever-type design provides a clear mechanical advantage, making it suitable for repetitive clamping tasks where reliability is a priority. Practical applications and compatibility with fixtures The vertical clamp is suitable for securing components in jigs, assembly stations and light-duty machining fixtures. Its defined force characteristics and compact mounting make it a practical choice for metalworking and general workshop use where repeatable retention is required. Specifying this clamp in fixture drawings simplifies procurement and ensures the clamp’s performance aligns with the intended holding requirements. For specification support or to procure the 212 vertical clamp with galvanised construction and 1,000 N holding force, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: 212-1-D-C1 GTIN: 8680731505832 eClass: 21041717 ETIM: EC011973 Facts Holding force: 1,000 N Pressing force (max): 750 N Arm diameter/width: 44 mm Weight: 0.138 kg Special features Galvanised material Vertical-foot mounting Massive holding arm Lever-clamp type FAQ What holding and pressing forces does the 212 vertical clamp provide? The 212 vertical clamp offers a holding force of 1,000 N and a maximum pressing force of 750 N, giving clearly defined retention values for fixture design. Can the clamp be mounted in tight fixture spaces? Yes, the vertical-foot mounting and 44 mm arm allow the clamp to be integrated into compact jigs and modular fixtures with a small footprint. Is the 212 vertical clamp suitable for industrial workshop environments? The galvanised construction and robust holding arm make the 212 vertical clamp suitable for typical workshop conditions where corrosion resistance and durability are required. How does the clamp support repeatability in production? Defined mechanical forces and a stable lever action ensure consistent clamping cycles, which supports repeatable results in machining and assembly operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com